Residential, Irrigation & Landscaping Product Catalog
|
|
|
- Madeline Baker
- 6 years ago
- Views:
Transcription
1 Residential, Irrigation & Landscaping Product Catalog The Most Advanced Name in Water Management Solutions TM
2
3 TABLE OF CONTENTS table of contents 1 PRODUCT APPLICATIONS Matrix of appropriate applications for all products... 2 PIPE Single Wall Characteristics... 2 Single Wall Pipe... 3 Bend-A-Drain TM Pipe... 4 Onsite and Sewer & Drain Pipe... 5 Dual Wall N FLARED END SECTIONS... 6 FITTINGS Single Wall INSERTA TEE FLEXSTORM INLET FILTERS NYLOPLAST DRAIN BASIN METER PITS FOUNDATION DRAINAGE & ACCESSORIES GEOSYNTHETICS PRESSURE PIPE ADVANEDGE PIPE & FITTINGS RESALE ITEMS ITEMS MARKED WITH ARE PRODUCTS OFFERED FOR SALE BUT NOT MANUFACTURED BY ADS. Standard and metric units are provided on products throughout the catalog. Unless stated otherwise, metric units should be used for reference purposes only. Products subject to change without notice. All sales of our product are subject to a limited warranty and purchasers are solely responsible for installation and use of our products and determining whether a product is suited for any specific needs. Please consult a full copy of ADS Terms and Conditions for Sale for further details.
4 2 applications PRODUCT APPLICATIONS APPLICATIONS HIGHWAY HEAVY DUTY SINGLE WALL BEND-A- DRAIN GRAVELLESS SMOOTH WALL/ TRIPLE WALL double WALL RESIDENTIAL PRODUCTS FOUNDATION/EDGE DRAINS DOWNSPOUTS/ROOF DRAINAGE CULVERTS SUB DRAINAGE ON-SITE WASTE MANAGEMENT N-12 SUGGESTED PRODUCTS AND APPLICATIONS ARE PROVIDED FOR GENERAL GUIDANCE ONLY. CONTACT An ADS REPRESENTATIVE TO DISCUSS THE PRODUCTS ACCEPTABLE FOR SPECIFIC APPLICATIONS. CHARACTERISTICS SINGLE WALL PIPE PRODUCT HIGHWAY PIPE HEAVY DUTY PIPE bend-a-drain PIPE GRAVELLESS PIPE SMOOTHWALL/ TRIPLE WALL PIPE DESCRIPTION Annular corrugated single wall Annular corrugated single wall Annular corrugated single wall Annular corrugated single wall wrapped in geotextile fabric with 5/8" holes Smooth white exterior and smooth black interior DIAMETER RANGE 3" 24" ( mm) 3" 24" ( mm) LENGTH 100' 3200' (30 960m) coil for 3" 6" ( mm) diameter pipe 20' (6m) for 8" 24" ( mm) diameter pipe 10' 20' (3 6m) sticks, 100' 5500' ( m) coils, depending on the diameter 4" (100 mm) 12' (3.6 m) or 25' (7.6) 8" (200 mm) 10" (250 mm) 3" (75 mm) 4" (100 mm) 6" (150 mm) 10' 20' (3 6m) CONNECTION Internal, external snap or split band couplers Internal, external snap or split band couplers 2' (.6 m) corrugated single wall coupler Split band or internal snap coupler SPECIFICATIONS/ PERFORMANCE 3" 10" ( mm): AASHTO M252 Type C 12" 24" ( mm): AASHTO M294 Type C 3" 6" ( mm): ASTM F405 8" 24" ( mm): ASTM F667 ASTM F667 10' (3m) Bell-and-spigot ASTM F810
5 SINGLE WALL PIPE HEAVY DUTY pipe Single Wall 3 3" 24" HEAVY DUTY SINGLE WALL INSIDE DIAMETER STANDARD LENGTHS STYLE 3" (75 mm) 4" (100 mm) 6" (150 mm) 8" (200 mm) 10" (200 mm) 12" (300 mm) 20' (6 m) 15" (375 mm) 20' (6 m) 18" (450 mm) 20' (6 m) 24" (600 mm) 20' (6 m) 10' (3 m) ' (30 m) Plain ' (91 m) ' (3 m) ' (30 m) Perf ' (91 m) ' (30 m) BS Perf/wrap 300' (91 m) BS 10' (3m ) ' (30 m) Plain ' (75 m) ' (3 m) ' (30 m) Perf ' (75 m) ' (30 m) BS Perf/wrap 250' (75 m) BS 10' (3 m) ' (6 m) Plain ' (30 m) ' (3 m) ' (6 m) Perf ' (30 m) ' (30 m) Perf/wrap BS 20' (6 m) Plain ' (6 m) Perf ' (6 m) Perf/wrap ' (6 m) Plain ' (6 m) Perf ' (6 m) Perf/wrap Plain Perf Plain Perf Plain Perf Plain Perf Ideal for drainage products where flexibility, light weight and low costs are important. HEAVY DUTY PIPE
6 4 PIPE Single Wall SINGLE WALL PIPE BEND-A-DRAIN PIPE BEND-A-DRAIN PIPE DIAMETER PACKAGE QUANTITY 4" x 12' (100 mm x 3.7 m) Solid Pipe " x 12' (100 mm x 3.7 m) Perforated Pipe " x 25' (100 mm x 7.6 m) Solid Pipe " x 25' (100 mm x 7.6 m) Perforated Pipe " x 25' (100 mm x 7.6 m) Perf. Sock Pipe BS 4" x 2' (100 mm x 0.6 m) Solid Connector Offers option of expanding pipe lengthwise and into unlimited angular adjustments, which will lock and remain in place once positioned. Can be utilized with above ground and below ground downspout drainage, low spot drainage and french drains.
7 SINGLE WALL PIPE smoothwall, triple wall pipe Single Wall 5 3", 4", 6" SMOOTHWALL PIPE DIAMETER 3" (75 mm) AVG. OUTSIDE DIAMETER 3.25" (83 mm) STANDARD LENGTHS 10' (3 m) 4" (100 mm) 4.215" (107 mm) 10' (3 m) 6" (150 mm) 6.275" (159 mm) 10' (3 m) STYLE INLINE Plain hole, SPIN ON BELL* Plain SP 2-hole, SP 3-hole, /8" SP 3-hole, /4" SP120 Plain hole, hole, *LIMITED GEOGRAPHIC AVAILABILITY. Contact your local sales representative for availability. A white HDPE layer around a black polyethylene core forms a light weight pipe for sidewalk culverts, turf drainage and onsite waste management systems. 3", 4" TRIPLEWALL DIAMETER AVG.OUTSIDE DIAMETER STANDARD LENGTHS STYLE 3" (75 mm) 3.25" (83 mm) 10' (3 m) Plain hole " (100 mm) 4.215" (107 mm) 10' (3 m) Plain hole hole *LIMITED GEOGRAPHIC AVAILABILITY. Contact your local sales representative for availability. A triple bonded polyethylene pipe with smooth inner and outer walls and a corrugated structural core. Designed to have superior pipe stiffness to that of PVC sewer and drain pipe.
8 6 Pipe Dual Wall Dual WALL PIPE N-12, Flared end sections 4" - 10" DUAL WALL PIPE OFFERINGS DIAMETER LENGTH STYLE 4" (100 mm) 6" (150 mm) 8" (200 mm) 10" (250 mm) 12" (300 mm) 15" (375 mm) 18" (450 mm) 24" (600 mm) 20' (6 m) 20' (6 m) 20' (6 m) 20' (6 m) 20' (6 m) 20' (6 m) 20' (6 m) 20' (6 m) solid perf solid perf solid perf solid perf solid perf solid perf solid perf solid perf DW DW DW DW DW DW DW DW DW DW DW DW DW DW DW DW Dual wall pipe has a smooth interior wall, a corrugated exterior and offers exceptional hydraulics and strength. N-12 provides superior corrosion and abrasion resistance. flared end sections SIZE 10" (250 mm) 1015NP 12" (300 mm)/15" (375 mm) 1215NP 18" (450 mm) 1810NP 24" (600 mm) 2410NP 30" (750 mm) 3015NP 36" (900 mm) 3615NP Minimizes washout potential and architecturally appealing entrance and exit from culverts.
9 COUPLERS INTERNAL SNAP, EXTERNAL SNAP & SPLIT BAND INTERNAL COUPLERS FITTINGS Single Wall 7 DIAMETER PACKAGE QUANTITY 3" (75 mm) AA 4" (100 mm) AA 4" (100 mm) ag AA 5" (125 mm) AA 6" (150 mm) AA 8" (200 mm) AA 10" (250 mm) AA INTERNAL COUPLER INTERNAL REDUCING COUPLERS SIZE PACKAGE QUANTITY 5" x 4" (125 x 100 mm) AA 6" x 5" (150 x 125 mm) AA INTERNAL REDUCING COUPLER EXTERNAL SNAP COUPLERS DIAMETER PACKAGE QUANTITY 3" (75 mm) AA 4" (100 mm) AA 5" (125 mm) AA 6" (150 mm) AA 8" (200 mm) AA 10" (250 mm) AA EXTERNAL SNAP COUPLER SPLIT COUPLERS DIAMETER PACKAGE QUANTITY 3" (75 mm) AA 4" (100 mm) AA 5" (125 mm) AA 6" (150 mm) AA 8" (200 mm) AA 10" (250 mm) AA 12" (300 mm) AA 15" (375 mm) AA 18" (450 mm) AA 24" (600 mm) AA SPLIT COUPLER
10 8 fittings Single Wall END CAPS & PLUGS SNAP END CAPS* DIAMETER PACKAGE QUANTITY TYPE SNAP SPLIT SNAP SPLIT 3" (75 mm) 30 Perf 0335AA 3" (75 mm) Solid 0332AA 0331AA 4" (100 mm) Solid 0432AA 0431AA 5" (125 mm) 24 Solid 0531AA 6" (150 mm) 12 Solid 0631AA 8" (200 mm) 6 Solid 0832AA 10" (250 mm) 6 Solid 1032AA 12" (300 mm) 4 Solid 1267AA 15" (375 mm) 1 Solid 1567AA 18" (450 mm) 1 Solid 1867AA 24" (600 mm) 1 Solid 2467AA *ADS END CAPS ARE FOR HORIZONTAL APPLICATIONS ONLY. ADS END CAPS ARE NOT PERMITTED TO BE USED IN ANY VERTICAL APPLICATIONS. MISUSE OR FAILURE TO PROPERLY SECURE END CAPS MAY RESULT IN DAMAGE TO PERSONS OR PROPERTY OR MAY RESULT IN INJURY OR DEATH. SNAP END CAP SPLIT END CAP 12" 24" SPLIT END CAP 3" 10" INTERNAL END PLUGS DIAMETER PACKAGE QUANTITY TYPE 3" (75 mm) 100 Solid 0333AA 4" (100 mm) 100 Solid Perforated 0433AA 0434AA 5" (125 mm) 100 Solid 0533AA 6" (150 mm) 50 Solid 0633AA INTERNAL END PLUG SOLID AND PERFORATED
11 ADAPTERS & DOWNSPOUT ADAPTERS ADAPTERS fittings Single Wall 9 DIAMETER PACKAGE QUANTITY TYPE 3" (75 mm) 24 Clay 0362AA 4" (100 mm) 24 Clay 0462AA 5" (125 mm) 24 Clay 0562AA 6" (150 mm) 11 Clay 0662AA 8" (200 mm) 9 Clay 0862AA 4" (100 mm) 24 Sewer & Drain 0467AA 4" (100 mm) 24 Septic Tank 0463AA Connects singlewall pipe to clay pipe and sewer & drain pipe. ADAPTER DOWNSPOUT ADAPTERS SIZE Downspout Dimensions x Pipe Diameter PACKAGE QUANTITY 3" x 2.25" x 2.5" (75 mm x 56 mm x 62.5 mm) AA 4" x 3.25" x 2.5" (100 mm x 81 mm x 62.5 mm) AA 4" x 4.25" x 3" (100 mm x 106 mm x 75 mm) AA 4" x 2.56" x 2.56" (100 mm x 63 mm x 63 mm) AA DOWNSPOUT ADAPTER Connects downspouts to singlewall pipe for downspout drainage. EXPANDABLE DOWNSPOUT ADAPTERS SIZE PACKAGE QUANTITY 2" x 3" (50 mm x 75 mm) AA 3" x 3" (75 mm x 75 mm) AA Adapter comes in 8½ compressed length and expands to 16. Bends from 45 to 90 angles. Angles around landscaping and easily bent to move for mowing.
12 10 fittings Single Wall REDUCERS & ELBOWS REDUCERS* SIZE (Main x Stub) PACKAGE QUANTITY 4" x 3" (100 mm x 75 mm) AA 5" x 4" (125 mm x 100 mm) AA 5" x 4" (125 mm x 100 mm) AA 6" x 4" (150 mm x 100 mm) AA 6" x 5" (150 mm x 125 mm) AA 8" x 6" (200 mm x 150 mm) AA 10" x 8" (250 mm x 200 mm) AA 12" x 10" (300 mm x 250 mm) AA SNAP REDUCING COUPLER *COUPLERS SOLD SEPARATELY 90 DEGREE SNAP ELBOWS SIZE PACKAGE QUANTITY 3" (75 mm) AA 4" (100 mm) AA 90 SNAP ELBOW 45 DEGREE SNAP ELBOWS SIZE PACKAGE QUANTITY 4" (100 mm) AA 45 SNAP ELBOW inserta tee* size 2" (50 mm) IPS/SCH 40 into 8" (200 mm) corrugated HDPE pipe 2IPS8N12 2" (50 mm) IPS/SCH 40 into 10" (250 mm) corrugated HDPE pipe 2IPS10N12 2" (50 mm) IPS/SCH 40 into 12" (300 mm) corrugated HDPE pipe 2IPS12N12 2" (50 mm) IPS/SCH 40 into 8" (200 mm) SDR35 2IPS8P35 4" (100 mm) IPS/SCH 40 into 8" (200 mm) corrugated HDPE pipe 4IPSFB8N12 4" (100 mm) IPS/SCH 40 into 10" (250 mm) corrugated HDPE pipe 4IPSFB10N12 4" (100 mm) IPS/SCH 40 into 12" (300 mm) corrugated HDPE pipe 4IPSFB12N12 4" (100 mm) SDR 26 into 8" (200 mm) corrugated HDPE pipe 4P26FB8N12 4" (100 mm) SDR 26 into 10" (250 mm) corrugated HDPE pipe 4P26FB10N12 4" (100 mm) SDR 26 into 12" (300 mm) corrugated HDPE pipe 4P26FB12N12 4" (100 mm) SDR 26 into 18" (450 mm) corrugated HDPE pipe 4P26FB18N12 4" (100 mm) SDR 26 into 8" (200 mm) SDR 35 4P26FB8P35 4" (100 mm) SDR 26 into 12" (200 mm) SDR 35 4P26FB12P35 4" (100 mm) corrugated HDPE into 10" (200 mm) corrugated HDPE 4N1210N12 4" (100 mm) corrugated HDPE into 12" (250 mm) corrugated HDPE 4N1212N12 4" (100 mm) corrugated HDPE into 18" (450 mm) corrugated HDPE 4N1218N12 * Sizes for 6"-30" are also available. Compression fits into the cored wall of a mainline and requires no special tools. 2" INSERTA TEE 4" SDR 35 4" corrugated hdpe
13 TEES BLIND, SNAP, REDUCING & BLIND MULTIPLE BLIND TEES fittings Single Wall 11 SIZE PACKAGE QUANTITY 3" (75 mm) AA 4" (100 mm) AA 5" (125 mm) AA 6" (150 mm) AA 8" (200 mm) AA 10" (250 mm) AA BLIND TEE SNAP TEES SIZE PACKAGE QUANTITY 3" (75 mm) AA 4" (100 mm) AA 5" (125 mm) AA 6" (150 mm) AA SNAP TEE 4"- 60" 45 DEGREE ELBOWS HINGED TEE* SIZE PACKAGE QUANTITY 4" (100 mm) AAHF *Fits singlewall and dual-wall pipe. HINGED TEE Hinged corrugated tee fits on 4 singlewall pipe and N-12 dual wall pipe. Hinged corrugated tee will fasten securely to pipe and allow for ease of use in the field. REDUCING TEES SIZE (Main x Stub) PACKAGE QUANTITY 5" x 3" (125 mm x 75 mm) Red. Tee AA 5" x 4" (125 mm x 100 mm) Red. Tee AA 6" x 5" (150 mm x 125 mm) Red. Tee AA REDUCING TEE BLIND MULTIPLE TEES SIZE (Main x Stub) PACKAGE QUANTITY 8" x 8"/6"/4" (200 mm/150 mm/100 mm) AA 10" x 10"/8" (250 mm/200 mm) AA 12" x 12"/10" (300 mm/250 mm) AA 15" x 10" (375 mm/250 mm) AA 18" x 12" (450 mm/300 mm) AA BLIND MULTIPLE TEE
14 12 fittings Single Wall TEES & WYES MULTIPLE, MULTIPLE CROSS & INTERNAL TAP TEES MULTIPLE TEES SIZE (Main x Stub) PACKAGE QUANTITY 5" x 5" x 5"/4" (125mm x 125 x 125/100 mm) AA 6" x 3"/4"/5"/6" (150mm x 75/100/125/150 mm) 8" x 4"/5"/6"/8" (200mm x 100/125/150/200 mm) 10" x 6"/8"/10" (250mm x 150/200/250 mm) AA AA AA MULTIPLE TEE MULTIPLE CROSS TEES SIZE PACKAGE QUANTITY 6" (150 mm) AA MULTIPLE CROSS TEE INTERNAL TAP TEES SIZE PACKAGE QUANTITY 3" x 6"/8" (75 mm x 150 mm/200 mm) AA 4" x 6"/8" (100 mm x 150 mm/200 mm) AA 4" x 6"/8" (100 mm x 150 mm/200 mm) AA 4" x 10"/12" (100 mm x 250 mm/300 mm) AA 4" x 10"/12" (100 mm x 250 mm/300 mm) AA TAP TEE WYES SIZE (Size on Size) PACKAGE QUANTITY 3" (75 mm) AA 4" (100 mm) AA 5" (125 mm) AA 6" (150 mm) AA 8" (200 mm) AA WYE
15 flexstorm filters & drain basin catch-it (TEMPORARY) INLET FILTERS 13 SIZE PACKAGE QUANTITY PRODUCT CODE 18" x 18" (450 mm x 450 mm) square 1 62SSQFX 24" x 24" (600 mm x 600 mm) square 1 62MSQFX 12" (300 mm) round NYFX 18" (450 mm) round NYFX 24" (600 mm) round NYFX The FLEXSTORM CATCH-IT system is a temporary inlet protection filter and storm water runoff control. Filter includes a bypass protection to prevent jobsite ponding. Units install in 30 seconds and may be used for landscape construction, roads, parking lots, floor drains, maintenance and residential development. pure (permanent) SIZE PACKAGE QUANTITY PRODUCT CODE 24" x 24" (600 mm x 600 mm) square 1 62MHDPCP 24" x 24" (600 mm x 600 mm) square 1 62MHDRPCP 24" x 24" (600 mm x 600 mm) square 1 62MHDFX 24" (600 mm) round 1 62MHDFXP The FLEXSTORM PURE system is a permanent inlet protection and storm water runoff control filter. PURE inlet filters fit any drainage structure and are available with site-specific filter bags providing various filtration levels. May be utilized in car washes, loading ramps, landscapes, parking lots, dock drains, maintenance and industrial. OPEN THROAT CURB INLET SIZE PACKAGE QUANTITY PRODUCT CODE Small up to 48" (1200 mm) 1 62HDWM1FX Medium between 48"-96" ( mm) 1 62HDWM2FX FX: woven bag at 82% filtration efficiency for construction sediment load PC: woven with Adsorb-it line targeting small particle and hydrocarbon removal FX+ and PC+ bags include ClearTec skimmer pouches for additional hydrocarbon removal capabilities nyloplast Drain Basin SIZE PACKAGE QUANTITY PRODUCT CODE 8" (200 mm) Diameter Drain Basin AG01HD 12" (300 mm) Diameter Drain Basin AG01HD
16 14 meter pits & Foundation Drainage METER PITS METER PITS* I.D. x LENGTH *LIMITED GEOGRAPHIC AVAILABILITY. 18" x 24" (450 mm x 600 mm) 1805ACH 18" x 30" (450 mm x 750 mm) 1805AAH 18" x 36" (450 mm x 900 mm) 1805ABH 18" x 42" (450 mm x 1050 mm) 1805ADH 18" x 48" (450 mm x 1200 mm) 1805AEH 21" x 24" (525 mm x 600 mm) 2105ACH 21" x 30" (525 mm x 750 mm) 2105AAH 21" x 36" (525 mm x 900 mm) 2105ABH 21" x 48" (525 mm x 1200 mm) 2105AEH 24" x 24" (600 mm x 600 mm) 2405ACH 24" x 30" (600 mm x 750 mm) 2405AAH 24" x 36" (600 mm x 900 mm) 2405ABH 24" x 42" (600 mm x 1050 mm) 2405ADH 24" x 48" (600 mm x 1200 mm) 2405AEH 18" x 12' (450 mm x 3.5 m) (UNCUT SECTION) H 21" x 12' (525 mm x 3.5 m) (UNCUT SECTION) H 24" x 12' (600 mm x 3.5 m) (UNCUT SECTION) H All meter pits are white and notched. Uncut sections do not have notches. FOUNDATION DRAINAGE & ACCESSORIES METER PITS FOUNDATION DRAINAGE PRODUCTS DESCRIPTION DIMENSIONS 24" Sump Liner Locking 18" diameter x 24" height 1524ADL 30" Sump Liner Locking 18" diameter x 30" height 1530ADL HD Sump Lid 5/Bag 18" diameter 1537AD Locking Sump Lid 5/Bag 18" diameter 1537ADL ADS Radon Vented Sump Lid 18" diameter 1538AD Sump Pump & NOTCHED Lid RADON DUAL PURPOSE VENTED SUMP AND LID
17 GEOSYNTHETICS GEOSYNTHETICS 15 NONWOVEN GEOTEXTILES Weight W x L Product CODE 3 oz. (85 g) 150" x 360' (3.8 m x 110 m) 0311TG 3 oz. (85 g) 180" x 360' (4.6 m x 110 m) 0311TS 3.5 oz. (100 g) 24" x 360' (.6 m x 110 m) 0351TC 3.5 oz. (100 g) 36" x 3600' (.9 m x 110 m) 0351TA 3.5 oz. (100 g) 48" x 360' (1.2 m x 110 m) 0351TB 3.5 oz. (100 g) 90" x 360' (2.3 m x 110 m) 0351TT 3.5 oz. (100 g) 150" x 360' (3.8 m x 110 m) 0351TG 3.5 oz. (100 g) 180" x 360' (4.6 m x 110 m) 0351TS 4 oz. (113 g) 90" x 360' (2.3 m x 110 m) 0401TT 4 oz. (113 g) 150" x 360' (3.8 m x 110 m) 0401TG 4 oz. (113 g) 180" x 360' (4.6 m x 110 m) 0401TS 4.5 oz. (128 g) 150" x 360' (3.8 m x 110 m) 0451TG 4.5 oz. (128 g) 180" x 360' (4.6 m x 110 m) 0451TS 6 oz. (170 g) 150" x 360' (3.8 m x 110 m) 0601TG 6 oz. (170 g) 180" x 360' (4.6 m x 110 m) 0601TS 7 oz. (198 g) 72" x 360' (1.8 m x 110 m) 0701TE 7 oz. (198 g) 150" x 360' (3.8 m x 110 m) 0701TG 7 oz. (198 g) 180" x 300' (4.6 m x 91 m) 0701TS 8 oz. (227 g) 150" x 360' (3.8 m x 110 m) 0801TG 8 oz. (227 g) 180" x 300' (4.6 m x 91 m) 0801TS Nonwoven filter soil particles from drainage systems. Can be utilized for subsurface drainage, roadway separation, railroad stabilization, hard armor underlayment and underground retention/detention systems. WOVEN GEOTEXTILES GRAB W x L Product CODE " x 432' (3.8 m x 132 m) 200WTK " X 360' (4.6 m x 110 m) 200WTS " x 300' (5.3 m x 91 m) 200WTM " x 360' (3.8 m x 110 m) 315WTK " x 257' (5.3 m x 78 m) 315 WTM " x 300' (4.6 m x 91 m) 315WTS Manufactured from extruded polypropylene monofilaments to form a stable construction fabric. Woven fabrics are used primarily for hard armor underlayment, subsurface drainage and landfill leachate collection. GEOGRIDS W x L 13.1' X 246' (4 m x 75 m) 13.1' X 164' (4 m x 50 m) 13.1' X 164' (4 m x 50 m) 13.1' X 246' (4 m x 75 m) Product CODE BX114GG BX124GG BX134GG BX144GG Geogrids reinforce soil and their high tensile strength makes them ideal for base reinforcement and soft soil stabilization.
18 16 pressure pipe ADS PolyFlex Potable Grade Pipe SIDR 19 (100 psi) PE4710 SIZE Coil Length Max. Allowable Pressure at 73 F ¾" (19 mm) X ' (30 m) 100 psi (690 kpa) ¾" (19 mm) X ' (90 m) 100 psi (690 kpa) ¾" (19 mm) X ' (150 m) 100 psi (690 kpa) 1" (25 mm) X ' (30 m) 100 psi (690 kpa) 1" (25 mm) X ' (90 m) 100 psi (690 kpa) 1" (25 mm) X ' (150 m) 100 psi (690 kpa) 1¼" (32 mm) X ' (30 m) 100 psi (690 kpa) 1¼" (32 mm) X ' (90 m) 100 psi (690 kpa) 1½" (38 mm) X ' (30 m) 100 psi (690 kpa) 1½" (38 mm) X ' (90 m) 100 psi (690 kpa) 2" (50 mm) X ' (30 m) 100 psi (690 kpa) 2" (50 mm) X ' (90 m) 100 psi (690 kpa) SIDR 15 (125 psi) PE4710 SIZE Coil Length Max. Allowable Pressure at 73 F ½" (13 mm) X ' (30 m) 125 psi (862 kpa) ½" (13 mm) X ' (90 m) 125 psi (862 kpa) ½" (13 mm) X ' (120 m) 125 psi (862 kpa) ¾" (19 mm) X ' (30 m) 125 psi (862 kpa) SIDR 11.5 (160 psi) PE4710 SIZE Coil Length Max. Allowable Pressure at 73 F ¾" (19 mm) X ' (30 m) 160 psi (1103 kpa) ¾" (19 mm) X ' (90 m) 160 psi (1103 kpa) ¾" (19 mm) X ' (150 m) 160 psi (1103 kpa) 1" (25 mm) X ' (30 m) 160 psi (1103 kpa) 1" (25 mm) X ' (90 m) 160 psi (1103 kpa) 1" (25 mm) X ' (150 m) 160 psi (1103 kpa) 1¼" (32 mm) X ' (30 m) 160 psi (1103 kpa) 1¼" (32 mm) X ' (90 m) 160 psi (1103 kpa) 1½" (38 mm) X ' (30 m) 160 psi (1103 kpa) 1½" (38 mm) X ' (90 m) 160 psi (1103 kpa) 2" (50 mm) X ' (30 m) 160 psi (1103 kpa) 2" (50 mm) X ' (90 m) 160 psi (1103 kpa) ADS PolyFlex pipe is strong and resistant to many common causes of damage such as vibrations, surface loads and pressure surges. Can be used on landscape and agricultural irrigation systems, residential and commercial water service pipe, well/pump water systems and slurry pipelines. Other coil lengths and pressure ratings may be available. please contact your local ads rep for more details.
19 ADS PolyFlex Potable Grade Pipe SIDR 9 (200 psi) PE4710 pressure pipe 17 SIZE Coil Length Max. Allowable Pressure at 73 F ¾" (19 mm) X ' (30 m) 200 psi (1380 kpa) ¾" (19 mm) X ' (90 m) 200 psi (1380 kpa) ¾" (19 mm) X ' (150 m) 200 psi (1380 kpa) 1" (25 mm) X ' (30 m) 200 psi (1380 kpa) 1" (25 mm) X ' (90 m) 200 psi (1380 kpa) 1" (25 mm) X ' (150 m) 200 psi (1380 kpa) 1¼" (32 mm) X ' (30 m) 200 psi (1380 kpa) 1¼" (32 mm) X ' (90 m) 200 psi (1380 kpa) 1½" (38 mm) X ' (30 m) 200 psi (1380 kpa) 1½" (38 mm) X ' (90 m) 200 psi (1380 kpa) 2" (50 mm) X ' (30 m) 200 psi (1380 kpa) 2" (50 mm) X ' (90 m) 200 psi (1380 kpa) SIDR 7 (250 psi) PE4710 SIZE Coil Length Max. Allowable Pressure at 73 F ¾" (19 mm) X ' (30 m) 250 psi (1724 kpa) ¾" (19 mm) X ' (90 m) 250 psi (1724 kpa) ¾" (19 mm) X ' (150 m) 250 psi (1724 kpa) 1" (25 mm) X ' (30 m) 250 psi (1724 kpa) 1" (25 mm) X ' (90 m) 250 psi (1724 kpa) 1" (25 mm) X ' (150 m) 250 psi (1724 kpa) 1¼" (32 mm) X ' (30 m) 250 psi (1724 kpa) 1¼" (32 mm) X ' (90 m) 250 psi (1724 kpa) 1½" (38 mm) X ' (30 m) 250 psi (1724 kpa) 1½" (38 mm) X ' (90 m) 250 psi (1724 kpa) 2" (50 mm) X ' (30 m) 250 psi (1724 kpa) 2" (50 mm) X ' (90 m) 250 psi (1724 kpa) ADS PolyFlex pipe is strong and resistant to many common causes of damage such as vibrations, surface loads and pressure surges. Can be used on landscape and agricultural irrigation systems, residential and commercial water service pipe, well/pump water systems and slurry pipelines. Other coil lengths and pressure ratings may be available. please contact your local ads rep for more details.
20 18 pressure pipe ADS PolyFlex non-potable Grade Pipe 80 psi SIZE Coil Length Max. Allowable Pressure at 73 F ½" (13 mm) ' (30 m) 80 psi (550 kpa) ¾" (19 mm) ' (30 m) 80 psi (550 kpa) ¾" (19 mm) ' (90 m) 80 psi (550 kpa) 1" (25 mm) ' (30 m) 80 psi (550 kpa) 1" (25 mm) ' (90 m) 80 psi (550 kpa) 1¼" (32 mm) ' (30 m) 80 psi (550 kpa) 1¼" (32 mm) ' (90 m) 80 psi (550 kpa) 1½" (38 mm) ' (30 m) 80 psi (550 kpa) 1½" (38 mm) ' (90 m) 80 psi (550 kpa) 2" (50 mm) ' (30 m) 80 psi (550 kpa) 2" (50 mm) ' (90 m) 80 psi (550 kpa) 100 psi SIZE Coil Length Max. Allowable Pressure at 73 F ½" (13 mm) ' (30 m) 100 psi (690 kpa) ½" (13 mm) ' (90 m) 100 psi (690 kpa) ¾" (19 mm) ' (30 m) 100 psi (690 kpa) ¾" (19 mm) ' (90 m) 100 psi (690 kpa) 1" (25 mm) ' (30 m) 100 psi (690 kpa) 1" (25 mm) ' (90 m) 100 psi (690 kpa) 1¼" (32 mm) ' (30 m) 100 psi (690 kpa) 1¼" (32 mm) ' (90 m) 100 psi (690 kpa) 1½" (38 mm) ' (30 m) 100 psi (690 kpa) 1½" (38 mm) ' (90 m) 100 psi (690 kpa) 2" (50 mm) ' (30 m) 100 psi (690 kpa) 2" (50 mm) ' (90 m) 100 psi (690 kpa) (125 psi) SIZE Coil Length Max. Allowable Pressure at 73 F ½" (25 mm) ' (30 m) 125 psi (860 kpa) ADS PolyFlex pipe is strong and resistant to many common causes of damage such as vibrations, surface loads and pressure surges. Utility grade pipe may be utilized for agricultural, landscape irrigation systems, slurry pipelines and home and commercial usage. Other coil lengths and pressure ratings may be available. please contact your local ads rep for more details.
21 ADS PolyFlex Water Service line (CtS) SDR 9 (250 psi) PE4710 (Blue) PRESSURE PIPE 19 SIZE Coil Length Max. Allowable Pressure at 73 F ¾" (19 mm) X ' (30 m) 250 psi (1724 kpa) ¾" (19 mm) X ' (90 m) 250 psi (1724 kpa) ¾" (19 mm) X ' (300 m) 250 psi (1724 kpa) 1" (25 mm) X ' (30 m) 250 psi (1724 kpa) 1" (25 mm) X ' (90 m) 250 psi (1724 kpa) 1" (25 mm) X ' (150 m) 250 psi (1724 kpa) 1" (25 mm) X ' (300 m) 250 psi (1724 kpa) 1¼" (32 mm) X ' (30 m) 250 psi (1724 kpa) 1¼" (32 mm) X ' (90 m) 250 psi (1724 kpa) 1¼" (32 mm) X ' (150 m) 250 psi (1724 kpa) 1½" (38 mm) X ' (30 m) 250 psi (1724 kpa) 1½" (38 mm) X ' (150 m) 250 psi (1724 kpa) 2" (50 mm) X ' (30 m) 250 psi (1724 kpa) 2" (50 mm) X ' (90 m) 250 psi (1724 kpa) 2" (50 mm) X ' (150 m) 250 psi (1724 kpa) SDR 9 (250 psi) PE4710 (BlACK) SIZE Coil Length Max. Allowable Pressure at 73 F ¾" (19 mm) X B 100' (30 m) 250 psi (1724 kpa) ¾" (19 mm) X B 300' (90 m) 250 psi (1724 kpa) ¾" (19 mm) X B 500' (150 m) 250 psi (1724 kpa) ¾" (19 mm) X B 1000' (300 m) 250 psi (1724 kpa) 1" (25 mm) X B 100' (30 m) 250 psi (1724 kpa) 1" (25 mm) X B 300' (90 m) 250 psi (1724 kpa) 1" (25 mm) X B 500' (150 m) 250 psi (1724 kpa) 1" (25 mm) X B 1000' (300 m) 250 psi (1724 kpa) 1¼" (32 mm) X B 100' (30 m) 250 psi (1724 kpa) 1¼" (32 mm) X B 300' (90 m) 250 psi (1724 kpa) 1¼" (32 mm) X B 500' (150 m) 250 psi (1724 kpa) 1½" (38 mm) X B 100' (30 m) 250 psi (1724 kpa) 1½" (38 mm) X B 300' (90 m) 250 psi (1724 kpa) 1½" (38 mm) X B 500' (150 m) 250 psi (1724 kpa) 2" (50 mm) X B 100' (30 m) 250 psi (1724 kpa) 2" (50 mm) X B 300' (90 m) 250 psi (1724 kpa) 2" (50 mm) X B 500' (150 m) 250 psi (1724 kpa) ADS CTS pipe may be used on residential and commercial water service, well/pump water systems, municipal service lines and farm and ranch water systems. Other coil lengths and pressure ratings may be available. please contact your local ads rep for more details.
22 20 Advanedge 12" AND 18" ADVANEDGE PIPE DIAMETER LENGTH DESCRIPTION 12" (300 mm) 18" (450 mm) ADVANEDGE PIPE & FITTINGS 100' (30.5 m) No Fabric ' (30.5 m) 3.5 oz. (99 g) Typar Fabric ' (30.5 m) 4.0 oz. (113 g) Typar Fabric ' (121.9 m) 4.0 oz. (113 g) Typar Fabric ' (34.1 m) 4.0 oz. (113 g) Typar Fabric ' (30.5 m) Knitted Polyester Sock ' (30.5 m) 4.0 oz. (113 g) Amoco Fabric (Grey) ' (30.5 m) No Fabric ' (30.5 m) 4.0 oz. (113 g) Fabric ' (487.7 m) 4.0 oz. (113 g) Fabric ' (30.5 m) 4.0 oz. (113 g) Needlepunched Fabric Panel-shaped AdvanEDGE HDPE pipe is utilized for building foundation drainage, golf courses, athletic fields, airport runways and perimeter curtain drains. ADVANEDGE FITTINGS PIPE SIZE FITTING 12" (300 mm) 1432AA Snap End Cap 18" (450 mm) 1632AA 12" (300 mm) 1411AA External Split Coupler 18" (450 mm) 1611AA 12" (300 mm) Wye 1480AA 12" (300 mm) and 18" (450 mm) Coupling Pin (2/pk) 0840MB 12" (300 mm) 1472AA End Outlet 18" (450 mm) 1672AA 12" (300 mm) 1471AA Side Outlet 18" (450 mm) 1671AA 4" (100 mm) 12" (300 mm) Flat Outlet 1432AN 12" (300 mm) 1460AN Fabricated Tee 18" (450 mm) 1660AN 12" (300 mm) 1460ANH Fabricated Tee (Horizontal) 18" (450 mm) 1660ANH 12" (300 mm) Fabricated Tee with Side Outlet 1464ANH 12" (300 mm) Fabricated Tee with Perf Side Outlet 1464ANH81 12" (300 mm) Fabricated Cross Tee (Horizontal) 1436ANH 12" (300 mm) 1480AN Fabricated Wye 18" (450 mm) 1680AN 12" (300 mm) 1480ANH Fabricated Wye (Horizontal) 18" (450 mm) 1680ANH 12" (300 mm) Fabricated Cross Wye 1438ANH END CAP COUPLING PIN END OUTLET FLAT OUTLET EXTERNAL SPLIT COUPLERS WYE SIDE OUTLET
23
24 ADS Terms and Conditions of Sale are available on the ADS website, pipe.com The ADS logo, the Green Stripe, N-12, Bend-A-Drain TM, PolyFlex TM, and AdvanEDGE are registered trademarks of Advanced Drainage Systems, Inc. FLEXSTORM is a registered trademark of Inlet & Pipe Protection, Inc. Nyloplast is a registered trademark of Nyloplast. INSERTA TEE is a registered trademark of Inserta Fittings Co Advanced Drainage Systems, Inc. # /16 MH Advanced Drainage Systems, Inc Trueman Blvd. Hilliard, OH The Most Advanced Name in Water Management Solutions TM
water management product catalog
water management product catalog INTRODUCTON Our Thinking Continues to Make Waves. From construction and agriculture to residential and recreation, Hancor offers innovative drainage solutions for a variety
Small Diameter N-12 Pipe and Fittings
Small Diameter N-12 Pipe and Fittings THE IN WATER MANAGEMENT TheMOST MostADVANCED AdvancedNAME Name in Drainage SystemsSOLUTIONS SMALL DIAMETER N-12 PIPE AND FITTINGS ADS offers a line of 4-12 (100-300
HP Sanitary Sewer Pipe 12 60
SaniTite HP Sanitary Sewer Pipe 12 60 The Most Advanced Name in Water Management Solutions TM Sanitite HP pipe 12 60 FOR SANITARY SEWER Meets ASTM F2764* SaniTite HP (High Performance) couples advanced
Flexible Couplings & Saddles
Revised 6/01 Flexible Sewer couplings are the result of many years of experience with sewer pipe connections. Today's couplings are made of specially formulated elastomeric PVC with high tear and shear
PVC WELL CASING & FITTINGS 20 FT. BELL-END /8 SDR21 REDUCING COUPLINGS STEEL WELL CASING & FITTINGS
Pipe Pipe & Well Casing FT. BELL-END 0 7 293 2 2 29 27 23 " SCH0 -/2" SDR7 " SDR2 " SCH0 " SCH0 FT. BELL-END 37 32 30 29 2 " SCH0 -/2" SDR7 -/" DR27. PVC WELL CASING & FITTINGS FT. BELL-END 003 7 -/ SDR2
Macon Plastics, Inc Fax
Macon Plastics, Inc. 888.782.2722 478.743.6828 Fax 478.743.6819 Surface Drainage Products Catalog The Starting Point for your Storm Water Drainage Solutions! Drain Basins, Inline Drains, Curb Inlets, Road
Compression Fittings & Valves. Make the connection
Compression Fittings & Valves Make the connection Make the Connection with Compression Fittings, Valves, and Municipal Stops Make the connection with Philmac fittings. The versatile Philmac fitting system
INNOVATIVE DRAINAGE AND WATER CONSERVATION SOLUTIONS WATER MANAGEMENT PRODUCT CATALOG
INNOVATIVE DRAINAGE AND WATER CONSERVATION SOLUTIONS WATER MANAGEMENT PRODUCT CATALOG INTRODUCTION OUR THINKING CONTINUES TO MAKE WAVES. From construction and agriculture to residential and recreation,
Project Book Worksheet for Cost Estimation
001.01 MOBILIZATION LS $34,716.18 007 3/17/2039 001.02 INCIDENTAL LS $23,929.43 019 3/17/2039 001.03 CONSTRUCTION STAKING LS $10,504.39 201 5/9/2013 001.04 REESTABLISH PROPERTY CORNERS EA $496.08 201 5/9/2013
ABOUT NORTH AMERICAN PIPE CORPORATION
Molded PVC Fittings TABLE OF CONTENTS D-SERIES: SOLVENT WELD DWV FITTINGS CERTS: ASTM D2665, F1866, F2135, CSA B181.2, UPC, NSF... 1-5 G-SERIES: GASKETED SDR 35 SEWER FITTINGS CERTS: ASTM D3034, ASTM
SITE PLANS ASSISTED LIVING REDEVELOPMENT
SITE PLANS ASSISTED LIVING REDEVELOPMENT PROJECT SUMMARY TOTAL LOT AREA - 39.0 ACRES EXISTING BUILDING FOOTPRINT 48,060 S.F. PROPOSED 25,869 S.F. TOTAL BUILDING FOOTPRINT 73,929 S.F. ZONING COMPLIANCE
Compression Fittings & Valves. Make the connection
Compression Fittings & Valves Make the connection Make the Connection with Compression Fittings, Valves, and Municipal Stops Make the connection with Philmac fittings. The versatile Philmac fitting system
High-Strength Steel Reinforced HDPE Pipe. For pipe specifications, please visit:
Kanaflex Steel Reinforced Pipe (SRPE) Kanapipe for Storm and Sanitary Sewer Applications-12"-72" Kanaflex Steel Reinforced Pipe (SRPE) is the sound solution for storm drainage, combined sewer overflow,
Twin Wall Ducting. System s. Cable Protection Systems. Pioneers in PE Pipe Technologies. Systems
2011 Twin Wall Ducting Systems Cable Protection Systems System s Pioneers in PE Pipe Technologies Index Electricity and Power Twin Wall p.4 General Utilities Twin Wall p.8 Motorway Communications Twin
METAL PRESSURE PIPE PIPE & TUBING PIPE & TUBING GALVANIZED PRESSURE PIPE ASTM A-53 ERW BLACK GAS PIPE ASTM A-53 ABOVE GROUND LARSEN SUPPLY CO., INC.
METAL PRESSURE PIPE GALVANIZED PRESSURE PIPE ASTM A-53 ERW 27-0100 B 1/8 700 Max work PSI Schedule 40 21 1 27-0200 B 1/4 700 Max work PSI Schedule 40 21 1 27-0300 B 3/8 700 Max work PSI Schedule 40 21
THE GLOBAL LEADER IN PIPE PLUG & TESTING
THE GLOBAL LEADER IN PIPE PLUG & TESTING PNEUMATIC PLUGS MECHANICAL PLUGS GAUGES TOOLS & ACCESSORIES TESTING EQUIPMENT 2 Oatey.com/Cherne TEST WITH THE BEST CHERNE TABLE OF CONTENTS PNEUMATIC PLUGS BLOCKING
HDPE piping systems offer many benefits when compared to most other materials; which typically include the following:
Rare Plastics manufacture and distribute HPE pipe & fittings from our factory in Meyerton, Gauteng. Pipes are manufactured to SANS ISO 4427 standards and sizes range from 110 to 1000. The PE100 raw material
PVC Pressure Piping Systems for Water Transmission
PVC Pressure Piping Systems for Water Transmission MUNICIPAL SYSTEMS PVC PRESSURE PIPING SYSTEM MANUFACTURED TO AWWA & CSA STANDARDS IPEX Centurion 14" 60" (350mm 1,500mm), AWWA C905 and CSA Standards
Draincoil. Features & Benefits. Draincoil corrugated drainage pipe is of a consistent high quality and comes in a broad range of sizes and grades.
Draincoil corrugated drainage pipe is of a consistent high quality and comes in a broad range of sizes and grades. It is available slotted or unslotted, with or without filter sock. There is a full range
Hydraulics Guide. Table 1: Conveyance Factors (English Units)... 7 Table 2: Conveyance Factors (Metric Units)... 8
Table of Contents 1.1 Index of Tables... 1 1.2 Index of Figures... 1 1.3 Overview of Hydraulic Considerations... 2 1.4 Discharge Curves... 2 1.5 Conveyance Method... 5 1.6 Flow Velocity Considerations...
INNOVATIVE New Generation of Backwater Valves TECHNOLOGY. Fullport Backwater Valve NEW. Access Box Model # PE 2013
WINNER 2005 NEW Access Box Model # PE 2013 Fullport Backwater Valve INNOVATIVE New Generation of Backwater Valves Clear transparent lid provides easy visual inspection Built-in sewer clean-out Model #
Section One. Steel Underground. PVC Accessories Bolt-on Dresser Fittings Solvent PVC Pipe Fittings Gasketed PVC Pipe Fittings
Page Steel Underground Section One Powder Coated Steel Fittings Galvanized Steel Fittings PVC Fittings Riser Valves Clampon Saddles, Couplers, Male Ends Repair Couplers PVC Accessories Bolton Dresser Fittings
UnitedPolySystems.com
HIGH DENSITY POLYETHYLENE PIPE from ¾ to 16 in both IPS (iron pipe size) and DIPS (ductile iron pipe size) UnitedPolySystems.com Conduit Material Specifications Applications include: Telecom, Energy, DOT,
B E C K E R & F R O N D O R F Construction Cost Consulting Project Management
Project: Okehocking Nature Center Number: 07142E2 Client: M2 Architecture Date: June 5, 2009 Phase: DD B E C K E R & F R O N D O R F Construction Cost Consulting Project Management ESTIMATE SUMMARY CODE
H /J /K Series Standard Duty PVC Suction Hose
H /J /K Series Duty PVC Suction Hose Agricultural liquid fertilizer Air seeder lines Drain lines Irrigation lines Mining applications (MSHA) Rock dusting Water suction standard duty Construction: PVC tube
P Series. Price List Effective February 11, 2008
rice List Effective February 11, 2008 VC Solvent Weld Third party tested and listed by NSF, UC and CSA to meet ITEM IN INCHES SIZE NUMBER ART BOX QTY CRATE QTY RICE LIST Solvent Weld Sewer Fittings ITEM
DWV PVC DWV Drain Waste Vent Fittings
STANDARDS & SPECIFICATIONS Standards provide greater assurance of product performance and consistency, and are available to assist design engineers in system specification. The most frequently referenced
Aeroquip. Aluminum Compression Crimp Fittings
Aeroquip Aluminum Compression Crimp Fittings Table of Contents 666/667 Medium Pressure PTFE Hose and Aluminum Compression Crimp Fittings... 2 Aluminum Crimp Fittings... 3 Flared Fittings... 4 Flared Fitting
CITY OF STANDARD SPECIFICATIONS
CITY OF Published May 4, 2016 CALIFORNIA Stephan Kiefer, Community Development Director Cheri Sheets, City Engineer CITY OF LIVERMORE 1052 South Livermore Avenue Livermore, CA 94550 4DEV0001.doc 03/12
Service Materials. Service Materials. With Three Locations to Serve You: Avoca, NY 8125 Kanona Rd. Avoca, NY (607)
Service Materials Service Materials Rochester, NY 785 Beahan Rd. Rochester, NY 14624 (585) 436-9624 With Three Locations to Serve You: Avoca, NY 8125 Kanona Rd. Avoca, NY 14809 (607) 566-2214 Watertown,
Plugs & Test Equipment for Piping Systems
Plugs & Test Equipment for Piping Systems Product Catalog CHERNE INDUSTRIES INC. Cherne Industries Best in the Business From Humble Beginnings to an Industry Standard In 1953, Cherne Industries created
innerduct Innerduct INNERDUCT tidbit
innerduct Innerduct Innerduct is manufactured from High Density Polyethylene in accordance with the specifications of ASTM F-2160 and/or NEMA TC 7. Other dimensional requirements may be acceptable upon
+GF+ CLASS 267. Factory Mutual Approved. HDPE Pipe & Pipe Fittings GEORG FISCHER PIPING SYSTEMS centralplastics.
Factory Mutual Approved CLASS 26 HDPE Pipe & Pipe Fittings CENTRAL PLASTICS 8.499.692 Table Of Contents 18-1 Design-Flow HDPE IPS HDPE Pipe (Iron Pipe ) 4-24 18-2 PE 368 HDPE Physical Properties - FM 18-3
TABLE OF CONTENTS. Pipe Diameter Chart (Reference Only)..50 Extensions 38,40,42,44
TABLE OF CONTENTS Item Page Item Page ANSI/AWWA Compact & Full Body Pipe Fittings: Product Submittals and Installation: Mechanical & Flange Joint C153. 3-9 20U Protective Fusion Bonded Epoxy....5,5 Mechanical
INNERDUCT. tidbit. Most common innerduct colors are orange and black. Other options are blue, grey, green, yellow, white, red, and striped.
innerduct Innerduct Innerduct is manufactured from High Density Polyethylene in accordance with the specifications of ASTM F-2160 and/or NEMA TC 7. Other dimensional requirements may be acceptable upon
Whapmagoostui First Nation. Main access ("B" street) Residential expansion - Phase 1 option D LIST OF MATERIALS. Revision Art.
1.0 Water distribution system Ductile cast iron pipe Ø150mm pre-insulated pipe (insulation thickness = 1.1 50 mm), Class 52 Tyton joints, conductivity stripe, (including insulation kit m 780 $ for joints)
Steese Rd - Curb & Sidewalk Improvement
REF. NO. ITEM NO. Steese Rd - Curb & Sidewalk Improvement DESCRIPTION QTY UNITS UNIT COST SUB-TOTAL 1 103.05 Requirement of Contract Bid 1 LS 24,048.00 24,048.00 2 201 Clearing and Grubbing 1 LS 11,077.00
HILLS MATERIALS COMPANY UNIT COST TOTAL COST UNIT COST TOTAL COST UNIT COST $294, $294, $74, $74, $35, $35,000.
PROJECT NAME: Anamosa Street Reconstruction - Midway Street to Miiwuakee Street PROJECT NUMBER: PROJECT NO. 07-1473 / CIP NO. 50559 LET DATE: April 11, 2017 LOW BID AMOUNT: $3,941,397.20 ENGINEER'S ESTIMATE
UNREINFORCED TUBING 10
10 TUBING G400 COPPER TUBING The copper tubing shown here is soft copper (annealed temper) tube that is easily bent and formed, and suitable for easy use with compression and flare type fittings. It is
Complete Drainage Channels with Galvanized Slotted Grating. Product Dimension Product # lbs/ Description l x h [in] unit
![Complete Drainage Channels with Galvanized Slotted Grating. Product Dimension Product # lbs/ Description l x h [in] unit](/thumbs/95/125406958.jpg "Complete Drainage Channels with Galvanized Slotted Grating. Product Dimension Product # lbs/ Description l x h [in] unit")
MEARIN 100 Complete Clear Width: 4" interior Total Width: 5.3" Material: Fiberglass Grating: Galvanized Slotted grating cover included Fall Options: Available without fall Locking System: Top Fix Snap
STANDARD DRAWING INDEX
ATTACHMENT B STANDARD DRAWING INDEX DESCRIPTION EXISTING DRAWING NO. GENERAL Typical Layout for Improvement Plans City of Stockton Standard Border and Title Block for 8 1/2 x11 Sheet City of Stockton Standard
CASING SPACERS DESIGNED FOR WATER, SEWER, OIL & GAS
CASING SPACERS DESIGNED FOR WATER TER,, SEWER,, OIL & GAS The BWM Company P.O. Box 1 Forest City, North Carolina 2803 Phone: 828.27.030 Toll Free 8 5 SPACER Fax: 828.25.59 www.bwmcompany.com BWM will provide
Pressure-compensating, Continuously Self-cleaning Dripper. Techline CV 16 mm
Sub- and On-surface dripperline with 0.14 bar Check Valve anti-drain (CV) system for efficient pulse irrigation, prevents water draining and eliminates need for refill. Check valve, anti drain mechanism
Pressure-compensating, Continuously Self-cleaning Dripper. Techline CV 17 mm
Sub- and On-surface dripperline with 0.14 bar Check Valve anti-drain (CV) system for efficient pulse irrigation, prevents water draining and eliminates need for refill. Check valve, anti drain mechanism
GWE Street Expansion (Phase 2) LIST OF MATERIALS. Unit Qty Unit price Total. unit 3 $
1.0 Water distribution system Ductile cast iron pipe Ø150mm pre-insulated pipe (insulation thickness = 50 1.1 mm), Class 52 Tyton joints, conductivity stripe, (including insulation kit for m 540 $ joints)
Vehicle and Equipment Fueling
Vehicle and Equipment Fueling SC-20 Objectives Cover Contain Educate Reduce/Minimize Description Spills and leaks that occur during vehicle and equipment fueling can contribute hydrocarbons, oil and grease,
Ford Service Saddles and Tapping Sleeves
DQS Inc. Section AA 09/2017 THE FORD METER BOX COMPANY, INC. CERTIFIED TO ISO 9001:2015 10004466 Ford Service Saddles and Tapping Sleeves Contents Recommended Product Application *Steel *C900/909*** Cast
Customer service Toll free : T F
SOLENO CONTACTS Headquarters Soleno Inc. 1160, route 133 C.P. 837, St-Jean-sur-Richelieu, QC J2X 4J5 CANADA T 450.347.7855 F 450.359.4150 Customer service Toll free : 1.877.633.7473 T 450.347.7855 F 450.347.0684
EverTUFF CPVC CTS Fittings, Valves, Pipe & Cement
CTS CPVC uct EverTUFF CPVC CTS Fittings, Valves, Pipe & Cement EverTUFF CPVC CTS Fittings, Valves, Pipe & Cement PRODUCT Contact Spears for any Information not found. Page 1 Spears Manufacturing Company
> Vacuum Tubing 4040A...Standard, EPDM D...Reinforced EPDM T...High temperature, silicone...92
Coolant Fuel Oil AIR > Defroster, Air Duct, Pre-Cleaner 7768...Low cost, thin propylene-ethylene with PP helix...83 4663A...Thicker, neoprene with wire helix...84 4663J...Heavy duty, neoprene with wire
Hayward FLT Series Cartridge Filters. Features. Webster In-Tank Filtration Systems
HAYWARD FILTERS Hayward FLT Series Cartridge Filters Designed for the most demanding applications these all plastic cartridge filters are used to filter fine particles from the process fluid. Models are
B2. Fueling Operations
B2. Fueling Operations Commercial / Industrial / Institutional & Municipal Pollution Prevention Goal: Prevent or reduce the risk of discharge of pollutants to stormwater from vehicle and equipment fueling
F200 Series. Compressed Air and Gas Filters. Heavy duty cast aluminum housings. Maximum working pressure 250 PSIG. Nine filtration grades
F200 Series Compressed Air and Gas s FEATURES Heavy duty cast aluminum housings Maximum working pressure 250 PSIG Nine filtration grades Push on filter elements BENEFITS OF THE F200 SERIES Rugged construction
WATER WATER DISCHARGE. MULTIPURPOSE General Purpose Heavy Duty Push-on CHEMICAL TRANSFER. CLEANING EqUIPMENT. Transfer Washdown MARINE
DISCHARGE Air & Temp Coupled Lay-flat Page Rubber Thermoplastic MSHA Range Lengths Construction Brigade Mine 137 Yes Yes -10 F to 150 F Yes Fire Engine Booster 223 Yes 0 F to 180 F Yes Pathfinder Garden
EASY TO OPERATE. EASY TO CLEAN. EASY TO MAINTAIN.
EASY TO OPERATE. EASY TO CLEAN. EASY TO MAINTAIN. 800.837.9711 www.superproductscorp.com PROVIDING MAXIMUM PERFORMA CAMEL MAKES ANY JOB EASIER Since its introduction more than 35 years ago, municipalities
REINFORCED LOW & HIGH PRESSURE SPRAY/TRANSFER HOSES. Silicone-free. RoHS (16) compliant.
REINFORCED LOW & HIGH PRESSURE SPRAY/TRANSFER HOSES A premium chemical spray and transfer hose for applications requiring greater chemical-resistance... excellent for high pressure tree and orchard spraying,
PP-RCT Plumbing and HVAC Piping Systems
PP-RCT Plumbing and HVAC Piping Systems Pipe Fittings Valves 9-2016 Efficient Sustainable Green Technology Asahi/America, in partnership with Bänninger of Germany, introduces - Asahitec PP-RCT piping systems
Innerlynx Type UL Fire Rated 3Hour Fire Stop ADVANCE PRODUCTS & SYSTEMS, INC. ISO-9001 CERTIFIED COMPANY - FM
Innerlynx Type UL Fire Rated 3Hour Fire Stop ADVANCE PRODUCTS & SYSTEMS, INC. ISO-9001 CERTIFIED COMPANY - FM53705 www.apsonline.com Why choose Innerlynx? offer 21 different sizes for all pipe diameters
Certa-Lok YelomineTM
CertainTeed Certa-ok YelomineTM CertainTeed s Certa-ok Yelomine Restrained Joint PVC Pressure Pipe meets the performance requirements of ASTM D2241 Standard Specification for Poly (Vinyl Chloride) (PVC),
AGRICULTURAL WATER CONTROL PRODUCTS PRODUCTS AT-A-GLANCE
AGRICULTURAL WATER CONTROL PRODUCTS PRODUCTS AT-A-GLANCE WATER DISTRIBUTION & CONTROL / DRAINAGE CONTROL / IRRIGATION CAST IRON CANAL GATES C-10 & C-20 "RED TOP" SERIES Waterman Canal Gates offer reliable
Drain Waste & Vent (DWV) Systems SCJ PIPE & FITTINGS FOR NON-PRESSURE SEWERAGE APPLICATIONS
Drain Waste & Vent (DWV) Systems SCJ PIPE & FITTINGS FOR NON-PRESSURE SEWERAGE APPLICATIONS contents Drain Waste & Vent (DWV) Systems SCJ PIPE & FITTINGS FOR NON-PRESSURE SEWERAGE APPLICATIONS product
Siphon Tubes, Poly Pipe, Fittings and PVC Cement
Siphon Tubes, Poly Pipe, Fittings and PVC Cement Siphon Tubes Fittings Poly Pipe PVC Solvent Cements and Primer Siphon Tubes Double Bend Aluminum 75 DBA 60 3/4 x 60 50 16 6.45 322.50 75 DBA 72 3/4 x 72
PLUMBING WHOLESALE CATALOG
PLUMBING WHOLESALE CATALOG PLUMBING WHOLESALE CATALOG CONTENTS Tube & Pipe Copper Tube............................8-9 Plastic-Coated Copper Tube.................10 Level Wound Copper Tube..................11
FILTERS AND STRAINERS
FILTERS AND STRAINERS Filters and Strainers filters and strainers are constructed from either type 304 or 316 stainless steel and polished to a smooth, clean sanitary finish. They are easy to assemble
GRP backing flanges DIN 2501 Flange connecting dimension PN10 WORK STANDARD. GRP backing flanges made of Polyester resin.
GRP backing flanges DIN 2501 Flange connecting dimension PN10 1310-WN-en 06 10.2002 GRP backing flanges made of Polyester resin. D 45 e d2 d1 b1 k Flange connecting dimensions according to DIN 2501 Part
HDPE Pipe. Catalogue
HDPE Pipe Catalogue HDPE PIPE Catalogue Overview Proplastics is a leading supplier of world class plastic pipe systems for water and sewer reticulation to Southern Africa. Proplastics produces a wide range
UPP Semi-Rigid Pipework System
UPP Semi-Rigid Pipework System Since being introduced as the world s first electrofusion pipework system for fuel applications over thirty years ago, UPP brand semi-rigid pipework has become known globally
TEXAS UNITED PIPE INC.
TEXAS UNITED PIPE INC. CERTIFICATIONS SPECIFICATIONS & LOADING CHARTS For PVC Pipe Manufactured by Texas United Pipe Inc. P.O. Box 41067 11627 North Houston Rosslyn Houston, Texas 77241 SALES DEPARTMENT
F200 Series. Compressed Air and Gas Filters FEATURES. Heavy duty cast aluminum housings. Maximum working pressure 250 PSIG. Nine filtration grades
F200 Series Compressed Air and Gas s FEATURES Heavy duty cast aluminum housings Maximum working pressure 250 PSIG Nine filtration grades Push on filter elements BENEFITS OF THE F200 SERIES Rugged construction
HOSE - OIL/CHEMICAL & GENERAL PURPOSE
HOSE - OIL/CHEMICAL & ENERAL PURPOSE A430 - Oil Suction and Delivery Hose 10 bar Rubber: Lining: Reinforcement: Cover: Temperature range: - DB15 Designed for suction and discharge use on various petroleum
Municipal Product Catalog
Municipal Catalog www.ipexna.com ISSUE DATE: DECEMBER 2016 Pressure Piping Systems Water Service Systems Sewer Piping Systems Specialty Municipal s We build tough products for tough environments. 18 Committed
Depth of Bury Tables 9B-5. A. General. B. Rigid Pipe Assumptions. Design Manual Chapter 9 - Utilities 9B - Trench Design
Design Manual Chapter 9 - Utilities 9B - Trench Design 9B-5 Depth of Bury Tables A. General The depth of bury tables on the following pages are based upon the design methodology from the various pipe material
Town of Medley Office of Capital Projects & Development Services 7777 NW 72 Avenue, Medley, Florida 33166
Town of Medley Office of Capital Projects & Development Services 7777 NW 72 Avenue, Medley, Florida 33166 Date: August 10, 2016 Subject: Bid for Construction of NW 89 th Avenue, NW 93 rd Street and NW
Air Handling Piping Systems
Air Handling Piping Systems ProVent - Compressed Air System - PP Vent Duct System www.asahi-america.com Table of Contents Table of Contents Product Specification... Page 350 SOCKET PIPE AND FITTINGS Pipe,
SERIES. Table 1: Available Materials Temperatures
PROCO 700 SERIES 1 The PROCO Series 700 ProFlex Rubber Check Valves are a cost effective way to control back pressures from sewage treatment plants, outfalls and tidal operations. They are a fully passive
POLYETHYLENE High Density
POLYETHYLENE High Density PE-3408/PE-3608 ENGINEERED FOR WATER AND MINING PIPING SYSTEMS PLASTIC MANUFACTURES SINCE 1953 POLYTUBES HIGH MOLECULAR WEIGHT (HMW) High Density Polyethylene Pipe for General
FIST-GSS2 FIST-GSS3. Fist Generic Splicing Shelf. Contents. 1 Introduction. 2 General. 3 Installation of the shelf. 5 Termination of the pigtails
FIST-GSS2 FIST-GSS3 I N S T A L L A T I O N I N S T R U C T I O N Fist Generic Splicing Shelf Contents 1 Introduction 2 General 2.1 Kit content 2.2 Tools 3 Installation of the shelf 3.1 Mounting the shelf
BRASS FITTINGS and Related Products
Discount Hydraulic Hose.com Cat. BR602 February, 2006 Prices Subject to change BRASS FITTINGS and Related Products Air Brake Fittings: Nylon Tubing 2 Push-In Air Brake Fittings 4 Pre-Assembled Air Brake
Pumps and Filtration
Rain Bird applies its industry leading irrigation expertise to the design and manufacture of pump stations and filters to provide solutions to meet customer requirements. By doing so, Rain Bird is the
Rare Plastics Rare SAPPMA IFPA
Rare Plastics manufacture and distribute HPE pipe & fittings from our factory in Meyerton, Gauteng. Pipes are manufactured to SANS ISO 4427 standards and sizes range from 110mm to 1000mm. The PE100 raw
FIST-GSS2. Fist Generic Splicing Shelf MK2. Contents. 1 Introduction. 2 General. 3 Installation of the shelf. 5 Termination of the pigtails
FIST-GSS2 I N S T A L L A T I O N I N S T R U C T I O N Fist Generic Splicing Shelf MK2 Contents 1 Introduction 2 General 2.1 Kit content 2.2 Tools 2.3 Optional extra s 3 Installation of the shelf 3.1
Submittal Data. Fiberglass Bondstrand 3000A Pipe
Submittal Data Fiberglass Bondstrand 3000A Pipe Uses and Applications Cooling water General service piping Jet fuel piping Mild chemicals Municipal waste Potable water Power plant, steel mill and industrial
Stormwater Treatment System
The Up-Flo Filter Stormwater Treatment System Table of Contents 3 Up-Flo Filter - Overview - General Product Description - Typical Configurations - Maintenance Services 4 Operation - Introduction - Pollutant
SDR-26 (160 PSI) SDR-21 (200 PSI) SDR-17 (250 PSI) MINIMUM WALL (IN.) 20 LENGTH. 1.5" 1.900" N/A N/A N/A.090" ".419 lbs..415 lbs.
u ASTM D2241 PRESSURE PIPE Gasketed Pipe Specifications Northern Pipe Products ASTM D2241 IPS Pressure Rated Pipe is manufactured from compounds conforming to cell class 12454 in accordance with ASTM D1784.
Contents Introduction...3 The Cascade Labyrinth...4 Pressure-compensating driplines Naan PC AmnonDrip PC, CNL & PC AS TopDrip PC & PC
DRIP IRRIGATION NaanDanJain's dripline technologies provide efficient, flexible and cost-effective solutions for a wide range of crops in diverse conditions, tailored to varied customer needs. The extensive
SERIES. Table 1: Available Materials Temperatures
PROCO 700 SERIES 1 The PROCO Series 700 ProFlex Rubber Check Valves are a cost effective way to control back pressures from sewage treatment plants, outfalls and tidal operations. They are a fully passive
Utilities Catalog. PC-U2008, February, 2008
Utilities Catalog PC-U2008, February, 2008 Tyler Utilities 11910 CR. 492 Tyler, Texas 75706 (800) 527-8478 Union Foundry Company Box 309 Anniston, Alabama 3602 (800) 226-7601 TABLE OF CONTENTS Item Page
BIDDER'S PROPOSAL (continued) CITY OF BERKELEY BID PROPOSAL ITEM NO. A: BASE BID
SPECIFICATION 16-11031-C CITY OF BERKELEY BID PROPOSAL A: BASE BID 1 MOBILIZATION 1 LS 2 TRAFFIC CONTROL 1 LS 3 CONTRACTOR INFORMATION SIGN 2 EA 4 CONSTRUCTION AREA SIGN 18 EA 5 PROJECT IDENTIFICATION
Modular platforms easy to connect with built-in U-channel Most models available with and without drain
Since the 1980s, Eagle Manufacturing has had the most flexible and comprehensive spill containment and storage product line available. As the market leader, we have trusted Compliance Solutions to help
TEC LINE PE/PVC PIPES
TEC LINE PE/PVC PIPES 100 % MADE BY MSW 100 % MADE BY MSW TEC LINE PVC-U INDUSTRIAL PIPE The MSW tec line PVC-U plastic pipes are superbly suited for the application in industry, agriculture, swimming
REINFORCED LOW & HIGH PRESSURE SPRAY/TRANSFER HOSES. One-piece lengths. Service Temperature Range: -40 F (-40 C) to +125 F (+52 C)
Lightweight polyethylene-lined rubber blend hose that is the ideal choice for handling paint and paint-related products in a variety of applications. Tube Co-extruded blue LLDPE/rubber blend. Reinforcement
BEST MANAGEMENT PRODUCTS, INC. The SNOUT OIL-WATER-DEBRIS SEPARATOR SPECIFICATIONS U.S. Patent # Canadian Patent #
1. PRODUCT NAME The SNOUT Oil-Water-Debris Separator U. S. Patent # 6126817 Canadian Patent # 2285146 2. MANUFACTURER Best Management Products, Inc. 53 Mt. Archer Rd. Lyme CT 06371 Phone: (800) 504-8008
CONTRACTOR'S REQUEST FOR PAYMENT CHASKA VETERANS PARK IMPROVEMENTS STANTEC PROJECT NO
Owner: City of Chaska, 1 City Hall Plz., Chaska, mn 55318 Date: December 12, 2017 For Period: 12/1/2017 to 1/31/2018 Request No: 1 Contractor: Blackstone Contractors, LLC, 9520 County Rd. 19, Ste. D, Loretto,
PVC Gasketed Fittings for PVC IPS Pressure Pipe ENGINEERED FOR DURABILITY
For the most up-to-date version of this price list, EFFECTIVE MARCH 4, 2019 ENGINEERED FOR DURABILITY HARRINGTON CORPORATION P.O. BOX 10335 LYNCHBURG, VIRGINIA 24506-0335 For the most up-to-date version
First Defense. Stormwater Treatment System. Operation and Maintenance Manual
First Defense Stormwater Treatment System Operation and Maintenance Manual First defense OPERATION AND MAINTENANCE Table of Contents 3 First Defense by Hydro International - Benefits of the First Defense
Rigid PVC Conduit Fittings & Accessories. For Use in Above Ground, Underground and Encased Installations
Rigid PVC Conduit Fittings & Accessories For Use in Above Ground, Underground and Encased Installations RIGID PVC CONDUIT FITTINGS AND ACCESSORIES A rigid, non-metallic integrated system of couplings,
GAS DISTRIBUTION PRODUCTS METER RISERS
GAS DISTRIBUTION PRODUCTS METER RISERS INDUSTRIES ABOUT US THE ULTIMATE CONNECTION Our Company Continental Industries, headquartered in Tulsa, Oklahoma, was formed in 1958 and is today a leading manufacturer
MUNICIPAL WATER PRODUCTS OVERVIEW
MUNICIPAL WATER PRODUCTS OVERVIEW Oldcastle Enclosure Solutions understands what makes your projects successful the right Enclosure, for the right location, for the right application. We are dedicated
PRODUCT SPECIFICATION
PVC piping systems are ideally designed for use in agricultural irrigation including row crop, forage and nursery crop applications and work particularly well in drag, mechanical move and side-shift operations.
BLUE ULTRA Pipe & Tubing contains no regrind resin in its manufacture
BLUE ULTRA is extruded using current state of the art 100% pure PE4710 virgin resin with decades of successful history - no extra wall thickness is required to retain its extreme level of UV protection