Round duct grille Model KG-RR

Transcription

1 Round duct grille Model KG-RR Ferdinand Schad KG Steigstraße D Kolbingen Telephone +49 (0) Fax +49 (0) info@schako.de

2 Contents Description...3 Construction... 3 Model... 3 Air throw pattern... 3 Accessories... 3 Fastening... 3 Blade adjustment options... 4 Correction factor (for scattered air jet)... 4 Mounting position... 4 Dimensions... 5 Technical data...7 Pressure loss and noise level... 7 Maximum end velocity of jet Jet path Critical throw Maximum penetration Temperature and induction ratios Legend Order details Specification texts /04-2

3 Description In modern architecture, sheet metal and spiral ducts of air-conditioning systems are often incorporated in the design of the room. Emphasis is often placed deliberately on parts of the supply system. In this visible installation of the ventilation ducts, it is a good idea to integrate the air diffusers into the ducts. The round duct compact grille type KG-RR is suitable for installation in supply or return air systems. The air volume throughput can be regulated by using an integrated hit-and-miss damper. The integrated hit-and-miss damper ensures a uniform distribution of supply air along the whole length of the grille. The round duct grille can be installed at any point of the duct system. The front side horizontal and vertical blades can be adjusted. A divergent air throw pattern can be set. This widens the air jet, supplying a larger area of the occupied zone with fresh air. During the installation, the round duct grille must be mounted in accordance with the desired air direction. The blades and the hit-and-miss damper are positioned on the round duct at 3 o'clock (-3U), 6 o'clock (-6U, standard), 9 o'clock (-9U) or 12 o'clock (0U). Accessories, such as dummy pipes, end covers and connecting sleeves complete the range for this diffuser. (See documents: Accessories for round duct systems). Layout The round duct grille KG-RR is selected according the diagrams of the grille type KG. Construction Round duct and blades - Galvanised sheet steel (-SV). - Galvanised sheet steel, painted to RAL 9010 (white (-SV, 9010) - painted to RAL colour of your choice (at an extra charge). - Stainless steel painted in the colour sand silver (- V2) hit-and-miss damper - made of the same material as the round duct - Galvanised sheet steel - Stainless steel (V2A) Model KG-RR horizontal air deflection blades KG-RR vertical air deflection blades KG-RR-...-3U horizontal throw right (3 o'clock) KG-RR-...-6U vertical throw downward (6 o'clock) (standard) KG-RR-...-9U horizontal throw left (9 o'clock) KG-RR-...-0U vertical throw upward (12 o'clock) Air throw pattern KG-RR-...-L Blade position: straight KG-RR-...-L00R Blade position: horizontal right KG-RR-...-L00L Blade position: horizontal left KG-RR-...-L Blade position 44 diverging KG-RR-...-L Blade position 84 diverging KG-RR-...-LGEG Blade position opposite to one another Accessories Rubber lip seal (-GD) - on both sides, made of EPDM Accessories - Separate brochure on request Fastening Suspension - prepared for suspended installation by using an M8 threaded rod to be provided by the customer. Attention! We would like to point out that for cleaning stainless steel models, only suitable cleaning materials may be used! Please note that for vertical throw a distance of at least 100 mm must be available between the weld seam and the diffuser. This means that the weld seam must be offset accordingly. 01/04-3

4 Air throw pattern straight Blade adjustment options Throw directions (mounting position 6 o'clock) KG-RR-8 vertical air deflection blades one-way horizontal (only KG-RR ) KG-RR-08 right (-L00R) diverging left (-L00L) Correction factor (for scattered air jet) with or without coanda effect Blade position End velocity of jet v max (m/s) 0.65 v max (m/s) 0.5 TV = ΔT x / ΔT Induction ratio i 1.3 i 2 Jet drop - Jet rise y 1.3 y 2 Grille distance z (m)> x 0.20 x 0.25 Mounting position 6 o'clock (-6U, standard) against each other (-LGEG, only KG-RR ) KG-RR-15 3 o'clock (-3U) straight (-L000) KG-RR-08 KG-RR-15 9 o'clock (-9U) diverging 44 (-L044, scattered air jet) KG-RR-08 KG-RR-15 diverging 84 (-L084, scattered air jet) KG-RR-08 KG-RR o'clock (-0U) The angle of propagation of the air jet and thus the length of throw can be affected by adjusting the vertical air deflection blades. 01/04-4

5 Dimensions KG-RR-08-6U KG-RR-15-6U Banding from NW 500 Air flow direction outside hit-and-miss damper Available sizes NW ød Height H x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x All combined lengths and nominal widths available! x = available - = not available Banding from NW 500 Air flow direction outside hit-and-miss damper Length L Number of slots lengthwise part 2-part Detail Y Threaded rod on site Riveting nut M8 Accessories Detail X Rubber lip seal (-GD) Only applies to suspended installation from the ceiling: prepared for suspended installation from the ceiling by using an M8 threaded rod to be provided by the customer. 01/04-5

6 Division of length 1-part: Length 500 Round duct diffusers with a length of > 1000 mm are produced in two parts and joined in-factory with a connecting sleeve. Riveting nuts are not required at this joint side. The dimensions of the dummy pipe fit the dimensions of the round duct grille type KG-RR. A different length of sections is possible on request. However, the maximum length for a middle or end piece is 1000 mm. Length 750 Length part: Length 1500 Length 1750 Length /04-6

7 Technical data Pressure loss and noise level Supply air face velocity Supply air Hit-and-miss damper position OPEN in % 01/04-7

8 Return air face velocity Return air Hit-and-miss damper position OPEN in % 01/04-8

9 FQ in m² at the hit-and-miss damper L 1-part 2-part NW H / ,0090 0,0135 0,0180 0,0270 0,0315 0, ,0180 0,0270 0,0360 0,0540 0,0630 0, ,0090 0,0135 0,0180 0,0270 0,0315 0, / 280 / ,0180 0,0270 0,0360 0,0540 0,0630 0, ,0360 0,0540 0,0720 0,1440 0,1800 0, / 400 / ,0090 0,0135 0,0180 0,0270 0,0315 0, / 560 / ,0180 0,0270 0,0360 0,0540 0,0630 0, ,0360 0,0540 0,0720 0,1080 0,1260 0, / 800 / ,0540 0,0810 0,1080 0,1620 0,1890 0,2160 Face area (m²) L 1-part 2-part NW H / ,0240 0,0350 0,0470 0,0710 0,0820 0, ,0440 0,0660 0,0870 0,1310 0,1530 0, ,0240 0,0350 0,0470 0,0710 0,0820 0, / 280 / ,0440 0,0660 0,0870 0,1310 0,1530 0, ,0850 0,1260 0,1680 0,2530 0,2940 0, / 400 / ,0240 0,0350 0,0470 0,0710 0,0820 0, / 560 / ,0440 0,0660 0,0870 0,1310 0,1530 0, ,0850 0,1260 0,1680 0,2530 0,2940 0, / 800 / ,1260 0,1870 0,2480 0,3740 0,4350 0, /04-9

10 Maximum end velocity of jet Supply air without coanda effect Supply air with coanda effect 01/04-10

11 Jet path Supply air without coanda effect Heating Cooling Critical throw Supply air with coanda effect 01/04-11

12 Maximum penetration Max. vertical penetration (in heating mode): 01/04-12

13 Temperature and induction ratios Supply air without coanda effect Supply air with coanda effect 01/04-13

14 Legend V ZU (m³/h) [l/s] = Supply air volume V x (m³/h) [l/s] = total air jet volume at point x V AB (m³/h) [l/s] = Return air volume v max (m/s) = Maximum end velocity of jet v K (m/s) = Duct velocity v stirn (m/s) = Intake velocity, blower stream velocity, outflow velocity, relative to A stirn A stirn (m²) = Face area x (m) = horizontal throw x kr (m) = Critical throw y (m) = Vertical throw y H (m) = Maximum penetration in heating mode x kr (m) = Critical throw ρ (kg/m³) = Density Δp t (Pa) = Pressure loss L WA [db(a)] = A-weighted sound power level [L WA = L WA1 + KF] ΔT OH (K) = Temperature difference between air supply and room temperature in heating mode (ΔT OH = t ZUH - t RH ) t zu ( C) = Supply air temperature t R ( C) = Room temperature i (-) = Induction ratio (i = V X / V ZU ) TV (-) = Temperature ratio (TV = ΔT X / ΔT O ) ΔT X (K) = Temperature difference at point x (ΔT X = ΔT O x TV) ΔT O (K) = Temperature difference between supply air temperature and room temperature (ΔT O = t ZU - t R ) RH (mm) = Room height H (mm) = Height L (mm) = Length FQ (m 2 ) = Free cross-section in m² 01/04-14

15 Order details Round duct grille Model KG-RR with horizontal Air deflection blades - 08 with vertical Air deflection blades -15 NW Length 1-part Length 2-part Height Blade adjustment options (outflow directions) horizontal one-sided (only KG-RR-08) opposite to one another (only KG-RR-15) -LGEG vertical straight -L L044 diverging 84 -L084 left -L00L right -L00R Round duct made of Galvanised sheet steel painted to RAL 9010 (white, standard) -SV 9010 Round duct made of Sheet steel galvanised -SV Round duct made of Stainless steel V2 Mounting position 3 o'clock -3U 6 o'clock -6U 9 o'clock -9U 12 o'clock -0U Accessories Rubber lip seal -GD Order example: KG-RR L000-SV U-EM Unless stated otherwise, the thick-frame model will be delivered. 01/04-15

16 Specification texts Round duct compact grille type KG-RR for supply and return air for connection to DIN ducts. With integrated, manually adjustable hit-and-miss damper made of galvanised sheet steel or stainless steel V2A (produced of the same material as the round pipe) for air volume regulation. - With horizontal front side adjustable air deflection blades. Product: SCHAKO type KG-RR-08 - With vertical front side adjustable air deflection blades. Product: SCHAKO type KG-RR-15 - Length - 1-part: 500 / 750 / 1000 (-0500/-0750/-1000) - 2-part: 1500 / 1750 / 2000 (-1500/-1750/-2000) - Height - 65 (-065) (-115) (-215) (-315) - Blade adjustment options (throw directions) - one-way horizontal throw to the left (-L00L, only KG-RR- 08) - one-way horizontal throw to the right (-L00R) - against each other (-LGEG, only KG-RR-15) - straight (-L000, standard) - diverging - 44 (-L044) - 84 (-L048) - Round duct and blades made of - Galvanised sheet steel, painted to RAL 9010 (white) (-SV, 9010) - Galvanised sheet steel (-SV) (at an extra charge) - Stainless steel painted in the colour sand silver (- V2) - Mounting position - 3 o'clock (-3U) - 6 o'clock (-6U, standard) - 9 o'clock (-9U) - 12 o'clock (-0U) Accessories (at an extra charge): - Rubber lip seal (-GD) - on both sides, made of EPDM 01/04-16