500 Ocean Breaker Electrical Submittals

Transcription

1 X 02/5/6 JDF Submittal #093 DIV 6 IMC RESUBMITTAL #2 Electrical Gear #640, # Ocean Breaker Electrical Submittals

2 Interrupting Capacity Ratings Of Disconnect Devices Molded Case Circuit Breakers Normal and Heavy Duty Normal duty breakers are designed for commercial, industrial, institutional and other heavy duty applications. They are rated up to 600 volts ac; 500 volts dc. Heavy duty breakers have higher interrupting ratings than normal duty. Type FD6, FXD6 Heavy Duty ThermalMagnetic Breaker Extra Heavy Duty These are designed for heavy duty applications where the interrupting requirements exceed the ratings of heavy duty breakers. They are rated up to 600 volts ac and 500 volts dc. Solid State Trip Equipped with solid state tripping, and available in heavy duty and extra heavy duty interrupting ratings at 600V ac. Type SHJD / SHLD Extra Heavy Duty SolidState Trip CurrentLimiting These breakers incorporate the exclusive Siemens blowapart interruption principle and meet the NEC requirements for currentlimiting breakers. Currentlimiting circuit breakers can limit the letthrough l 2 t to a value less than the l 2 t of onehalf cycle wave of the symmetrical prospective current without any fusible elements when operating within their currentlimiting range. All breakers are 2pole for DC rating. Extra heavy duty breakers are inherently fungusproof and do not require fungus treatment. Maximum Ampere Rating Normal Duty ThermalMagnetic BQH 5 BLH BQD BL QJ2 JXD2 Heavy Duty ThermalMagnetic 5 ED HND6/HNXD HPD6/HPXD HRD6/HRXD6 Extra Heavy Duty SolidState Trip SHTD6 SHHTD6 CurrentLimiting ThermalMagnetic CED6 CFD6 CJD6 CLD6 CMD6 CND6 CPD6 CurrentLimiting SolidState Trip Available Amperage Range Breaker Type Heavy Duty SolidState Trip ED4 ED6 QJH2 FXD6/FD6 JXD6/JD6 LXD6/LD6 LMXD6/LMD6/ MXD6/MD6 NXD6/ND6 PXD6/PD6 RXD6/RD6 SJD6 SLD6 SMD6 SND6 SPD STD6 Extra Heavy Duty ThermalMagnetic HBL HED HHED QJ2H HFD6 HJD6/HJXD6 HLD6/HLXD6 HLMD6/HLMXD HHFD6 HHJD6/HHJXD6 HHLD6/HHLXD6 HMD6/HMXD SHJD SHLD SHMD SHND SHPD SCJD SCLD SCMD SCND6 Maximum Interrupting Capacity Symmetrical RMS Amperes V In DC Amperes (VDC) 240V 480V 600V 250V 500V 22,000 0,000 65,000 0,000 65,000 22,000 65,000 65,000 85,000 65,000,000 42,000, ,000, ,000, ,000,000,000, , ,000 50,000, ,000 4,000 30,000 8,000 25,000 35,000 50,000 35,000 50,000 65,000 42,000 65,000 65,000,000 65,000,000 65,000,000 65,000 65,000,000 50, ,000 50,000,000 8,000 22,000 25,000 25,000 50,000 30,000 25,000 25,000 30,000 25,000 25,000 35,000 30,000 25,000 50,000 35,000 30,000 35,000 50,000 25,000 50,000 35,000 50,000 65,000,000,000 65,000 50,000,000,000 65,000 5,000 30,000 30,000 30,000 8,000 8,000 25,000 50,000 30,000 50,000

3 7 The term Series Connected Short Circuit Rating refers to the application of series circuit breakers in a combination that allows downstream breakers to have lower individual interrupting ratings than the available fault current. 240V Series Ratings UL Series Connected Rating 22,000 Main Breaker Maximum Type Amperes QPH, BQH, BLH QPPH 70 (P) 25 (2P) (3P) 225 (2P) QPMH 200 (2P) QJH2 225 (2 & 3P) 42,000 QJ2H 225 (2 & 3P) 65,000 HQP, HBQ, HBL HQPP ED4, ED6 70 (P) 25 (2P) (3P) 225 (2P) Branch Breaker Type This is permitted as long as the series combination has been tested and certified by UL. The tables on these pages list specific main and branch breaker combinations that may be used for the short circuit interrupting ratings shown. Number of Poles Voltage Amperes 20/ QP, BQ, BL QE, BLE, QPF, BLF, 2 20/ QAF, BAF QE, BLE, BE, QPF, BQF, BLF, QAF, BAF QT, 2 20/ QG, BG, 2 20/ / QP, BQ, BL 2 20/ QE, BLE, BE, QPF, BQF, BLF, QAF, BAF QE, BLE, BE, QPF, 2 20/ BLF, QAF, BAF QPP 2 20/ QT, 2 20/ / / QP 20/ / QE, QPF, QAF, BAF QT 2 20/ / QP, BQ, BL QPF, BQF, BLF, BG, BLG, QE, BE, BLE, QAF, BAF QPF, BLF, BG, BLG, QE, 2 20/ BE, BLE, QAF, BAF QT, 2 20/240 5, 20, 40 20/ QP, BQ, BL 2 20/ / QPH, BQH, BLH 2 20/ QJH2 2, / QP, BQ, BL, QPH, BQH, BLH 20/ QPF, BQF, BLF, BE, QPHF, BQHF, BLHF, QEH, BLEH, QE, BLE, QAFH, BAFH, QAF, BAF QEH, BLEH, QE, QPHF, BLHF, BLE, QPF, BLF, 2 20/ QAFH, BAFH, QAF, BAF QT, 2 20/ QG, BG, 2 20/ QP, BQ, BL, QPH, BQH, BLH 20/ / QPF, BQF, BLF, QPHF, BQHF, BLHF, QEH, BLEH, QE, BLE, BE, 20/ QAFH, BAFH, QAF, BAF QEH, BLEH, QE, QPHF, BLHF, BLE, QPF, BLF, 2 20/ QAFH, BAFH, QAF, BAF QT, QPPH, QPP 2 20/ (P) QP, BQ, BL, QPH, 25 (2 & 3P) BQH, BLH 20/ V Series Ratings (Continued) UL Series Connected Rating Main Breaker Type ED4, ED6 (Cont.) FD6A, FXD6A 65,000 MD6, MXD6, (Continued) ND6, NXD6, PD6, PXD6, RD6, RXD6 No substitutions are permitted. All combinations shown have been tested and are UL Listed. This information is provided as a reference tool only. For verification of specific combination ratings consult the UL Recognized Components Directory. Maximum Amperes 250 (2 & 3P) JXD2A, JD6A, 600 JXD6A, (2 & 3P) LD6A, LXD6A HJD6A, HJXD6A, HLD6A, HLXD6A, 2000 HMD6, HMXD6, (2 & 3P) HND6, HNXD6, HPD6, HPXD6, HRD6, HRXD6 SJD6A, SLD6A, SMD6, SND6, SPD6 NDGA NFGA 600 (2 & 3P) 2000 (2 & 3P) (2P, 3P) (2P, 3P) NJGA / NJJA (2P, 3P) NLGA NMG NNG NPG (2P, 3P) (2P, 3P) (2P, 3P) (2P, 3P) Branch Breaker Type Number of Poles Voltage Amperes QPHF, BQHF, BLHF, QPF, BQF, BLF, QE, QEH, BLEH, BE, BLE, QAFH, BAFH, QAF, BAF QEH, BLEH, QE, QPHF, BLHF, BLE, QPF, BLF, QAFH, 2 20/ BAFH, QAF, BAF ED2, 2, 3 20/240 5 QT, 2 20/ QP, BQ, BL, QPH, BQH, BLH 20/ / QPF, QPHF, BLF, BLHF, QAF, QAFH,, 2 20/ BAF, BAFH QJ2H, QJ2, QJH2 2, QPPH 2 20/ / QPH, BQH, BLH 2 20/ QJ2H, QJH2 2, QPH QPH, BQH, BLH QPH, BQH, BLH 20/ / / / / / / QPH, BQH, BLH 2 20/ / QPH, BQH, BLH 2 20/ / QPH, BQH, BLH 2 20/ QN, QNH 2 20/ QNR, QNRH 2 20/ / QPH, BQH, BLH 2 20/ QN, QNH 2 20/ QNR, QNRH 2 20/ / QPH, BQH, BLH 2 20/ QN, QNH 2 20/ QNR, QNRH 2 20/ / QPH, BQH, BLH 2 20/ QN, QNH 2 20/ QNR, QNRH 2 20/ / QPH, BQH, BLH 2 20/ QN, QNH 2 20/ QNR, QNRH 2 20/ SPEEDFAX 20 Product Catalog

4 Meter Center Tenant & House Panel Breakers 2 0K AIC 22K AIC 42K AIC 65K AIC K AIC Amperage Siemens Type QP Murray Type MPT Siemens Type QPH Murray Type MPHT Siemens Murray Siemens Type HQP Murray Type MPMT Siemens Murray For use in 25 Amp and 225 Amp single phase output WMM, WML, WMT meter stacks 60 Q260 MP260 Q260H MP260KH Q260HH MP260KM Q260HH MP260KM 70 Q270 MP270 Q270H MP270KH Q270HH MP270KM Q270HH MP270KM 80 Q280 MP280 Q280H MP280KH Q280HH MP280KM Q280HH MP280KM 90 Q290 MP290 Q290H MP290KH Q290HH MP290KM Q290HH MP290KM Q2 MP2 Q2H MP2KH Q2HH MP2KM Q2HH MP2KM HQS2H HQS2H 0 Q20 MP20 Q20H MP20KH Q20HH MP20KM Q20HH MP20KM 25 Q225 MP225 Q225H MP225KH Q225HH MP225KM Q225HH MP225KM HQS225H HQS225H For use in Amp, 3 phase output WML meter stacks only 60 Q360 MP360 Q360H MP360KH Q360HH MP360KM Q360HH MP360KM 70 Q370 MP370 Q370H MP370KH Q370HH MP370KM Q370HH MP370KM 80 Q380 MP380 Q380H MP380KH Q380HH MP380KM Q380HH MP380KM 90 Q390 MP390 Q390H MP390KH Q390HH MP390KM Q390HH MP390KM Q3 MP3 Q3H MP3KH Q3HH MP3KM Q3HH MP3KM For use in 225 Amp single phase output WMM, WML, WMT meter stacks Meter Center Tenant Panel Breakers Type QJ2 Type MQ Type QJH2 Type MQH Type QJ2H Type MQL Type HQJ2H Type QS (Use QS) Type QSH (Use QSH) Type QSHH (Use QSHH) Type HQS (Use HQS) Type HQSH (Use HQSH) QS2 QS2 QS2H QS2H QSH2 QSH2 QS2HH QS2HH HQS2H HQS2H 25 QS225 QS225 QS225H QS225H QSH225 QSH225 QS225HH QS225HH HQS225H HQS225H 50 QS250 QS250 QS250H QS250H QSH250 QSH250 QS250HH QS250HH HQS250H HQS250H 75 QS275 QS275 QS275H QS275H QSH275 QSH275 QS275HH QS275HH HQS275H HQS275H 200 QS2200 QS2200 QS2200H QS2200H QSH2200 QSH2200 QS2200HH QS2200HH HQS2200H HQS2200H 225 QS2225 QS2225 QS2225H QS2225H QSH2225 QSH2225 QS2225HH QS2225HH HQS2225H HQS2225H For use in 225 Amp 3phase output WML & WMT meter stacks only HQJ2H Type HQJ2H Type HQJ2H Type 60 QJ23B060 MQJ360 QJH23B060 MQJ360KH QJ23B060H MQJ360KL 70 QJ23B070 MQJ370 QJH23B070 MQJ370KH QJ23B070H MQJ370KL 80 QJ23B080 MQJ380 QJH23B080 MQJ380KH QJ23B080H MQJ380KL 90 QJ23B090 MQJ390 QJH23B090 MQJ390KH QJ23B090H MQJ390KL QJ23B MQJ3 QJH23B MQJ3KH QJ23BH MQJ3KL 0 QJ23B0 MQJ30 QJH23B0 MQJ30KH QJ23B0H MQJ30KL 25 QJ23B25 MQJ325 QJH23B25 MQJ325KH QJ23B25H MQJ325KL 50 QJ23B50 MQJ350 QJH23B50 MQJ350KH QJ23B50H MQJ350KL HQJ23B50H HQJ23B50H HQJ23B50H HQJ23B50H 75 QJ23B75 MQJ375 QJH23B75 MQJ375KH QJ23B75H MQJ375KL 200 QJ23B200 MQJ3200 QJH23B200 MQJ3200KH QJ23B200H MQJ3200KL HQJ23B200H HQJ23B200H HQJ23B200H HQJ23B200H 225 QJ23B225 MQJ3225 QJH23B225 MQJ3225KH QJ23B225H MQJ3225KL HQJ23B225H HQJ23B225H HQJ23B225H HQJ23B225H HQSH breakers require the use of 225 Amp WMM meter stacks. HQJ2H breakers require the use of 225 Amp 3phase WML meter stacks. QS series rates with Murray circuit breakers. Product Category RESI SPEEDFAX 20 Product Catalog

5 7 The term Series Connected Short Circuit Rating refers to the application of series circuit breakers in a combination that allows downstream breakers to have lower individual interrupting ratings than the available fault current. 240V Series Ratings UL Series Connected Rating 22,000 Main Breaker Maximum Type Amperes QPH, BQH, BLH QPPH 70 (P) 25 (2P) (3P) 225 (2P) QPMH 200 (2P) QJH2 225 (2 & 3P) 42,000 QJ2H 225 (2 & 3P) 65,000 HQP, HBQ, HBL HQPP ED4, ED6 70 (P) 25 (2P) (3P) 225 (2P) Branch Breaker Type This is permitted as long as the series combination has been tested and certified by UL. The tables on these pages list specific main and branch breaker combinations that may be used for the short circuit interrupting ratings shown. Number of Poles Voltage Amperes 20/ QP, BQ, BL QE, BLE, QPF, BLF, 2 20/ QAF, BAF QE, BLE, BE, QPF, BQF, BLF, QAF, BAF QT, 2 20/ QG, BG, 2 20/ / QP, BQ, BL 2 20/ QE, BLE, BE, QPF, BQF, BLF, QAF, BAF QE, BLE, BE, QPF, 2 20/ BLF, QAF, BAF QPP 2 20/ QT, 2 20/ / / QP 20/ / QE, QPF, QAF, BAF QT 2 20/ / QP, BQ, BL QPF, BQF, BLF, BG, BLG, QE, BE, BLE, QAF, BAF QPF, BLF, BG, BLG, QE, 2 20/ BE, BLE, QAF, BAF QT, 2 20/240 5, 20, 40 20/ QP, BQ, BL 2 20/ / QPH, BQH, BLH 2 20/ QJH2 2, / QP, BQ, BL, QPH, BQH, BLH 20/ QPF, BQF, BLF, BE, QPHF, BQHF, BLHF, QEH, BLEH, QE, BLE, QAFH, BAFH, QAF, BAF QEH, BLEH, QE, QPHF, BLHF, BLE, QPF, BLF, 2 20/ QAFH, BAFH, QAF, BAF QT, 2 20/ QG, BG, 2 20/ QP, BQ, BL, QPH, BQH, BLH 20/ / QPF, BQF, BLF, QPHF, BQHF, BLHF, QEH, BLEH, QE, BLE, BE, 20/ QAFH, BAFH, QAF, BAF QEH, BLEH, QE, QPHF, BLHF, BLE, QPF, BLF, 2 20/ QAFH, BAFH, QAF, BAF QT, QPPH, QPP 2 20/ (P) QP, BQ, BL, QPH, 25 (2 & 3P) BQH, BLH 20/ V Series Ratings (Continued) UL Series Connected Rating Main Breaker Type ED4, ED6 (Cont.) FD6A, FXD6A 65,000 MD6, MXD6, (Continued) ND6, NXD6, PD6, PXD6, RD6, RXD6 No substitutions are permitted. All combinations shown have been tested and are UL Listed. This information is provided as a reference tool only. For verification of specific combination ratings consult the UL Recognized Components Directory. Maximum Amperes 250 (2 & 3P) JXD2A, JD6A, 600 JXD6A, (2 & 3P) LD6A, LXD6A HJD6A, HJXD6A, HLD6A, HLXD6A, 2000 HMD6, HMXD6, (2 & 3P) HND6, HNXD6, HPD6, HPXD6, HRD6, HRXD6 SJD6A, SLD6A, SMD6, SND6, SPD6 NDGA NFGA 600 (2 & 3P) 2000 (2 & 3P) (2P, 3P) (2P, 3P) NJGA / NJJA (2P, 3P) NLGA NMG NNG NPG (2P, 3P) (2P, 3P) (2P, 3P) (2P, 3P) Branch Breaker Type Number of Poles Voltage Amperes QPHF, BQHF, BLHF, QPF, BQF, BLF, QE, QEH, BLEH, BE, BLE, QAFH, BAFH, QAF, BAF QEH, BLEH, QE, QPHF, BLHF, BLE, QPF, BLF, QAFH, 2 20/ BAFH, QAF, BAF ED2, 2, 3 20/240 5 QT, 2 20/ QP, BQ, BL, QPH, BQH, BLH 20/ / QPF, QPHF, BLF, BLHF, QAF, QAFH,, 2 20/ BAF, BAFH QJ2H, QJ2, QJH2 2, QPPH 2 20/ / QPH, BQH, BLH 2 20/ QJ2H, QJH2 2, QPH QPH, BQH, BLH QPH, BQH, BLH 20/ / / / / / / QPH, BQH, BLH 2 20/ / QPH, BQH, BLH 2 20/ / QPH, BQH, BLH 2 20/ QN, QNH 2 20/ QNR, QNRH 2 20/ / QPH, BQH, BLH 2 20/ QN, QNH 2 20/ QNR, QNRH 2 20/ / QPH, BQH, BLH 2 20/ QN, QNH 2 20/ QNR, QNRH 2 20/ / QPH, BQH, BLH 2 20/ QN, QNH 2 20/ QNR, QNRH 2 20/ / QPH, BQH, BLH 2 20/ QN, QNH 2 20/ QNR, QNRH 2 20/ SPEEDFAX 20 Product Catalog

6 Main Breaker/Convertible Load Centers Aluminum Bus 270 Circuits / 225 Amperes 60/75 C Rated 22,000A IR Branch Circuits Indoor Enclosure NEMA Type Outdoor Enclosure NEMA Type 3R Amp Rating No. of Spaces No. of Circuits Catalog Number Enclosure Height (inches) Catalog Number 2 24 S224B 8 SW224B S624B 2 SW624B S2020B 24 SW2020B S2024B S3030B S2424B S3030B S630B S2030B S2430B S3030B S2040B SW2040B S2440B S3040B SW3040B S4040B SW4040B S4260B SW4260B S5470B Enclosure Height (inches) Main Lug/Nonconvertible Load Centers Aluminum Bus 270 Circuits / 225 Amperes 60/75 Rated,000A IR Branch Circuits Indoor Enclosure NEMA Type Outdoor Enclosure NEMA Type 3R Amp Rating No. of Spaces No. of Circuits Catalog Number Enclosure Height (inches) Catalog Number S22L25 8 SW22L S224L25 8 SW224L S624L25 2 SW624L S2020L S2020L25G S2024L S2024L25G S2424L25 24 SW2424L Tenant Panels 24 S2424L25G S2440L S3040L25 30 SW3040L S3040L25G S4040L S2030L50 24 SW2030L S224L200 2 SW224L S2040L SW2040L S2440L S3030L S3040L SW3040L S3054L SW3054L S4040L SW4040L SW224L S4260L SW4260L S5470L Enclosure Height (inches) Suitable for use as service equipment. May be installed on higher rated systems when protected by a circuit breaker with a higher AIR rating. Indoor enclosures are 4 /4" wide by 3 7/8" deep. Outdoor enclosures are 4 /2" wide by 4 /4" deep. Suitable for use as service entrance equipment when not more than six main disconnecting means are provided. See article of the NEC. ES Series single phase skus with a "G" suffix have ground bar included (factory installed). SPEEDFAX 20 Product Catalog Product Category RESI

7 Load Center Breakers Type QP Type QPH Type HQP Continuous Current 0,000A IR 22,000A IR 65,000A IR 40 C Catalog Number Catalog Number Catalog Number Pole PlugIn (20V ) 0 Q0 5 Q5 Q5H Q5HH 20 Q20 Q20H Q20HH 25 Q25 Q25H Q25HH 30 Q30 Q30H Q30HH 35 Q35 Q35H Q35HH 40 Q40 Q40H Q40HH 45 Q45 Q45H Q45HH 50 Q50 Q50H Q50HH 60 Q60 Q60H Q60HH 70 Q70 Q70H Q70HH 2Pole PlugIn (CommonTrip 20/240V ) 0 Q20 5 Q25 Q25H Q25HH 20 Q220 Q220H Q220HH 25 Q225 Q225H Q225HH 30 Q230 Q230H Q230HH 35 Q235 Q235H Q235HH 40 Q240 Q240H Q240HH 45 Q245 Q245H Q245HH 50 Q250 Q250H Q250HH 60 Q260 Q260H Q260HH 70 Q270 Q270H Q270HH 80 Q280 Q280H Q280HH 90 Q290 Q290H Q290HH Q2 Q2H Q2HH 0 Q20 Q20H Q20HH 25 Q225 Q225H Q225HH 2Pole PlugIn (CommonTrip 240V ) 5 Q25R 20 Q220R 30 Q230R 40 Q240R 50 Q250R 60 Q260R 70 Q270R Q2R 3Pole PlugIn (CommonTrip 240V ) 5 Q35 Q35H Q35HH 20 Q320 Q320H Q320HH 25 Q325 Q325H Q325HH 30 Q330 Q330H Q330HH 35 Q335 Q335H Q335HH 40 Q340 Q340H Q340HH 45 Q345 Q345H Q345HH 50 Q350 Q350H Q350HH 60 Q360 Q360H Q360HH 70 Q370 Q370H Q370HH 80 Q380 Q380H Q380HH 90 Q390 Q390H Q390HH Q3 Q3H Q3HH QP / QPH / HQP Internal Accessories Control Voltage Catalog Number Field/Factory Installed 20V Shunt Trip add suffix 00S0 Factory 24V Shunt Trip add suffix 00S07 Factory 20V Auxiliary Switch add suffix 0 Factory Modifications Description Catalog Number 400 Hz Calibration add suffix Y Marine 50 C Ambient Calibration add suffix M Fungus Proofing add suffix F For external accessories please refer to page 42. Built to order. Allow 23 weeks for delivery. UL Listed for use with 60/75 wire through 25 amps, HR rated. A and B contacts. UL Listed for frequent switching applications (SWD). 20V Fluorescent Lighting. UL Listed for use on 3phase grounded B systems 0,000 for this application. Shipped 2 per sleeve. Shipped 6 per sleeve. Shipped 4 per sleeve. UL Listed 5 KA IR. Type QP, UL listed for 6 AWG conductors and multiple wires. SPEEDFAX 20 Product Catalog Product Category RESI

8 & 2 Pole Combination Type ArcFault Circuit Interrupters Plugin and Bolton Data Sheet Pole Plugin ArcFault Circuit Interrupters pole 2pole Features Available in & 2 Pole, 5A & 20A New and improved electronics /4 more wiring bend space than our previous design Both lugs at the same angle for easier wiring Plugin or bolton branch circuit breakers for Siemens single phase load centers or panelboards LED trip indicator a Siemens exclusive! Available with interrupting rating of 0kA, 22kA or 65kA UL Listed Ratings: HR SWD 20 Volts Wire range: #4 #8 AWG Cu #2 #8 AWG Al Torque rating: 25 lb. in. Catalog number Ampere rating QA5AFC 5 0kA QA20AFC 20 0kA QA5AFCH 5 22kA QA20AFCH 20 22kA QA5AFCHH 5 65kA QA20AFCHH 20 65kA Pole Bolton ArcFault Circuit Interrupters Catalog number Ampere rating BA5AFC 5 0kA BA20AFC 20 0kA BA5AFCH 5 22kA BA20AFCH 20 22kA BA5AFCHH 5 65kA BA20AFCHH 20 65kA 2Pole Plugin ArcFault Circuit Interrupters Catalog number Ampere rating Q25AFC 5 0kA Q220AFC 20 0kA Q25AFCH 5 22kA Q220AFCH 20 22kA 2Pole Bolton ArcFault Circuit Interrupters Catalog number Ampere rating B25AFC 5 0kA B220AFC 20 0kA B25AFCH 5 22kA B220AFCH 20 22kA Interrupting rating Interrupting rating Interrupting rating Interrupting rating UL type QAF2 QAFH2 HQAF2 UL type BAF2 BAF2H HBAF2 UL type QAF QAFH UL type BAF BAFH

9 500 Ocean Meter Centers Electrical Submittals

10 s DRAWING TRANSMITTAL JOB NAME: Revised Ocean Submittal 500 Package mellbx000_ _02_00_o00 CONTENTS: Misc Other (Busway, Meters etc.) Meter Centers SECTION These drawings are for: Approval Record Sparky ENGINEER: SGM Engineers Inc. CONTRTOR: Islands Mechanical DISTRIBUTOR: World C Electric Supply : 0/9/205 08/6/2004 Want to B Electric SUBMITTED BY: Your Brian Name Mello Siemens Energy & Automation Western NW Freeway Way, #950 Suite Houston Jacksonville, TX FL Phone: (904) (73) Fax: (73) Other (Busway, Meters etc.) Misc

11 Contractorfocused features, robust quality, dependable service, and exclusive products define Siemens Power Mod. The new standard in multi family metering. QuickSystem showcases the key strengths of Power Mod through five labor saving features: 2 QuickConnect A Siemens exclusive feature, QuickConnect reduces bussing connections from many to one ensuring a single reliable connection instead of multiple connections. Siemens exclusive feature QuickTorque QuickTorque eliminates the need for time consuming torque readings. This breakaway nut provides a visual indicator of torque for the QuickConnect. When tightened, the outer head twists off at the proper torque for connection, leaving a single nut for future maintenance. QuickBolt A Siemens exclusive feature, QuickBolt eliminates the requirement to line up mechanical connections instead bolts remain retracted until the openings line up allowing the bolts to protrude through automatically. Springs push the bolts through and provide positive pressure to keep bolts in place while wingnuts are attached and tightened. Siemens exclusive feature QuickRoll A Siemens exclusive feature, QuickRoll eliminates typical metal brackets for mounting modules on the wall. Instead of metal scraping metal, QuickRoll allows the module to glide down the mounting rail via a durable nylon wheel inside a mounting bracket. Siemens exclusive feature QuickPhase Each individual meter position can be phased independently according to the users needs. QuickPhase allows the user the ultimate flexibility to adjust to each individual application. QuickOption Unique to the industry, QuickOption provides the ultimate flexibility in multifamily metering installations. QuickOption enables contractors to meet local specifications and Buy American/ARRA requirements. Custom colors and factory installed options meet needs in virtually every application. Visit COMPAS for more details. SPEEDFAX 20 Product Catalog

12 Siemens Modular Metering includes an assortment of module types that can be configured to meet a wide range of residential and commercial group metering applications. Siemens modular metering provides for single phase, three wire, 20/240V ; three phase, four wire 20/208Y applications, and three phase in/out, 240 Volt max delta systems. The cross bus that connects devices is aluminum and has a 200 Amp continuous current rating. A typical application requires a main device module and one or more residential or commercial meter stacks. Depending on the application additional modules such as pullbox, tap box, or a spacer may be required. QuickConnect The timesaving QuickConnect (QC) provides a single connection for phase, neutral, and ground all tightened by a single nut that is externally accessible. Beveled edges on the QC allow for easy positioning of the joint. Factory installed QuickBolt spring loaded bolts are located just above and below the QC opening to compress the surrounding gaskets together to form a watertight seal. For extra stability additional nuts and bolts above and below QuickBolts are included as a means of physically joining the meter stacks together both above and below the QC opening. 2 Bus Construction Unmetered bus is surrounded by a barrier and all inaccessible bus connections are welded for maximum strength. All other connections QuickConnect and meter socket connections, are bolted and accessible. Siemens exclusive feature Neutral & Ground Provisions WMM Module Neutral & Ground Provisions are located on the bottom end of the meter modules. All grounds and neutrals may be relocated to the top of the enclosure if a topexit is needed. Each meter module has halfshears to help locate a fieldcut knockout if a top exit is preferred Tenant Breaker Provisions Each 225 Amp meter socket has a provision for a 2pole 225A max plugin type QS circuit breaker. The compact QS breaker fits in two inches and reduces enclosure size limited total mounting space required. Single right hand bend wiring saves time and wire. Insert a 25A QP into a 225 Amp QS slot without conversion kits or filler plates. Generous gutter space allows for wiring for top, bottom, or back of the meter module. Each meter cover is embossed to provide a location for the unit (apartment) number. WMM Module factory phasing is as follows: 2 Gang:, 3 Gang:,, CA 4 Gang:,, CA, 5 Gang:,, CA,, 6 Gang:,, CA,,, CA Any position can be adjusted to any phase. SPEEDFAX 20 Product Catalog

13 Siemens Power Mod offers a wide array of modules to meet the needs of almost any 240V application. Modules are grouped and categorized by function and type to facilitate the selection and ordering process. The basic modules are 2 Standard Breaker Modules (type WB) These modules are designed for line and load side applications ranging from 200 to 2000 Amps at 240V Max. For 200 Amp and below modules compression lug landing pads can be field installed and devices are rated for overhead and underground feed Amp models feature dedicated feed to minimize width and come with factory installed studs to which mechanical or compression lugs can be installed. A wide variety of lug options for AL and CU wire are available to help minimize cost and customize the module to your specifications. All modules in this family feature the four most basic QuickSystem features: QuickConnect, QuickBolt, QuickRoll, and QuickTorque. EUSERCCompliant BreakerPullbox Combination Modules (type WEB) These modules are designed for 240V Max line side, bottom feed applications, up to 200 Amps, in those areas that subscribe to the EUSERC standard, require compression lugs, or require separate compartments for the breaker and line side terminals. NEMA II stud pattern bolts are standard on every unit enabling compression or mechanical lug use. Each module features a removable ground trough to facilitate pulling the grounding conductor through the pull section. Multiple ground lugs are included with every device. All modules in this family feature the four most basic QuickSystem features: QuickConnect, QuickBolt, QuickRoll, and QuickTorque. Standard Switch Modules (type WS) Switch modules are designed for line and load side applications ranging from 400 to 200 Amps at 240V Max. For modules at 800 Amps and below NEMA II stud pattern bolts are factory installed enabling a wide variety of compression and mechanical lug options Amp modules feature the exclusive invertibility feature allowing the user to simply rotate the enclosure to accommodate top or bottom feed. A wide variety of lug options for AL and CU wire are available to help minimize cost and customize the module to your specifications. All modules in this family feature the four most basic QuickSystem features: QuickConnect, QuickBolt, QuickRoll, and QuickTorque. Class T fuse provisions are standard. EUSERCCompliant SwitchPullbox Combination Modules (type WES) These modules are designed for 240V max line side, bottom feed applications, up to 200 Amps, in those areas that subscribe to the EUSERC standard or, require compression lugs. NEMA II stud pattern bolts are standard on every unit enabling compression or mechanical lug use. Each module features a removable ground trough to facilitate pulling the grounding conductor through the pull section. Multiple ground lugs are included with every device. All modules in this family feature the four most basic QuickSystem features: QuickConnect, QuickBolt, QuickRoll, and QuickTorque. Class T fuse provisions are standard. Standard Tap Box Modules (type WTB) Tap box modules are designed for line side main lug only or load side remote feed applications ranging from Amps at 240V. NEMA II stud pattern bolts are factory installed enabling a wide variety of compression and mechanical lug options. All modules in this family feature the exclusive invertibility feature allowing the user to simply rotate the enclosure to accommodate top or bottom feed. A wide variety of lug options for AL and CU wire are available to help minimize cost and customize the module to your specifications. All modules in this family feature the four most basic QuickSystem features: QuickConnect, QuickBolt, QuickRoll, and QuickTorque. SPEEDFAX 20 Product Catalog

14 EUSERCCompliant TapboxPullbox Combination Modules (type WET) These modules are designed for main lug only 240V Max line side, bottom feed applications, up to 200 Amps, in those areas that subscribe to the EUSERC standard, require compression lugs, or require more wire bend space than a standard tap box. NEMA II stud pattern bolts are standard on every unit enabling compression or mechanical lug use. All modules in this family feature the four most basic QuickSystem features: QuickConnect, QuickBolt, QuickRoll, and QuickTorque. Residential Meter Stacks (type WMM) Residential stack modules are available in 25 Amp and 225 Amp per position modules. Two through six position devices in 25 and 225 Amp are available in ring, ringless with and without horn bypass. Modules with three phase through bus have the QuickPhase feature which enables field phasing per position allowing the user to customize the stack to their specific needs. 225 Amp modules use the new QS type breaker which eliminates multiple bends in tenant service conductors and allows for 25 Amp conversion without the need for costly and labor intensive conversion kits. All modules in this family feature the complete QuickSystem feature set: QuickConnect, QuickBolt, QuickRoll, QuickPhase and QuickTorque. 2 Commercial Meter Stacks with Lever Bypass (type WML) Lever bypass commercial meter stacks are available with 240V max single and three phase tenant main provisions. This family offers Amp with three phase tenant mains with up to four positions, 225 Amp with single and three phase tenant mains with up to four positions, and 320 Amp with single and three phase tenant mains up to two positions. Commercial type WML stacks use the Landis & Gyr type HQ lever bypass which has led the industry for forty years in quality and performance. Stacks with single phase 225 Amp provisions can be converted to 25 Amp without the need for costly and labor intensive conversion kits. All modules in this family feature the four basic QuickSystem features: QuickConnect, QuickBolt, QuickRoll, and QuickTorque. EUSERC Compliant Commercial Meter Stacks with Test Block Bypass (type WMT) Test block bypass commercial meter stacks are EUSERC compliant and are available with single phase and three phase output tenant main provisions. This family offers 225 Amp tenant mains with single and three out put with up to three positions. Stacks with single phase 225 Amp provisions can be converted to 25 Amp without the need for costly and labor intensive conversion kits. All modules in this family feature the fourbasic QuickSystem features: QuickConnect, QuickBolt, QuickRoll, and QuickTorque. Commercial Meter Stacks with K Base Meter Sockets (type WMK) KBase is a bolt in meter socket designed and provided exclusively by Landis & Gyr. Utility acceptance varies so please check for approval prior to using one of these devices. KBase commercial meter stacks are available with 240V max single and three phase tenant main provisions. Single phase in and out devices utilize the K4 meter socket. Three phase in and single phase out devices use the K5 meter socket and three phase in with three phase out utilize the K7 meter socket. All devices are offered in one position 400 and 600 Amp configurations. The K7 modules are offered with two positions at 400 Amps per position. All modules in this family feature the four basic QuickSystem features: QuickConnect, QuickBolt, QuickRoll, and QuickTorque. Accessories The Power Mod family offers a wide variety of accessories to customize the products to your particular application. This family includes: Spacers: used to put distance between a main and stack where required or just to extend the length of the lineup Elbows: NEMA rated devices designed to turn a lineup around an inside corner Pullboxes: EUSERC compliant underground pull section for use with standard breaker and switch units Lugs: the widest array of lug options in the industry focusing on offering the most economical solution for your application Misc: field installable 5th jaw kits, hubs, replacement parts SPEEDFAX 20 Product Catalog

15 The service feed for a Modular Metering configuration can be on the end of the configuration or in the middle. Here are a few configuration issues to keep in mind. 2 Configurations are limited by the continuous current ratings for the main device and the cross bus. All cross buses are aluminum with 200 Amp continuous current rating. For center fed applications, the total current in the main device may exceed 200 Amps if the main device is rated accordingly, but the cross bus current on either side of the main device cannot exceed 200 Amps. All meter stack horizontal bussing must match the output (three phase or single phase) of the main disconnect module. Each meter stack comes with a QuickConnectTM and a mounting rail. A QuickConnect is needed for each cross bus connection. Pullboxes have provisions for field installed lugs for incoming and outgoing conductors. These modules should be used for underground service feeds when inspecting authorities require the service to be split. Pullboxes do not have horizontal cross bus. If a connection to cross bus is needed a tap box (type WTB, WET) should be used. 200 to200 Amp standard breaker modules accept combination feed allowing service conductors to enter the top or bottom of the enclosure. 600 to 2000 Amp standard breaker modules have dedicated top or bottom feed. 400 to 800 Amp switch modules are invertible for top or bottom feed. 200 Amp switches are bottom feed only. All standard tapboxes are invertible for top or bottom feed. Invertible units come with two sets of two QuickBoltsTM on both sides of the unit. The QuickBolts on the left side must be removed by taking off two mounting screws on each QuickBolt assembly. Utilities have varying requirements for equipment height, cover types, and bypass types. Therefore, utility acceptance should be obtained prior to installation of any modules. Order a circuit breaker tenant main for each meter position. Circuit breakers must be single phase or three phase to match the output of the meter stack. Refer to the Siemens Speedfax catalog for circuit breaker series rating information. Standard tapboxes and circuit breakers (type WTB, WB) may be used as a service entrance module or a load side feed for remote equipment. An additional QuickConnect must be ordered when using these devices on the load side to feed remote equipment. A spacer is commonly required between a meter stack and the main disconnect module (or tapbox) for a EUSERC installation. A spacer can also be used to extend the length of the lineup when needed. Tapboxes provide a direct connection to the cross bus and do not provide any overcurrent protection. Tapboxes should neverbe used to feed other main devices (WS, WB, WES, WEB) as this would bypass the overcurrent protection. SPEEDFAX 20 Product Catalog

16 Configuration Examples: The following illustration shows a few configuration examples. Other configurations are also possible. For simplicity, only one or two meters stacks are shown for each configuration, but additional meter stacks can be added as long as the cross bus and main device specifications are not exceeded. Incoming Service Meter Stack Incoming Service Meter Stack Incoming Service Meter Stack 2 Busway Tap Stack Spacer (when needed) Main Breaker or Fusible Switch Main Breaker or Fusible Switch Requires an additional QuickConnect Main Breaker or Fusible Switch Requires an additional QuickConnect Meter Stack Meter Stack Incoming Service Main Breaker 600/2000 (Centerfed configurations are used when the required current exceeds 200 Amps.) SPEEDFAX 20 Product Catalog

17

18

19

20

21

22 VIEW SHOWN WITHOUT COVER (6) #42/0 NEUTRAL LUGS REMOVLE BK PLATE WITH (6), /4, /2, 2" KOs SECTION THRU SPRINGLOADED STUDS #032 x 7/8 SCREWS ENCLOSURE WALL SPRING LOADED STUDS SEE DETAIL (7) #42/0 GROUND LUGS (6) KOs, /4, /2, 2" 25/32 36" TO BOTTOM OF QUICK ROLL BRKET Catalog Numbers, Features and Ratings MAIN BUS RATING: 200 AMPS, 240V MAX. METER SOCKET RATING: 25 AMPS CONTINUOUS 65,000 AIC RATING MAX., 25 AMPS MAX. BRANCH RATING 3 PHASE INPUT / PHASE OUTPUT TYPE 3R OUTDOOR ENCLOSURE MOUNTING RAILS AND ADJUSTLE BRKETS FOR SECURE MOUNTING Branch Rating Meter Positions Cover Horn Type 5th Jaw Horn Bypass Catalog No. Main Bus WMM6225J 3 Phase 25A Max. 6 Ring Installed WMM6225RJ 3 Phase 25A Max. 6 Ringless Installed WMM6225RJB 3 Phase 25A Max. 6 Ringless Installed Installed FOR USE WITH: Module Description Main Breakers Switches Tap/Terminal Boxes Pull Boxes Meter Module Extension Box Bussed Elbow Connect Modules Using: QuickConnect Single Bolt Joint PHASE BUS NUTS BUS A BUS B Additional Modules Siemens Series# (W)MC, WB, WEB WMP, WMS, WS, WES WMTB, WTB, WET WMMB, WPB, WAPB WMM, WxMM, WMT, WML, WMK WMEX, WSP (W)BE Catalog Number / Torque QC4, Torque lbin (3536 ft.lb.) SBJ4, Torque lbin (3540 ft.lb.) Rephasing Instructions BUS C BUS A BUS B LINE BUS STRAP Murray Series# DB_W DPT_W, DT_W DTB_W DPB_W DG_W, DC_W, DL_W DS DL Factory installed phasing is,,,,, and top to bottom. Each meter socket can be phased,, or by repositioning line bus straps. If a different phase arrangement is needed, loosen hex nuts and reconnect one or both line bus straps, then retighten the hex nuts to 6065 lb.in. Tighten hex nut at meter socket first, then tighten hex nut on vertical phase bus. BUS C BUS A BUS B BUS C Accessories Description Horn ByPass Mod End Closure Plate 5th Jaw Mod Meter Cover Plate Meter Socket 25A Breaker Mounting Meter Cover, Ring Type Meter Cover, Ringless Parts Kit Load Cover Screws Bottom Pull Cover Mounting Rail Mounting Clip Schematic A B C Equip. Grd. Catalog No. ECMFH WMEP ECMF5 ECCP3 ECMFS ECMFBM ECMFMC ECMFMCR ECMFPK ECMFCS ECMFC MMRAIL MMCLIP ECMFPS Quick Phase Strap Breaker Cover Repl. EC Mounting Tabs (2) ECMFT Ground/Ntl Bar Kit ECMFGN25 Ringless Conversion Kit ECMMRLCK Back Rail/Clip ECMFWLCLIP Wall Mounting Rail (60") MMZR60 QP Breaker Retainer ECMBR2 KO Plate with Knockouts ECMMKOP KO Plate w/o Knockouts ECMMNKOP METER SOCKET NUTS METER STRAP METER BLOCK METER BLOCK METER BLOCK CONNECTION CONNECTION CONNECTION ENLARGED SOCKET DETAIL 243/8 TO CROSS BUS CENTER A N B C A N B C TOP VIEW (6) CENTER PUNCH LOCATORS HORN BYPASS BARREL LOCK PROVISIONS 5th JAW CAN BE RELOCATED TO 6 O'CLOCK POSITION WMM6225RJB SHOWN Size B PowerMod Meter Stack Catalog Numbers: WMM6225J, WMM6225RJ, WMM6225RJB Dwg. No. FTORY INSTALLED, MOVLE TO TOP POSITION Equip. Grd. 200 Copyright Building Technologies Division 25A_3Ph_6Pos Dwn KAM Date /27/0 DO NOT SCALE DRAWING SHEET OF

23 VIEW SHOWN WITHOUT COVER (5) #42/0 NEUTRAL LUGS REMOVLE BK PLATE WITH (6), /4, /2, 2" KOs SECTION THRU SPRINGLOADED STUDS #032 x 7/8 SCREWS ENCLOSURE WALL SPRING LOADED STUDS SEE DETAIL (6) #42/0 GROUND LUGS (6) KOs, /4, /2, 2" 25/32 Catalog Numbers, Features and Ratings MAIN BUS RATING: 200 AMPS 240V MAX. METER SOCKET RATING: 25 AMPS CONTINUOUS 65,000 AIC RATING MAX., 25 AMPS MAX. BRANCH RATING 3 PHASE INPUT / PHASE OUTPUT TYPE 3R OUTDOOR ENCLOSURE MOUNTING RAILS AND ADJUSTLE BRKETS FOR SECURE MOUNTING Catalog No. Main Bus WMM5225J 3 Phase 25A Max. 5 Ring Installed WMM5225RJ 3 Phase 25A Max. 5 Ringless Installed WMM5225RJB 3 Phase 25A Max. 5 Ringless Installed Installed FOR USE WITH: Module Description Main Breakers Switches Tap/Terminal Boxes Pull Boxes Meter Module Extension Box Bussed Elbow Connect Modules Using: QuickConnect Single Bolt Joint Branch Rating Meter Positions Additional Modules Siemens Series# (W)MC, WB, WEB WMP, WMS, WS, WES WMTB, WTB, WET WMMB, WPB, WAPB WMM, WxMM, WMT, WML, WMK WMEX, WSP (W)BE Catalog Number / Torque QC4, Torque lbin (3536 ft.lb.) SBJ4, Torque lbin (3540 ft.lb.) Rephasing Instructions Cover Horn Type 5th Jaw Horn Bypass Murray Series# DB_W DPT_W, DT_W DTB_W DPB_W DG_W, DC_W, DL_W DS DL Accessories Description Horn ByPass Mod End Closure Plate 5th Jaw Mod Meter Cover Plate Meter Socket 25A Breaker Mounting Meter Cover, Ring Type Meter Cover, Ringless Parts Kit Load Cover Screws Bottom Pull Cover Mounting Rail Mounting Clip Schematic Catalog No. ECMFH WMEP ECMF5 ECCP3 ECMFS ECMFBM ECMFMC ECMFMCR ECMFPK ECMFCS ECMFC MMRAIL MMCLIP ECMFPS Quick Phase Strap Breaker Cover Repl. EC Mounting Tabs (2) ECMFT Ground/Ntl Bar Kit ECMFGN25 Ringless Conversion Kit ECMMRLCK Back Rail/Clip ECMFWLCLIP Wall Mounting Rail (60") MMZR60 QP Breaker Retainer ECMBR2 KO Plate with Knockouts ECMMKOP KO Plate w/o Knockouts ECMMNKOP 36" TO BOTTOM OF QUICK ROLL BRKET Factory installed phasing is,,,, and top to bottom. Each meter socket can be phased,, or by repositioning line bus straps. If a different phase arrangement is needed, loosen hex nuts and reconnect one or both line bus straps, then retighten the hex nuts to 6065 lb.in. Tighten hex nut at meter socket first, then tighten hex nut on vertical phase bus. Equip. Grd. PHASE LINE BUS BUS BUS BUS BUS BUS A B C BUS NUTS BUS BUS BUS BUS A B C A B C A B C STRAP METER SOCKET NUTS METER STRAP METER BLOCK METER BLOCK METER BLOCK CONNECTION CONNECTION CONNECTION 243/8 TO CROSS BUS CENTER ENLARGED SOCKET DETAIL A N B C A N B C TOP VIEW (6) CENTER PUNCH LOCATORS HORN BYPASS BARREL LOCK PROVISIONS 5th JAW CAN BE RELOCATED TO 6 O'CLOCK POSITION WMM5225RJB SHOWN Size B 200 Copyright Building Technologies Division PowerMod Meter Stack Catalog Numbers: WMM5225J, WMM5225RJ, WMM5225RJB Dwg. No. FTORY INSTALLED, MOVLE TO TOP POSITION Equip. Grd. 25A_3Ph_5Pos Dwn KAM Date /27/0 DO NOT SCALE DRAWING SHEET OF

24 VIEW SHOWN WITHOUT COVER (4) #42/0 NEUTRAL LUGS REMOVLE BK PLATE WITH (6), /4, /2, 2" KOs SECTION THRU SPRINGLOADED STUDS #032 x 7/8 SCREWS ENCLOSURE WALL SPRING LOADED STUDS SEE DETAIL (5) #42/0 GROUND LUGS (6) CENTER PUNCH LOCATORS 25/32 (6) KOs, /4, /2, 2" Catalog Numbers, Features and Ratings MAIN BUS RATING: 200 AMPS 240V MAX. METER SOCKET RATING: 25 AMPS CONTINUOUS 65,000 AIC RATING MAX., 25 AMPS MAX. BRANCH RATING 3 PHASE INPUT / PHASE OUTPUT TYPE 3R OUTDOOR ENCLOSURE MOUNTING RAILS AND ADJUSTLE BRKETS FOR SECURE MOUNTING Catalog No. Main Bus WMM4225J 3 Phase 25A Max. 4 Ring Installed WMM4225RJ 3 Phase 25A Max. 4 Ringless Installed WMM4225RJB 3 Phase 25A Max. 4 Ringless Installed Installed FOR USE WITH: Module Description Main Breakers Switches Tap/Terminal Boxes Pull Boxes Meter Module Extension Box Bussed Elbow Connect Modules Using: QuickConnect Single Bolt Joint Branch Rating Meter Positions Additional Modules Siemens Series# (W)MC, WB, WEB WMP, WMS, WS, WES WMTB, WTB, WET WMMB, WPB, WAPB WMM, WxMM, WMT, WML, WMK WMEX, WSP (W)BE Catalog Number / Torque QC4, Torque lbin (3536 ft.lb.) SBJ4, Torque lbin (3540 ft.lb.) Cover Horn Type 5th Jaw Horn Bypass Murray Series# DB_W DPT_W, DT_W DTB_W DPB_W DG_W, DC_W, DL_W DS DL Accessories Description Horn ByPass Mod End Closure Plate 5th Jaw Mod Meter Cover Plate Meter Socket 25A Breaker Mounting Meter Cover, Ring Type Meter Cover, Ringless Parts Kit Load Cover Screws Bottom Pull Cover Mounting Rail Mounting Clip Schematic Catalog No. ECMFH WMEP ECMF5 ECCP3 ECMFS ECMFBM ECMFMC ECMFMCR ECMFPK ECMFCS ECMFC MMRAIL MMCLIP ECMFPS Quick Phase Strap Breaker Cover Repl. EC Mounting Tabs (2) ECMFT Ground/Ntl Bar Kit ECMFGN25 Ringless Conversion Kit ECMMRLCK Back Rail/Clip ECMFWLCLIP Wall Mounting Rail (60") MMZR60 QP Breaker Retainer ECMBR2 KO Plate with Knockouts ECMMKOP KO Plate w/o Knockouts ECMMNKOP 36" TO BOTTOM OF QUICK ROLL BRKET Rephasing Instructions Factory installed phasing is,,, and top to bottom. Each meter socket can be phased,, or by repositioning line bus straps. If a different phase arrangement is needed, loosen hex nuts and reconnect one or both line bus straps, then retighten the hex nuts to 6065 lb.in. Tighten hex nut at meter socket first, then tighten hex nut on vertical phase bus. A B C Equip. Grd. PHASE LINE BUS BUS BUS BUS BUS BUS BUS NUTS BUS BUS BUS BUS A B C A B C A B C STRAP 243/8 TO CROSS BUS CENTER METER SOCKET NUTS METER BLOCK CONNECTION METER BLOCK CONNECTION METER STRAP METER BLOCK CONNECTION A N B C A N B C ENLARGED SOCKET DETAIL Equip. Grd. FTORY INSTALLED, MOVLE TO TOP POSITION WMM4225RJB SHOWN HORN BYPASS BARREL LOCK PROVISIONS 5th JAW CAN BE RELOCATED TO 6 O'CLOCK POSITION Size B 200 Copyright Building Technologies Division PowerMod Meter Stack Catalog Numbers: WMM4225J, WMM4225RJ, WMM4225RJB Dwg. No. 25A_3Ph_4Pos Dwn KAM Date /27/0 DO NOT SCALE DRAWING SHEET OF

25 VIEW SHOWN WITHOUT COVER (3) #42/0 NEUTRAL LUGS REMOVLE BK PLATE WITH (6), /4, /2, 2" KOs SECTION THRU SPRINGLOADED STUDS #032 x 7/8 SCREWS ENCLOSURE WALL SPRING LOADED STUDS SEE DETAIL (4) #42/0 GROUND LUGS (6) CENTER PUNCH LOCATORS 25/32 (6) KOs, /4, /2, 2" 36" TO BOTTOM OF QUICK ROLL BRKET Catalog Numbers, Features and Ratings MAIN BUS RATING: 200 AMPS 240V MAX. METER SOCKET RATING: 25 AMPS CONTINUOUS 65,000 AIC RATING MAX., 25 AMPS MAX. BRANCH RATING 3 PHASE INPUT / PHASE OUTPUT TYPE 3R OUTDOOR ENCLOSURE MOUNTING RAILS AND ADJUSTLE BRKETS FOR SECURE MOUNTING Catalog No. Main Bus WMM3225J 3 Phase 25A Max. 3 Ring Installed WMM3225RJ 3 Phase 25A Max. 3 Ringless Installed WMM3225RJB 3 Phase 25A Max. 3 Ringless Installed Installed FOR USE WITH: Module Description Main Breakers Switches Tap/Terminal Boxes Pull Boxes Meter Module Extension Box Bussed Elbow Connect Modules Using: QuickConnect Single Bolt Joint Branch Rating Meter Positions Additional Modules Siemens Series# (W)MC, WB, WEB WMP, WMS, WS, WES WMTB, WTB, WET WMMB, WPB, WAPB WMM, WxMM, WMT, WML, WMK WMEX, WSP (W)BE Catalog Number / Torque QC4, Torque lbin (3536 ft.lb.) SBJ4, Torque lbin (3540 ft.lb.) Rephasing Instructions Cover Horn Type 5th Jaw Horn Bypass Murray Series# DB_W DPT_W, DT_W DTB_W DPB_W DG_W, DC_W, DL_W DS DL Factory installed phasing is,, and, top to bottom. Each meter socket can be phased,, or by repositioning line bus straps. If a different phase arrangement is needed, loosen hex nuts and reconnect one or both line bus straps, then retighten the hex nuts to 6065 lb.in. Tighten hex nut at meter socket first, then tighten hex nut on vertical phase bus. Accessories Description Horn ByPass Mod End Closure Plate 5th Jaw Mod Meter Cover Plate Meter Socket 25A Breaker Mounting Meter Cover, Ring Type Meter Cover, Ringless Parts Kit Load Cover Screws Bottom Pull Cover Mounting Rail Mounting Clip Schematic A B C Equip. Grd. Catalog No. ECMFH WMEP ECMF5 ECCP3 ECMFS ECMFBM ECMFMC ECMFMCR ECMFPK ECMFCS ECMFC MMRAIL MMCLIP ECMFPS Quick Phase Strap Breaker Cover Repl. EC Mounting Tabs (2) ECMFT Ground/Ntl Bar Kit ECMFGN25 Ringless Conversion Kit ECMMRLCK Back Rail/Clip ECMFWLCLIP Wall Mounting Rail (60") MMZR60 QP Breaker Retainer ECMBR2 KO Plate with Knockouts ECMMKOP KO Plate w/o Knockouts ECMMNKOP PHASE LINE BUS BUS BUS BUS BUS BUS BUS NUTS BUS BUS BUS BUS A B C A B C A B C STRAP 243/8 TO CROSS BUS CENTER METER SOCKET NUTS METER BLOCK CONNECTION METER BLOCK CONNECTION METER STRAP METER BLOCK CONNECTION A N B C A N B C ENLARGED SOCKET DETAIL Equip. Grd. FTORY INSTALLED, MOVLE TO TOP POSITION WMM3225RJB SHOWN HORN BYPASS BARREL LOCK PROVISIONS 5th JAW CAN BE RELOCATED TO 6 O'CLOCK POSITION Size B 200 Copyright Building Technologies Division PowerMod Meter Stack Catalog Numbers: WMM3225J, WMM3225RJ, WMM3225RJB Dwg. No. 25A_3Ph_3Pos Dwn KAM Date /27/0 DO NOT SCALE DRAWING SHEET OF

26 VIEW SHOWN WITHOUT COVER (2) #42/0 NEUTRAL LUGS REMOVLE BK PLATE WITH (6), /4, /2, 2" KOs SECTION THRU SPRINGLOADED STUDS #032 x 7/8 SCREWS ENCLOSURE WALL SPRING LOADED STUDS SEE DETAIL (3) #42/0 GROUND LUGS (6) CENTER PUNCH LOCATORS 25/32 (6) KOs, /4, /2, 2" Catalog Numbers, Features and Ratings MAIN BUS RATING: 200 AMPS 240V MAX. METER SOCKET RATING: 25 AMPS CONTINUOUS 65,000 AIC RATING MAX., 25 AMPS MAX. BRANCH RATING 3 PHASE INPUT / PHASE OUTPUT TYPE 3R OUTDOOR ENCLOSURE MOUNTING RAILS AND ADJUSTLE BRKETS FOR SECURE MOUNTING Catalog No. Main Bus WMM2225J 3 Phase 25A Max. 2 Ring Installed WMM2225RJ 3 Phase 25A Max. 2 Ringless Installed WMM2225RJB 3 Phase 25A Max. 2 Ringless Installed Installed FOR USE WITH: Module Description Main Breakers Switches Tap/Terminal Boxes Pull Boxes Meter Module Extension Box Bussed Elbow Connect Modules Using: QuickConnect Single Bolt Joint Branch Rating Meter Positions Additional Modules Siemens Series# (W)MC, WB, WEB WMP, WMS, WS, WES WMTB, WTB, WET WMMB, WPB, WAPB WMM, WxMM, WMT, WML, WMK WMEX, WSP (W)BE Catalog Number / Torque QC4, Torque lbin (3536 ft.lb.) SBJ4, Torque lbin (3540 ft.lb.) Rephasing Instructions Cover Horn Type 5th Jaw Horn Bypass Murray Series# DB_W DPT_W, DT_W DTB_W DPB_W DG_W, DC_W, DL_W DS DL Accessories Description Horn ByPass Mod End Closure Plate 5th Jaw Mod Meter Cover Plate Meter Socket 25A Breaker Mounting Meter Cover, Ring Type Meter Cover, Ringless Parts Kit Load Cover Screws Bottom Pull Cover Mounting Rail Mounting Clip Schematic Catalog No. ECMFH WMEP ECMF5 ECCP3 ECMFS ECMFBM ECMFMC ECMFMCR ECMFPK ECMFCS ECMFC MMRAIL MMCLIP ECMFPS Quick Phase Strap Breaker Cover Repl. EC Mounting Tabs (2) ECMFT Ground/Ntl Bar Kit ECMFGN25 Ringless Conversion Kit ECMMRLCK Back Rail/Clip ECMFWLCLIP Wall Mounting Rail (60") MMZR60 QP Breaker Retainer ECMBR2 KO Plate with Knockouts ECMMKOP KO Plate w/o Knockouts ECMMNKOP 27" TO BOTTOM OF QUICK ROLL BRKET Factory installed phasing is and top to bottom. Each meter socket can be phased,, or by repositioning line bus straps. If a different phase arrangement is needed, loosen hex nuts and reconnect one or both line bus straps, then retighten the hex nuts to 6065 lb.in. Tighten hex nut at meter socket first, then tighten hex nut on vertical phase bus. A B C Equip. Grd. PHASE LINE BUS BUS BUS BUS BUS BUS BUS NUTS BUS BUS BUS BUS A B C A B C A B C STRAP 53/8 TO CROSS BUS CENTER METER SOCKET NUTS METER BLOCK CONNECTION METER BLOCK CONNECTION METER STRAP METER BLOCK CONNECTION A N B C A N B C ENLARGED SOCKET DETAIL Equip. Grd. FTORY INSTALLED, MOVLE TO TOP POSITION WMM2225RJB SHOWN HORN BYPASS BARREL LOCK PROVISIONS 5th JAW CAN BE RELOCATED TO 6 O'CLOCK POSITION Size B 200 Copyright Building Technologies Division PowerMod Meter Stack Catalog Numbers: WMM2225J, WMM2225RJ, WMM2225RJB Dwg. No. 25A_3Ph_2Pos Dwn KAM Date /27/0 DO NOT SCALE DRAWING SHEET OF

27 Catalog Numbers, Ratings and Features Additional Modules and Accessories Schematic Catalog No. Max. Branch Rating Main Bus, 200A Max. Breaker Type Meter Socket Cover TYPE 3R OUTDOOR ENCLOSURE 208Y/20 VOLTS, 3 PHASE, 4 WIRE 240/20 VOLTS, 3 PHASE, 4 WIRE DELTA 3 PHASE INPUT, 3 PHASE OUTPUT MOUNTING RAILS AND ADJUSTLE BRKETS FOR SECURE MOUNTING Meter Socket Type/ Continuous Rating No. of Jaws Bypass Type WML3400RJ 400A 3 Phase 3 Pole JXD2A Ringless HQ7S / 320A 7 Lever CATALOG NUMBER FTORY INSTALLED BREAKER WML3400RJ 400A ALTERNATE BREAKER AMPERAGES (FTORY INSTALLED) WML3400RJT 200A WML3400RJT2 250A WML3400RJT3 300A WML3400RJT4 350A 33/6 Neutral Lug Wire Range ()or(2) 3/0500 CU ()or(2) 4/0500 AL 229/32 Equip Ground Lug Wire Range (2) #4300 kcmil TYPE "HD" 4" MAX. HUB OPENING FTORY INSTALLED COVER PLATES FOR USE WITH: Module Description Main Breakers Switches Tap/Terminal Boxes Meter Module Extension Box Bussed Elbow Connect Modules Using: QuickConnect Single Bolt Joint Siemens Series# (W)MC, WB, WEB WMP, WMS, WS, WES WMTB, WTB, WET WMM, WxMM, WMT, WML, WMK WMEX BE Catalog Number / Torque QC (ph) or QC4 (3ph) lbin (3536 ft.lb.)torque SBJ (ph) or SBJ4 (3ph) lbin (3540 ft.lb.)torque Murray Series# DB_W DPT_W, DT_W DTB_W DG_W, DC_W, DL_W DS DL Siemens Accessory Hub Cover Plate Type HD Hub 2" Type HD Hub 2/2" Type HD Hub 3" Type HD Hub 3/2" Type HD Hub 4" Catalog No. EC56933S EC56854 EC56855 EC56856 EC56857 EC56858 A N B C Equip. Grd. A NEUTRAL (POTENTIAL JAW) B C HIGH LEG FOR 3Ø, 4 WIRE DELTA SYSTEM A N B C NEUTRAL LUGS GROUND LUGS SPRINGLOADED STUDS SEE DETAIL 5/8 TO BOTTOM OF QUICK ROLL BRKET Enlarged Socket Detail 44 REMOVLE BKPLATE 2, 2/2, 3, 3/2, 4 KO'S (2) PLES /2 & 3/4 KO 263/6 TO CROSS BUS CENTER LANDIS & GYR HQ7S CLAMPJAW LEVER BYPASS BARREL LOCK PROVISIONS 52/32 35/6 2/4 49/32 8/6 27/32 /2, 3/4,, /4 KO 2, 2/2, 3, 3/2, 4 KO'S (2) PLES 65/6 /2 & 3/4 KO #032 x 7/8 SCREWS ENCLOSURE WALL SECTION THRU SPRINGLOADED STUDS 43/6 25/6 49/32 8/6 27/32 7/6 9/6 /2, 3/4,, /4 KO Description: Size B Siemens Energy & Automation, Inc. Residential Products Division PowerMod Modular Metering Lever Bypass Position 400A Tenant 3in3out Commercial Metering Module Dwg. No. WML3400RJ Dwn KAM Date 5/28/09 DO NOT SCALE DRAWING SHEET OF 5

28 Catalog Numbers, Ratings and Features Additional Modules and Accessories Schematic Catalog No. Max. Branch Rating Main Bus, 200A Max. Breaker Type Meter Socket Cover Meter Socket Type/ Continuous Rating No. of Jaws Bypass Type Neutral Lug (Qty) and Wire Range Equip Ground Lug (Qty) and Wire Range WML3225RJ 225A 3 Phase 3 Pole QJ/MQJ Ringless HQ7S / 200A 7 Lever () #4300 kcmil (2) #42/0 AWG TYPE 3R OUTDOOR ENCLOSURE 208Y/20 VOLTS, 3 PHASE, 4 WIRE 240/20 VOLTS, 3 PHASE, 4 WIRE DELTA 3 PHASE INPUT, 3 PHASE OUTPUT MOUNTING RAILS AND ADJUSTLE BRKETS FOR SECURE MOUNTING FOR USE WITH: Module Description Main Breakers Switches Tap/Terminal Boxes Meter Module Extension Box Bussed Elbow Connect Modules Using: QuickConnect Single Bolt Joint Siemens Series# (W)MC, WB, WEB WMP, WMS, WS, WES WMTB, WTB, WET WMM, WxMM, WMT, WML, WMK WMEX, WSP (W)BE Catalog Number / Torque QC (ph) or QC4 (3ph) lbin (3536 ft.lb.)torque SBJ (ph) or SBJ4 (3ph) lbin (3540 ft.lb.)torque Murray Series# DB_W DPT_W, DT_W DTB_W DG_W, DC_W, DL_W DS DL HIGH LEG FOR 3Ø, 4 WIRE DELTA SYSTEM A N B C A B C NEUTRAL (POTENTIAL JAW) A N B C Equip. Grd. NEUTRAL LUGS GROUND LUGS SPRINGLOADED STUDS SEE DETAIL 5/8 TO BOTTOM OF QUICK ROLL BRKET REMOVLE BK PLATE WITH (2), /4, /2, 2 KO'S BARREL LOCK PROVISIONS 73/32 33/6 TO CENTER OF CROSS BUS 273/4 LANDIS & GYR HQ7S CLAMPJAW LEVER BYPASS Enlarged Socket Detail 23/4 25/32 55/32 23/2 #032 x 7/8 SCREWS ENCLOSURE WALL SECTION THRU SPRINGLOADED STUDS 67/6 2/8 2/2 5/6 6/8 4/8 /2, 3/4 KO'S, /4, /2, 2, 2/2 KO'S (4) PLES 9 Description: Size B 200 Copyright Building Technologies Division PowerMod Modular Metering Lever Bypass Position 225A Tenant 3in3out Commercial Metering Module Dwg. No. WML3225RJ Dwn KAM Date /27/0 DO NOT SCALE DRAWING SHEET OF 4

29 74.28 Overall Width Mtr. to Mtr. Ctr. Line (in): 9 Typ. Mtr. to Mtr. Ctr. Line (in): 9 Typ. Grnd. to Top Mtr. (in): 55 Grnd. to Top Mtr (in): 82 Grnd. to Bot. Mtr. (in): 46 Grnd. to Bot. Mtr. (in): THRU BUS PROV Mod.: WMM Cat. Num.: WMM2225RJ Cat. Num.: WMM6225RJ Grnd. Clr. (in):33.65 Grnd. Clr. (in):24.65 GROUND LINE *WARNING: CHECK UTILITY REQUIREMENT BEFORE INSTALLATION METER OVE 78" FROM FLOOR GENERAL INFORMATION: SYSTEM VOLTAGE: 3Ø/4W 208/20V WYE PAINT: ANSI 6 (STD) MINIMUM GROUND CLEARANCE: 2.0 MINIMUM METER SOCKET HEIGHT: 36.8 MAXIMUM METER SOCKET HEIGHT: 8.8 Mtr. to Mtr. Ctr. Line (in): 9 Typ. Grnd. to Top Mtr (in): 82 Grnd. to Bot. Mtr. (in): Cat. Num.: WMM6225RJ Grnd. Clr. (in):24.65 Mtr. to Mtr. Ctr. Line (in): 9 Typ. Mtr. to Mtr. Ctr. Line (in): 9 Typ. Grnd. to Top Mtr (in): 82 Grnd. to Top Mtr (in): 82 Grnd. to Bot. Mtr. (in): 37 Grnd. to Bot. Mtr. (in): Mod.:WB Mod.: WTB Cat. Num.: WMM6225RJ Cat. Num.: WB3800B Cat. Num.: WTB32000BU Cat. Num.: WMM6225RJ Grnd. Clr. (in):24.65 Grnd. Clr. (in): 2.0 Grnd. Clr. (in): 5.03 Grnd. Clr. (in):24.65 JOB Ocean 500 P.O. CUST. WORLD ELECTRIC SUPPLY INC CONTR ISLANDS MECHANICAL CONTRTOR INC CONSLT 0 mellbx NO. REVISIONS DRAWN BY: TIE S.O. Norcross, Georgia BY mellbx ENG. LOC. MFG. LOC. DWG. FILE DESIGNATION METER CENTER A ST FLOOR DWG. NO. mellbx000_ _03_00_o SHEET OF 5 REV.

30 Mtr. to Mtr. Ctr. Line (in): 9 Typ. Grnd. to Top Mtr (in): 82 Grnd. to Bot. Mtr. (in): Cat. Num.: WMM6225RJ Grnd. Clr. (in):24.65 Mtr. to Mtr. Ctr. Line (in): 9 Typ. Grnd. to Top Mtr (in): 82 Grnd. to Bot. Mtr. (in): Cat. Num.: WMM6225RJ Grnd. Clr. (in):24.65 Mtr. to Mtr. Ctr. Line (in): NA Grnd. to Bot. Mtr. (in): Grnd. to Top Mtr. (in): C Mod.:WML Cat. Num.: WML3400RJ Grnd. Clr. (in): JOB Ocean 500 P.O. CUST. WORLD ELECTRIC SUPPLY INC CONTR ISLANDS MECHANICAL CONTRTOR INC CONSLT TIE BY ENG. LOC. DESIGNATION mellbx S.O. Norcross, Georgia MFG. LOC. DWG. NO. DWG. FILE SHEET METER CENTER A ST FLOOR mellbx000_ _03_00_o OF 5 REV.

31 Mod.: WB Mod: WTB JOB Ocean 500 P.O. CUST. WORLD ELECTRIC SUPPLY INC CONTR ISLANDS MECHANICAL CONTRTOR INC CONSLT TIE BY ENG. LOC. DESIGNATION mellbx S.O. Norcross, Georgia MFG. LOC. DWG. NO. DWG. FILE SHEET METER CENTER A ST FLOOR mellbx000_ _03_00_o OF 5 REV.

32 Mod.:WML JOB Ocean 500 P.O. CUST. WORLD ELECTRIC SUPPLY INC CONTR ISLANDS MECHANICAL CONTRTOR INC CONSLT TIE BY ENG. LOC. DESIGNATION mellbx S.O. Norcross, Georgia MFG. LOC. DWG. NO. DWG. FILE SHEET METER CENTER A ST FLOOR mellbx000_ _03_00_o OF 5 REV.

33 JOB Ocean 500 P.O. CUST. WORLD ELECTRIC SUPPLY INC CONTR ISLANDS MECHANICAL CONTRTOR INC CONSLT TIE BY ENG. LOC. DESIGNATION mellbx S.O. Norcross, Georgia MFG. LOC. DWG. NO. DWG. FILE SHEET METER CENTER A ST FLOOR mellbx000_ _03_00_o OF 5 REV.

34 26.63 Overall Width Mtr. to Mtr. Ctr. Line (in): 9 Typ. Mtr. to Mtr. Ctr. Line (in): 9 Typ. Grnd. to Top Mtr. (in): 52 Grnd. to Top Mtr (in): 79 Grnd. to Bot. Mtr. (in): 34 Grnd. to Bot. Mtr. (in): THRU BUS 46.0 Mod.: WMM Cat. Num.: WMM3225RJ Cat. Num.: WMM6225RJ Grnd. Clr. (in):2.62 Grnd. Clr. (in):2.62 GROUND LINE *WARNING: CHECK UTILITY REQUIREMENT BEFORE INSTALLATION METER OVE 78" FROM FLOOR GENERAL INFORMATION: SYSTEM VOLTAGE: 3Ø/4W 208/20V WYE PAINT: ANSI 6 (STD) MINIMUM GROUND CLEARANCE: 2.0 MINIMUM METER SOCKET HEIGHT: MAXIMUM METER SOCKET HEIGHT: Mtr. to Mtr. Ctr. Line (in): 9 Typ. Grnd. to Top Mtr (in): 79 Grnd. to Bot. Mtr. (in): Cat. Num.: WMM6225RJ Grnd. Clr. (in):2.62 Mtr. to Mtr. Ctr. Line (in): 9 Typ. Mtr. to Mtr. Ctr. Line (in): 9 Typ. Mtr. to Mtr. Ctr. Line (in): 9 Typ. Mtr. to Mtr. Ctr. Line (in): 9 Typ. Grnd. to Top Mtr (in): 79 Grnd. to Top Mtr (in): 79 Grnd. to Top Mtr (in): 79 Grnd. to Top Mtr (in): 79 Grnd. to Bot. Mtr. (in): 34 Grnd. to Bot. Mtr. (in): 34 Grnd. to Bot. Mtr. (in): 34 Grnd. to Bot. Mtr. (in): Mod.: WTB Cat. Num.: WMM6225RJ Cat. Num.: WTB32000BU Cat. Num.: WMM6225RJ Cat. Num.: WMM6225RJ Cat. Num.: WMM6225RJ Grnd. Clr. (in):2.62 Grnd. Clr. (in): 2.0 Grnd. Clr. (in):2.62 Grnd. Clr. (in):2.62 Grnd. Clr. (in):2.62 JOB Ocean 500 P.O. CUST. WORLD ELECTRIC SUPPLY INC CONTR ISLANDS MECHANICAL CONTRTOR INC CONSLT 0 mellbx NO. REVISIONS DRAWN BY: TIE S.O. Norcross, Georgia BY mellbx ENG. LOC. MFG. LOC. DWG. FILE DESIGNATION METER CENTER A 4TH FLOOR DWG. NO. mellbx000_ _03_00_o SHEET OF 2 REV.

35 Mod: WTB JOB Ocean 500 P.O. CUST. WORLD ELECTRIC SUPPLY INC CONTR ISLANDS MECHANICAL CONTRTOR INC CONSLT TIE BY ENG. LOC. DESIGNATION mellbx S.O. Norcross, Georgia MFG. LOC. DWG. NO. DWG. FILE SHEET METER CENTER A 4TH FLOOR mellbx000_ _03_00_o OF 2 REV.

36 68.38 Overall Width Mtr. to Mtr. Ctr. Line (in): 9 Typ. Mtr. to Mtr. Ctr. Line (in): 9 Typ. Grnd. to Top Mtr (in): 82 Grnd. to Top Mtr (in): 82 Grnd. to Bot. Mtr. (in): 37 Grnd. to Bot. Mtr. (in): THRU BUS Cat. Num.: WMM6225RJ Cat. Num.: WMM6225RJ Grnd. Clr. (in):24.65 Grnd. Clr. (in):24.65 GROUND LINE *WARNING: CHECK UTILITY REQUIREMENT BEFORE INSTALLATION METER OVE 78" FROM FLOOR GENERAL INFORMATION: SYSTEM VOLTAGE: 3Ø/4W 208/20V WYE PAINT: ANSI 6 (STD) MINIMUM GROUND CLEARANCE: 2.0 MINIMUM METER SOCKET HEIGHT: 36.8 MAXIMUM METER SOCKET HEIGHT: 8.8 Mtr. to Mtr. Ctr. Line (in): 9 Typ. Grnd. to Top Mtr (in): 82 Grnd. to Bot. Mtr. (in): Cat. Num.: WMM6225RJ Grnd. Clr. (in): Mod.:WB Mod.: WTB Cat. Num.: WB3800B Cat. Num.: WTB32000BU Grnd. Clr. (in): 2.0 Grnd. Clr. (in): mellbx NO. REVISIONS DRAWN BY: Mtr. to Mtr. Ctr. Line (in): 9 Typ. Mtr. to Mtr. Ctr. Line (in): 9 Typ. Grnd. to Top Mtr (in): 82 Grnd. to Top Mtr (in): 82 Grnd. to Bot. Mtr. (in): 37 Grnd. to Bot. Mtr. (in): Cat. Num.: WMM6225RJ Cat. Num.: WMM6225RJ Grnd. Clr. (in):24.65 Grnd. Clr. (in):24.65 JOB Ocean 500 P.O. CUST. WORLD ELECTRIC SUPPLY INC CONTR ISLANDS MECHANICAL CONTRTOR INC CONSLT TIE BY ENG. LOC. DESIGNATION mellbx S.O. Norcross, Georgia MFG. LOC. DWG. NO. DWG. FILE SHEET METER CENTER B ST FLOOR mellbx000_ _03_00_o OF 5 REV.

37 Mtr. to Mtr. Ctr. Line (in): 9 Typ. Grnd. to Top Mtr. (in): 72.8 Grnd. to Bot. Mtr (in): Cat. Num.: WMM5225RJ Grnd. Clr. (in):24.65 Mtr. to Mtr. Ctr. Line (in): NA Grnd. to Top Mtr. (in): Grnd. to Bot. Mtr. (in): Mod.:WML Cat. Num.: WML3225RJ Grnd. Clr. (in): C JOB Ocean 500 P.O. CUST. WORLD ELECTRIC SUPPLY INC CONTR ISLANDS MECHANICAL CONTRTOR INC CONSLT TIE BY ENG. LOC. DESIGNATION mellbx S.O. Norcross, Georgia MFG. LOC. DWG. NO. DWG. FILE SHEET METER CENTER B ST FLOOR mellbx000_ _03_00_o OF 5 REV.

38 Mod.: WB Mod: WTB JOB Ocean 500 P.O. CUST. WORLD ELECTRIC SUPPLY INC CONTR ISLANDS MECHANICAL CONTRTOR INC CONSLT TIE BY ENG. LOC. DESIGNATION mellbx S.O. Norcross, Georgia MFG. LOC. DWG. NO. DWG. FILE SHEET METER CENTER B ST FLOOR mellbx000_ _03_00_o OF 5 REV.

39 Mod.:WML JOB Ocean 500 P.O. CUST. WORLD ELECTRIC SUPPLY INC CONTR ISLANDS MECHANICAL CONTRTOR INC CONSLT TIE BY ENG. LOC. DESIGNATION mellbx S.O. Norcross, Georgia MFG. LOC. DWG. NO. DWG. FILE SHEET METER CENTER B ST FLOOR mellbx000_ _03_00_o OF 5 REV.

40 JOB Ocean 500 P.O. CUST. WORLD ELECTRIC SUPPLY INC CONTR ISLANDS MECHANICAL CONTRTOR INC CONSLT TIE BY ENG. LOC. DESIGNATION mellbx S.O. Norcross, Georgia MFG. LOC. DWG. NO. DWG. FILE SHEET METER CENTER B ST FLOOR mellbx000_ _03_00_o OF 5 REV.

41 26.63 Overall Width Mtr. to Mtr. Ctr. Line (in): 9 Typ. Mtr. to Mtr. Ctr. Line (in): 9 Typ. Grnd. to Top Mtr. (in): 52 Grnd. to Top Mtr (in): 79 Grnd. to Bot. Mtr. (in): 34 Grnd. to Bot. Mtr. (in): THRU BUS 46.0 Mod.: WMM Cat. Num.: WMM3225RJ Cat. Num.: WMM6225RJ Grnd. Clr. (in):2.62 Grnd. Clr. (in):2.62 GROUND LINE *WARNING: CHECK UTILITY REQUIREMENT BEFORE INSTALLATION METER OVE 78" FROM FLOOR GENERAL INFORMATION: SYSTEM VOLTAGE: 3Ø/4W 208/20V WYE PAINT: ANSI 6 (STD) MINIMUM GROUND CLEARANCE: 2.0 MINIMUM METER SOCKET HEIGHT: MAXIMUM METER SOCKET HEIGHT: Mtr. to Mtr. Ctr. Line (in): 9 Typ. Grnd. to Top Mtr (in): 79 Grnd. to Bot. Mtr. (in): Cat. Num.: WMM6225RJ Grnd. Clr. (in):2.62 Mtr. to Mtr. Ctr. Line (in): 9 Typ. Mtr. to Mtr. Ctr. Line (in): 9 Typ. Mtr. to Mtr. Ctr. Line (in): 9 Typ. Mtr. to Mtr. Ctr. Line (in): 9 Typ. Grnd. to Top Mtr (in): 79 Grnd. to Top Mtr (in): 79 Grnd. to Top Mtr (in): 79 Grnd. to Top Mtr (in): 79 Grnd. to Bot. Mtr. (in): 34 Grnd. to Bot. Mtr. (in): 34 Grnd. to Bot. Mtr. (in): 34 Grnd. to Bot. Mtr. (in): Mod.: WTB Cat. Num.: WMM6225RJ Cat. Num.: WTB32000BU Cat. Num.: WMM6225RJ Cat. Num.: WMM6225RJ Cat. Num.: WMM6225RJ Grnd. Clr. (in):2.62 Grnd. Clr. (in): 2.0 Grnd. Clr. (in):2.62 Grnd. Clr. (in):2.62 Grnd. Clr. (in):2.62 JOB Ocean 500 P.O. CUST. WORLD ELECTRIC SUPPLY INC CONTR ISLANDS MECHANICAL CONTRTOR INC CONSLT 0 mellbx NO. REVISIONS DRAWN BY: TIE S.O. Norcross, Georgia BY mellbx ENG. LOC. MFG. LOC. DWG. FILE DESIGNATION METER CENTER B 4TH FLOOR DWG. NO. mellbx000_ _03_00_o SHEET OF 2 REV.

42 Mod: WTB JOB Ocean 500 P.O. CUST. WORLD ELECTRIC SUPPLY INC CONTR ISLANDS MECHANICAL CONTRTOR INC CONSLT TIE BY ENG. LOC. DESIGNATION mellbx S.O. Norcross, Georgia MFG. LOC. DWG. NO. DWG. FILE SHEET METER CENTER B 4TH FLOOR mellbx000_ _03_00_o OF 2 REV.

43 27.7 Overall Width Mtr. to Mtr. Ctr. Line (in): 9 Typ. Mtr. to Mtr. Ctr. Line (in): 9 Typ. Grnd. to Top Mtr. (in): Grnd. to Top Mtr (in): Grnd. to Bot. Mtr. (in): Grnd. to Bot. Mtr. (in): THRU BUS 46.0 Mod.: WMM Cat. Num.: WMM4225RJ Cat. Num.: WMM6225RJ Grnd. Clr. (in):2.62 Grnd. Clr. (in):2.62 GROUND LINE *WARNING: CHECK UTILITY REQUIREMENT BEFORE INSTALLATION METER OVE 78" FROM FLOOR GENERAL INFORMATION: SYSTEM VOLTAGE: 3Ø/4W 208/20V WYE PAINT: ANSI 6 (STD) MINIMUM GROUND CLEARANCE: 2.0 MINIMUM METER SOCKET HEIGHT: MAXIMUM METER SOCKET HEIGHT: Mtr. to Mtr. Ctr. Line (in): 9 Typ. Mtr. to Mtr. Ctr. Line (in): 9 Typ. Mtr. to Mtr. Ctr. Line (in): NA Grnd. to Top Mtr (in): Grnd. to Top Mtr (in): Grnd. to Bot. Mtr. (in): Grnd. to Bot. Mtr. (in): Grnd. to Bot. Mtr. (in): Grnd. to Top Mtr. (in): C Mod.: WT Mod.:WML Cat. Num.: WT3600PU Cat. Num.: WMM6225RJ Cat. Num.: WMM6225RJ Cat. Num.: WML3400RJ Grnd. Clr. (in): 2.0 Grnd. Clr. (in):2.62 Grnd. Clr. (in):2.62 Grnd. Clr. (in): mellbx NO. REVISIONS DRAWN BY: Mtr. to Mtr. Ctr. Line (in): NA Grnd. to Top Mtr. (in): Grnd. to Bot. Mtr. (in): C 225 Mod.:WML Cat. Num.: WML3225RJ Grnd. Clr. (in): 32.8 JOB Ocean 500 P.O. CUST. WORLD ELECTRIC SUPPLY INC CONTR ISLANDS MECHANICAL CONTRTOR INC CONSLT TIE BY ENG. LOC. DESIGNATION mellbx S.O. Norcross, Georgia MFG. LOC. DWG. NO. DWG. FILE SHEET METER CENTER C 2ND FLOOR mellbx000_ _03_00_o OF 2 REV.

44 Mod: WT Mod.:WML Mod.:WML JOB Ocean 500 P.O. CUST. WORLD ELECTRIC SUPPLY INC CONTR ISLANDS MECHANICAL CONTRTOR INC CONSLT TIE BY ENG. LOC. DESIGNATION mellbx S.O. Norcross, Georgia MFG. LOC. DWG. NO. DWG. FILE SHEET METER CENTER C 2ND FLOOR mellbx000_ _03_00_o OF 2 REV.

45 03.63 Overall Width Mtr. to Mtr. Ctr. Line (in): 9 Typ. Mtr. to Mtr. Ctr. Line (in): 9 Typ. Mtr. to Mtr. Ctr. Line (in): 9 Typ. Grnd. to Top Mtr. (in): 52 Grnd. to Top Mtr (in): 79 Grnd. to Top Mtr (in): 79 Grnd. to Bot. Mtr. (in): 34 Grnd. to Bot. Mtr. (in): 34 Grnd. to Bot. Mtr. (in): THRU BUS 46.5 Mod.: WMM Cat. Num.: WMM3225RJ Cat. Num.: WMM6225RJ Cat. Num.: WMM6225RJ Grnd. Clr. (in):22.2 Grnd. Clr. (in):22.2 Grnd. Clr. (in):22.2 GROUND LINE *WARNING: CHECK UTILITY REQUIREMENT BEFORE INSTALLATION METER OVE 78" FROM FLOOR GENERAL INFORMATION: SYSTEM VOLTAGE: 3Ø/4W 208/20V WYE PAINT: ANSI 6 (STD) MINIMUM GROUND CLEARANCE: 2.0 MINIMUM METER SOCKET HEIGHT: MAXIMUM METER SOCKET HEIGHT: Mtr. to Mtr. Ctr. Line (in): 9 Typ. Mtr. to Mtr. Ctr. Line (in): 9 Typ. Mtr. to Mtr. Ctr. Line (in): 9 Typ. Grnd. to Top Mtr (in): 79 Grnd. to Top Mtr (in): 79 Grnd. to Top Mtr (in): 79 Grnd. to Bot. Mtr. (in): 34 Grnd. to Bot. Mtr. (in): 34 Grnd. to Bot. Mtr. (in): Mod.:WTB Cat. Num.: WTB3600CU Cat. Num.: WMM6225RJ Cat. Num.: WMM6225RJ Cat. Num.: WMM6225RJ Grnd. Clr. (in): 2.0 Grnd. Clr. (in):22.2 Grnd. Clr. (in):22.2 Grnd. Clr. (in): mellbx NO. REVISIONS DRAWN BY: JOB Ocean 500 P.O. CUST. WORLD ELECTRIC SUPPLY INC CONTR ISLANDS MECHANICAL CONTRTOR INC CONSLT TIE BY ENG. LOC. DESIGNATION mellbx S.O. Norcross, Georgia MFG. LOC. DWG. NO. DWG. FILE SHEET METER CENTER C 4TH FLOOR mellbx000_ _03_00_o OF 2 REV.

46 Mod.:WTB JOB Ocean 500 P.O. CUST. WORLD ELECTRIC SUPPLY INC CONTR ISLANDS MECHANICAL CONTRTOR INC CONSLT TIE BY ENG. LOC. DESIGNATION mellbx S.O. Norcross, Georgia MFG. LOC. DWG. NO. DWG. FILE SHEET METER CENTER C 4TH FLOOR mellbx000_ _03_00_o OF 2 REV.

47 74.28 Overall Width Mtr. to Mtr. Ctr. Line (in): 9 Typ. Mtr. to Mtr. Ctr. Line (in): 9 Typ. Grnd. to Top Mtr. (in): 63.8 Grnd. to Top Mtr (in): 82 Grnd. to Bot. Mtr. (in): 36.8 Grnd. to Bot. Mtr. (in): PROV THRU BUS PROV PROV Mod.: WMM Cat. Num.: WMM4225RJ Cat. Num.: WMM6225RJ Grnd. Clr. (in):24.65 Grnd. Clr. (in):24.65 GROUND LINE *WARNING: CHECK UTILITY REQUIREMENT BEFORE INSTALLATION METER OVE 78" FROM FLOOR GENERAL INFORMATION: SYSTEM VOLTAGE: 3Ø/4W 208/20V WYE PAINT: ANSI 6 (STD) MINIMUM GROUND CLEARANCE: 2.0 MINIMUM METER SOCKET HEIGHT: 36.8 MAXIMUM METER SOCKET HEIGHT: 8.8 Mtr. to Mtr. Ctr. Line (in): 9 Typ. Grnd. to Top Mtr (in): 82 Grnd. to Bot. Mtr. (in): Cat. Num.: WMM6225RJ Grnd. Clr. (in):24.65 Mtr. to Mtr. Ctr. Line (in): 9 Typ. Mtr. to Mtr. Ctr. Line (in): 9 Typ. Grnd. to Top Mtr (in): 82 Grnd. to Top Mtr (in): 82 Grnd. to Bot. Mtr. (in): 37 Grnd. to Bot. Mtr. (in): Mod.:WB Mod.: WTB Cat. Num.: WMM6225RJ Cat. Num.: WB32000B Cat. Num.: WTB32000BU Cat. Num.: WMM6225RJ Grnd. Clr. (in):24.65 Grnd. Clr. (in): 2.0 Grnd. Clr. (in): 5.03 Grnd. Clr. (in):24.65 JOB Ocean 500 P.O. CUST. WORLD ELECTRIC SUPPLY INC CONTR ISLANDS MECHANICAL CONTRTOR INC CONSLT 0 mellbx NO. REVISIONS DRAWN BY: TIE S.O. Norcross, Georgia BY mellbx ENG. LOC. MFG. LOC. DWG. FILE DESIGNATION METER CENTER D ST FLOOR DWG. NO. mellbx000_ _03_00_o SHEET OF 5 REV.

48 Mtr. to Mtr. Ctr. Line (in): 9 Typ. Grnd. to Top Mtr (in): 82 Grnd. to Bot. Mtr. (in): Cat. Num.: WMM6225RJ Grnd. Clr. (in):24.65 Mtr. to Mtr. Ctr. Line (in): 9 Typ. Grnd. to Top Mtr (in): 82 Grnd. to Bot. Mtr. (in): Cat. Num.: WMM6225RJ Grnd. Clr. (in):24.65 Mtr. to Mtr. Ctr. Line (in): NA Grnd. to Bot. Mtr. (in): Grnd. to Top Mtr. (in): C Mod.:WML Cat. Num.: WML3400RJ Grnd. Clr. (in): JOB Ocean 500 P.O. CUST. WORLD ELECTRIC SUPPLY INC CONTR ISLANDS MECHANICAL CONTRTOR INC CONSLT TIE BY ENG. LOC. DESIGNATION mellbx S.O. Norcross, Georgia MFG. LOC. DWG. NO. DWG. FILE SHEET METER CENTER D ST FLOOR mellbx000_ _03_00_o OF 5 REV.

49 Mod.: WB Mod: WTB JOB Ocean 500 P.O. CUST. WORLD ELECTRIC SUPPLY INC CONTR ISLANDS MECHANICAL CONTRTOR INC CONSLT TIE BY ENG. LOC. DESIGNATION mellbx S.O. Norcross, Georgia MFG. LOC. DWG. NO. DWG. FILE SHEET METER CENTER D ST FLOOR mellbx000_ _03_00_o OF 5 REV.

50 Mod.:WML JOB Ocean 500 P.O. CUST. WORLD ELECTRIC SUPPLY INC CONTR ISLANDS MECHANICAL CONTRTOR INC CONSLT TIE BY ENG. LOC. DESIGNATION mellbx S.O. Norcross, Georgia MFG. LOC. DWG. NO. DWG. FILE SHEET METER CENTER D ST FLOOR mellbx000_ _03_00_o OF 5 REV.

51 JOB Ocean 500 P.O. CUST. WORLD ELECTRIC SUPPLY INC CONTR ISLANDS MECHANICAL CONTRTOR INC CONSLT TIE BY ENG. LOC. DESIGNATION mellbx S.O. Norcross, Georgia MFG. LOC. DWG. NO. DWG. FILE SHEET METER CENTER D ST FLOOR mellbx000_ _03_00_o OF 5 REV.

52 26.63 Overall Width Mtr. to Mtr. Ctr. Line (in): 9 Typ. Mtr. to Mtr. Ctr. Line (in): 9 Typ. Grnd. to Top Mtr (in): Grnd. to Top Mtr (in): 79 Grnd. to Bot. Mtr. (in): 34 Grnd. to Bot. Mtr. (in): THRU BUS 46.0 Cat. Num.: WMM6225RJ Cat. Num.: WMM6225RJ Grnd. Clr. (in):2.62 Grnd. Clr. (in):2.62 GROUND LINE *WARNING: CHECK UTILITY REQUIREMENT BEFORE INSTALLATION METER OVE 78" FROM FLOOR GENERAL INFORMATION: SYSTEM VOLTAGE: 3Ø/4W 208/20V WYE PAINT: ANSI 6 (STD) MINIMUM GROUND CLEARANCE: 2.0 MINIMUM METER SOCKET HEIGHT: MAXIMUM METER SOCKET HEIGHT: Mtr. to Mtr. Ctr. Line (in): 9 Typ. Grnd. to Top Mtr (in): 79 Grnd. to Bot. Mtr. (in): Cat. Num.: WMM6225RJ Grnd. Clr. (in):2.62 Mtr. to Mtr. Ctr. Line (in): 9 Typ. Mtr. to Mtr. Ctr. Line (in): 9 Typ. Mtr. to Mtr. Ctr. Line (in): 9 Typ. Mtr. to Mtr. Ctr. Line (in): 9 Typ. Grnd. to Top Mtr (in): 79 Grnd. to Top Mtr (in): 79 Grnd. to Top Mtr (in): 79 Grnd. to Top Mtr (in): 79 Grnd. to Bot. Mtr. (in): 34 Grnd. to Bot. Mtr. (in): 34 Grnd. to Bot. Mtr. (in): 34 Grnd. to Bot. Mtr. (in): Mod.: WTB Cat. Num.: WMM6225RJ Cat. Num.: WTB32000BU Cat. Num.: WMM6225RJ Cat. Num.: WMM6225RJ Cat. Num.: WMM6225RJ Grnd. Clr. (in):2.62 Grnd. Clr. (in): 2.0 Grnd. Clr. (in):2.62 Grnd. Clr. (in):2.62 Grnd. Clr. (in):2.62 JOB Ocean 500 P.O. CUST. WORLD ELECTRIC SUPPLY INC CONTR ISLANDS MECHANICAL CONTRTOR INC CONSLT 0 mellbx NO. REVISIONS DRAWN BY: TIE S.O. Norcross, Georgia BY mellbx ENG. LOC. MFG. LOC. DWG. FILE DESIGNATION METER CENTER D 4TH FLOOR DWG. NO. mellbx000_ _03_00_o SHEET OF 2 REV.

53 Mod: WTB JOB Ocean 500 P.O. CUST. WORLD ELECTRIC SUPPLY INC CONTR ISLANDS MECHANICAL CONTRTOR INC CONSLT TIE BY ENG. LOC. DESIGNATION mellbx S.O. Norcross, Georgia MFG. LOC. DWG. NO. DWG. FILE SHEET METER CENTER D 4TH FLOOR mellbx000_ _03_00_o OF 2 REV.

54 66.4 Overall Width Mtr. to Mtr. Ctr. Line (in): 9 Typ. Mtr. to Mtr. Ctr. Line (in): 9 Typ. Grnd. to Top Mtr (in): 79 Grnd. to Top Mtr (in): 79 Grnd. to Bot. Mtr. (in): 34 Grnd. to Bot. Mtr. (in): THRU BUS 46.5 Cat. Num.: WMM6225RJ Cat. Num.: WMM6225RJ Grnd. Clr. (in):22.2 Grnd. Clr. (in):22.2 GROUND LINE *WARNING: CHECK UTILITY REQUIREMENT BEFORE INSTALLATION METER OVE 78" FROM FLOOR GENERAL INFORMATION: SYSTEM VOLTAGE: 3Ø/4W 208/20V WYE PAINT: ANSI 6 (STD) MINIMUM GROUND CLEARANCE: 2.0 MINIMUM METER SOCKET HEIGHT: MAXIMUM METER SOCKET HEIGHT: Mtr. to Mtr. Ctr. Line (in): 9 Typ. Grnd. to Top Mtr (in): 79 Grnd. to Bot. Mtr. (in): Cat. Num.: WMM6225RJ Grnd. Clr. (in):22.2 Mtr. to Mtr. Ctr. Line (in): 9 Typ. Mtr. to Mtr. Ctr. Line (in): 9 Typ. Mtr. to Mtr. Ctr. Line (in): 9 Typ. Grnd. to Top Mtr (in): 79 Grnd. to Top Mtr (in): 79 Grnd. to Top Mtr (in): 79 Grnd. to Bot. Mtr. (in): 34 Grnd. to Bot. Mtr. (in): 34 Grnd. to Bot. Mtr. (in): Mod.:WTB Cat. Num.: WMM6225RJ Cat. Num.: WTB3600CU Cat. Num.: WMM6225RJ Cat. Num.: WMM6225RJ Grnd. Clr. (in):22.2 Grnd. Clr. (in): 2.0 Grnd. Clr. (in):22.2 Grnd. Clr. (in): mellbx NO. REVISIONS DRAWN BY: Mtr. to Mtr. Ctr. Line (in): 9 Typ. Mtr. to Mtr. Ctr. Line (in): 9 Typ. Grnd. to Top Mtr (in): 79 Grnd. to Top Mtr (in): 79 Grnd. to Bot. Mtr. (in): 34 Grnd. to Bot. Mtr. (in): Cat. Num.: WMM6225RJ Cat. Num.: WMM6225RJ Grnd. Clr. (in):22.2 Grnd. Clr. (in):22.2 JOB Ocean 500 P.O. CUST. WORLD ELECTRIC SUPPLY INC CONTR ISLANDS MECHANICAL CONTRTOR INC CONSLT TIE BY ENG. LOC. DESIGNATION mellbx S.O. Norcross, Georgia MFG. LOC. DWG. NO. DWG. FILE SHEET METER CENTER E mellbx000_ _03_00_o OF 5 REV.

55 Mtr. to Mtr. Ctr. Line (in): 9 Typ. Grnd. to Top Mtr (in): 79 Grnd. to Bot. Mtr. (in): Cat. Num.: WMM6225RJ Grnd. Clr. (in):22.2 Mtr. to Mtr. Ctr. Line (in): NA Grnd. to Top Mtr. (in): Grnd. to Bot. Mtr. (in): Mod.:WML Cat. Num.: WML3225RJ Grnd. Clr. (in): 33.3 C JOB Ocean 500 P.O. CUST. WORLD ELECTRIC SUPPLY INC CONTR ISLANDS MECHANICAL CONTRTOR INC CONSLT TIE BY ENG. LOC. DESIGNATION mellbx S.O. Norcross, Georgia MFG. LOC. DWG. NO. DWG. FILE SHEET METER CENTER E mellbx000_ _03_00_o OF 5 REV.

56 Mod.:WTB JOB Ocean 500 P.O. CUST. WORLD ELECTRIC SUPPLY INC CONTR ISLANDS MECHANICAL CONTRTOR INC CONSLT TIE BY ENG. LOC. DESIGNATION mellbx S.O. Norcross, Georgia MFG. LOC. DWG. NO. DWG. FILE SHEET METER CENTER E mellbx000_ _03_00_o OF 5 REV.

57 Mod.:WML JOB Ocean 500 P.O. CUST. WORLD ELECTRIC SUPPLY INC CONTR ISLANDS MECHANICAL CONTRTOR INC CONSLT TIE BY ENG. LOC. DESIGNATION mellbx S.O. Norcross, Georgia MFG. LOC. DWG. NO. DWG. FILE SHEET METER CENTER E mellbx000_ _03_00_o OF 5 REV.

58 JOB Ocean 500 P.O. CUST. WORLD ELECTRIC SUPPLY INC CONTR ISLANDS MECHANICAL CONTRTOR INC CONSLT TIE BY ENG. LOC. DESIGNATION mellbx S.O. Norcross, Georgia MFG. LOC. DWG. NO. DWG. FILE SHEET METER CENTER E mellbx000_ _03_00_o OF 5 REV.

59 500 Ocean Panelboards & Load Centers Electrical Submittals

60 s DRAWING TRANSMITTAL JOB NAME: QUOTE: CONTENTS: Panelboards Panelboards Ocean 500 mellbx000_ _02_00_o00 Revised Submittal Package SECTION Panelboards These drawings are for: Approval Record ENGINEER: SGM Engineers Inc. CONTRTOR: Islands Mechanical DISTRIBUTOR: World C Electric Supply : 0/9/205 08/6/2004 SUBMITTED BY: Your Brian Name Mello Sparky Want to B Electric Siemens Energy & Automation Western NW Freeway Way, #950 Suite Houston Jacksonville, TX FL Phone: (904) (73) Fax: (73) 69020

61 Panelboard General Specifications Class CTL Panelboards Class CTL panelboards incorporate physical features which, in conjunction with the physical size, configuration, or other means provided in Class CTL circuit breakers, are designed to prevent the installation of more over current protective poles than that number for which the device is designed and rated, per UL 67 and National Electrical Code (NEC) NFPA70. Service Entrance Equipment When a panelboard is used as service entrance equipment, it must be located near the point of entrance of building supply conductors. In a main lugs only panel, the number of breakers or switches directly connected to the main bus must be limited to six. In a panel having a main breaker or main switch, the number of circuits are not limited except as may be provided under other panelboard requirements, i.e., lighting and appliance branch circuit panelboards. Also, panels must include a connector for bonding and grounding neutral conductor. Panelboard Code Data 42Circuit Rule: NEC Paragraph defines a lighting and appliance branch circuit panelboard as one having more than 0 percent of its over current devices rated 30 amperes or less, for which neutral connectors are provided. NEC paragraph states that not more than 42 over current devices (other than those provided in the mains) of a lighting and appliance branchcircuit panelboard shall be installed in any one cabinet. For the purpose of this article, a twopole circuit breaker shall be considered two over current devices; a threepole circuit breaker shall be considered three over current devices. (NEC and.5 do not apply to panelboards feeding and communication circuits. Panelboards for this application must be so marked.) Standard ground connectors are also suitable for Copper or Aluminum wire. Ground connector assemblies (EGK, IGK) have (7) /0 max. and (5) #6 max. connections. The /0 holes are capable of connecting up (3) #0 max. wires. Copper ground assemblies (ECGK, ICGK) are rated for copper wire only and have the same wiring capacity as the Al/Cu connectors. Standard neutrals, like standard main lugs, are also rated for copper or aluminum wire. The neutral cross bar material follows the selection bus. Copper neutral lugs are rated for copper cable only and available as a price added option. Lug Data Space Required for Mounting of Double Panels Wall Shown mounted in wall Use two or more panelboards with feedthru or subfeed lugs when:. Lighting and appliance panelboards are required with more than 42 circuits. 2. More circuit mounting space is required than is provided in the largest box size. FeedThru Lugs Wall Fig. G Fig. G2 Shown mounted on surface of wall Subfeed Lugs or Double Lugs Integrated Equipment Short Circuit Rating The term Integrated Equipment Short Circuit Rating refers to the application of series connected circuit breakers in combination that allows some breakers to have lower individual interrupting ratings than the available fault current. This is permitted as long as the series combination has been tested and certified by UL. Standards NEC: 2002 NEMA: PB UL: 67 and 50. Listed by Underwriter s Laboratories, Inc., under Panelboards File #E2269, and #E406. Meets Federal Specification WP5c. Wire Connectors Standard wire connectors in Siemens panels are suitable for copper or aluminum cables rated 60/75 degree. Copper main lugs are price added option for most panel types and some Circuit Breakers (check with Siemens sales for availability). It should be noted that most copper lugs will only accept copper cables. Some applications, % rated devices in particular, require that the cable and connectors be rated 90 degree but are sized to the 75 degree tables. Feedthru lugs are mounted at the opposite end of the main bus from the main lugs or main breaker and are used to connect two or more panelboards to the incoming feeder. The feeder cables are brought into Panelboard and connected to the main lugs or main breaker. Cables interconnecting the two panelboards are connected to the feedthru lugs in Panelboard and are carried over the main lugs in Panelboard 2. This arrangement could be reversed with the main lugs located at the top and the feedthru lugs at the bottom of the panel. Subfeed lugs are mounted directly beside the main incoming lugs and are used to connect two or more panelboards to the incoming feeder. The feeder cables are brought into Panelboard and connected to the main lugs. Another set of cables that are the same size are connected to the subfeed lugs of Panelboard and are carried over the main lugs of Panelboard 2. 3

62 General Specifications Bussing Sequence Interiors are designed to accommodate top or bottom feed. Regardless of which is specified, the uppermost pole is always on A phase; the second pole down is always on B phase, and the third pole down is always on C phase (assuming 3Ø panel). As standard, branch breakers shall be mounted at the top of the panel with spaces at the bottom, regardless of the direction panel is fed. All breakers have bolted connections except plugin type. The panel design provides bracing up to 200,000A IR UL short circuit rating. Casehardened, high performance, thread rolling screws are used on branch bus. Table G2 Panelboard Ratings Description P P2 P3 P4 P5 Max. Voltage 480Y/277V Max. 600V Max. 600V Max. 600V Max. 600V Max. 250V DC Max 500V DC Max. 500V DC Max. 500V DC Max. 500V DC Max. System Phase, 2wire Phase, 2wire Phase, 2wire Phase, 3wire Phase, 3wire Phase, 3wire Phase, 3wire Phase, 3wire 3Phase, 4wire 3Phase, 4wire 3Phase, 3wire 3Phase, 3wire 3Phase, 4wire 3Phase, 3wire 3Phase, 3wire 3Phase, 4wire 3Phase, 4wire 3Phase, 3wire Mains Main Lugs 25A400A 25A600A 250A800A 400A200A 800A600A Main Breaker A400A A600A 225A600A 400A800A 800A200A Main Switch A200A 400A200A Circuits 8, 30, 42 8, 30, 42, 54 Branch Ratings 5A 5225A 5600A 5600A C/B 5200A C/B 30200A Fusible Fusible Branch BL, BLH, HBL, BQD, BL, BLH, HBL, BQD, BL, BLH, HBL, BQD, All 5600A All 5200A C/B Disconnect BQD6, BLE, BLEH, BLF, BQD6, QJ2, HQJ2, BQD6, QJ2, HQJ2, Breakers and LMD at 30A200A VB Switches Devices BLHF, BAF, BAFH, BGL QJ2H, ED2, ED4, QJ2H, ED2, ED4, 800 Amps, 30200A A HCP HED4, ED6, HHED6, HED4, ED6, HHED6 Fusible Switches Switches BLE, BLEH, BLF, BLHF, BLE, BLEH, BLF, BLHF BAF, BAFH, BGL BAF, BAFH, BGL Subfeed ED2, ED4, ED6, HED4, JD6, JXD6, HJD6, JD6, JXD6, HJD6, Circuit HED6, QJ2, QJH2, HJXD6, FD6, HFD6, FD6, HFD6, FXD6, Breakers QJ2H, FXD6, FD6, FXD6, HFXD6 HFXD6 HFD6, HFXD6 Enclosure 32, 38, A 26, 32, 38, 44, 50, 56, 56, 62, 68, 74, 80 60, 75, 90 60, 75, 90 Heights (83, 965, 8) 62, 68, 74 ( ) (524, 905, 2286) (524, 905, 2286) Inches (mm) 56, 62, A (660880) (422, 575, 727) Standard FasLatch Piece FasLatch Piece FasLatch Piece Four Piece Four Piece Trims Surface or Flush Surface or Flush Surface or Flush Surface Surface Functional pricing is based on circuits shown. However, the panel can be figured with less circuits. P can have subfeed breaker. P2 and P3 can have up to (2) FD subfeed breakers. JD and FD breakers are mounted vertical. Limitations apply. Trim ring provided for flush applications. 4

63 General Specifications Table G3 Typical Panelboard Modifications Description Lighting and Distribution Panelboards Distribution Panelboards P P2 P3 P4 P5 Box Type 3R/2 Type 4, 4X Drip Proof Drip Proof Hood Only Sealed Box Gasketed Trim Wider Box Deeper Box Front Hinged Front DoorinDoor Front Common Front Split Door Special Locks Nameplate Interior Aluminum Equipment Ground Bar Standard Standard Standard Standard Standard Copper Equipment Ground Bar Insulated Equipment Ground Subfeed Lugs FeedThru Lugs Split Bus Compression Lugs Copper Lugs 200% Neutral Check Plant For Check Plant For Availability Availability Temperature Rated Aluminum Standard Standard Standard Standard Standard Temp. Rise Over Ambient Copper 750 Ampere / in. Aluminum 0 Ampere / in. Copper Copper Plating Silver or Tin Tin Tin Std./ Tin Std./ Silver Std./ Silver Std./ Silver Optional Silver Optional Tin Optional Tin Optional Remote Control Switches External Mounted Time Clocks External Mounted Circuit Breaker Shunt Trips R, J and T Fuse Clips All aluminum bus is tinplated. Available as an option. Table G4 UL Fuse Classes Interrupting Class Amperes Volts Ratings (ka) l 2 t, l i Circuits H and 600V or less 0 Less than 0,000A Available K and 600V or less l t RK5 up to A, li RK5 up to A Feeder circuits J V or less 200 l t Low, li Low Feeder circuits (motor load small %) RK / V or less and 250V or less 200 l t Slightly >J, li Slightly > J Feeder circuits (motor load small %) RK5 / V or less and 250V or less 200 l t > RK, li > RK Motor starting currents a factor T 800, and 600V or less To 200 l t Low, li Low NonMotor loads L V or less 200 l t Low, li Low Mains, feeder circuits Per UL 67. Fuses do not prohibit the use of Class H type fuse in switch. 5

64 Catalog Numbering System P C 4 2 F X A T S Type of Panel P, P2, P3, P4, P5 Voltage and System C= 208Y/20 3Ø 4 W Wye All E= 480Y/277 3Ø 4 W Wye All D= 240 3Ø 3 W Delta All F= 480 3Ø 3 W Delta P2, P3, P4, P5 G= 600 3Ø 3 W Delta P2, P3, P4, P5 I= 347 P2, P3, P4, P5 B= 240/20 3Ø 4 W Delta BØ High Leg All Q= 240/20 3Ø 4 W Delta CØ High Leg P2, P3, P4, P5 X= 20/240 2Ø 5 W Single Neutral P2, P3, P4, P5 A= 20/240 Ø 3 W Grounded Neutral (2) All H= 20 Ø 2 W Grounded Neutral (2) All J= 240 Ø 2 W No Neutral (3) All Y= 25 Ø 2 W Grounded Neutral (2) P2, P3, P4, P5 Z= 500 2W DC P2, P3, P4, P5 K= 220/27 3Ø 4 W Wye All M=380/220 3Ø 4 W Wye All Circuits or Enclosure Height P 8, 30, 42 P3 56, 62, 68, 74, 80 P2 8, 30, 42, 54 P4, P5 60, 75, 90 R= 45/240 3Ø 4 W Wye All S= 440/250 3Ø 4 W Wye All L= 600/347 3Ø 4 W Wye All T= 230 3Ø 3 W Delta All Z= 380 3Ø 3 W Delta P2, P3, P4, P5 = 24V DC Pole Branches Only (3) All 2= 24V DC 2 Pole Branches Only (3) All 3= 48V DC Pole Branches Only (3) All 4= 48V DC 2 Pole Branches Only (3) All 5= 25V DC Pole Branches Only (3) All N= 25V DC 2 Pole Branches Only All O= 25/250V DC 2 Pole Branches Only All P= 25/250V DC 2 & 3 Pole Branches All U= 20V 3p3w All V= 24V 3p3w Grounded B Phase All Main Lug (ML), Main Breaker (See Main Breaker Table coding below), Main Switch (MS) Amperage 400 Amp = P = P3 600 = P = P4, P5 Bus Material Bus Plating Letter Temp rated Al. TinPlated A 750A/sq. in. Al. TinPlated B Temp rated Cu. TinPlated C Temp rated Cu. SilverPlated E Temp rated Cu. TinPlated F 0A/sq. in. Cu. TinPlated G 0A/sq. in. Cu. SilverPlated H Feed Location T = Top B = Bottom Bus Code P P2 P3 P4 P5 A B n/a C n/ a n/ a F n/a E n/a G n/a optional optional H n/a optional optional indicates default for this bus type. Mounting S = Surface F = Flush. Flush trims extend /2" beyond the base box dimensions on P, P2 and P3 and 2" on P4 and P5 panels. Main Breaker Code (Breaker Type) Code (BAF) BA, (BAFH) BF, (BQD) BQ, (BQD6) B6, (BL) BL, (BLEH) BE, (BLH) BH, (BLR) BR, (HBL) HB, (BGLSWI) B, (BLEGFCI) BG, (BLFGFCI), (CED6) CE, (ED2) ED, (ED4) E4, (ED6) E6, (HED4) H4, (HHED6) HA, (BLHFGFCI) B4, (BLHID) B2, (NGB) NB, (HQP) HQ, (QP) QP, (QPH) PQ, (CEG) C4, (CDG) C, (CDH) C2, (HDG) HD, (HDH) DH, (LDG) LD, (LDH) LA, (NDG) NG, (NDH) NH, (NDJ) NJ, (HEG) HE, (LEG) LE, (NEG), NE, (QJ2) QJ, (QJ2H) Q2, (QJH2) QH, (CFD6) CF, (FD6) FD, (FXD6) FX, (HFD6) HF, (HFXD6) H2, (HHFD6) H, (HHFXD6) H3, (CFG) C7, (CFH) C8, (HFG) HG, (HFH) HC, (LFG) LF, (LFH) LB, (NFG) NF, (NFH) NA, (NFJ) NC, (CJD6) CJ, (HHJD6) 6H, (HHJXD6) H9, (HJD6) H6, (HJXD6) H5, (HJXD6H) H7, (JD6) J6, (JXD2) JD, (JXD2H) J2, (JXD6) JX, (JXD6H) JH, (CJG) CA, (CJH) CB, (HJG) HI, (HJH) HU, (LJG) LG, (LJH) LJ, (NJG) NI, (NJH) NK, (NJJ) NO, (CLD6) CL (HHLD6) HH, (HHLXD6) XH, (HLD6) HL, (HLXD6) HO, (HLXD6H) HP, (LD6) L6, (LXD6) LX, (LXD6H) HL, (CLG) CD, (CLH) CK, (HLG) H8, (HLH) HW, (LLG) LL, (LLH) LO, (NLG) NL, (NLH) NQ, (HLMD6) HJ, (HLMXD6) HK, (LMD6) L, (LMXD6) LM, (CMD6) CM, (CMD6H) CH, (HMD6) HM, (HMXD6) HR, (HMXD6H) HS, (MD6) MD, (MXD6) MX, (MXD6H) MH, (HMG) HZ, (HMH) RH, (LMG) L2, (LMH) L3, (NMG) NM, (NMH) NR, (CND6) CN, (CND6H) C6, (HND6) HN, (HNXD6) HT, (HNXD6H) HX, (ND6) ND, (NXD6) NX, (NXD6H) NT, (HNG) NH, (HNH) GH, (LNG) LN, (LNH) L4, (NNG) NN, (NNH) NS Panel must not be a lighting and appliance panel. See NEC article 384. Standard bussing in P panels is tinplated for aluminum and copper. Standard bus is temperature rated to the maximum amperage in the panel but also meets the following: 750 amps per square inch aluminum for panels < 40 amps and >250<300 amps.0 amps per square inch copper for panels <80 amps and >250<400 amps. 6

65 PANEL BOARD DRAWINGS (Confirm Top or Bottom Entry)

66 PANEL DESIGNATION(S): HA HA PANELBOARD NOTES FEED THRU LUG 400A SECTION : OF PANEL TYPE :P CATALOG NUMBER :PC42ML400ST ENCLOSURE : Indoor SYSTEM VOLTAGE :208Y/20 3Ø 4W Wye IR RATING :42 K AIC MAIN BUS :400 A BUS MATERIAL :Aluminum Tin FEED :Bottom MOUNTING :Surface SE LEL :No SERIES RATED :Yes CONDUIT AREA :N/A *INDICATES POSITIONING NUMBERS TO HELP WITH THE MANUAL PLEMENT OF BREAKERS ON THE MECHANICAL VIEW A/3P BLH A/2P BLH 9 BLH BLH 3 BLH 5 BLH 7 BLH 9 BLH 2 BLH 23 BLH 25 BLH 27 BLH 29 BLH 3 PL BLH 33 BLH 35 BLH 37 BLH 39 BLH 4 A/3P 2 4 BLH 6 8 BLH 0 BLH 2 BLH 4 BLH 6 BLH 8 BLH 20 BLH 22 BLH 24 BLH 26 BLH 28 BLH 30 BLH 32 BLH 34 BLH 36 BLH 38 BLH 40 BLH 42 BLH KIT Main : 400A MAIN LUG ()4/0600Kcmil Branches : 60A /3PBLH A /3PBLH 25A /2PBLH 22 20A /PBLH 20A /PBLH Padlock Device PBLH PROV Options : Subfeed/Feedthru Provision Master NP Secured Screws Card HolderStd Plastic Sleeve Feed Thru Lug NP Location Trim Certification UL Std Al/Cu Gnd Connector PANELBOARD COMPONENTS MLO 400 A 5.75 Deep 20.0 JOB P.O. Ocean 500 CONTR CONSLT ISLANDS MECHANICAL CONTRTOR INC CUST. WORLD ELECTRIC SUPPLY INC 0 mellbx NO. REVISIONS DRAWN BY TIE S.O. Norcross, Georgia BY mellbx DWG. NO. HA mellbx000_ _04_00_o MFG. LOC. DWG. FILE ENG. LOC. DESIGNATION SHEET OF 5 REV.

67 PANEL DESIGNATION(S): HA4 HA4 PANELBOARD NOTES SECTION : OF PANEL TYPE :P CATALOG NUMBER :PC42ML400SN ENCLOSURE : Indoor SYSTEM VOLTAGE :208Y/20 3Ø 4W Wye IR RATING :42 K AIC MAIN BUS :400 A BUS MATERIAL :Aluminum Tin FEED :Bottom MOUNTING :Surface SE LEL :No SERIES RATED :Yes CONDUIT AREA :N/A *INDICATES POSITIONING NUMBERS TO HELP WITH THE MANUAL PLEMENT OF BREAKERS ON THE MECHANICAL VIEW ST 3 60A/3P BLH 5 BLH 7 BLH 9 BLH BLH 3 BLH 5 BLH 7 BLH 9 BLH 2 BLH 23 BLH 25 BLH 27 BLH 29 BLH 3 BLH 33 BLH 35 BLH 37 BLH 39 50A/3P 2 4 BLH 6 8 BLH 0 BLH 2 BLH 4 BLH 6 BLH 8 BLH 20 BLH 22 BLH 24 BLH 26 BLH 28 BLH 30 BLH 32 BLH 34 BLH 36 BLH 38 BLH 40 BLH 4 BLH KIT Main : 400A MAIN LUG (2)3/0250Kcmil PANELBOARD COMPONENTS Branches : 60A /3PBLH Shunt Trip with Control Voltage = 20 V 50A /3PBLH 8 20A /PBLH 7 PBLH PROV Options : Card HolderStd Plastic Sleeve Master NP Secured Screws NP Location Trim Certification UL Std Al/Cu Gnd Connector MLO 400 A 5.75 Deep 20.0 JOB P.O. Ocean 500 CONTR CONSLT ISLANDS MECHANICAL CONTRTOR INC CUST. WORLD ELECTRIC SUPPLY INC 0 mellbx NO. REVISIONS DRAWN BY TIE S.O. Norcross, Georgia BY mellbx DWG. NO. HA4 mellbx000_ _04_00_o MFG. LOC. DWG. FILE ENG. LOC. DESIGNATION SHEET OF 5 REV.

68 PANEL DESIGNATION(S): HB HB PANELBOARD NOTES FEED THRU LUG 250A SECTION : OF PANEL TYPE :P CATALOG NUMBER :PC42ML250ST ENCLOSURE : Indoor SYSTEM VOLTAGE :208Y/20 3Ø 4W Wye IR RATING :42 K AIC MAIN BUS :250 A BUS MATERIAL :Aluminum Tin FEED :Bottom MOUNTING :Surface SE LEL :No SERIES RATED :Yes CONDUIT AREA :N/A *INDICATES POSITIONING NUMBERS TO HELP WITH THE MANUAL PLEMENT OF BREAKERS ON THE MECHANICAL VIEW PANELBOARD COMPONENTS BL BL 3 BL 5 BL 7 BL 9 BL BL 3 BL 5 BL 7 BL 9 BL 2 BL 23 BL 25 BL 27 BL 29 BL 3 BL 33 BL 35 BL 37 BL 39 BL 4 35A/P 35A/P 2 BL 4 BL 6 BL 8 BL 0 BL 2 BL 4 BL 6 BL 8 BL 20 BL 22 BL 24 BL 26 BL 28 BL 30 BL 32 BL 34 BL 36 BL 38 BL 40 BL 42 BL KIT Main : 250A MAIN LUG ()#6350Kcmil Branches : 29 20A /PBL PBL PROV 2 35A /PBL Options : Subfeed/Feedthru Provision Master NP Secured Screws Card HolderStd Plastic Sleeve NP Location Trim Feed Thru Lug Certification UL Std Al/Cu Gnd Connector MLO 250 A 5.75 Deep 20.0 JOB P.O. Ocean 500 CONTR CONSLT ISLANDS MECHANICAL CONTRTOR INC CUST. WORLD ELECTRIC SUPPLY INC 0 mellbx NO. REVISIONS DRAWN BY TIE S.O. Norcross, Georgia BY mellbx DWG. NO. HB mellbx000_ _04_00_o MFG. LOC. DWG. FILE ENG. LOC. DESIGNATION SHEET OF 5 REV.

69 PANEL DESIGNATION(S): HB4 HB4 PANELBOARD NOTES SECTION : OF PANEL TYPE :P CATALOG NUMBER :PC42ML250SN ENCLOSURE : Indoor SYSTEM VOLTAGE :208Y/20 3Ø 4W Wye IR RATING :42 K AIC MAIN BUS :250 A BUS MATERIAL :Aluminum Tin FEED :Bottom MOUNTING :Surface SE LEL :No SERIES RATED :Yes CONDUIT AREA :N/A *INDICATES POSITIONING NUMBERS TO HELP WITH THE MANUAL PLEMENT OF BREAKERS ON THE MECHANICAL VIEW PANELBOARD COMPONENTS BL 5 ST 35A/3P BL 7 BL 9 BL BL 3 BL 5 BL 7 BL 9 BL 2 BL 23 BL 25 BL 27 BL 29 BL 3 BL 33 BL 35 BL 37 BL 39 50A/3P 2 4 BL 6 8 BL 0 BL 2 BL 4 BL 6 BL 8 BL 20 BL 22 BL 24 BL 26 BL 28 BL 30 BL 32 BL 34 BL 36 BL 38 BL 40 BL 4 BL KIT Main : 250A MAIN LUG ()#6350Kcmil Branches : 35A /3PBL Shunt Trip with Control Voltage = 20 V 50A /3PBL 22 20A /PBL 3 PBL PROV Options : Card HolderStd Plastic Sleeve Master NP Secured Screws NP Location Trim Certification UL Std Al/Cu Gnd Connector MLO 250 A 5.75 Deep 20.0 JOB P.O. Ocean 500 CONTR CONSLT ISLANDS MECHANICAL CONTRTOR INC CUST. WORLD ELECTRIC SUPPLY INC 0 mellbx NO. REVISIONS DRAWN BY TIE S.O. Norcross, Georgia BY mellbx DWG. NO. HB4 mellbx000_ _04_00_o MFG. LOC. DWG. FILE ENG. LOC. DESIGNATION SHEET OF 5 REV.

70 PANEL DESIGNATION(S): HC2 HC2 PANELBOARD NOTES FEED THRU LUG 250A SECTION : OF PANEL TYPE :P CATALOG NUMBER :PC42ML250ST ENCLOSURE : Indoor SYSTEM VOLTAGE :208Y/20 3Ø 4W Wye IR RATING :42 K AIC MAIN BUS :250 A BUS MATERIAL :Aluminum Tin FEED :Bottom MOUNTING :Surface SE LEL :No SERIES RATED :Yes CONDUIT AREA :N/A *INDICATES POSITIONING NUMBERS TO HELP WITH THE MANUAL PLEMENT OF BREAKERS ON THE MECHANICAL VIEW PANELBOARD COMPONENTS BL BL 3 BL 5 BL 7 BL 9 BL BL 3 BL 5 BL 7 BL 9 BL 2 BL 23 BL 25 BL 27 BL 29 BL 3 BL 33 BL 35 BL 37 BL 39 BL 4 2 BL 4 BL 6 BL 8 BL 0 BL 2 BL 4 BL 6 BL 8 BL 20 BL 22 BL 24 BL 26 BL 28 BL 30 BL 32 BL 34 BL 36 BL 38 BL 40 BL 42 BL KIT Main : 250A MAIN LUG ()#6350Kcmil Branches : 2 20A /PBL 2 PBL PROV Options : Subfeed/Feedthru Provision Master NP Secured Screws Card HolderStd Plastic Sleeve NP Location Trim Feed Thru Lug Certification UL Std Al/Cu Gnd Connector MLO 250 A 5.75 Deep 20.0 JOB P.O. Ocean 500 CONTR CONSLT ISLANDS MECHANICAL CONTRTOR INC CUST. WORLD ELECTRIC SUPPLY INC 0 mellbx NO. REVISIONS DRAWN BY TIE S.O. Norcross, Georgia BY mellbx DWG. NO. HC2 mellbx000_ _04_00_o MFG. LOC. DWG. FILE ENG. LOC. DESIGNATION SHEET OF 5 REV.

71 PANEL DESIGNATION(S): HC4 HC4 PANELBOARD NOTES SECTION : OF PANEL TYPE :P CATALOG NUMBER :PC42ML250SN ENCLOSURE : Indoor SYSTEM VOLTAGE :208Y/20 3Ø 4W Wye IR RATING :42 K AIC MAIN BUS :250 A BUS MATERIAL :Aluminum Tin FEED :Bottom MOUNTING :Surface SE LEL :No SERIES RATED :Yes CONDUIT AREA :N/A *INDICATES POSITIONING NUMBERS TO HELP WITH THE MANUAL PLEMENT OF BREAKERS ON THE MECHANICAL VIEW PANELBOARD COMPONENTS BL 5 ST 35A/3P BL 7 BL 9 BL BL 3 BL 5 BL 7 BL 9 BL 2 BL 23 BL 25 BL 27 BL 29 BL 3 BL 33 BL 35 BL 37 BL 39 50A/3P 2 4 BL 6 8 BL 0 BL 2 BL 4 BL 6 BL 8 BL 20 BL 22 BL 24 BL 26 BL 28 BL 30 BL 32 BL 34 BL 36 BL 38 BL 40 BL 4 BL KIT Main : 250A MAIN LUG ()#6350Kcmil Branches : 35A /3PBL Shunt Trip with Control Voltage = 20 V 50A /3PBL 20 20A /PBL 5 PBL PROV Options : Card HolderStd Plastic Sleeve Master NP Secured Screws NP Location Trim Certification UL Std Al/Cu Gnd Connector MLO 250 A 5.75 Deep 20.0 JOB P.O. Ocean 500 CONTR CONSLT ISLANDS MECHANICAL CONTRTOR INC CUST. WORLD ELECTRIC SUPPLY INC 0 mellbx NO. REVISIONS DRAWN BY TIE S.O. Norcross, Georgia BY mellbx DWG. NO. HC4 mellbx000_ _04_00_o MFG. LOC. DWG. FILE ENG. LOC. DESIGNATION SHEET OF 5 REV.

72 DESIGNATION(S): PANEL HD PANELBOARD NOTES SECTION : OF PANEL TYPE :P CATALOG NUMBER :PC54ML400ST ENCLOSURE : Indoor SYSTEM VOLTAGE :208Y/20 3Ø 4W Wye IR RATING :42 K AIC MAIN BUS :400 A BUS MATERIAL :Aluminum Tin FEED :Bottom MOUNTING :Surface SE LEL :No SERIES RATED :Yes CONDUIT AREA :N/A *INDICATES POSITIONING NUMBERS TO HELP WITH THE MANUAL PLEMENT OF BREAKERS ON THE MECHANICAL VIEW FEED THRU LUG 400A A/2P A/3P BLH 3 BLH A/2P 6 BLH A/2P 8 8 BLH 9 9 5A/P 0 BLH BLH 5A/P BLH 3 BLH 5 BLH 7 BLH 9 BLH 2 BLH 23 BLH 25 BLH 27 BLH 29 BLH 3 BLH 33 BLH 35 BLH 37 BLH 39 BLH 4 2 BLH 4 BLH 6 BLH 8 BLH 20 BLH 22 BLH 24 BLH 26 BLH 28 BLH 30 BLH 32 BLH 34 BLH 36 BLH 38 BLH 40 BLH 42 BLH BLH BLH BLH 45 BLH 47 BLH 49 BLH 5 BLH BLH 48 BLH 50 BLH 52 BLH 54 BLH KIT 27.0 Main : 400A MAIN LUG ()4/0600Kcmil Branches : 30A /3PBLH 25A /2PBLH 40A /2PBLH 45A /2PBLH 2 5A /PBLH 33 20A /PBLH 0 PBLH PROV PANELBOARD COMPONENTS Options : Subfeed/Feedthru Provision Master NP Secured Screws Card HolderStd Plastic Sleeve Feed Thru Lug NP Location Trim Certification UL Std Al/Cu Gnd Connector MLO 400 A 5.75 Deep 20.0 JOB P.O. Ocean 500 CONTR CONSLT ISLANDS MECHANICAL CONTRTOR INC CUST. WORLD ELECTRIC SUPPLY INC 0 mellbx NO. REVISIONS DRAWN BY TIE S.O. Norcross, Georgia BY mellbx DWG. NO. HD mellbx000_ _04_00_o MFG. LOC. DWG. FILE ENG. LOC. DESIGNATION SHEET OF 6 REV.

73 DESIGNATION(S): HD4 PANEL HD4 PANELBOARD NOTES SECTION : OF PANEL TYPE :P CATALOG NUMBER :PC42ML400SN ENCLOSURE : Indoor SYSTEM VOLTAGE :208Y/20 3Ø 4W Wye IR RATING :42 K AIC MAIN BUS :400 A BUS MATERIAL :Aluminum Tin FEED :Bottom MOUNTING :Surface SE LEL :No SERIES RATED :Yes CONDUIT AREA :N/A *INDICATES POSITIONING NUMBERS TO HELP WITH THE MANUAL PLEMENT OF BREAKERS ON THE MECHANICAL VIEW ST 3 60A/3P BLH 5 BLH 7 BLH 9 BLH BLH 3 BLH 5 BLH 7 BLH 9 BLH 2 BLH 23 BLH 25 BLH 27 BLH 29 BLH 3 BLH 33 BLH 35 BLH 37 BLH 39 40A/3P 40A/3P 2 4 BLH BLH 2 4 BLH 6 BLH 8 BLH 20 BLH 22 BLH 24 BLH 26 BLH 28 BLH 30 BLH 32 BLH 34 BLH 36 BLH 38 BLH 40 BLH 4 BLH KIT Main : 400A MAIN LUG ()4/0600Kcmil PANELBOARD COMPONENTS Branches : 60A /3PBLH Shunt Trip with Control Voltage = 20 V 2 40A /3PBLH 22 20A /PBLH 0 PBLH PROV Options : Card HolderStd Plastic Sleeve Master NP Secured Screws NP Location Trim Certification UL Std Al/Cu Gnd Connector MLO 400 A 5.75 Deep 20.0 JOB P.O. Ocean 500 CONTR CONSLT ISLANDS MECHANICAL CONTRTOR INC CUST. WORLD ELECTRIC SUPPLY INC 0 mellbx NO. REVISIONS DRAWN BY TIE S.O. Norcross, Georgia BY mellbx DWG. NO. HD4 mellbx000_ _04_00_o MFG. LOC. DWG. FILE ENG. LOC. DESIGNATION SHEET OF 5 REV.

74 PANEL DESIGNATION(S): HE3 HE3 PANELBOARD NOTES SECTION : OF PANEL TYPE :P CATALOG NUMBER :PC54ML250SN ENCLOSURE : Indoor SYSTEM VOLTAGE :208Y/20 3Ø 4W Wye IR RATING :42 K AIC MAIN BUS :250 A BUS MATERIAL :Aluminum Tin FEED :Bottom MOUNTING :Surface SE LEL :No SERIES RATED :Yes CONDUIT AREA :N/A *INDICATES POSITIONING NUMBERS TO HELP WITH THE MANUAL PLEMENT OF BREAKERS ON THE MECHANICAL VIEW BL 5 BL ST A/3P 50A/2P 30A/3P 30A/3P 0 BL BL 4 BL BL 3 6 BL BL 5 8 BL BL 7 20 BL BL 9 22 BL BL 2 24 BL BL BL BL BL BL BL BL BL BL 3 34 BL BL BL BL BL BL BL BL BL 43 BL 4 44 BL BL 43 BL 45 BL 47 BL 49 BL 5 46 BL 48 BL 50 BL 52 BL 53 BL BL KIT 27.0 Main : 250A MAIN LUG ()#6350Kcmil PANELBOARD COMPONENTS Branches : 35A /3PBL Shunt Trip with Control Voltage = 20 V 2 30A /3PBL 50A /2PBL 42 20A /PBL Options : Card HolderStd Plastic Sleeve Master NP Secured Screws NP Location Trim Certification UL Std Al/Cu Gnd Connector MLO 250 A 5.75 Deep 20.0 JOB P.O. Ocean 500 CONTR CONSLT ISLANDS MECHANICAL CONTRTOR INC CUST. WORLD ELECTRIC SUPPLY INC 0 mellbx NO. REVISIONS DRAWN BY TIE S.O. Norcross, Georgia BY mellbx DWG. NO. HE3 mellbx000_ _04_00_o MFG. LOC. DWG. FILE ENG. LOC. DESIGNATION SHEET OF 5 REV.

75 PANEL DESIGNATION(S): CA CA PANELBOARD NOTES SECTION : OF PANEL TYPE :P CATALOG NUMBER :PC42JD400ST ENCLOSURE : Indoor SYSTEM VOLTAGE :208Y/20 3Ø 4W Wye IR RATING :42 K AIC MAIN BUS :400 A FXD A/3P BUS MATERIAL FEED MOUNTING SE LEL :Aluminum Tin :Bottom :Surface :Yes SERIES RATED :Yes CONDUIT AREA :N/A *INDICATES POSITIONING NUMBERS TO HELP WITH THE MANUAL PLEMENT OF BREAKERS ON THE MECHANICAL VIEW A/3P BLH A/2P BLH A/2P BLH A/2P BLH A/2P BLH A/2P BLH 3 BLH 33 BLH 35 BLH 37 BLH 39 BLH 4 BLH 43 BLH PROV 60A/3P 2 4 BLH 6 25A/2P 8 BLH 0 45A/2P 2 BLH 4 50A/2P 6 BLH 8 60A/2P 20 BLH 22 60A/2P 24 BLH BLH 30 BLH 32 BLH 34 BLH 36 BLH 38 BLH PROV 40 PROV 42 KIT PANELBOARD COMPONENTS Main : 400A /3PJXD2 MAIN BREAKER (2)3/0500Kcmil Cu/ 4/0500 Al Branches : 50A /3PFXD6 3 BL/BQD PROVISION 30A /3PBLH 60A /3PBLH 20A /2PBLH 25A /2PBLH 2 45A /2PBLH 3 50A /2PBLH 3 60A /2PBLH 3 20A /PBLH Options : Subfeed/Feedthru Provision Master NP Secured Screws NP Location Trim Certification UL Std Al/Cu Gnd Connector Card Holder Metal Frame MAIN JXD2 400A/3P 5.75 Deep 20.0 JOB P.O. Ocean 500 CONTR CONSLT ISLANDS MECHANICAL CONTRTOR INC CUST. WORLD ELECTRIC SUPPLY INC 0 mellbx NO. REVISIONS DRAWN BY TIE S.O. Norcross, Georgia BY mellbx DWG. NO. CA mellbx000_ _04_00_o0030 MFG. LOC. DWG. FILE ENG. LOC. DESIGNATION SHEET OF 5 REV.

76 PANEL CB DESIGNATION(S): CB PANELBOARD NOTES N FEED THRU LUG 250A SECTION : OF 2 PANEL TYPE :P CATALOG NUMBER :PC42ML250ST ENCLOSURE : Indoor SYSTEM VOLTAGE :208Y/20 3Ø 4W Wye IR RATING :42 K AIC MAIN BUS :250 A BUS MATERIAL :Aluminum Tin FEED :Bottom MOUNTING :Surface SE LEL :No SERIES RATED :Yes CONDUIT AREA :N/A *INDICATES POSITIONING NUMBERS TO HELP WITH THE MANUAL PLEMENT OF BREAKERS ON THE MECHANICAL VIEW PANELBOARD COMPONENTS BL BL 3 BL 5 BL 7 BL 9 BL BL 3 BL 5 BL 7 BL 9 BL 2 BL 23 BL 25 BL 27 BL 29 BL 3 BL 33 BL 35 BL 37 BL 39 BL 4 2 BL 4 BL 6 BL 8 BL 0 BL 2 BL 4 BL 6 BL 8 BL 20 BL 22 BL 24 BL 26 BL 28 BL 30 BL 32 BL 34 BL 36 BL 38 BL 40 BL 42 BL KIT Main : 250A MAIN LUG ()#6350Kcmil Branches : 42 20A /PBL Options : Subfeed/Feedthru Provision Master NP Secured Screws Card HolderStd Plastic Sleeve NP Location Trim Feed Thru Lug Certification UL Std Al/Cu Gnd Connector MLO 250 A 5.75 Deep 20.0 JOB P.O. Ocean 500 CONTR CONSLT ISLANDS MECHANICAL CONTRTOR INC CUST. WORLD ELECTRIC SUPPLY INC 0 mellbx NO. REVISIONS DRAWN BY TIE S.O. Norcross, Georgia BY mellbx DWG. NO. CB mellbx000_ _04_00_o MFG. LOC. DWG. FILE ENG. LOC. DESIGNATION SHEET OF 0 REV.

77 PANEL CC DESIGNATION(S): CB PANELBOARD NOTES N2 MLO 250 A SECTION :2 OF 2 PANEL TYPE :P CATALOG NUMBER :PC42ML250ATST ENCLOSURE : Indoor SYSTEM VOLTAGE :208Y/20 3Ø 4W Wye IR RATING :42 K AIC MAIN BUS :250 A BUS MATERIAL :Aluminum Tin FEED :Top MOUNTING :Surface SE LEL :No SERIES RATED :Yes CONDUIT AREA :N/A *INDICATES POSITIONING NUMBERS TO HELP WITH THE MANUAL PLEMENT OF BREAKERS ON THE MECHANICAL VIEW PANELBOARD COMPONENTS BL 43 BL 45 BL 47 BL 49 BL 5 BL 53 BL 55 BL 57 BL 59 BL 6 BL 63 BL 65 BL 67 BL 69 BL 7 BL 73 BL 75 BL 77 BL 79 BL 8 BL 83 PL 44 BL 46 BL 48 BL 50 BL 52 BL 54 BL 56 BL 58 BL 60 BL 62 BL 64 BL 66 BL 68 BL 70 BL 72 BL 74 BL 76 BL 78 BL 80 BL 82 BL 84 BL KIT Main : 250A MAIN LUG ()#6350Kcmil Branches : 3 20A /PBL 28 PBL PROV 20A /PBL Padlock Device Options : Subfeed/Feedthru Provision Master NP Secured Screws Card HolderStd Plastic Sleeve NP Location Trim Certification UL Std Al/Cu Gnd Connector SUB FEED PROVISION 5.75 Deep 20.0 JOB P.O. Ocean 500 CONTR CONSLT ISLANDS MECHANICAL CONTRTOR INC CUST. WORLD ELECTRIC SUPPLY INC 0 mellbx NO. REVISIONS DRAWN BY TIE S.O. Norcross, Georgia BY mellbx DWG. NO. CB mellbx000_ _04_00_o MFG. LOC. DWG. FILE ENG. LOC. DESIGNATION SHEET 6 OF 0 REV.

78 PANEL CD DESIGNATION(S): CD PANELBOARD NOTES SECTION : OF PANEL TYPE :P CATALOG NUMBER :PC8ML25SN ENCLOSURE : Indoor SYSTEM VOLTAGE :208Y/20 3Ø 4W Wye IR RATING :42 K AIC MAIN BUS :25 A BUS MATERIAL :Aluminum Tin FEED :Bottom MOUNTING :Surface SE LEL :No SERIES RATED :Yes CONDUIT AREA :N/A *INDICATES POSITIONING NUMBERS TO HELP WITH THE MANUAL PLEMENT OF BREAKERS ON THE MECHANICAL VIEW PANELBOARD COMPONENTS Main : 25A MAIN LUG ()#6350Kcmil Branches : 20A /2PBL 5 20A /PBL PBL PROV Options : Card HolderStd Plastic Sleeve NP Location Trim Certification UL Std Al/Cu Gnd Connector BL 3 20A/2P BL 5 BL 7 BL 9 BL BL 3 BL 5 BL 7 2 BL 4 BL 6 BL 8 BL 0 BL 2 BL 4 BL 6 BL 8 BL KIT MLO 25 A 5.75 Deep 20.0 JOB P.O. Ocean 500 CONTR CONSLT ISLANDS MECHANICAL CONTRTOR INC CUST. WORLD ELECTRIC SUPPLY INC 0 mellbx NO. REVISIONS DRAWN BY TIE S.O. Norcross, Georgia BY mellbx DWG. NO. CD mellbx000_ _04_00_o MFG. LOC. DWG. FILE ENG. LOC. DESIGNATION SHEET OF 5 REV.

79 s DRAWING TRANSMITTAL JOB NAME: Revised Ocean Submittal 500 Package mellbx000_ _02_00_o00 CONTENTS: Misc Other (Busway, Meters etc.) Load Centers SECTION These drawings are for: Approval Record Sparky ENGINEER: SGM Engineers Inc. CONTRTOR: Islands Mechanical DISTRIBUTOR: World C Electric Supply : 0/9/205 08/6/2004 Want to B Electric SUBMITTED BY: Your Brian Name Mello Siemens Energy & Automation Western NW Freeway Way, #950 Suite Houston Jacksonville, TX FL Phone: (904) (73) Fax: (73) Other (Busway, Meters etc.) Misc

80 Combination head screw on the neutrals, ground, trim, upper pan, and bond screw provide installation flexibility. Invertible for bottom feed application. Ground bar field installed (select skus with G suffix will have ground bar factory installed). Main breaker convertible to main lug but main lug not convertible. Mounting tabs on the trim hold it in place on the load center, freeing up both hands to drive the trim screws. The prepositioned bond screw eliminates bond strap/ screw assemblies, and reduces the risk of losing components in the field. Single side inboard neutral on 24 circuits and below; dual on 30 circuits and above. A rigid, sturdy base pan provides the ruggedness required for the most harsh applications. The patented INSTAWIRE neutral/ground system allows for faster installation because screws are backed out, ready for wire insertion. The visible neutral and grounds system aids in the insertion of conductors. Aluminum bus. ES Series Load Centers ship in single piece carton. The outdoor enclosure has a slide hinge door for the easiest installation and can be removed by backing out only one screw. SPEEDFAX 20 Product Catalog

81 The ES Series Load Center product line provides a wide array of variation to meet any application need. The following offering is available in the ES Series product line: 270 Circuits/Spaces Indoor and Outdoor enclosures to 225 Amp Main Lug and Main Breakers Value packs a mix of branch breakers provided with the load center. ES Series phase Main Lug 25A, 224 circuits ES Series phase Main Breaker A, 3070 circuits ES Series 3phase Main Breaker Product Category RESI SPEEDFAX 20 Product Catalog

82

83 500 Ocean Safety Switches Electrical Submittals

84 s DRAWING TRANSMITTAL JOB NAME: Revised Ocean Submittal 500 Package mellbx000_ _02_00_o00 CONTENTS: Safety Switches Safety Switches SECTION These drawings are for: Approval Record ENGINEER: SGM Engineers Inc. CONTRTOR: Islands Mechanical DISTRIBUTOR: World C Electric Supply : 0/9/205 08/6/2004 SUBMITTED BY: Your Brian Name Mello Sparky Want to B Electric Siemens Energy & Automation Western NW Freeway Way, #950 Suite Houston Jacksonville, TX FL Phone: (904) (73) Fax: (73) Safety Switches

85 One Tough Switch Siemens Type VBII Safety Switch closed in operation open Siemens now offers a complete line of enclosed switches featuring unique and innovative designs that are unparalleled in the industry. General and Heavy Duty Switches Feature a TimeProven Design Like the timeproven VacuBreak Design, the Siemens VBII doublebreak switching action breaks the arc in two places. This reduces heat generation and increases switching speed by doubling the breaking distance. The result is enhanced performance and increased longevity. We also provide the most visible blade design available today. Unlike conventional knife blade switches, the blades are selfaligning to ensure positive contact. In addition, they have no wear and friction point since the electrical hinge has been eliminated. The result is a very fast, positive and reliable switching action for even the most severe applications. One Tough Switch: More Rugged and Durable in Demanding Applications Siemens engineers tackled the problem of designing a switch that would stand up under the most demanding industrial conditions, such as steel mills and mining operations. These environments require a switch that must work reliably and safely in the midst of falling liquids, airborne fibers, dust, metal particles, coolants and other contaminants. Tested and Retested All Siemens safety switches have been tested to meet all UL requirements and well beyond. These tests include those for general purpose enclosed switches and those designed for more specialized purposes where applicable. The result is a rugged, reliable design that will provide superior performance in a wide variety of applications. Page 59 of 66 3

86 General and Heavy Duty Features Siemens Type VBII Safety Switch Application General Duty Switches General Duty Switches are intended for applications where reliable performance and continuity of service are needed, but where duty requirements are not severe and usual service conditions prevail. (These switches are intended for use primarily with supply circuits rated 240V or less where the available fault current is less than,000a when used with Class R or T fuses or 0,000A max. when used with Class H fuses.) Application Heavy Duty Switches Heavy Duty Switches are intended for use in applications where:. Rugged construction, reliable performance, continuity of service and ease of maintenance are emphasized, or 2. Available fault currents higher than 0,000A are likely to be encountered, such as in manufacturing plants, mass production industries, and commercial, institutional and other large buildings served by network systems or transformers of higher capacities. 3. System voltage is 600V or DC Max. 4. A Type 2 or 4 / 4X enclosure is required. Short Circuit Withstand Ratings General Duty Switches Suitable for use on systems capable of delivering not more than,000 RMS symmetrical amperes of fault current when Class R fuses are installed. Also rated,000 max. In A ratings with Class J and T fuses. Short Circuit Withstand Ratings Heavy Duty Switches Suitable for use on systems capable of delivering not more than 200,000 RMS ➀ symmetrical amperes of fault current when Class J or R fuses are installed except the 800 and 200A switches, which are suitable for use on circuits capable of delivering not more than 200,000 RMS symmetrical amperes of fault current when Class L fuses are installed. 200A switches with Class T fuses and field adapter kit are also 200,000 RMS symmetrical rated. Fuses General Duty Switches Fusible switches will accept the following UL class fuses: Class H Class K Class R Class R fuse clip rejecter kits are required. Class T A switches (200A switches require field adapter kit). Heavy Duty Switches Fusible switches will accept the following UL class fuses: Class H Class K Class R Class R fuse clip rejecter kits are required. Class J 240 and 600V switches. 600V switches are field convertible. Class L 800 and 200A switches only. Class T 200A switches ( and 200A switches require an adapter kit). Cover Interlocks General Duty Switches Defeatablecover interlocks on Type switches and 60600A Type 3R switches prevent the switch door from being opened when in the ON position. Heavy Duty Switches Defeatable dual cover interlocks are standard on all heavy duty switches. Prevents cover from being opened when switch is in the ON position and prevents switch from being turned ON when door is opened. Underwriters Laboratories, Inc. Listed by UL under file #E4776 as enclosed switches and also suitable for use as service equipment. NEMA Specifications Meets NEMA standard KS990 for type GD and HD switches. 4 ➀,000 RMS for 60 A compact nonfusible switches.

87 Feature Comparison Federal Specifications Meets federal specification WS865C for heavy duty switches. (Type ND for general duty and Type HD for heavy duty). Type switches general purpose enclosures (Type ). Type 3R switches rainproof enclosures (Type 3R). Type 4 / 4X switches special purpose enclosures (Type 4 / 4X). Type 2 switches special purpose enclosures (Type 2). Groundable Neutrals General & Heavy Duty Switches Switches designed for use on systems requiring neutrals have groundable neutral blocks. Padlocks General & Heavy Duty Switches Padlockable cover latch and multiple padlock provisions on handle. General Heavy Duty Duty Features / Ratings 30 thru 600 Amps 800 and 200 Amps 240 Volts 600 Volts 250 Volts DC 600 Volts DC Doublebreak visible blade design (30200A) Quickmake, quickbreak switching action Highly visible ON/OFF handle indication Handle design for hook stick operation Padlockable cover latch Padlockable handle Voidable single cover interlock Voidable dual cover interlock Type enclosure Type 3R enclosure Type 2 enclosures Type 4 / 4X enclosures Generous wiring gutters that meet UL and NEC wirebending space requirements Lugs suitable for copper or aluminum at 60 or 75 C CU/AL wire lugs that meet UL 486B requirements Suitable for fieldconvertible compression connectors All plated copper current carrying parts (except wire grips) Spring reinforced Fuse Clips (except 30A general duty) Clear pivoting line terminal shield Replacement parts Field addable 200% neutral Provisions for UL Class T, R and H Fuses Provisions for UL Class J and L Fuses Metal nameplate Page 6 of 66 5

88 Elevator Disconnects Heavy Duty Safety Switch Type VBII, 60 Amp & Oversized 30A, Type (Indoor) Standards and Ratings UL Listed under file #E4776 Meets UL98 for switches and UL 50 for enclosures Meets NEMA Standard KS for enclosed switches Meets NEC wire bending space requirements Rated 0,000 AIC with Class H fuses or 200,000 AIC with Class R and J fuses 60A switches rated 0,000 AIC at 600Vdc with Class R or J fuses I 2 t rated (Amps 2 x Seconds = 200,000) 2X overload current rating exceeds 0X industry standard General Information Suitable for use as service entrance equipment Features Quickmake and break switching action Double break visible blade design Highly visible ON/OFF indication Rugged installer friendly enclosure design Modular design allows quick and easy replacement of parts Front removable lugs which can easily be converted to copper body or compression type lugs Defeatable dual cover interlock Catalog Shipping Number Amps Volts Description Weight (lbs.) HF36L Pole, 3 Wire, Fusible 9 HF222N Pole, 3 Wire, Fusible 8 HF322N Pole, 4 Wire, Fusible 9 HF Pole, 2 Wire, Fusible 20 HF Pole, 3 Wire, Fusible 9 HF362N Pole, 4 Wire, Fusible 9 HNF Pole, 2 Wire, NonFusible 9 HNF Pole, 3 Wire, NonFusible 8 Horsepower Ratings Volts Catalog Phase, 240V 3 Phase, 240V 250V Number Std Max Std Max DC HF222N 3 0 7¹ ₂ 5 0 HF322N 3 0 7¹ ₂ 5 0 Horsepower Ratings Volts Catalog 3 Phase, 480V 3 Phase, 600V 600V Number Std Max Std Max DC HF36L 5 5 7¹ ₂ 20 HF HF HF362N HNF HNF These switches are UL Listed for application on grounded B phase systems. 2 Dual horsepower ratings: Std applies when nontime delay fuses are installed. Max applies when timedelay fuses are installed. 3 Horsepower ratings listed also apply to Design E motors with no derating. 4 60A switches also rated 0HP at 250V DC. 5 60A switches also rated 20HP at 480V and 25HP at 600V, phase. 6 60A switches also rated 20HP on 3Ø, 240V systems. Product Specification Sheet HD60. Answers for industry.

89 Product Specification Sheet #HD60. (page 2 of 3) Accessories Catalog Number HA6234 HA26234 HA36234 HG6234 HG26234 HP62 HN623 HR62 HR62 HLC62 HCL623 Description One Normally Open and Closed Auxiliary Switches Two Normally Open and Closed Auxiliary Switches Low Voltage Auxiliary Switch Equipment Ground Lug Kit Isolated Equipment Ground Lug Kit Fuse Puller (3 per kit) (HF222N, HF322N, HF262, HF362, HF362N) Neutral Kit 240 Volt Class R Fuse Clip Kit (3 fuse clips per kit) (HF222N, HF322N) 600 Volt Class R Fuse Clip Kit (3 fuse clips per kit) (HF262, HF362, HF362N) Copper Lug Kit (9 lugs per kit) Compression Lug Neutral Barrier Kit Replacement Parts Catalog Number Description HFB22 Fusible 240 Volt Line Side Replacement Base (HF222N, HF322N) HBB22 Fusible 240 Volt Load Side Replacement Base (HF222N, HF322N) HFB62 Fusible 600 Volt Line Side Replacement Base (HF262, HF362,HF362N) HBB62 Fusible 600 Volt Load Side Replacement Base (HF262,HF362,HF362N) HNB623 NonFusible 600 Volt Replacement Base (HNF262, HNF362) HH623 Replacement Handle/Handle Guard HL62 Replacement Lugs (3 lugs per kit) HM623 Replacement Mechanism 2 Replacement Door Mechanical Lug Wire Ranges (60/75ºC, Cu/Al) Description Wire Range Line, Load #22 AWG (Al) or Neutral #42 AWG (Cu) Ground #44 AWG Compression Lugs 3 Wire Burndy ThomasBetts Ilsco Size CU Only CU/AL CU Only CU/AL CU Only CU/AL # #8 YA8CL BOX YA8CA L8 YA8CTC BE 602 #6 YA6CL BOX YA6CA CRB6 L6 YA6C 54905BE 607 CRB6L # CRB4 Also 30A, 600V for HF36L. 2 Place DOOR at the end of the switch catalog number. 3 If compression lugs are used for the neutral, order compression lug neutral barrier kit HCL623.

90 Product Specification Sheet #HD60. (page 3 of 3) Dimension Drawing.97 [ 50 ] 4.47 [ 4 ] 0.9 [ 259 ] 5.00 [ 27 ] SEE DETAIL B 2.48 [ 63 ].9 [ 30 ] 0.7 [ 258 ] 8.25 [ 209 ] 5.05 [ 28 ].27 DIA (3) [7].76 [ 9 ] OF BOX A (4) 3.04 [ 33 ] 3.36 [ 339 ] 7.46 [ 443 ] 5.79 [ 47 ].69 [ 43 ] A (2) LEFT& RIGHT SIDE.69 [ 43 ] 6.26 [ 43 ] 3.35 [ 85 ].47 [ 37 ] 6.00 [ 52 ] 2.25 [ 57 ].63 [ 6 ].89 [ 48 ] 8.35 [ 22 ].87 [ 22 ].88 DIA KNOCKOUT.53 [ 293 ].25 DIA GROUND KNOCKOUT TOP & BOTTOM.28 [ 7 ].27 DIA [ 7 ] 6.08 [ 55 ].87 [ 22 ] A (3) TOP & BOTTOM.65 [ 6 ] DETAIL B.75 [ 9 ] 2.07 [ 53 ] 2.50 [ 64 ] 9.5 [ 232 ] 2.50 [ 64 ].25 [ 6 ] LINE SIDE WIRE BEND LOAD SIDE WIRE BEND Dimensions shown in inches and millimeters ( ). Dimension shown accurate to + ¹ ₈ inch. KNOCKOUT CONDUIT CODE SIZE A (Tangential) V Fused 3.54 (90) 6.07 (54) 600V Fused 3.54 (90) 3.57 (9) NonFused 3.54 (90) 8.68 (220) Enclosure: Cold Rolled Steel.054 Thick (7 Gauge) Finish: ANSI Grey #6 Paint Building Technologies Division 5400 Triangle Parkway Norcross, GA Subject to change without prior notice All rights reserved Printed in USA 2009 Siemens is a registered trademark of Siemens AG. Product names mentioned may be trademarks or registered trademarks of their respective copanies. Specifications subject to change without notice.

91 Elevator Cab Lights Disconnects Heavy Duty Safety Switch Type VBII, 30 Amp, Type (Indoor) Standards and Ratings UL Listed under file #E4776 Meets UL98 for switches and UL 50 for enclosures Meets NEMA Standard KS for enclosed switches Meets NEC wire bending space requirements Rated 0,000 AIC with Class H fuses or 200,000 AIC with Class R and J fuses Rated,000 AIC at 600Vdc with Class R or J fuses I 2 t rated (Amps 2 x Seconds = 50,000) 2X overload current rating exceeds 0X industry standard Suitable for use as service entrance equipment Features Quickmake and break switching action Double break visible blade design Highly visible ON/OFF indication Rugged installer friendly enclosure design Modular design allows quick and easy replacement of parts Front removable wire grips which can easily be converted to copper body or compression type lugs Defeatable dual cover interlock General Information Catalog Shipping Number Volts Description Weight (lbs.) HF22N Pole, 3 Wire, Fusible 2 HF32N Pole, 4 Wire, Fusible 4 HF Pole, 2 Wire, Fusible 5 HF Pole, 3 Wire, Fusible 4 HF36N Pole, 4 Wire, Fusible 4 Horsepower Ratings Volts Catalog Phase, 240V 3 Phase, 240V 250V Number Std Max Std Max DC HF22N ¹ ₂ 3 3 7¹ ₂ 5 HF32N ¹ ₂ 3 3 7¹ ₂ 5 Horsepower Ratings Volts Catalog 3 Phase, 480V 3 Phase, 600V 600V Number Std Max Std Max DC HF HF ¹ ₂ 20 HF36N 5 5 7¹ ₂ 20 Mechanical Lug Wire Ranges (60/75 C, Cu/Al) Description Wire Range Line, Load #26 AWG (Al) or Neutral #46 AWG (Cu) Ground #44 AWG These switches are UL Listed for application on grounded B phase systems. 2 Dual horsepower ratings: Std applies when nontime delay fuses are installed. Max applies when timedelay fuses are installed. 3 Horsepower ratings listed also apply to Design E motors with no derating. 4 Also rated 5HP at 250V DC. 5 Also rated 7¹ ₂ HP at 480V, phase and 0HP at 600V, phase. Product Specification Sheet HD30.2 Answers for industry.

92 Product Specification Sheet #HD30.2 (page 2 of 2) Accessories Catalog Number HA6234 HA26234 HA36234 HG6234 HG26234 HP6 HN62 HR2 HR62 HLC62 HCL62 Description One Normally Open and Closed Auxiliary Switches Two Normally Open and Closed Auxiliary Switches Low Voltage Auxiliary Switch Equipment Ground Lug Kit Isolated Equipment Ground Lug Kit Fuse Puller (3 per kit) Neutral Kit 240 Volt Class R Fuse Clip Kit (3 fuse clips per kit) (HF22N, HF32N) 600 Volt Class R Fuse Clip Kit (3 fuse clips per kit) (HF26, HF36, HF36N) Copper Lug Kit (9 lugs per kit) Compression Lug Neutral Barrier Kit Replacement Parts Catalog Number Description HFB2 240 Volt Line Side Replacement Base (HF22N, HF32N) HBB2 240 Volt Load Side Replacement Base (HF22N, HF32N) HFB Volt Line Side Replacement Base (HF26, HF36, HF36N) HBB Volt Load Side Replacement Base (HF26, HF36, HF36N) HH623 Replacement Handle/Handle Guard HL62 Replacement Lugs (3 lugs per kit) HM623 Replacement Mechanism Replacement Door Compression Lugs 2 Wire Burndy ThomasBetts Ilsco Size CU Only CU/AL CU Only CU/AL CU Only CU/AL # #8 YA8CL BOX CRA8 L8 YA8CL BOX N8 602 #6 607 Place DOOR at the end of the switch catalog number. 2 If compression lugs are used for the neutral, order compression lug neutral barrier kit HCL62. Dimension Drawing.88 [ 48 ].04 [ 26 ] 3.2 [ 82 ].27 DIA (3) [7].79 [ 20 ] 2.42 [ 62 ] 7.67 [ 95 ] 4.34 [ 0 ] OF BOX 4.84 [ 23 ] 0.7 [ 258 ] SEE DETAIL C [ 209 ] [ 8 ].35 [ 34 ] A (4) 0. [ 257 ] 2.40 [ 35 ].94 [ 24 ].82 [ 2 ] 5.45 [ 393 ] 4.07 [ 03 ].90 [ 48 ] 8.35 [ 22 ] 5.05 [ 28 ].46 [ 37 ] B (2) LEFT & RIGHT SIDE.9 [ 23 ].46 [ 37 ] 4.26 [ 362 ] 5.95 [ 5 ].9 [ 23 ].5 [ 38 ].80 [ 46 ].65 [ 6 ] 9.0 [ 229 ].28 [ 7 ] 6.64 [ 69 ].80 [ 46 ].27 DIA [ 7 ].75 [ 9 ].25 DIA GROUND KNOCKOUT TOP & BOTTOM B (3) TOP & BOTTOM.25 [ 6 ] DETAIL C Dimensions shown in inches and millimeters ( ). Dimension shown accurate to + ¹ ₈ inch. KNOCKOUT CONDUIT CODE SIZE A (Concentric) B (Tangential) LINE SIDE LOAD SIDE WIRE BEND WIRE BEND 240V 3.02 (77) 5.36 (36) 600V 3.02 (77) 2.6 (66) Enclosure: Cold Rolled Steel.054 Thick (7 Gauge) Finish: ANSI Grey #6 Paint Building Technologies Division 5400 Triangle Parkway Norcross, GA KNOCKOUT CODE A B CONDUIT SIZE.75, 30A HD TY ENCLOSURE [9] [25].5,.75, [3] [9] [25] Subject to change without prior notice All rights reserved Printed in USA 2009 NOTES: MATERIAL: COLD ROLLED STEEL,.054 THICK (7 GUAGE) FINISH: ANSI GREY#6 PAINT Siemens is a registered trademark of Siemens AG. Product names mentioned may be trademarks or registered trademarks of their respective copanies. Specifications subject to change without notice.

93 500 Ocean Switchboards Electrical Submittals

94 s DRAWING TRANSMITTAL Switchboards JOB NAME: QUOTE: CONTENTS: Switchboards Switchboards Ocean 500 mellbx000_ _02_00_o00 Revised Submittal Package SECTION These drawings are for: Approval Record ENGINEER: SGM Engineers Inc. CONTRTOR: Islands Mechanical DISTRIBUTOR: World C Electric Supply : 0/9/205 08/6/2004 SUBMITTED BY: Your Brian Name Mello Sparky Want to B Electric Siemens Energy & Automation Western NW Freeway Way, #950 Suite Houston Jacksonville, TX FL Phone: (904) (73) Fax: (73) 69020

95 Sentron Switchboards Types SB, SB2, SB3 and RCIII General 7 Type SB Switchboard Pictorial Sentron Switchboards Type SB2 Switchboard Pictorial Whether the design is for a 240V, 400 ampere system; a 600V, 4000 ampere system; or something in between, Siemens Switchboards should be considered. Every aspect of design has been aimed at improving layout convenience, reducing installation costs, and minimizing the impact and cost of system changes. These switchboards provide the rugged construction and service flexibility necessary in systems for industrial plants, hirise complexes, hospitals, and commercial buildings, and are built to UL89 and NEMA PB2 standards. Type SB for Limited Space Applications The SB switchboard has been specifically designed for those applications where floor space is at a premium. The rear of all sections align so the switchboard can be installed against a wall. The SB contains frontconnected main protective devices and throughbus ratings up to 2000 amperes at 600V. Type SB2 for Increased Service and More Load Cable Room Siemens SB2 switchboard can have extra depth behind the vertical bus in each distribution section, and contains main protective devices and throughbus rated up to 4000 amperes at 600V. The rear of all sections align as a standard. Front and rear alignment is available as an option. Type SB3 For Custom Options The SB3 switchboard is available with main bus up to 6000 amperes. All sections are front and rear aligned. Options include, but are not limited to, incoming and outgoing busway, Siemens CESS System communications, and cold sequence utility C.T. Compartments. Type RCIII Rear Connected Switchboards The RCIII switchboard differs from the SB3 switchboard primarily in the mounting of the devices in the distribution section. The branch and feeder devices are individually mounted. Because of this method of mounting, access to outgoing cable terminations must be from the rear of the switchboard. Bus bar extensions from the feeder devices are run back to the rear of the unit for easy access. The front and rear of all sections align, designed for mounting away from the wall. RCIII switchboards will accommodate systems up to 6000 amperes, 600 volts maximum in any threephase threewire or threephase fourwire configuration. The main bus can be specified for 600 to 6000 ampere rating. Main devices and bus ties are available up to 5000 amperes, branch devices up to 2000 amperes. As with Type SB3, the RCIII switchboard can be of indoor or outdoor NEMA 3R construction. Switchboard Distribution Sections All standard distribution sections are 90 in. (2286) mm) high and 38 in. (965 mm) wide. Optional height of 70 in. (778 mm) and optional width of 32 in. (83 mm) and 46 in. (68 mm) are also available. SB distribution sections are 20 in. (508 mm) deep. For deeper sections, SB2 and SB3 switchboards must be chosen. SB2 distribution sections have a standard depth of 20 in. (508 mm) but can also be specified in depth of 28 in. (7 mm) and 38 in. (965 mm) when additional space is required. Rear access is required to make use of the additional depth of the SB2 and SB3 switchboards, and to provide access to bus connections, where required. SB2 may be installed against a wall. See Section of this Guide for a complete discussion of Siemens CESS system. CSI Section 6470 Siemens Electrical Products and Systems Specification Guide 99

96 Sentron Switchboards Types SB, SB2, SB3, and RCIII General 7 Sentron Switchboards RCIII Switchboard Fixed Mounted Devices RCIII Switchboard Drawout Mounted Devices Table 7. SB SB2 SB3 RCIII Main Bus Ampere Rating Connected Access to 2000 Front Front Yes to 4000 to 6000 to 6000 General Front Front Rear Front Rear Rear Install Against Wall? Yes No No Distribution section with two high 800 or 200A Vacu Break is 28 in. (7 mm) deep. Distribution section with two high bolted pressure switch is 38 in. (965 mm) deep minimum. Width depends on branch device. See page 28. Fixed mounted only. Drawout or fixed mounted. Table 7.2 Switchboard Type Switchboard Type SB SB2 SB3 RCIII Table 7.3 Switchboard Type SB SB2 SB3 RCIII Table 7.4 Switchboard Type SB SB2 SB3 RCIII Main Devices Mounting Individual Panel Yes Yes Yes Yes Yes Yes Yes No Individual Panel No Yes Yes Yes Front & Rear Rear Branch Devices Mounting YesRear Yes Yes No Molded Case Circuit Breaker Fixed A A A A A A A Molded Case Circuit Breaker Fixed 5200A 5200A A 5200A 2000A Vacu Break Fusible Switch Fixed A A A A A A A Vacu Break Fusible Switch Fixed 30600A A 30600A A 30600A 200A HCP Fusible Switch A A A A A A A HCP Fusible Switch A A A A A A Bolted Pressure Fusible Switch Fixed A A A A Bolted Pressure Fusible Switch Fixed A A Insulated Case Breaker LV Power Circuit Breaker A A A Fixed / Drawout Insulated Case Breaker A A Fixed / Drawout A Drawout LV Power Circuit Breaker A Drawout Distribution Sections Dimensions in inches (mm) Height Width Depth Access Std. Opt. Std. Opt. Std. Opt. Front 90 (2286) 38 (965) 32 or 46 (83 or 68) 20 (508) Front 90 (2286) 38 (965) 32 or (508) 28 or 38 (83 or 68) (7 or 965) 90 (2286) 70 (778) 38 (965) 32 or 46 (83 or 68) 90 (2286) 70 (778) 25, 32, 38, or 965) (635, 83, 32 or 46 (83 or 68) 20 (508) 28, 38, 48, or 58 (7, 965, 29 or 473) 48 or 58 (29 or 473) Siemens Electrical Products and Systems CSI Section 6470 Specification Guide

97 Sentron Switchboards Types SB, SB2, SB3, and RCIII Service Sections Bussed or NonBussed Pull Sections With Siemens switchboards, a nonbussed pull section, or a crossbussed pull section for underground feed can be selected. The unique crossbussed section permits cable to be run straight from underground to the bus bars at the top of the section. Nonbussed pull sections have openings for carrying the underground feed cables to the service section bus. Typical switchboards consist of a service section, and one or more distribution sections. Service sections can be fed directly from overhead by cable or busway. When fed from underground, a separate pull section is usually added. The service section is then fed from the adjacent underground pull section. Bolted Pressure Switches, VacuBreak and HCP Switches equipped for bottom feed will accept cable directly from underground into the service section. Service Section Options Utility Metering In addition to the main disconnect, the service section usually contains utility metering provisions. Hot metering (CT s on the line side of the main disconnect) is normal, but cold metering provisions (CT s on the load side of the main disconnect) can also be furnished. Whether hot or cold metering is required, the CT s provided by the utility company will be mounted in a completely separate compartment. The compartment will be built to utility company standards, with hinged doors and provisions for metering equipment provided by the utility. with the main disconnect. A separate section would be needed only if a large instrument or an unusual number of instruments were required. Main Disconnect Options Main protective devices can be mounted individually for quick access in an emergency. Switchboards will accommodate a variety of main protective devices. Selection depends on the characteristics of each electrical system. Type RL Power Circuit Breakers Power circuit breakers, amperes, 600 volts, with solidstate overcurrent trip devices offer storedenergy tripping plus optional ground fault protection, selective tripping, and a broad range of accessories. Type RL, LV Power Circuit Breaker Type SB Encased Systems Breakers Insulated case circuit breakers, amperes, 600 volts, with solidstate trip devices, offer stored energy tripping plus optional ground fault protection, selective tripping, and a broad range of accessories. General Extra Heavy Duty Breakers Highinterruptingcapacity thermalmagnetic breakers, amperes, 600 volts, provide increased protections where high available fault currents exist, with the same convenience and accessory feature offered in standard interrupting capacity breakers. SolidState Sensitrip Full function breakers amperes, 600 volts, have solidstate circuitry which assures minimal damage through the quick interruption control of fault currents, and includes shorttime delay and ground fault trip for branch device coordination. Fuseless Current Limiting Molded case breakers, amperes, 600 volts, with thermalmagnetic protection provide coordinated protection for branch devices and circuits where extremely high fault currents are available. Solid state current limiting molded case breakers also available in ratings of A. Fusible Switches VacuBreak Fusible Switches, amperes, 600 volts, provide protection, coordination with branch protective fusible switches, and application flexibility in systems where high available fault currents are encountered. HCP Fusible Switch HCP switches, amperes, 600 volts, combine economy with extremely high interrupting capacity in conjunction with Class J and Class L fuses. Has visible contacts and optional auxiliary contacts, shunt trip and ground fault relaying. Customer Metering Compartment Customer Metering The service section often provides space for many user instrument requirements. Ammeters, voltmeters, and their associated selector switches can be mounted in the service section along Type SB Encased Systems Breaker Molded Case Circuit Breakers Heavy Duty Standard interrupting capacity, thermalmagnetic breakers, amperes, 600 volts, provide protection that allows immediate restoration of power for normal system requirements. A wide range of accessory options is available, including shunt trip, motor operator, auxiliary switches, alarm switches, and others. Bolted Pressure Switches Bolted pressure switches, amperes, 480 volts, combine economy with extremely high interrupting capacity in conjunction with Class L fuses. Options include short trip, ground fault relaying, and a wide range of other accessories. Ground Fault Relays All main protective devices, except VacuBreak fusible switches, can be equipped with ground fault relays to comply with the National Electrical Code (Section 23095) ground fault protection requirements. CSI Section 6470 Siemens Electrical Products and Systems Specification Guide 0

98 Sentron Switchboards FrontConnected Construction Types SB, SB2, and SB3 General 7 Sentron Switchboards Bus Bars Design Siemens switchboard bus bars are available in standard tinfinished aluminum or optional silverfinished copper. Standard bus is sized to limit heat rise to 65 C above an ambient temperature of 40 C maximum in accordance with UL 89. As an option, conductor material can be sized according to density limits, based on bus material. The applicable limits are: Aluminum 750 amperes / sq. in. Copper 0 amperes / sq. in. In accordance with NEMA and UL 89 standards, at each distribution section, the throughbus capacity is reduced as load is taken off. The throughbus is tapered to a minimum of onethird the ampacity of the incoming service mains. If required by special system characteristics, switchboards can be supplied with optional fullcapacity bus; i.e., the ampacity of the throughbus remains at the full ampacity of the main throughout the switchboard. Splice Plates All splice plates can be accessed, bolted, and unbolted from the front of the switchboard to make connection of adjacent sections easy. Each splice plate is attached with one /2inch grade 2 bolt, and a 2inch or 3inch Belville washer on each end. This reduces installation time while increasing contact pressure at the joint. To make installation and servicing of the splice plates easier, all phase and neutral throughbusses are stacked one above the other, eliminating the need to stuff bolts in between bus bars that are stacked one behind the other in the same horizontal plane. Disconnect Links in Service Entrance Equipment In switchboard service sections to be used as service entrance equipment on Ø3W and 3Ø4W systems, provisions must be included to isolate the neutral bus from the grounded service neutral. This removable link gives you the ability to check branch neutral continuity on the load side of the main disconnect. To maintain a service ground to the switchboard frame while the neutral link is removed, a bonding strap is connected from the switchboard frame to the neutral bus on the line side of the removable link. UL and SUSE (suitable for use as service entrance) labels will be furnished on Bus Bars and Lug Construction service sections specified for service entrance. Cable Terminals Screw mechanical connectors (lugs) are provided as standard equipment on all devices. However, compression connectors are available as an option on all main lugs, main bolted pressure switches, main power circuit breakers, main molded case, main fusible devices, and main insulated case circuit breakers. Splice Plates Screw Mechanical Connectors Distribution Sections Siemens switchboard distribution sections are engineered for accessibility and expanded use. For expanded wiring room and exceptional accessibility, generous top and bottom gutters have been created by locating throughbus in the rear center of the distribution section. In cable entrance sections, no obstructions are less than 8 in. (203 mm) above the floor, and no live bus bars are located less than 0 in. (254 mm) off the floor. So there is plenty of room to run cables into the distribution section for connections. Standard bolted gutter covers give complete access to load conductors. Optional hinged gutter covers can be furnished where quick access to load connectors is desired. Heavy channels form a rigid ring at the base and top of each section, and heavy gauge structural members are used for the vertical corner posts eliminating encroachment of additional bracing into the top and bottom gutter areas. To provide additional room for top load cable routing where needed, pull box extensions are available in heights of 0,5, 20, 25, and 30 in. (254, 38, 508, and 762 mm) to mount on any standard distribution section. Top plates on all sections are easily removed in the field for drilling, punching, and cutting conduit entry holes. Because all distribution sections can accommodate any combination of panelmounted branch devices, including molded case circuit breakers, VacuBreak fusible switches, and motor starters, future system modifications are easier to handle without adding switchboard sections. To make additional distribution sections easier to install when they are necessary, the throughbus in each distribution section is extended, and the end is predrilled to accept splice plate bolts. To add a section to an existing switchboard, set the new section flush against the side of the existing distribution section, and bolt together the bus bar splice plates. 02 Siemens Electrical Products and Systems CSI Section 6470 Specification Guide

99 Sentron Switchboards Front Connected Construction Types SB, SB2, and SB3 General Distribution Sections (cont d) Distribution sections of SB, SB2, and SB3 switchboards can accept any combination of molded case circuit breakers and fusible switches. If the system calls for a mixture of these devices, there is the option of grouping the devices in logical patterns within a single section. A separate section is not needed for each type of device. And because all types of devices can be put in a single section, the total number of sections required in the system can be reduced. For future modifications, devices can be added or replaced as the system grows and changes. If a motor starter has to be added after the installation, an entire switchboard section need not be provided to house it. It can be installed in any distribution section with available unit space. Operating Temperatures All distribution sections contain louvers both at the top and bottom to assure cool operation in accordance with UL Standard 89. Bus Location All throughbus to adjoining sections is located in the rear center of the distribution section. This design provides large, unobstructed wiring gutters at the top and bottom of each section. Wiring takes less time and costs less to install. Motor Starter Switchboards Type SB3 switchboards offer a complete line of groupmounted starters that provide a compact and convenient method of combining power distribution and control circuits in one location. Motor starter units are available with fully bussed circuit breaker or fusible Vacu Break units, factorywired on the load side to full voltage, nonreversing starters to reduce installation time. Type A wiring is standard without terminal blocks. The fusible switch, circuit breaker, or starter unit is factory wired; however, control and load cabling is connected by the installer directly onto the starter. Type B wiring is available as an option. Control wiring is brought out to terminal blocks and identified. Starter load terminals are conveniently located near the vertical wiring gutters and adjacent to control terminal blocks. No wiring external to the unit is furnished. Type C wiring is not available in motor starter switchboards. Front Connected Switchboards, Type SB CSI Section 6470 Siemens Electrical Products and Systems Specification Guide 03

100 SWITCHBOARD DRAWINGS

101 90.00" 80.00" 70.00" 60.00" 50.00" 40.00" 30.00" 20.00" 0.00" 0.00 Supply =600 Section =600 Neutral =600 SUSE UL SIEMENS SPD 8.75 # SECTION# EST. WEIGHT: A AL PER Ø & N,600 A AL PER Ø & N,600 A/3 (5)600MCM LUGS PER Ø & N ( )#6300 MCM GRD LUG(s) Ocean 500 P.O. CUST. WORLD ELECTRIC SUPPLY INC CONTR CONSLT ISLANDS MECHANICAL CONTRTOR INC TIE BY ENG. LOC. DESIGNATION mellbx METER CENTER C MAIN BREAKER mellbx000_ _02_00_o OF BOTTOM ONLY CONDUIT NOTES DIA. 2.9 TYPICAL BOLTDOWN HOLE PROVISION FOR CUBICLE BOTTOM EH SECTION INCOMING LUGS LOAD LUGS BARRIER NEUTRAL DISCONNECT LINK CONSTRUCTION :SWITCHBOARD IS BUILT AND LELED PER UL 89 IN EFFECT. INCOMING :AMPERES: 600 SERVICE :SYSTEM VOLTAGE: 208Y/20 3Ø4W Wye INTERRUPTING :THE SHORT CIRCUIT INTERRUPTING CAPILITY IS 65,000 RATING :RMS SYMMETRICAL AMPERES AT 208 VOLTS BASED ON THE LOWEST SHORT CIRCUIT CURRENT RATING OF THE INDIVIDUAL OR SERIES RATED COMBINATION DEVICES INSTALLED AT TIME OF MANUFTURE OF BUSSING STRUCTURE. THE BUSSING STRUCTURE IS CONSTRUCTED TO WITHSTAND FAULTS OF 65,000 RMS SYMMETRICAL AMPERES. ENCLOSURE :ENCLOSURE IS TYPE NEMA FOR INDOOR APPLICATION. EXTERIOR :ANSI 6 LIGHT GREY PAINT. TERMINATIONS :TERMINATIONS ARE CESSIBLE FROM THE FRONT. BUS BARS :TIN PLATED ALUMINUM BUS BARS SIZED ON BASIS OF 65 C MAXIMUM TEMPERATURE RISE. BUS BARS :THE GROUND BUS IN THIS SWITCHBOARD IS Aluminum SIZED PER UL 89 OR GREATER. NAMEPLATE :NAMEPLATES ATTHED WITH SCREWS. BONDING STRAP CONCEALED HINGES BARREL LOCK PROVISION SEALING DEVICE S H STANDARD CURY SEM3 METER HIGH CURY SEM3 METER BREVIATIONS 'UL' INDICATES THAT THE MARKED SWITCHBOARD SECTION COMPLIES WITH ALL APPLICLE UNDERWRITERS LORATORIES STANDARDS AND IS IDENTIFIED WITH A UL LEL. 'SUSE' INDICATES THAT THE MARKED SWITCHBOARD SECTION IS SUITLE ONLY FOR USE AS SERVICE ENTRANCE EQUIPMENT. 'SPD' INDICATES SURGE PROTECTIVE DEVICE 0 mellbx NO. REVISIONS DRAWN BY: JOB S.O. Norcross, Georgia MFG. LOC. DWG. FILE DWG. NO. SHEET REV.

102 90.00" 80.00" 70.00" 60.00" 50.00" 40.00" 30.00" 20.00" 0.00" 0.00 Supply =600 Section =600 Neutral =600 SUSE UL SIEMENS SPD 8.75 # SECTION# EST. WEIGHT: A AL PER Ø & N,600 A AL PER Ø & N,400 A/3 (5)750MCM LUGS PER Ø & N ( )#6300 MCM GRD LUG(s) Ocean 500 P.O. CUST. WORLD ELECTRIC SUPPLY INC CONTR CONSLT ISLANDS MECHANICAL CONTRTOR INC TIE BY ENG. LOC. DESIGNATION mellbx METER CENTER E MAIN BREAKER mellbx000_ _02_00_o0020 OF BOTTOM ONLY CONDUIT NOTES DIA. 2.9 TYPICAL BOLTDOWN HOLE PROVISION FOR CUBICLE BOTTOM EH SECTION INCOMING LUGS LOAD LUGS BARRIER NEUTRAL DISCONNECT LINK CONSTRUCTION :SWITCHBOARD IS BUILT AND LELED PER UL 89 IN EFFECT. INCOMING :AMPERES: 600 SERVICE :SYSTEM VOLTAGE: 208Y/20 3Ø4W Wye INTERRUPTING :THE SHORT CIRCUIT INTERRUPTING CAPILITY IS 65,000 RATING :RMS SYMMETRICAL AMPERES AT 208 VOLTS BASED ON THE LOWEST SHORT CIRCUIT CURRENT RATING OF THE INDIVIDUAL OR SERIES RATED COMBINATION DEVICES INSTALLED AT TIME OF MANUFTURE OF BUSSING STRUCTURE. THE BUSSING STRUCTURE IS CONSTRUCTED TO WITHSTAND FAULTS OF 65,000 RMS SYMMETRICAL AMPERES. ENCLOSURE :ENCLOSURE IS TYPE NEMA FOR INDOOR APPLICATION. EXTERIOR :ANSI 6 LIGHT GREY PAINT. TERMINATIONS :TERMINATIONS ARE CESSIBLE FROM THE FRONT. BUS BARS :TIN PLATED ALUMINUM BUS BARS SIZED ON BASIS OF 65 C MAXIMUM TEMPERATURE RISE. BUS BARS :THE GROUND BUS IN THIS SWITCHBOARD IS Aluminum SIZED PER UL 89 OR GREATER. NAMEPLATE :NAMEPLATES ATTHED WITH SCREWS. BONDING STRAP CONCEALED HINGES BARREL LOCK PROVISION SEALING DEVICE S H STANDARD CURY SEM3 METER HIGH CURY SEM3 METER BREVIATIONS 'UL' INDICATES THAT THE MARKED SWITCHBOARD SECTION COMPLIES WITH ALL APPLICLE UNDERWRITERS LORATORIES STANDARDS AND IS IDENTIFIED WITH A UL LEL. 'SUSE' INDICATES THAT THE MARKED SWITCHBOARD SECTION IS SUITLE ONLY FOR USE AS SERVICE ENTRANCE EQUIPMENT. 'SPD' INDICATES SURGE PROTECTIVE DEVICE 0 mellbx NO. REVISIONS DRAWN BY: JOB S.O. Norcross, Georgia MFG. LOC. DWG. FILE DWG. NO. SHEET REV.

103 500 Ocean TVSS Electrical Submittals

104 s DRAWING TRANSMITTAL JOB NAME: QUOTE: CONTENTS: TVSS TVSS Equipment Ocean 500 mellbx000_ _02_00_o00 Revised Submittal Package SECTION These drawings are for: Approval Record Sparky ENGINEER: SGM Engineers Inc. CONTRTOR: Islands Mechanical DISTRIBUTOR: World C Electric Supply : 0/9/205 08/6/2004 Want to B Electric SUBMITTED BY: Your Brian Name Mello Siemens Energy & Automation Western NW Freeway Way, #950 Suite Houston Jacksonville, TX FL Phone: (904) (73) Fax: (73) TVSS Equipment TVSS

105 Meter Center Surge Kits TPS3 03 Type Surge Protective Device (SPD) Mounts External to Electrical Distribution Equipment Features: UL 449 3rd Edition SPD