Accessories. Speed Control Motors B-193. Speed Control Motors. Cables Indicator Others

Transcription

1 Control Motors Control Motors Accessories Introduction BX BE AXU FB DC Input BH MSS W US Brushless Motors AC Control Motors ES01/ ES0 Page Overview of Accessories B-194 Cables B-195 Motor Indicator B-198 Control Modules B-00 External Potentiometer B-00 Regeneration Units B-01 DIN Rail Mounting Plates B-01 Front Cover B-0 Motor and Gearhead Mounting Brackets B-03 Flexible Couplings B-04 Cables Indicator Others Inverters Accessories FE100/ FE00 00 W BHF Cables Indicator Others Installation B-193

2 Control Motors Cables Indicator Overview of Accessories Accessories necessary for installing products and performing operation are available. Motor and Gearhead Mounting Brackets Page A-49 Flexible Couplings Page A-5 Cables Page B-195 Control Modules External Potentiometer These are high strength type mounting brackets for motors and gearheads. Installation Example These are clamp type couplings for connecting the motor/gearhead shaft with the driven shaft. Each coupling has machined holes corresponding to the specified shaft diameter size. Couplings with various hole sizes are standard. Various cables that are useful for connecting motors and drivers are available. Regeneration Units Motor and Gearhead DIN Rail Mounting Plates Flexible Coupling Cable Front Cover Mounting Brackets Motor and Gearhead Mounting Bracket Driver Couplings Indicator Page B-198 In addition, convenient accessories are available. Control Modules Page B-00 Control Modules Page B-00 External Potentiometer Page B-00 Regeneration Units Page B-01 DIN Rail Mounting Plates Page B-01 Front Cover Page B-0 B-194 ORIENTA MOTOR GENERA CATAOGUE

3 Cables Customer Support Centre Singapore: , Malaysia: , Others: Extension Cables and Flexible Extension Cables for BX Series These cables are used to extend the wiring distance between the motor and driver. Use the flexible extension cable in applications where the cable is bent and flexed. All extension cables and flexible extension cables come as a set of motor and encoder cables. Types Extension Cables (CC_SBF) Product Name ength (m) CC01SBF 1 CC0SBF CC03SBF 3 CC05SBF 5 CC07SBF 7 CC10SBF 10 CC15SBF 15 CC0SBF 0 Flexible Extension Cables (CC_SBR) Product Name ength (m) CC01SBR 1 CC0SBR CC03SBR 3 CC05SBR 5 CC07SBR 7 CC10SBR 10 CC15SBR 15 CC0SBR 0 Notes on use of flexible extension cable Page B-196 For Motor For Motor 13.8 For Encoder (14.5) 13.8 CC_SBF: ϕ8 CC_SBR: ϕ P (MOEX) R (MOEX) For Encoder (14.5). Encoder Side Extension Cables and Flexible Extension Cables for BE Series The BE Series comes with a 1 m, m or 3 m extension cable for connection between the motor and driver. When the distance between the motor and the driver is extended, the accessory (sold separately) extension cable must be used. Use the accessory (sold separately) flexible extension cable in applications where the cable is bent and flexed. Types Extension Cables (CC_BE) Product Name ength (m) CC01BE 1 CC0BE CC03BE 3 CC05BE 5 CC07BE 7 CC10BE 10 CC15BE 15 CC0BE 0 Flexible Extension Cables (CC_BER) Product Name ength (m) CC01BER 1 CC0BER CC03BER 3 CC05BER 5 CC07BER 7 CC10BER 10 CC15BER 15 CC0BER 0 Notes on use of flexible extension cables Page B Note When connecting the extension cable, keep the overall length of the cable at 0 m or less (maximum 3 cables). CC_SBF: ϕ8 CC_SBR: ϕ P (MOEX) R (MOEX). 7.9 (5) Housing: (MOEX) Housing: (MOEX) CC_BE: ϕ9 CC_BER: ϕ10 Housing: R-10 (MOEX) Housing: P-10 (MOEX) (10.9) (14.5) Brushless Motors AC Control Motors Inverters Accessories Control Motors Introduction BX BE AXU FB DC Input BH MSS W US ES01/ ES0 FE100/ FE00 00 W BHF Cables Indicator Others Installation B-195

4 Control Motors Cables Indicator Control Modules External Regeneration Units Potentiometer DIN Rail Mounting Plates Front Cover Mounting Brackets Extension Cables for AXU Series These cables are used to extend the wiring distance between the motor and driver. The maximum extension length is 10.5 m. Types Product Name ength (m) CC01AXU 1 CC0AXU CC03AXU 3 CC05AXU 5 CC10AXU 10 (14.5). Extension Cables and Flexible Extension Cables for FB Series These cables are used to extend the wiring distance between the motor and driver. The maximum extension length is 10.5 m. Use the flexible extension cable in applications where the cable is bent and flexed. Types Extension Cables (CC_FB) Product Name ength (m) CC01FB 1 CC0FB CC03FB 3 CC05FB 5 CC07FB 7 CC10FB 10 Flexible Extension Cables (CC_FBR) Product Name ength (m) CC01FBR 1 CC0FBR CC03FBR 3 CC05FBR 5 CC07FBR 7 CC10FBR 10 Notes on use of flexible extension cables Page B-196 Extension Cable (14.5) 6.4 ϕ9 Housing: R (MOEX) Housing: P (MOEX) ϕ9 Housing: R (MOEX) Housing: P (MOEX) Flexible Extension Cable (14.5) 6.4 ϕ10.5 Housing: R (MOEX) Housing: P (MOEX) Couplings Extension Cables for BH Series These cables are used to extend the wiring distance between the motor and driver. The maximum extension length is m. 15 W/30 W/50 W CC0BH W CC0AXH 1500 (7.6) 5.3 Housing: (MOEX) Housing: (MOEX) Housing: (AMP) Housing: (AMP) ϕ (6.76) 16.7 (7.5) ϕ9 Housing: (MOEX) Housing: (MOEX) Notes on Use of Flexible Extension Cables 1Do not allow the cable to bend at the cable connector. For the bending radius, use at six times or more of the cable diameter. 6 times min. of cable diameter 3The extension cable is not for bending. If the cable is to be bent, bend it at the flexible extension cable. Flexible Extension Cable (Bending) Driver Motor Cable (Fix the cable.) B-196 ORIENTA MOTOR GENERA CATAOGUE

5 Extension Cable for MSS W Series Customer Support Centre Singapore: , Malaysia: , Others: Extension Cables used between the MSS W Series motors and speed controllers conform to the RoHS Directive. Two types are available for different motor output powers. The maximum extension length is 10 m. Types MSS06, MSS315, MSS45, MSS540 Types Product Name ength (m) CC01SU05 1 CC0SU05 CC03SU05 3 CC04SU05 4 CC05SU05 5 CC07SU05 7 CC10SU05 10 MSS560, MSS590 Types Product Name ength (m) CC01SU07 1 CC0SU07 CC03SU07 3 CC04SU07 4 CC05SU07 5 CC07SU07 7 CC10SU07 10 ϕ7.8 Housing: P (MOEX) ϕ11. Housing: P (MOEX) Housing: R (MOEX) Controller Side Housing: R (MOEX) Controller Side Note These cables are for exclusive use with products that conform to the RoHS Directive. Since the connector is different, the MSS W Series other than RoHS Directive-compliant cannot be connected. Extension Cables for US Series Extension cable for connecting the motor and control unit. The maximum extension length is 4.75 m. Types US06, US315, US45, US540 Types Product Name ength (m) CC01SU05 1 CC0SU05 CC03SU05 3 CC04SU05 4 US560, US590 Types Product Name ength (m) CC01SU07 1 CC0SU07 CC03SU07 3 CC04SU07 4 ϕ7.8 Housing: P (MOEX) ϕ11. Housing: P (MOEX) Housing: R (MOEX) Control Unit Side Housing: R (MOEX) Control Unit Side Note These cables are for exclusive use with products that conform to the RoHS Directive. Since the connector is different, the US Series other than RoHS Directive-compliant cannot be connected. Connection Cables for FE100/FE00 These cables are needed when connecting the motor and inverters (FE100/FE00) or extending their wiring length. Types Product Name ength (m) CC01AC04 1 CC0AC04 CC03AC04 3 CC05AC04 5 CC10AC04 10 CC0AC04 0 Brushless Motors AC Control Motors Inverters Accessories Control Motors Introduction BX BE AXU FB DC Input BH MSS W US ES01/ ES0 FE100/ FE00 00 W BHF Cables Indicator Others Installation ϕ10 max. Cable Cores 4-Core: U Style 366, AWG14 4 B-197

6 Control Motors Cables Indicator Control Modules Motor Indicator To display or check the speed of the speed control motor, connect the speed indicator. Connection examples to applicable products Page B-199 Digital Display Type Product Name: SDM496 Power Supply Voltage: Single-Phase 100 VAC to 40 VAC This product is a digital speed indicator that directly displays the speed at the output shaft of the motor or gearhead. This product is not a standard certified product. Applicable Products BE Series, AXU Series, FB Series, BH Series MSS W Series, US Series ES01/ES0, BHF Series External Regeneration Units Potentiometer DIN Rail Mounting Plates Front Cover Mounting Brackets Couplings Mass: 00 g A max max max. The following items are included in each product. Motor Indicator, Adapter for Recessed Mounting, Round Shape Socket, Unit Seal, Operating Manual Dimensions with Adapter Attached (Unit = mm) Flush Mounting Socket for Installing DIN Rail (Sold separately) Use this flush mounting socket when installing the motor speed indicator to a DIN rail. Product Name: EP11PF Dimensions (Unit = mm) Mass: 75 g 51 max max. ϕ M 3.5 Screws ±0. 85 max max Round Shape Socket Adapter for Recessed Mounting Mounting Hole Dimensions (Mounting plate thickness 1 to 3. mm) R0.5 max B-198 ORIENTA MOTOR GENERA CATAOGUE

7 Connection Examples BE Series (30 pulses/rotation) SDM496 SPEED Input Signal GND 1 Pulses/30 Pulses Selection Driver SPEED OUT (+) SPEED OUT () Customer Support Centre Singapore: , Malaysia: , Others: BE Series - FB Compatibility Mode (1 pulses/rotation) SDM496 Driver SPEED Input Signal 7 GND 5 1 Pulses/30 Pulses Selection 6 Not Connected SPEED OUT (+) SPEED OUT () Control Motors Power Supply Input Single-Phase VAC 50/60 Hz FG AXU Series, BH Series (30 pulses/rotation) SDM496 SPEED Input Signal GND 1 Pulses/30 Pulses Selection Power Supply Input Single-Phase VAC 50/60 Hz FG Driver SPEED OUT GND The AXU Series uses "COM. " Power Supply Input Single-Phase VAC 50/60 Hz FB Series (1 pulses/rotation) MSS W Series, US Series ES01/ES0 SDM496 Controller Tachogenerator Input Signal 1 Tachogenerator Input Signal 11 Power Supply Input Single-Phase VAC 50/60 Hz FG 10 9 SPEED OUT No Polarity FG 10 9 SPEED Input Signal 7 GND 5 1 Pulses/30 Pulses Selection 6 Not Connected Power Supply Input Single-Phase VAC 50/60 Hz FG FG SDM SDM Driver ES01/ES0 SPEED OUT GND To Tachogenerator of Control Motor Tachogenerator Input Signal 1 10 Blue Tachogenerator Input Signal Blue Power Supply Input Single-Phase VAC 50/60 Hz Brushless Motors AC Control Motors Introduction BX BE AXU FB DC Input BH MSS W US ES01/ ES0 BHF Series SPEED Input Signal 7 GND 5 1 Pulses/30 Pulses Selection 6 Not Connected Power Supply Input Single-Phase VAC 50/60 Hz FG SDM Inverter S-MON 0-COM Inverters Accessories FE100/ FE00 00 W BHF Cables Indicator Others Installation B-199

8 Control Motors Cables Indicator Control Modules External Regeneration Units Potentiometer DIN Rail Mounting Plates Front Cover Mounting Brackets Couplings Control Modules With these control modules, various data setting and digital displays are possible. Product Name: OPX-1A (Communication cable m included) Applicable Product BX Series Mass: 0.07 kg C Panel Cut-Out for Control Module (Mounting plate thickness 1 to 3 mm) Panel Cut-Out Dimensions 44.5 Product Name: OPX-A Applicable Product BE Series Mass: 0.5 kg 7 B Cables ϕ4.7, 5000 mm External Potentiometer ϕ11. Panel Cut-Out for Control Module (Mounting plate thickness 1 to 3 mm) (Enlarged view) Product Name: PAVR-0KZ (0 kω, 1/4 W, with a linear resistance vs. angle curve) Mass: 0 g A min M4 6 Deep (Set screw) ( 40 ) 7.5 Applicable Products BX Series 1 BE Series 1 FB Series BH Series MSS W Series 1 ES01/ES0 1 BHF Series ϕ0 ϕ.8 Potentiometer Insulation Sheet ( 40 t=0.5) ϕ0 3 Knob Scale Plate ( 40 t=0.5) ( 40 ) Recommended thickness of a mounting plate is 4.5 mm max. 1.5 ϕ3±0. ϕ9.5±0. Insulation Sheet Notes 1 One external speed potentiometer set is included. Use when setting the speed in multiple stages. The external speed potentiometer is not included. Use when setting the speed with the external speed potentiometer. B-00 ORIENTA MOTOR GENERA CATAOGUE

9 Regeneration Units Customer Support Centre Singapore: , Malaysia: , Others: Use the regeneration unit when using the electromagnetic brake type for vertical operation or when braking a large inertial load quickly. Product Name: EPRC-400P Product Name: RGB100 Mass: 50 g C R: 150 Ω 150 C(NC) The EPRC-400P is 400 Ω. ϕ AWG18 White AWG White Specifications Product Name EPRC-400P RGB100 Applicable Products BX30, BX460, BX510 BE Series BHF Series BX600, BX6400 Continuous Regenerative Power W 100 W Resistance Value 400 Ω 150 Ω Thermostat Operating Temperature Thermostat Rated Electricity 14: AWG18 For regeneration current Connect to RG Terminal. 3: AWG BX Series, BE Series: Connect to thermal protector for signal BHF Series: Connect between I-COM and TP terminals DIN Rail Mounting Plates Open: 150±7 C Close: 145±1 C (Normally closed) 10 VAC 4A 30 VDC 4A (Minimum current 5 ma) Open: 150±7 C Close: 145±1 C (Normally closed) 10 VAC 4A 30 VDC 4A (Minimum current 5 ma) 1 Install the regeneration unit in the place which has the same heat radiation capability as the heat radiation plate (Material: aluminum mm, 3 mm thick). These mounting plates are convenient for installing the drivers and speed controllers on DIN rails with ease. Product Name: PADP01 Mass: 0 g Applicable Products MSS W Series BHF Series A1019 Mounting Screws: Three M3 8 mm screws included Center of DIN Rail Brushless Motors AC Control Motors Inverters Accessories Control Motors Introduction BX BE AXU FB DC Input BH MSS W US ES01/ ES0 FE100/ FE00 00 W BHF Cables Indicator Others 16.8 Installation B-01

10 Control Motors Cables Indicator Product Name: PADP03 Mass: 30 g Applicable Products A100 BX Series Mounting Screws: Four M3 8 mm screws included BE Series 38 5 FB Series Center of DIN Rail Control Modules External Regeneration Units Potentiometer Front Cover 15.8 DIN Rail Mounting Plates This clear cover is placed on the front panel face of the inverters FE100/FE00. This cover prevents accidental contact with the speed potentiometer and resulting shifts in the set speed. The front cover is not waterproof. Front Cover Mounting Brackets Product Name: PAFC01 Applicable Products FE100/FE00 <Application Example> Mass: 10 g Couplings 104 B-0 ORIENTA MOTOR GENERA CATAOGUE

11 Customer Support Centre Singapore: , Malaysia: , Others: Motor and Gearhead Mounting Brackets These dedicated mounting brackets are for mounting motors and gearheads. They are the highstrength type, which can be used with high power motors and gearheads. These mounting brackets come with tapped holes. To mount the motor and gearhead, simply fasten with the screws provided with the gearhead. To mount the motor alone, mounting screws must be purchased separately. Product ine Material: Aluminum Alloy Applicable Products Product Name Brushless Motors, AC Control Motors, Inverters Brushless Motors Round Shaft Type 1 Gearheads SO0M3 BH015K-A SO0B BH015K- SOM4 SO3M5 SO4M5 SO4M6 SO5M6 SO5M8 BX30 (M)- S, BX30 (M)-A BE3 S-, BE3 A- AXU10 -A BH30K-, BH30K-A BX460 (M)- S, BX460 (M)-A BE46 S-, BE46 A- AXU45 -A BH450K-, BH450K-A BX510 (M)- S, BX510 (M)-A BE51 S-, BE51 A- AXU540 -A, AXU590 -A FB575 W-, FB575 W-A FB510 W-, FB510 W-A BH5100K-, BH5100K-A MSS06, US06, IK6RA, RK6RA MSS315, US315, 3IK15RA, 3RK15RA MSS45, US45, 4IK5RA, 4RK5RA MSS540, MSS560, MSS590, US540, US560, US590, 5IK40RA, 5RK40RA, 5IK60RA, 5RK60RA GN K 3GN K 4GN K 5GN K 5GU KB, 5GE KB 5GU KBH Brushless Motors AC Control Motors Control Motors Introduction BX BE AXU FB DC Input BH MSS W US ES01/ ES0 SO6M8 BX600 (M)- S, BX600 (M)-A BX6400S (M)- S, BX6400S (M)-A BHF6 T-, BHF6 MT-, BHF6 T-A, BHF6 MT-A 1 The round shaft type applicable products are listed with the series name and with up to the first character by which the output can be determined. This is a combination type product name. A letter and number indicating the power supply voltage is entered where the box is located within the product name. A number indicating the gear ratio is entered where the box is located within the product name. A number indicating the desired connection cable length of 1 (1 m), ( m) or 3 (3 m) is entered where the box is located within the product name. Notes Not available for the following products 5GU K Right-angle gearheads ( RHtype, RAtype) Right-angle shaft types ( BHF Series) Hollow shaft flat gearheads ( GFSG FR, GFS4G FR, GFS5G FR) Dimensions Page A-50 Inverters Accessories FE100/ FE00 00 W BHF Cables Indicator Others Installation B-03

12 Control Motors Cables Indicator Control Modules External Regeneration Units Potentiometer DIN Rail Mounting Plates Front Cover Mounting Brackets Couplings Flexible Couplings These are clamp type couplings for connecting the motor/gearhead shaft with the driven shaft. Once the motor or gearhead is determined, the coupling can be selected. Features Can be used with high torque Excellent for preventing eccentricity The structure features a separated hub and sleeve, so workability during installation is improved. Hub Material: Aluminum Alloy Applicable Coupling Types Product Number Code MC Flexible Coupling Outer Diameter Dimension of Coupling 0: ϕ0 mm 65: ϕ65 mm 3 Inner Diameter d1 (Smaller side) 05: ϕ5 mm 5: ϕ5 mm 4 For the MC5518 type only, some types include a K depending on the key slot width. 5 Inner Diameter d (arger side) 05: ϕ5 mm 5: ϕ5 mm Product ine Product Name MC0 MC30 MC40 MC55 MC65 A number indicating the coupling inner diameter is entered where the box is located within the product name. Brushless Motors Couplings can also be used with round shaft types. Select a coupling with the same inner diameter size as the motor shaft diameter. MCS couplings are used with the BX Series round shaft type. Page C-89 : Uniform oad : Compatible with uniform and shock load Shaft Diameter Applicable Driven Shaft Diameter mm Uniform oad Shock oad Coupling Type mm ϕ5 ϕ6 ϕ8 ϕ10 ϕ1 ϕ14 ϕ15 ϕ16 ϕ18 ϕ0 ϕ ϕ5 BH015K- BH015K- MC0 ϕ6 BX30 (M)- S BE3 S- BH30K- BX460 (M)- S BE46 S- BH450K- BX30 (M)- S BE3 S- BH30K- BX460 (M)- S BE46 S- BH450K- Sleeve Material: Polyurethane MC30 ϕ10 MC40 ϕ15 ϕ15 BX510 (M)- S BE51 S- FB575 W- FB510 W- BH5100K- BX600 (M)- S BX6400S (M)- S BX510 (M)- S BE51 S- FB575 W- FB510 W- BH5100K- BX600 (M)- S BX6400S (M)- S MC55 ϕ18 MC65 ϕ The load types in this table are guidelines. Check the specifications values of each coupling for details. A, C, or S indicating the power supply voltage is entered where the box is located within the product name. A number indicating the gear ratio is entered where the box is located within the product name. A number indicating the desired connection cable (included) length of 1 (1 m), ( m) or 3 (3 m) is entered where the box is located within the product name. B-04 ORIENTA MOTOR GENERA CATAOGUE

13 Customer Support Centre Singapore: , Malaysia: , Others: Brushless Motors, AC Control Motors, Inverters The round shaft type can also be used. Select a coupling inner diameter size that is the same as motor shaft diameter. : Uniform oad : Compatible with uniform and shock load Shaft Diameter Applicable Driven Shaft Diameter mm Uniform oad Shock oad Coupling Type mm ϕ5 ϕ6 ϕ8 ϕ10 ϕ1 ϕ14 ϕ15 ϕ16 ϕ18 ϕ0 ϕ ϕ5 0GN K 0GN K ϕ5 MC0 GN K ϕ8 GN K ϕ8 3GN K 4GN K 4GN RA 5GN K 5GN RA 5GE KB 5GU KB, 5GU K 5GE RA, 5GU RA 3GN K ϕ10 MC30 4GN K 4GN RA 5GN K 5GN RA 5GE KB 5GU KB, 5GU K 5GE RA, 5GU RA ϕ1 MC40 ϕ10 ϕ1 ϕ15 MC55 ϕ15 BHF6 (M)T- ϕ18 5GU KBH 5GU KBH MC5518K ϕ18 BHF6 (M)T- ϕ18 MC65 BHF6 (M)T- RA BHF6 (M)T- RA ϕ The load types in this table are guidelines. Check the specifications values of each coupling for details. The MC5518K type is a dedicated type used with 5GU KBH. A, C, or S indicating the power supply voltage is entered where the box is located within the product name. A number indicating the gear ratio is entered where the box is located within the product name. Page A-53 Page A-55 Page A-55 Applicable Products Specifications Dimensions Brushless Motors AC Control Motors Control Motors Introduction BX BE AXU FB DC Input BH MSS W US ES01/ ES0 FE100/ FE00 00 W BHF Cables Indicator Others Inverters Accessories Installation B-05

14 Control Motors B-06 ORIENTA MOTOR GENERA CATAOGUE