Selection and application guide

Transcription

1 Selection and application guide For use in Delaware, New Jersey and Pennsylvania Meter Mounting Equipment

2

3 Meter Mounting Equipment Table of Contents Service Rating Positions Terminals Page Introduction and General Information Residential, 1 phase, 3 wire 135A 1 4 & 5 4 Residential, 1 phase, 3 wire 200A 1 4 & 5 5 Residential, 1 phase, 3 wire, side wired 200A 1 4 & 5 6 Residential, 1 phase, 3 wire, Horizontal Gang 100/150A & 5 7 Residential, 1 phase, 3 wire, Horizontal Gang 200A Residential, 1 phase, 3 wire, Vertical Gang 125A Commercial, Heavy Duty Lever Bypass, 1 phase, 3 wire 200A 1 4, 5 & 7 10 Commercial, Multi-position Lever Bypass, 1 phase, 3 wire 200A 2-6 4, 5, & 7 11 Commercial, Heavy Duty Lever Bypass, 1 phase, 3 wire; 3 phase, 3 wire; 3 phase, 4 wire 320A 1 4, 5, & 7 12 Residential/Commercial, Type K-4, 1 phase, 3 wire 400/480A Residential/Commercial/Industrial, Type K-7, 3 phase, 4 wire; Wye or Delta Residential/Commercial/Industrial, Type K-7, 3 phase, 4 wire; Wye or Delta 400A A Residential, Meter Main, 1 phase, 3 wire 100/200A 1 4 & 5 16 Residential, Meter Combination, 1 phase, 3 wire 200/400A Circuit Breakers Air Conditioning Disconnects Spa Panels Connector lugs Accessories 23 Terms of Sale, Meter Mounting Device Applications 24 Represented by: Pollart Electrical Sales 1231 Ford Road Bensalem, PA Phone: (215) Fax: (215)

4 Meter Mounting Equipment The standard for quality For more than 50 years, meter mounting devices that are now manufactured under the Talon Brand, have been known throughout the industry for innovation and quality. From our proprietary K-Base to our heavy duty HQ lever bypass socket, Talon products are known throughout the industry for innovation and quality. Talon meter sockets are built for safety, ease of installation, and long term quality. That s why we use stainless steel hardware, polyester powder coat paint for long lasting protection, and Type G-90 galvanized steel or 3003 grade aluminum for all of our enclosures. It s also why we use an all-copper current path in our commercial sockets. All of this adds up to why utilities, OEM s, and contractors recognize Talon meter mounting devices across the country as the leader in design, quality, and workmanship. Quality is the reason many utilities and electricians specify Talon products. Talon products - the standard for quality and design. HQ-5 block assembly The standard for quality. General information Materials: 16 gauge, galvanized steel, G gauge, galvanized steel, G gauge, aluminum 12 gauge, aluminum Enclosures: NEMA 3R Finish: Steel - Light gray, baked on powder polyester Aluminum - Mill finish Latches: All swing latches are stainless steel Block material: AS/AT, MQ, HQ, K-4 and K-7 - Glass reinforced polyester Terminals: AS/AT - Tin-plated aluminum extrusions 6061-T6 MQ, HQ, - Tin-plated copper Standards: Products cataloged herein meet or exceed the following standards: UL 486B, UL 414, NEMA 250, ANSI C12.7 Florida Meter Group requirements Voltage: All devices are rated at 600V AC Type K-4 rated at 300V AC 2

5 Meter Mounting Equipment Meter socket terminology Maximum and continuous ampacity UL and NEMA standards allow most electrical devices to be tested at one amp level ( continuous ), then allowed 125% as maximum. For example, a 400 Amp socket may either mean 400 Amps continuous (K-4) or 400A Max, 320A continuous which is also made by most competitors. Wire sizes - ampacity Connectors accept a fairly wide variety of wire sizes. \On the AT socket, a 350 MCM connector accepts conductors from #6 up to 350 MCM. The NEC specifies the ampacity of each wire size and type, also taking into account how the wire is installed in conduit. Lay-in and stud terminals Lay-in terminals are fixed and may not be modified in the field to accept other wire sizes or parallel conductors. terminals accept either lugs (see Product Schedule 497) or compression fittings (not available from Talon). Common uses for studs include where the field wiring may be either single or parallel. Terminals may be mixed on the line and load sides, e.g. stud on the line and lay-in on the load side. Ringless/Ring style Ring-type is an older, vanishing concept requiring a sealing ring. Talon recently added tooling to build this type of socket for the few remaining utilities that require them. In ringless design, the seal is made not on a sealing ring but using the cover and swing latch as the point of sealing. Overhead/Underground Sockets for UG service are usually wider in order to provide space for the conductors to loop around the block to the top connectors. Since more material is required in the enclosure, UG sockets are more expensive than OH sockets. Quite popular are combination units (OH/UG) which may be used in either service, and require a cover plate if used with UG feed. Hubs and cover plates Top of socket with hub opening has a flanged lip to keep out moisture. This requires a hub or cover plate to close. There are two sizes of openings: small for conduit hubs with sizes of 1, 1-1/4, 1-, 2, and 2-; and large for conduit hubs with sizes 3, 3-, and 4. See Product Schedule 499. Talon hub openings conform to ANSI C12.7 specs and are interchangeable with other socket manufacturers, but are not interchangeable with panel board style hubs. Bypass types A self-contained meter completes the circuit between the utility and the customer. In order to change the meter, the circuit must be broken, turning off the power to the customer. This is not acceptable in commercial establishments, or in many other types of services. A bypass allows a parallel path for the current flow, unmetered, while the meter is pulled. Types are: a) Lever-operated jaw release, also known as jaw clamping lever bypass (Talon type HQ). The best, because the meter cannot accidentally be pulled unless the bypass is engaged. Pulling the meter would also be a major safety hazard if there is a 480V installation and/or a large load in place, as the meter would then act as a switch, and cause arc. b) Lever-operated non-jaw release (Talon type MQ). Lever bypasses the meter, but the meter may be removed with the bypass open. c) Horn bypass (option on residential sockets). Tangs on line and load connectors allow for jumper leads to be fitted over them before the meter is pulled. d) Manual bypass (K-4, K-5, K-7) uses separate links, which are clamped onto special studs before the meter is removed. K-7 also uses a rotating link type bypass. e) Other types not made by Talon include: slide links, screw type, and automatic circuit closers. 3

6 135A Continuous Meter Mounting Equipment Residential a, 4 & 5 b terminal for 1 phase, 3 wire Residential - 135A - 4 & 5 Jaw - Ringless Cont. amp Service Connectors Line Load Dimensions (in.) W H D Hub opening Bypass Enclosure material 135 OH/UG #14-2/0 #14-2/ RX Opening None Steel UAT111-0MXAe Approved for Duquesne Light Co. and Allegheny Power 135 OH/UG #14-2/0 #14-2/ RX Opening Horn Steel UAT111-0PDN Approved for Allegheny Power, PECO, and UGI 135 OH/UG #14-2/0 #14-2/ RX Opening Horn Steel UAT111-0PZAe Approved for Delaware Electric Coop 135 OH/UG #14-2/0 #14-2/ " Inst. None Steel UAT111-BG Approved for First Energy, JCP&L, and PP&L 135 OH/UG #14-2/0 #14-2/ RX Opening Horn Steel UAT111-0PGPd Approved for Orange & Rockland 135 OH/UG #14-2/0 #14-2/ RX Opening None Steel UAT111-0MSPd 135 OH/UG #14-2/0 #14-2/ RX Opening Horn Steel UAT111-0PVcd Approved for PP&L 135 OH/UG #14-2/0 #14-2/ RX Opening None Steel UAT111-0G PSE&G accepted, approved for Orange & Rockland 135 OH/UG #14-2/0 #14-2/ RX Cl. Plate Horn Steel UAT111-XMBLd a All units include a quad neutral. b 5th terminal kit for field installation: H See accessories page in back. c 5th terminal installed 9:00. d 7/8 Barrel Lock w/ BRKT. e 7/16 Barrel Lock w/ BRKT. UAT111-XXXX UAT111-0PGP UAT111-XMBL Knockouts (inches): g: 1/4 L: 1/2, 3/4,1,1-1/4,1-1/2 N: 3/4,1,1-1/4,1-1/2, 2 R: 1,1-1/4,1-1/2, 2 RX: x2.750 HUB OP 4

7 200A Meter Mounting Equipment Residential a, 4 & 5 b terminal for 1 phase, 3 wire Cont. amp Service Connectors Line Load Dimensions (in.) W H D Hub opening Bypass No. term. Enclosure material 200 OH/UG #6-350 KCMIL #6-350 KCMIL RX Opening None 4 Steel UAT417-0P 200 OH #6-350 KCMIL #6-350 KCMIL RX Opening None 4 Steel UAT327-0MCOd 125 OH/UG #14-2/0 #14-2/ RX Cl. Plate None 4 Steel UAT411-XVZe Approved for Allegheny Power 200 OH/UG #6-350 KCMIL #6-350 KCMIL RX Opening Horn 4 Steel UAT417-0PQG 200 OH/UG #6-350 KCMIL #6-350 KCMIL RX Cl. Plate Horn 4 Steel UAT417-XPQG Approved for Delaware Electric Coop and First Energy 200 OH/UG #6-350 KCMIL #6-350 KCMIL RX Cl. Plate None 4 Steel UAT417-XG Approved for Delmarva/Atlantic Electric (Pepco/Connectiv) 200 OH/UG #6-350 KCMIL #6-350 KCMIL RX Cl. Plate Horn 4 Steel UAT417-XPCV Approved for Duquesne Light Co. 200 OH #6-350 KCMIL #6-350 KCMIL RX Opening Horn 4 Steel UAT317-0PDN 200 OH/UG #6-350 KCMIL #6-350 KCMIL Blank Top Horn 4 Steel UAT417-PPDN Approved for First Energy and PP&L 200 OH #6-350 KCMIL #6-350 KCMIL RX Opening Horn 4 Steel UAT317-0PGP 200 OH #6-350 KCMIL #6-350 KCMIL RX Opening Horn 4 Steel HUAT317-0PGPc Approved for Orange & Rockland 200 OH #6-350 KCMIL #6-350 KCMIL RX Opening None 5 Steel UAT317-0FP 200 OH/UG #6-350 KCMIL #6-350 KCMIL RX Cl. Plate None 5 Steel UAT417-XFP Approved for PECO and UGI 200 OH #6-350 KCMIL #6-350 KCMIL RX Opening Horn 4 Steel UAT317-0PZA Residential - 200A - 4 & 5 Jaw - Ringless PSE&G accepted, approved for Orange & Rockland 200 OH/UG #6-350 KCMIL #6-350 KCMIL RX Cl. Plate Horn 5 Steel UAT417-XMBL a All units include a quad neutral. b 5th terminal kit for field installation: H See accessories page in back. c Single package. d Ring style cover. e De-rated to 125 amps continuous. UAT317-0PZA UAT417-XG UAT417-XMBL Knockouts (inches): g: 1/4 A: 1/2 S: 1,1-1/4,1-1/2, 2, 2-1/2 AB: 1/4, 1/2, 7/8 RX: x2.750 HUB OP UAT317-XXXX UAT417-XXXX 5

8 200A Meter Mounting Equipment Residential a, Side Wired, 4 & 5 b terminal for 1 phase, 3 wire Residential - 200A - 4 & 5 Jaw - Side Wired Cont. amp Connectors Dimensions (in.) Meter No. of Service Line Load W H D Bypass opening term. Approved for Allegheny Power and UGI 200 UG #6-350 KCMIL #6-350 KCMIL Horn Left 4 UAS817-PPZA 200 UG #6-350 KCMIL #6-350 KCMIL Horn Left 4 HUAS817-PPZAc 200 UG #6-350 KCMIL #6-350 KCMIL Horn Right 4 UAS877-PPZA Approved for Delmarva/Atlantic Electric (Pepco/Connectiv) 200 UG #6-350 KCMIL #6-350 KCMIL Horn Right 4 UAS877-PPCV Approved for Duquesne Light Co. 200 UG #6-350 KCMIL #6-350 KCMIL Horn Right 4 UAS877-PPDN Approved for First Energy, JCP&L, and PP&L 200 UG #6-350 KCMIL #6-350 KCMIL Horn Left 4 UAS817-PPGP 200 UG #6-350 KCMIL #6-350 KCMIL Horn Right 4 UAS877-PPGP Approved for Orange & Rockland 200 UG #6-350 KCMIL #6-350 KCMIL None Left 5 UAS817-PFP a Unit is supplied with 2 ground lugs. b 5th terminal kit for field installation: H See accessories page in back. c Single Pack - same as UAS817-PPZA w/ carton. UAS817 UAS817-PPGP Knockouts (inches): AC: 1/4, 1/2 AD: 1-1/4, 1-1/2, 2, 2-1/2, 3 UAS877 UAS877-PPZA 6

9 100/150A Meter Mounting Equipment Residential abc, Horizontal Gang, 4 & 5 terminal for 1 phase, 3 wire No. pos. Cont. amp Overall amp. Connectors Line Load Bypass No. of term. Dimensions (in.) W H D Hub opening Approved for Allegheny Power and PECO #6-350 KCMIL #14-2/0 Horn RX Opening UA2311-0PZA #6-350 KCMIL #14-2/0 Horn RX Opening UA3311-0PZA #6-350 KCMIL #14-2/0 Horn RX Opening UA4311-0PZA Approved for First Energy and PP&L #6-350 KCMIL #14-2/0 Horn RX Opening UA2311-0PGP #6-350 KCMIL #14-2/0 Horn RX Opening UA3311-0PGP #6-350 KCMIL #14-2/0 Horn RX Opening UA4311-0PGP Approved for Orange & Rockland #6-350 KCMIL #14-2/0 Horn RX Cl. Plate UA2311-XBBU #6-350 KCMIL #14-2/0 Horn RX Cl. Plate UA3311-XBBU #6-350 KCMIL #14-2/0 Horn RX Cl. Plate UA4311-XBBU PSE&G accepted #6-350 KCMIL #14-2/0 Horn RX Cl. Plate UA2311-XBBU #6-350 KCMIL #14-2/0 Horn RX Cl. Plate UA2311-XMBL Approved for PP&L #6-350 KCMIL #6-350 KCMIL None RX Opening UA2313-0G #6-350 KCMIL #6-350 KCMIL None RX Opening UA3313-0G #6-350 KCMIL #6-350 KCMIL None RX Opening UA4313-0G Residential - 100/150A - 4 & 5 Jaw - Horizontal Gang a All units are equipped with a ground lug. b All sockets are suitable for either overhead or underground feed. c 5th terminal kit for field installation: H See accessories page in back. Knockouts (inches): S: 1,1-1/4,1-1/2, 2, 2-1/2 AC: 1/4, 1/2 RX: x2.750 HUB OP UA2311-XBBU UA2311 UA3311 UA4311 7

10 200A/Position Meter Mounting Equipment Residential abc, Horizontal Gang, 4 terminal for 1 phase, 3 wire Residential - 200A - 4 Jaw - Horizontal Gang No. pos. Cont. amp Overall amp. Connectors Line Load Service No. of term. Dimensions (in.) W H D Hub opening Approved for Allegheny Power, PECO and UGI (7/16 barrel lock KO w/ BKT) /0-600 KCMIL #6-350 KCMIL OH/UG HD Opening UA2717-YPZA /0-600 KCMIL #6-350 KCMIL OH/UG HD Opening UA3717-YPZA (2) 1/0-600 KCMIL #6-350 KCMIL OH/UG HD Opening UA4719-YPZA (2) 1/0-600 KCMIL #6-350 KCMIL OH/UG HD Openings UA5719-KPZA (2) 1/0-600 KCMIL #6-350 KCMIL OH/UG HD Openings UA6719-KPZA Approved for Delmarva/Atlantic Electric (Pepco/Connectiv) (No barrel lock provisions) /0-600 KCMIL #6-350 KCMIL UG Blank Top UA2717-PPCV /0-600 KCMIL #6-350 KCMIL OH HD Cl. Plate UA2717-ZPCV (2) 1/0-600 KCMIL #6-350 KCMIL UG Blank Top UA4719-PPCV (2) 1/0-600 KCMIL #6-350 KCMIL OH HD Cl. Plate UA4719-ZPCV (2)1/0-600 KCMIL #6-350 KCMIL OH HD Cl. Plates UA6719-MPCV (2) 1/0-600 KCMIL #6-350 KCMIL UG Blank Top UA6719-PPCV Approved for First Energy, JCP&L, and PP&L (also 2-gang only approved for PSE&G) (7/8 barrel lock KO w/ BKT) /0-600 KCMIL #6-350 KCMIL OH/UG HD Opening UA2717-YPGP /0-600 KCMIL #6-350 KCMIL OH/UG HD Opening UA3717-YPGP (2) 1/0-600 KCMIL #6-350 KCMIL OH/UG HD Opening UA4719-YPGP (2) 1/0-600 KCMIL #6-350 KCMIL OH/UG HD Openings UA5719-KPGP (2) 1/0-600 KCMIL #6-350 KCMIL OH/UG HD Openings UA6719-KPGP Approved for Duquesne Light Company and Allegheny Power (7/16 barrel lock KO, no BKT) /0-600 KCMIL #6-350 KCMIL OH/UG HD Opening UA2717-YPDN /0-600 KCMIL #6-350 KCMIL OH/UG HD Opening UA3717-YPDN (2) 1/0-600 KCMIL #6-350 KCMIL OH/UG HD Opening UA4719-YPDN (2) 1/0-600 KCMIL #6-350 KCMIL OH/UG HD Openings UA5719-KPDN (2) 1/0-600 KCMIL #6-350 KCMIL OH/UG HD Openings UA6719-KPDN a All units are equipped with a ground lug. b All sockets are Horn Bypass Style. c 5th terminal kit for field installation: H See accessories page in back. UA5719 UA6719 UA2717-YPQG UA2717 UA3717 UA4719 Knockouts (inches): X: 1-1/4,1-1/2, 2, 2-1/2 AC: 1/4, 1/2 AD: 1-1/4, 1-1/2, 2, 2-1/2, 3 HD: x4.281 HUB OP RX: x2.750 HUB OP 8

11 125A Continuous Meter Mounting Equipment Residential, Vertical Gang, 4 terminal for 1 phase, 3 wire Cont. amp No. pos. Service Connectors Line Load Bypass Dimensions (in.) W H D Hub opening OH #8-350 KCMIL #8-2/0 Horn RX Opening UA2B11-0PGPa OH #8-350 KCMIL #8-2/0 Horn RX Opening UA3B11-0PGPa Approved for First Energy, JCP&L, and PP&L OH #8-350 KCMIL #8-2/0 Horn RX Opening UA2B11-0PZAb OH #8-350 KCMIL #8-2/0 Horn RX Opening UA3B11-0PZAb a Includes 7/8 barrel lock KO w/ bracket. b Includes 7/16 barrel lock KO w bracket. Residential - 125A - Vertical Gang UA2B11-0PZA UA3B11-0PZA UA2B11-0PZA UA3B11-0PZA Knockouts (inches): g: 1/4 L: 1/2, 3/4, 1, 1-1/4, 1-1/2 RX: x2.750 HUB OP 9

12 200A Continuous Meter Mounting Equipment Commercial ab, Heavy Duty Lever Bypass, 4 terminal for 1 phase, 3 wire; 5 terminal for 1 & 3 phase, 3 wire; 7 terminal for 3 phase, 4 wire Commercial - 200A - Heavy Duty Lever Bypass Cont. amp Connectors No. of Dimensions Enclosure Hub Line Load term. W H D Service material opening Approved for Allegheny Power 200 #6-350 KCMIL #6-350 KCMIL OH/UG Steel RX Opening AN Approved for Delmarva/Atlantic Electric (Pepco/Connectiv) 200 #6-350 KCMIL #6-350 KCMIL OH/UG Steel HD Cl. Plate CV 200 #6-350 KCMIL #6-350 KCMIL OH/UG Steel HD Cl. Plate CVc Approved for First Energy and PP&L 200 #6-350 KCMIL #6-350 KCMIL OH Steel RX Opening GP 200 #4-600 KCMIL #6-350 KCMIL UG Steel RX Opening Approved for First Energy 200 #6-350 KCMIL #6-350 KCMIL OH/UG Steel RX Cl. Plate Approved for Orange & Rockland ( SP accepted by PSE&G) 200 #6-350 KCMIL #6-350 KCMIL OH/UG Steel RX Opening Fd 200 #6-350 KCMIL #6-350 KCMIL OH/UG Steel RX Cl. Plate SP Approved for PECO 200 #6-350 KCMIL #6-350 KCMIL OH/UG Steel RX Cl. Plate #6-350 KCMIL #6-350 KCMIL UG Steel Blank e Approved for PECO and PP&L 200 #6-350 KCMIL #6-350 KCMIL OH Steel RX Opening Approved for PP&L 200 #4-600 KCMIL #6-350 KCMIL UG Steel RX Cl. Plate Approved for PP&L and UGI 200 #6-350 KCMIL #6-350 KCMIL OH/UG Steel HD Opening TH PSE&G and JCP&L accepted 200 #6-350 KCMIL #6-350 KCMIL OH Steel 2" Hub Inst SPc 200 #6-350 KCMIL #6-350 KCMIL OH/UG Steel RX Cl. Plate SPc a Bypass mechanism is lever-operated, jawpressure release with 100% bypass capacity. b Disconnect sleeves should not be used with these devices. c This unit is not for use with 3-phase, 3-wire service. 5th terminal is in the 9 o clock position. d This device may be used for 3-phase, 3-wire service. e Use 5th jaw kit #H (or) -3. Knockouts (inches): g: 1/4 A: 1/2 B: 1/2, 3/4 S: 1, 1-1/4, 1-1/2, 2, 2-1/2 AE: 1/4, 1/2, 3/4, 1, 1-1/4 AF: 1, 1-1/2, 2, 2-1/2, 3 AG: 3/4, 1, 1-1/4, 1-1/2, 2, 2-1/2, 3 AI: 1, 1-1/4, 1-1/2, 2, 2-1/2, 3 EE: 2, 2-1/2, 3 GG: 2-1/2, 3, 3-1/2 HH: 2-1/2, 3, 3-1/2, 4 RX: HD: x2.750 HUB OP x4.281 HUB OP 4000X 4040X/4140X 4770X 9804/XXXX

13 200A Continuous Meter Mounting Equipment Commercial a Multi-position Lever Bypass bc 4, 5 and 7 terminal for 1 phase, 3 wire No. of pos. Cont. amp Overall amp. Service Connectors line Connectors load B: 1/2, 3/4 X: 2, 2-1/2, 3, 3-1/2 AC: 1/4, 1/2 HD: x4, 281 HUB OP Dimensions (in.) W H D No. of term. Bypassb Encl. matl. d 120/240V AC MAX 1 Phase 3 Wire OH/UG 1/0-500 KCMIL #6-350 KCMIL Lever Steel OH/UG 1/0-500 KCMIL #6-350 KCMIL Lever Steel NUe OH/UG 1/0-500 KCMIL #6-350 KCMIL Lever Steel NUe OH/UG (2) 1/0-500 KCMIL #6-350 KCMIL Lever Steel NUe OH/UG (2) 1/0-500 KCMIL #6-350 KCMIL Lever Steel NUe OH/UG (2) 1/0-500 KCMIL #6-350 KCMIL Lever Steel NUe 600V AC MAX 3 Phase 4 Wire OH/UG 1/0-500 KCMIL #6-350 KCMIL Lever Steel NU OH/UG 1/0-500 KCMIL #6-350 KCMIL Lever Steel NU OH/UG (2) 1/0-500 KCMIL #6-350 KCMIL Lever Steel NU OH/UG (2) 1/0-500 KCMIL #6-350 KCMIL Lever Steel NU OH/UG (2) 1/0-500 KCMIL #6-350 KCMIL Lever Steel NU a All units are UL listed and are equipped with a ground lug. b Bypass is jaw clamping, lever operated and is rated for 100%. c Hub opening is HD Cl. plate or 2 HD Cl. plates. d Check with utility for approval prior to installation. e 5th terminal included at 9 o clock position. Knockouts (inches): NU Commercial - 200A - Multi-position Lever Bypass 4040X2-XXXX 404X3-XXXX NU 4040X4-XXXX 4040X5-XXXX 4040X6-XXXX 11

14 320A Continuous Meter Mounting Equipment Commercial abc Heavy Duty Lever Bypass 4, 5 and 7 terminal for 1 phase, 3 wire; 3 phase, 3 wire; 3 phase, 4 wire Commercial - 320A - 4, 5 & 7 Jaw - Ringless Cont. amp Connectors line Connectors load No. of term. Dimensions (in.) W H D Service Encl. matl. Hub opening 320 #4-600 KCMIL #4-600 KCMIL OH/UG Steel HD Cl. Plate Approved for Allegheny Power 320 3/8-24 3/ OH/UG Steel HD Cl. Plate f 320 #4-600 KCMIL (2)#4-350 KCMIL OH/UG Steel HD Cl. Plate f 320 3/8-24 3/ OH/UG Steel HD Cl. Plate Approved for Delmarva (Pepco/Connectiv) 320 3/8-24 3/ OH/UG Steel HD Cl. Plate CVe Approved for First Energy and JP&L 320 #4-600 KCMIL #4-600 KCMIL OH Steel HD Opening GPe 320 #4-600 KCMIL #4-600 KCMIL OH/UG Steel HD Cl. Plate GPdf 320 #4-600 KCMIL #4-600 KCMIL OH/UG Steel HD Cl. Plate GPd Approved for First Energy 320 3/8-24 3/ OH/UG Steel HD Cl. Plate FE 320 3/8-24 3/ OH/UG Steel HD Cl. Plate FE Approved for First Energy and PP&L 320 3/0-800 KCMIL 1/ OH/UG Steel HD Cl. Plate PPf Approved for Orange & Rockland 320 #4-600 KCMIL #4-600 KCMIL OH/UG Steel HD Cl. Plate BU Approved for PECO 320 #4-600 KCMIL #4-600 KCMIL OH/UG Steel HD Cl. Plate f Approved for PP&L 320 3/0-800 KCMIL 1/ OH/UG Steel HD Cl. Plate PPd Approved for PP&L and UGI 320 3/0-800 KCMIL 1/ OH/UG Steel HD Cl. Plate f Approved for PSE&G 320 3/8-24 3/ OH/UG Steel HD Cl. Plate SP a All units are supplied with a ground lug. b Bypass mechanism is lever-operated, jaw pressure release with 100% bypass capacity. c Disconnect sleeves should not be used with these devices. d These devices include anti-inversion clip in upper right hand jaw, #H e Use 5th jaw kit #H (or) -3. f Use 5th jaw kit #H PP GP 4760X 4470X/4870X 4810X EE EE EE A EE EE EE EE Knockouts (inches): g: 1/4 A: 1/2 B: 1/2, 3/4 AG: 3/4, 1, 1-1/4, 1-1/2, 2, 2-1/2, 3 EE: 2, 2-1/2, 3 HH: 2-1/2, 3, 3-1/2, 4 HD: x4, 281 HUB OP 12

15 400/480A Continuous Meter Mounting Equipment Residential/Commercial a, Type K-4, 4 terminal for 1 phase, 3 wire Cont. amp Type Service Connectors Approved for Delmarva/Atlantic Electric (Pepco/Connectiv) Dimensions (in.) W H D Hub opening Encl. matl. 400 K-4UT OH/UG 1/ HD Cl. Plate Steel Approved for PP&L 480 K-4SW OH/UG 1/ HD Cl. Plates Steel a All units are UL listed. Approved connectors for Approved connectors for Lug position no. Description Line H56427 (2) #6-350 KCMIL Load H56425 (2) #6-350 KCMIL Neutral H56426 (4) #6-350 KCMIL Ground H56734 (1) #6-350 KCMIL Lug position Line Load Line - Neutral Load - Neutral Ground Single Port kit # s Double Port kit # s Triple Port kit # s Cat. # Description Cat. # Description Cat. # Description (2) H56476 (2) H56477 (1) H56476 (1) H60162 (1) H56734 (1) #3/0-800 KCMIL (1) #3/0-800 KCMIL (1) #3/0-800 KCMIL (1) #4/0-600 KCMIL (1) #6-250 KCMIL (2) H56732 or (2) H56732-M (2) H56427 or (2) H56427-M (1) H56732 or (1) H56732-M (1) H56732 or (1) H56732-M (2) #4-350 KCMIL (2) #4-500 KCMIL (2) #4-350 KCMIL (2) #4-500 KCMIL (2) #4-350 KCMIL (2) #4-500 KCMIL (2) #4-350 KCMIL (2) #4-500 KCMIL (1) H56734 (1) #6-250 KCMIL Residential Type K-4 (2) H (2) H (1) H (1) H (1) H56734 (3) #6-250 KCMIL (3) #6-250 KCMIL (3) #6-250 KCMIL (3) #6-250 KCMIL (1) #6-250 KCMIL OVERHEAD SERVICE Residential/Commercial - 400A/480A - Type K HD HD Overhead GG HH HH HH HH B HH HH HH GG Overhead Parallel conductor Overhead Single conductor line Parallel conductor load Overhead Single conductor UNDERGROUND SERVICE Underground Knockouts (inches): B: 1/2, 3/4 GG: 2-1/2, 3, 3-1/2 HH: 2-1/2, 3, 3-1/2, 4 HD: x4, 281 HUB OP Underground Parallel conductor Underground Single conductor line Parallel conductor load Underground

16 400A Meter Mounting Equipment Residential/Commercial/Industrial, Type K-7, 7 terminal for 3 phase, 4 wire, Wye, or Delta Residential/Commercial/Industrial - 400A - Type K-7 Cont. amp Type Service Connectors Dimensions (in.) W H D Hub opening Encl. matl. Bypassa b 400 K-7T OH/UG 1/ HD Cl. Plate Steel H d Approved for Delmarva/Atlantic Electric (Pepco/Connectiv) 400 K-7T OH/UG 1/ HD Cl. Plate Steel H c a All K-7 units require manual buypass H58888 normally for utility use only (3 required). b Ground lug H56734 included with these devices. c includes polycarbonate safety shield. d Does NOT include polycarbonate safety shield. Approved Connectors for and Lug position Single OH lugs no. Single UG lugs no. Parallel OH lugs no. Parallel UG lugs no. Line H56476 H58852 H56425 H58853 Load H56476 H56476 H56425 H56425 Neutral H56476 H56476 H56476 H56476 Overhead Single conductor 8 - H56476 Overhead Single and triple load feed 4 - H H Overhead Parallel conductor 8 - H Knockouts (inches): B: 1/2, 3/4 HH: 2-1/2, 3, 3-1/2, 4 Underground Single conductor 3 - H H56476 Underground Single conductor line Triple conductor load 3 - H H H Underground Parallel conductor 3 - H H56732 HD: x4, 281 HUB OP 14

17 480A Cont./ 600A max. Meter Mounting Equipment Residential/Commercial/Industrial, Type K-7 7 terminal for 3 phase, 4 wire, Wye or Delta a Cont. amp Type Service Connectors Dimensions (in.) W H D Hub opening Encl.matl. Approved for PP&L and PSE&G 480 K-7 OH 1/ (2) HD Openings Steel b Approved for PP&L and Delmarva (Pepco/Connectiv) 480 K-7SW OH/UG 1/ (2) HD Cl. Plates Steel b a All units are UL listed. Required lugs for Lug position Parallel OH and UG lugs no. Line H56732-M H56476 Load H56732-M H56476 Neutral H56732-M H56476 b Ground Lug H56734 included with device. Single OH and UG lugs no. K7SW Wiring Required lugs for Lug position Parallel OH and UG lugs no. Line H56732-M H56476 Load H56732-M H56476 Neutral H56732-M H56476 Single OH and UG lugs no. Residential/Commercial/Industrial - 480A/600A - 7 Jaw - Ringless Overhead UNDERGROUND SERVICE Overhead Single conductor 8 - H56476 Overhead Single and triple load feed 4 - H56476 OVERHEAD SERVICE 4- H Overhead Parallel conductor 8 - H56732 K-7 CE Underground K7SW Knockouts (inches): B: 1/2, 3/4 Underground Single conductor 3 - H H56476 Underground Single conductor line Triple conductor load 3 - H H H Underground Parallel conductor 3 - H H56732 HH: 2-1/2, 3, 3-1/2, 4 HD: x4.281 HUB OP 15

18 100/200A Meter Mounting Equipment Residential a, Meter Main 4 and 5 terminal for 1 phase, 3 wire Residential - 100/200A - 4 & 5 Jaw - Meter Mains Connectors Rating Service Line Load 100 OH #14-2/0 #6-350 KCMIL 200 OH/UG #6-350 KCMIL 150 OH/UG #6-250 KCMIL 200 OH/UG #6-250 KCMIL Approved for First Energy 200 OH #6-350 KCMIL see breaker see breaker see breaker see breaker Dimensions (in.) W H D Hub opening RX Opening Approved for PP&L, First Energy and Allegheny Power 125 OH/UG 150 OH/UG 200 OH/UG #6-250 KCMIL #6-250 KCMIL #6-250 KCMIL #2-1/0 CU, 2/0 AL #1-300 KCMIL #1-300 KCMIL RX Cl. Plate RX Cl. Plate RX Cl. Plate RX Opening RX Cl. Plate RX Cl. Plate RX Cl. Plate Main breaker 125A Prov. 200A Prov. 150A Inst. 200A Inst. 200A Inst. 125A Inst. 150A Inst. 200A Inst. a All units are UL listed. b 5th terminal factory installed. c 5th terminal for field installation: H d UAB111-0PCH has a provision for a 125 amp max. circuit breaker. See breaker table for details. e Breaker factory installed. See breaker table for replacement circuit breakers. f AEP and First Energy approved. g UAB417-XPG required QN2150 or QN2200 (smaller L2100 and similar can be used as well) See accessories page in back. No. term. Bypass Cover style 4 Horn Ringless 4 None Ringless UAB111-0PCH cd UAB417-XPG g 4 None Ringless UAB None Ringless UAB Horn Ringless 5 Horn Ringless 5 Horn Ringless 5 Horn Ringless UAB317-0PCH ce LGMM0202B1125RJBX bef LGMM0202B1150RJBX bef LGMM0202B1200RJBX be Breaker table Amps Circuit breaker 100 L L LN2150R 200 LN2200R UAB317/417 except -XPG device above - see footnote QJ22B200 UAB1/UAB3 UAB4 Knockouts (inches): g: 1/4 A: 1/2 C: 1/2, 3/4, 1 S: 1,1-1/4,1-1/2, 2, 2-1/2 Z: 1-1/2, 2, 2-1/2 DD: 1-1/4,1-1/2, 2, 2-1/2, 3 RX: x2.750 HUB OP UAB317-0PCH UAB417-XPG LGMM0202B1200RJBX 16

19 200/400A Meter Mounting Equipment Residential, Meter Combination, 4 terminal for 1 phase, 3 wire Rating Service Dimensions (in.) W H D Hub opening Main breaker No. term. Bypass Cover style 200 OH/UG RX Cl. Plate 200A Inst. 4 None Ringless LG0408B1200RTa 200 OH/UG RX Cl. Plate 200A Inst. 4 None Ringless LG0816B1200RCTa 200 OH/UG RX Cl. Plate None 4 None Ringless LG0606L1200Ra 200 OH/UG RX Cl. Plate None 4 None Ringless LG0606L1200RA*a Approved for First Energy, PP&L and Allegheny Power 400 OH HD Cl. Plate None 4 Lever Ringless LG0404L1400RLMb 400 OH HD Cl. Plate 200A Inst. space for one more 200A main 4 Lever Ringless LG0816B1400RLTb *Aluminum enclosure a 5th jaw available - EC5J2 b 5th jaw available - H Residential - 200/400A - 4 Jaw - Meter Combination LG0408B1200RT 4 space, 8 circuit feed thru lugs LG0816B1200RCT 8 space, 16 circuit feed thru lugs LG0606L1200R 12 space, 16 circuit LG0606L1200RA 2 or 4 pole breakers only LG0404L1400RLM Accepts 2 main breakers A each LG0816B1400RLT 8 space, 10 circuit feed thru lugs 17

20 Circuit Breakers Features L Plug in L UL listed for use with Talon branded meter combinations L 1 Frame Description Amps Circuit Breakers 1-Pole 120V 15 L115 1-Pole 120V 20 L120 2-Pole 120/240V 20 L220 2-Pole 120/240V 30 L230 Single Pole 2-Pole 120/240V 40 L240 2-Pole 120/240V 50 L250 2-Pole 120/240V 60 L260 2-Pole 120/240V 100 L Pole 120/240V 125 L Pole 120/240V 150 LN2150R 4-Pole 120/240V 200 LN2200R Double Pole 4-Pole Accessories Single Pole Padlocking Device Double Pole Padlocking Device 4-Pole Padlocking Device Handle Blocking Device (1 & 2 Pole) ECPLD1 ECPLD2 ECQLN3 ECQL1 18

21 Air Conditioning Disconnects Fused and Non-fused Features: Flexibility L amperes L 240 volts A.C. L Padlock provisions L Horsepower rated L 10,000 A.I.C. L New models available with internal GFCI receptacle L Removable door L Ample wiring space Steel AC Disconnects Ampere Disconnect type Rugged Durability L Noryl thermoplastic and powder coated G90 steel enclosures are corrosion resistant and extremely durable giving long maintenance free service L Copper conductors L Raised mounting embosses Horse power Dimensions (inches) H W D 30 Fused pullout LF Fused pullout LF Non-fused pullout LN Air Conditioning Disconnects - Fused & Non-Fused 60 Non-automatic switch LNAS Plastic AC Disconnects Ampere Disconnect type Horse power Dimensions (inches) H W D 30 Fused pullout LF2030PL Fused pullout LF2060PL Non-fused pullout LN2060PL Non-fused pullout LN2060PLX Steel AC Disconnects with 15 Amp GFCI Receptacle Ampere Disconnect type Horse power Dimensions (inches) H W D 30 Fused pullout LF2030GFCI Fused pullout LF2060GFCI Non-fused pullout LN2060GFCI Non-automatic switch LNAS2060GFCI Wire Range Table Copper Aluminum Connector Solid Stranded Solid Stranded Line #14-8 #14-3 #12-8 #12-3 Load #14-8 #14-3 #12-8 #12-3 Neutral #12-8 #12-2 #12-8 #12-2 Equip. grnd. #12-8 #12-2 #12-8 #

22 Spa Panels For use as spa/hot tub service disconnect Spa Panels - 50A and 60A Features: L UL Listed L Factory installed, 2-pole 50A or 60A GFCI breaker for 240V ground fault protection L NEMA Type 3R outdoor enclosure L 2 extra spaces (4 circuits manimum) for additional circuit breakers L 125 Amp rated interior L Factory installed 5 position ground bar L Closure plate included L Compact enclosure size L Convenient standard package of 1 L Uses reliable Siemens circuit breakers 2-Pole GFCI breaker Dimensions (inches) H W D 50A LGSPA50 60A LGSPA /4- dead front enclosure hub cover plate included 6 20

23 Connector Lugs H55890 #6-350 kcmil 3/8 H #6-350 kcmil 3/8 H56734 #6-250 kcmil H37892 #4-500 kcmil H57606-K #6-350 kcmil 3/8 H56476 #3/0-800 kcmil H60162 (1) #4-600 kcmil [or] (2) #1/0-250 kcmil H61300 (1) #4-600 kcmil [or] (2) #1/0-250 kcmil Connector Lugs H58022 (2) #6-250 kcmil 3/8 H56732 (2) #4-350 kcmil H (2) #4-350 kcmil H (2) #4-350 kcmil 3/8 H56732-M (2) #4-500 kcmil H (3) #6-250 kcmil H56426 (4) #6-350 kcmil H56477 #3/0-800 kcmil H56425 (2) #6-350 kcmil H56425-M (2) #4-500 kcmil H58852 #3/0-800 kcmil H56733 #3/0-800 kcmil H56427 (2) #6-350 kcmil H56427-M (2) #4-500 kcmil H58853 (2) #6-350 kcmil H

24 Connector Lugs Pressure type lugs for Talon s stud type meter mounting devices are made of 6061-T6 aluminum to provide high strength and high conductivity. All lugs are tin-plated to ensure low contact resistance and to reduce corrosion. Allen or hex head pressure screws are furnished to provide excellent conductor spread for maximum binding action with the lug. All Talon lugs are listed with Underwriters Laboratories. Connector Lugs Pressure lug connectors for meter mounting devices Device type Conductor size opening Pressure screw head Dimensions* (inches) L W H Antirotation feature #6-350 kcmil 13/32 9/16 Hex 2-1/4 1-1/8 1-1/4 No H55890 HQ-4S #6-350 kcmil 13/32 5/16 Allen 2-1/4 1-1/8 1-1/4 No H HQ-5 S #6-350 kcmil 13/32 3/8 Allen 2-1/4 1-1/8 1-1/4 No H57606-K HQ-7S (2) #6-250 kcmil 13/32 5/16 Allen 2-3/16 1-5/8 1-3/16 No H58022 HQ-4D #4-500 kcmil 9/16 3/8 Allen 2-13/16 1-1/2 1-9/16 No H37892 HQ-5DM HQ-7D, HQ-7DF (1) #4-600 kcmil or (2) #1/0-250 kcmil 9/16 Allen 2-13/16 1-3/8 1-13/16 Yes No H60162 H61300 K-4,5,7 (2) #6-350 kcmil 9/16 5/16 Allen 2-7/8 1-57/64 1-1/4 No H56425 K-4,5,7 (2) #4-500 kcmil 9/16 3/8 Allen 2-13/16 2-1/16 1-9/16 No H56425-M K-4 (4) #6-350 kcmil 9/16 5/16 Allen 2-7/8 3-15/16 1-1/4 No H56426 K-4,5,7 (2) #6-350 kcmil 9/16 5/16 Allen 4-15/16 1-1/8 2-1/16 Yes H56427 K-4,5,7 (2) #2-500 kcmil 9/16 3/8 Allen 4-1/4 1-1/8 1-13/16 Yes H56427-M K-5,7 #3/0-800 kcmil 9/16 Allen 3-1/4 1-5/ /16 Yes H56476 K-4,5,7 #3/0-800 kcmil 9/16 Allen 3-1/4 1-5/ /16 Yes H56477 K-5,7 (2) #4-500 kcmil 9/16 3/8 Allen 2-13/16 2-5/32 1-9/16 No H56490 K-5,7 (2) #4-350 kcmil 9/16 5/16 Allen 2-7/8 1-59/64 1-1/4 Yes H56732 K-5,7 (2) #4-350 kcmil 9/16 5/16 Allen 2-7/8 1-59/64 1-1/4 No H K-5,7 (2) #4-500 kcmil 9/16 3/8 Allen 2-13/16 2-5/ /16 Yes H56732-M K-4,5,7 #3/0-800 kcmil 9/16 Allen 4-3/16 1-3/4 2-3/8 Yes H56733 K-4,5,7 (Grd.) #6-250 kcmil 9/16 5/16 Allen 2-9/16 1-9/32 1-3/16 No H56734 K-4,5,7 #3/0-800 kcmil 9/16 Allen 3-15/16 1-3/4 1-13/16 Yes H58852 K-4,5,7 (2) #6-350 kcmil 9/16 5/16 Allen 3-15/16 1-1/8 1-1/2 Yes H58853 K-4,5,7 (3) #6-250 kcmil 9/16 5/16 Allen 2-7/8 2-31/64 1-7/16 Yes H K-4 extender 1/2-20 x 1-7/8 9/16 None 4-1/4 1-1/4 2-3/8 Yes H Lug Extender Dimensions (inches) Device type opening size W H D K-4 9/16 1/2-20 x 1-7/8 4-1/4 1-1/4 2-3/8 H ** * Dimensions do not include height of pressure screw with conductor installed. ** Includes nut and washer assembly and washer. H W L 22

25 Accessories Removable hub kits Sealing rings Conduit Size (inches) Description RX type hubs small 1 H /4 H Stainless Steel Snap Type H54602 Removable hub Cover plate 1-1/2 H H /2 H Cover plate - steel H Cover plate - aluminum H HD Type Hubs Large 3 H /2 H H Cover plate - steel H56933 Cover plate - aluminum H Large to small adaptor - H steel HD to RX Large to small adaptor - aluminum HD to RX H Stainless Steel Screw Type Black plastic meter opening cover Clear plastic meter opening cover (with plug-in feet) H H39968 UAT, UAS, MQ and HQ Accessories Description Insulated 5th terminal kit - Type AS, AT only Grounded 5th terminal kit - Type AS, AT only Anti -Inversion Clip for HQ Sockets H H H H59676 Accessories K-Base Accessories MQ 5th terminal kit - 9:00 H Description K-7 only Isolated Neutral Kit H HQ 5th terminal kit - 9:00 w/o wire HQ 5th terminal kit - 9:00 w/ wire HQ 5th teminal kit - 9:00 w/ 9 lead H H H * K-7 Rotary Bypass Amp rated K-7 Rake Type Bypass Amp rated, temp use only K-4 Rake Type Bypass Amp rated, temp use only Insulated T-Handle Wrench Magnetic Hex Socket* *For use on meter Not for use on K7 H69623 H58888 H56495 H H *For use with side wired devices only. Grey touch-up paint -TUP61, 12 oz. can Ground strap kit, HQ-5 Ground lug kit, #14-2 Add-on grounding lug for HQ/HQU HQ isolated neutral kit (for 200A only, not for use with 320A) *Includes neutral and isolation block Neutral isolation kit for HQ (for 200A only, not for use with 320A) *Isolates existing neutral Insulated Jumper XPT H36503 H55303 H * H * H /8 Barrel Lock Guard HBRLLOCK 23

26 Terms of Sale, Meter Mounting Device Applications Terms of sale Transportation Charges: Prices listed are F.O.B. factory with freight prepaid and allowed on all shipments of orders of $1,000 net or more for single shipments to one location. Terms of sale - meter mounting device applications Minimum Billing: $400 net plus transportation charges. Cancellation: Orders accepted by the factory can be cancelled only with the factory s consent and upon payment to the seller of reasonable charges incurred by the seller which will indemnify the seller against loss. Returns: Goods may not be returned to Talon without written authorization from the factory. A minimum 20% restocking charge will be applicable on all returned goods. Credit will be given only for current production items in unopened cartons. All transportation charges paid by Talon will be deducted from such credit. Terms: Standard/Stock Products: 2% 10th net 25th for invoices dated the 1st through the 15th of the month. 2% 25th net 10th for invoices dated the 16th through the 31st of the month. Meter Mounting Device Applications Electrical service 1-phase Service type Self-contained, 3 wire Meter form 2S Socket type Standard socket 4 jaw 100A AT-1 4 jaw 200A AT-3, AT-4, MQ-4, HQ-4 2SE 4 jaw 320A HQ-4S, HQ-4D Self-contained, bolt-in 2K K4-400/480A K-4, K-4UT Transformer-rated, 2 wire 3S! 5 jaw 20A HQ-6T, HQ-6TS, PTS-6 Transformer-rated, 3 wire 4S! 6 jaw 20A HQ-6T, HQ-6TS 3-phase, 3 wire or network Self-contained 12S 5 jaw 100A MQ-5, HQ-5 12S 5 jaw 200A MQ-5, HQ-5 12SE 5 jaw 320A HQ-5SWT, HQ-5D Self contained bolt-in 12K K-5 480/600A K-5 Transformer-rated 5S 8 jaw 20A HQ-8T, HQ-8TS, PTS-8 3-phase, 4 wire 14S Self-contained 15S 7 jaw 100/200/320A MQ-7, HW-7 16S 14K Wye Self-contained, bolt-in 15K K-7 480/600A K-7, K-7T 16K 6S Transformer-rated 8S 13 jaw 20A HQ-13T, HQ-13TS, PTS- 13 or Delta 9S 24

27

28 Represented by: Pollart Electrical Sales 1231 Ford Road Bensalem. PA Phone: (215) Fax: (215) Talon Meter Mounting Devices Siemens Industry, Inc Triangle Parkway Norcross, GA Subject to change without prior notice Order No.: RPSA-LG All rights reserved Printed in USA 2013 Siemens Industry, Inc. The information provided in this brochure contains merely general descriptions or characteristics of performance which in case of actual use do not always apply as described or which may change as a result of further development of the products. An obligation to provide the respective characteristics shall only exist if expressly agreed in the terms of contract. All product designations may be trademarks or product names of Siemens AG or supplier companies whose use by third parties for their own purposes could violate the rights of the owners.