WATERWORKS. Water Main Pipe & Fittings Water Main Valves

Transcription

1 WATERWORKS PA G E S INDEX PAGES Fabric & Silt Fence Repair Clamps Fire Hydrants Drilling Machines Service Fittings & Saddles Storm Sewer Pipe & Fittings Tap Sleeves Valve Box Materials Curb Box Water Main Pipe & Fittings Water Main Valves Index 531

2 Repair Clamps Smith Blair Inc Clamps 245 Redi-Clamp Bell Joint Leak Clamp 274 Smith-Blair 245 Redi-Clamps provide a fast, economical means of repair for pin holes, punctures or splits in pipes. They are precisely engineered to balanced design and accurately manufactured to produce a clamp with high performance characteristics. Part No. Size Range List SMI /2" IPS X 3" LONG.840" $13.33 SMI /2" IPS X 6" LONG.840" $24.62 SMI /4" IPS X 3" LONG 1.05" $13.59 SMI /4" IPS X 6" LONG 1.05" $25.37 SMI " IPS X 3" LONG 1.315" $14.86 SMI " IPS X 6" LONG 1.315" $27.00 SMI CLMP 1-1/4" IPS X 3" LONG 1.66" $15.27 SMI /4" IPS X 6" LONG 1.66" $28.45 SMI CLMP 1-1/2" IPS X 3" LONG 1.90" $16.40 SMI /2" IPS X 6" LONG 1.90" $30.90 SMI CLMP 2" IPS X 3" LONG 2.375" $17.91 SMI " IPS X 6" LONG 2.375" $32.45 SMI /2" IPS X 6" LONG 2.875" $44.82 SMI " IPS X 6" LONG 3.50" $47.46 SMI " IPS X 6" LONG 4.50" $50.55 SMI " IPS X 6" LONG 6.625" $ Full Circle Repair Clamps All Stainless Steel Smith-Blair Single Band Full Circle All Stainless Steel Clamps are an effective and economical means for fast, long lasting repair to damaged pipe of virtually any type up to 12 in diameter. The combination of premium grades of stainless steels used in Smith-Blair Clamps bring a degree of corrosion resistance to the marketplace never before available at popular prices. Part No. Size Range List SMI " IPS X 12-1/2" LONG $ SMI " DIPS X 12-1/2" LONG $ SMI " DIPS X 7-1/2" LONG $ SMI " DIPS X 12-1/2" LONG $ SMI " IPS X 12-1/2" LONG $ SMI6.7SSCLAMP 6" DIPS X 7-1/2" LONG $ SMI " DIPS X 12-1/2" LONG $ SMI " IPS X 12-1/2" LONG $ SMI " DIPS X 12-1/2" LONG $ SMI " DIPS X 12-1/2" LONG $ SMI " DIPS X 12-1/2" LONG $ Smith-Blair 274 Bell Joint Leak: Clamps provide a fast, economical means of sealing or preventing leaks in pipe with bell and spigot caulked or rubber ring joints. The design of the Kee-Lok gaskets and Bell- Spigot rings enables a single clamp to fit both caulked and rubber gasket joints on virtually all classes and brands of cast iron or ductile iron pipe within nominal sizes up to 36. They are also suitable for use on AWWA C-900 and C-905 PVC pipe thru 24 (longer bolts required) (DR 18 minimum wall thickness). Kee-Lok gaskets are available in sizes up to 24 in diameter only. (Excluding 14 diameter size.) Part No. Size Range List SMI4274 4" $ SMI6274 6" $ SMI8274 8" $ SMI " $ SMI " $ Couplings 411 Steel Couplings SB Standard Couplings designed with push on gaskets, are engineered to simplify installation and ensure a tight seal. Part No. Size Range List SMI IPS 3.50" $ SMI IPS 4.50" $ Fabric & Silt Fence SRW Fabrics Typar Fabric Non-woven filter fabrics are used primarily for sub-surface drainage applications such as trench drains and blanket drains. They are also used under gabions for erosion control. EC8 is a heavy-duty erosion control fabric. GC3 is a woven, commercial grade ground cover with 12" planting stripes. SS5 is a woven, reinforcement material for under patios, driveways and roadways. Part No. Item Size List TYPAR3X X 300 $89.82 TYP3X X 300 $83.10 TYP X 300 $ TYP4X X 300 $0.85 TYP X 300 $ TYP5X X 300 $0.85 TYP6X300200SQ X 300 $ TYP6X X 300 $0.85 TYP X 300 $ TYP12X /2 X 300 $0.88 TYP /2 X 300 $ TYP12X300420SQ /2 X 300 $ WATERWORKS The Midwest's Premier Distributor Since

3 Fabric & Silt Fence SRW Fabrics Silt Fence Part No. Item List MIRSILTFENCE 100 Roll $0.59 Fire Hydrants American Flow Control Hydrant All-bronze drain Travel stop nut located in top of hydrant Easy 360 rotation of nozzle section 250 p.s.i.g. working pressure rating Shell tested at 500 p.s.i.g. Sealed lubrication chamber More than 30 years of continuous parts interchangeability Ductile iron nozzle section, upper & lower stand pipes & hydrant base Bronze-to-bronze seating Bronze cross arm AFCWB /2 Bury $3, AFCWB677RED 7 Bury $3, AFCWB /2 Bury $3, AFCWB678 8 Bury $3, AFCK528 Traffic Flange Repair Kit $ Mueller Company Hydrant MUEA /2 Bury $3, MUEA Bury $3, A /2 Bury $3, A423 8 Bury $3, Mueller Company Hydrant Extension Kit Extension Kit consists of: 1 Stem 1 Barrel 1 Stainless steel extension stem coupling 1 Extension flange 1 Bonnet/Upper barrel O-ring 3 Gaskets 1 Safety Flange O-ring 8 Bolts and Nuts 2 Clevis Pins 3 Cotter Pins 1 Instruction Sheet oz. hydrant lubricating oil MUEA3206EXT 6" Hydrant Extension $ MUEA " Hydrant Extension $ AFCA " Hydrant Extension $ MUEA " Hydrant Extension $ Safety Flange Repair Kit 1 safety flange 2 gaskets 8 safety flange bolts and nuts 1 safety flange O-ring 1 bonnet/upper barrel O-ring oz. hydrant lubricating oil 1 stainless steel safety stem coupling 2 clevis pins 3 cotter pin 1 instruction sheet Part No. Item List MUEA301 Hydrant Repair Kit $ WATERWORKS American Flow Control Hydrant Extension Kit WB67K5626 6" Hydrant Extension $ WB67K " Hydrant Extension $ WB67K " Hydrant Extension $ WB67K " Hydrant Extension $ The Midwest's Premier Distributor Since

4 Drilling Machines Mueller Company Drilling & Tapping Machines Drilling Machine Part No. Size OD X OD List FER " X 5" 5.62" X 5.62" $15.24 FER " X 4" 6.38" X 4.38" $22.62 FER " X 5" 6.38" X 5.62" $23.94 FER " X 6" 6.38" X 6.38" $20.80 FER " X 6" 8.50" X 6.38" $35.77 FER " X 8" 8.50" X 8.50" $32.00 FER " X 10" 10.60" X 10.60" $44.48 FER " X 12" 12.60" X 12.60" $51.90 FER " X 15" 15.40" X 15.40" $84.63 FER " X 18" 18.90" X 18.90" $ Clay to Plastic Part No. Item List MUED5 For 1-1/2" - 2" taps $3, MUEB101 For 3/4" & 1" taps $5, Electric Power Operator Part No. Item List MUEH603 For B101 & D5 Machines $6, Flexible Pipe Connections DFW Saddle Flexible Saddle Part No. Size OD X OD List FER " X 4" 5.25" X 4.38" $9.73 FER " X 4" 7.38" X 4.38" $22.62 FER " X 6" 7.38" X 6.38" $20.80 FER " X 6" 9.65" X 6.38" $35.77 FER " X 8" 9.65" X 9.65" $32.00 FER " X 10" 12.73" X 10.60" $44.48 FER " X 12" 14.38" X 12.60" $51.90 FER " X 15" 17.85" X 15.40" $89.02 Concrete to Plastic Part No. Item List DFW4Y 4" Rubber Saddle Wye $77.27 DFW6Y 6" Rubber Saddle Wye $98.06 DFW4T 4" Rubber Saddle Tee $62.09 DFW6T 6" Rubber Saddle Tee $82.10 Fernco Coupling Cast Iron to Plastic Part No. Size OD X OD List FER " X 4" 5.62" X 4.38" $9.73 FER " X 6" 7.80" X 6.38" $21.31 FER " X 8" 10.25" X 8.50" $32.00 FER " X 10" 12.60" X 10.60" $44.48 FER " X 12" 16.40" X 12.50" $51.90 FER " X 15" 19.75" X 15.50" $ Manhole adaptors Part No. Size OD X OD List FER /4" X 1-1/4" 1.65" X 1.65" $5.00 FER /2" X 1-1/4" 1.90" X 1.65" $5.54 FER /2" X 1-1/2" 1.90" X 1.90" $5.35 FER " X 1-1/2" 2.40" X 1.90" $6.07 FER " X 2" 2.40" X 2.40" $5.75 FER " X 2" 3.38" X 2.40" $7.18 FER " X 3" 3.38" X 3.38" $7.77 FER " X 1-1/2" 4.38" X 1.90" $13.67 FER " X 2" 4.38" X 2.40" $12.56 FER " X 3" 4.38" X 3.38" $10.47 FER " X 4" 4.50" X 4.50" $9.73 FER " X 4" 5.62" X 4.38" $16.94 Concrete Manhole Adapters help eliminate leaks around pipe entering manhole walls, yet are flexible enough to permit lateral pipe movement without destroying seal integrity. It is particularly useful for pipe to which concrete will not adhere, such as plastic pipe. FER4CMA 4" $11.23 FER6CMA 6" $19.51 FER8CMA 8" $25.83 FER10CMA 10" $32.03 FER12CMA 12" $36.32 WATERWORKS The Midwest's Premier Distributor Since

5 Flexible Pipe Connections Fernco Coupling Test Caps Part No. Size Range List SMI " DIPS X 7-1/2" LONG X 1" CC 8.99" " $ Couplings 441 Cast Straight and Transition Couplings Qwik Caps offer a quick, easy way to cap pipe ends, cleanouts and open test pipes. Made of flexible PVC, they're suitable for above-ground or underground use, on cast iron, steel, copper or plastic piping. FERQC /2" $4.30 FERQC102 2" $4.48 FERQC103 3" $5.83 FERQC104 4" $6.68 FERQC106 6" $16.68 Repair Clamps Smith Blair Inc Clamps 226 Full Circle Repair Clamps Single Band Smith-Blair 225 Single Band Full Circle Clamps provide a fast, economical means of coupling or repairing full circumferential breaks, holes, cracks or other types of damage to cast iron, steel and other types of pipe. The clamps have a built-in O. D. range which enables each clamp to fit several pipe outside diameters within its nominal pipe size range. Part No. Item Range List SMI2441 IPS COUPLING 2.34" " $75.25 SMI212CPL1441 IPS COUPLING 2.65" " $97.27 SMI IPS COUPLING 3.44" " $ SMI3441 DIPS COUPLING 3.80" " $ SMI IPS COUPLING 4.22" " $ SMI4441 DIPS COUPLING 4.80" " $ SMI4441SS DIPS COUPLING W/SS BOLTS 4.80" " $ SMI6CLP441 IPS COUPLING 6.28" " $ SMI6441 DIPS COUPLING 6.90" " $ SMI6441SS DIPS COUPLING W/SS BOLTS 6.90" " $ SMI IPS COUPLING 8.40" " $ SMI8441 DIPS COUPLING 9.05" " $ SMI8441SS DIPS COUPLING W/SS BOLTS 9.05" " $ SMI10441 DIPS COUPLING 11.10" " $ SMI10441SS DIPS COUPLING W/SS BOLTS 11.10" " $ SMI12CPL441 DIPS COUPLING 13.20" " $ SMI16441 DIPS COUPLING 17.40" " $ Quantum Coupling Wide-Range WATERWORKS Part No. Size Range List SMI " IPS X 12-1/2" LONG 2.35" " $ SMI " IPS X 12-1/2" LONG 3.73" " $ SMI " DIPS X 12-1/2" LONG 4.74" " $ SMI " DIPS X 12-1/2" LONG 6.84" " $ SMI " DIPS X 12-1/2" LONG 8.99" " $ SMI " DIPS X 12-1/2" LONG 11.04" " $ SMI " DIPS X 12-1/2" LONG 13.10" " $ Tapped Full Circle Repair Clamps Double Band Smith-Blair 235 Double Band Full Circle Clamp provides a fast, economical method of repairing damaged or broken pipe at broken or torn out service connections, or branch lines. The repairs can be made and the service connection or branch line restored in one operation. They can also be used for new installations of service connections or branch lines. Part No. Size Range List SMI " IPS X 7-1/2" LONG X 3/4" CC 4.44" " $ SMI " IPS X 7-1/2" LONG X 1" CC 4.44" " $ SMI " DIPS X 7-1/2" LONG X 3/4"CC 6.84" " $ SMI " DIPS X 7-1/2" LONG X 1"CC 6.84" " $ SMI " DIPS X 7-1/2" LONG X 3/4"CC 8.99" " $ Part No. Item Range List SMI3461 IPS COUPLING W/SS BOLTS 3.46" " $ SMI4QUANTUM IPS/DIPS COUPLING 4.46" " $ SMI6461 IPS COUPLING W/SS BOLTS 6.54" " $ SMI6QUANTUM IPS/DIPS COUPLING 6.54" " $ SMI8QUANTUM IPS/DIPS COUPLING 8.54" " $ SMI12QUANTUM IPS/DIPS COUPLING 12.75" " $ Sanitary Sewer Pipe & Fittings GPK Gasketed Sewer Fittings SDR35 Gasketed Sewer Fittings Part No. Item List PSG22P 4 BXB 22-1/2 BEND SDR35 $12.04 PSGS22P 4 BXS 22-1/2 BEND SDR35 $11.38 PSG22U 6 BXB 22-1/2 BEND SDR35 $23.05 PSGS22U 6 BXS 22-1/2 BEND SDR35 $ The Midwest's Premier Distributor Since

6 Sanitary Sewer Pipe & Fittings GPK Gasketed Sewer Fittings SDR35 Gasketed Sewer Fittings Part No. Item List PSG22X 8 BXB 22-1/2 BEND SDR35 $71.79 JMP8RT22STL 8 BXS 22-1/2 BEND SDR35 $36.63 JMP10RT22L 10 BXB 22-1/2 BEND SDR35 $ PSG BXB 22-1/2 BEND SDR35 $ JMP15RT22L 15 BXB 22-1/2 BEND SDR35 $ PSG45P 4 BXB 45 BEND SDR35 $12.04 PSGS45P 4 BXS 45 BEND SDR35 $10.07 PSG45U 6 BXB 45 BEND SDR35 $22.77 PSGS45U 6 BXS 45 BEND SDR35 $20.16 PSG45X 8 BXB 45 BEND SDR35 $71.17 PSGS45X 8 BXS 45 BEND SDR35 $67.99 PSG BXB 45 BEND SDR35 $ JMP10RT45STL 10 BXS 45 BEND SDR35 $56.37 PSG BXB 45 BEND SDR35 $ JMP1512T45L 15 BXB 45 BEND SDR35 $ PSG90P 4 BXB 90 BEND SDR35 $15.76 PSG90U 6 BXB 90 BEND SDR35 $29.00 PSG90X 8 BXB 90 BEND SDR35 $80.20 PSG BXB 90 BEND SDR35 $ PSG BXB 90 BEND SDR35 $ JMP15RTL 15 BXB 90 BEND SDR35 $ PSGYP 4 BXBXB WYE SDR35 $21.60 PSGYUUP 6X4 BXBXB WYE SDR35 $43.81 PSGYU 6 BXBXB WYE SDR35 $49.60 PSGYXXP 8X4 BXBXB WYE SDR35 $65.35 PSGXXXU 8X6 BXBXB WYE SDR35 $80.17 PSGYX 8 BXBXB WYE SDR35 $ PSGY1010P 10X4 BXBXB WYE SDR35 $ PSGY1010U 10X6 BXBXB WYE SDR35 $ JMP12.4RTY 12X4 BXBXB WYE SDR35 $ JMP12.6RTY 12X6 BXBXB WYE SDR35 $ JMP15.6RTY 15X6 BXBXB WYE SDR35 $ JMP12.8RTY 12X8 BXBXB WYE SDR35 $ PSGY BXBXB WYE SDR35 $ JMP15RTY 15 BXBXB WYE SDR35 $ PSGTP 4 BXBXB TEE SDR35 $20.31 PSGTUP 6X4 BXBXB TEE SDR35 $42.54 PSGTU 6 BXBXB TEE SDR35 $43.49 JMP8.6RTT 8X6 BXBXB TEE SDR35 $33.05 PSGTX 8 BXBXB TEE SDR35 $96.49 PSGT10 10 BXBXB TEE SDR35 $ JMP15RTT 15 BXBXB TEE SDR35 $ PSGBUP 6X4 BXS REDUCER SDR35 $22.53 PSGBXP 8X4 BXS REDUCER SDR35 $61.54 PSGBXU 8X6 BXS REDUCER SDR35 $68.94 JMP10.6RTR 10X6 BXS REDUCER SDR35 $ JMP10.8RTR 10X8 BXS REDUCER SDR35 $ JMP12.6RTR 12X6 BXS REDUCER SDR35 $63.06 JMP12.8RTR 12X8 BXS REDUCER SDR35 $83.19 PSGCAPP 4 GASKETED CAP $8.08 PSGCAPU 6 GASKETED CAP $15.16 PSGCAPX 8" GASKETED CAP $40.92 PSSCAPP 4 SDR35 SW CAP $2.35 PSSCAPU 6 SDR35 SW CAP $8.69 PSSCAPX 8 SDR35 SW CAP $31.70 PSSCAP10 10 SDR35 SW CAP $ PSSCAP12 12 SDR35 SW CAP $ PSGRCP 4 BXB REPAIR COUPLING $15.48 PSGRCU 6 BXB REPAIR COUPLING $30.91 PSGRCX 8 BXB REPAIR COUPLING $52.50 PSGRC10 10 BXB REPAIR COUPLING $ JM Manufacturing/Freedom Gasketed Sewer Pipe SDR26 Sewer Heavy Wall Sewer Pipe SDR26HWSPP14 4" X 14 LONG $2.73 SDR26HWSPU14 6" X 14 LONG $5.71 SDR26HWSPX14 8" X 14 LONG $10.29 SDR26HWSP " X 14 LONG $16.18 SDR26HWSP " X 13 LONG $23.05 SDR26HWSP " X 13 LONG $34.53 SDR35 Sewer Pipe SDR35GPP14 4" X 14 LONG $2.04 SDR35GPU14 6" X 14 LONG $4.30 SDR35GPX14 8" X 14 LONG $7.75 SDR35GP " X 14 LONG $12.14 SDR35GP " X 14 LONG $17.44 SDR35GP " X 14 LONG $25.93 SDR35GP " X 14 LONG $50.80 SDR35GP " X 14 LONG $ SDR35GP " X 14 LONG $71.66 Service Fittings & Saddles AY McDonald Mfg Co Corporation Stops Plug Style Valves AYM470122F 3/4" $49.91 AYM470122G 1" $75.52 AYM470122H 1-1/4" $ WATERWORKS The Midwest's Premier Distributor Since

7 Service Fittings & Saddles AY McDonald Mfg Co Corporation Stops Ball Style Valves Plug Style Valves 4701Q B AYM4701QG 1" $ All cast brass conforms to AWWA Standard C (ASTM B-62, UNS C ). Throughway dimensions shall be no smaller than the nominal size of the valve. Valves are designed so they can be installed under pressure with standard tapping and drilling machine and insertion tools. Threads conform to current AWWA C standard. Body design includes heavy wrench flats for proper installation. Blowout proof cap and stem design. Brass Teflon coated (PTFE) ball for use in potable water systems. Buna-N or EPDM rubber seals held and sealed in place with adhesive. Rectangular operating head will be aligned such that the long side will indicate the direction of flow. Operating head is equipped with a BUNA-N or EPDM o-ring seal. 300 PSIG water working pressure. 360 degree?rotation. Flare tube nut has large hex wrenching surfaces and long tube support body. Compression type bodies include internal pipe stop. Compression assemblies include one or more of the following: BUNA- N or EPDM rubber sealing gasket, imbedded electrical conduction spring, stainless steel gripping ring or stainless steel set screw. Designed for use with potable water. AYM4701B22F 3/4" $72.10 AYM4701B22G 1" $94.83 AYM4701B22J 1-1/2" $ AYM4701B22K 3/4" $ AYM4704B22J 1-1/2" $ AYM4704B22K 2" $ BQ AYM470422H 1-1/4" $ Curb and Valve Boxes Arch Pattern Erie Pattern 1 Upper section, compete with shut-off rod (rod is 18 shorter than maximum extended curb box length) 5601L Lid 2 hole Erie pattern, threaded 1 Use with regular pattern inverted plug curb stops ½, 5/8, ¾, 1 Use with regular pattern ball valves 5/8, ¾, 1 (ball size) AYM5601LRW 7 $81.91 AYM85601L 8 $ WATERWORKS AYM4701BQF 3/4" $72.10 AYM4701BQG 1" $94.83 AYM4701BQJ 1-1/2" $ AYM4701BQK 2" $ AYM4704BQJ 1-1/2" $ AYM4704BQK 2" $ Erie Pattern 1 Upper section, compete with shut-off rod (rod is 18 shorter than maximum extended curb box length) 5601L Lid 2 hole Erie pattern, threaded 1 Use with regular pattern inverted plug curb stops 1 ¼, 1 ½, 2 Use with regular pattern ball valves 1 ½, 2 (ball size) AYM5603LRW 7 $ The Midwest's Premier Distributor Since

8 Service Fittings & Saddles AY McDonald Mfg Co Curb and Valve Boxes Minneapolis Pattern Shut-Off Rods and Accessories 304B 5610 AYM304BK 2 $66.15 AYM304BM 3 $66.15 AYM304BP 4 $ Erie Pattern 1 Upper section, compete with shut-off rod (rod is 18 shorter than maximum extended curb box length) 5607L Lid 1 pentagon plug in lid Use with inverted plug type curb stops ½, 5/8, ¾ Use with ball valve curb stops ¾, 1 (ball size) AYM5610W 7 tapt 1-1/2" rod $ K 304K: Pentagon Key Fits 5607L, 5614L, 5623L, 5624L and 5627L lids Part No. List AYM304K $ L 5614 Erie Pattern 1 1/4 Upper section, shut-off rod available, but not furnished 5614L Lid with 1 ¼ pentagon plug in lid Use with inverted plug type curb stops ½, 5/8, ¾ Use with ball valve curb stops ¾, 1 (ball size) AYM5614W 7 tapt 1-1/2" $95.51 AYM5614X 8 tapt 1-1/2" $ L: Tapped 1 ¼ ; with 1 ¼ brass pentagon plug (5614BP 1 ¼ ). Word WATER in raised letters. Part No. List AYM5614L $ /4 Upper section, shut-off rod available, but not furnished 5614L Lid with 1 ¼ pentagon plug in lid Use with inverted plug type curb stops 1 Use with ball valve curb stops 1 ½, 2 (ball size) Available with Reducing Bushing 2 MIP x 1 ½ FIP (add WV to model number) AYM5615U 6 tapt 2" $88.59 AYM5615W 7 tapt 2" $61.69 AYM5615X 8 tapt 2" $ AYM " $28.00 WATERWORKS The Midwest's Premier Distributor Since

9 Service Fittings & Saddles AY McDonald Mfg Co Curb Stops Minneapolis Pattern Ball Valves PSIG Water Fittings & Couplings Stainless Steel Inserts PE Pipe AYM610422F 3/4" $ AYM610422G 1" $ AYM610422HGH 1-1/4" $ AYM610422J 1-1/2" $ AYM610422K 2" $ Q For use with copper tube size polyethylene. Type 304 Stainless Steel. Flare and beveled ends for proper installation. Designed for use with potable water. AYM6133TF 3/4" $3.45 AYM6133TG 1" $3.70 AYM6133TH 1-1/4" $4.50 AYM6133TJ 1-1/2" $5.07 AYM6133TK 2" $5.07 Straight Couplings 4753 AYM6104QF 3/4" $ AYM6104QG 1" $ AYM6104QJ 1-1/2" $ AYM6104QK 2" $ All cast brass conforms to latest AWWA Standard C800 (ASTM B-62, UNS C ). Body design provides large hexagonal or octagonal wrench flats for proper installation. Flare tube nut has large hex wrenching surfaces and long tube support body. Designed for use with above or underground potable water tubing. AYM4753FG 3/4" X 1" $22.86 AYM4753GF 1" X 3/4" $30.31 AYM4753H 1-1/4" $51.71 AYM6105F 3/4" $85.80 AYM6105G 1" $ AYM6105HJH 1-1/4" $ AYM6105J 1-1/2" $ AYM6105K 2" $ Straight Couplings - One End Male National Pipe Thread 4753 WATERWORKS AYM4753F 3/4" $19.87 AYM4753G 1" $28.38 AYM4753J 1-1/2" $80.03 AYM4753K 2" $ The Midwest's Premier Distributor Since

10 Service Fittings & Saddles AY McDonald Mfg Co Fittings & Couplings Straight Couplings - One End Male National Pipe Thread Straight Couplings All cast brass conforms to AWWA Standard C800 (ASTM B-62, UNS C ). Body design includes heavy wrench flats for proper installation. Materials meet or exceed AWWA Standard C-800. Compression type bodies include internal pipe stop. Compression assembly includes EPDM rubber sealing gasket and stainless steel set screw. Designed for use with above or below ground potable water. AYM475422F 3/4" $23.49 AYM475422J 1-1/2" $84.80 AYM475422K 2" $ AYM475322F 3/4" $22.34 AYM475322G 1" $26.47 AYM475322H 1-1/4" $46.27 AYM475322J 1-1/2" $66.30 AYM475322L 2" $ Q Straight Couplings - One End Female National Pipe Thread 4754Q AYM4754QF 3/4" $23.49 AYM4754QFG 3/4" X 1" $27.99 AYM4754QG 1" $31.88 AYM4754QH 1-1/4" $53.23 AYM4754QJ 1-1/2" $84.80 Straight Couplings 4754Q AYM4753QF 3/4" $22.34 AYM4753QFG 3/4" X 1" $24.40 AYM4753QGF 1" X 3/4" $24.74 AYM4753QG 1" $26.47 AYM4753QH 1-1/4" $46.27 AYM4753QJ 1-1/2" $66.30 AYM4753QK 2" $96.59 Straight Couplings - One End Female National Pipe Thread All cast brass conforms to AWWA Standard C (ASTM B-62, UNS C ). Body design provides large hexagonal or octagonal wrench flats for proper installation. Compression type bodies include internal pipe stop. Compression assemblies include one or more of the following: BUNA- N or EPDM rubber sealing gasket, imbedded electrical conduction spring, stainless steel gripping ring or stainless steel set screw. Designed for use with potable water. Materials meet or exceed A.W.W.A. standard C AYM4754QK 2" $ AYM475422G 1" $31.88 AYM475422H 1-1/4" $ AYM4758F 3/4" $25.09 AYM4758FG 3/4" X 1" $37.18 AYM4758G 1" $43.97 AYM4758H 1-1/4" $82.46 AYM4758J 1-1/2" $ AYM4758K 2" $ WATERWORKS The Midwest's Premier Distributor Since

11 Service Fittings & Saddles AY McDonald Mfg Co Fittings & Couplings Straight Couplings AYM4758Q55G 1" $40.42 Service Saddles AYM475822FG 3/4" X 1" $31.61 AYM475822F 3/4" $27.22 AYM475822G 1" $31.14 AYM475822H 1-1/4" $49.14 AYM475822J 1-1/2" $95.23 AYM475822K 2" $ AYM F 3/4" $30.12 AYM GF 1" X 3/4" $33.87 AYM G 1" $ Q Part No. Size Range List AYM3802KG 2" X 1" NPT OUTLET 2.38" $37.80 AYM3802MG 3" X 1" NPT OUTLET 3.50" $49.97 AYM3802PG 4" X 1" NPT OUTLET 4.50" $58.80 AYM3802UG 6" X 1" NPT OUTLET 6.63" $ All cast brass conforms to AWWA Standard C (ASTM B-62, UNS C ). Body design provides large hexagonal or octagonal wrench flats for proper installation. Compression assemblies include one or more of the following: BUNA- N or EPDM rubber sealing gasket, imbedded electrical conduction spring, stainless steel gripping ring or stainless steel set screw. Designed for use with potable water. Materials meet or exceed A.W.W.A. standard C AYM4758QF 3/4" $27.22 AYM4758QFG 3/4" X 1" $31.61 AYM4758QG 1" $31.14 AYM4758QH 1-1/4" $49.14 AYM4758QJ 1-1/2" $95.23 AYM4758QK 2" $ WATERWORKS 4758Q55 AYM4758Q55GF 1" X 3/4" $33.87 Part No. Size Range List AYM3825PG 4" X 1-1/2" CC OUTLET 4.74" " $ AYM3825PK 4" X 2" CC OUTLET 4.74" " $ AYM3825SG 6" X 1-1/2" CC OUTLET 6.84" " $ AYM3825SK 6" X 2" CC OUTLET 6.84" " $ AYM3825XG 8" X 1-1/2" CC OUTLET 8.99" " $ AYM3825XK 8" X 2" CC OUTLET 8.99" " $ AYM382510J 10" X 1-1/2" CC OUTLET 11.04" " $ The Midwest's Premier Distributor Since

12 Service Fittings & Saddles AY McDonald Mfg Co Service Saddles 3825 Part No. Size Range List AYM382510K 10" X 2" CC OUTLET 11.04" " $ AYM382512J 12" X 1-1/2" CC OUTLET 13.14" " $ AYM382512K 12" X 2" CC OUTLET 13.14" " $ Mueller Company Ball Corporation Valves B25000 MUE2H " $57.14 H15540 MUE34H /4" Brass Cap $31.00 Service Fittings Copper Flare Connection Optional Equipment H15540 Mueller 300 Ball Corporation Valve Inlet: AWWA taper (Mueller CC ) thread Outlet: Copper flare straight connection MUE1B " $82.37 MUE112B /2" $ MUE2B " $ B25008 MUE1H " Brass Cap $52.83 Copper Yokes Copper Meter Yokes - Basement Mueller 300 Ball Corporation Valve Inlet: AWWA taper (Mueller CC ) thread Outlet: Mueller 110 Conductive Compression Connection for CTS O.D. tubing MUE1B " $87.01 MUE112B " $ MUE2B " $ Copper Flare Tools and Miscellaneous Equipment Copper Flare Connection Optional Equipment MUE58H1412 5/8" $68.54 MUE58.34H1412 5/8" X 3/4" $69.38 MUE34H1412 3/4" $81.33 MUE1H412 1" $ End Connections for Copper Meter Yokes with Multi-Purpose Ends H15430 MUE34H /4" $8.72 MUE1H " $11.01 MUE112H /2" $30.62 Straight coupling; Multi-purpose thread x sweat-joint solder connection. MUE H /8" X 3/4" X 3/4" $14.88 WATERWORKS The Midwest's Premier Distributor Since

13 Service Fittings & Saddles Mueller Company Copper Yokes End Connections for Copper Meter Yokes with Multi-Purpose Ends H14223 Straight coupling Multi-purpose thread x copper flare or M.I.P. thread MUE H /8" X 3/4" X 3/4" $25.03 MUE1H " $27.38 H15000 Ground Key Corporation Valve Inlet: AWWA taper (MUELLER CC ) thread Outlet: Copper flare straight connection MUE58.34H /8" X 3/4" $48.15 MUE34H /4" $42.65 MUE1H " $65.10 MUE114H /4" $ MUE112H /2" $ MUE2H " $ H15008 Corporation Valves Corporation Valve Copper Flare Tools & Miscellaneous Ground Key Corporation Valve Inlet: AWWA taper (MUELLER CC ) thread Outlet: MUELLER 110 Conductive Compression Connection for CTS O.D. tubing MUE34H /4" $59.57 MUE1H " $75.74 MUE114H /4" $ MUE112H /2" $ MUE2H " $ MUE34H /4" $45.74 MUE1H " $69.27 H15028 Ground Key Design Corporation Valves H10003 Ground Key Corporation Valve Inlet: AWWA I.P. thread Outlet: MUELLER 110 Conductive Compression Connection for CTS O.D. tubing Ground Key Corporation Valve Inlet: AWWA taper (MUELLER CC ) thread Outlet: Increasing I.P. thread (outlet is one size larger than inlet) MUE34H /4" $45.74 MUE1H " $69.27 WATERWORKS MUE112H /2" $ MUE2H " $ The Midwest's Premier Distributor Since

14 Service Fittings & Saddles Mueller Company Corporation Valves Ground Key Design Corporation Valves Couplings Miscellaneous Meter Setting Equipment H9971 MUE58H /8" Fiber Gasket $0.20 MUE58.34H /8" X 3/4" Fiber Gasket $0.20 Ground Key Corporation Valve Inlet: AWWA taper (MUELLER CC ) thread Outlet: MUELLER Coupling thread Straight Meter Couplings MUE1H9971 1" $58.28 Ori-Corp Corporation Valves H15013 Straight meter coupling MIP x meter swivel nut* Machined inside and outside - nut drilled for wire seal MUE58.12H /8" X 1/2" $11.51 MUE58.34H /8" X 3/4" X 3/4" $12.73 MUE1H " $20.54 MUELLER ORI-CORP Corporation Valve Inlet: AWWA taper (MUELLER CC ) thread Outlet: MUELLER 110 Conductive Compression Connection for CTS O.D. tubing Curb Valves & Boxes Ball Curb Valves with Copper Flare and F.I.P. Connection B25154 MUE112H /2" $ MUE2H " $ H15023 Mueller 300 Ball Curb Valve Copper flare nut both ends Quarter turn check and Minneapolis thread top. This valve may be ordered with checkless 360 degree turn option by adding -3 to end of catalog number (B ). MUELLER ORI-CORP Corporation Valve Inlet: AWWA I.P. thread Outlet: MUELLER 110 Conductive Compression Connection for CTS O.D. tubing MUE112H /2" $ MUE2H " $ MUE34B /4" $ MUE1B " $ MUE112B /4" $ MUE2B " $ WATERWORKS The Midwest's Premier Distributor Since

15 Service Fittings & Saddles Mueller Company Curb Valves & Boxes Ball Curb Valves with Copper Flare and F.I.P. Connection B25204 Mueller 300 Ball Curb Valve Copper flare nut both ends. Quarter turn check. This valve may be ordered with checkless 360 degree turn option by adding -3 to end of catalog number (B ). B25209 Mueller 300 Ball Curb Valve: Mueller 110 Conductive Compression Connection for CTS O.D. tubing both ends. Quarter turn check this valve may be ordered with 360 degree turn option by adding -3 to end of catalog number (B ). MUE34B /4" $93.69 MUE1B " $ Curb Boxes - Optional Equipment H10321 MUE34B /4" $94.86 MUE1B " $ MUE2B " $ MUE8H Curb box wrench $ MUE6H Curb box wrench $ Mueller 300 Ball Curb Valve FIP thread both ends. Quarter turn check Minneapolis top thread. This valve may be ordered with 360 degree turn option by adding -3 to end of catalog number (B ). MUE34B /4" $82.85 MUE1B " $ MUE112B /2" $ MUE2B " $ Ball Curb Valves with Mueller 110 Connection B25155 H10322 MUEH Curb box wrench $ MUE6H Curb box wrench $78.62 H10323 WATERWORKS Mueller 300 Ball Curb Valve: Mueller 110 Conductive Compression Connection for CTS O.D. tubing both ends. Quarter turn check and Minneapolis top thread this valve may be ordered with 360 degree turn option by adding -3 to end of catalog number (B ). MUE34B /4" $ MUE1B " $ MUE112B /2" $ MUE2B " $ MUEH10323 Pentagon Key $9.18 H10356 MUE4H Curb box wrench $ The Midwest's Premier Distributor Since

16 Service Fittings & Saddles Mueller Company Curb Valves & Boxes Curb Boxes - Optional Equipment H10373 Curb Boxes - Extension Type with Minneapolis Pattern Base MUE7H tapt 2-1/2" $ Curb Boxes - Improved Extension Type with Arch Pattern Base MUEH10373LID 2-1/2" Inside fit $24.17 H10374 MUEH10385BX 7 $61.72 MUE7H w/rod $ Mark II Oriseal Curb Valves with Copper Flare Connection H15154 MUEH10374LID 2-1/2" Outside fit $24.17 Repair Lids MUE3H10374LID 3" Outside fit $35.27 Curb Boxes - Optional Equipment Shut Off Rod MUE " $26.50 Extension Type with Minneapolis Pattern Base MUELLER MARK II ORISEAL Curb Valve Copper flare nut both ends Quarter turn check and Minneapolis thread top MUE34H /4" $93.47 MUE1H " $ MUE114H /4" $ MUE112H /2" $ MUE2H " $ Mark II Oriseal Curb Valves with F.I.P. Connection H10284 MUE6H tapt 2" $88.60 MUE7H tapt 2" $58.39 MUE7H tapt 2-1/2" $ MUE8H10300WB 8 tapt 2" $ MUE7H tapt 1-1/2" $58.39 MUE34H /4" $77.24 MUE1H " $ MUE114H /4" $ MUE2H " $ WATERWORKS The Midwest's Premier Distributor Since

17 Service Fittings & Saddles Mueller Company Curb Valves & Boxes Mark II Oriseal Curb Valves with F.I.P. Connection MUE112H /2" $ MUE2H " $ Oriseal Curb Valves (Original Style - "Green Key") H15201 H10287 MUE34H /4" $80.71 MUE1H " $ MUE114H /4" $ MUE112H " $ MUE2H " $ Mark II Oriseal Curb Valves with Mueller 110 MUE1H " $ MUE112H /2" $ MUE2H " $ Oriseal III Curb Valves H15022 H15155 MUE34H /4" $ MUE1H " $ MUELLER MARK II ORISEAL Curb Valve. MUELLER 110 Conductive Compression Connection for CTS O.D. tubing-both ends Quarter turn check and Minneapolis top thread H15042 MUE34H /4" $ MUE1H " $ Oriseal Curb Valves (Original Style - "Green Key") H15151 MUE1H " $ Mark II Oriseal Curb Valves with Mueller 110 H15209 MUELLER ORISEAL III Curb Valve MUELLER Pack Joint Connection for CTS O.D. tubing-both ends Quarter turn check MUE34H /4" $ MUE1H " $ Service Fittings Service Fittings with Mueller 110 Compression Con WATERWORKS MUELLER MARK II ORISEAL Curb Valve, MUELLER 110 Conductive Compression Connection for CTS O.D. Tubing-both ends Quarter turn check MUE34H /4" $93.64 MUE1H " $ Straight coupling MUELLER 110 Conductive Compression Connection for CTS O.D.* tubing x female copper flare thread 34H /4" $ The Midwest's Premier Distributor Since

18 Service Fittings & Saddles Mueller Company Service Fittings Service Fittings with Mueller 110 Compression Con MUE1H " $35.03 MUE114H /4" $62.16 MUE112H /2" $86.41 MUE2H " $96.70 Service Fittings with Copper Flare Connection H15062 H15450 MUE34H /4" $18.46 MUE1H " $28.15 MUE114H /4" $48.47 MUE112H /2" $68.95 MUE2H " $ H15470 MUE1.34H " X 3/4" $27.93 H15400 Eighth bend coupling Female increasing I.P. thread (this thread is one size larger than nominal size of fitting) x copper flare nut MUE112H /2" $ MUE2H " $ H15485 MUE34H /4" $23.52 MUE34.1H /4" X 1" $34.89 MUE1H " $41.18 MUE114H /4" $77.30 MUE112H /2" $ MUE2H " $ H15425 MUE1H " $48.67 H15490 MUE34H /4" $18.60 MUE1H " $26.58 MUE114H /4" $48.47 MUE112H /2" $74.98 MUE2H " $ MUE1H " $46.80 H15525 MUE34H /4" $52.83 MUE1H /4" $70.83 MUE112H /2" $ WATERWORKS The Midwest's Premier Distributor Since

19 Service Fittings & Saddles Mueller Company Service Fittings Service Fittings with Copper Flare Connection H15525 MUE2H " $ H15530 H15451 MUE34H /4" $22.44 MUE1.34H " X 3/4" $25.97 MUE1H " $ H /2" $ H " $94.66 Service Tees H15380 MUE34H /4" $18.96 MUE1H " $31.53 Service Fittings with Mueller 110 Compression Conn H15403 MUE34H /4" $42.05 MUE1H " $74.18 MUE H /2" X 1" $ MUE112H /2" $ MUE2.2.1H " X 1" $ MUE2H " $ MUE34H /4" $25.56 MUE1.34H " X 3/4" $28.19 MUE1H " $27.88 MUE114H /4" $72.47 MUE112H /2" $89.23 MUE2H " $ H15428 H15381 Service tee MUELLER 110 Conductive Compression Connection for CTS O.D.* tubing-all ends WATERWORKS MUE34H /4" $20.95 MUE1.34H " X 3/4" $21.65 MUE1H " $24.74 MUE114H /4" $43.39 MUE112H /2" $62.12 MUE2H " $90.51 MUE34H /4" $ H /4" X 1" $37.26 MUE1H " $81.46 MUEH15381J 1-1/2" $ MUEH15381JG 1-1/2" X 1 $ MUEH15381K 2" $ MUEH15381KG 2" X 1" $ Tools & Miscellaneous Equipment Valve /4" $ " $ The Midwest's Premier Distributor Since

20 Service Fittings & Saddles Mueller Company Tools & Miscellaneous Equipment Valve /4" $ " $12.53 Smith Blair Inc Couplings Compression Couplings 525 Part No. Size Range List /2" IPS COUPLING 0.84" $ /4" IPS COUPLING 1.05" $ " IPS COUPLING 1.32" $ /4" IPS COUPLING 1.66" $ /2" IPS COUPLING 1.90" $ " IPS COUPLING 2.38" $63.54 Service Saddles 313 Service Saddles Part No. Size Range List SMI10.2CCSADL 10" X 2" CC OUTLET 10.64" " $ SMI12.1CCSADL 12" X 1" CC OUTLET 12.62" " $ SMI12.112CC313 12" X 1-1/2" CC OUTLET 12.62" " $ SMI12.2IP313 12" X 2" NPT OUTLET 12.62" " $ SMI12.2CC313 12" X 2" CC OUTLET 12.62" " $ Service Saddles Part No. Size Range List SMI " X 3/4" CC OUTLET 4.74" " $ SMI " X 1" CC OUTLET 4.74" " $ SMI " X 1-1/2" CC OUTLET 4.74" " $ SMI4.2CC317 4" X 2" CC OUTLET 4.74" " $ SMI6.34CC317 6" X 3/4" CC OUTLET 6.84" " $ SMI6.1CC317 6" X 1" CC OUTLET 6.84" " $ SMI6.114CC317 6" X 1-1/4" CC OUTLET 6.84" " $ SMI6.112CC317 6" X 1-1/2" CC OUTLET 6.84" " $ SMI6.2CC317 6" X 2" CC OUTLET 6.84" " $ SMI8.34CC317 8" X 3/4" CC OUTLET 8.54" " $ SMI8.1CC317 8" X 1" CC OUTLET 8.54" " $ SMI8.114CC317 8" X 1-1/4" CC OUTLET 8.54" " $ SMI8.112CC317 8" X 1-1/2" CC OUTLET 8.54" " $ SMI8.2CC317 8" X 2" CC OUTLET 8.54" " $ SMI " X 3/4" CC OUTLET 10.64" " $ SMI10.1CC317 10" X 1" CC OUTLET 10.64" " $ SMI10.114CCSADL 10" X 1-1/4" CC OUTLET 10.64" " $ SMI10.112CC317 10" X 1-1/2" CC OUTLET 10.64" " $ SMI " X 2" CC OUTLET 10.64" " $ SMI " X 3/4" CC OUTLET 12.62" " $ SMI " X 1" CC OUTLET 12.62" " $ SMI12.114CC317 12" X 1-1/4" CC OUTLET 12.62" " $ SMI12.112CC317 12" X 1-1/2" CC OUTLET 12.62" " $ SMI " X 2" CC OUTLET 12.62" " $ Smith-Blair 313 Double Bale Service Saddles have the same important design features as the 311. The 313 is especially recommended where large taps are required and where greater than normal transverse loading on the service line is anticipated. For unusually corrosive or aggressive environments Smith-Blair 317, 325, 327, 357, or 397 Service Saddles should be used. Part No. Size Range List SMI4.34CC313 4" X 3/4" CC OUTLET 4.74" " $62.18 SMI4.1CCSADL 4" X 1" CC OUTLET 4.14" " $59.81 SMI4.1CC313 4" X 1" CC OUTLET 4.74" " $62.18 SMI " X 2" NPT OUTLET 4.50" $74.54 SMI4.2NPT313 4" X 2" NPT OUTLET 4.74" " $80.41 SMI4.2IP313 4" X 2" NPT OUTLET 4.74" " $80.38 SMI6.34CC313 6" X 3/4" CC OUTLET 5.94" " $76.56 SMI6.1CC313 6" X 1" CC OUTLET 5.94" " $93.13 SMI6.112CC313 6" X 1-1/2" CC OUTLET 5.94" " $94.39 SMI6.2IP313 6" X 2" NPT OUTLET 6.84" " $94.39 SMI6.2CC313 6" X 2" CC OUTLET 6.84" " $94.39 SMI8.1CC313 8" X 1" CC OUTLET 8.54" " $83.61 SMI8.114CC313 8" X 1-1/4" CC OUTLET 8.54" " $ SMI8.112IP313 8" X 1-1/2" IPS OUTLET 8.54" " $ SMI8.112CCSDL 8" X 1-1/2" CC OUTLET 8.54" " $ SMI8.2IP313 8" X 2" NPT OUTLET 8.54" " $ SMI8.2CC313 8" X 2" CC OUTLET 8.54" " $ SMI10.1CCSADLE 10" X 1" CC OUTLET 10.64" " $ SMI10.114CCSDL 10" X 1-1/4" CC OUTLET 10.64" " $ SMI10.112CCSDL 10" X 1-1/2" CC OUTLET 10.64" " $ Storm Sewer Pipe & Ftgs Advanced Drainage Systems End Wall Part No. Item List ADS12ENDWALL 12" $ ADS15ENDWALL 15" $ ADS18ENDWALL 18" $ ADS24ENDWALL 24" $ Pipe 3000 Triple-Wall Pipe Direct Vent System for Category II, III & IV; Heating Equipment 3 through 16 Part No. List ADS3000PERF $1.41 WATERWORKS The Midwest's Premier Distributor Since

21 Storm Sewer Pipe & Ftgs Advanced Drainage Systems Pipe N-12 IB Water Tight Pipe Tap Sleeves Smith Blair Inc 622 Carbon Steel Tapping Sleeve N-12 IB WT's ceramic/polymer composite joint combined with HDPE's excellent abrasion and corrosion resistance, produces a joint with excellent strength. The wide proprietary ceramic/polymer composite is fused to the outside wall of the built-in bell, improving the joint's integrity and tolerance control. With its integral built-in bell and factory-installed gasket, the pipe requires no extra couplers, grout or other sealants to install. The joint meets or exceeds ASTM 3212 lab test and ASTM 1417 watertight field test, which helps fill an essential role in meeting the new, stricter Environmental Protection Agency guidelines. N-12 IB WT pipe is so advanced in it's design, it's easy to install and easy to put your confidence in for long term reliability. Part No. Item List ADS8.20N12 8" X 20 $10.10 ADS10.20N12 10" X 20 $12.67 ADS12.20N12 12" X 20 $14.17 ADS15.20N12 15" X 20 $19.85 ADS18.20N12 18" X 20 $27.53 ADS24.20N12 24" X 20 $42.74 ADS30.20N12 30" X 20 $66.20 Single-Wall Pipe 622 Tapping Sleeves consist of two sections of heavy welded steel which bolt together on the pipe and seal against a concave wedge gasket around the tap opening. The outlet half has a recessed flat faced flange to mate with standard tapping valves per MSS SP60 up through 12 inch size-on-size. For tap sizes 14-inch and above, flanges can be furnished to accommodate the valve requirements. The outlet half also has a ¾ inch NPT test plug. Part No. Size Range List SMI " X 4" EPOXY COATED 4.80" $ SMI " X 4" EPOXY COATED 6.90" " $ SMI " X 6" EPOXY COATED 6.90" " $ SMI8.4TAPSLV 8" X 4" EPOXY COATED 9.05" " $ SMI " X 6" EPOXY COATED 9.05" " $ SMI " X 8" EPOXY COATED 9.05" " $1, SMI " X 4" EPOXY COATED 11.03" " $ SMI " X 6" EPOXY COATED 11.03" " $ SMI " X 8" EPOXY COATED 11.03" " $1, SMI " X 10" EPOXY COATED 11.03" " $1, SMI " X 4" EPOXY COATED 13.13" " $ SMI " X 6" EPOXY COATED 13.13" " $ SMI " X 8" EPOXY COATED 13.13" " $1, SMI12.10TAPSLV 12" X 10" EPOXY COATED 13.13" " $1, SMI " X 12" EPOXY COATED 13.13" " $1, Stainless Steel Tapping Sleeve with Stainless ADS single-wall corrugated HDPE pipe is ideal for drainage projects where flexibility, light weight and low cost are important. Part No. Item List ADS TUBE 4" X 250 SOLID $0.91 ADS4.100R 4" X 100 SOLID $0.88 ADS TUBE 4" X 250 PERFORATED $0.91 ADS4.100P 4" X 100 PERFORATED $0.88 ADS TUBE 4" X 250 PERFORATED W/SOCK $1.22 ADS4.100DP 4" X 100 PERFOATED W/SOCK $1.32 ADS601ADS 6" X 100 PERFORATED $2.04 ADS651ADS 6" X 100 SOLID $2.04 ADS672ADS 6" X 100 PERFORATED W/SOCK $2.76 Part No. Size Range List SMI " X 4" STAINLESS STEEL 6.84" " $ SMI " X 6" STAINLESS STEEL 6.84" " $1, SMI " X 4" STAINLESS STEEL 8.99" " $1, SMI " X 6" STAINLESS STEEL 8.99" " $1, SMI " X 8" STAINLESS STEEL 8.99" " $1, SMI " X 6" STAINLESS STEEL 13.16" " $1, SMI " X 8" STAINLESS STEEL 13.16" " $1, SMI " X 6" STAINLESS STEEL 17.40" " $2, SMI " X 8" STAINLESS STEEL 17.40" " $2, WATERWORKS 524 The Midwest's Premier Distributor Since

22 Valve Box Materials Adaptor, Inc. Valve Adaptor Gatevalve Municipal water utilities and contractors have benefited over the years from the use of the Gate Valve Adaptor. The Gate Valve Adaptor has eliminated improper keying of the valves due to settling and shifting of the valve box. Using the Gate Valve Adaptor has proven to be a cost effective product for the water utilities. It has reduced future budget costs by eliminating the excavation and resetting of the valve box. Part No. Item List ADI4GVA 4" WATEROUS $ ADI4MUEGVA 4" MUELLER $ ADI4KENGVA 4" KENNEDY $ ADI4USPGVA 4" US PIPE $ ADI6GVA 6" WATEROUS $ ADI6MUEGVA 6" MUELLER $ ADI6KENGVA 6" KENNEDY $ ADI6USPGVA 6" US PIPE $ ADI8GVA 8" WATEROUS $ ADI8MUEGVA 8" MUELLER $ ADI8KENGVA 8" KENNEDY $ ADI8USPGVA 8" US PIPE $ ADI10GVA 10" WATEROUS $ ADI10MUEGVA 10" MUELLER $ ADI10KENGVA 10" KENNEDY $ ADI10USPGVA 10 US PIPE $ ADI12GVA 12" WATEROUS $ ADI12MUEGVA 12" MUELLER $ ADI12KENGVA 12" KENNEDY $ ADI12USPGVA 12" US PIPE $ Butterfly Municipal water utilities and contractors have benefited over the years from the use of the Butterfly Valve Adaptor. The Butterfly Valve Adaptor has eliminated improper keying of the valves due to settling and shifting of the valve box. Part No. Item List ADI1012BFYVA 10" - 12" BUTTERFLY $ ADI1416BFYVA 14" - 16" BUTTERFLY $ Bingham & Taylor Misc. Tyler Pipe Company Misc. Part No. Item List TYL10T 10T DD TOP SECTION TYLER $43.76 TYL16T 16T DD TOP SECTION TYLER $62.17 TYL69RISER 2-1/2" - 9" EXTENSION $84.59 TYL26T 26T DD TOP SECTION TYLER $ TYL664SVLVBOX 2 PC VCV BOX COMPLETE $ TYLVBCOVERSWR 5-1/4" DD CVR MARKED SEWER $28.95 TYL30T 30T DD TOP SECTION TYLER $70.12 TYL27B 27B DD BOTTOM SECTION TYLER $43.62 TYL24B 24B DD BOTTOM SECTION TYLER $84.59 TYL36B 36B DD BOTTOM SECTION TYLER $ TYLVBCOVER 5-1/4" DD CVR MARKED WATER $28.95 TYL4BASE #4 DD BASE $77.46 TYL6BASE #6 DD BASE $94.38 TYLGVB DD VALVE BOX L/LID L/BASE $ TYL668S 2 PC KV BOX COMPLETE $ Bingham & Taylor Riser BIN2PA 2" $69.06 BIN1PA 1" $51.84 BIN4PA 4" $88.34 Tyler Pipe Company Extension Part No. Item List BINLOCKLID 5-1/4" DD LOCKABLE COVER $62.66 BIN94CBB For 94F curb box $64.74 BIN56E 56E DD TOP SECTION B&T $ BIN64E 64E DD BOTTOM SECTION B&T $ BIN64S 64S BOTTOMS SECTION TYLER $ BIN4909A #6 DD BASE $ BIN4906 DD VALVE BOX COMPLETE B&T $ BINSCREW 2-1/2" - 12" ADJUSTMENT $90.03 TYL58VLVBX 14" $53.74 TYL59VLVBX 25" $84.59 Trumbull Industries, Inc. Mainline Valve Boxes Water Valve Box Risers TRM1VBR 1" $24.93 TRM112VBR 1-1/2" $28.85 TRM2VBR 2" $32.77 TRM3VBR 3" $45.16 WATERWORKS The Midwest's Premier Distributor Since

23 Valve Box Materials Trumbull Industries, Inc. Mainline Valve Boxes Water Valve Box Risers TRM4VBR 4" $57.70 Curb and Valve Boxes Water Valve Box Risers Slide-type The "RITE-HITE" adapter provides a method for adjusting valve boxes to pavement level. The adjustment range is from 2-1/2" to 8". Part No. List TRMRITEHITE $49.08 Star Valve Box Complete Part No. Item List BINGVBSTAR 74-94" DD BOX $ BINFVBSTAR 63-84" DD BOX $ Bingham & Taylor Curb Box Extension BIN4901X151EXT 9" Extension $34.55 BIN4901X152EXT 16" Extension $41.90 Watermain Pipe & Ftgs EBAA Iron Works Joint Restraint Mechanical Joint Curb Box Bingham & Taylor Curb Box Accessory Part No. Item List TYL60EXT 24" Extension $89.49 EBA4MRG 4" $39.11 EBA6MRG 6" $46.01 EBA8MRG 8" $70.22 EBA10MRG 10" $ EBA12MRG 12" $ EBA4MRGC900 4" $48.01 EBA6MRGC900 6" $58.20 EBA8MRGC900 8" $86.05 EBA10MRGC900 10" $ EBA12MRGC900 12" $ Part No. Item List BIN94FBUFFALOW 94F Buffalo box w/rod & ring $ BIN4901BCOVER For 94F curb box $9.78 BIN4901BROD For 94F curb box $95.99 BINFCBTOP For 94F curb box $86.53 BIN4901BRING For 94F curb box $13.96 Tyler Pipe Company Curb Box Accessory Part No. Item List TYL101F 101F Tyler arch curb box $ TYL F Extension $62.99 TYL498014E Enlarged base for 94F $25.97 JM Manufacturing/Freedom Pipe PVC Watermain Class 150# WATERWORKS DR18PP 4" X 20 $4.95 DR18PU 6" X 20 $9.69 DR18PX 8" X 20 $16.56 DR18P10 10" X 20 $25.24 DR18P12 12" X 20 $35.59 DR18P16 16" X 20 $70.78 Class 200# 526 The Midwest's Premier Distributor Since 1897 DR14PP 4" X 20 $8.06 DR14PU 6" X 20 $

24 Watermain Pipe & Ftgs JM Manufacturing/Freedom Pipe PVC Watermain Tyler Pipe Company Fitting Mechanical Joint Bolt Class 200# DR14PX 8" X 20 $20.95 DR14P10 10" X 20 $31.92 Mueller Company Tapping Materials & Misc. Valves Cut-In Sleeves 58.3TBOLT 5/8" X 3" $ TBOLT 3/4" X 3-1/2" $ TBOLT 3/4" X 4" $ TBOLT 3/4" X 4-1/2" $ CORBLTBOLT 3/4" X 3-1/2" COR BLUE $ CORBLTBOLT 3/4" X 4" COR BLUE $ CORBLTBOLT 3/4" X 4-1/2" COR BLUE $ TBOLT 3/4" X 5" COR BLUE $3.48 MUE4H842 4" $ MUE6H842 6" $ MUE8H842 8" $ MUE10H842 10" $1, MUE12H842 12" $1, Repcor Encasement Tubing Polyethylene Encasement Tubing 20 In over 35 years of service in thousands of utilities in the USA and throughout the world, polyethylene encasement has proved an effective corrosion protection system for miles of ductile iron pipe. Today, it is the most widely used method of protecting ductile iron pipe installed in corrosive environments. Polyethylene encasement involves simply wrapping the pipe with a tube of polyethylene immediately before installation of the pipe. It is easy for construction crews to install on-site and is by far the most economical way to protect ductile iron pipe. Also, unlike cathodic protection systems and bonded coatings, polyethylene encasement is a passive protection system, so it requires no monitoring, maintenance or supervision once installed. POLYETHYLENE ENCASEMENT TUBING Is inexpensive Is easy to install Requires no additional manpower Costs nothing to operate Does not deteriorate underground Is easily repaired with polyethylene tape Does not require special handling or packaging during shipment Provides a uniform environment for pipe, virtually eliminating corrosion Protects the pipe without the formation of concentration cells at coating holidays Part No. Item List 24LAYFLAT 3" - 10" PIPE $ LAYFLAT 12" PIPE $ LAYFLAT 16" PIPE $0.69 Flanged Part No. Item List 4FLG22L 4" 22-1/2 BEND $ FLG22L 6" 22-1/2 BEND $ FLG45L 4" 45 BEND $ FLG45L 6" 45 BEND $ FLGL 3" 90 BEND $ FLGL 4" 90 BEND $ FLGL 6" X 4" 90 BEND $ FLGL 6" 90 BEND $ FLGL 8" 90 BEND $ FLGT 3" TEE $ FLGT 4" TEE $ FLGTLACC 6" X 4" TEE $ FLGT 6" TEE $ FLGT 8" X 4" TEE $ FLGT 8" X 6" TEE $ FLGT 8" TEE $ FLGCONCR 6" X 4" CONC REDUCER $ FLGCONCR 8" X 4" CONC REDUCER $ FLGECCR 8" X 4" ECC REDUCER $ FLGCONCR 8" X 6" CONC REDUCER $ Mechanical Joint Part No. Item List 4.3FLGCONCR 4" X 3" CONC REDUCER $ MJS11L 12" MJ S/B 11-1/4 BEND $ MJS11L 10" MJ S/B 11-1/4 BEND $ MJS11L 8" MJ S/B 11-1/4 BEND $ MJS11L 6" MJ S/B 11-1/4 BEND $ MJS11L 4" MJ S/B 11-1/4 BEND $ MJS22L 12" MJ S/B 22-1/2 BEND $ MJS22L 10" MJ S/B 22-1/2 BEND $ MJS22L 8" MJ S/B 22-1/2 BEND $ MJS22L 6" MJ S/B 22-1/2 BEND $ MJS22L 4" MJ S/B 22-1/2 BEND $ MJS45L 12" MJ S/B 45 BEND $ WATERWORKS The Midwest's Premier Distributor Since

25 WATERWORKS Watermain Pipe & Ftgs Tyler Pipe Company Fitting Mechanical Joint Part No. Item List 10MJS45L 10" MJ S/B 45 BEND $ MJS45L 8" MJ S/B 45 BEND $ MJS45L 6" MJ S/B 45 BEND $ MJS45L 4" MJ S/B 45 BEND $ MJSLL 12" MJ S/B 90 BEND $ MJSLL 10" MJ S/B 90 BEND $ MJSLL 8" MJ S/B 90 BEND $ MJSLL 6" MJ S/B 90 BEND $ MJSLL 4" MJ S/B 90 BEND $ MJS+L 12" MJ S/B CROSS $ MJS+L 12" X 10" MJ S/B CROSS $ MJS+L 12" X 8" MJ S/B CROSS $ MJS+L 12" X 6" MJ S/B CROSS $ MJS+L 10" MJ S/B CROSS $ MJS+L 10" X 8" MJ S/B CROSS $ MJS+L 10" X 6" MJ SB CROSS $ MJS+L 8" MJ S/B CROSS $ MJS+L 8" X 6" MJ S/B CROSS $ MJS+L 6" MJ S/B CROSS $ MJS+L 4" MJ S/B CROSS $ MJSTL 12" MJ S/B TEE $ MJSTL 12" X 10" MJ S/B TEE $ MJSTL 12" X 8" MJ S/B TEE $ MJSTL 12" X 6" MJ S/B TEE $ MJSTL 12" X 4" MJ S/B TEE $ MJSTL 10" MJ S/B TEE $ MJSTL 10" X 8" MJ S/B TEE $ MJSTL 10" X 6" MJ S/B TEE $ MJSTL 10" X 4" MJ S/B TEE $ MJSTL 8" MJ S/B TEE $ MJSTL 8" X 6" MJ S/B TEE $ MJSTL 8" X 4" MJ S/B TEE $ MJSTL 6" MJ S/B TEE $ MJSTL 6" X 4" MJ S/B TEE $ MJSTL 4" MJ S/B TEE $ MJSSVLTL 12" X 6" MJ S/B SVL TEE $ MJSSVLTL 8" MJ S/B SVL TEE $ MJSSVLTL 8" X 6" MJ S/B SVL TEE $ MJSSVLTL 6" MJ S/B SVL TEE $ MJSBLSL 12" MJ S/B LONG SLEEVE $ MJSBLSL 10" MJ S/B LONG SLEEVE $ MJSBLSL 8" MJ S/B LONG SLEEVE $ MJSBLSL 6" MJ S/B LONG SLEEVE $ MJSBLSL 4" MJ S/B LONG SLEEVE $ MJSRL 12" X 10" MJ X MJ S/B REDUCER $ MJSRL 12" X 8" MJ X MJ S/B REDUCER $ MJSRL 12" X 6" MJ X MJ S/B REDUCER $ MJSRL 10" X 8" MJ X MJ S/B REDUCER $ MJSRL 10" X 6" MJ X MJ S/B REDUCER $ MJSRL 8" X 6" MJ X MJ S/B REDUCER $ MJSRL 8" X 4" MJ X MJ S/B REDUCER $ MJSRL 6" X 4" MJ X MJ S/B REDUCER $ MJSLEBL 12" X 10" MJ S/B LEB REDUCER $ MJSLEBL 12" X 8" MJ S/B LEB REDUCER $ MJSLEBL 12" X 6" MJ S/B LEB REDUCER $ MJSLEBL 10" X 8" MJ S/B LEB REDUCER $ MJSLEBL 10" X 6" MJ S/B LEB REDUCER $ MJSLEBL 8" X 6" MJ S/B LEB REDUCER $ MJSEBL 8" X 4" MJ S/B LEB REDUCER $ MJSLEBL 6" X 4" MJ S/B LEB REDUCER $ MJSLEBL 4" X 3" MJ S/B LEB REDUCER $ MJSSEBL 12" X 10" MJ S/B SEB REDUCER $ MJSSEBL 12" X 8" MJ S/B SEB REDUCER $ Part No. Item List 12.6MJSSEBL 12" X 6" MJ S/B SEB REDUCER $ MJSSEBL 10" X 8" MJ S/B SEB REDUCER $ MJSSEBL 10" X 6" MJ S/B SEB REDUCER $ MJSSEBW 10" X 4" MJ S/B SEB REDUCER $ MJSSEBL 8" X 6" MJ S/B SEB REDUCER $ MJSSEBL 8" X 4" MJ S/B SEB REDUCER $ MJSSEBL 6" X 4" MJ S/B SEB REDUCER $ MJSSEBL 4" X 3" MJ S/B SEB REDUCER $ MJSPERL 12" X 8" PE S/B REDUCER $ MJSPERL 12" X 6" PE S/B REDUCER $ MJSPERL 10" X 8" PE S/B REDUCER $ MJSPERL 10" X 6" PE S/B REDUCER $ MJSPERL 8" X 6" PE S/B REDUCER $ MJSPERL 8" X 4" PE S/B REDUCER $ MJSPERL 6" X 4" PE S/B REDUCER $ MJSPERL 4" X 3" PE S/B REDUCER $ MJSCL 12" MJ S/B CAP $ MJSCL 10" MJ S/B CAP $ MJSCL 8" MJ S/B CAP $ MJSCL 6" MJ S/B CAP $ MJSCL 4" MJ S/B CAP $ MJSCL 12" X 2" MJ S/B TAPT CAP $ MJSCL 10" X 2" MJ S/B TAPT CAP $ MJSCL 8" X 2" MJ S/B TAPT CAP $ MJSCL 6" X 2" MJ S/B TAPT CAP $ MJSCL 4" X 2" MJ S/B TAPT CAP $ MJSPL 12" MJ S/B PLUG $ MJSPL 10" MJ S/B PLUG $ MJSPL 8" MJ S/B PLUG $ MJSPL 6" MJ S/B PLUG $ MJSPL 4" MJ S/B PLUG $ MJSPL 12" X 2" MJ S/B TAPT PLUG $ TY18.2MSSPL 8" X 2" MJ S/B TAPT PLUG $ MJSPL 6" X 2" MJ S/B TAPT PLUG $ MJSPL 4" X 2" MJ S/B TAPT PLUG $ MJOSL 6" X 12" MJ C110 OFFSET $ MJOSL 6" X 18" MJ C110 OFFSET $1, MJOSL 8" X 12" MJ C110 OFFSET $1, MJOSL 8" X 18" MJ C110 OFFSET $1, MJOSL 8" X 24" MJ C110 OFFSET $1, MJSG 4" MJ S/B GLAND $ MJPR 4" MJ PR ACC PACK $ MJPRG 4" MJ PR GASKET $3.04 6MJDUOLSW 6" MJ LONG DUO SLEEVE $ MJDUOAP 6" MJ DUO SLEEVE ACC PACK $ MJSG 6" MJ S/B GLAND $ MJPR 6" MJ PR ACC PACK $ MJPRG 6" MJ PR GASKET $4.00 8MJDUOLSW 8" MJ LONG DUO SLEEVE $ MJDUOAP 8" MJ DUO SLEEVE ACC PACK $ MJSG 8" MJ S/B GLAND $ MJPRG 8" MJ PR GASKET $5.80 8MJPR 8" MJ PR ACC PACK $ MJSG 10" MJ S/B GLAND $ MJPRG 10" MJ PR GASKET $ MJPR 10" MJ PR ACC PACK $ MJPRG 12" MJ PR GASKET $7.87 3MJPRG 3" MJ PR GASKET $2.76 3MJPR 3" MJ PR ACC PACK $ MJSG 12" MJ S/B GLAND $31.87 Mechanical Joint Gaskets Part No. Item List 12MJTG 12" MJ IPS TRANS GASKET $ MJTG 10" MJ IPS TRANS GASKET $ MJTG 8" MJ IPS TRANS GASKET $8.83 6MJTG 6" MJ IPS TRANS GASKET $6.90 4MJTG 4" MJ IPS TRANS GASKET $ The Midwest's Premier Distributor Since

26 Watermain Pipe & Ftgs Tyler Pipe Company Joint Restraint Quick Flange TYL12KF 12" $ TYL10KF 10" $ TYL8KF 8" $84.45 TYL6KF 6" $61.94 TYL4KF 4" $57.61 US Pipe & Foundry Gasket Tyton Joint Gasket USP12TJGKT 12" $0.00 USP10TJGKT 10" $18.00 USP8TJGKT 8" $16.00 USP6TJGKT 6" $12.00 USP4TJGKT 4" $9.00 Joint Restraint MJ Field Lok Gasket Kit USP8MJFLPAK 8" $89.82 USP6MJFLPAK 6" $64.48 Pipe Ductile Iron Pipe Tyton Joint Pipe USP16CL55 16" $ USP16CL52 12" $ USP12CL55 12" $88.63 USP12CL53 12" $78.03 USP12CL52 12" $72.62 USP12CL350 12" $58.38 USP10CL55 10" $71.02 USP10CL52 10" $57.73 USP10CL350 10" $45.70 USP8CL55 8" $54.53 USP8CL53 8" $47.52 USP8CL52 8" $43.93 USP8CL350 8" $35.23 USP6CL55 6" $40.16 USP6CL53 6" $34.67 USP6CL52 6" $31.90 USP6CL350 6" $26.40 USP4CL53 4" $33.19 USP4CL52 4" $30.47 Watermain Valves American Flow Control Series 2500 TJ Field Lok Gasket Proven joint restraint technology. No learning curve installs just like a standard mechanical joint gasket and gland. No more need for time-consuming thrust blocks or heavy lug-type restraints. No loose wedges or torque-off control nuts to get lost or broken. Can be disassembled just like a standard mechanical joint. Suitable for potable water and wastewater applications. The state-of-the-art MJ FIELD LOK Gland is designed for maximum strength and easy product identification. MJ FIELD LOK Gaskets are provided as part of a kit that also includes the MJ FIELD LOK Gland, nuts and bolts. USP16FLG 16" $ USP12FLG 12" $ USP10FLG 10" $ USP8FLG 8" $ USP6FLG 6" $ USP4FLG 4" $75.89 UL Listed-FM Approved Seat Tested at 500 p.s.i.g. Fusion-Bonded-Epoxy Coating Complies With ANSI/AWWA C # Raised Face Flanges Available Ductile Iron Body, Bonnet, Wedge, Operating Nut, and Stuffing Box Shell Tested at 500 p.s.i.g. 250 p.s.i.g. AWWA UL and FM Pressure Rating Rubber-Encapsulated Wedge Triple O-Ring Stem Seals Thrust Washers Smooth (No Pocket) Waterway 100% Leak-Tight Closure NSF Standard 61 Certified Complies with AWWA C515 AFC12AFCL 12" $3, AFC10AFCL 10" $2, AFC8AFCL 8" $1, AFC6AFCL 6" $1, AFC4AFCL 4" $ AFC3AFCL 3" $ Mueller Company Gate Valves Gate Valve Accessories/Wrenches MUE $ WATERWORKS The Midwest's Premier Distributor Since

27 Watermain Valves Mueller Company Gate Valves Gate Valve Accessories/Wrenches MUE $ MUE6A $ Resilient Wedge Gate Valves A MUE12A " $2, MUE10A " $1, MUE8A " $1, MUE6A " $ MUE4A " $ Resilient Wedge Tapping Valves MUE12T " $3, MUE10T " $2, MUE8T " $1, MUE6T " $1, MUE4T " $1, Main Valves Butterfly Valves Lineseal III Butterfly Valves Class 150B WATERWORKS MUE16B3211L 16" $4, MUE12B3211L 12" $2, The Midwest's Premier Distributor Since