1. Potable Water Blue, Tan (Frazee Travatan, Color No. 213), or Safety Yellow 2. Recycled Water Magenta 3. Sewer/Wastewater - Green
|
|
|
- Abraham Oliver
- 6 years ago
- Views:
Transcription
1 UPDATE LOG FOR APPROVED MATERIALS LIST Date Item(s) Changed Page # 7/1/17 APPROVED MATERIALS LIST APPENDIX A IV. Paint E. Colors 8 1. Potable Water Blue, Tan (Frazee Travatan, Color No. 213), or Safety Yellow 2. Recycled Water Magenta 3. Sewer/Wastewater - Green Change Legend: Added Strike-out
2 Appendix A APPROVED LIST OF MATERIALS I. Water/Recycled Water Facilities A. Valves - Per Valve Application Table (herein) 1. Resilient Seat/Wedge Gate Valve 150 psi American Flow Control - Series 2500 AVK Valve - Series 25 Clow Valve - Series F6102 M&H Valve - Series 7561, 7571, 7572 Mueller Valve - Series A psi Mueller Valve - Series A 2360 US Pipe - Metro Seal AVK Valve Series 25 Matco-Norca 300RWV (Recycled Use Only) M&H Valve - Series 7561, 7571, psi American Flow Control - Series 2500 AVK Valve Series 45 Clow Valve M&H Valve Series 7561, 7571, Butterfly Valves Mueller/Pratt - CL150 - B-3211 CL250 - B-5227 DeZurik - BAW Series K-FLO - CL150 - Model 504 (4"-24") Model 47 (30" and larger) Milliken CL150 Fig. 501 Pratt HP Plug Valves DeZurik or Milliken (Series 602) Eccentric Non-Lubricated (PEC) 5. Ball Valves (6" and larger) Under 300 psi - Rubber Seat Over 300 psi - Metal Seat B. Valves - 2" and Smaller 1. Ball Valves 400/600 WOG (Small Diameter) Apollo Jones-J1900-(Air Valve Installations) A.Y. McDonald 6100FH 2. Ball Angle Meter Stops MIPT x CU Flare - 1", 1½", & 2" Jones E-1964W/E-1973W Ford BFA23-444W/666W/777W Mueller B-24255/B A.Y. McDonald 74602B Cambridge Series 210NL 3. Curb Stop Ford ¾ - B11-333W-NL 1 - B11-444W-NL 1½ - B11-666W-NL 2 - B11-777W-NL Jones - E1900W A.Y. McDonald 76101W Mueller - B20283N Cambridge - Series 212NL 4. Angle Curb Valve (Flare x FNPT) Muller 300 B24275 or approved equal 3. Metal Seated Butterfly Valves Adams Type MAK Vanessa Model 30000QTSVE DHC 1
3 5. Ball Corp Stops MIPT x CU Flare - 1", 1½", & 2" Jones E-1929 Ford FB700 Series Mueller B25025 A.Y. McDonald 74704B Cambridge Series 301NL C. Air Valve Units 1a. AV/AR Valves Single Body Apco 1" - 143C Apco 2" - 145C Apco 4" - 149C Crispin 1" - Model UL10 Crispin 2" - Model UL20 Crispin 4" - Model UL41 Valmatic 1" - Model 201C Valmatic 2" - Model 202C Valmatic 4 - Model 204C 1b. AV/AR Valves Dual Body (Pump Station, Well, and Reservoir Manifolds) Apco 1800 Series Valmatic 1 Model 101S Valmatic 2 Model 102S Valmatic 4 Model 104S D. Fire Hydrants 1. Residential (standard) 2-Port Jones 6" , 3710, 4040 Clow 6" 2050, 850, 950 AVK , 2470 a. High Pressure Fire Hydrants AVK Series 2472 (with integral 8-hole break-off spool) 2. Commercial (super) 3-Port Jones 6" 3765, 4060 Clow 6" 2060, 860, 960 AVK , 2490 E. Backflow Prevention Valves 1. Double Check Detector Assembly or Reduced Pressure Detector Assembly (USC/FM/UL-approved) 2. Reduced Pressure Principle Backflow Prevention Assembly (Lead Free, USC/FM/UL-approved) 3. Silent Check Valve Wafer Style: Apco - Series 300 Globe Style: Apco - Series 600 Series 581 Crispin - GC 4. Single Swing Check Valve (¾" - 2") (Buna or Teflon Seat) Milwaukee Hammonds 5. Double Swing Check ¾"- 1" Valve Watts No. 7 Dual Check Valve FEBCO No. 810 Dual Check Valve 6. Swing Check Valve (With Weight/Lever) Clow/M&H Mueller - A APCO/DeZurik Series 250 APCO/DeZurik Series 6000 American - Darling Model 52-SC 7. Hydraulic Check Valves Apco Dresser/M&H 8. Resilient Seated Check Valve American Flow Control Series
4 F. Control Valves 1. Pressure Relief Valve (Model 50G-01 BKC D/S Max. 8 ) 2. Pressure Reducing Valve (Model 90G-01 BYKOC D/S 8 and smaller) (Model 690G-01 BYKOC D/S 10 and larger) 3. Altitude Valve (5 40 Range) (Model 210G-01 BYKC D/S 16 and smaller) (Model 610G-01 BYKC D/S 20 and 24 ) 4. Pump Control Valve (Well Pumping Plant) Pump-To-Waste (Model 61G-02 BYKC D/S) (In-Line Combination Back Pressure, Solenoid S/O & Check Valve) (Model 58G-01 BDKC) 5. Pump Control Valve (Booster Pumps) (In-Line Combination Pump Control Valve/Check Valve) (Model 60G-11 BCKC D/S or Model 60G-73 BCKC D/S 8 and smaller) (Model 60G-31 BYKC D/S 10 and larger) 6. Surge Anticipator Model 52G-03 BKC D/S 7. Basic Valve (Model , Clayton Hytrol Valve) G. Tapping Sleeves and Service Saddles 1a. Tapping Sleeve (Stainless Steel) Ford - Series FAST and FTSS Power Seal - Series 3490AS Romac - Series SST JCM Series 432 1b. Tapping Sleeve (Ductile Iron with Fusion Epoxy Coating) Power Seal Romac 2. Service Saddle AC Pipe - Double Strap S.S. or Bronze Jones Series 979 Ford - Model 202BS Romac - Style 202 PVC Pipe C-900 Double SS Strap Or Wide Single SS Strap A.Y. McDonald - C900 Saddle 3846 and 3856 Ford - Model 202BS Jones - Series 969 Romac - Series 202BS or 202NS (high pressure) Mueller - BR2S or DR2S (high pressure) PVC Pipe C-905 Power Seal - Series 341AS Romac - Series 202N (with epoxy coating) 3
5 H. Joint Restrainers 1. PVC Pipe Mechanical Joint Restraints Valve/Fitting Application a. EBBA - Iron (Megalug) Series 2000 Pipe Sizes 4" - 30" b. Ford (Uniflange) (1) Series Adaptor Flange - Pipe Size up to 12" (2) Series Pipe Size up to 24" c. Sigma Joint Restrainers d. Tyler Union Tuf Grip (Red) e. Romac (1) Grip Ring Style No. 612 (2) Roma Grip (3) RFCA for PVC Pipe f. One Bolt g. JCM Series 610 h. Star Pipe Products Series 1000 Bell and Spigot Application a. EBBA - Iron (Megalug) (1) Series Pipe Size up to 12" (2) Series Pipe Size greater than 12" b. Ford (Uniflange) Series Pipe Size up to 24" c. Sigma Joint Restrainers d. Romac (1) Grip Ring Style No. 611 (2) Roma-Grip e. JCM Series 620 f. Star Pipe Products Series 1100 I. Ductile Iron Fittings Clow Long Beach Iron Tyler Pipe Inc. Sigma South Bay Foundry Star Union Foundary Company SIP Industries J. Plastic/Concrete Boxes/Vaults/Vault Lids 1. Plastic Meter Boxes & Lids ¾" - 1" Services: Carson Applied Engineering G2G 1½" - 2" Services: Carson Applied Engineering G2G 1" AV/AR: Carson Applied Engineering G2G 2" AV/AR Carson Applied Engineering P2P 2. Round Plastic Valve Boxes (Test Station Boxes) a. Applied Engineering Model 910 b. Carson Model Concrete Boxes/Vaults (Per Standard Drawings and Specs) Associated Best Concrete Products Brooks Christy J&R Products San Diego Pre-Cast B & W Pre-Cast 4
6 4. Spring-Loaded Aluminum Lids Puritan Manufacturing USF Fabrication, Inc. Bilco Co. Lasco Lids K. PVC Pipe C900 and C905 Vinyl Tech Diamond North American Pipe L. Pumps Goulds Peerless Byron Jackson Fairbanks-Morse M. Casing Spacers and Insulators Advance Products & Systems N. Repair Couplings Romac 501, XR-501, and Macro Total Piping Solutions Hymax Coupling O. Grooved Couplings Victaulic (Style 77) Gruvlok (Fig. 7001) II. Sewer Facilities A. Sewer Manhole Liners SRECO/Feable Systems B. Cast-Iron Manhole Covers Alhambra Foundry Co. South Bay Foundry Certain Teed C. Stepping Irons NEXTEP D. Fiberglass Manholes III. Electrical A. Motors General Electric Corporation Emerson Electric Co. U.S. Electrical Motors Division Baldor B. Conductive Waterproof Compound Zinc Clads Primer Coating No. B69A45 HTL-4 by Crouse-Hinds Kopr shield by Burndy C. Flex Conduits (Electrical) American Brass Anaconda Electroflex D. Wire and Cable (Electrical) Anaconda General Cable General Electric Okonite Triangle E. Compression Connectors Burndy HI lug Shure Stake F. Pre-Insulated Springs Connectors Ideal Wing Nuts 3M G. Pre-Insulated Fork Tongue Lugs RC Series Burndy H. High Temperature Vinyl Tape 3M Scotch (33+) 3M Scotch (23) Containment Solutions 5
7 I. Insulated Bushings Steel City Appleton Burndy J. Insulated Ground Bushings Steel City Gedney Burndy K. Erickson Coupling Appleton Type EC, 3-Piece Coupling Steel City Gedney Hubbell L. Liquid-Tight Fittings Appleton Type ST Crouse-Hinds Gedney Hubbell M. Hubs Appleton Type HUB Myers Scru-Tite Hubbell N. Pressure Switches Mercoid (DAW SPDT) Ashcroft O. Line Ammeter G.E. AB-16 Compton Yokogowa P. Ammeter Switch G.E. SB-1 Compton Yokogowa 6 Q. Thermostats Chromalox Type WR-80 R. Space Heaters Chromalox No. EH-1221 S. Switches and Push Buttons G.E. Type CR294OU, Square D, Class 9001, Type K T. Indicating Lights (Lamps) General Electric Sylvania U. AC Relays Westinghouse Type ARD, Square D, Class 8501, Type L IDEC V. DC Relays Westinghouse Type BFD, Square D, Class 8501, Type H W. Reset Timers Eagle Signal Division HP-5 Series IDEC X. Phase Failure Relay Motosaver 777 Y. Induction Relay C.F. Warrick, Series 1 Control Z. Elapsed Time Meter Cramer
8 AA. Customer Metering System Westinghouse Type IQ Data Plus II BB. Lighting Arrestors IV. Paint Type TII 325-IM A. Manufacturers: One of the following or equal: 1. Devoe: Devoe Coatings, Louisville, KY 2. Dunn Edwards: Dunn Edwards Paints, Los Angeles, CA 3. Sherwin-Williams Co., Cleveland, OH 4. Tnemec: Tnemec Co., Kansas City, MO. 5. FSC Coating B. Pretreatment, Primers, Primer-Sealers, and Wood Stain 1. Aluminum Primer: One of the a. S/W: DTM Wash Primer B71Y1 for alkyd systems; none required for latex systems 2. Concrete Masonry Filler/Primer: One of the a. S/W: B42W46, Block Filler Interior/Exterior b. Tnemec: , Envirofill 3. Concrete, Porous, Filler/Primer: One of the a. S/W: B42W46, Block Filler Interior/Exterior b. Tnemec: , Envirofill 7 4. Concrete, Smooth, Filler/Primer: One of the a. S/W: B61W2, Epoxy Ester Masonry Filler/Sealer b. Tnemec: W55 WB, Tneme-Crete 5. Ferrous Metal Primer: One of the a. S/W: B50WZ1, Kem Kromik Universal Metal Primer b. Tnemec: Series 135 Chembuild 6. Galvanized Metal Surface Pretreatment Materials: One of the a. Amercoat: 59. b. S/W: P60G2, Wash Primer c. Tnemec: , Tneme-Grip 7. Galvanized Metal Surface Primer: One of the following or equal: a. S/W: Galvite HS B50WZ30 for alkyd systems; none for latex systems b. Tnemec: Series 135 Chembuild 8. Plaster Sealer: One of the a. S/W: PreRite 200 Primer B28W200 b. Tnemec: , PVA Sealer 9. Plywood, Latex Finishes: One of the a. S/W: B42W41, A100 Latex Primer b. Tnemec: Series 151, Elasto-Grip 10. Wood Primer for Opaque Finish Paint, Interior Exposure: One of the a. S/W: B49WZ2, Wall and Wood Primer
9 11. Wood Primer for Opaque Finish Paint, Exterior Exposure: One of the a. S/W: Y24W20, A-100 Primer 12. Wood Stain: One of the a. S/W: Wood Classics Interior, Oil Stain C. Paints, Interior Exposure 1. Latex, Flat: One of the a. S/W: Promar 200, Latex Flat Wall Paint b. Tnemec: Series 6, Tneme Cryl 2. Latex, Semi-Gloss: One of the a. S/W: Promar 200, Latex Semi-Gloss Wall Paint b. Tnemec: Series 7, Tneme Cryl 3. Alkyd, Gloss: One of the a. S/W: B54Z, Industrial Enamel, VOC Complying 4. Acrylic, Semi-Gloss: One of the a. S/W: Min-Wax Helmsman Varnish D. Paints, Exterior Exposure 1. Latex, Flat: One of the a. S/W: A-100, Flat Exterior Latex b. Tnemec: W55 WB, Tneme-Crete 2. Alkyd, Gloss: One of the a. S/W: B54Z, Industrial Enamel, VOC Complying 3. Acrylic Latex, Semi-Gloss: One of the a. S/W: A100, Latex House and Trim Paint 4. Urethane Varnish, Clear: One of the a. Flecto: Varathane Exterior Liquid Plastic b. S/W: A67V4, Exterior Varnish E. Colors 1. Potable Water Blue, Tan (Frazee Travatan, Color No. 213), or Safety Yellow 2. Recycled Water Magenta 3. Sewer/Wastewater - Green 5. Urethane Varnish, Clear: One of the a. Flecto: Varathane Exterior Liquid Plastic b. S/W: A67V4, Exterior Varnish 6. Oil: One of the following or equal: a. Watco Danish Oil 8
APPROVED MATERIALS LIST SERVICE MATERIALS July 2017 **REVISED 12/6/17**
APPROVED MATERIALS LIST SERVICE MATERIALS July 2017 **REVISED 12/6/17** SIZE DESCRIPTION MANUFACTURER & MODEL NUMBER CORPORATION STOPS 1" MIP x GRIP Comp ball corp stop Ford: FB 1100-4Q McDonald: 74704-BQ
CITY OF SAN DIEGO PUBLIC UTILITIES DEPARTMENT APPROVED MATERIALS LIST TABLE OF CONTENTS
CITY OF SAN DIEGO PUBLIC UTILITIES DEPARTMENT TABLE OF CONTENTS SYSTEM Page A. Bronze Water Service Fittings.... 3 Corporation Stop, Curb Stop, Property Valve, Coupling, Compression Fittings, Adaptors,
ALBEMARLE COUNTY SERVICE AUTHORITY WATER APPROVED PRODUCTS LIST Effective Date: February 9, 2017
ALBEMARLE COUNTY SERVICE AUTHORITY WATER APPROVED PRODUCTS LIST Effective Date: February 9, 2017 I. Water Pipe, Fittings & Appurtenances A. Ductile Iron Pipe & C.I. or D.I. Fittings 1. Griffin Pipe Products,
Approved. Vendor List
APPENDIX A Approved Vendor List Product Manufacturer Valves and Accessories Air Release Valves ARV Enclosures Gate Valves Gate Valves Tapping Valves Insert Valve ARI ARI D 040 2" only ARI D 040 2" only
APPENDIX A. List of Materials and Approved Manufacturers. Revised July 2018
APPENDIX A List of Materials and Approved Manufacturers Revised July 2018 Water Distribution Please indicate your selection by writing an x in the box alongside the item of your choice. A cut sheet is
List of Materials and Approved Manufacturers
List of Materials and Approved Manufacturers Revised April 2017 300 West Plant Street, Winter Garden, FL 34787 (407) 656-4111 www.wintergarden-fl.gov Water Distribution Please indicate your selection by
List of Materials and Approved Manufacturers
List of Materials and Approved Manufacturers Revised April 2017 300 West Plant Street, Winter Garden, FL 34787 (407) 656-4111 www.wintergarden-fl.gov Water Distribution Please indicate your selection by
PUBLIC UTILITIES DEPARTMENT CITY OF SAN DIEGO APPROVED MATERIALS LIST FOR WATER STAN MEDINA DEPUTY DIRECTOR WATER OPERATIONS. u f! ASSISTANT DIRECTOR
PUBLIC UTILITIES DEPARTMENT CITY OF SAN DIEGO FOR WATER STAN MEDINA DEPUTY DIRECTOR WATER OPERATIONS DEPUTY DIRECTOR ENGINEERING & PROGRAM MANAGEMENT u f! u~~~ 7 STAN GRIFFITH ASSISTANT DIRECTOR DISTRIBUTION
COACHELLA VALLEY WATER DISTRICT Approved Materials List
DOMESTIC WATER A. COPPER TUBING a. 1-inch copper tubing, K-soft 1) Cerro 2) Mueller 3) Halstead 4) Cambridge Lee b. Factory Coated Copper Tubing Approved Manufacturer: 1) Kamco Aqua Shield c. 1½-inch or
Approved Large Meter & Water Construction Materials
Approved Large Meter & Water Construction Materials Jan 2019 Material List Index A B C D E F G H I J Page 2 Pages 2-3 Page 3 Page 3 Pages 3-4 Page 4 K L M N O P Q R S T Page 4 Pages 4-6 Page 6 Page 6 Page
MATERIAL SPECIFICATIONS AND BID PROPOSAL SHEET
CATEGORY 1: STEEL COUPLINGS 0 ¾" Steel Couplings (Smith-Blair #411-0501-003) 20 1" Steel Couplings (Smith-Blair #411-013201-003) 20 1¼" Steel Couplings (Smith-Blair #411-016601-003) 20 2" Steel Couplings
SECTION VALVES PART 1 -GENERAL
SECTION 1571 0 VALVES PART 3- EXECUTION General Shut-off Valves Balancing Valves Drain Valves RELATED WORK Section 15430- Plumbing Specialties Section 15450- Plumbing Equipment PART 1 -GENERAL SCOPE This
Harlingen Water Works System Approved Products List For Subdivisions. January 11, 2005
Harlingen Water Works System Approved Products List For Subdivisions January 11, 2005 Revised March 24, 2016 Harlingen Water Works System Approved Products List for Subdivisions Table of Contents: 1. Valves
SECTION II. (Sub-Section 300) Standard Water System Materials (Illustrations)
SECTION II (Sub-Section 300) Standard Water System Materials (Illustrations) Item Page PVC Pipe, DR 14, DR 18, DR 25 (4 thru 24 ) 300-1 Fire Hydrant 300-2 Polyethylene Tubing, PE 3408, SDR-9, CTS 300-3
PROJECT TITLE PROJECT NO: CONTRACT TITLE GRANT NO: UNIVERSITY OF CALIFORNIA, DAVIS CITY, CALIFORNIA
The following standard specification is intended to be edited according to the specifics of the project. Brackets [ ] and areas shaded in gray [e.g. format] indicate requirements that are optional depending
SECTION 400 WATER MATERIAL SPECIFICATIONS 400-2
SECTION 400 WATER MATERIAL SPECIFICATIONS 400-2 MATERIAL SPECIFICATION LIST WATER UTILITY General: 1. All manufacturers products listed are preferred. Others may be submitted to the OFS Engineering for
SECTION VALVES AND OPERATORS
SECTION 15200 VALVES AND OPERATORS PART 1 - GENERAL 1.1 SUBMITTALS A. Shop Drawings: 1. Product data sheets for make and model. 2. Complete catalog information, descriptive literature, specifications,
Yellow Shading Depicts Recommended Vendor ACT PIPE & SUPPLY AGUAWORKS PIPE & SUPPLY, LLC EMMSA CO FERGUSON WATERWORKS
Yellow Shading Depicts Recommended Vendor Bid Opening Date: February 05, 2015 at 4:00 p.m. Location: Conference Room 1B (1st floor) McAllen City Hall Project: 02-15-SP04-176 SUPPLY CONTRACT FOR THE PURCHASE
AWWA SWING CHECK VALVES. Engineering Creative Solutions for Fluid Systems Since 1901
AWWA SWING CHECK VALVES Engineering Creative Solutions for Fluid Systems Since 1901 TABLE OF CONTENTS AWWA SWING CHECK VALVE Series 8001 Lever & Weight or Spring...1 Series 9001 Lever & Weight or Spring...2
Golden State Water Company POTABLE WATER MATERIALS GUIDELINE
Air Release And Vacuum Relief Valve Air and Vacuum Enclosure Air and Vacuum Insulation Jacket (for areas subject to freezing weather) Backflow Preventer (Reduced Pressure Principle Type) Backflow Preventer
Service Materials. Service Materials. With Three Locations to Serve You: Avoca, NY 8125 Kanona Rd. Avoca, NY (607)
Service Materials Service Materials Rochester, NY 785 Beahan Rd. Rochester, NY 14624 (585) 436-9624 With Three Locations to Serve You: Avoca, NY 8125 Kanona Rd. Avoca, NY 14809 (607) 566-2214 Watertown,
GWE Street Expansion (Phase 2) LIST OF MATERIALS. Unit Qty Unit price Total. unit 3 $
1.0 Water distribution system Ductile cast iron pipe Ø150mm pre-insulated pipe (insulation thickness = 50 1.1 mm), Class 52 Tyton joints, conductivity stripe, (including insulation kit for m 540 $ joints)
Whapmagoostui First Nation. Main access ("B" street) Residential expansion - Phase 1 option D LIST OF MATERIALS. Revision Art.
1.0 Water distribution system Ductile cast iron pipe Ø150mm pre-insulated pipe (insulation thickness = 1.1 50 mm), Class 52 Tyton joints, conductivity stripe, (including insulation kit m 780 $ for joints)
FILTERS, STRAINERS AND VALVES PRODUCT GUIDE
FILTERS, STRAINERS AND VALVES PRODUCT GUIDE TEE FILTERS INLINE FILTERS BRASS FILTERS SPIN ON FILTERS OFF-LINE FILTRATION Y STRAINERS BASKET STRAINERS DUPLEX STRAINERS STRAINING ELEMENTS FRP STRAINERS DUAL
Division 23 - HVAC Section Switzerland Beallsville K-12 GENERAL DUTY VALVES FOR HVAC PIPING
SECTION 23 05 23 GENERAL-DUTY VALVES FOR HVAC PIPING PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and General Provisions of the Contract, including General and Supplementary Conditions and Division
INSERTA VALVE SLEEVE INSERTA VALVE ASSEMBLY. Valve insertion, simplified MATERIAL SPECIFICATIONS MATERIAL SPECIFICATIONS.
MADE IN U.S.A. Valve insertion, simplified 10-12 installations in cast iron, ductile iron, A/C, PVC C-900 and steel pipe No Loss of Pressure Minimal Water Loss Completion time is less than 2 hours Much
PIPE OUTSIDE DIAMETER GUIDE
June 7, 2018-1 PIPE OUTSIDE DIAMETER GUIDE PIPE OUTSIDE DIAMETER GUIDE - SMALL DIAMETER PIPE SIZES NOMINAL PIPE SIZES 1 /2" 3 /4" 1" 1 1 /4" 1 1 /2" 2" 2 1 /2" THIS O.D. GUIDE IS FOR YOUR CONVENIENCE &
CITY OF PORT ST. LUCIE UTILITY SYSTEMS DEPARTMENT 900 SE Ogden Lane Port St. Lucie, FL (772) TDD Accessible Jesus A.
CITY OF PORT ST. LUCIE UTILITY SYSTEMS DEPARTMENT 900 SE Ogden Lane Port St. Lucie, FL 34983 (772) 873-6400 TDD Accessible Jesus A. Merejo, Director Qualified Products List (QPL) Project Name: The following
SECTION VALVES
PART 1 GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions Specification Sections, apply to this Section. B. Related Sections:
Check Valve MODEL. Schematic Diagram. Product Dimensions Data:
Check Valve Simple Proven Design No-Slam Operation Drip-Tight Shut-Off No Packing Glands or Stuffing Boxes Easy to Install & Maintain 8-0 (Full Internal Port) MODEL 68-0 (Reduced Internal Port) The Cla-Val
See our expanding selection of products on Product Portfolio
See our expanding selection of products on www.fnw.com Product Portfolio Table of Contents Low Lead Products- Page 3 Ball Valves, Check Valves, Strainers, Water Hammer Arrestors Ball Valves, Brass - Page
PART IV APPROVED MATERIALS AND MANUFACTURERS LIST AND MATERIAL SPECIFICATIONS PRINCE GEORGE COUNTY, VIRGINIA
PART IV APPROVED MATERIALS AND MANUFACTURERS LIST AND MATERIAL SPECIFICATIONS PRINCE GEORGE COUNTY, VIRGINIA MAY 2008 1 THIS PAGE INTENTIONALLY LEFT BLANK 2 APPROVED MATERIALS AND MANUFACTURERS INTRODUCTION
Henderson Engineers, Inc. SECTION GENERAL DUTY VALVES FOR PLUMBING PIPING PART 1 - GENERAL REQUIREMENTS
SECTION 220523 - GENERAL DUTY VALVES FOR PLUMBING PIPING PART 1 - GENERAL REQUIREMENTS 1.1 SUMMARY A. This Section includes general duty valves common to most plumbing piping systems. 1. Special purpose
Brown University Revised August 3, 2012 Facilities Design & Construction Standards SECTION HVAC&R VALVES
SECTION 23 05 23 HVAC&R VALVES PART 1 - GENERAL 1.1 SUMMARY: A. Section includes valves for building services piping. 1.2 GENERAL VALVE APPLICATION REQUIREMENTS: A. Provide valve handle extensions that
PART 1 GENERAL 1.1 SCOPE OF WORK
SECTION 15110 PART 1 GENERAL 1.1 SCOPE OF WORK A. Furnish all labor, materials, equipment and incidentals required and install complete and ready for operation all valves and appurtenances as shown on
A. American National Standards Institute: 1. ANSI Z Relief Valves for Hot Water Supply Systems.
SECTION 220523 - PLUMBING VALVES PART 1 - GENERAL 1.1 SUMMARY A. Section Includes: 1. Ball valves. 2. Butterfly valves. 3. Swing check valves. 4. Spring loaded check valves. 5. Water pressure reducing
SUB WATER DEPARTMENT STANDARD CONSTRUCTION SPECIFICATIONS TABLE OF CONTENTS SECTION WATER DISTRIBUTION VALVES
SUB WATER DEPARTMENT STANDARD CONSTRUCTION SPECIFICATIONS TABLE OF CONTENTS SECTION 33 12 16 WATER DISTRIBUTION VALVES PART 1 GENERAL... 2 1.1 Description... 2 1.2 Reference Specifications, Codes, and
Note: The following items will be provided to the PSLUSD prior to project acceptance.
CITY OF PORT ST. LUCIE UTILITY SYSTEMS DEPARTMENT 900 SE Ogden Lane Port St. Lucie, FL 34983 (772) 873-6400 TDD Accessible (772) 871-7615 FAX Jesus A. Merejo, Director Qualified Products List (QPL) Project
MILLCENTRIC FULL/100% POR T ECCENTRIC PLUG VALVE
ISO 9001 CERTIFIED MILLCENTRIC FULL/100% POR T ECCENTRIC PLUG VALVE Suggested Specifications The Milliken criteria of quality, reliability, safety and value are embodied in the Millcentric Eccentric valve,
SECTION COMMON WORK RESULTS FOR FIRE SUPPRESSION. A. Pipe, fittings, valves, and connections for sprinkler systems.
SECTION 210500 - COMMON WORK RESULTS FOR FIRE SUPPRESSION PART 1 GENERAL 1.1 SECTION INCLUDES A. Pipe, fittings, valves, and connections for sprinkler systems. 1.2 RELATED REQUIREMENTS A. Section 099000
SECTION GENERAL-DUTY VALVES FOR PLUMBING PIPING
SECTION 22 05 23 PART 1 - GENERAL 1.1 SUMMARY A. Work Included: 1. Valves, General 2. Gate Valves 3. Balancing Valves 4. Ball Valves 5. Swing Check Valves 6. Backflow Prevention Assemblies 7. Pressure
Lead-free valves for potable water systems. Rev 02/17
Lead-free valves for potable water systems. Rev 02/17 UltraPure for purer water. The new standard. Senate law S.3874 was passed January 4, 2011 and is effective January 4, 2014. The law regulates lead
APPROVED VENDOR AND PRODUCT LISTING
APPROVED VENDOR AND PRODUCT LISTING September 2016 11900 East Terry Street Bonita Springs, FL 34135 (239) 992-0711 PVC Pipe North American Pipe C900, C905, SDR26 SDR35 not permitted Corporation Diamond
UNIVERSITY SERVICES ANNEX James Madison University Harrisonburg, Virginia State Project Code: Architect s Project Number:
SECTION 230523 GENERAL DUTY VALVES FOR HVAC PIPING PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Provisions of the Contract and of the Contract Documents apply to this Section. 1.2 DEFINITIONS A. The following
ISO RESILIENT WEDGE GATE VALVE. Engineering Creative Solutions for Fluid Systems Since 1901
ISO RESILIENT WEDGE GATE VALVE Engineering Creative Solutions for Fluid Systems Since 1901 TABLE OF CONTENTS ISO RESILIENT WEDGE GATE VALVE Scope of Line...1 Features and Benefits...1 Suggested Specification...2
Herpteraium SECTION VALVES GENERAL
SECTION 22 05 23 VALVES GENERAL 1.01 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections, apply to
A. This Section includes general duty valves common to several HVAC piping systems.
SECTION 23 05 23 - PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections, apply
GO WITH THE FLOW! PRODUCT GUIDE TITAN FLOW CONTROL, INC. TITAN TELEPHONE: YOUR PIPELINE TO THE FUTURE!
TITAN 290 CORPORATE DRIVE LUMBERTON, NC 28358 WWW.TITANFCI.COM TITAN@TITANFCI.COM 910.735.0000 TEL 910.738.3848 FAX TITAN FLOW CONTROL PRODUCT GUIDE GO WITH THE FLOW! TITAN FLOW CONTROL, INC. YOUR PIPELINE
DIVISION 23 HEATING, VENTILATING, AND AIR CONDITIONING (HVAC) SECTION HVAC VALVES
DIVISION 23 HEATING, VENTILATING, AND AIR CONDITIONING (HVAC) SECTION 23 05 23 PART 1 GENERAL 1.01 DESCRIPTION A. Provide valves for the following systems: 1. Heating Hot Water 2. Chilled Water 3. Condenser
SECTION VIII. (Sub-section 430) Wastewater Valves and Appurtenances. 1. General thru Gate Valves thru 430-3
SECTION VIII (Sub-section 430) Wastewater Valves and Appurtenances Article Page 1. General 430-1 thru 430-2 2. Gate Valves 430-2 thru 430-3 3. Plug Valves 430-3 thru 430-4 4. Check Valves 430-4 5. Tapping
Approved Branded Traceable Fire Protection & Waterworks Valves
Approved Branded Traceable Fire Protection & Waterworks Valves (800) 766-0076 www.smithcooper.com Los Angeles, CA Atlanta, GA Vancouver, WA Chicago, IL AWWA C515 Compliant CONSIDER Your Options Tamper
SECTION GENERAL-DUTY VALVES FOR HVAC PIPING. A. Contents of Division 23, HVAC and Division 01, General Requirements apply to this Section.
SECTION 23 05 23 PART 1 - GENERAL 1.1 SUMMARY A. Work Included: 1. Gate Valves 2. Balancing Valves 3. Ball Valves 4. Butterfly Valves 5. Swing Check Valves 1.2 RELATED SECTIONS A. Contents of Division
Copyright 2016 AIA MasterSpec Premium 12/16 PRODUCT MASTERSPEC LICENSED BY ARCOM TO CONBRACO, INC.
This Product MasterSpec Section is licensed by ARCOM to Apollo Flow Controls, Conbraco Industries, Inc ("Licensee").This Product MasterSpec Section modifies the original MasterSpec text and does not include
CTS WATER SERVICE TUBING - BLACK
CTS WATER SERVICE TUBING - BLACK Section 1 Cts Water Service Tubing shall be PE 3408 Resin listed in PPI TR4, MSF Standard 14 and NSF Standard 61, AWWA C901, ASTM D 2737, Cell classification per ASTM D
CITY OF TAMPA ADDENDUM 2. July 13, Contract 17-C-00030; David L. Tippin Water Treatment Facility Lime Slaker Replacement
CITY OF TAMPA Bob Buckhorn, Mayor CONTRACT ADMINISTRATION DEPARTMENT Michael W. Chucran, Director ADDENDUM 2 July 13, 2017 Contract 17-C-00030; David L. Tippin Water Treatment Facility Lime Slaker Replacement
DWU APPROVED MATERIALS LIST FOR WATER & WASTEWATER CONSTRUCTION
APPROVED MATERIALS LIST FOR WATER & WASTEWATER CONSTRUCTION Unless otherwise specified in the plans and/or specifications, following materials can be considered for the project contingent upon approval
SECTION 1019 VALVES AND APPURTENANCES GENERAL: Valves shall have manufacturer's name and pressure rating cast in raised letters.
SECTION 1019 VALVES AND APPURTENANCES Delete this Section in its entirety and replace with the following: SECTION 1019 VALVES AND APPURTENANCES 1019-1 GENERAL: Valves shall have manufacturer's name and
1 Visit for more details. Contact the Factory at
PACIFIC Fire Protection Solutions for Offshore and Onshore Applications Deluge Pressure Relief Pressure Reducing Level Control Solenoid Control Air Release and Check Valves 1 Visit www.cla-valpacific.com
Michigan State University Construction Standards. GENERAL-DUTY VALVES FOR PLUMBING PIPING Page
Page 220523-1 SECTION 220523 - PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections,
See our expanding selection of products on Product Portfolio
See our expanding selection of products on www.fnw.com Product Portfolio Table of Contents Low Lead Products- Page 3 Ball Valves, Check Valves, Strainers, Water Hammer Arrestors Ball Valves, Brass - Page
AUTOMATION ACCESSORIES IN-PLANT VALVE PRODUCTS EXTENSION STEMS FLOORBOX STEM GUIDES FLOORSTANDS COMMITTED TO ENVIRONMENTAL RESPONSIBILITY FLAP VALVES
INCREASING SWING CHECK VALVES FLAP VALVES SWING CHECK VALVES AUTOMATION ACTUATION CLOW VALVE has furnished valves with many assorted types of motorized to operate our valves. The gate valves use multi-turn,
Suggested Specifications
ISO 9001 Certified Suggested Specifications The Milliken criteria of quality, reliability, safety and value are embodied in the Millcentric Eccentric valve, setting higher standards for dependable performance
Ford Service Saddles and Tapping Sleeves
DQS Inc. Section AA 09/2017 THE FORD METER BOX COMPANY, INC. CERTIFIED TO ISO 9001:2015 10004466 Ford Service Saddles and Tapping Sleeves Contents Recommended Product Application *Steel *C900/909*** Cast
InsertaValve Sleeve. InsertaValve Valve Assembly. Valve Insertion, simplified. Material Specifications. Transmate InsertaValve
Material Specifications Material Specifications Sleeve 10" - 12" installations in cast iron, ductile iron, A/C, PVC C-900 and steel pipe No Loss of Pressure Minimal Water Loss Completion time is less than
COMPACT CHECK VALVES Engineering Creative Solutions for Fluid Systems Since 1901
COMPACT CHECK VALVES Engineering Creative Solutions for Fluid Systems Since 1901 TABLE OF CONTENTS SPRING LOADED CHECK VALVES Standard Features... 1 DOUBLE DISC CHECK VALVE Scope of the Line... 1 Technical
SECTION PLUMBING PIPING VALVES AND ACCESSORIES PART 1 - GENERAL
SECTION 22 10 10 PLUMBING PIPING VALVES AND ACCESSORIES PART 1 - GENERAL 1.1 RELATED DOCUMENTS: A. The Conditions of the Contract and applicable requirements of Division 1, "General Requirements", and
Sludge Dewatering and Odor Control at Plant 1 CONFORMED
2. Fire Service Main Interior Piping from Exterior Service up to Fire Sprinkler Alarm Check Valve: a. Pipe: Schedule 40 galvanized steel. b. Fittings: Galvanized 150-pound malleable iron, screwed or Victaulic
TABLE OF CONTENTS. Pipe Diameter Chart (Reference Only)..50 Extensions 38,40,42,44
TABLE OF CONTENTS Item Page Item Page ANSI/AWWA Compact & Full Body Pipe Fittings: Product Submittals and Installation: Mechanical & Flange Joint C153. 3-9 20U Protective Fusion Bonded Epoxy....5,5 Mechanical
DARTMOUTH COLLEGE DESIGN January 3, 2012 & CONSTRUCTION GUIDELINES
SECTION 15100 VALVES PART 1 DESIGN DIRECTIVE 1.1 SUMMARY A. This Section includes general duty valves common to most mechanical piping systems, special duty valves are specified in individual piping system
CCNE Check Valves Engineering Creative Solutions for Fluid Systems Since 1901
CCNE Check Valves Engineering Creative Solutions for Fluid Systems Since 1901 A Tradition of Excellence With the development of the first rubber seated butterfly valve more than 70 years ago, the Henry
BALL VALVES. Industry-Leading 300psi Low Lead Ball Valves
BALL VALVES Industry-Leading 300psi Low Lead Ball Valves Designed and Manufactured to Meet Your Needs 1 Lockwing Accepts bullet lock (when equipped on meter valve). 2 Stainless steel reinforced seat gaskets
SAN ANTONIO WATER SYSTEM SPECIFICATIONS FOR RUBBER-SEATED BUTTERFLY VALVES 3 INCHES THROUGH 72 INCHES ANSI/AWWA C504 Class 150/250 December 2012
SAN ANTONIO WATER SYSTEM SPECIFICATIONS FOR RUBBER-SEATED BUTTERFLY VALVES 3 INCHES THROUGH 72 INCHES ANSI/AWWA C504 Class December 2012 1. SCOPE This product specification covers class rubber-seated butterfly
AWWA Swing Check Valves
AWWA Swing Check Valves Engineering Creative Solutions for Fluid Systems Since 1901 A Tradition of Excellence With the development of the first rubber seated butterfly valve more than 70 years ago, the
516509_tabs 11/16/10 4:55 AM Page 1 FIRE HYDRANTS
Date Printed: November 2010 FIRE HYDRANTS or Tyton (6"),6, or 8" A EDDY FIRE HYDRANTS PARTS LIST WORKING PRESSURE: 150 PSI Note: Discontinued For Reference Only 350 PSI Working Pressure
FORD ea S FORD ea FORD ea S FORD ea S FORD ea S FORD 27.
1 2 x 3/4 CC Brass Saddle FORD 15.93 ea S70-203 FORD 17.68 ea 570-203 2 2 x 1 CC Brass Saddle FORD 15.93 ea S70-204 FORD 17.68 ea S70-204 3 4 x 3/4 CC Brass Saddle FORD 24.74 ea S70-403 FORD 27.47 ea S70-403
SECTION MISCELLANEOUS VALVES
SECTION 05140 - PART 1 - GENERAL 1.1 WORK OF THIS SECTION A. The WORK of this Section includes providing miscellaneous valves as indicated, complete and operable, including accessories and operators. 1.2
Copyright 2012 AIA MasterSpec Premium 06/12 PRODUCT MASTERSPEC LICENSED BY ARCOM TO CONBRACO, INC.
This Product MasterSpec Section is licensed by ARCOM to Apollo Flow Controls, Conbraco Industries, Inc ("Licensee").This Product MasterSpec Section modifies the original MasterSpec text and does not include
SECTION GENERAL-DUTY VALVES FOR PLUMBING PIPING
SUNY GENESEO 220523-1 PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections, apply
ADMIRAL HYDRANT. clowvalve.com
clowvalve.com ADMIRAL HYDRANT AWWA C502 UL LISTED FM APPROVED NSF 61/372 CERTIFIED 250 PSI WORKING PRESSURE 350 PSI WORKING PRESSURE AVAILABLE 10-YEAR LIMITED WARRANTY Clow Valve, A Division of McWane,
A. This Section includes the following domestic water piping specialties:
Page 221119-1 SECTION 221119 - PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections,
APPROVED VENDOR AND PRODUCT LISTING
APPROVED VENDOR AND PRODUCT LISTING January 2018 Bonita Springs Utilities, 11900 East Terry Street Bonita Springs, FL 34135 (239) 992-0711 Bonita Springs Utilities, PVC Pipe North American Pipe DR14 C900,
Approved Material List Summary of Revisions
Approved Material List Summary of Revisions March 3, 2014 Updates added to the Water Utilities Department Approved Material List: Add "Champion Controls Inc." to: PW 47 - Remote Telemetry Units (PLC) Type
TEL: Version: KW2
WWW.KLAMBON.COM 1 Page Klambon Water is a wholly owned subsidiary of West Rand Engineering (WRE), we are suppliers of valves, fittings and related products to all industries and our service extends to
JEFFERSON UTILITIES 270 INDUSTRIAL BLVD. KEARNEYSVILLE, WV (304) STANDARDS AND SPECIFICATIONS
JEFFERSON UTILITIES 270 INDUSTRIAL BLVD. KEARNEYSVILLE, WV 25430 (304) 728-2077 STANDARDS AND SPECIFICATIONS FEBRUARY 28, 2018 1 TABLE OF CONTENTS GENERAL MATERIAL... 3 WATER... 5 DUCTILE IRON PIPE...
***************************************************************************************************************
15515 VALVES, HANGERS, AND SPECIALTIES *************************************************************************************************************** SPECIFIER: CSI MasterFormat 2004 number:23 21 16 ***************************************************************************************************************
Ford Brass Saddles Style 101B and 202B
101B Ford Brass Saddles 101B and 202B 101B, 3/4" and 1" Taps 202B, 3/4" through 2" Taps Specifications Body - 85-5-5-5 brass alloy as per ASTM B62, ASTM B584 and AW WA C800. Threads may be FIP, AW WA,
Lead-free valves for potable water systems.
Lead-free valves for potable water systems. UltraPure for purer water. The new standard. On January 1, 2010, new laws went into effect that regulate lead content in plumbing products used for potable
OPTIMAL VALVE SOLUTIONS FOR OIL AND GAS PLANTS
AVK FLOW CONTROL OPTIMAL VALVE SOLUTIONS FOR OIL AND GAS PLANTS InterApp World Valve Wouter Witzel TEC artec AVK 1 2 AVK FLOW CONTROL l OIL & GAS PLANTS CONTENT: AVK FLOW CONTROL 4-5 OFFSHORE PRODUCTION
GATE/GLOBE/CHECK VALVE, BALL VALVES, BUTTERFLY VALVES, KNIFE GATE VALVES, CONTROL VALVES and ACTUATION
GATE/GLOBE/CHECK VALVE, BALL VALVES, BUTTERFLY VALVES, KNIFE GATE VALVES, CONTROL VALVES and ACTUATION CARBON STEEL,, HASTELLOY, CARPETER 20 MONEL, PVC, CAST IRON, DUCTILE IRON, TITANIUM, DUPLEX 3 PC FOUR
Milliken Valve offers the following for your water and wastewater needs:
Milliken Valve offers the following for your water and wastewater needs: s Series 601/600 Flanged & MJ Series 601S Stainless Steel Series 601RL Rubber Lined Series 602 High Pressure Series 613A Threaded
mh-valve.com 129 HYDRANT AWWA C502 NSF 61/372 CERTIFIED UL LISTED FM APPROVED 250 PSI WORKING PRESSURE 10-YEAR LIMITED WARRANTY
mh-valve.com 129 HYDRANT AWWA C502 NSF 61/372 CERTIFIED UL LISTED FM APPROVED 250 PSI WORKING PRESSURE 10-YEAR LIMITED WARRANTY 129 HYDRANT YESTERDAY, TODAY, & TOMORROW For more than 85 years, the M&H
ADDENDUM NUMBER 2 (DATED May 7, 2012) TO THE CONTRACT DOCUMENTS AND CONSTRUCTION SPECIFICATIONS FOR WINDSOR CRUDE OIL TERMINAL
ADDENDUM NUMBER 2 (DATED May 7, 2012) TO THE CONTRACT DOCUMENTS AND CONSTRUCTION SPECIFICATIONS FOR WINDSOR CRUDE OIL TERMINAL From: Michael Brake, JR Engineering To: All Plan holders and/or Prospective
BS 5163 Resilient Wedge Gate Valve
BS 516 Resilient Wedge Gate Valve BS 516 Flanged Resilient OS&Y Gate Valve, Type A, (XZ41X), /16, Gate valves serve to cut the medium flow in the piping system, widely used in the field of potable water,
BuildingName The Description of the Project P DOCUMENTS SPECIFICATION DIVISION 22 SECTION DESCRIPTION DIVISION 22 SECTION VALVES
ARCHITECTURE, ENGINEERING AND CONSTRUCTION P00000000 0000 DOCUMENTS ARCHITECTURE & ENGINEERING 326 East Hoover, Mail Stop B Ann Arbor, MI 48109-1002 Phone: 734-764-3414 Fax: 734-936-3334 SPECIFICATION
Water Inventory Items Bidder Price List
Water Inventory Items Bidder Price List # ASPA ITEM NO. DESCRIPTION MAKE/MODEL CAT/SPEC QTY UOM LAST UNIT PRICE EXTENDED PRICE Group 1:STANDARD BRASS FITTINGS 1 81460106 ELBOW, BRASS 2"X 45 DEGREE LEE
Valve Selection. 1. Function and service considerations
1. Function and service considerations Valve Selection Selection Valves serve the purpose of controlling the fluids in building services piping. Valves are produced in a variety of design types and materials.
MEDALLION HYDRANT. clowvalve.com AWWA C502 UL LISTED FM APPROVED NSF 61/372 CERTIFIED 250 PSI WORKING PRESSURE 10-YEAR LIMITED WARRANTY
clowvalve.com MEDALLION HYDRANT AWWA C50 UL LISTED FM APPROVED NSF 6/37 CERTIFIED 50 PSI WORKING PRESSURE 0-YEAR LIMITED WARRANTY Clow Valve, A Division of McWane, Inc. MEDALLION HYDRANT FIRE PROTECTION
AIR/VACUUM VALVE AND OPTIONAL ANTI-SLAM DEVICE SPECIFICATION
AIR/VACUUM AND OPTIONAL ANTI-SLAM DEVICE SPECIFICATION Scope. This specification is intended to cover the design, manufacture, and testing of / in. (3 mm) through 0 in. (00 mm) Air/Vacuum Valves suitable
San Antonio Water System Standard Specifications for Construction ITEM NO. 834 FIRE HYDRANTS
San Antonio Water System Standard Specifications for Construction ITEM NO. 834 FIRE HYDRANTS 834.1 DESCRIPTION: This item shall consist of fire hydrant installations using joint restraints in accordance
TENOCHCA HALL - PROJECT NO FAN COIL UNITS, RESTROOM AND FINISH RENOVATION
SECTION 220523.12 - PART 1 - GENERAL 1.1 SUMMARY A. Section Includes: 1. Brass ball valves. 2. Bronze ball valves. 1.2 ACTION SUBMITTALS A. Product Data: For each type of valve. 1. Certification that products