ANSI Valve Standards. API Valve Standards
|
|
|
- Earl Warner
- 6 years ago
- Views:
Transcription
1 ANSI Valve s ANSI - the American National s Institute standardization and conformity assessment system. Code Name ANSI A126 ANSI A181 ANSI ANSI ANSI Grey iron castings for valves flanges and pipe fittings specifications for forged or rolled steel pipe flanged forged fittings and valves and parts for general service Face - to - face and end - to - end dimension of ferrous valves Steel valves Constant - level oil valves API Valve s API - American Petroleum Institute valve standards: Code Name API API SPEC60 API ST060 API ST060 API SPE140 API 526 API 527 API 528 API 529 API 594 API 595 Supplement 1 to api spec 60 (sixteenth edition ) specification for pipeline valves Steel gate plug ball and check valves for pipeline service API Specification for flanged steel gate and plug valves for drilling and production service API Specification for wellhead surface safety valves for offshore service Flanged steel safety relief valves Commercial seat tightness of safety relief valves with metal - to metal seats API standard for safety relief valve nameplate nomenclature Cast - forged Steel plug valves flanged ends Wafer - type check valves Cast - iron gate valves flanged ends
2 API 597 API 598 API 599 API 600 API 602 API 603 API 604 API 607 API 609 API SPEC 6FA API SPEC 6FC API 8ULL 6RS API RP 11V6 API RP 11V7 API RP 520 PT 1 API RP 574 API RP 576 API ST0 608 Steel venturi gate valves flanged or butt welding ends Valve inspection and test Steel plug valves flanged or butt welding ends Flanged and butt - welding - end steel gate and plug valves for refinery use Compact design carbon steel gate valves for refinery use pound light - wall corrosion - resistant gate valves for refinery use 0uctile iron gate valves flanged ends Fire - resistant testing of ball valves with soft contact faces 8utterfly valves to 150 psig and 150 F Specification for fire test for valves Specification for fire test for valves with automatic backseats 8ulletin on referenced standards for committee 6, standardization of valves and wellhead equipment Recommended practice for design of continuous flow gas lift installations using injection pressure operated valves first edition Recommended practice for repair, testing, and setting gas lift valves Sizing, selection and installation of pressure relieving devices in refineries part 1- sizing and selection Inspection of piping, tubing, valves and fittings first edition, replaces guide for inspection of refinery equipment Chapter XI Inspection of pressure-relieving devices first edition Metal ball valves-flanged, threaded and welding end ASME Valve s The American Society of Mechanical Engineers, ASME valves standards: A105/105M Specification for Carbon Steel Forgings for piping applications A181/181M Specification for Carbon Steel Forgings for General purpose piping
3 Specification for forged or rolled alloy-steel A182/182M pipe flanges, forged fittings and valves and parts for high-temperature service A727/727M A F885 F992 F993 F1020 F1098 F1271 F1370 F1508 F1565 F1792 F1793 specification for carbon steel forgings for piping components with inherent notch toughness. Specification for Common Requirements for Steel Flanges, Forged Fittings, valves, and Parts for Piping Applications Specification for Forged or Rolled UNS N08020, UNS N08024, UNS N08026, UNS N08367, and UNS R20033 Alloy Pipe Flanges, Forged Fittings, and Valves and Parts for Corrosive High-Temperature Service Specification for Pressure Consolidated Powder Metallurgy Iron-Nickel- Chromium- Molybdenum (UNS N08367) and Nickel- Chromium Molybdenum Columbium (Nb) (UNS N06625) Alloy Pipe Flanges, Fittings, Valves, and Parts Test Method for Vehicle Evaluation of Unleaded Automotive Spark-ignition Engine Fuel for Intake Valve 0eposit Formation Specification for Envelope 0imensions for 8ronze Globe Valves NPS 1/4 to 2 El-1996 R(1996) Specification for Valve Label Plates El-1997 R(1997) Specification for Valve Locking 0evices El R(1997) Specification for Line-8lind Valves for marine Applications El-1996 RI'1996) Specification for Envelope 0imensions for Butterfly Valves - NPS 2 to 24 EI-1993 R(1993) Specification for Spill Valves for Use in Marine Tank Liquid Overpressure Protections Applications EI-1995 R (1995) Specification for Pressure Reducing valves for Water Systems, Shipboard Specification for Angle Style, Pressure Relief Valves for Steam, Gas, and Liquid Services Specification for Pressure-Reducing Valves for Steam Service Specification for Special Requirements for Valves Used in Gaseous Oxygen Service Specification for Automatic Shut-Off Valves (Also Known as Excess Flow Valves, EFV) for Air or Nitrogen Service Specification for Hand operated, Globe-Style
4 F1795 A230 A232 A350 A338 A694 A404 A522 Valves for Gas (Except Oxygen Gas), and Hydraulic Systems standard Specification for Pressure-Reducing Valves for Air or Nitrogen Systems specification for steel wire oil - tempered carbon valve spring quality specification for chromium - vanadium alloy steel valve spring quality specification for forged or rolled carbon and alloy steel flanges forged fittings and valves and parts for low - temperature service specification for ultrasonic examination of heavy steel forgings specification for forgings carbon and alloy steel for pipe flanges fittings valves and parts for high - pressure transmission service s specification for forged or rolled alloy - steel pipe flanges forged fittings and valves and parts specially heat treated for high temperature service Forged or rolled 8% and 9% nickel alloy steel flanges fittings valves and parts for low - temperature service
5 ISO Valve s ISO - International Organization for ization, International s for business, government and society. ISO 4126 ISO 5208 ISO 5209 Safety Valves - General Requirements Industrial Valves - Pressure Testing For Valves General Purpose Industrial Valves - marking ISO 5210 Pt.1 Multi -turn valve actuator attachment - part 1.flange dimensions ISO 5210 Pt.2 Multi - turn valve actuator attachment part 2. Flange and coupling performance ISO 5210 pt.3 ISO 5211 pt.1 Multi - turn valve actuator attachment - part 3.dimensions of driving components Part - turn valve actuator attachment - part 1.flange dimensions ISO 5211 pt.2 Part - turn valve actuator attachment - part 2. Flange and coupling performance ISO 5211 pt.3 Part - turn valve actuator attachment - part 3. Dimensions of driving components Metal valves for use in flanged pipe systems - ISO 5752 ISO 5996 ISO 6002 ISO 6552 ISO 6553 ISO 6554 ISO 6704 ISO 6948 ISO 7121 ISO 7259 ISO 7841 Metal valves for use in flanged pipe systems - face - to - face and centre - to - face dimensions Cast iron gate valves 8olted bonnet steel gate valves Automatic steam traps - definition of technical terms Automatic steam traps - marking Flanged automatic steam traps - face - to - face dimensions Automatic steam traps - classification Automatic steam traps - production and performance characteristics tests Fourth draft proposal for flanged and butt -weld end steel ball valves Predominantly key operated cast iron gate valves for underground use Steam loss tests
STANDARDS and SPECIFICATIONS
ANSI (American National Standards Institute) ANSI B31.4 - Liquid petroleum transportation piping system. ANSI B31.4 - Gas transmission and distribution piping system. API (American Petroleum Institute)
Standards Pertaining to Valves Used in the Oil & Gas Industry
PDHonline Course M159 (2 PDH) Standards Pertaining to Valves Used in the Oil & Gas Industry Instructor: Peter Smith, HNC (Mech) 2012 PDH Online PDH Center 5272 Meadow Estates Drive Fairfax, VA 22030-6658
PRIMARY VALVE STANDARDS
ADELAIDE BRISBANE PERTH PRIMARY VALVE STANDARDS MAJOR VALVE STANDARDS PETROCHEMICAL AND REFINING INDUSTRY API 600 Steel Valves - Flanged & Buttwelding Ends API 600 is the main steel gate valve specification.
VMA Presentation Pressure Seal (MSS-SP-144) and ASME B Update Carlos E. Davila, PE March 2014
VMA Presentation Pressure Seal (MSS-SP-144) and ASME B16-2013 Update Carlos E. Davila, PE March 2014 CRANE FLUID HANDLING Fugitive Emissions Update EPA has been reducing the allowable fugitive emissions
Trunnion Ball Valves
Trunnion Ball Valves Trunnion Classification and Operating range TRUNNION type ball valves are cut off devices suitables for use both on natural gas distribution network and for liquid service when high
Forged 3 Piece Trunnion Mounted Ball Valves Series PL
Forged 3 Piece Trunnion Mounted Ball Valves Series PL Construction: 3 piece bolted side entry Trunnion housings 4 Trunnion retainer plates 6 Standard single piece seating SPE & DPE Special scraping 3 piece
PRODUCT NEWS CAT.NO.-70 KPC CORPORATION FLOW CONTROL DIVISION
PRODUCT NEWS CAT.NO.-70 CERTIFIED TO ISO 9001 KPC CORPORATION FLOW CONTROL DIVISION Internal or External Trunnion Design KPC Construction Features BODY GASKET The tongue - and - groove body gasket maximizes
British Standard institute-bs Valve Standards
BS 341-1:1991 Transportable gas container valves. Specification for industrial valves for working pressures up to and including 300 bar (REPLACED by BS EN 14189:2003), BS 341-3:2002), BS EN 849:1997),
GWC Italia. Proven technology for individual valve solutions worldwide HIGH PERFORMANCE BUTTERFLY VALVE HPB-1003
w w w. g w c i t a l i a. c o m GWC Italia Proven technology for individual valve solutions worldwide HIGH PERFORMANCE BUTTERFLY VALVE HPB-1003 1 1 GWC ITALIA Proven technology for individual valve solutions
PRIMARY VALVE STANDARDS
ADELAIDE BRISBANE PERTH PRIMARY VALVE STANDARDS MAJOR VALVE STANDARDS PETROCHEMICAL AND REFINING INDUSTRY API 600 Steel Valves - Flanged & Buttwelding Ends API 600 is the main steel gate valve specifi
SECTION GENERAL-DUTY VALVES FOR HVAC. A. Section includes valves for building services piping.
SECTION 23 05 23 GENERAL-DUTY VALVES FOR HVAC PART 1 - GENERAL 1.1 SUMMARY A. Section includes valves for building services piping. 1.2 REFERENCES A. AGA Z21.22 (American Gas Association) - Relief Valves
TRUNNION BALL VALVES. TBV 7.10
TRUNNION BALL VALVES WWW.VALVE.COM TBV 7.10 ABOUT US Our mission at Universal Flow (), is to provide a quality product at a competitive price and to meet the needs and requirements of our customers in
EEMUA Discontinued Publications 17 th April 2018
EEMUA Discontinued Publications 17 th April 2018 Please see below a list publications no longer actively published by EEMUA with an explanation where relevant. Previous editions of EEMUA publications may
Butt-Weld and Flanged Type
Butt-Weld and Flanged Type MANUFACTURED BY NG Page 1 Description Cryogenic NG Specification : GVC - ACE Valve Cryogenic NG gate valves with extended cryogenic bolted bonnet according to BS 6364, OS&Y design,
TRUNNION MOUNTED BALL VALVES
TRUNNION MOUNTED BALL VALVES COMPANY PROFILE The company ARMATURY Group a.s. is a leading Czech manufacturer and distributor of industrial valves, fittings and control systems for valves. The annual production
PBV s Engineering Excellence At Work
PBV s Engineering Excellence At Work The PBV Series 5700/6700 Three-Piece, Side-Entry, Trunnion Ball Valve 2"- 56" ANSI Class 150/300,600,900,1500 & 2500 In Full And Standard Port PBV trunnion ball valves
ALC-3 BUTTERFLY VALVES NOMINAL PRESSURE NOMINAL SIZE MATERIALS CONNECTIONS DESIGN. ANSI Class PN DN
BUTTERFLY VALVES ALC-3 NOMINAL PRESSURE ANSI Class 150-600 PN 10-100 NOMINAL 2-80 DN 50-2000 MATERIALS Cast Iron Carbon Steel Low Alloy Steel CONNECTIONS Wafer Lugged Flanged Butt Weld DESIGN Eccentric
Gate Valve (Model 1000)
Gate Valve (Model 1000) s: - 2 to 24 (50mm to 600mm) Rating: - Class 150 to Class 2500 Cast Steel Valves Flange End But-Weld End Information:- www.invacovalves.com sandesh@invacovalves.com invacovalves@gmail.com
Slab & Double Expanding Gate Valves
Slab & Double Expanding Gate Valves Double Expanding Characteristics The main feature of a double expanding gate valve is the 2 pieces obturator that guarantees a simultaneous mechanical seal both in the
GWC Italia. Proven technology for individual valve solutions worldwide NGV-1002
GWC Italia Proven technology for individual valve solutions worldwide needle valves gauge valves NGV-1002 GWC ITALIA Proven technology for individual valve solutions worldwide GWC Italia Worldwide Network
DOUBLE ECCENTRIC SOFT-SEATED Flanged and Semi-Lug Type
DOUBLE ECCENTRIC SOFT-SEATED Flanged and Semi-Lug Type MANUFACTURED BY Fire Safe LPG Page 1 Description LPG Specification : GVC - ACE Valve LPG Double Eccentric Soft Seated butterfly valve suitable low
15100 VALVES. E. Section Building Automation and Control System Guidelines
15100 VALVES PART 1: GENERAL 1.01 RELATED SECTIONS A. Section 15050 Basic Material and Methods B. Section 15545 Chilled Water System C. Section 15550 Heat Generation D. Section 15790 Coils E. Section 15955
Api Valve Standards. Api Valve Standards
We have made it easy for you to find a PDF Ebooks without any digging. And by having access to our ebooks online or by storing it on your computer, you have convenient answers with api valve standards.
Forged 3 Piece Trunnion Mounted Ball Valves Series MS
Forged 3 Piece Trunnion Mounted Ball Valves Series MS Construction: 3 piece bolted side entry Trunnion housings 4 Trunnion retainer plates 6 Metal Seated Chrome carbide and tungsten carbide trims Uni-directional
SVF FLOW CONTROLS. Series # Flanged Standard Port Fire Safe / API th Edition. Performance Engineered I N C O R P O R A T E D
Series 41 150# Flanged Standard Port Fire Safe / API-607 4 th Edition 1 PIECE REDUCED PORT BALL VALVE UNITS = INCHES SIZE CLASS 150 WEIGHTS L H W 1 1/2 11 6.50 3.86 9.06 2 21 7.01 4.65 9.06 3 40 7.99 5.98
Fully Welded Ball Valves
Ball Valves Ball Valves FULLY WELDED type ball valves are cut off devices suitables for use both on natural gas distribution network and for liquid service when high performance on thightness and low pressure
A. American National Standards Institute: 1. ANSI Z Relief Valves for Hot Water Supply Systems.
SECTION 220523 - PLUMBING VALVES PART 1 - GENERAL 1.1 SUMMARY A. Section Includes: 1. Ball valves. 2. Butterfly valves. 3. Swing check valves. 4. Spring loaded check valves. 5. Water pressure reducing
INTERNATIONAL LTD. COMPANY
Butterfly Valves for Oil&Gas and Petrochemical industry by Alex Khasin (MS (M.Sc MS M.Sc) Raphael Valves Industries Valve types Gate valves Approx. 13 % of the total valve market is covered by Gate valves
P R O D U C T R A N G E
PRODUCT RANGE OVERVIEW Range of Materials AUSTRALIAN PIPELINE VALVE BRAND Australian Pipeline Valve (APV) manufactures a complete Cast iron, Ductile iron (GGG40) range of ASME, API, BS and AS valves such
OUR ASSETS OUR SCOPE OF SUPPLY. Ball Valves Gate Valves Globe Valves Control Valves Check Valves Butterfly Valves Plug Valves Special Valves
Driving Energy Since its establishment, Ringo Válvulas has designed and manufactured its own cast and forged valves. Our experience over 30 years on the valve industry is the key of our success and recognition,
GWC Italia. Proven technology for individual valve solutions worldwide API 6D SWING CHECK VALVES SC-1002
GWC Italia Proven technology for individual valve solutions worldwide API 6D SWING CHECK VALVES SC-1002 GWC ITALIA Proven technology for individual valve solutions worldwide GWC Italia Worldwide Network
Check Valve (Model 6000)
Check Valve (Model 6000) s: - 2 to 24 (50mm to 600mm) Rating: - Class 150 to Class 2500 Cast Steel Valves Flange End But-Weld End Information:- www.invacovalves.com sandesh@invacovalves.com invacovalves@gmail.com
Quality, Safety and Environment
Quality, Safety and Environment Global Valve Center B.V. is an independent, internationally operating, modern, flexible and service-oriented organization with over forty years of experience and expertise
Butt-Weld Type (Series LGW) Flanged Type (Series LGF)
Year : Butt-Weld Type (Series GW) Flanged Type (Series GF) Page 1 Year : Description Specification : GVC globe valves with extended cryogenic bolted bonnet according to BS 6364, OS&Y design, Direct Mount
GWC Italia. Proven technology for individual valve solutions worldwide FSV-1005
GWC Italia Proven technology for individual valve solutions worldwide forged STEEL VALVES GATE, GLOBE & CHECK FSV-1005 2 GWC ITALIA Proven technology for individual valve solutions worldwide w w w. g w
The Fast-track. valves. manufacturer for valves
The Fast-track valves manufacturer for valves Introduction The valves are intended for a wide range of applications, such as oil and gas, chemical, petrochemical, energy and process industry. BSM Valves
GLOBE VALVE APPLICATION
SPECIFICATION GOBE VAVE APPICATION Globe valves are primarily use as control valves where throttling or both throttling an shut-off are require. Globe valves can also be use for on-off service; however,
PRODUCT OVERVIEW. Our BDB (Bolted Body) and BW3 (Fully Welded Body) trunnion-mounted ball valves are designed and manufactured
PRODUCT OVERVIEW For over 30 years, FluoroSeal has been manufacturing and customizing a wide range of valves, and accessories for many industries including Oil & Gas, Petrochemical, Chemical, Mining, Pharmaceutical,
VALVES & MEASUREMENT. TEXSTEAM Super G Plug Valves TEXSTEAM
TEXSTEAM Super G Plug Valves TEXSTEAM 2 TEXSTEAM TABLE OF CONTENTS Introduction... 4 Design Standards... 5 Parts List... 6 Accessories and Repair Kits... 7 Reduced Port Dimensions and Weights... 8 Full
D I S T R I B U T E D V A L V E S. Super G Lubricated-Non-Lubricated Plug Valve TEXSTEAM
Super G Lubricated-Non-Lubricated Plug Valve SUPER G EXCLUSIVE FEATURES Built and tested in accordance with API 6A, API 6D & B16. Lubricated and non-lubricated in same valve. Use it either way Metal-to
Trunnion Ball Valves
Ball Valves Ball Valves TRUNNION type ball valves are cut off devices suitables for use both on natural gas distribution network and for liquid service when high performance on thightness and low pressure
Proudly represented exclusively by: Flowlink Enterprises Pty Ltd. Phone
Proudly represented exclusively by: Flowlink Enterprises Pty Ltd sales@flowlinkepl.com.au www.flowlinkepl.com.au Phone 1300 086 499 PREAMBLE This technical document contains proprietary information belonging
HANCOCK 600 GATE, GLOBE AND CHECK VALVES FORGED STEEL
HANCOCK 600 GATE, GLOBE AND CHECK VALVES A range of ASME class 800 and 1500 reduced bore forged steel valves with screwed, socket weld, butt weld or flanged ends GATE VALVES A compact but extremely sturdy
ECOLINE GTF 800 Type Series Booklet
Gate Valve Class 800 NPS ½''-2'' Type Series Booklet Legal information/copyright Type Series Booklet All rights reserved. The contents provided herein must neither be distributed, copied, reproduced, edited
arflu globe valves The quality you can trust Globe valves Because of their configuration,
The quality you can trust globe valves 2 18 Globe valves Because of their configuration, globe valves are perfect to regulate or limit the fluid port. epending on the needs of the system, design or open
GALLI&CASSINA. Plug Valves. Conical
Conical Plug Pressure Balanced Type UPPER HOLE LOWER HOLE The Pressure Balanced Plug Contains 2 Holes: The Upper Holes Connects the Plug Port with the Area Above Plug. The Lower hole Maintains Pressure
KO Series. Cast Steel Gate Valves
FEATURES & BENEFITS Body and bonnet of Class 150 - Class 900 gate valves are usually connected with studs and nuts. The body and bonnet of Class 1500 - Class 2500 gate valves are usually a pressure sealed
Engineered Valves For Pipeline Service Application
Page 1 TRUNNION MOUNTED BALL VALVES TM SERIES Engineered Valves For Pipeline Service Application Valves for oil & gas pipelines and other industrial applications Flanged or Butt Weld ANSI Class 150 thru
88A-100 Series. Carbon Steel ANSI Class 150 Flanged Std. Port Ball Valve - 1-1/2 through 2 STANDARDS COMPLIANCE STANDARD FEATURES
Carbon Steel ANSI Class 150 Flanged Std. Port Ball Valve - 1-1/2 through 2 2. Retainer ASTM A108 Type 1215 3. Ball ASTM A108 Type 1215 Chrome Plated 9. Gland Plate 302 or 304 SS 10. Stem Nut 316 SS 11.
FASANI PRESSURE SEAL CAST GLOBE VALVES - STYLE B Y AND T PATTERN
A wide range of globe valves specifically designed for high pressure and high temperature applications, where low pressure loss is required. FEATURES GENERAL APPLICATION Our pressure seal globe valves
UNIVERSITY SERVICES ANNEX James Madison University Harrisonburg, Virginia State Project Code: Architect s Project Number:
SECTION 230523 GENERAL DUTY VALVES FOR HVAC PIPING PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Provisions of the Contract and of the Contract Documents apply to this Section. 1.2 DEFINITIONS A. The following
WENZHOU BAIJI VALVE CO.,LTD
API valves Cataloge 2006 All rights reserved by Wenzhou Baiji Valve Co.,Ltd CN. API 600 CAST STEEL VALVES COMPANY INTRODUCTION Wenzhou Baiji Valve Co.,LTD. BJ VALVES, is a diversified global supplier of
Products and Services for the Energy Industry
MC-3 DRESSER FLOW SOLUTIONS Products and Services for the Energy Industry The operations and major product lines of Dresser Flow Solutions make it an international leader in design, manufacturing and support
ISO INTERNATIONAL STANDARD. Petroleum and natural gas industries Packaged reciprocating gas compressors
INTERNATIONAL STANDARD ISO 13631 First edition 2002-08-01 Petroleum and natural gas industries Packaged reciprocating gas compressors Industries du pétrole et du gaz naturel Unités de compresseurs alternatifs
GWC Italia. Proven technology for individual valve solutions worldwide THREADED AND SOCKET WELD FLOATING BALL VALVES SBV-1002
GWC Italia Proven technology for individual valve solutions worldwide THREADED AND SOCKET WELD FLOATING BALL VALVES SBV-1002 2 GWC ITALIA Proven technology for individual valve solutions worldwide w w
The globe valves are used as a closing valve for: - noncorrosive fluids - saturated steam
The globe valves are used as a closing valve for: - noncorrosive fluids - saturated steam - oil - air - petroleum and petroleum products The Characteristics of working conditions: pressure dependency on
MSA, a.s., is an important manufacturer of industrial valves from the Czech Republic, Europe. The company manufactures and sells wide range of
API Program MSA, a.s., is an important manufacturer of industrial valves from the Czech Republic, Europe. The company manufactures and sells wide range of industrial valves for transport and processing
GL-1601C (EN) GLOBE VALVE
GL1C (EN) GLOBE VALVE ABOUT US FBV Inc. is an ISO 9001 certified company specializing in manufacturing industrial valves including ball valves, gate valves, globe valves, check valves, plug valves and
GWC Italia. Proven technology for individual valve solutions worldwide API 6D THROUGH CONDUIT SLAB & PARALLEL EXPANDING GATE VALVES PGV-1002
GWC Italia Proven technology for individual valve solutions worldwide API 6D THROUGH CONDUIT SLAB & PARALLEL EXPANDING GATE VALVES PGV-1002 GWC ITALIA Proven technology for individual valve solutions worldwide
Double Block and Bleed Plug Valves
Double Block and Bleed Plug Valves ASME Class 150 to 600 50 mm to 1050 mm (2 to 42 ) API 6D L&T Valves L&T Valves is a wholly owned subsidiary of Larsen & Toubro. Backed by a heritage of excellence that
Size: 1/4 to 3. Material: 316 Stainless Steel, Carbon Steel,
Size: 1/4 to 4 Material: 316 Stainless Steel, Carbon Steel, Alloy 20, Hastelloy C, Monel, Brass, SW, BW, BSPT, 150#, 300#, 600#, Flanged Pressure: Vacuum to 3000 PSI* -50 to 600 F* ASME B16.34 Design Bottom
GWC Italia. Proven technology for individual valve solutions worldwide API 6D THROUGH CONDUIT SLAB & PARALLEL EXPANDING GATE VALVES PGV-1002
GWC Italia Proven technology for individual valve solutions worldwide API 6D THROUGH CONDUIT SLAB & PARALLEL EXPANDING GATE VALVES PGV-1002 2 GWC ITALIA Proven technology for individual valve solutions
Dual Plate Check Valves
ORION STEEL VALVES Dual Plate Check Valves API 594 DUAL PLATE DUAL PLATE WAFER CHECK VALVES API 594 - p. 84 Class ASME 150 (PN 20) 300 (PN 50) 600 (PN 100) 900 (PN 150) 1500 (PN 250) 2500 (PN 420) DUAL
Standards are finally approved by the Standards High Council of Iranian Ministry of Petroleum.
FOREWORD This Standard is intended to be used within and for Iranian Ministry of Petroleum (N.I.O.C, N.I.G.C, N.P.C., N.I.O.R.D.C. and other affiliate organizations and companies) and has been prepared
GWC Italia. Proven technology for individual valve solutions worldwide CAST STEEL VALVES GATE, GLOBE & CHECK CSV-1004
GWC Italia Proven technology for individual valve solutions worldwide CAST STEEL VALVES GATE, GLOBE & CHECK CSV-1004 GWC ITALIA Proven technology for individual valve solutions worldwide GWC Italia Worldwide
SECTION COMMON WORK RESULTS FOR FIRE SUPPRESSION. A. Pipe, fittings, valves, and connections for sprinkler systems.
SECTION 210500 - COMMON WORK RESULTS FOR FIRE SUPPRESSION PART 1 GENERAL 1.1 SECTION INCLUDES A. Pipe, fittings, valves, and connections for sprinkler systems. 1.2 RELATED REQUIREMENTS A. Section 099000
Compact Expanding Gate. Double Disc Parallel Slide ORION STEEL VALVES API 6D API 600
ORION STEEL VALVES Compact Expanding Gate API 6D Double Disc Parallel Slide API 600 PARALLEL SLIDE COMPACT EXPANDING GATE API 6D - DOUBLE DISC PARALLEL SLIDE API 600 - p. 155 Class ASME 150 (PN 20) 300
Ball Valves SMART IN FLOW CONTROL
all Valves SMART IN FLOW CONTROL COMPANY OVERVIEW Ringo Válvulas (RV) is located in the industrial city of Zaragoza, Spain. Since its establishment RV has designed and manufactured its own cast and forged
MV1. Malaysia s 1st API 6D Ball & Gate Valves & Actuators Manufacturer. Cert. No License No. 6D-0840
MV1 Cert. No. 224939 License No. 6D-0840 0062 Malaysia s 1st API 6D Ball & Gate Valves & Actuators Manufacturer INTRODUCTION MIR VALVE Sdn. Bhd. (MIR VALVE) was incorporated on 27 December, 2006, obtained
PROJECT TITLE PROJECT NO: CONTRACT TITLE GRANT NO: UNIVERSITY OF CALIFORNIA, DAVIS CITY, CALIFORNIA
The following standard specification is intended to be edited according to the specifics of the project. Brackets [ ] and areas shaded in gray [e.g. format] indicate requirements that are optional depending
Solutions For The Oil & Gas
Bolted Bonnet Gate & Globe Crane Globe & Gate Valves are used on almost all refinery units and are available in different material options of cast steel. Gate, globe, check, globe stop-check valves are
A Long Experience in Energy Equipment and one Goal: The Customer s satisfaction. FORGED. Gate, Globe & Check Valves.
A Long Experience in Energy Equipment and one Goal: The Customer s satisfaction. FORGED Gate, Globe & Check Valves. VALVITALIA VITAS DIVISION PLANT Some production example of Forged Steel Valves 2 Valves
VB VALVES & AUTOMATION
Introduction to Valve What are Valves? Valves are mechanical device that controls the flow and pressure within a system or process. They are essential components of a piping system that conveys liquids,
NEWCO. Pressure Seal Valves. Technical Data TC9308-2
NEWCO Pressure Seal Valves Technical Data All the information contained in this manual is the exclusive property of Cameron. Any reproduction or use of the calculations, drawings, photographs, procedures
GA-1601B (EN) GATE VALVE
GA101B (EN) GATE VALVE ABOUT US FBV Inc. is an ISO 9001 certified company specializing in manufacturing industrial valves including ball valves, gate valves, globe valves, check valves, plug valves and
VALVES. A. Section HVAC Basic Materials and Methods. E. Section Building Automation and Control System Guidelines
230523 VALVES PART 1: GENERAL 1.01 RELATED SECTIONS A. Section 230500 HVAC Basic Materials and Methods B. Section 230510 Chilled Water System C. Section 230520 Heat Generation D. Section 238216 Coils E.
Lined Valves for High-corrosion and Heavy Capacity. Electronic Data Testing Centre For High Pressure Oil Gas Seal 15000PSI XMAS TREE UP DOWN TOP
Lined Valves for High-corrosion and Heavy Capacity 15000PSI XMAS TREE Electronic Data Testing Centre For High Pressure Oil Gas Seal MSP/DRILEX (China) Inc. INTRODUCTION WB Ball Valves ZN Choke Valves (Needle
PRESSURE BALANCED TYPE LUBRICATED PLUG VALVES General Index
General Index Range and Index...1 Figure Numbering...2 Materials...3-4 Pressure Testing...5 Installation, Marking and Identification...6-7 Desgin Features...8-9 Stress Analysis to the body...10 Components
Butterfly Valve. Resilient or Sleeved (Model 9400) Damper or Clearance (Model9300)
Butterfly Valve Resilient or Sleeved (Model 9400) Damper or Clearance (Model9300) Sizes: - 2 to 120 (50mm to 3000mm) Rating: - Class 150 & PN16 Wafer Type Lug Type Flanged End Information:- www.invacovalves.com
Double Block & Bleed Plug Valves
Double Block & Bleed Plug Valves ASME Class 150 & 300 50 mm to 750 mm (2 to 30 ) API 6D L&T Valves L&T Valves Limited (Formerly Audco India Limited) is a wholly owned subsidiary of Larsen & Toubro. Backed
technical description:
The gate valves are used as the closing valves for: - noncorrosive fluids - saturated steam - oil - air - petroleum and petroleum products Operating parameters are in accordance with the standard ASME
RAIMONDI TRUNNION MOUNTED FULLY WELDED BALL VALVE FIGURE 5600
The ideal valve to minimize any risk of fugitive emissions from flanges in the natural gas and oil industry FEATURES GENERAL APPLICATION The Fig. 5600 valves have been designed for gas transportation and
TM SERIES Engineered Valves For Pipeline Service Application
Tech Bulletin Page 0-1 Page 1 TRUNNION MOUNTED BALL VALVES TM SERIES Engineered Valves For Pipeline Service Application Valves for oil & gas pipelines and other industrial applications Flanged or Butt
GWC Italia. Proven technology for individual valve solutions worldwide. valve TOB-1003
w w w. g w c i t a l i a. c o m GWC Italia Proven technology for individual valve solutions worldwide triple offset butterfly valve TOB-1003 1 2 GWC ITALIA Proven technology for individual valve solutions
SECTION S DOUBLE OFFSET HIGH PERFORMANCE BUTTERFLY VALVES
SECTION S DOUBLE OFFSET HIGH PERFORMANCE BUTTERFLY VALVES DESCRIPTION STANDARD COMPLIANCE/CERTIFICATIONS S-2 ADVANTAGES S-3 PAGE SOFT SEAT EXPLODED VIEW S-4 FIRE SAFE SEAT EXPLODED VIEW S-5 METAL SEAT
PPF PIPE FITTINGS (PAHANG) BUTTWELD FITTINGS
PPF PIPE FITTINGS (PAHANG) BUTTWELD FITTINGS 1 Pahang Pipe Fittings PPF is one of the leading manufacturers of Buttweld fittings and flanges. Our highly specialized product range is capable of catering
SECTION GENERAL-DUTY VALVES FOR PLUMBING PIPING
PART 1 - GENERAL 1.1 DESCRIPTION OF WORK A. Provide labor, materials, equipment, and services necessary to install valves required to complete the work indicated on drawings. B. ASME Compliance: 1. ASME
COMPANY PROFILE 0045
0045 COMPANY PROFILE INTRODUCTION TO THE COMPANY THE MICROFINISH WAY Microfinish Valves Pvt. Ltd. is a privately owned and managed company specializing in industrial valves for energy, process, and natural
Keystone WINN Hi-Seal High Performance Butterfly Valve
m o Keystone WINN Hi-Seal High Performance Butterfly Valve Hi-Seal, high performance butterfly valves offer efficient, bi-directional sealing across a wide spectrum of service conditions Features Positive
SECTION S - DOUBLE OFFSET HIGH PERFORMANCE BUTTERFLY VALVES TABLE OF CONTENTS. Standard Compliance/Certifications S-2 Advantages S-3
SECTION S - DOUBLE OFFSET HIGH PERFORMANCE BUTTERFLY VALVES TABLE OF CONTENTS DESCRIPTION Standard Compliance/Certifications S-2 Advantages S-3 PAGE Soft Seat Exploded View S-4 Fire Safe Seat Exploded
Pig Valves. Complete Solutions for Industrial Valves NEWAY VALVE
Pig Valves Pig Valves Complete Solutions for Industrial Valves NEWAY VALVE Cat.no.:E-PV-2005 Introduction 1 Quality Commitment 2 How to Order 3 4 ~ 5 Product Introduction Material Specifications Complete
Fasani Pressure Seal Cast Gate Valves - Style A Wedge Gate and Parallel Slide
A series of robust gate valves specifically designed for applications in the power industry Features General application Our pressure seal -Style A gate valves are recommended for several applications
Table of Contents. 1900/P3 Series Exposed spring design - The spring in this design is exposed for atmospheric cooling. D through T orifice sizes.
Scope of Design Table of Contents Scope of Design...............................................................1900P.1 Materials 1900/P1 (Conventional)......................................................1900P.3
*Attachment A 1 SCOPE 1.1 This Standard covers cast copper alloy: (a) threaded pipe flanges and blind flanges having rating class designations 150, 300, 600, 900, 1500, and 2500, (b) flanged fittings having
CHECK VALVES. Bolted Bonnet - Full Opening - Pressure Seal - Wafer Dual Plate, Single Plate & Tilting Disc.
A Long Experience in Energy Equipment and one Goal: The Customer s satisfaction. CHECK VALVES Bolted Bonnet - Full Opening - Pressure Seal - Wafer Dual Plate, Single Plate & Tilting Disc. Swing Check Valves
TRICENTRIC VALVES TRICENTRIC METAL SEATED BUTTERFLY VALVE TRIPLE OFFSET
TRICENTRIC METAL SEATED BUTTERFLY VALVE Today s demanding projects require a quality valve that is reliable, cost-effective, true to specifications and most importantly, proven in the field over a wide
SAN ANTONIO WATER SYSTEM SPECIFICATIONS FOR RUBBER-SEATED BUTTERFLY VALVES 3 INCHES THROUGH 72 INCHES ANSI/AWWA C504 Class 150/250 December 2012
SAN ANTONIO WATER SYSTEM SPECIFICATIONS FOR RUBBER-SEATED BUTTERFLY VALVES 3 INCHES THROUGH 72 INCHES ANSI/AWWA C504 Class December 2012 1. SCOPE This product specification covers class rubber-seated butterfly
GUJARAT NARMADA VALLEY FERTILIZERS & CHEMICALS LIMITED 50,000 MTPA PAC PROJECT ANNEXURE 6.4 SECTION 4-07 PROCUREMENT SPECS FOR FORGED VALVES
GUJARAT NARMADA VALLEY FERTILIZERS & HEMIALS LIMITED 50,000 MTPA PA PROJET ANNEXURE 6.4 SETION 4-07 PROUREMENT SPES FOR FORGED VALVES ONTENT 1.0 GENERAL 2.0 DESIGN 3.0 TESTS 4.0 INSPETION 5.0 SHIPMENT
87A-200 Series. Stainless Steel ANSI Class 150 Flanged Full Port Ball Valve - 1/2 through 1 STANDARD FEATURES STANDARDS COMPLIANCE
Description (1/2 & 3/4 Valves) 2. Retainer ASTM A276 Type 316 3. Ball ASTM A276 Type 316 8. Stem Nut 300 Series Stainless Steel 9. Lever 300 Series Stainless Steel w/ Vinyl Grip 10. Stem Bearing RPTFE
GEOTHERMAL WELLHEAD APPLICATION RANGE. Douson Drilling and Production Equipment Co. Ltd. DOUSON GEOTHERMAL WELLHEAD
The Geothermal Wellhead GEOTHERMAL WELLHEAD Douson Drilling and Production Equipment Co. Ltd. Douson s gate valves are designed in accordance with customers requirements for high quality, high reliability