Customer service Toll free : T F

Transcription

1

2 SOLENO CONTACTS Headquarters Soleno Inc. 1160, route 133 C.P. 837, St-Jean-sur-Richelieu, QC J2X 4J5 CANADA T F Customer service Toll free : T F service.ontario@soleno.com Plants and distribution centers Iberville 1160, route 133 St-Jean-sur-Richelieu, QC J2X 4J5 CANADA St-Nicolas 1185, chemin Industriel St-Nicolas, QC G7A 1B2 CANADA Soleno Textiles 1261 rue Berlier Laval, QC H7L 3Z1 CANADA Ste-Madeleine 2676, chemin Plamondon Ste-Madeleine, QC J0H 1S0 CANADA St-Louis-de-Blandford 130, rue Industriel St-Louis-de-Blandford, QC G0Z 1B0 CANADA McAdam 64, Northlane McAdam, NB E6J 1K6 CANADA Embrun 1241, Notre-Dame Embrun, ON K0A 1W0 CANADA 2

3 FREIGHT POLICY ZONE 1 ZONE 2 ZONE 3 ZONE 4 ZONE 5 ZONE 6 ZONE 7 ZONE 8 ZONE 9 ZONE 10 LESS THAN 1 500$ 18% 19% 20% 22% 24% 26% 28% 31% 33% FREIGHT CHARGES PER ORDER VALUE BETWEEN 1 500$ & 2 999$ 8% 9% 11% 13% 15% 17% 19% 21% 23% BETWEEN 3 000$ & 5 999$ 6% 7% 9% 11% 13% 15% 17% 19% 21% 9 THINGS TO REMEMBER REGARDING OUR FREIGHT POLICY : MORE THAN 5 999$ 5% 6% 7% 8% 10% 12% 14% 16% 18% APPROXIMATE TIME OF DELIVERY 2 DAYS 2 DAYS 2 DAYS 2 DAYS 3 DAYS 4 DAYS 4 DAYS 5 DAYS 5 DAYS 1- Minimum order : A 25$ administrative fee is applicable on all orders with a value of less than $250. This applies on all orders that are either shipped by Soleno, customer pick-ups or an outside transport (including couriers such as Purolator, Fedex or any others). 2- Visit our website at and click on ''Find your zone'' in the "Resource Center" to find your delivery zone or contact our Customer Service Department. 3- The applicable freight charge % is always based on the original amount of the order excluding the sales tax. 4- The applicable freight charge % is always determined by the delivery address and not the invoice address. 5- There are no discount allowances for customer pick-ups. 6- The fuel surcharge % is already included in the applicable freight charges. 7- The freight charge % for delivering back order products is based on the original order amount. 8- In order to ease the loading and unloading of certain products and to insure the safety of our drivers, Soleno reserves the right to send certain items in wooden crates. A $75 fee will be charged per crate, which will be credited in full if the crates are returned in their original state. 9- Freight rates may vary on orders containing one or more oversized products requiring a special transportation permit. 3

4 10 TABLE OF CONTENTS CONTACTS 2 DRAIN True 75 mm (3 in) to 250 mm (10 in) ,005 1,005 True ue 15 SOLIFLEX 9 True 100 mm (4 in) ,000 2,000 False ue 20 DRAIN ACCESSORIES 10 True Interior coupling 10 Exterior double bell coupling 10 Split coupling 10 Interior end cap degree elbow 11 Reducer 11 Tee 11 Reducing tee 12 Tee-wye 12 Wye 12 Downspout adapter 12 HDPE adapter for PVC 13 Regular tape (white) 13 Extensible tape (black) 13 Sump well 14 Sump well cover 14 Radon sump basin 14 Radon sump basin cover 14 Plastic grate 15 Plastic disk grate 15 Steel reinforced plastic grate 15 Interior stainless steel grate 16 Removable stainless steel grate 16 Stainless steel grate 16 Small hole vertical drain (Hickenbottom) 17 Large hole vertical drain (Hickenbottom) 17 Vertical drain tee 17 Vertical drain reducer 17 Tap Tee 18 Drainage flag 18 Drainage outlet sign 18 Drainage chimney 18 Fibro-Drain floor drain 19 Fibro-Drain radon floor drain 19 Tuf-Tite floor drain 19 Hydrain full kit 20 Hydrain replacement grids 20 4

5 TABLE OF CONTENTS 20 40,002 40,002 True ue 30 SOLFLO True 100 mm (4 in) to 300 mm (12 in) ,107 1,107 True ue 40 SOLFLO MAX (SMOOTH INTERIOR AND CORRUGATED EXTERIOR) - R True 300 mm (12 in) to 900 mm (36 in) ,214 1,214 True ue 45 TURBULENCE 23 True 450 mm (18 in) and 600 mm (24 in) , ,001 True ue 50 SOLFLO MAX (SMOOTH INTERIOR AND CORRUGATED EXTERIOR) - R True 100 mm (4 in) to 250 mm (10 in) mm (12 in) to 900 mm (36 in) ,025 1,025 True ue 70 SOLFLO MAX (SMOOTH INTERIOR AND CORRUGATED EXTERIOR) 26 True mm (42 in) to mm (60 in) ,028 1,028 True ue 80 SOLFLO AND SOLFLO MAX COUPLINGS AND ACCESSORIES 27 True End cap 27 Split coupling 27 Clamp coupling ,000 41,000 True ue Repair coupling 28 Mar Mac flexible coupling 28 Mar Mac clamping tool 28 Double bell coupling 29 End cap degree elbow degree elbow degree elbow degree elbow - 3 sections 34 Cross 35 Reducing cross 36 Reducer 37 Tee 38 Reducing tee 39 Wye 40 Reducing wye 41 Manhole adapter for PVC DR35 entry 42 Manhole adapter for concrete entry 42 Manhole adaptor - Soleno male format (concrete) 43 Manhole adaptor - Soleno female format (concrete) 43 Manhole adaptor - Male outlet with o-ring gasket 43 Universal sol-tee 44 Universal sol-tee saw bit 44 Gasket ,000 62,000 True ue 85 BEVELLED PIPE (DRIVEWAY CULVERT) 45 True Pipe 45 5

6 TABLE OF CONTENTS 85 64,500 64,500 True ue 90 BEVELLED PIPE (ROADWAY USE) 46 True Pipe ,500 65,500 True ue 95 BEVELLED PIPE 47 True Bevelled end ,000 66,000 False ue 100 CHANNEL PIPE 48 True Pipe and option ,000 68,000 True ue 110 BEAVER BARRIER 49 True Barrier and option ,000 70,000 True ue 120 ENVIRO-SPAN 50 True Straight module ,000 73,000 True ue 130 FILCOTEN ROBUST 51 True Channel and options ,000 80,000 True ue 140 FILCOTEN INFRA WITH 4 mm GALVANIZED STEEL ANGLES 52 True Channel and options ,000 87,000 True ue 150 FILCOTEN INFRA WITH 5 mm CAST IRON ANGLES 56 True Channel and options , ,000 True ue 170 WEHOLITE (SMOOTH INTERIOR AND EXTERIOR) 60 True Pipe and option , ,000 True ue 175 DUROMAXX 61 True Pipe and option , ,001 False ue 180 SMOOTH EXTERIOR AND SMOOTH INTERIOR 62 True Pipe and options , ,000 True ue 190 SMOOTH EXTERIOR CATCH BASIN 63 True Catch basin and options , ,000 True ue 200 SMOOTH EXTERIOR MANHOLE 65 True Manhole and options , ,000 True ue 210 CORRUGATED CATCH BASIN 67 True Catch basin and options , ,000 True ue 220 CAST IRON 69 True Frame and grate kit , ,000 False ue 225 MANHOLE AND CATCH BASIN RISER 70 True 2 corrugation riser 70 3 corrugation riser , ,200 True ue 237 PUISTAR 71 True Kit and options , ,103 True ue 240 MONOLITHIC CONNECTOR 72 True Main line , ,000 True ue 250 PRE-TREATMENT CATCH BASIN 73 True Catch basin and options , ,000 True ue 6

7 260 TABLE OF CONTENTS PERCOLATION WELL 74 True Well , ,000 False ue 265 LINEAR CATCH BASIN 75 True Linear catch basin , ,000 False ue 270 STORM WATER SETTLING AND SEPARATION UNIT 76 True Unit , ,000 False ue 280 OVERFLOW 77 True Unit , ,000 False ue 283 STORMCHAMBER 78 True Chamber and options , ,000 True ue 285 HYDROSTOR HS75 79 True Chamber and options , ,006 True ue 286 HYDROSTOR HS True Chamber and options , ,012 True ue 287 HYDROSTOR PRETREATMENT SYSTEM 81 True Unit and options , ,007 True ue 291 NEMO 83 True mm (6 ft) tubular retention tank and options mm (8 ft) tubular retention tank and options mm (10 ft) tubular retention tank and options , ,042 True ue 300 AQUA-SWIRL 89 True Offline 89 Inline 89 Cast iron , ,000 True ue 310 AQUA-FILTER 90 True Unit 90 Cast iron , ,000 True ue 320 CORRUGATED STEEL PIPE 91 True Pipe and band , ,000 True ue 330 GEOTEXTILE 92 True Epurtex 92 TX-80 - BNQ Certified 92 TX BNQ Certified 92 TX-F , ,000 True ue 340 FLOW REGULATOR 93 True Plug style flow regulator 93 Plater flow regulator 93 Vortex flow regulator , ,000 True ue PICK-UP POLICY 94 RETURN MERCHANDISE POLICY 95 TRANSPORTATION SERVICE FOR THE RETURN OF MERCHANDISE 96 GENERAL SALES TERMS AND CONDITIONS 97 GENERAL SALES TERMS AND CONDITIONS (CONT'D) 98 7

8 DRAIN 1,00 Length Description Type Micron Qty T/B* Price / Meter 75 mm (3 in) m Non-perforated 1 NA $3, m Perforated 2 NA $3,99 45 m Nonwoven polyester NA $ 4, m Nonwoven polyester NA $ 5, mm (4 in) 75 m Non-perforated 1 68/ $3,14 75 m Perforated 2 68/ $3,14 75 m Nonwoven polypropylene Mega / $ 4,09 75 m Woven polyester Mega / $ 4,09 45 m Non-perforated 1 120/ $3,14 45 m Perforated 2 120/ $3,14 45 m Perforated Mega 3 120/ $3,14 45 m Nonwoven polypropylene Mega / $ 4,09 45 m Woven polyester Mega / $ 4,09 30 m Non-perforated 1 120/ $3,14 30 m Perforated 2 120/ $3,14 30 m Nonwoven polypropylene Mega / $ 4,09 30 m Woven polyester Mega / $ 4,09 15 m Non-perforated 1 NA/ $3,50 15 m Perforated 2 NA/ $3,50 15 m Nonwoven polypropylene Mega NA/ $ 4,53 15 m Woven polyester Mega NA/ $ 4,53 3 m Non-perforated 1 NA/ $3,50 3 m Perforated 2 NA/ $3,50 3 m Nonwoven polyester NA/ $ 4,53 3 m Nonwoven polypropylene Mega NA/ $ 4, mm (6 in) 30 m Non-perforated 1 NA $8,94 30 m Perforated 2 NA $8,94 30 m Nonwoven polypropylene Mega NA $ 11,61 30 m Woven polyester NA $ 11, mm (8 in) 6 m Non-perforated 1 NA $ 18,88 6 m Perforated 2 NA $ 18,88 6 m Nonwoven polyester NA $ 23,13 6 m Nonwoven polypropylene NA $ 23, mm (10 in) 6 m Non-perforated 1 NA $ 25,86 6 m Perforated 2 NA $ 25,86 6 m Nonwoven polyester NA $ 30,05 6 m Nonwoven polypropylene NA $ 30,05 * Qty T/B : Estimated quantity per full truck load/bundle. 8

9 SOLIFLEX 2,00 Length Description Type Micron Qty T/B* Price / Meter 100 mm (4 in) 45 m Non-perforated $4,55 45 m Perforated Type $4,55 45 m Nonwoven polypropylene Type $5,92 NEW! BNQ (Type 1 - Type 3) certified. Conforms to the National building code of Canada. See our brochure at Fits perfectly with Soleno's standard range of drainage accessories with external connections. Its flexibility allows 90 turns with a tight radius of curvature. 9

10 x DRAIN ACCESSORIES 5,00 Interior coupling Qty B/C* 75 mm (3 in) NA 1M0031A $ 9, mm (4 in) 10/750 1M0040 $ 4, mm (6 in) 10/120 1M0060N $ 7, mm (8 in) 10/NA 1M0080 $ 13,75 1M0040 Exterior double bell coupling 100 mm (4 in) 150 mm (6 in) 200 mm (8 in) 250 mm (10 in) Qty B/C* NA NA NA NA 3MCC004C 3MCC006C 3MCC008C 3MCC010C $ 6,80 $ 14,62 $ 20,54 $ 35,30 x 3MCC004C x Split coupling 100 mm (4 in) 150 mm (6 in) 200 mm (8 in) 250 mm (10 in) Qty B/C* NA/50 5/640 5/315 30/NA 1M0041 1M0061 1M0081 1M1010 $ 3,68 $ 9,55 $ 13,00 $ 27,62 1M0061 x Interior end cap 75 mm (3 in) 100 mm (4 in) 150 mm (6 in) Qty B/C* NA 10/ /360 1B0035A 1B0045 1B0065 $ 4,70 $ 4,56 $ 7,73 1B0045 * Quantity per bag/crate. 10

11 x DRAIN ACCESSORIES 8,00 90 degree elbow Qty B/C* 100 mm (4 in) 10/240 1C0049 $ 10,20 x Reducer 100 mm x 75 mm (4 in x 3 in) 150 mm x 100 mm (6 in x 4 in) 200 mm x 150 mm (8 in x 6 in) 250 mm x 200 mm (10 in x 8 in) Qty B/C* NA 10/240 5/NA 5/NA 1R0043 1R0064 1R0086 1R1008 $ 8,76 $ 10,33 $ 16,34 $ 29,88 1R0064 Tee 1T mm (3 in) 250 mm (10 in)** 300 mm (12 in)*** Qty B/C* NA 3/NA 3/NA 1T0033A 1T1010 1T1212 ** The riser can reduce from 250mm (10'') to 200mm (8'') to 150mm (6'') to 100mm(4''). *** The riser can reduce from 300mm (12'') to 250mm (10'') to 200mm (8''). $ 18,94 $ 83,53 $ 139,34 * Quantity per bag/crate. 11

12 x DRAIN ACCESSORIES 12,00 Reducing tee Qty B/C* 100 mm x 100 mm x 75 mm (4 in x 4 in x 3 in) 10/100 1T0043 $8, mm x 150 mm x 100 mm (6 in x 6 in x 4 in) 5/40 1T0064 $ 21, mm x 150 mm x 100 mm (8 in x 6 in x 4 in) 5/25 1T8864 $ 39,48 1T0064 x Tee-wye 100 mm (4 in) 150 mm (6 in) Qty B/C* 10/120 5/40 1TY044 1TY066 $ 9,07 $ 20,33 1TY044 x Wye 100 mm (4 in) 150 mm (6 in) Qty B/C* 10/120 5/NA 1DY004 1DY006* * The riser can reduce from 150 mm (6'') to 125 mm (5'') to 100mm (4''). $ 13,80 $ 38,92 1DY006 x Downspout adapter Color White Black 100 mm (4 in) 100 mm (4 in) Qty B/C* 10/480 1G004 $ 8,09 10/480 1G004N $ 8,09 1G004 * Quantity per bag/crate. 12

13 x DRAIN ACCESSORIES 16,00 HDPE adapter for PVC Qty B/C* 100 mm (4 in) 4/340 1ADRC04 $ 16,71 Regular tape (white) Dimension(s) 48 mm x 50 m (2 in x 164 ft) Qty B/C* NA/24 1ZRUBAW $ 17,29 x x Extensible tape (black) Dimension(s) 52mm x m (2 in x 108 ft) mm x m (4 in x 100 ft) Qty B/C* NA/24 NA 1ZRUBAS 1ZRUBAS4 $ 17,29 $ 35,56 * Quantity per bag/crate. 13

14 DRAIN ACCESSORIES 19,00 Sump well Dimension(s) Qty B/C* 500 mm x 600 mm (20 in x 24 in) NA 1UCU025 $ 62,41 Sump well cover Dimension(s) 500 mm (20 in) Qty B/C* 5/NA 1UCV025 $ 34,54 Radon sump basin Dimension(s) Qty B/C* 450 mm x 600 mm (18 in x 24 in) NA 1UCURADON $ 86,34 See our radon gas mitigation and capture solution brochure at Radon sump basin cover Dimension(s) 450 mm (18 in) Qty B/C* NA 1UCVRADON $ 70,58 * Quantity per bag/crate. 14

15 x DRAIN ACCESSORIES 23,00 Plastic grate 100 mm (4 in) 150 mm (6 in) 1TTG04C Qty B/C* 10/850 5/325 1TTG04C 1TTG06C $ 9,45 $ 18,13 Plastic disk grate 100 mm (4 in) Qty B/C* 10/150 1TTG04D $ 2,08 x x Steel reinforced plastic grate 100 mm (4 in) 150 mm (6 in) 200 mm (8 in) Qty B/C* 10/850 NA/220 NA/200 1TTG04AG 1TTG06AG 1TTG08AG $ 24,58 $ 28,11 $ 59,02 1TTG04AG * Quantity per bag/crate. 15

16 DRAIN ACCESSORIES 26,00 Interior stainless steel grate Qty B/C* 100 mm (4 in) 10/NA 1TTG04AF $ 25, mm (6 in) 5/NA 1TTG06AF $ 28, mm (8 in) NA 1TTG08AF $ 46, mm (10 in) NA 1TTG10AF $ 59, mm (12 in) NA 1TTG12AF $ 69, mm (15 in) NA 1TTG15AF $ 108,55 x 1TTG04AF Removable stainless steel grate 200 mm (8 in) 300 mm (12 in) 375 mm (15 in) 450 mm (18 in) 525 mm (21 in) 600 mm (24 in) 750 mm (30 in) 1TTG12AI 900 mm (36 in) mm (42 in) mm (48 in) Qty B/C* NA NA NA NA NA NA NA NA NA NA 1TTG08AI 1TTG12AI 1TTG15AI 1TTG18AI 1TTG21AI 1TTG24AI 1TTG30AI 1TTG36AI 1TTG42AI 1TTG48AI $ 74,49 $ 81,99 $ 89,70 $ 92,27 $ 114,37 $ 120,49 $ 134,60 $ 148,72 $ 205,05 $ 249,08 x Stainless steel grate 100 mm (4 in) 150 mm (6 in) 200 mm (8 in) 250 mm (10 in) Qty B/C* NA NA NA NA 1TTG04A 1TTG06A 1TTG08A 1TTG10A $ 71,65 $ 80,05 $ 110,37 $ 121,58 1TTG04A * Quantity per bag/crate. 16

17 x DRAIN ACCESSORIES 30,00 Small hole vertical drain (Hickenbottom) Qty B/C* 125 mm (5 in) NA 1VAP04 $ 71, mm (6 in) NA 1VAP06 $ 94, mm (8 in) NA 1VAP08 $ 145, mm (10 in) NA 1VAP10 $ 222,22 1VAP04 x Large hole vertical drain (Hickenbottom) 125 mm (5 in) 150 mm (6 in) 200 mm (8 in) 250 mm (10 in) Qty B/C* NA NA NA NA 1VAG04 1VAG06 1VAG08 1VAG10 $ 71,96 $ 94,13 $ 145,39 $ 222,22 1VAG04 x Vertical drain tee 125 mm (5 in) 150 mm (6 in) 200 mm (8 in) 250 mm (10 in) Qty B/C* NA NA NA NA 1VAT04 1VAT06 1VAT08 1VAT10 $ 71,96 $ 94,13 $ 145,39 $ 222,22 1VAT04 Vertical drain reducer Qty B/C* 125 mm x 100 mm (5 in x 4 in) NA 1VAR06 $ 20,29 x * Quantity per bag/crate. 17

18 DRAIN ACCESSORIES 34,00 Tap Tee 100 mm (4 in) 100 mm (4 in) Qty B/C* NA/50 NA/50 NEW! 33SL04 33SL04LONG $ 5,85 $ 7,53 ** Used to connect a 100 mm (4 in) drain to a 150 mm (6 in), 200 mm (8 in) or 250 mm (10 in) drain by insertion with a 3 7/8 in hole saw. 33SL04 *** Used to connect a 100 mm (4 in) drain to a 250 mm (10 in) or 300 mm (12 in) drain by insertion with a 3 7/8 in hole saw. Drainage flag Color Orange Blue Yellow Qty B/C* 100/ / / $ 0,64 $ 0,64 $ 0, Pink and lime green flags also offered in 30 in. (Standard) Orange flags also offered in 36 in. ( : ) Drainage outlet sign Qty B/C* NA 1PDRAEN $ 14,30 Drainage chimney Description Drainage chimney End cap Drainage chimney End cap 100 mm (4 in) 100 mm (4 in) 150 mm (6 in) 150 mm (6 in) Qty B/C* NA/30 10/NA NA NA B100CG** B150CG** $ 60,31 $ 10,30 $ 116,73 $ 17,51 ** Two end caps - sold separately - required per chimney (gaskets included) * Quantity per bag/crate. 18

19 DRAIN ACCESSORIES 37,00 Fibro-Drain floor drain Dimension(s) Description 300 mm x 300 mm (12 in x 12 in) Complete drain (2 pcs) 1ZD1212 $ 62, mm x 300 mm (12 in x 12 in) Floor drain cover 1ZD1212 1ZD1212C $ 37, mm x 405 mm (14 in x 16 in) Drain (cover not included) 1ZD1416P $ 52, mm x 450 mm (16 in x 18 in) Plastic cover for 1ZD1416P 1ZD1618C $ 49, mm x 600 mm (18 in x 24 in) Drain (cover not included) 1ZD1824P $ 76, mm x 635 mm (19 in x 25 in) Plastic cover for 1ZD1824P 1ZD1925C $ 64, mm x 635 mm (19 in x 25 in) Steel cover for 1ZD1824P 1ZD1925CA $ 84, ZD1212 Fibro-Drain radon floor drain Dimension(s) Description 495 mm x 641 mm (20 in x 25 in) Cover for 1ZD2425P 1ZD1925E $ 127, mm x 705 mm (22 in x 28 in) Drain (cover not included) 1ZD2425P $ 140, Models shown 1ZD2425P & 1ZD1925E Tuf-Tite floor drain Dimension(s) Description 279 mm x 381 mm (11 in x 15 in) Complete drain (5 pcs) 1ZD115 $ 84, mm x 381 mm (11 in x 15 in) Floor drain 11x11x15 (4pcs) 1ZD115NG $ 145, mm x 381 mm (11 in x 15 in) Cover for 1ZD115 1ZD115C $ 65, mm (4 in) Drain seal (blue) 1ZDANB $ 10, mm (4 in) DR-35 seal (yellow) 1ZDANJ $ 12, mm (4 in) Plug (orange) 1ZDBOUO $ 12, ZD115 19

20 DRAIN ACCESSORIES 39,00 Hydrain full kit Dimension(s) Description Kit/P* 7.5 in x 24 in x 12 in Hydrain System 4/40 HYDRKIT $ The Hydrain System adapts perfectly to all types of 100 mm (4 in) drainage pipes. NEW! Hydrain replacement grids HYDRKIT *Kit by pallet Description Honeycomb grids * HYDRGRID $ * A kit consists of 2 (two) honeycomb grids. HYDRGRID NEW! 20

21 SOLFLO 1,10 Length Description kpa Price / Meter 100 mm (4 in) SOL 30 m Non perforated R $9,12 SOL 30 m Perforated R $9,12 SOL 30 m 100 mm (4 in) R $ 12, mm (6 in) SOL 30 m Non perforated R $ 15,44 SOL 30 m Perforated R $ 15,44 SOL 30 m 150 mm (6 in) R $ 21, mm (8 in) SOL 6 m Non perforated R $ 24,83 SOL 6 m Perforated R $ 24,83 SOL 6 m 200 mm (8 in) R $ 30, mm (12 in) SOL 6 m Non perforated R $ 36,35 SOL 6 m Perforated R $ 41,95 SOL 6 m Perforated & filtered (Routex III-IV) R $ 50,36 Rope option is available to simplify passage of ovalization template. Contact our customer service department for pricing and lead time on non-listed items. 21

22 SOLFLO MAX (SMOOTH INTERIOR AND CORRUGATED EXTERIOR) - R210 1,20 Length Description kpa Price / Meter Plain end C 300 mm (12 in) SOL 6 m Non perforated R $ 40,14 $ 42,24 SOL 9 m Non perforated R $ 40,14 SOL 12 m Non perforated R $ 40,14 SOL 6 m Perforated R $ 48,00 $ 52,42 SOL 6 m Perforated & filtered (Routex III-IV) R $ 67,31 $ 72, mm (15 in) SOL 6 m Non perforated R $ 67,78 $ 70,75 SOL 9 m Non perforated R $ 67,78 SOL 12 m Non perforated R $ 67,78 SOL 6 m Perforated R $ 75,31 $ 80,39 SOL 6 m Perforated & filtered (Routex III-IV) R $ 91,45 $ 99, mm (18 in) SOL 6 m Non perforated R $ 85,51 $ 94,36 SOL 9 m Non perforated R $ 85,51 SOL 12 m Non perforated R $ 85,51 SOL 6 m Perforated R $ 101,62 $ 106,18 SOL 6 m Perforated & filtered (Routex III-IV) R $ 123,55 $ 133, mm (21 in) SOL 6 m Non perforated R $ 123,91 $ 135,73 SOL 9 m Non perforated R $ 123,91 SOL 12 m Non perforated R $ 123,91 SOL 6 m Perforated R $ 133,65 $ 148,51 SOL 6 m Perforated & filtered (Routex III-IV) R $ 163,00 $ 174, mm (24 in) SOL 6 m Non perforated R $ 136,34 $ 165,55 SOL 9 m Non perforated R $ 136,34 SOL 12 m Non perforated R $ 136,34 SOL 6 m Perforated R $ 167,21 $ 188,11 SOL 6 m Perforated & filtered (Routex III-IV) R $ 206,41 $ 235, mm (30 in) SOL 6 m Non perforated R $ 220,44 $ 247,94 SOL 9 m Non perforated R $ 220,44 SOL 12 m Non perforated R $ 220,44 SOL 6 m Perforated R $ 258,20 $ 275,86 SOL 6 m Perforated & filtered (Routex III-IV) R $ 318,73 $ 344, mm (36 in) SOL 6 m Non perforated R $ 350,30 $ 390,61 SOL 9 m Non perforated R $ 350,30 SOL 6 m Perforated R $ 400,90 $ 443,87 SOL 6 m Perforated & filtered (Routex III-IV) R $ 493,71 $ 554,84 Legend : Plain end : No coupling C : Soil tight (snap bell) Identification : For identification purposes, Solflo Max R210 pipes include an orange line. Contact our customer service department for pricing and lead time on non-listed items. 22

23 TURBULENCE ###### Length Description kpa Price / Meter Plain end C 450 mm (18 in) 6 m Non perforated R $ 90,03 $ 99, mm (24 in) 6 m Non perforated R $ 154,92 $ 174,23 See our brochure at Our Turbulence line of products is available out of Ste-Madeleine, Quebec only. 23

24 SOLFLO MAX (SMOOTH INTERIOR AND CORRUGATED EXTERIOR) - R320 1,01 Price / Meter Length Description kpa Qty* C CGI 100 mm (4 in) 6 m Non perforated R $ 15,04 $ 19,38 6 m Perforated R $ 17,43 6 m 100 mm (4 in) R $ 24, mm (6 in) 6 m Non perforated R $ 25,66 $ 32,52 6 m Perforated R $ 29,50 6 m 150 mm (6 in) R $ 36, mm (8 in) 6 m Non perforated R $ 40,20 $ 54,80 6 m Perforated R $ 46,81 6 m 200 mm (8 in) R $ 55, mm (10 in) 6 m Non perforated R $ 48,40 $ 60,03 6 m Perforated R $ 57,87 6 m 250 mm (10 in) R $ 65,81 Legend : Plain end : No coupling C : Soil tight (snap bell) CGI : Water tight Qty* : Quantity per bundle. Identification : For identification purposes, Solflo Max R320 pipes include a blue line. 24

25 SOLFLO MAX (SMOOTH INTERIOR AND CORRUGATED EXTERIOR) - R320 1,01 Length Description Plain end Price / Meter C CGI 300 mm (12 in) 6 m 300 mm (12 in) $ 56,90 $ 62,22 $ 67,53 6 m Perforated $ 75,50 6 m Perforated & filtered (Routex III-IV) $ 88, mm (15 in) 6 m 375 mm (15 in) $ 92,21 $ 98,04 $ 104,44 6 m Perforated $ 129,84 6 m Perforated & filtered (Routex III-IV) $ 137, mm (18 in) 6 m 450 mm (18 in) $ 125,73 $ 129,50 $ 135,02 6 m Perforated $ 157,59 6 m Perforated & filtered (Routex III-IV) $ 175, mm (21 in) 6 m 525 mm (21 in) $ 156,40 $ 175,66 $ 185,14 6 m Perforated $ 164,62 $ 214,95 6 m Perforated & filtered (Routex III-IV) $ 203,24 $ 233, mm (24 in) 6 m 600 mm (24 in) $ 210,17 $ 231,59 $ 246,97 6 m Perforated $ 281,49 6 m Perforated & filtered (Routex III-IV) $ 268,48 $ 303, mm (30 in) 6 m 750 mm (30 in) $ 304,33 $ 331,96 $ 348,50 6 m Perforated $ 319,46 $ 429,12 6 m Perforated & filtered (Routex III-IV) $ 364,47 $ 455, mm (36 in) 6 m 900 mm (36 in) $ 469,88 $ 507,00 $ 529,28 6 m Perforated $ 484,68 $ 646,36 6 m Perforated & filtered (Routex III-IV) $ 574,86 $ 675,55 Legend : Plain end : No coupling C : Soil tight (snap bell) CGI : Water tight Identification : For identification purposes, Solflo Max R320 pipes include a blue line. 25

26 SOLFLO MAX (SMOOTH INTERIOR AND CORRUGATED EXTERIOR) 1,02 Price / Meter Length Description kpa Plain end CG mm (42 in) 3.30 m Non perforated R $ 594, m Perforated R $ 770, m Perforated & filtered (Routex III-IV) R $ 847, mm (48 in) 6 m Non perforated R $ 585, m Non perforated R $ 620, m Perforated R $ 806, m Perforated & filtered (Routex III-IV) R $ 886, mm (60 in)* 6 m Non perforated R $ 1,692,85 6 m Perforated R $ 2,256,13 6 m Perforated & filtered (Routex III-IV) R $ 2,418,36 Legend : Plain end : No coupling CG : Water tight Identification : For identification purposes, Solflo Max pipes of mm (42 po) and mm (48 po) include a white line. Bells for Solflo Max pipes from mm (42 in) to mm (60 in) are CG type (in-line bell with gasketed spigot). * Solflo Max pipes of mm (60 in) are available in St-Louis-de-Blandford, Quebec only. 26

27 x SOLFLO AND SOLFLO MAX COUPLINGS AND ACCESSORIES 9,00 End cap 100 mm (4 in) 2B100CV $8,23 Split coupling 2M900F 300 mm (12 in) 2M300F $ 28, mm (15 in) 2M375F $ 39, mm (18 in) 2M450F $ 49, mm (21 in) 2M525F $ 101, mm (24 in) 2M600F $ 103, mm (30 in) 2M750F $ 165, mm (36 in) 2M900F $ 185, mm (48 in) 2M1200F $ 472,43 Clamp coupling mm (42 in) 2M1050ROLLC $ 438, mm (48 in) 2M1200ROLLC $ 446,73 2M1200ROLLC 27

28 SOLFLO AND SOLFLO MAX COUPLINGS AND ACCESSORIES 41,00 Repair coupling 33MR mm (10 in) 33MR10 $ 199, mm (12 in) 33MR12 $ 246, mm (15 in) 33MR15 $ 312, mm (18 in) 33MR18 $ 342, mm (21 in) 33MR21 $ 462, mm (24 in) 33MR24 $ 612, mm (30 in) 33MR30 $ 766, mm (36 in) 33MR36 $ 919,28 2 gaskets included per repair coupling. Installation step #1. Installation step #2. Mar Mac flexible coupling Mar Mac clamping tool MM mm (12 in) MM $ 143, mm (15 in) MM $ 151, mm (18 in) MM $ 202, mm (24 in) MM $ 252, mm (30 in) MM $ 317, mm (36 in) MM $ 371, mm (42 in) MM $ 413, mm (48 in) MM $ 457,61 MMTLTNS $ 566,50 Mar Mac clampling tools are available for purchase at the prices indicated above. They are also available for rental. In this case, 80% of the purchase price will be credited if returned in the same condition as received. 28

29 SOLFLO AND SOLFLO MAX COUPLINGS AND ACCESSORIES 42,60 Double bell coupling C GI 100 mm (4 in) 3MCC004 $6,80 $ 17, mm (6 in) 3MCC006 $ 14,62 $ 35, mm (8 in) 3MCC008 $ 20,54 $ 50, mm (10 in) 3MCC010 $ 35,30 $ 82, mm (12 in) 3MCC012 $ 38,29 $ 93, mm (15 in) 3MCC015 $ 151,67 $ 246, mm (18 in) 3MCC018 $ 189,88 $ 289, mm (21 in) 3MCC021 $ 241,07 $ 367, mm (24 in) 3MCC024 $ 395,95 $ 581, mm (30 in) 3MCC030 $ 556,57 $ 731, mm (36 in) 3MCC036 $ 734,13 $ 962,54 Legend : C : Soil tight (snap bell) GI : Water tight 3MCC004C 3MCC004GI 29

30 SOLFLO AND SOLFLO MAX COUPLINGS AND ACCESSORIES 43,00 End cap C CG 100 mm (4 in) 2B100 $ 8.23 $ 10, mm (6 in) 2B150 $ 14,62 $ 17, mm (8 in) 2B200 $ 23,45 $ 32, mm (10 in) 2B250 $ 35,30 $ 47, mm (12 in) 2B300 $ 37,00 $ 51, mm (15 in) 2B375 $ 42,21 $ 74, mm (18 in) 2B450 $ 57,75 $ 94, mm (21 in) 2B525 $ 136,51 $ 142, mm (24 in) 2B600 $ 167,83 $ 191, mm (30 in) 2B750 $ 265,69 $ 345, mm (36 in) 2B900 $ 326,78 $ 476, mm (42 in) 2B1050 $ 1,663, mm (48 in) 2B1200 $ 1,936,41 Legend : C : Soil tight (snap bell) CG : Water tight 2B900C 2B900CG Products also available in 1050 mm (42 in) and 1200 mm (48 in) : 2B1050 2B1050CG 2B1050PLA 2B1050COL 30

31 SOLFLO AND SOLFLO MAX COUPLINGS AND ACCESSORIES 44, degree elbow Plain end C CGI 100 mm (4 in) 33C2204 $ 12,51 $ 25,62 $ 34, mm (6 in) 33C2206 $ 16,90 $ 41,40 $ 73, mm (8 in) 33C2208 $ 28,68 $ 64,65 $ 129, mm (10 in) 33C2210 $ 51,18 $ 110,28 $ 189, mm (12 in) 33C2212 $ 118,09 $ 135,62 $ 260, mm (15 in) 33C2215 $ 159,53 $ 273,47 $ 369, mm (18 in) 33C2218 $ 254,16 $ 378,09 $ 477, mm (21 in) 33C2221 $ 287,23 $ 414,17 $ 597, mm (24 in) 33C2224 $ 327,23 $ 880,28 $ 1,118, mm (30 in) 33C2230 $ 533,22 $ 1,275,59 $ 1,500, mm (36 in) 33C2236 $ 732,98 $ 1,534,49 $ 1,840, mm (42 in) 33C2242 $ 2,330,06 $ 4,115, mm (48 in) 33C2248 $ 2,490,92 $ 4,447,91 33C C2212C 33C2212CGI Legend : Plain end : No coupling C : Soil tight (snap bell) CGI : Water tight Bells for Solflo Max accessories from mm (42 in) and mm (48 in) are CG type (in-line bell with gasketed spigot). 31

32 SOLFLO AND SOLFLO MAX COUPLINGS AND ACCESSORIES 45,00 45 degree elbow Plain end C CGI 100 mm (4 in) 33C4504 $ 18,20 $ 40,62 $ 47, mm (6 in) 33C4506 $ 43,79 $ 62,79 $ 92, mm (8 in) 33C4508 $ 59,63 $ 72,80 $ 107, mm (10 in) 33C4510 $ 71,81 $ 120,59 $ 202, mm (12 in) 33C4512 $ 118,09 $ 158,97 $ 239, mm (15 in) 33C4515 $ 159,53 $ 286,40 $ 382, mm (18 in) 33C4518 $ 254,16 $ 386,83 $ 486, mm (21 in) 33C4521 $ 296,61 $ 536,36 $ 622, mm (24 in) 33C4524 $ 371,70 $ 924,52 $ 1,162, mm (30 in) 33C4530 $ 602,06 $ 1,344,43 $ 1,569, mm (36 in) 33C4536 $ 840,85 $ 1,642,38 $ 1,948, mm (42 in) 33C4542 $ 3,153,16 $ 4,931, mm (48 in) 33C4548 $ 3,313,98 $ 5,324,72 33C C4512C 33C4512CGI Legend : Plain end : No coupling C : Soil tight (snap bell) CGI : Water tight Bells for Solflo Max accessories from mm (42 in) and mm (48 in) are CG type (in-line bell with gasketed spigot). 32

33 SOLFLO AND SOLFLO MAX COUPLINGS AND ACCESSORIES 46,00 90 degree elbow Plain end C CGI 100 mm (4 in) 33C9004 $ 24,86 $ 49,87 $ 55, mm (6 in) 33C9006 $ 31,02 $ 70,68 $ 87, mm (8 in) 33C9008 $ 62,22 $ 88,18 $ 145, mm (10 in) 33C9010 $ 93,81 $ 143,19 $ 228, mm (12 in) 33C9012 $ 118,09 $ 171,29 $ 278, mm (15 in) 33C9015 $ 159,53 $ 318,76 $ 414, mm (18 in) 33C9018 $ 254,16 $ 439,25 $ 538, mm (21 in) 33C9021 $ 283,05 $ 587,62 $ 674, mm (24 in) 33C9024 $ 460,44 $ 1,013,48 $ 1,251, mm (30 in) 33C9030 $ 774,15 $ 1,516,52 $ 1,741, mm (36 in) 33C9036 $ 1,165,04 $ 1,966,04 $ 2,271, mm (42 in) 33C9042 $ 2,560,65 $ 4,543, mm (48 in) 33C9048 $ 2,877,28 $ 5,070,33 33C C9012C 33C9012CGI Legend : Plain end : No coupling C : Soil tight (snap bell) CGI : Water tight Bells for Solflo Max accessories from mm (42 in) and mm (48 in) are CG type (in-line bell with gasketed spigot). 33

34 SOLFLO AND SOLFLO MAX COUPLINGS AND ACCESSORIES 47,00 90 degree elbow - 3 sections Plain end C CGI 100 mm (4 in) 33SC9004 $ 34,65 $ 53,25 $ 77, mm (6 in) 33SC9006 $ 41,33 $ 80,76 $ 118, mm (8 in) 33SC9008 $ 70,77 $ 105,38 $ 162, mm (10 in) 33SC9010 $ 113,52 $ 164,94 $ 254, mm (12 in) 33SC9012 $ 140,49 $ 207,87 $ 295, mm (15 in) 33SC9015 $ 240,22 $ 258,14 $ 440, mm (18 in) 33SC9018 $ 376,37 $ 476,93 $ 576, mm (21 in) 33SC9021 $ 461,08 $ 652,08 $ 738, mm (24 in) 33SC9024 $ 568,75 $ 1,121,56 $ 1,359, mm (30 in) 33SC9030 $ 903,09 $ 1,645,46 $ 1,870, mm (36 in) 33SC9036 $ 1,315,46 $ 2,123,35 $ 2,429, mm (42 in) 33SC9042 $ 3,336,13 $ 5,460, mm (48 in) 33SC9048 $ 3,607,96 $ 5,802,72 33SC SC9012C 33SC9012CGI Legend : Plain end : No coupling C : Soil tight (snap bell) CGI : Water tight Bells for Solflo Max accessories from mm (42 in) and mm (48 in) are CG type (in-line bell with gasketed spigot). 34

35 SOLFLO AND SOLFLO MAX COUPLINGS AND ACCESSORIES 48,00 Cross Plain end C CGI CGPF 100 mm (4 in) 33X0404 $ 100,37 $ 103,99 $ 128,08 $ 135, mm (6 in) 33X0606 $ 122,77 $ 137,34 $ 195,78 $ 206, mm (8 in) 33X0808 $ 149,37 $ 186,40 $ 294,69 $ 310, mm (10 in) 33X1010 $ 187,57 $ 272,66 $ 421,60 $ 443, mm (12 in) 33X1212 $ 333,02 $ 415,71 $ 574, mm (15 in) 33X1515 $ 570,31 $ 688,98 $ 880, mm (18 in) 33X1818 $ 856,01 $ 953,82 $ 1,152, mm (21 in) 33X2121 $ 990,95 $ 1,278,56 $ 1,451, mm (24 in) 33X2424 $ 1,093,04 $ 2,198,65 $ 2,674, mm (30 in) 33X3030 $ 1,806,17 $ 3,290,92 $ 3,741, mm (36 in) 33X3636 $ 2,630,43 $ 4,463,01 $ 4,858, mm (42 in) 33X4242 $ 5,383,55 $ 8,922, mm (48 in) 33X4848 $ 5,711,57 $ 9,574,91 33X X1212C 33X1212CGI 33X0606CGPF Legend : Plain end : No coupling C : Soil tight (snap bell) CGI : Water tight CGPF : Water tight PVC female Bells for Solflo Max accessories from mm (42 in) and mm (48 in) are CG type (in-line bell with gasketed spigot). 35

36 SOLFLO AND SOLFLO MAX COUPLINGS AND ACCESSORIES 49,00 Reducing cross Plain end C CGI CGPF 150 mm x 100 mm (6 in x 4 in) 33X0604 $ 115,78 $ 119,01 $ 174,77 $ 183, mm x 100 mm (8 in x 4 in) 33X0804 $ 123,05 $ 141,12 $ 214,10 $ 225, mm x 150 mm (8 in x 6 in) 33X0806 $ 161,06 $ 244,42 $ 257, mm x 150 mm (10 in x 6 in) 33X1006 $ 197,22 $ 300,92 $ 316, mm x 200 mm (10 in x 8 in) 33X1008 $ 224,04 $ 352,65 $ 371, mm x 150 mm (12 in x 6 in) 33X1206 $ 300,04 $ 417,08 $ 439, mm x 200 mm (12 in x 8 in) 33X1208 $ 331,57 $ 473,56 $ 498, mm x 250 mm (12 in x 10 in) 33X1210 $ 375,55 $ 537,81 $ 566, mm x 300 mm (15 in x 12 in) 33X1512 $ 542,78 $ 726, mm x 375 mm (18 in x 15 in) 33X1815 $ 288,97 $ 672,70 $ 867, mm x 200 mm (24 in x 8 in) 33X2408 $ 437,82 $ 1,102,89 $ 1,395, mm x 450 mm (24 in x 18 in) 33X2418 $ 598,03 $ 1,376,60 $ 1,713, mm x 525 mm (24 in x 21 in) 33X2421 $ 707,45 $ 1,618,28 $ 1,942, mm x 600 mm (30 in x 24 in) 33X3024 $ 1,171,85 $ 2,352,46 $ 2,815, mm x 600 mm (36 in x 24 in) 33X3624 $ 1,344,50 $ 2,705,92 $ 3,249, mm x 750 mm (36 in x 30 in) 33X3630 $ 1,614,17 $ 3,113,37 $ 3,644, mm x 750 mm (48 in x 30 in) 33X4830 $ 3,135,62 $ 6,034, mm x 900 mm (48 in x 36 in) 33X4836 $ 3,504,12 $ 6,377,97 $ 6,551,56 33X X1506C 33X1506CGI 33X1506CGPF Legend : Plain end : No coupling C : Soil tight (snap bell) CGI : Water tight CGPF : Water tight PVC female Bells for Solflo Max accessories from mm (42 in) and mm (48 in) are CG type (in-line bell with gasketed spigot). Contact our customer service department for pricing and lead time on non-listed items. 36

37 SOLFLO AND SOLFLO MAX COUPLINGS AND ACCESSORIES 50,00 Reducer Plain end C CGI 150 mm x 100 mm (6 in x 4 in) 33RED0604 $ 64,20 $ 74,23 $ 94, mm x 100 mm (8 in x 4 in) 33RED0804 $ 66,52 $ 84,09 $ 117, mm x 150 mm (8 in x 6 in) 33RED0806 $ 68,32 $ 91,70 $ 133, mm x 100 mm (10 in x 4 in) 33RED1004 $ 78,33 $ 102,34 $ 145, mm x 150 mm (10 in x 6 in) 33RED1006 $ 73,80 $ 109,96 $ 161, mm x 200 mm (10 in x 8 in) 33RED1008 $ 76,13 $ 119,81 $ 184, mm x 150 mm (12 in x 6 in) 33RED1206 $ 118,58 $ 171,58 $ 230, mm x 200 mm (12 in x 8 in) 33RED1208 $ 121,90 $ 181,42 $ 252, mm x 250 mm (12 in x 10 in) 33RED1210 $ 128,66 $ 210,82 $ 279, mm x 300 mm (15 in x 12 in) 33RED1512 $ 152,11 $ 298,41 $ 392, mm x 300 mm (18 in x 12 in) 33RED1812 $ 231,44 $ 386,40 $ 479, mm x 375 mm (18 in x 15 in) 33RED1815 $ 306,72 $ 395,73 $ 493, mm x 300 mm (24 in x 12 in) 33RED2412 $ 335,87 $ 676,92 $ 839, mm x 450 mm (24 in x 18 in) 33RED2418 $ 384,20 $ 790,07 $ 958, mm x 525 mm (30 in x 21 in) 33RED3021 $ 1,097,80 $ 1,253, mm x 600 mm (30 in x 24 in) 33RED3024 $ 684,12 $ 1,197,12 $ 1,428, mm x 600 mm (36 in x 24 in) 33RED3624 $ 760,64 $ 1,543,76 $ 1,815, mm x 750 mm (36 in x 30 in) 33RED3630 $ 1,768,44 $ 2,033, mm x 600 mm (42 in x 24 in) 33RED4224 $ 2,392, mm x 300 mm (48 in x 12 in) 33RED4812 $ 1,762, mm x 900 mm (48 in x 36 in) 33RED4836 $ 1,415,08 33RED RED1204C 33RED1204CGI Legend : Plain end : No coupling C : Soil tight (snap bell) CGI : Water tight Bells for Solflo Max accessories from mm (42 in) and mm (48 in) are CG type (in-line bell with gasketed spigot). Contact our customer service department for pricing and lead time on non-listed items. 37

38 SOLFLO AND SOLFLO MAX COUPLINGS AND ACCESSORIES 51,00 Tee Plain end C CGI CGPF 100 mm (4 in) 33T0404 $ 52,12 $ 76,55 $ 82,31 $ 86, mm (6 in) 33T0606 $ 68,00 $ 117,11 $ 136,51 $ 143, mm (8 in) 33T0808 $ 91,40 $ 129,47 $ 210,70 $ 221, mm (10 in) 33T1010 $ 120,08 $ 194,20 $ 316,19 $ 332, mm (12 in) 33T1212 $ 169,66 $ 294,59 $ 426, mm (15 in) 33T1515 $ 200,15 $ 490,99 $ 634, mm (18 in) 33T1818 $ 259,57 $ 668,95 $ 771, mm (21 in) 33T2121 $ 450,38 $ 907,21 $ 1,037, mm (24 in) 33T2424 $ 733,65 $ 1,562,96 $ 1,920, mm (30 in) 33T3030 $ 1,225,70 $ 2,339,24 $ 2,676, mm (36 in) 33T3636 $ 1,822,26 $ 3,035,12 $ 3,493, mm (48 in) 33T4848 $ 4,917,37 $ 7,675,79 33T T1212C 33T1212CGI 33T0606CGPF Legend : Plain end : No coupling C : Soil tight (snap bell) CGI : Water tight CGPF : Water tight PVC female Bells for Solflo Max accessories from mm (42 in) to mm (48 in) are CG type (in-line bell with gasketed spigot). 38

39 SOLFLO AND SOLFLO MAX COUPLINGS AND ACCESSORIES 52,00 Reducing tee Plain end C CGI CGPF 150 mm x 100 mm (6 in x 4 in) 33T0604 $ 52,12 $ 79,69 $ 118,38 $ 123, mm x 100 mm (8 in x 4 in) 33T0804 $ 60,64 $ 101,82 $ 165,41 $ 174, mm x 150 mm (8 in x 6 in) 33T0806 $ 71,83 $ 116,41 $ 195,49 $ 205, mm x 100 mm (10 in x 4 in) 33T1004 $ 77,10 $ 142,59 $ 233,42 $ 245, mm x 150 mm (10 in x 6 in) 33T1006 $ 83,88 $ 153,38 $ 252,79 $ 266, mm x 200 mm (10 in x 8 in) 33T1008 $ 108,99 $ 168,32 $ 280,17 $ 294, mm x 100 mm (12 in x 4 in) 33T1204 $ 103,48 $ 202,00 $ 315,22 $ 331, mm x 150 mm (12 in x 6 in) 33T1206 $ 109,58 $ 212,75 $ 334,57 $ 352, mm x 200 mm (12 in x 8 in) 33T1208 $ 123,05 $ 231,61 $ 365,91 $ 385, mm x 150 mm (15 in x 6 in) 33T1506 $ 139,86 $ 334,93 $ 445,27 $ 468, mm x 200 mm (15 in x 8 in) 33T1508 $ 165,48 $ 353,30 $ 476,10 $ 501, mm x 250 mm (15 in x 10 in) 33T1510 $ 190,10 $ 379,40 $ 505,67 $ 532, mm x 300 mm (15 in x 12 in) 33T1512 $ 235,49 $ 422,12 $ 545, mm x 150 mm (18 in x 6 in) 33T1806 $ 167,00 $ 432,98 $ 550,95 $ 566, mm x 200 mm (18 in x 8 in) 33T1808 $ 177,63 $ 437,59 $ 564,04 $ 593, mm x 250 mm (18 in x 10 in) 33T1810 $ 248,97 $ 466,00 $ 602,60 $ 634, mm x 300 mm (18 in x 12 in) 33T1812 $ 287,14 $ 510,97 $ 663, mm x 375 mm (18 in x 15 in) 33T1815 $ 298,42 $ 583,40 $ 675, mm x 300 mm (24 in x 12 in) 33T2412 $ 454,86 $ 996,56 $ 1,339, mm x 375 mm (24 in x 15 in) 33T2415 $ 493,85 $ 1,078,91 $ 1,382, mm x 450 mm (24 in x 18 in) 33T2418 $ 458,59 $ 1,134,00 $ 1,428, mm x 600 mm (30 in x 24 in) 33T3024 $ 958,89 $ 1,977,76 $ 2,192, mm x 600 mm (36 in x 24 in) 33T3624 $ 1,254,28 $ 2,339,22 $ 2,635, mm x 750 mm (36 in x 30 in) 33T3630 $ 1,416,23 $ 2,595,81 $ 2,859, mm (42 in) 33T4242 $ 3,079,49 $ 6,374, mm x 600 mm (48 in x 24 in) 33T4824 $ 2,617,13 $ 4,970, mm x 750 mm (48 in x 30 in) 33T4830 $ 2,808,88 $ 5,327, mm x 900 mm (48 in x 36 in) 33T4836 $ 3,139,94 $ 5,674,70 $ 5,735,80 33T T1506C 33T1506CGI 33T1506CGPF Legend : Plain end : No coupling C : Soil tight (snap bell) CGI : Water tight CGPF : Water tight PVC female Bells for Solflo Max accessories from mm (42 in) and mm (48 in) are CG type (in-line bell with gasketed spigot). Contact our customer service department for pricing and lead time on non-listed items. 39

40 SOLFLO AND SOLFLO MAX COUPLINGS AND ACCESSORIES 54,00 Wye Plain end C CGI CGPF 100 mm (4 in) 33Y0404 $ 59,64 $ 78,14 $ 87,75 $ 92, mm (6 in) 33Y0606 $ 74,15 $ 123,06 $ 168,44 $ 177, mm (8 in) 33Y0808 $ 101,85 $ 164,59 $ 245,81 $ 258, mm (10 in) 33Y1010 $ 157,56 $ 233,99 $ 345,69 $ 363, mm (12 in) 33Y1212 $ 237,30 $ 255,65 $ 416, mm (15 in) 33Y1515 $ 301,98 $ 532,95 $ 676, mm (18 in) 33Y1818 $ 377,65 $ 743,13 $ 896, mm (21 in) 33Y2121 $ 544,30 $ 1,035,70 $ 1,165, mm (24 in) 33Y2424 $ 955,78 $ 1,740,61 $ 2,097, mm (30 in) 33Y3030 $ 1,655,55 $ 2,700,63 $ 3,038, mm (36 in) 33Y3636 $ 2,524,34 $ 3,628,78 $ 4,087,42 33Y Y1212C 33Y1212CGI 33Y0606CGPF Legend : Plain end : No coupling C : Soil tight (snap bell) CGI : Water tight CGPF : Water tight PVC female Bells for Solflo Max accessories from mm (42 in) and mm (48 in) are CG type (in-line bell with gasketed spigot). 40

41 SOLFLO AND SOLFLO MAX COUPLINGS AND ACCESSORIES 54,00 Reducing wye Plain end C CGI CGPF 150 mm x 100 mm (6 in x 4 in) 33Y0604 $ 85,28 $ 113,55 $ 148,79 $ 180, mm x 100 mm (8 in x 4 in) 33Y0804 $ 105,11 $ 135,82 $ 195,99 $ 206, mm x 150 mm (8 in x 6 in) 33Y0806 $ 117,66 $ 147,93 $ 212,67 $ 223, mm x 100 mm (10 in x 4 in) 33Y1004 $ 99,76 $ 175,23 $ 255,71 $ 269, mm x 150 mm (10 in x 6 in) 33Y1006 $ 109,65 $ 188,73 $ 277,81 $ 292, mm x 200 mm (10 in x 8 in) 33Y1008 $ 132,49 $ 206,80 $ 309,15 $ 325, mm x 100 mm (12 in x 4 in) 33Y1204 $ 129,44 $ 226,46 $ 320,31 $ 344, mm x 150 mm (12 in x 6 in) 33Y1206 $ 142,70 $ 241,96 $ 344, mm x 200 mm (12 in x 8 in) 33Y1208 $ 156,97 $ 261,93 $ 376, mm x 150 mm (15 in x 6 in) 33Y1506 $ 183,81 $ 345,45 $ 455, mm x 200 mm (15 in x 8 in) 33Y1508 $ 197,95 $ 366,15 $ 488, mm x 300 mm (15 in x 12 in) 33Y1512 $ 250,77 $ 440,66 $ 536, mm x 150 mm (18 in x 6 in) 33Y1806 $ 218,23 $ 470,35 $ 576, mm x 200 mm (18 in x 8 in) 33Y1808 $ 260,90 $ 502,29 $ 604, mm x 300 mm (18 in x 12 in) 33Y1812 $ 383,44 $ 536,32 $ 661, mm x 375 mm (18 in x 15 in) 33Y1815 $ 410,06 $ 636,13 $ 783, mm x 300 mm (24 in x 12 in) 33Y2412 $ 531,24 $ 1,051,71 $ 1,333, mm x 450 mm (24 in x 18 in) 33Y2418 $ 807,52 $ 1,445, mm x 600 mm (30 in x 24 in) 33Y3024 $ 1,217,89 $ 1,933,98 $ 2,272,31 33Y Y1506C 33Y1506CGI 33Y1506CGPF Legend : Plain end : No coupling C : Soil tight (snap bell) CGI : Water tight CGPF : Water tight PVC female Bells for Solflo Max accessories from mm (42 in) and mm (48 in) are CG type (in-line bell with gasketed spigot). Contact our customer service department for pricing and lead time on non-listed items. 41

42 SOLFLO AND SOLFLO MAX COUPLINGS AND ACCESSORIES 55,00 Manhole adapter for PVC DR35 entry 33ADR12GIP 100 mm (4 in) 33ADR04 $ 18, mm (6 in) 33ADR06 $ 26, mm (8 in) 33ADR08 $ 39, mm (10 in) 33ADR10 $ 77, mm (12 in) 33ADR12GIP $ 250, mm (15 in) 33ADR15GIP $ 281, mm (18 in) 33ADR18GIP $ 318, mm (21 in) 33ADR21GIP $ 388, mm (24 in) 33ADR24GIP $ 589, mm (30 in) 33ADR30GIP $ 892, mm (36 in) 33ADR36GIP $ 1,048,36 Manhole adapter for concrete entry 525 mm (21 in) 33ADR21GIS $ 613, mm (24 in) 33ADR24GIS $ 738, mm (30 in) 33ADR30GIS $ 920, mm (36 in) 33ADR36GIS $ 1,029,29 33ADR36GIS To purchase custom-made adapters, please download our order form at 42

43 SOLFLO AND SOLFLO MAX COUPLINGS AND ACCESSORIES 57,00 Manhole adaptor - Soleno male format (concrete) mm (42 in) 33ADR42SM $ 2,709, mm (48 in) 33ADR48SM $ 3,630,53 33ADR42SM Manhole adaptor - Soleno female format (concrete) mm (42 in) 33ADR42SF $ 2,709, mm (48 in) 33ADR48SF $ 3,194,87 33ADR42SF Manhole adaptor - Male outlet with o-ring gasket mm (42 in) 33ADR42CF $ 2,324, mm (48 in) 33ADR48CF $ 2,466,07 33ADR42CF To purchase custom-made adapters, please download our order form at 43

44 SOLFLO AND SOLFLO MAX COUPLINGS AND ACCESSORIES 59,50 Universal sol-tee 100 mm (4 in) 33SL $ 132, mm (6 in) 33SL $ 168, mm (8 in) 33SL $ 205,22 33SL Universal sol-tee saw bit Gasket MPG004 SM mm (4 in) SM0004 $ 525, mm (6 in) SM0006 $ 525, mm (8 in) SM0008 $ 525, mm (10 in) SM0010 $ 525,00 Sol-tee saw bits are available for purchase at the prices indicated above. They are also available for rental. In this case, 80% of the purchase price will be credited if returned in the same condition as received. 100 mm (4 in) MPGO04 $1, mm (6 in) MPGO06 $5, mm (8 in) MPGO08 $9, mm (10 in) MPGO10 $ 14, mm (12 in) MPGO12 $ 23, mm (15 in) MPGO15 $ 35, mm (18 in) MPGO18 $ 48, mm (21 in) MPGO21W $ 97, mm (24 in) MPGO24WS $ 98, mm (30 in) MPGO30WS $ 109, mm (36 in) MPGO36WS $ 133, mm (42 in) MPGO42WSP $ 136, mm (48 in) MPGO48WS $ 140,78 44

45 BEVELLED PIPE (DRIVEWAY CULVERT) 64,00 Pipe Length kpa Plain end C 300 mm (12 in) 6 m R210 BISE $ 240,83 $ 253, mm (15 in) 6 m R210 BISE $ 406,72 $ 424, mm (18 in) 6 m R210 BISE $ 513,09 $ 566, mm (21 in) 6 m R210 BISE $ 743,42 $ 814, mm (24 in) 6 m R210 BISE $ 818,09 $ 993, mm (30 in) 6 m R210 BISE $ 1,322,66 $ 1,487, mm (36 in) 6 m R210 BISE $ 2,101,77 $ 2,343,64 - Price of bevelled pipes does not include price of the bevelled cut (see below). Legend : Plain end : No coupling C : Soil tight (snap bell) BISE C Bevelled cut Price / Cut 1:1(45 ) 1:2(63.4 ) 2:1(26.6 ) 3:1(18.5 ) 300 mm (12 in) BISE-12- $ 103,08 $ 103,08 $ 103,08 $ 103, mm (15 in) BISE-15- $ 128,90 $ 128,90 $ 128,90 $ 128, mm (18 in) BISE-18- $ 154,65 $ 154,65 $ 154,65 $ 154, mm (21 in) BISE-21- $ 193,32 $ 193,32 $ 193,32 $ 193, mm (24 in) BISE-24- $ 231,97 $ 231,97 $ 231,97 $ 231, mm (30 in) BISE-30- $ 257,74 $ 257,74 $ 257,74 $ 257, mm (36 in) BISE-36- $ 309,31 $ 309,31 $ 309,31 $ 309,31 - Our bevelled cuts comply with MTQ regulations. - The standard MTQ cutting angle is 2:1. 45

46 BEVELLED PIPE (ROADWAY USE) 65,00 Pipe 300 mm (12 in) 300 mm (12 in) 375 mm (15 in) 375 mm (15 in) 450 mm (18 in) 450 mm (18 in) 525 mm (21 in) 525 mm (21 in) 600 mm (24 in) 600 mm (24 in) 750 mm (30 in) 750 mm (30 in) 900 mm (36 in) 900 mm (36 in) mm (42 in) mm (48 in) mm (60 in) Length 4 m 6 m 4 m 6 m 4 m 6 m 4 m 6 m 4 m 6 m 4 m 6 m 4 m 6 m 3.30 m 3.30 m 6 m kpa R320 R320 R320 R320 R320 R320 R320 R320 R320 R320 R320 R320 R320 R320 R145 R135 R105 BISE BISE BISE BISE BISE BISE BISE BISE BISE BISE BISE BISE BISE BISE BISE BISE BISE Plain end C CGI $ 292,09 $ 326,57 $ 373,32 $ 429,70 $ 553,31 $ 588,23 $ 549,48 $ 734,53 $ 776,93 $ 765,51 $ 938,36 $ 1,053,91 $ 1,057,54 $ 1,261,06 $ 1,389,47 $ 1,532,60 $ 1,826,00 $ 1,991,78 $ 2,219,42 $ 2,819,26 $ 3,042,02 $ 1,961,68 $ 2,046,83 $ 10,157,09 - Price of bevelled pipes does not include price of the bevelled cut (see below). Legend : Plain end : No coupling C : Soil tight (snap bell) CGI : Water tight BISE CGI Bevelled cut Price / Cut 1:1(45 ) 1:2(63.4 ) 2:1(26.6 ) 3:1(18.5 ) 300 mm (12 in) BISE-12- $ 103,08 $ 103,08 $ 103,08 $ 103, mm (15 in) BISE-15- $ 128,90 $ 128,90 $ 128,90 $ 128, mm (18 in) BISE-18- $ 154,65 $ 154,65 $ 154,65 $ 154, mm (21 in) BISE-21- $ 193,32 $ 193,32 $ 193,32 $ 193, mm (24 in) BISE-24- $ 231,97 $ 231,97 $ 231,97 $ 231, mm (30 in) BISE-30- $ 257,74 $ 257,74 $ 257,74 $ 257, mm (36 in) BISE-36- $ 309,31 $ 309,31 $ 309,31 $ 309, mm (42 in) BISE-42- $ 347,98 $ 347,98 $ 347,98 $ 347, mm (48 in) BISE-48- $ 386,64 $ 386,64 $ 386,64 $ 386, mm (60 in) BISE-60- $ 438,20 $ 438,20 $ 438,20 $ 438,20 - Our bevelled cuts comply with MTQ regulations. - The standard MTQ cutting angle is 2:1. 46

47 BEVELLED PIPE 66,00 Bevelled end 300 mm (12 in) 375 mm (15 in) 450 mm (18 in) 525 mm (21 in) 600 mm (24 in) 750 mm (30 in) 900 mm (36 in) Length 1.3 m 1.4 m 1.5 m 1.5 m 1.6 m 1.7 m 1.9 m kpa R320 R320 R320 R320 R320 R320 R320 33END12 33END15 33END18 33END21 33END24 33END30 33END36 Plain end C CGI $ 219,77 $ 231,32 $ 262,87 $ 303,10 $ 319,04 $ 350,59 $ 370,83 $ 390,34 $ 419,74 $ 453,99 $ 488,18 $ 524,91 $ 551,43 $ 593,28 $ 644,85 $ 933,67 $ 1,004,65 $ 1,104,02 $ 1,241,86 $ 1,336,63 $ 1,437,24 - Cost of bevelled cut is included in the price. - Bevelled ends come with a polyethylene band covering and are made of Solflo Max R320 pipe. - Cutting angle is 2:1(26.6 ) - MTQ standards. - 3:1(18.5 ) angle cut available upon request. Legend : Plain end : No coupling C : Soil tight (snap bell) CGI : Water tight 33END18C 47

48 CHANNEL PIPE 67,00 Pipe Length kpa 300 mm (12 in) 6 m R210 DALOT $ 140, mm (12 in) 6 m R320 DALOT C $ 212, mm (15 in) 6 m R320 DALOT C $ 326, mm (18 in) 6 m R320 DALOT C $ 427, mm (21 in) 6 m R320 DALOT C $ 575, mm (24 in) 6 m R320 DALOT C $ 752, mm (30 in) 6 m R320 DALOT C $ 1,060, mm (36 in) 6 m R320 DALOT C $ 1,598, mm (42 in) 3.30 m R145 DALOT CG $ 1,961, mm (48 in) 3.30 m R135 DALOT CG $ 2,046, mm (60 in) 6 m R105 DALOT CG $ 5,297,10 DALOT C - Our channel pipes are sold by the pair only. - Cost of channel pipe cut is included in price. - Anchors sold separately (see below). Anchor 300 mm (12 in) 6ADD012* $ 113, mm (12 in) to 525 mm (21 in) 6ADS $ 49, mm (24 in) to 900 mm (36 in) 6ADS $ 54, mm (42 in) to 1200 mm (48 in) 6ADS $ 61,38 A pair of anchors is required at 1,5 meter (59 in) intervals among length of pipe. * Anchor for DALOT only. 48

49 BEAVER BARRIER 69,00 Barrier 300 mm (12 in) 33HC12 $ 1,026, mm (18 in) 33HC18 $ 1,098,16 33HC18 Anchor * Important de commander 4 ancrages du diamètre désiré. 300 mm (12 in) MPANCR12 $ 64, mm (18 in) MPANCR18 $ 73,11 A complete kit consists of one barrier, four anchors and one 9 m (29.54 ft) Solflo Max R210 pipe. All components are sold separately. Pour le tuyau, le client va payer le prix sur la liste foresterie. 49

50 ENVIRO-SPAN 71,00 Straight module Description mm (7 ft) x mm (3.5 ft) ENSP C $ 2,220,05 Angle module Description 23 degree angle ENSP C $ 1,999,75 Connector Description mm (7 ft) ENSP C $ 249,83 See our brochure at 50

51 FILCOTEN ROBUST 74,00 Channel Class Dimension(s) SOL A 100 mm x 1 m (4 in x 39.4 in) FIL-U $ 60,77 Sold in pallets of 24, 36 or 48 units only. Galvanized steel grate included. Side connection well Class Dimension(s) SOL A 100 mm x 0.5 m (4 in x 19.7 in) FIL $ 214,24 One adapter (1ADRC04) required per side connection well to connect to a 100 mm (4 in) HDPE pipe (sold separately). No adaptor required to connect to PVC. Galvanized steel grate and well bucket included. Replacement well bucket SOL FIL $ 28,84 Vertical channel outlet Nominal diameter Connects to 100 mm (4 in) PVC or HDPE 100 mm (4 in) FIL $ 44,29 Channel end plate (without outlet) Width SOL 100 mm (4 in) FIL $ 15,45 Channel end plate (with outlet) Nominal diameter Connects to 100 mm (4 in) PVC or HDPE (1) Width 100 mm (4 in) FIL $ 44,29 (1) One 1ADRC04 required (sold separately). See our brochure at Our Filcoten Robust line of products is available out of Soleno Textiles in Laval, Quebec only. 51

52 SOL SOL SOL SOL SOL FILCOTEN INFRA WITH 4 mm GALVANIZED STEEL ANGLES 81,00 Channel 100 mm 150 mm 200 mm 300 mm LN Depth Class (4 in) (6 in) (8 in) (12 in) 1 m 142 mm (5.6 in) C FIL $ 126,69 1 m 195 mm (7.7 in) C FIL $ 139,05 1 m 245 mm (9.7 in) C FIL $ 160,06 1 m 210 mm (8.26 in) E FIL $ 169,95 1 m 265 mm (10.4 in) C FIL $ 213,21 Channel grates sold separately. SOL SOL SOL SOL SOL SOL SOL SOL SOL SOL SOL FIL Channel grate 100 mm 150 mm 200 mm 300 mm LN Material/Pattern ADA Class (4 in) (6 in) (8 in) (12 in) 1 m Galvanized/Slotted A FIL $ m Galvanized/Mesh B FIL $ m Iron/Bar X C FIL * $ m Composite/Perf. X C FIL * $ m Galvanized/Perf. X C FIL $ m Galvanized/Asymetric slot C FIL $ m Iron/Bar D FIL * $ m Galvanized/Mesh B FIL $ 145, m Iron/Bar X D FIL * $ 111,24 1 m Galvanized/Mesh B FIL $ 176, m Iron/Bar X D FIL * $ 129,16 * Two grates required per channel. Galvanized/ Slotted Galvanized/ Mesh Iron/ Bar Galvanized/ Perf. ADA Iron/ Bar ADA ADA : "Americans with Disabilities Act" compliant ( See our brochure at Composite/ Perf. ADA Contact our customer service department for inquiries about linear drainage products not shown in this document. Our Filcoten Infra line of products is available out of Soleno Textiles in Laval, Quebec only. 52

53 SOL SOL SOL FILCOTEN INFRA WITH 4 mm GALVANIZED STEEL ANGLES 82,00 Side connection well 100 mm 150 mm 200 mm 300 mm LN Height Class (4 in) (6 in) (8 in) (12 in) 0.5 m 600 mm (23.6 in) C FIL $ 412, m 690 mm (27.2 in) E FIL $ 550, m 790 mm (31.1 in) C FIL $ 674,24 See the "Side connection adaptor" section on the following page for connection options. Side connection well grates sold separately. Well bucket included. FIL SOL SOL SOL1 SOL SOL1 SOL1 SOL1 SOL SOL1 SOL SOL1 Side connection well grate 100 mm 150 mm 200 mm 300 mm LN Material/Pattern ADA Class (4 in) (6 in) (8 in) (12 in) 0.5 m Galvanized/Slotted A FIL $ m Galvanized/Mesh B FIL $ m Galvanized/Asymetric slot C FIL $ m Galvanized/Perf. X C FIL $ m Iron/Bar X C FIL $ m Iron/Bar D FIL $ m Composite/Perf. X C FIL $ m Galvanized/Mesh B FIL $ 116, m Iron/Bar X D FIL $ 111, m Galvanized/Mesh B FIL $ 141, m Iron/Bar X D FIL $ 129,16 One grate required for all side connection well models. Galvanized/ Slotted Galvanized/ Mesh Iron/ Bar Galvanized/ Perf. ADA Iron/ Bar ADA Composite/ Perf. ADA ADA : "Americans with Disabilities Act" compliant ( 53

54 FILCOTEN INFRA WITH 4 mm GALVANIZED STEEL ANGLES 84,00 Side connection adaptor 100 mm 150 mm 200 mm 300 mm Nominal diameter Connects to (4 in) (6 in) (8 in) (12 in) 200 mm (8 in) PVC or HDPE (1) FIL (2) (3) $ 58,10 FIL (1) (2) (3) Required to connect a 200 mm (8 in) PVC or HDPE pipe to a 200 mm (8 in) to a side connection well. One 1ADRC04 is required to connect a 100 mm (4 in)¼ HDPE pipe to a 100 mm (4 in) side connection well (sold separately). No adaptor required to connect to a 100 mm (4 in) PVC pipe. One 33ADR06 is required to connect a 150 mm (6 in)¼ HDPE pipe to a 150 mm (6 in) side connection well (sold separately). No adaptor required to connect to a 150 mm (6 in) PVC pipe. Channel end plate (without outlet) FIL mm 150 mm 200 mm 300 mm (4 in) (6 in) (8 in) (12 in) FIL $ 35,23 FIL $ 44,50 FIL $ 57,47 Channel end plate (with outlet) 100 mm 150 mm 200 mm 300 mm Nominal diameter Connects to (4 in) (6 in) (8 in) (12 in) 100 mm (4 in) PVC or HDPE (1) FIL $ 88, mm (6 in) PVC* or HDPE (2) FIL $ 105, mm (8 in) PVC* or HDPE (3) FIL $ 117,73 FIL (1) (2) (3) One 1ADRC04 required (sold separately). One 33ADR06 required (sold separately). One 33ADR08 required (sold separately). * Must be connected to the female end of 150 mm (6 in) and 200 mm (8 in) PVC pipe. 54

55 FILCOTEN INFRA WITH 4 mm GALVANIZED STEEL ANGLES 87,00 Vertical channel outlet 100 mm 150 mm 200 mm 300 mm Nominal diameter Connects to (4 in) (6 in) (8 in) (12 in) 100 mm (4 in) PVC or HDPE (1) FIL $ 54, mm (6 in) PVC* or HDPE (2) FIL $ 60, mm (8 in) PVC* or HDPE (3) FIL $ 66,74 FIL Vandal-proof lock FIL (1) (2) (3) One 1ADRC04 required (sold separately). One 33ADR06 required (sold separately). One 33ADR08 required (sold separately). * Must be connected to the female end of 150 mm (6 in) and 200 mm (8 in) PVC pipe. 100 mm 150 mm 200 mm 300 mm (4 in) (6 in) (8 in) (12 in) FIL $ 27,81 FIL $ 37,39 FIL $ 44,29 Compatible with galvanized mesh, galvanized/perforated and iron/bar grates (optional). Up to two units per grate but only one required. 55

56 SOL SOL SOL SOL SOL FILCOTEN INFRA WITH 5 mm CAST IRON ANGLES 95,00 Channel 100 mm 150 mm 200 mm 300 mm LN Depth Class (4 in) (6 in) (8 in) (12 in) 1 m 195 mm (7.7 in) F FIL $ 191,58 1 m 245 mm (9.7 in) F FIL $ 197,76 1 m 210 mm (8.26 in) F FIL $ 222,48 1 m 265 mm (10.4 in) F FIL $ 265,74 1 m 360 mm (14.2 in) F FIL $ 361,53 Channel grates sold separately. FIL SOL1 SOL2 Channel grate LN Material/Pattern ADA 1 m Galvanized/Perf. X 0.5 m Composite/Perf. X 0.5 m Iron/Bar 0.5 m Iron/Bar 0.5 m Iron/Bar 0.5 m Iron/Bar SOL (1) SOL (1) SOL (1) SOL (1) Class C C E E E E 100 mm 150 mm 200 mm 300 mm (4 in) (6 in) (8 in) (12 in) FIL $ 145,23 FIL * $ 77,25 FIL * $ 64,89 FIL * $ 111,24 FIL * $ 147,81 FIL * $ 253,38 (1) Bolt on cast iron grate. * Two grates required per channel. Galvanized/ Perf. ADA Composite/ Perf. ADA Iron/ Bar ADA : "Americans with Disabilities Act" compliant ( See our brochure at Contact our customer service department for inquiries about linear drainage products not shown in this document. Our Filcoten Infra line of products is available out of Soleno Textiles in Laval, Quebec only. 56

57 SOL1 SOL SOL1 SOL1 FILCOTEN INFRA WITH 5 mm CAST IRON ANGLES 96,00 Side connection well 100 mm 150 mm 200 mm 300 mm LN Height Class (4 in) (6 in) (8 in) (12 in) 0.5 m 600 mm (23.6 in) E FIL $ 438, m 690 mm (27.2 in) E FIL $ 594, m 790 mm (31.1 in) E FIL $ 699, m 950 mm (37.4 in) E FIL * $ 1,287,91 FIL See the "Side connection adaptor" section on the following page for connection options. Grates sold separately. Well bucket included. * Two pieces. * The nominal diameter of the outlet is 200 mm (8 in). Side connection well grate LN Material/Pattern ADA SOL1 0.5 m Galvanized/Perf. X SOL3 0.5 m Composite/Perf. X SOL1 (1) 0.5 m Iron/Bar SOL1 (1) 0.5 m Iron/Bar SOL1 (1) 0.5 m Iron/Bar SOL1 (1) 0.5 m Iron/Bar Class C C E E E E 100 mm 150 mm 200 mm 300 mm (4 in) (6 in) (8 in) (12 in) FIL $ 116,18 FIL $ 77,25 FIL $ 64,89 FIL $ 111,24 FIL $ 147,81 FIL $ 253,38 (1) Bolt on cast iron grate. Galvanized/ Perf. ADA Composite/ Perf. ADA Iron/ Bar ADA : "Americans with Disabilities Act" compliant ( 57

58 FILCOTEN INFRA WITH 5 mm CAST IRON ANGLES 98,00 Side connection adaptor 100 mm 150 mm 200 mm 300 mm Nominal diameter Connects to (4 in) (6 in) (8 in) (12 in) 200 mm (8 in) PVC or HDPE (1) FIL (2) (3) $ 58,10 $ 58,10 FIL (1) (2) Required to connect a 200 mm (8 in) PVC or HDPE pipe to a 200 mm (8 in) and a 300 mm (12 in)¼to a side connection well. One 1ADRC04 is required to connect a 100 mm (4 in)¼ HDPE pipe to a 100 mm (4 in) side connection well (sold separately). No adaptor required to connect to a 100 mm (4 in) PVC pipe. (3) One 33ADR06 is required to connect a 150 mm (6 in)¼ HDPE pipe to a 150 mm (6 in) side connection well (sold separately). No adaptor required to connect to a 150 mm (6 in) PVC pipe. Channel end plate (without outlet) FIL mm 150 mm 200 mm 300 mm (4 in) (6 in) (8 in) (12 in) FIL $ 35,23 FIL $ 44,50 FIL $ 57,47 FIL * $ 71,07 FIL ** $ 77,25 * Compatible only with channel FIL ** Compatible only with side connection well FIL Channel end plate (with outlet) 100 mm 150 mm 200 mm 300 mm Nominal diameter Connects to (4 in) (6 in) (8 in) (12 in) 100 mm (4 in) PVC or HDPE (1) FIL $ 88, mm (6 in) PVC* or HDPE (2) FIL $ 105, mm (8 in) PVC* or HDPE (3) FIL $ 117, mm (8 in) PVC* or HDPE (3) FIL $ 120,51 (1) One 1ADRC04 required (sold separately). (2) One 33ADR06 required (sold separately). (3) One 33ADR08 required (sold separately). FIL * Must be connected to the female end of 150 mm (6 in) and 200 mm (8 in) PVC pipe. 58

59 FILCOTEN INFRA WITH 5 mm CAST IRON ANGLES ###### Channel vertical outlet 100 mm 150 mm 200 mm 300 mm Nominal diameter Connects to (4 in) (6 in) (8 in) (12 in) 100 mm (4 in) PVC or HDPE (1) FIL $ 54, mm (6 in) PVC* or HDPE (2) FIL $ 60, mm (8 in) PVC* or HDPE (3) FIL $ 66,74 $ 66,74 FIL Riser (side connection basin) Height 415 mm (16.3 in) (1) (2) (3) One 1ADRC04 required (sold separately). One 33ADR06 required (sold separately). One 33ADR08 required (sold separately). * Must be connected to the female end of 150 mm (6 in) and 200 mm (8 in) PVC pipe. 100 mm 150 mm 200 mm 300 mm (4 in) (6 in) (8 in) (12 in) FIL $ 299,73 Compatible only with side connection well FIL Vandal-proof lock FIL mm 150 mm 200 mm 300 mm (4 in) (6 in) (8 in) (12 in) FIL $ 27,81 FIL $ 37,39 FIL $ 44,29 Compatible with galvanized/perforated grates (optional). Up to two units per grate but only one required. Nuts and bolts FIL mm 150 mm 200 mm 300 mm (4 in) (6 in) (8 in) (12 in) FIL $ 7,42 $7,42 $ 7,42 FIL $ 11,12 - Above pricing is for 1 nut and 1 bolt. - Compatible with bolt on cast iron grate. - 4 nuts and bolts required per 0.5 m grate. 59

60 WEHOLITE (SMOOTH INTERIOR AND EXTERIOR) ###### Pipe Price / Meter Inside Outside RSC mm (18 in) 20.8 in 160 $ 310,43 $ 334,07 $ 287, mm (19.5 in) 22.7 in 160 $ 325,44 $ 349,20 $ 302, mm (21 in) 24.2 in 160 $ 355,41 $ 379,48 $ 332, mm (24 in) 27.6 in 160 $ 400,40 $ 424,94 $ 376, mm (27 in) 31 in 160 $ 445,39 $ 470,37 $ 421, mm (30 in) 34.3 in 160 $ 490,35 $ 515,78 $ 465, mm (33 in) 38.1 in 160 $ 610,31 $ 636,94 $ 584, mm (36 in) 40.3 in 250 $ 805,22 $ 833,85 $ 777, mm (40 in) 44.9 in 250 $ 971,19 $ 1,001,47 $ 941, mm (42 in) 48 in 250 $ 1,090,09 $ 1,121,62 $ 1,059, mm (48 in) 54.2 in 250 $ 1,289,53 $ 1,345,54 $ 1,253, mm (54 in) 61 in 250 $ 1,444,61 $ 1,504,52 $ 1,406, mm (60 in) 67.8 in 250 $ 1,599,72 $ 1,663,50 $ 1,560, mm (66 in) 74.6 in 250 $ 2,148,39 $ 2,221,06 $ 2,077, mm (72 in) 81.4 in 250 $ 2,670,25 $ 2,753,31 $ 2,589, mm (78 in) 87.4 in 250 $ 2,870,99 $ 2,971,25 $ 2,773, mm (84 in) 94.2 in 250 $ 3,397,89 $ 3,511,12 $ 3,288, mm (90 in) in 250 $ 3,786,43 $ 3,909,16 $ 3,667, mm (96 in)* 107 in 250 $ 4,612,44 $ 4,826,46 $ 4,404, mm (102 in)* in 250 $ 5,156,00 $ 5,396,78 $ 4,922, mm (108 in)* in 250 $ 5,733,74 $ 6,008,39 $ 5,467, mm (118 in)* in 250 $ 7,178,41 $ 7,515,75 $ 6,850, mm (132 in)* in 250 $ 8,921,14 $ 9,338,95 $ 8,515,64 1 : Threaded joint, length of 7.62 m (25 feet) : - Usually stock at St-Louis-de-Blandford, Quebec. 2 : Threaded joint, length of 7.62 m (25 feet). 3 : Threaded joint, length of 5.03 m (16.5 feet). 4 : Threaded joint, length of m (50 feet). 5 : Straight cut or prepared for fusion, lengths of 5.03 m (16.5 feet), 7.62 m (25 feet) and m (50 feet). - Special order / FOB Huntsville, Ontario (Allow a minimum of 4 weeks for availability upon reception of your order). * Oversized pipe : Freight rates available upon request. - Pricing of BNQ certified pipe available upon request. 5 $ 264,60 $ 279,31 $ 308,69 $ 352,80 $ 396,88 $ 440,97 $ 558,58 $ 749,70 $ 912,39 $ 1,028,98 $ 1,216,53 $ 1,368,59 $ 1,520,64 $ 2,007,25 $ 2,509,07 $ 2,676,34 $ 3,178,17 $ 3,548,20 $ 4,196,99 $ 4,688,67 $ 5,200,62 $ 6,523,58 $ 8,110,14 Wehoseal Dimension(s) Sold per roll only. 17 po x 100 pi WEHOSEAL17100 $ 1,559,08 60

61 DUROMAXX ###### Pipe Legend : Plain end : No coupling HP : High pressure bell and gasket (103.4 kpa or 15 psi) Price / Meter Plain end HP 750 mm (30 in) DM0750 On request 900 mm (36 in) DM0900 On request mm (42 in) DM1050 On request mm (48 in) DM1200 On request mm (54 in) DM1350 On request mm (60 in) DM1500 On request mm (66 in) DM1650 On request mm (72 in) DM1800 On request mm (84 in) DM2100 On request mm (96 in)* DM2400 On request mm (110 in)* DM2750 On request mm (120 in)* DM3000 On request - Special order / FOB Montgomery, AL (Allow a minimum of 4 weeks for availability upon reception of your order). * Oversized pipe : Freight rates available upon request. * The lengths vary according to the diameter For more information, please contact our customer service. 61

62 SMOOTH EXTERIOR AND SMOOTH INTERIOR ###### Pipe Length Price / Meter 450 mm (18 in) 3 m PCG $ 515, mm (21 in) 3 m PCG $ 594, mm (24 in) 3 m PCG $ 714, mm (30 in) 3 m PCG $ 922, mm (36 in) 3 m PCG $ 1,174, mm (42 in) 3.30 m PCG $ 1,345, mm (48 in) 3.30 m PCG $ 1,258, mm (60 in) 6 m PCG $ 3,772, PCG Sacrifice pipe 33TS mm (18 in) 33TS18 $ 382, mm (21 in) 33TS21 $ 492, mm (24 in) 33TS24 $ 517, mm (30 in) 33TS30 $ 650, mm (36 in) 33TS36 $ 803, mm (42 in) 33TS42 $ 979, mm (48 in) 33TS48 $ 1,093, mm (60 in) 33TS60 $ 1,384,08 Steel cross 33XA183P 450 mm (18 in) 33XA183P $ 479, mm (21 in) 33XA213P $ 536, mm (24 in) 33XA243P $ 584, mm (30 in) 33XA303P $ 682, mm (36 in) 33XA363P $ 747, mm (42 in) 33XA423P $ 909, mm (48 in) 33XA483P $ 999, mm (60 in) 33XA603P $ 1,234,62 62

63 SMOOTH EXTERIOR CATCH BASIN ###### Catch basin Standard height 450 mm (18 in) 2 m (6.56 ft) 33P183P $ 796, mm (24 in) 2 m (6.56 ft) 33P243P $ 1,335, mm (30 in) 2 m (6.56 ft) 33P303P $ 1,746, mm (36 in) 2 m (6.56 ft) 33P363P $ 2,444,31 33P243P Outlets sold separately. Additional height Price / Meter 450 mm (18 in) 33PH183P $ 558, mm (24 in) 33PH243P $ 740, mm (30 in) 33PH303P $ 1,037, mm (36 in) 33PH363P $ 1,200,04 Outlet Plain end C CGI PVCF Multiaxial 100 mm (4 in) 33PS04 $ 53,82 $ 60,20 $ 66, mm (4 in) MPGMA04 $ 145, mm (6 in) 33PS06 $ 56,65 $ 69,77 $ 84, mm (6 in) MPGMA06 $ 177, mm (8 in) 33PS08 $ 61,07 $ 82,04 $ 109, mm (8 in) MPGMA08 $ 216, mm (10 in) 33PS10 $ 66,38 $ 101,94 $ 139,17 $ 166, mm (12 in) 33PS12 $ 98,21 $ 143,63 $ 194, mm (15 in) 33PS15 $ 133,17 $ 215,30 $ 262, mm (18 in) 33PS18 $ 160,23 $ 267,62 $ 317, mm (21 in) 33PS21 $ 215,29 $ 366,89 $ 489, mm (24 in) 33PS24 $ 261,69 $ 560,34 $ 745, mm (30 in) 33PS30 $ 408,54 $ 814,16 $ 892, mm (36 in) 33PS36 $ 620,74 $ 1,078,88 $ 1,438,04 Legend : Plain end : No coupling C : Soil tight (snap bell) CGI : Water tight PVCF : Water tight PVC female 63

64 SMOOTH EXTERIOR CATCH BASIN ###### Galvanized steel ladder Installation Factory Factory Description Ladder leg Ladder Price 33ECHEPAT* 53.23$ / unit 33ECHEPIED** $ / foot * 4 units required per ladder. ** Deduct 17 in ( m) from the overall height of your catch basin to determine the required height of the ladder. ** The distance between each step is 12 in ( m). Lifting ring Installation Factory 33POEILLET $ 97,48 Two rings required per manhole. Grommet for retention bell Installation Factory 33POEILLETCLO $ 64,97 Job site 33POEILLETCLO-C $ 73,11 Factory Job site Hook for retention bell Installation Factory 33PCROCHET $ 61,73 Job site 33PCROCHET-C $ 69,84 Factory Job site To purchase catch basins, please download our order form at 64

65 SMOOTH EXTERIOR MANHOLE ###### Manhole Standard height 600 mm (24 in) 2 m (6.56 ft) 33REG243P $ 1,335, mm (30 in) 2 m (6.56 ft) 33REG303P $ 1,746, mm (36 in) 2 m (6.56 ft) 33REG363P $ 2,444, mm (42 in) 2 m (6.56 ft) 33REG423P $ 8,410, mm (48 in) 2 m (6.56 ft) 33REG483P $ 9,474, mm (54 in) 2 m (6.56 ft) 33REG543P $ 17,708, mm (60 in) 2 m (6.56 ft) 33REG603P $ 23,664, mm (66 in) 2 m (6.56 ft) 33REG663P $ 29,621, mm (72 in) 2 m (6.56 ft) 33REG723P $ 34,233, mm (78 in) 2 m (6.56 ft) 33REG783P $ 37,233, mm (84 in) 2 m (6.56 ft) 33REG843P $ 43,283, mm (90 in) 2 m (6.56 ft) 33REG903P $ 48,852,06 33REG483P mm (96 in)* 2 m (6.56 ft) 33REG963P $ 55,774,07 Outlets sold separately mm (102 in)* 2 m (6.56 ft) 33REG1023P $ 60,574, mm (108 in)* 2 m (6.56 ft) 33REG1083P $ 70,641, mm (118 in)* 2 m (6.56 ft) 33REG1203P $ 80,893, mm (132 in)* 2 m (6.56 ft) 33REG1323P $ 97,671,62 Additional height Price / Meter 600 mm (24 in) 33PH243P $ 740, mm (30 in) 33PH303P $ 1,037, mm (36 in) 33PH363P $ 1,200, mm (42 in) 33PH423P $ 1,243, mm (48 in) 33PH483P $ 1,415,01 Outlet Plain end C CGI PVCF Multiaxial 100 mm (4 in) 33PS04 $ 53,82 $ 60,20 $ 66, mm (4 in) MPGMA04 $ 145, mm (6 in) 33PS06 $ 56,65 $ 69,77 $ 84, mm (6 in) MPGMA06 $ 177, mm (8 in) 33PS08 $ 61,07 $ 82,04 $ 109, mm (8 in) MPGMA08 $ 216, mm (10 in) 33PS10 $ 66,38 $ 101,94 $ 139,17 $ 166, mm (12 in) 33PS12 $ 98,21 $ 143,63 $ 194, mm (15 in) 33PS15 $ 133,17 $ 215,30 $ 262, mm (18 in) 33PS18 $ 160,23 $ 267,62 $ 317, mm (21 in) 33PS21 $ 215,29 $ 366,89 $ 489, mm (24 in) 33PS24 $ 261,69 $ 560,34 $ 745, mm (30 in) 33PS30 $ 408,54 $ 814,16 $ 892, mm (36 in) 33PS36 $ 620,74 $ 1,078,88 $ 1,438, mm (42 in) 33PS42 $ 1,963,84 $ 2,234, mm (48 in) 33PS48 $ 2,235,31 $ 2,457,48 Legend : Plain end : No coupling C : Soil tight (snap bell) CGI : Water tight PVCF : Water tight PVC female 65

66 SMOOTH EXTERIOR MANHOLE ###### Galvanized steel ladder Installation Factory Factory Description Ladder leg Ladder Price 33ECHEPAT* 53.23$ / unit 33ECHEPIED** $ / foot * 4 units required per ladder. ** Deduct 17 in ( m) from the overall height of your manhole to determine the required height of the ladder. ** The distance between each step is 12 in ( m). Lifting ring Installation Factory 33POEILLET $ 97,48 Two rings required per catch basin. Grommet for retention bell Installation Factory 33POEILLETCLO $ 64,97 Job site 33POEILLETCLO-C $ 73,11 Factory Job site Hook for retention bell Installation Factory 33PCROCHET $ 61,73 Job site 33PCROCHET-C $ 69,84 Factory Job site To purchase smooth exterior manholes, please download our order form at 66

67 CORRUGATED CATCH BASIN ###### Catch basin Standard height 300 mm (12 in) 1.3 m (4.27 ft) 33P1200 $ 158, mm (15 in) 1.3 m (4.27 ft) 33P1500 $ 218, mm (18 in) 1.3 m (4.27 ft) 33P1800 $ 274, mm (24 in) 1.3 m (4.27 ft) 33P2400 $ 431, mm (30 in) 1.3 m (4.27 ft) 33P3000 $ 618, mm (36 in) 1.3 m (4.27 ft) 33P3600 $ 983, mm (42 in) 1.3 m (4.27 ft) 33P4200 $ 1,217, mm (48 in) 1.3 m (4.27 ft) 33P4800 $ 1,452,64 33P2400 Outlets sold separately. Additional height Price / Meter 300 mm (12 in) 33PH12 $ 65, mm (15 in) 33PH15 $ 103, mm (18 in) 33PH18 $ 137, mm (24 in) 33PH24 $ 235, mm (30 in) 33PH30 $ 366, mm (36 in) 33PH36 $ 566, mm (42 in) 33PH42 $ 629, mm (48 in) 33PH48 $ 670,07 Outlet Plain end C CGI PVCF Multiaxial 100 mm (4 in) 33PS04 $ 53,82 $ 60,20 $ 66, mm (4 in) MPGMA04 $ 145, mm (6 in) 33PS06 $ 56,65 $ 69,77 $ 84, mm (6 in) MPGMA06 $ 177, mm (8 in) 33PS08 $ 61,07 $ 82,04 $ 109, mm (8 in) MPGMA08 $ 216, mm (10 in) 33PS10 $ 66,38 $ 101,94 $ 139,17 $ 166, mm (12 in) 33PS12 $ 98,21 $ 143,63 $ 194, mm (15 in) 33PS15 $ 133,17 $ 215,30 $ 262, mm (18 in) 33PS18 $ 160,23 $ 267,62 $ 317, mm (21 in) 33PS21 $ 215,29 $ 366,89 $ 489, mm (24 in) 33PS24 $ 261,69 $ 560,34 $ 745, mm (30 in) 33PS30 $ 408,54 $ 814,16 $ 892, mm (36 in) 33PS36 $ 620,74 $ 1,078,88 $ 1,438, mm (42 in) 33PS42 $ 1,963,84 $ 2,234, mm (48 in) 33PS48 $ 2,235,31 $ 2,457,48 Legend : Plain end : No coupling C : Soil tight (snap bell) CGI : Water tight PVCF : Water tight PVC female 67

68 CORRUGATED CATCH BASIN ###### Polyethylene grate 300 mm (12 in) 33GP012 $ 103, mm (15 in) 33GP015 $ 160, mm (18 in) 33GP018 $ 203,06 33GP012 Galvanized steel ladder Installation Factory Factory Description Ladder leg Ladder Price 33ECHEPAT* 53.23$ / unit 33ECHEPIED** $ / foot * 4 units required per ladder. ** Deduct 17 in ( m) from the overall height of your catch basin to determine the required height of the ladder. ** The distance between each step is 12 in ( m). Grommet for retention bell Installation Factory 33POEILLETCLO $ 64,97 Job site 33POEILLETCLO-C $ 73,11 Factory Hook for retention bell Job site Installation Factory 33PCROCHET $ 61,73 Job site 33PCROCHET-C $ 69,84 Factory Job site To purchase catch basins, please download our order form at 68

69 CAST IRON ###### Frame and grate kit 33FS450HC 300 mm (12 in) 33FS300HC $ 167, mm (15 in) 33FS375HC $ 287, mm (18 in) 33FS450HC $ 324, mm (22.5 in) 33FS600HC $ 610, mm (30 in) 33FS750HC $ 1,242, mm (36 in) 33FS900HC $ 1,429,90 Restricted to off-road use only. 69

70 MANHOLE AND CATCH BASIN RISER ###### 2 corrugation riser Height 450 mm (18 in) 136 mm (5.3 in) 33PH182A3P $ 263, mm (21 in) 151mm (6 in) 33PH212A3P $ 346, mm (24 in) 201 mm (7.9 in) 33PH242A3P $ 430, mm (30 in) 200 mm (7.9 in) 33PH302A3P $ 776, mm (36 in) 203 mm (8 in) 33PH362A3P $ 814,33 33PH242A3P 3 corrugation riser Height 450 mm (18 in) 203 mm (8 in) 33PH183A3P $ 313, mm (21 in) 227 mm (8.9 in) 33PH213A3P $ 412, mm (24 in) 301 mm (11.9 in) 33PH243A3P $ 511, mm (30 in) 300 mm (11.8 in) 33PH303A3P $ 922, mm (36 in) 305 mm (12 in) 33PH363A3P $ 969,42 33PH363A3P 70

71 PUISTAR ###### 600 mm (24 in) complete kit Description Ductile iron grate PSTARG610 $ 343,33 Ductile iron seat frame / 40 mm height PSTARCA40* $ 309,00 Ductile iron collector frame PSTARCC690 $ 556,89 HDPE flange (2 pieces) PSTARBAV14 $ 171, mm (24 in) grey iron head PSTART600 $ 267,10 Total for a complete kit : $ 1,647, mm (30 in) complete kit Description Ductile iron grate PSTARG610 $ 343,33 Ductile iron seat frame / 40 mm height PSTARCA40* $ 309,00 Ductile iron collector frame PSTARCC690 $ 556,89 HDPE flange (2 pieces) PSTARBAV14 $ 171, mm (30 in) grey iron head PSTART750 $ 677,06 Total for a complete kit : $ 2,057, mm (36 in) complete kit Description Ductile iron grate PSTARG610 $ 343,33 Ductile iron seat frame / 40 mm height PSTARCA40* $ 309,00 Ductile iron collector frame PSTARCC690 $ 556,89 HDPE flange (2 pieces) PSTARBAV14 $ 171, mm (36 in) grey iron head PSTART900 $ 1,295,06 Total for a complete kit : $ 2,675,95 Optional seat frames Description Ductile iron seat frame / 50 mm height PSTARCA50 $ 319,30 Ductile iron seat frame / 60 mm height PSTARCA60 $ 326,17 Exploded view Assembled view Grate Seat frame Collector frame Flange Head *Can be replaced by a 50 mm ou 60 mm seat frame. See our brochure at Our Puistar line of products is available out of St-Nicolas, Quebec only. 71

72 MONOLITHIC CONNECTOR ###### Main line Length kpa Plain end C CGI 300 mm (12 in) 4 m R320 ES $ 292, mm (12 in) 6 m R320 ES $ 373, mm (15 in) 4 m R320 ES $ 429, mm (15 in) 6 m R320 ES $ 588, mm (18 in) 4 m R320 ES $ 549, mm (18 in) 6 m R320 ES $ 776, mm (21 in) 4 m R320 ES $ 765, mm (21 in) 6 m R320 ES $ 938,38 $ 1,053, mm (24 in) 4 m R320 ES $ 1,057, mm (24 in) 6 m R320 ES $ 1,261,03 $ 1,389, mm (30 in) 4 m R320 ES $ 1,532, mm (30 in) 6 m R320 ES $ 1,826,03 $ 1,991, mm (36 in) 4 m R320 ES $ 2,219, mm (36 in) 6 m R320 ES $ 2,819,29 $ 3,041, mm (42 in) 3.30 m R145 ES $ 1,961, mm (48 in) 3.30 m R135 ES $ 2,046,83 Main line pricing does not include inlet pricing (see below). Inlet 100 mm (4 in) 33ES04 $ 162, mm (6 in) 33ES06 $ 198, mm (8 in) 33ES08 $ 234, mm (10 in) 33ES10 $ 279, mm (12 in) 33ES12 $ 334,54 ES CGI 72

73 PRE-TREATMENT CATCH BASIN ###### Catch basin Standard height 600 mm (24 in) 1.3 m (4.27 ft) 33PT24 $ 1,335, mm (30 in) 1.3 m (4.27 ft) 33PT30 $ 1,746, mm (36 in) 1.3 m (4.27 ft) 33PT36 $ 2,444,31 33PT36 Outlets sold separately. Elbow 100 mm (4 in) 33PC04 $ 177, mm (6 in) 33PC06 $ 227, mm (8 in) 33PC08 $ 295,66 Outlet Plain end C CGI PVCF Multiaxial 100 mm (4 in) 33PS04 $ 53,82 $ 60,20 $ 66, mm (4 in) MPGMA04 $ 145, mm (6 in) 33PS06 $ 56,65 $ 69,77 $ 84, mm (6 in) MPGMA06 $ 177, mm (8 in) 33PS08 $ 61,07 $ 82,04 $ 109, mm (8 in) MPGMA08 $ 216, mm (10 in) 33PS10 $ 66,38 $ 101,94 $ 139,17 $ 166, mm (12 in) 33PS12 $ 98,21 $ 143,63 $ 194, mm (15 in) 33PS15 $ 133,17 $ 215,30 $ 262, mm (18 in) 33PS18 $ 160,23 $ 267,62 $ 317, mm (21 in) 33PS21 $ 215,29 $ 366,89 $ 489, mm (24 in) 33PS24 $ 261,69 $ 560,34 $ 745,11 Legend : Plain end : No coupling C : Soil tight (snap bell) CGI : Water tight PVCF : Water tight PVC female 73

74 PERCOLATION WELL ###### Well Budget * 600 mm (24 in) 33PER24 $ 2,157, mm (30 in) 33PER30 $ 2,764, mm (36 in) 33PER36 $ 3,531, mm (42 in) 33PER42 $ 10,274, mm (48 in) 33PER48 $ 11,046, mm (54 in) 33PER54 $ 18,715, mm (60 in) 33PER60 $ 24,508, mm (66 in) 33PER66 $ 30,300, mm (72 in) 33PER72 $ 34,858, mm (78 in) 33PER78 $ 37,922, mm (84 in) 33PER84 $ 43,962, mm (90 in) 33PER90 $ 49,522, mm (96 in)* 33PER96 $ 56,435, mm (102 in)* 33PER102 $ 61,225, mm (108 in)* 33PER108 $ 71,284, mm (118 in)* 33PER120 $ 81,519, mm (132 in)* 33PER132 $ 98,279,19 * Budget pricing is supplied for general information purposes only. Percolation well units are specifically designed for each project. Final configuration and selected options will determine selling price. Standard height of 2 meters 33PER24 Outlets sold separately. 74

75 LINEAR CATCH BASIN ###### Linear catch basin Length Price / Meter 300 mm (12 in) 4 m 33PL12 $ 1,906, mm (15 in) 4 m 33PL15 $ 1,976, mm (18 in) 4 m 33PL18 $ 2,030, mm (21 in) 4 m 33PL21 $ 2,085, mm (24 in) 4 m 33PL24 $ 2,150,92 33PL18 Grate is made of galvanized steel and funnel is made of stainless steel. 75

76 STORM WATER SETTLING AND SEPARATION UNIT ###### Unit Budget * 6 m (19.68') 7.62 m (25') 12 m (39.37') 750 mm (30 in) 33UD30 $ 21,154,38 $ 25,369, mm (36 in) 33UD36 $ 25,178,90 $ 32,198, mm (42 in) 33UD42 $ 32,028,49 $ 42,467, mm (48 in) 33UD48 $ 34,097,66 $ 47,375, mm (54 in) 33UD54 $ 60,534, mm (60 in) 33UD60 $ 57,222,17 $ 70,112,34 $ 91,868, mm (66 in) 33UD66 $ 89,105, mm (72 in) 33UD72 $ 102,949, mm (78 in) 33UD78 $ 113,077, mm (84 in) 33UD84 $ 129,707, mm (90 in) 33UD90 $ 152,123, mm (96 in)* 33UD96 $ 172,137, mm (102 in)* 33UD102 $ 188,119, mm (118 in)* 33UD120 $ 247,651, mm (132 in)* 33UD132 $ 305,221,65 * Budget pricing is supplied for general information purposes only. Storm Water Settling and Separation units are specifically designed for each project. Final configuration and selected options will determine selling price. 33UD48 Storm Water Settling and Separation units of mm (54 in) and above are available out of St-Louis-de-Blandford, Quebec only. 76

77 OVERFLOW ###### Unit Standard height Budget * 450 mm (18 in) 2 m (6.56 ft) 33DEV18 $ 6,700, mm (21 in) 2 m (6.56 ft) 33DEV21 $ 7,004, mm (24 in) 2 m (6.56 ft) 33DEV24 $ 7,425, mm (30 in) On request 33DEV30 On request 900 mm (36 in) On request 33DEV36 On request mm (42 in) On request 33DEV42 On request mm (48 in) On request 33DEV48 On request mm (54 in) On request 33DEV54 On request mm (60 in) On request 33DEV60 On request mm (66 in) On request 33DEV66 On request mm (72 in) On request 33DEV72 On request mm (78 in) On request 33DEV78 On request mm (84 in) On request 33DEV84 On request mm (90 in) On request 33DEV90 On request mm (102 in)* On request 33DEV102 On request mm (108 in)* On request 33DEV108 On request mm (118 in)* On request 33DEV120 On request mm (132 in)* On request 33DEV132 On request * Budget pricing is supplied for general information purposes only. Overflow units are specifically designed for each project. Final configuration and selected options will determine selling price. 33DEV36 Overflows of mm (54 in) and above are available out of St-Louis-de-Blandford, Quebec only. 77

78 STORMCHAMBER ###### Chamber Description Volume Start unit 2.12 m3 (74.8 pi3) SC0001 $ 916,03 End unit 2.12 m3 (74.8 pi3) SC0002 $ 916,03 Middle unit 2.12 m3 (74.8 pi3) SC0003 $ 916,03 Closed unit 2.12 m3 (74.8 pi3) SC0004 $ 916,03 SC0001 Sediment trap 750 mm (30 in) SC0005 $ 1,832,06 Stabilization netting and geotextile Description Dimension(s) Light duty geogrid roll 2 m x 91 m SC0006 $ 920,36 Heavy duty geogrid panel 2 m x 3 m SC0010 $ 816,89 Geotextile 3.5 m x 150 m TX90CHAMBRES $ 1.91 SC0006 SC0010 Cast iron adjustable frame and cover Description 250 mm (10 in) 250 mm (10 in) 33CA10SC $ 814,16 See our installation vidéo at : Orange StormChamber. Products may be delivered in orange or black, depending on stock availability. Our StormChamber line of products is available out of St-Nicolas, Quebec only. 78

79 HYDROSTOR HS75 ###### Chamber Volume 1.31 m3 (46.4 pi3) HS75-CH $ 663,77 End cap and access well HS75-EM $ 412,00 HS75PUITACCES* $ HS75-EM HS75PUITACCES *Factory installed only. Stabilization netting Dimension(s) 1.83 m x 91.4 m (6 ft x 300 ft) HSSG-350 $ 1,201,67 Sold per roll only. Cast iron adjustable frame and cover Description 250 mm (10 in) 250 mm (10 in) 33CA10SC $ 814,16 Geotextile Dimension(s) Price / Sq m 4.57 m x 92 (14.99 ft x ft ) GT $2, m x 150 m (11.48 ft x ft) TX90CHAMBRES $ 1.92 Our HydroStor HS75 line of products is available out of St-Nicolas, Quebec only. 79

80 HYDROSTOR HS180 ###### Chamber Volume 3.22m3 (113.6 pi3) HS180-CH $ 1,087,23 End cap and access well HS180-EM $ 686,67 HS180PUITACCES* $ HS180-EM HS180PUITACCES *Factory installed only. Stabilization netting Dimension(s) 1.83 m x 91.4 m (6 ft x 300 ft) HSSG-350 $ 1,201,67 Sold per roll only. Cast iron adjustable frame and cover Description 250 mm (10 in) 250 mm (10 in) 33CA10SC $ 814,16 Geotextile Dimension(s) Price / Sq m 4.57 m x 92 m (14.99 ft x ft ) GT $2, m x 150 m (11.48 ft x ft) TX90CHAMBRES $ 1.92 Our HydroStor HS180 line of products is available out of St-Nicolas, Quebec only. 80

81 HYDROSTOR PRETREATMENT SYSTEM ###### Unit 4 m (13.12') 6 m (19.68') 900 mm (36 in) 33UPT3604 $ 4,499,85 Unite de pre-tr 900 mm (36 in) 33UPT3606 $ 5,631,93 Unite de pre-tr mm (42 in) 33UPT4204 $ 5,083,60 Unite de pre-tr mm (42 in) 33UPT4206 $ 6,341,60 Unite de pre-tr mm (48 in) 33UPT4804 $ 6,131,57 Unite de pre-tr mm (48 in) 33UPT4806 $ 7,471,69 Unite de pre-tr mm (60 in) 33UPT6004 $ 11,863,24 Unite de pre-tr mm (60 in) 33UPT6006 $ 15,227,79 Unite de pre-tr Riser Outlet to diffuser Outlet to chamber Inlet Unit Extra length Inlet 33UPTE12CGI Price / Meter 750 mm (30 in) 33UPTL30 $ 366,56 Unite de pre 900 mm (36 in) 33UPTL36 $ 566,04 Unite de pre mm (42 in) 33UPTL42 $ 629,00 Unite de pre mm (48 in) 33UPTL48 $ 670,07 Unite de pre mm (60 in) 33UPTL60 $ 1,682,28 Unite de pre 300 mm (12 in) 33UPTE12CGI $ 551,84 Entree d`uni 375 mm (15 in) 33UPTE15CGI $ 777,56 Entree d`uni 450 mm (18 in) 33UPTE18CGI $ 992,46 Entree d`uni 525 mm (21 in) 33UPTE21CGI $ 1,234,28 Entree d`uni 600 mm (24 in) 33UPTE24CGI $ 1,386,39 Entree d`uni 750 mm (30 in) 33UPTE30CGI $ 1,452,80 Entree d`uni 81

82 HYDROSTOR PRETREATMENT SYSTEM ###### Outlet to chamber 33UPTSC12CGI Outlet to diffuser 33UPTSD12CCG 300 mm (12 in) 33UPTSC12CGI $ 452,48 Sortie droite 375 mm (15 in) 33UPTSC15CGI $ 669,57 Sortie droite 450 mm (18 in) 33UPTSC18CGI $ 919,94 Sortie droite 525 mm (21 in) 33UPTSC21CGI $ 1,366,99 Sortie droite 600 mm (24 in) 33UPTSC24CGI $ 1,627,38 Sortie droite 750 mm (30 in) 33UPTSC30CGI $ 1,905,57 Sortie droite 300 mm (12 in) 33UPTSD12CCGI $ 539,91 Sortie vers D 375 mm (15 in) 33UPTSD15CCGI $ 875,19 Sortie vers D 450 mm (18 in) 33UPTSD18CCGI $ 1,270,01 Sortie vers D 525 mm (21 in) 33UPTSD21CCGI $ 1,848,99 Sortie vers D 600 mm (24 in) 33UPTSD24CCGI $ 2,303,52 Sortie vers D 750 mm (30 in) 33UPTSD30CCGI $ 2,810,98 Sortie vers D Riser (from 0.3 m to 1 m in height) Description Height Price Corrugated ext. (off-road use) 1 m (3.28 ft) 750 mm (30 in) 33UPTBC30-A1.0* $ / m BASE/CHEMIN Smooth ext. (roadway use) 1 m (3.28 ft) 750 mm (30 in) 33UPTBC30-L1.0* $ / m BASE/CHEMIN * Factory installed. 33UPTBC30-A1.0 33UPTBC30-L1.0 Riser (over 1 m in height) Description Height Price Corrugated ext. (off-road use) 0.4 m (1.31 ft) 750 mm (30 in) 33UPTBC30-A0.4* $ / unit BASE/CHEMIN Corrugated ext. (off-road use) 1 m (3.28 ft) 750 mm (30 in) 33UPTC30-A1.0** $ / m CHEMINEE 30 Smooth ext. (roadway use) 1 m (3.28 ft) 750 mm (30 in) 33UPTC30-L1.0** 1,568.91$ / m CHEMINEE 30 * Factory installed. ** To be installed by contractor on jobsite. 33UPTBC30-A0.4 33UPTC30-A1.0 33UPTC30-L1.0 Cast iron 775 mm (31 in) 33GCUT30TR $ 923,40 TAMPON TS 775 mm (31 in) 33GSL77511S $ 1,085,41 CADRE AJU 82

83 NEMO ###### mm (6 ft) tubular retention tank Volume Length Required qty Liters USG mm in NETENDEUR06 MPNEBLOCK NERES7600L $ 6,127, NERES9500L $ 7,451, NERES11500L $ 8,790, NERES13000L $ 10,187, NERES15000L $ 11,584, NERES17000L $ 12,484, NERES19000L $ 13,650, NERES21000L $ 14,916, NERES23000L $ 16,123,41 Allow a minimum of 4 to 6 business weeks for availability of merchandise upon reception of your purchase order. Our Nemo line of products is available out of Ham-Nord, Quebec only. 83

84 NEMO ###### mm (6 ft) tubular retention tank - Options Description 100 mm (4 in) outlet NESORTIE04 $ 429, mm (6 in) outlet NESORTIE06 $ 453, mm (8 in) outlet NESORTIE08 $ 870, mm (10 in) outlet NESORTIE10 $ 2,170, mm (12 in) outlet NESORTIE12 $ 3,396, mm (4 in) vent NEEVENT04 $ 1,042,26 Concrete 544 kg (1 200 lbs) block with anchors MPNEBLOCK544 $ 367,85 Strap (1) and turnbuckle (2) kit NETENDEUR06 $ 613, mm (30 in) manhole adaptor NEADR30** $ 858, mm (30 in) x 2 m (6.56 ft) smooth ext. catch basin NE33CH303P*** No charge Cast iron Aqua-Swirl Fonte ** Factory installed. *** To be installed by contractor on jobsite. 775 mm (31 in) 775 mm (31 in) Description Adjustable Frame Cover 33GSL77511 $ 1,456,42 33GCUT30ST $ 923,40 Model and options shown mm (6 ft) tank mm (4 in) outlet - Concrete block (4) - Strap and turnbuckle kit (2) - Manhole adaptor - Smooth exterior catch basin - Cover - Adjustable frame 84

85 NEMO ###### mm (8 ft) tubular retention tank Volume Length Required qty Liters USG mm in NETENDEUR08 MPNEBLOCK NERES18731L $ 15,169, NERES20538L $ 16,330, NERES22345L $ 17,490, NERES24152L $ 18,651, NERES25959L $ 19,812, NERES27767L $ 20,972, NERES29574L $ 22,133, NERES31381L $ 23,293, NERES33188L $ 24,454, NERES34995L $ 25,614, NERES36802L $ 26,775, NERES38610L $ 27,935, NERES40417L $ 29,096, NERES42224L $ 30,256, NERES44031L $ 31,417, NERES45838L $ 32,577, NERES47646L $ 33,738, NERES50083L $ 36,190, NERES51890L $ 37,351, NERES53697L $ 38,511, NERES55504L $ 39,672, NERES57331L $ 40,832, NERES59119L $ 41,993, NERES60926L $ 43,153, NERES62733L $ 44,314, NERES65170L $ 46,766, NERES66977L $ 47,926, NERES68784L $ 49,087, NERES70591L $ 50,247, NERES72399L $ 51,408, NERES74206L $ 52,569, NERES76013L* $ 53,729,52 - Allow a minimum of 4 to 6 business weeks for availability of merchandise upon reception of your purchase order. - * Oversized tanks : Freight rates available upon request. - Overall diameter : mm (7 ft 11 in 1/2). Our Nemo line of products is available out of Ham-Nord, Quebec only. 85

86 NEMO ###### mm (8 ft) tubular retention tank - Options Description 100 mm (4 in) outlet NESORTIE04 $ 429, mm (6 in) outlet NESORTIE06 $ 453, mm (8 in) outlet NESORTIE08 $ 870, mm (10 in) outlet NESORTIE10 $ 2,170, mm (12 in) outlet NESORTIE12 $ 3,396, mm (4 in) vent NEEVENT04 $ 1,042,26 Concrete 544 kg (1 200 lbs) block with anchors MPNEBLOCK544 $ 367,85 Strap (1) and turnbuckle (2) kit NETENDEUR08 $ 735, mm (30 in) manhole adaptor NEADR30** $ 858, mm (30 in) x 2 m (6.56 ft) smooth ext. catch basin NE33CH303P*** No charge Cast iron Aqua-Swirl Fonte ** Factory installed. *** To be installed by contractor on jobsite. 775 mm (31 in) 775 mm (31 in) Description Adjustable Frame Cover 33GSL77511 $ 1,456,42 33GCUT30ST $ 923,40 Model and options shown mm (8 ft) tank mm (4 in) outlet - Concrete block (4) - Strap and turnbuckle kit (2) - Manhole adaptor - Smooth exterior catch basin - Cover - Adjustable frame 86

87 NEMO ###### mm (10 ft) tubular retention tank Volume Length Required qty Liters USG mm in NETENDEUR10 MPNEBLOCK NERES39133L $ 24,517, NERES42210L $ 26,179, NERES45228L $ 27,840, NERES48364L $ 29,502, NERES51442L $ 31,164, NERES54519L $ 32,826, NERES57596L $ 34,488, NERES60673L $ 36,150, NERES63750L $ 37,812, NERES66828L $ 39,474, NERES69905L $ 41,136, NERES72982L $ 42,798, NERES76059L $ 44,460, NERES79136L $ 46,122, NERES82214L $ 47,784, NERES85847L $ 51,523, NERES88924L $ 53,185, NERES92001L $ 54,847, NERES95079L $ 56,509, NERES98156L $ 58,171, NERES101233L $ 59,832, NERES104310L $ 61,494, NERES107387L $ 63,156, NERES110465L $ 64,818, NERES113542L $ 66,480, NERES117175L $ 70,219, NERES120252L $ 71,881, NERESL123330L $ 73,543, NERESL126407L $ 75,205, NERES129484L* $ 76,867, NERES132561L* $ 78,529, NERES135638L* $ 80,191, NERES138716L* $ 81,853, NERES141793L* $ 83,515, NERES144603L* $ 85,177, NERES148503L* $ 88,915, NERES151301L* $ 90,577, NERES157735L* $ 93,901,75 - Allow a minimum of 4 to 6 business weeks for availability of merchandise upon reception of your purchase order. - * Oversized tanks : Freight rates available upon request. - Overall diameter : mm (10 ft 3 in 3/8). Our Nemo line of products is available out of Ham-Nord, Quebec only. 87

88 NEMO ###### mm (10 ft) tubular retention tank - Options Description 100 mm (4 in) outlet NESORTIE04 $ 429, mm (6 in) outlet NESORTIE06 $ 453, mm (8 in) outlet NESORTIE08 $ 870, mm (10 in) outlet NESORTIE10 $ 2,170, mm (12 in) outlet NESORTIE12 $ 3,396, mm (4 in) vent NEEVENT04 $ 1,042,26 Concrete 544 kg (1 200 lbs) block with anchors MPNEBLOCK544 $ 367,85 Strap (1) and turnbuckle (2) kit NETENDEUR10 $ 858, mm (30 in) manhole adaptor NEADR30** $ 858, mm (30 in) x 2 m (6.56 ft) smooth ext. catch basin NE33CH303P*** No charge Cast iron Aqua-Swirl Fonte ** Factory installed. *** To be installed by contractor on jobsite. 775 mm (31 in) 775 mm (31 in) Description Adjustable Frame Cover 33GSL77511 $ 1,456,42 33GCUT30ST $ 923,40 Model and options shown mm (10 ft) tank mm (4 in) outlet - Concrete block (4) - Strap and turnbuckle kit (2) - Manhole adaptor - Smooth exterior catch basin - Cover - Adjustable frame 88

89 AQUA-SWIRL ###### Offline AS mm (30 in) AS02 $ 22,603, mm (42 in) AS03 $ 43,517, mm (54 in) AS04 $ 52,038, mm (60 in) AS05 $ 69,079, mm (72 in) AS06 $ 76,825, mm (84 in) AS07 $ 98,889, mm (96 in) AS08 $ 117,315, mm (108 in) AS09 $ 145,834, mm (120 in) AS10 $ 182,686, mm (132 in) AS11 $ 213,201, mm (144 in) AS12 $ 224,517,24 Aqua-Swirls are available out of St-Louis-de-Blandford, Quebec only. Inline AS05IN 750 mm (30 in) AS02IN $ 23,777, mm (42 in) AS03IN $ 44,691, mm (54 in) AS04IN $ 53,212, mm (60 in) AS05IN $ 70,957, mm (72 in) AS06IN $ 79,172, mm (84 in) AS07IN $ 103,466, mm (96 in) AS08IN $ 122,831, mm (108 in) AS09IN $ 152,524, mm (120 in) AS10IN $ 191,254, mm (132 in) AS11IN $ 222,984, mm (144 in) AS12IN $ 234,342,66 Aqua-Swirls are available out of St-Louis-de-Blandford, Quebec only. Cast iron Description 775 mm (31 in) 775 mm (31 in) 33GCUT30TR 775 mm (31 in) Adjustable Frame 33GSL77511S $ 923,40 $ 1,085,41 89

90 AQUA-FILTER ###### Unit Length # of chimneys mm (98 in) mm (72 in) 1 AFX1 $ 62,624, mm (122 in) mm (72 in) 1 AFX2 $ 80,546, mm (146 in) mm (72 in) 1 AFX3 $ 114,330, mm (170 in) mm (72 in) 2 AFX4 $ 134,930, mm (194 in) mm (72 in) 2 AFX5 $ 155,530, mm (218 in) mm (72 in) 2 AFX6 $ 179,220, mm (242 in) mm (72 in) 2 AFX7 $ 200,850, mm (266 in) mm (72 in) 2 AFX8 $ 222,480, mm (290 in) mm (72 in) 3 AFX9 $ 237,930, mm (314 in) mm (72 in) 3 AFX10 $ 253,380, mm (338 in) mm (72 in) 3 AFX11 $ 270,890, mm (362 in) mm (72 in) 3 AFX12 $ 288,400, mm (386 in) mm (72 in) 3 AFX13 $ 305,910, mm (410 in) mm (72 in) 3 AFX14 $ 323,420, mm (434 in) mm (72 in) 4 AFX15 $ 340,836, mm (458 in) mm (72 in) 4 AFX16 $ 354,881, Aqua-Filters must always be installed with an Aqua-Swirl. Contact Soleno to find out which model is required for your project. Frames and covers are sold separately. One frame and one cover required per chimney. Aqua-Filters are available out of St-Louis-de-Blandford, Quebec only. Cast iron Description 775 mm (31 in) Adjustable Frame 33GSL77511 $ 1,456,42 Guiding frame 33GLGC775 $ 964, mm (31 in) 775 mm (31 in) 33GCUT30TR $ 923, mm (31 in) Adjustable Frame 33GSL77511S $ 1,085,41 90

91 CORRUGATED STEEL PIPE ###### 38 mm x 6.5 mm Corrugation Profile (1.5 in x in) Bands / # corrugations 1.6 mm 2.0 mm 2.8 mm 3.5 mm mm (6 in) $ 38,95 $ 28, mm (8 in) $ 54,48 $ 31, mm (10 in) $ 63,82 $ 36,34 68 mm x 13 mm Corrugation Profile (2.68 in x 0.51 in) Bands / # corrugations 1.6 mm 2.0 mm 2.8 mm 3.5 mm mm (12 in) $ 65,16 $ 89,34 $ 44,06 $ 68,48 $ 117, mm (15 in) $ 83,90 $ 111,84 $ 50,38 $ 79,00 $ 134, mm (16 in) $ 90,11 $ 118,31 $ 52,31 $ 81,65 $ 140, mm (18 in) $ 101,04 $ 134,32 $ 185,08 $ 56,55 $ 88,31 $ 152, mm (20 in) $ 111,96 $ 147,20 $ 191,66 $ 60,61 $ 94,66 $ 163, mm (24 in) $ 130,57 $ 172,92 $ 228,30 $ 68,92 $ 107,58 $ 186, mm (28 in) $ 152,41 $ 201,75 $ 265,01 $ 121,17 $ 210, mm (30 in) $ 161,74 $ 217,82 $ 288,62 $ 127,66 $ 225, mm (32 in) $ 175,97 $ 237,31 $ 310,34 $ 133,98 $ 232, mm (36 in) $ 201,62 $ 267,04 $ 347,75 $ 475,45 $ 147,13 $ 285, mm (40 in) $ 307,43 $ 403,36 $ 553,38 $ 160,38 $ 306, mm (48 in) $ 401,28 $ 521,40 $ 714,01 $ 186,56 $ 349, mm (56 in) $ 242,06 $ 420, mm x 26 mm Corrugation Profile (4.92 in x 1.02 in) Bands / # corrugations 1.6 mm 2.0 mm 2.8 mm 3.5 mm mm (56 in) $ 472,84 $ 673,42 $ 880,67 $ 242,06 $ 420, mm (60 in) $ 504,46 $ 716,87 $ 937,70 $ 259,55 $ 450, mm (64 in) $ 539,44 $ 763,13 $ 994,84 $ 268,09 $ 465, mm (72 in) $ 855,91 $ 1,116,17 $ 501, mm (80 in) $ 952,27 $ 1,209,07 $ 546, mm (88 in) $ 1,045,11 $ 1,326,77 $ 590, mm (96 in) $ 1,138,72 $ 1,451,78 $ 636, mm (108 in)* $ 1,630,31 $ 751, mm (118 in)* $ 1,657,87 $ 819, mm (132 in)* $ 1,980,18 $ 886, mm (144 in)* $ 2,165,74 $ 954,14 - All pipe pricing is expressed in meters. - Standard pipes are 6, 9 and 12 meters lengths. - Non standard lengths available upon request. - Bevelled cut pricing is equivalent to pricing of a 9 corrugation band. - All pricing is FOB, Ste-Madeleine, Quebec. - Accessories available upon request. * Oversized pipe : Freight rates available upon request. 91

92 GEOTEXTILE ###### Epurtex Dimension(s) Application(s) Price / Sq m 1.5 m x 50 m (4.92 ft x ft) A GTEP15050 $ 1,69 Surface area : 75 square meters (807 square feet) 3 m x 150 m (9.84 ft x ft) A GTEP30150 $ 1,69 Surface area : 450 square meters (4 843 square feet) TX-80 - BNQ Certified 1.75 m x 30 m (5.74 ft x ft) B & C GT76073 $ 2,55 Surface area : 52.5 square meters (565 square feet) 1.17 m x 150 m ( 3.84 ft x ft) B & C GT76074 $ 2,41 Surface area : square meters (1 889 square feet) 1.75 m x 150 m (5.74 ft x ft) B & C GT76075 $ 2,15 Surface area : square meters (2 825 square feet) 0.7 m x 50 m (2.29 ft x ft) B & C GT76078 $ 2,55 Surface area : 35 square meters (376 square feet) 3.5 m x 150 m (11.48 ft x ft) B & C GT76079 $ 2,15 Surface area : 525 square meters (5 651 square feet) TX BNQ Certified 3.5 m x 100 m (11.48 ft x ft) C & E GT76129 $ 3,03 Surface area : 350 square meters ( square feet) TX-F 3.5 m x 50 m (11.48 ft x ft) D GT76165F $ 3,50 Surface area : 175 square meters (1 884 square feet) 3.5 m x 100 m (11.48 ft x ft) D GT76169F $ 3,50 Surface area : 350 square meters ( square feet) APPLICATION(S) : A- Wastewater disposal field. B- Drainage trenches, filter-envelopes (perforated pipes), behind retaining walls (gabions, concrete). C- Roads and accessways, residential driveways, sidewalks, parking lots. D- Forestry. E- Protecting geomembranes, aquatic basins. Contact your sales representative for details regarding our 500$, 2500$, et 5000$ programs. 92

93 SOL SOL SOL SOL SOL SOL FLOW REGULATOR ###### Plug style flow regulator 200 mm (8 in) 33RD08 On request 250 mm (10 in) 33RD10 On request 300 mm (12 in) 33RD12 On request 375 mm (15 in) 33RD15 On request 450 mm (18 in) 33RD18 On request 600 mm (24 in) 33RD24 On request SOL1 SOL1 SOL1 SOL1 SOL1 SOL1 Plater flow regulator 200 mm (8 in) 250 mm (10 in) 300 mm (12 in) 375 mm (15 in) 450 mm (18 in) 600 mm (24 in) 33RD08 33RD10 33RD12 33RD15 33RD18 33RD24 On request On request On request On request On request On request SOL2 SOL2 SOL2 SOL2 SOL2 SOL2 SOL2 SOL2 SOL2 Vortex flow regulator 200 mm (8 in) 250 mm (10 in) 300 mm (12 in) 350 mm (14 in) 450 mm (18 in) 500 mm (20 in) 550 mm (22 in) 600 mm (24 in) 700 mm (28 in) 33RD08 33RD10 33RD12 33RD14 33RD18 33RD20 33RD22 33RD24 33RD28 On request On request On request On request On request On request On request On request On request 93

94 PICK-UP POLICY 90 A FEW TIPS REGARDING CUSTOMER PICK-UPS : 1- Hours of service for loading are from 8:00 am to 12:00 pm and from 1:00 pm to 5:00 pm. No loading is authorized between noon and 1:00 pm. This is valid all year round. No loading on weekends. 2- For pick-up of a full truckload, please call our shipping/receiving department at x 258 (Iberville) or (St-Nicolas), 24 hours prior to the pick-up. This procedure helps us gather a portion of your order beforehand thus minimizing the loading time. 3- Because our products come in a wide variety of dimensions, we cannot guarantee that specific orders will ship complete regardless of their monetary value. 4- Soleno reserves the right to refuse loading, when a regulation of the Ministry of transportation is not respected or can compromise the security of its employees or that of the public safety on highways. A FEW PRACTICAL HINTS : 1- Flat bed vehicles must be equipped with posts and straps (tie downs) according to the Ministry of Transportation cargo securement regulations. 2- We recommend the use of a semi-trailer (dry box) or a flat bed equipped with 12 posts with a minimum height of 8' for a complete load of drain. 3- We recommend the use of a semi-trailer (dry box) or a flat bed equipped with 12 posts, with a height of 8' for a load of pipes that would be 18" in diameter or less and 6 meters in length mixed with drain coils. 4- We recommend the use of a flat bed equipped with 16 posts with a minimum height of 8' for a mixed load of pipes containing 4 meter lengths. 5- In order to maximize loading, Soleno will nest pipes of different diameters in a flat bed vehicle if it is equipped with a minimum of 2 security nets (one at each end of the load). 6- Contact our transport department at x 269 or x 383 for more information on the loading of your truck. Flat bed equipped with posts Flat bed without posts 94