Split Tees BRUVAL. Description. Sizes: 12 up to 68 inches. We provide fittings up to 68 inches.
|
|
|
- Constance Franklin
- 5 years ago
- Views:
Transcription
1 BRUVAL Split Tees Sizes: 12 up to 68 inches TECHNICAL SPECIFICATION We provide fittings up to 68 inches. Description BRUVAL provides a wide variety of standard and customised Fittings from 12 to 68 inches, engineered to complement our Holing and FlowStopper Machines. Our Fittings are also compatible with the marketstandard pipeline equipment. We manufacture Split Tees matching ASME Class from 150 to 1500 and available for operating pressures up to 250 bar. Our Fitting welding are 100% radiographically and ultrasonically inspected. BRUVAL standard and customised Split Tees, operating with standard or non-standard Flanges, are used to fix the BRUVAL High-Pressure Gate Valve, allowing to carry out repair activities, maintenance or installation of bypasses without pipeline shutdown.
2 BRUVAL Split Tees C PRODUCTS 2 A B _.0000 /class ASME, bar EN, GOST / C ASME C ASME C ASME C ASME C ASME C ASME C ASME C ASME C ASME C ASME C ASME C ASME C ASME C ASME C ASME C ASME C ASME C ASME C ASME C ASME C ASME C ASME C ASME C ASME C ASME C ASME C ASME C ASME C ASME C ASME
3 PRODUCTS 3 /class ASME, bar EN, GOST / C ASME C ASME C ASME C ASME C ASME C ASME C ASME C ASME C ASME C ASME C ASME C ASME C ASME C ASME C ASME C ASME C ASME C ASME C ASME C ASME C ASME C ASME C ASME C ASME C ASME C ASME C ASME C ASME C ASME C ASME C ASME C ASME C ASME C ASME C ASME C ASME C ASME C ASME C ASME C ASME C ASME C ASME C ASME C ASME C ASME
4 PRODUCTS 4 /class ASME, bar EN, GOST / C ASME P EN P EN P EN P EN P EN P EN P EN P EN P EN P EN P EN P EN P EN P EN P EN P EN P EN P EN P EN P EN P EN P EN P EN P EN P EN P EN P EN P EN P EN P EN P EN P EN P EN P EN P EN P EN P EN P EN P EN P EN P EN P EN P EN P EN
5 PRODUCTS 5 /class ASME, bar EN, GOST / P EN P EN P EN P EN P EN P EN P EN P EN P EN P EN P EN P EN P EN P EN P EN P EN P EN P EN P EN P EN P EN P EN P EN P EN P EN P EN P EN P EN P EN P EN P EN P EN P EN P EN P EN P EN P EN P EN P EN P EN P EN P EN P EN P EN P GOST
6 PRODUCTS 6 /class ASME, bar EN, GOST / P GOST P GOST P GOST P GOST P GOST P GOST P GOST P GOST P GOST P GOST P GOST P GOST P GOST P GOST P GOST P GOST P GOST P GOST P GOST P GOST P GOST P GOST P GOST P GOST P GOST P GOST P GOST P GOST P GOST P GOST P GOST P GOST P GOST P GOST P GOST P GOST P GOST P GOST P GOST P GOST P GOST P GOST P GOST P GOST P GOST
7 PRODUCTS 7 /class ASME, bar EN, GOST / P GOST P GOST P GOST P GOST P GOST P GOST
High-Pressure Pipeline Equipment
BROCHURE High-Pressure Pipeline Equipment High-Pressure Gate Valves PRODUCTS 3 Our standard and customised High-Pressure Gate Valves, compatible with the market pipeline equipment, are designed and manufactured
660 Tapping Machine. Features
660 Tapping Machine Sizes: 3- to12-inch Model 660C Bulletin No: 1000.005.06 Version: 07.2015 Cross Indexing No: n/a Supersedes: 1000.005.05 (06.2015) Model 660C Tapping Machines can be either air or hydraulically
760 Tapping Machine. Features. The basic machine includes: Lower-in crank Measuring rod Retainer rod pusher Ring gasket
760 Tapping Machine Sizes: 3- to 16-inch Model 760C Bulletin No: 1000.006.08 Version: 07.2015 Cross Indexing No: n/a Supersedes: 1000.006.07 (06.2015) Model 760C Tapping Machines can be either air or hydraulically
860 Tapping Machine. Features
860 Tapping Machine Sizes: 4- through 20-inch Model 860b Bulletin No: 1000.008.05 Date: April 2010 Cross Indexing No: n/a Supersedes: 1000.008.04 (11/08) Typical Tapping Setup 860 Tapping Machine Split
STOPPLE Plus Fittings
STOPPLE Plus Fittings Sizes: 4- Through 36-inch Bulletin No: 1100.007.02 Version: 08.2014 Cross Indexing No: n/a Supercedes: 1100.007.01 (06.2014) Offset in closeup Options Description STOPPLE Plus fittings
360 Tapping Machine. Description
Sizes: 2- to 6-inch Model 360B Bulletin No: 1000.004.08 Version: 06.2018 Cross Indexing No: n/a Supersedes: 1000.004.07 (12.2017) Description Tapping machines are used for making connections to pipelines,
760 Tapping Machine. Features
760 Tapping Machine Sizes: 3- to 16-inch Model 760C Bulletin No: 1000.006.11 Version: 12.2017 Cross Indexing No: n/a Supersedes: 1000.00610 (06.2015) Model 760C Tapping Machines can be either air or hydraulically
360 Tapping Machine. Description. Features. The basic machine includes:
Sizes: 2- to 6-inch Model 360A and 360B Bulletin No: 1000.004.07 Version: 12.2017 Cross Indexing No: n/a Supersedes: 1000.004.06 (05.2017) Description Tapping machines are used for making connections to
Check Valves DN PN 80, 100, 160
47 DN 300-1000 PN 80, 100, 160 Designed to automatically prevent back flow of working medium, when transmitting non-aggressive natural gas and other non-aggressive media at the temperature ranged -60 C
PIG VALVES NPS 6 20 Class
PIG VALVES NPS 6 20 Class 150-900 APPLICATION Pig valves are designed for loading and receiving cleaning pigs and detecting tools at pipelines transporting: natural gas; oil products. Operating temperature
Model 760B. Features. Options* * For design code options not listed and additional sizes, consult your sales representative.
Sizes: 3 through 16 Bulletin No: 1000.006.00 Date: February 1999 Cross Indexing No: n/a Supersedes: 404 (9/1/89) Tapping Machines can be either air or hydraulically operated andare used for making pipe
860 Tapping Machine. Features
860 Tapping Machine Tapping Sizes: 4- to 20-inches Model 860B Bulletin No: 1000.008.07 Version: 12.2017 Cross Indexing No: n/a Supersedes: 1000.008.06 (8.2016) Split Frame Boring Bar Description Features
Sizes: 3- through 12-inch Model 660b. Features
660 Tapping Machine Sizes: 3- through 12-inch Model 660b Bulletin No: 1000.005.03 Date: April 2011 Cross Indexing No: n/a Supersedes: 1000.005.02 (02/10) Model 660B Tapping Machines can be either air or
Series Direct contact, metal-to-metal seating, make the globe valve ideal for most shut-off applications. Features
Direct contact, metal-to-metal seating, make the globe valve ideal for most shut-off applications. Features General application Designed for ASME boiler and pressure vessel code, section I applications
DRAWING INDEX 1 07/01/2013. Company Project Project Number Location Revision Date
DRAWING INDEX Company Project Project Number Location Revision Date LEGACY OIL & GAS INC. PIERSON PILINE TO EOG 12069 VARIOUS LSD ISSUED FOR APPROVAL January 4, 2013 Drawing No. Client No. Description
Information Sheet for Cam Goggle Line Blind Valve
2013 Information Sheet for Cam Goggle Line Blind Valve Fetterolf Corporation 2021 Cressman Road, Skippack, PA 19474 USA +1 610 584 1500 2 Cam Goggle Valve The Cam-Goggle Valve The Fetterolf Cam Goggle
LINE STOPPING. Extending and modifying your existing pressurized system while it s under full operating conditions.
Extending and modifying your existing pressurized system while it s under full operating conditions. Line Stops are used to temporarily shut down a pipeline system to complete modifications or repairs.
Type B (Extruded Branch) Sizes 4 through 30
STOPPLE Fittings & Reduced Branch Split Tees, Sizes 4-inch and Larger Bulletin No: 1100.001.05 Date: July 2008 Cross Indexing No: n/a Supersedes: 1100.001.04 (07/06) Typical Tapping Setup For Plugging
Type K12. Forged Gate Valve with Pressure Sealed Bonnet Butt-Welded, Flanged DN PN Data Sheet Edition: EN 9 / 2015
PN 63 400 Forged Gate Valve with Pressure Sealed Bonnet Butt-Welded, Flanged Data Sheet Edition: EN 9 / 2015 MPOWER Engineering, a.s. Pod vinicí 2028/20, Modřany, 143 00 Praha 4, CZ T: +420 225 371 300,
PIPELINE INSPECTION SURVEY QUESTIONNAIRE
ARKA PETROGAS PIPELINE PIPELINE INSPECTION SURVEY QUESTIONNAIRE Project: PipeLine Name: ARKALINE Proj. No.:.. Please complete questionnaire as accurate as possible. Phone: +98 21-65611626 Fax: +98 21-65611627
COSASCO TWO-INCH SYSTEM
COSASCO TWO-INCH SYSTEM INSTALLATION, OPERATION, & MAINTENANCE MANUAL SAND PROBES Rohrback Cosasco Systems 11841 East Smith Ave. Santa Fe Springs, CA 90670 Tel: (1) 562-949-0123 Fax: (1) 562-949-3065 E-mail:
DIN Hygienic Union & Fittings
DIN 11851 Hygienic Union & 11852 Fittings The DIN 11851 union is widely used throughout Europe and the Middle East and incorporates a round slotted nut and D Section seal, as standard. The union is manufactured
HOT TAPPING & PLUGGING SOLUTIONS
HOT TAPPING & PLUGGING SOLUTIONS STOPPLE Plus System Combined with a LOCK-O-RING Plus completion plug, the STOPPLE Plus fitting reduces installation time, simplifies the setting process, and eliminates
Contents. Dimensions and weights
G4N Gate Valves Through-conduit, double block-and-bleed slab gate valves with fully protected seat faces for long-lasting, drop-tight shutoff in liquid pipelines Contents General information 3 Standard
VAD Variable Area Desuperheaters
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
technical description:
The steel flanged and welded swing check valves are the pipeline valves, preventing automatically a working medium from the back flow. They are used for: - noncorrosive fluids - water - steam - oil - petroleum
ASME 350 BAR SAE 690 BAR
GENERAL HYDRAULIC PIPES 10-40 BAR SAE 50 BAR SAE 3000 PSI SAE 6000 PSI DIN 350-400 BAR SCHEDULE SERIE SAE 3000 PSI 1 SAE 6000 PSI ASME 350 BAR Product Page GS-ASME s 350 bar 203 SAE 690 bar - Grooving
Annex to the Accreditation Certificate D PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D PL 18438 02 00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 11.03.2014 to 10.03.2019 Holder of certificate: Jürgen
technical description:
The gate valves are used as the closing valves for: - noncorrosive fluids - saturated steam - oil - air - petroleum and petroleum products Operating parameters are in accordance with the standard ASME
DFX Series Liquid Ultrasonic Flow Meters
DFX Series Liquid Ultrasonic Flow Meters The DFX series of ultrasonic flow meters has been designed for high accuracy volume measurement of crude oils and other liquid hydrocarbons. The M&T ultrasonic
TBV Valve Instrument Connection Systems Quality measurement technology, proven close-coupled mounting practices, and integrated hardware for optimal
TBV Valve Instrument Connection Systems Quality measurement technology, proven close-coupled mounting practices, and integrated hardware for optimal transmitter performance Content TBV Valve Instrument
SECTION 1 Grooved Fittings
Anvil offers two different sets of stainless steel fittings. The Gruvlok Series Fittings have full flow designs formed from type 304SS pipe. The Schedule 10 fittings are fabricated from segmentally welded
Supplementary instructions Flanges according to DIN - EN - ASME - JIS - GOST Technical data. Document ID: 31088
Supplementary instructions Flanges according to DIN - EN - ASME - JIS - GOST Technical data Document ID: 10 1 Product description 1 Product description 1.1 Specifications The described flanges are threaded
1 Visit for more details. Contact the Factory at
PACIFIC Fire Protection Solutions for Offshore and Onshore Applications Deluge Pressure Relief Pressure Reducing Level Control Solenoid Control Air Release and Check Valves 1 Visit www.cla-valpacific.com
Model-1 Natural Gas Valves
Flanged End 285 Screwed Weld End Locking Devices KEROTEST Model-1 s Short Weld End Long Weld End Weld x Flange 500 / 740 Flanged End 500 / 740 Weld x Flange 285 Model-1 Short Weld End Standard Welding
Standards Pertaining to Valves Used in the Oil & Gas Industry
PDHonline Course M159 (2 PDH) Standards Pertaining to Valves Used in the Oil & Gas Industry Instructor: Peter Smith, HNC (Mech) 2012 PDH Online PDH Center 5272 Meadow Estates Drive Fairfax, VA 22030-6658
Type K03. Gate Valve Butt-Welded, Flanged DN PN Data Sheet Edition: EN 9 / together we are strong
PN 16 100 Gate Valve Butt-Welded, Flanged Data Sheet Edition: EN 9 / 2015 MPOWER Engineering, a.s. Pod vinicí 2028/20, Modřany, 143 00 Praha 4, CZ T: +420 225 371 300, F: +420 225 371 325 E: info@mpowergroup.eu,
Fisher 9500 Butterfly Control Valve
9500 Product Bulletin Fisher 9500 Butterfly Control The Fisher 9500 butterfly valve is a fully lined valve for use with corrosive fluids and where tight shutoff is required. The nitrile or PTFE liner totally
PETRO VALVES. Gate Globe Check VALVE CATALOGUE. Subsidiary of Petro Power UK
PETRO VALVES Gate Globe Check VALVE CATALOGUE Subsidiary of Petro Power UK 2 PETRO VALVES The company 4 GATE VALVES BOLTED BONNET from Class 150 up to Class 2500 from 2 up to 36 PRESSURE SEAL from Class
Direct contact, metal-to-metal seating, make the gate valve ideal for most shutoff applications. Class 800 ANSI.
Direct contact, metal-to-metal seating, make the gate valve ideal for most shutoff applications. Class 800 ANSI. Features Two inch and smaller valves are available with threaded or socket weld ends as
ANSI Valve Standards. API Valve Standards
ANSI Valve s ANSI - the American National s Institute standardization and conformity assessment system. Code Name ANSI A126 ANSI A181 ANSI 816.10 ANSI 816.34 ANSI 8127.1 Grey iron castings for valves flanges
Distributed by: M&M Control Service, Inc brands you trust.
Distributed by: M&M Control Service, Inc. /stockham.php 800-876-0036 847-356-0566 brands you trust. STOCKHAM - Cast Valves Contents Performance in Any Application...4 How to Specify and Order Valves...4
SECTION FACILITY FUEL OIL PIPING
PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Specification Sections, apply to this Section. B. Related Sections:
CHECK VALVES. Bolted Bonnet - Full Opening - Pressure Seal - Wafer Dual Plate, Single Plate & Tilting Disc.
A Long Experience in Energy Equipment and one Goal: The Customer s satisfaction. CHECK VALVES Bolted Bonnet - Full Opening - Pressure Seal - Wafer Dual Plate, Single Plate & Tilting Disc. Swing Check Valves
MSA, a.s., is an important manufacturer of industrial valves from the Czech Republic, Europe. The company manufactures and sells wide range of
API Program MSA, a.s., is an important manufacturer of industrial valves from the Czech Republic, Europe. The company manufactures and sells wide range of industrial valves for transport and processing
AN ISO 9001 : 2008 COMPANY SWING CHECK VALVE. Get the edge in process control. Butterfly Valves India Pvt. Ltd.
N ISO 9001 : 2008 COMPNY SWING CHECK VLVE Get the edge in process control utterfly Valves India Pvt. Ltd. Introduction Hi-TECH Manufacturing Programme Valve Type End SME 2 2½ 3 4 5 6 8 10 12 14 16 18 20
PIGGING PRODUCTS. Capex supply. PIG LAUNCHER and RECEIVER
PIGGING PRODUCTS Capex supply PIG LAUNCHER and RECEIVER Before Cleaning After Cleaning TYPES OF PIGS DISPLACEMENT AND BATCHING PIGS AND PIG WITH BLADES (FOR CLEANING) 2 to 6 3 and 4 PIG with blades 5 to
Rate B standard. Rate A Rate A option. max +260 C/ min -40 C
of carbon steel 315 -series C ont R o L Description Edition 30-03-2015 The welded butterfly valve 315 is used for example in district heating, district cooling and industry. It can be used as an on-off
Dual Plate Check Valves
ORION STEEL VALVES Dual Plate Check Valves API 594 DUAL PLATE DUAL PLATE WAFER CHECK VALVES API 594 - p. 84 Class ASME 150 (PN 20) 300 (PN 50) 600 (PN 100) 900 (PN 150) 1500 (PN 250) 2500 (PN 420) DUAL
GWC Italia. Proven technology for individual valve solutions worldwide API 6D SWING CHECK VALVES SC-1002
GWC Italia Proven technology for individual valve solutions worldwide API 6D SWING CHECK VALVES SC-1002 GWC ITALIA Proven technology for individual valve solutions worldwide GWC Italia Worldwide Network
Valve Portfolio by Function
Valve Portfolio Valve Portfolio by Function Valves for Isolation 1) IsoPlug Lift Plug Valve 2) Y Globe Valve 3) HP Angle Isolation Valve 4) Special Gate Valve Choke Valves 5) Choke valves Control Valves
Cast Steel Valves. Contents Contents. Figure Number Index. Figure Number Cross Reference. Valve Type Class Stockham Jenkins
Stockham Cast Valves Cast Valves Contents Contents Performance in Any Application...4 How to Specify and Order Valves...4 Installation, Marking and Identification...5 Gate Valves...6 Globe Valves...11
HANCOCK 600 GATE, GLOBE AND CHECK VALVES FORGED STEEL
HANCOCK 600 GATE, GLOBE AND CHECK VALVES A range of ASME class 800 and 1500 reduced bore forged steel valves with screwed, socket weld, butt weld or flanged ends GATE VALVES A compact but extremely sturdy
Direct contact, metal-to-metal seating, make the gate valve ideal for most shut-off applications. Class 800 ANSI.
Direct contact, metal-to-metal seating, make the gate valve ideal for most shut-off applications. Class 800 ANSI. Features Two inch and smaller valves are available with threaded or socket weld ends as
TRUNNION MOUNTED BALL VALVES
TRUNNION MOUNTED BALL VALVES COMPANY PROFILE The company ARMATURY Group a.s. is a leading Czech manufacturer and distributor of industrial valves, fittings and control systems for valves. The annual production
Power-Seal High Performance Butterfly Valve: Series P1 Installation & Maintenance Manual
CAUTION: 1. For your safety read this manual completely before installation or servicing. 2. Before installing or servicing, please ensure the line pressure has been relieved, and any hazardous fluids
Valve Portfolio. Slide 0
Valve Portfolio Slide 0 Valve Portfolio by Function Valves for Isolation 1) IsoPlug Lift Plug Valve 2) Y-Globe Valve 3) HP Angle Isolation Valve 4) Special Gate Valve Choke Valves 5) Choke valves Control
BS up.v.c PRESSURE PIPE FITTINGS
BS Equal Elbow 90 Faucet Elbow 90 Equal Tee Reducing Tee To solvent weld to pipes at both end. L A B Dia. d (Gram) ½ 1 5mm 16.5 17.4 16.5 21.50mm 20 ¾ 2 0mm 19.5 19.6 18.8 26.90mm 45 1 25m m 25.5 21.9
Pipeline Equipment. HEROchem ek Friedensstr. 15 D Kehl/Rh. Tel.: Fax:
Pipeline Equipment HEROchem ek Friedensstr. 15 D-77694 Kehl/Rh. Tel.: +49 7851 48.11.55 Fax: +49 7851 95.97.63 info@herochem2000.com OVERVIEW Pig Traps Quick closure Insulating Joints Tees Split Tees Gate
UP TO 20,000 BPH (500 METRIC TONS PER HOUR)* *capacities are subject to product and product condition
BUCKET ELEVATORS NORSTAR BUCKET ELEVATORS CUSTOM DESIGN Norstar Bucket Elevators are designed to provide you with maximum throughput and long lasting performance for a wide variety of bulk material handling
FLANGE. Flanges used for
FLANGE FLANGE Flanges with rating class designations 150, 300, 400, 600, 900, 1500, and 2500 in sizes NPS 1 2 through NPS 24 ASME B16.5: Pipe Flanges and Flanged Fittings (NPS 24 ) ASME B16.47: NPS 26
Cast Steel Valves. General Index. Figure Number Index -1-
Cast Valves General Index Cast Valves Ordering Information... 2 General Data... 3 Materials... 4 Identification... 5 General Features... 6 Gate Valve Features... 7 NACE Trim Valves...11 Globe Valve Features...12
Security device Non return valve
Non return valve Design The DEFINOX non-return valve is made of 316L stainless steel with a surface finish of Ra = 0.8 µm. To disassemble, a fitting is required upstream. This valve uses a guided plug
SECTION GENERAL-DUTY VALVES FOR PLUMBING PIPING
SECTION 220523 - GENERAL-DUTY VALVES FOR PLUMBING PIPING PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division
GWC Italia. Proven technology for individual valve solutions worldwide NGV-1002
GWC Italia Proven technology for individual valve solutions worldwide needle valves gauge valves NGV-1002 GWC ITALIA Proven technology for individual valve solutions worldwide GWC Italia Worldwide Network
H i g h P r e s s u r e V a l v e
High Pressure Valve HIGH PRESSURE VALVES Applications & Specifications Range Gate Valve Advantages STRACK has designed and manufactured high pressure valves for over 35 years. Currently more than 3000
SECTION GENERAL-DUTY VALVES FOR HVAC. A. Section includes valves for building services piping.
SECTION 23 05 23 GENERAL-DUTY VALVES FOR HVAC PART 1 - GENERAL 1.1 SUMMARY A. Section includes valves for building services piping. 1.2 REFERENCES A. AGA Z21.22 (American Gas Association) - Relief Valves
HS VALVE HS VALVE CO., LTD.
HS VALVE HS VALVE CO., LTD. GREETING HS Valve co., ltd. was funded in 1987 with a mandate to become a world class manufactured of Ball, gate, globe & check Valve to meet the high standards of the Oil and
The globe valves are used as a closing valve for: - noncorrosive fluids - saturated steam
The globe valves are used as a closing valve for: - noncorrosive fluids - saturated steam - oil - air - petroleum and petroleum products The Characteristics of working conditions: pressure dependency on
Quality, Safety and Environment
Quality, Safety and Environment Global Valve Center B.V. is an independent, internationally operating, modern, flexible and service-oriented organization with over forty years of experience and expertise
The excellent performance of the pressure seal type range, is optimal in high pressure and high temperature applications.
The excellent performance of the pressure seal type range, is optimal in high pressure and high temperature applications. Features Swing check valves can fit on both horizontal and vertical (up-flow) piping.
Type 441 XXL 442 XXL. Facts. Flanged Safety Relief Valves spring loaded. The-Safety-Valve.com. Metric Units LWN E
Type 441 442 Flanged Safety Relief Valves spring loaded Metric Units Facts The-Safety-Valve.com LWN 462.07-E Conventional design 40 Bolted Cap H1 18 Adjusting screw 19 Lock nut 69 Needle bearing 16 Upper
THE STANDARD IN NON- STANDARD VALVES
THE STANDARD IN NON- STANDARD THE STANDARD IN NON- STANDARD 1954 Founding of Merwede valves & fittings as a business unit from shipyard De Merwede 1986 Extra warehouse put in use 1978 Production from (forged)
A. American National Standards Institute: 1. ANSI Z Relief Valves for Hot Water Supply Systems.
SECTION 220523 - PLUMBING VALVES PART 1 - GENERAL 1.1 SUMMARY A. Section Includes: 1. Ball valves. 2. Butterfly valves. 3. Swing check valves. 4. Spring loaded check valves. 5. Water pressure reducing
OIL & GAS INDEX 1- CAPABILITIES 2- ENGINEERING SERVICES 3- PRODUCTS: 3b- SYSTEMS. 3a- MAXIMIZING TECHNOLOGY. 3c- INSTRUMENTATION
INDEX 1- CAPABILITIES 2- ENGINEERING SERVICES 3- PRODUCTS: 3a- MAXIMIZING TECHNOLOGY 3a.1- Oil & Gas HP Valves / Control Valves 3a.2- Oil & Gas Special flanges, pipes & accessories 3a.3- Custody Transfer
Series Direct contact and metal-to-metal seating makes the T-pattern globe stop valve ideal for most shut-off applications.
7 YARWAY Hancock T-Pattern Globe valves Direct contact and metal-to-metal seating makes the T-pattern globe stop valve ideal for most shut-off applications Features Heavy integral stellite hardfacing on
ANSI GATE, GLOBE AND CHECK VALVES & STRAINERS
ANSI GATE, GLOBE AND CHECK VALVES & STRAINERS INDEX 2 8 16 20 32 36 44 50 54 58 62 66 78 THE COMPANY CAST GATE VALVES CAST GATE VALVES PRESSURE SEAL CAST GLOBE VALVES CAST GLOBE VALVES PRESSURE SEAL CAST
T-Bar Bonnet. Monoflanges STANDARD OPTIONS. O.S.&Y. Bonnet (firesafe) Gas Solution Bonnet. Anti-Tamper Bonnet
T-Bar Bonnet Gas Solution bonnet with non-rotating Metal Stem Tip The Gas Solution bonnet protects the internal and external threads. Moreover, the bonnet thread is less subject to wear, since it is not
Fabricated Tee Strainers Style T & TQ; 150#, 300# and 600# Flanged or Butt Weld Connections...6 Technical Data...7
07/1 Fabricated Strainers Fabricated Y Strainers Style FSA & FSSA; 10#, 00# and 600# Flanged or Butt Weld Connections... Technical Data... Style FSA & FSSA; 900#, 100# and 00# Flanged or Butt Weld Connections...*
Triple-offset Butterfly Valves
Triple-offset Butterfly Valves ASME Class 150 to 1500 3 to 100 (80 mm to 2500 mm) API 609 L&T Valves Triple-offset Butterfly Valves L&T Valves is a wholly owned subsidiary of Larsen & Toubro. Backed by
FULLY WELDED BALL VALVES
FULLY WELDED BALL VALVES 2 PERFORMANCE FROM START TO FINISH Ensuring the safety of the entire pipeline system requires the valves for oil and gas applications to be able to meet the most challenging demands.
Distributed By: M&M Control Service, Inc
Fabricated Strainers Fabricated Y Strainers Style FSA & FSSA; 150#, 300# and 600# Flanged or Butt Weld Connections...2 Technical Data...3 Style FSA & FSSA; 900#, 1500# and 2500# Flanged or Butt Weld Connections...*
Oilman Group API 6A PRODUCTS OILMAN GROUP LTD. Shanghai Houston
API 6A PRODUCTS OILMAN GROUP LTD 1 BOMCO Guanghan Drilling & Production Equipment Factory is a subsidiary of CNPC and provides the best API 6A & 16A products to esteemed customers all over the world. 2
SECTION GENERAL-DUTY VALVES FOR PLUMBING PIPING
SUNY GENESEO 220523-1 PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections, apply
GALLI&CASSINA. Plug Valves. Conical
Conical Plug Pressure Balanced Type UPPER HOLE LOWER HOLE The Pressure Balanced Plug Contains 2 Holes: The Upper Holes Connects the Plug Port with the Area Above Plug. The Lower hole Maintains Pressure
Cast Steel Valves. General Index. Figure Number Index JENKINS -1-
Cast Valves Cast Valves SINCE 1864 General Index General Data... 2 Materials... 2 Identification... 3 Gate Valve Features... 4, 5 Globe Valve Features... 9, 10 Swing Check Valve Features... 14, 15 Pressure/Temperature
EEMUA Discontinued Publications 17 th April 2018
EEMUA Discontinued Publications 17 th April 2018 Please see below a list publications no longer actively published by EEMUA with an explanation where relevant. Previous editions of EEMUA publications may
16 bar standard 25 bar - option Tightness class ISO 5208, EN Standard - RATE B, Option RATE A RATE A. 16 bar standard 25 bar - option
Operation WAFER TYPE stainless steel C ont R o L Description Edition Wafer type butterfly valve is an on-off and control valve for demanding industrial pipelines. The valve is tight to both directions
Series MRK and MRM For nominal pressures up to 640 bar /class 4500 Automatic Recirculation Valve for pump protection
Series MRK and MRM For nominal pressures up to 640 bar /class 4500 Automatic Recirculation Valve for pump protection Series MRK and MRM The ultimate high pressure SCHROEDAHL Automatic Recirculation Valve,
FULLY WELDED BALL VALVES
FULLY WELDED BALL VALVES 2 PERFORMANCE FROM START TO FINISH Ensuring the safety of the entire pipeline system requires the valves for oil and gas applications to be able to meet the most challenging demands.
BYPASS ROTAMETERS FOR MEASURING RATE OF FLOW IN LARGE PIPELINES
BULLETIN 20-5100-68 BYPASS FOR MEASURING RATE OF FLOW IN LARGE PIPELINES BYPASS ROTOMETERS SK bypass Rotameter systems are designed for the accurate measurement of fluid rate of flow in pipelines 11/2
Fully Welded Ball Valves
Fully Welded Ball Valves Company s Profile Established:... 1956, family owned company Managing Director: Dr. Ing. Thomas Böhmer Employees:... 300 Annual Turnover:... 60 Mill. EUR Production Area:... 269000
ASME B31.3 Process Piping
ASME B31.3 Process Piping Charles Becht IV, PhD, PE Don Frikken, PE Instructors BECHT ENGINEERING COMPANY, INC. In-Service Piping - 1 API 570 Piping Inspection Code Responsibilities What to Inspect Types
R o L. BUTTERFLY VALVE of carbon steel with welded ends 313 -series BLUE LINE. Description
of carbon steel 313 -series C ont R o L Description Edition 23-07-2015 The welded butterfly valve 313 is specially designed for district heating and district cooling. It can be used as an on-off or control
STANDARDS and SPECIFICATIONS
ANSI (American National Standards Institute) ANSI B31.4 - Liquid petroleum transportation piping system. ANSI B31.4 - Gas transmission and distribution piping system. API (American Petroleum Institute)
CASES OF THE B16 VALVE, FLANGES, FITTINGS AND GASKETS STANDARDS. Approval Date: December 16, 2013
Approval Date: December 16, 2013 Cases will remain available for use until annulled by the applicable Standards Committee B16 Case 1 High Strength/High Temperature Material ASME B16.34 Group 3 Valves ASME
TABLE OF CONTENTS CONCENTRIC TYPE 9 HIGH PERFORMANCE 21 TRIPLE OFFSET 31 SPECIAL BUTTERFLY VALVE 67 TECHNICAL FEATURES 73
BUTTERFLY VALVES The information in this catalog is correct except for error or omission and could be changed without notice. Ref.: BUTTERFLY-202014 TABLE OF CONTENTS CONCENTRIC TYPE 9 HIGH PERFORMANCE
Annex of the Certificate (Page 1/5) Scope of Accreditation
Annex of the Certificate (Page 1/5) As a "Type A" Inspection Body Address : Esas Maltepe Ofispark Altayçeşme Mah. Çamlı Sokak No:21 Kat:8 Maltepe 34843 İSTANBUL/TÜRKİYE Phone : +90 216 518 40 50 Fax :
ASBESTOS/NON-ASBESTOS GASKET Style No:TFG. The Flat Gaskets are the most typical ones from the family of flat static gaskets
ASBESTOS/NON-ASBESTOS GASKET Style No:TFG The Flat Gaskets are the most typical ones from the family of flat static gaskets They are used in a large number by various industries and in a variety of applications
COMPLETE REVISION December Piping
December 2015 Piping Piping Material Specification 3SA0J01 Class 300, 304/304L Stainless Steel, Jacketed Construction, 0.000 C.A. Core: Process Jacket: Steam PURPOSE AND USE OF PROCESS INDUSTRY PRACTICES