Hayward FLT Series Cartridge Filters. Features. Webster In-Tank Filtration Systems

Size: px

Start display at page:

Download "Hayward FLT Series Cartridge Filters. Features. Webster In-Tank Filtration Systems"

Beverly Parks
6 years ago
Views:

HAYWARD FILTERS Hayward FLT Series Cartridge Filters Designed for the most demanding applications these all plastic cartridge filters are used to filter fine particles from the process fluid.

An integral plug on the hand removable filter cover makes for easy bleeding of the unit.

1 HAYWARD FILTERS Hayward FLT Series Cartridge Filters Designed for the most demanding applications these all plastic cartridge filters are used to filter fine particles from the process fluid. Models are available to accommodate, 0 and 0 wound or pleated polypropylene filter cartridges. The filters are designed so that compression seals the filter unit eliminating the need for a center rod. An integral plug on the hand removable filter cover makes for easy bleeding of the unit. The filters feature a / NPT (female) inlet connection to eliminate the chance for broken NPT (male) connections. An optional mounting base is available for mounting the filter to the floor or work surface. All wound cartridges have a I.D. and / O.D. The pleated cartridges have a I.D. and -/ O.D. Maximum flow rates for both are GPM per of filter cartridge length. Cartridges are sold separately. Hayward FLT Cartridge Filters are small, compact, and a perfect partner to any Webster chemical duty, corrosion resistant pump. Applications: For to 0 micron filtration in the following industries: Plating Electronics Photo processing Pollution control Chemical processing Water treatment All Plastic CPVC Construction Will Never Rust or Corrode Compact, Easy to Install No Metal in Contact with the Process Fluid Quick and Easy Filter Cartridge Changes FPM O-Ring Seal Webster In-Tank Filtration Systems Designed to filter process fluid within a tank; eliminating the time and expense needed to install a stand alone filter and pump. Changing filter cartridges is quick and easy. A simple quick disconnect union is used to connect the filter cartridge to the pump. Simply unscrew the union (no tools are required) and remove the filter cartridge and assembly. The In-Tank Filtration unit comes standard with one 0 micron wound, polypropylene filter cartridge. Cartridges are also available in,,, 0, and 0 micron ratings and have a I.D. and a / O.D. Single or double cartridge configurations are available in either or 0 lengths. In-Tank Filtration Systems are available with Series S and D pumps that are seal-less and can be run dry. These heavy duty, reliable pumps come with Hayward s unique two year warranty. Applications: For to 0 micron filtration in the following industries: Plating Electronics Photo processing Pollution control Chemical processing Water treatment For use with S and D-Series Pumps CPVC Corrosion-Resistant Construction Compact and Easy to Install Immersible, Seal-Less, Bearing Free Pump Can Run Dry Quick and Easy Filter Change Single or Double Filter / HP Model a Built-in Power Cord Hayward Filter Bags Hayward Filter Bags are available in polypropylene felt filter bags - sewn construction, polypropylene monofilament filter bags - sewn construction, or polypropylene felt filter bags - welded construction. Mircron Rating:,,,, 0, 0,, 00, 00, 00, 00 Lengths: and Please contact customer service for assistance in sizing your Filter Bag. -

HAYWARD FILTERS Hayward PVC/CPVC Simplex Bag Filter All-plastic construction FPM seals Hand-removable cover Integral mounting base True union connections Vent valve on cover In-line or loop flow For

This permits the vessel to be used with thousands of different types of filter bags to exactly match the application requirements.

2 HAYWARD FILTERS Hayward PVC/CPVC Simplex Bag Filter All-plastic construction FPM seals Hand-removable cover Integral mounting base True union connections Vent valve on cover In-line or loop flow For application versatility, these all plastic housings will accept most standard diameter filter bags. The single length vessel uses Size 0 bags, x, while the double length vessel uses Size 0 bags, x. This permits the vessel to be used with thousands of different types of filter bags to exactly match the application requirements. This all plastic housing is designed to stand up to the most demanding industrial and commercial applications around. The rugged, thick wall construction ensures years of trouble free service and the housing is rated at a full PSI. The built-in true union piping and drain connections makes installation and operation quick and easy. With this feature the filter housing can be removed without having to break down the piping system. The integral mounting base also makes for an easy installation and eliminates the need for extra cost support legs. The housing has two bottom outlet connections so that either can be used as a drain connection. This makes possible both in-line or loop piping installations. The one-piece, corrosion resistant plastic body has an extremely smooth interior surface that is very easy to clean. The housing comes standard with a plastic cover vent valve. The handremovable, no tools required, spin-off cover makes filter bag changing quick and easy. There are no swing bolts to deal with as on a metal filter housing. Flanged connections EPDM seals Pressure differential gauge and switch Manifolded housings / NPT pressure differential gauge tap Metric connections PART # MATERIAL SIZE END CONN. FLT PVC Single Socket/Thread FLTF PVC Single Flanged FLT PVC Double Socket/Thread FLTF PVC Double Flanged FLT0 CPVC Single Socket/Thread FLT0F CPVC Single Flanged FLT0 CPVC Double Socket/Thread FLT0F CPVC Double Flanged All bag filters feature a one piece, seamless, moulded plastic body, have Viton seals and are assembled with silicone free lubricant. Simplex bag filters use single length x No. bags or double length x No. bags. Polypropylene felt filter bags are available in,,,, 0, 0 and 00 microns and in either welded or sewn construction. Polypropylene monofilament filter bags are available in sewn construction in, 00, and 00 microns. Hayward PVC/CPVC Duplex Bag Filter Polypropylene felt filter bags are available in,,,, 0, 0 and 00 microns and in either welded or sewn construction. Polypropylene monofilament filter bags are available in sewn construction in, 00, and 00 microns. With an all-plastic, corrosion-resistant Hayward Duplex Bag Filter, there is never a need to shut down the line and there is never any downtime necessary when changing filter bags. Just turn the lever handle to divert flow from one filter housing to the other, then spin off the hand-removable cover, remove the dirty bag and install a new one. such as a rugged, lightweight fiberglass mounting platform and a vent/ bleed valve installed on both filter housing covers are standard with every Hayward All-Plastic Duplex Bag Filter. The retaining basket that holds the bag has a unique, universal seat that works with almost any single or double length filter bag. No line shutdown for bag Vent gauge with gauge guards changeout Pressure Differential Gauges Built-in mounting platform Pressure Differential Switches In-line or loop flow Automated Operation - Electric or Pneumatic PART # HOUSING DIVERTER VALVE SIZE END CONN. FLTDUPA PP CPVC Double Flanged FLTDUP PVC PVC Double Flanged FLTDUP CPVC CPVC Double Flanged - Toronto, Edmonton, Saskatoon, Vancouver, Montreal

injection molded construction, for superior

3 HAYWARD FILTERS Hayward FLV Series Filter Vessels All thermoplastic, glass filled polypropylene injection molded construction, for superior corrosion resistance performance! -

HAYWARD FILTER BAGS Hayward Felt and Mesh Filter Bags Micron Ratings Micron- 00 Micron bags available Materials Polypropylene Needle Felt Rated up to 00 F Polyester Needle Felt Rated up to 00 F

Other bags have a sewn-in cloth handle for removal. Single and Double Length All bags are made with silicone-free material. Bags are made in two lengths.

Sewn Construction A sewn bag has the strength of a mechanically secure, sewn seam. These bags have two sewn lines to make sure that certain particles do not pass through the filter bag.

4 HAYWARD FILTER BAGS Hayward Felt and Mesh Filter Bags Micron Ratings Micron- 00 Micron bags available Materials Polypropylene Needle Felt Rated up to 00 F Polyester Needle Felt Rated up to 00 F Polypropylene Monofi lament Mesh Rated up to 00 F Nylon Monofi lament Mesh Rated up to F PP Flange Handles Flanged bags have PP handles at the top to make removal easier. Other bags have a sewn-in cloth handle for removal. Single and Double Length All bags are made with silicone-free material. Bags are made in two lengths. Type single length is " x " and Type double length is " x ". Both industry standard bag sizes fit Hayward s single or double length filter vessel. Sewn Construction A sewn bag has the strength of a mechanically secure, sewn seam. These bags have two sewn lines to make sure that certain particles do not pass through the filter bag. These bags are made from media that is silicone free and are sewn with silicone free thread so that the filtrate is not contaminated. Welded Construction Welded construction filter bags have the fabric fused together to form the bag and secure the sealing ring. Modern fabric welding technology provides a strong seal that won t leak or come apart in the flow. Sewn-in Bag Ring Another construction consideration is the type of sealing ring. This is a ring at the opening of the bag that helps seal it to the housing. It can be made of plastic or metal. The ring material is important not only for chemical compatibility, but also for disposal purposes. If the bag is going to be disposed of by incineration, it s important that the ring be plastic, and not metal. Hayward bags are made with a sewn-in PP ring. PP Flange Ring Consider the ring material of the bag when looking at chemical compatibility of the application. Hayward flanged bags have a PP flange ring. - Toronto, Edmonton, Saskatoon, Vancouver, Montreal

5 HAYWARD FILTER BAGS -

-/ Socket YS0F -/ Flanged YS00T Thread YS00S Socket YS00F Flanged YS00T Thread YS00S Socket YS00F Flanged Hayward Plastic Y-Strainers Hayward Y-Strainers protect piping system components from damage

6 HAYWARD Y-STRAINERS PVC PART # SIZE END CONN. YS00T / Thread YS00S / Socket YS0T / Thread YS0S / Socket YS0T Thread YS0S Socket YST -/ Thread YSS -/ Socket YST -/ Thread YSS -/ Socket YS00T Thread YS00S Socket YS00F Flanged YS0T -/ Thread YS0S -/ Socket YS0F -/ Flanged YS00T Thread YS00S Socket YS00F Flanged YS00T Thread YS00S Socket YS00F Flanged Hayward Plastic Y-Strainers Hayward Y-Strainers protect piping system components from damage caused by dirt or debris in the process media. They cost less than other types of strainers and are light weight and very compact. Because they can often be supported by the pipeline alone, they work in applications where other types of strainers cannot. Hayward Y-Strainers are supplied with a / perforated plastic screen. This screen is ultrasonically welded, not glued, for superior strength. Screens fabricated from Type stainless steel are also available in openings from / down to a super fine mesh. All screens have an open area at least twice that of the equivalent pipe size cross-sectional area to minimize pressure drop. All sizes of Hayward Y-Strainers feature a heavy-duty hex cap that permits quick and easy removal of the strainer screen when cleanout becomes necessary. Hayward Y-Strainers work equally well in the horizontal or vertical position, simplifying piping system layout. This strainer is available in clear PVC which permits viewing of the strainer screen in operation. This helps determine when it needs cleaning based on a visual check of the amount of debris retained by the screen. These Y- Strainers are available in sizes from / to with socket or threaded pipe connections. Horizontal or Vertical Installation : Open Air Ratio Hex Cap for Easy Access to Screen Plastic Screen has / Perforation CPVC PART # SIZE END CONN. YS000T / Thread YS000S / Socket YS00T / Thread YS00S / Socket YS00T Thread YS00S Socket YS0T -/ Thread YS0S -/ Socket YS0T -/ Thread YS0S -/ Socket YS000T Thread YS000S Socket YS000F Flanged YS00T -/ Thread YS00S -/ Socket YS00F -/ Flanged YS000T Thread YS000S Socket YS000F Flanged YS000T Thread YS000S Socket YS000F Flanged CLEAR PVC PART # SIZE END CONN. YS0000T / Thread YS0000S / Socket YS000T / Thread YS000S / Socket YS000T Thread YS000S Socket YS00T -/ Thread YS00S -/ Socket YS00T -/ Thread YS00S -/ Socket YS0000T Thread YS0000S Socket Stainless Steel Strainer Screens All Y-Strainers have an FPM o-ring seal and are assembled with silicone free lubricant. Each Y-Strainer includes one / perforated plastic screen. Y-strainers are available with Stainless steel screens. To replace the plastic screen with an all stainless one, there will be a price adder. Screens have some plastic components. Stainless steel screens are available in perforations of /, /, /, /, & /. / perf offered only on -/ and larger Y-strainers. Stainless steel mesh screens come in sizes 0, 0, 0, 0, 0, 00 and - Toronto, Edmonton, Saskatoon, Vancouver, Montreal

HAYWARD BASKET STRAINERS Hayward Simplex Plastic Basket Strainers External Body Threads Low Pressure Drop In-Line or Loop Piping Design True Union Connections Ergonomic Hand-Removable Cover FPM Seals

7 HAYWARD BASKET STRAINERS Hayward Simplex Plastic Basket Strainers External Body Threads Low Pressure Drop In-Line or Loop Piping Design True Union Connections Ergonomic Hand-Removable Cover FPM Seals Integral, Flat Mounting Base Liquid Displacing Cover Stainless steel strainer baskets Pressure differential gauge and switch Clear, see-through model made of Eastar EPDM seals (add an E to end of part #) Polypropylene and Food-Grade FRP also available When pipeline system components require protection from dirt and debris and the line can be shut down for basket cleaning, a Hayward All Plastic Simplex Basket Strainer is the ideal choice. Unwanted particles are removed as the process media passes through a perforated strainer basket contained inside the strainer body. The basket traps the unwanted material while allowing the process media to flow freely. Changing or cleaning the strainer basket is quick and easy. The handremovable, spin-off cover features two angled handles for easy access to the strainer basket. The housing features external cover threads that do not contact the process media and never need cleaning. Venting and draining are made possible by two hand-removable, threaded plugs - one on the top of the cover and the other on the housing side. Hayward Simplex Basket Strainers can be installed either in-line or with loop piping configurations. This is made possible by a unique design that incorporates three piping connections on the strainer body that are used as inlets and outlets. The unused connection is plugged using a blind fitting (included). True Union connections make it possible to remove the strainer from the piping system without disassembling the piping connections. Plastic Baskets in perforation sizes from / to / are available. Stainless steel perforated baskets are available from / to /. Mesh stainless steel baskets for very fine straining applications are available in sizes from 0 mesh down to mesh. PVC CPVC PART # SIZE END CONN. PART # SIZE END CONN. SB0SF / Flanged SB00SF / Flanged SBST / Skt/Thd SB0ST / Skt/Thd SBSF / Flanged SB0SF / Flanged SB0ST Skt/Thd SB0ST Skt/Thd SB0F Flanged SB0F Flanged SBST -/ Skt/Thd SBST -/ Skt/Thd SBF -/ Flanged SBF -/ Flanged SBST -/ Skt/Thd SBST -/ Skt/Thd SBF -/ Flanged SBF -/ Flanged SB0ST Skt/Thd SB00ST Skt/Thd SB0F Flanged SB00F Flanged SBT -/ Threaded SB0T -/ Threaded SBS -/ Socket SB0S -/ Socket SBF -/ Flanged SB0F -/ Flanged SB0T Threaded SB00T Threaded SB0S Socket SB00S Socket SB0F Flanged SB00F Flanged SB0T Threaded SB00T Threaded SB0S Socket SB00S Socket SB0F Flanged SB00F Flanged SB00FT Flanged SB00FT Flanged SB00FT Flanged SB00FT Flanged Basket Selection The / to strainers can be ordered with either a / or / perf plastic basket. The / and with a /, /, /, or / perf plastic basket. The and with a /, / or / perf plastic basket. The and with a / or / perf plastic basket. Stainless steel baskets for all size strainers are available in these perfs: /, /, /, /, /, /, /, /, /, /, / ; and in mesh sizes: 0, 0, 0, 0, 0, 00, -

HAYWARD BASKET STRAINERS Hayward Duplex Basket Strainers Stainless steel strainer baskets Pressure differential gauge and switch Clear, see-through model made of Eastar EPDM seals (add an E to end of

8 HAYWARD BASKET STRAINERS Hayward Duplex Basket Strainers Stainless steel strainer baskets Pressure differential gauge and switch Clear, see-through model made of Eastar EPDM seals (add an E to end of part #) Polypropylene also available External Body Threads Low Pressure Drop Operates Continuously, No Shut Down For Basket Cleaning or Changing True Union Connections and FPM Seals Ergonomic Hand-Removable Cover Hand-Removable Vent and Drain Liquid Displacing Cover / thru Strainers are supplied with both socket and threaded end connectors. For /, / and Basket Strainers, standard perforation is /. For -/ thru Basket Strainers, standard perforation is /. All Simplex Basket Strainers are assembled with silicone free lubricant. Each Simplex Basket Strainer includes one plastic basket. If perforation is not specified, then standard basket perforation will be supplied. The / to strainers can be ordered with either a / or / perf plastic basket. The -/ and with a /, /, /, or / perf plastic basket. The and with a /, / or / perf plastic basket. The and with a / or / perf plastic basket. Stainless steel baskets for all size strainers are available in these perfs: /, /, /, /, /, /, /, /, /, /, / ; and in mesh sizes: 0, 0, 0,0, 0, 00, When pipeline system components require protection from dirt and debris and the line cannot be shut down for basket cleaning, a Hayward All Plastic Duplex Basket Strainer is the ideal choice. Unwanted particles are removed as the process media passes through a perforated strainer basket contained inside the strainer body. The basket traps the unwanted material while allowing the process media to flow freely. The flow never has to be shut off for basket cleaning or changing. Changing or cleaning the strainer basket is quick and easy. Turning the operating handle on the diverter valve assembly switches the flow from one strainer housing to the other. Then, the out of service housing can be serviced by opening the hand-removable, spin-off cover that features two angled handles for easy access to the strainer basket. The housings have external cover threads that do not contact the process media and never need cleaning. Venting and draining are made possible by two hand-removable, threaded plugs on the cover and side of the housings. Hayward Duplex Basket Strainers can be installed either inline or with loop piping configurations. This is made possible by changing the orientation of the bottom outlet connection. PART # PVC SIZE END CONN. PART # CPVC SIZE END CONN. DB0ST / Skt/Thd DB00ST / Skt/Thd DB0SF / Flanged DB00SF / Flanged DBST / Skt/Thd DB0ST / Skt/Thd DBSF / Flanged DB0SF / Flanged DB0ST Skt/Thd DB0ST Skt/Thd DB0F Flanged DB0F Flanged DBST -/ Skt/Thd DBST -/ Skt/Thd DBF -/ Flanged DBF -/ Flanged DBST -/ Skt/Thd DBST -/ Skt/Thd DBF -/ Flanged DBF -/ Flanged DB0ST Skt/Thd DB00ST Skt/Thd DB0F Flanged DB00F Flanged DBT -/ Threaded DB0T -/ Threaded DBS -/ Socket DB0S -/ Socket DBF -/ Flanged DB0F -/ Flanged DB0T Threaded DB00T Threaded DB0S Socket DB00S Socket DB0F Flanged DB00F Flanged DB0T Threaded DB00T Threaded DB0S Socket DB00S Socket DB0F Flanged DB00F Flanged DB00FT Flanged DB00FT Flanged DB00FT Flanged DB00FT Flanged - Toronto, Edmonton, Saskatoon, Vancouver, Montreal

9 HAYWARD BASKET STRAINERS Hayward Strainer Baskets It is recommended that one spare basket per strainer be kept on hand at all times. The old style baskets are available upon request, while supplies last. An adapter is required when using Stainless Steel baskets. Other perforations may be available upon request. FOR /, /, AND PVC SS CORZAN CPVC SS / BS0/ 0 BS00 / BS0/ / BS0/ / BS0/ 0 BS00 / BS0/ / BS0/ / BS0/ 0 BS00 / BS0/ / BS0/ / BS0/ 0 BS00 / BS0/ / BS0/ 0 BS00 FOR -/, -/, AND PVC SS CORZAN CPVC SS / BS0/ 0 BS000 / BS00/ / BS00/ / BS0/ 0 BS000 / BS00/ / BS00/ / BS0/ 0 BS000 / BS00/ / BS00/ / BS0/ 0 BS000 / BS00/ / BS00/ 0 BS000 FOR -/,, AND PVC SS CORZAN CPVC SS / BS0/ 0 BS000 / BS00/ / BS00/ / BS0/ 0 BS000 / BS00/ / BS00/ / BS0/ 0 BS000 / BS00/ / BS00/ / BS0/ 0 BS000 / BS00/ / BS00/ 0 BS000 FOR PVC SS CORZAN CPVC SS / BS00/ 0 BS00 / BS00/ / BS00/ / BS00/ 0 BS00 / BS00/ / BS00/ / BS00/ 0 BS000 / BS00/ / BS00/ / BS00/ 0 BS000 / BS00/ / BS00/ 0 BS000 FOR PVC SS CORZAN CPVC SS / BS00/ 0 BS00 / BS00/ / BS00/ / BS00/ 0 BS00 / BS00/ / BS00/ / BS00/ 0 BS000 / BS00/ / BS00/ / BS00/ 0 BS000 / BS00/ / BS00/ 0 BS

FILTERS DOUBLE LENGTH, DUPLEX DOUBLE LENGTH, SIMPLEX SINGLE LENGTH, SIMPLEX SINGLE LENGTH, DUPLEX

FLV Series Bag and Cartridge Filters - Overview ALL THERMOPLASTIC, GLASS FILLED POLYPROPYLENE INJECTION MOLDED CONSTRUCTION, FOR SUPERIOR CORROSION RESISTANCE PERFORMANCE FILTERS DOUBLE LENGTH, DUPLEX