SECTION II. (Sub-Section 300) Standard Water System Materials (Illustrations)
|
|
|
- Daniel Chase
- 6 years ago
- Views:
Transcription
1 SECTION II (Sub-Section 300) Standard Water System Materials (Illustrations) Item Page PVC Pipe, DR 14, DR 18, DR 25 (4 thru 24 ) Fire Hydrant Polyethylene Tubing, PE 3408, SDR-9, CTS Pressure Type Vacuum Breaker (1/2 2 ) Non-pressure Type Vacuum Breaker (1/4 2 ) Backflow Preventer, RPZ assembly (3/4-2 ) Double Check Valve Detector assembly (2 ½ -10 ) W/ Bypass Meter Double Check Valve Backflow Assembly (2 ½ -10 ) piece Valve Box and Cover (marked water) Copolymer meter box (pre-drilled for touch read) Concrete meter box Service Saddle (3/4 2 ) Polyethylene Adapter/Coupling Curb Stop (ball valve) (3/4-2 ) Corporation Stop (3/4-2 ) Butterfly Valve (4 & up) Fire Service Meter Turbine Water Meter (1 ½ -10 ) Compound Water Meter (2-8 ) Positive Displacement Water Meter (5/8-2 )
2 NOTE: PIPE FOR POTABLE WATER MUST BE COLORED BLUE DESCRIPTION: DR14, DR18, DR25 PVC PIPE North American Pipe Co. (NAPCO) N/A J-M Mfg. N/A Extrusion Technologies, Inc. N/A Diamond Pipe N/A Certainted N/A SEE NOTES ON DETAIL FOR AWWA REQUIREMENTS PVC PIPE, DR 14, 18, 25 (4 24 )
3 NOTE: ALL FIRE HYDRANTS SHALL BE FACTORY PAINTED FEDERAL SAFETY YELLOW. DESCRIPTION: FIRE HYDRANT. 5-1/4 Main Valve Clow Medallion F-2545 Mueller A-421 American Flow Control B84B Ref. specifications: Section VII, Sub-section FIRE HYDRANT Sept
4 DESCRIPTION: PE 3408, SDR-9, COPPER TUBE SIZE, POLYETHYLENE TUBING. 2 & Less Phillips Driscopipe 5100 * All polyethylene compression joints shall contain stainless steel insert stiffeners, such as Ford insert 52 or appropriate size. POLYETHYLINE TUBING, PE 3408, DR
5 NOTE: FOR SPECIFIC MODEL INFORMATION, SEE THE LIST OF APPROVED BACKFLOW PREVENTION ASSEMBLIES PUBLISHED BY THE UNIVERSITY OF SOUTHERN CALIFORNIA. DESCRIPTION: PRESSURE TYPE VACUUM BREAKER. ½ 2 Watts Wilkins 720A PRESSURE TYPE VACUUM BREAKER (1/2-2 )
6 NOTE: FOR SPECIFIC MODEL INFORMATION, SEE THE LIST OF APPROVED BACKFLOW PREVENTION ASSEMBLIES PUBLISHED BY THE UNIVERSITY OF SOUTHERN CALIFORNIA. DESCRIPTION: ATMOSPHERIC (NON-PRESSURE) TYPE VACUUM BREAKER. ¼ 2 Watts Wilkins 35 NON-PRESSURE TYPE VACUUM BREAKER (1/4-2 )
7 MANUAL NOTE: FOR SPECIFIC MODEL INFORMATION, SEE THE LIST OF APPROVED BACKFLOW PREVENTION ASSEMBLIES PUBLISHED BY THE UNIVERSITY OF SOUTHERN CALIFORNIA. DESCRIPTION: REDUCED PRESSURE PRINCIPLE ASSEMBLY. (BACKFLOW PREVENTER) ¾ 2 Ames Cla-Val Hersey/Grinnell Watts Wilkins 975XL 825Y BACKFLOW PREVENTER, RPZ ASSY. (34/ -2 ) Sept
8 MANUAL NOTE: FOR SPECIFIC MODEL INFORMATION, SEE THE LIST OF APPROVED BACKFLOW PREVENTION ASSEMBLIES PUBLISHED BY THE UNIVERSITY OF SOUTHERN CALIFORNIA. DESCRIPTION: DOUBLE CHECK VALVE DETECTOR ASSEMBLY. (WITH BY-PASS LOW FLOW METER) 2 ½ 10 Ames Cla-Val Hersey/Grinnell Watts Wilkins 950 DA DOUBLE CHECK VALVE DETECTOR ASSY. (21/2-10 )
9 MANUAL NOTE: FOR SPECIFIC MODEL INFORMATION, SEE THE LIST OF APPROVED BACKFLOW PREVENTION ASSEMBLIES PUBLISHED BY THE UNIVERSITY OF SOUTHERN CALIFORNIA. DESCRIPTION: DOUBLE CHECK VALVE DETECTOR ASSEMBLY. (WITH BY-PASS LOW FLOW METER) 2 ½ 10 Ames Cla-Val Hersey/Grinnell Watts Wilkins 950 DA DOUBLE CHECK VALVE BACKFLOW ASSY. (21/2-10)
10 NOTE: MUST BE OF DOMESTIC ORIGIN AND MUST HAVE BEEN CAST AND MACHINED IN THE UNITED STATES. NOTE: THE STANDARD 3-PIECE VALVE BOX (AS SHOWN) MAY ALSO BE USED FOR WASTEWATER FORCE MAIN AND RE-USE MAIN APPLICATIONS. DESCRIPTION: 3-PIECE VALVE BOX AND COVER. N/A Tyler Pipe 461-S OPELIKA Foundry 4905 (size 18) Note: Valve box cover must be marked for appropriate use, ie. water, sewer, reuse, etc. 3-PIECE VALVE BOX & COVER (MARKED WATER )
11 DESCRIPTION: COPOLYMER METER BOX. (PRE-DRILLED COVER FOR TOUCH READ) Standard Poly Plastic Centry 1015 Oversized Dexco DX R (metal) Dexco DX R Foundaries 200A Note: Illustration shown above is poly plastic with metal flip lid and cover predrilled for touch read applications. COPOLYMER METER BOX (PRE-DRILLED, TOUCH READ)
12 DESCRIPTION: CONCRETE METER BOX. * N/A Brooks Products 37 Series N/A Brooks Products 65 Series *Not included in Citrus County approved materials list CONCRETE METER BOX
13 NOTE: MODELS FOR PVC AND D.I. MAY DIFFER. DESCRIIPTION: SERVICE SADDLE. Stainless Band & Epoxy Coated 3/4 2 Smith Blair 391 JCM Industries 404 Romac Industries 202 Series Ford FC202 Note: Pre-sized saddles may be required for C900 PVC pipe. SERVICE SADDLE (3/4 2 )
14 DESCRIPTION: POLYETHYLENE ADAPTER COUPLING BRASS ½ 2 Ford McDonald Mueller Not included in Citrus County approved list of materials. POLYETHYLENE ADAPTER COUPLING
15 NOTE: ONLY FULL PORT VALVES ARE ALLOWED. DESCRIPTION: CURB STOP, BALL VALVE. BRASS 3/4 2 Ford Meter Box Company B11 Series (w/lockwing, FIPxFIP) Ford Meter Box Company B41 Series (w/lockwing) Mueller B20200 (w/lockwing, FIPxFIP) Mueller B25170 (w/lockwing) CURB STOP, BALL VALVE (3/4 2 )
16 NOTE:ONLY FULL PORT VALVES ARE ALLOWED. DESCRIPTION: CORPORATION STOP. BRASS 3/4 2 Ford Meter Box Company 1000 Series Mueller B Series CORPORATION STOP (3/4 2 )
17 NOTE: MECHANICAL JOINT SHOWN AS EXAMPLE. DESCRIPTION: BUTTERFLY VALVE. 4 & up M & H Valve 450 Pratt Valve N/A Mueller B3211 Note: Butterfly valves may be approved by the UD on a case by case basis only. BUTTERFLY VALVE (4 UP)
18 NOTE: THIS ILLUSTRATION IS NOT THE SCHLUMBERGER PROTECTUS III DESCRIPTION: FIRE SERVICE METER, U.S. GALLON REGISTER 4, 6, 8 and 10 Schlumberger Protectus III Provide by-pass meters as follows: 4 use 1 by-pass 6 use 1 ½ by-pass 8, 10 use 2 by-pass FIRE SERVICE METER
19 NOTE: THIS ILLUSTRATION IS NOT THE SCHLUMBERGER NEPTUNE HP. DESCRIPTION: TURBINE WATER METER, U.S. GALLONS REGISTER 1 ½ 10 Schlumberger Neptune HP Turbine water meters to be direct reading. TURBINE WATER METER ( 11/2 10 )
20 MANUAL NOTE: THIS ILLUSTRATION IS NOT THE SCHLUMBERGER NEPTUNE TRU/FLO DESCRIPTION: COMPOUND WATER METERS, U.S. GALLONS REGISTER 2 HP, 3, 4, 6 and 6 x 8 Schlumberger Neptune Tru/Flo Compound water meter to be direct reading. COMPOUND WATER METER (2 8 )
21 DESCRIPTION: POSITIVE DISPLACEMENT WATER METER, U.S. GALLONS REGISTER 5/8 2 Badger Varies Sensus SR Series Schlumberger Neptune T-10 Supply with touch read system as required by the UD. POSITIVE DISPLACEMENT WATER METER (5/8 2 )
APPROVED MATERIALS LIST SERVICE MATERIALS July 2017 **REVISED 12/6/17**
APPROVED MATERIALS LIST SERVICE MATERIALS July 2017 **REVISED 12/6/17** SIZE DESCRIPTION MANUFACTURER & MODEL NUMBER CORPORATION STOPS 1" MIP x GRIP Comp ball corp stop Ford: FB 1100-4Q McDonald: 74704-BQ
Approved. Vendor List
APPENDIX A Approved Vendor List Product Manufacturer Valves and Accessories Air Release Valves ARV Enclosures Gate Valves Gate Valves Tapping Valves Insert Valve ARI ARI D 040 2" only ARI D 040 2" only
List of Materials and Approved Manufacturers
List of Materials and Approved Manufacturers Revised April 2017 300 West Plant Street, Winter Garden, FL 34787 (407) 656-4111 www.wintergarden-fl.gov Water Distribution Please indicate your selection by
CITY OF SAN DIEGO PUBLIC UTILITIES DEPARTMENT APPROVED MATERIALS LIST TABLE OF CONTENTS
CITY OF SAN DIEGO PUBLIC UTILITIES DEPARTMENT TABLE OF CONTENTS SYSTEM Page A. Bronze Water Service Fittings.... 3 Corporation Stop, Curb Stop, Property Valve, Coupling, Compression Fittings, Adaptors,
APPENDIX A. List of Materials and Approved Manufacturers. Revised July 2018
APPENDIX A List of Materials and Approved Manufacturers Revised July 2018 Water Distribution Please indicate your selection by writing an x in the box alongside the item of your choice. A cut sheet is
List of Materials and Approved Manufacturers
List of Materials and Approved Manufacturers Revised April 2017 300 West Plant Street, Winter Garden, FL 34787 (407) 656-4111 www.wintergarden-fl.gov Water Distribution Please indicate your selection by
PUBLIC UTILITIES DEPARTMENT CITY OF SAN DIEGO APPROVED MATERIALS LIST FOR WATER STAN MEDINA DEPUTY DIRECTOR WATER OPERATIONS. u f! ASSISTANT DIRECTOR
PUBLIC UTILITIES DEPARTMENT CITY OF SAN DIEGO FOR WATER STAN MEDINA DEPUTY DIRECTOR WATER OPERATIONS DEPUTY DIRECTOR ENGINEERING & PROGRAM MANAGEMENT u f! u~~~ 7 STAN GRIFFITH ASSISTANT DIRECTOR DISTRIBUTION
Approved Large Meter & Water Construction Materials
Approved Large Meter & Water Construction Materials Jan 2019 Material List Index A B C D E F G H I J Page 2 Pages 2-3 Page 3 Page 3 Pages 3-4 Page 4 K L M N O P Q R S T Page 4 Pages 4-6 Page 6 Page 6 Page
MATERIAL SPECIFICATIONS AND BID PROPOSAL SHEET
CATEGORY 1: STEEL COUPLINGS 0 ¾" Steel Couplings (Smith-Blair #411-0501-003) 20 1" Steel Couplings (Smith-Blair #411-013201-003) 20 1¼" Steel Couplings (Smith-Blair #411-016601-003) 20 2" Steel Couplings
SECTION 400 WATER MATERIAL SPECIFICATIONS 400-2
SECTION 400 WATER MATERIAL SPECIFICATIONS 400-2 MATERIAL SPECIFICATION LIST WATER UTILITY General: 1. All manufacturers products listed are preferred. Others may be submitted to the OFS Engineering for
ALBEMARLE COUNTY SERVICE AUTHORITY WATER APPROVED PRODUCTS LIST Effective Date: February 9, 2017
ALBEMARLE COUNTY SERVICE AUTHORITY WATER APPROVED PRODUCTS LIST Effective Date: February 9, 2017 I. Water Pipe, Fittings & Appurtenances A. Ductile Iron Pipe & C.I. or D.I. Fittings 1. Griffin Pipe Products,
Service Materials. Service Materials. With Three Locations to Serve You: Avoca, NY 8125 Kanona Rd. Avoca, NY (607)
Service Materials Service Materials Rochester, NY 785 Beahan Rd. Rochester, NY 14624 (585) 436-9624 With Three Locations to Serve You: Avoca, NY 8125 Kanona Rd. Avoca, NY 14809 (607) 566-2214 Watertown,
COACHELLA VALLEY WATER DISTRICT Approved Materials List
DOMESTIC WATER A. COPPER TUBING a. 1-inch copper tubing, K-soft 1) Cerro 2) Mueller 3) Halstead 4) Cambridge Lee b. Factory Coated Copper Tubing Approved Manufacturer: 1) Kamco Aqua Shield c. 1½-inch or
SUB WATER DEPARTMENT STANDARD CONSTRUCTION SPECIFICATIONS TABLE OF CONTENTS SECTION WATER DISTRIBUTION VALVES
SUB WATER DEPARTMENT STANDARD CONSTRUCTION SPECIFICATIONS TABLE OF CONTENTS SECTION 33 12 16 WATER DISTRIBUTION VALVES PART 1 GENERAL... 2 1.1 Description... 2 1.2 Reference Specifications, Codes, and
Harlingen Water Works System Approved Products List For Subdivisions. January 11, 2005
Harlingen Water Works System Approved Products List For Subdivisions January 11, 2005 Revised March 24, 2016 Harlingen Water Works System Approved Products List for Subdivisions Table of Contents: 1. Valves
PIPE OUTSIDE DIAMETER GUIDE
June 7, 2018-1 PIPE OUTSIDE DIAMETER GUIDE PIPE OUTSIDE DIAMETER GUIDE - SMALL DIAMETER PIPE SIZES NOMINAL PIPE SIZES 1 /2" 3 /4" 1" 1 1 /4" 1 1 /2" 2" 2 1 /2" THIS O.D. GUIDE IS FOR YOUR CONVENIENCE &
Section G: Brass Service Materials
G 1 G 2 G 3 G 3.1 G 3.2 G 4 G 4.1 G 5 G 6 G 7 Inline Valves Straight Couplings Meter Setters (5/8" X 3/4" Meter) Meter Setters (1" Meter) Meter Setters (1 1/2"& 2 Meter) Dual Service U-Branch (5/8" X 3/4"
Water Inventory Items Bidder Price List
Water Inventory Items Bidder Price List # ASPA ITEM NO. DESCRIPTION MAKE/MODEL CAT/SPEC QTY UOM LAST UNIT PRICE EXTENDED PRICE Group 1:STANDARD BRASS FITTINGS 1 81460106 ELBOW, BRASS 2"X 45 DEGREE LEE
APPROVED VENDOR AND PRODUCT LISTING
APPROVED VENDOR AND PRODUCT LISTING September 2016 11900 East Terry Street Bonita Springs, FL 34135 (239) 992-0711 PVC Pipe North American Pipe C900, C905, SDR26 SDR35 not permitted Corporation Diamond
A. This Section includes the following domestic water piping specialties:
SECTION 221119 - DOMESTIC WATER PIPING SPECIALTIES PART 1 - GENERAL 1.1 SUMMARY A. This Section includes the following domestic water piping specialties: 1. Backflow preventers. 2. Water pressure-reducing
A. This Section includes the following domestic water piping specialties:
Page 221119-1 SECTION 221119 - PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections,
Yakima County Water Resource System Guidelines for Rural Water Meter Installations Revised 1/3/2018
Yakima County Water Resource System Guidelines for Rural Water Meter Installations Revised 1/3/2018 Steps for Installing Water Meters on Yakima County Water Resource System (YCWRS) Wells 1. Customer inquiries
SECTION GENERAL-DUTY VALVES FOR PLUMBING PIPING
SECTION 22 05 23 PART 1 - GENERAL 1.1 SUMMARY A. Work Included: 1. Valves, General 2. Gate Valves 3. Balancing Valves 4. Ball Valves 5. Swing Check Valves 6. Backflow Prevention Assemblies 7. Pressure
THE METROPOLITAN DISTRICT APPROVED MATERIALS
THE METROPOLITAN DISTRICT APPROVED MATERIALS All material must be manufactured in a North American Free Trade Agreement (NAFTA) country, specifically the United States (domestic), Canada or Mexico unless
COWETA COUNTY WATER & SEWERAGE AUTHORITY WATER SYSTEM EXPANSION. FOR FISCAL YEAR 2018; July 1, 2017 thru December 31, 2017
COWETA COUNTY WATER & SEWERAGE AUTHORITY WATER SYSTEM EXPANSION "MATERIALS ONLY" 2018 BI-ANNUAL ITEMS FOR FISCAL YEAR 2018; July 1, 2017 thru December 31, 2017 COWETA COUNTY WATER & SEWERAGE AUTHORITY
APPROVED VENDOR AND PRODUCT LISTING
APPROVED VENDOR AND PRODUCT LISTING January 2018 Bonita Springs Utilities, 11900 East Terry Street Bonita Springs, FL 34135 (239) 992-0711 Bonita Springs Utilities, PVC Pipe North American Pipe DR14 C900,
FORD ea S FORD ea FORD ea S FORD ea S FORD ea S FORD 27.
1 2 x 3/4 CC Brass Saddle FORD 15.93 ea S70-203 FORD 17.68 ea 570-203 2 2 x 1 CC Brass Saddle FORD 15.93 ea S70-204 FORD 17.68 ea S70-204 3 4 x 3/4 CC Brass Saddle FORD 24.74 ea S70-403 FORD 27.47 ea S70-403
Yellow Shading Depicts Recommended Vendor ACT PIPE & SUPPLY AGUAWORKS PIPE & SUPPLY, LLC EMMSA CO FERGUSON WATERWORKS
Yellow Shading Depicts Recommended Vendor Bid Opening Date: February 05, 2015 at 4:00 p.m. Location: Conference Room 1B (1st floor) McAllen City Hall Project: 02-15-SP04-176 SUPPLY CONTRACT FOR THE PURCHASE
GWE Street Expansion (Phase 2) LIST OF MATERIALS. Unit Qty Unit price Total. unit 3 $
1.0 Water distribution system Ductile cast iron pipe Ø150mm pre-insulated pipe (insulation thickness = 50 1.1 mm), Class 52 Tyton joints, conductivity stripe, (including insulation kit for m 540 $ joints)
1. All piping shall have flow arrows indicating direction of flow.
PART 1: GENERAL 1.01 Scope of Standards A. This design guidelines contained herein includes the requirements for systems, materials, fittings and valves utilized for piping systems at Texas State University.
CTS WATER SERVICE TUBING - BLACK
CTS WATER SERVICE TUBING - BLACK Section 1 Cts Water Service Tubing shall be PE 3408 Resin listed in PPI TR4, MSF Standard 14 and NSF Standard 61, AWWA C901, ASTM D 2737, Cell classification per ASTM D
BALL VALVES. Industry-Leading 300psi Low Lead Ball Valves
BALL VALVES Industry-Leading 300psi Low Lead Ball Valves Designed and Manufactured to Meet Your Needs 1 Lockwing Accepts bullet lock (when equipped on meter valve). 2 Stainless steel reinforced seat gaskets
PROJECT TITLE PROJECT NO: CONTRACT TITLE GRANT NO: UNIVERSITY OF CALIFORNIA, DAVIS CITY, CALIFORNIA
The following standard specification is intended to be edited according to the specifics of the project. Brackets [ ] and areas shaded in gray [e.g. format] indicate requirements that are optional depending
JEFFERSON UTILITIES 270 INDUSTRIAL BLVD. KEARNEYSVILLE, WV (304) STANDARDS AND SPECIFICATIONS
JEFFERSON UTILITIES 270 INDUSTRIAL BLVD. KEARNEYSVILLE, WV 25430 (304) 728-2077 STANDARDS AND SPECIFICATIONS FEBRUARY 28, 2018 1 TABLE OF CONTENTS GENERAL MATERIAL... 3 WATER... 5 DUCTILE IRON PIPE...
ROMAC INDUSTRIES, INC. WIDE RANGE RESTRAINT. RESTRAINED END CAP page 6-7 NOW AVAILABLE FOR HDPE PIPE NO STIFFENER REQUIRED
ROMAC INDUSTRIES, INC. WIDE RANGE RESTRAINT RESTRAINED COUPLING page 4-5 RESTRAINED END CAP page 6-7 RESTRAINED FLANGED COUPLING coming soon JUNE 2014 UPDATE NOW AVAILABLE FOR HDPE PIPE NO STIFFENER REQUIRED
PART IV APPROVED MATERIALS AND MANUFACTURERS LIST AND MATERIAL SPECIFICATIONS PRINCE GEORGE COUNTY, VIRGINIA
PART IV APPROVED MATERIALS AND MANUFACTURERS LIST AND MATERIAL SPECIFICATIONS PRINCE GEORGE COUNTY, VIRGINIA MAY 2008 1 THIS PAGE INTENTIONALLY LEFT BLANK 2 APPROVED MATERIALS AND MANUFACTURERS INTRODUCTION
Approved Product List
Albuquerque Bernalillo County Water Utility Authority P.O.Box 568 Albuquerque, New Mexico 87103 Water Utility Authority - Field Division Albuquerque Bernalillo County Water Utility Authority Approved Product
SECTION GENERAL-DUTY VALVES FOR HVAC PIPING. A. Contents of Division 23, HVAC and Division 01, General Requirements apply to this Section.
SECTION 23 05 23 PART 1 - GENERAL 1.1 SUMMARY A. Work Included: 1. Gate Valves 2. Balancing Valves 3. Ball Valves 4. Butterfly Valves 5. Swing Check Valves 1.2 RELATED SECTIONS A. Contents of Division
Precision is Central.
Precision is Central. As experts in pipe joining solutions, we know precision is vital to every fitting and how they are fused. We offer the most complete range of conventional fusion fittings, injection
PASSAIC COUNTY TECHNICAL INSTITUTE CCA 1422 NEW S.T.E.M. BUILDING 2017
SECTION 221119 - DOMESTIC WATER PIPING SPECIALTIES PART 1 - GENERAL 1.1 SUMMARY A. Section Includes: 1. Vacuum breakers. 2. Backflow preventers. 3. Water pressure-reducing valves. 4. Balancing valves.
Appendix A. APPROVED MATERIALS LIST (Capital & Developer Projects)
Appendix A APPROVED MATERIALS LIST (Capital & Developer Projects) UPDATED 01/05/2016 Eastern Municipal Water District Approved Materials List TABLE OF CONTENTS Purpose and General Notes 3 I. GENERAL 4
SECTION VIII. (Sub-section 430) Wastewater Valves and Appurtenances. 1. General thru Gate Valves thru 430-3
SECTION VIII (Sub-section 430) Wastewater Valves and Appurtenances Article Page 1. General 430-1 thru 430-2 2. Gate Valves 430-2 thru 430-3 3. Plug Valves 430-3 thru 430-4 4. Check Valves 430-4 5. Tapping
Approved Material List Summary of Revisions
Approved Material List Summary of Revisions March 3, 2014 Updates added to the Water Utilities Department Approved Material List: Add "Champion Controls Inc." to: PW 47 - Remote Telemetry Units (PLC) Type
Clampette Products NEW YORK TEXAS CALIFORNIA
Clampette Products NEW YORK TEXAS CALIFORNIA Standing For Quality For Over 45 Years MADE IN THE U.S.A. Clampette is a major United States manufacturer of stainless steel pipe repair products. We take great
NIAGARA FALLS WATER BOARD
NIAGARA FALLS WATER BOARD REQUEST FOR BIDS BID #W2014-04 Bids on items as specified herein will be accepted at City Hall until 11:00 A.M., and opened at 11:00 A.M. on June 30, 2014. All bids are subject
FACILITY WATER DISTRIBUTION Revised 4/30/ Plumbing Systems
SECTION 22 11 00 - FACILITY WATER DISTRIBUTION PART 1 - GENERAL 1.1 SUMMARY A. This Section Includes: 1. Domestic water piping, within 5 feet of building. 2. Domestic water piping, above grade. 3. Pressure
Golden State Water Company POTABLE WATER MATERIALS GUIDELINE
Air Release And Vacuum Relief Valve Air and Vacuum Enclosure Air and Vacuum Insulation Jacket (for areas subject to freezing weather) Backflow Preventer (Reduced Pressure Principle Type) Backflow Preventer
DWU APPROVED MATERIALS LIST FOR WATER & WASTEWATER CONSTRUCTION
APPROVED MATERIALS LIST FOR WATER & WASTEWATER CONSTRUCTION Unless otherwise specified in the plans and/or specifications, following materials can be considered for the project contingent upon approval
AWWA SWING CHECK VALVES. Engineering Creative Solutions for Fluid Systems Since 1901
AWWA SWING CHECK VALVES Engineering Creative Solutions for Fluid Systems Since 1901 TABLE OF CONTENTS AWWA SWING CHECK VALVE Series 8001 Lever & Weight or Spring...1 Series 9001 Lever & Weight or Spring...2
Whapmagoostui First Nation. Main access ("B" street) Residential expansion - Phase 1 option D LIST OF MATERIALS. Revision Art.
1.0 Water distribution system Ductile cast iron pipe Ø150mm pre-insulated pipe (insulation thickness = 1.1 50 mm), Class 52 Tyton joints, conductivity stripe, (including insulation kit m 780 $ for joints)
Clampette Products Global sourcing. National compliance. Local service.
Clampette Products C a l i f o r n i a T e x a s N e w Y o r k Patch Clamps Clampette is a United States manufacturer of stainless steel pipe repair clamps. We take great pride in the manufacturing and
PVC WELL CASING & FITTINGS 20 FT. BELL-END /8 SDR21 REDUCING COUPLINGS STEEL WELL CASING & FITTINGS
Pipe Pipe & Well Casing FT. BELL-END 0 7 293 2 2 29 27 23 " SCH0 -/2" SDR7 " SDR2 " SCH0 " SCH0 FT. BELL-END 37 32 30 29 2 " SCH0 -/2" SDR7 -/" DR27. PVC WELL CASING & FITTINGS FT. BELL-END 003 7 -/ SDR2
3. The working pressure shall be 145 psi and tested to 230 psi.
Revisions to Section 333313 (standards for ARI) D. Automatic Air Release Valves for Wastewater Systems All force mains shall have automatic air release valves installed as they are indicated on the plans.
VILLAGE OF SOUTH LEBANON, OHIO ORDINANCE NO
VILLAGE OF SOUTH LEBANON, OHIO ORDINANCE NO. 2018-17 AN ORDINANCE ADOPTING WARREN COUNTY WATER STANDARD DETAILS WITH VILLAGE MODIFICATIONS, AND TO DECLARE AN EMERGENCY. WHEREAS, the Warren County Board
Bylaw 3847, 2016 Adopted Mar 21, 2016 SCHEDULE R - LIST OF APPROVED MATERIALS
Bylaw 3847, 2016 Adopted Mar 21, 2016 SCHEDULE R - LIST OF APPROVED MATERIALS City of Cranbrook - Subdivision and Development Servicing Bylaw 3633, 2008 (Consolidated) LIST OF APPROVED MATERIALS SCHEDULE
NMSU FIRE DEPARTMENT FIRE PUMP ACCEPTANCE TEST
Date Documents Submitted: Log No.: File No.: Plan Examiner: Permit No.: Property Information Building Name: Building Address: Building Manager's Name: Building Manager's Phone: Fax: System Designer/Contractor
MADE IN THE USA BACKFLOW PREVENTERS
MADE IN THE USA BACKFLOW PREVENTERS TABLE OF CONTENTS Selection Guide........................................................................3 Double Check Valve (Series 40-100)......................................................4,5
CENTENNIAL PARK EXPANSION
2 working days CITY ELKO EXISTING LEGEND PROPOSED CENTENNIAL PARK EXPANSION SEET LIGHT POWER POLE ELECICAL BOX 1-800-227-2600 AVOID CUTTING UNDERGROUND UTILITIES WATER VALVE GAS VALVE FIRE HYDRANT OWNER/DEVELOPER:
Utilities Catalog. PC-U2008, February, 2008
Utilities Catalog PC-U2008, February, 2008 Tyler Utilities 11910 CR. 492 Tyler, Texas 75706 (800) 527-8478 Union Foundry Company Box 309 Anniston, Alabama 3602 (800) 226-7601 TABLE OF CONTENTS Item Page
CITY OF STANDARD SPECIFICATIONS
CITY OF Published May 4, 2016 CALIFORNIA Stephan Kiefer, Community Development Director Cheri Sheets, City Engineer CITY OF LIVERMORE 1052 South Livermore Avenue Livermore, CA 94550 4DEV0001.doc 03/12
ISSUE DATE JANUARY 1ST, 2008 SECTION 8 WATER (POTABLE-RECLAIMED)
ISSUE DATE JANUARY 1ST, 2008 SECTION 8 WATER (POTABLE-RECLAIMED) 3'-0" MIN. NOTE: AFTER BACTERIOLOGICAL SAMPLES PASS REMOVE: 1. TEMPORARY 1" PVC - SCH. 40 FIN GRADE 2. TEMPORARY 1" CORPORATION STOP 3.
BACKFLOW PREVENTION CATALOG
ouble Check etector Backflow Preventers CA 4SG SERIES CA 4SG SERIES OUBLE CHECK ETECTOR ASSEMBLY The Apollo CA 4SG Series ouble Check etector Assembly is designed to prevent contamination of the potable
SECTION VALVES PART 1 -GENERAL
SECTION 1571 0 VALVES PART 3- EXECUTION General Shut-off Valves Balancing Valves Drain Valves RELATED WORK Section 15430- Plumbing Specialties Section 15450- Plumbing Equipment PART 1 -GENERAL SCOPE This
Cam-Lock 111, 120 Joint Restraints Patent Pending
111, 120 Joint Restraints The Next Generation Joint Restraint Technology Smith-Blair Cam-Lock joint restraint products provide a fast and economical means restraining mechanical joint water and wastewater
SHARKBITE INSTALLATION GUIDE
SHARKBITE INSTALLATION GUIDE THE TOTAL PLUMBING SOLUTION CUT: Cut the pipe square removing rough edges and debris. Mark the pipe to the correct insertion depth. PUSH: Push pipe and fitting together up
1. Potable Water Blue, Tan (Frazee Travatan, Color No. 213), or Safety Yellow 2. Recycled Water Magenta 3. Sewer/Wastewater - Green
UPDATE LOG FOR APPROVED MATERIALS LIST Date Item(s) Changed Page # 7/1/17 APPROVED MATERIALS LIST APPENDIX A IV. Paint E. Colors 8 1. Potable Water Blue, Tan (Frazee Travatan, Color No. 213), or Safety
Ford Service Saddles and Tapping Sleeves
DQS Inc. Section AA 09/2017 THE FORD METER BOX COMPANY, INC. CERTIFIED TO ISO 9001:2015 10004466 Ford Service Saddles and Tapping Sleeves Contents Recommended Product Application *Steel *C900/909*** Cast
Standards for Design and Construction
Standards for Design and Construction Of Water, Wastewater, Fiber optics and Reclaimed Water Facilities For Pasco County Utilities Department Revised: March 2018 Board of County Commissioners: Kathryn
The Ford Meter Box Company Western Canada Regional Distribution Centre Stocked Items
The Ford Meter Box Company Western Canada Regional Distribution Centre Stocked Items Item Number A13 NL A34 NL B11 333 NL B11 444 NL B11 555 NL B11 666 NL B11 777 NL B11 777SW NL B44 333 Q NL B44 444 Q
ALPHA Wide Range Restrained Joint
ROMAC INDUSTRIES, INC. 1-800-426-9341 www.romac.com MADE IN U.S.A. January 8, 2015 ALPHA Wide Range Restrained Joint WIDE RANGE RESTRAINED JOINT Wide covers DI through IPS PVC pipe diameters without having
ISO RESILIENT WEDGE GATE VALVE. Engineering Creative Solutions for Fluid Systems Since 1901
ISO RESILIENT WEDGE GATE VALVE Engineering Creative Solutions for Fluid Systems Since 1901 TABLE OF CONTENTS ISO RESILIENT WEDGE GATE VALVE Scope of Line...1 Features and Benefits...1 Suggested Specification...2
D-26. Combination Air Valve for Wastewater. Description. Applications. Operation. Main Features
D26.SWG.CAT.ENG0 D-26 Wastewater Combination Air Valve for Wastewater Description The D-26 Combination Air Valve combines an air & vacuum component and an air release component in a single body. The valve
SECTION VALVES AND OPERATORS
SECTION 15200 VALVES AND OPERATORS PART 1 - GENERAL 1.1 SUBMITTALS A. Shop Drawings: 1. Product data sheets for make and model. 2. Complete catalog information, descriptive literature, specifications,
PRICES EFFECTIVE JULY 1, 2017 (REPLACES CATALOG DATED, APRIL 30, 2012)
PRICES EFFECTIVE JULY 1, 2017 (REPLACES CATALOG DATED, APRIL 30, 2012) REPAIR CLAMPS COUPLINGS SERVICE SADDLES SEWER PRODUCTS TAPPING SLEEVES RESTRAINT SYSTEMS HDPE PIPE PRODUCTS DRILLING & TAPPING EQUIPMENT
WATERWORKS. Water Main Pipe & Fittings Water Main Valves
WATERWORKS PA G E S 5 0 5-5 2 8 INDEX PAGES Fabric & Silt Fence Repair Clamps Fire Hydrants Drilling Machines Service Fittings & Saddles Storm Sewer Pipe & Fittings Tap Sleeves Valve Box Materials Curb
Proposition 65 Warning This product contains chemicals known to the State of California to cause cancer or birth defects or other reproductive harm.
Model RPHBM Hydrant Backflow Meter Installation Testing Maintenance Instructions CAUTION: Installation of Backflow Preventers must be performed by qualified, licensed personnel. The installer should be
TABLE OF CONTENTS. Pipe Diameter Chart (Reference Only)..50 Extensions 38,40,42,44
TABLE OF CONTENTS Item Page Item Page ANSI/AWWA Compact & Full Body Pipe Fittings: Product Submittals and Installation: Mechanical & Flange Joint C153. 3-9 20U Protective Fusion Bonded Epoxy....5,5 Mechanical
Awide choice of devices
Chapter Four Methods and Devices for the Prevention of Backflow and Back-Siphonage Awide choice of devices exists that can be used to prevent backsiphonage and backpressure from adding contaminated fluids
2014 Utilities Division Year End Report Mission Statement:
2014 Utilities Division Year End Report Mission Statement: The primary responsibility of this Division is to supply the Borough of Chatham with the production, treatment, and storage of clean safe drinking
PHONE All prices effective JULY 1st, 2018 FAX A.C. PIPE SHELL CUTTERS PART # PRODUCT DESCRIPTION LIST LBS.
A.C. PIPE SHELL CUTTERS ACWL-100 1" shell cutter for AC (1/8" undersize) $ 159.44 0.5 ACWL-112 1-1/2" shell cutter for AC (1/8" undersize) $ 178.10 0.7 ACWL-200 2" shell cutter for AC (1/8" undersize)
Compression Fittings & Valves. Make the connection
Compression Fittings & Valves Make the connection Make the Connection with Compression Fittings, Valves, and Municipal Stops Make the connection with Philmac fittings. The versatile Philmac fitting system
INSTALLATION, OPERATION, AND MAINTENANCE MANUAL
INSTALLATION, OPERATION, AND MAINTENANCE MANUAL MODEL 4D-200 REDUCED PRESSURE PRINCIPLE (RPZ) & MODEL 4D-700 REDUCED PRESSURE DETECTOR ASSEMBLY (RPDA) BACKFLOW PREVENTERS 2 ½ 10 Conbraco Industries Inc.
Bid Summary Still Creek Wastewater Improvements Phase III City Job No. 411-D November 21, 2013
Bid Summary Still Creek Wastewater Improvements Phase III City Job No. 411-D4-1102 November 21, 2013 Doughtie Construction Co., Elliott Construction Dudley Construction Ltd. SUBTOTAL GENERAL ITEMS : $191,713.00
TEXAS UNITED PIPE INC.
TEXAS UNITED PIPE INC. CERTIFICATIONS SPECIFICATIONS & LOADING CHARTS For PVC Pipe Manufactured by Texas United Pipe Inc. P.O. Box 41067 11627 North Houston Rosslyn Houston, Texas 77241 SALES DEPARTMENT
Series 1500TD Bell Restraint Harness for Ductile Iron & C900 PVC Pipe Split Serrated Restraint Rings on Both Sides of the Bell
Series 00TD Bell Restraint Harness for Ductile Iron & C900 PVC Pipe Split Serrated Restraint Rings on Both Sides of the Bell Features and Applications: Restraint for Ductile Iron Pipe at Push- On Bells,
SHARKBITE INSTALLATION GUIDE
SHARKBITE INSTALLATION GUIDE THE TOTAL PLUMBING SOLUTION CUT: Cut the pipe square removing rough edges and debris. Mark the pipe to the correct insertion depth. PUSH: Push pipe and fitting together up
MAG- Backflow Preventers. MAG-BEECO Backflow Preventers deliver the highest level of performance, reliability, ease of use and save time and money.
MAG-BEECO deliver the highest level of performance, reliability, ease of use and save time and money. BENEFITS Peace of Mind MAG-BEECO Backflow valves pass the most rigorous, stringent test standards and
ADDENDUM NUMBER 2 (DATED May 7, 2012) TO THE CONTRACT DOCUMENTS AND CONSTRUCTION SPECIFICATIONS FOR WINDSOR CRUDE OIL TERMINAL
ADDENDUM NUMBER 2 (DATED May 7, 2012) TO THE CONTRACT DOCUMENTS AND CONSTRUCTION SPECIFICATIONS FOR WINDSOR CRUDE OIL TERMINAL From: Michael Brake, JR Engineering To: All Plan holders and/or Prospective
Backflow Preventers & Accessories
BEECO-2016 Go to beecobackflow.com for the most current product specification sheets. Backflow Preventers & Accessories LIT- 071 (Rev. 1) BEECO, Inc. 1321 West 119th Street, Chicago, Illinois 60643-5109,
516509_tabs 11/16/10 4:55 AM Page 1 FIRE HYDRANTS
Date Printed: November 2010 FIRE HYDRANTS or Tyton (6"),6, or 8" A EDDY FIRE HYDRANTS PARTS LIST WORKING PRESSURE: 150 PSI Note: Discontinued For Reference Only 350 PSI Working Pressure
SECTION 17 FIRE HYDRANT ASSEMBLIES General
SECTION 17 FIRE HYDRANT ASSEMBLIES 17-1.01 Scope 17-1 General This section describes the requirements for furnishing and installing as appurtenances to treated water mains. These requirements include the
AWWA, RESILIENT WEDGE GATE VALVES
Type AVK Ref. # Size Weight kg lb US $ Series 04 Wrench nut Ductile Iron Series 08 Handwheel for AVK gate valves series 45, 55, 65 and 66 With bolt and washer Grey cast iron Size 1"-30" Series 18/45/55/65/66
Mueller 300 Ball Valves Industry-leading 300psi low lead ball valves
Mueller 300 Ball Valves Industry-leading 300psi low lead ball valves Mueller 300 Ball Valves Your assurance of quality, dependable ball valves The ball valve designed for 300 psig working pressure Before
Copyright 2012 AIA MasterSpec Premium 06/12 PRODUCT MASTERSPEC LICENSED BY ARCOM TO CONBRACO, INC.
This Product MasterSpec Section is licensed by ARCOM to Apollo Flow Controls, Conbraco Industries, Inc ("Licensee").This Product MasterSpec Section modifies the original MasterSpec text and does not include
Ford Brass Saddles Style 101B and 202B
101B Ford Brass Saddles 101B and 202B 101B, 3/4" and 1" Taps 202B, 3/4" through 2" Taps Specifications Body - 85-5-5-5 brass alloy as per ASTM B62, ASTM B584 and AW WA C800. Threads may be FIP, AW WA,
PART 1 GENERAL 1.1 SCOPE OF WORK
SECTION 15110 PART 1 GENERAL 1.1 SCOPE OF WORK A. Furnish all labor, materials, equipment and incidentals required and install complete and ready for operation all valves and appurtenances as shown on
Steel Fabricated Coupling
Steel Fabricated Coupling Straight Connection IMPORTANT LINKS Click appropriate words to go to: Standard Limited Warranty Sales Terms & Conditions Freight Policy Returns Policy Corrosion & Product Selection
Pipe Repair Products. A complete selection for all types of pipe
Pipe Repair Products A complete selection for all types of pipe Mueller Service Saddles Manufactured and tested in accordance with ANSI/AWWA C800 & NSF 61 certified. Mueller service saddles, available
Vacuum Pumps & Parts. (800) Truck Center of Fort Worth, Inc North Freeway Fort Worth, TX.
RCF500 Rotary Vane Vacuum Pump RCF500 Specifications Approximate Air Flow Maximum Vacuum 320 CFM 28.5 Hg Power Required @ 27 Hg 23 BHP Pressures to 35 PSI Power required @ Max. Pressure 44 BHP Size of
Model 60 Meter-Master Flow Sensor
Rev. 3.1 Jun-11 Model 60 Meter-Master Flow Sensor Operating Instructions Contents 1. Introduction 1.1 About The Meter-Master Model 60... 1 1.2 Logger Cable Connection... 2 1.3 MM60 Factory Calibration...