Price list 2016 MODERN ARCHITECTURE NEEDS POWERFUL TECHNOLOGY. Valid from January 1st 2016

Transcription

1 Price list 2016 MODERN ARCHITECTURE NEEDS POWERFUL TECHNOLOGY Valid from January 1st

2 2 Welcome to Sita!

3 Content Your contacts 4 Sita roof outlets Possible combinations 6 for conventional and emergency drainage SitaStandard 7 SitaTrendy screw-on-flange 8 SitaTrendy 9 SitaMulti 10 Sita accessories for roof outlets SitaMore 11 Sita roof outlets Possible combinations 12 for siphonic and emergency drainage SitaDSS Ravana 13 SitaDSS Profi 14 SitaDSS Profi screw-on-flange 14 SitaDSS Multi cast outlet 15 Sita Attika outlets Possible combinations 16 for conventional and emergency drainage SitaTurbo 17 SitaRondo 18 SitaSpy 18 SitaIndra SitaEasy Sita pipe system SitaAttika pipe system 23 Sita retrofit outlets Possible combinations 25 SitaSani retrofit outlets 26 SitaSani DSS 28 Sita balcony and garage drainage Possible combinations 29 SitaCompact 30 SitaCompact screw-on-flange 30 SitaMini 32 SitaCarport 32 Sita green roof drainage SitaGreen 33 SitaVent roof ventilators Possible combinations 34 SitaVent system vent 35 SitaVent refurbishment vent 35 SitaVent pipe fairlead 35 Sita drainage grates SitaDrain box drain (galvanised) 36 SitaDrain box drain (stainless steel) 37 SitaDrain Klassik (galvanised) 38 SitaDrain Klassik (stainless steel) 38 SitaDrain Endlos (galvanised) 39 SitaDrain Terra 39 SitaDrain accessories 39 Sita fire protection SitaFiresafe 40 Sita accessories 41 Connection sleeves with article end numbers Required connection sleeves 42 Sita terms of trading 43 3

4 Sita Contact Partners Sita Bauelemente GmbH/UK Sita Bauelemente GmbH/UK: Bernard Rawlings 4 Clare Wood Drive Clare Lane West Malling Kent. ME19 6PA UK Phone +44 (0) Cell +44 (0) b.rawlings@sita-bauelemente.de Export Manager Ferdinand-Braun-Straße 1 D Rheda-Wiedenbrück Phone +49 (0) Cell +49 (0) (GER) u.happe@sita-bauelemente.de Export Manager: Udo Happe Customer Service Manager Ferdinand-Braun-Straße 1 D Rheda-Wiedenbrück Phone +49 (0) k.friedrich@sita-bauelemente.de Customer Service Manager: Kurt Friedrich Sales Department Export Ferdinand-Braun-Straße 1 D Rheda-Wiedenbrück Phone +49 (0) s.grotegut@sita-bauelemente.de Ferdinand-Braun-Straße 1 D Rheda-Wiedenbrück Phone +49 (0) n.kowal@sita-bauelemente.de Sales Department Export: Sarah Grotegut Sales Department Export: Natalia Kowal The Sita Calculation Service supports you with your building project: Our consultants can help you from the calculation of the complete system up to technical drawings within the floor plans. Use the telephone advice of our drainage experts! A short question, a useful tip or a complete calculation? We are happy to help: Fon +44 (0) b.rawlings@sita-bauelemente.de 4

5 The security of a leading brand comes as standard with Sita. When looking for an experienced, reliable and fair partner, you will automatically come to Sita. The name of Sita has for decades stood for excellence in ventilation, drainage and emergency drainage in the flat roof sector. Each product comes with the experience gained from the production of many millions of quality rainwater outlets and accessories. A committed, competent advisory team is always there for you. Our application technology supports you from consultation through computation, up to graphic representation. Sita provides you with all the security of a company certified to DIN EN ISO 9001 and Own production and warehousing ensure product quality and security. 5

6 Sita roof outlets Conventional drainage Possible combinations SitaStandard, vertical SitaStandard, angled SitaMulti, vertical SitaTrendy, vertical SitaTrendy, angled SitaTrendy screw-on-flange, vertical SitaTrendy screw-on-flange, angled Insulation body for extension units SitaFiresafe for preventative fire safety SitaMore retaining element for effective emergency drainage SitaStandard extension unit SitaMulti extension unit SitaTrendy extension unit SitaTrendy screw-on-flange extension unit SitaMore terrace kit SitaMulti grating frame SitaMore reinforcement plate for steel trapezoidal plate roofs SitaMulti insulating body for roof outlets and extension units SitaAttika pipe system SitaMore pipe sleeve heating system Insulating body SitaMore dome grate Allround 6

7 Sita roof outlets Conventional drainage SitaStandard The roof outlet with integrated connection sleeve SitaStandard, vertical Polyurethane, thermally insulated, to GET and DIN EN 1253, with integrated selected connection sleeve, with dome grate. Heated model As described above, but with self-regulating heating element 230 V, approx. 10 W and a 2 meter long connecting cable for 230 V. No transformer required. ** Including SitaTherm safety heating system. DN DN/OD * Part No. Price xx xx xx xx xx xx xx xx xx 200 ** xx SitaStandard, angled Polyurethane, thermally insulated, to GET and DIN EN 1253, with integrated selected connection sleeve, with dome grate. ** With flush transition from DN DN xx xx 125 ** xx Heated model As described above, but with self-regulating heating element 230 V, approx. 10 W and a 2 meter long connecting cable for 230 V. No transformer required. Inclination 3. ** With flush transition from DN DN xx xx 125 ** xx SitaStandard extension unit Polyurethane, thermally insulated, to GET and DIN EN 1253, with sealing ring for insulation material thicknesses of mm. With integrated selected connection sleeve. Insulation Part No. Price thickness (mm) xx xx xx SitaStandard stepped outlet Polyurethane, thermally insulated, to GET and DIN EN 1253, with integrated polymeric bitumen, plastic or EPDM sleeve, with dome grate. DN DN/OD * Part No. Price xx SitaMore retaining element for the SitaStandard For SitaStandard roof outlets and extension units, for emergency drainage to DIN Retaining height of mm. With cover, height-adjustable feet and sealing ring with multiple lips SitaStandard insulating body Extruded polystyrene foam (XPS) WLG 037, BSK B2/E*, to act as thermal insulation and installation aid for the SitaStandard roof outlet vertical to DN 125. Model Part No. Price SitaStandard E vertical * Building material class according to DIN / DIN EN ISO NEW! Insulation body for extension units Insulation body for extension units made from polyurethane, 500 x 500 x 100 mm, thermal conductivity λ = 0,025 W/m K, compressive strength 200 kpa, density 50 kg/ m³, BSK B2/E* as an installation aid and insulation for the prevention of thermal bridges. * Building material class according to DIN / DIN EN ISO Series Part No. Price SitaStandard Important! Specify the connection sleeve in your order (xx) (see page 42). 7

8 Sita roof outlets Conventional drainage SitaTrendy screw-on-flange SitaTrendy screw-on-flange, vertical Polyurethane, thermally insulated, to GET and DIN EN 1253, with screw-on-flange for clamping the bitumen, plastic or EPDM roofing membrane, with dome grate and sealing sleeve. The smaller roof outlet with screw-on-flange DN DN/OD* Part No. Price Heated model As previous description, but with self-regulating heating element 230 V, approx. 10 W and a 2 meter long connecting cable. No transformer required SitaTrendy screw-on-flange, angled Polyurethane, thermally insulated, to GET and DIN EN 1253, with screw-on-flange for clamping the bitumen, plastic or EPDM roofing membrane, with dome grate and sealing sleeve. Inclination ** Heated model As previous description, but with self-regulating heating element 230 V, approx. 10 W and a 2 meter long connecting cable. No transformer required. ** With flush transition from DN DN ** SitaTrendy screw-on-flange extension unit Polyurethane, thermally insulated, according to GET and DIN EN 1253, for SitaTrendy SitaTrendy screw-on-flange roof outlets, with sealing ring, sealing sleeves and screw-on-flange for clamping the bitumen, plastic- or EPDM roofing membrane, to thicknesses of insulating material from mm. Insulation Part No. Price thickness (mm) SitaMore retaining element for the SitaTrendy For emergency drainage of DIN , of PA6, for SitaTrendy and SitaTrendy screw-on-flange roof outlets and extension units. Retaining from mm. With cover, height adjustable feet and sealing ring with multiple lips SitaTrendy insulating body Extruded polystyrene foam (XPS) WLG 037, BSK B2/E*, to act as thermal insulation and installation aid for the SitaTrendy and SitaTrendy screw-on-flange roof outlet. * Building material class according to DIN / DIN EN ISO Series Part No. Price SitaTrendy/ E SitaTrendy Screw-on-flange vertical NEW! Insulation body for extension units Series Part No. Price Insulation body for extension units made from polyurethane, 500 x 500 x 100 mm, thermal conductivity λ = 0,025 W/m K, compressive strength 200 kpa, density 50 kg/ m³, BSK B2/E* as an installation aid and insulation for the prevention of thermal bridges. SitaTrendy * Building material class according to DIN / DIN EN ISO

9 Sita roof outlets Conventional drainage SitaTrendy The smaller roof outlet with integrated connection sleeve SitaTrendy, vertical Polyurethane, thermally insulated, to GET and DIN EN 1253, with integrated selected connection sleeve, with dome grate. DN DN/OD* Part No. Price xx xx xx xx Heated model As described above, but with self-regulating heating element 230 V, approx. 10 W and a 2 meter long connecting cable for 230 V. No transformer required xx xx xx SitaTrendy, angled Polyurethane, thermally insulated, to GET and DIN EN 1253, with integrated selected connection sleeve, with dome grate. Inclination xx xx 125 ** xx Heated model As described above, but with self-regulating heating element 230 V, approx. 10 W and a 2 meter long connecting cable for 230 V. No transformer required xx xx xx ** With flush transition from DN DN 125 SitaTrendy extension unit Polyurethane, to GET and DIN EN 1253, for SitaTrendy SitaTrendy screw-on-flange roof outlet, thermally insulated, with sealing ring, for insulation material thicknesses of mm. With integrated selected connection sleeve. Insulation Part No. Price thickness (mm) xx xx xx SitaMore retaining element for the SitaTrendy For emergency drainage of DIN , of PA6, for SitaTrendy and SitaTrendy screw-on-flange roof outlets and extension units. Retaining from mm. With cover, height adjustable feet and sealing ring with multiple lips SitaTrendy insulating body Extruded polystyrene foam (XPS) WLG 037, BSK B2/E*, to act as thermal insulation and installation aid for the SitaTrendy and SitaTrendy screw-on-flange roof outlet. * Building material class according to DIN / DIN EN ISO Series Part No. Price SitaTrendy/ E SitaTrendy Screw-on-flange vertical NEW! Insulation body for extension units Series Part No. Price Insulation body for extension units made from polyurethane, 500 x 500 x 100 mm, thermal conductivity λ = 0,025 W/m K, compressive strength 200 kpa, density 50 kg/ m³, BSK B /E* as an installation aid and insulation for the prevention of thermal bridges. SitaTrendy * Building material class according to DIN / DIN EN ISO Important! Specify the connection sleeve in your order (xx) (see page 42). 9

10 Sita roof outlets Conventional drainage SitaMulti cast iron outlet The cast iron roof outlet with fire safety class A1 SitaMulti, vertical Cast iron, material EN-GJL-200, to GET and DIN EN 1253, with screw-on-flange for clamping the bitumen, plastic or EPDM roofing membrane and metal gutters, with dome grate and sealing sleeve. Suitable for F90 construction. SitaMulti extension unit Cast iron, material EN-GJS-200, to GET and DIN EN 1253, with screw-on-flange for clamping the bitumen, plastic or EPDM roofing membrane and metal gutters, for insulation material thicknesses of mm. DN DN/OD* Part No. Price SitaMulti grating frame Cast iron, material EN-GJS-500-7, consisting of: support ring, grating and bolted end grate. For height adjustment of mm for SitaMulti roof outlet. In steps of 10 mm SitaMulti height adjustment unit Cast iron, material EN-GJS For height adjustment of mm with SitaMulti grating frame. In steps of 10 mm E SitaMore retaining element for the SitaMulti For emergency drainage of DIN , of PA6, for SitaMulti roof outlets and extension units. Retaining from mm. With cover, height adjustable feet and sealing ring with multiple lips. ** With a backwater height of 30 to 50 mm it is necessary to shorten the threaded pin of the drain component ** SitaMulti insulating body type A Cellular glass, WLG 040, for thermal insulation for SitaMulti roof outlets and for concreting straight in. Can be used as lost formwork. Height 120 mm. 120 E SitaMulti compensating ring For insulating body type A, of cellular glass, WLG 040, for adjustment of concrete thicknesses over 120 mm. 40 E E SitaMulti insulating body type B For roof outlet, of cellular glass, WLG 040, for thermal insulation of SitaMulti roof outlet DN 80 / 100 and SitaMulti extension unit in connection with SitaMulti ground plate. Height 120 mm. 120 E SitaMulti construction period protective cover To protect the drainage system during construction. Part No. Price E Metal prices can be adjusted with regard to the market situation during the whole year.

11 Sita accessories for roof outlets SitaMore accessories SitaMore safety heating system For heating roof outlets and pipelines, self-regulating PTC heating element with a heat rating of approx. 10 W at -20 C and 230 V, with cable ties for easy securing to pipes or roof outlets. No transformer required. With a 2 metre cable. Power supply Part No. Price 230 V (approx. 10 W) SitaMore reinforcement plate To reinforce small orifices to DIN Dimensions: 600 x 600 x 1.25 mm. Diameter Part No. Price 152 mm for Sita system vent DN Diameter Part No. Price 250 mm for SitaStandard, SitaTrendy, SitaTrendy screw-on-flange, SitaMulti, SitaDSS Profi, SitaDSS Multi and SitaSystem vent DN SitaMore dome grate Allround Polyamide, for outlets with a pot diameter of 60 to 200 mm. With expanding feet and rotational function for securing the dome grate in the outlet pot. Clamping range Part No. Price from to (mm) E Sita insulation body For SitaStandard to DN 125, SitaTrendy / SitaTrendy screw-onflange and SitaCompact / SitaCompact screw-on-flange made of extruded polystyrene foam (XPS) WLG 037, BSK B2/E*, to act as thermal insulation and installation air for Site roof outlets. * Building material class according to DIN / DIN EN ISO Series Part No. Price SitaStandard E SitaTrendy / SitaTrendy E Screw-on-flange SitaCompact / Sita Compact E Screw-on-flange NEW! Insulation body for extension units Series Part No. Price Insulation body for extension units made from polyurethane, 500 x 500 x 100 mm, thermal conductivity λ = 0,025 W/m K, compressive strength 200 kpa, density 50 kg/ m³, BSK B2/E* as an installation aid and insulation for the prevention of thermal bridges. SitaTrendy * Building material class according to DIN / DIN EN ISO SitaAttika pipe system Made from stainless steel for leading the rainwater through the parapet. See pages SitaMore retaining elements for the SitaStandard or the SitaTrendy For emergency drainage to DIN , made of polyamide, for SitaStandard and SitaTrendy and extension units. Retaining from mm. With cover, height-adjustable feet and sealing ring with multiple lips. Model Part No. Price SitaStandard SitaTrendy SitaFiresafe For preventative fire safety and to prevent fire spreading from below with small penetrations to DIN part 3 and 4. See page

12 Sita roof outlets Emergency drainage Possible combinations SitaDSS Profi SitaDSS Profi SitaDSS Multi SitaDSS Profi SitaDSS Profi SitaDSS Multi SitaDSS Ravana screw-on-flange screw-on-flange Insulation body for extension units SitaFiresafe for preventive fire safety SitaDSS retaining element for effective emergency drainage SitaDSS Profi extension unit SitaDSS Profi screw-on-flange extension unit SitaDSS Multi extension unit SitaDSS Multi insulating body for roof outlets and extension units SitaMore pipe sleeve heating system SitaDSS Ravana extension unit SitaDSS Ravana retaining element 12

13 Sita roof outlets Siphonic drainage SitaDSS Ravana The siphonic rainwater outlet for use in narrow gutters and in restricted locations SitaDSS Ravana with screw-on flange and airstop SitaDSS Ravana gutter rainwater outlet for siphonic drainage, made from stainless steel (Material no ), according to EN 1253 with quality standard RAL-GZ Guetezeichen-694, loose flange made from stainless steel (Material no ), with welding pins to accommodate the airstop, with the screwon flange for clamping the bitumen, plastic or EPDM roofing membrane and metal gutters. Size DN/OD* Part No. Price 50/ SitaDSS Ravana extension unit Height mm, SitaDSS Ravana extension unit, made from stainless steel (Material no ), according to EN 1253 with quality standard RAL- GZ Guetezeichen 694, insulation height of mm, with pre-drilled holes for fixing the component loose flange, made from stainless steel (Material no ), clamping ring for clamping the bitumen, plastic or EPDM roofing membranes or metal gutters. Insulation thickness Part No. Price from to (mm) SitaDSS Ravana retaining element SitaDSS Ravana retaining element for emergency drainage for SitaDSS Ravana gutter outlet, made from stainless steel (Material no ), according to EN 1253 and quality standard RAL-GZ Guetezeichen- 694, accumulation height of 30 to 150 mm, with flow rate of 14.1 I/s full pipe at a water column of 43 mm, according to pren :2013. Retaining height Part No. Price from to (mm) Metal prices can be adjusted with regard to the market situation during the whole year. 13

14 Sita roof outlets Siphonic drainage SitaDSS Profi SitaDSS Profi screw-on-flange SitaDSS Profi Polyurethane, thermally insulated, according to GET and DIN EN 1253, with integrated selected connection sleeve, with SitaAirstop and dome grate. The siphonic outlet with integrated connection sleeve or screw-on-flange DN DN/OD* Part No. Price xx xx SitaDSS Profi Polyurethane without SitaAirstop for emergency drainage, thermally insulated, to DIN EN 1253 with integrated selected connection sleeve. To be used in combination with the Sita retaining element for SitaDSS Profi and SitaDSS Profi screw-on-flange only. SitaDSS Profi extension unit Polyurethane, to GET and DIN EN 1253, thermally insulated, with sealing ring for insulation material thicknesses of mm. With integrated selected connection sleeve. SitaDSS Profi screw-on-flange Polyurethane, thermally insulated, to GET and DIN EN 1253, with screw-on-flange for clamping the bitumen, plastic or EPDM roofing membrane, with SitaAirstop, dome grate and sealing sleeves. DN DN/OD* Part No. Price xx xx Insulation Part No. Price thickness (mm) xx xx xx DN DN/OD* Part No. Price SitaDSS Profi screw-on-flange Polyurethane without SitaAirstop for emergency drainage, thermally insulated, to DIN EN 1253 with screw-on-flange for clamping bitumen, plastic and EPDM roofing membranes. To be used in combination with the Sita retaining unit for SitaDSS Profi and SitaDSS Profi screw-on-flange only. SitaDSS Profi screw-on-flange extension unit Polyurethane, thermally insulated, according to GET and DIN EN 1253, with sealing ring, sealing sleeves and screw-on-flange for clamping the bitumen, plastic or EPDM roofing membrane, for thicknesses of insulating material to mm. SitaRetaining element For emergency drainage of DIN , of PA6, for SitaDSS Profi and SitaDSS Profi screw-on-flange roof outlets and extension units. Retaining height of mm. With cover, 3 heightadjustable feet and sealing ring with multiple lips. DN DN/OD* Part No. Price Insulation Part No. Price thickness (mm) NEW! Insulation body for extension units Series Part No. Price Insulation body for extension units made from polyurethane, 500 x SitaDSS Profi x 100 mm, thermal conductivity λ = 0,025 W/m K, compressive strength 200 kpa, density 50 kg/ m³, BSK B2/E* as an installation aid and insulation for the prevention of thermal bridges. * Building material class according to DIN / DIN EN ISO Important! Specify the connection sleeve in your order (xx) (see page 42).

15 Sita roof outlets Siphonic drainage SitaDSS Multi cast outlet (See page 11 for more accessories) SitaDSS Multi Cast iron, material EN-GJS-500-7, according to GET and DIN EN 1253, with screw-on-flange for clamping the bitumen, plastic or EPDM roofing membrane and metal gutters, with SitaAirstop, dome grate and sealing sleeves. Suitable for F90 construction. The siphonic outlet with screw-on-flange DN DN/OD* Part No. Price SitaDSS Multi Cast iron material EN-GJL-200, without SitaAirstop for emergency drainage, to DIN EN 1253 with screw-on-flange for clamping the bitumen, plastic or EPDM roofing membrane and metal gutters. To be used in combination with the Sita retaining element for SitaDSS Multi screw-on-flange only. SitaMulti extension unit Cast iron, material EN-GJS-200, to GET and DIN EN 1253, with screw-on-flange for clamping the bitumen, plastic or EPDM roofing membrane and metal gutters, for insulation material thicknesses of mm. DN DN/OD* Part No. Price Insulation Part No. Price thickness (mm) SitaRetaining element For emergency drainage to DIN , made of polyamide, for SitaDSS Multi roof outlets and extension units. Retaining height of mm. With cover, height adjustable feet and sealing ring with multiple lips SitaMulti insulating body type A Cellular glass, WLG 040, for thermal insulation for SitaMulti roof outlets and for concreting straight in. Can be used as lost formwork. Height 120 mm. 120 E SitaMulti compensating ring For insulating body type A, of cellular glass, WLG 040, for adjustment of concrete thicknesses over 120 mm. 40 E E SitaMulti insulating body type B For roof outlet, of cellular glass, WLG 040, for thermal insulation of SitaMulti roof outlet DN 80 / 100 and SitaMulti extension unit in connection with SitaMulti ground plate. Height 120 mm. 120 E SitaMulti construction period protective cover To protect the drainage system during construction. Part No. Price E Metal prices can be adjusted with regard to the market situation during the whole year. 15

16 SitaAttika outlets Conventional Emergency drainage Possible combinations SitaTurbo SitaRondo SitaEasy SitaEasy Plus SitaEasy Go SitaSpy SitaIndra main drainage kit emergency drainage kit SitaDSS Indra main drainage kit emergency drainage kit SitaTurbo Steam vapour barrier flex SitaAttika pipe system SitaTurbo adapters to round pipe SitaTurbo adapters to square pipe SitaCladdingcover plate Vapour barrier plate flex for round pipe SitaEasy dome grate SitaDrain Terra SitaEasy Go dome grate 16

17 SitaAttika outlets Conventional Emergency drainage SitaTurbo (stainless steel) SitaTurbo Parapet outlet with rectangle pipe, according to GET and DIN EN 1253, of stainless steel (material-no ) with screw-onflange for clamping bitumen, plastic or EPDM roofing membrane. With sealing sleeves, threaded bolt, plain washer and nut M12, protecting cap and dome grate. The outlet for draining through the parapet Pipe length* (mm) Part No. Price 1, Cross section of pipe: 120 x 60 mm * Further pipe lengths are possible on request. suitable for emergency drainage SitaTurbo Parapet outlet with rectangle pipe for emergency drainage, to GET and DIN EN 1253, made of stainless steel (material No ), with screw-on-flange as retaining element for clamping bitumen, plastic or EPDM roofing membrane, with sealing sleeves, threaded bolt, plain washer, nut M12, protecting caps and top grating. Pipe length 1,000 mm. Pipe 1,000 mm* Part No. Price 25 mm retaining element mm retaining element mm retaining element mm retaining element * Further pipe lengths are possible on request SitaTurbo inverted roof Specially for the emergency drainage of inverted roofs. Available to order as a project-related special component. Parapet outlet with rectangle pipe to DIN EN 1253, made of stainless steel (material No ), with screw-on-flange as retaining element for clamping the protective fleece and with a flange plate welded to the rectangular pipe for clamping bitumen, plastic or EPDM roofing membrane, with sealing sleeves, threaded bolt, plain washer, nut M12, protecting caps and dome grate. SitaTurbo adapters on round fall pipe, with multi-disk seal For round rain fall pipe. DN/OD* Application Part No. Price 50/50 for SitaAttika pipe or plastic pipe /75 for SitaAttika pipe or plastic pipe /110 for SitaAttika pipe or plastic pipe /125 for SitaAttika pipe or plastic pipe /77 for rain fall pipe to DIN EN 612, 8-piece, round /97 for rain fall pipe to DIN EN 612, 6-piece, round /117 for rain fall pipe to DIN EN 612, 5-piece, round * OD = outer diameter (mm) SitaTurbo adapters on square fall pipe, with multi-disk seal For square rain fall pipe. DN/OD* Application Part No. Price 77 for rain fall pipe to DIN EN 612, 6-piece, square for rain fall pipe to DIN EN 612, 6-piece, square for rain fall pipe to DIN EN 612, 6-piece, square * OD = outer diameter (mm) SitaTurbo Steam vapour barrier flex For SitaTurbo parapet outlet with rectangle pipe, of EPDM, with reinforcement ring, with adhesive flange for the flexible steamtight connection of the vapour barrier. External dimension (mm) Part No. Price 374 x SitaTurbo Insulation body For SitaTurbo parapet outlet with rectangular pipe made of mineral fibre, WLG 040, BSK A1* and of polyurethane, WLG 030, BSK B2* three-piece, for thermal insulation and as installation aid for positioning the facade opening and the SitaTurbo vapour barrier plate. Material Part No. Price Mineral fibre, WLG Polyurethane, WLG XPS**, WLG *Building material class according to DIN / DIN EN ISO ** Insulating body made of extruded polystyrene-foam, BSK B2*, suitable for inverted roofs only. Metal prices can be adjusted with regard to the market situation during the whole year. 17

18 SitaAttika outlets Conventional Emergency drainage SitaTurbo (stainless steel) SitaTurbo cladding-cover plate Stainless steel, material number: , to cover the parapet or wall opening for the SitaTurbo Attika outlet with a material thickness of 1.5 mm. The outlet for draining through the parapet External dimension (mm) Part No. Price 220 x 180 E x 250 E SitaTurbo cover plate Polyethylene, to cover the SitaTurbo dome grate with a material thickness of 3.0 mm. External dimension (mm) Part No. Price 320 x SitaTurbo terrace kit Stainless steel. SitaTurbo terrace kit height adjustment set (4 pcs) External dimension (mm) Part No. Price 350 x SitaRondo (stainless steel) SitaRondo With run-off channel of stainless steel (material-no ), with screw-on-flange for clamping the bitumen, plastic or EPDM roofing membrane, with sealing sleeve and grate. The outlet for draining through the parapet DN DN/OD* Part No. Price SitaSpy (stainless steel) SitaSpy The stainless steel waterspout (material No ). Waterspout with an angle of 3 and a pipe length of 800 mm with sealing sleeves to clamp bitumen, plastic and EPDM roofing membranes. The outlet for draining through the parapet DN DN/OD* Part No. Price Accessories SitaSteam vapour barrier plate with round pipe For SitaRondo, SitaSpy, SitaEasy and SitaEasy Plus, of EPDM, with adhesive flange for the flexible steamtight connection of the vapour barrier. SitaAttika cladding-cover plate Stainless steel, material number: , to cover the parapet or wall opening for the SitaAttika drainage DN 50 to DN 150 with a material thickness of 1.5 mm. ** DN/ID = Internal diameter (mm) DN Part No. Price DN DN/OD** Part No. Price E E E E E Metal prices can be adjusted with regard to the market situation during the whole year.

19 SitaAttika outlets Conventional Emergency drainage SitaIndra The outlet for draining through the parapet SitaIndra main drainage kit Parapet outlet kit consists of inlet pot with selected connecting sleeve to GET/RAL and DIN 1253, 1 m stainless steel connecting pipe, securing clip, vapour barrier plate, dome grate and insulating body. Insulating body 1000 x 500 x 120 mm, inclination 1. DN DN/OD* Part No. Price xx SitaIndra emergency drainage kit Parapet outlet kit consists of inlet pot with selected connecting sleeve to GET/RAL and DIN 1253, 1 m stainless steel connecting pipe, securing clip, vapour barrier plate, retaining element and insulating body. Insulating body 1000 x 500 x 120 mm, inclination 1. DN DN/OD* Part No. Price xx SitaAttika cladding-cover plate Stainless steel, material number: , to cover the parapet or wall opening with a material thickness of 1.5 mm. DN DN/OD** Part No. Price E ** DN/ID = Internal diameter (mm) SitaMore terrace kit Cast aluminium, for roof outlets or extension units. Consisting of: height adjustment ring, grate frame (adjustable of mm) and grate for balcony top with included slots to pick up downpipes in nominal width DN 50 and DN 70. Model Part No. Price SitaIndra Important! Specify the connection sleeve in your order (xx) (see page 42). 19

20 SitaAttika outlets Conventional Emergency drainage SitaDSS Indra The siphonic drainage rainwater outlet through the parapet SitaDSS Indra main rainwater drainage set with angled parapet rainwater outlet, from polyurethane, thermally insulated, according to EN 1253 with increased quality standard according to RAL Quality Mark GZ-694, in the nominal size DN 70, flow rate 17.0 l/s at 45 mm head of water, with connecting pipe and safety clamps made of stainless steel, vapour barrier plate flex for safe connection to the vapour barrier and PUR insulating body. With large integrated selected connection sleeve (495 x 495 mm) suitable for roof waterproofing and with fixing ring for additional securing of the connection sleeve and for intake of the included gravel catch with airstop. Complete as set with optional 2.0 m, 3.0 m or 4.0 m downpipe including pipe clamps. NEW! Set variants DN/OD* Part No. Price 2.0 m downpipe (1 tube at 2000 mm) xx m downpipe (1 tube at 1000 mm + 1 tube at 2000 mm) 70/ xx m downpipe (2 tubes at 2000 mm) xx SitaDSS Indra emergency rainwater drainage set with angled parapet rainwater outlet, from polyurethane, thermally insulated, according to EN 1253 with increased quality standard according to RAL Quality Mark GZ-694, in the nominal size DN 70, flow rate 17.3 l/s at 45 mm head of water, with connecting pipe and safety clamps made of stainless steel, vapour barrier plate flex for safe connection to the vapour barrier and PUR insulating body. With large integrated selected connection sleeve (495 x 495 mm) suitable for roof waterproofing and with fixing ring for additional securing of the connection sleeve and for intake of the included retaining element with airstop and sealing ring. Complete as set with optional 2.0 m, 3.0 m or 4.0 m downpipe including pipe clamps. NEW! Setvariante DN/OD* Part No. Price 2.0 m downpipe (1 tube at 2000 mm) xx m downpipe (1 tube at 1000 mm + 1 tube at 2000 mm) 70/ xx m downpipe (2 tubes at 2000 mm) xx Important! Specify the connection sleeve in your order (xx) (see page 42).

21 SitaAttika outlets Conventional Emergency drainage SitaEasy The outlet for draining through the parapet SitaEasy Polyurethane, thermally insulated, with 90 -fixed flange and large integrated selected connection sleeve (500 x 500 mm), with fixing ring for fastening the connection sleeve and for taking in the dome grate. DN DN/OD* Part No. Price xx xx xx SitaEasy dome grate gravel catch made from polyamide, for fastening in the SitaEasy. DN Part No. Price NEW! NEW! SitaEasy Go made from polyurethan, thermally insulated, with foamed-in bitumen connection sleeve (500 x 500 mm) and angled fixed flange with 45 angle fillet for direct welding of bitumen roofing sheets, with fixing ring to secure the connection sleeve. SitaEasy Go dome grate gravel catch made from polyamide, for fastening in the SitaEasy Go. DN Part No. Price DN Part No. Price NEW! SitaEasy Plus Polyurethane, thermally insulated, with 90 -fixed flange and large integrated selected connection sleeve, with fixing ring for fastening the connection sleeve and for taking in the dome grate if necessary. Dome grate, see page 41 DN DN/OD* Part No. Price xx xx xx xx Important! Specify the connection sleeve in your order (xx) (see page 42). 21

22 SitaAttika outlets Conventional Emergency drainage SitaEasy The outlet for draining through the parapet SitaSteam vapour barrier plate with round pipe For SitaRondo, SitaSpy, SitaEasy and SitaEasy Plus, of EPDM, with adhesive flange for the flexible steamtight connection of the vapour barrier. SitaAttika cladding-cover plate Stainless steel, material number: , to cover the parapet or wall opening for the SitaAttika drainage DN 50 to DN 150 with a material thickness of 1.5 mm. ** DN/ID = Internal diameter (mm) DN Part No. Price DN DN/OD** Part No. Price E E E E E SitaAttika pipe system Made from stainless steel for leading the rainwater through the parapet. See pages SitaDrain Terra Drainage grate 300 x 300 mm, hot galvanized. Mesh size 9 mm x 64 mm, with engaged rubber feet on one side. Height adjustable from mm, as revision grate for the SitaEasy parapet outlets. Dimension (mm) Part No. Price 300 x Metal prices can be adjusted with regard to the market situation during the whole year.

23 Sita Pipe System SitaAttika Pipe System (stainless steel rustproof) SitaAttika pipe DN Stainless steel DIN EN /2. Plug-in pipe system with a seal made of EPDM mounted in the socket at the factory. Sharp end with a 20 phase to simplify assembly. Pipe and formed parts completely dip treated to ensure a smooth matt silver surface. Material no.: Pipe lenghts of mm to mm, not stocked Sita items, prices available upon request. Important: Possible increased shipment cost and delivery times for pipe lengths from 2,000 mm. The supplement for drainage through the parapet Size Pipe length Part No. Price DN/OD* (mm)** 50/ /50 1, / /75 1, /75 2, /75 3, upon request.00 70/75 5, / /110 1, /110 2, /110 3, upon request /110 5, / /125 1, / /160 1, SitaAttika bend** Stainless steel to DIN EN Plug-in pipe system with a seal made of EPDM mounted in the socket at the factory. Sharp end with a 20 phase to simplify assembly. Pipe and formed parts completely dip treated to ensure a smooth matt silver surface. Material no.: ** Further sizes are possible on request. DN/OD* Version Part No. Price 50/ / / /50 87, / / / /75 87, / / / /110 87, / / / /125 87, / / / /160 87, SitaAttika cleaning port** Stainless steel to DIN EN Plug-in pipe system with a seal made of EPDM mounted in the socket at the factory. Sharp end with a 20 phase to simplify assembly. Pipe and formed parts completely dip treated to ensure a smooth matt silver surface. Material-No.: for DN 70 and DN 100 Material No.: for DN 125 For pipe Part No. Price DN/OD* 70/ / / ** Further sizes are possible on request. 23

24 Sita Pipe System SitaAttika Pipe System (stainless steel) The supplement for drainage through the parapet SitaAttika safety clamp For SitaAttika stainless steel pipe in accordance with DIN EN /2. For the tension-free securing of Sita outlets with the SitaAttika pipe system. With a smooth matt silver surface. Material no.: Size Part No. Price DN/OD* 50/ / / / / SitaAttika pipe clamp** Stainless steel DIN EN /2 with insert. For fixing the pipe to the building, with a threaded connection M8 in DN 70 and threaded connection M10 DN 100 DN 160. Material no.: For pipe Part No. Price DN/OD* 70/ / / / ** Further sizes are possible on request. SitaAttika transition adapter from the downpipe to the SitaAttika. DN/OD* on zinc Part No. Price down pipe 70/75 NW 80 8-piece /110 NW piece /125 NW piece ** Further sizes are possible on request. D2 SitaAttika reduction piece Eccentric reduction piece to accommodate other dimensions. Material no.: for 110/75 Material no.: for 125/110 D1 D2 Part No. Price , ,00 D1 24 Metal prices can be adjusted with regard to the market situation during the whole year.

25 Sita retrofit outlets Possible combinations SitaSani 63/90 SitaSani 63/90 screw-on-flange SitaSani 95 SitaSani 110 SitaSani 125 SitaSani 165 SitaSani 165 screw-on-flange SitaMore terrace kit SitaCompact balcony outlet grating SitaTrendy extension unit SitaCompact extension unit * Application of SitaSani outlet dependent on internal diameter of renovating component 25

26 Sita retrofit outlets SitaSani The roof rainwater outlet for the refurbishment of existing components SitaSani 63 Polyurethane, thermally insulated, according to GET and DIN EN 1253 with integrated selected connection sleeve, with dome grate and sealing ring, length 550 mm. Backwater-safe at Component Part No. Price internal diameters* length From to (mm) (mm) xx Can be combined with the SitaTerrace kit (see page 19). SitaSani 63 screw-on-flange Polyurethane, thermally insulated, to GET and DIN EN 1253, with screw-on-flange and sealing sleeve for clamping the bitumen, plastic or EPDM roofing membrane, with dome grate, sealing ring and pipe DNM 90, length: 550 mm. Backwater-safe at Component Part No. Price internal diameters* length From to (mm) (mm) SitaSani 90 Polyurethane, thermally insulated, according to GET and DIN EN 1253, with integrated selected connection sleeve, with dome grate and sealing ring and pipe DN 90, length: 550 mm. Backwater-safe at Component Part No. Price internal diameters* length From to (mm) (mm) xx Can be combined with the SitaTerrace kit (see page 19). SitaSani 90 screw-on-flange Polyurethane, thermally insulated, to GET and DIN EN 1253, with screw-on-flange and sealing sleeve for clamping the bitumen, plastic or EPDM roofing membrane, with dome grate, sealing ring and pipe DNM 90, length: 550 mm. Backwater-safe at Component Part No. Price internal diameters* length From to (mm) (mm) SitaSani 95 Polyurethane, thermally insulated, according to GET and DIN EN 1253, with integrated selected connection sleeve, with dome grate and sealing rings. SitaSani 110 Polyurethane, thermally insulated, according to GET and DIN EN 1253, with integrated selected connection sleeve, with dome grate and sealing ring and pipe DN 100, length: 775 mm. Backwater-safe at Component Part No. Price internal diameters* length From to (mm) (mm) xx xx Backwater-safe at Component Part No. Price internal diameters* length From to (mm) (mm) xx SitaSani 125 Polyurethane, thermally insulated, according to GET and DIN EN 1253, with integrated selected connection sleeve, with dome grate and sealing rings. Backwater-safe at Component Part No. Price internal diameters* length From to (mm) (mm) xx xx Important! Specify the connection sleeve in your order (xx) (see page 42).

27 Sita retrofit outlets SitaSani The roof rainwater outlet for the refurbishment of existing components SitaSani 165 Polyurethane, thermally insulated, according to GET and DIN EN 1253, with integrated selected connection sleeve, with dome grate and sealing rings. Can be combined with the Sita terrace kit (see page 19). Backwater safe at Component- Part No. Price internal diameters* length From to (mm) (mm) xx xx SitaSani 165 screw-on-flange Polyurethane, thermally insulated, according to GET and DIN EN 1253, with Loose Fixed Flange design, with dome grate and sealing rings. Backwater safe at Component- Part No. Price internal diameters* length From to (mm) (mm) *Can be used depending on the requirement for pot or pipe refurbishment. Essential to consider is the inner diameter of the existing component to be refurbished, either pot or tube. SitaSani retrofit outlet Backwater-safe at internal diameters* From to (mm) Lip sealing ring Profiled sealing ring Component length (mm) Part No (reduced) (not reduced) xx xx xx xx xx xx xx xx 165 *Topf- oder Rohr-Innendurchmesser xx

28 Sita retrofit outlets SitaSani 160 DSS SitaSani 160 DSS With selected connecting sleeve and Airstop with dome grate. For old siphonic outlets with a pot diameter of 160 mm. Existing seals must be checked for function before being reused. Combine with SitaProfi extension unit and retaining element. The retrofit outlet for old DSS outlets Component- Part No. Price length (mm) xx xx SitaSani 160 DSS screw-on-flange Component- Part No. Price With loose/fixed flange construction and Airstop with dome grating. For old siphonic outlets with a pot diameter of 160 mm. Existing seals must be checked for function before being reused. length (mm) Combine with SitaProfi extension unit and retaining element. Sealing ring for SitaSani 160 DSS Fit for parapet outlet must be checked on site. Part No. Price E Important! Specify the connection sleeve in your order (xx) (see page 42).

29 Sita balcony and garage rainwater outlets Possible combinations SitaCompact SitaCompact screw-on-flange, vertical SitaCompact SitaCompact screw-on-flange, angled SitaMini vertical SitaMini angled SitaCarport SitaCompact extension unit SitaCompact screw-on-flange extension unit SitaCompact Balcony outlet grating SitaCompact balcony outlet grating for line drainage, with grating inlet grille SitaMini balcony outlet grating with stainless steel top grating SitaMini Balcony outlet grating for line drainage SitaCompact insulating body SitaAttika cladding-cover plate SitaAttika pipe system 29

30 Sita balcony outlets SitaCompact SitaCompact screw-on-flange SitaCompact, vertical Polyurethane, thermally insulated, to GET and DIN EN 1253, with integrated selected connection sleeve, with dome grate. The outlet for balconies and terraces DN DN/OD* Part No. Price xx xx SitaCompact, angled Polyurethane, thermally insulated, to GET and DIN EN 1253, with integrated selected connection sleeve, with dome grate. DN DN/OD* Part No. Price xx xx SitaCompact extension unit Polyurethane, thermally insulated, to GET and DIN EN 1253, with sealing ring for insulation material thicknesses of mm. With integrated selected connection sleeve xx SitaCompact screw-on-flange, vertical Polyurethane, thermally insulated, according to GET and DIN EN 1253, with screw-on-flange for clamping the bitumen, plastic or EPDM roofing membrane, with sealing sleeve and dome grate. DN DN/OD* Part No. Price SitaCompact screw-on-flange, angled Polyurethane, thermally insulated, to GET and DIN EN 1253, with screw-on-flange for clamping the bitumen, plastic or EPDM roofing membrane, with sealing sleeve and dome grate. DN DN/OD* Part No. Price SitaCompact screw-on-flange, extension unit Polyurethane, thermally insulated, to GET and DIN EN 1253, with sealing ring and sealing sleeves for insulation material thicknesses of mm. With screw-on-flange for clamping bitumen, plastic or EPDM roofing membranes SitaCompact retaining element for emergency drainage Polyurethane, for SitaCompact balcony outlet and extension unit. Retaining up to 220 mm SitaCompact Balcony outlet grating With inlet filter grille made of polyamide and stainless steel dome grate to drain rainwater on two levels. Can be shortened by sawing off excess SitaCompact Balcony outlet grating With inlet filter grille, made of polyamide and aluminium dome grate for line drainage with take in of pipes DN Can be shortened by sawing off excess Important! Specify the connection sleeve in your order (xx) (see page 42).

31 Sita balcony outlets SitaCompact SitaCompact screw-on-flange SitaMore height adjustment unit For balcony outlet grating, of polyamide, to accommodate thick surfaces. Can be shortened by sawing off excess. Stackable. The outlet for balconies and terraces 95 E SitaCompact insulating body For SitaCompact and Compact screw-on-flange made of extruded polystyrene foam (XPS) WLG 037, BSK B1**, to act as thermal insulation and installation aid for the SitaCompact and Compact screw-on-flange roof outlet. Series Part No. Price SitaCompact / Sita Compact E Screw-on-flange ** Fire protection class to DIN SitaSteam vapour barrier plate with round pipe For SitaRondo, SitaSpy, SitaEasy and SitaEasy Plus, of EPDM, with adhesive flange for the flexible steamtight connection of the vapour barrier. DN Part No. Price SitaAttika cladding-cover plate Stainless steel, material number: , to cover the parapet or wall opening for the SitaAttika drainage DN 50 to DN 150 with a material thickness of 1.5 mm. DN DN/OD** Part No. Price E E ** DN/ID = Internal diameter (mm) 31

32 Sita garage rainwater outlets SitaMini The outlet for garages SitaMini, vertical Polyurethane, thermally insulated, with integrated selected connection sleeve, with round grate. DN DN/OD* Part No. Price xx SitaMini, angled Polyurethane, thermally insulated, with integrated selected connection sleeve, with round grate. DN DN/OD* Part No. Price xx xx SitaMini balcony outlet grating Polyamide, with stainless steel grate. In connection with round grate height adjustable from mm. Can be shortened by sawing off excess SitaMini balcony outlet grating For line drainage, made of polyamide, with aluminium grate, for DN 50 and DN 70 fall pipes, height-adjustable from mm. Can be shortened by sawing off excess SitaMore height adjustment unit For balcony outlet grating, of polyamide, to accommodate thick surfaces. Can be shortened by sawing off excess. Stackable. 95 E SitaCarport The rainwater outlet for carports SitaCarport Rainwater outlet made from poloyurethane, with foamed-in selected connection sleeve, dome grate and facing cover for connetion to a downpipe DN 100. Facing cover Part No. Price Copper xx Zinc xx NEW! 32 Important! Specify the connection sleeve in your order (xx) (see page 42).

33 Sita green roof drainage SitaGreen For green roof surfaces SitaGreen green roof shaft Polyurethane, 400 x 400 mm, with hot galvanised mesh in size of 9 mm x 32 mm and four height-adjustable rubber feet. Height: mm guaranteed rust free. Load class L SitaGreen extension unit Polyurethane, 400 x 400 mm, with four height-adjustable brass bolts. Height: mm, stackable. Load class L SitaGreen for intensive greenery Polyurethane, 400 x 400 mm, with hot galvanised mesh in size of 9 mm x 32 mm and aluminium perforated plate frame. Can be cut down to 230 mm on site. Load class L Also available in other design heights. Special heights must be quoted in the order. SitaGreen extension unit Polyurethane, for retaining the rain on the roof. for series SitaStandard SitaTrendy SitaTrendy screw-on-flange SitaCompact SitaCompact screw-on-flange

34 SitaVent roof ventilators Possible combinations SitaVent system vent SitaVent retrofit vent SitaVent pipe fairlead SitaVent cold roof vent DN 70- DN 100 DN 125- DN 150 DN 63- DN 110 DN 125- DN 160 SitaVent base plate DN 100 DN 150 SitaVent rain hood DN 100 DN 150 SitaVent socket pipe DN 100 DN 150 SitaVent protective grating SitaVent pipe bend 34

35 SitaVent roof ventilators SitaVent system vent Pipe fairlead SitaVent system vents Polyurethane, thermally insulated, with integrated selected connection sleeve, connecting pipe, rejector and sealing ring. SitaVent refurbishment vent Polyurethane, thermally insulated, with integrated selected connection sleeve, connecting pipe 1000 mm long, rejector and sealing rings. SitaVent pipe system with pipe fairlead Polyurethane, thermally insulated, with integrated selected connection sleeve, connecting pipe bend 180, rejector and sealing rings. The all-round system for room, section and cold roof ventilation DN Connecting pipe Part No. Price (mm) xx xx xx xx xx xx xx DN/ OD* Backwater safe Part No. Price From-to (mm) xx xx xx xx xx xx DN Connecting pipe Part No. Price (mm) xx xx xx SitaVent pipe system for cold roofs Polyurethane, thermally insulated, with integrated selected connection sleeve, with rejector, sealing ring and rain cover. Height 400 mm. DN Part No. Price xx xx SitaVent pipe system base plate Polyurethane, thermally insulated, with integrated selected connection sleeve and connection of the steam barrier, with sealing ring. Necessary minimum insulation material thickness: 80 mm. SitaVent pipe system rain cover Polyamide, with fastening ring, for protection from driving rain. SitaVent pipe system protective grating Polyamide, with fastening ring, for the protection from penetration from foreign elements. SitaVent socket pipe To extend the SitaVent system vent, SitaVent cold roof vent and SitaVent pipe fairlead by up to 860 mm. SitaVent pipe bend 180 With welded sockets, made of polyethylene. Included in the SitaVent pipe fairlead package. DN for DN Part No. Price xx xx DN Part No. Price DN Part No. Price Size Part No. Price DN DN/OD* E E DN Part No. Price 100 E E Important! Specify the connection sleeve in your order (xx) (see page 42). 35

36 Sita drainage grate SitaDrain box drain (galvanised) SitaDrain box drain With footbridge, made of galvanised steel. Load rating class K3. Wheelchair accessible. Dimensions (mm) Drain height (mm) Part No. Price 150 x x x SitaDrain box drain With mesh cover, drain: galvanised steel, grate: hot galvanised steel, mesh size 9 x 64 mm. Load rating class K3. Wheelchair accessible. Dimensions (mm) Drain height (mm) Part No. Price 150 x x x SitaDrain box drain head enddrain height (mm) Part No. Price For clamping into the box drain, galvanized steel. 30 E E E SitaDrain box drain fastening Anti theft device for the footbridge and mesh cover, made of stainless steel, material number Consisting of 2 fastenings measuring 121 x 20 mm and 2 countersunk slot screws to secure the footbridge and mesh to the box drain. Mesh design Part No. Price Footbridge Mesh SitaDrain Height adjustment set With the height adjustment set the box drain can be adjusted progressively to any height. Height (mm)* Part No. Price Set Set Set *Depending on the height of the boxed gutter, see table Height adjustment from to (mm) Height (mm) Sita box drain Height adjustment set 1 Height adjustment set 2 Height adjustment set 3 of box drain Part No. Part No Part No Part No (footbridge) (mesh) (footbridge) (mesh) (footbridge) (mesh) mm mm mm mm mm mm mm mm mm 36 Metal prices can be adjusted with regard to the market situation during the whole year.

37 Sita drainage grate SitaDrain box drain (stainless steel) SitaDrain box drain With footbridge, made of high-grade stainless steel. Material No Guaranteed stainless. Load rating class K3. Wheelchair accessible. Dimensions (mm) Drain height (mm) Part No. Price 150 x x x SitaDrain box drain With mesh cover, made of high-grade stainless steel. Material No Guaranteed stainless. Steel mesh with mesh size 9 x 64 mm. Load rating class K3. Wheelchair accessible. Dimensions (mm) Drain height (mm) Part No. Price 150 x x x SitaDrain box drain head end For fixing into the box gutter. Material No Guaranteed stainless. Drain height (mm) Part No. Price 30 E E E SitaDrain box drain fastening Anti theft device for the footbridge and mesh cover, made of stainless steel, material number Consisting of 2 fastenings measuring 121 x 20 mm and 2 panhead slot screws to secure the footbridge and mesh to the box drain. Mesh design Part No. Price Footbridge Mesh SitaDrain Height adjustment set With the height adjustment set, consisting of 6 feet, the drain can be steplessly adjusted in height. Height (mm)* Part No. Price Set Set Set *Depending on the height of the boxed gutter, see table Height adjustment from to (mm) Height (mm) Sita box drain Height adjustment set 1 Height adjustment set 2 Height adjustment set 3 of box drain Part No. Part No Part No Part No (footbridge) (mesh) (footbridge) (mesh) (footbridge) (mesh) mm mm mm mm mm mm mm mm mm Metal prices can be adjusted with regard to the market situation during the whole year. 37

38 Sita drainage grate SitaDrain Klassik (hot galvanised) The perfect solution for problem drainage areas SitaDrain Klassik Hot galvanised steel, mesh cover with mesh size 9 mm x 64 mm. With two infinitely height-adjustable rubber feet. Height: mm Special dimensions available to order. SitaDrain Klassik Hot galvanised steel, mesh cover with mesh size 9 mm x 64 mm. With four infinitely height-adjustable rubber feet. Height: mm Special dimensions available to order. SitaDrain Klassik Hot galvanised steel, mesh cover with mesh size 9 mm x 64 mm. With four infinitely height-adjustable rubber feet. Height: mm. Load rating class K3. Wheelchair accessible. Dimensions (mm) Part No. Price 100 x x x Dimensions (mm) Part No. Price 150 x x x Dimensions (mm) Part No. Price 250 x x Special dimensions available to order. SitaDrain Klassik Hot galvanised steel, mesh cover with mesh size 9 mm x 64 mm. With four infinitely height-adjustable rubber feet. Height: mm Dimensions (mm) Part No. Price 500 x Special dimensions available to order. SitaDrain Klassik (Stainless steel) SitaDrain Klassik High-grade stainless steel. Material No Guaranteed stainless. Mesh size 9 mm x 64 mm. With 2 infinitely heightadjustable rubber feet. Height mm. SitaDrain Klassik High-grade stainless steel. Material No Guaranteed stainless. Mesh size 9 mm x 64 mm. With 4 infinitely heightadjustable rubber feet. Height mm. SitaDrain Klassik High-grade stainless steel. Material No Guaranteed stainless. Mesh size 9 mm x 64 mm. With 4 infinitely heightadjustable rubber feet. Height mm. Load rating class K3. Wheelchair accessible. The perfect solution for problem drainage areas Material Dimensions (mm) Part No. Price Pickled 100 x stainless steel Material Dimensions (mm) Part No. Price Pickled stainless steel Polished 150 x stainless steel Material Dimensions (mm) Part No. Price Pickled stainless steel 250 x 1000 Polished stainless steel 38 Metal prices can be adjusted with regard to the market situation during the whole year.

39 Sita drainage grate SitaDrain Endlos (hot galvanised) The perfect solution for problem drainage areas SitaDrain Endlos initial piece Hot galvanised steel, complete with four height-adjustable rubber feet from mm, steel mesh cover with mesh size 9 mm x 64 mm. Special dimensions available to order. SitaDrain Endlos adapter Hot galvanised steel, complete with two height-adjustable rubber feet from mm, steel mesh cover with mesh size 9 mm x 64 mm. Special dimensions available to order. SitaDrain Endlos ending piece Hot galvanised steel, complete with two height-adjustable rubber feet from mm, steel mesh cover with mesh size 9 mm x 64 mm. Special dimensions available to order. Dimensions (mm) 150 x 1000 Part No Price Dimensions (mm) 150 x 1000 Part No Price Dimensions (mm) 150 x 1000 Part No Price Part No * Price Dimensions larger than mm are manufactured in two parts; the shortest available length is 200 mm. SitaDrain Terra SitaDrain Terra For terraces and green roofs. With four infinitely height-adjustable rubber feet, height 70 mm to 110 mm Mesh cover with mesh size 9 mm x 64 mm. Material Dimensions (mm) Hot galvanised 300 x 300 Hot galvanised 400 x 400 Pickled stainless steel 400 x 400 Hot galvanised 500 x 500 * With rubber feet, recessed on the one side, specially for the Attika (parapet) drainage. SitaDrain accessories SitaDrain Gravel strip Simply edged gravel strip of aluminium. Leant against the elementary framework the gravel strip holds back stone chippings or fine gravel mm long. SitaDrain Junction channel Galvanized, 30 mm high, 70 mm wide, 1000 mm long. Height Leg length /90 110/ /165 (mm) Length 1000 mm SitaDrain Feet Rubber foot for SitaDrain Klassik, Endlos and Terra with 85 mm grub screw, hot galvanised with 120 mm grub screw, hot galvanised with 120 mm grub screw, stainless steel (mm) Part No. Price E Material Galvanised Part No. E Price For height up to mm mm mm Part No. E E E Price Metal prices can be adjusted with regard to the market situation during the whole year. 39

40 Sita fire protection SitaFiresafe For preventive fire safety to DIN SitaFiresafe for Sita roof outlets For preventive fire safety and to prevent the spread of fire from below with small penetrations according to DIN part 3 and 4, consisting of: Roof outlet according to DIN EN 1253 for the conventional or siphonic, with adhesive flange for connection to the vapour barrier and dome grate Reinforcement sheet according to DIN Fire protection box of galvanised steel Fire protection sleeve Connecting pipe Extension units in required length are available separately for each side. The fire safety unit is fully assembled, including dome grate and/or Airstop. Lead time approx. 8 working days ex-works. Thermal SitaFiresafe are fitted with a SitaMore pipe sleeve heating system for the fire safety box. Size Part No. Price With SitaStandard DN 70 F DN 100 F DN 125 F DN 150 F Heated versions DN 70 F DN 100 F DN 125 F DN 150 F With SitaTrendy DN 70 F DN 100 F DN 125 F Heated versions DN 70 F DN 100 F DN 125 F With SitaDSS Profi DN 56 F DN 70 F Heated versions DN 56 F DN 70 F * Without Airstop to be used in combination with the SitaDSS Profi retaining unit for SitaDSS Profi and SitaDSS Profi screw-on-flange only. With SitaDSS Profi for emergency drainage* DN 56 F DN 70 F Heated versions DN 56 F DN 70 F SitaFiresafe with SitaVent pipe system For preventive fire safety and to prevent the spread of fire from below with small penetrations according to DIN part 3 and 4, consisting of: Size Part No. Price DN 100 F DN 150 F SitaVent system vent, base plate with adhesive flange for connecting the vapour barrier and sealing ring Reinforcement sheet according to DIN Fire protection box of galvanized steel Fire protection sleeve Connecting pipe The fire protection unit is completely pre-mounted. Lead time approx. 8 working days ex-works. 40