Boiler Feed Booster Pump YNK. Type Series Booklet

Save this PDF as:
 WORD  PNG  TXT  JPG

Size: px
Start display at page:

Download "Boiler Feed Booster Pump YNK. Type Series Booklet"

Transcription

1 YNK Type Series Booklet

2 Legal information/copyright Type Series Booklet YNK All rights reserved. The contents provided herein must neither be distributed, copied, reproduced, edited or processed for any other purpose, nor otherwise transmitted, published or made available to a third party without the manufacturer's express written consent. Subject to technical modification without prior notice. KSB Aktiengesellschaft, Frankenthal

3 Contents Contents Energy YNK... 4 Main applications... 4 Fluids handled... 4 Operating data... 4 Designation... 4 Design details... 5 Materials... 6 Dimensions... 7 General assembly drawings with list of components YNK 300/670, YNK 400/ YNK 200/430, YNK 300/520, YNK 300/600, YNK 300/680, YNK 350/500, YNK 400/770, YNK 500/

4 Energy YNK Designation Example: YNK 500/800 Designation key Code Description YNK Type series group 500 Nominal discharge nozzle diameter [mm] 800 Maximum outside diameter of the impeller (nominal ) [mm] Main applications Feed water transport in power stations Condensate transport in power stations Boiler feed booster pump in systems with low suction head Fluids handled Feed water Condensate Hot water Operating data Operating properties Characteristic Value Flow rate Q [m 3 /h] ) Q [l/s] ) Head 2) H [m] 370 1) Fluid temperature T [ C] 210 Inlet pressure p S [bar] 20 Discharge pressure 2) p d [bar] 40 Speed n [rpm] ) At maximum permissible speed 2) Q = 0, ρ = 1 kg/dm³ 4 YNK

5 Design details Design Radially split volute casing pump with radial impeller Volute casing (single or double volute) Overview of single and double volute casings Size Volute casing design Single volute Double volute 200/ / / / / / / / / /800 - Drive Connected by means of studs with covers inserted and flange-mounted on either side Horizontal installation Double-entry Single-stage Electric motor Turbine via gear Direction of rotation Depends on casing position and nozzle orientation Clockwise or anti-clockwise, viewed from the drive Suction nozzle Connection type 1: Suction nozzle with flange connection to DIN EN , raised face type B Suction nozzle with flange connection to ASME Class 300, raised face type RF Connection type 2: Weld end Discharge nozzle Connection type 1: Discharge nozzle with flange connection to DIN EN , raised face type B Discharge nozzle with flange connection to ASME Class 300, raised face type RF Connection type 2: Weld end Nozzle position 2: Suction nozzle DN1 at bottom, discharge nozzle DN2 on top 3: Suction nozzle DN1 at bottom, discharge nozzle DN2 at bottom 4: Suction nozzle DN1 on top, discharge nozzle DN2 on top 5: Suction nozzle DN1 horizontal, discharge nozzle DN2 horizontal Pump feet arrangement Horizontal Centreline Impeller type Closed double-entry radial impeller with multiply curved vanes Axial thrust balancing Hydraulically by double-entry impeller Absorption of residual axial thrust by pivoted segmental thrust bearing Bearings Forced oil lubricated radial plain bearings and pivoted segmental thrust bearings Shaft seal Single mechanical seal Uncooled With jacket cooling With mating ring cooling With circulation cooling Replaceable shaft sleeve Possible nozzle positions 1: Suction nozzle DN1 on top, discharge nozzle DN2 at bottom YNK 5

6 Materials Part No. Description Material /.02 Diffuser plate Chrome steel 102 Volute casing Cast chrome steel 160 Cover Carbon steel (plated) 162 Suction cover Cast chrome steel 210 Shaft Chrome steel 234 Double-entry impeller Cast chrome steel Bearing housing Grey cast iron 441 Shaft seal housing Chrome steel /.02 Casing wear ring Chrome steel 523 Shaft sleeve Chrome steel /.02 Stud Steel which is creep-resistant at elevated temperatures 6 YNK

7 Dimensions Suction nozzle DN1: on top, discharge nozzle DN2: on top or suction nozzle DN1: at bottom, discharge nozzle DN2: at bottom 3) DN2 w z DN1 l1 l4 l5 h2 h1 f h4 a X a) s Ø dm6 X l8 l3 l2 l9 l10 b1 t u Ø dm6 a) Direction of rotation Dimensions [mm] Size DN1 DN2 l1 l2 l3 l4 l5 l8 l9 l10 h1 h2 h4 w z 200/ / / / / / ) 482 4) / / ) 476 4) Dimensions [mm] Size DN1 DN2 a 5) b1 f d t s u 6) 200/ , / , / , , / , / , / ) 482 4) , / / ) 476 4) ) Only if the pump foot geometry is symmetric 4) Weld end on request 5) Clearance required for removal of rotor (from the shaft end) 6) Number of keys YNK 7

8 Suction nozzle DN1: on top, discharge nozzle DN2: at bottom or suction nozzle DN1: at bottom, discharge nozzle DN2: on top 7) DN1 l1 l4 l5 h2 h1 f a Ø dm6 X X a) l8 l9 l10 h3 b1 t u Ø dm6 s w l3 l2 DN2 a) Direction of rotation Dimensions [mm] Size DN1 DN2 l1 l2 l3 l4 l5 l8 l9 l10 h1 h2 h3 w z 300/ / ) 382 8) / / ) 392 8) / ) 381 8) / / ) 479 8) / ) 575 8) Dimensions [mm] Size DN1 DN2 a 9) b1 f d t s u 10) 300/ , / ) 382 8) , / , / ) 392 8) / ) 381 8) / / ) 479 8) / ) 575 8) ) Only if the pump foot geometry is symmetric 8) Weld end on request 9) Clearance required for removal of rotor (from the shaft end) 10) Number of keys 8 YNK

9 Suction nozzle DN1: horizontal, discharge nozzle DN2: horizontal l3 l2 l1 l4 l5 DN1 DN1 h2 h4 a l8 l9 X a) t f Ødm6 X l6 l7 b1 u s Ødm6 a) Direction of rotation Dimensions [mm] Size DN1 DN2 l1 l2 l3 l4 l5 l6 l7 l8 l9 l10 h1 h2 h3 h4 w z 300/ / / ) ) Dimensions [mm] Size DN1 DN2 a 12) b1 f d t s u 13) 300/ , , / , / ) ) Suction nozzle DN1: vertical, discharge nozzle DN2: horizontal 14) Dimensions [mm] Size DN1 DN2 l1 l2 l3 l4 l5 l6 l7 h1 h2 h3 w z a 15) b1 f d t s u 16) 200/ , / , / ) ) , ) Weld end on request 12) Clearance required for removal of rotor (from the shaft end) 13) Number of keys 14) With this combination please observe the interdependency of direction of rotation and nozzle orientation. 15) Clearance required for removal of rotor (from the shaft end) 16) Number of keys 17) Weld end on request YNK 9

10 General assembly drawings with list of components YNK 300/670, YNK 400/710 (1M.3) (26M.1) (672) 13D (720.01) (12A) (4M.4) (4M.5) 384 (26M.2) 314 (392.01) (387.01) (900.03) (562.16) A E B E.1 (4M.3) (4M.1) (1M.1) (4M.6) 6B (4M.2) (1M.2) B 13B E A (411.99) (904.99) (903.99) 13A (411.99) General drawing of YNK 300/670, YNK 400/ YNK

11 List of components Part No. Description Part No. Description /.02 Diffuser plate /.02 Casing wear ring 102 Volute casing Spacer ring 160 Cover Loose collar 210 Shaft Thrower 234 Double-entry impeller Spacer sleeve 314 Thrust bearing /.05/.12/.13/.14 Disc Bearing housing Washer 354 Thrust bearing housing Pin 360 Bearing cover /.16 Parallel pin 361 Non-drive end bearing cover 672 Vent 370 Bearing shell /.04 Guard 384 Thrust bearing plate /.02 Temperature measuring instrument Thrust bearing segment Special pipe part Bearing segment carrier Flange Gasket Screw /.02 Profile seal /.12./13 Hexagon head bolt /.03/.99 Joint ring /.02/.11 Stud /.09/.10/.11/.12/.18 O-ring Screw plug Shaft seal ring /.04/.05/.99 Grub screw Labyrinth ring /.02/.04/.09/.11/.13 Hexagon socket head cap screw 433 Mechanical seal /.04/.09/.11/.14 Nut 441 Shaft seal housing Circlip 501 Segmental ring /.02/.05 Key Connections Connection 1M.1/.2/.3 4M.1/.2/.3/.4/.5/.6 Description Pressure gauge Connection for temperature measuring instruments 6B.1 Drain 7A.1 Cooling liquid outlet 7E.1 Cooling liquid inlet 8B Leakage drain 12A Circulation liquid outlet 13A.1/.3 Oil outlet 13B.1/.3 Oil drain 13D.1 Oil filling and venting 13E.1/.3 Oil inlet 26M.1/.2 Vibration measurement YNK 11

12 YNK 200/430, YNK 300/520, YNK 300/600, YNK 300/680, YNK 350/500, YNK 400/770, YNK 500/800 (1M.3) 354 (692.02) (4M.4) (4M.5) (26M.2) (392.01) (387.01) (387.02) (562.16) (900.03) E A B.3 (26M.1) E.1 (692.01) (4M.3) (12A) (720.02) B (4M.1) (1M.1) (1M.2) B B.1 (4M.1) (1M.1) (1M.2) D.1 (913.01) (672) 7A E B A B General drawing of YNK 200/430, YNK 300/520, YNK 300/600, YNK 300/680, YNK 350/500, YNK 400/770, YNK 500/ YNK

13 List of components Part No. Description Part No. Description 102 Volute casing Spacer ring /.02 Suction cover Loose collar 210 Shaft Thrower 234 Double-entry impeller Spacer sleeve 314 Thrust bearing /.05/.12/.13/.14 Disc Bearing housing Washer 354 Thrust bearing housing Pin 360 Bearing cover /.16 Parallel pin 361 Non-drive end bearing cover 672 Vent 370 Bearing shell /.04 Guard 384 Thrust bearing plate /.02 Temperature measuring instrument /.02 Thrust bearing segment Special pipe part Bearing segment carrier Flange Gasket Screw /.02 Profile seal /.12./13 Hexagon head bolt /.03 Joint ring /.02/.11 Stud /.07/.09/.10/.11/.12/.18 O-ring /.04/.05 Grub screw Shaft seal ring Vent plug Labyrinth ring /.11/.13 Hexagon socket head cap screw 433 Mechanical seal /.04/.09/.11/.14 Nut 441 Shaft seal housing Circlip 501 Segmental ring /.02/.05 Key /.02 Casing wear ring Connections Connection Description 1M.1/.2/.3 Pressure gauge 4M.1/.3/.4/.5 Connection for temperature measuring instruments 6B.1/.2/.3 Drain 7A.1 Cooling liquid outlet 7E.1 Cooling liquid inlet 8B Leakage drain 12A Circulation liquid outlet 13A.1/.3 Oil outlet 13B.1/.3 Oil drain 13D.1 Oil filling and venting 13E.1/.3 Oil inlet 26M.1/.2 Vibration measurement YNK 13

14 KSB Aktiengesellschaft Frankenthal Johann-Klein-Str Frankenthal (Germany) Tel Fax /01-EN

Heat Transfer Fluid / Hot Water Pump HPK-L. Type Series Booklet

Heat Transfer Fluid / Hot Water Pump HPK-L. Type Series Booklet Heat Transfer Fluid / Hot Water Pump HPK-L Type Series Booklet Legal information/copyright Type Series Booklet HPK-L All rights reserved. The contents provided herein must neither be distributed, copied,

More information

Etanorm SYT Type Series Booklet

Etanorm SYT Type Series Booklet Thermal Oil / Hot Water Pump Etanorm SYT Type Series Booklet Legal information/copyright Type Series Booklet Etanorm SYT All rights reserved. The contents provided herein must neither be distributed, copied,

More information

Thermal Oil / Hot Water Pump. Etanorm SYT. General Arrangement Drawings

Thermal Oil / Hot Water Pump. Etanorm SYT. General Arrangement Drawings Thermal Oil / Hot Water Pump Etanorm SYT General Arrangement Drawings Legal information/copyright General Arrangement Drawings Etanorm SYT All rights reserved. The contents provided herein must neither

More information

Non-return Valve BOA-RVK PN 6/10/16 DN Type Series Booklet

Non-return Valve BOA-RVK PN 6/10/16 DN Type Series Booklet Non-return Valve BOA-RVK PN 6/10/16 DN 15-200 Type Series Booklet Legal information/copyright Type Series Booklet BOA-RVK KSB Aktiengesellschaft Pegnitz All rights reserved. Contents provided herein must

More information

Waste Water, Condensate and Heat Transfer Liquid Pump. Type Series Booklet

Waste Water, Condensate and Heat Transfer Liquid Pump. Type Series Booklet Waste Water, Condensate and Heat Transfer Liquid Pump MK Type Series Booklet Legal information/copyright Type Series Booklet MK All rights reserved. The contents provided herein must neither be distributed,

More information

Mag-drive Pump. Magnochem-Bloc. Type Series Booklet

Mag-drive Pump. Magnochem-Bloc. Type Series Booklet Mag-drive Pump Magnochem-Bloc Type Series Booklet Legal information/copyright Type Series Booklet Magnochem-Bloc All rights reserved. The contents provided herein must neither be distributed, copied, reproduced,

More information

Lenntech. Calio-Therm S. Type Series Booklet. High-efficiency Drinking Water Pump

Lenntech. Calio-Therm S. Type Series Booklet. High-efficiency Drinking Water Pump Lenntech info@lenntech.com Tel. +--6-9 www.lenntech.com Fax. +--66-89 High-efficiency Drinking Water Pump Calio-Therm S Type Series Booklet Legal information/copyright Type Series Booklet Calio-Therm S

More information

Submersible Borehole Pump. UPAchrom. 4", UPAchrom 100 CC + DN 100. Type Series Booklet

Submersible Borehole Pump. UPAchrom. 4, UPAchrom 100 CC + DN 100. Type Series Booklet Submersible Borehole Pump UPAchrom 4", UPAchrom 1 CC + DN 1 Type Series Booklet Legal information/copyright Type Series Booklet UPAchrom All rights reserved. The contents provided herein must neither be

More information

Etaprime B Type Series Booklet

Etaprime B Type Series Booklet Self-priming Pump Etaprime B Type Series Booklet Legal information/copyright Type Series Booklet Etaprime B All rights reserved. The contents provided herein must neither be distributed, copied, reproduced,

More information

BOACHEM ZYA. Type Series Booklet

BOACHEM ZYA. Type Series Booklet Globe Valve BOACHEM ZYA PN 10-40 DN 15-200 Gland Packing Flanged Ends Type Series Booklet Legal information/copyright Type Series Booklet BOACHEM ZYA KSB Aktiengesellschaft All rights reserved. Contents

More information

AKG-A/AKGS-A Type Series Booklet

AKG-A/AKGS-A Type Series Booklet Gate Valve AKG-A/AKGS-A PN 63-160 DN 80/80-300/250 Type Series Booklet Legal information/copyright Type Series Booklet AKG-A/AKGS-A All rights reserved. The contents provided herein must neither be distributed,

More information

High-pressure pumps Series HP45

High-pressure pumps Series HP45 High-pressure pumps Series HP45 www.andritz.com/pumps General Description / Application Multi-stage high pressure pumps for water supply, irrigation and industrial applications, for hot and cold water

More information

Self-priming Pump. Etaprime B. Type Series Booklet

Self-priming Pump. Etaprime B. Type Series Booklet Self-priming Pump Etaprime B Type Series Booklet Legal information/copyright Type Series Booklet Etaprime B All rights reserved. The contents provided herein must neither be distributed, copied, reproduced,

More information

Pump Station. Ama-Porter CK Pump Station. Type Series Booklet

Pump Station. Ama-Porter CK Pump Station. Type Series Booklet Pump Station Ama-Porter CK Pump Station Type Series Booklet Legal information/copyright Type Series Booklet Ama-Porter CK Pump Station All rights reserved. The contents provided herein must neither be

More information

Maintenance-free metal-seated globe valves. Grey cast iron PN 16 DN Nodular cast iron PN 16 DN Nodular cast iron PN 25 DN

Maintenance-free metal-seated globe valves. Grey cast iron PN 16 DN Nodular cast iron PN 16 DN Nodular cast iron PN 25 DN Type Series Booklet 7150.1/9-10 BOA -H Maintenance-free metal-seated globe valves with bellows Grey cast iron PN 16 DN 15-300 Nodular cast iron PN 16 DN 15-350 Nodular cast iron PN 25 DN 15-150 Applications

More information

High-pressure pumps Series HP49

High-pressure pumps Series HP49 High-pressure pumps Series HP49 www.andritz.com/pumps General Description / Application Multi-stage high pressure pumps for water supply, irrigation and industrial applications, for hot and cold water

More information

Non-return Valve BOA-R. PN 6/16 DN Flanged. Type Series Booklet

Non-return Valve BOA-R. PN 6/16 DN Flanged. Type Series Booklet Non-return Valve BOA-R PN 6/16 DN 15-350 Flanged Type Series Booklet Legal information/copyright Type Series Booklet BOA-R KSB Aktiengesellschaft Pegnitz All rights reserved. Contents provided herein must

More information

Contents. Identification

Contents. Identification Contents Identification Type key Product data Introduction Applications Features and benefits Performance range pole pole Construction Sectional drawing Construction features Test pressure Operating conditions

More information

Data sheet. Omega B GB G F Version no.: 1. Operating data. Design. Driver, accessories. Clean water. Actual developed head 57.

Data sheet. Omega B GB G F Version no.: 1. Operating data. Design. Driver, accessories. Clean water. Actual developed head 57. Data sheet Item no.: 3700 Page: 1 / 5 Operating data Pumped medium Water Actual flow rate 415.38 m ³/h Clean water Actual developed head 57.81 m Not containing chemical and Efficiency 82.3 % mechanical

More information

Axially split volute casing pumps. Applications. Bearings. Shaft seal. Operating data

Axially split volute casing pumps. Applications. Bearings. Shaft seal. Operating data Type series booklet 1385.52/3--10 RDLV Axially split volute casing pumps Applications Waterworks, irrigation and drainage pumping stations, power stations, industrial water supply systems, fire fighting

More information

KWP non-clogging centrifugal pump. Designation

KWP non-clogging centrifugal pump. Designation Type series booklet.5/80 G KWP KWP nonclogging centrifugal pump Automation products available: PumpEpert Hyamaster hyatronic Fields of Application For handling all kinds of pulps not liable to plait, as

More information

High Pressure Boiler Feed Pump

High Pressure Boiler Feed Pump DG High Pressure Boiler Feed Pump Application Type DG high pressure boiler feed pumps are used for feeding high pressure boiler or pumping high pressure clean water. The temperature of pumped media is

More information

Data sheet. Customer item no.: Communication dated: Number: ES Doc. no.: Item no.: 100 Quantity: 1 Date: 19/03/2015 Page: 1 / 6

Data sheet. Customer item no.: Communication dated: Number: ES Doc. no.: Item no.: 100 Quantity: 1 Date: 19/03/2015 Page: 1 / 6 Data sheet Item no.: Page: 1 / 6 Operating data Operating data determined for maximum inlet pressure Pumped medium Water Clean water Not containing chemical and mechanical substances which affect the materials

More information

Data sheet. Etaline GN /3002 G11 Version no.: 1 Inline pump. Operating data. Design. Clean water. Efficiency 61.6 % 20.0 C.

Data sheet. Etaline GN /3002 G11 Version no.: 1 Inline pump. Operating data. Design. Clean water. Efficiency 61.6 % 20.0 C. Data sheet Item no.: 1900 Page: 1 / 5 Operating data Pumped medium Water Actual flow rate 72.19 m ³/h Operating data determined for maximum inlet pressure Actual developed head 70.26 m Clean water Efficiency

More information

Bearings. Shaft seal. Materials

Bearings. Shaft seal. Materials Type series booklet 1385.51/3--10 RDL Axially split volute casing pumps Applications Waterworks, irrigation and drainage pumping stations, power stations, industrial water supply systems, fire fighting

More information

BEV. Deep well vertical pumps. 3. Design. 1. Fields of Application. 4. Designation. 2. Operating Data

BEV. Deep well vertical pumps. 3. Design. 1. Fields of Application. 4. Designation. 2. Operating Data Type series booklet CTI-2000/00 [09-2010] BEV Deep well vertical pumps 1. Fields of Application BEV are vertical multistage centrifugal pumps designed for deep well, ditches and tanks to pump clean liquids

More information

Data sheet. Etaline GN /1852 G10 Version no.: 1 Inline pump. Operating data. Design. Requested developed head m

Data sheet. Etaline GN /1852 G10 Version no.: 1 Inline pump. Operating data. Design. Requested developed head m Data sheet Item no.: 2600 Page: 1 / 5 Operating data Requested flow rate 40.00 m ³/h Actual flow rate 40.00 m ³/h Requested developed head 68.00 m Actual developed head 68.00 m Pumped medium Water Efficiency

More information

BOAX-B Mat E. Type Series Booklet

BOAX-B Mat E. Type Series Booklet Butterfly Valve with Electric Actuator BOAX-B Mat E PS 16 bar: DN 40 to 200 PS 10 bar: DN 250 and 300 Design to EN 593 and ISO 10631 Type Series Booklet Legal information/copyright Type Series Booklet

More information

APIFLO-M series Series

APIFLO-M series Series APIFLO-M series Series Horizontal Multistage Pump According to API610 Capacity: up to 650m 3 /h (50Hz) up to 780 m 3 /h (60Hz) Head: up to 1200m (50Hz) up to 1728 m (60Hz) Pressure: APIFLO-M: up to 25

More information

SISTO-16RGA. Type Series Booklet

SISTO-16RGA. Type Series Booklet Diaphragm Valve SISTO-16RGA PN16 DN 15-80 / Rp 1/2"-3" Maintenance-free Threaded Ends Gunmetal Type Series Booklet Legal information/copyright Type Series Booklet SISTO-16RGA All rights reserved. The contents

More information

PWD. PWD API 610 BB1 Single Stage Pump

PWD. PWD API 610 BB1 Single Stage Pump PWD PWD API 610 BB1 Single Stage Pump HYDRAULIC PERFORMANCE COVERAGE FLOW (m 3 /h) 50 Hz Performance Coverage Visit our web site at www.pumpworks610.com and specify flow and performance needs and obtain

More information

Data sheet. Page: 1 / 5. ETL GGSAV11D BKSBIE3 Inline pump. Operating data. Design

Data sheet. Page: 1 / 5. ETL GGSAV11D BKSBIE3 Inline pump. Operating data. Design Data sheet Page: 1 / 5 Operating data Requested flow rate Operating data determined for maximum inlet pressure Requested developed head 15.00 m Pumped medium Ambient air temperature 20.0 C Fluid temperature

More information

Standardised Water Pump. Etanorm. Type Series Booklet

Standardised Water Pump. Etanorm. Type Series Booklet Standardised Water Pump Etanorm Type Series Booklet Legal information/copyright Type Series Booklet Etanorm KSB Aktiengesellschaft All rights reserved. The contents provided herein must neither be distributed,

More information

Centrifugal End Suction Fire Pumps

Centrifugal End Suction Fire Pumps Centrifugal End Suction Fire Pumps 1 Centrifugal End Suction Fire Pumps Product Overview American-Marsh Model FP-REF End Suction pumps are used in a variety of fire protection services every day. These

More information

Globe Valve BOA-H. PN 16/25 DN Bellows Flanged. Type Series Booklet

Globe Valve BOA-H. PN 16/25 DN Bellows Flanged. Type Series Booklet Globe Valve BOA-H PN 16/25 DN 15-350 Bellows Flanged Type Series Booklet Legal information/copyright Type Series Booklet BOA-H KSB Aktiengesellschaft All rights reserved. The s provided herein must neither

More information

KE ELASTOMER. Type Series Booklet

KE ELASTOMER. Type Series Booklet Butterfly Valve KE ELASTOMER Centred-disc Butterfly Valve Elastomer Liner DN 40-300 PS 10 bar Type Series Booklet Legal information/copyright Type Series Booklet KE ELASTOMER All rights reserved. The contents

More information

Volute Casing Pump additional sizes to those of ISO 2858/EN 22858

Volute Casing Pump additional sizes to those of ISO 2858/EN 22858 Volute Casing Pump additional sizes to those of ISO 2858/EN 22858 CBTA 150200...350400 + 2 additional sizes 100160 and 125200 TECHNICAL DATA Output: up to 2200 m 3 /h Delivery head: up to 160 m Speed:

More information

CPS. Horizontal Split Case Centrifugal Pump

CPS. Horizontal Split Case Centrifugal Pump CPS Horizontal Split Case Centrifugal Pump CPS Series pumps, are single-stage double suction split case centrifugal pumps designed for applications of clean water or similar liquids without solids in water

More information

PN 16/PN 25 Volute Centrifugal-Pumps for Heat Transfer Media Thermal Oil up to 400 C Hot Water up to 207 C

PN 16/PN 25 Volute Centrifugal-Pumps for Heat Transfer Media Thermal Oil up to 400 C Hot Water up to 207 C PN 16/PN 25 Volute Centrifugal-s for Heat Transfer Media Thermal Oil up to 00 C Hot Water up to 7 C Series NTWH/CTWH Series NBWH/CBWH Series NIWH/CIWH Application For circulating heat transfer media such

More information

CSO/CP Series. Alloys to suit all applications. Proud Manufacturers of SAMCO Pumps

CSO/CP Series. Alloys to suit all applications. Proud Manufacturers of SAMCO Pumps CSO/CP Series SAM Engineering (Pty) Ltd. 2 Duncan Road, Lilianton, Boksburg, South Africa Tel: +27 (0) 23 Fax: +27 (0) 2393 Email: pumps@sameng.co.za www.sameng.co.za Alloys to suit all applications Proud

More information

NC State University Design and Construction Guidelines Division 23 Hydronic Pumps

NC State University Design and Construction Guidelines Division 23 Hydronic Pumps 1.0 Purpose A. The following guidelines apply to the selection of pumps primarily for circulating water. It is the goal of NC State to purchase pumps that are selected to provide a long service life, minimal

More information

Technical data 50 & 60 Hz. Vertical centrifugal pumps Series: DPLHS

Technical data 50 & 60 Hz. Vertical centrifugal pumps Series: DPLHS Technical data 50 & 60 Hz Vertical centrifugal pumps Series: DPLHS 2 Table of Contents 1 Pump introduction 1.1 General... 4 1.2 Model key... 4 1.3 Description of the product... 4 1.4 Operation... 5 1.5

More information

Standard SO according to DIN

Standard SO according to DIN Standard SO according to DIN 24.255 DESIGN FEATURES Design Features Horizontal centrifugal, single Stage pump. Spiral volute casing. Overhung on shaft impeller. Grease or oil lubricated antifriction bearing.

More information

Type 441 XXL 442 XXL. Facts. Flanged Safety Relief Valves spring loaded. The-Safety-Valve.com. Metric Units LWN E

Type 441 XXL 442 XXL. Facts. Flanged Safety Relief Valves spring loaded. The-Safety-Valve.com. Metric Units LWN E Type 441 442 Flanged Safety Relief Valves spring loaded Metric Units Facts The-Safety-Valve.com LWN 462.07-E Conventional design 40 Bolted Cap H1 18 Adjusting screw 19 Lock nut 69 Needle bearing 16 Upper

More information

Standardised Water Pump. Etanorm. Type Series Booklet

Standardised Water Pump. Etanorm. Type Series Booklet Standardised Water Pump Etanorm Type Series Booklet Legal information/copyright Type Series Booklet Etanorm All rights reserved. The contents provided herein must neither be distributed, copied, reproduced,

More information

Butterfly Valve ISORIA 25. Centred-disc Butterfly Valve AMRING Elastomer Liner DN PS 25 bar. Type Series Booklet

Butterfly Valve ISORIA 25. Centred-disc Butterfly Valve AMRING Elastomer Liner DN PS 25 bar. Type Series Booklet Butterfly Valve ISORIA 25 Centred-disc Butterfly Valve AMRING Elastomer Liner DN 32-1000 PS 25 bar Type Series Booklet Legal information/copyright Type Series Booklet ISORIA 25 Original operating manual

More information

Side channel pumps PN 16 SOH - SOHB - SOHM. Self-priming centrifugal pumps. Technical description

Side channel pumps PN 16 SOH - SOHB - SOHM. Self-priming centrifugal pumps. Technical description Side channel pumps PN 16 Self-priming centrifugal pumps SOH - SOHB - SOHM Technical description ATEX certified The SOH side channel pump models are available in a variety of designs. Design base plate

More information

General Catalog. A New Vision for Quality Pumps. General Catalog

General Catalog. A New Vision for Quality Pumps. General Catalog General Catalog A New Vision for Quality Pumps General Catalog 2 Tru20 is committed to only the highest quality pumping products. We produce a tremendous range of water and process pumps in order to serve

More information

RC, RCV. Helical gear pumps. 3. Design. 1. Fields of Application. 2. Operating Data. 4. Designation

RC, RCV. Helical gear pumps. 3. Design. 1. Fields of Application. 2. Operating Data. 4. Designation Type series booklet CTI-2300/01 [02-2012] RC, RCV Helical gear pumps 1. Fields of Application RC pumps are used for pumping viscous and with lubricating properties liquids without solids in applications

More information

Side channel pumps PN 16 SOH - SOHB. Self-priming centrifugal pumps. Technical description

Side channel pumps PN 16 SOH - SOHB. Self-priming centrifugal pumps. Technical description Side channel pumps PN 16 Self-priming centrifugal pumps SOH - SOHB Technical description Operating data Design Industries Media pumped: Nominal diameter: 1-1 1 /2 Flow rate: 0.3-7.5 m 3 /h Pump head: 5-155

More information

INSTALLATION, OPERATION AND MAINTENANCE INSTRUCTIONS

INSTALLATION, OPERATION AND MAINTENANCE INSTRUCTIONS INSTALLATION, OPERATION AND MAINTENANCE INSTRUCTIONS Contents Section 1. General Observations... 2 2. Operation... 4 3. Control During Operation... 5 4. Trouble Shooting... 6 5. Maintenance... 7 Please

More information

SECTION PUMPS GENERAL PUMPS PART RELATED DOCUMENTS

SECTION PUMPS GENERAL PUMPS PART RELATED DOCUMENTS SECTION 15160 - PUMPS PART 1 - GENERAL 1.01 RELATED DOCUMENTS A. Basic Requirements: Provisions of Section 15010, BASIC MECHANICAL REQUIREMENTS and Section 15030, ELECTRICAL REQUIREMENTS FOR MECHANICAL

More information

Fire Protection. FP-XA End Suction

Fire Protection. FP-XA End Suction Fire Protection FP-XA End Suction PRODUCT BULLETIN MODEL FP-XA END SUCTION CPS Model FP-XA End Suction pumps are used in a variety of fire fighting applications. These rugged and efficient centrifugal

More information

NORTHWESTERN UNIVERSITY PROJECT NAME JOB # ISSUED: 03/29/2017

NORTHWESTERN UNIVERSITY PROJECT NAME JOB # ISSUED: 03/29/2017 SECTION 23 2123 - PUMPS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections,

More information

TOE-GN / GA / GI Series. Heat transfer pumps for heat transfer oils up to 350 C and hot water up to 160 C

TOE-GN / GA / GI Series. Heat transfer pumps for heat transfer oils up to 350 C and hot water up to 160 C TOE-GN / GA / GI Series Heat transfer pumps for heat transfer oils up to 350 C and hot water up to 160 C with uncooled mechanical seals volute casing PN 16 bearing brackets 360 and 470 2 Pumps for heat

More information

Data sheet. Page: 1 / 7. ETL GG AV11D BKSBIE3M Inline pump. Operating data. Design

Data sheet. Page: 1 / 7. ETL GG AV11D BKSBIE3M Inline pump. Operating data. Design Data sheet Page: 1 / 7 Operating data Requested flow rate Requested developed head Pumped medium Ambient air temperature 20.0 C Fluid temperature 20.0 C Fluid density 998 kg/m³ Water Clean water Not containing

More information

PA SERIES END SUCTION CENTRIFUGAL PUMP SINGLE STAGE BACK PULL-OUT DIN24255 THONG FATT JAYA MACHINERY HARDWARE SDN. BHD.

PA SERIES END SUCTION CENTRIFUGAL PUMP SINGLE STAGE BACK PULL-OUT DIN24255 THONG FATT JAYA MACHINERY HARDWARE SDN. BHD. END SUCTION CENTRIFUGAL PUMP SINGLE STAGE BACK PULL-OUT DIN24255 50HZ OR 60HZ PA SERIES APPLICATIONS PA Series pumps can be used for the following services in commercial, residential, agriculture, industrial,

More information

G&L Series MPVN. High Pressure Multi-Stage Pumps. Goulds Pumps. ITT Industries

G&L Series MPVN. High Pressure Multi-Stage Pumps. Goulds Pumps. ITT Industries G&L Series MPVN High Pressure Multi-Stage Pumps www.goulds.com Goulds Pumps ITT Industries A Full Range of Product Features Performance Range: Capacities up to GPM ( m /h) Head up to feet ( m) Maximum

More information

N N O V A T I O N E F F I C I E N C Y Q U A L I T Y

N N O V A T I O N E F F I C I E N C Y Q U A L I T Y N N O V A T I O N E F F I C I E N C Y Q U A L I T Y PS For more than 60 years the name Ruhrpumpen has been synonymous worldwide with innovation and reliability for pumping technology Ruhrpumpen is an innovative

More information

Type 431, 433. Balanced bellows design. Type Cap H2. 18 Adjusting screw with bushing. 19 Lock nut. 16 Upper spring plate. 12 Spindle.

Type 431, 433. Balanced bellows design. Type Cap H2. 18 Adjusting screw with bushing. 19 Lock nut. 16 Upper spring plate. 12 Spindle. Balanced bellows design 40 Cap H2 18 Adjusting screw with bushing 19 Lock nut 16 Upper spring plate 12 Spindle 9 Bonnet 54 Spring 14 Split ring 17 Lower spring plate 55 Stud 56 Nut 8 Guide with bushing

More information

Type 455, 456. Facts. Flanged Safety Relief Valves spring loaded. The-Safety-Valve.com. US Units

Type 455, 456. Facts. Flanged Safety Relief Valves spring loaded. The-Safety-Valve.com. US Units Type 455, 456 Flanged Safety Relief Valves spring loaded US Units Facts The-Safety-Valve.com LWN 468.08-E 462.01-D 40 Cap H2 19 Lock nut 18 Adjusting screw 16 Upper spring plate 9 Bonnet 12 Spindle 54

More information

franklinwater.com 50 Hz VR SERIES Vertical Multi-Stage Pumps

franklinwater.com 50 Hz VR SERIES Vertical Multi-Stage Pumps franklinwater.com 5 Hz VR SERIES Vertical Multi-Stage Pumps 5 HZ VR SERIES VERTICAL MULTI-STAGE PUMPS Features 2 Applications 2 Pump Specifications Counter-Flange Kits Motor Specifications 4 Ordering

More information

Diaphragm Valve SISTO-C. Sterile Process Engineering PN 16 DN Type Series Booklet

Diaphragm Valve SISTO-C. Sterile Process Engineering PN 16 DN Type Series Booklet Diaphragm Valve Sterile Process Engineering PN 16 DN 6- Type Series Booklet Legal information/copyright Type Series Booklet All rights reserved. The contents provided herein must neither be distributed,

More information

DMX and DMXD Pumps. Date goes here

DMX and DMXD Pumps. Date goes here DMX and DMXD Pumps Date goes here 1 TYPE DMX AND DMDX PUMPS Flowserve Main Menu Introduction Features and Benefits Hydraulic Range and Capabilities Testing Capability Applications Summary 2 Introduction

More information

Story of 3 R s. Pum pen Intel 1 ligen z

Story of 3 R s. Pum pen Intel 1 ligen z Story of 3 R s Pum pen Intel 1 ligen z Various Standard for End Suction Pumps Pum pen Intel 2 ligen z Comparison of ET & NL Options ET NL MoC Beyond Cat A & B Yes No MoC Variants within Cat A & B Yes No

More information

50 to 250 GPM Submersible Pumps For Six-Inch Wells. 325 & 400 GPM Submersible Pumps For Eight-Inch Wells

50 to 250 GPM Submersible Pumps For Six-Inch Wells. 325 & 400 GPM Submersible Pumps For Eight-Inch Wells FW5 39B Supersedes 39 5 to 25 GPM Submersible Pumps For Six-Inch Wells & GPM Submersible Pumps For Eight-Inch Wells Series 6P, 6T and 8T High capacity six or eight inch submersible pumps for commercial,

More information

Circulator Pumps with Continuously Variable Differential Pressure Control and I.R. Interface for Remote Control

Circulator Pumps with Continuously Variable Differential Pressure Control and I.R. Interface for Remote Control Type series booklet 1115.52/2-10 Riotec r /Riotec r Z Circulator Pumps with Continuously Variable Differential Pressure Control and I.R. Interface for Remote Control Riotec Riotec Z Energy efficiency class

More information

Goulds LF 3196 i-frame. Low Flow ANSI Process Pump with i-alert Patented Intelligent Monitoring

Goulds LF 3196 i-frame. Low Flow ANSI Process Pump with i-alert Patented Intelligent Monitoring Goulds LF 3196 i-frame Low Flow ANSI Process Pump with i-alert Patented Intelligent Monitoring 2 LF 3196 i-frame Low Flow ANSI Process Pumps Designed for Total Range of Industry Services Capacities to

More information

SIHI LPH-X - Liquid Ring Vacuum Pump Two Stage

SIHI LPH-X - Liquid Ring Vacuum Pump Two Stage - Liquid Ring Vacuum Pump Two Stage LPH 45008, LPH 45311, LPH 45316 Pressure Range: Suction Volume: 33 to 1013 mbar 55 to 258 m³/h CONSTRUCTION Sterling SIHI liquid ring vacuum pumps have a simple but

More information

Sealless magnetic coupled centrifugal pump Type NMR Design with heavy duty oil lubricated bearing bracket. our. contribution for

Sealless magnetic coupled centrifugal pump Type NMR Design with heavy duty oil lubricated bearing bracket. our. contribution for Sealless magnetic coupled centrifugal pump Type NMR Design with heavy duty oil lubricated bearing bracket our contribution for environmental protection GENERAL DICKOW-pumps of series NMR are sealless centrifugal

More information

TOE-MN / MA / MI Series. Heat transfer pumps for heat transfer oils up to 350 C

TOE-MN / MA / MI Series. Heat transfer pumps for heat transfer oils up to 350 C TOE-MN / MA / MI Series Heat transfer pumps for heat transfer oils up to 350 C with magnetic coupling volute casing PN 16 bearing brackets 360 and 470 2 Pumps for heat transfer technology Main applications

More information

Goulds High-Pressure Multi-Stage Pumps

Goulds High-Pressure Multi-Stage Pumps Goulds 3311 High-Pressure Multi-Stage Pumps Goulds Model 3311 Multistage Pumps Designed for a Wide Range of High Pressure Services Goulds Model 3311 is a radial split, segmented ring multistage pump...

More information

IPVP High-pressure Internal Gear Pumps for Variable Speed Drives Technical Data Sheet

IPVP High-pressure Internal Gear Pumps for Variable Speed Drives Technical Data Sheet IPVP High-pressure Internal Gear Pumps for Variable Speed Drives Technical Data Sheet Design and Function 7 6 5 9 2 8 2 9 4a 4b 3 Pinion shaft 2 Internal gear 3 Filler pin 4a Filler segment carrier 4b

More information

Hydraulic Motor (Radial Piston, Multi-Stroke)

Hydraulic Motor (Radial Piston, Multi-Stroke) Industrial Hydraulics Electric Drives and Controls inear Motion and ssembly Technologies Pneumatics Service utomation Mobile Hydraulics Hydraulic Motor (Radial Piston, Multi-Stroke) RE 15 08/10.94 1/8

More information

DARTMOUTH COLLEGE DESIGN February 15, 2006 & CONSTRUCTION GUIDELINES

DARTMOUTH COLLEGE DESIGN February 15, 2006 & CONSTRUCTION GUIDELINES PART 1 - DESIGN DIRECTIVES 1.1 SUMMARY SECTION 15160 PUMPS A. Related Sections: The following sections contain requirements that relate to this section: 1. DC Standards ELECTRICAL REQUIREMENTS FOR MECHANICAL

More information

Goulds Small Capacity Double Suction Pump

Goulds Small Capacity Double Suction Pump Goulds 3410 Small Capacity Double Suction Pump 3410 Double Suction Pumps Designed for a Wide Range of Industrial, Municipal, Capacities to 7,000 GPM (1591 m3/h) Heads to 550 feet (168 m) Temperatures to

More information

Specially designed low-maintenance control valves for a wide range of applications in water circulation

Specially designed low-maintenance control valves for a wide range of applications in water circulation SEMPELL Specially designed low-maintenance control valves for a wide range of applications in water circulation Features and benefits modular design the valve is suitable for continuous operation good

More information

Vertical Pumps for the Oil & Gas Industry

Vertical Pumps for the Oil & Gas Industry Vertical Pumps for the Oil & Gas Industry Lenntech info@lenntech.com Tel. +31-152-610-900 www.lenntech.com Fax. +31-152-616-289 ITT API Expert ITT Commitment ITT is committed to the Oil and Gas market,

More information

Model 3550 ASME/ANSI B73.1M Industrial Process Pumps

Model 3550 ASME/ANSI B73.1M Industrial Process Pumps 3500 Series Model 3550 ASME/ANSI B73.1M Industrial Process Pumps The Aurora Model 3550 was designed to perform in the toughest industrial applications whether in the chemical, petro-chemical, mining, pulp

More information

SUGGESTED SPECIFICATIONS

SUGGESTED SPECIFICATIONS PART 1 - GENERAL 1.01 SCOPE A. Pumps to be supplied under this specification shall be of a severe duty, recessed cupped impeller design suitable for use in (SLUDGE, GRIT, ETC. APPLICATIONS) with a 20 year

More information

GRUNDFOS DATA BOOKLET MTS. Screw pumps 50/60 Hz

GRUNDFOS DATA BOOKLET MTS. Screw pumps 50/60 Hz GRUNDFOS DATA BOOKLET MTS Screw pumps / Hz Contents Introduction MTS 3 Performance range - MTS, Hz 4 Performance range - MTS, Hz 5 Performance range - MTS, Hz 5 General description Main applications 6

More information

VERTICAL MULTI-STAGE PUMPS

VERTICAL MULTI-STAGE PUMPS VR SERIES - 6 HZ FEATURES All 316 stainless steel hydraulic components for superior durability, efficiency, and performance over a wide variety of applications Rugged NEMA motor mounting with oversized

More information

Thermoplastic Centrifugal pump, Type NM

Thermoplastic Centrifugal pump, Type NM Thermoplastic Centrifugal pump, Type NM acc. to DIN 24256, EN 22858 and ISO 2858 Size: 32-125 up to 150-400 Capacity Q: up to 450 m 3 / h Head H: up to 100 m Operating temperature t: PE up to + 70 C PP

More information

Figure 15: FPH & FPHP 3542 and FPH 3552 Assembly

Figure 15: FPH & FPHP 3542 and FPH 3552 Assembly 18 Figure 15: FPH & FPHP 3542 and FPH 3552 Assembly 1. Impeller Nut 2. Cover Nut 3. Cover Gasket 4. Housing Stud 5. Pump Housing 6. Impeller 7. Impeller Key 8. Rotating Seal o-ring 9. Seal Driver 10. Rotating

More information

The ELM Series Slurry Pump Installation and Operating Manual

The ELM Series Slurry Pump Installation and Operating Manual The ELM Series Slurry Pump Installation and Operating Manual Excellence Pump Industry Co., Ltd. SAFETY INFORMATION The following safety information relating to pump operation and maintenance should be

More information

20EVP-A SERIES. Vertical In-Line Self-Priming Centrifugal Pumps for Petroleums and Solvents. Marlow Pumps. Marlow Pumps.

20EVP-A SERIES. Vertical In-Line Self-Priming Centrifugal Pumps for Petroleums and Solvents. Marlow Pumps. Marlow Pumps. 2EVP-A SERIES Vertical In-Line Self-Priming Centrifugal Pumps for Petroleums and Solvents PUMP: Heavy-duty cast iron construction, with 2 NPT female threaded, in-line suction and discharge ports. This

More information

MD High Pressure Stage Casing Pump

MD High Pressure Stage Casing Pump MD High Pressure Stage Casing Pump Sulzer Pumps Sulzer Pumps is a leading global supplier of reliable products and innovative pumping solutions for end users. Our active research and development, detailed

More information

Discharge diameters 1.5", 2", 3", 4", 5", 6", 8", 10", 12" & 14" HP 1 to 500. Split Coupled Vertical In-Line Pumps BVL

Discharge diameters 1.5, 2, 3, 4, 5, 6, 8, 10, 12 & 14 HP 1 to 500. Split Coupled Vertical In-Line Pumps BVL Discharge diameters 1.5", 2", 3", 4", 5", 6", 8", 10", 12" & 14" HP 1 to 500 Split Coupled Vertical In-Line Pumps BVL Split Coupled Vertical In-Line Pumps Capacities up to 12,000 GPM Heads up to 560 ft

More information

griswold 811 performance curves

griswold 811 performance curves griswold 811 performance curves pump size rpm page # 1 1/2 x 1-6AA 1800 1 3600 1 3 x 1 1/2-6AB 1800 1 3600 1 3 x 2-6AC 1800 1 3600 1 LF 1 1/2 x 1-8AA 1800 2 3600 2 1 1/2 X 1-8AA 1800 2 3600 2 3 X 1 1/2-8AB

More information

Lowara. Centrifugal Electric Pumps Manufactured in AISI 316 Stainless Steel in Compliance with EN 733. SH Series. 60 Hz

Lowara. Centrifugal Electric Pumps Manufactured in AISI 316 Stainless Steel in Compliance with EN 733. SH Series. 60 Hz Centrifugal Electric Pumps Manufactured in AISI 316 Stainless Steel in Compliance with EN 733 SH Series 60 Hz SERIE SH HYDRAULIC PERFORMANCE RANGE AT 60 Hz WEB 10-2006 2 CONTENTS 5 Specifications... 6

More information

HORIZONTAL SPLIT CASE SINGLE STAGE DOUBLE SUCTION Type AE CHECKING LIST

HORIZONTAL SPLIT CASE SINGLE STAGE DOUBLE SUCTION Type AE CHECKING LIST Section Tab 1200 SINGLE STAGE DOUBLE SUCTION Section 1210 List Prices Removed 07-01-02 Use Rapid Section 1220 Data Page 0.1 & (Blank)(03-30-07) 1 & 2 (03-30-07) 2.1 & 2.2 (03-30-07) 2.21 & 2.22 (03-30-07)

More information

TYPE PC Propeller Condensate Pumps

TYPE PC Propeller Condensate Pumps SHIPPENSBURG PUMP CO. INC. P.O. BOX 279, SHIPPENSBURG, PA 17257 PH 717-532-7321 FAX 717-532-7704 WWW.SHIPCOPUMPS.COM BULLETIN 103 Revised 8/17 TYPE PC Propeller Condensate Pumps with Cast Iron Receivers

More information

PS/PSL Centrifugal pumps

PS/PSL Centrifugal pumps 1 14 EN Centrifugal pumps Technical Data Delivery rate Q max = 1250 l/min Delivery head H max = 110 m Delivery temperature T = 0 C to + C Kinematic viscosity ν max = 30 mm 2 /s Quality Management DIN EN

More information

IPVS High-pressure Internal Gear Pumps Technical Data Sheet

IPVS High-pressure Internal Gear Pumps Technical Data Sheet IPVS High-pressure Internal Gear Pumps Technical Data Sheet Functional Drawing 5 9 2 8 2 9 4a 4b 3 Pinion shaft 2 Internal gear 3 Filler pin 4a Filler segment carrier 4b Filler sealing segment 5 Axial

More information

BBT/BBT-D Two Stage Radially Split Between Bearings Process Pump API 610, 9th Edition (ISO 13709)

BBT/BBT-D Two Stage Radially Split Between Bearings Process Pump API 610, 9th Edition (ISO 13709) BBT/BBT-D Two Stage Radially Split Between Bearings Process Pump API 610, 9th Edition (ISO 13709) Sulzer Pumps Sulzer Pumps combines more than 135 years of experience in pump development and manufacturing

More information

Side Channel Pumps CEH CEH 1202/ /7 TECHNICAL DATA. Temperature: max. 180 C Casing pressure: PN 40

Side Channel Pumps CEH CEH 1202/ /7 TECHNICAL DATA. Temperature: max. 180 C Casing pressure: PN 40 Side Channel Pumps CEH 1201... 6108 CEH 1202/7... 6107/7 TECHNICAL DATA Output: Delivery head: Speed: max. 35 m³/h max. 354 m max. 1800 rpm Temperature: max. 180 C Casing pressure: PN 40 Shaft sealing:

More information

Radial piston pump, fixed displacement

Radial piston pump, fixed displacement Radial piston pump, fixed displacement RE 11260/08.05 Replaces: 07.02 1/8 Type R4 izes 0.40 to 2.00 cm 3 Component series 1X Maximum operating pressure 700 bar R4_d R4-1X/1,00-450WA01M01 Table of contents

More information

IPV catalog High-pressure internal gear pumps

IPV catalog High-pressure internal gear pumps Voith Turbo IPV catalog High-pressure internal gear pumps Benefits that convince Internal gear pumps from Voith Turbo are working reliably in hundreds of thousands of machines worldwide. Sophisticated

More information

ITT. Goulds Pumps. Marlow Series 20EVP. Engineered for life. Commercial Water

ITT. Goulds Pumps. Marlow Series 20EVP. Engineered for life. Commercial Water Goulds Pumps Marlow Series 2EVP Vertical In-Line Self-Priming Centrifugal Pumps for Petroleums and Solvents STANDARD UNIT INCLUDES: Goulds Pumps is a brand of ITT Corporation. www.goulds.com Engineered

More information

Goulds Lenntech. API th Edition / ISO nd Edition API BB2 Two-Stage, Between-Bearing, Radially Split

Goulds Lenntech. API th Edition / ISO nd Edition API BB2 Two-Stage, Between-Bearing, Radially Split Goulds 3640 API 610 11 th Edition / ISO 13709 2 nd Edition API BB2 Two-Stage, Between-Bearing, Radially Split Lenntech info@lenntech.com Tel. +31-152-610-900 www.lenntech.com Fax. +31-152-616-289 Goulds

More information