GWE Street Expansion (Phase 2) LIST OF MATERIALS. Unit Qty Unit price Total. unit 3 $

Size: px

Start display at page:

Download "GWE Street Expansion (Phase 2) LIST OF MATERIALS. Unit Qty Unit price Total. unit 3 $"

Melinda Bryan
5 years ago
Views:

1 1.0 Water distribution system Ductile cast iron pipe Ø150mm pre-insulated pipe (insulation thickness = mm), Class 52 Tyton joints, conductivity stripe, (including insulation kit for m 540 $ joints) 1.2 Heat shrink sleeves 300 mm wide (100' roll) roll Ductile cast iron elbow 150 mm (11 1/4) - class 52 (including insulation shell 50 mm (Urecon)) 1.4 Ductile cast iron elbow 150 mm (22 1/2) - class 52 (including insulation shell (Urecon)) unit 8 $ 1.5 Ductile cast iron elbow 150 mm (45 ) - class 52 (including insulation shell 50 mm (Urecon)) unit 18 $ 1.6 Ductile cast iron Tee 150 mm - Class 52 (including insulation shell 50 mm (Urecon)) unit Cast iron straight couplings, 150 mm (Ford ultra Flex wide range couplings FC2W-6-L12) unit Gate Valve 150 mm including gaskets, bolts and insulation shells (Urecon) (Clow F6100, Mueller A2360, or equiv) 1.9 Composite valve box bottom part 7' (Bibby VB-5337L or Mueller MVB070) 1.10 Valve box upper part (Bibby VB-655MA or equivalent) 1.11 Valve box guide plate (Bibby VB-875 or Mueller MVB875) 1.12 Locking Cover (Bibby S-881 or equivalent) Debris Cap with locking device (Debriscap DC 457 with LD or equiv)

2 Mechanical joint for 150 mm ductile iron pipe joints class 52, including 1.14 gasket, restraining rods and bolts unit 64 $ (Tyler Union TufGrip TLD-6 or Star Pipe 3000 series) Restraint for Bell/Spigot for 150 mm ductile iron pipe joints class 52, 1.15 including gasket, restraining rods and bolts (EBAA Iron Split Megalug Bell unit 33 $ restraint harness or equiv.) 1.16 Detectable Underground Warning Tape m 540 $ 1.17 Concrete stop for water line (600 mm x 600 mm x 1200 mm) unit $ Fire hydrant (3 units. Heating cable kits not included): Mueller Modern Centurion Hydrant A-448 (on line with vertical shoe), 1.18 including 8' Burry (flanged lower barrel; 150mm x 8' ductile iron class 52 riser pipe) " flanged riser kit for fire hydrant extension including gaskets and bolts (Mueller or equiv.) 1.20 Gate Valve 150 mm ( Clow F6100, Mueller A2360, or equiv) Composite valve box bottom part 7' (Mueller MVB070 or 1.21 Bibby VB-5337L) 1.22 Valve box upper part (Bibby VB-655MA or equivalent) 1.23 Valve box guide plate (Mueller MVB875 or Bibby VB-875) 1.24 Locking Cover (Bibby S-881 or equivalent) Debris Cap with locking device (Debriscap DC 457 with LD or equiv)

3 1.26 "T'' ductile iron 150 mm (MJ x MJ x FL) including 1 FF gasket + bolts Mechanical joint 150 mm including gasket and bolt 1.27 unit 18 $ (Tyler Union TufGrip TLD-6 or Star Pipe 3000 series) 1.28 Ductile iron pipe 150 mm class 52 (Canada pipe) m 9 $ 1.29 Insulation shells (3 m) for ductile iron pipe 150 mm (complete shells) (Urecon or equiv.). m 9 $ 1.30 Insulation shells for Mueller Centurion hydrant On-line, 8' (Urecon, or equiv) Kit 3 $ 1.31 Insulation shells for gate valve 150 mm with MJ (Urecon, or equiv) kit 6 $ 1.32 Insulation shell for ''Tee'' 150 mm (Urecon, or equiv) kit 3 $ Galvanised corrugated steel pipe 400mmØ, 2mm thick - 0,6m. For valve box 1.33 m 4,6 $ protection 1.34 Galvanised pipe 6 5/8'' x 0,280'' x 8' filled with concrete unit 9 $ 1.35 Yellow bollard cover with reflector red band unit 9 $ Galvanised corrugated steel pipe 400mmØ, 2mm thick - 0,3m. For Bollard 1.36 m 0,9 $ base. Service connections (13 units) Pitot oriffice 3/4'' Pitot mounted on 19mm bronze corporation stop (no drain) for direct tapping 1.37 on a Ductile Iron pipe 150mmØ Class52-19mmØ MIPT X 19mmØ CTS unit 28 $ HDPE (Ford F P-NL (Corp Stop including Pito for a 150mmØ cast iron main)

4 1.38 Insert stiffeners 3/4"Ø, 304 stainless steel (Ford Insert-51) unit 62 $ 1.39 Saddle (Robar 2626 DB 6'' X 3/4'') unit 10 $ Curb stop 3/4", 19mmØ, CTS HDPE X 19mmØ, CTS HDPE (no drain) with 1.40 Pack joint connectors (w/tightening srews) unit 28 $ (Ford B NL ) 1.41 Frost stop (Adaptor HDPE for curb stop to create a thermal break) / Frost stop from Urecon unit 26 $ " x 6" x 8' Treated wood timber to put under curb stop unit 13 $ Curb stop box, Complete Curb Stop service box for a +/- 6 feet burry curb 1.43 unit 26 $ stop valve (Standard cast Iron curb stop service box ) Pipe PEHD 3/4'' 500 feets long spool of PEHD DR9 19mmØ CTS / Ipex 1.44 spool 5 $ OR PSI CTS HDPE (500 feet roll) Carrying Pipe 40 ft Long section of 100mmØ HDPE DR17 preinsulated pipe 1.45 with 50mm insulation and polyethylene protective layer (+/- 40 ft per service connection) / Preinsulated pipe from Urecon (50mm polyurethane covered section 25 $ with 1,27 mm PE tape Insulation shell, insulation shell for 100 mmø HDPE joint insulation /Urecon 1.46 kit 30 $ Insulation kit 2'' thick 18 '' long with installation accesories Electro fusion joint, Electrofusion coupling 100mmØ for HDPE / IntegriFuse 1.47 unit 30 $ coupling 1.48 Protection layer, Hand roll PE tape (self adhesive) / 100 ft long x 6'' wide rolls unit 13 $ 1.49 Heat shrink 300 mm wide 100 'roll (Urecon or equiv.) roll 1 $ 1.50 Insulation foam, Portafoam kit #200 containing +/- 17 cubic foot of insulation unit 13 $

5 Heating cable, Self limiting heating cable 3 10 C (120V) to do a back 1.51 spool 3 $ and forth (+/- 85ft /unit) / BSX 3-1 from Thermon (500' spool) Alluminium tape, Roll of 2'' wide 180' long alluminium tape to attach Heating 1.52 cable on accessories at curb stop and connection to the main to ensure no roll 3 $ foam goes between heating cable and valves/pipes / AL-20H from Thermon 1.53 Winter elctric tape, PVC all seson-winter electric tape 3/4'' X 66' to attach return line, supply line and heating cable every foot. roll 5 $ Mecanical thermostat, Mecanical thermostat 0 C to 50 C in a Nema 1 box 1.54 equiped with a minimum 12 feet long lead & bulb for an installation at 3m unit 13 $ from heated building. R1 from Thermon 1.55 Termination kit (End of heating cable termination kit) 18 SXG from Thermon unit 15 $ 1.56 Jct. Box Connect. Kit (Kit to adapt the heating cable for a connection on a regular jct box) / ET-6 from Thermon unit 15 $ 1.57 Regular Jct. Box (Regular Jct. Box 20 A for the jct of heating cable, thermostat lead, electric supply cable (3 wires)) / Standard (by electrician) unit 15 $ 1.58 Torpedo Ø 150 mm for cast iron unit 2 $ 1.59 Liquid chlorine (20 L) Sub-total $

6 2.0 Domestic sewer 2.1 Domestic sewer Ø250 mm DR-35 (pre insulated) m 342 $ Reinforced concrete circular manhole (including riser section) - Ø 900 mm (see plans for detail) D-3A ( Ø 900 mm) w/ gaskets D-3B ( Ø 900 mm) w/ gaskets D-05 ( Ø 900 mm) w/ gaskets D-06 ( Ø 900 mm) w/ gaskets D07 ( Ø 900 mm) w/ gaskets D08 ( Ø 900 mm) w/ gaskets 2.8 Additional manhole without any hole ( Ø 900 mm): base 1130mm + extension 900mm 2.9 Additional manhole without any hole ( Ø 900 mm) base 1130mm + extension 600mm 2.10 Insulated manhole removable opening cover unit 8 $ 2.11 Cast iron frames and covers for manholes (standard) - Ø 572 mm unit 8 $ 2.12 Service line (T and cap included, 13 units)/ Pre-insulated pipe, T and cap - DR-35 Ø125 mm m 260 $

7 2.13 Rigid polystyrene insulation, type HI-40 - (1200mm x 50mm x 2400mm) m $ Portable Foaming Generator (Portafoam kit) #200, min. density 30 kg/cu.m., 2.14 unit 15 $ 600 board feet (1,42 m 3 ) 2.15 Riser section for concrete circular manhole, Ø 900 mm x 200mm H Sub-total $

8 3.0 Storm sewer 3.1 Storm sewer Ø 300 mm HDPE R320 (R320 kpa) m 132 $ 3.2 Storm sewer Ø 375 mm HDPE R320 (R320 kpa) m 42 $ 3.3 Storm sewer Ø 450 mm HDPE R320 (R320 kpa) m 18 $ Reinforced concrete circular manhole (including riser section) (see plans for details) 3.4 -S-04B ( Ø 900 mm) w/ gaskets 3.5 -S-04C ( Ø 900 mm) w/ gaskets 3.6 -S-04E ( Ø 900 mm) w/ gaskets 3.7 -S-04F ( Ø 900 mm) w/ gaskets 3.8 -SE-04 manhole (Ø 900 mm) riser section 900 mm w/ gasket 3.9 Manhole-storm pipe connector (Ø 300 mm) 3.10 Manhole-storm pipe connector (Ø 375 mm) 3.11 Insulated manhole cap opening cover unit 4 $ 3.12 Cast iron frames and covers for manholes - Ø 572 mm unit 4 $

9 3.13 Catch basin 600 mm Ø w/ rubber gaskets unit 10 $ 3.14 Riser section for catch basin, 600mm x 150 mm 3.15 Riser section for catch basin, 600mm x 300 mm Portable Foaming Generator (Portafoam kit) #200, min. density 30 kg/cu.m., 3.16 unit 8 $ 600 board feet (1,42 m 3 ) 3.17 Catch basin cover and grid (Laperle P45-A or Laroche equiv. model) unit 10 $ mm Ø PVC pipe DR35 for catch basin connection to main storm sewer m 60 $ 3.19 Pipe adaptor (coupling) for PVC pipe DR35 to HDPE R320 (R320 kpa) pipe unit 13 $ 3.20 Geotextile membrane 3,5 m x 100 m (Texel 7612 or equiv.) roll 1 $ Sub-total $

10 4.0 Transportation Maritime packaging, shipping and transportation fees 4.1 to Whapmagoostui (via NEAS: 950 Gérard Cadieux Blvd, Port of Valleyfield, lump $ Salaberry-de-Valleyfield, Québec J6T 6L4) Maritime packaging, shipping and transportation fees 4.2 to Whapmagoostui (via DESGAGNÉ: 6565, boulevard Hébert, bureau 201, lump $ Sainte-Catherine (Québec) J5C 1B5) 4.3 Road transport of materials to Wemindji including maritime packaging for loading on barge lump $ Sub-total $ TOTAL (taxes excluded) $

Whapmagoostui First Nation. Main access ("B" street) Residential expansion - Phase 1 option D LIST OF MATERIALS. Revision Art.

Whapmagoostui First Nation. Main access (B street) Residential expansion - Phase 1 option D LIST OF MATERIALS. Revision Art. 1.0 Water distribution system Ductile cast iron pipe Ø150mm pre-insulated pipe (insulation thickness = 1.1 50 mm), Class 52 Tyton joints, conductivity stripe, (including insulation kit m 780 $ for joints)