Power Mod. Meter Stacks: WMM Residential Stacks. Residential Meter Stacks

Transcription

1 Meter Stacks: WMM Residential Stacks Residential Meter Stacks Power Mod s core offering of Residential Meter Stacks, type WMM, offers the widest product offering and flexibility in the industry. Each meter stack houses the QuickSystem features to maximize productivity and minimize labor costs. To aid in productivity and labor cost reductions our 5 Amp meter stacks feature a new breaker - the QS. The QS breaker adds to the Siemens exclusive feature set on our new 5 Amp Residential Meter Stacks. Benefits of the QS include: n An exclusive 6 high 5 Amp meter stack at the same height as our 15 Amp meter stack - 5 to 15 conversion: No conversion kit needed. n Single right hand bend wiring - saves time and wire n 100K AIC offered from 100 up to 5 Amps Siemens Residential Meter Stacks are packed with features inside and out: our exclusive knock out plate offers flexibility when pulling wires to the stack, new breaker supports keep breakers level and straight, moveable neutrals and grounds to save wire, and all of the QuickSystem features all designed with the contractor in mind. Residential Meter Stacks Quick Reference n -6 gang n 15/5 Amp per position n 100 Amp thru-bus rating n UL standard 67 n UL file no. E7100 n AIC rating (65k & 100k) n Voltage: - Single phase 10/40V AC max. - Three phase in single phase out 10/08V AC max. 40/10V AC max. n All swing latches and rivets are stainless steel. n NEMA 3R rated n G90 galvanized steel n ANSI 61 paint n Custom options now available! Details on page Siemens Industry, Inc. SPEEDFAX 011 Product

2 Meter Stacks: WMM Residential Stacks 1Ø, 4 Jaw Revised 1/15/11 Main Features: n Up to 5 amps and 6 meter positions n Equal 15 and 5 stack height n Install 15A breakers in 5A stacks n QS breaker Residential 4-Jaw Ring Type Meter Stacks: 1-phase, 3-wire SN, Incoming and Outgoing c WMM115 Residential 4-Jaw Ringless Type Meter Stacks: 1-phase, 3-wire SN, Incoming and Outgoing c (No bypass) Meter positions per stack Position (Horn bypass) Max. tenant breaker (Amps) Meter positions per stack provision Max. tenant breaker (Amps) Maximum AIC e provision Dimensions (inches) a Maximum AIC e Dimensions (inches) a0 Field installed 5th jaw assembly d Field installed 5th jaw assembly d Knockout Knockout Schematic Height Width Depth 65, ECMF5 KA-1 pg -86 SA-1 pg -88 WMM Position QP, QPH, 65, ECMF5 KA-13 pg -86 SA-13 pg -88 WMM Position 15 HQP, MP-T, MP-HT, 65, ECMF5 KA-14 pg -86 SA-14 pg -88 WMM Position MP-MT 65, ECMF5 KA-15 pg -86 SA-15 pg -88 WMM Position 65, ECMF5 KA-16 pg -86 SA-16 pg -88 WMM15 Position 100, ECMF5 KA- pg -87 SA-3 pg -89 WMM315 3 Position QS, QSH, QSHH, HQS, 100, ECMF5 KA-3 pg -87 SA-33 pg -89 WMM415 4 Position 5 bf HQSH, QP, QPH, HQP, 100, ECMF5 KA-4 pg -87 SA-3 pg -89 WMM515 5 Position MP-T, MP-HT, 100, ECMF5 KA-5 pg -87 SA-3 pg -89 MP-MT WMM615 6 Position 100, ECMF5 KA-6 pg -87 SA-3 pg -89 Schematic Height Width Depth WMM115R WMM115RB Position 15 HQP, QP, QPH, 65, ECMF5 KA-1 pg -86 SA-1 pg -88 WMM3115R WMM3115RB 3 Position MP-T, MP-HT, 65, ECMF5 KA-13 pg -86 SA-13 pg -88 WMM4115R WMM4115RB 4 Position MP-MT 65, ECMF5 KA-14 pg -86 SA-14 pg -88 WMM5115R WMM5115RB 5 Position 65, ECMF5 KA-15 pg -86 SA-15 pg -88 WMM6115R WMM6115RB 6 Position 65, ECMF5 KA-16 pg -86 SA-16 pg -88 WMM15R WMM15RB Position 5 bf QSHH, QS, QSH, 100, ECMF5 KA- pg -87 SA-3 pg -89 WMM315R WMM315RB 3 Position HQS, HQSH, 100, ECMF5 KA-3 pg -87 SA-33 pg -89 WMM415R WMM415RB 4 Position QP, QPH, 100, ECMF5 KA-4 pg -87 SA-3 pg -89 WMM515R WMM515RB 5 Position HQP, MP-T, 100, ECMF5 KA-5 pg -87 SA-3 pg -89 WMM615R WMM615RB 6 Position MP-HT, MP-MT 100, ECMF5 KA-6 pg -87 SA-3 pg -89 a Dimensions shown are representative of outside box dimensions and do not include allowances for mounting bumps, hubs, or hardware protrusions. b 5A available in lower three positions only. 00A continuous for all other positions. c NOT for use on 3-phase, 4-wire delta systems. d 5th jaw can be isolated if needed. e Max AIC determined by maximum AIC of tenant breakers. Higher ratings may be achieved through approved series rating combinations. f Install QP breakers below QS breakers. Product Category RESI Siemens Industry, Inc. SPEEDFAX 011 Product -83

3 Meter Stacks: WMM Residential Stacks 1Ø, 5 Jaw Revised 1/15/11 Main Features: n Up to 5 amps and 6 meter positions n Equal 15 and 5 stack height n Install 15A breakers in 5A stacks n QS breaker Residential 5-Jaw Ring Type Meter Stacks: 1-phase, 3-wire SN, Incoming and Outgoing cd WMM115J Meter positions per stack Position Max. tenant breaker (Amps) provision Dimensions (inches) a Maximum AIC e Height Width Depth Knockout Schematic 65, KA-1 pg -86 SA-1 pg -88 WMM3115J 3 Position QP, QPH, HQP, 65, KA-13 pg -86 SA-13 pg -88 WMM4115J 4 Position 15 MP-T, MP-HT, 65, KA-14 pg -86 SA-14 pg -88 WMM5115J 5 Position MP-MT 65, KA-15 pg -86 SA-15 pg -88 WMM6115J 6 Position 65, KA-16 pg -86 SA-16 pg -88 WMM15J Position 100, KA- pg -87 SA-3 pg -89 WMM315J 3 Position QS, QSH, QSHH, HQS, 100, KA-3 pg -87 SA-33 pg -89 WMM415J 4 Position 5 bf HQSH, QP, QPH, HQP, 100, KA-4 pg -87 SA-3 pg -89 WMM515J 5 Position MP-T, MP-HT, 100, KA-5 pg -87 SA-35 pg -89 MP-MT WMM615J 6 Position 100, KA-6 pg -87 SA-36 pg -89 Residential 5-Jaw Ringless Type Meter Stacks: 1-phase, 3-wire SN, Incoming and Outgoing cd (No bypass) (Horn bypass) Meter positions per stack Max. tenant breaker (Amps) provision Maximum AIC e Dimensions (inches) a Knockout Schematic Height Width Depth WMM115RJ WMM115RJB Position 15 HQP, MP-T, QP, QPH, 65, KA-1 pg -86 SA-1 pg -88 WMM3115RJ WMM3115RJB 3 Position MP-HT, MP-MT 65, KA-13 pg -86 SA-13 pg -88 WMM4115RJ WMM4115RJB 4 Position 65, KA-14 pg -86 SA-14 pg -88 WMM5115RJ WMM5115RJB 5 Position 65, KA-15 pg -86 SA-15 pg -88 WMM6115RJ WMM6115RJB 6 Position 65, KA-16 pg -86 SA-16 pg -88 WMM15RJ WMM15RJB Position 5 bf QSHH, HQS, QS, QSH, 100, KA- pg -87 SA-3 pg -89 WMM315RJ WMM315RJB 3 Position HQSH, QP, QPH, HQP, 100, KA-3 pg -87 SA-33 pg -89 WMM415RJ WMM415RJB 4 Position MP-T, 100, KA-4 pg -87 SA-3 pg -89 WMM515RJ WMM515RJB 5 Position MP-HT, MP-MT 100, KA-5 pg -87 SA-35 pg -89 WMM615RJ WMM615RJB 6 Position 100, KA-6 pg -87 SA-36 pg -89 a Dimensions shown are representative of outside box dimensions and do not include allowances for mounting bumps, hubs, or hardware protrusions. b 5A available in lower three positions only. 00A continuous for all other positions. c NOT for use on 3-phase, 4-wire delta systems. d 5th jaw can be isolated if needed. e Max AIC determined by maximum AIC of tenant breakers. Higher ratings may be achieved through approved series rating combinations. f Install QP breakers below QS breakers. -84 Siemens Industry, Inc. SPEEDFAX 011 Product Product Category RESI

4 Meter Stacks: WMM Residential Stacks 3Ø Incoming, 1Ø Outgoing Revised 1/15/11 Main Features: n Up to 5 amps and 6 meter positions n Equal 15 and 5 stack height n Install 15A breakers in 5A stacks n QS breaker n Field phasing Residential 5-Jaw Ring Type Meter Stacks: 3-phase, 4-wire SN, Incoming and 1-phase, 3-wire SN Outgoing cd WMM15J Meter positions per stack Position Max. tenant breaker (Amps) provision Maximum AIC e Dimensions (inches) a Factory stack phasing phases/sockets f Knockout Schematic Height Width Depth 65, AB, BC KA-1 pg -86 SA-1 pg -88 WMM315J 3 Position QP, QPH, 65, AB, BC, CA KA-13 pg -86 SA-13 pg -88 WMM415J 4 Position 15 HQP, MP-T, MP-HT, 65, AB, BC, CA, AB KA-14 pg -86 SA-14 pg -88 WMM515J 5 Position MP-MT 65, AB, BC, CA, AB, BC KA-15 pg -86 SA-15 pg -88 WMM615J 6 Position 65, AB, -BC, -CA KA-16 pg -86 SA-16 pg -88 WMM5J Position QS, QSH, 100, AB, BC KA- pg -87 SA-3 pg -89 WMM35J 3 Position QSHH,HQS, HQSH, 100, AB, BC, CA KA-3 pg -87 SA-33 pg -89 WMM45J 4 Position 5 bg QP, QPH, 100, AB, BC, CA, AB KA-4 pg -87 SA-34 pg -89 WMM55J 5 Position HQP, MP-T, MP-HT, 100, AB, BC, CA, AB, BC KA-5 pg -87 SA-35 pg -89 WMM65J 6 Position MP-MT 100, AB, -BC, -CA KA-6 pg -87 SA-36 pg -89 Residential 5-Jaw Ringless Type Meter Stacks: 3-phase, 4-wire SN, Incoming and 1-phase, 3-wire SN Outgoing cd (no bypass) (Horn Bypass) Meter positions per stack Max. tenant breaker (Amps) provision Maximum AIC e Dimensions (inches) a Height Width Depth Factory stack phasing phases/ socket f Knockout WMM15RJ WMM15RJB Position 65, AB, BC KA-1 pg -86 WMM315RJ WMM315RJB 3 Position 65, AB, BC, CA KA-13 QP, QPH, pg -86 WMM415RJ WMM515RJ WMM415RJB WMM515RJB 4 Position 5 Position 15 HQP, MP-T, AB, BC, KA-14 65, MP-HT, CA, AB pg -86 MP-MT AB, BC, KA-15 65, CA, AB, BC pg -86 WMM615RJ WMM615RJB 6 Position 65, AB, -BC, -CA KA-16 pg -86 KA- pg -87 WMM5RJ WMM5RJB Position 100, AB, BC WMM35RJ WMM45RJ WMM35RJB WMM45RJB 3 Position 4 Position 5 bg QS, QSH, QSHH, 100, AB, BC, CA KA-3 HQS, pg -87 HQSH, AB, BC, KA-4 100, QP, QPH, CA, AB pg -87 HQP, MP-T, AB, BC, KA-5 WMM55RJ WMM55RJB 5 Position MP-HT, 100, CA, AB, BC pg -87 MP-MT -AB, -BC, KA-6 WMM65RJ WMM65RJB 6 Position 100, CA pg -87 Schematic SA-1 pg -88 SA-13 pg -88 SA-14 pg -88 SA-15 pg -88 SA-16 pg -88 SA-3 pg -89 SA-33 pg -89 SA-34 pg -89 SA-35 pg -89 SA-36 pg -89 a Dimensions shown are representative of outside box dimensions and do not include allowances for mounting bumps, hubs, or hardware protrusions. b 5A available in lower three positions only. 00A continuous for all other positions. c Approved for use on 3-phase, 4-wire delta systems. Must field phase away from B phase (A & C phase only). d 5th jaw can be isolated if needed. e Max AIC determined by maximum AIC of tenant breakers. Higher ratings may be achieved through approved series rating combinations. f Residential Stacks are field phaseable. g Install QP breakers below QS breakers. Product Category RESI Siemens Industry, Inc. SPEEDFAX 011 Product -85

5 Meter Stacks: WMM Residential Stacks Knockout s 34-5/16 7" TO BOTTOM OF QUICK ROLL BRACKET 36" TO BOTTOM OF QUICK ROLL BRACKET 43-5/ /8 TO CENTER -13/16-13/3-7/16 1-5/8 1-5/3 (6) KOs 1, 1-1/4, 1-1/, " 4-3/8 TO CENTER -13/16-13/3 1-5/3 36" TO BOTTOM OF QUICK ROLL BRACKET 4-3/8 TO CENTER 5-5/ /3-7/16 (6) KOs 1, 1-1/4, 1-1/, " -13/16 1-5/3 KA-1 WMM115XX WMM15XXX 1-5/8 1-31/3 KA-13 WMM3115XX WMM315XXX -13/3-7/16 1-5/8 1-31/3 KA-14 (6) KOs 1, 1-1/4, 1-1/, " WMM4115XX WMM415XXX 13-3/3 13-3/3 8-3/3 8-3/3 15 Amp Typical Top View 36" TO BOTTOM OF QUICK ROLL BRACKET 61-5/ /16 36" TO BOTTOM OF QUICK ROLL BRACKET 3-1/4-9/3 (6) KOs 1, 1-1/4, 1-1/, " 15 Amp Typical Bottom View 4-3/8 TO CENTER -13/16-13/3 1-5/3 4-3/8 TO CENTER -7/16 1-5/8 1-31/3 (6) KOs 1, 1-1/4, 1-1/, -13/16-13/3 1-5/3 s KA-15 WMM5115XX WMM515XXX -7/16 1-5/8 1-31/3 KA-16 WMM6115XX WMM615XXX (6) KOs 1, 1-1/4, 1-1/, " -86 Siemens Industry, Inc. SPEEDFAX 011 Product

6 Meter Stacks: WMM Residential Stacks Knockout s L -3/8 TO SS BUS ENTER -13/16-13/3-7/16 1-5/8 7" TO BOTTOM OF QUICK ROLL BRACKET 15-3/8 TO CENTER 16-7/3 16-3/3 4-3/8 TO 1-5/3CENTER 4-3/8 TO -13/16 1-5/3 CENTER 1-5/3-13/3-13/16-7/16 36" TO BOTTOM OF 34-5/ /16 QUICK ROLL 5-5/16 36" TO BRACKET TTOM OF ICK ROLL RACKET 1-5/8 (6) KOs 1, 1-1/4, 1-1/, " 16-3/3 KA- WMM15XX WMM5XXX 8-3/3 (6) KOs 1, 1-1/4, 1-1/, " -13/3-7/16 1-5/8-13/16-13/3-7/ /3 1-5/8 (6) KOs 1, 1-1/4, 1-1/, " 16-3/3 KA-3 WMM315XX WMM35XXX 1-5/3 43-5/16 (6) KOs 1, 1-1/4, 1-1/, " 36" TO BOTTOM OF QUICK ROLL BRACKET 4-3/8 TO CENTER -13/16-13/3-7/16 1-5/8 16-3/3 KA-4 WMM415XX WMM45XXX 1-5/3 5-5/16 (6) KOs 1, 1-1/4, 1-1/, " 16-7/3 8-3/3 5 Amp Typical Top View 61-5/16 4" " -3/16 36" TO BOTTOM OF QUICK ROLL BRACKET 36" TO BOTTOM OF QUICK ROLL BRACKET 70-5/16 3-1/4-9/3 (6) KOs 1-1/,, -1/" 5 Amp Typical Bottom View 4-3/8 TO CENTER -13/16-13/3-7/16 1-5/8 16-3/3 KA-5 WMM515XX WMM55XXX 1-5/3 (6) KOs 1, 1-1/4, 1-1/, " 4-3/8 TO CENTER -13/16-13/3-7/16 1-5/8 16-3/3 KA-6 WMM615XX WMM65XXX 1-5/3 (6) KOs 1, 1-1/4, 1-1/, " s Siemens Industry, Inc. SPEEDFAX 011 Product -87

7 Meter Stacks: WMM Residential Stacks Schematics SA-1 WMM115XX WMM15XX SA-13 WMM3115XX WMM315XX s -88 SA-14 WMM4115XX WMM415XX Siemens Industry, Inc. SPEEDFAX 011 Product SA-15 WMM5115XX WMM515XX SA-16 WMM6115XX WMM615XX

8 Meter Stacks: WMM Residential Stacks Schematics SA-3 WMM15XXX WMM5XXX SA-33 WMM315XXX WMM35XXX SA-34 WMM415XXX WMM45XXX SA-35 WMM515XXX WMM55XXX s SA-36 WMM615XXX WMM65XXX Siemens Industry, Inc. SPEEDFAX 011 Product -89

9 Meter Stacks: WML Lever Bypass Stacks Introduction Lever Bypass Meter Stacks Commercial Lever Bypass meter stacks (type WML) are designed to meet the requirements of those utilities specifying lever bypass meter sockets for residential and commercial applications. Features include: n QuickSystem features n High-quality, time-proven Landis & Gyr HQ sockets n A line of 3-phase 100 Amp meter stacks to minimize tenant main cost n Removable back knockout plate to facilitate wiring n 5 Amp capability in single and three phase designs n Up to 4 positions with 5 Amp tenant mains, up to positions with 400 Amp tenant mains n Ease of wiring tenant mains require only a single bend Lever Bypass Meter Stacks Quick Reference n 100A/5A 1-4 position n 400A 1- position n 100A thru-bus rating n UL Standard # UL67 n UL file # E7100 n AIC rating (5K, 65K & 100K) n Voltage - Single phase 10/40V AC max - Three in single phase out 08Y/10V AC - Three Phase 40V AC max n All swing latches and rivets are stainless steel. n NEMA 3R rated n G90 Galvanized Steel n ANSI 61 Paint n Custom options now available! Details on page Siemens Industry, Inc. SPEEDFAX 011 Product

10 Meter Stacks: WML Lever Bypass Stacks 1Ø Tenant Main Meter positions per stack Max. tenant breaker (Amps) Provisions Maximum AIC c Dimensions (inches) a Height Width Depth Stack phasing phases/sockets Knockout 1-phase, 3-wire SN, incoming and outgoing, lever bypass, 5-jaw sockets b WML115RJ 1 100, WML15RJ QS, QSH, QSHH, HQS, HQSH, QP, 100, QPH, HQP, WML315RJ 3 MP-T, MP-HT, MP-MT 100, WML415RJ 4 100, WML11400RJ d 1 5, JXD6B Factory inst WML1400RJ d 5, L-1 L- L-3 L-4 L-5 L-6 3-phase, 4-wire SN, incoming and 1-phase, 3-wire SN outgoing, lever bypass, 5-jaw sockets be WML15RJ 1 100, AB WMLAB5RJ 100, AC, 1-BC WMLBC5RJ 100, AC, 1-AB QS, QSH, WMLCA5RJ QSHH, HQS, 100, AB,1-BC HQSH, QP, 5 QPH, HQP, WML35RJ 3 MP-T, MP-HT, 100, AB,1-BC,1-CA MP-MT WML4AB5RJ 4 100, AB,1-BC,1-CA WML4BC5RJ 4 100, AB,-BC,1-CA WML4CA5RJ 4 100, AB,1-BC,-CA WML1400RJ d 1 5, AB JXD6B Factory Inst WML400RJ d 5, AB,1-BC a Dimensions shown are representative of outside box dimensions and do not include allowances for mounting bumps, hubs, or hardware protrusions. b Not for use on 3-phase, 4-wire delta systems c Max AIC determined by maximum AIC of tenant breakers when used in conjunction with a meter socket. Higher overall ratings may be achieved through approved series rating combinations. d Alternate amperage breakers are available. Please see table on right for suffix that needs to be added. Additional lead time may apply. Contact sales office for details. e Commerical Stacks are not field phaseable. Alternate amperage breakers Add Suffix 1 Meter Position Per Stack T1 T T3 Amperage 00A 50A 300A T4 350A Add Suffix Meter Positions Per Stack T5 T6 Amperage L-1 L- L- L- L-3 L-4 L-4 L-4 L-5 L-6 00A/00A 00A/50A T7 00/300A T8 00/350A T9 00/400A T10 50A/300A T11 50A/350A T1 50A/400A T13 300A/300A T14 300A/350A T15 300A/400A T16 350A/350A T17 350A/400A T18 50A/50A Product Category RESI Siemens Industry, Inc. SPEEDFAX 011 Product -91

11 Meter Stacks: WML Lever Bypass Stacks 3Ø Tenant Main Meter positions per stack Max. tenant breaker (Amps) c provisions Maximum AIC c Height Width Depth Dimensions (inches)a Knockout 3-phase, 4-wire SN, Incoming and Outgoing, Lever Bypass, 7-Jaw Sockets e WML13100RJ b 1 65, WML3100RJ b QP, MP-T, 65, QPH, MP-HT, 100 HQP, MP-MT WML33100RJ b 3 65, WML43100RJ b 4 65, WML135RJ 1 100, WML35RJ QJ, QJH, 100, QJH, HQJH, 5 MQ, MQH, WML335RJ 3 MQL 100, WML435RJ 4 100, WML13400RJ d 1 5, JXD63B Factory Inst WML3400RJ d 5, L-7 page -94 L-8 page -94 L-9 page -94 L-10 page -94 L-11 page -94 L-1 page -94 L-13 page -95 L-14 page -95 L-5 L-6 Alternate amperage breakers Add Suffix 1 Meter Position Per Stack T1 T T3 Amperage 00A 50A 300A T4 350A Add Suffix Meter Positions Per Stack T5 T6 Amperage 00A/00A 00A/50A T7 00/300A T8 00/350A T9 00/400A T10 50A/300A T11 50A/350A T1 50A/400A T13 300A/300A T14 300A/350A T15 300A/400A T16 350A/350A T17 350A/400A T18 50A/50A a Dimensions shown are representative of outside box dimensions and do not include allowances for mounting bumps, hubs, or hardware protrusions. b 3-pole breakers only c Max AIC determined by maximum AIC of tenant breakers when used in conjunction with a meter socket. Higher overall ratings may be achieved through approved series rating combinations. d Alternate amperage breakers are available. Please see below table for suffix that needs to be added. Additional lead time may apply. Contact sales office for details. e Rated for use with 40/10V Delta systems -9 Siemens Industry, Inc. SPEEDFAX 011 Product Product Category RESI

12 Power Mod Meter Stacks: WML Lever Bypass Stacks Knockout s L-1 WML115RJ WML15RJ L-4 WML415RJ WML4AB5RJ WML4BC5RJ WML4CA5RJ WMLBC5RJ WMLCA5RJ L-5 WML11400RJ WML1400RJ WML13400RJ L-3 WML315RJ WML35RJ L-6 WML1400RJ WML400RJ WML3400RJ Siemens Industry, Inc. SPEEDFAX 011 Product -93 L- WML15RJ WMLAB5RJ

13 Power Mod Meter Stacks: WML Lever Bypass Stacks Knockout s L-7 L-8 L-9 WML13100RJ WML3100RJ WML33100RJ L-11 WML135RJ -94 L-10 L-1 WML43100RJ WML35RJ Siemens Industry, Inc. SPEEDFAX 011 Product

14 Power Mod Meter Stacks: WML Lever Bypass Stacks Knockout s L-13 L-14 WML335RJ WML435RJ WML11400RJ EQUIPMENT GROUND A B N A N B C A N B C WML1400RJ WML13400RJ 1-Phase Incoming & Outgoing WML15RJ WMLBC5RJ WML4AB5RJ WMLX15RJ 3-Phase Incoming & Outgoing WMLAB5RJ WML4BC5RJ WML4CA5RJ WMLCA5RJ WML35RJ WMLX3100RJ WMLX35RJ Siemens Industry, Inc. SPEEDFAX 011 Product -95

15 Meter Stacks: WMK K-Base Stacks Introduction K-Base Meter Stacks Commercial K-Base Meter Stacks (type WMK) are designed to meet the requirements of those utilities specifying bolt-in meter sockets for 400 and 600 Amp residential and commercial applications. Features include: n QuickSystem features n Exclusive Landis & Gyr K4, K5, & K7 meter sockets n 1 position K4, K5, K7 modules with 400 & 600 Amp tenant mains n position K7 module with 400 Amp tenant main n Space saving design K-Base Meter Stacks Quick Reference n 400A & 600A 1- positions n 100A Thru bus-rating n UL Standard # UL67 n UL file # E7100 n AIC Rating (5k) n Voltage - Single Phase 10/40V AC Max - Three In Single Phase Out 08Y/10V AC - Three Phase 40V AC Max n All swing latches and rivets are stainless steel n NEMA 3R rated n G90 Galvanized Steel n ANSI 61 Paint n Custom options now available! Details on page Siemens Industry, Inc. SPEEDFAX 011 Product

16 Meter Stacks: WMK K-Base Stacks 1Ø and 3Ø K-Base stacks use bolt-in meters. Contact utility prior to installation Meter positions per stack Max. tenant breaker (Amps) provision d Dimensions (inches) a 1-phase, 3-wire SN, Incoming and Outgoing, K4 K-Base Bolt-in, 5k AIC c WMK11400R d JXD6B400 Factory Inst. WMK11600R g LXD6B600 Factory Inst. Height Width Depth Phase Knockout KB-1 page KB-1 page phase, 4-wire SN, incoming and 1-phase, 3-wire SN outgoing, K5 K-Base bolt-in bf, 5k AIC c WMK1400RJ d JXD6B400 Factory Inst. WMK400RJ 400 JXD6B400 Factory Inst AB KB- page AC KB-3 page phase, 4-wire SN, incoming and outgoing, K7 K-Base bolt-in e, 5k AIC c WMK13400RJ d JXD63B Factory Inst. WMK3400RJ d WMK13600RJ g LXD63B600 Factory Inst KB- page -98 KB-3 page -98 KB- page -98 a Dimensions shown are representative of outside box dimensions and do not include allowances for mounting bumps, hubs, or hardware protrusions. b Not for use on 3-Phase 4-wire delta systems c Max AIC determined by maximum AIC of tenant breakers when used in conjunction with a meter socket. Higher overall ratings may be achieved through approved series rating combinations d Alternate amperage breakers are available. Please see table below for suffix that needs to be added for ordering. Extended leadtime may apply. Contact sales office for more details. e Rated for use with 40/10V Delta systems f Commerical Stacks are not field phaseable g Alternate amperage breakers are available (T19 and T0). Please see table below for suffix that needs to be added for ordering. Extended leadtime may apply. Contact sales office for more details. Alternate amperage breakers Add Suffix 1 Meter Position Per Stack T1 T T3 T4 T19 T0 Amperage 00A 50A 300A 350A 450A 500A Add Suffix Meter Positions Per Stack T5 T6 Amperage 00A/00A 00A/50A T7 00/300A T8 00/350A T9 00/400A T10 50A/300A T11 50A/350A T1 50A/400A T13 300A/300A T14 300A/350A T15 300A/400A T16 350A/350A T17 350A/400A T18 50A/50A Product Category RESI Siemens Industry, Inc. SPEEDFAX 011 Product -97

17 Power Mod Meter Stacks: WMK K-Base Stacks Knockout s KB- KB-1 WMK1400RJ WMK13400RJ WMK13600RJ WMK11400R WMK11600R WMK11X00R EQUIPMENT GROUND A A N B C A N B C WMK1X00RJ KB-3 WMK400RJ WMK3400RJ -98 Siemens Industry, Inc. SPEEDFAX 011 Product B N WMK13X00RJ

18 Meter Stacks: WMT Test Block Bypass Stacks Introduction Test Block Bypass Meter Stacks Commercial Test Block Bypass Meter Stacks (type WMT) are designed to meet the requirements of those utilities specifying test block bypass meter sockets for commercial applications in areas subscribing to the EUSERC standards. Features include: n QuickSystem features n High-quality, time-proven Siemens SMM switchboard meter socket n Removable back knockout plate to facilitate wiring n 5 Amp capability in single and three phase designs n Up to 3 positions with 5 Amp tenant mains n Wiring flexibility - tenant mains require only a single bend n Three phase input, single phase output modules n In line wiring: side knockouts allow wiring for adjacent units to pass through Test Block Bypass Meter Stacks Quick Reference n 5A 1-3 positions n 100A thru-bus rating n UL Standard # s UL67 n UL file # E7100 n AIC Rating (100k) n Voltage - Single phase 10/40V AC max - 3 phase in single phase out 10Y/08V AC max - Three phase 40V AC max n All swing latches and rivets are stainless steel n NEMA 3R rated n G90 galvanized steel n ANSI 61 paint n EUSERC drawing s 31 and 353 n Custom options now available! Details on page -103 Siemens Industry, Inc. SPEEDFAX 011 Product -99

19 Meter Stacks: WMT Test Block Bypass Stacks Commercial Ringless Type Meter Stacks: Test Block Bypass,100k AIC c Meter positions per stack Max. tenant breaker (Amps) provisions Dimensions (inches) a Height Width Depth Phase Knockout 1-phase, 3-wire SN, Incoming and Outgoing, Test Block Bypass, 4-Jaw Sockets b WMT115 WMT QS, QSH, QSHH, HQS, HQSH, QP, QPH, HQP, MP-T, MP-HT, MP-MT WMT TB-1 page -101 TB- page -101 TB-3 page phase, 4-wire SN, Incoming and 1-phase, 3-wire SN Outgoing, Test Block Bypass, 5-Jaw Sockets b e WMT15J AB TB-1 page -101 WMTAB5J BC, 1-CA TB- QS, QSH, QSHH, page -101 WMTBC5J 5 HQS, HQSH, QP, AB, 1-CA TB- QPH, HQP, MP-T, page -101 WMTCA5J 5 MP-HT, MP-MT AB, 1-BC TB- page -101 WMT35J phase, 4-wire SN, Incoming and Outgoing, Test Block Bypass, 7-Jaw Sockets d WMT135J WMT35J 5 QJ, QJH, QJH, HQJH, MQ, MQH, MQL WMT335J AB, 1-BC, 1-CA TB-3 page -101 TB-4 page -101 TB-5 page -101 TB-6 page -101 a Dimensions shown are representative of outside box dimensions and do not include allowances for mounting bumps, hubs, or hardware protrusions. b Not for use on 3-phase,4-wire delta systems. c Max AIC determined by maximum AIC of tenant breakers when used in conjunction with a meter socket. d Rated for use with 40/10V Delta systems. e Commercial Stacks are not field phaseable Siemens Industry, Inc. SPEEDFAX 011 Product Product Category RESI

20 Power Mod Meter Stacks: WMT Test Block Bypass Stacks Knockout s TB- TB-1 WMT15J WMT315J WMTCA5J TB-3 WMTAB5J WMTBC5J TB-4 WMT35J WMT135J TB-5 TB-6 WMT35J WMT335J Siemens Industry, Inc. SPEEDFAX 011 Product -101

21 Meter Stacks: WMT Test Block Bypass Stacks Schematics WMT115 WMT15 WMT315 A N B C A N B C NEUTRAL LUGS NEUTRAL (POTENTIAL JAW) EQUIPMENT GROUND L L L L I O I O N A N A E D E D WMT5J WMTAB5J WMTBC5J WMTCA5J WMT35J WMT135J WMT35J WMT335J -10 Siemens Industry, Inc. SPEEDFAX 011 Product