The globe valves are used as a closing valve for: - noncorrosive fluids - saturated steam
|
|
- Emily Patterson
- 5 years ago
- Views:
Transcription
1 The globe valves are used as a closing valve for: - noncorrosive fluids - saturated steam - oil - air - petroleum and petroleum products The Characteristics of working conditions: pressure dependency on temperature according to ASME B technical description: construction: The construction of cast steel globe valves of MSA is in accordance with the standard API 600, BS A spindle has got an outer thread and is either rising rotative or rising non-rorative. The standard thread of spindle is ANSI B 1., type ACME. The spindle and gland packing space meet the requirements of API 600. A spindle is placed in the head of yoke cover firmly or on ball bearings. A cover joint is executed with the help of cover s and s. The globe valves has got cast (forged variably) plow that moves in the vertical direction to a sealing seat. The seats are ed or inserted and secured with a sealing weld around the flow circumference. The minimal thickness of overlay on the sealing surfaces of seat and plow is 1,6 mm, hardness depends on the type of overlay material. The operation is with a classical or impact handwheel or in combination with an angle gear box. The sealing of spindle si executed standardly with the plaited and pressed graphited rings. The properties of globe valve packings of MSA meet the requirements of the regulation Clean Air Act, Amendment from designed dimensions: Designed dimensions of standard design are stated in the table below. material design: The globe valves are supplied in the different material variants. assembly: The globe valves can be assembled into the pipeline in a random position, but the installation into the position with a vertical spindle axis is recommended. testing: The globe valves are subjected to pressure tests acccording to API 98 on strenght and tightness, tightness of backseat, closure tightness with low pressure ( if it is required in the order), closure tightness with high pressure. order specification: Data necessary for an order: type number, nominal diameter, pressure class, design (connection), type of operation, material of inner equipment, requested tests, accompanying documentation.
2 basic standard for construction basic construction designed dimension flange dimension dimensions of welded ends testing dependence of maximal allowable pressure on temperature BS 18 73, API 600 ASME B ASME B 16. ASME B 16.2 API 98 ASME B 16.34
3 designed dimensions NPS 2" 2." 3" 4" 6" 8" 10" " 14" Class 10 designed dimensions ["] weight D D1 D2 D3 a f n d L = L1 H Z Dk d1 [kg] /4" " " /8" /4" /8" /8" /8" " 700 Dimensions of welded globe valves are specified up to nominal diameter ". NPS 2" 2." 3" 4" 6" 8" 10" " NPS 2" 2." 3" 4" 6" 8" Class 300 designed dimensions ["] weight D D1 D2 D3 a f n d L = L1 H Z Dk d1 [kg] /4" " " /8" /8" /8" /4" " 680 Dimensions of welded globe valves are specified up to nominal diameter 8". Class 600 designed dimensions ["] weight D D1 D2 D3 a f n d L = L1 H Z Dk d1 [kg] " /8" /8" /8" /4" " 6 Dimensions of welded globe valves are specified up to nominal diameter 6".
4 standard material specification 1 body 2 cover 3 plow - variants seat 6 - variants label handwheel gland flange spindle wheel cover eye pin bearing grease box guideway adjusting screw WCB 1, 2,, 8, 9, 11, 16 A 10 A 106 B M M LCC A 32 LCC A 32 LCC A 30 LF2 A 320 L7M A 194 7M A 32 LCC A 32 LCB LCB A 217 LCB A 217 LCB A 30 LF2 A 320 L7M A 194 7M WC6, 8 A 217 WC6 A 217 WC6 A 182 F9 A 217 WC6 A 182 F AISI 304 ASTM A 47, A 36 A 10, [ČSN ] A 439 D2 (Ni - Resist) ASTM A 47, A 307 Gr B carbon steel carbon steel C A 217 C A 217 C A 182 F9 A 217 C A 182 F A 182 F321 C A 217 C A 217 C A 182 F9 A 217 C trim - material according to API sealing surface of plow 2 sealing surface of seat 3 spindle 4 insert of check valve cap 6 packing box 7 latern ring 8 washer 9 pin overlay 13 Cr overlay 304 Stelit 6 overlay 13 Cr overlay 13 Cr overlay Stelit Stelit 6 Stelit 6 A T A T A T CI.4 CI.4 CI.4 9 overlay overlay A T CI.4 sealing - material design Class 1 cover sealing 10, gland packing 10, 300, 600 type of sealing spiral graphited sealing RTJ rings set of graphited cords and graphited rings (or according to customer s requirements)
5 1 body 2 cover 3 plow - variants CF8M, 16 CF8C, 16, F321 C C A 182 F321 CF3, 16 A 31 CF3 A 31 CF3 CF8, 16 A 31CF8 A 31CF8 CN7M 13, 14 A 31 CN7M A 31 CN7M Alloy 20 Gr.4A SAF M C M M A 31 CF7N A 31 CF7N 4 seat - variants Slitina label handwheel gland flange spindle wheel cover eye pin bearing grease box guideway adjusting screw AISI 304 ASTM A 47, A 36 stainless steel stainless steel stainless steel stainless steel stainless steel duplex A 439 D2 (Ni - Resist) ASTM A 47 C A 31 CF3 A 31 CF7N stainless steel stainless steel 1 sealing surface of plow 2 sealing surface of seat 3 spindle 4 insert of check valve overlay overlay 316 Slitina 20 overlay Stelit 6 Slitina Slitina 20 Stelit 6 16 overlay Stelit overlay Stelit cap 6 gland packing box Alloy 20 Alloy 20 7 latern ring 8 washer 9 pin
6 applied standards: ASME ASTM ASME API MSS NACE British standards: B 16. flange, pipeline and valve B designed dimensions B 16.2 welding ends B valves - flanged, ed and welded B screw threads, general purpose B larger steel flanged dimensions (substitute for API 60 and MSS SP-44) B 31.1 pipeline for chemical factories and refineries material specification part V,VIII, IX instrucions for vessels under pressure SPEC Q1 specification for quality systems SPEC 6D specification for pipeline valves 600 ed cover of steel gate valve for oil and gas industries Std 98 valve inspections and testing Std 89 fire-resistant sealing and sealing material SPEC L standards for pipelines SP-6 standard ends of contact surfaces for pipeline and valve flanges SP-2 standard markings for valves, flanges and connecting components SP-44 flanges fo steel pipelines SP-3 method of magnetic testing SP-4 method of radiographic testing SP- visual inspection of steel castings SP-0 graphited sealing for valves with rising spindle (constructional requirements) MR-01-7 ISO materials for H 2 S - for oil and gas industry MR materials resistant to cracking in the corrosive oil surrounding BS 1414 steel gate valve - flanged or welding ends for petrochemistry 1868 steel swing check valves - flanged or welding ends for petrochemistry 1873 steel globe valves and flanged swing check valves for petrochemistry 160 round pipe flange, flanges and valves 2080 designed dimensions 146 valve inspections and testing international standards: EN ISO 9001 ISO 211 EN ISO / API 600 ISO / API 6D ISO 208 quality system designed dimensions of actuators to valves type of document for inspection ed cover of steel gate valves for petrochemistry petrochemistry - transfer pipeline system - pipeline valves industrial valves - valve testing with pressure
7 quality system: The whole manufacturing process is completely monitored and includes the following tests and inspections: acceptance inspections of all input materials and sub-deliveries, inspections of particular components in the course of manufacture, assembly testing, pressure testing, operating testing, non-destructive testing and final inspections of finished product. testing: MSA, a.s. executes the whole range of special tests which verify the properties of valves. They are as follow: pressure testing All pressure tests are executed according to API 98, API 600, API 6D and DIN MSA, a.s. also performs standardly the special tests according to API 6D. A criterium for acceptance is zero permeability. At the same time, MSA, a.s. executes standardly testing at full operating pressure by which a possible leakage could be detected in the body-cover joint, spindle, fittings or grease box etc. fire testing Fire test is executed at MSA, a.s. according to the standard API 6FD, API 607 and BS 67, part 2, for pressure class 10, 300 and 600. testing on seal strenght Test of seal strenght is executed with methan. cycle testing Cycle test is executed by 3000 cycles (open-close) with water. hydrodynamic and aerodynamic testing MSA, a.s executes this test for the verification of hydropneumatic and aerodynamic properties. operating testing Operating test is executed on all valves at MSA, a.s. non-destructive testing MSA, a.s. executes the non-destructive test in the own facilities and testing room. The non-destructive test includes RT, MT, UT or DP testing. The testing operators are higly qualified and certified according to EN 473 or STN-TC-1A. visual inspection Visual inspection is performed at all castings that are used for the valves of MSA, a.s. according to the quality directive MSS SP- for steel castings and according to order specifications. certification: Quality system of MSA, a.s. is certified according to EN ISO 9001:2000 and API Spec Q1 (Specification D - number 0239). research and development: Specialists of MSA, a.s. work on the development and research of new products and verify their properties as well such as: - suitability of applied material - strenght and rigidity of construction (FEM method) - operability with the emphasis on strenght and controlability - hydraulic and aerodynamic properties etc. New products are tested in the testing room of MSA, a.s. as well as in real operating conditions. The properties of product are observed during the whole service life and findings are applied in the development and production of new products.
technical description:
The gate valves are used as the closing valves for: - noncorrosive fluids - saturated steam - oil - air - petroleum and petroleum products Operating parameters are in accordance with the standard ASME
More informationtechnical description:
The steel flanged and welded swing check valves are the pipeline valves, preventing automatically a working medium from the back flow. They are used for: - noncorrosive fluids - water - steam - oil - petroleum
More informationMSA, a.s., is an important manufacturer of industrial valves from the Czech Republic, Europe. The company manufactures and sells wide range of
API Program MSA, a.s., is an important manufacturer of industrial valves from the Czech Republic, Europe. The company manufactures and sells wide range of industrial valves for transport and processing
More informationGate Valve (Model 1000)
Gate Valve (Model 1000) s: - 2 to 24 (50mm to 600mm) Rating: - Class 150 to Class 2500 Cast Steel Valves Flange End But-Weld End Information:- www.invacovalves.com sandesh@invacovalves.com invacovalves@gmail.com
More informationFASANI PRESSURE SEAL CAST GLOBE VALVES - STYLE B Y AND T PATTERN
A wide range of globe valves specifically designed for high pressure and high temperature applications, where low pressure loss is required. FEATURES GENERAL APPLICATION Our pressure seal globe valves
More informationSTANDARDS and SPECIFICATIONS
ANSI (American National Standards Institute) ANSI B31.4 - Liquid petroleum transportation piping system. ANSI B31.4 - Gas transmission and distribution piping system. API (American Petroleum Institute)
More informationCheck Valve (Model 6000)
Check Valve (Model 6000) s: - 2 to 24 (50mm to 600mm) Rating: - Class 150 to Class 2500 Cast Steel Valves Flange End But-Weld End Information:- www.invacovalves.com sandesh@invacovalves.com invacovalves@gmail.com
More informationCAST STEEL GATE VALVE
CAST STEEL GATE VALVE DESIGN CHARACTERISTICS OF API00 CAST STEEL GATE VALVE The design of thrust bearing makes valve opened easily and flexibly. Handwheel Nut Handwheel Stem Nut Retainer Stem Nut Lubricating
More informationCast Steel. Carbon and Stainless Steel Gate, Globe and Check Valves
Cast Steel Carbon and Stainless Steel Gate, Globe and Check Valves Contents Cast Steel Standard Features 3 Testing, Modifications and Accessories Standard Product Range With DSI Zy-Gear Bevel Gear Chart
More informationANSI GATE, GLOBE AND CHECK VALVES & STRAINERS
ANSI GATE, GLOBE AND CHECK VALVES & STRAINERS INDEX 2 8 16 20 32 36 44 50 54 58 62 66 78 THE COMPANY CAST GATE VALVES CAST GATE VALVES PRESSURE SEAL CAST GLOBE VALVES CAST GLOBE VALVES PRESSURE SEAL CAST
More informationTRUNNION BALL VALVES. TBV 7.10
TRUNNION BALL VALVES WWW.VALVE.COM TBV 7.10 ABOUT US Our mission at Universal Flow (), is to provide a quality product at a competitive price and to meet the needs and requirements of our customers in
More informationThe bolted bonnet configuration achieves simultaneously the best performance and the highest safety.
The achieves simultaneously the best performance and the highest safety. Features A rugged body and bonnet design in accordance with API 600, ASME B16.34 and BS 1414. Tight shutoff performance is always
More informationBolted Bonnet Valves. (BL Series) Cast Steel. Cast Steel Bolted Bonnet Valves - BL Series
Cast Steel Bolted Bonnet Valves (BL Series) Gate Valve - BL5 Series Gate Valve Features Globe Valve - BL6 Series Globe Valve Features Swing Check Valve - BL7 Series Optional Features Model Numbers GATE
More informationGL-1601C (EN) GLOBE VALVE
GL1C (EN) GLOBE VALVE ABOUT US FBV Inc. is an ISO 9001 certified company specializing in manufacturing industrial valves including ball valves, gate valves, globe valves, check valves, plug valves and
More informationCondensed Valve Guide Gate Globe Check Ball Strainer. Warren Valve - Quality Since 1963
800.231.6969 Condensed Valve Guide Gate Globe Check Ball Strainer Warren Valve - Quality Since 1963 Gate, Globe & Check Valves #1156 #2156 #3156 Gate Globe Check Pressures Class Figure 150 - #1156 300
More informationL&T VALVES BUSINESS GROUP A
Larsen & Toubro Limited (L&T) is a US $ 5 billion engineering and construction company, with a strong presence in manufacturing, services and Information Technology. L&T was founded in 1938 by two Danish
More informationWENZHOU BAIJI VALVE CO.,LTD
API valves Cataloge 2006 All rights reserved by Wenzhou Baiji Valve Co.,Ltd CN. API 600 CAST STEEL VALVES COMPANY INTRODUCTION Wenzhou Baiji Valve Co.,LTD. BJ VALVES, is a diversified global supplier of
More informationECOLINE GTC Type Series Booklet
Gate Valve ECOLINE GTC 150-600 Class 150-600 NPS 2''-36'' Cast Steel / Stainless Steel Bolted Bonnet Flanged Ends Type Series Booklet Legal information/copyright Type Series Booklet ECOLINE GTC 150-600
More information(GATE, GLOBE, CHECK & BUTTERFLY)
Customer Focused ighest Quality Products Engineered to Exact Detail QUALITY VALVES CAST STEEL VALVES (GATE, GLOBE, CECK & BUTTERFLY) WEDGE GATE VALVES, PARALLELED DISC AND PRESSURE SEAL BONNETS Size: 1-1/2
More informationChampion Valves, Inc. DUAL DISC SPRING LOADED WAFER CHECK VALVES
Champion Valves, Inc. DUAL DISC SPRING LOADED WAFER CHECK VALVES FEATURES Light weight, versatile design 80% to 90% less than conventional full-body swing check valves Dual Disc open to 80 degrees Spring-loaded
More informationGA-1601B (EN) GATE VALVE
GA101B (EN) GATE VALVE ABOUT US FBV Inc. is an ISO 9001 certified company specializing in manufacturing industrial valves including ball valves, gate valves, globe valves, check valves, plug valves and
More informationSVF FLOW CONTROLS. Series # Flanged Standard Port Fire Safe / API th Edition. Performance Engineered I N C O R P O R A T E D
Series 41 150# Flanged Standard Port Fire Safe / API-607 4 th Edition 1 PIECE REDUCED PORT BALL VALVE UNITS = INCHES SIZE CLASS 150 WEIGHTS L H W 1 1/2 11 6.50 3.86 9.06 2 21 7.01 4.65 9.06 3 40 7.99 5.98
More informationTRIPLE-ECCENTRIC BUTTERFLY VALVES TYPE L32.8
α TRIPLE-ECCENTRIC UTTERFLY VALVES TYPE L32.8 Application Triple-eccentric butterfly valves are industrial valves, which designed to fully open or close the passage of the working medium flowing through
More informationGWC Italia. Proven technology for individual valve solutions worldwide FSV-1005
GWC Italia Proven technology for individual valve solutions worldwide forged STEEL VALVES GATE, GLOBE & CHECK FSV-1005 2 GWC ITALIA Proven technology for individual valve solutions worldwide w w w. g w
More informationNEWCO. Pressure Seal Valves. Technical Data TC9308-2
NEWCO Pressure Seal Valves Technical Data All the information contained in this manual is the exclusive property of Cameron. Any reproduction or use of the calculations, drawings, photographs, procedures
More informationPRODUCT NEWS CAT.NO.-70 KPC CORPORATION FLOW CONTROL DIVISION
PRODUCT NEWS CAT.NO.-70 CERTIFIED TO ISO 9001 KPC CORPORATION FLOW CONTROL DIVISION Internal or External Trunnion Design KPC Construction Features BODY GASKET The tongue - and - groove body gasket maximizes
More informationButterfly Valve. Resilient or Sleeved (Model 9400) Damper or Clearance (Model9300)
Butterfly Valve Resilient or Sleeved (Model 9400) Damper or Clearance (Model9300) Sizes: - 2 to 120 (50mm to 3000mm) Rating: - Class 150 & PN16 Wafer Type Lug Type Flanged End Information:- www.invacovalves.com
More informationBolted bonnet configuration
The bolted bonnet type valves are manufactured to guarantee the highest performance in the widest spectrum of oil and gas applications Features Swing check valves can fit on both horizontal and vertical
More informationw w w.fastwell.in FORGED STEEL VALVES GATE, GLOBE & CHECK PRESSURE CLASS: ASME SIZE RANGE : 1/4-3 API STANDARDS : 602 ASME B16.
A trusted name in industrial valve company FORGED STEEL VALVES GATE, GLOBE & CHECK PRESSURE CLASS: ASME 150-2500 SIZE RANGE : 1/4-3 API STANDARDS : 602 ASME B16.34 CATALOG NUMBER FFI -1004 TABLE OF CONTENTS
More informationPETRO VALVES. Gate Globe Check VALVE CATALOGUE. Subsidiary of Petro Power UK
PETRO VALVES Gate Globe Check VALVE CATALOGUE Subsidiary of Petro Power UK 2 PETRO VALVES The company 4 GATE VALVES BOLTED BONNET from Class 150 up to Class 2500 from 2 up to 36 PRESSURE SEAL from Class
More informationP R E C I S I O N E N G I N E E R E D C H E C K V A L V E S
P R E C I S I O N E N G I N E E R E D C H E C K V A L V E S SERIES T WAFER PATTERN CHECK VALVE HIGH PERFORMANCE HIGH FLOW LARGE UNOBSTRUCTED FLOW PATH RUGGED, HIGH INTEGRITY CONSTRUCTION Series T Installation
More informationRAIMONDI. High pressure forged globe valves to guarantee the pressure envelope integrity on harsh services.
Fig. 6022-6025 RAIMONDI High pressure forged globe valves to guarantee the pressure envelope integrity on harsh services. Features Forged body materials of highest quality, all in compliance with ASME
More informationSUFA WEDGE GATE VALVES CLASS 150/300/600/900/1500/2500 SUFA TECHNOLOGY INDUSTRY CO. LTD., CNNC
SUFA WEDGE GATE VALVES CLASS 150/300/600/900/1500/2500 SUFA TECHNOLOGY INDUSTRY CO. LTD., CNNC INTRODUCTION Gate valves as shut off valves are used in the industrial area most commonly today. They are
More informationCondensed Valve Guide Gate Globe Check Ball Strainer. Warren Valve - Quality Since 1963
800.231.6969 Condensed Valve Guide Gate Globe Check Ball Strainer Warren Valve - Quality Since 1963 Gate, Globe & Check Valves #1156 #2156 #3156 Gate Globe Check Sizes ½"-36" Pressures Class Figure 150
More informationNorflow Controls Industrial Valves
MATERIAL OF CONSTRUCTION FOR PRESSURE CONTAINING PARTS FOR TRIM MATERIAL Carbon Steel Forged A-105 13% Cr. Steel A-217 Gr. CA15 Carbon Steel Cast A-216 Gr. WCB, WCC AISI 10 0.15% Moly Steel Cast A-217
More informationKO Series. Cast Steel Gate Valves
FEATURES & BENEFITS Body and bonnet of Class 150 - Class 900 gate valves are usually connected with studs and nuts. The body and bonnet of Class 1500 - Class 2500 gate valves are usually a pressure sealed
More informationFig. VC900PS Design: ASME B16.34
Gate Valves Class 900 DN 50-500 (2 20 ) Carbon, Alloy and Stainless Steel PDS JC-900PS Rev.3 Fig. 900PS Design: ASME B16.34 JC Fábrica de válvulas, s.a. E-Mail: jc@jc-valves.com Internet: www.jc-valves.com
More informationVALVES AIL CAST STEEL GATE, GLOBE & CHECK AUDCO INDIA LIMITED. ASME Class mm mm (2-60 ) API 600 BS 1873 BS 1868 API 603
AIL CAST STEEL GATE, GLOBE & CHECK VALVES ASME Class 150-2500 50mm - 1500mm (2-60 ) API 600 BS 1873 BS 1868 API 603 ASME B16.34 API 6D AUDCO INDIA LIMITED Introduction AIL Cast Steel Gate, Globe and Check
More information88A-100 Series. Carbon Steel ANSI Class 150 Flanged Std. Port Ball Valve - 1-1/2 through 2 STANDARDS COMPLIANCE STANDARD FEATURES
Carbon Steel ANSI Class 150 Flanged Std. Port Ball Valve - 1-1/2 through 2 2. Retainer ASTM A108 Type 1215 3. Ball ASTM A108 Type 1215 Chrome Plated 9. Gland Plate 302 or 304 SS 10. Stem Nut 316 SS 11.
More informationGWC Italia. Proven technology for individual valve solutions worldwide CAST STEEL VALVES GATE, GLOBE & CHECK CSV-1004
GWC Italia Proven technology for individual valve solutions worldwide CAST STEEL VALVES GATE, GLOBE & CHECK CSV-1004 GWC ITALIA Proven technology for individual valve solutions worldwide GWC Italia Worldwide
More informationType K03. Gate Valve Butt-Welded, Flanged DN PN Data Sheet Edition: EN 9 / together we are strong
PN 16 100 Gate Valve Butt-Welded, Flanged Data Sheet Edition: EN 9 / 2015 MPOWER Engineering, a.s. Pod vinicí 2028/20, Modřany, 143 00 Praha 4, CZ T: +420 225 371 300, F: +420 225 371 325 E: info@mpowergroup.eu,
More informationGATE VALVES S 38 APPLICATION
APPLICATION The gate valves of this design are controlled valves used as the shut-off units in the piping system. They can be used for water, saturated and superheated steam, gases, non-aggressive liquids,
More information(GATE, GLOBE, CHECK & BUTTERFLY)
Customer Focused Highest Quality Products Engineered to Exact Detail QUALITY VALVES CAST STEEL VALVES (GATE, GLOBE, CHECK & BUTTERFLY) WEDGE GATE VALVES, PARALLELED DISC AND PRESSURE SEAL BONNETS Size:
More informationCarbon and Low Alloy Steel Valves. ASME Class 150/300/600/900/1500/2500 Gate, Globe and Check Valves, Bolted Bonnet Design
Carbon and Low Alloy Steel Valves ASME Class 150/300/600/900/1500/2500 Gate, Globe and Check Valves, Bolted Bonnet esign INEX Profile of KITZ Cast Carbon Steel Valves...1 Standard Product Range...2 Standard
More informationarflu globe valves The quality you can trust Globe valves Because of their configuration,
The quality you can trust globe valves 2 18 Globe valves Because of their configuration, globe valves are perfect to regulate or limit the fluid port. epending on the needs of the system, design or open
More informationOSV. Forged Steel Valves Technical book OSV
OSV Forged Steel Valves Technical book OSV Principles Of Company General Introduction Company History About the company OS Valves (OSV) is a subsidiary of OS Company. OSV has been inspiring our employees
More informationFasani Pressure Seal Cast Gate Valves - Style A Wedge Gate and Parallel Slide
A series of robust gate valves specifically designed for applications in the power industry Features General application Our pressure seal -Style A gate valves are recommended for several applications
More informationKVC VALVES AND PEX FITTINGS
KVC VALVES AND PEX FITTINGS 2011 KVC VALVES & PEX FITTINGS CATALOGUE 2 P a g e Table of contents 1. Cast Steel Valves..4 FIG. 272-CS-15 ( Gate ).....5 FIG. 272-CS-300 ( Gate )......6 FIG. 272-CS-600 (
More informationCOMPANY PROFILE TABLE OF CONTENT. Our products have been supplied to local and foreign customers for the following industries:
UTTERFLY VALVES TALE OF CONTENT COMPANY PROFILE The company ARMATURY Group a.s. is a leading Czech manufacturer and distributor of industrial valves, fittings and control systems for valves. The annual
More informationFull Opening Swing CHECK VALVE - API 6D
Full Opening Swing CHECK VALVE - API 6D Table of Contents: Manufacturing Range 3 Features & Benefits 4 Drawings 6 Sizes & Dimensions 8 Pressure / Temperature Reference 14 Flow Coefficients (Cv) 14 How
More informationSERVICE FEATURES CAST STEEL VALVES PRODUCTION RANGE PRODUCTION MATERIALS. Class Type UNIT : NPS GATE
API 600 Cast Steel Valves 1 SERVICE FEATURES Several trim combinations available for various services. Straight-through port design offering a good flow with minimum frictional loss and turbulence. Cast
More informationGate, Globe & Check Valves Corrosion-resistant
Gate, Globe & Check Valves Corrosion-resistant ASME Class 0 to 00 " - " (0 mm - 00 mm) API 0, ASME B. L&T Valves Trusted by the industry for over five decades, L&T Valves offers innovative products and
More informationM Series Floating Metal Seat Ball Valve
M Series Floating Metal Valve 1 M Series Floating Metal Valve Full Bore Two-piece Flanged Ends ANSI 150/300/600LB The A-T Controls M Series metal seat ball valve is designed for use in severe services
More informationABsOlute flow control. SERIES 3E // DN (6-16 ) // Oil & Gas // Power Generation // Petrochemistry
ABsOlute flow control SERIES 3E // DN 150-400 (6-16 ) // Oil & Gas // Power Generation // Petrochemistry TRIPLE OFFSET BUTTERFLY VALVES GENERAL INFORMATION GENERAL CHARACTERISTICS Triple offset design
More informationGate, Globe and Check Valves
Gate, Globe and Check Valves 1 COMPANY OVERVIEW Ringo Válvulas (RV) is located in the industrial city of Zaragoza, Spain. Since its establishment RV has designed and manufactured its own cast and forged
More informationProven technology for individual valve solutions worldwide. GWC Valve International
Proven technology for individual valve solutions worldwide FORGED STEEL VALVES GATE, GLOBE & CHECK PRESSURE CLASS: ASME 150-2500 SIZE RANGE: 1/4-3 API STANDARD: 602 ASME B16.34 Catal og Nu mb er f SV-
More informationSOFT SEATED TRUNNION MOUNTED BALL VALVES CSTS SERIES
CSTS SERIES Quality equates to the sum of Applied Science Serving the most rugged applications in the Western Canadian Sedimentary Basin Brochure CSTS Series February 2016 CSC Valves Canada Inc. operates
More informationSPIRA-TROL 1/2" to 4" ANSI Two-port KEA, KFA and KLA Control Valves
1/2" to 4" ANSI Two-port KEA, KFA and KLA Description SPIRA-TROL is a range of two-port single seat globe valves with cage retained seats conforming to ASME/ANSI standards. These valves are available in
More informationSPIRA-TROL 1/2" to 4" ANSI Two-port LEA, LFA and LLA Control Valves
1/2" to 4" ANSI Two-port LEA, LFA and LLA Description SPIRA-TROL is a range of two-port single seat globe valves with cage retained seats conforming to ASME/ANSI standards. These valves are available in
More informationFORTUNE BRASS, CARBON, STAINLESS STEEL BALL VALVES
FORTUNE BRASS, CARBON, STAINLESS STEEL BALL VALVES FORGED BRASS BALL VALVES 2-pc Full Port Forged Brass Ball Valve, Packing Gland Design, 600 WOG/150 WSP, MSS-SP-110 CSA, UL, FM, NSF61 and LP Gass Approved
More informationS6/S5-SERIES METAL-SEATED FULL- AND STANDARD-BORE MBV BALL VALVES, 1/2" 12"
S6/S5-SERIES METAL-SEATED FULL- AND STANDARD-BORE MBV BALL VALVES, 1/2" 12" Series MBV S6/S5 metal-seated ball valves meet a wide range of severe-service requirements. These valves are your best choice
More informationThe excellent performance of the pressure seal type range, is optimal in high pressure and high temperature applications.
The excellent performance of the pressure seal type range, is optimal in high pressure and high temperature applications. Features Swing check valves can fit on both horizontal and vertical (up-flow) piping.
More informationSales Agent: est William E. Williams Valve Corporation Warranty SEPT 2015
est. 1918 F ounded in 1918, William E. Williams Valve Corporation has continuously produced high quality valves for industrial and commercial applications including: oil refining, chemical processing,
More informationCast Steel Valves. General Index. Figure Number Index JENKINS -1-
Cast Valves Cast Valves SINCE 1864 General Index General Data... 2 Materials... 2 Identification... 3 Gate Valve Features... 4, 5 Globe Valve Features... 9, 10 Swing Check Valve Features... 14, 15 Pressure/Temperature
More informationP R E C I S I O N E N G I N E E R E D C H E C K V A L V E S
P R E C I S I O N E N G I N E E R E D C E C K V A L V E S SERIES X EXTENDED BODY CECK VALVE PARTS LIST ITEM PART NAME 1 BODY 2 SEAT INSERT 3 FLAPPER 4 SPRING 5 SPRING PIN 6 SEAT SEAL IG PERFORMANCE IG
More informationCAST STEEL FLANGED GATE, GLOBE, & CHECK VALVES.
CAST STEEL FLANGED GATE, GLOBE, & CHECK VALVES www.fnw.com Index Options & Accessories... 2 Standards... 2 Figure Number Matrix... 3 Pressure/Temperature Ratings... 3 Hydrostatic Test Pressures... 3 Carbon
More informationA Long Experience in Energy Equipment and one Goal: The Customer s satisfaction. FORGED. Gate, Globe & Check Valves.
A Long Experience in Energy Equipment and one Goal: The Customer s satisfaction. FORGED Gate, Globe & Check Valves. VALVITALIA VITAS DIVISION PLANT Some production example of Forged Steel Valves 2 Valves
More informationCHAMPION WAFER CHECK VALVES SIZE RANGE 2" 72" ASME CLASS MATERIALS: IRON CARBON STEEL STAINLESS STEEL ALUMINUM BRONZE ALLOY 20 MONEL NICKEL
CHAMPION WAFER CHECK VALVES SIZE RANGE 2" 72" ASME CLASS 125 2500 MATERIALS: IRON CARBON STEEL STAINLESS STEEL ALUMINUM BRONZE ALLOY 20 MONEL NICKEL CHAMPION VALVES, INC. DUAL DISC SPRING LOADED WAFER
More informationRAIMONDI. High pressure forged check valves recommended to prevent flow reversal in severe applications.
Fig. 6042 6045 RAIMONDI High pressure forged check valves recommended to prevent flow reversal in severe applications. Features High quality forged materials to guarantee pressure envelope integrity, all
More informationCE43 1" (DN25) to 4" (DN100) Carbon Steel Cage Design, Two Port Control Valves
Globe 13 CE43 1" (DN25) to 4" (DN) Carbon Steel Cage Design, Two Port Description The CE43 series is a range of carbon steel two port, cage trim, control valves conforming to ANSI B16.34, ASME VIII standards
More informationHD series. HD Series 1 technical data 1 components DN RTFE seat 2 Inconel seat 3 "FIRE SAFE" seat 4
HD series double eccentric HD Series 1 technical data 1 components DN 50-300 2 RTFE seat 2 Inconel seat 3 "FIRE SAFE" seat 4 tables dimensions 5 torque values 6 pressure / temperature 6 tests 6 Gearboxes
More informationFully Welded Ball Valves
Ball Valves Ball Valves FULLY WELDED type ball valves are cut off devices suitables for use both on natural gas distribution network and for liquid service when high performance on thightness and low pressure
More informationInternational Standard Valve, Inc Perimeter Park Drive, Bldg 320, Houston, Texas
- International Standard Valve, Inc. 7111 Perimeter Park Drive, Bldg 320, Houston, Texas 77041 713-983-7600 TM Ball Valve Product Summary is a registered trademark of International Standard Valve, Inc.
More informationForged 3 Piece Trunnion Mounted Ball Valves Series MS
Forged 3 Piece Trunnion Mounted Ball Valves Series MS Construction: 3 piece bolted side entry Trunnion housings 4 Trunnion retainer plates 6 Metal Seated Chrome carbide and tungsten carbide trims Uni-directional
More informationCarbon Steel ANSI Class 150 Flanged Full Port Ball Valve -
Description (1/2 & 3/4 Valves) Material 2. Retainer ASTM A108 Type 1215 3. Ball ASTM A108 Type 1215 8. Stem Nut 300 Series Stainless Steel 9. Lever 300 Series Stainless Steel w/vinyl Grip 10. Stem Bearing
More informationHigh performance valves for high level expectations PROUDLY MADE IN ITALY
High performance valves for high level expectations Location ERREESSE, established in 2004, is a manufacturing company based in the Northern Italy, Grignasco, a nice town in the green Valsesia (Sesia Valley),
More informationVALVOSIDER MANUFACTURER OF VALVES GATE VALVES GLOBE VALVES CHECK VALVES STRAINERS CATALOGUE
ALOSIDER GATE ALES GLOBE ALES CHECK ALES STRAINERS CATALOGUE R. 05/17 ALOSIDER s.r.l. ASME DIN ia S. Rocco, 2 - P.O. BOX 76-13011 Borgosesia (C) - Italy Phone: +39 0163 22991 - Fax: +39 0163 21537 e-mail:
More informationCast Steel Valves. General Index. Figure Number Index -1-
Cast Valves General Index Cast Valves Ordering Information... 2 General Data... 3 Materials... 4 Identification... 5 General Features... 6 Gate Valve Features... 7 NACE Trim Valves...11 Globe Valve Features...12
More informationInternational Standard Valve, Inc Perimeter Park Drive, Bldg 320, Houston, Texas Ball Valve Product Summary
International Standard Valve, Inc. 7111 Perimeter Park Drive, Bldg 320, Houston, Texas 77041 713-983-7600 Ball Valve Product Summary is a registered trademark of International Standard Valve, Inc. www.isvalve.com
More informationGALLI&CASSINA. Plug Valves. Conical
Conical Plug Pressure Balanced Type UPPER HOLE LOWER HOLE The Pressure Balanced Plug Contains 2 Holes: The Upper Holes Connects the Plug Port with the Area Above Plug. The Lower hole Maintains Pressure
More informationBALL VALVES 4Evergreen Valve
BALL VALVES 4Evergreen Valve 4E represents Excellent quality, Excellent delivery, Excellent service and all at an Excellent price. 4E valve was founded by a group of enthusiastic people with more than
More informationVANESSA SERIES 30,000 TRIPLE OFFSET VALVES* BASIC CONFIGURATION
* BASIC CONFIGURATION With a robust integral-to-body valve seat and optimized seating angles, this valve is capable of handling isolation and process control through multiple functionalities FEATURES GENERAL
More informationBall Valves. Quality Valves at Low Cost
Ball Valves Quality Valves at Low Cost Table of Contents B Series, 2, 3 PC Ball Valves Part Numbering System...3 B0: 2 PC, 000 WOG, 36SS... 4 B02: 2 PC, 2000/0 WOG, 36SS... 4 B03: 2 PC, 000 WOG, 36SS Direct
More informationTHROUGH CONDUIT VALVES TECHNICAL CATALOGUE
SITINDUSTRIE VALVO VALVES THROUGH CONDUIT VALVES Ed. 01/DIC-2004 SITINDUSTRIE reserves the right to change, without notice, 1/14 SITINDUSTRIE TRIE VALVE DIVISION We are pleased to introduce you to the
More informationSEVERE SERVICE BELLOWS SEALED VALVES EURO CHLOR TYPE 350EC.4-5
SEVERE SERVICE BELLOWS SEALED VALVES EURO CHLOR TYPE 350EC.4-5 PHÖNIX Armaturen-Werke Bregel GmbH P +49 (5693) 988-0 F +49 (5693) 988-140 info@phoenix-armaturen.de www.phoenix-armaturen.de BELLOWS SEALED
More informationPRESSURE BALANCED TYPE LUBRICATED PLUG VALVES General Index
General Index Range and Index...1 Figure Numbering...2 Materials...3-4 Pressure Testing...5 Installation, Marking and Identification...6-7 Desgin Features...8-9 Stress Analysis to the body...10 Components
More informationTrunnion Mounted Ball Valves
Trunnion Mounted Ball Valves CONTENTS Product Coding for KITZ Trunnion Mounted Ball Valves 2 Soft seated 2 Metal seated 2 Soft Seated 3-Piece Body Trunnion Mounted Ball Valves T60S Series (1) 3 Component
More informationBOLTED BONNET API 600
PACIFIC VALVES BOLTED BONNET API 600 By Subject Product Overview...2-4 Gate Valves Major Features...5 Gate Valves Optional Features...6 Materials of Construction: Gate Valves...7 Gate Valves Product Line...8-10
More informationTrunnion Ball Valves
Ball Valves Ball Valves TRUNNION type ball valves are cut off devices suitables for use both on natural gas distribution network and for liquid service when high performance on thightness and low pressure
More informationWKM 320F. Flanged floating ball valves
WKM 20F Flanged floating ball valves Contents WKM 20F Flanged Floating Ball Valves Features and benefits.................................................................... Exploded views and specifications....................................................5
More information87A-200 Series. Stainless Steel ANSI Class 150 Flanged Full Port Ball Valve - 1/2 through 1 STANDARD FEATURES STANDARDS COMPLIANCE
Description (1/2 & 3/4 Valves) 2. Retainer ASTM A276 Type 316 3. Ball ASTM A276 Type 316 8. Stem Nut 300 Series Stainless Steel 9. Lever 300 Series Stainless Steel w/ Vinyl Grip 10. Stem Bearing RPTFE
More informationTrunnion Ball Valves
Trunnion Ball Valves Trunnion Classification and Operating range TRUNNION type ball valves are cut off devices suitables for use both on natural gas distribution network and for liquid service when high
More informationStandards Pertaining to Valves Used in the Oil & Gas Industry
PDHonline Course M159 (2 PDH) Standards Pertaining to Valves Used in the Oil & Gas Industry Instructor: Peter Smith, HNC (Mech) 2012 PDH Online PDH Center 5272 Meadow Estates Drive Fairfax, VA 22030-6658
More informationOUR ASSETS OUR SCOPE OF SUPPLY. Ball Valves Gate Valves Globe Valves Control Valves Check Valves Butterfly Valves Plug Valves Special Valves
Driving Energy Since its establishment, Ringo Válvulas has designed and manufactured its own cast and forged valves. Our experience over 30 years on the valve industry is the key of our success and recognition,
More informationGhibson Italia s.r.l. via Cassola 6/ Monteveglio (BO) Italy. Butterfly valves
HD series valve HD Series 1 technical data 1 components DN 50-300 2 RTFE seat 2 Inconel seat 3 "FIRE SAFE" seat 4 dimensions 5 torque values 6 pressure / temperature 6 tests 6 Gearboxes 7 Pneumatic actuators
More informationFire Safe Design. Anti-static Device. Anti-Blowout Design. Our firm reserves the right to make any technical changes without any notice to the client.
Sealant injection at stem position Sealant injection at seat position (injection valve + check valve) Anti-Blowout Design For the sake of safety, the stem must be designed with a blow-out proof device
More informationTECHNICAL DATASHEET Pacific CSV Cast Steel Valves
brands you trust. TECNICA DATASEET Pacific CSV Cast Steel Valves Crane ChemPharma & Energy Gate, Globe and Check Features and Benefits The new Pacific CSV valves have been redesigned to improve performance
More informationSPIRA-TROL Two-port Control Valves ASME Standard KEA, KFA and KLA ½" to 8"
SPIRA-TROL Two-port Description SPIRA-TROL is a range of two-port single seat globe valves with cage retained seats conforming to ASME standard. These valves are available in three body materials in sizes
More informationIntroduction Certifications References Standards Ball Valves Trunnion Mounted Ball Vaves Product Range...
CATALOGUE CONTENTS Introduction... 3 Certifications...4-5 References Standards... 6 Ball Valves... 7 Trunnion Mounted Ball Vaves... 8 Product Range... 9 Available Design Options... 10 Quality & Testing...
More informationTrunnion Mounted Ball Valves
Trunnion Mounted Ball Valves CONTENTS Product Coding for KITZ Trunnion Mounted Ball Valves 2 Soft seated 2 Metal seated 2 Soft Seated 3-Piece Body Trunnion Mounted Ball Valves T60S Series (1) 3 Component
More information