Power Mod. Standard Tapboxes.

Transcription

1 Power Mod Standard tapbox modules (type WTB) are designed for versatility, space savings, and flexibility. Features include: J QuickSystem features J Standard compression lug capability J Invertibility: devices can be rotated to accommodate the desired incoming feed direction J 750 kcmil AL wire options for most models J 100K AIC standard for all models J Broad ampacity ratings from 400 to 1600 Amps J Line and load capability- service entrance and sub feed rated Standard Tapbox quick reference J A J 1200A thru-bus rating J UL Standard # UL67 J UL file # E27100 J AIC rating (100K AIC) J Voltage - Single phase 120/240V AC max - Three phase 240V AC max J All swing latches and rivets are stainless steel. J NEMA 3R rated J G90 galvanized steel J ANSI 61 paint Standard Tapboxes

2 Features Standard compression lug capability 750 kcmil AL wire options. Neutral lug with removable disconnect link Remove for subfeed use. 4 hub openings Siemens/Landis & Gyr HD type hubs 7-2

3 Features Invertibility Devices can be rotated to accommodate the desired incoming feed direction Connecting cross bus rated 1200 Amps Siemens exclusive feature QuickConnect QuickConnect reduces bussing connections from many to one- ensuring a single reliable connection instead of multiple connections. Mounting ear Pivot factory installed mounting ears to minimum or maximum position to provide additional stability when mounting equipment onto wall. QuickTorque Eliminates the need for time consuming torque readings, this breakaway nut provides the correct indication of torque of the QuickConnect. When tightened, the outer head twists off at the proper torque for connection, leaving a single nut for future maintenance. Siemens exclusive feature QuickBolt QuickBolt eliminates the requirement to line up mechanical connectionsinstead bolts remain retracted until the openings lineup - allowing the bolts to protrude through automatically. Springs push the bolts through and provide positive pressure to keep bolts in place while wingnuts are attached and tightened. Siemens exclusive feature QuickRoll QuickRoll eliminates the typical metal brackets for mounting modules to the wall. Instead of metal scraping metal QuickRoll allows the module to glide down the mounting rail via a durable nylon wheel inside mounting bracket. 7-3

4 Catalog numbers Tap box modules: 1-phase, 3-wire WN, 120/240V AC, 100k AIC c Catalog number Ampere rating Service feed b Dimensions (inches) a Height Width Depth Line side connections e (lugs not included) KO drawing no. WTB1400CU 400 OH/UG set of 2 studs T-1 WTB1800CU 800 OH/UG WTB11200CU 1200 OH/UG sets of 2 studs T-2 T-3 WTB11600CU d 1600 OH/UG sets of 2 studs T-4 Tap box modules: 3-phase, 4-wire SN, 240V AC Max., 100k AIC c Catalog number Ampere rating Service feed b Dimensions (inches) a Height Width Depth Line side connections e (lugs not included) KO drawing no. WTB3400CU 400 OH/UG set of 2 studs T-1 WTB3800CU 800 OH/UG T-2 2 sets of 2 studs WTB31200CU 1200 OH/UG T-3 WTB31600CU d 1600 OH/UG sets of 2 studs T-4 a Dimensions shown are representative of outside box dimensions and do not include allowances for mounting bumps, hubs, or hardware protrusions. b Module is invertible- rotate device to point hub openings to appropriate feed direction. c QuickConnect not included. If used for load side application an additional coupler must be ordered. d 1200 Amp maximum feed per side- must be used as a center fed main. e Lugs not included. Refer to page 7-5 for lug size options. 7-4

5 Lug selector catalog numbers Tap box lug kits Wire Size 500 kcmil 600 kcmil 750 kcmil 1 Phase Amperage # Conductors n/a LK11600N2 n/a 2 LK12500N2 n/a n/a n/a LK12600N2 LK12750N2 3 LK13500N2 n/a n/a n/a n/a LK13750N2 4 LK14500N2 n/a n/a n/a LK15600N2 LK15750N2 3 Phase n/a LK31600N2 n/a 2 LK32500N2 n/a n/a n/a LK32600N2 LK32750N2 3 LK33500N2 n/a n/a n/a n/a LK33750N2 4 LK34500N2 n/a n/a n/a LK35600N2 LK35750N2 7-5

6 Knockout diagrams T-1 WTB1400CU WTB3400CU T-2 WTB1800CU WTB3800CU 7-6

7 Knockout diagrams T-3 WTB11200CU WTB31200CU T-4 WTB11600CU WTB31600CU 7-7

8 Catalog number logic example W TB C U Enclosure Incoming feed W = Outdoor Amperage U = 100K AIC rated unit Device 400 TB = Tap Box Phase 1 = Single Phase 3 = Three Phase Incoming feed C = Top and bottom feed construction Siemens Energy & Automation, Inc. Industry Sector 3333 Old Milton Parkway Alpharetta, GA info.sea@siemens.com Subject to change without prior notice Order No.: RPFL-STAPB-0409 Printed in USA 2009 Siemens Energy & Automation, Inc. The information provided in this brochure contains merely general descriptions or characteristics of performance which in case of actual use do not always apply as described or which may change as a result of further development of the products. An obligation to provide the respective characteristics shall only exist if expressly agreed in the terms of contract. All product designations may be trademarks or product names of Siemens AG or supplier companies whose use by third parties for their own purposes could violate the rights of the owners.