Selection and application guide

Transcription

1 Selection and application guide For use in Colorado and Wyoming Meter Mounting Equipment

2

3 Meter Mounting Equipment Table of Contents Service Rating Positions Terminals Page Introduction and General Information Residential, 1 phase, 3 wire 135A 1 4 & 5 4 Residential, 1 phase, 3 wire 200A 1 4 & 5 5 Residential, 1 phase, 3 wire, side wired 200A 1 4 & 5 6 Residential, 1 phase, 3 wire, Horizontal Gang 100/150A & 5 7 Residential, 1 phase, 3 wire, Horizontal Gang 200A & 5 8 Commercial/Industrial, 1 and 3 phase, 3 wire, Type MQ 200A 1 4, 5 & 7 9 Commercial/Industrial, 1 phase, 3 wire, Polyphase, 3 or 4 wire 200A 1 4, 5 & 7 10 Commercial/Industrial, 1 phase, 3 wire, Polyphase, 4 wire 320A 1 4, 5 & 7 11 Commercial/Industrial, 1 phase, 3 wire, Polyphase, 4 wire 320A Residential, 1 phase, 3 wire, Type K-4 400/480A Commercial/Industrial, Polyphase, 3 or 4 wire, Type K-7 400/480A Type PTS, Transformer-Rated with Test Switch Provision Type HQ-T, Transformer-Rated Type HQ-TS, Transformer-Rated with Test Switch Provision Residential, Meter Main, 1 phase, 3 wire 100, 125, 150 & 200A 1 4 & 5 18 Residential, Meter Combination, 1 phase, 3 wire 200/400A EUSERC Type BY Meter-Main Combinations 100/320A 1 4, 5 & 7 20 Commercial, EUSERC Type BY Meter-Main Combinations Commercial, EUSERC Type BY Meter-Load Center Combinations Circuit Breakers Air Conditioning Disconnects Spa Panels Connector lugs Accessories Terms of Sale, Meter Mounting Device Applications Represented by: I-PRO 6301 Federal Blvd. Suite 201 Denver, CO Phone: (720)

4 Meter Mounting Equipment The standard for quality For more than 50 years, meter mounting devices that are now manufactured under the Talon Brand, have been known throughout the industry for innovation and quality. From our proprietary K-Base to our heavy duty HQ lever bypass socket, Talon products are known throughout the industry for innovation and quality. Talon meter sockets are built for safety, ease of installation, and long term quality. That s why we use stainless steel hardware, polyester powder coat paint for long lasting protection, and Type G-90 galvanized steel or 3003 grade aluminum for all of our enclosures. It s also why we use an all-copper current path in our commercial sockets. All of this adds up to why utilities, OEM s, and contractors recognize Talon meter mounting devices across the country as the leader in design, quality, and workmanship. Quality is the reason many utilities and electricians specify Talon products. Talon products - the standard for quality and design. HQ-5 block assembly The standard for quality. General information Materials: 16 gauge, galvanized steel, G gauge, galvanized steel, G gauge, aluminum 12 gauge, aluminum Enclosures: NEMA 3R Finish: Steel - Light gray, baked on powder polyester Aluminum - Mill finish Latches: All swing latches are stainless steel Block material: AS/AT, MQ, HQ, K-4 and K-7 - Glass reinforced polyester Terminals: AS/AT - Tin-plated aluminum extrusions 6061-T6 MQ, HQ, - Tin-plated copper Standards: Products cataloged herein meet or exceed the following standards: UL 486B, UL 414, NEMA 250, ANSI C12.7 Florida Meter Group requirements Voltage: All devices are rated at 600V AC Type K-4 rated at 300V AC 2

5 Meter Mounting Equipment Meter socket terminology Maximum and continuous ampacity UL and NEMA standards allow most electrical devices to be tested at one amp level ( continuous ), then allowed 125% rating as maximum. For example, a 400 Amp socket may either mean 400 Amps continuous (K-4) or 400A Max, 320A continuous which is also made by most competitors. Wire sizes - ampacity Connectors accept a fairly wide variety of wire sizes. On the AT socket, a 350 kcmil connector accepts conductors from #6 up to 350 kcmil. The NEC specifies the ampacity of each wire size and type, also taking into account how the wire is installed in conduit. Lay-in and stud terminals Lay-in terminals are fixed and may not be modified in the field to accept other wire sizes or parallel conductors. terminals accept either lugs (see Product Schedule 497) or compression fittings (not available from Talon). Common uses for studs include where the field wiring may be either single or parallel. Terminals may be mixed on the line and load sides, e.g. stud on the line and lay-in on the load side. Ringless/Ring style Ring-type is an older, vanishing concept requiring a sealing ring. Talon recently added tooling to build this type of socket for the few remaining utilities that require them. In ringless design, the seal is made not on a sealing ring but using the cover and swing latch as the point of sealing. Overhead/Underground Sockets for UG service are usually wider in order to provide space for the conductors to loop around the block to the top connectors. Since more material is required in the enclosure, UG sockets are more expensive than OH sockets. Quite popular are combination units (OH/UG) which may be used in either service, and require a cover plate if used with UG feed. Hubs and cover plates Top of socket with hub opening has a flanged lip to keep out moisture. This requires a hub or cover plate to close. There are two sizes of openings: small for conduit hubs with sizes of 1, 1-1/4, 1-1/2, 2, and 2-1/2 ; and large for conduit hubs with sizes 3, 3-1/2, and 4. See Product Schedule 499. Talon hub openings conform to ANSI C12.7 specs and are interchangeable with other socket manufacturers, but are not interchangeable with panel board style hubs. Bypass types A self-contained meter completes the circuit between the utility and the customer. In order to change the meter, the circuit must be broken, turning off the power to the customer. This is not acceptable in commercial establishments, or in many other types of services. A bypass allows a parallel path for the current flow, unmetered, while the meter is pulled. Types are: a) Lever-operated jaw release, also known as jaw clamping lever bypass (Talon type HQ). The best, because the meter cannot accidentally be pulled unless the bypass is engaged. Pulling the meter would also be a major safety hazard if there is a 480V installation and/or a large load in place, as the meter would then act as a switch, and cause arc. b) Lever-operated non-jaw release (Talon type MQ). Lever bypasses the meter, but the meter may be removed with the bypass open. c) Horn bypass (option on residential sockets). Tangs on line and load connectors allow for jumper leads to be fitted over them before the meter is pulled. d) Manual bypass (K-4, K-5, K-7) uses separate links, which are clamped onto special studs before the meter is removed. K-7 also uses a rotating link type bypass. e) Other types not made by Talon include: slide links, screw type, and automatic circuit closers. 3

6 135A Continuous Meter Mounting Equipment Residential ab, 4 & 5 terminal for 1 phase, 3 wire Residential - 135A - 4 & 5 Jaw - Ringless Cont. amp rating Service Connectors Line Load Dimensions (in.) W H D Hub opening Bypass No. of term. Encl. matl. 135 OH/UG #14-2/0 #14-2/ Opening None 4 Steel UAT111-0G 135 OH/UG #14-2/0 #14-2/ " Hub Inst None 4 Steel UAT111-BG 135 OH/UG #14-2/0 #14-2/ Opening Horn 4 Steel UAT111-0PQGd 135 OH/UG #14-2/0 #14-2/ CL. Plate None 4 Steel UAT121-XGSPc 135 OH/UG #14-2/0 #14-2/ Opening None 4 Steel UAT121-0GWRc Approved for PacifiCorp 135 OH #14-2/0 #14-2/ Hub Inst Horn 4 Steel UAT121-BGWRc 135 UG #14-2/0 #14-2/ blank Horn 4 Steel UAT121-PGWRc a All units include a quad neutral. b 5th terminal kit for field installation: H See accessories page in back. c Device has a ring-style cover. Sealing ring included. d Sockets with QG suffix are equipped with 2 ground lugs. UAT1X1 UAT111-0G Knockouts (inches): g: 1/4 L: 1/2, 3/4,1,1-1/4,1-1/2 N: 3/4,1,1-1/4,1-1/2, 2 R: 1,1-1/4,1-1/2, 2 : x2.750 HUB OP UAT111-0PQG 4

7 200A Continuous Meter Mounting Equipment Residential ab, 4 & 5 terminal for 1 phase, 3 wire Cont. amp rating Service Connectors Line Load Dimensions (in.) W H D Hub opening Bypass No. of term. 200 OH #6-350 kcmil #6-350 kcmil Opening None 4 UAT317-0G 200 OH/UG #6-350 kcmil #6-350 kcmil CL Plate None 4 UAT417-XG 200 OH/UG #6-350 kcmil #6-350 kcmil Opening None 4 UAT417-0G 200 OH #6-350 kcmil #6-350 kcmil Opening Horn 4 UAT317-0PQGd 200 OH #6-350 kcmil #6-350 kcmil Opening Horn 4 UAT317-0PZAe 200 OH #6-350 kcmil #6-350 kcmil Opening Horn 4 UAT317-0PGPf 200 OH/UG #6-350 kcmil #6-350 kcmil Opening Horn 4 UAT417-0PQGd 200 OH/UG #6-350 kcmil #6-350 kcmil CL Plate Horn 4 UAT417-XPQGd 200 OH/UG #6-350 kcmil #6-350 kcmil CL Plate None 4 UAT427-XGc 200 OH/UG #6-350 kcmil #6-350 kcmil CL Plate None 4 UAT427-XGSPc Approved for PacifiCorp 200 OH #6-350 kcmil #6-350 kcmil Opening Horn 4 UAT327-0GWRc Approved for Colorado Springs Utilities 200 OH/UG #6-350 kcmil #6-350 kcmil CL Plate Horn 5 UAT417-XVZg a All units include a quad neutral. b 5th terminal kit for field installation: H See accessories page in back. c Device has a ring-style cover. Sealing ring included. d Sockets with QG suffix are equipped with 2 ground lugs. e 7/16 barrel lock KO and bracket provided. f 7/8 barrel lock KO and bracket provided. g 5th terminal installed at 9:00 position. Residential - 200A - 4 & 5 Jaw - Ringless UAT417 UAT417-XPQG UAT417-XG UAT317 Knockouts (inches): g: 1/4 A: 1/2 S: 1,1-1/4,1-1/2, 2, 2-1/2 AB: 1/4, 1/2, 7/8 : x2.750 HUB OP UAT317-0PQG 5

8 200A Continuous Meter Mounting Equipment Residential a, Side Wired, 4 terminal for 1 phase, 3 wire Cont. amp rating Service Connectors Line Load Dimensions (in.) W H D Bypass Meter Opening No. term. 200 UG #6-350 kcmil #6-350 kcmil None Left 4 UAS817-PG 200 UG #6-350 kcmil #6-350 kcmil Horn Left 4 UAS817-PPGPc Residential - 200A - 4 Jaw - Side Wired 200 UG #6-350 kcmil #6-350 kcmil Horn Left 4 UAS817-PPZAb 200 UG #6-350 kcmil #6-350 kcmil None Right 4 UAS877-PG 200 UG #6-350 kcmil #6-350 kcmil Horn Right 4 UAS877-PPGPc 200 UG #6-350 kcmil #6-350 kcmil Horn Right 4 UAS877-PPZAb a 5th terminal kit for field installation: H b 7/16 barrel lock KO with bracket provided. c 7/8 barrel lock KO with bracket provided. See accessories page in back. UAS877 UAS877-PPZA UAS817 Knockouts (inches): AC: 1/4, 1/2 AD: 1-1/4, 1-1/2, 2, 2-1/2, 3 6

9 100/150A Position Meter Mounting Equipment Residential abc, Horizontal Gang, 4 terminal for 1 phase, 3 wire No. pos. Cont. amp rating Connectors Line Connectors Load Dimensions (in.) W H D Hub openinig Encl. matl #6-350 kcmil #14-2/ Opening Steel UA2311-0G #6-350 kcmil #14-2/ Opening Steel UA3311-0G #6-350 kcmil #14-2/ Opening Steel UA4311-0G #6-350 kcmil #14-2/ Opening Steel UA2311-0PQGd #6-350 kcmil #14-2/ Opening Steel UA3311-0PQGd #6-350 kcmil #14-2/ Opening Steel UA4311-0PQGd #6-350 kcmil #6-350 kcmil Opening Steel UA2313-0G #6-350 kcmil #6-350 kcmil Opening Steel UA3313-0G #6-350 kcmil #6-350 kcmil Opening Steel UA4313-0G a Unit is supplied with a ground lugs. b All sockets are suitable for either overhead or underground feed. c 5th terminal kit for field installation: H See accessories page in back. d Sockets with QG suffix are equipped with 2 ground lugs. Residential - 100/150A - 4 Jaw - Horizontal gang Knockouts (inches): S: 1,1-1/4,1-1/2, 2, 2-1/2 AC: 1/4, 1/2 : x2.750 HUB OP UA2311-0PQG with H installed UA2311/2313 UA3311/3313 UA4311/4313 7

10 200A/Position Meter Mounting Equipment Residential abc, Horizontal Gang, 4 & 5 terminal for 1 phase, 3 wire Residential - 200A/position - 4 & 5 Jaw - Horizontal Gang No. pos. Cont. amp per pos. Connectors Line Load Dimensions (in.) W H D Hub opening Bypass No bypass, ground lug included #1/0-600 kcmil #6-350 kcmil HD Opening None UA2717-YG #1/0-600 kcmil #6-350 kcmil HD Opening None UA3717-YG (2) #1/0-600 kcmil #6-350 kcmil HD Opening None UA4719-YG (2) #1/0-600 kcmil #6-350 kcmil (2) HD Openings None UA5719-KG (2) #1/0-600 kcmil #6-350 kcmil (2) HD Openings None UA6719-KG Horn bypass, two ground lugs included #1/0-600 kcmil #6-350 kcmil HD Opening Horn UA2717-YPQGd #1/0-600 kcmil #6-350 kcmil HD Opening Horn UA3717-YPQGd (2) #1/0-600 kcmil #6-350 kcmil HD Opening Horn UA4719-YPQGd (2) #1/0-600 kcmil #6-350 kcmil (2) HD Openings Horn UA5719-KPQGd (2) #1/0-600 kcmil #6-350 kcmil (2) HD Openings Horn UA6719-KPQGd a All units are equipped with a ground lug. b All sockets are suitable for either overhead or underground feed. c 5th terminal kit for field installation: H See accessories page in back. d Sockets with QG suffix have 2 ground lugs. UA2716-YG UA27X6 UA37X7 Knockouts (inches): X: 1-1/4, 1-1/2, 2, 2-1/2 AC: 1/4, 1/2 AD: 1-1/4, 1-1/2, 2, 2-1/2, 3 HD: x4.281 HUB 0P UA57X9 UA47X9 UA67X9 8

11 200A Meter Mounting Equipment Commercial/Industrial abc, Type MQ, 4, 5 & 7 terminal for 1 & 3 phase, 3 wire Cont. amp rating Service Connectors Line Load Dimensions (in.) W H D Hub opening No. of term. Bypass 200 OH #6-350 kcmil #6-350 kcmil Opening 4 Lever OH #6-350 kcmil #6-350 kcmil Opening 4 Lever e 200 OH #6-350 kcmil #6-350 kcmil Opening 5 Lever d 200 OH/UG #6-350 kcmil #6-350 kcmil Cl. Plate 4 Lever OH/UG #6-350 kcmil #6-350 kcmil Cl. Plate 7 Lever N OH/UG #6-350 kcmil #6-350 kcmil Cl. Plate 5 Lever d 200 OH/UG #6-350 kcmil #6-350 kcmil Cl. Plate 7 Lever BUf a Type MQ bypass mechanism is lever-operated, non-jaw clamping. b Disconnect sleeves should not be used with these devices. c 5 terminal devices are not for use with 3 phase, 3 wire service. d Type MQ-5 devices have 5th terminal in the 9 o clock position. e Ground lug provided. f 7/8 Barrel Lock KO with bracket installed. Commercial/Industrial - 200A - 5 Jaw - Type CQ 4060X Knockouts (inches): g: 1/4 B: 1/2, 3/4 S: 1,1-1/4,1-1/2, 2, 2-1/2 4020X AI: 1, 1-1/4, 1-1/2, 2, 2-1/2, 3 : x2.750 HUB OP A: 1/2 AF: 1, 1-1/2, 2, 2-2/2, 3 AG: 3/4, 1, 1-1/4, 2, 2-1/2,

12 200A Meter Mounting Equipment Commercial/Industrial ab, Type HQ, 4, 5 & 7 terminal for 1 phase, 3 wire, polyphase, 3 or 4 wire, Wye or Delta Commercial/Industrial - 200A - 4, 5 & 7 Jaw - Type HQ Cont. amp Connectors Dimensions (in.) Hub No. of rating Service Line Load W H D opening Term. 200 OH #6-350 kcmil #6-350 kcmil Opening Ffi 200 OH #6-350 kcmil #6-350 kcmil Opening Fi 200 OH #6-350 kcmil #6-350 kcmil Opening cd 200 OH #6-350 kcmil #6-350 kcmil Opening QGe 200 OH #6-350 kcmil #6-350 kcmil Opening QGe 200 OH/UG #6-350 kcmil #6-350 kcmil Cl. Plate OH/UG #6-350 kcmil #6-350 kcmil Cl. Plate OH/UG #6-350 kcmil #6-350 kcmil Cl. Plate QGe 200 OH/UG 3/8-24 stud 3/8-24 stud Cl. Plate Approved for Colorado Springs Utilities 200 OH/UG #6-350 kcmil #6-350 kcmil Cl. Plate cd 200 OH/UG #6-350 kcmil #6-350 kcmil Cl. Plate Approved for XCEL Energy 200 OH #6-350 kcmil #6-350 kcmil Opening OH/UG #6-350 kcmil #6-350 kcmil Opening COfh 200 OH/UG 3/8-24 stud 3/8-24 stud Cl. Plate c a Units are not suitable for use with disconnect sleeves. b Bypass mechanism is lever-operated, jaw pressure release with 100% bypass capacity. c Devices have 5th terminal in the 6 o clock position and are not for use with 3 phase 4 wire service. OK for 1 and 3 phase, 3-wire. d Neutral can be isolated by removing the ground strap. 5th term. in 6 o clock position e Sockets with QG suffix are supplied with 2 ground lugs. f Devices have 5th Terminal in the 9 o clock position and are not for use with 3 phase, 3 wire service. g 7/16 barrel lock K.O. with bracket installed. h 7/8 barrel lock K.O. with bracket installed. i Includes SS latch and hasp. 404/ Knockouts (inches): g: 1/4 A: 1/2 B: 1/2, 3/4 S: 1, 1-1/4, 1-1/2, 2, 2-1/2 AF: 1, 1-1/2, 2, 2-1/2, 3 AG: 3/4, 1, 1-1/4, 1-1/2, 2, 2-1/2, 3 AI: 1, 1-1/4, 1-1/2, 2, 2-1/2, 3 : x2.750 HUB OP CO 10

13 320A Cont./400A Max. Meter Mounting Equipment Commercial abc, Type HQ, 4, 5 & 7 terminal for 1 phase, 3 wire & polyphase, 4 wire Cont. amp rating Service Connectors Line Load a All units have a lever operated, jaw pressure release bypass mechanism rated at 100%. b Disconnect sleeves should not be used with these devices. c Some devices do not include lugs, order separately. d Includes anti-inversion clip H Dimensions (in.) W H D Hub opening No. of term. Bypass Encl. matl. 320 OH/UG 1/2-20 1/ HD Cl. Plate 4 Lever Steel OH/UG #4-600 kcmil #4-600 kcmil HD Cl. Plate 4 Lever Steel f 320 OH/UG 1/2-20 1/ HD Cl. Plate 5 Lever Steel h 320 OH/UG 1/2-20 1/ HD Opening 5 Lever Steel FLe 320 OH/UG #4-600 kcmil (2) #6-350 kcmil HD Cl. Plate 4 Lever Steel f 320 OH/UG #4-600 kcmil (2)#4-600 kcmil HD Cl. Plate 5 Lever Steel f 320 OH/UG 3/8-24 3/ HD Cl. Plate 4 Lever Steel OH/UG (2) 1/0-250kcmil (2) #6-350 kcmil HD Cl. Plate 4 Lever Steel Approved for Xcel Energy 320 OH/UG 3/8-24 3/ HD Cl. Plate 5 Lever Steel FL 320 OH/UG 3/8-24 3/ HD Opening 7 Lever Steel FL Approved for Colorado Springs Utilities 320 OH/UG (2)#4-350 kcmil (2)#4-350 kcmil HD Cl. Plate 4 Lever Steel e 5 jaw devices are not for use with 3 phase, 4 wire service. f H60162 and H61300 lugs are also rated for (2) I/0-250 kcmil. g 5th jaw installed at 9:00. h 5th jaw installed at 6:00. Commercial - 320A cont./400a max. - 4 & 5 Jaw - Type HQ X 476 Knockouts (inches): A: 1/2 B: 1/2, 3/4 Z: 1-1/2, 2, 2-1/2 AC: 1/4, 1/2 AG: 3/4, 1, 1-1/4, 1-1/2, 2, 2-1/2, 3 EE: 2, 2-1/2, 3 GG: 2-1/2, 3, 3-1/2 HH: 2-1/2, 3, 3-1/2, 4 HD: x4.281 HUB OP

14 320A Cont. Meter Mounting Equipment Commercial abc, Type HQ, 7 terminal for 1 phase, 3 wire & polyphase, 4 wire Commercial - 320A cont./400a max. - 7 Jaw - Type HQ Cont. amp rating Service Connectors Line Load Dimensions (in.) W H D Hub opening a All units have a lever operated, jaw pressure release bypass mechanism rated at 100%. b Disconnect sleeves should not be used with these devices. c Some devices do not include lugs, order separately. See accessories page. d H60162 and H61300 lugs are also rated for (2) 250 kcmil. e 7/8 barrel lock K.O. with bracket included. f 7/8 barrel lock K.O., no bracket included. No. of term. Bypass Encl. matl. 320 OH/UG 3/8-24 3/ HD Cl. Plate 7 Lever Steel e 320 OH/UG 3/8-24 3/ HD Cl. Plate 7 Lever Steel FEf Approved for Colorado Springs Utilities 320 OH/UG #4-600 kcmil #4-600 kcmil HD Cl. Plate 7 Lever Steel d Approved for Xcel Energy 320 OH/UG 1/2-20 1/ HD Opening 7 Lever Steel FL 320 OH/UG 1/2-20 1/ HD Cl. Plate 7 Lever Steel FL FL FL Knockouts (inches): B: 1/2, 3/4 GG: 2-1/2, 3, 3-1/2 HH: 2-1/2, 3, 3-1/2, 4 HD: x4.281 HUB OP 4870X 4470X 4770X 12

15 400/480A Meter Mounting Equipment Residential a, Type K4, 4 terminal for 1 phase, 3 wire Cont./ Max, amp rating Type Service Connectors Line Load Dimensions (in.) W H D Hub opening Bypassb Encl. matl. 400/400 K4UT OH/UG (2) #6-350 kcmil (2) #6-350 kcmil HD Cl. Plate H56495 Steel /400 K4UT OH/UG 1/2-20 1/ HD Cl. Plate H56495 Steel a All units are UL listed. b Optional Manual Bypass H56495 available, normally for utility use only - 2 required. Residential Type K-4 Residential - 400/480A - 4 Jaw - Type K Overhead Parallel conductor 2 - H H H56732 Overhead Single conductor line Parallel conductor load 2 - H H H H56732 Overhead Single conductor 4 - H H56476 K4UT Underground Parallel conductor 2 - H H H56426 Underground Single conductor line Parallel conductor load 2 - H H H H56732 Underground 4 - H H56476 Knockouts (inches): B: 1/2, 3/4 GG: 2-1/2, 3, 3-1/2 HH: 2-1/2, 3, 3-1/2, 4 HD: x4, 281 HUB OP 13

16 400/480A Meter Mounting Equipment Commercial/Industrial a, Type K-7, 7 terminal & 7 terminal Side Wired, polyphase, 3 or 4 wire, Wye or Delta Residential/Commercial/Industrial - 400/480A - 7 Jaw - Type K-7 Cont./ Max. amp rating Type Service Connectors Line Load Dimensions (in.) W H D Hub Opening Bypassb Encl. matl. 400/400 K7T OH/UG 1/2-20 1/ HD Cl. Plate H58888 Steel /600 K7T OH/UG 1/2-20 1/ (2) HD Cl. Plates H58888 Steel a All units are UL listed. b Optional Manual Bypass H58888 available, normally for utility use only (3 required). Residential Type K-7 Overhead Single conductor 8 - H56476 Overhead Single and triple load feed 4 - H H Overhead Parallel conductor 8 - H K7T-400 Amp Underground Single conductor 3 - H H56476 Underground Single conductor line Triple conductor load 3 - H H H Underground Parallel conductor 3 - H H56732 Knockouts (inches): K7T-600 Amp B: 1/2, 3/4 HH: 2-1/2, 3, 3-1/2, 4 HD: x4, 281 HUB OP 14

17 Type PTS Transformer-Rated Meter Mounting Equipment with Test Switch Provision Socket Type PTS6: 6 Jaw PTS8: 8 Jaw PTS13: 13 Jaw Numbers Ringless - Solid Cover Ringless - Split Cover Ring Type - Split Cover Dimensions Cont. Amp. Hub Terminal Wire Range Aluminum Steel Aluminum Steel Aluminum Steel L W D Rating Opening Current Potential Cl. Plate #4-14 # Cl. Plate #4-14 # a Cl. Plate #4-14 #8-14 a Approved by PacifiCorp. General\Information Capacity: Application: Enclosures: Terminals: 20 amperes, 600 volts a.c. Transformer-rated applications. Available with or without test switch and pre-wiring. 14-gauge.063 aluminum or 16-gauge galvannealed steel suitable for indoor or outdoor installation. Set screw type. Hubs: Interchangeable 1, 1-1/4, 1-1/2 Finish: Aluminum unpainted unless specified. Steel enclosures have gray polyester powder coat finish. Type PTS Transformer-Rated Meter Mounting Equipment with Test Switch Provision Test Switches: Standard 6 and 10 pole, 480-volt rated switches are available from stock. Special switches available upon request. Common Features 20A continuous rated Ground lug available Steel or aluminum construction Split or solid cover construction OH and UG capabilities 600V rated Spacing for multiple test switch configurations Customized test switch and wiring Consult the factory for other available options such as, but not limited to alternate enclosure and hasp material, kearnaloxed terminals, enclosures with special KO configurations, pre-wired units, test switch specifications and special labeling. Knockouts (inches): B: 1/2, 3/4 Q: 1, 1-1/4, 1-1/2 AC: 1/4, 1/2 : x2.750 HUB OP 15

18 Type HQ-T Transformer-Rated, Lever Bypass Meter Mounting Equipment Type HQ-T Transformer-Rated Meter Mounting Equipment Socket Type HQ-6T: 6 Jaw HQ-8T: 8 Jaw HQ-13T: 13 Jaw Numbers Removable Handle Removable Handle Dimensions (in.) W H D Continuous Amp. Rating Hub Opening Terminal Wire Range Current Term. Potential Term Cl. Plate #4-14 # Hub Inst. #4-14 # Hub Inst. #4-14 # Cl. Plate #4-14 # a Hub Inst. #4-14 # Hub Inst. #4-14 # Cl. Plate #4-14 # Hub Inst. #4-14 # Hub Inst. #4-14 # Hub Inst. #4-14 #8-14 a Approved for Fayetteville PWC. General Information Capacity: 80 ampere continuous, 600 volts a.c. 6 terminal, single phase 2 or 3 wire; 8 terminal, 2 or 3 phase, 3 wire, HQ-13T - 3 phase, 4 wire wye or 4 wire Application: delta. For use with transformer-rated Class 10 or 20 meters. May also be used on self-contained applications up to 80 ampere load. Lever-Operated Jaw Release - Moving lever up closes bypass, providing positive short circuiting of the current circuits and releases jaw pressure on the meter current terminals providing easy removal of the meter. Also Bypass: available is a removable bypass handle which allows a solid cover, # for HQ-T or # for HQ-TS, to be placed on the box with the bypass closed when it is necessary to remove the meter for in-shop repair or testing. Bypass capacity: 80 amp continuous. Set screw type with pressure plate. Current terminals will accommodate conductors from #4 to #14. Terminals: Potential terminals will accommodate from #8 to #14. Track resistant polycarbonate transparent safety shield provides liberal insulation between potential jaws and Safety Shield: terminals and protection from accidental shorts and shocks. Common Features Clamping jaw lever bypass 80A continuous rated Ground lug available Screw type terminals with pressure plate Steel or aluminum construction Glass filled polyester block construction 200% rated bypass Overhead and underground capabilities 600V rated Consult the factory for other available options such as, but not limited to alternate enclosure and hasp material, kearnaloxed terminals, enclosures with special KO configurations and special labeling. Knockouts (inches): g: 1/4 B: 1/2, 3/4 S: 1, 1-1/4, 1-1/2, 2, 2-1/2 AI: 1, 1-1/4, 1-1/2, 2, 2-1/2, 3 : x2.750 HUB OP 16

19 Type HQ-TS Transformer-Rated Meter Mounting Equipment with Test Switch Provision & Lever Bypass Socket Type HQ-6T: 6 Jaw HQ-8T: 8 Jaw HQ-13T: 13 Jaw General Information Capacity: 80 ampere continuous, 600 volts a.c. HQ-6TS - Single phase, 2 or 3 wire, HQ-8TS - 2 or 3 phase, 3 wire Application: HQ-13TS - 3 phase, 4 wire wye or 4 wire delta For use with transformer-rated Class 10 or Class 20 meters and appropriate meter test switch. Bypass: Jaw release type. Moving lever up closes bypass providing positive short circuiting of the current circuits and releases jaw pressure on the meter current terminals providing easy removal of the meter. Terminals: Set screw type with pressure plate. Current terminals will accommodate conductors from #4 to #14 copper or aluminum. Potential terminals will accommodate conductors from #8 to #14 copper or aluminum. Safety Shield: Track resistant polycarbonate transparent insulating safety shield provides protection from accidental shorts and shocks. Potential terminals are mounted in the safety shield for ease of wiring and testing. Test Switch Mounting: Knockouts: Numbers Dimensions Continuous Hub Terminal Wire Range Removable Handle Solid Handle L W D Ampere Rating Opening Current Potential Cl. Plate #4-14 # Hub Inst. #4-14 # Hub Inst. #4-14 # Opening #4-14 # Cl. Plate #4-14 # Hub Inst. #4-14 # Hub Inst. #4-14 # Opening #4-14 # Cl. Plate #4-14 # Hub Inst. #4-14 # Opening #4-14 # Hub Inst. #4-14 #8-14 An insulated mounting bracket is included below the meter socket for the customer installation of a standard test switch. Holes are provided for No mounting screws. All box enclosures have one 1, 1 1/4, 1 1/2 concentric knockout in the back, and three 1, 1 1/4, 1 1/2 concentric knockouts in the bottom. There are no knockouts in the sides. In addition, there are one 1/4 knockout and one 1/2, 3/4 concentric knockout in the bottom. Common Features Clamping jaw lever bypass 80A continuous rated Ground lug available Screw type terminals with pressure plate Steel or aluminum construction Glass filled polyester block construction 200% rated bypass Overhead and underground capabilities 600V rated Spacing for multiple test switch configurations Type HQ-TS Transformer-Rated Meter Mounting Equipment with Test Switch Provision Consult the factory for other available options such as, but not limited to alternate enclosure and hasp material, kearnaloxed terminals, enclosures with special KO configurations and special labeling. Knockouts (inches): g: 1/4 A: 1/2 AF: 1, 1-1/2, 2, 2-1/2, 3 AG: 3/4, 1, 1-1/4, 1-1/2, 2, 2-1/2, 3 : x2.750 HUB OP 17

20 100/200A Meter Mounting Equipment Residential a, Meter Main, 4 & 5 terminal for 1 phase, 3 wire Rating Service Connectors Line Load Dimensions (in.) W H D Hub opening Main breaker No. Cover term. Bypass style 100 OH #14-2/ Opening 100A Prov. 4 Horn Ringless UAB111-0PCHcd Residential - 100/200A - 4 & 5 Jaw - Meter main 200 OH/UG #6-350 kcmil see breaker rating Cl. Plate A Prov. 4 None Ringless UAB417-XG 200 OH/UG #6-350 kcmil #6-350 kcmil Cl. Plate 200A Inst. 4 None Ringless UAB417-XPG 150 OH/UG #6-350 kcmil see breaker rating Cl. Plate 150A Inst. 4 None Ringless UAB OH/UG #6-350 kcmil see breaker rating Cl. Plate 200A Inst. 4 None Ringless UAB OH/UG #6-250 kcmil #2-1/0 CU, 2/0 AL Cl. Plate 125A inst. 5 Horn Ringless LGMM0202B1125RJBXbe 150 OH/UG #6-250 kcmil #1-300 kcmil Cl. Plate 150A inst. 5 Horn Ringless LGMM0202B1150RJBXbe 200 OH/UG #6-250 kcmil #1-300 kcmil Cl. Plate 200A inst. 5 Horn Ringless LGMM0202B1200RJBXbe 150 OH/UG #6-250 kcmil #1-300 kcmil Cl. Plate 150A inst. 4 None Ring LGMM0202B OH/UG #6-250 kcmil #1-300 kcmil Cl. Plate 200A inst. 4 None Ring LGMM0202B OH/UG #6-350 kcmil see breaker rating Cl. Plate A Prov. 4 None Ringless UAB877-PG Breaker table Amps 100 Q Q2125 Circuit breaker 150 QN2150 a All units are UL listed. b 5th terminal factory installed. c 5th terminal for field installation: H d UAB111-0PCH has a provision for a 100 amp max. circuit breaker. e Breaker factory installed. See breaker table for replacement circuit breakers. See accessories page in back. 200 QN2200 Knockouts (inches): 5/16 on UAB4 s: 5/16,1/2 on UAB8 g: 1/4 A: 1/2 S: 1,1-1/4,1-1/2, 2, 2-1/2 Z: 1-1/2, 2, 2-1/2 AI: 1, 1-1/4, 1-1/2, 2, 2-1/2, 3 DD: 1-1/4,1-1/2, 2, 2-1/2, 3 : x2.750 HUB OP LGMM0202B1200 UAB417-XG UAB417-XPG UAB877-PG UAB877 UAB1/UAB3 UAB4 18

21 200/400A Meter Mounting Equipment Residential, Meter Combination, 4 terminal for 1 phase, 3 wire Dimensions Hub Main No. Cover Rating Service W H D opening breaker term. Bypass style 200 OH/UG Cl. Plate 200A Inst. 4 None Ringless LG0408B1200RT 200 OH/UG Cl. Plate 200A Inst. 4 None Ringless LG0816B1200RCT 200 OH/UG Cl. Plate None 4 None Ringless LG0606L1200R 400 OH HD Cl. Plate 200A Inst. space for one more 200A main 4 Lever Ringless LG0816B1400RLT Approved for XCEL Energy 400 OH HD Cl. Plate None 4 Lever Ringless LG0404L1400RLM Residential - 200/400A - 4 Jaw - Meter Combination LG0408B1200RT 4 space, 8 circuit feed thru lugs LG0816B1200RCT 8 space, 16 circuit feed thru lugs LG0606L1200R 12 space, 6 circuit LG0606L1200RA 2 or 4 pole breakers only LG0404L1400RLM Accepts 2 main breakers A each LG0816B1400RLT 8 space, 10 circuit feed thru lugs 19

22 Amp Continuous EUSERC-Compliant Meter Mounting Equipment Ring Type, Test Block Bypass, 1-Phase & 3-Phase EUSERC - Type BY Meter-Main Combinations Number MS14TB Dimensions (in.) Cont. H W D Amps Service Large No. of Jaws 5th Jaws 1-Ph/3-Wire #6-2/0 4 EC5J MS15TB Ph/3-Wire #6-2/0 5 Installed MS17TB 3-Ph/4-Wire #6-2/0 7 MS24TB 1-Ph/3-Wire #1/0-250 lay-in. 4 UX005B MS25TB Ph/3-Wire #1/0-250 lay-in. 5 Installed MS27TB 3-Ph/4-Wire #1/0-250 lay-in. 7 MS44UTB Ph/3-Wire (2) #1/0-250 or(1) # Hub Provision (2x) -top (1x) HD-bot. (2x) -top (3x) HC-bot. (2x) -top (1x) HD-bot. MS14TB MS15TB MS17TB MS24TB MS27TB MS25TB MS44UTB R R R R S S S S S S AD AD AD AD R R L B AI AI A AI AI AI A AI AD HH B AD Devices approved by PacifiCorp MS14TB MS15TB MS17TB MS24TB MS27TB Knockouts (inches): A: 1/2 B: 1/2, 3/4 L: 1/2, 3/4, 1, 1-1/4, 1-1/2 R: 1, 1-1/4, 1-1/2, 2 AD: 1-1/4, 1-1/2, 2, 2-1/2, 3 AI: 1, 1-1/4, 1-1/2, 2, 2-1/2, 3 HC: 3.09 HUB OP HH: 2-1/2, 3, 3-1/2, 4 : x2.750 HUB OP MS44UTB MS14TB 20

23 EUSERC Commercial Metering Commercial Type BY Meter-Main Combinations Ring Type Commercial Meter-Disconnect Combinations with Test Block Bypass 240V AC Max Amps CB or Dimensions (in.) Cont. Duty Max AC Tenant Maina Fuse Prov. Service Jaws Number Service Feed W H D KO Fig. Wire Range AL/CU 65,000 Circuit QP/ 1 Phase- 3 Wire 4 MM0202L1100EY OH BY-1 #6-2/0 Breaker QPH/ 3 Phase- Provision HQP 4Wire 7 MM0303L3100EYc OH BY-1 #6-2/ Phase- MM0202F1100EYc OH BY-1 #6-2/0 100,000 T-Fuse 4 Class T 3 Wire MM0202F1100CEYc OH/UG BY-3 #6-2/0 Puller 300V 3 Phase- MM0303F3100EY OH BY-1 #6-2/0 7 4 Wire MM0303F3100CEY OH/UG BY-3 #6-2/ ,000 Circuit Breakerr Provision 100,000 T-Fuse Puller a Breaker/fuses not included. b See accessories on page 17. c Approved by PacifiCorp. QJ2/ QJH2/ QJ2H/ HQJ2H ClassT 300V 1 Phase- 3 Wire 3 Phase- 4 Wire 1 Phase- 3 Wire 3 Phase- 4 Wire Design / Performance Features Outdoor/Indoor one design for either installation Ring Type meets requirements for various ring type locking provisions Test Block Bypass Installed easy servicing without interruption Main Breaker Field Installed adaptable to the job Main T-Fuse puller factory installed (less fuses) adaptable to the job Contact local utility to confirm meter socket approval prior to installation MM0202L1200EY OH BY-2 #1/0-250 kcmil MM0202L1200CEYc OH/UG BY-4 #1/0-250 kcmil MM0303L3200EY OH BY-2 #1/0-250 kcmil MM0303L3200CEYc OH/UG BY-4 #1/0-250 kcmil MM0202F1200EY OH BY-2 #1/0-250 kcmil MM0202F1200CEY OH/UG BY-4 #1/0-250 kcmil MM0303F3200EY OH BY-2 #1/0-250 kcmil MM0303F3200CEYc OH/UG BY-4 #1/0-250 kcmil N N N N F B BY-1 N N S HC AA BY-2 A S AA HC Hub Provision AA HC HC S Commercial - EUSERC - Type BY Meter-Main Combinations HC Industry Specifications EUSERC SEC # V rated 100A and 200A models Up to 100,000 AIC when using fuses BY-3 BY-4 R R R S S S G A S S AA AA 21

24 EUSERC Commercial Metering Commercial Type BY Meter-Load Center Combinations Commercial - EUSERC - Type BY Meter-Load Center Combinations Ring Type Commercial Meter-Load Center Combinations with Test Block Bypass 240V AC Max Amps Cont. Duty Main Type No. of Spaces Max. Circuits Service Number 1 Phase 3 Wire, 4 Jaws, Factory Installed Main Breakera Q2100 Installed QN2200RH Installed OH OH/UG MC1020B100EYb MC1224B1100CEYb AIC Rating STD. AIC 10,000 10,000 Dimensions (in.)a MAX AIC H W D 65,000 42, Hub Prov. Wire Range AL/CU #6-2/0 #6-2/ OH/UG MC2440B1200CEYb 10,000 22, HC #1/ kcmil BY-9 3 Phase 4 Wire, 7 Jaws, Factory Installed T-Fuse Pullerc Class T 300V Provision BY Combo Accessories Description Hubs Conduit Size Closure Plates Adapter Plates Bottom Only Fifth Jaw 100A 200A Number EC38596 EC38597 EC38598 EC38599 ECHC200 EC38600 ECHC250 ECHC300 EC38595 ECHC000 ECHCA UX001WL (or) EC5J UX005B a See accessories above for available 5th jaws. b UL Listed to field change main breaker to higher AC. c Fuses not included. OH/UG OHUG Design / Performance Features Outdoor/Indoor one design for either installation Ring Type meets requirements for various ring type locking provisions Test Block Bypass Installed easy servicing without interruption Main Breaker Factory Installed Main T-Fuse pullers factory installed (less fuses) Compact wall-hung design reduces material and labor costs 240V rated 100A and 200A models Contact local utility to confirm meter socket approval prior to installation MC1830F3100CEY MC2442F3200CEY M R S C C C 100, ,000 M A A A B M M B A C B A M B A C C C C A A A A R R B A R 100, , R S M C C C B B B A A A A M HC MC1224B1100CEY R #6-2/0 #1/0-250 kcmil HC AA KO Fig. BY-7 BY-8 BY-10 BY-9 BY-7 BY-8 BY-9 BY-10 S S C C C C B B B B B B B B B M S M MC2442F3200CEY Knockouts (inches): g: 1/4 N: 3/4, 1, 1-1/4, 1-1/2, 2 AA: 1-1/2, 2, 2-1/2, 3 A: 1/2 P: 1, 1-1/4 BB: 1-1/2, 2, 2-1/2, 3, 3-1/2 B: 1/2, 3/4 Q: 1, 1-1/4, 1-1/2 CC: 2, 2-1/2, 3, 3-1/2 C: 1/2, 3/4, 1 R: 1, 1-1/4, 1-1/2, 2 EE: 2, 2-1/2, 3 D: 1/2, 1 S: 1, 1-1/4, 1-1/2, 2, 2-1/2 FF: 2-1/2, 3 E: 1/2, 3/4, 1, 1-1/4 T: 1-1/4 GG: 2-1/2, 3, 3-1/2 F: 1/2, 1-1/4, 1-1/2 U: 1-1/4, 1-1/2 HH: 2-1/2, 3, 3-1/2, 4 G: 3/4 V: 1-1/4, 1-1/2, 2 JJ: 3-1/2, 4 H: 3/4, 1 W: 1-1/4, 2 LL: 3 J: 3/4, 1, 1-1/4 X: 1-1/4, 1-1/2, 2, 2-1/2 VV: 2 K: 3/4, 1-1/4 Y: 1-1/2, 2 M: 3/4, 1, 1-1/4, 1-1/2 Z: 1-1/2, 2, 2-1/2 S 22

25 Circuit Breakers Features L Plug in L UL listed for use with Talon branded meter combinations L 1 Frame Description Amps 1-Pole 120V 15 L115 1-Pole 120V 20 L120 2-Pole 120/240V 20 L220 2-Pole 120/240V 30 L230 Circuit Breakers 2-Pole 120/240V 40 L240 2-Pole 120/240V 50 L250 Single Pole 2-Pole 120/240V 60 L260 2-Pole 120/240V 100 L Pole 120/240V 125 L Pole 120/240V 150 LN2150R 4-Pole 120/240V 200 LN2200R Double Pole Accessories Single Pole Padlocking Device Double Pole Padlocking Device 4-Pole Padlocking Device Handle Blocking Device (1 & 2 Pole) ECPLD1 ECPLD2 ECQLN3 ECQL1 4-Pole 23

26 Air Conditioning Disconnects Fused and Non-fused Features: Air Conditioning Disconnects - Fused & Non-Fused Flexibility L amperes L 240 volts A.C. L Padlock provisions L Horsepower rated L 10,000 A.I.C. L New models available with internal GFCI receptacle L Removable door L Ample wiring space Steel AC Disconnects Ampere rating Disconnect type Horse power rating Rugged Durability L Noryl thermoplastic and powder coated G90 steel enclosures are corrosion resistant and extremely durable giving long maintenance free service L Copper conductors L Raised mounting embosses Dimensions (inches) H W D 30 Fused pullout LF Fused pullout LF Non-fused pullout LN Non-automatic switch LNAS Plastic AC Disconnects Ampere rating Disconnect type Horse power rating Dimensions (inches) H W D 30 Fused pullout LF2030PL Fused pullout LF2060PL Non-fused pullout LN2060PL Non-fused pullout LN2060PLX Steel AC Disconnects with 15 Amp GFCI Receptacle Ampere rating Disconnect type Horse power rating Dimensions (inches) H W D 30 Fused pullout LF2030GFCI Fused pullout LF2060GFCI Non-fused pullout LN2060GFCI Non-automatic switch LNAS2060GFCI Wire Range Table Copper Aluminum Connector Solid Stranded Solid Stranded Line #14-8 #14-3 #12-8 #12-3 Load #14-8 #14-3 #12-8 #12-3 Neutral #12-8 #12-2 #12-8 #12-2 Equip. grnd. #12-8 #12-2 #12-8 #

27 Spa Panels For use as spa/hot tub service disconnect Features: L UL Listed L Factory installed, 2-pole 50A or 60A GFCI breaker for 240V ground fault protection L NEMA Type 3R outdoor enclosure L 2 extra spaces (4 circuits manimum) for additional circuit breakers L 125 Amp rated interior L Factory installed 5 position ground bar L Closure plate included L Compact enclosure size L Convenient standard package of 1 L Uses reliable Siemens circuit breakers 2-Pole GFCI breaker Dimensions (inches) H W D 50A LGSPA50 Spa Panels - 50A and 60A 60A LGSPA /4- dead front enclosure hub cover plate included 6 25

28 Connector Lugs H55890 #6-350 kcmil 3/8 H #6-350 kcmil 3/8 H56734 #6-250 kcmil 1/2 H37892 #4-500 kcmil 1/2 Connector Lugs H57606-K #6-350 kcmil 3/8 H56476 #3/0-800 kcmil 1/2 H60162 (1) #4-600 kcmil [or] (2) #1/0-250 kcmil 1/2 H61300 (1) #4-600 kcmil [or] (2) #1/0-250 kcmil 1/2 H58022 (2) #6-250 kcmil 3/8 H56732 (2) #4-350 kcmil 1/2 H (2) #4-350 kcmil 1/2 H (2) #4-350 kcmil 3/8 H56732-M (2) #4-500 kcmil 1/2 H (3) #6-250 kcmil 1/2 H56426 (4) #6-350 kcmil 1/2 H56477 #3/0-800 kcmil 1/2 H56425 (2) #6-350 kcmil 1/2 H56425-M (2) #4-500 kcmil 1/2 H58852 #3/0-800 kcmil 1/2 H56733 #3/0-800 kcmil 1/2 H56427 (2) #6-350 kcmil 1/2 H56427-M (2) #4-500 kcmil 1/2 H58853 (2) #6-350 kcmil 1/2 H /2 26

29 Connector Lugs Pressure type lugs for Talon s stud type meter mounting devices are made of 6061-T6 aluminum to provide high strength and high conductivity. All lugs are tin-plated to ensure low contact resistance and to reduce corrosion. Allen or hex head pressure screws are furnished to provide excellent conductor spread for maximum binding action with the lug. All Talon lugs are listed with Underwriters Laboratories. Pressure lug connectors for meter mounting devices Device type Conductor size opening Pressure screw head Dimensions* (inches) L W H Antirotation feature #6-350 kcmil 13/32 9/16 Hex 2-1/4 1-1/8 1-1/4 No H55890 HQ-4S #6-350 kcmil 13/32 5/16 Allen 2-1/4 1-1/8 1-1/4 No H HQ-5 S #6-350 kcmil 13/32 3/8 Allen 2-1/4 1-1/8 1-1/4 No H57606-K HQ-7S (2) #6-250 kcmil 13/32 5/16 Allen 2-3/16 1-5/8 1-3/16 No H58022 HQ-4D #4-500 kcmil 9/16 3/8 Allen 2-13/16 1-1/2 1-9/16 No H37892 HQ-5DM HQ-7D, HQ-7DF (1) #4-600 kcmil or (2) #1/0-250 kcmil 9/16 1/2 Allen 2-13/16 1-3/8 1-13/16 Yes No H60162 H61300 K-4,5,7 (2) #6-350 kcmil 9/16 5/16 Allen 2-7/8 1-57/64 1-1/4 No H56425 K-4,5,7 (2) #4-500 kcmil 9/16 3/8 Allen 2-13/16 2-1/16 1-9/16 No H56425-M K-4 (4) #6-350 kcmil 9/16 5/16 Allen 2-7/8 3-15/16 1-1/4 No H56426 K-4,5,7 (2) #6-350 kcmil 9/16 5/16 Allen 4-15/16 1-1/8 2-1/16 Yes H56427 K-4,5,7 (2) #2-500 kcmil 9/16 3/8 Allen 4-1/4 1-1/8 1-13/16 Yes H56427-M K-5,7 #3/0-800 kcmil 9/16 1/2 Allen 3-1/4 1-5/ /16 Yes H56476 K-4,5,7 #3/0-800 kcmil 9/16 1/2 Allen 3-1/4 1-5/ /16 Yes H56477 K-5,7 (2) #4-500 kcmil 9/16 3/8 Allen 2-13/16 2-5/32 1-9/16 No H56490 K-5,7 (2) #4-350 kcmil 9/16 5/16 Allen 2-7/8 1-59/64 1-1/4 Yes H56732 K-5,7 (2) #4-350 kcmil 9/16 5/16 Allen 2-7/8 1-59/64 1-1/4 No H K-5,7 (2) #4-500 kcmil 9/16 3/8 Allen 2-13/16 2-5/ /16 Yes H56732-M K-4,5,7 #3/0-800 kcmil 9/16 1/2 Allen 4-3/16 1-3/4 2-3/8 Yes H56733 K-4,5,7 (Grd.) #6-250 kcmil 9/16 5/16 Allen 2-9/16 1-9/32 1-3/16 No H56734 K-4,5,7 #3/0-800 kcmil 9/16 1/2 Allen 3-15/16 1-3/4 1-13/16 Yes H58852 K-4,5,7 (2) #6-350 kcmil 9/16 5/16 Allen 3-15/16 1-1/8 1-1/2 Yes H58853 K-4,5,7 (3) #6-250 kcmil 9/16 5/16 Allen 2-7/8 2-31/64 1-7/16 Yes H K-4 extender 1/2-20 x 1-7/8 9/16 None 4-1/4 1-1/4 2-3/8 Yes H Connector Lugs Lug Extender Dimensions (inches) Device type opening size W H D K-4 9/16 1/2-20 x 1-7/8 4-1/4 1-1/4 2-3/8 H ** * Dimensions do not include height of pressure screw with conductor installed. ** Includes nut and washer assembly and washer. H W L 27

30 Accessories Removable hub kits Sealing rings Accessories Removable hub Cover plate K-Base Accessories Conduit Size (inches) type hubs small 1 H /4 H /2 H H /2 H Cover plate - steel H Cover plate - aluminum H HD Type Hubs Large 3 H /2 H H Cover plate - steel H56933 Cover plate - aluminum H Large to small adaptor - H steel HD to Large to small adaptor - aluminum HD to Description K-7 only Isolated Neutral Kit K-7 Rotary Bypass Amp rated K-7 Rake Type Bypass Amp rated, temp use only K-4 Rake Type Bypass Amp rated, temp use only Insulated T-Handle Wrench Magnetic Hex Socket* *For use on meter Not for use on K7 H H H69623 H58888 H56495 H H Description Stainless Steel Snap Type Stainless Steel Screw Type Black plastic meter opening cover Clear plastic meter opening cover (with plug-in feet) H54602 H H39968 UAT, UAS, MQ and HQ Accessories H Description Insulated 5th terminal kit - Type AS, AT only Grounded 5th terminal kit - Type AS, AT only Anti -Inversion Clip for HQ Sockets MQ 5th terminal kit - 9:00 HQ 5th terminal kit - 9:00 w/o wire HQ 5th terminal kit - 9:00 w/ wire HQ 5th teminal kit - 9:00 w/ 9 lead *For use with side wired devices only. Grey touch-up paint -TUP61, 12 oz. can Ground strap kit, HQ-5 Ground lug kit, #14-2 Add-on grounding lug for HQ/HQU HQ isolated neutral kit (for 200A only, not for use with 320A) *Includes neutral and isolation block Neutral isolation kit for HQ (for 200A only, not for use with 320A) *Isolates existing neutral Insulated Jumper H H H59676 H H H H * XPT H36503 H55303 H * H * H

31 Terms of Sale, Meter Mounting Device Applications Terms of sale Transportation Charges: Prices listed are F.O.B. factory with freight prepaid and allowed on all shipments of orders of $1,000 net or more for single shipments to one location. Minimum Billing: $400 net plus transportation charges. Cancellation: Orders accepted by the factory can be cancelled only with the factory s consent and upon payment to the seller of reasonable charges incurred by the seller which will indemnify the seller against loss. Returns: Goods may not be returned to Talon without written authorization from the factory. A minimum 20% restocking charge will be applicable on all returned goods. Credit will be given only for current production items in unopened cartons. All transportation charges paid by Talon will be deducted from such credit. Terms: Standard/Stock Products: 2% 10th net 25th for invoices dated the 1st through the 15th of the month. 2% 25th net 10th for invoices dated the 16th through the 31st of the month. Meter Mounting Device Applications Electrical service 1-phase Service type Self-contained, 3 wire Meter form 2S Socket type Standard socket 4 jaw 100A AT-1 4 jaw 200A AT-3, AT-4, MQ-4, HQ-4 2SE 4 jaw 320A HQ-4S, HQ-4D Terms of sale - meter mounting device applications Self-contained, bolt-in 2K K4-400/480A K-4, K-4UT Transformer-rated, 2 wire 3S! 5 jaw 20A HQ-6T, HQ-6TS, PTS-6 Transformer-rated, 3 wire 4S! 6 jaw 20A HQ-6T, HQ-6TS 3-phase, 3 wire or network Self-contained 12S 5 jaw 100A MQ-5, HQ-5 12S 5 jaw 200A MQ-5, HQ-5 12SE 5 jaw 320A HQ-5SWT, HQ-5D Self contained bolt-in 12K K-5 480/600A K-5 Transformer-rated 5S 8 jaw 20A HQ-8T, HQ-8TS, PTS-8 3-phase, 4 wire 14S Self-contained 15S 7 jaw 100/200/320A MQ-7, HW-7 16S 14K Wye Self-contained, bolt-in 15K K-7 480/600A K-7, K-7T 16K 6S Transformer-rated 8S 13 jaw 20A HQ-13T, HQ-13TS, PTS- 13 or Delta 9S 29

32 Notes: 30

33 Notes: 31

34 Notes: 32

35

36 Represented by: I-PRO 6301 Federal Blvd. Suite 201 Denver, CO Phone: (720) Talon Meter Mounting Devices Siemens Industry, Inc Triangle Parkway Norcross, GA Subject to change without prior notice Order No.: RPSA-LG All rights reserved Printed in USA 2013 Siemens Industry, Inc. The information provided in this brochure contains merely general descriptions or characteristics of performance which in case of actual use do not always apply as described or which may change as a result of further development of the products. An obligation to provide the respective characteristics shall only exist if expressly agreed in the terms of contract. All product designations may be trademarks or product names of Siemens AG or supplier companies whose use by third parties for their own purposes could violate the rights of the owners.