High-Pressure Pipeline Equipment
|
|
- Cleopatra Booth
- 5 years ago
- Views:
Transcription
1 BROCHURE
2 High-Pressure Pipeline Equipment High-Pressure Gate Valves PRODUCTS 3 Our standard and customised High-Pressure Gate Valves, compatible with the market pipeline equipment, are designed and manufactured by highly qualified engineers and can be used with the Fittings, Holing and FlowStopper Machines in order to meet our customers specific needs. Our High-Pressure Gate Valves are intended to be used with pipelines from 12 up to 68 inches, supplied to match ASME Class from 150 to They are available for operating pressures of up to 250 bar, and can be operated either manually or hydraulically. The valves are bidirectional, and thus can function in parallel or perpendicular orientation. In comparison with conventional valves, the new generation of High-Pressure Gate Valves requires less frequent maintenance, and has a significantly increased lifetime due to a 70% reduction of wear and internal stresses. Our valves significantly reduce the risk of leaks and, due to their design, they are much more convenient in terms of weight and size. All our valves include positive shut-off, integral flange studs, and a built-in pressure equalizing valve.
3 FlowStopper Machines Holing Machines PRODUCTS 5 FlowStopper Machines serve to isolate a section of a pipeline without interrupting the flow of gas, and consist of three main parts: a stopper, a shelter, and a hydraulic cylinder. This technology is used after the bypass installation and the drilling operation for pipeline and valve maintenance, replacement, repairs, and tie-in of additional lines. Carrying out these activities without interruptions and under operating pressure, we avoid the disruption of the product flow, thus significantly reducing the operator s costs and timescales. hydraulically operated FlowStopper Machines can be customised to the special needs of each operation. Our FlowStopper Machines are available for pipeline internal nominal diameter (INT.DN) from 12 inches up to 68 inches and under an operating pressure of up to 250 bar at 60 C. The maximum operating temperature of our FlowStopper Machines is 110 C. Holing Machines are used to perform drilling under pressure for pipeline and valve maintenance, replacement, repairs, and tie-in of additional lines. Carrying out these activities without shutdowns and under working pressure, we avoid the disruption of the product flow, and as a consequence, significantly reduce the operator s costs and timescales. offers hydraulically operated Holing Machines for various materials, such as steel, cast iron, stainless steel, cement, carbon, copper, brass, and polyethylene, with an internal nominal diameter (INT.ND) from 12 up to 68 inches, and under an operating pressure of up to 250 bar at 60 C without interruption of flow. Our Holing Machines maximum operating temperature is 110 C. We provide a new generation of interchangeable cutting inserts, adaptable to the temperature and pressure requirements of specific pipe operations. Additionally, we offer equipment that can be customised for the special needs of each operation. These technologies can be used in the preparation stage for FlowStopper Machine operations. In compliance with our environmental policy, we ensure no pipe content is released to the atmosphere during drilling operations performed with our machines.
4 Fittings PRODUCTS 7 provides a wide variety of standard and customised Fittings from 12 to 68 inches, engineered to complement our Holing and FlowStopper Machines. Our Fittings are also compatible with the marketstandard pipeline equipment. We manufacture Split or Multidirectional Tees, Nozzles or Multidirectional Nozzles, and Sleeves matching ASME Class from 150 to 1500 and available for operating pressures up to 250 bar. Our Fitting welding are 100% radiographically and ultrasonically inspected. Split and Multidirectional Tees BRUVAL standard and customised Split and Multidirectional Tees, operating with standard or non-standard Flanges, are used to fix the BRUVAL High-Pressure Gate Valve, allowing to carry out repair activities, maintenance or installation of bypasses without pipeline shutdown. Nozzles and Multidirectional Nozzles BRUVAL Nozzles and Multidirectional Nozzles, are used for both pipeline constructions and deviation installations. We manufacture standard and customised Nozzles to meet your project specific needs. We provide fittings up to 68 inches. Sleeves BRUVAL Sleeves are used in pipeline maintenance and construction. We offer both standard and customised Sleeves to meet your project specific needs. Multidirectional Nozzle Multidirectional Tee Split Tee Nozzle Sleeve
5 Blank Flanges Lock Discs PRODUCTS 9 provides high-pressure standard and customised Blank Flanges up to ASME Class 1500, from 12 to 68 inches, which are available for pressures of up to 250 bar. Our Flanges are available in all steel metal grades. Usually welded or screwed to the pipeline and connected with bolts, Blank Flanges are used to strengthen the support, during FlowStopping operations, and to implement the insertion of more pipeline items. Blind Flanges provides high-pressure standard and customised Blind Flanges up to ASME Class 1500, from 12 to 68 inches, which are available for pressures of up to 250 bar. Our Flanges are available in all steel metal grades. Blind Flanges are used to seal the end of a pipeline system for permanent or temporary application, and are typically provided with a RTJ (Ring Type Joint) face, raised face, or flat face. offers high-pressure standard and customised Lock Discs, withstanding operating pressures of up to 250 bar, for pipe diameters from 12 up to 68 inches, and with ASME Class from 150 to 1500 flanges. The Lock Disc is used with the Blind Flange in order to eliminate the permanent need for a valve after a FlowStopping operation. If a new pipe connection is needed, a valve can be installed on the Fitting, and the Lock Disc removed with a Holing Machine.
6 Product Scheme PRODUCTS 11 Holing Machine FlowStopper Machine BYPASS PIPELINE Shelter Shelter High-Pressure Gate Valve High-Pressure Gate Valve Cutter Split Tee Split Tee Pilot Drill Flow Stopper Holing Machines offers hydraulically operated Holing Machines for various materials, such as steel, cast iron, stainless steel, cement, carbon, copper, brass, and polyethylene, with an internal nominal diameter (INT. ND) from 12 up to 68 inches, and under an operating pressure of up to 250 bar at 60 C without interruption of flow. High-Pressure Gate Valves Our High-Pressure Gate Valves are intended to be used with pipelines from 12 up to 68 inches, supplied to match ASME Class from 150 to They are available for operating pressures of up to 250 bar, and can be operated either manually or hydraulically. The valves are bidirectional, and thus can function in parallel or perpendicular orientation. FlowStopper Machines hydraulically operated FlowStopper Machines can be customised to the special needs of each operation. Our FlowStopper Machines are available for pipeline internal nominal diameter (INT.DN) from 12 inches up to 68 inches and under an operating pressure of up to 250 bar at 60 C. The maximum operating temperature of our FlowStopper Machines Fittings provides a wide variety of standard and customised Fittings from 12 to 68 inches, engineered to complement our Holing and FlowStopper Machines. Our Fittings are also compatible with the market-standard pipeline equipment. is 110 C.
7 BRIEF About Us BRUVAL is a manufacturer of pipeline maintenance equipment and specializes in producing both customized and standard equipment for pipeline installations. Products and Services We design and manufacture Holing and FlowStopper Machines, Fittings, High-Pressure Gate Valves, Flanges and Lock Discs for tie-in of additional lines, maintenance operations and repair work. Engineering and Production We focus our efforts to provide efficient and optimal mechanical solutions through expert evaluations. BRUVAL ensures a safe product development consistently exceeding industrial standards in order to bring your projects into reality. To make sure that each mechanical device, project and repair solution or upgrade meets all your criteria and specific requirements, we perform all the stages of feasibility study, cost optimization, design & 3D modeling, strength calculations and product testing. BROCHURE EN
Split Tees BRUVAL. Description. Sizes: 12 up to 68 inches. We provide fittings up to 68 inches.
BRUVAL Split Tees Sizes: 12 up to 68 inches TECHNICAL SPECIFICATION 2016.07.0001 We provide fittings up to 68 inches. Description BRUVAL provides a wide variety of standard and customised Fittings from
More informationLINE STOPPING. Extending and modifying your existing pressurized system while it s under full operating conditions.
Extending and modifying your existing pressurized system while it s under full operating conditions. Line Stops are used to temporarily shut down a pipeline system to complete modifications or repairs.
More informationLine Blank Specification
1.0 Purpose Line Blank Specification Page 1 of 14 1.1 This document provides specifications for line blanks (a.k.a. slip blanks, pancakes, paddle blanks) NPS 1/2 through NPS 24 up through Class 1500 and
More information860 Tapping Machine. Features
860 Tapping Machine Sizes: 4- through 20-inch Model 860b Bulletin No: 1000.008.05 Date: April 2010 Cross Indexing No: n/a Supersedes: 1000.008.04 (11/08) Typical Tapping Setup 860 Tapping Machine Split
More information660 Tapping Machine. Features
660 Tapping Machine Sizes: 3- to12-inch Model 660C Bulletin No: 1000.005.06 Version: 07.2015 Cross Indexing No: n/a Supersedes: 1000.005.05 (06.2015) Model 660C Tapping Machines can be either air or hydraulically
More informationSeries Direct contact, metal-to-metal seating, make the globe valve ideal for most shut-off applications. Features
Direct contact, metal-to-metal seating, make the globe valve ideal for most shut-off applications. Features General application Designed for ASME boiler and pressure vessel code, section I applications
More information760 Tapping Machine. Features. The basic machine includes: Lower-in crank Measuring rod Retainer rod pusher Ring gasket
760 Tapping Machine Sizes: 3- to 16-inch Model 760C Bulletin No: 1000.006.08 Version: 07.2015 Cross Indexing No: n/a Supersedes: 1000.006.07 (06.2015) Model 760C Tapping Machines can be either air or hydraulically
More informationFisher 9500 Butterfly Control Valve
9500 Product Bulletin Fisher 9500 Butterfly Control The Fisher 9500 butterfly valve is a fully lined valve for use with corrosive fluids and where tight shutoff is required. The nitrile or PTFE liner totally
More informationType 441 XXL 442 XXL. Facts. Flanged Safety Relief Valves spring loaded. The-Safety-Valve.com. Metric Units LWN E
Type 441 442 Flanged Safety Relief Valves spring loaded Metric Units Facts The-Safety-Valve.com LWN 462.07-E Conventional design 40 Bolted Cap H1 18 Adjusting screw 19 Lock nut 69 Needle bearing 16 Upper
More informationVALVE INSERTION WHEN YOU ARE UNDER PRESSURE TO INSTALL A VALVE IN AN OPERATING LINE VALVE INSERTION PAGE QV-2
www.romac.com 1-800-426-9341 WHEN YOU RE UNDER PRESSURE TO INSTLL VLVE IN N OPERTING LINE PGE QV-2 4", 6" or 8" installations in cast iron, ductile iron, /C and some classes of PVC pipe Uses modern resilient
More informationHOT TAPPING & PLUGGING SOLUTIONS
HOT TAPPING & PLUGGING SOLUTIONS STOPPLE Plus System Combined with a LOCK-O-RING Plus completion plug, the STOPPLE Plus fitting reduces installation time, simplifies the setting process, and eliminates
More informationSTOPPLE Plus Fittings
STOPPLE Plus Fittings Sizes: 4- Through 36-inch Bulletin No: 1100.007.02 Version: 08.2014 Cross Indexing No: n/a Supercedes: 1100.007.01 (06.2014) Offset in closeup Options Description STOPPLE Plus fittings
More informationYARWAY HANCOCK Y-PATTERN FORGED STEEL GLOBE STOP VALVES SERIES 4000
Direct contact and metal-to-metal seating make this Y-pattern globe stop valve ideal for most shut-off applications. FEATURES All valves feature integral Stellite hardfacing on both body and disc seating
More information360 Tapping Machine. Description
Sizes: 2- to 6-inch Model 360B Bulletin No: 1000.004.08 Version: 06.2018 Cross Indexing No: n/a Supersedes: 1000.004.07 (12.2017) Description Tapping machines are used for making connections to pipelines,
More informationTOTAL PIPING SOLUTIONS, INC. TRIPLE-TAP
TOTAL PIPING SOLUTIONS, INC. TRIPLE-TAP Extended Range Stainless Steel Push Plug Line Stop Tapping Sleeve Technical Specifications Controlled Document: ENGTS-05/120417 December 2017 TRIPLE TAP Extended
More informationFLANGE. Flanges used for
FLANGE FLANGE Flanges with rating class designations 150, 300, 400, 600, 900, 1500, and 2500 in sizes NPS 1 2 through NPS 24 ASME B16.5: Pipe Flanges and Flanged Fittings (NPS 24 ) ASME B16.47: NPS 26
More information860 Tapping Machine. Features
860 Tapping Machine Tapping Sizes: 4- to 20-inches Model 860B Bulletin No: 1000.008.07 Version: 12.2017 Cross Indexing No: n/a Supersedes: 1000.008.06 (8.2016) Split Frame Boring Bar Description Features
More information760 Tapping Machine. Features
760 Tapping Machine Sizes: 3- to 16-inch Model 760C Bulletin No: 1000.006.11 Version: 12.2017 Cross Indexing No: n/a Supersedes: 1000.00610 (06.2015) Model 760C Tapping Machines can be either air or hydraulically
More informationPRESSURE RELIEF / SURGE ANTICIPATOR CONTROL VALVE
PROJECT NAME LOCATION PRESSURE RELIEF / SURGE ANTICIPATOR CONTROL VALVE INTRODUCTION This specification covers the design, manufacture, and testing of 2-1/2 in. (65 mm) through 18 in. (450 mm) Control
More information360 Tapping Machine. Description. Features. The basic machine includes:
Sizes: 2- to 6-inch Model 360A and 360B Bulletin No: 1000.004.07 Version: 12.2017 Cross Indexing No: n/a Supersedes: 1000.004.06 (05.2017) Description Tapping machines are used for making connections to
More informationSeries Direct contact and metal-to-metal seating makes the T-pattern globe stop valve ideal for most shut-off applications.
7 YARWAY Hancock T-Pattern Globe valves Direct contact and metal-to-metal seating makes the T-pattern globe stop valve ideal for most shut-off applications Features Heavy integral stellite hardfacing on
More informationKeystone knife gate valves Figure OS1700
Bi-directional zero leakage ASME Class 150 rated knife gate valve. Designed for the rigors of high pressure slurry and oil sands applications Features General application The OS1700 has many features to
More informationFLOAT CONTROL VALVES
PROJECT NAME LOCATION FLOAT CONTROL VALVES INTRODUCTION This specification covers the design, manufacture, and testing of 8 in. (200 mm) through 36 in. (900 mm) Control Valves PART 1 - GENERAL 1. Standard
More informationPRESSURE RELIEF / SUSTAINING CONTROL VALVES
PROJECT NAME LOCATION PRESSURE RELIEF / SUSTAINING CONTROL VALVES INTRODUCTION This specification covers the design, manufacture, and testing of 1 in. (25 mm) through 36 in. (900 mm) Control Valves PART
More informationPRECISION UK Ltd. Medical Gas Outlet BS Standard
Contents Page Section No. Product Description General 1 First Fix Assembly 1.2 Check Valve Assembly 1.3 Second Fix Assembly 1.4 Operation General 2 Probe Connection/Disconnection 2.2 Safety General 3 Installation
More informationMercy Hospital of Buffalo Catholic Health System 2 nd Floor Patient Holding Center 3 rd Floor Locker Rooms Shaflucas Architects, PC Project No.
SECTION 23 22 13 STEAM AND CONDENSATE PIPING PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of Contract, including General and Supplementary Conditions and Division 1 Specification
More informationSERVICE AND REPAIR. On-Site Services Repairs, Overhauls & Upgrades Drop in Replacement Gearboxes Asset Management
Product Brochure SERVICE AND REPAIR Radicon service engineers are ready and waiting 24 hours a day, 365 days a year, to provide the following services anytime, anywhere in the world. On-Site Services Repairs,
More informationType 441 DIN 442 DIN. Facts. Flanged Safety Relief Valves spring loaded. The-Safety-Valve.com. US Units
Type 441 DIN 442 DIN Flanged Safety Relief Valves spring loaded US Units Facts The-Safety-Valve.com LWN 462.02-E 462.01-D Conventional design 40 Cap H2 18 Adjusting screw 19 Lock nut 16 Upper spring plate
More informationALTITUDE CONTROL VALVES FOR ONE WAY FLOW
PROJECT NAME LOCATION ALTITUDE CONTROL VALVES FOR ONE WAY FLOW INTRODUCTION This specification covers the design, manufacture, and testing of 2 in. (50 mm) through 36 in. (900 mm) Control Valves PART 1
More informationModel 760B. Features. Options* * For design code options not listed and additional sizes, consult your sales representative.
Sizes: 3 through 16 Bulletin No: 1000.006.00 Date: February 1999 Cross Indexing No: n/a Supersedes: 404 (9/1/89) Tapping Machines can be either air or hydraulically operated andare used for making pipe
More informationAN ISO 9001 : 2008 COMPANY SWING CHECK VALVE. Get the edge in process control. Butterfly Valves India Pvt. Ltd.
N ISO 9001 : 2008 COMPNY SWING CHECK VLVE Get the edge in process control utterfly Valves India Pvt. Ltd. Introduction Hi-TECH Manufacturing Programme Valve Type End SME 2 2½ 3 4 5 6 8 10 12 14 16 18 20
More informationPRESSURE REDUCING CONTROL VALVES
PROJECT NAME LOCATION PRESSURE REDUCING CONTROL VALVES INTRODUCTION This specification covers the design, manufacture, and testing of 1 in. (25 mm) through 36 in. (900 mm) Control Valves PART 1 - GENERAL
More informationSuggested Specifications
ISO 9001 Certified Suggested Specifications The Milliken criteria of quality, reliability, safety and value are embodied in the Millcentric Eccentric valve, setting higher standards for dependable performance
More informationVAD Variable Area Desuperheaters
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
More informationSECTION COMMON WORK RESULTS FOR FIRE SUPPRESSION. A. Pipe, fittings, valves, and connections for sprinkler systems.
SECTION 210500 - COMMON WORK RESULTS FOR FIRE SUPPRESSION PART 1 GENERAL 1.1 SECTION INCLUDES A. Pipe, fittings, valves, and connections for sprinkler systems. 1.2 RELATED REQUIREMENTS A. Section 099000
More informationTransportation Products
Transportation Products Butterfly Valves Hopper Tees Actuators Accessories A Name You ve Trusted for Years... Resilient Seated Butterfly Valves 400 & 480 Series 1 Piece Body Design This economical, resilient
More informationMILLCENTRIC FULL/100% POR T ECCENTRIC PLUG VALVE
ISO 9001 CERTIFIED MILLCENTRIC FULL/100% POR T ECCENTRIC PLUG VALVE Suggested Specifications The Milliken criteria of quality, reliability, safety and value are embodied in the Millcentric Eccentric valve,
More informationThe EZ Valve Process. Advanced Valve Technologies delivers
The EZ Valve Process The EZ Valve system was developed to provide important performance and installation benefits to professionals working under difficult conditions and with critical needs. Advanced Valve
More informationAdvantages of Grooved Fittings
Grooved Fittings Advantages of Grooved Fittings Comparative Advantages Allows angular deflection-misalignment Expansion, contraction or, no need for expansion joint Reclaimable, no need for union Allows
More informationGate Valve (Model 1000)
Gate Valve (Model 1000) s: - 2 to 24 (50mm to 600mm) Rating: - Class 150 to Class 2500 Cast Steel Valves Flange End But-Weld End Information:- www.invacovalves.com sandesh@invacovalves.com invacovalves@gmail.com
More informationSOLENOID CONTROL VALVE
PROJECT NAME LOCATION SOLENOID CONTROL VALVE INTRODUCTION This specification covers the design, manufacture, and testing of 4 in. (100 mm) through 36 in. (900 mm) Control Valves PART 1 - GENERAL 1. Standard
More informationSealing Technologies & Solutions
Sealing Technologies & Solutions Save weight, space, time and money! High Integrity Sealing Vector Techlok Clamp Connector A radially-bolted mechanical pipe connection which allows quick make-up and break-out
More informationPressure Relief Valve Maintenance Manual
Technical Manual 1098T Pressure Relief Valve Maintenance Manual Farris Engineering Division of Curtiss-Wright Flow Control Corporation TABLE OF CONTENTS - Manual Revision 0 Introduction & Safety Tips...
More informationFabricated Tee Strainers Style T & TQ; 150#, 300# and 600# Flanged or Butt Weld Connections...6 Technical Data...7
07/1 Fabricated Strainers Fabricated Y Strainers Style FSA & FSSA; 10#, 00# and 600# Flanged or Butt Weld Connections... Technical Data... Style FSA & FSSA; 900#, 100# and 00# Flanged or Butt Weld Connections...*
More informationDistributed By: M&M Control Service, Inc
Fabricated Strainers Fabricated Y Strainers Style FSA & FSSA; 150#, 300# and 600# Flanged or Butt Weld Connections...2 Technical Data...3 Style FSA & FSSA; 900#, 1500# and 2500# Flanged or Butt Weld Connections...*
More informationFord Fabricated Steel Products
Ford Fabricated Steel Products Section N2 12/2000 The Ford Meter Box Co., Inc. 775 Manchester Avenue, P.O. Box 443, Wabash, Indiana, USA 46992-0443 Telephone: 219/563-3171 FAX: 1-800-826-3487 Overseas
More informationBS up.v.c PRESSURE PIPE FITTINGS
BS Equal Elbow 90 Faucet Elbow 90 Equal Tee Reducing Tee To solvent weld to pipes at both end. L A B Dia. d (Gram) ½ 1 5mm 16.5 17.4 16.5 21.50mm 20 ¾ 2 0mm 19.5 19.6 18.8 26.90mm 45 1 25m m 25.5 21.9
More information3 Easy Steps... Plus Your Choice Plus
The 1-5 /8 milling bit: The pivotal component in maintaining pipe integrity; Saving time and money (one cutter for all sizes) EZ2 provides precision, convenience, speed, and reliable performance The EZ
More informationSECTION GENERAL-DUTY VALVES FOR HVAC. A. Section includes valves for building services piping.
SECTION 23 05 23 GENERAL-DUTY VALVES FOR HVAC PART 1 - GENERAL 1.1 SUMMARY A. Section includes valves for building services piping. 1.2 REFERENCES A. AGA Z21.22 (American Gas Association) - Relief Valves
More information15100 VALVES. E. Section Building Automation and Control System Guidelines
15100 VALVES PART 1: GENERAL 1.01 RELATED SECTIONS A. Section 15050 Basic Material and Methods B. Section 15545 Chilled Water System C. Section 15550 Heat Generation D. Section 15790 Coils E. Section 15955
More information2-inch operating nut (other options available) 10 millimeter fusion-bonded epoxy coating (NSF-61) Triple O-ring seal
InsertValve The Team InsertValve TM is a fully functioning, resilient wedge gate valve with a rated working pressure of 250 psig. The valve fully closes, and it provides a clear, unobstructed waterway
More informationPower Voltage Transformers for Air Insulated Substations
Power Voltage Transformers for Air Insulated Substations Introduction Trench Power Voltage Transformers (Power VTs) combine the attributes of an inductive voltage transformer with the application of a
More informationVALVES, FIRE HYDRANTS, AND APPURTENANCES
VALVES, FIRE HYDRANTS, AND APPURTENANCES PART 1 - GENERAL 1.01 SECTION INCLUDES A. Butterfly Valves B. Gate Valves C. Tapping Valve Assemblies D. Fire Hydrant Assemblies E. Flushing Devices (Blowoffs)
More informationA. This Section includes piping and related specialties for general-service compressed-air systems operating at 150 psig or less.
SECTION 221513 - COMPRESSED-AIR PIPING PART 1 - GENERAL 1.1 SUMMARY A. This Section includes piping and related specialties for general-service compressed-air systems operating at 150 psig or less. 1.2
More informationCheck Valve (Model 6000)
Check Valve (Model 6000) s: - 2 to 24 (50mm to 600mm) Rating: - Class 150 to Class 2500 Cast Steel Valves Flange End But-Weld End Information:- www.invacovalves.com sandesh@invacovalves.com invacovalves@gmail.com
More informationSECTION GENERAL-DUTY VALVES FOR PLUMBING PIPING
SECTION 220523 - GENERAL-DUTY VALVES FOR PLUMBING PIPING PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division
More informationCOMBINATION PRESSURE REDUCING AND SOLENOID SHUTOFF CONTROL VALVES 2.01 COMBINATION RESSURE REDUCING AND SOLENOID SHUTOFF CONTROL VALVE
PROJECT NAME LOCATION COMBINATION PRESSURE REDUCING AND SOLENOID SHUTOFF CONTROL VALVES INTRODUCTION This specification covers the design, manufacture, and testing of 1 in. (25 mm) through 36 in. (900
More informationPIGGING PRODUCTS. Capex supply. PIG LAUNCHER and RECEIVER
PIGGING PRODUCTS Capex supply PIG LAUNCHER and RECEIVER Before Cleaning After Cleaning TYPES OF PIGS DISPLACEMENT AND BATCHING PIGS AND PIG WITH BLADES (FOR CLEANING) 2 to 6 3 and 4 PIG with blades 5 to
More informationSizes: 3- through 12-inch Model 660b. Features
660 Tapping Machine Sizes: 3- through 12-inch Model 660b Bulletin No: 1000.005.03 Date: April 2011 Cross Indexing No: n/a Supersedes: 1000.005.02 (02/10) Model 660B Tapping Machines can be either air or
More informationMODULATING FLOAT CONTROL VALVE
PROJECT NAME LOCATION MODULATING FLOAT CONTROL VALVE INTRODUCTION This specification covers the design, manufacture, and testing of 2 in. (50 mm) through 36 in. (900 mm) Control Valves PART 1 - GENERAL
More informationA. American National Standards Institute: 1. ANSI Z Relief Valves for Hot Water Supply Systems.
SECTION 220523 - PLUMBING VALVES PART 1 - GENERAL 1.1 SUMMARY A. Section Includes: 1. Ball valves. 2. Butterfly valves. 3. Swing check valves. 4. Spring loaded check valves. 5. Water pressure reducing
More information1.1 PURPOSE A. This section is intended to define the general installation and minimum product requirements for hydronic and steam valves.
Date Description of Change Pages / Sections Modified ID 6/15/16 Entire document - mgl44 PART 1 - INTRODUCTION 1.1 PURPOSE A. This section is intended to define the general installation and minimum product
More informationType 431, 433. Facts. Flanged Safety Relief Valves spring loaded. The-Safety-Valve.com. Metric Units LWN E
Type 431, 433 Metric Units Flanged Safety Relief Valves spring loaded Facts The-Safety-Valve.com LWN 465.01-E Conventional design 40 Cap H2 18 Adjusting screw with bushing 19 Lock nut 16 Upper spring plate
More informationFLANGES PRODUCT: STANDARD FLANGE CLASSIFICATION: PRESSURE CLASS CLASIFICATION:
FLANGES Gestión de Compras manufactures and supplies flanges according to standards ANSI, BS, DIN, JIS and ISO as well as according to customer specifications. PRODUCT: Flanges are a pipe fitting which
More information10.3 Flanged Connections acc. to EN 1092
10.3 Flanged Connections acc. to EN 1092 EN 1092 is split into two sections: - EN 1092-1 edition 09-2008 for steel flanges - EN 1092-2 edition 06-1997 for cast iron flanges EN 1092 contains dimensions
More informationCrane. UNI-CHEK High Performance Check Valves
Crane UNI-CHEK High Performance Check Valves High Performance Uni-Chek Valves for Backflow Prevention In almost every piping system, there is a need for backflow prevention. Most piping systems utilize
More informationSERVICE FEATURES CAST STEEL VALVES PRODUCTION RANGE PRODUCTION MATERIALS. Class Type UNIT : NPS GATE
API 600 Cast Steel Valves 1 SERVICE FEATURES Several trim combinations available for various services. Straight-through port design offering a good flow with minimum frictional loss and turbulence. Cast
More informationFLEXIBLE PENDANTS with Axis MEDICAL GAS TERMINAL UNITS
FLEXIBLE PENDANTS with Axis MEDICAL GAS TERMINAL UNITS Phoenix Pipeline Products Limited. Unit 8, McKenzie Industrial Park, Tel No.: 44 (0) 161 428 7200 Bird Hall Lane, Fax No.: 44 (0) 161 428 7010 Stockport,
More informationSpecifications For Valve Insertion System
Specifications For Valve Insertion System Equipment For Valve Insertion Pipe Sizes: 4 (100mm) Through 12 (300mm) 1.0 SCOPE This specification covers the furnishing, complete EZ Valve insertion system.
More informationBoiler Feed Booster Pump YNK. Type Series Booklet
YNK Type Series Booklet Legal information/copyright Type Series Booklet YNK All rights reserved. The contents provided herein must neither be distributed, copied, reproduced, edited or processed for any
More informationSempell High Pressure Stop Valves Model VA510 (DIN)
Designed for highest pressure and temperature applications using high alloy or stainless steels. Features T-pattern globe type Body made of forged steel Wear resistant stellite body seat Conical seat with
More informationMULTI/JOINT. One size fits and grips all End-load resistant - Flexible DN50 - DN600
MULTI/JOINT One size fits and grips all End-load resistant - Flexible DN50 - DN600 1 MULTI/JOINT FITTINGS large tolerance fittings It means that pipes that can be fitted may have different diameters, with
More informationMONOVAR is the energy dissipating valve.
MONOVAR is the energy dissipating valve. Features Extremely simple design (patented) Excellent cavitation characteristics Very accurate flow or pressure control Manual or automatic control Suitable for
More informationNARVIK-YARWAY. Heavy Duty A.T. - Temp Desuperheater Model: 18/54 and 28/64
NARVIK-YARWAY Narvik-Yarway covers requirements for Desuperheaters, pneumatic actuators, strainers with a wide range of models, sizes and materials to satisfy all the specifications of the power-pulp &
More informationLB-04 HAMER LINE BLIND VALVES
LB-04 HAMER LINE BLIND VALVES INTRODUCTION AND TABLE OF CONTENTS Line Blinding: An Introduction Line blinding is the use of a solid flat plate to obtain absolute shutoff of flow. Whether used with liquids,
More informationPrecision is Central.
Precision is Central. As experts in pipe joining solutions, we know precision is vital to every fitting and how they are fused. We offer the most complete range of conventional fusion fittings, injection
More informationTwo shift operation power plants. Stop valves. Body materials
Two shift operation power plants Power stations that were originally designed for base load applications are now increasingly being asked to operate on a two shift, stop/start regime; this is more commonly
More informationT-Bar Bonnet. Monoflanges STANDARD OPTIONS. O.S.&Y. Bonnet (firesafe) Gas Solution Bonnet. Anti-Tamper Bonnet
T-Bar Bonnet Gas Solution bonnet with non-rotating Metal Stem Tip The Gas Solution bonnet protects the internal and external threads. Moreover, the bonnet thread is less subject to wear, since it is not
More informationSECTION GENERAL-DUTY VALVES FOR PLUMBING PIPING
SUNY GENESEO 220523-1 PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections, apply
More informationWEDGE & SLAB GATE VALVES
GW & GS Series GATE VALVES WEDGE & SLAB GATE VALVES PROCESS VALVES WEDGE GATE AND SLAB GATE VALVES FOR SPECIAL APPLICATIONS Wedge gate Valves Code: GW2M Hand wheel for small sizes Large size valves have
More informationDELUGE VALVE MODEL: SD-DVA TECHNICAL DATA : VALVE OPERATION TRIM DESCRIPTION DESCRIPTION PRESSURE THREADED OPENING
DELUGE VALVE MODEL: SD-DVA TECHNICAL DATA : NOMINAL SIZE MATERIAL MAXIMUM SERVICE PRESSURE 200, 150, 100, 80 & 50NB Cast Iron 12 Bar (175 PSI) THREADED OPENING MOUNTING FACTORY HYDROSTATIC TEST PRESSURE
More informationFisher RSS Lined Globe Valve
Instruction Manual D0990 November 009 RSS Valve Fisher RSS Lined Globe Valve Contents Introduction............................... Scope of Manual.......................... Description...............................
More informationFisher CV500 Rotary Globe Control Valve
CV500 Valve D101606012 Product Bulletin Fisher CV500 Rotary Globe Control Valve The Fisher CV500 Cam Vee-Ball control valve combines the rangeability of the cammed-segmented V-notched ball, with the inherent
More informationFisher RSS Lined Globe Valve
Instruction Manual D0990 RSS Valve July 07 Fisher RSS Lined Globe Valve Contents Introduction... Scope of Manual... Description... Educational Services... Specifications... Installation... Maintenance...
More informationASMECourseCatalog.
ASMECourseCatalog www.energyu.org www.midwestenergy.org ASME Abnormal Operating Conditions... 6 ASME GAS01 Hazards of Natural Gas and Prevention of Accidental Ignition... 6 ASME 0001 Measure Structure-to-Electrolyte
More informationBolted Bonnet Valves. (BL Series) Cast Steel. Cast Steel Bolted Bonnet Valves - BL Series
Cast Steel Bolted Bonnet Valves (BL Series) Gate Valve - BL5 Series Gate Valve Features Globe Valve - BL6 Series Globe Valve Features Swing Check Valve - BL7 Series Optional Features Model Numbers GATE
More informationType 455, 456. Facts. Flanged Safety Relief Valves spring loaded. The-Safety-Valve.com. US Units
Type 455, 456 Flanged Safety Relief Valves spring loaded US Units Facts The-Safety-Valve.com LWN 468.08-E 462.01-D 40 Cap H2 19 Lock nut 18 Adjusting screw 16 Upper spring plate 9 Bonnet 12 Spindle 54
More informationPower-Seal High Performance Butterfly Valve: Series P1 Installation & Maintenance Manual
CAUTION: 1. For your safety read this manual completely before installation or servicing. 2. Before installing or servicing, please ensure the line pressure has been relieved, and any hazardous fluids
More information2010 BMW M6. Fig. 3: Identifying Front Axle Components Courtesy of BMW OF NORTH AMERICA, INC LAYOUT OF SPRING STRUT SHOCK ABSORBER
Fig. 3: Identifying Front Axle Components 31.... LAYOUT OF SPRING STRUT SHOCK ABSORBER Fig. 4: Identifying Spring Strut Shock Absorber Components 31 00... FRONT AXLE + STEERING: WHEEL/CHASSIS ALIGNMENT
More informationPROCESS INTEGRITY Engineering Solutions and On-Site Services
PROCESS INTEGRITY Engineering Solutions and On-Site Services Specialised Engineering Services Hydratight is an innovative provider of engineering solutions and on-site services designed to maintain the
More informationHANCOCK 600 GATE, GLOBE AND CHECK VALVES FORGED STEEL
HANCOCK 600 GATE, GLOBE AND CHECK VALVES A range of ASME class 800 and 1500 reduced bore forged steel valves with screwed, socket weld, butt weld or flanged ends GATE VALVES A compact but extremely sturdy
More informationThe Number One Choice of Line Stopping Contractors
JCM 0 Line Stop Fittings Take a Look!!! JCM 0 FAMILY OF LINE STOP FITTINGS HAS EPANDED New Plug Option - New Numbering System Whatever your application needs, JCM has it! JCM Industries offers the largest
More informationSensor Mounting MACHINERY MONITORING. Mounting Configurations. Temporary Mounting
Sensor Mounting When using Piezoelectric sensors to measure vibration, the sensor must directly contact the machine surface. The more intimate and stiff the contact between sensor and the machine, the
More informationSECTION DOMESTIC-WATER PACKAGED BOOSTER PUMPS
SECTION 221123.13 - DOMESTIC-WATER PACKAGED BOOSTER PUMPS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division
More informationVB VALVES & AUTOMATION
Introduction to Valve What are Valves? Valves are mechanical device that controls the flow and pressure within a system or process. They are essential components of a piping system that conveys liquids,
More informationValve Selection. 1. Function and service considerations
1. Function and service considerations Valve Selection Selection Valves serve the purpose of controlling the fluids in building services piping. Valves are produced in a variety of design types and materials.
More informationTBV Valve Instrument Connection Systems Quality measurement technology, proven close-coupled mounting practices, and integrated hardware for optimal
TBV Valve Instrument Connection Systems Quality measurement technology, proven close-coupled mounting practices, and integrated hardware for optimal transmitter performance Content TBV Valve Instrument
More informationAPI6A Valves products CATALOG
API6A Valves products CATALOG INDEX 1. DFC TYPE GATE VALVE 2. DF TYPE PARRALLEL GATE VALVE 3. DWKM TYPE EXPANDING GATE VALVE 4. MUD GATE VALVE 5. CAGE CHOKE VALVE 6. ORIFICE CHOKE VALVE 7. POSITIVE CHOKE
More informationbrands you trust. ALOYCO Corrosion Resistant Stainless Steel Valves
brands you trust. LOYCO Corrosion Resistant Stainless Steel s Key Features and pplications Key Features and enefits Full material offering including CF8M, CF3M, and CN7M (lloy 20) road pressure classes
More informationThe SWL Series Swing Check Valves Meets AWWA C Standards (Full Waterway) Accepts Air Cushions Cost-effective Swing Check Valve Solution
The Series Meets AWWA C-508-01 Standards (Full Waterway) Accepts Air Cushions Cost-effective Swing Check Valve Solution Crispin Since 1905 Crispin Multiplex Manufacturing Co. 600 Fowler Avenue Berwick,
More information