EZS. Motorized Linear Slides. Series. RoHS-Compliant

Size: px
Start display at page:

Download "EZS. Motorized Linear Slides. Series. RoHS-Compliant"

Transcription

1 RoHS-Compliant Motorized Linear Slides EZS Series AUDIN -, avenue de la malle Saint Brice Courcelles - Tel : Fax : Web : http: info@audin.fr

2 RoHS-Compliant Motorized Linear Slides Series The high-precision, compact body was made possible by adopting a rolled ball screw and guide frame structure. The compact design facilitates installation and wiring to your system for added convenience. Features Adopting a Closed-Loop Stepping Motor, This Linear Slide Eliminates Misstep and Hunting, while Attaining High-Speed and High-Response Operation. The linear slide has no hunting problem upon stopping. The vibration and noise levels have been lowered by employing advanced technology that produces smoothness comparable to a microstep driver. High-Speed Positioning Carrying a Heavy Load Easy Wiring between the Linear Slide and Controller The linear slide and controller are connected via a single cable, and the wiring distance can be extended to a maximum of m. The cable is fitted with a connector for quick connection. Maximum of 1 m for VDC products. The motor cable is sold separately. EZS (lead: mm): Maximum transportable mass kg EZS3, EZS, EZS (lead: 1 mm): Maximum speed mm/s (Single-phase -3 VAC Input) The Total Length of Linear Slide is Shorter for Every or Model. EZS3, EZS: Total length of linear slide 9.5 mm Since the space outside the linear slide's operating range is minimized, the overall system size can be reduced. The connector is attached at the end of the cable for easy connection. Flexible Conduit The motor cable is sold separately. The cable can be placed in a flexible conduit or cable gland with an inner diameter of 1.5 mm. AUDIN -, avenue de la malle Saint Brice Courcelles - Tel : Fax : Web : http: info@audin.fr

3 General Specifications of Motor General specifications of controller Page 31 This is the value after rated operation under normal ambient temperature and humidity. VDC Item Specification 1 M or more when 5 VDC megger is applied between the following places: Insulation Motor case Motor/Sensor windings Resistance Motor case Windings of electromagnetic brake (Only for electromagnetic brake type) Sufficient to withstand the following for 1 minute: Dielectric Motor case Motor/Sensor windings.5 kvac 5 Hz Strength Motor case Windings of electromagnetic brake (Only for electromagnetic brake type).5 kvac 5 Hz Ambient Temperature C (non-freezing) Ambient Humidity 5% or less (non-condensing) Single-Phase -3 VAC Item Insulation Resistance Dielectric Strength Specification 1 M or more when 5 VDC megger is applied between the following places: Motor case Motor/Sensor windings Motor case Windings of electromagnetic brake (Only for electromagnetic brake type) Sufficient to withstand the following for 1 minute: Motor case Motor/Sensor windings EZS3, EZS: 1. kvac 5 Hz EZS: 1.5 kvac 5 Hz Motor case Windings of electromagnetic brake (Only for electromagnetic brake type) 1. kvac 5 Hz C (non-freezing) 5% or less (non-condensing) Ambient Temperature Ambient Humidity Note: Do not measure insulation resistance or perform the dielectric strength test while the linear slide and controller are connected. Safety Standards and CE Marking Power Supply Model CE Marking Linear slide VDC EMC Directives Controller Single-phase Linear slide Low Voltage Directive -3 VAC Controller EMC Directives The EMC value changes according to the wiring and layout. Therefore, the final EMC level must be checked with the motor/driver incorporated in the user's equipment. If you require EMC data of linear slides or controllers, please contact your nearest Oriental Motor office. Machinery Directive (9/37/EC) The linear slides, controllers and teaching pendants are designed and manufactured for use in general industrial equipment as an internal component, and therefore need not comply with the Machinery Directive. However, each product has been evaluated under the following standards to ensure proper operation: EN ISO 11-1, EN ISO 11-, EN 15, EN -1 Emergency Stop Function The emergency stop circuits in the teaching pendant and controller are designed to the requirements under EN 95-1, Category 1. See page 3 for a connection example that conforms to Stop Category (non-controlled stop) under EN -1. Emergency Stop Circuit The customer must provide an appropriate emergency stop circuit by conducting risk assessment based on your system. Maintenance-Free for Long-Term Performance The drive method uses a ball screw, while the guide mechanism adopts the LM Guide. The ball screw employs the QZ lubrication system, while the LM Guide uses the Ball Retainer to retain the coupled rolling elements. These mechanisms give the system a considerable duration of maintenance-free performance. QZ lubrication system (THK): High-density fiber net supplies appropriate amounts of oil, thereby preventing oil wastage and reducing environmental burden. Ball Retainer : Individual balls are retained in a manner allowing smooth rotation while preventing contact with adjacent balls. Use of the Ball Retainer provides long-term, maintenance-free operating conditions and other benefits. Ball Retainer and LM Guide are registered trademarks of THK Co., Ltd. Order Your Linear Slide with the Necessary RoHS-Compliant The Series conforms to the RoHS Directive that prohibits the used of six chemical substances including lead and cadmium. RoHS (Restriction of Hazardous Substances) Directive: Directive on restriction of the use of certain hazardous substances in electrical and electronic equipment (/95/EC). The RoHS Directive prohibits the use of six chemical substances in electrical and electronic products sold in EU member states on or after July 1,. The six controlled substances are: lead, hexavalent chromium, cadmium, mercury and two specific brominated flame-retardants (PBB and PBDE). Range of selectable strokes: 5 to 5 mm EZS3, EZS: 5 to 7 mm EZS: 5 to 5 mm Each model is available with strokes in 5 mm increments. AUDIN -, avenue de la malle Saint Brice Courcelles - Tel : Fax : Web : http: info@audin.fr3

4 Combining all functions needed to operate a linear slide in positioning operations Features Positioning Data of up to 3 Points Can be Set with Ease Position data can be set in one of three methods, as specified below (when the controller is used in the controller mode). Enter the desired travel (mm) directly. Direct teaching Move the table to the target position by manual, and store the achieved position as positioning data. Two Positioning Data Settings You can set positioning data in the absolute mode or incremental mode, depending on your preferred movement of the equipment. Absolute Mode: Each position is set as the absolute position with respect to the reference point. This is suitable when you want to move the work directly from an arbitrary position to the specified position. Target Position C (5 mm) 5 mm Reference Point Target Position A (1 mm) 1 mm Target Position B (1 mm) 1 mm Remote teaching Move the table to the target position using a teaching pendant or data editing software, and store the achieved position as positioning data. Incremental Mode: Each position is relative, being set as an amount of travel from the current position or another target position for the work. This is done in a regular feed or other operation where the same pattern is used repeatedly. Reference Point Target Position C Target Position A (1 mm) (5 mm) Target Position B (1 mm) 1 mm mm 3 mm Travel Amount Setting (Example) Target Position Travel Amount Setting Absolute Mode Incremental Mode A 1 1 B 1 C 5 3 Two Data Execution Modes: Selective Positioning and Sequential Positioning Selective Positioning Mode: The set data can be selected at random. Return to Home Operation Selection of Positioning Data Start Data No.1 Data No. Data No. Data No.3 Sequential Positioning Mode: Positioning operation is performed sequentially from the desired data. Return to Home Operaton The first operation starts. Data No.1 The second operation starts. Data No. The nd operation starts. Data No. The 3rd operation starts. Data No.3 The th operation starts. AUDIN -, avenue de la malle Saint Brice Courcelles - Tel : Fax : Web : http: info@audin.fr

5 Area Output Function A signal is output when the linear slide table enters a set area arbitrarily set along the stroke. One set area can be set. Area Output Signal ON OFF Entering the Area! Entering the Area Within the Set Area Set Area Exiting the Area Operation Using External Pulse Input The can be combined with your existing controller to serve as a driver controlling the linear slide by pulse input. Controller Mode Driver Mode Teaching Function Monitoring Function Pause Function Area Output Function Absolute Type Sensorless Return to Home Return to Home Using Sensor Data must be set from the teaching pendant or data setting software. Normal System Configuration Controller Mode The linear slide is controlled by selecting positioning data preset in the controller. Programmable Controller Linear Slide Controller Linked Operation Up to four operation data can be linked, thereby allowing the linear slide to change speeds without stopping. Data with the same operation direction can be linked. Speed Operating Speed Operating Speed 1 Operating Speed 3 Time Separate Acceleration and Deceleration Settings Acceleration and deceleration can be set separately. Speed Quick Acceleration Slow Deceleration When Combined with the Customer's Controller Driver Mode The linear slide is controlled by inputting pulse signals. Programmable Controller Linear Slide Controller Customer's Controller Output of Current Position and Error Code The current position, error code and certain other data can be output to an external device. Programmable Controller Request (Command) Linear Motion Controller I/O Output the current position or error code, etc. Choice of Two Return to Home Methods Sensorless Return to Home Return to home is performed without the use of external sensors. The home position can be adjusted, and the direction of return to home can also be changed. Return to Home Using Sensors Return to home is performed using home sensors. The sensors are available as accessories (sold separately). Sensor set Page 37 Time AUDIN -, avenue de la malle Saint Brice Courcelles - Tel : Fax : Web : http: info@audin.fr5

6 Functions of Teaching Pendant (EZT1) and Data Editing Software (EZED) The teaching pendant and data editing software are available. Choose an appropriate accessory based on the required functions. Teaching Pendant (Sold separately) Data Editing Software (Sold separately) Cable of Teaching Pendant or PC Interface Cable Teaching Pendant (EZT1)/Data Editing Software (EZED) Function Comparison Table Item Function Teaching Pendant (Model: EZT1) Data Editing Software (Model: EZED) Cable Length 5 m 5 m 1 Display LCD 17 characters lines PC screen Emergency Stop Switch Operation Data Setting Parameter Setting Teaching Function (Direct/Remote) Operation Data Monitoring I/O & Alarm History Monitoring Waveform Monitoring Test Operation Data Copy Printing Function 1 PC interface cable (included) is used. The printing function is not available on computers running Windows 9, Me. Data Editing Software (Sold separately) Model: EZED Teaching Pendant (Sold separately) Model: EZT1 All functions required for operation and adjustment, including setting of positioning data, test operation, and I/O monitoring, are provided. The dialogue-type user interface ensures easy operation. All you need is to enter values in the necessary fields. No dedicated power supply is necessary. Simply connect the cable to the controller. All functions required for operation and adjustment, including setting of positioning data, test operation, and I/O monitoring, are provided. Running on any Windows computer, the software is a graphic navigation tool that guides you through various operations in easy steps. This user-friendly feature makes this ideal accessory for editing large volumes of data. You can also access waveform monitoring, data copy and other features not available on the teaching pendant. Data Editing Test Operation Waveform Monitoring Status Monitoring AUDIN -, avenue de la malle Saint Brice Courcelles - Tel : Fax : Web : http: info@audin.fr

7 Selection of Motorized Linear Slides Series Linear Slide Size EZS3 EZS EZS Linear Slide Width Height 5 mm 5 mm 7 mm 5 mm 7 mm.5 mm Power Supply Voltage VDC Single-Phase Single-Phase VDC Single-Phase VDC -3 VAC -3 VAC -3 VAC Lead [mm] Maximum MP. 5.7 Load Moment MY 1.5 [Nm] MR Maximum Transportable Mass in Horizontal Direction [kg] Maximum Transportable Mass in Vertical Direction [kg] Maximum Speed [mm/s] Repetitive Positioning Accuracy [mm] [mm] 5 mm Increments Electromagnetic Brake With electromagnetic brake or without electromagnetic brake are available For the single-phase VAC models, please contact the nearest Oriental Motor sales office AUDIN -, avenue de la malle Saint Brice Courcelles - Tel : Fax : Web : http: info@audin.fr7

8 Selection Calculations After you have determined which series to use, select an appropriate model. Select a linear slide of the size that satisfies your desired condition. Select an appropriate model by following the steps below. (1) Select a Linear Slide Satisfying the Transportable Mass By referring to "specifications of linear slide," select a linear slide satisfying the transportable mass. Condition: Drive a work of over a horizontal distance of mm within 1.5 seconds. EZS: Specifications of Width 7 mm Height 5 mm, VDC Linear Slide Specifications of Linear Slide Drive Method Rolled Ball Screw Repetitive Positioning Accuracy [mm]. Resolution [mm].1 Traveling Parallelism [mm].3 Maximum Load Moment [Nm] MP: MY: MR: 7. Lead Transportable Mass [kg] Maximum Speed () [mm/s] Thrust Electromagnetic Brake Model [mm] Horizontal Vertical 555mm mm 5mm 7mm [N] Holding Force [N] EZSD-K EZSDM-K 7 7 EZSE-K EZSEM-K 1 1 Enter the stroke in the box () within the model name. Based on the "condition" and "specifications of linear slide," select EZSD-K. () Check the Positioning Time From the graph "positioning distance positioning time" below, check if the selected linear slide satisfies the desired positioning time. As a rough guideline, the positioning time required by the selected linear slide corresponds to the positioning time identified from the graph, multiplied by the "positioning time coefficient" applicable to the linear slide. From the graph, find the "positioning time of 1. s" for the "positioning distance of mm." You obtain the "positioning time of 1. s." Since the stroke is below 55 mm, multiply "positioning time of 1. s" by the "positioning time coefficient of 1." to obtain an approximate positioning time. Notes: The calculated positioning time does not include the settling time. Use a settling time of.15 s as a reference. The running duty, which represents the relationship of running time and stopping time, should be kept to 5% or below (reference). Running duty [%] running time [s]1/ (running time [s] stopping time [s]) Positioning Distance Positioning Time EZSD (Lead: 1 mm) Horizontal Installation 1. s kg Positioning Time Coefficient Horizontal Installation Vertical Installation [mm] kg kg 3.5 kg 7 kg AUDIN -, avenue de la malle Saint Brice Courcelles - Tel : Fax : Web : http: info@audin.fr

9 (3) Check the Operating Speed and Acceleration of the Linear Slides The time calculated from "positioning distance positioning time" assumes the operating speed and acceleration that achieve the shortest positioning time. Check the specific operating speed and acceleration at which to drive the linear slides based on the time calculated in step (). Operating Speed and Acceleration of the Linear Slides Check the operating speed and acceleration by referring to "positioning distance operating speed" and "positioning distance acceleration." If the identified speed exceeds the maximum speed specified in specifications of linear slide, use the maximum speed specified in specifications of linear slide as the operating speed of the linear slide. Example) For a positioning distance of mm on the graph, the operating speed is mm/s, and the acceleration is 1.5 m/s. EZSD-K [Positioning Distance Operating Speed] 7 Maximum Speed by mm/s [mm] Max. Speed [mm/s] kg EZSD-K [Positioning Distance Acceleration] Acceleration [m/s ] m/s kg () Check the Load Moment Calculate the load that will generate under the applicable condition, and confirm that the calculated result is smaller than the "maximum load moment specified in specifications of linear slide." If the maximum load moment is exceeded, select another model. The maximum load has been calculated by considering the estimated traveling life of each model. If a given model is operated at load exceeding the designed limit, the life of the linear slide will decrease. The life is also affected by the operating environment and conditions. MP MY MR AUDIN -, avenue de la malle Saint Brice Courcelles - Tel : Fax : Web : http: info@audin.fr9

10 Positioning Distance Operating Speed, Positioning Distance Acceleration EZS3D-K (Lead 1 mm, VDC) Horizontal Installation Positioning Distance Operating Speed kg kg Vertical Installation Positioning Distance Operating Speed kg kg 3.5 kg EZS3E-K (Lead mm, VDC) Horizontal Installation Positioning Distance Operating Speed kg Vertical Installation Positioning Distance Operating Speed kg 3.5 kg 7 kg Maximum Speed by [mm] Max. Speed [mm/s] Maximum Speed by [mm] Max. Speed [mm/s] Maximum Speed by [mm] Max. Speed [mm/s] Maximum Speed by [mm] Max. Speed [mm/s] Positioning Distance Acceleration Acceleration [m/s ] kg kg Positioning Distance Acceleration Acceleration [m/s ] kg kg 3.5 kg Positioning Distance Acceleration Acceleration [m/s ] kg Positioning Distance Acceleration Acceleration [m/s ] kg 3.5 kg 7 kg EZS3D-C (Lead 1 mm, Single-Phase -3 VAC) Horizontal Installation Positioning Distance Operating Speed Maximum Speed by 9 [mm] kg kg Max. Speed [mm/s] Positioning Distance Acceleration Acceleration [m/s ] kg kg Vertical Installation Positioning Distance Operating Speed kg kg 3.5 kg Maximum Speed by [mm] Max. Speed [mm/s] Positioning Distance Acceleration Acceleration [m/s ] kg kg 3.5 kg AUDIN -, avenue de la malle Saint Brice Courcelles - Tel : Fax : Web : http: info@audin.fr

11 EZS3E-C (Lead mm, Single-Phase -3 VAC) Horizontal Installation Positioning Distance Operating Speed Maximum Speed by 7 [mm] kg Max. Speed [mm/s] Positioning Distance Acceleration Acceleration [m/s ] kg Vertical Installation Positioning Distance Operating Speed kg 3.5 kg 7 kg EZSD-K (Lead 1 mm, VDC) Horizontal Installation Positioning Distance Operating Speed Vertical Installation Positioning Distance Operating Speed kg 3.5 kg 7 kg EZSE-K (Lead mm, VDC) Horizontal Installation Positioning Distance Operating Speed Vertical Installation Positioning Distance Operating Speed kg kg 7 kg 1 kg kg 3 kg Maximum Speed by [mm] Max. Speed [mm/s] Maximum Speed by [mm] Max. Speed [mm/s] Maximum Speed by [mm] Max. Speed [mm/s] Maximum Speed by [mm] Max. Speed [mm/s] Maximum Speed by [mm] Max. Speed [mm/s] Positioning Distance Acceleration Acceleration [m/s ] kg 3.5 kg Positioning Distance Acceleration Acceleration [m/s ] Positioning Distance Acceleration Acceleration [m/s ] kg 3.5 kg 7 kg Positioning Distance Acceleration Acceleration [m/s ] Positioning Distance Acceleration Acceleration [m/s ] kg kg 3 kg kg 7 kg 1 kg AUDIN -, avenue de la malle Saint Brice Courcelles - Tel : Fax : Web : http: info@audin.fr 11

12 EZSD-C (Lead 1 mm, Single-Phase -3 VAC) Horizontal Installation Positioning Distance Operating Speed Maximum Speed by 9 [mm] kg Max. Speed [mm/s] Positioning Distance Acceleration Acceleration [m/s ] kg Vertical Installation Positioning Distance Operating Speed kg 3.5 kg 7 kg Maximum Speed by [mm] Max. Speed [mm/s] Positioning Distance Acceleration Acceleration [m/s ] kg 3.5 kg 7 kg EZSE-C (Lead mm, Single-Phase -3 VAC) Horizontal Installation Positioning Distance Operating Speed Maximum Speed by 7 [mm] kg 3 kg Max. Speed [mm/s] Positioning Distance Acceleration Acceleration [m/s ] kg 3 kg Vertical Installation Positioning Distance Operating Speed kg 7 kg 1 kg EZSD-K (Lead 1 mm, VDC) Horizontal Installation Positioning Distance Operating Speed Vertical Installation Positioning Distance Operating Speed kg 3 kg kg Maximum Speed by [mm] Max. Speed [mm/s] Maximum Speed by [mm] Max. Speed [mm/s] Maximum Speed by [mm] Max. Speed [mm/s] Positioning Distance Acceleration Acceleration [m/s ] kg 7 kg 1 kg Positioning Distance Acceleration Acceleration [m/s ] Positioning Distance Acceleration Acceleration [m/s ] kg 3 kg kg AUDIN -, avenue de la malle Saint Brice Courcelles - Tel : Fax : Web : http: info@audin.fr

13 EZSE-K (Lead mm, VDC) Horizontal Installation Positioning Distance Operating Speed kg 3 kg kg Maximum Speed by [mm] Max. Speed [mm/s] Positioning Distance Acceleration Acceleration [m/s ] 1 kg 3 kg kg Vertical Installation Positioning Distance Operating Speed kg 3 kg Maximum Speed by [mm] Max. Speed [mm/s] Positioning Distance Acceleration Acceleration [m/s ] 1 kg 3 kg EZSD-C (Lead 1 mm, Single-Phase -3 VAC) Horizontal Installation Positioning Distance Operating Speed Maximum Speed by 9 [mm] kg 3 kg Max. Speed [mm/s] Positioning Distance Acceleration Acceleration [m/s ] kg 3 kg Vertical Installation Positioning Distance Operating Speed kg Maximum Speed by [mm] Max. Speed [mm/s] Positioning Distance Acceleration Acceleration [m/s ] kg EZSE-C (Lead mm, Single-Phase -3 VAC) Horizontal Installation Positioning Distance Operating Speed Maximum Speed by 7 [mm] kg 3 kg kg Max. Speed [mm/s] Positioning Distance Acceleration Acceleration [m/s ] 1 kg 3 kg kg Vertical Installation Positioning Distance Operating Speed kg 3 kg Maximum Speed by [mm] Max. Speed [mm/s] Positioning Distance Acceleration Acceleration [m/s ] 1 kg 3 kg AUDIN -, avenue de la malle Saint Brice Courcelles - Tel : Fax : Web : http: info@audin.fr 13

14 System Configuration Controller Mode Required Products (Sold separately) Motor Cables ( Page 37) Teaching Pendant ( Page 39) Data Editing Software ( Page 39) Choose the teaching pendant or data editing software. EZS Series (Body) Linear Slide Computer (Not supplied) Programmable Controller (Not supplied) Connected by the customer Linear Motion Controller Selectable Accessories and Peripheral Equipment (Sold separately) AC or DC Power Supply (Main Power Supply) VDC Power Supply (For Control) Dual Axes Mounting Brackets ( Page ) Cable Holders ( Page ) Example of Biaxial Combination Sensor Set ( Page 37) Sensor Extension Cables ( Page 3) I/O Cables ( Page 1) No. Product Name Overview Page Motor Cables Teaching Pendant Dedicated cable for connecting the linear slide and controller (1 to m). Be sure to purchase this cable. This pendant lets you set and operate various data at your fingertips. Comes with a 5 m cable Data Editing Software This software lets you set and edit various data on a computer. Comes with a dedicated communication cable (5 m). 39 Dual Axes Mounting Brackets Bracket that makes combination of two axes easy. Cable Holders This cable holder protects and guides cables in dual- or three-axis configurations. Sensor Set Sensor Extension Cables I/O Cables Three sets of sensors, sensor mounting brackets and cables with connector ( m), as well as a shield plate. Cable for connecting the controller and sensor (1 m, m). Cable for connecting the controller and host controller (1 m, m) Example of System Configuration (Body) (Sold separately) EZS Series Motor Cable ( m) EZS3E5-C CCES- Teaching Pendant EZT1 (Sold separately) I/O Cable (1 m) CC3D1-1 Sensor Extension Cable ( m) CCD-1 Sensor Set PAES-SY Not required if return to home operation is performed without sensors. The system configuration shown above is an example. Other combinations are available. 1AUDIN -, avenue de la malle Saint Brice Courcelles - Tel : Fax : Web : http: info@audin.fr

15 Driver Mode When performing return to home operation using the linear motion controller, refer to system configuration on page 1. Teaching pendant or data editing software is required to change parameters (I/O logic, etc.) of the linear motion controller. Required Products (Sold separately) Motor Cables ( Page 37) EZS Series (Body) Linear Slide Connected by the customer Linear Motion Controller Programmable Controller (Not supplied) Selectable Accessories and Peripheral Equipment (Sold separately) AC or DC Power Supply (Main Power Supply) VDC Power Supply (For Control) Dual Axes Mounting Brackets ( Page ) Cable Holders ( Page ) Example of Biaxial Combination Sensor Set ( Page 37) I/O Cables ( Page 1) No. Product Name Overview Page Motor Cables Dedicated cable for connecting the linear slide and controller (1 to m). Be sure to purchase this cable. 37 Dual Axes Mounting Brackets Bracket that makes combination of two axes easy. Cable Holders This cable holder protects and guides cables in dual- or three-axis configurations. Sensor Set Three sets of sensors, sensor mounting brackets and cables with connector ( m), as well as a shield plate. 37 I/O Cables Cable for connecting the controller and host controller (1 m, m). 1 Example of System Configuration (Body) (Sold separately) EZS Series EZS3E5-C Motor Cable ( m) CCES- (Sold separately) Sensor Set PAES-SY I/O Cable (1 m) CC3D1-1 The system configuration shown above is an example. Other combinations are available. Note: Sensorless return to home operation is not available. AUDIN -, avenue de la malle Saint Brice Courcelles - Tel : Fax : Web : http: info@audin.fr 15

16 Product Number Code EZS 3 D 5 M - K Series EZS: Series Linear Slide Size Lead D: 1 mm E: mm 3: Width: 5 mm Height: 5 mm : Width: 7 mm Height: 5 mm : Width: 7 mm Height:.5 mm 5: 5 mm 1: 1 mm 15: 15 mm : mm 5: 5 mm 3: 3 mm 35: 35 mm : mm 5: 5 mm 5: 5 mm 55: 55 mm : mm 5: 5 mm 7: 7 mm 75: 75 mm : mm 5: 5 mm Electromagnetic Brake None: Without Electromagnetic Brake M: With Electromagnetic Brake Power Supply Input K: VDC A: Single-Phase VAC C: Single-Phase -3 VAC Product Line EZS3 Without Electromagnetic Brake With Electromagnetic Brake VDC Single-Phase VAC Single-Phase -3 VAC VDC Single-Phase VAC Single-Phase -3 VAC Model Model Model Model Model Model 5 mm EZS35-K EZS35-A EZS35-C EZS35M-K EZS35M-A EZS35M-C 1 mm EZS31-K EZS31-A EZS31-C EZS31M-K EZS31M-A EZS31M-C 15 mm EZS315-K EZS315-A EZS315-C EZS315M-K EZS315M-A EZS315M-C mm EZS3-K EZS3-A EZS3-C EZS3M-K EZS3M-A EZS3M-C 5 mm EZS35-K EZS35-A EZS35-C EZS35M-K EZS35M-A EZS35M-C 3 mm EZS33-K EZS33-A EZS33-C EZS33M-K EZS33M-A EZS33M-C 35 mm EZS335-K EZS335-A EZS335-C EZS335M-K EZS335M-A EZS335M-C mm EZS3-K EZS3-A EZS3-C EZS3M-K EZS3M-A EZS3M-C 5 mm EZS35-K EZS35-A EZS35-C EZS35M-K EZS35M-A EZS35M-C 5 mm EZS35-K EZS35-A EZS35-C EZS35M-K EZS35M-A EZS35M-C 55 mm EZS355-K EZS355-A EZS355-C EZS355M-K EZS355M-A EZS355M-C mm EZS3-K EZS3-A EZS3-C EZS3M-K EZS3M-A EZS3M-C 5 mm EZS35-K EZS35-A EZS35-C EZS35M-K EZS35M-A EZS35M-C 7 mm EZS37-K EZS37-A EZS37-C EZS37M-K EZS37M-A EZS37M-C Enter D (1 mm) or E ( mm) (lead length) in the box () within the model name. For the single-phase VAC models, please contact the nearest Oriental Motor sales office. EZS Without Electromagnetic Brake With Electromagnetic Brake VDC Single-Phase VAC Single-Phase -3 VAC VDC Single-Phase VAC Single-Phase -3 VAC Model Model Model Model Model Model 5 mm EZS5-K EZS5-A EZS5-C EZS5M-K EZS5M-A EZS5M-C 1 mm EZS1-K EZS1-A EZS1-C EZS1M-K EZS1M-A EZS1M-C 15 mm EZS15-K EZS15-A EZS15-C EZS15M-K EZS15M-A EZS15M-C mm EZS-K EZS-A EZS-C EZSM-K EZSM-A EZSM-C 5 mm EZS5-K EZS5-A EZS5-C EZS5M-K EZS5M-A EZS5M-C 3 mm EZS3-K EZS3-A EZS3-C EZS3M-K EZS3M-A EZS3M-C 35 mm EZS35-K EZS35-A EZS35-C EZS35M-K EZS35M-A EZS35M-C mm EZS-K EZS-A EZS-C EZSM-K EZSM-A EZSM-C 5 mm EZS5-K EZS5-A EZS5-C EZS5M-K EZS5M-A EZS5M-C 5 mm EZS5-K EZS5-A EZS5-C EZS5M-K EZS5M-A EZS5M-C 55 mm EZS55-K EZS55-A EZS55-C EZS55M-K EZS55M-A EZS55M-C mm EZS-K EZS-A EZS-C EZSM-K EZSM-A EZSM-C 5 mm EZS5-K EZS5-A EZS5-C EZS5M-K EZS5M-A EZS5M-C 7 mm EZS7-K EZS7-A EZS7-C EZS7M-K EZS7M-A EZS7M-C Enter D (1 mm) or E ( mm) (lead length) in the box () within the model name. For the single-phase VAC models, please contact the nearest Oriental Motor sales office. 1AUDIN -, avenue de la malle Saint Brice Courcelles - Tel : Fax : Web : http: info@audin.fr

17 EZS3 EZS EZS EZS Without Electromagnetic Brake With Electromagnetic Brake VDC Single-Phase VAC Single-Phase -3 VAC VDC Single-Phase VAC Single-Phase -3 VAC Model Model Model Model Model Model 5 mm EZS5-K EZS5-A EZS5-C EZS5M-K EZS5M-A EZS5M-C 1 mm EZS1-K EZS1-A EZS1-C EZS1M-K EZS1M-A EZS1M-C 15 mm EZS15-K EZS15-A EZS15-C EZS15M-K EZS15M-A EZS15M-C mm EZS-K EZS-A EZS-C EZSM-K EZSM-A EZSM-C 5 mm EZS5-K EZS5-A EZS5-C EZS5M-K EZS5M-A EZS5M-C 3 mm EZS3-K EZS3-A EZS3-C EZS3M-K EZS3M-A EZS3M-C 35 mm EZS35-K EZS35-A EZS35-C EZS35M-K EZS35M-A EZS35M-C mm EZS-K EZS-A EZS-C EZSM-K EZSM-A EZSM-C 5 mm EZS5-K EZS5-A EZS5-C EZS5M-K EZS5M-A EZS5M-C 5 mm EZS5-K EZS5-A EZS5-C EZS5M-K EZS5M-A EZS5M-C 55 mm EZS55-K EZS55-A EZS55-C EZS55M-K EZS55M-A EZS55M-C mm EZS-K EZS-A EZS-C EZSM-K EZSM-A EZSM-C 5 mm EZS5-K EZS5-A EZS5-C EZS5M-K EZS5M-A EZS5M-C 7 mm EZS7-K EZS7-A EZS7-C EZS7M-K EZS7M-A EZS7M-C 75 mm EZS75-K EZS75-A EZS75-C EZS75M-K EZS75M-A EZS75M-C mm EZS-K EZS-A EZS-C EZSM-K EZSM-A EZSM-C 5 mm EZS5-K EZS5-A EZS5-C EZS5M-K EZS5M-A EZS5M-C Enter D (1 mm) or E ( mm) (lead length) in the box () within the model name. For the single-phase VAC models, please contact the nearest Oriental Motor sales office. The following items are included in each product. Linear Slide, Allen-Head Bolt for Affixing Linear Slide, Controller, Mounting Bracket for Controller, User I/O Connector, Sensor I/O Connector, Operating Manual AUDIN -, avenue de la malle Saint Brice Courcelles - Tel : Fax : Web : http: info@audin.fr 17

18 Adopting Motor, Rolled Ball Screw Specification EZS3: 5 mm (W) 5 mm (H), VDC Maximum Transportable Mass: Horizontal /Vertical 7 kg : 5 to 7 mm (in 5 mm increments) Specifications of Linear Slide Drive Method Rolled Ball Screw Repetitive Positioning Accuracy [mm]. Resolution [mm].1 Traveling Parallelism [mm].3 Maximum Load Moment [Nm] MP:. MY:. MR: 1.5 Lead Transportable Mass [kg] Maximum Speed () [mm/s] Thrust Electromagnetic Brake Model [mm] Horizontal Vertical 555 mm mm 5 mm 7 mm [N] Holding Force [N] EZS3D-K EZS3DM-K EZS3E-K EZS3EM-K 7 Enter the stroke length in the box () within the model name. This applies when the linear slide is installed from the base surface. Product Number Code EZS 3 D 5 M - K Series EZS: Series Linear Slide Size 3: Width: 5 mm Height: 5 mm Lead D: 1 mm E: mm 5 (5 mm) 7 (7 mm) Electromagnetic Brake None: Without Electromagnetic Brake M: With Electromagnetic Brake Power Supply Input K: VDC Linear Slide/Controller Combinations Model names for linear slide and controller combinations are shown below. Electromagnetic Brake Model Linear Slide Model Controller Model EZS3D-K EZSM3DK Not equipped EZS3E-K EZSM3EK ESMC-K EZS3DM-K EZSM3DMK Equipped EZS3EM-K EZSM3EMK Enter the stroke length in the box () within the model name. Positioning Distance Positioning Time Check the (approximate) positioning time from the positioning distance. As a rough guideline, the positioning time by the linear slide corresponds to the positioning time calculated from the graph, multiplied by the positioning time coefficient corresponding to the applicable stroke. See page 1 for operation speed and acceleration. EZS3D (Lead: 1 mm) Horizontal Installation kg kg EZS3E (Lead: mm) Horizontal Installation kg Vertical Installation kg kg 3.5 kg Vertical Installation kg 3.5 kg 7 kg Positioning Time Coefficient [mm] Horizontal Installation Vertical Installation kg kg kg kg 3.5 kg Positioning Time Coefficient [mm] Horizontal Installation Vertical Installation kg kg 3.5 kg 7 kg Notes: The positioning time in the graph does not include the settling time. Use a settling time of.15 s as a reference. The starting speed should be mm/s or less. 1 Features P. / Motor Specifications P.3 / System Configuration P.1 / Product Line P.1 AUDIN -, avenue de la malle Saint Brice Courcelles - Tel : Fax : Web : http: info@audin.fr

19 Dimensions of Linear Slide (Unit = mm) L , 9.5 Counterbore.1 3 Deep (19.5 for the electromagnetic brake type) C L Detail View of Table Surface at C 1 Return to Home Operation Range Positioning Range Counter-Motor Side Home Position Motor Side Home Position.5.5 Mounting Reference Surface 3.5 AA BB Detail of Mounting Reference Surface Cables can be wired in this range. Motor Cable (Sold separately) 9 1 M.53 Deep Mounting Hole for Accessory Sensor Set.1 3H( ) Deep M Deep Number of Holes (n) Cables can be wired in this range A A.5 L (n1)1 nm5 Deep B B [mm] 5, 1 15, 5, 3 35, 5, 5 55, 5, 7 n Linear Slide Model: EZSM3DK, EZSM3EK (Without Electromagnetic Brake) EZSM3DMK, EZSM3EMK (With Electromagnetic Brake) L1 L Mass [kg] Electromagnetic Brake Not Equipped/Equipped Not Equipped Equipped Not Equipped/Equipped Not Equipped Equipped Numbers Specifiable in the Box () within the Linear Slide Model Name Dimensions for Linear Slide Installation (Unit = mm) 9.5 (19.5 for the Electromagnetic Brake Type) Mounting 7. Reference Surface L (n1)1 L (Positioning Pin Hole) Cable Hole (Reference) 5 (7) () M5 n Table Position at Return to Home 1.5 The mounting reference surface can be set on either side. The above figure assumes that the linear slide is mounted on its top surface. Specifications, Dimensions of Controller P.3 / Connection and Operation P.3 AUDIN -, avenue de la malle Saint Brice Courcelles - Tel : Fax : Web : http: info@audin.fr 19

20 Adopting Motor, Rolled Ball Screw Specification EZS3: 5 mm (W) 5 mm (H), Single-Phase -3 VAC Maximum Transportable Mass: Horizontal /Vertical 7 kg : 5 to 7 mm (in 5 mm increments) Specifications of Linear Slide Drive Method Rolled Ball Screw Repetitive Positioning Accuracy [mm]. Resolution [mm].1 Traveling Parallelism [mm].3 Maximum Load Moment [Nm] MP:. MY:. MR: 1.5 Lead Transportable Mass [kg] Maximum Speed () [mm/s] Thrust Electromagnetic Brake Model [mm] Horizontal Vertical 55 mm 55 mm mm 5 mm 7 mm [N] Holding Force [N] EZS3D-C EZS3DM-C EZS3E-C EZS3EM-C 7 Enter the stroke length in the box () within the model name. For the single-phase VAC models, please contact the nearest Oriental Motor sales office. This applies when the linear slide is installed from the base surface. Product Number Code EZS 3 D 5 M - C Series EZS: Series Linear Slide Size 3: Width: 5 mm Height: 5 mm Lead D: 1 mm E: mm 5 (5 mm) 7 (7 mm) Electromagnetic Brake None: Without Electromagnetic Brake M: With Electromagnetic Brake Power Supply Input C: Single-Phase -3 VAC Linear Slide/Controller Combinations Model names for linear slide and controller combinations are shown below. Electromagnetic Brake Model Linear Slide Model Controller Model EZS3D-C EZSM3DC Not equipped EZS3E-C EZSM3EC ESMC-C EZS3DM-C EZSM3DMC Equipped EZS3EM-C EZSM3EMC Enter the stroke length in the box () within the model name. Positioning Distance Positioning Time Check the (approximate) positioning time from the positioning distance. As a rough guideline, the positioning time by the linear slide corresponds to the positioning time calculated from the graph, multiplied by the positioning time coefficient corresponding to the applicable stroke. See page 1 for operation speed and acceleration. EZS3D (Lead: 1 mm) Horizontal Installation kg kg EZS3E (Lead: mm) Horizontal Installation kg Vertical Installation kg kg 3.5 kg Vertical Installation kg 3.5 kg 7 kg Positioning Time Coefficient [mm] Horizontal Installation Vertical Installation kg kg kg kg 3.5 kg Positioning Time Coefficient [mm] Horizontal Installation Vertical Installation kg kg 3.5 kg 7 kg Notes: The positioning time in the graph does not include the settling time. Use a settling time of.15 s as a reference. The starting speed should be mm/s or less. Features P. / Motor Specifications P.3 / System Configuration P.1 / Product Line P.1 AUDIN -, avenue de la malle Saint Brice Courcelles - Tel : Fax : Web : http: info@audin.fr

21 Dimensions of Linear Slide (Unit = mm) L , 9.5 Counterbore.1 3 Deep (19.5 for the electromagnetic brake type) C L Detail View of Table Surface at C 1 Return to Home Operation Range Positioning Range Counter-Motor Side Home Position Motor Side Home Position Cables can be wired in this range. Motor Cable (Sold separately) 9 1 M.53 Deep Mounting Hole for Accessory Sensor Set.1 3H( ) Deep M Deep Cables can be wired in this range. Mounting Reference Surface AA BB Detail of Mounting Reference Surface A A.5 L (n1)1 nm5 Deep B B Number of Holes (n) [mm] 5, 1 15, 5, 3 35, 5, 5 55, 5, 7 n Linear Slide Model: EZSM3DC, EZSM3EC (Without Electromagnetic Brake) EZSM3DMC, EZSM3EMC (With Electromagnetic Brake) L1 L Mass [kg] Electromagnetic Brake Not Equipped/Equipped Not Equipped Equipped Not Equipped/Equipped Not Equipped Equipped Numbers Specifiable in the Box () within the Linear Slide Model Name Dimensions for Linear Slide Installation (Unit = mm) 9.5 (19.5 for the Electromagnetic Brake Type) Mounting 7. Reference Surface L (n1)1 L (Positioning Pin Hole) Cable Hole (Reference) 5 (7) () M5 n Table Position at Return to Home 1.5 The mounting reference surface can be set on either side. The above figure assumes that the linear slide is mounted on its top surface. Specifications, Dimensions of Controller P.3 / Connection and Operation P.3 AUDIN -, avenue de la malle Saint Brice Courcelles - Tel : Fax : Web : http: info@audin.fr 1

22 Adopting Motor, Rolled Ball Screw Specification EZS: 7 mm (W) 5 mm (H), VDC Maximum Transportable Mass: Horizontal 3 kg/vertical 1 kg : 5 to 7 mm (in 5 mm increments) Specifications of Linear Slide Drive Method Rolled Ball Screw Repetitive Positioning Accuracy [mm]. Resolution [mm].1 Traveling Parallelism [mm].3 Maximum Load Moment [Nm] MP: MY: MR: 7. Lead Transportable Mass [kg] Maximum Speed () [mm/s] Thrust Electromagnetic Brake Model [mm] Horizontal Vertical 555 mm mm 5 mm 7 mm [N] Holding Force [N] EZSD-K EZSDM-K 7 7 EZSE-K EZSEM-K 1 1 Enter the stroke length in the box () within the model name. This applies when the linear slide is installed from the base surface. Product Number Code EZS D 5 M - K Series EZS: Series Linear Slide Size : Width: 7 mm Height: 5 mm Lead D: 1 mm E: mm 5 (5 mm) 7 (7 mm) Electromagnetic Brake None: Without Electromagnetic Brake M: With Electromagnetic Brake Power Supply Input K: VDC Linear Slide/Controller Combinations Model names for linear slide and controller combinations are shown below. Electromagnetic Brake Model Linear Slide Model Controller Model EZSD-K EZSMDK Not equipped EZSE-K EZSMEK ESMC-K EZSDM-K EZSMDMK Equipped EZSEM-K EZSMEMK Enter the stroke length in the box () within the model name. Positioning Distance Positioning Time Check the (approximate) positioning time from the positioning distance. As a rough guideline, the positioning time by the linear slide corresponds to the positioning time calculated from the graph, multiplied by the positioning time coefficient corresponding to the applicable stroke. See page 11 for operation speed and acceleration. EZSD (Lead: 1 mm) Horizontal Installation kg EZSE (Lead: mm) Horizontal Installation kg 3 kg Vertical Installation kg 3.5 kg 7 kg Vertical Installation kg 7 kg 1 kg Positioning Time Coefficient [mm] Horizontal Installation Vertical Installation kg kg 3.5 kg 7 kg Positioning Time Coefficient [mm] Horizontal Installation Vertical Installation kg 3 kg kg 7 kg 1 kg Notes: The positioning time in the graph does not include the settling time. Use a settling time of.15 s as a reference. The starting speed should be mm/s or less. Features P. / Motor Specifications P.3 / System Configuration P.1 / Product Line P.1 AUDIN -, avenue de la malle Saint Brice Courcelles - Tel : Fax : Web : http: info@audin.fr

23 Dimensions of Linear Slide (Unit = mm) L , 9.5 Counterbore Deep Cables can be wired in this range L.5 (19.5 for the electromagnetic brake type) C M.53 Deep Mounting Hole for Accessory Sensor Set H( ) Deep M Deep Motor Cable (Sold separately) Detail View of Table Surface at C 1 Return to Home Operation Range Positioning Range Counter-Motor Side Home Position Motor Side Home Position Cables can be wired in this range. Mounting Reference Surface AA BB Detail of Mounting Reference Surface 31 A A L (n1) nm5 Deep 3.5 B B Number of Holes (n) [mm] 5, 1 15, 5, 3 35, 5, 5 55, 5, 7 n Linear Slide Model: EZSMDK, EZSMEK (Without Electromagnetic Brake) EZSMDMK, EZSMEMK (With Electromagnetic Brake) L1 L Mass [kg] Electromagnetic Brake Not Equipped/Equipped Not Equipped Equipped Not Equipped/Equipped Not Equipped Equipped Numbers Specifiable in the Box () within the Linear Slide Model Name Dimensions for Linear Slide Installation (Unit = mm) 9.5 (19.5 for the Electromagnetic Brake Type) Mounting 7. Reference Surface L (n1)1 L (Positioning Pin Hole) Cable Hole (Reference) 5 (7) () M5 n5.5.5 Table Position at Return to Home 11.5 The mounting reference surface can be set on either side. The above figure assumes that the linear slide is mounted on its top surface. Specifications, Dimensions of Controller P.3 / Connection and Operation P.3 AUDIN -, avenue de la malle Saint Brice Courcelles - Tel : Fax : Web : http: info@audin.fr 3

24 Adopting Motor, Rolled Ball Screw Specification EZS: 7 mm (W) 5 mm (H), Single-Phase -3 VAC Maximum Transportable Mass: Horizontal 3 kg/vertical 1 kg : 5 to 7 mm (in 5 mm increments) Specifications of Linear Slide Drive Method Rolled Ball Screw Repetitive Positioning Accuracy [mm]. Resolution [mm].1 Traveling Parallelism [mm].3 Maximum Load Moment [Nm] MP: MY: MR: 7. Lead Transportable Mass [kg] Maximum Speed () [mm/s] Thrust Electromagnetic Brake Model [mm] Horizontal Vertical 55 mm 55 mm mm 5 mm 7 mm [N] Holding Force [N] EZSD-C EZSDM-C 7 7 EZSE-C EZSEM-C 1 1 Enter the stroke length in the box () within the model name. For the single-phase VAC models, please contact the nearest Oriental Motor sales office. This applies when the linear slide is installed from the base surface. Product Number Code EZS D 5 M - C Series EZS: Series Linear Slide Size : Width: 7 mm Height: 5 mm Lead D: 1 mm E: mm 5 (5 mm) 7 (7 mm) Electromagnetic Brake None: Without Electromagnetic Brake M: With Electromagnetic Brake Power Supply Input C: Single-Phase -3 VAC Linear Slide/Controller Combinations Model names for linear slide and controller combinations are shown below. Electromagnetic Brake Model Linear Slide Model Controller Model EZSD-C EZSMDC Not equipped EZSE-C EZSMEC ESMC-C EZSDM-C EZSMDMC Equipped EZSEM-C EZSMEMC Enter the stroke length in the box () within the model name. Positioning Distance Positioning Time Check the (approximate) positioning time from the positioning distance. As a rough guideline, the positioning time by the linear slide corresponds to the positioning time calculated from the graph, multiplied by the positioning time coefficient corresponding to the applicable stroke. See page 1 for operation speed and acceleration. EZSD (Lead: 1 mm) Horizontal Installation kg EZSE (Lead: mm) Horizontal Installation kg 3 kg Vertical Installation kg 3.5 kg 7 kg Vertical Installation kg 7 kg 1 kg Positioning Time Coefficient [mm] Horizontal Installation Vertical Installation kg kg 3.5 kg 7 kg Positioning Time Coefficient [mm] Horizontal Installation Vertical Installation kg 3 kg kg 7 kg 1 kg Notes: The positioning time in the graph does not include the settling time. Use a settling time of.15 s as a reference. The starting speed should be mm/s or less. Features P. / Motor Specifications P.3 / System Configuration P.1 / Product Line P.1 AUDIN -, avenue de la malle Saint Brice Courcelles - Tel : Fax : Web : http: info@audin.fr

25 Dimensions of Linear Slide (Unit = mm) L , 9.5 Counterbore Deep Cables can be wired in this range. Motor Cable (Sold separately) 9 M.53 Deep.1 C Mounting Hole for 3H( ).5 Deep Accessory Sensor Set 7.5 M Deep L.5 (19.5 for the electromagnetic brake type) 5 Detail View of Table Surface at C 1 Return to Home Operation Range Positioning Range Counter-Motor Side Home Position Motor Side Home Position Cables can be wired in this range. Mounting Reference Surface AA BB Detail of Mounting Reference Surface 31 A A L (n1) nm5 Deep 3.5 B B Number of Holes (n) [mm] 5, 1 15, 5, 3 35, 5, 5 55, 5, 7 n Linear Slide Model: EZSMDC, EZSMEC (Without Electromagnetic Brake) EZSMDMC, EZSMEMC (With Electromagnetic Brake) L1 L Mass [kg] Electromagnetic Brake Not Equipped/Equipped Not Equipped Equipped Not Equipped/Equipped Not Equipped Equipped Numbers Specifiable in the Box () within the Linear Slide Model Name Dimensions for Linear Slide Installation (Unit = mm) 9.5 (19.5 for the Electromagnetic Brake Type) Mounting 7. Reference Surface L (n1)1 L (Positioning Pin Hole) Cable Hole (Reference) 5 (7) () M5 n5.5.5 Table Position at Return to Home 11.5 The mounting reference surface can be set on either side. The above figure assumes that the linear slide is mounted on its top surface. Specifications, Dimensions of Controller P.3 / Connection and Operation P.3 AUDIN -, avenue de la malle Saint Brice Courcelles - Tel : Fax : Web : http: info@audin.fr 5

26 Adopting Motor, Rolled Ball Screw Specification EZS: 7 mm (W).5 mm (H), VDC Maximum Transportable Mass: Horizontal kg/vertical 3 kg : 5 to 5 mm (in 5 mm increments) Specifications of Linear Slide Drive Method Rolled Ball Screw Repetitive Positioning Accuracy [mm]. Resolution [mm].1 Traveling Parallelism [mm].3 Maximum Load Moment [Nm] MP: 5.7 MY: 37.5 MR: 55. Lead Transportable Mass [kg] Maximum Speed () [mm/s] Thrust Electromagnetic Brake Model [mm] Horizontal Vertical 55 mm 7 mm 75 mm mm 5 mm [N] Holding Force [N] EZSD-K EZSDM-K 15 1 EZSE-K EZSEM-K 3 39 Enter the stroke length in the box () within the model name. This applies when the linear slide is installed from the base surface. Product Number Code EZS D 5 M - K Series EZS: Series Linear Slide Size : Width: 7 mm Height:.5 mm Lead D: 1 mm E: mm 5 (5 mm) 5 (5 mm) Electromagnetic Brake None: Without Electromagnetic Brake M: With Electromagnetic Brake Power Supply Input K: VDC Linear Slide/Controller Combinations Model names for linear slide and controller combinations are shown below. Electromagnetic Brake Model Linear Slide Model Controller Model EZSD-K EZSMDK Not equipped EZSE-K EZSMEK ESMC-K EZSDM-K EZSMDMK Equipped EZSEM-K EZSMEMK Enter the stroke length in the box () within the model name. Positioning Distance Positioning Time Check the (approximate) positioning time from the positioning distance. As a rough guideline, the positioning time by the linear slide corresponds to the positioning time calculated from the graph, multiplied by the positioning time coefficient corresponding to the applicable stroke. See page 1 for operation speed and acceleration. EZSD (Lead: 1 mm) Horizontal Installation kg 3 kg Vertical Installation kg Positioning Time Coefficient [mm] Horizontal Installation Vertical Installation kg 3 kg kg EZSE (Lead: mm) Horizontal Installation kg 3 kg kg Vertical Installation kg 3 kg Notes: The positioning time in the graph does not include the settling time. Use a settling time of.15 s as a reference. The starting speed should be mm/s or less. Positioning Time Coefficient [mm] Horizontal Installation Vertical Installation kg 3 kg kg kg 3 kg Features P. / Motor Specifications P.3 / System Configuration P.1 / Product Line P.1 AUDIN -, avenue de la malle Saint Brice Courcelles - Tel : Fax : Web : http: info@audin.fr

27 Dimensions of Linear Slide (Unit = mm) M.53 Deep Mounting Hole for Accessory Sensor Set L , 9.5 Counterbore Deep Cables can be wired in this range (139.5 for the electromagnetic brake type) 3 5 Motor Side Home Position L C Return to Home Operation Range 13.5 Positioning Range Counter-Motor Side Home Position H( ) Deep 75 M5 Deep Detail View of Table Surface at C 1 Motor Cable (Sold separately) Cables can be wired in this range. Mounting Reference Surface AA BB Detail of Mounting Reference Surface 31 1 Number of Holes (n) 7 A A L (n1)1 1 nm5 Deep B B 31 [mm] 5, 1 15, 5, 3 35, 5, 5 55, 5, 7 75, 5 n Linear Slide Model: EZSMDK, EZSMEK (Without Electromagnetic Brake) EZSMDMK, EZSMEMK (With Electromagnetic Brake) Electromagnetic Numbers Specifiable in the Box () within the Linear Slide Model Name Brake L1 L Mass [kg] Not Equipped/Equipped Not Equipped Equipped Not Equipped/Equipped Not Equipped Equipped Dimensions for Linear Slide Installation (Unit = mm) 99 (139.5 for the Electromagnetic Brake Type) Mounting 7. Reference Surface L (n1)1 L (Positioning Pin Hole) Cable Hole (Reference) 7 (1) () M5 n5.5.5 Table Position at Return to Home 17.5 The mounting reference surface can be set on either side. The above figure assumes that the linear slide is mounted on its top surface. Specifications, Dimensions of Controller P.3 / Connection and Operation P.3 AUDIN -, avenue de la malle Saint Brice Courcelles - Tel : Fax : Web : http: info@audin.fr 7

28 Adopting Motor, Rolled Ball Screw Specification EZS: 7 mm (W).5 mm (H), Single-Phase -3 VAC Maximum Transportable Mass: Horizontal kg/vertical 3 kg : 5 to 5 mm (in 5 mm increments) Specifications of Linear Slide Drive Method Rolled Ball Screw Repetitive Positioning Accuracy [mm]. Resolution [mm].1 Traveling Parallelism [mm].3 Maximum Load Moment [Nm] MP: 5.7 MY: 37.5 MR: 55. Lead Transportable Mass [kg] Maximum Speed () [mm/s] Thrust Electromagnetic Brake Model [mm] Horizontal Vertical 555 mm mm 5 mm 7 mm 75 mm mm 5 mm [N] Holding Force [N] EZSD-C EZSDM-C 15 1 EZSE-C EZSEM-C 3 39 Enter the stroke length in the box () within the model name. For the single-phase VAC models, please contact the nearest Oriental Motor sales office. This applies when the linear slide is installed from the base surface. Product Number Code EZS D 5 M - C Series EZS: Series Linear Slide Size : Width: 7 mm Height:.5 mm Lead D: 1 mm E: mm 5 (5 mm) 5 (5 mm) Electromagnetic Brake None: Without Electromagnetic Brake M: With Electromagnetic Brake Power Supply Input C: Single-Phase -3 VAC Linear Slide/Controller Combinations Model names for linear slide and controller combinations are shown below. Electromagnetic Brake Model Linear Slide Model Controller Model EZSD-C EZSMDC Not equipped EZSE-C EZSMEC ESMC-C EZSDM-C EZSMDMC Equipped EZSEM-C EZSMEMC Enter the stroke length in the box () within the model name. Positioning Distance Positioning Time Check the (approximate) positioning time from the positioning distance. As a rough guideline, the positioning time by the linear slide corresponds to the positioning time calculated from the graph, multiplied by the positioning time coefficient corresponding to the applicable stroke. See page 13 for operation speed and acceleration. EZSD (Lead: 1 mm) Horizontal Installation kg 3 kg Vertical Installation kg Positioning Time Coefficient [mm] Horizontal Installation Vertical Installation kg 3 kg kg EZSE (Lead: mm) Horizontal Installation kg 3 kg kg Vertical Installation kg 3 kg Notes: The positioning time in the graph does not include the settling time. Use a settling time of.15 s as a reference. The starting speed should be mm/s or less. Positioning Time Coefficient [mm] Horizontal Installation Vertical Installation kg 3 kg kg kg 3 kg Features P. / Motor Specifications P.3 / System Configuration P.1 / Product Line P.1 AUDIN -, avenue de la malle Saint Brice Courcelles - Tel : Fax : Web : http: info@audin.fr

29 Dimensions of Linear Slide (Unit = mm) M.53 Deep Mounting Hole for Accessory Sensor Set L , 9.5 Counterbore Deep Cables can be wired in this range (139.5 for the electromagnetic brake type) 3 5 Motor Side Home Position L C Return to Home Operation Range 13.5 Positioning Range Counter-Motor Side Home Position H( ) Deep 75 M5 Deep Detail View of Table Surface at C 1 Motor Cable (Sold separately) Cables can be wired in this range. Mounting Reference Surface AA BB Detail of Mounting Reference Surface 31 1 Number of Holes (n) 7 A A L (n1)1 1 nm5 Deep B B 31 [mm] 5, 1 15, 5, 3 35, 5, 5 55, 5, 7 75, 5 n Linear Slide Model: EZSMDC, EZSMEC (Without Electromagnetic Brake) EZSMDMC, EZSMEMC (With Electromagnetic Brake) Electromagnetic Numbers Specifiable in the Box () within the Linear Slide Model Name Brake L1 L Mass [kg] Not Equipped/Equipped Not Equipped Equipped Not Equipped/Equipped Not Equipped Equipped Dimensions for Linear Slide Installation (Unit = mm) 99 (139.5 for the Electromagnetic Brake Type) Mounting 7. Reference Surface L (n1)1 L (Positioning Pin Hole) Cable Hole (Reference) 7 (1) () M5 n5.5.5 Table Position at Return to Home 17.5 The mounting reference surface can be set on either side. The above figure assumes that the linear slide is mounted on its top surface. Specifications, Dimensions of Controller P.3 / Connection and Operation P.3 AUDIN -, avenue de la malle Saint Brice Courcelles - Tel : Fax : Web : http: info@audin.fr 9

30 Specifications of Controller Controller Mode Controller Model Item ESMC-K ESMC-C Type Stored-data type VDC5% 1. A Control Power [Controller only:.5 A (Take into account safety margin of. A for the teaching pendant, and/or.3 A for the electromagnetic brake type.) ] Power Supply Voltage VDC1% Single-Phase -3 VAC 151% Input Main Power Frequency 5/ Hz Current. A 1 3. A 1 Setting Mode Absolute mode (absolute-position specification), Incremental mode (relative-position specification) Positioning Number 3 Data Setting Method Data is set using the teaching pendant (EZT1) or data editing software (EZED) (Stored in EEPROM) Mode Selective positioning Sequential positioning Travel Amount Setting Range mm (value set in units of.1 mm) Positioning Starting Speed.1. mm/s (value set in units of.1 mm/s) Control Operating Speed.1. mm/s (value set in units of.1 mm/s) Acceleration/Deceleration.1. m/s (value set in units of.1 m/s ) External input mode (EXT): In this mode, operation by external signal, command position, I/O condition and alarm condition can be monitored. Control Mode Program mode (PRG): In this mode, operation data can be created, changed or cleared. Parameter mode (PAR): In this mode, operation parameters and function setting parameters can be set or changed. Test mode (TST): In this mode, manual operation and I/O check can be performed. Operation Mode Positioning operation, Return to home operation, Linked operation (a maximum of data), Continuous operation Input Signal/Input Mode START, STOP, HOME/PRESET, FREE, MM5, REQ, ACL/CK VDC Photocoupler input, Input resistance.7 k FWD, RVS 5 VDC Photocoupler input, Input resistance 1 or VDC Photocoupler input, Input resistance.7 k LS, LS, HOMELS VDC Photocoupler input, Input resistance.7 k ALM, END/OUTR, MOVE, AREA/OUT, OUT1 Photocoupler, Open-collector output ( VDC, 1 ma or less) Output Signal/Output Mode ASG1, BSG1 Photocoupler, Open-collector output ( VDC, 15 ma or less) ASG, BSG Line driver output Excessive position deviation, Overcurrent protection, Overvoltage protection, Overheat protection, Overload, Protective Function Sensor error, Overspeed, Nonvolatile memory error, etc. Indicator (LED) PWR, ALM PWR, ALM, CHARGE Cooling Method Natural ventilation Mass. kg.77 kg Driver Mode Power Supply Input Item Control Power Main Power Maximum Response Frequency Operation Mode Input Signal/Input Mode Controller Model ESMC-K ESMC-C VDC5% 1. A [Controller only:.5 A (Take into account safety margin of. A for the teaching pendant, and/or.3 A for the electromagnetic brake type.) ] Voltage VDC1% Single-Phase -3 VAC 151% Frequency 5/ Hz Current. A 1 3. A 1 1-pulse input mode, -pulse input mode: khz, Phase difference input mode: khz Return to home operation, Pulse input operation (1-pulse input mode, -pulse input mode, Phase difference input mode) ACL/CK, FREE, C.OFF, HOME/PRESET, REQ VDC Photocoupler input, Input resistance.7 k FP, RP 5 VDC Photocoupler input, Input resistance 1 or VDC Photocoupler input, Input resistance.7 k LS, LS, HOMELS VDC Photocoupler input, Input resistance.7 k MOVE, END/OUTR, ALM, TIM/OUT, OUT Photocoupler, Open-collector output ( VDC, 1 ma or less) Output Signal/Output Mode ASG1, BSG1 Photocoupler, Open-collector output ( VDC, 15 ma or less) ASG, BSG Line driver output Protective Function Excessive position deviation, Overcurrent protection, Overvoltage protection, Overheat protection, Overload, Sensor error, Overspeed, Nonvolatile memory error, etc. Indicator (LED) PWR, ALM PWR, ALM, CHARGE Cooling Method Natural ventilation Mass. kg.77 kg 1 The maximum current varies depending on the connected linear slide. [ESMC-K] EZSM3/EZSM: 1.7 A EZSM:. A [ESMC-C] EZSM3/EZSM:.1 A EZSM: 3. A Values vary depending on the connected linear slide. Check the specifications of each series. 3AUDIN -, avenue de la malle Saint Brice Courcelles - Tel : Fax : Web : http: info@audin.fr

31 General Specifications of Controller This is the value after rated operation under normal ambient temperature and humidity. VDC Item Specification Insulation Resistance Dielectric Strength 1 M or more when 5 VDC megger is applied between the following places: FG Main power supply terminal FG I/O connector Sufficient to withstand the following for 1 minute: FG Main power supply terminal.5 kvac 5 Hz FG I/O connector.5 kvac 5 Hz Ambient C (non-freezing) Temperature Ambient Humidity 5% or less (non-condensing) Note: Do not measure insulation resistance or perform the dielectric strength test while the linear slide and controller are connected. Single-Phase -3 VAC Item Insulation Resistance Dielectric Strength Ambient Temperature Ambient Humidity Specification 1 M or more when 5 VDC megger is applied between the following places: I/O connector Main power supply terminal, Motor connector, Battery connector Control power supply Main power supply terminal, Motor connector, Battery connector PE Main power supply terminal, Motor connector, Battery connector Sufficient to withstand the following terminals for 1 minute: Signal I/O, Control power supply Main power supply 1. kv Signal I/O, Control power supply Motor output 1. kv Signal I/O, Control power supply Battery input 1. kv PE Main power supply 1.5 kv PE Motor output 1.5 kv PE Battery input 1.5 kv C (non-freezing) 5% or less (non-condensing) Controller Dimensions (Unit = mm) VDC Controller Model: ESMC-K Mass:. kg DIN Rail Center M Slit 1 39 max M (13) (17) 1 Mounting Bracket (Included) ( pieces) Countersink 5 3 I/O Connector (Included) Case: (MOLEX) Connector: (MOLEX) I/O Connector for Sensor (Included) Case: (MOLEX) Connector: (MOLEX) 1 The center of the DIN rail when a DIN rail mounting plate (PADP1, sold separately) is used for installation. Single-Phase -3 VAC Controller Model: ESMC-C Mass:.77 kg DIN Rail Center max max (17) 1 Mounting Bracket (Included) ( pieces) Countersink 5 3 I/O Connector (Included) Case: (MOLEX) Connector: (MOLEX) I/O Connector for Sensor (Included) Case: (MOLEX) Connector: (MOLEX) M3 3 M M3 (13) 1 Slit The center of the DIN rail when a DIN rail mounting plate (PADP1, sold separately) is used for installation. AUDIN -, avenue de la malle Saint Brice Courcelles - Tel : Fax : Web : http: info@audin.fr 31

32 Connection and Operation Names and Functions of Controller Parts ESMC-K ESMC-C Controller Key 1 Pendant Connector Control Power Supply Terminals Emergency Stop Output Terminal Motor Connector 3 Battery Connector Controller Key 1 Pendant Connector Control Power Supply Terminals Emergency Stop Output Terminal 3 Battery Connector Main Power Supply Terminal 5 Motor Connector CHARGE LED Main Power Supply Terminal 5 Protective Earth Terminal (PE) 1 Pendant Switch Indication PENDANT Function Enable/disable the teaching pendant. ON: Enable the teaching pendant OFF: Disable the teaching pendant (The emergency stop button on the teaching pendant is also disabled.) Make sure the linear slide model name on the controller key matches the model name of the connected linear slide. If the names do not match, the linear slide cannot be operated as specified. Mode Switch Indication Function Invalid (not used) Switch ABS/INC 3 ON: Absolute type OFF: Incremental type Set pulse input mode (in driver mode) ON: 1-pulse input mode OFF: -pulse input mode Switch modes 1 ON: Driver mode OFF: Controller mode 3 LED Indicator Indication Color Name PWR Green Control power supply indicator ALM Red Alarm indicator Sensor I/O Connector Indication Input Pin No. Terminal Name Function 1 11 IN-COM Power supply for sensor SENSOR Input LS coordinate limit sensor 1 LS coordinate limit sensor 15 HOMELS Mechanical home sensor 3AUDIN -, avenue de la malle Saint Brice Courcelles - Tel : Fax : Web : http: info@audin.fr

33 5 I/O Connector Controller Mode Indication I/O Pin No. Terminal Name Function 1 INCOM1 Power supply for input signals Input 19 GND Power supply for I/O signals 1 OUTCOM Power supply for output signals I/O Output Input ALM 3 MOVE 5 END/ OUTR AREA/ OUT T-UP/ OUT1 This signal is output when a protective function has been activated. This signal is output while the linear slide is operating. END: This signal is output when a positioning operation or return to home operation has been completed. OUTR: Output the current position AREA: This output notifies that the moving part of the linear slide is staying inside a specified area. OUT: Output the current position T-UP: This signal is output when a pushmotion operation has been completed. OUT1: Output the current position ASG1 A-phase pulse output (Open-collector) 1 BSG1 B-phase pulse output (Open-collector) ASG 3 ASG A-phase pulse output (Line driver) BSG 5 BSG B-phase pulse output (Line driver) 7 START Start the positioning operation ACL: Cancel the protective function currently ACL/CK active CK: Output the current position 9 FREE Stop motor excitation and release the electromagnetic brake 1 STOP Stop a positioning operation, return to home operation and continuous operation 11 M 1 M1 13 M 1 M3 Select the positioning operation No. 15 M 1 M5 17 HOME/ PRESET HOME: Start return to home operation PRESET: Preset the current position 3 REQ Request the current position output 31 FWD FWD: Move the linear slide table in the coordinate direction 3 FWD 33 PFWD 3 RVS 35 RVS 3 PRVS RVS: Move the linear slide table in the coordinate direction Driver Mode Indication I/O Pin No. Terminal Name Function 1 INCOM1 Power supply for input signals Input 19 GND Power supply for I/O signals 1 OUTCOM Power supply for output signals ALM This signal is output when a protective function has been activated. 3 MOVE This signal is output while the linear slide is operating. I/O Output 5 END/ OUTR TIM/ OUT END: This signal is output when a positioning operation or return to home operation has been completed. OUTR: Output the current position This signal is output when the excitation sequence is at step "." OUT: Output the current position OUT1 OUT1: Output the current position ASG1 A-phase pulse output (Open-collector) 1 BSG1 B-phase pulse output (Open-collector) ASG 3 ASG A-phase pulse output (Line driver) BSG 5 BSG B-phase pulse output (Line driver) ACL: Cancel the protective function currently ACL/CK active CK: Output the current position 9 FREE Stop motor excitation and release the electromagnetic brake 1 C.OFF Cut off the output current to the motor 17 HOME/ PRESET HOME: Start return to home operation PRESET: Preset the current position Input 3 REQ Request the current position output 31 FP FP: Operation command pulse input (The 3 FP operation command pulse input in the coordinate direction in the -pulse 33 PFP input mode) 3 RP RP: Direction of movement input (The 35 RP operation command pulse input in the coordinate direction in the -pulse 3 PRP input mode) Teaching pendant (EZT1) or data editing software (EZED) is required when switching the HOME/PRESET input of the driver mode or changing parameters. AUDIN -, avenue de la malle Saint Brice Courcelles - Tel : Fax : Web : http: info@audin.fr 33

34 Connection Diagram Teaching Pendant (Sold separately) Data Editing Software (Sold separately) (With PC Interface Cable) C.KEY Controller PC Interface Cable or Cable of Teaching Pendant PENDANT/PC VDC Power Source Emergency Stop Circuit Motorized Linear Slide Motor Cable V DC EMG MOTOR BAT SENSOR Sensor Extension Cable or Connector-Terminal Block Conversion Unit Sensor (Sold separately) VDC Power Source VDC Power Source ESMC-K Surge Suppressor AC Line Filter AC L V DC -3V N ESMC-C I/O I/O Cable or Connector-Terminal Block Conversion Unit <When sensor is used> A connection is needed. See wiring the sensor of controller mode for the sensor and sensor cable connections. Host Controller Programmable Controller, etc. ( ) For the circuit configuration, refer to "Emergency stop circuit" below. Emergency Stop Circuit If an emergency stop function is used, provide a circuit that will cut off the main power supply and logic power supply upon pressing of the emergency stop button. When providing an emergency stop circuit, examine an appropriate circuit configuration based on the result of risk assessment of the equipment you are manufacturing. If the risk assessment result indicates that no emergency stop function is necessary, the circuit configuration shown in "Connection example when an emergency stop function is not used" can be used. Do not connect the emergency stop output terminal directly to GND ( V). Doing so will blow the overcurrent protection fuse in the teaching pendant, in this case the emergency stop can no longer be canceled. Provide a measure on the machine side so that the machine will operate safely when the motorized actuator is stopped. Refer to the operating manual for details. Connection Example When an Emergency Stop Function is Used A connection example of controller power system and emergency stop system is given below, which conforms to Category 1 under the EN 95-1 safety standard and Stop Category under the EN -1 safety standard. O V Controller Teaching Pendant (Sold separately) Emergency Stop Button SB3 PENDANT/PC Pendant Switch Overcurrent Protection Fuse 5 AC ESMC-C Relay KA1 VDC VDC O V ESMC-K Emergency Stop Release Button SB1 KA1, SB: Use an EN-certified product. KA1: Rating VDC, 3 ma The Pendant switch is ON in this figure. Emergency Stop Button SB O V FU1 Power Source Two types of power source, main power and control power are required. Both power sources must at least have the specified capacity. Specifications of controller Page 3 If the power capacity is insufficient, motor output may drop, which may cause the linear slide to malfunction (due to lack of thrust force). FU FU1 FU EMG Emergency Stop Output Terminal L N Main Power Supply Terminal Main Power Supply Terminal Connection Example When an Emergency Stop Function is Not Used Teaching Pendant (Sold separately) Controller Emergency Stop Button SB3 PENDANT/PC Pendant Switch Overcurrent Protection Fuse 5 AC ESMC-C VDC V ESMC-K N.C. (No Connection) EMG VDC V FU1 FU FU1 FU Emergency Stop Output Terminal Control Power Supply Terminal Main Power Supply Terminal Main Power Supply Terminal When the emergency stop button (SB3) on the teaching pendant is pressed, an emergency stop alarm (Err) will generate and the motorized actuator will stop operating. This stopping method is based on software control. It does not meet the emergency stop requirements specified in safety standards. Notes on Wiring Wire the control I/O signal lines over as short a distance as possible, using a shield cable [AWG (. mm ) or thicker]. Be sure to use an accessory motor cable to wire the linear slide and controller. Wire the control I/O signal lines by providing a minimum distance of 3 cm from the power lines (large-current circuits such as the power supply line and motor line). Do not wire the control I/O signal lines with the power lines in the same duct or bundle them together. L N 3AUDIN -, avenue de la malle Saint Brice Courcelles - Tel : Fax : Web : http: info@audin.fr

35 Controller Mode Driver mode operating return to home operation with the linear motion controller Host Controller Controller VDC I/O Connector M M kω.7 kω 1 kω 1 kω START 7.7 kω 1 kω ACL/CK.7 kω 1 kω FREE 9.7 kω 1 kω STOP 1.7 kω 1 kω HOME/PRESET 17.7 kω 1 kω REQ 3.7 kω 1 kω P-FWD P-RVS FWD- RVS kω.7 kω VDC V ma or less OUT-COM R 1 ma or less ALM IN-COM1 1 1 R 1 ma or less MOVE 3 R 1 ma or less END/OUTR R 1 ma or less AREA/OUT 5 R 1 ma or less T-UP/OUT1 5 V GND 1 19 V ASG V ASG 3 BSG Sensor set PAES-SY Pink Brown Black Blue Pink Brown Black Blue Pink Brown Black Blue V BSG 5 VDC 15 ma or less LS 13 LS 1 HOMELS 15 IN-COM 1,11,19 Sensor Connector.7 kω 1 kω.7 kω 1 kω.7 kω 1 kω FWD (FP) and RVS (RP) Signals When connecting to 5 VDC When connecting to a line driver output circuit Host controller Controller Host controller Controller 5 VDC 33, 3 31, 3.7 kω 1 Ω 33, 3 31, 3.7 kω 1 Ω 3, 35 7 ma 3, 35 7 ma V AUDIN -, avenue de la malle Saint Brice Courcelles - Tel : Fax : Web : http: info@audin.fr 35

36 Driver Mode Host Controller VDC Controller I/O Connector ACL/CK FREE C.OFF HOME/PRESET REQ kω.7 kω.7 kω.7 kω.7 kω 1 kω 1 kω 1 kω 1 kω 1 kω P-FP P-RP FP- RP kω.7 kω VDC V IN-COM1 ma or less OUT-COM 1 1 R 1 ma or less ALM R 1 ma or less MOVE 3 R 1 ma or less END/OUTR R 1 ma or less TIM/OUT 5 R 1 ma or less T-UP/OUT1 5 V GND 1 19 V V ASG ASG 3 BSG BSG 5 FWD (FP) and RVS (RP) Signals When connecting to 5 VDC When connecting to a line driver output circuit Host controller Controller Host controller Controller 5 VDC 33, 3 31, 3.7 kω 1 Ω 33, 3 31, 3.7 kω 1 Ω 3, 35 7 ma 3, 35 7 ma V 3AUDIN -, avenue de la malle Saint Brice Courcelles - Tel : Fax : Web : http: info@audin.fr

37 Motorized Linear Slides Accessories (Sold separately) Motor Cables A set of dedicated cables is used to connect the linear slide of the Series with the controller. Use flexible cables in applications where the cables will flex repeatedly. (For both the electromagnetic brake type and non-electromagnetic brake type.) Product Line Standard Cables (Without Electromagnetic Brake/ With Electromagnetic Brake) Model Length (L) CC1ES- 1 m CCES- m CC3ES- 3 m CC5ES- 5 m CC7ES- 7 m CC1ES- 1 m CC15ES- 15 m CCES- m Keep the cable length to 1 m or below for VDC linear slides. Flexible Cables (Without Electromagnetic Brake/ With Electromagnetic Brake) Model Length (L) CC1ESR- 1 m CCESR- m CC3ESR- 3 m CC5ESR- 5 m CC7ESR- 7 m CC1ESR- 1 m CC15ESR- 15 m CCESR- m Keep the cable length to 1 m or below for VDC linear slides. Dimensions (Unit = mm) CCES-/CCESR- 9.5 Motor Side. 9 Controller Side. Sensor Set The sensor set, dedicated to the Series, consists of three sets of a sensor, a sensor mounting bracket and a flexible sensor cable with connector ( m), and one shield plate. The screws needed for installation are also included. Product Line Model PAES-SY Sensor Mounting Bracket: 3 pieces Shield Plate: 1 piece.5. Specifications Item Power Supply Current Consumption Control Output Indicator Lamp Sensor Logic L Model: EE-SX7R (OMRON) 5 to VDC 1%, ripple (PP) 1% or less 3 ma or less PNP open-collector output, 5 to VDC, 5 ma or less Residual voltage 1.3 V or less (at load current of 5 ma) Detection display (red) Normal open/normal close (switchable, depending on connection) Flexible Sensor Cable with Connector m: 3 pieces Conductor: AWG (. mm ) Sensor: 3 pieces [EE-SX7R (OMRON)] Dimensions of Recommended Sensor Installation Positions (Unit = mm) LS sensor detection position HOME sensor detection position (when the LS sensor is used) (when the HOME sensor is used) LS sensor detection position (when the LS sensor is used) 1 1 Table Limit Position L L3 (When HOME sensor is used) L5 L L7 L9 L1 L11 LS Sensor L1 1 L HOME Sensor LS Sensor L Linear Slide Size L1 L L3 L L5 L L7 L L9 L1 L11 EZS EZS EZS Note: If the stroke is mm or below, all three sensors cannot be installed. AUDIN -, avenue de la malle Saint Brice Courcelles - Tel : Fax : Web : http: info@audin.fr 37

38 Sensor Extension Cables These cables are used for connection between the controller and the sensors. Product Line Model CCD1-1 CCD-1 Length (L) 1 m m Dimensions (Unit = mm) CCD-1 Conductor: AWG (.mm ) Shield Controller Side L 31 Laminate 13. Sensor Side Connector Terminal Block Conversion Unit A conversion unit that connects a driver to a host controller using a terminal block. With a signal name plate for easy, one-glance identification of driver signal names DIN-rail mountable Cable length: 1 m CCT1 CC3T1 Product Line Model CCT1 CC3T1 Length 1 m 1 m Dimensions (Unit = mm) CCT1 5.5 Mounting Holes Countersink 3.5 Deep 1 CC3T Mounting Holes Countersink 3.5 Deep DIN Rail Terminal Block Pin No Terminal Block Pin No DIN Rail Recommended Crimp Terminals Terminal screw size: M3 Tightening torque: 1. Nm Applicable minimum lead wire: AWG (.3 mm ) Round terminals are not available.. mm max. 3. mm min. 5. mm min.. mm max. 3AUDIN -, avenue de la malle Saint Brice Courcelles - Tel : Fax : Web : http: info@audin.fr

39 Teaching Pendant This product does not conform to RoHS Directive. The teaching pendant allows you to set and operate various data on hand, as well as to monitor the set data, current position and I/O status in real time. Product Line Model EZT1 Dimensions (Unit = mm) (5) 9 (1.5) Specifications Display Cable Length Mass Ambient Temperature LCD with -colored back light 5 m.37 kg C (non-freezing) Cable of Teaching Pendant.7, 5 m Length Data Editing Software With this software you can set and edit various data on a PC. It comes with a PC interface cable for connecting the controller and PC. The software also provides various monitoring functions. Product Line Model EZED Ver 1.11 or later PC Interface Cable Cable Length PC Connector Type Communication Port 5 m D-sub 9-Pin One RS-3C communication port Specifications (Operating Environment) Item Operating Software Memory Model: EZED Microsoft Windows Professional, Service Pack or later (hereinafter referred to as "Windows ") Microsoft Windows XP Home Edition, Service Pack or later (hereinafter referred to as "Windows XP") Microsoft Windows XP Professional Edition, Service Pack or later (hereinafter referred to as "Windows XP") Microsoft Windows XP Media Center Edition Service Pack or later (hereinafter referred to as "Windows XP") Microsoft Windows XP Media Center Edition 5 Service Pack or later (hereinafter referred to as "Windows XP") Microsoft Windows 9, Service Pack 1 or later (hereinafter referred to as "Windows 9") Microsoft Windows 9 Second Edition (hereinafter referred to as "Windows 9") Microsoft Windows Millennium Edition (hereinafter referred to as "Windows Me") Windows : 1 MB or more (19 MB or more is recommended.) Windows XP Home Edition or Professional Edition: 5 MB or more Windows XP Media Center Edition or 5: 3 MB or more Windows 9: MB or more (1 MB or more is recommended.) Windows 9 Second Edition: MB or more (1 MB or more is recommended.) Windows Me: 9 MB or more (1 MB or more is recommended.) Computer Pentium 5 MHz or more (The OS must be supported.) Display Resolution XGA (17) or higher resolution video adapter and monitor Free Hard Disk Space Free disk space of MB or more Serial Port RS-3C port, 1 channel Disk Device CD-ROM drive Microsoft Internet Explorer 5.1 or later is also required. Service Pack signifies a service pack provided by Microsoft Corporation. Microsoft and Windows are registered trademarks of Microsoft Corporation in the United States and other countries. Pentium is a trademark or registered trademark of Intel Corporation or its subsidiaries in the United States and other countries. Data editing software operation under English OS environment has been verified. Teaching Pendant (EZT1)/Data Editing Software (EZED) Function Comparison Table Item Function Teaching Pendant Data Editing Software (Model: EZT1) (Model: EZED) Cable Length 5 m 5 m 1 Display LCD 17 characters lines PC screen Emergency Stop Switch Operation Data Setting Parameter Setting Teaching Function (Direct/Remote) Operation Data Monitoring I/O Monitoring Waveform Monitoring Test Operation Data Copy Printing Function 1 PC interface cable (included) is used. The printing function is not available on computers running Windows 9/Me. AUDIN -, avenue de la malle Saint Brice Courcelles - Tel : Fax : Web : http: info@audin.fr 39

40 Cable Holders This cable holder protects and guides cables in dual or three-axis configurations. It can be easily installed on a dual axes mounting bracket using the supplied brackets. Applicable Cable Holder Length (L) [mm] Model [mm] PACH PACH PACH PACH PACH PACH PACH PACH PACH5-5 PACH PACH PACH PACH5-7 1 PACH PACH PACH PACH5-3 Dimensions (Unit = mm) 5 5 A -- A' 5 35 R5 L A A' Model L (mm) PACH PACH5-13 PACH5-1 5 PACH PACH PACH5-1 PACH5-7 PACH PACH5-79 PACH5- PACH5-5 9 PACH PACH5-1 PACH5-9 1 PACH PACH PACH AUDIN -, avenue de la malle Saint Brice Courcelles - Tel : Fax : Web : http: info@audin.fr

41 I/O Cables These cables are used for connection between the controller and the host controller. A half-pitch connector allowing one-touch connection to the controller is attached at one end of the flat cable. Product Line Model CC3D1-1 CC3D-1 Length (L) 1 m m Dimensions (Unit = mm) Conductor: AWG (.mm ) 15 Shield Linear Motion Controller Side L Laminate Host Controller Side DIN Rail Mounting Plate This mounting plate is convenient for installing the controller of the on DIN rails easily. (Mounting screws are included.) DIN Rail Mounting Plate Product Line Model PADP1 Dimensions (Unit = mm) PADP1 Mass: g Screws (Included) M3 Length mm 3 pieces DIN Rail Center AUDIN -, avenue de la malle Saint Brice Courcelles - Tel : Fax : Web : http: info@audin.fr 1

42 Dual Axes Mounting Brackets Mounting bracket for using two axes of Series motorized linear slides. X-Y Mounting X-Z Mounting Z-Axis Y-Axis X-Axis X-Axis Features Biaxial Configuration Can be Easily Implemented in Series. Using the specialized mounting bracket allows you to use two motorized linear slides in biaxial configuration. Various combinations are available such as X-Y or X-Z. Available Combinations X-Y Mounting X-Z Mounting X-Axis Y-Axis Transportable Mass (kg) X-Axis Z-Axis Transportable Mass (kg) EZSD EZS3D.3 or less EZSD EZS3D 3.5 or less EZSD EZS3D 5.7 or less EZSD EZS3D 3.5 or less EZSD EZSD 1.7 or less EZSD EZSD.7 or less The maximum length of a linear slide for the second axis (Y and Z) is 3 mm. This is applicable to products with 1 mm in lead. Speed is reduced by half for products with mm in lead. Specification values are based on those when the X-axis is mounted horizontally. Product Number Code PAB - S S3 R 5 Simple Streamlined Wiring with Specialized Cable Holder (Cable Holder sold separately) Specialized cable holders are available. Dual Axes Mounting Bracket First Axis Linear Slide S: EZSD S: EZSD Second Axis Linear Slide S3: EZS3D S: EZSD Combination Patterns R : R-Type L : L -Type in Second Axis First axis refers to X-axis, while second axis does Y- or Z-axis. Product Line Combination of EZS and EZS3 Combination of EZS and EZS3 Combination of EZS and EZS R-Type L-Type R-Type L-Type R-Type L-Type PAB-SS3R5 PAB-SS3L5 PAB-SS3R5 PAB-SS3L5 PAB-SSR5 PAB-SSL5 PAB-SS3R1 PAB-SS3L1 PAB-SS3R1 PAB-SS3L1 PAB-SSR1 PAB-SSL1 PAB-SS3R15 PAB-SS3L15 PAB-SS3R15 PAB-SS3L15 PAB-SSR15 PAB-SSL15 PAB-SS3R PAB-SS3L PAB-SS3R PAB-SS3L PAB-SSR PAB-SSL PAB-SS3R5 PAB-SS3L5 PAB-SS3R5 PAB-SS3L5 PAB-SSR5 PAB-SSL5 PAB-SS3R3 PAB-SS3L3 PAB-SS3R3 PAB-SS3L3 PAB-SSR3 PAB-SSL3 AUDIN -, avenue de la malle Saint Brice Courcelles - Tel : Fax : Web : http: info@audin.fr

Motorized Linear Actuators. EZS Series SPV Series EZC Series EZA Series PWA Series

Motorized Linear Actuators. EZS Series SPV Series EZC Series EZA Series PWA Series Motorized Linear Actuators EZS Series SPV Series EZC Series EZA Series PWA Series Advancing Positioning Applications Oriental Motor s Motorized Actuators Oriental Motor offers a broad lineup of motorized

More information

Motorized Cylinders. EZC Series. Stroke 150 mm

Motorized Cylinders. EZC Series. Stroke 150 mm Motorized Cylinders EZC Series Stroke 150 mm 1 Advancing Positioning Applications Oriental Motor's Motorized Cylinders The EZC Series motorized cylinder is designed to achieve greater convenience and performance

More information

RoHS Directive-Compliant Motorized Linear Slides EZS Series for Clean Room Use. Features

RoHS Directive-Compliant Motorized Linear Slides EZS Series for Clean Room Use. Features Motorized Actuators RoHS Directive-Compliant Series for Clean Room Use The Series for Clean Room Use is a product designed with the same level of function and performance as the Series but is ideal for

More information

High Power. EZA Series. High Thrust Force. Large Transportable Mass. Motorized Cylinders. Features

High Power. EZA Series. High Thrust Force. Large Transportable Mass. Motorized Cylinders. Features Motorized Cylinders For details on this product please refer to our website, contact technical support or your nearest Oriental Motor sales office. These motorized cylinders have a built-in LM guide. Greater

More information

SPV Series. Motorized Linear Slides. Features

SPV Series. Motorized Linear Slides. Features The employs an stepping motor and controller system for tuning-free, misstep-free operation. The belt driven actuator allows the load to be transferred at high-speed and long strokes. dditional Information

More information

Advanced "Positioning" is in your hand.

Advanced Positioning is in your hand. AZ Series Equipped Motorized Linear Slides Motorized Cylinders EAC Series / AZ Series Equipped Motorized Linear Slides Motorized Cylinders EAC Series / Lineup Added Battery-free Absolute Sensor Equipped

More information

Motorized Linear Slides/ Motorized Cylinders. DG Accessories. Linear and Rotary Actuators. Linear and Rotary Actuators E-99. Accessories.

Motorized Linear Slides/ Motorized Cylinders. DG Accessories. Linear and Rotary Actuators. Linear and Rotary Actuators E-99. Accessories. Linear and Rotary ctuators Introduction Linear and Rotary ctuators Motorized Linear Slides/ Motorized Cylinders ccessories ccessories EZS SPV EZC EZ PW Common ccessories DRL DG ccessories Motorized Linear

More information

Hollow Rotor. Large Bore Bearing. Hollow Rotor

Hollow Rotor. Large Bore Bearing. Hollow Rotor Linear and Rotary ctuators RoHS-Compliant Compact Linear ctuators DRL Series The drive mechanism adopts a 5-phase stepping motor with ball screw. The DRL Series achieves high positioning accuracy in a

More information

Compact Linear Actuators

Compact Linear Actuators Motorized ctuators Compact Linear ctuators DRL Series Motorized Linear Slides Motorized Cylinders Compact Linear ctuators Hollow Rotary ctuators Linear and Rotary ctuators Introduction EZS EZC EZHC EZHP

More information

Linear Guide Types of Motorized Linear Slides and Motorized Cylinders. SRS15WM 2 Blocks

Linear Guide Types of Motorized Linear Slides and Motorized Cylinders. SRS15WM 2 Blocks Linear Guide Types of Linear Slides and Cylinders The linear guides used on motorized linear slides and motorized cylinders are made by THK. The table below lists the products of linear guides used by

More information

Limit Switch A. Dog a

Limit Switch A. Dog a inear and Rotary Actuators RoHS-Compliant Rack and Pinion Systems S inear Heads Additional Information Technical reference Page F-1 2S 4S Vertical Stroke: F Type Horizontal Stroke: B Type Vertical Stroke:

More information

Hybrid Control System, Alpha Step

Hybrid Control System, Alpha Step B Hybrid Control System, Alpha Step Hybrid Control System B-1 Overview... B-2 Overview Hybrid Control System Battery-Free, Absolute Sensor Equipped AZ Series... B-16 Electric Linear Slides EZS Series AZ

More information

Stepper Motors ver ver.5

Stepper Motors ver ver.5 A Stepper s Stepper s A-1 Overview... A-2 Overview and... A-15 & Stepper and RK Series A-16 RK... A-47... A-51 Stepper Series A-52 Stepper Series A-8 See Full Product Details Online www.orientalmotor.com

More information

BLF Series. RoHS-Compliant Brushless DC Motor and Driver Package. Features

BLF Series. RoHS-Compliant Brushless DC Motor and Driver Package. Features Brushless DC Motors RoHS-Compliant Brushless DC Motor and Driver Package BLF Series The BLF Series brushless DC motor achieved a maximum motor speed of 4 r/min. With the digital operator, digital setting

More information

Rated Torque. Current. Starting Torque Single-Phase Three-Phase

Rated Torque. Current. Starting Torque Single-Phase Three-Phase Standard C s High Power Induction s BH Series 2 Frame Size: 14 mm Right-ngle Shaft Parallel Shaft Features 6 15 25 4 6 9 2 BH Series High Power 2 Smallest frame size among 2 motors Hypoid Gear-Employed

More information

E-124. Electric Cylinders EAC Series. AZ/AR Equipped. Features Compact and Powerful! E-124

E-124. Electric Cylinders EAC Series. AZ/AR Equipped. Features Compact and Powerful! E-124 E-14 Cylinders Technical reference Page H-1 Regulations & Standards Page I- AR The motor component incorporates a high-efficiency, energy-saving Series electric cylinder. In addition

More information

Stepping Motor and Driver Package. High-Efficiency AR Series. DC Power-Supply Input. Built-in Controller Type Pulse Input Type

Stepping Motor and Driver Package. High-Efficiency AR Series. DC Power-Supply Input. Built-in Controller Type Pulse Input Type Stepping Motor Driver Package High-Efficiency R Series DC Power-Supply Input Built-in Type Type The extensive R Series DC Power-Supply Input lineup that utilizes high-efficiency technology. Two types are

More information

High-Efficiency AR Series. RK Series /0.72 /Geared. CRK Series. RBK Series. CMK Series. 2-Phase Stepping Motors A-278.

High-Efficiency AR Series. RK Series /0.72 /Geared. CRK Series. RBK Series. CMK Series. 2-Phase Stepping Motors A-278. A Stepping Motors Stepping Motors Introduction A-2 Introduction AC Power Supply Input Stepping Motor and Driver Packages A-17 DC Power Supply Input Stepping Motor and Driver Packages Stepping Motors (Motor

More information

RoHS-Compliant Closed Loop Stepping Motor and Driver Package. AS Series ASC Series

RoHS-Compliant Closed Loop Stepping Motor and Driver Package. AS Series ASC Series RoHS-Compliant Closed Loop Stepping Motor and Driver Package AS Series ASC Series RoHS-Compliant Closed Loop Stepping Motor and Driver Package AS Series The is an innovative stepping motor unit that adopts

More information

Prewired position switches FF series

Prewired position switches FF series 2 Prewired position switches FF series Selection diagram 01 08 10 11 1 15 1 02 external rubber gasket external rubber gasket 1 52 54 55 56 5 ACTUATORS adjustable lever safety adjustable lever 41 45 46

More information

Linear Alignment. motion. 2 Flexible combination of XY. 4 High resolution and high responsiveness. accuracy. Optical linear encoder scale head

Linear Alignment. motion. 2 Flexible combination of XY. 4 High resolution and high responsiveness. accuracy. Optical linear encoder scale head SADE SADE/X SADE/S 2 2 Alignment Stage SA Linear motor drive SA DE Crossed roller bearing -table Linear Alignment Points 1Compact XY-table motion. Using a Linear Way L miniature linear motion rolling guide

More information

RoHS-Compliant. Brushless DC Motor and Driver Package BX Series

RoHS-Compliant. Brushless DC Motor and Driver Package BX Series RoHS-Compliant Brushless DC Motor and Driver Package BX Series RoHS-Compliant Brushless DC Motor and Driver Package BX Series The BX Series brushless DC motor and driver packages offer high performance

More information

5-Phase Stepping Motor and Driver Package RK Series

5-Phase Stepping Motor and Driver Package RK Series RoHS-Compliant -Phase Stepping Motor and Driver Package RK Series Standard Type PN Geared Type TH Geared Type Harmonic Geared Type RoHS-Compliant -Phase Stepping Motor and Driver Package RK Series The

More information

F-32. Compact Linear Actuators DRS2 Series. AZ Equipped. See Full Product Details Online

F-32. Compact Linear Actuators DRS2 Series. AZ Equipped. See Full Product Details Online F- Compact Linear Actuators DRS Series Equipped $ $ For detailed information about regulations and standards, please see the Oriental Motor website. The DRS Series actuators use the Series equipped with

More information

RoHS-Compliant. Watertight, Dust-Resistant Motors FPW Series

RoHS-Compliant. Watertight, Dust-Resistant Motors FPW Series RoHS-Compliant Watertight, Dust-Resistant s FPW Series 1 RoHS-Compliant Watertight, Dust-Resistant s FPW Series Induction Type The FPW Series are geared motors which conform to the IEC standard IP67 (Recognized

More information

5-Phase Stepping Motor and Driver Package CRKSeries 24 VDC Photocoupler Input 1-Pulse/2-Pulse Input Specifications

5-Phase Stepping Motor and Driver Package CRKSeries 24 VDC Photocoupler Input 1-Pulse/2-Pulse Input Specifications RoHS-Compliant -Phase Stepping Motor and Driver Package CRKSeries VDC Photocoupler Input -Pulse/-Pulse Input Specifications High-Resolution Type Standard Type PN Geared Type High-Torque Type TH Geared

More information

Electric Actuator/Slider Type Motor Parallel Type

Electric Actuator/Slider Type Motor Parallel Type INFORMATION Electric Actuator/Slider Type Motor Parallel Type RoHS Reduced in overall length Parallel Reduced dimension Reduced in height Reduced dimension Parallel In-line In-line Size Length reduction

More information

Linear & Rotary Actuators F-41

Linear & Rotary Actuators F-41 & F-41 & DRS Series Equipped Page Series Equipped F-4 F-41 F-4 Series Equipped $ $ For detailed information about regulations and standards, please see the Oriental Motor website. The Series is a line

More information

Brake Pack SB50W. Standard AC Motors A-143. Standard AC Motors Intro duction. Brake Pack. AC Speed Control Motors Inverter.

Brake Pack SB50W. Standard AC Motors A-143. Standard AC Motors Intro duction. Brake Pack. AC Speed Control Motors Inverter. Standard AC SB5W Standard AC Intro duction Induction Reversible Right -Angle Gearheads SB5W AC Speed Control Inverter SB5W US ES2 FE1/FE2 Watertight, Dust-Resistant Torque Accessories Installation A-143

More information

AS Series. RK Series. UMK Series ASX Series 0.36 /0.72. CRK Series. CMK Series 1.8. RBK Series. PK Series 1.

AS Series. RK Series. UMK Series ASX Series 0.36 /0.72. CRK Series. CMK Series 1.8. RBK Series. PK Series 1. A Stepping Motors Stepping Motors Introduction A-2 Introduction AC Input Stepping Motor and Driver Packages DC Input Stepping Motor and Driver Packages Stepping Motors (Motor Only) A-269 A-24 High Efficiency

More information

NX Series. Tuning-Free AC Servo Motor Unit

NX Series. Tuning-Free AC Servo Motor Unit Tuning-Free AC Servo Motor Unit NX Series An AC servo motor unit that is capable of high accuracy control with easy operation. Smooth operation can be achieved in high inertia loads or belt drive applications

More information

DRL Series. RoHS-Compliant Compact Linear Actuators. Features

DRL Series. RoHS-Compliant Compact Linear Actuators. Features Linear and Rotary ctuators RoHS-Compliant Compact Linear ctuators DRL Series The drive mechanism adopts a 5-phase stepping motor with ball screw. The DRL Series achieves high positioning accuracy in a

More information

Servo Motors B-1. Introduction B-2. NX Series B-9. Accessories B-47

Servo Motors B-1. Introduction B-2. NX Series B-9. Accessories B-47 B Servo Motors Servo Motors Introduction B-2 NX Series B-9 Accessories B-47 Introduction NX Accessories This catalog contains information necessary for informed product selection. Additional product details

More information

Stepper Motors A-15 Overview Motor & Driver Stepper Motors 5-Phase Stepper Motor and Driver 5-Phase

Stepper Motors A-15 Overview Motor & Driver Stepper Motors 5-Phase Stepper Motor and Driver 5-Phase Stepper s A- Overview Stepper s and -Phase Stepper and RKⅡ Series & -Phase RK -Phase -Phase Page -Phase Stepper and A-6 A- A-6 -Phase Stepper and $ $ For detailed information about regulations and standards,

More information

Servo Motors C-7. Overview. Tuning-Free NX. Tuning-Free NX Series. Servo Motors. Page. NX Series C-8 C-7

Servo Motors C-7. Overview. Tuning-Free NX. Tuning-Free NX Series. Servo Motors. Page. NX Series C-8 C-7 Servo Motors C-7 Servo Motors Page C-8 C-7 C-8 Servo Motor and Driver $ $ For detailed information about regulations and standards, please see the Oriental Motor website. The tuning-free servo motor and

More information

Electromagnetic. Brake Motors. Constant Speed Motors. Standard AC Motors A-109. Standard AC Motors Introduction. Brake Motors

Electromagnetic. Brake Motors. Constant Speed Motors. Standard AC Motors A-109. Standard AC Motors Introduction. Brake Motors Standard AC Constant Speed Standard AC Introduction Induction Reversible V Series Clutch & Synchronous Low-Speed Watertight, Synchronous Dust-Resistant Gearheads Page Features and Types of A-11 General

More information

St epping Mot or s C-i ORIENTAL MOTOR GENERAL CATALOG 2009/2010

St epping Mot or s C-i ORIENTAL MOTOR GENERAL CATALOG 2009/2010 C-i ORIENTAL MOTOR GENERAL CATALOG 29/21 C Introduction C-2 Stepping Motor and Driver Packages AC Input Stepping Motor and Driver Packages DC Input Stepping Motors AC Input AS Series C-14 DC Input ASC

More information

BLH. 24 VDC Input 15W / 30W / 50W / 100W BLH

BLH. 24 VDC Input 15W / 30W / 50W / 100W BLH BLH 24 VDC Input 15W / 30W / 50W / 100W BLH BLH BLH BLH BLH 2 3 System Configuration Geared Type/Combination Type Parallel Shaft Gearhead/Round Shaft Type The system configuration shown above is an example.

More information

Features and Types A-178 Right-Angle Gearheads A-180

Features and Types A-178 Right-Angle Gearheads A-180 ORIENTAL MOTOR CATALOGUE Standard AC Gearheads Features and Types A-7 Right-Angle Gearheads A-0 Brake FBL AXU AXH HBL MSS W ES US Gearheads Linear Heads Brushless Motor and Driver AC Speed Control Water

More information

AC Motor Systems. Speed Control Systems B-137. Speed Control Systems Introduction. BHF Series FE200 ES01/ US Series

AC Motor Systems. Speed Control Systems B-137. Speed Control Systems Introduction. BHF Series FE200 ES01/ US Series AC Motor Systems Speed Control Systems Introduction BHF Series FE1/FE2 ES1/ES2 US Series FB FE1/ FE2 ES1/ ES2 US Installation Page BHF Series B-138 FE1/FE2 B-156 ES1/ES2 B-172 US Series B-22 B-137 RoHS-Compliant

More information

BLU Series. RoHS-Compliant. Brushless DC Motor and Driver Package. Features

BLU Series. RoHS-Compliant. Brushless DC Motor and Driver Package. Features RoHS-Compliant Brushless DC Motor and Driver Package BLU Series The BLU Series combines a brushless DC motor and a panel-installation type driver, enabling speed control via simple wiring and easy operation.

More information

US Series Single-Phase 110/115 VAC Single-Phase 220/230 VAC

US Series Single-Phase 110/115 VAC Single-Phase 220/230 VAC RoHS-Compliant Speed Control Motor and Control Unit Package US Series Single-Phase 11/11 VAC Single-Phase 22/23 VAC RoHS-Compliant Speed Control Motor and Control Unit Package US Series Single-Phase 11/11

More information

RoHS-Compliant Brushless Motor Systems FBL Series. Features

RoHS-Compliant Brushless Motor Systems FBL Series. Features Speed Control Systems RoHS-Compliant Brushless Motor Systems FB Series The FB Series consists of a high performance, compact, brushless motor and driver. This product is available with 75 W (1/1 HP) and

More information

Environment Clean Room Specification

Environment Clean Room Specification Environment Clean Room Specification ISO Class 4 *1 (ISO14644-1) Built-in vacuum piping Possible to mount the main body without removing the external cover etc. Body-integrated linear guide specification

More information

Brushless Motors D-49. Overview. AC Input BMU. Brushless Motors. AC Input. Series BLE2. AC Input. BX Series. DC Input BLH.

Brushless Motors D-49. Overview. AC Input BMU. Brushless Motors. AC Input. Series BLE2. AC Input. BX Series. DC Input BLH. Brushless Motors D-49 Overview Brushless Motors Series Series BMU BLE2 BLH BLV D-49 D-50 Brushless Motor and Driver Series $ $ For detailed information about regulations and standards, please see the Oriental

More information

Space-saving installation Flexible motor mounting

Space-saving installation Flexible motor mounting Space-saving installation Flexible motor mounting compatible!! Pulse train input compatible Automatic actuator recognition Addition of new controller compatible with pulse trains Enables current position

More information

Mini slides SLTE, electric

Mini slides SLTE, electric Key features Range of applications Special features The electric mini slide SLTE is ideal for use in automation applications where controlled end-position cushioning (gentle stopping), constant travel

More information

Low voltage AC drives. ABB micro drives ACS to 3 hp/0.18 to 2.2 kw Catalog

Low voltage AC drives. ABB micro drives ACS to 3 hp/0.18 to 2.2 kw Catalog Low voltage AC drives ABB micro drives ACS55 0.25 to 3 hp/0.18 to 2.2 kw Catalog ACS55 IP20 Overview ACS55 micro drives are designed for use in a wide variety of simple machinery applications where only

More information

MODEL: PSN3. Final Control Elements. STROKE 6: 0 to 60 mm (0 to 2.36 )

MODEL: PSN3. Final Control Elements. STROKE 6: 0 to 60 mm (0 to 2.36 ) Final Control Elements SERVO-TOP II ELECTRONIC ACTUATOR (linear type; max. thrust 5000 N) Functions & Features Control valve actuator drive I to I positioner incorporated Lightweight, compact design High

More information

RX 3 M.C.B A up to 63 A

RX 3 M.C.B A up to 63 A 87045 LIMOGES Cedex Telephone: +33 5 55 06 87 87 FAX: +33 5 55 06 88 88 RX 3 M.C.B. 6000 A up to 63 A CONTENTS PAGES 1. Description, use... 1 2. Range... 1 3. Overall dimensions... 1 4. Preparation - Connection...

More information

240 g. 290 g. Compact and lightweight. Electric Actuators. Series LEPY/LEPS. Miniature Rod Type/Miniature Slide Table Type

240 g. 290 g. Compact and lightweight. Electric Actuators. Series LEPY/LEPS. Miniature Rod Type/Miniature Slide Table Type Electric ctuators Series LEPY/LEPS Miniature Rod Type/Miniature Slide Table Type Step Motor (Servo/2 VDC) and lightweight Rod Type Series LEPY Weight 2 g LEPY6-2 RoHS Maximum pushing force: N Positioning

More information

Safety Standards. Model Number:

Safety Standards. Model Number: Highlights & Features RoHS Compliant Relay alarm indirection Built-in 2 channel DC OK signal Caused by rugged handing Conformal coating on PCBA to protect against chemical and dust pollutants Class I,

More information

RX 3 M.C.B A up to 63 A

RX 3 M.C.B A up to 63 A 87045 LIMOGES Cedex Telephone: +33 5 55 06 87 87 FAX: +33 5 55 06 88 88 RX 3 M.C.B. 6000 A up to 63 A Cat. N (s): 4 197 49 to 4 199 23 CONTENTS PAGES 1. Description, use... 1 2. Range... 1 3. Overall dimensions...

More information

up to 63 A (1 module per pole)

up to 63 A (1 module per pole) 87045 LIMOGES Cedex Telephone: +33 5 55 06 87 87 FAX: +33 5 55 06 88 88 Direct current MCB DX 3 16kA, up to 63 A (1 module per pole) CONTENTS PAGE 1. Description - Use... 1 2. Range... 1 3. Overall dimensions...

More information

SPV Series Slides OPERATING MANUAL. Table of contents 1 Introduction Compliance with the EC Directives Names of parts...

SPV Series Slides OPERATING MANUAL. Table of contents 1 Introduction Compliance with the EC Directives Names of parts... HL-17012 SPV Series Slides OPERATING MANUAL Thank you for purchasing an Oriental Motor product. This Operating Manual describes product handling procedures. Please read this Operating Manual and the separate

More information

DG Series NEW. Hollow Rotary Actuators. RoHS-Compliant PRODUCTS. 60 mm 130 mm 200 mm. Frame Size

DG Series NEW. Hollow Rotary Actuators. RoHS-Compliant PRODUCTS. 60 mm 130 mm 200 mm. Frame Size NEW PRODUCTS RoHS-Compliant Hollow Rotary s 6 mm 1 mm 2 mm AUDIN - 8, avenue de la malle - 517 Saint Brice Courcelles - Tel :.26.4.2.21 - Fa :.26.4.28.2 - Web : http: www.audin.fr - Email : info@audin.fr

More information

Provided Capacitor E: Single-Phase 220V/230V. Motor

Provided Capacitor E: Single-Phase 220V/230V. Motor Standard AC Motor Type MSSW Series This is unit products which is combined a compact speed control pack and W-9W speed control motor. The gearhead shown in the photograph is sold separately. Product Number

More information

Conforms to Power Supply Voltages in Asia Induction Motors, Reversible Motors, and Electromagnetic Brake Motors

Conforms to Power Supply Voltages in Asia Induction Motors, Reversible Motors, and Electromagnetic Brake Motors RoHS Directive-Compliant Standard AC Motors World K Series Conforms to Power Supply Voltages in Asia Induction Motors, Reversible Motors, and Electromagnetic Brake Motors New products that conform to power

More information

LJ1H LEJS40 AC

LJ1H LEJS40 AC Low-profile/Low center of gravity Height dimension reduced by approx. 36% (Reduced by 32 mm) 9 Electric Actuator LEJ Series Slider Type/High Rigidity 58 (Former model) LJ1H2 3 5 1 LJ1H2 LEJS4 RoHS Series

More information

Unidrive M600 High performance drive for induction and sensorless permanent magnet motors

Unidrive M600 High performance drive for induction and sensorless permanent magnet motors Unidrive M600 High performance drive for induction and sensorless permanent magnet motors 0.75 kw - 2.8 MW Heavy Duty (1.0 hp - 4,200 hp) 200 V 400 V 575 V 690 V Unidrive M600 features Easy click-in keypad

More information

Paddle-wheel flow controller with optical principle for On/Off control

Paddle-wheel flow controller with optical principle for On/Off control Paddle-wheel flow controller with optical principle for On/Off control Type 8039 can be combined with... Indication, monitoring, transmitting and On/Off control in one device. Programmable s (transistor

More information

240 g. 290 g. Electric Actuators Series LEPY/LEPS. Miniature Rod Type/Miniature Slide Table Type

240 g. 290 g. Electric Actuators Series LEPY/LEPS. Miniature Rod Type/Miniature Slide Table Type Electric Actuators Series / Miniature Rod Type/Miniature Slide Table Type RoHS Compact and lightweight Rod Type Series Weight 24 g 6-25 Maximum pushing force: 5 N Positioning repeatability:.5 mm Possible

More information

Low voltage AC drives. ABB component drives ACS to 2.2 kw / 0.25 to 3 hp Catalog

Low voltage AC drives. ABB component drives ACS to 2.2 kw / 0.25 to 3 hp Catalog Low voltage AC drives ABB component drives ACS55 0.18 to 2.2 kw / 0.25 to 3 hp Catalog ABB component drives ABB component drives ABB component drives are designed to be incorporated into a wide variety

More information

Low-Speed. Constant Speed Motors. Standard AC Motors A-203. Standard AC Motors Introduction. Low-Speed Synchronous Motors.

Low-Speed. Constant Speed Motors. Standard AC Motors A-203. Standard AC Motors Introduction. Low-Speed Synchronous Motors. Standard C Constant Speed Low-Speed Synchronous Standard C Introduction Induction Reversible Electromagnetic Brake V Series Clutch & Brake Synchronous Low-Speed Synchronous Low-Speed Synchronous Watertight,

More information

5-PHASE STEPPING SYSTEMS. Ver.6.3

5-PHASE STEPPING SYSTEMS. Ver.6.3 -PHASE STEPPING SYSTEMS Ver.. AC Input Set Models AC Input Drivers DC Input Set Models, Full/half step DC Input Drivers Stepping Motors Stepping Motors, Linear Actuator Stepping Motors, Stepping Motors

More information

Electric Rotary Table

Electric Rotary Table Electric Rotary Table Series LER RoHS H Step Motor (Servo/24 VDC) Low profile New Continuous Basic type [mm] rotation Model H specification LER1 42 LER3 53 LER5 68 High precision type [mm] Model H LERH1

More information

Paddle-wheel flow controller for On/Off control

Paddle-wheel flow controller for On/Off control Paddle-wheel flow controller for On/Off control Type 803 can be combined with... Indication, monitoring, transmitting and On/Off control in one device Programmable s (transistor or relay) Automatic-calibration:

More information

LS Linear Heads. Standard AC Motors A-259. Standard AC Motors Introduction. Induction Motors. Reversible Motors. Brake Motors.

LS Linear Heads. Standard AC Motors A-259. Standard AC Motors Introduction. Induction Motors. Reversible Motors. Brake Motors. Standard C S inear Heads Standard C Introduction Induction Reversible Electromagnetic Brake V Series Clutch & Brake Synchronous ow-speed Watertight, Synchronous Dust-Resistant Torque Right-ngle Gearheads

More information

AZ Series Motor OPERATING MANUAL. Introduction. Safety precautions. CE Marking

AZ Series Motor OPERATING MANUAL. Introduction. Safety precautions. CE Marking HM-6244-3 OPERATING MANUAL Closed Loop Stepping and Driver Package AZ Series Introduction Before use Only qualified personnel should work with the product. Use the product correctly after thoroughly reading

More information

Programmable Controller

Programmable Controller RoHS-Compliant and Pinion Systems S Series dopting a rack and pinion mechanism and a closed loop stepping motor, the S Series achieves high positioning accuracy and high thrust force. It is a high-speed,

More information

Specifications. Safety Ratings. Standards. Safety Classification. Certifications. Safety Contacts. Auxiliary Contacts. Actuation Speed, Max.

Specifications. Safety Ratings. Standards. Safety Classification. Certifications. Safety Contacts. Auxiliary Contacts. Actuation Speed, Max. AUDIN - 8, avenue de la malle - 70 Saint Brice Courcelles - Tel : 0.6.0.0. - Fax : 0.6.0.8.0 - Web : http: www.audin.fr - Email : info@audin.fr 80T Direct Opening Action Description The 80T Direct Opening

More information

CATALOG. ABB micro drives ACS55, 0.18 to 2.2 kw

CATALOG. ABB micro drives ACS55, 0.18 to 2.2 kw CATALOG ABB micro drives ACS55, 0.18 to 2.2 kw 2 ABB MICRO DRIVES, ACS55, 0.18 TO 2.2 KW/0.25 TO 3 HP Ease of integration. ACS55 drives. 3 Table of contents 004 ABB micro drives, ACS55 005 Easily integrated

More information

5-Phase Stepper Motor

5-Phase Stepper Motor Ordering Information Application model: Standard shaft type, Hollow shaft type, Shaft type+ A 8K M 5 6 6 B Motor type Motor phase Rated current Max. Holding torque Shaft type Motor length : provides single

More information

RoHS-Compliant 2-Phase Stepping Motor and Driver Package RBK Series Microstep Drive

RoHS-Compliant 2-Phase Stepping Motor and Driver Package RBK Series Microstep Drive RoHS-Compliant -Phase Stepping Motor and Package RBK Series Microstep Drive -phase stepping motor and DC input microstep driver in one package. Includes Oriental Motor's proprietary Smooth Drive Function,

More information

Dual Axis Installation Bracket

Dual Axis Installation Bracket ccessories for EZS Series Z Equipped Dual xis Installation racket (Straight Type Only) These are dedicated mounting brackets for using electric linear slides from the EZS Series along two axes. X-Y Installation

More information

EZS Series Slider EZC Series Cylinder

EZS Series Slider EZC Series Cylinder HL01203 EZS Series Slider EZC Series Cylinder INSTALLATION MANUAL ORIENTAL MOTOR CO., LTD. Notes to the User This product must be handled by qualified personnel with expert knowledge of electrical and

More information

Information. Electric Slide Table/In-line Motor Type. Series LESH D. In-line motor type newly added to electric slide table!

Information. Electric Slide Table/In-line Motor Type. Series LESH D. In-line motor type newly added to electric slide table! Information kihabara UDX F, --, Sotokanda, Chiyoda-ku, Tokyo 0-00, PN UR http://www.smcworld.com 0 SMC Corporation ll Rights Reserved Electric Slide Table/In-line Motor Type Series ESHD In-line type newly

More information

Paddle-wheel flow controller for On/Off control

Paddle-wheel flow controller for On/Off control Paddle-wheel flow controller for On/Off control Type 8032 can be combined with... Indication, monitoring, transmitting and On/Off control in one device Programmable outputs (transistor or relay) Automatic-calibration:

More information

240 g. 290 g. Compact and lightweight. Electric Actuators. LEPY/LEPS Series. Miniature Rod Type/Miniature Slide Table Type

240 g. 290 g. Compact and lightweight. Electric Actuators. LEPY/LEPS Series. Miniature Rod Type/Miniature Slide Table Type Electric Actuators LEPY/LEPS Series Miniature Rod Type/Miniature Slide Table Type Compact and lightweight Rod Type LEPY Series Weight 24 g LEPY6-25 3 mm 2.5 mm Slide Table Type LEPS Series Weight 29 g

More information

SHOCK ABSORBER/DAMPER TESTING MACHINE

SHOCK ABSORBER/DAMPER TESTING MACHINE SHOCK ABSORBER/DAMPER TESTING MACHINE Dampening force of a shock absorber is directly proportional to velocity and this parameter needs to be precisely controlled. A small variation of 1mm in a stroke

More information

RCP5 Series ABSOLUTE. obo c y linde r. d e. RoboCylinder with Standard Battery-less Absolute Encoder

RCP5 Series ABSOLUTE.  obo c y linde r. d e. RoboCylinder with Standard Battery-less Absolute Encoder GB RoboCylinder with Standard Battery-less Absolute Encoder RCP Series ABSOLUTE www.r obo c y linde r. d e Introducing the RCP series actuator with battery-less absolute encoder, realizing the convenience

More information

ZWD100PAF. Conformity to RoHS Directive

ZWD100PAF. Conformity to RoHS Directive -SERIES Dual Output W - 225W Features 15 Complies the standard of the harmonics current limiter Worldwide input: 85-265VAC Peak load accommodatable double power: Approximately twice the value of average

More information

BLE2 Series D-42. Brushless Motor and Driver Package. Features Overview of BLE2 Series. Quick & Reliable Wiring/Connecting

BLE2 Series D-42. Brushless Motor and Driver Package. Features Overview of BLE2 Series. Quick & Reliable Wiring/Connecting D-42 Brushless Motor and Driver Package BLE2 Series Technical reference Page H-1 Regulations & Standards Page I-2 $For $ detailed information about regulations and standards, please

More information

Servo Motors ver ver.4

Servo Motors ver ver.4 C Servo Motors Servo Motors C-1 Overview... C-2 Overview Servo Motor and NX Series C-8 NX See Full Product Details Online www.orientalmotor.com Technical Support TEL: (800) 468-3982 Live Chat: www.orientalmotor.com

More information

Type. Page 518. A support guide is designed to support workpieces with significant overhang.

Type. Page 518. A support guide is designed to support workpieces with significant overhang. Environment Clean Room Specification ISO Class 4 *1 (ISO14644-1) Built-in vacuum piping Possible to mount the main body without removing the external cover etc. Body-integrated linear guide specification

More information

Safety Guard Switching Unit G9SX-GS

Safety Guard Switching Unit G9SX-GS Enabling Grip Switch CSM DS_E_5_1 Enabling Grip Switch with Distinct Feel for Three Easily Discernible Positions The difficult task of configuring safety circuits is now easily achieved by combining the

More information

STT280 SEALED TILT SENSOR

STT280 SEALED TILT SENSOR updated specification repeatability now ±0.07 STT280 SEALED TILT SENSOR Innovation In Motion INNOVATION IN MOTION The new STT280 sealed tilt sensor is designed to provide reliable, fit-and-forget tilt

More information

Watertight, Dust-Resistant. Motors. Standard AC Motors A-207. Standard AC Motors Intro duction. Motors. AC Speed Control Motors Inverter.

Watertight, Dust-Resistant. Motors. Standard AC Motors A-207. Standard AC Motors Intro duction. Motors. AC Speed Control Motors Inverter. Standard AC Standard AC Intro duction Induction Reversible Electromagnetic Brake Right-Angle Gearheads SB5W US ES2 FE1/FE2 AC Speed Control Inverter Torque Accessories Installation A-27 Standard AC RoHS-Compliant

More information

Positive displacement batch controller

Positive displacement batch controller 8075 Batch controller Positive displacement batch controller Type 8075 can be combined with... Compact version for DN15 to DN100 Dosing On site calibration by Teach-In Check of input/output signals Total

More information

Compact And High-Performance Of 2-Phase Stepper Motor Driver. RUN current

Compact And High-Performance Of 2-Phase Stepper Motor Driver. RUN current -Phase Unipolar Stepper Motor Driver Compact nd High-Performance Of -Phase Stepper Motor Driver Features Unipolar constant current drive type Enable to brake when it stops by STOP current adjustment Low

More information

RX 3 MCB 4500 A Phase + Neutral, neutral on left side

RX 3 MCB 4500 A Phase + Neutral, neutral on left side 87045 LIMOGES Cedex Téléphone : 05 55 06 87 87 Télécopie : 05 55 06 88 88 RX 3 MCB 4500 A CONTENTS PAGE 1. Description, use... 1 2. Range... 1 3. Overall dimensions... 1 4. Preparation - Connection...

More information

DX³ RCCBs - ID 4P up to 100 A

DX³ RCCBs - ID 4P up to 100 A 87045 LIMOGES Cedex Telephone number: +33 (0)5 55 06 87 87 Fax: +33 (0)5 55 06 88 88 DX³ s - ID CONTENTS PAGE 1. Description, use... 1 2. Range... 1 3. Overall dimensions... 1 4. Preparation - Connection...

More information

Description General-purpose models Timer-function models Output NPN PNP NPN PNP Part number E3X-NH11 E3X-NH41 E3X-NH21 E3X-NH51 Appearance

Description General-purpose models Timer-function models Output NPN PNP NPN PNP Part number E3X-NH11 E3X-NH41 E3X-NH21 E3X-NH51 Appearance R High-Precision Fiber-optic Amplifier TheEmploysa16-Bit Processor as An Industry First H An Automatic Sensitivity Adjustment feature allows stable detection of objects in frequently changing environments

More information

TX³ RCCBs 2P up to 100 A

TX³ RCCBs 2P up to 100 A 87045 LIMOGES Cedex Telephone number: +33 (0)5 55 06 87 87 Fax: +33 (0)5 55 06 88 88 TX³ RCCBs CONTENTS PAGE 1. Description, use... 1 2. Range... 1 3. Overall dimensions... 1 4. Preparation - Connection...

More information

2: A, B 3: A, B, Z 4: A, A _, B, B _ 6: A, A _, B, B _, Z, Z _

2: A, B 3: A, B, Z 4: A, A _, B, B _ 6: A, A _, B, B _, Z, Z _ Diameter mm Shaft Type/Hollow Type/Built-In Type Incremental Rotary Encoder Features Diameter mm flange type Suitable for measuring angle, position, revolution, speed, acceleration and distance Power supply:

More information

EMC-HD. C 01_2 Subheadline_15pt/7.2mm

EMC-HD. C 01_2 Subheadline_15pt/7.2mm C Electromechanical 01_1 Headline_36pt/14.4mm Cylinder EMC-HD C 01_2 Subheadline_15pt/7.2mm 2 Elektromechanischer Zylinder EMC-HD Short product name Example: EMC 085 HD 1 System = ElectroMechanical Cylinder

More information

Product and Company Overview

Product and Company Overview Product and Company Overview Company History Founded in 1885 2015 marked 130 years of incorporation 12 Factories 2,850 Employees $500 Million in Revenue Quality is First and Foremost Quick Delivery (1-9

More information

Information. Model LEYG16 LEYG25 LEYG32

Information. Model LEYG16 LEYG25 LEYG32 Information A rod type with guide newly added! Compatible with slide-bearing and ball-bushing bearing. Compatible with moment load and stopper (slide bearing). Speed control/positioning: ax. points Positioning

More information

Ball. Ball cage. Fig.1 Structure of Caged Ball LM Guide Actuator Model SKR

Ball. Ball cage. Fig.1 Structure of Caged Ball LM Guide Actuator Model SKR Caged all LM Guide Actuator Model Inner block all screw shaft Grease nipple Outer rail all cage all Structure and Features Fig.1 Structure of Caged all LM Guide Actuator Model Caged all LM Guide Actuator

More information

STT280 SEALED TILT SENSOR

STT280 SEALED TILT SENSOR STT280 SEALED TILT SENSOR PERFORMANCE ELECTRICAL Measurement range Supply voltage Vdc Over voltage protection Vdc Maximum supply current ma Reverse polarity protection Short circuit protection Output to

More information