Particle Filter Box Model FKF

Size: px
Start display at page:

Download "Particle Filter Box Model FKF"

Transcription

1 Particle Filter Box Model FKF Ferdinand Schad KG Steigstraße D Kolbingen Telephone +49 (0) Fax +49 (0) info@schako.de

2 Contents Description...3 Construction... 3 Model... 3 Accessories... 4 Fastening... 4 Models and dimensions...5 Dimensions... 5 Dimensions of accessories... 8 Installation Filter Installation Instructions Air diffusers with concealed mounting (-VM) Technical data Pressure loss Connection diagram Technical data of motors Legend Order code FKF Order code FDQJ Order code FPIL Order code FDAV Order code FIL for FKF Specification texts /06-2

3 Description The particle filter box type FKF with fluid seal at the filter cell has been developed especially for use in cleanrooms required by the pharmaceutical, electronic, precision mechanical and optical industries in hospitals and laboratories. The integrated particle filter (to DIN EN 1822) removes particles, radioactive dust, mist, bacteria, viruses, etc., from the supply or return air. This ensures that the incoming and outgoing air flows are extremely clean and germ-free. The fluid is located at the filter cell and pressed into a sealing device especially developed for this purpose in the filter box when the filter cell is installed. Owing to the properties of the fluid, the filter cell can be mounted and dismounted several times without having to change the fluid. The filter box type FKF-... consists of electrolytically galvanised sheet steel painted to RAL 9010 (white) with a round connection spigot for hose connection while the type FKF-Q-... has a rectangular pipe with connection flange. A filter pressure device in the filter box ensures a safe seal. As a standard feature, a differential pressure and aerosol monitoring device is integrated into the particle filter box. Optionally, the particle filter boxes FKF-H-... are additionally equipped with a shut-off damper sealing air-tight. This shut-off damper can be adjusted manually from below after the air diffuser is removed. The type FKF is actuated by an electric actuator OPEN/CLOSED 24 V or by a spring return actuator. Leakage at closed shut-off damper according to DIN EN 1751, class 4, at a duct pressure of up to 1000 Pa. Attention! We would like to point out that we supply the filter boxes with integrated spacers for fitting the filter clamps and the diffuser assembly pole brace. This makes it possible to fit the air diffuser without additional expense, even when the filter has not yet been inserted into the filter box. The assembly of the air diffusers is effected via magnetic fastening. This allows the air diffusers to be easily taken off for filter replacement and decontamination without requiring tools. The following ceiling air diffusers in supply and return air models are suitable to be fitted to the particle filter box type FKF: FDQJ, FPIL, FDAV. Magnetic fastening is generally not possible for FPIL and FDAV and for air diffusers made of aluminium and stainless steel. These air diffusers are mounted via central fastening (-VM). If required, the suitable particle filters can be included in the delivery. Construction Shut-off damper - Galvanised sheet steel (standard) - stainless steel Differential pressure device/aerosol monitoring device (-D1) - with measuring pipe in box, for hose connection with inner diameter of 10 mm. Filter box - Electrolytically galvanised sheet steel inside and outside painted to RAL 9010 (white) (-SB-9010) - Stainless steel (-V2-SAND) (at an extra charge) painted in the colour sand silver Air and swirl diffusers - Aluminium natural colour anodised E6/EV1 (magnetic fastening not possible) - Sheet steel painted inside and outside to RAL 9010 (white) - Stainless steel (V2A) painted in the colour sand silver (magnetic fastening not possible) Model FKF-H with horizontal, round connection spigot FKF-H-...-M with horizontal, round connection spigot and manually adjustable shut-off damper. Leakage at closed shut-off damper according to DIN EN 1751, class 4, at a duct pressure of up to 1000 Pa. FKF-H-...-Exxx with horizontal, round connection spigot and electrically (OPEN/CLOSED actuator) adjustable shut-off damper (with/ without spring return). Leakage at closed shut-off damper according to DIN EN 1751, class 4, at a duct pressure of up to 1000 Pa. FKF-V with vertical, round connection spigot FKF-V-...-M with vertical, round connection spigot and manually adjustable shut-off damper. Leakage at closed damper blade according to DIN EN 1751, class 4, at a duct pressure of up to 1000 Pa. FKF-Q with horizontal, rectangular connection spigot, with connection flange The filter boxes in stainless steel design are additionally painted in the colour sand silver and are delivered together with the air diffuser FDQJ made of stainless steel. FPIL and FDAV are not available in connection with particle filter boxes made of stainless steel. 07/06-3

4 Accessories Differential pressure device / aerosol monitoring device additionally with 2 measuring spigots on the box outside for a hose with an inner diameter of 4 mm (-D2) Differential pressure device / aerosol monitoring device additionally with 2 measuring spigots on the box outside for a hose with an inner diameter of 4 mm and an aerosol feeding device in the spigot from the box inside (-D3) Differential pressure device / aerosol monitoring device additionally with an aerosol feeding device in the spigot from the box inside (-D4) Differential pressure device / aerosol monitoring device additionally with an aerosol feeding device in the spigot from the outside (-D5) Differential pressure transducer (-U1) (only possible for options -D2 and -D3, supplied loose or, as an option, mounted to the box outside) Rubber lip seal (-GD1) - Special rubber (not for FKF-Q-...) Mounting lever - for replacing the filter, made of sheet steel painted to RAL 9010 (white) Particle filter UXA - with fluid seal in filter housing, filter frame H=102 mm, made of aluminium with double-sided handle cover, filter class H13 (>99.95%) or H14 (>99.995%) oil thread test checked according to DIN EN 1822, temperature-resistant up to 80 C, filter wrapped in film - Scan test checked according to DIN EN 1822 (at an extra charge) Antibacterial coating (-AB1) Fastening Magnetic fastening (-MB) (standard, for FDQJ made of sheet steel, not possible for aluminium and stainless steel model) Concealed mounting (-VM) - Pole brace fastening (standard for air diffusers made of aluminium and stainless steel and FPIL and FDAV) 07/06-4

5 Models and dimensions Dimensions FKF-H-...-D1-... Fixing lug with long hole ø 10 x 20 outside View A outside Available sizes NW Filter dimensions A ød E E1 K R Standard Air diffusers for NW 650 consist of a 650x650 mm faceplate having a drill pattern of size 600. for FDAV/FPIL J FH H G a H G a Differential pressure device/ aerosol monitoring device (standard) section B-B FKF-H-...-M001-D1-... Fixing lug with long hole ø 10 x 20 Detail Z Fluid (in filter housing) 07/06-5

6 FKF-V-...-D1-... Available sizes H1 for FPIL/ FDAV Nominal width FDQJ for PIL-Q / PIL-G-Q FKF-H-...-Exxx-... Drawn rotated by 20 Actuator without spring return (E001, E002, E030, E031) Attention! With modified connection spigot, a motor cannot be fitted to the shut-off damper! Detail Z Fluid (in filter housing) Drawn rotated by 20 Actuator with spring return (E020, E021, E036, E037) FKF-V-...-M001-D1-... Attention! With modified connection spigot, a motor cannot be fitted to the shut-off damper! 07/06-6

7 FKF-Q-...-D1-... Detail Z Fluid (in filter housing) Detail Y Connection flange to fit Metu systems HM 20 and HM 30 Available sizes Nominal width B H2 Nominal width FDQJ for FPIL/ FDAV /06-7

8 Accessories - dimensions Differential pressure device / aerosol monitoring device additionally with 2 measuring spigots on the box outside for a hose with an inner diameter of 4 mm (-D2) Differential pressure device / aerosol monitoring device additionally with 2 measuring spigots on the box outside for a hose with an inner diameter of 4 mm and an aerosol feeding device in the spigot from the box inside (-D3) Available sizes Nominal width Standard Attention: Please note that the O-rings (seals) of the bulkhead stuffing box may dry out over the months. Once the O-rings have dried out, the hoses can only be inserted by applying higher force. A common method of reoiling these bulkhead stuffing boxes is to impregnate a cloth with a universal oil, for example from Ballistol, and wipe it across the hose, before inserting it. This small amount is sufficient to make the bulkhead stuffing boxes running smoothly again. Rubber lip seal (-GD1) Detail X a FPIL / FDAV Standard b FPIL / FDAV Not for model FKF-Q! Differential pressure device / aerosol monitoring device additionally with an aerosol feeding device in the spigot from the box inside (-D4) Differential pressure transducer (-U1, only possible for options (-D2) and (-D3)) - Output: 0-20 ma - 24 V AC/DC - 1 relay - supplied loose (optionally mounted to box outside) Differential pressure device / aerosol monitoring device additionally with an aerosol feeding device in the spigot from the outside (-D5) 07/06-8

9 Air diffusers: FDQJ-Q-SR-.../FDQJ-Q-SQ-... Sizes 400 / 500 / 600 / 625 / 650 / 800 Blade position 1 Blade position 2 Material: - Painted sheet steel for magnetic fastening - Aluminium/stainless steel for concealed mounting with pole brace Note: - Return air without blades FPIL-QV-.../ FPIL-QS-.../ FPIL-QK-... Sizes 400 / 500 / 600 / 625 / 650 Material: - Painted sheet steel for concealed mounting with pole brace - Aluminium for concealed mounting with pole brace (only available for PIL-QV-...) FDAV-Q-... Sizes 400 / 500 / 600 / 625 / 650 Material: - Painted sheet steel for concealed mounting with pole brace The air diffusers FDQJ, FPIL and FDAV are models especially designed for filter boxes FKF and FKU. Theses air diffusers can only be used in connection with the corresponding filter boxes. Their ventilation characteristics are identical to those of the standard air diffusers DQJ-..., PIL-... und DAV-... These air diffusers must be specified using the order code on page 16 et seq. 07/06-9

10 Installation Filter assembly instruction Air diffusers with concealed mounting (-VM) Attention! The particle filter cell may fall out of the filter housing when the filter clamps are removed! Before the particle filter unit can be inserted, the shipping brace clamped by means of the filter clamps must be removed! Shipping brace Detail Z Fluid (in filter housing) Air diffusers with magnetic fastening (-MB) Mounting lever for filter replacement Installation Loosen filter clamp (pos. 4) and remove it along with shipping brace. Press the particle filter unit (pos. 6) with the fluid seal (see detail Z) pointing upwards into the filter housing (pos. 7). Take care that the filter material is not irreparably damaged. The filter unit can be easily locked using two diagonal filter clamps (pos. 1 and 3). Next, the VM pole brace (pos. 5) is inserted and fastened using the other two filter clamps (pos. 2 and 4) Care must be taken that the filter clamps are at first tightened only slightly cross-wise (e.g. in the sequence filter clamps 1, 3, 2, 4). After tightening the filter clamps slightly, they can be tightened properly, again cross-wise and evenly until the filter unit has a tight fit. Care must be taken that the filter clamps are tightened to 2 Nm maximum. A buffer prevents the immersing sword from severing the fluid. Dismounting Unscrew the air diffuser (in case of magnetic fastening (-MB), insert your hands into the air diffusor slots and remove the unit). Loosen the filter clamps and take off the VM pole brace. The particle filter cell can easily be taken off downwards with an assembly lever. The assembly lever is led sideways from the filter upwards and then hooked on the filter top edge. Gently pulling on the assembly lever removes the filter from the box. Maintenance In addition to keeping machines and equipment clean, the maintenance of the filters is especially important. A constant control of the filters is as essential as changing them when the maximum allowed particle absorption has been reached. The inspection must take place at short enough intervals to allow faults that have occurred or become apparent to be eliminated in time. The necessary intervals are set depending on the local conditions. The measured variable for the particle intake of the filter is the pressure difference. Because of this a differential pressure measure device is attached at every filter step to monitor the operating condition. The filter is changed upon reaching the final resistance, which is set in advance when designing the ventilator capacity of the ventilation system. The final resistance is normally twice the starting resistance. Installation situation below ceiling (standard) above ceiling Attention: For mounting above ceiling, it is essential to specify the ceiling thickness "s"! 07/06-10

11 Technical data Pressure loss NW FIL-FKF-...-H Width x Height x Depth [mm] V nenn / pressure difference [m³/h / Pa] FIL-FKF-...- H FIL-FKF-...- H x357x / / x457x / / x557x / / x575x / / x610x / / x754x / / 90 FIL-FKF-...-H An H13 filter unit cannot be used as H14 filter! If the particle filters are designed according to filter class H14, make sure that the air volume at the faceplates is checked. Thus, it may happen that the air volume is too low for the selected faceplate, resulting in an uncontrolled jet drop. In this case, we recommend using a faceplate with a smaller perforation, for example a 600 faceplate with a 500 perforation. Filter class according to DIN EN Allowed final pressure: max 500 Pa - Filtration efficiency in MPPS: H13 = > % H14 = > % 07/06-11

12 Circuit diagram Connection diagram LM24A (-E001) / LM24A-S (-E030) OPEN/CLOSED control 3-point control AC DC AC DC Attention! - Connection via safety transformer. - Parallel connection of further drives is possible. Observe specifications. Connection diagram LM230A (-E002) / LM230A-S (-E031) OPEN/CLOSED control 3-point control AC AC Attention! - Mains voltage connected! - Parallel connection of further drives is possible. Observe specifications. Connection diagram LF24 (-E021) / LF24-S (-E037), LF230 (-E020) / LF230-S (-E036) AC DC AC Attention! - Connection via safety transformer. - Parallel connection of further drives is possible. Observe specifications. 07/06-12

13 Technical data of motors LM24A (-E001) / LM24A-S (-E030) (make Belimo) rated voltage: 24 V AC/DC, 50/60 Hz Functional range : V AC/DV Power consumption : - Operation: 1 W - Idle position: 0.2 W Dimensioning : 2 VA Torque : Min. 5 Nm Running time : 150 s Sound power level: 35 db (A) Protection class : III Safety extra low voltage Degree of protection : IP54 in all mounting positions EMC: CE according to 89 / 336 / EEC LM230A (-E002) / LM230A-S (-E031) (make Belimo) rated voltage: AC V, 50/60 Hz Functional range : AC V Power consumption : - Operation: 1.5 W - Idle position: 0.4 W Dimensioning : 4 VA Torque : min. 5 Nm Running time : 150 s Sound power level: 35 db (A) Protection class : II protective insulation Degree of protection : IP54 in all mounting positions EMC: CE according to 89 / 336 / EEC Low voltage directive: CE according to 73 / 23 / EEC LF24 (-E021) / LF24-S (-E037) (make Belimo) rated voltage: 24 V AC/DC, 50/60 Hz Functional range : V AC, V DC Power consumption : - running: 5 W - holding: 2.5 W Torque : -Motor: Min. 4 Nm -Spring return: Min. 4 Nm Running time : -Motor: s (0...4 Nm) -Spring return: 20 s (60 s at -30 C) Sound power level: -Motor: 50 db (A) -Spring return: 62 db (A) Protection class : III Safety extra low voltage Degree of protection : IP54 EMC: CE according to 89 / 336 / EEC Low voltage directive: CE according to 73 / 23 / EEC LF230 (-E020) / LF230-S (-E036) (make Belimo) rated voltage: AC 230 V 50/60 Hz; Functional range : AC V Power consumption : - running: 5 W - holding: 3 W Torque : -Motor: Min. 4 Nm -Spring return: Min. 4 Nm Running time : -Motor: s (0...4 Nm) -Spring return: 20 s ( C) Sound power level: -Motor: 50 db (A) -Spring return: 62 db (A) Protection class : II protective insulation Degree of protection : IP54 EMC: CE according to 89 / 336 / EEC Low voltage directive: CE according to 73 / 23 / EEC Auxiliary switch for LM24A-S / LM230A-S / LF24-S / LF230-S - 1 EPU, 1 ma...3 (0.5) A, AC 250 V adjustable % Legend V ZU (m 3 /h) [l/s] = Supply air volume V Nenn (m 3 /h) = Nominal volumetric flow V max (m 3 /h) = Maximum volumetric flow Δp (Pa) = Pressure difference H13 = Filter class H13 H14 = Filter class H14 07/06-13

14 Order code FKF Type Connection Air diffuser Nominal size Mounting Material Example FKF -H MB -SB Paint Antibacterial coating shut-off damper Differential pressure/ aerosol monitoring device Differential pressure transducer AB0 -M000 -D1 -U Tight seal test Rubber lip seal Box dimensions Spigot diameter -P0 -GD1 -KHS -SDS Sample FKF-H MB-SB-9010-AB0-M000-D1-U0-P0-GD1-KHS-SDS Particle filter box type FKF horizontal with round spigot for ceiling swirl diffuser FDQJ NW500 magnetic fastening sheet steel painted to RAL9010 without antibacterial coating without shut-off damper with differential pressure / aerosol monitoring device inside without differential pressure transducer without tight seal test with rubber lip seal height of plenum box standard spigot diameter standard Order details 01 - Type FKF = Filter box for particle filter box with fluid seal 02 - Connection H = horizontal with round spigot (standard) Q = horizontal with rectangular spigot and connection flange V = vertical with round spigot 03 - Air diffuser (must be ordered separately) 41 = Ceiling swirl diffuser FDQJ = Ceiling impulse diffuser FPIL = Ceiling displacement diffuser FDAV Nominal size 400 = NW = NW = NW = NW = NW = NW 800 (not possible for FPIL) 05 - Mounting MB = Magnetic fastening (standard for FDQJ made of sheet steel, not possible for aluminium and stainless steel model) VM = Concealed mounting (standard for air diffusers made of aluminium and stainless steel and for FPIL and FDAV) 06 - Material SB = Sheet steel (standard) V2 = stainless steel (V2A) 07 - Paint 9010 = RAL colour white (standard) xxxx = freely selectable RAL colour SAND = Painted in the colour sand silver (standard for stainless steel) 08 - Antibacterial coating AB0 = Without antibacterial coating (standard) AB1 = with antibacterial coating 09 - Shut-off damper M000 M001 = without shut-off damper (standard) = with manually adjustable shut-off damper with cable (only possible with round connection) E001 = with electrically adjustable shut-off damper, 24V, 3-point E030 = with electrically adjustable shut-off damper, 24V, 3-point, with limit switch E002 = with electrically adjustable shut-off damper, 230V, 3-point activation E031 = with electrically adjustable shut-off damper, 230V, 3-point activation, with limit switch 07/06-14

15 E021 = with electrically adjustable shut-off damper, 24V, 3-point, spring return actuator E037 = with electrically adjustable shut-off damper, 24V, 3-point activation, spring return actuator, with limit switch E020 = with electrically adjustable shut-off damper, 230V, 3-point activation, spring return actuator E036 = with electrically adjustable shut-off damper, 230V, 3-point activation, spring return actuator, with limit switch 10 - Differential pressure / aerosol monitoring device D1 = with differential pressure / aerosol monitoring device inside (standard) D2 = with differential pressure / aerosol monitoring device inside and with pressure take-off point filter / room outside D3 = with differential pressure / aerosol monitoring device inside, with pressure take-off point filter / room outside and aerosol feeding device inside the box (spigot) D4 = with differential pressure / aerosol monitoring device inside and aerosol feeding device inside the box (spigot) D5 = with differential pressure / aerosol monitoring device inside and aerosol feeding device outside (only connection at the spigot) 11 - Differential pressure transducer U0 = without differential pressure transducer (standard) U1 = with differential pressure transducer 12 - Tight seal test P0 = without tight seal test (standard) 13 - Rubber lip seal GD0 = without rubber lip seal at the connection spigot (standard) GD1 = with rubber lip seal at the connection spigot (not possible for FKF-Q-...) 14 - Box dimensions KHS = Height of plenum box standard xxx = Height of box in mm (minimum height = spigot diameter mm, for FPIL-...-Z-... and FDAV-Z-... spigot diameter mm 15 - Spigot diameter SDS = spigot diameter (standard) xxx = spigot diameter in mm (for spigot diameter > than standard only possible with higher plenum box) (max. height of box = 580mm) 07/06-15

16 Order code FDQJ Type Model Blade pattern Air throw Nominal size Material Example FDQJ -Q -SR -Z SB Paint Drill pattern reduced Blades Blade colour Air throw pattern Mounting Antibacterial coating PS -L9005 -B -MB -AB0 Sample FDQJ-Q-SR-Z-500-SB PS-L9005-B-MB-AB0 Ceiling swirl diffuser FDQJ square faceplate circular blade pattern supply air NW500 sheet steel painted to RAL9010 drill pattern not reduced continuous blades plastic blades similar to RAL9005 (black) air throw pattern B with magnetic fastening without antibacterial coating Order details 01 - Type FDQJ = Ceiling swirl diffuser for filter box 02 - Model Q = Square faceplate 03 - Blade pattern SR = circular blade pattern SQ = square blade pattern 04 - Air throw Z A = Supply air = Return air 05 - Nominal size 400 = NW = NW = NW = NW = NW = NW Material SB = Sheet steel (standard) V2 = Stainless steel (V2A, , only possible with VM) AL = Aluminium (only available with VM) 07 - Paint 9010 = RAL colour white (standard) xxxx = RAL colour can be freely selected ELOX = Natural colour anodised (can only be selected for AL) SAND = Painted in the colour sand silver (standard for V2A) 08 - Drill pattern reduced 000 = Drill pattern not reduced (standard) 310 = reduced drill pattern (NW> 310) 400 = reduced drill pattern (NW> 400) 500 = reduced drill pattern (NW> 500) 600 = reduced drill pattern (NW> 600) 09 - Blades PS P0 = Continuous blades (only for supply air) = Without blades (available only for return air) 10 - Blade colour L9005 = Blades made of plastic similar to RAL 9005 (black) L9006 = Blades made of plastic similar to RAL9006 (grey) L9010 = Blades made of plastic similar to RAL9010 (white) Axxxx = Blades made of aluminium, RAL colour can be freely selected = without blades (standard for return air) 11 - Air throw pattern A = all blades in position 2 B = blades in positions 1+2, adjusted ex works C = without blades (standard for return air) V = all blades in position 1 (heating mode only) 07/06-16

17 12 - Mounting MB VM = Magnetic fastening (standard for FDQJ made of sheet steel, not possible for aluminium and stainless steel model and up to NW650) = Concealed mounting (standard for models made of aluminium and stainless steel) 13 - Antibacterial coating AB0 = Without antibacterial coating (standard) AB1 = with antibacterial coating 07/06-17

18 Order code FPIL Type Air volume Model Air throw Nominal size Example FPIL -N -QV -Z Material Paint Drill pattern reduced Mounting Antibacterial coating -SB VM -AB0 Sample FPIL-N-QV-Z-500-SB VM-AB0 Ceiling impulse diffuser for filter box type PIL for normal air volume square faceplate, drill pattern V (standard) I supply air NW500 I sheet steel I painted to RAL9010 I drill pattern not reduced I with concealed mounting I without antibacterial coating Order details 01 - Type FPIL = Ceiling impulse diffuser for filter box 02 Air volume N G = for normal air volume = for large air volume 03 Model QV = Square faceplate, drill pattern V (standard) QS = Square faceplate, drill pattern S (not possible in aluminium) QK = Square faceplate, drill pattern K (not possible in aluminium) 04 - Air throw Z A = Supply air = Return air 05 Nominal size 400 = NW = NW = NW = NW = NW Paint 9010 = RAL colour white (standard) xxxx = freely selectable RAL colour ELOX = Natural colour anodised (can only be selected for AL) 08 - Drill pattern reduced 000 = Drill pattern not reduced (standard) 310 = reduced drill pattern NW > = reduced drill pattern NW > = reduced drill pattern NW > Mounting VM = Concealed mounting (standard) 10 - Antibacterial coating AB0 = Without antibacterial coating (standard) AB1 = with antibacterial coating 06 - Material SB = Sheet steel (standard) AL = Aluminium (natural colour anodised) (for PIL-...-QV-... only) 07/06-18

19 Order code FDAV Type Model Air throw Nominal size Material Example FDAV -Q -Z SB Paint Drill pattern reduced Mounting Antibacterial coating MB -AB0 Sample FDAV-Q-Z-500-SB MB-AB0 Ceiling displacement diffuser type FDAV I square faceplate I supply air NW500 I sheet steel I RAL9010 I drill pattern not reduced I with magnetic fastening I without antibacterial coating Order details 01 - Type FDAV = Filter displacement diffuser FDAV 02 - Model Q = Square faceplate 03 - Air throw Z = Supply air A = Return air 08 - Mounting VM = Concealed mounting (standard) 09 - Antibacterial coating AB0 = Without antibacterial coating (standard) AB1 = with antibacterial coating 04 - Nominal size 400 = NW = NW = NW = NW = NW Material SB = Sheet steel (standard) 06 - Paint 9010 = RAL colour white (standard) xxxx = freely selectable RAL colour 07 - Drill pattern reduced 000 = Drill pattern not reduced (standard) 310 = reduced drill pattern (NW > 310) 400 = reduced drill pattern (NW > 400) 500 = reduced drill pattern (NW > 500) 07/06-19

20 Order code FIL for FKF Type Nominal size Filter frame Filter class Example FIL -FKF H Filter seal Handle cover Filter test -G -G1 -O Sample FIL-FKF600-3-H13-G-G1-O Particle filter for filter box Size 557x557x102 für FKF600 UXA with aluminium frame Filter class H13 fluid seal with handle cover checked oil thread test Order details 01 - Type FIL = Particle filter for filter box 02 - Filter size FKF400 = Size 357x357x102 - Filter for filter box FKF 400 FKF500 = Size 457x457x102 - Filter for filter box FKF 500 FKF600 = Size 557x557x102 - Filter for filter box FKF 600 FKF625 = Size 575x575x102 - Filter for filter box FKF 625 FKF650 = Size 610x610x102 - Filter for filter box FKF 650 FKF800 = Size 754x754x102 - Filter for filter box FKF Filter frame 3 = UXA with aluminium frame 04 - Filter class H13 = filter class H13 (HEPA) H14 = filter class H14 (HEPA) 05 - Filter seal G = Fluid seal 06 - Handle cover G1 = with handle cover 07 - Filter test O = Checked oil thread test (standard) S = Scan test according to DIN EN /06-20

21 Specification texts Particle filter box with safely sealing pressure device and sealing device for installation of filter cells with fluid frame. Filter box is made of electrolytically galvanised sheet steel painted inside and outside to RAL 9010 (white), with horizontal, round, connection pipe. With integrated differential pressure and aerosol monitoring device with measuring spigot inside the box, for hose connection with an inner diameter of 10 mm. Air diffuser fastened with magnetic fastening. Product: SCHAKO type FKF-H with horizontal, round connection spigot and manually adjustable sealing shut-off damper. Leakage at closed shut-off damper according to DIN EN 1751, class 4, at a duct pressure of up to 1000 Pa. Product: SCHAKO type FKF-H-...-M with horizontal, round connection spigot and electrically (OPEN/CLOSED actuator) adjustable sealing shut-off damper (with and without spring return). Leakage at closed shut-off damper according to DIN EN 1751, class 4, at a duct pressure of up to 1000 Pa. Product: SCHAKO type FKF-H-...-Exxx with vertical, round connection spigot Product: SCHAKO type FKF-V with vertical, round connection spigot and manually adjustable shut-off damper. Leakage at closed damper blade according to DIN EN 1751, class 4, at a duct pressure of up to 1000 Pa. Product: SCHAKO type FKF-V-...-M001 - with horizontal, rectangular connection pipe with connection flange Product: SCHAKO type FKF-Q Filter box made of (at an extra charge): (suitable for installation in visible areas) - Stainless steel (V2A) painted in the colour sand silver - with air diffuser, consisting of: - Sheet steel painted to RAL 9010 (white) - Aluminium natural colour anodised E6/EV1 (magnetic fastening not possible) - Stainless steel (V2A, only FDQJ) painted in the colour sand silver (only VM possible) - for supply air/return air: - FDQJ (-41) - FPIL (-42) - FDAV (-43) Accessories (at an extra charge): - Differential pressure device / aerosol monitoring device additionally with 2 measuring spigots on the box outside for a hose with an inner diameter of 4 mm (-D2) - Differential pressure device / aerosol monitoring device additionally with 2 measuring spigots on the box outside for a hose with an inner diameter of 4 mm and an aerosol feeding device in the spigot from the box inside (-D3) - Differential pressure device / aerosol monitoring device additionally with an aerosol feeding device in the spigot from the box inside (-D4) - Differential pressure device / aerosol monitoring device additionally with an aerosol feeding device in the spigot from the outside (-D5) - Differential pressure transducer (-U1), only possible for -D2 and -D3, supplied loose or, as an option, mounted to the box outside - Rubber lip seal (-GD1) made of special rubber (not for FKU- Q) - Particle filter with fluid seal in filter housing, filter frame made of aluminium with double-sided handle cover, oil thread test checked according to DIN EN 1822, temperatureresistant up to 80 C, filter wrapped in film - UXA: filter class H13 (>99.95%) - UXA: filter class H14 (> %) - Scan test checked according to DIN EN 1822 (at an extra charge) - Mounting lever for replacing the filter, made of sheet steel painted to RAL 9010 (white) - Magnetic fastening (-MB) (standard, for FDQJ made of sheet steel, not possible for aluminium and stainless steel model) - Concealed mounting (-VM) (standard for air diffusers made of aluminium and stainless steel and for FPIL and FDAV) - Antibacterial coating (-AB1) 07/06-21

Particle Filter Box FKU

Particle Filter Box FKU Particle Filter Box FKU Ferdinand Schad KG Steigstraße 25-27 D-78600 Kolbingen Telephone +49 (0) 74 63-980 - 0 Fax +49 (0) 74 63-980 - 200 info@schako.de www.schako.de Contents Description...3 Construction...

More information

ceiling swirl diffuser DQJ

ceiling swirl diffuser DQJ ceiling swirl diffuser DQJ Ferdinand Schad KG Steigstraße 25-27 D-78600 Kolbingen Telephone +49 (0) 74 63-980 - 0 Fax +49 (0) 74 63-980 - 200 info@schako.de www.schako.de Contents Description...3 Advantages...

More information

Ceiling impulse diffuser Model PIL

Ceiling impulse diffuser Model PIL Ceiling impulse diffuser Model PIL Ferdinand Schad KG Steigstraße 25-27 D-78600 Kolbingen Telephone +49 (0) 74 63-980 - 0 Fax +49 (0) 74 63-980 - 200 info@schako.de www.schako.de Contents Description...3

More information

Ceiling diffuser 4DE

Ceiling diffuser 4DE Ceiling diffuser 4DE Ferdinand Schad KG Steigstraße 25-27 D-78600 Kolbingen Telefon 0 74 63-980 - 0 Fax 0 74 63-980 - 200 info@schako.de www.schako.de Contents Description...3 Construction... 3 Model...

More information

Swirl Diffuser Model DQF

Swirl Diffuser Model DQF Swirl Diffuser Model DQF Ferdinand Schad KG Steigstraße 25-27 D-78600 Kolbingen Telephone +49 (0) 74 63-980 - 0 Fax +49 (0) 74 63-980 - 200 info@schako.de www.schako.de Contents Description...3 Construction...

More information

ceiling swirl diffuser Model DQJA / DQJR

ceiling swirl diffuser Model DQJA / DQJR ceiling swirl diffuser Model DQJA / DQJR Ferdinand Schad KG Steigstraße 25-27 D-78600 Kolbingen Telephone +49 (0) 74 63-980 - 0 Fax +49 (0) 74 63-980 - 200 info@schako.de www.schako.de Contents Description...3

More information

Ceiling diffuser 4DF

Ceiling diffuser 4DF Ceiling diffuser 4DF Ferdinand Schad KG Steigstraße 25-27 D-78600 Kolbingen Telephone +49 (0) 74 63-980 - 0 Fax +49 (0) 74 63-980 - 200 info@schako.de www.schako.de Contens Description...3 Construction...

More information

Lint separator FLARE

Lint separator FLARE Lint separator FLARE Ferdinand Schad KG Steigstraße 25-27 D-78600 Kolbingen Telefon 0 74 63-980 - 0 Telefax 0 74 63-980 - 200 info@schako.de www.schako.de Contens Description...3 Construction... 3 Model...

More information

Swirl Diffuser DHV Contents Description...3 Models and dimensions...4 Technical data...8

Swirl Diffuser DHV Contents Description...3 Models and dimensions...4 Technical data...8 Swirl diffuser DHV Ferdinand Schad KG Steigstraße 25-27 D-78600 Kolbingen Telephone +49 (0) 74 63-980 - 0 Fax +49 (0) 74 63-980 - 200 info@schako.de www.schako.de Contents Description...3 Construction...

More information

WGA Long throw nozzle grille

WGA Long throw nozzle grille Technical documentation WGA Long throw nozzle grille Contents Function and use... 2 Models... 2 Processing... 3 Accessories... 3 Models and dimensions... 4 Quick selection... 12 Installation situation...

More information

LAQ Return air diffuser

LAQ Return air diffuser LAQ Return air diffuser PERFORMANCE DATA NW 310 / 400 / 500 / 600 / 625 Air volumes at 35 db(a) from 350 m³/h to 1090 m³/h Air volumes at 35 db(a) from 97 l/s to 303 l/s SPECIAL FEATURES suitable for return

More information

Ceiling Swirl Diffuser DQJ

Ceiling Swirl Diffuser DQJ Ceiling Swirl Diffuser DQJ Ferdinand Schad KG Steigstraße 25-27 D-78600 Kolbingen Telephone +49 (0) 74 63-980 - 0 Fax +49 (0) 74 63-980 - 200 info@schako.de www.schako.de contents Description...3 Advantages...

More information

Compact Grille Model KG

Compact Grille Model KG Compact grille KG Ferdinand Schad KG Steigstraße 25-27 D-78600 Kolbingen Telephone +49 (0) 74 63-980 - 0 Fax +49 (0) 74 63-980 - 200 info@schako.de www.schako.de Contents Description...3 Construction...3

More information

Nozzle Jet Diffuser Model DSA

Nozzle Jet Diffuser Model DSA Nozzle Jet Diffuser Model DSA Ferdinand Schad KG Steigstraße 25-27 D-78600 Kolbingen Telephone +49 (0) 74 63-980 - 0 Fax +49 (0) 74 63-980 - 200 info@schako.de www.schako.de Contents Description...3 Application...

More information

Ceiling Slot Diffuser Model DSX

Ceiling Slot Diffuser Model DSX Ceiling Slot Diffuser Model DSX Ferdinand Schad KG Steigstraße 25-27 D-78600 Kolbingen Telephone +49 (0) 74 63-980 - 0 Fax +49 (0) 74 63-980 - 200 info@schako.de www.schako.de Contents Description...3

More information

Ventilation grille Model AL

Ventilation grille Model AL Ventilation grille AL Ferdinand Schad KG Steigstraße 25-27 D-78600 Kolbingen Telephone +49 (0) 74 63-980 - 0 Fax +49 (0) 74 63-980 - 200 info@schako.de www.schako.de Contents Description...3 Construction...

More information

Mechanical mixing box MBM

Mechanical mixing box MBM Mechanical mixing box MBM Ferdinand Schad KG Steigstraße 25-27 D-78600 Kolbingen Telefon 0 74 63-980 - 0 Fax 0 74 63-980 - 200 info@schako.de www.schako.de Contents Description...3 Construction... 3 Model...

More information

Long Throw Nozzle WDA

Long Throw Nozzle WDA Long Throw Nozzle WDA Ferdinand Schad KG Steigstraße 25-27 D-78600 Kolbingen Telephone +49 (0) 74 63-980 - 0 Fax +49 (0) 74 63-980 - 200 info@schako.de www.schako.de Contents Description...3 Construction...

More information

Ceiling Slot Diffuser DSC

Ceiling Slot Diffuser DSC Ceiling Slot Diffuser DSC Ferdinand Schad KG Steigstraße 25-27 D-78600 Kolbingen Telephone +49 (0) 74 63-980 - 0 Fax +49 (0) 74 63-980 - 200 info@schako.de www.schako.de Contents Description...3 Construction...

More information

Ceiling Slot Diffuser DSC

Ceiling Slot Diffuser DSC Ceiling Slot Diffuser DSC Ferdinand Schad KG Steigstraße 25-27 D-78600 Kolbingen Telephone +49 (0) 74 63-980 - 0 Fax +49 (0) 74 63-980 - 200 info@schako.de www.schako.de Contents Description...3 Construction...

More information

Round duct diffuser DBB-RR

Round duct diffuser DBB-RR Round duct diffuser DBB-RR Ferdinand Schad KG Steigstraße 25-27 D-78600 Kolbingen Telephone +49 (0) 74 63-980 - 0 Fax +49 (0) 74 63-980 - 200 info@schako.de www.schako.de Contents Description...3 Construction...

More information

DSC-PLASTER Slot diffuser for plasterboard ceilings

DSC-PLASTER Slot diffuser for plasterboard ceilings Technical documentation DSC-PLASTER Slot diffuser for plasterboard ceilings Contents Function and use... 2 Models... 2 Processing... 2 Dimensions... 3 Band design... 4 Accessories with dimensions... 4

More information

Ventilation Grille PA

Ventilation Grille PA Ventilation grille PA Ferdinand Schad KG Steigstraße 25-27 D-78600 Kolbingen Telephone +49 (0) 74 63-980 - 0 Fax +49 (0) 74 63-980 - 200 info@schako.de www.schako.de Contents Description...3 Construction...

More information

Round duct grille Model KG-RR

Round duct grille Model KG-RR Round duct grille Model KG-RR Ferdinand Schad KG Steigstraße 25-27 D-78600 Kolbingen Telephone +49 (0) 74 63-980 - 0 Fax +49 (0) 74 63-980 - 200 info@schako.de www.schako.de Contents Description...3 Construction...

More information

Ceiling Slot Diffuser DSC

Ceiling Slot Diffuser DSC Ceiling Slot Diffuser DSC Ferdinand Schad KG Steigstraße 25-27 D-78600 Kolbingen Telephone +49 (0) 74 63-980 - 0 Fax +49 (0) 74 63-980 - 200 info@schako.de www.schako.de Contents Description...3 Construction...

More information

Ventilation grille Model IB-R

Ventilation grille Model IB-R Ventilation grille Model IB-R Ferdinand Schad KG Steigstraße 25-27 D-78600 Kolbingen Telephone +49 (0) 74 63-980 - 0 Fax +49 (0) 74 63-980 - 200 info@schako.de www.schako.de Contents Description...3 Construction...

More information

Ceiling induction diffuser DISA-300

Ceiling induction diffuser DISA-300 Ceiling induction diffuser DISA-300 Ferdinand Schad KG Steigstraße 25-27 D-78600 Kolbingen Telephone +49 (0) 74 63-980 - 0 Fax +49 (0) 74 63-980 - 200 info@schako.de www.schako.de Contents Description...3

More information

Air diffuser system Model AUDIX -AW

Air diffuser system Model AUDIX -AW Air diffuser system Model AUDIX -AW Ferdinand Schad KG Steigstraße 25-27 D-78600 Kolbingen Telephone +49 (0) 74 63-980 - 0 Fax +49 (0) 74 63-980 - 200 info@schako.de www.schako.de Contents Description...3

More information

Ceiling induction diffuser DISA-601

Ceiling induction diffuser DISA-601 Ceiling induction diffuser DISA-601 Ferdinand Schad KG Steigstraße 25-27 D-78600 Kolbingen Phone +49 (0) 74 63-980 - 0 Fax +49 (0) 74 63-980 - 200 info@schako.de www.schako.de Contents Description...3

More information

Technical documentation

Technical documentation VM-PRO Mechanical volumetric flow control- Table of Contents Areas of application... 2 Useable volumetric flow ranges... 2 Function... 3 Processing... 3 Available sizes / -dimensions... 4 Accessories list

More information

Volumetric Flow Limiter VOLKOM

Volumetric Flow Limiter VOLKOM Volumetric Flow Limiter Ferdinand Schad KG Steigstraße 25-27 D-78600 Kolbingen Telephone +49 (0) 74 63-980 - 0 Fax +49 (0) 74 63-980 - 200 info@schako.de www.schako.de Contents Description...3 Field of

More information

Shut-off dampers. Type AK-Ex. For low-leakage shut-off of volume flows in potentially. explosive atmospheres (ATEX) PD AK-Ex 1.

Shut-off dampers. Type AK-Ex. For low-leakage shut-off of volume flows in potentially. explosive atmospheres (ATEX) PD AK-Ex 1. X X testregistrierung Shut-off dampers Type ATEX-compliant parts and units For low-leakage shut-off of volume flows in potentially explosive atmospheres (ATEX) Circular shut-off dampers for shutting off

More information

Slot diffusers, Round duct diffusers. IMP Klima

Slot diffusers, Round duct diffusers. IMP Klima , Round duct diffusers 04 Round duct diffusers 176 , Round duct diffusers SLOT DIFFUSERS, ROUND DUCT DIFFUSERS SWIRL DIFFUSERS, VARIABLE SWIRL DIFFUSERS CIRCULAR DIFFUSERS, SQUARE DIFFUSERS VENTILATING

More information

Additional operating instructions according to ATEX 94/9/EC Volumetric flow controller VM-PRO-Ex

Additional operating instructions according to ATEX 94/9/EC Volumetric flow controller VM-PRO-Ex Additional operating instructions according to ATEX 94/9/EC Volumetric flow controller VM-PRO-Ex Ferdinand Schad KG Steigstraße 25-27 D-78600 Kolbingen Telefon 0 74 63-980 - 0 Telefax 0 74 63-980 - 200

More information

Type AK-Ex FOR LOW-LEAKAGE SHUT-OFF OF VOLUME FLOWS IN POTENTIALLY EXPLOSIVE ATMOSPHERES (ATEX)

Type AK-Ex FOR LOW-LEAKAGE SHUT-OFF OF VOLUME FLOWS IN POTENTIALLY EXPLOSIVE ATMOSPHERES (ATEX) Homepage > Products > Control units > Shut-off and restriction > Shut-Off Devices > Type AK-Ex Type AK-Ex FOR LOW-LEAKAGE SHUT-OFF OF VOLUME FLOWS IN POTENTIALLY EXPLOSIVE ATMOSPHERES (ATEX) Circular shut-off

More information

Ceiling swirl diffusers

Ceiling swirl diffusers X X testregistrierung Ceiling swirl diffusers Type Horizontal swirling air discharge Adjustable blades Protective cage For high rooms, with adjustable air control blades Circular ceiling swirl diffusers,

More information

Accessories. Balancing plenum PRI For balancing & equalising the airflow and attenuating the duct noise

Accessories. Balancing plenum PRI For balancing & equalising the airflow and attenuating the duct noise Halton AWE/AWU Universal Grille Horizontal air supply, suitable also for exhaust Fixed front vanes, stable throw pattern with vertical 15 deflection: AWE, no deflection: AWU Adjustable rear vanes for horizontal

More information

SLOT DIFFUSERS, ROUND DUCT DIFFUSERS

SLOT DIFFUSERS, ROUND DUCT DIFFUSERS SLOT DIFFUSERS, ROUND DUCT DIFFUSERS Slot diffusers LD-3, LD-4, LD-5 LD-3 LD-4 LD-5 SLOT DIFFUSERS Application: Slot diffusers are designed for air supply in rooms with floor to ceiling heights of 2.5

More information

Fan coil unit NBS 100/150

Fan coil unit NBS 100/150 Fan coil unit /150 Ferdinand Schad KG Steigstraße 25-27 D-78600 Kolbingen Telephone +49 (0) 74 63-980 - 0 Fax +49 (0) 74 63-980 - 200 info@schako.de www.schako.de Contents Description...3 Advantages...3

More information

DKR - Multi-nozzle Ceiling Diffuser. Halton DKR. Multi-nozzle Ceiling Diffuser

DKR - Multi-nozzle Ceiling Diffuser. Halton DKR. Multi-nozzle Ceiling Diffuser Halton DKR Multi-nozzle Ceiling Diffuser Horizontal air supply, vertical air patterns are also possible Supply air pattern can freely be directed in up to four directions or alternatively radially as swirl

More information

Round Duct System Accessories RR - accessories

Round Duct System Accessories RR - accessories Round Duct System Accessories RR - accessories Ferdinand Schad KG Steigstraße 25-27 D-78600 Kolbingen Telefon 0 74 63-980 - 0 Telefax 0 74 63-980 - 200 info@schako.de www.schako.de Round Duct System Accessories

More information

Ceiling swirl diffusers

Ceiling swirl diffusers X X testregistrierung Ceiling swirl diffusers Type Horizontal swirling air discharge Vertical air discharge Protective cage For high rooms, with adjustable air control blades Square ceiling swirl diffusers,

More information

DFB - Conical Ceiling Diffuser. Halton DFB. Conical Ceiling Diffuser

DFB - Conical Ceiling Diffuser. Halton DFB. Conical Ceiling Diffuser Halton DFB Conical Ceiling Diffuser Horizontal air supply, suitable also for exhaust Installation flush to the ceiling, light-weight aluminium design Circular duct connection with rubber gasket All sizes

More information

THB - Perforated Ceiling Diffuser. Halton THB. Perforated Ceiling Diffuser

THB - Perforated Ceiling Diffuser. Halton THB. Perforated Ceiling Diffuser Halton THB Perforated Ceiling Diffuser Horizontal air supply, suitable also for exhaust Installation either directly to ductwork or balancing plenum Detachable front panel enables the cleaning of the diffuser

More information

DKS - Multi-nozzle Ceiling Diffuser. Halton DKS. Multi-nozzle Ceiling Diffuser

DKS - Multi-nozzle Ceiling Diffuser. Halton DKS. Multi-nozzle Ceiling Diffuser Halton DKS Multi-nozzle Ceiling Diffuser Horizontal air supply, vertical air patterns also possible Supply air pattern can freely be directed in up to four directions or alternatively radially as swirl

More information

Ceiling swirl diffusers with perforated face plate

Ceiling swirl diffusers with perforated face plate X X testregistrierung Ceiling swirl diffusers with perforated face plate Type Horizontal swirling air discharge For horizontal swirling supply air discharge creating high induction levels, with fixed air

More information

DCS - Ceiling Diffuser. Halton DCS. Ceiling Diffuser

DCS - Ceiling Diffuser. Halton DCS. Ceiling Diffuser Halton DCS Ceiling Diffuser DCS/C DCS/A DCS/N DCS/J DCS/P Horizontal air supply, suitable also for exhaust Modular construction with five different, interchangeable front panel options suited for modular

More information

WDD/WSD - Grille. Halton WDD/WSD. Universal Grille

WDD/WSD - Grille. Halton WDD/WSD. Universal Grille Halton WDD/WSD Universal Grille Horizontal air supply, suitable also for exhaust Adjustable vertical front vanes, adjustable horizontal rear vanes: WDD, adjustable horizontal vanes: WSD Aluminium construction

More information

TBV - Terminal Unit. Halton TBV. Terminal Unit

TBV - Terminal Unit. Halton TBV. Terminal Unit Halton TBV Terminal Unit Horizontal air supply, suitable also for exhaust Integrated rectangular balancing plenum with measurement and adjustment functions Effective sound attenuation Circular duct connection

More information

Ceiling diffusers. Type VDR. For large temperature differences in heating mode, high penetration of air, with adjustable air control blades

Ceiling diffusers. Type VDR. For large temperature differences in heating mode, high penetration of air, with adjustable air control blades X X testregistrierung Type Vertical air discharge Horizontal air discharge For large temperature differences in heating mode, high penetration of air, with adjustable air control blades Circular ceiling

More information

DFA - Conical Ceiling Diffuser. Halton DFA. Conical Ceiling Diffuser

DFA - Conical Ceiling Diffuser. Halton DFA. Conical Ceiling Diffuser Halton DFA Conical Ceiling Diffuser Horizontal air supply, suitable also for exhaust Installation flush to the ceiling, light-weight aluminium design Circular duct connection with rubber gasket Openable

More information

GDD - Supply Grille. Halton GDD. Supply Grille

GDD - Supply Grille. Halton GDD. Supply Grille Halton GDD Supply Grille Horizontal supply, for circular duct installations For cooling and heating applications; suitable also for exhaust Adjustable vertical front vanes, adjustable horizontal rear vanes

More information

Type VDL FOR HIGH ROOMS, WITH ADJUSTABLE AIR CONTROL BLADES. Homepage > Products > Air Diffusers > Swirl diffusers > Type VDL

Type VDL FOR HIGH ROOMS, WITH ADJUSTABLE AIR CONTROL BLADES. Homepage > Products > Air Diffusers > Swirl diffusers > Type VDL Homepage > Products > Air Diffusers > Swirl diffusers > Type VDL Type VDL FOR HIGH ROOMS, WITH ADJUSTABLE AIR CONTROL BLADES Circular ceiling swirl diffusers, with manual or motorised adjustment of the

More information

Front panel Perforated galvanised steel Stainless steel AISI 316 as option Casing Galvanised steel Stainless steel AISI 316 as option

Front panel Perforated galvanised steel Stainless steel AISI 316 as option Casing Galvanised steel Stainless steel AISI 316 as option ZSC - Halton Zen Semi-Circle Displacement ventilation unit Capacity for wide supply airflow range. Uniform supply air distribution is achieved through small perforations, providing optimal conditions in

More information

Puri-Drall PDK. Puri-Clean PCK. Puri-Inlet PEK. HEPA filter air outlet with pull-down outlet element

Puri-Drall PDK. Puri-Clean PCK. Puri-Inlet PEK. HEPA filter air outlet with pull-down outlet element Cleanroom systems Puri-Drall PDK. Puri-Clean PCK. Puri-Inlet PEK. with pull-down outlet element DS 4178 E 01.201 Preliminary remarks Materials and designs As a rule, turbulent mixing ventilation is used

More information

C O L M A N. Air Distribution PERFORATED FACE DIFFUSERS P SERIES SERIES

C O L M A N. Air Distribution PERFORATED FACE DIFFUSERS P SERIES SERIES C O L M A N Air Distribution E N G I N E E R E D A I R P R O D U C T S PERFORATED FACE DIFFUSERS P SERIES P SERIES PERFORATED FACE DIFFUSERS P SERIES QUALITY AND EFFICIENCY WITHOUT COMPROMISE Application:

More information

Round Duct System Model RR-Complete

Round Duct System Model RR-Complete Round Duct System Model RR-Complete Ferdinand Schad KG Steigstraße 25-27 D-78600 Kolbingen Telephone +49 (0) 74 63-980 - 0 Fax +49 (0) 74 63-980 - 200 info@schako.de www.schako.de Contents Description...4

More information

C O L M A N. Air Distribution JET DIFFUSERS DCJ SERIES DCJ SERIES

C O L M A N. Air Distribution JET DIFFUSERS DCJ SERIES DCJ SERIES C O L M A N Air Distribution E N G I N E E R E D A I R P R O D U C T S JET DIFFUSERS DCJ SERIES DCJ SERIES DCJ SERIES JET DIFFUSERS Application Colman s DCJ jet diffuser has been designed to supply cooled

More information

Round Duct System Model RR-Complete

Round Duct System Model RR-Complete Round Duct System Model RR-Complete Ferdinand Schad KG Steigstraße 25-27 D-78600 Kolbingen Telephone +49 (0) 74 63-980 - 0 Fax +49 (0) 74 63-980 - 200 info@schako.de www.schako.de Contents Description...4

More information

Ceiling swirl diffusers

Ceiling swirl diffusers X X testregistrierung Ceiling swirl diffusers Type RFD-Sirius, cross bar Horizontal swirling air discharge Circular diffuser face, integral measuring tubes is an air terminal device combined with a VAV

More information

TCM - Conical Ceiling Diffuser. Halton TCM. Conical Ceiling Diffuser

TCM - Conical Ceiling Diffuser. Halton TCM. Conical Ceiling Diffuser Halton TCM Conical Ceiling Diffuser Horizontal air supply, suitable also for exhaust Suitable for cooling applications with supply/room air temperature difference as low as -12 C Installation flush to

More information

Accessories. Front vane panel Coupling sleeve with gasket Galvanised steel Gasket of rubber compound

Accessories. Front vane panel Coupling sleeve with gasket Galvanised steel Gasket of rubber compound Halton TSR/TSS Swirl Diffuser Radial horizontal air supply Air velocity is effectively reduced due to high mixing effect Circular duct connection with gasket All sizes available as an adapted version for

More information

HEPA terminal filter units Ceiling diffusers: F640, F650, F654, F655, F656, F659, F660 Wall grilles: F670

HEPA terminal filter units Ceiling diffusers: F640, F650, F654, F655, F656, F659, F660 Wall grilles: F670 HPA terminal filter units eiling diffusers: 60, 650, 65, 655, 656, 659, 660 Wall grilles: 670 or critical air purity and hygiene requirements Used in medicine, biology, pharmaceuticals, and sensitive technical

More information

HDF - Exhaust Grille. Halton HDF. Exhaust Grille

HDF - Exhaust Grille. Halton HDF. Exhaust Grille Halton HDF Exhaust Grille Large free area Integrated filter of class EU3 Reduced visibility through grille due to shaped horizontal vanes Sizes adapted to suit modular 600 x 600 mm suspended ceilings Openable

More information

Weather protection grille ALAS

Weather protection grille ALAS Weather protection grille ALAS Ferdinand Schad KG Steigstraße 25-27 D-78600 Kolbingen Telephone +49 (0) 74 63-980 - 0 Fax +49 (0) 74 63-980 - 200 info@schako.de www.schako.de Contents Description...3 Construction...

More information

DRUM SLOT DIFFUSER TYPE: RT350

DRUM SLOT DIFFUSER TYPE: RT350 TYPE: RT3 RT1 + RP301 98 RT2 + RP302 37 123 13.5 75.5 214 Application The RT3 drum slot diffuser is suitable for the supply and exhaust of cooled and warmed air in offices, shops, meeting rooms, etc. The

More information

C O L M A N. Air Distribution LINEAR SLOT DIFFUSERS CD SERIES SERIES

C O L M A N. Air Distribution LINEAR SLOT DIFFUSERS CD SERIES SERIES C O L M A N Air Distribution E N G I N E E R E D A I R P R O D U C T S LINEAR SLOT DIFFUSERS CD SERIES CD SERIES LINEAR SLOT DIFFUSERS QUALITY AND EFFICIENCY WITHOUT COMPROMISE Application Colman Moducel

More information

CNVA TECHNICAL DOCUMENTATION. Active floor convector. Contents

CNVA TECHNICAL DOCUMENTATION. Active floor convector. Contents CNVA Active floor convector Contents General description... 2 Advantages/Customer benefits... 2 Operation... 2 Description of the equipment... 3 Construction and Dimensions... 4 Accessories... 7 Connections...

More information

C O L M A N. Air Distribution LINEAR BAR GRILLES T SERIES SERIES

C O L M A N. Air Distribution LINEAR BAR GRILLES T SERIES SERIES C O L M A N Air Distribution E N G I N E E R E D A I R P R O D U C T S LINEAR BAR GRILLES T SERIES T SERIES C O L M A N Air Distribution E N G I N E E R E D A I R P R O D U C T S LINEAR BAR GRILLES T SERIES

More information

TRB - Conical Ceiling Diffuser. Halton TRB. Conical Ceiling Diffuser

TRB - Conical Ceiling Diffuser. Halton TRB. Conical Ceiling Diffuser Halton TRB Conical Ceiling Diffuser Horizontal or vertical air supply, suitable for both heating and cooling applications Supply air jet velocity is effectively reduced due to high mixing effect Installation

More information

FALCON Ceiling. Circular ceiling air diffuser for supply air QUICK FACTS

FALCON Ceiling. Circular ceiling air diffuser for supply air QUICK FACTS Circular ceiling air diffuser for supply air QUICK FACTS Manages large supply airflows Horizontal or vertical distribution pattern Provision for motorised adjustment of the distribution pattern Suitable

More information

Fire Damper BSK-RPR. with general building supervisory approval Z

Fire Damper BSK-RPR. with general building supervisory approval Z Fire Damper BSK-RPR with general building supervisory approval Z-41.3-681 Ferdinand Schad KG Steigstraße 25-27 D-78600 Kolbingen Telephone +49 (0) 74 63-980 - 0 Fax +49 (0) 74 63-980 - 200 info@schako.de

More information

CRP. Commissioning damper, Ductwork Leakage Class 0 QUICK FACTS. Perforated damper blade for better damper characteristic

CRP. Commissioning damper, Ductwork Leakage Class 0 QUICK FACTS. Perforated damper blade for better damper characteristic Commissioning damper, Ductwork Leakage Class 0 QUICK FACTS Perforated damper blade for better damper characteristic Manually adjustable blade (standard) Provision for motorised regulation Quick connection

More information

UTK/UTT - Multi-blade Damper. Halton UTK, UTT. Multi-blade Damper

UTK/UTT - Multi-blade Damper. Halton UTK, UTT. Multi-blade Damper Halton UTK, UTT Multi-blade Damper Temperature operation range up to +100 C, optionally up to +200 C Galvanised steel design Classification of casing leakage EN 1751 class B UTK: Shut-off, adjustment,

More information

CAV controllers. Type VFL. Volume flow limiter for insertion into ducting K

CAV controllers. Type VFL. Volume flow limiter for insertion into ducting K .1 X X testregistrierung CAV controllers Type Aerodynamic damper blade Sticker showing volume flow rates Set the volume flow rate Insert Volume flow limiter for insertion into ducting Circular, mechanical

More information

Plaster In Grilles 1/1.5/B/1. AHP Plaster-in Linear Bar Grille ADMP Plaster-in Linear Diffuser ALSP Plaster-in Linear Slot Diffuser

Plaster In Grilles 1/1.5/B/1. AHP Plaster-in Linear Bar Grille ADMP Plaster-in Linear Diffuser ALSP Plaster-in Linear Slot Diffuser 1/1.5/B/1 Plaster In Grilles AHP Plaster-in Linear Bar Grille ADMP Plaster-in Linear Diffuser ALSP Plaster-in Linear Slot Diffuser TROX UK Ltd Caxton Way Thetford Norfolk IP24 3SQ Telephone +44 (0) 1842

More information

Type ISH FOR INDUSTRIAL ZONES WITHOUT AIR POLLUTING PROCESSES

Type ISH FOR INDUSTRIAL ZONES WITHOUT AIR POLLUTING PROCESSES Homepage > Products > Air Diffusers > Industrial diffusers > Diffusers for high momentum > Type ISH Type ISH FOR INDUSTRIAL ZONES WITHOUT AIR POLLUTING PROCESSES Impulse diffusers with horizontal air discharge

More information

C O L M A N. Air Distribution SWIRL DIFFUSERS DWT SERIES DWT SERIES

C O L M A N. Air Distribution SWIRL DIFFUSERS DWT SERIES DWT SERIES C O L M A N Air Distribution E N G I N E E R E D A I R P R O D U C T S SWIRL DIFFUSERS DWT SERIES DWT SERIES DISTRIBUTION PATTERNS & FIXING OPTIONS Application The DWT Series of swirl diffusers have been

More information

Maximum Protection in Filter Systems CGF/CGG. GEA Ceiling Air Outlets Data & Facts. GEA Heat Exchangers / GEA Air Treatment

Maximum Protection in Filter Systems CGF/CGG. GEA Ceiling Air Outlets Data & Facts. GEA Heat Exchangers / GEA Air Treatment Maximum Protection in Filter Systems CGF/CGG GEA Ceiling Air Outlets Data & Facts GEA Heat Exchangers / GEA Air Treatment Table of Contents Technical Description... 3 Application and Components... 3 Components...

More information

DAC - Conical Diffuser. Halton DAC. Conical diffuser

DAC - Conical Diffuser. Halton DAC. Conical diffuser Halton DAC Conical diffuser Coanda effect provided with a wide range of air flow rates, thanks to the special profile of the diffuser blades Diffuser adapted for variable air flow Supply in four directions

More information

DHL - HEPA terminal filter diffuser DHL. HEPA terminal filter diffuser

DHL - HEPA terminal filter diffuser DHL. HEPA terminal filter diffuser DHL HEPA terminal filter diffuser Low turbulent flow diffuser (LTF), also suitable for exhaust Installation flush to the ceiling, also suitable for wall installation A measurement access through the diffuser

More information

PTS - Single-Blade Damper. Halton PTS. Single-Blade Damper

PTS - Single-Blade Damper. Halton PTS. Single-Blade Damper Halton PTS Single-Blade Damper Shut-off, adjustment, balancing or control damper Casing leakage classification: EN 1751, Class C Casing and damper blade made of galvanised steel Tightness classification

More information

LINEAR BAR GRILLES T SERIES. Quality and e!ciency without compromise

LINEAR BAR GRILLES T SERIES. Quality and e!ciency without compromise LINEAR BAR GRILLES T SERIES Quality and e!ciency without compromise Weltech Business Centre - Ridgeway - Welwyn Garden City - Hertfordshire AL7 2AA Tel: 01707 871526 - Fax: 01707 871 527 - email sales@jprservices.co.uk

More information

Fire damper BKA-EN. with general technical approval Z tested according to DIN EN

Fire damper BKA-EN. with general technical approval Z tested according to DIN EN Fire damper BKA-EN with general technical approval Z-41.3-667 tested according to DIN EN 1366-2 Ferdinand Schad KG Steigstraße 25-27 D-78600 Kolbingen Phone +49 (0) 74 63-980 - 0 Fax +49 (0) 74 63-980

More information

Adjustable Curved Vane Diffusers. Vanes are parallel to the width dimension Vanes are parallel to the height dimension

Adjustable Curved Vane Diffusers. Vanes are parallel to the width dimension Vanes are parallel to the height dimension Adjustable Curved Vane Diffusers ACDH ACDV Vanes are parallel to the width dimension Vanes are parallel to the height dimension Diffusers 2 Adjustable Curved Vane Diffusers ACDH / ACDV Introduction The

More information

CAV controllers. Type VFL. Volume flow limiter for insertion into ducting PD VFL 1

CAV controllers. Type VFL. Volume flow limiter for insertion into ducting PD VFL 1 X X testregistrierung CAV controllers Type Aerodynamic damper blade Sticker showing volume flow rates Set the volume flow rate Insert Volume flow limiter for insertion into ducting Circular, mechanical

More information

AHF - Exhaust Grille. Halton AHF. Exhaust Grille

AHF - Exhaust Grille. Halton AHF. Exhaust Grille Halton AHF Exhaust Grille Large free area, high airflow rates with minimal pressure drop Integrated filter of class EU3 Reduced visibility through grille due to shaped horizontal vanes Sizes adapted to

More information

Small Format Circular Diffusers. Small format circular diffuse

Small Format Circular Diffusers. Small format circular diffuse Small Format Circular Diffusers Small format circular diffuse Diffusers Small Format Circular Diffusers Introduction The Waterloo diffuser has been designed for both supply and exhaust applications requiring

More information

Ceiling swirl diffusers with perforated face plate

Ceiling swirl diffusers with perforated face plate X X testregistrierung Ceiling swirl diffusers with perforated face plate Type Horizontal swirling air discharge Diffuser face plate with perforated circular face style and exposed discharge nozzle Diffuser

More information

ADJUSTABLE PERFORATED AIR SUPPLY DIFFUSER TYPE: DC560S

ADJUSTABLE PERFORATED AIR SUPPLY DIFFUSER TYPE: DC560S Adjusting options: Construction: diffuser: steel, painted white (RAL 9) deflector plate: steel painted black (RAL 95) plenum: galvanised steel sheet with side entry, insulated or non-insulated only suitable

More information

C O L M A N. Air Distribution LINEAR SLOT DIFFUSERS CE SERIES SERIES

C O L M A N. Air Distribution LINEAR SLOT DIFFUSERS CE SERIES SERIES C O L M A N Air Distribution E N G I N E E R E D A I R P R O D U C T S LINEAR SLOT DIFFUSERS CE SERIES CE SERIES LINEAR SLOT DIFFUSERS CE SERIES QUALITY AND EFFICIENCY WITHOUT COMPROMISE Application Colman

More information

Type AK FOR LOW-LEAKAGE SHUT-OFF. Homepage > Products > Control units > Shut-off and restriction > Shut-Off Devices > Type AK

Type AK FOR LOW-LEAKAGE SHUT-OFF. Homepage > Products > Control units > Shut-off and restriction > Shut-Off Devices > Type AK Homepage > Products > Control units > Shut-off and restriction > Shut-Off Devices > Type AK Type AK FOR LOW-LEAKAGE SHUT-OFF Circular shut-off dampers for shutting off volume flows in ventilation ducts

More information

Type DCS FOR HORIZONTAL SWIRLING SUPPLY AIR DISCHARGE CREATING HIGH INDUCTION LEVELS, WITH FIXED AIR CONTROL BLADES

Type DCS FOR HORIZONTAL SWIRLING SUPPLY AIR DISCHARGE CREATING HIGH INDUCTION LEVELS, WITH FIXED AIR CONTROL BLADES Homepage > Products > Grilles and Diffusers > Ceiling diffusers > Ceiling swirl diffusers with perforated face plate > Type DCS Type DCS FOR HORIZONTAL SWIRLING SUPPLY AIR DISCHARGE CREATING HIGH INDUCTION

More information

volumetric flow controller Model VRA-Q Smart

volumetric flow controller Model VRA-Q Smart volumetric flow controller Model VRA-Q Smart Ferdinand Schad KG Steigstraße 25-27 D-78600 Kolbingen Telephone +49 (0) 74 63-980 - 0 Fax +49 (0) 74 63-980 - 200 info@schako.de www.schako.de Contents Description...3

More information

Technical data. Safety notes. Power consumption In operation At rest For wire sizing. 1 nominal torque 0.2 W 2 VA Auxiliary switch

Technical data. Safety notes. Power consumption In operation At rest For wire sizing. 1 nominal torque 0.2 W 2 VA Auxiliary switch echnical data sheet Damper actuator LM4A-S-P Damper actuator for operating air control dampers in ventilation and air-conditioning systems for building services installations For air control dampers up

More information

DCV-CF DCV-CF. DCV-CF Pressure control with airflow measuring CFL Version B03. Pressure controlwith airflow measuring. Product description

DCV-CF DCV-CF. DCV-CF Pressure control with airflow measuring CFL Version B03. Pressure controlwith airflow measuring. Product description DCV-CF Pressure controlwith airflow measuring 24VAC + Communication Pressure control with airflow measuring DCV-CF DIN 24VAC + Communication AIN AOUT SMART DAMPERS & MEASURING UNITS PRESSURE & FLOW DCV-CF

More information

Air Distribution SWIRL DIFFUSERS DW SERIES SERIES

Air Distribution SWIRL DIFFUSERS DW SERIES SERIES COLMAN Air Distribution E N G I N E E R E D SWIRL DIFFUSERS DW SERIES DW SERIES A I R P R O D U C T S SWIRL DIFFUSERS DW SERIES QUALITY AND EFFICIENCY WITHOUT COMPROMISE Application The DW type swirl diffuser

More information

VAV terminal units. Type TVM. For dual duct systems PD TVM 1

VAV terminal units. Type TVM. For dual duct systems PD TVM 1 X X testregistrierung VAV terminal units Type Variant -S Rectangular connection on the room end For dual duct systems VAV dual duct terminal units for dual duct systems with variable volume flows in buildings

More information

THL - Conical Ceiling Diffuser. Halton THL. Conical Ceiling Diffuser

THL - Conical Ceiling Diffuser. Halton THL. Conical Ceiling Diffuser Halton THL Conical Ceiling Diffuser Horizontal or vertical air supply, suitable for both heating and cooling applications Adjustable throw pattern and pressure drop Installation flush to the ceiling, or

More information

Krantz. Trapezoidal displacement outlet VA-T... Semi-trapezoidal displacement outlet VA-TH... Air distribution systems

Krantz. Trapezoidal displacement outlet VA-T... Semi-trapezoidal displacement outlet VA-TH... Air distribution systems Trapezoidal displacement outlet VA-T... Semi-trapezoidal displacement outlet VA-TH... Air distribution systems DS 10 E 01.018 Preliminary remarks Where workplaces or production facilities have to be kept

More information