Standards Pertaining to Valves Used in the Oil & Gas Industry
|
|
- Marilynn Richards
- 6 years ago
- Views:
Transcription
1 PDHonline Course M159 (2 PDH) Standards Pertaining to Valves Used in the Oil & Gas Industry Instructor: Peter Smith, HNC (Mech) 2012 PDH Online PDH Center 5272 Meadow Estates Drive Fairfax, VA Phone & Fax: An Approved Continuing Education Provider
2 Appendix C STANDARDS PERTAINING TO VALVES This chapter lists common USA and British standards pertaining to valves, as published in the standard indexes of the various standard organizations for Because new standards are continually issued and old standards revised or withdrawn, the validity of these standards should be verified prior to application. STANDARD ORGANIZATIONS ANSI API ASME American National Standards Institute 1819 L Street, N.W. New York, New York Telephone: , Fax: info@asme.org, website: American Petroleum Institute 1220 L Street, N.W. Washington, D.C Telephone: , Fax: info@api.org, website: The American Society of Mechanical Engineers Three Park Avenue New York, New York Telephone: infocentral@asme.org, website: 335
3 336 ASTM AWWA MSS AFNOR BSI DIN Valve Selection Handbook ASTM International 100 Barr Harbour Drive West Conhohcken, PA Telephone: , Fax: website: American Water Works Association 6666 West Quincy Avenue Denver, CO Telephone: , Fax: website: Manufacturers Standardization Society 127 Park Street N.E. Vienna, VA Telephone: , Fax: website: Association Francaise de Normalisation 11, avenue Francis de Pressense FR Saint Denis la Plaine Cedex France Telephone: , Fax: website: British Standards Institute 389 Chiswick High Road London W4 4AL United Kingdom Telephone: +44-(0) , Fax: +44-(0) website: Deutsches Institut fur Normung ev Burggrafenstrasse Berlin Germany Telephone: , Fax: postmaster@din.de, website: STANDARDS PERTAINING TO VALVE ENDS AND GENERAL VALVE STANDARDS MSS SP-6 Standard finishes for contact faces of pipe flanges and connecting-end flanges of valves and fittings.
4 Appendix C: Standards Pertaining to Valves 337 MSS SP-9 MSS SP-44 MSS SP-51 MSS SP-65 MSS SP-91 MSS SP-92 MSS SP-96 MSS SP-98 MSS SP-99 MSS SP 120 API Spec 6A API Std 605 ASME B ASME B ASME B16.1 ASME B16.5 ASME B16.20 ASME B16.21 ASME B16.24 ASME B16.25 ASME/AWWA C ASME/AWWA C BS 21 BS 1560 BS 3293 BS 4504 Spot facing for bronze, iron, and steel flanges. Steel pipeline flanges. Class 150 LW corrosion-resistant cast flanges and flanged fittings. High-pressure chemical industry flanges and threaded stubs for use with lens gaskets. Guidelines for manual operation of MSS valve user guide. Guidelines on terminology for valves and fittings. Protective coatings for the interior of valves, hydrants, and fittings. Instrument Flexible graphite packing systems for rising stem steel Wellhead and Christmas tree equipment. Large diameter carbon steel flanges. Pipe threads, general purpose (inch). Dryseal pipe threads (inch). Cast iron pipe flanges and flanged fittings. Pipe flanges and flanged fittings. Metallic gaskets for pipe flanges. Non-metallic flat gaskets for pipe flanges. Cast copper pipe flanges and flanged fittings. Butt-welding ends. Flanges for water-works service, 4 in. through 144 in. steel. Joints, grooved and shouldered type. Pipe threads for tubes and fittings where pressure-tight joints are made on the threads (metric dimensions). Steel pipe flanges and flanged fittings (nominal sizes 1 2 in. to 24 in.) for the petroleum industry. Part 2 (1970), metric dimensions. Carbon steel flanges (over 24 in. nominal size) for the petroleum industry. Flanges and bolting for pipes, valves, and fittings, metric series. Part 1 (1969), ferrous. Part 2 (1974), copper alloy and composite flanges.
5 338 Valve Selection Handbook STANDARDS PERTAINING TO GLOBE VALVES MSS SP-42 MSS SP-80 MSS SP-85 MSS SP-117 MSS SP-118 API RP 6FA ASME B16.10 ASME B16.34 BS 1873 BS 5352 BS 5152 BS 5154 BS 5160 Class 150 corrosion-resistant gate, globe, angle, and check valves with flanged and butt-weld ends. Pressure testing of steel Bronze gate, globe, angle, and check Gray iron globe and angle valves, flanged and threaded ends. Bellows seals for globe and gate Compact steel globe and check valves flanged, flangeless, threaded and welding ends. Fire test for Face-to face and end-to-end dimension of ferrous Steel valves, flanged and butt-welding end. Steel globe valves and stop and check valves (flanged and butt-welding ends), for the petroleum, petrochemical, and allied industries. Cast and forged steel wedge gate, globe, check, and plug valves, screwed and socket welding, sizes 50 mm and smaller, for the petroleum, petrochemical, and allied industries. Cast iron globe and globe stop and check valves, for Copper alloy globe, globe stop and check, check, and gate valves (including parallel slide type), for general purposes. Specification for flanged steel globe valves, globe stop and check valves, and lift-type check valves for STANDARDS PERTAINING TO PARALLEL AND WEDGE GATE VALVES MSS SP-42 MSS SP-45 MSS SP-70 Class 150 corrosion-resistant gate, globe, angle, and check valves with flanged and butt-weld ends. Bypass and drain connection standard. Pressure testing of Cast iron gate valves, flanged and threaded ends.
6 Appendix C: Standards Pertaining to Valves 339 MSS SP-80 MSS SP-81 MSS SP-117 API Spec 6D API RP 6FA API Std 595 API Std 597 API Std 598 API Std 600 API Std 602 API Std 603 ASME B16.10 ASME B16.34 BS 1414 BS 5150 BS 5154 BS 5163 BS 5352 Bronze gate, globe, angle, and check Stainless steel, bonnetless, flanged, wafer, knife gate Bellows seals for globe and gate Specification for pipeline valves, end closures, connectors and swivels. Fire test for Cast iron gate valves, flanged ends. Steel venturi gate valves, flanged or butt-welding ends. Valve inspection and test. Bolted bonnet steel gate valves for petroleum and natural gas industries. Compact carbon steel gate Corrosion-resistant, bolted bonnet gate valves flanged and butt-welding ends. Face-to-face and end-to-end dimensions of ferrous Steel valves, flanged and butt-welding end. Steel wedge gate valves (flanged and butt-welding ends) for the petroleum, petrochemical and allied industries. Cast iron wedge and double-disc gate valves, for Copper alloy globe, globe stop and check, check, and gate valves (including parallel slide type), for Double-flanged cast iron wedge gate valves for water works purposes. Cast and forged steel wedge gate, globe, check, and plug valves, screwed and socket welding, sizes 50 mm and smaller, for the petroleum, petrochemical, and allied industries. STANDARDS PERTAINING TO PLUG VALVES MSS SP-78 Pressure testing of steel Cast iron plug valves, flanged and threaded ends.
7 340 MSS SP-108 API Spec 6A API Spec 6D API RP 6FA API Std 599 ASME B16.10 ASME B16.34 BS 5158 BS 5353 Valve Selection Handbook Resilient-seated cast iron-eccentric plug Wellhead and Christmas tree equipment. Pipeline valves (gate, plug, ball, and check valves). Fire test for Metal plug valve flanged and welding ends. Face-to-face and end-to-end dimensions of ferrous Steel valves, flanged and butt-welding end. Cast iron and cast steel plug valves for general purposes. Specification for plug STANDARDS PERTAINING TO BALL VALVES MSS SP-68 MSS SP-72 MSS SP-110 MSS SP-122 API Spec 6D API Std 598 API Std 607 ASME B16.10 ASME B16.34 BS 5159 BS 5351 Pressure testing of steel High pressure butterfly valves with offset design. Ball valves with flanged or butt-welding ends for general service. Ball valves threaded, socket-welding, solder joint, grooved and flared ends. Plastic industrial ball Pipeline valves (gate, plug, ball, and check valves). Valve inspection and test. Fire test for soft-seated quarter-turn Face-to-face and end-to-end dimensions of ferrous Steel valves, flanged and butt-welding end. Cast iron carbon steel ball valves for Steel ball valves for the petroleum, petrochemical, and allied industries. STANDARDS PERTAINING TO BUTTERFLY VALVES MSS SP-67 API Std 598 API Std 609 ANSI/AWWA C Butterfly Valve inspection and test. Butterfly valves, double flanged lug-type and wafer-type. Rubber-seated butterfly
8 Appendix C: Standards Pertaining to Valves 341 STANDARDS PERTAINING TO DIAPHRAGM VALVES MSS SP-88 BS 5156 BS 5418 ISO 5209 DIN 3359 Diaphragm-type Screwdown diaphragm valves for Marking of general purpose industrial Marking of general purpose industrial Membran-Absperrarmaturen aus metallischen Werkstoffen. STANDARDS PERTAINING TO STAINLESS STEEL VALVES MSS SP-42 API Std 603 Class 150 corrosion-resistant gate, globe, angle, and check valves with flanged and butt-weld ends. Corrosion-resistant, bolted bonnet gate STANDARDS PERTAINING TO CHECK VALVES MSS SP-42 MSS SP-71 MSS SP-80 MSS SP-118 MSS SP-126 API Spec 6D API RP 6FA API Std 594 ASME B16.10 ASME B16.34 BS 1868 Class 150 corrosion-resistant gate, globe, angle, and check valves with flanged and butt-weld ends. Pressure testing of steel Gray iron swing check valves, flanged and threaded ends. Bronze gate, globe, angle, and check Compact steel globe and check valves flanged, flangless, threaded and welding ends. Steel in-line spring assisted center guided check Pipeline valves (gate, plug, ball and check valves). Fire test for Check valves: wafer, wafer-lug and double flanged type. Face-to-face and end-to-end dimensions of ferrous Steel valves, flanged and butt-welding end. Steel check valves (flanged and butt-welding ends) for the petroleum, petrochemical, and allied industries.
9 342 BS 1873 BS 5152 BS 5154 BS 5160 BS 5352 Valve Selection Handbook Steel globe and glove stop and check valves (flanged and butt-welding ends) for the petroleum, petrochemical, and allied industries. Cast iron globe and globe stop and check valves for Copper alloy globe, globe stop and check, check, and gate Specification for flanged steel globe valves, globe stop and check valves, and lift-type check valves for Cast and forged steel wedge gate, globe, check, and plug valves, screwed and socket-welding, sizes 50 mm and smaller, for the petroleum, petrochemical, and allied industries. STANDARDS PERTAINING TO PRESSURE VALVES API RP 520 API RP 521 ASME/API 526 ASME/API 527 BS 6759 Part 1 Part 2 Part 3 ISO 4126 Recommended practice for the design and installation of pressure relieving systems in refineries. Part I (1976) Design Part-II (1973) Installation. Guide for pressure relief and depressurizing systems. Flanged-steel safety relief Commercial seat tightness of safety relief valves with metal-to-metal seats. Safety Safety valves for steam and hot water. Safety valves for compressed air or inert gases. Safety valves for process fluids. Safety STANDARDS FOR THE INSPECTION AND TESTING OF VALVES MSS SP-25 Standard marking system for valves, fittings, flanges, and unions.
10 Appendix C: Standards Pertaining to Valves 343 MSS SP-53 MSS SP-54 MSS SP-55 MSS SP-82 MSS SP-93 MSS SP-94 MSS SP-111 MSS SP-121 API Spec. 6FA API Spec. 6FC API Std. 607 ASME/API 527 API Std 598 BS BS Quality standard for steel castings and forgings for valves, flanges and fittings, and other piping components magnetic particle examination method. Quality standard for steel castings for valves, flanges and fittings, and other piping components radiographic examination method. Quality standard for steel castings for valves, flanges and fittings, and other piping components visual method for evaluation of surface irregularities. Pressure testing of steel Valve-pressure testing methods. Quality standard for steel castings for valves, flanges and fittings, and other piping components liquid penetrant examination method. Quality standard for steel castings and forgings for valves, flanges and fittings, and other piping components ultrasonic examination method. Quality standard for evaluation of cast steel surface finishes visual and tactile method. Qualification testing methods for stem packing for rising stem Fire test for Fire test for valves with automatic backseats. Fire test for soft-seated quarter turn Commercial seat tightness of safety relief valves with metal-to-metal seats. Valve inspection and test. Testing of valves; Part 1: Specification for production pressure testing requirements. Testing of valves; Part 2: Specification for fire type testing requirements. MISCELLANEOUS STANDARDS PERTAINING TO VALVES BS 4371 Fibrous gland packings.
11 344 Valve Selection Handbook STANDARDS PERTAINING TO RUPTURE DISCS ASME Code, Section VIII, Division, 1, UG 125 through 136 BS 2915 Bursting discs and bursting-disc devices. ISO 6718 Bursting discs and bursting-disc devices. ANSI/NFPA 68 Explosion venting. VDI 3673 Pressure release of dust explosions.
STANDARDS and SPECIFICATIONS
ANSI (American National Standards Institute) ANSI B31.4 - Liquid petroleum transportation piping system. ANSI B31.4 - Gas transmission and distribution piping system. API (American Petroleum Institute)
More informationPRIMARY VALVE STANDARDS
ADELAIDE BRISBANE PERTH PRIMARY VALVE STANDARDS MAJOR VALVE STANDARDS PETROCHEMICAL AND REFINING INDUSTRY API 600 Steel Valves - Flanged & Buttwelding Ends API 600 is the main steel gate valve specification.
More informationANSI Valve Standards. API Valve Standards
ANSI Valve s ANSI - the American National s Institute standardization and conformity assessment system. Code Name ANSI A126 ANSI A181 ANSI 816.10 ANSI 816.34 ANSI 8127.1 Grey iron castings for valves flanges
More informationSECTION GENERAL-DUTY VALVES FOR HVAC. A. Section includes valves for building services piping.
SECTION 23 05 23 GENERAL-DUTY VALVES FOR HVAC PART 1 - GENERAL 1.1 SUMMARY A. Section includes valves for building services piping. 1.2 REFERENCES A. AGA Z21.22 (American Gas Association) - Relief Valves
More informationA. American National Standards Institute: 1. ANSI Z Relief Valves for Hot Water Supply Systems.
SECTION 220523 - PLUMBING VALVES PART 1 - GENERAL 1.1 SUMMARY A. Section Includes: 1. Ball valves. 2. Butterfly valves. 3. Swing check valves. 4. Spring loaded check valves. 5. Water pressure reducing
More informationPRODUCT NEWS CAT.NO.-70 KPC CORPORATION FLOW CONTROL DIVISION
PRODUCT NEWS CAT.NO.-70 CERTIFIED TO ISO 9001 KPC CORPORATION FLOW CONTROL DIVISION Internal or External Trunnion Design KPC Construction Features BODY GASKET The tongue - and - groove body gasket maximizes
More informationO IL & G AS INDUSTRIAL VALVES, ACTUATORS & ACCESORIES
O IL & G AS O IL & G AS License Number 6D-1724 FORGED STEEL Size Range Ball Valves API 6D / BS EN ISO 17292 Gate Valves Globe Valves API 602 / BS EN ISO 15761 Class 150-2500 / Class 800 ½ - 2 Check Valves
More informationSECTION COMMON WORK RESULTS FOR FIRE SUPPRESSION. A. Pipe, fittings, valves, and connections for sprinkler systems.
SECTION 210500 - COMMON WORK RESULTS FOR FIRE SUPPRESSION PART 1 GENERAL 1.1 SECTION INCLUDES A. Pipe, fittings, valves, and connections for sprinkler systems. 1.2 RELATED REQUIREMENTS A. Section 099000
More informationOUR ASSETS OUR SCOPE OF SUPPLY. Ball Valves Gate Valves Globe Valves Control Valves Check Valves Butterfly Valves Plug Valves Special Valves
Driving Energy Since its establishment, Ringo Válvulas has designed and manufactured its own cast and forged valves. Our experience over 30 years on the valve industry is the key of our success and recognition,
More information1.2 REFERENCES.1 American National Standards Institute (ANSI)/ American Society of Mechanical Engineers (ASME)
Issued 2005/06/01 Section 15111 Valves Bronze Page 1 of 6 PART 1 GENERAL 1.1 RELATED SECTIONS.1 Section 01355 Waste Management and Disposal 1.2 REFERENCES.1 American National Standards Institute (ANSI)/
More informationPRIMARY VALVE STANDARDS
ADELAIDE BRISBANE PERTH PRIMARY VALVE STANDARDS MAJOR VALVE STANDARDS PETROCHEMICAL AND REFINING INDUSTRY API 600 Steel Valves - Flanged & Buttwelding Ends API 600 is the main steel gate valve specifi
More informationBritish Standard institute-bs Valve Standards
BS 341-1:1991 Transportable gas container valves. Specification for industrial valves for working pressures up to and including 300 bar (REPLACED by BS EN 14189:2003), BS 341-3:2002), BS EN 849:1997),
More informationTRUNNION BALL VALVES. TBV 7.10
TRUNNION BALL VALVES WWW.VALVE.COM TBV 7.10 ABOUT US Our mission at Universal Flow (), is to provide a quality product at a competitive price and to meet the needs and requirements of our customers in
More informationtechnical description:
The gate valves are used as the closing valves for: - noncorrosive fluids - saturated steam - oil - air - petroleum and petroleum products Operating parameters are in accordance with the standard ASME
More informationGate Valve (Model 1000)
Gate Valve (Model 1000) s: - 2 to 24 (50mm to 600mm) Rating: - Class 150 to Class 2500 Cast Steel Valves Flange End But-Weld End Information:- www.invacovalves.com sandesh@invacovalves.com invacovalves@gmail.com
More informationA. This Section includes general duty valves common to several HVAC piping systems.
SECTION 23 05 23 - PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections, apply
More informationSECTION GENERAL-DUTY VALVES FOR PLUMBING PIPING
PART 1 - GENERAL 1.1 DESCRIPTION OF WORK A. Provide labor, materials, equipment, and services necessary to install valves required to complete the work indicated on drawings. B. ASME Compliance: 1. ASME
More informationSECTION GENERAL-DUTY VALVES FOR PLUMBING PIPING
SUNY GENESEO 220523-1 PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections, apply
More informationSECTION GENERAL-DUTY VALVES FOR PLUMBING PIPING
SECTION 220523 - GENERAL-DUTY VALVES FOR PLUMBING PIPING PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division
More informationMSA, a.s., is an important manufacturer of industrial valves from the Czech Republic, Europe. The company manufactures and sells wide range of
API Program MSA, a.s., is an important manufacturer of industrial valves from the Czech Republic, Europe. The company manufactures and sells wide range of industrial valves for transport and processing
More informationtechnical description:
The steel flanged and welded swing check valves are the pipeline valves, preventing automatically a working medium from the back flow. They are used for: - noncorrosive fluids - water - steam - oil - petroleum
More informationP R O D U C T R A N G E
PRODUCT RANGE OVERVIEW Range of Materials AUSTRALIAN PIPELINE VALVE BRAND Australian Pipeline Valve (APV) manufactures a complete Cast iron, Ductile iron (GGG40) range of ASME, API, BS and AS valves such
More informationThe Fast-track. valves. manufacturer for valves
The Fast-track valves manufacturer for valves Introduction The valves are intended for a wide range of applications, such as oil and gas, chemical, petrochemical, energy and process industry. BSM Valves
More informationCheck Valve (Model 6000)
Check Valve (Model 6000) s: - 2 to 24 (50mm to 600mm) Rating: - Class 150 to Class 2500 Cast Steel Valves Flange End But-Weld End Information:- www.invacovalves.com sandesh@invacovalves.com invacovalves@gmail.com
More informationSECTION VALVES PART 1 - GENERAL
1.01 RELATED DOCUMENTS SECTION 15100 VALVES PART 1 - GENERAL A. The work in this section includes the furnishing and installation of all control valves and accessories shown on the construction plans and
More informationALC-3 BUTTERFLY VALVES NOMINAL PRESSURE NOMINAL SIZE MATERIALS CONNECTIONS DESIGN. ANSI Class PN DN
BUTTERFLY VALVES ALC-3 NOMINAL PRESSURE ANSI Class 150-600 PN 10-100 NOMINAL 2-80 DN 50-2000 MATERIALS Cast Iron Carbon Steel Low Alloy Steel CONNECTIONS Wafer Lugged Flanged Butt Weld DESIGN Eccentric
More informationThe globe valves are used as a closing valve for: - noncorrosive fluids - saturated steam
The globe valves are used as a closing valve for: - noncorrosive fluids - saturated steam - oil - air - petroleum and petroleum products The Characteristics of working conditions: pressure dependency on
More informationarflu globe valves The quality you can trust Globe valves Because of their configuration,
The quality you can trust globe valves 2 18 Globe valves Because of their configuration, globe valves are perfect to regulate or limit the fluid port. epending on the needs of the system, design or open
More informationVMA Presentation Pressure Seal (MSS-SP-144) and ASME B Update Carlos E. Davila, PE March 2014
VMA Presentation Pressure Seal (MSS-SP-144) and ASME B16-2013 Update Carlos E. Davila, PE March 2014 CRANE FLUID HANDLING Fugitive Emissions Update EPA has been reducing the allowable fugitive emissions
More informationSECTION GENERAL-DUTY VALVES FOR HVAC PIPING. A. Contents of Division 23, HVAC and Division 01, General Requirements apply to this Section.
SECTION 23 05 23 PART 1 - GENERAL 1.1 SUMMARY A. Work Included: 1. Gate Valves 2. Balancing Valves 3. Ball Valves 4. Butterfly Valves 5. Swing Check Valves 1.2 RELATED SECTIONS A. Contents of Division
More informationFully Welded Ball Valves
Ball Valves Ball Valves FULLY WELDED type ball valves are cut off devices suitables for use both on natural gas distribution network and for liquid service when high performance on thightness and low pressure
More informationBrown University Revised August 3, 2012 Facilities Design & Construction Standards SECTION HVAC&R VALVES
SECTION 23 05 23 HVAC&R VALVES PART 1 - GENERAL 1.1 SUMMARY: A. Section includes valves for building services piping. 1.2 GENERAL VALVE APPLICATION REQUIREMENTS: A. Provide valve handle extensions that
More informationGWC Italia. Proven technology for individual valve solutions worldwide FSV-1005
GWC Italia Proven technology for individual valve solutions worldwide forged STEEL VALVES GATE, GLOBE & CHECK FSV-1005 2 GWC ITALIA Proven technology for individual valve solutions worldwide w w w. g w
More informationKO Series. Cast Steel Gate Valves
FEATURES & BENEFITS Body and bonnet of Class 150 - Class 900 gate valves are usually connected with studs and nuts. The body and bonnet of Class 1500 - Class 2500 gate valves are usually a pressure sealed
More informationGALLI&CASSINA. Plug Valves. Conical
Conical Plug Pressure Balanced Type UPPER HOLE LOWER HOLE The Pressure Balanced Plug Contains 2 Holes: The Upper Holes Connects the Plug Port with the Area Above Plug. The Lower hole Maintains Pressure
More informationValve Selection. 1. Function and service considerations
1. Function and service considerations Valve Selection Selection Valves serve the purpose of controlling the fluids in building services piping. Valves are produced in a variety of design types and materials.
More informationNEWCO. Pressure Seal Valves. Technical Data TC9308-2
NEWCO Pressure Seal Valves Technical Data All the information contained in this manual is the exclusive property of Cameron. Any reproduction or use of the calculations, drawings, photographs, procedures
More information15100 VALVES. E. Section Building Automation and Control System Guidelines
15100 VALVES PART 1: GENERAL 1.01 RELATED SECTIONS A. Section 15050 Basic Material and Methods B. Section 15545 Chilled Water System C. Section 15550 Heat Generation D. Section 15790 Coils E. Section 15955
More informationINTERNATIONAL LTD. COMPANY
Butterfly Valves for Oil&Gas and Petrochemical industry by Alex Khasin (MS (M.Sc MS M.Sc) Raphael Valves Industries Valve types Gate valves Approx. 13 % of the total valve market is covered by Gate valves
More informationDivision 23 - HVAC Section Switzerland Beallsville K-12 GENERAL DUTY VALVES FOR HVAC PIPING
SECTION 23 05 23 GENERAL-DUTY VALVES FOR HVAC PIPING PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and General Provisions of the Contract, including General and Supplementary Conditions and Division
More informationA Long Experience in Energy Equipment and one Goal: The Customer s satisfaction. FORGED. Gate, Globe & Check Valves.
A Long Experience in Energy Equipment and one Goal: The Customer s satisfaction. FORGED Gate, Globe & Check Valves. VALVITALIA VITAS DIVISION PLANT Some production example of Forged Steel Valves 2 Valves
More informationTrunnion Ball Valve Catalogue
Trunnion Ball Valve Catalogue Introduction "Fusion" is the registered trademark of Archmetal Industries, a member of the Fortune Group. * The Fortune Group is a world class producer of a full range of
More informationMichigan State University Construction Standards. GENERAL-DUTY VALVES FOR HVAC PIPING Page
Page 230523-1 Copyright 2005 by The American Institute of Architects (AIA) Exclusively published and distributed by Architectural Computer Services, Inc. (ARCOM) for the AIA Modified by MSU Physical Plant
More informationCHECK VALVES. Bolted Bonnet - Full Opening - Pressure Seal - Wafer Dual Plate, Single Plate & Tilting Disc.
A Long Experience in Energy Equipment and one Goal: The Customer s satisfaction. CHECK VALVES Bolted Bonnet - Full Opening - Pressure Seal - Wafer Dual Plate, Single Plate & Tilting Disc. Swing Check Valves
More informationTHROUGH CONDUIT VALVES TECHNICAL CATALOGUE
SITINDUSTRIE VALVO VALVES THROUGH CONDUIT VALVES Ed. 01/DIC-2004 SITINDUSTRIE reserves the right to change, without notice, 1/14 SITINDUSTRIE TRIE VALVE DIVISION We are pleased to introduce you to the
More informationApi Valve Standards. Api Valve Standards
We have made it easy for you to find a PDF Ebooks without any digging. And by having access to our ebooks online or by storing it on your computer, you have convenient answers with api valve standards.
More informationUnion County Vocational - Technical Schools Scotch Plains, New Jersey
SECTION 220523 - GENERAL-DUTY VALVES FOR PLUMBING PIPING PART 1 - GENERAL 1.1 SUMMARY A. Section Includes: 1. Brass ball valves. 2. Iron swing check valves. 3. Iron gate valves. 4. Iron globe valves. B.
More informationNUCLEAR VALVES. Design, Manufacturing, Assembly and Testing
NUCLEAR S Design, Manufacturing, Assembly and Testing DAHER S NUCLEAR MARKET Daher has been innovating in the nuclear valve sector for nearly 40 years. Its valves are present across the market: > Nuclear
More informationMichigan State University Construction Standards. GENERAL-DUTY VALVES FOR PLUMBING PIPING Page
Page 220523-1 SECTION 220523 - PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections,
More informationSECTION VALVES
PART 1 GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions Specification Sections, apply to this Section. B. Related Sections:
More informationCAST STEEL GATE VALVE
CAST STEEL GATE VALVE DESIGN CHARACTERISTICS OF API00 CAST STEEL GATE VALVE The design of thrust bearing makes valve opened easily and flexibly. Handwheel Nut Handwheel Stem Nut Retainer Stem Nut Lubricating
More informationCast-Iron Valves G101 DI BUTTERFLY VALVE LEVER... 2 G401 CI GLOBE VALVE CL G403 CI GLOBE VALVE PN G103 DI BUTTERFLY VALVE GEAR...
Cast-Iron Valves PAGE G101 DI BUTTERFLY VALVE LEVER.... 2 PAGE G401 CI GLOBE VALVE CL125.... 9 G103 DI BUTTERFLY VALVE GEAR.... 3 G403 CI GLOBE VALVE PN16.... 10 G201 CI Y STRAINER CL125.... 4 G501 CI
More informationECOLINE GTF 800 Type Series Booklet
Gate Valve Class 800 NPS ½''-2'' Type Series Booklet Legal information/copyright Type Series Booklet All rights reserved. The contents provided herein must neither be distributed, copied, reproduced, edited
More informationGWC Italia. Proven technology for individual valve solutions worldwide HIGH PERFORMANCE BUTTERFLY VALVE HPB-1003
w w w. g w c i t a l i a. c o m GWC Italia Proven technology for individual valve solutions worldwide HIGH PERFORMANCE BUTTERFLY VALVE HPB-1003 1 1 GWC ITALIA Proven technology for individual valve solutions
More informationCLASS 400 FORGED BRASS BALL VALVE
CLASS 400 FORGED BRASS BALL VALVE FIG. 214 Screwed body cap, PTFE seats, Blowout-proof stem. Screwed ends to BS 21. Nickel plated body. Chrome plated ball. UNI-FLO NYLON BALL VALVES FIG. 214NS/NB Features:
More informationUNIVERSITY SERVICES ANNEX James Madison University Harrisonburg, Virginia State Project Code: Architect s Project Number:
SECTION 230523 GENERAL DUTY VALVES FOR HVAC PIPING PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Provisions of the Contract and of the Contract Documents apply to this Section. 1.2 DEFINITIONS A. The following
More informationTrunnion Ball Valves
Trunnion Ball Valves Trunnion Classification and Operating range TRUNNION type ball valves are cut off devices suitables for use both on natural gas distribution network and for liquid service when high
More informationTrunnion Ball Valves
Ball Valves Ball Valves TRUNNION type ball valves are cut off devices suitables for use both on natural gas distribution network and for liquid service when high performance on thightness and low pressure
More information516509_tabs 11/16/10 4:55 AM Page 1 FIRE HYDRANTS
Date Printed: November 2010 FIRE HYDRANTS or Tyton (6"),6, or 8" A EDDY FIRE HYDRANTS PARTS LIST WORKING PRESSURE: 150 PSI Note: Discontinued For Reference Only 350 PSI Working Pressure
More informationGWC Italia. Proven technology for individual valve solutions worldwide API 6D SWING CHECK VALVES SC-1002
GWC Italia Proven technology for individual valve solutions worldwide API 6D SWING CHECK VALVES SC-1002 GWC ITALIA Proven technology for individual valve solutions worldwide GWC Italia Worldwide Network
More informationSECTION (15110) - GENERAL DUTY VALVES FOR PLUMBING PIPING
SECTION 22 05 23 (15110) - GENERAL DUTY VALVES FOR PLUMBING PIPING PART 1 GENERAL 1.01 SUMMARY A. Section Includes: 1. Valves. B. Related Sections: 1.02 REFERENCES 1. Section 22 05 53 (15075) Identification
More informationLOWER MACUNGIE TOWNSHIP COMMUNITY CENTER ADDITIONS AND RENOVATIONS
LOWER MACUNGIE TOWNSHIP COMMUNITY CENTER. SECTION.0 - GENERAL-DUTY VALVES FOR PLUMBING PIPING PART - GENERAL. RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and
More informationCHAMPION WAFER CHECK VALVES SIZE RANGE 2" 72" ASME CLASS MATERIALS: IRON CARBON STEEL STAINLESS STEEL ALUMINUM BRONZE ALLOY 20 MONEL NICKEL
CHAMPION WAFER CHECK VALVES SIZE RANGE 2" 72" ASME CLASS 125 2500 MATERIALS: IRON CARBON STEEL STAINLESS STEEL ALUMINUM BRONZE ALLOY 20 MONEL NICKEL CHAMPION VALVES, INC. DUAL DISC SPRING LOADED WAFER
More informationDIVISION 23 HEATING, VENTILATING, AND AIR CONDITIONING (HVAC) SECTION HVAC VALVES
DIVISION 23 HEATING, VENTILATING, AND AIR CONDITIONING (HVAC) SECTION 23 05 23 PART 1 GENERAL 1.01 DESCRIPTION A. Provide valves for the following systems: 1. Heating Hot Water 2. Chilled Water 3. Condenser
More informationOPTIMAL VALVE SOLUTIONS FOR OIL AND GAS PLANTS
AVK FLOW CONTROL OPTIMAL VALVE SOLUTIONS FOR OIL AND GAS PLANTS InterApp World Valve Wouter Witzel TEC artec AVK 1 2 AVK FLOW CONTROL l OIL & GAS PLANTS CONTENT: AVK FLOW CONTROL 4-5 OFFSHORE PRODUCTION
More informationH i g h P r e s s u r e V a l v e
High Pressure Valve HIGH PRESSURE VALVES Applications & Specifications Range Gate Valve Advantages STRACK has designed and manufactured high pressure valves for over 35 years. Currently more than 3000
More informationForged 3 Piece Trunnion Mounted Ball Valves Series PL
Forged 3 Piece Trunnion Mounted Ball Valves Series PL Construction: 3 piece bolted side entry Trunnion housings 4 Trunnion retainer plates 6 Standard single piece seating SPE & DPE Special scraping 3 piece
More informationGUJARAT NARMADA VALLEY FERTILIZERS & CHEMICALS LIMITED 50,000 MTPA PAC PROJECT ANNEXURE 6.4 SECTION 4-07 PROCUREMENT SPECS FOR FORGED VALVES
GUJARAT NARMADA VALLEY FERTILIZERS & HEMIALS LIMITED 50,000 MTPA PA PROJET ANNEXURE 6.4 SETION 4-07 PROUREMENT SPES FOR FORGED VALVES ONTENT 1.0 GENERAL 2.0 DESIGN 3.0 TESTS 4.0 INSPETION 5.0 SHIPMENT
More information1.1 PURPOSE A. This section is intended to define the general installation and minimum product requirements for hydronic and steam valves.
Date Description of Change Pages / Sections Modified ID 6/15/16 Entire document - mgl44 PART 1 - INTRODUCTION 1.1 PURPOSE A. This section is intended to define the general installation and minimum product
More informationCITY OF TAMPA ADDENDUM 2. July 13, Contract 17-C-00030; David L. Tippin Water Treatment Facility Lime Slaker Replacement
CITY OF TAMPA Bob Buckhorn, Mayor CONTRACT ADMINISTRATION DEPARTMENT Michael W. Chucran, Director ADDENDUM 2 July 13, 2017 Contract 17-C-00030; David L. Tippin Water Treatment Facility Lime Slaker Replacement
More informationLATEST ARRIVALS CATALOGUE STOCK
LATEST ARRIVALS CATALOGUE STOCK PIPES VALVES FLANGES & FITTINGS IN CARBON STEEL STAINLESS STEEL LATEST ARRIVALS!!!!!! VALVE PRODUCTS CAST IRON WAFER TYPE BUTTERFLY VALVE, PINLESS SHAFT, DUCTILE NICKEL
More informationHenderson Engineers, Inc. SECTION GENERAL DUTY VALVES FOR PLUMBING PIPING PART 1 - GENERAL REQUIREMENTS
SECTION 220523 - GENERAL DUTY VALVES FOR PLUMBING PIPING PART 1 - GENERAL REQUIREMENTS 1.1 SUMMARY A. This Section includes general duty valves common to most plumbing piping systems. 1. Special purpose
More informationPROJECT TITLE PROJECT NO: CONTRACT TITLE GRANT NO: UNIVERSITY OF CALIFORNIA, DAVIS CITY, CALIFORNIA
The following standard specification is intended to be edited according to the specifics of the project. Brackets [ ] and areas shaded in gray [e.g. format] indicate requirements that are optional depending
More informationSeries 800 AWWA Butterfly Valves
Series 800 AWWA Butterfly Valves Valve and Gate Group A Century of Experience GA valves are known for long term reliability in the most demanding water and wastewater applications. Whether a simple check
More informationInstallation, Operation and Maintenance Manual for the HE Series
Installation, Operation and Maintenance Manual for the HE Series High Performance Butterfly Valve "Double Offset" CONTENT IOM-HP-100614-1 1. INTRODUCTION 1.1 GENERAL NOTE 1.2 STRUCTURE & TYPE 1.3 OPERATION
More informationForged 3 Piece Trunnion Mounted Ball Valves Series MS
Forged 3 Piece Trunnion Mounted Ball Valves Series MS Construction: 3 piece bolted side entry Trunnion housings 4 Trunnion retainer plates 6 Metal Seated Chrome carbide and tungsten carbide trims Uni-directional
More informationSWING CHECK VALVES SERIES 52-SC SERIES 600
SWING CHECK VALVES SERIES 52-SC SERIES 600 FEATURES/BENEFITS/SPECIFICATIONS AMERICAN Flow Control Series 52-SC Swing Check Valves incorporate design features to help increase service life for water and
More informationAMERICAN FLOW CONTROL 3-16 SERIES 2100 RESILIENT SEATED CHECK VALVE
AMERICAN FLOW CONTROL 3-16 SERIES 2100 RESILIENT SEATED CHECK VALVE CONSTRUCTION STAINLESS STEEL PIPE PLUG Allows installation of pressure gauge. STAINLESS STEEL FASTENERS Helps provide corrosion resistance.
More informationVB VALVES & AUTOMATION
Introduction to Valve What are Valves? Valves are mechanical device that controls the flow and pressure within a system or process. They are essential components of a piping system that conveys liquids,
More informationThe bolted bonnet configuration achieves simultaneously the best performance and the highest safety.
The achieves simultaneously the best performance and the highest safety. Features A rugged body and bonnet design in accordance with API 600, ASME B16.34 and BS 1414. Tight shutoff performance is always
More informationChampion Valves, Inc. DUAL DISC SPRING LOADED WAFER CHECK VALVES
Champion Valves, Inc. DUAL DISC SPRING LOADED WAFER CHECK VALVES FEATURES Light weight, versatile design 80% to 90% less than conventional full-body swing check valves Dual Disc open to 80 degrees Spring-loaded
More informationSize: 1/4 to 3. Material: 316 Stainless Steel, Carbon Steel,
Size: 1/4 to 4 Material: 316 Stainless Steel, Carbon Steel, Alloy 20, Hastelloy C, Monel, Brass, SW, BW, BSPT, 150#, 300#, 600#, Flanged Pressure: Vacuum to 3000 PSI* -50 to 600 F* ASME B16.34 Design Bottom
More informationStandard-Low Emission Valves to 100 PPM. A-Series Brass Appliance Valves CSA Approved; 1 & 2 piece Body Designs; Threaded & Flare End connections
Standard-Low Emission Valves to 100 PPM Cast Steel Valves 150 2500 ASME; Gate, Globe & Check Valves; WCB & High Temperature Chrome Valves; Low Temperature Valves; Flanged, Butt-weld, RTG, End Connections;
More informationStandards are finally approved by the Standards High Council of Iranian Ministry of Petroleum.
FOREWORD This Standard is intended to be used within and for Iranian Ministry of Petroleum (N.I.O.C, N.I.G.C, N.P.C., N.I.O.R.D.C. and other affiliate organizations and companies) and has been prepared
More informationGWC Italia. Proven technology for individual valve solutions worldwide NGV-1002
GWC Italia Proven technology for individual valve solutions worldwide needle valves gauge valves NGV-1002 GWC ITALIA Proven technology for individual valve solutions worldwide GWC Italia Worldwide Network
More informationSolutions For The Oil & Gas
Bolted Bonnet Gate & Globe Crane Globe & Gate Valves are used on almost all refinery units and are available in different material options of cast steel. Gate, globe, check, globe stop-check valves are
More informationCast Steel Valves. General Index. Figure Number Index JENKINS -1-
Cast Valves Cast Valves SINCE 1864 General Index General Data... 2 Materials... 2 Identification... 3 Gate Valve Features... 4, 5 Globe Valve Features... 9, 10 Swing Check Valve Features... 14, 15 Pressure/Temperature
More informationL&T VALVES BUSINESS GROUP A
Larsen & Toubro Limited (L&T) is a US $ 5 billion engineering and construction company, with a strong presence in manufacturing, services and Information Technology. L&T was founded in 1938 by two Danish
More informationAWWA C517 ECCENTRIC PLUG VALVES
COMPANY CERTIFICATE AWWA C517 ECCENTRIC PLUG VALVES TIANJIN FSK FLOW CONTROL EQUIPMENT CO., LTD VERSION: 2013-05-EPV CONTENTS ABOUT FSK 1 Our Certifications.....2 Rectangular Port Eccentric Plug Valves.3
More informationSlab & Double Expanding Gate Valves
Slab & Double Expanding Gate Valves Double Expanding Characteristics The main feature of a double expanding gate valve is the 2 pieces obturator that guarantees a simultaneous mechanical seal both in the
More information88A-100 Series. Carbon Steel ANSI Class 150 Flanged Std. Port Ball Valve - 1-1/2 through 2 STANDARDS COMPLIANCE STANDARD FEATURES
Carbon Steel ANSI Class 150 Flanged Std. Port Ball Valve - 1-1/2 through 2 2. Retainer ASTM A108 Type 1215 3. Ball ASTM A108 Type 1215 Chrome Plated 9. Gland Plate 302 or 304 SS 10. Stem Nut 316 SS 11.
More informationCast Iron Valves. Product Information. It s all at Albion
Cast Iron Valves Product Information It s all at Albion ART 77-78 Cast Iron Ball Valve Flanged Ends Flange Mounting PN16 Only ISO 5211 Direct Mount (Not 200mm) Art 77/78 Plated Brass/Stainless Ball BS
More informationCAST IRON VALVES CATALOG
CAST IRON VALVES CATALOG www.walworthvalves.com INDEX INTRODUCTION WALWORTH ENGINEERING CONTROL... 5 WALWORTH QUALITY SYSTEM... 5 QUALITY CONTROL EQUIPMENT... 9 CAST IRON GATE, GLOBE & SWING CHECK VALVES
More informationFittings. Valves. Actuators
Fittings Valves Actuators Low Emission Valves to 50 PPM Cast Steel Valves 150 2500 ASME; Globe & Check Valves; WCB & High Temperature Chrome Valves; Low Temperature Valves; Flanged, Butt-weld, RTG, End
More informationSECTION GENERAL-DUTY VALVES FOR PLUMBING PIPING
SECTION 22 05 23 PART 1 - GENERAL 1.1 SUMMARY A. Work Included: 1. Valves, General 2. Gate Valves 3. Balancing Valves 4. Ball Valves 5. Swing Check Valves 6. Backflow Prevention Assemblies 7. Pressure
More informationBolted Bonnet Valves. (BL Series) Cast Steel. Cast Steel Bolted Bonnet Valves - BL Series
Cast Steel Bolted Bonnet Valves (BL Series) Gate Valve - BL5 Series Gate Valve Features Globe Valve - BL6 Series Globe Valve Features Swing Check Valve - BL7 Series Optional Features Model Numbers GATE
More informationButterfly Valve. Resilient or Sleeved (Model 9400) Damper or Clearance (Model9300)
Butterfly Valve Resilient or Sleeved (Model 9400) Damper or Clearance (Model9300) Sizes: - 2 to 120 (50mm to 3000mm) Rating: - Class 150 & PN16 Wafer Type Lug Type Flanged End Information:- www.invacovalves.com
More informationFASANI PRESSURE SEAL CAST GLOBE VALVES - STYLE B Y AND T PATTERN
A wide range of globe valves specifically designed for high pressure and high temperature applications, where low pressure loss is required. FEATURES GENERAL APPLICATION Our pressure seal globe valves
More informationAsk us about our 3 Year MAS Valve Limited Warranty
Fittings Actuators A-Series Brass Appliance Valves CSA Approved; 1 & 2 piece Body Designs; Threaded & Flare End connections B-Series Brass Ball Valves Full and Reduced Port Designs; ASTM 37700, Qualified
More informationHattersley Newman Hender Ltd
Product Guide Quality Valves from Hattersley WHEN IT REALLY COUNTS, YOU CAN DEPEND ON HATTERSLEY Hattersley Newman Hender is one of the world s premier manufacturers of cast iron, ductile iron and copper
More information