SITRANS F flowmeters SITRANS F C MASSFLO MASS MC2 4/153. Overview

Transcription

1 Overview MASS 2100 MC2 DN 50 to DN 150 (2 to 6 ) and MC2 Hygienic (EHEDG certified) from DN 20 to DN 80 (¾ to 3 ) is suitable for accurate mass flow measurement of a variety of liquids and gases. The sensor offers superior performance in terms of flow accuracy, turn-down range and density accuracy. The very compact sensor construction makes installation and commissioning of even the largest sizes very straight forward and easy. The sensor delivers true multi parameter measurements i.e.: Mass flow, volume flow, density, temperature and fraction flow. Benefits High accuracy better than 0.15% of mass flow rate Large dynamic turn down range Densitometer performance available through a density accuracy better than g/cm 3 Space saving split-flow sensor design facilitating low pressure loss Parallel S-tube design and optimal oriented inductive sensors enhances accuracy and turn-down range Self draining in both horizontal and vertical position Rigid enclosure design reduces the influence from pipeline vibration and thermal stress -wire Pt100 temperature measurement ensures optimum accuracy on mass flow, density and fraction flow SENSORPROM enables true "plug & play". Installation and commissioning in less than 10 min. Safe Ex-design EEx em [ib] IIC Sensor pipe available in high quality AISI 316L stainless steel or Hastelloy C offering optimum corrosion resistance The sensor calibration factor is also valid for gas measurement Application Coriolis mass flowmeters are suitable for measuring all liquids and gases. The measurement is independent of changes in process conditions/parameters such as temperature, density, pressure, viscosity, conductivity and flow profile. Due to this versatility the meter is easy to install and the coriolis flowmeter is recognized for its high accuracy in a wide turndown range which is a paramount in many applications. The main applications of the coriolis flowmeter can be found in all industries, such as: Chemical & pharma Detergents, bulk chemicals, pharmaceuticals, acids, alkalis Food & beverage EDEHG certified Oil & gas Water & waste water The wide varity of combinations and versions from the modular system means that ideal adaptation is possible to each measuring task. Design Dairy products, beer, wine, softdrinks, plato/brix, fruit juices and pulps, bottling, CO 2 dosing, CIPliquids Gas measurement, furnace control, test separators, LPG, oil bunkering Dosing of chemicals for water treatment The MC2 sensor consists of 2 parallel measuring pipes, welded directly onto a flow-splitter at each end to eliminate a direct coupling to the process connectors and significantly reduce effects from external vibrations. The flow-splitters are welded onto a rigid sensor housing which acts as a mechanical low pass filter. The sensor is available in 2 material configurations, AISI 316L or Hastelloy C with a wide variety of process connections. The enclosure is made of stainless steel AISI with a grade of encapsulation of IP67/NEMA. The sensor is Ex-approved EEx em [ib] IIC The sensor can be installed in horizontal or vertical position, and is self draining in both positions. Due to the increased safety concept used on the bigger sized sensors, the MASS " or MASS 6000 IP67 standard versions can be connected but has to be remote mounted in the safe area. For all non hazardous applications the complete MASS 6000 transmitter program can be used. Hazardous area Zone Safe area Siemens FI /153

2 Function The measuring principle is based on coriolis law of movement, see System information MASSFLO coriolis mass flowmeters. Integration Installation guidelines MC2 DN DN 150 Installation of sensor The optimal installation orientation is a vertical installation with an upward flow as shown in the following figure. This has the advantage that any solids contained in the fluid will settle downward and gas bubbles will move upward out of the meter tube when the flow rate is zero. Additionally, it is easy to drain the meter tube. Deposits can thereby be avoided. Vertical orientation: Installation in a drop line The installation recommendation shown in the following figure is only possible if a pipeline reduction or orifice with a smaller cross section can be installed to prevent the sensor from being partially drained during the measurements. Supply Reservoir Flowmeter Primary Orifice Pipe Constriction Valve Product Reservoir Vertical installation self-draining (upward flow) Horizontal orientation Installation in a drop line Difficult installation locations The accumulation of air or gas bubbles in the meter tube can lead to increased inaccuracies. Some difficult installations are shown in the following figure. Installations at the highest point in the system (figure A) can result in the formation of air pockets which can lead to appreciable inaccuracies. Another difficult installation condition is immediately upstream of a free discharge (figure B) in a drop line. Horizontal installation Horizontal orientation, self-draining Horizontal orientation, self-draining, α 2... Difficult installation locations /15 Siemens FI

3 Technical specifications Versions mm (inch) 50 (2) 65 (2½) 80 (3) 100 () 150 (6) Inside pipe diameter 2 x mm (inch) 25.0 (0.98) 33.7 (1.33) 38.0 (1.9) 8.3 (1.90) 76.1 (2.99) Pipe wall thickness mm (inch) 1.5 (0.06) 1.5 (0.06) 2.0 (0.08) 2.6 (0.10) 3.2 (0.13) Mass flow measuring range at pressure drop of 2 bar (29 psi) at 1 g/cm 3 (0.036 lb/inch 3 ) kg/h (lb/h) 2,600 (93,900) For accuracy specifications see System information MASSFLO. Pressure drop 87,000 (192,000) 113,00 (250,000) 192,000 (23,300) 510,000 (1,12,300) Density g/cm 3 (lb/inch 3 ) ( ) Fraction e.g. Brix Brix Not possible Temperature Standard-version C ( F) C ( F) Ex-version C ( F) C ( F) Liquid pressure measuring pipe Stainless steel (DIN 213, 20 C (68 F)) bar (psi) 100 (150) 100 (150) 100 (150) 0 (580) 0 (580) Materials Measuring pipe SS or Hastelloy C Flange SS or Hastelloy C Enclosure IP67 Enclosure material/connection box / aluminium Process connections See dimensional drawings Electrical connections Screw terminals, M 20 Cable length 5 x 2 x 0.35 mm 2 twisted and screened in pairs, ext. Ø 12 mm Ex-version ATEX 1388X II 1/2 EEx em [ib] IIC T2-T6 Weight approx. kg (lb) 35 (77) 9 (108) 59 (130) 92 (202) 260 (572) Siemens FI /155

4 Selection and Ordering data Order-No. Order code flow sensors MASSFLO MC2 F) 7ME Nominal diameter W 1.571/316Ti DN 50 1 A DN 65 1 B DN 80 1 C DN D DN E Hastelloy C DN 50 2 A DN 65 2 B DN 80 2 C DN D DN E Nominal pressure PN 0 A PN 100 B Class 150 C Class 300 D Class 600 E Clamps/screwed-connections F Process connections Flange EN DN 50 (PN 0/PN 100) 2 0 DN 65 (PN 0/PN 100) 2 1 DN 80 (PN 0/PN 100) 2 2 DN 100 (PN 0) 2 3 DN 150 (PN 0) 2 Flange ASME/ANSI 2 (class 150/300/600) ½ (class 150/300/600) (class 150/300/600) 3 2 (class 150/300) (class 150/300) 3 Dairy screwed connection to DIN DN 50 (PN 25) 0 DN 65 (PN 25) 1 DN 80 (PN 25) 2 DN 100 (PN 25) 3 Dairy clamp connection DIN Tri-clamp 50 mm clamp (PN 16) mm clamp (PN 10) mm clamp (PN 10) mm clamp (PN 10) 5 3 Aseptic nut flange DIN form A for pipes dimensioned by DIN DN 0 (1½ ) 6 0 DN 50 (2 ) 6 1 DN 65 (2½ ) 6 2 DN 80 (3 ) 6 3 DN 100 ( ) 6 Configuration Flow and density (5 kg/m 3 ) 1 Flow, Brix/Plato and density (1 kg/m 3 ) 1) 2 Flow and density (1 kg/m 3 ) 1) 5 Flow, fraction (specified by customer) and 9 N 0 Y density (1 kg/m 3 ) 1) Ex-approval Without explosion protection A With explosion protection B Selection and Ordering data flow sensors MASSFLO MC2 Cable No cable (see accessories) A Calibration Standard 1 Matched pair 2 1) Extended density and fraction not possible with DN 150 Please also see for practical examples of ordering Dairy MLFB example MASS MC2 sensor 7 M E A A B 1 Stainless steel, DN 80 1 C Dairy screwed 2 connection DIN 11851, DN 80 MASS 6000 IP67 remote mounted Selection and Ordering data Additional information Please add -Z to Order No. and specify Order code(s) and plain text. Pressure testing certificate PED: 97/23/EC Material certificate EN B Welding certificate NDT X-ray: EN 25817/B Factory certificate according to EN Factory certificate according to EN Tag name plate, stainless steel Tag name plate, plastic Customer specific transmitter setup Customer specified, matched pair (5x2) Customer specified calibration (5x2) Customer specified, matched pair (10x1) Customer specified calibration (10x1) Special version Order-No. Order code F) 7ME Order code C11 C12 C13 C1 C15 Y17 Y18 Y20 Y60 Y61 Y62 Y63 Y99 Accessories Description Order No. F) Cables from MC2 sensor to MASS 6000 transmitter 10 m (32 ft) FDK-083H m (80 ft) FDK-083H m (20 ft) FDK-083H m (80 ft) FDK-083H300 Spare parts Description Order No. F) 2 kb SENSORPROM unit FDK-083H10 (Sensor Serial No. and Order No. must be specified by ordering) /156 Siemens FI F) All products on this page subject to export regulations AL: 9I999, ECCN: N.

5 Selection and Ordering data Order-No. Order code flow sensors MASSFLO MC2 for Hygienic applications only F) 7ME Nominal diameter W 1.35/316L DN 20 1 A DN 25 1 B DN 0 1 C DN 50 1 D DN 65 1 E DN 80 1 F Nominal pressure 0 bar, PN 25 Clamps/screwed-connections F Pressure and Process connections (Dairy screwed connection to DIN only) DN 20 (¾ ), PN 25 0 DN 25 (1 ), PN 25 1 DN 0 (1½ ), PN 25 2 DN 50 (2 ), PN 25 3 DN 65 (2½ ), PN 25 DN 80 (3 ), PN 25 5 Configuration Flow and density (5 kg/m 3 ) 1 Flow, Brix/Plato and density (5 kg/m 3 ) 2 Flow and density (1 kg/m 3 ) 1) 5 Flow, fraction (customer specified application 9 N 0 Y form the net) Ex-approval Standard A Ex, ATEX, FM Class I, Div 1 B Cable No cable (see accessories) A Calibration Standard 1 Matched pair 2 Please also see for practical examples of ordering Selection and Ordering data Additional information Please add -Z to Order No. and specify Order code(s) and plain text. Pressure testing certificate PED: 97/23/EC Material certificate EN B Welding certificate NDT X-ray: EN 25817/B Factory certificate according to EN Factory certificate according to EN Tag name plate, stainless steel Tag name plate, plastic Customer specific transmitter setup Customer specified, matched pair (5x2) Customer specified calibration (5x2) Customer specified, matched pair (10x1) Customer specified calibration (10x1) Special version Order code C11 C12 C13 C1 C15 Y17 Y18 Y20 Y60 Y61 Y62 Y63 Y99 Accessories Description Order No. F) Cables from MC2 sensor to MASS 6000 transmitter 10 m (32 ft) FDK-083H m (80 ft) FDK-083H m (20 ft) FDK-083H m (80 ft) FDK-083H300 Spare parts Description Order No. F) 2 kb SENSORPROM unit FDK-083H10 (Sensor Serial No. and Order No. must be specified by ordering) Dairy MLFB example MASS MC2 sensor 7 M E A A A 1 Stainless steel, W 1.35/316L 1 C Dairy screwed connection 2 DIN 11851, DN 0, PN25 Siemens FI /157

6 Dimensional drawings Remote design, flanged construction, DIN/ANSI Meter size Process connection size L [mm Inch DN Inch DN DIN form A DIN 2635 PN 0 DIN 2637 PN 100 ANSI CL 150 ANSI CL 300 ANSI CL 600 G 1) [mm F [mm B A Weight [mm [mm kg (36.1) 90 (37.01) 979 (38.5) 970 (38.19) 980 (38.58) 1001 (39.1) ½ (2.56) 1100 (3.31) 118 (5.20) 1218 (7.95) 1228 (8.35) 128 (9.13) (15.87) (5.83) (3.15) (.33) 38 2½ (7.13) 1220 (8.03) 1259 (9.57) 1250 (9.21) 1260 (9.61) 1281 (50.3) ½ (2.56) 1100 (3.31) 118 (5.20) 1218 (7.95) 1228 (8.35) 129 (9.17) 7 (16.89) (6.6) (3.82) (5.12) (7.2) 1220 (8.03) 1260 (9.61) 120 (8.82) 1260 (9.61) 1282 (50.7) ½ (51.57) 1330 (52.36) 1378 (5.25) 1365 (53.7) 1375 (5.13) 1396 (5.96) (7.2) 1220 (8.03) 1260 (9.61) 120 (8.82) 1260 (9.61) 1282 (50.7) 58 (17.95) (7.32) (.25) (5.51) (57.60) 180 (58.27) 1530 (60.2) 1500 (59.06) 1520 (59.8) 1568 (61.73) (63.70) 160 (6.57) 1680 (66.1) 1660 (65.35) 1680 (66.1) 1702 (67.01) (57.60) 180 (58.27) 1530 (60.2) 1500 (59.06) 1520 (59.8) 1568 (61.73) 91 (19.69) (8.6) (5.16) (6.69) N/A 1778 (69.92) N/A 1806 (71.10) 1826 (71.89) N/A N/A 200 (80.31) N/A 2070 (81.50) 2090 (82.28) N/A (2.13) (11.22) (7.8) (9.8) 1) For EEx add 5 mm Remote design, food industry fittings, DIN Meter size Process connection size L [mm g [mm G 1) [mm F [mm B [mm A [mm R [mm Inch DN Inch DN Rd 78 x 1/6 918 (36.1) 7 (0.28) 177 (6.97) (15.87) 18 (5.83) 80 (3.15) 110 (.33) 2½ 65 Rd 95 x 1/ (2.56) 8 (0.31) 25 (10.00) 3 2½ Rd 78 x 1/ (7.13) 7 (0.28) 291 (11.6) 0 2½ 65 Rd 95 x 1/ (2.56) 8 (0.31) 29 (16.89) 16 (6.6) 97 (3.82) 130 (5.12) 227 (10.91) 3 80 Rd 110 x 1/ (7.2) 8 (0.31) 281 (11.06) ½ 65 Rd 95 x 1/ (51.57) 8 (0.31) 319 (12.56) Rd 110 x 1/ (7.2) 8 (0.31) 56 (17.95) 186 (7.32) 108 (.25) 10 (5.51) 258 (10.16) Rd 110 x 1/6 163 (57.60) 10 (0.39) 381 (15.00) Rd 110 x 1/ (63.70) 8 (0.31) 01 (15.79) (19.69) 215 (8.6) 131 (5.16) 170 (6.69) 100 Rd 130 x ¼ 163 (57.60) 10 (0.39) 31 (12.36) 86 1) For EEx add 5 mm Weight kg /158 Siemens FI

7 Remote design, Tri-clamp DIN (ISO 2852) Dimensions in mm (inch) Meter size Process connection size Inch DN Inch DN 1) For EEx add 5 mm L [mm ± 3 G 1) [mm F [mm B [mm A [mm R [mm (35.9) 225 (8.86) (15.87) 18 (5.83) 80 (3.15) 110 (.33) 2½ (2.2) 305 (12.01) 27 2½ (6.93) 335 (13.19) 36 2½ (2.2) 29 (16.89) 16 (6.6) 97 (3.82) 130 (5.12) 275 (10.83) (6.6) 328 (12.91) ½ (51.26) 378 (1.88) (6.6) 56 (17.95) 186 (7.32) 108 (.25) 10 (5.51) 296 (11.65) (57.01) 30 (16.93) (62.91) 0 (17.32) (19.69) 215 (8.6) 131 (5.16) 170 (6.69) (57.01) 365 (1.37) 69 Weight [kg] Siemens FI /159

8 Process Connections Flanges DIN/ASME Tri-Clamp DIN DN 15 to DN 50: Series 3 - DN 65 to DN 100: Series 1 Food Industry fittings DIN The max. allowable operating pressure is a function of the process connection type, the fluid temperature, the bolts and the gaskets. Pressure Rating PN 16, PN 0, PN 100 (to DN 80 (3 )) Class 150, Class 300, Class 600 (to DN 80 (3 )) Housing as secondary containment max. 0 bar Pressure Equipment Directive 97/23/EG Conformity evaluation category III, fluid group 1, gas, diagramme 6 Corrosion resistance of measuring pipe material to measuring medium has to be considered. Material strength for process connections Process connection Thread acc. DIN Tri-Clamp acc. DIN Size PS max. TS max. TS min. DN Inch bar (psi g) C ( F) C ( F) ½... 1½ 0 (580) 10 (28) -0 (-0) (363) 10 (28) -0 (-0) ½ (232) 120 (28) -0 (-0) ½ (15) 120 (28) -0 (-0) Material Loads Curves for Flanged Flowmeters DIN-Flanges SS 1.571/316Ti to DN 100 ( ) ASME-Flanges SS 1.571/316Ti to DN 100 ( ) /160 Siemens FI

9 Dimensional drawings Remote Design, Food Industry Fitting, DIN Food industry fitting DIN Threaded stubs R G Threaded stubs A F B L -5 Flow direction g Dimensions in mm (inch) DN (Size) Process connections L -5 g G F B A R Weight DN inch DN inch mm (inch) mm (inch) mm (inch) mm (inch) mm (inch) mm (inch) mm (inch) kg 15 ½ Rd3 x 1/8 672 (26.6) (0.16) 152 (5.98) 20 ¾ 20 ¾ Rd x 1/6 583 (22.95) 6 (0.2) 358 (1.9) 127 (5.00) 66 (2.60) 89 (3.50) 102 (.02) Rd52 x 1/6 683 (26.89) 7 (0.28) 152 (5.98) 20 ¾ Rd x 1/6 73 (29.25) 6 (0.2) 162 (6.38) Rd52 x 1/6 63 (25.31) 7 (0.28) 358 (1.9) 127 (5.00) 66 (2.60) 89 (3.50) 112 (.11) 1 0 1½ Rd65 x 1/6 786 (30.9) 7 (0.28) 185 (7.28) If this connection is supplied with an EHEDG-certified device, the device nominal sizes must correspond with the connection nominal sizes! Siemens FI /161

10 Remote Design, Food Industry Fitting, DIN Dimensions in mm (inch) DN (Size) Process connections L -5 g G F B A R Weight DN inch DN inch mm (inch) mm (inch) mm (inch) mm (inch) mm (inch) mm (inch) mm (inch) kg 0 1½ ½ Rd52 x 1/6 86 (3.02) 7 (0.28) 218 (8.58) ½ Rd65 x 1/6 761 (29.96) 7 (0.28) 37 (1.72) 129 (5.08) 6 (2.52) 90 (3.5) 16 (6.6) Rd78 x 1/6 918 (36.1) 7 (0.28) 21 (9.9) ½ Rd65 x 1/ (0.35) 7 (0.28) 233 (9.17) Rd78 x 1/6 918 (36.1) 7 (0.28) 03 (15.87) 18 (5.83) 80 (3.15) 110 (.33) 177 (6.97) ½ Rd95 x 1/ (2.56) 8 (0.31) 25 (10.00) Rd78 x 1/ (7.13) 7 (0.28) 291 (11.6) ½ Rd95 x 1/ (2.56) 8 (0.31) 29 (16.89) 16 (6.6) 97 (3.82) 130 (5.12) 227 (8.9) 80 3 Rd110 x 1/ 1200 (7.2) 8 (0.31) 281 (11.06) ½ Rd95 x 1/ (51.57) 8 (0.31) 319 (12.56) Rd110 x 1/ 1200 (7.2) 8 (0.31) 56 (17.95) 186 (7.32) 108 (.25) 10 (5.51) 258 (10.16) Rd130 x 1/ 163 (57.60) 10 (0.39) 381 (15.00) Rd110 x 1/ 1618 (63.70) 8 (0.31) 01 (15.79) (19.68) 215 (8.6) 131 (5.16) 170 (6.69) 100 Rd130 x 1/ 163 (57.60) 10 (0.39) 31 (12.36) 86 If this connection is supplied with an EHEDG-certified device, the device nominal sizes must correspond with the connection nominal sizes! /162 Siemens FI

11 Remote Design, Tri-Clamp DIN Dimensions in mm (inch) DN (Size) Process connections L -5 G F B A R Weight DN inch DN mm (inch) mm (inch) mm (inch) mm (inch) mm (inch) mm (inch) kg 20 ¾ (½ ) 656 (25.83) 10 (5.51) 20 (¾ ) DIN (22.09) 358 (1.09) 127 (5.00) 66 (2.60) 89 (3.50) 92 (3.62) 25 (1 ) 661 (26.02) 12 (5.59) 20 (¾ ) 721 (28.39) 152 (5.98) 25 (1 ) DIN (2.5) 358 (1.09) 127 (5.00) 66 (2.60) 89 (3.50) 102 (.02) 0 (1½ ) 773 (30.3) 180 (7.09) If this connection is supplied with an EHEDG-certified device, the device nominal sizes must correspond with the connection nominal sizes! Siemens FI /163

12 Remote Design, Tri-Clamp DIN Dimensions in mm (inch) DN (Size) Process connections L -5 G F B A R Weight DN inch DN inch mm (inch) mm (inch) mm (inch) mm (inch) mm (inch) mm (inch) kg 0 1½ ½ (33.15) 22 (9.53) ½ 78 (29.5) 37 (1.72) 129 (5.08) 6 (2.52) 90 (3.5) 195 (7.68) (35.9) 278 (10.9) ½ 1012 (39.8) 275 (10.83) (35.9) 03 (15.87) 18 (5.83) 80 (3.15) 110 (.33) 225 (8.86) ½ 1073 (2.2) 305 (12.01) (6.93) 335 (13.19) ½ 1073 (2.2) 29 (16.89) 16 (6.6) 97 (3.82) 130 (5.12) 275 (10.83) (6.6) 328 (12.91) ½ 1302 (51.26) 378 (1.88) (6.6) 56 (17.95) 186 (7.32) 108 (.25) 10 (5.51) 296 (11.65) (57.01) 30 (16.93) (62.91) 0 (17.32) (19.68) 215 (8.6) 131 (5.16) 170 (6.69) (57.01) 365 (1.37) 69 If this connection is supplied with an EHEDG-certified device, the device nominal sizes must correspond with the connection nominal sizes! /16 Siemens FI

13 DELLSONICS 北京迪妙声科技有限公司 BEJING DELLSONICS SCIENCE & TECHNOLOGY LTD. 公司简介 北京迪妙声科技有限公司 ( 原名北京妙声力科技有限公司 ), 位于北京市海淀区中关村南大街, 是与西门子公司德国总部正式签约的西门子过程仪表及分析仪器核心合作伙伴, 也是西门子北方区域规模最大 实力最强的优秀代理商 公司主营 : 一 西门子 - 妙声力 (Milltronics) 系列物位产品 : 超声波物位计 超声波液位差计 超声波泥水界面计 超声波明渠流量计 雷达物位计 射频导纳物位计 射频导纳油水界面计 ; 射频导纳物位开关 音叉式物位开关 阻旋式物位开关 ; 皮带称 固体质量流量计 冲板流量计等 二 西门子过程仪表产品 : 电磁流量计 质量流量计 超声波流量计 温度变送器 压力变送器 阀门定位器 气体分析仪等 三 德国 UWT 公司的阻旋式料位开关 音叉式料位开关 重锤式料位计等产品 四 自行研发生产超声波液位计 温度变送器 压力变送器 数显表及油田专用仪器等产品 成立于 195 年的西门子 - 妙声力公司 (Milltronics) 是世界公认的超声波物位测量领域的领导者, 全球最大的超声波物位仪表生产厂家, 在超声波 雷达 电容技术领域拥有超过 60 项专利, 超声波产品的综合性能指标经美国 控制 杂志评比, 其综合性能名列全球第一! 作为西门子公司长期稳定的代理商, 我公司有着 10 余年产品的销售和服务经验, 无论从专业技术水平 现货及备件库存量 售后服务质量 仪表维护以及故障产品国内维修能力等方面, 都具备显著的优势 尤其是我公司一流的技术支持和高效率高品质的服务体系, 在业界具有很高的知名度 如果您需要相关的产品, 需要咨询技术问题, 需要值得信赖的合作伙伴, 敬请来电垂询! 商务部总机电话 : /31/32/33, , , ( 小灵通 ) 传真 : 总机转 50 谢谢您的合作与支持! 地址 : 北京海淀区魏公村街 1 号韦伯豪家园 (100081) 电话 : /31/32/33, , 传真 : 总机转 50 sales@dellsonics.com