P1A Pneumatic Mini ISO Cylinders
|
|
|
- Melanie Bryant
- 5 years ago
- Views:
Transcription
1 P1A Pneumatic Mini ISO Cylinders According to ISO 6432 The P1A range of cylinders is intended for use in a wide range of applications. The cylinders are particularly suitable for lighter duties in the packaging, food and textile industries. Hygienic design, the use of corrosion-resistant materials and initial lubrication with our food-grade grease makes the cylinders suitable for food industry applications. Mini cylinder according to ISO 6432 Available in 10 to 25 mm bores Corrosion resistant design and low weight construction Magnetic piston as standard End stroke buffers for long service life 80
2 Careful design and high quality manufacture throughout ensure long service life and optimum economy. Mounting dimensions fully in accordance with ISO 6432 and CETOP RP52P greatly simplifies installation and world-wide interchangeability. Mini cylinder according to ISO 6432 Available in 10 to 25 mm bores Corrosion resistant design and low weight construction Magnetic piston as standard End stroke buffers for long service life Double acting buffer cushioning Operating information Working pressure: Max 10 bar Temperature range: -20 O C to +80 O C Ø10-25mm Design variants High Temperature +150 C High temperature Ø12 and 16mm -10 C to +120 C Non-magnetic piston Ø20 and 25mm -10 C to +150 C Non-magnetic piston External seals flourinated rubber -20 C to +80 C Magnetic piston Prelubricated, further lubrication is not normally necessary. If additional lubrication is introduced it must be continued. ISO Ø10mm - (M5) 10 P1A-S010DS P1A-S010DS P1A-S010DS P1A-S010DS P1A-S010DS P1A-S010DS P1A-S010DS P1A-S010DS P1A-S010DS-0125 Ø12mm - (M5) 10 P1A-S012DS P1A-S012DS P1A-S012DS P1A-S012DS P1A-S012DS P1A-S012DS P1A-S012DS P1A-S012DS P1A-S012DS P1A-S012DS P1A-S012DS-0200 Double acting adjustable cushioning 10 P1A-S016DS P1A-S016DS P1A-S016DS P1A-S016DS P1A-S016DS P1A-S016DS P1A-S016DS P1A-S016DS P1A-S016DS P1A-S016DS P1A-S016DS P1A-S020DS P1A-S020DS P1A-S020DS P1A-S020DS P1A-S020DS P1A-S020DS P1A-S020DS P1A-S020DS P1A-S020DS P1A-S020DS P1A-S020DS P1A-S020DS P1A-S020DS P1A-S025DS P1A-S025DS P1A-S025DS P1A-S025DS P1A-S025DS P1A-S025DS P1A-S025DS P1A-S025DS P1A-S025DS P1A-S025DS P1A-S025DS P1A-S025DS P1A-S025DS-0320 Cylinders are supplied complete with neck mounting and piston rod nuts. Cylinders with Through piston rods are supplied with two piston rod nuts and one neck mounting nut. Sensors For sensors see page P1A-S016MS P1A-S016MS P1A-S016MS P1A-S016MS P1A-S016MS P1A-S016MS P1A-S016MS P1A-S016MS P1A-S016MS P1A-S016MS P1A-S020MS P1A-S020MS P1A-S020MS P1A-S020MS P1A-S020MS P1A-S020MS P1A-S020MS P1A-S020MS P1A-S020MS P1A-S020MS P1A-S020MS P1A-S025MS P1A-S025MS P1A-S025MS P1A-S025MS P1A-S025MS P1A-S025MS P1A-S025MS P1A-S025MS P1A-S025MS P1A-S025MS P1A-S025MS P1A-S025MS-0320
3 Single acting push type (Spring return for retracted stroke) Ø10mm - (M5) 10 P1A-S010SS P1A-S010SS P1A-S010SS P1A-S010SS P1A-S010SS P1A-S010SS-0080 Ø12mm - (M5) 10 P1A-S012SS P1A-S012SS P1A-S012SS P1A-S012SS P1A-S012SS P1A-S012SS P1A-S016SS P1A-S016SS P1A-S016SS P1A-S016SS P1A-S016SS P1A-S016SS P1A-S020SS P1A-S020SS P1A-S020SS P1A-S020SS P1A-S020SS P1A-S025SS P1A-S025SS P1A-S025SS P1A-S025SS P1A-S025SS P1A-S025SS-0080 Single acting pull type (Spring extended for advanced stroke) 10 P1A-S016TS P1A-S016TS P1A-S016TS P1A-S016TS P1A-S016TS P1A-S020TS P1A-S020TS P1A-S020TS P1A-S020TS P1A-S020TS P1A-S025TS P1A-S025TS P1A-S025TS P1A-S025TS P1A-S025TS P1A-S025TS-0080 Design Variants Double acting options Single acting options Double-acting Ø16 - Ø25 adjustable cushioning (not for seal material type F) Double-acting Ø10 - Ø25 non-adjustable cushioning Single-acting, Spring return for retracted stroke. Non-adjustable cushioning Single-acting, Spring extended for advanced stroke Non-adjustable cushioning Ø10 - Ø25 Ø16 - Ø25 "U" style rod guidance modules, plain bearings Double-acting, adjustable Ø16 - Ø25 cushioning through rod (not for seal material type F) Double-acting, non-adjustable Ø10 - Ø25 cushioning through rod The P1A series cylinders can be equipped with an external guiding device to prevent the piston rod from turning. When fitted the guide provides a guided piston movement enabling the cylinder to resist turning moments on the piston rod, as well as greater transverse forces. 82
4 Dimensions Double and single acting cylinders Single Acting type T Through piston rod WH + stroke Single Acting type S Cylinder bore AM 0/-2 BE AF BF C CDH9 EE EW H KK L SW WH±1,2 mm mm mm mm mm mm mm mm mm mm mm M12x1, ,0 4 M5 8 13,0 M M16x1, ,8 6 M ,8 M ) 16 M16x1, ,8 6 M ,8 M ) 16 M16x1, ,8 6 M ,8 M M22x1, ,8 8 G1/ ,8 M M22x1, ,8 8 G1/ ,8 M10x1, ) P1A-S016DS/SS/TS 2) P1A-S016MS Double acting cylinders Cylinder bore XC ZJ P mm mm mm mm stroke 84 + stroke 46 + stroke stroke 99 + stroke 48 + stroke stroke stroke 53 + stroke stroke stroke 67 + stroke stroke stroke 68 + stroke Single-acting, spring return, type SS Stroke/ Cylinder bore XC XC XC XC XC XC ZJ ZJ ZJ ZJ ZJ ZJ P P P P P P mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm Single-acting, spring-extended, type TS Stroke/ Cylinder bore XC 3) XC 3) XC 3) XC 3) XC 3) XC 3) ZJ 3) ZJ 3) ZJ 3) ZJ 3) ZJ 3) ZJ 3) P P P P P P mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm ) With piston rod retracted, as shown in the dimension drawing Length tolerances ±1 mm Stroke length tolerances +1,5/0 mm 83
5 Cylinder Mountings Flange-MF8 Cylinder A B C D E F Ø mm mm mm mm mm mm mm 10 4, P1A-4CMB 12 5, P1A-4DMB 16 5, P1A-4DMB 20 6, P1A-4HMB 25 6, P1A-4HMB Foot-MS3 Cylinder A B C D E F G H I Ø mm mm mm mm mm mm mm mm mm mm 10 4, , P1A-4CMF 12 5, , P1A-4DMF 16 5, , P1A-4DMF 20 6, , P1A-4HMF 25 6, , P1A-4HMF Cover trunnion Cylinder A B h14 C D E1 F e9 G H Ø mm mm mm mm mm mm mm mm mm 10 12, P1A-4CMJZ 12 16, P1A-4DMJZ 16 16, P1A-4DMJZ 20 22, P1A-4HMJZ 25 22, P1A-4HMJZ Cover trunnion Stainless steel Cylinder A B h14 C D E F e9 G H Ø mm mm mm mm mm mm mm mm mm 10 12, P1A-4CMJ 12 16, P1A-4DMJ 16 16, P1A-4DMJ 20 22, P1A-4HMJ 25 22, P1A-4HMJ Clevis bracket AB3 Cylinder A B C D E F G H I J Ø mm mm mm mm mm mm mm mm mm 10 4, , , P1A-4CMT 12 5, , , P1A-4DMT 16 5, , , P1A-4DMT 20 6, , , P1A-4HMT 25 6, , , P1A-4HMT S=stroke Stainless Mounting nut Cylinder A B C Ø mm mm mm M12x1, M16x1, M16x1, M22x1, M22x1,
6 Cylinder Mountings Clevis AP2 Cylinder A B C D E F G H I J Ø mm mm mm mm mm mm mm mm mm mm 10 4 M4 2, ,0 2,0 P1A-4CRC 12 6 M6 3, ,0 3,0 P1A-4DRC 16 6 M6 3, ,0 3,0 P1A-4DRC 20 8 M8 4, ,5 3,5 P1A-4HRC M10x1,25 5, ,0 3,0 P1A-4JRC Swivel rod eye AP6 Cylinder A B C D E F G H I J K L Ø mm mm mm mm mm mm mm mm mm mm mm mm 10 5 M4 2, ,0 8 33,0 9 2,0 P1A-4CRS 12 6 M6 3, ,8 9 38,5 11 1,5 P1A-4DRS 16 6 M6 3, ,8 9 38,5 11 1,5 P1A-4DRS 20 8 M8 4, , ,0 14 2,0 P1A-4HRS M10x1,25 5, , ,5 17 2,5 P1A-4JRS Stainless Rod nut Cylinder D F E Ø mm mm mm 10 M4 7 2, M6 10 3, M6 10 3, M8 13 4, M10x1, , Flange MF8 Foot bracket MS3 Cover trunnion Cover trunnion Stainless steel Stainless steel mounting nut Ø 10 P1A-4CMB P1A-4CMF P1A-4CMJZ P1A-4CMJ Ø 12 P1A-4DMB P1A-4DMF P1A-4DMJZ P1A-4DMJ Ø 16 P1A-4DMB P1A-4DMF P1A-4DMJZ P1A-4DMJ Ø 20 P1A-4HMB P1A-4HMF P1A-4HMJZ P1A-4HMJ Ø 25 P1A-4HMB P1A-4HMF P1A-4HMJZ P1A-4HMJ Clevis bracket AB3 Clevis AP2 Swivel rod eye AP6 Stainless steel Rod nut Ø 10 P1A-4CMT P1A-4CRC P1A-4CRS Ø 12 P1A-4DMT P1A-4DRC P1A-4DRS Ø 16 P1A-4DMT P1A-4DRC P1A-4DRS Ø 20 P1A-4HMT P1A-4HRC P1A-4HRS Ø 25 P1A-4HMT P1A-4JRC P1A-4JRS
Stainless Steel Cylinders, ISO 6432, Bore 10-25mm - P1S
This range of stainless steel cylinders has been specially designed for use in difficult environments. Hygienic design, external seals of flourianted rubber and prelubrication with our food-industry-approved
Pneumatic Cylinders Series P1A According to ISO 6432
Pneumatic Cylinders Series P1A According to ISO 6432 Catalogue 9127006842GB-ul Cylinders Aluminium anodised end caps. Magnet for proximity sensing. Low-friction piston rod seal. Stainless steel piston
The cylinders are particularly suitable for lighter duties. High temperature. Low temperature. Packaging, food and textile industries.
ISO 643 Cylinders Description: Operating pressure: Operating temperature: Options: Applications: Advantages: Benefits: The cylinders are particularly suitable for lighter duties. Max 10 bar (145 psi).
Pneumatic cylinders Compact cylinders Series P1J
Pneumatic cylinders Series P1J Catalogue 9127007282GB-ul Through mounting holes, tapped at both ends, for cylinder mounting. Return spring for single-acting variants. Stainless steel piston rod. Low-friction
Pneumatic Cylinders. Series P1A According to ISO 6432
aerospace climate control electromechanical filtration fluid & gas handling hydraulics pneumatics process control sealing & shielding Pneumatic Series P1A According to ISO 6432 Catalogue PDE2564TCUK October
Stainless steel piston rod. Low-friction piston rod seal. ouble and single-acting versions Smooth stainless steel cylinder tube. The Parker Pneumatic
atalog 0923/NA (10/01) Stainless steel piston rod. Low-friction piston rod seal. ouble and single-acting versions Smooth stainless steel cylinder tube. The Parker Pneumatic P1A range of cylinders is intended
Twin Rod Non Rotate Cylinders RDV and AZ
Twin Rod Non Rotate Cylinders RDV and AZ A range of twin rod cylinders designed for use in non rotate applications specifially suited to the handling and packaging environments. Offering a range of double
Pneumatic Cylinders. Series P1A - Ø10 to Ø25 mm According to ISO 6432
aerospace climate control electromechanical filtration fluid & gas handling hydraulics pneumatics process control sealing & shielding Pneumatic Cylinders Series P1A - Ø10 to Ø25 According to ISO 6432 Catalogue
Single-acting and double-acting, magnetic Series 94: ø 16, 20, 25 mm Series 95: ø 25 mm, cushioned
> Series 94 and 95 stainless steel cylinders CATALOGUE > Release 8.7 Series 94 and 95 stainless steel mini-cylinders Single-acting and double-acting, magnetic Series 94: ø 6, 20, 25 mm Series 95: ø 25
AIR CYLINDER Series A12, A13
A12 - Non magnetic A13 - Magnetic S Double Acting ( Ø32-100 ) mm As per ISO 6431 / CETOP RP43P, RP53P standards Features Adjustable cushioning at both ends Wide varieties of mountings Low friction Long
AIR CYLINDER Series A75, A76
A76 - n-magnetic A75 - Magnetic AIR CYLINDER Round s - Ø32, 40, 50 and 63 mm Double Acting with Adjustable Cushioning Features Available in magnetic and n magnetic version Adjustable cushioning at both
Magnetic cylinders Series 27 1/ Double-acting, magnetic ø 20, 25, 32, 40, 50, 63 mm
CATALOGUE > Release 8.5 > Cylinders Series 27 Magnetic cylinders Series 27 Double-acting, magnetic ø 20, 25, 32, 40, 50, 63 mm»» Reduced dimensions»» Different mounting options»» Perfect alignment, perfect
AIR CYLINDER Series A23, A24
A23 - Magnetic A24 - Non-magnetic Double Acting s (Square type) Ø32-125 mm As per ISO 15552 / VDMA 24562 standards. Features Adjustable cushioning at both ends with elastomer pads Wide varieties of mountings
PNEUMATIC CYLINDERS CYLINDERS ISO solutions SERIES 21 SERIES 21 CYLINDERS ISO 15552
PNEUMATIC CYLINDERS 1 2 3 4 SERIEs 21- General Information 32-100 mm diameter 21 series cylinders are manufactured to ISO 15552 standard which specifies interchangeable mounting dimensions. The cylinder
Cylinders Series 61 - Aluminium profile
CATALOGUE > Release 8. Cylinders Series 6 - Aluminium profile MOVEMENT > Cylinders Series 6 Single, double-acting, magnetic, cushioned ø 32, 40, 50, 63, 80, 00, 25 (ISO 5552)» ISO 5552 (corresponding to
Pneumatic Cylinders. Series P1A According to ISO 6432
aerospace climate control electromechanical filtration fluid & gas handling hydraulics pneumatics process control sealing & shielding Pneumatic Series P1A According to ISO 6432 Catalogue PDE2564TCUK-ul.
Aluminium profile. Double-acting, cushioned, magnetic ø mm
> Series 4 cylinders Series 4 cylinders - Aluminium profile Double-acting, cushioned, magnetic ø 60-200 mm»» In compliance with ISO 643/ VDMA 24562 standards»» Rolled stainless steel rod»» Adjustable pneumatic
AIR CYLINDER Series A25, A26
A25 - Magnetic A26 - Non-magnetic S Double End Double Acting - Ø32-100 mm As per ISO 15552 / VDMA 24562 standards Features Adjustable cushioning at both ends with elastomer pads Wide varieties of mountings.
Bore ø 32, 40, 50, 63, 80, 100, 125 Ports 32 = 1/8, 40/50 = 1/4, 63/80 = 3/8, 100/125 = 1/2
6 S E R I E S Cylinders Series 6 Catalog 2006 Single, double acting, magnetic (DIN/ISO 643) Bore: ø 32, 40, 50, 63, 80, 00, 25 cushioned [ /4, 9/6, 2, 2 /2, 3 /8, 4, 5 inch approximations] The Series 6
Single- and double-acting, cushioned, magnetic ø 32, 40, 50, 63, 80, 100 and 125 mm
> Series 90 stainless steel cylinders CATALOGUE > Release 8.8 Series 90 stainless steel cylinders Single- and double-acting, cushioned, magnetic ø 32, 40, 50, 63, 80, 00 and 25 mm» In compliance with ISO
Single and double-acting, magnetic, cushioned Standard, low friction, low temperatures and tandem versions ø 32, 40, 50, 63, 80, 100, 125mm
CATALOGUE > Release 8.8 > Series 60 cylinders Series 60 cylinders Single and double-acting, magnetic, cushioned Standard, low friction, low temperatures and tandem versions ø 32, 40, 50, 63, 80, 00, 25mm»»
Aluminium profile. TANDEM: Double thrust and traction forces. LOW FRICTION: Friction force reduced by over 40%
CATALOGUE > Release 8.7 > Series 6 cylinders Series 6 cylinders - Aluminium profile Single and double-acting, magnetic, cushioned Standard, low friction, low temperatures and tandem versions ø 32, 40,
Single and double-acting, magnetic, cushioned Standard, low friction and low temperature versions ø 32, 40, 50, 63, 80, 100, 125mm
CATALOGUE > Release 8.6 > Series 60 cylinders Series 60 cylinders New version Single and double-acting, magnetic, cushioned Standard, low friction and low temperature versions ø 32, 40, 50, 63, 80, 00,
Our policy is one of continued research and development. We therefore reserve the right 1/98 N
ISO Cylinders Magnetic Piston Single Acting Ø 10 to 25 mm Magnetic piston as standard Conforming to ISO 6432 Corrosion resistance Nose mounting nut and piston rod locknut as standard Technical Data Medium:
Our policy is one of continued research and development. We therefore reserve the right 10/99 N
Stainless Steel ISO Cylinders Magnetic Piston Double Acting Ø 12 to 25 mm High corrosion and acid resistance Magnetic piston as standard Conforming to ISO 6432 Suitable for applications in the Food Industry
Pneumatic cylinders Series P1J Compact cylinders. Catalogue PDE2561TCUK-ul December 2006
Pneumatic cylinders Series P1J Compact cylinders Catalogue PDE261TCUK-ul December 26 PDE261TCUK-ul Features Air Hydraulic Electro cylinder cylinder mechanical actuators Overload safe *** *** * Easy to
Double acting, cushioned, magnetic Ø mm
CATALOGUE > Release 8.7 > Series 40 cylinders Series 40 cylinders Double acting, cushioned, magnetic 60-200 - 250-320 mm In compliance with ISO 5552 standards and with the previous DIN/ISO 643 - VDMA 24562
Strokes Strokes Double acting. Min. stroke with 2 sensors Ø Single acting. Single acting
S version Type... Standards... Cushioning... Rated temperature... Fluid... Working pressure... Proximity switch... Mounting and accessories... Materials... Single and double acting pneumatic microcylinders,
Aluminium profile. Double-acting, magnetic, cushioned ø 32, 40, 50, 63, 80, 100 mm
> Series 62 cylinders CATALOGUE > Release 8.6 Series 62 cylinders - Aluminium profile Double-acting, magnetic, cushioned ø 32, 40, 50, 63, 80, 00 mm»» In compliance with ISO 5552 standards and with the
Series 32 compact magnetic cylinders 1/ Single and double-acting, non-rotating ø 20, 25, 32, 40, 50, 63, 80, 100 mm
Series 32 compact magnetic cylinders Single and double-acting, non-rotating ø 20, 25, 32, 40, 50, 63, 80, 00 mm»» In compliance with ISO 2287»» Compact design»» Wide range of models available in different
P1P Short Build Compact Cylinders
P1P Short Build Compact Cylinders According to ISO 21287 The P1P Series is a complete range of ISO 21287 compact cylinders developed to meet the highest requirements for quality and performance. The careful
Aluminium tube and profile
> Series 63 cylinders CATALOGUE > 206 Series 63 cylinders - Aluminium tube and profile New Single and double-acting, magnetic, cushioned Versions: standard, low friction, high and low temperatures ø 32,
Series 16: ø 8, 10, 12 mm Series 24: ø 16, 20, 25 mm - magnetic Series 25: 16, 20, 25 mm - magnetic, cushioned
> Series 6, 24 and 25 mini-cylinders Series 6, 24 and 25 mini-cylinders Series 6: ø 8, 0, 2 mm Series 24: ø 6, 20, 25 mm - magnetic Series 25: 6, 20, 25 mm - magnetic, cushioned» Single-acting and double-acting»
RA/28000, RA/ Pneumatic Cylinders ISO 6431, VDMA and NFE Non-magnetic and Magnetic, Single Acting 32 to 100 mm
Pneumatic Cylinders ISO 6431, VDMA 24562 and NFE 49-003-1 Non-magnetic and Magnetic, Single Acting 32 to 100 mm ugged tie rod construction Polyurethane seals ensure efficient low friction operation and
Series 6PF Positioning Feedback cylinders 1/ Double-acting low friction, magnetic ø 50, 63, 80, 100, 125 mm
CATALOGUE > Release 8.8 > Series 6PF cylinders Series 6PF Positioning Feedback cylinders Double-acting low friction, magnetic ø 50, 63, 80, 00, 25 mm»» In compliance with ISO 5552 standards and with the
Stainless steel Cylinders Series 90
90 S E R I E S Catalogue 200 Stainless steel Cylinders Series 90 DIN/ISO 643 Single and double-acting (magnetic) ø 32, 40, 50, 63, 80, 00 and 25 cushioned Stainless steel cylinders Series 90 ø 32, 40,
Stainless steel Pneumatic cylinders
aerospace climate control electromechanical filtration fluid & gas handling hydraulics pneumatics process control sealing & shielding Stainless steel Pneumatic cylinders Series P1S ccording to ISO Catalogue
Stainless steel Pneumatic cylinders
aerospace climate control electromechanical filtration fluid & gas handling hydraulics pneumatics process control sealing & shielding Stainless steel Pneumatic cylinders Series P1S ccording to ISO Catalogue
DN series - Standard cylinder
series - cylinder Double piston packing type series ISO-431 specification series Provide CAD external dimension. DMB DU K Rod Locking his product : E End lock Use for longer stroke request DCK2 DCQ Pin
Profile Design Air Cylinder
Profile Design Air Cylinder Series CP5 ø, ø, ø, ø, ø, ø Features Conforms to VDMA 24 562 (parts 1 and 2), ISO 6431 and CETOP standards. Combines lightweight profile barrel design with enclosed tie rods
RA/192000/M. Compact cylinder ISO Magnetic piston, double acting Ø 20 to 125 mm
Compact cylinder ISO 2287 Magnetic piston, double acting Ø 20 to 25 mm Conforms to ISO 2287 M/50 switches can be mounted flush with the profile Magnetic piston as standard Seals ensure low friction operation
SHORT STROKE CYLINDERS, Ø 20 to 100 mm
SHORT STROKE CYLINDERS, 0 to mm SINGLE AND DOUBLE ACTING CONFORMING WITH AFNOR NF E 49-004 STANDARDS SERIES 44 - TYPE : KN PA16-GB-R Series 44 Type: KN Cylinders conforming with new NF E 49-004-1 standards
ZBD 2512 Differential Cylinder Data sheet 07.16/DS13660
ZBD 2512 Differential Cylinder Data sheet 07./DS Description: The STORZ hydraulic cylinder series ZBD 2512 for the nominal pressure of 250 bar is replaceable with the CDH1 series. By fixing the mounting
PRA/181000, PRA/181000/M PRA/183000, PRA/183000/M
PA/181000, PA/181000/M PA/183000, PA/183000/M Profile barrel with concealed tie rods Pneumatic Cylinders ISO 6431, VDMA 24562 and NFE 49-003-1 Non-magnetic and Magnetic Piston Single Acting 32 to 100 mm
M/1000, Heavy Duty Cylinders Double Acting
> > Ø 2 to 12 (50 to 305 mm) > > Extremely rugged heavy duty construction - ideal for use in the most arduous conditions. > > Large range of bore sizes - ideal for a wide variety of industrial applications.
Large Bore Extruded Cylinders, ISO 6431 Series 41
Large Bore Extruded Cylinders, ISO 6431 Series 41 Double-acting cushioned, magnetic ø160-200 (DIN/ISO 6431)»» DIN/ISO 6431 VDMA 24562»» Rolled stainless steel rod»» Adjustable cushioning Cylinders Series
ISO PNEUMATIC CYLINDERS PAC-Y SERIES Ø32 - Ø125
ISO 15552 PNEUMATIC CYLINDERS PAC-Y SERIES Ø32 - Ø125 PAC-Y GENERAL INFORMATION PAC-Y SERIES ISO 15552-32 - 125 CUSHIONING CYLINDER ELOXAL PLATE AND SPECIAL ROD SEAL PROVIDING HYGIENE AND LONG WORKING
Pneumatic cylinders series CX Double acting with magnetic piston, ISO 15552, stainless steel G1/8 to G1/2 piston Ø 32 to 100 mm
Pneumatic cylinders series CX Double acting with magnetic piston, ISO 15552, stainless steel 000 400 Order code CX-032-0250-000 Note: Piston Ø 125, 160 and 200 on request. Series Piston Ø Stroke length
Series 63 ISO cylinders
Series 63 ISO 15552 cylinders New versions Single and double-acting, magnetic, cushioned ø 32, 40, 50, 63, 80, 100, 125 mm In compliance with the ISO 15552 standard Weight reduced by 25% Low noise More
Single and double-acting, cushioned, magnetic. ø 32, 40, 50, 63 mm
> Series 97 stainless steel cylinders CATALOGUE > Release 8.7 Series 97 stainless steel cylinders Single and double-acting, cushioned, magnetic. ø 32, 40, 50, 63 mm»» Clean design»» Stainless steel AISI
Series 83. Stainless Steel Mini Cylinder
Stainless Steel Mini Cylinder Magnet included in 7/8 and 1-1/4 bore only in double acting cylinder THEORETICAL CYLINDER FORCE (LBS). Operating Pressures (PSI) Size Action 25 50 75 100 125 150 3/4" Out
compact magnetic cylinders
CATALOGUE > Release 8.7 > Series 32 cylinders Series 32 compact magnetic cylinders Single and double-acting, non-rotating ø 20, 25, 32, 40, 50, 63, 80, 00 mm»» In compliance with ISO 2287»» Compact design»»
12/95 N Our policy is one of continued research and development. We therefore reserve the right
Pneumatic Cylinders ISO 6431, VDMA 24562 and NFE 49-003-1 Non-magnetic and Magnetic, Double Acting 32 to 125 mm Cylinders to VDMA Standard 24562, ISO 6431 and NFE 49-003-1 New polyurethane seals ensure
ISOCLAIR ROUND CYLINDERS Ø 8 to 25 mm - single acting ISO 6432-CETOP-AFNOR
ISOCLAIR ROUND CYLINDERS to mm - single acting ISO 6432-CETOP-AFNOR FEATURES Good resistance to corrosive elements (barrel and stainless steel rod) SER SES Series 435 Type C-AS C-AS/DM GENERAL Detection
Round Body Minicylinders, DIN/ISO 6432 Series 16, 24 and 25
Round Body Minicylinders, DIN/ISO 6432 Series 16, 24 and 25 Series 16: ø 8-10 - 12 bumpers Series 24: ø 16-20 - 25 bumpers and magnetic piston Series 25: ø 16-20 - 25 adjustable cushion and magnetic piston»»
Our policy is one of continued research and development. We therefore reserve the right to amend,
Airmotor (Oscillator) with integrated switches Double acting Ø 50... 100 mm Complete functional unit for oscillating movement Conforms to ISO 6431 and VDMA 24562 Integrated 5/2 valve Frequency and speed
Tube connection Ambient temperature range Medium temperature range. T min C +80. C T max. max. Weight (mass) kg See table
Cylinder Ø32-125 mm with blocking device Series DZB... Blocking reverse stroke Series DZBA... Blocking forward stroke Mountings to ISO 15552 (ISO 6431) Special versions: according to CETOP RP 53 P (Piston
KA/8000, KA/8000/M. Cylinder Variants. Model Codes. Standard Strokes. Warning 7/97 N/UK
Stainless Steel VDMA/ISO Cylinders Non-magnetic and magnetic Piston Double Acting Ø 32 to 200 mm High corrosion and acid resistant Conforming to Standards ISO 6431, VDMA 24562 and NFE 49-003-1 Ideal for
ISOCLAIR ROUND CYLINDERS Ø 8 to 25 mm - single acting ISO 6432-CETOP-AFNOR
ISOCLAIR ROUND CYLINDERS to mm - single acting ISO 6432-CETOP-AFNOR FEATURES Good resistance to corrosive elements (barrel and stainless steel rod) GENERAL Detection Equipped or not for magnetic position
Description. Piston rod end. Technical data. Datasheet Type 46 Single rod cylinder according to ISO 6022 / DIN 24333
CE CV LE MM KF MM KK Datasheet Type 46 Single rod cylinder according to ISO 6022 / DIN 24333 Description - Standard cylinder to ISO 6022, DIN 24333 - Strokes up to 2000 mm - Piston diameter: 40 320 mm
Short-stroke cylinders ADVC/AEVC
Short-stroke cylinders ADVC/AEVC q/w Worldwide: Superb: Easy: Festo core product range Covers 80% of your automation tasks Always in stock Festo quality at an attractive price Reduces procurement and storing
LPRA/182000/M Double acting profile cylinders Ø mm
Double acting profile cylinders 32... 125 mm High performance, stability and reliability M/50 switches (solid state) can be mounted flush with the profile Cylinders and mountings conform to ISO 15552 (ISO
RM/57200/M, RT/57200/M
Roundline Cylinders Magnetic Piston Double Acting Ø 8 to 63 mm Three different basic versions provide flexibility and wide range of application Magnetic piston as standard provides a wide range of control
HEAVY DUTY PNEUMATIC CYLINDERS
HEAVY DUTY PNEUMATIC CYLINDES Features: Conforms to ISO:30 standard. Double Acting, with adj. cushioning at both ends. Sizes: Ø, Ø, Ø, Ø, Ø, Ø0, Ø1, Ø0, Ø0 & Ø0. : Other bore sizes on request Seamless
RM/900/M Heavy duty cylinders Ø 1 1/4... 4
Heavy duty cylinders Ø 1 1/4... 4 Heavy duty cylinder ideal for a wide range of rail applications Extensive range of mountings Rugged, reliable long established design Magnetic piston as standard Mounting
S: With magnet. Bore x stroke (basic type) Cushion P: pneumatic adjustable
series MK Standard cylinders according to ISO 15552 How to order? M K A P S 50 x 100 M: Marani A: Double acting S: With magnet Bore x stroke (basic type) K: According to ISO 15552, Mickey-mouse type Cushion
Aluminium profile. Double-acting, magnetic, cushioned ø 32, 40, 50, 63, 80, 100 mm
> Cylinders Series 62 CATALOGUE > Release 8.5 Cylinders Series 62 Aluminium profile Double-acting, magnetic, cushioned ø 32, 40, 50, 63, 80, 00 mm»» In compliance with ISO 5552 standards and with the previous
L INEAR ACTUATORS: AIR CYLINDERS SERIES C Bar. Carbon steel Hard chrome finish Ø20, Ø25 bores only ORDER LINES
1-45 A IR CYLINDER BORE SIZES: Ø8, 10, 12, 16, 20, 25 Conforms to CETOP RP52P and ISO 6432 standards Double or single acting models High speed actuation Auto switch sensing optional Special shaped rod
10/97 N Our policy is one of continued research and development. We therefore reserve the right
ISO Cylinders Magnetic Piston Double Acting Ø 10 to 25 mm Magnetic piston as standard Conforming to ISO 6432 Corrosion resistance Buffer and adjustable cushioned models Supplied complete with nose mounting
RA/8000, RA/8000/M. Pneumatic cylinders ISO 6431, VDMA and NFE Non-magnetic and magnetic piston Double acting Ø 32 to 320 mm
Pneumatic cylinders ISO 6431, VDMA 456 and NFE 49-003-1 Non-magnetic and magnetic piston Double acting Ø 3 to 30 mm Comprehensive range for the utmost versatility Conforms to DIN ISO 6431, VDMA 456 and
PRA/181000, PRA/181000/M PRA/183000, PRA/183000/M
PA/181000, PA/181000/M M/50 switches can be mounted flush with the profile Conforms to DIN ISO 6431 and VDMA 24562 part 1 Mountings conform to DIN ISO 6431, VDMA 24562 part 2 and NFE 49-003-1 Polyurethane
Pneumatic cylinders, piston-ø mm Double acting with magnetic piston DIN ISO 15552
Pneumatic cylinders, piston-ø 32 100 mm Double acting with magnetic piston DIN ISO 15552 Technical data for series SL 050 450 Order code SL-032-0250-050 Series Piston-Ø Stroke length (mm) Type of cylinder
P1D-B Pneumatic Cylinders
P1D-B Pneumatic Cylinders According to ISO 15552 P1D-B series. This series features a profile design and is the basic ISO cylinder for simple applications where no special options are required. This series
Compact cylinders series NYD Double acting with magnetic piston, ISO M5 to G1/8 Piston Ø 20 to 100 mm
Compact cylinders series NYD Double acting with magnetic piston, ISO 21287 M5 to G1/8 Piston Ø 20 to 100 mm 200, 210 220 600, 610 620 Order code NYD-032-125-210 High force cylinder series NYDK and multiple
NFPA Double acting imperial cylinders
> > Ø 4... 8 > > Adjustable captive cushion needle > > Constructed of the finest materials > > Magnetic piston standard > > Wide temperature range > > Shock and vibration tested to N 61373, Category 1,
P1M Series. Extra Low Profile Pneumatic Cylinder P1M. Tooling Plate P1M. Swing Clamp P1M. Contents
Series xtra Low Profile Pneumatic Cylinder P1G C05(S) LP(M) Swing Clamp Tooling Plate Contents Features...4 Ordering Information...5 Specifications...6 Technical Data...7 Dimensions... 8-11 Mounting Dimensions...
Available: Cylinders till july 2000 Spares till july /98 N
Available: Cylinders till july 2000 RM/55400/M Roundline Cylinders Magnetic Piston Double Acting 32 to 100 mm bore Magnet piston as standard provides a wide range of control options Attractive clean- line
Series 31 compact cylinders 1/
Series 3 compact cylinders Double and single-acting, double-acting non-rotating, magnetic ø2, 6, 20, 25 mm ø 32, 40, 50, 63, 80, 00 mm UNITOP The compact dimensions allow Series 3 single and double-acting
PRA/182000, PRA/182000/M
Profile cylinders conforms to ISO 15552 Non-magnetic and magnetic piston Double acting Ø 32 to 125 mm High performance, stability and reliability M/50 switches can be mounted flush with the profile Cylinders
Guide blocks for ISO/VDMA cylinders
Actuators Guide blocks or ISO/VDMA cylinders QA/8/51/ QA/8/61/ QA/8/81/ (long coupling) QA/8/85/ (short coupling) Ø 32 to 1 mm QA/8/61/ QA/8/51/ Conorms to ISO 6431, VDMA 24562 and NFE 49 3 1 Ensures protection
Hydraulic cylinders Tie rod design. Type CD70 / CG70. Features. Contents
Hydraulic cylinders Tie rod design Type CD / CG Features types of mounting Piston Ø (ØAL)... mm Piston rod Ø (ØMM) 12... 1 mm Stroke length up to 3 m Project planning software Interactive Catalog System
Pneumatic cylinders, piston-ø 8 25 mm Single acting DIN ISO 6432
Pneumatic cylinders, piston-ø 25 mm Single acting DIN ISO 6432 Technical data for series HE Order code HE-16-025 Series Piston-Ø Stroke length (mm) Design and function Single acting pneumatic cylinder
Medium Duty 1.5 ~ 4 Bore 12 Different NFPA Mounting Options Non-Rotating Option Tandem Cylinder Option Auto Switch Capable
N304 Air Cylinder NCA1 Series NFPA Interchangeable Medium Duty 1.5 ~ 4 Bore 12 Different NFPA Mounting Options Non-Rotating Option Tandem Cylinder Option Auto Switch Capable NFPA Interchangable Air Cylinder
Stainless steel cylinders
Stainless steel cylinders Corrosion-resistant in harsh ambient conditions Easy-to-clean design Wide choice of variants Comprehensive range of accessories 2017/10 Subject to change Internet: www.festo.com/catalog/...
Stainless steel Pneumatic cylinders
aerospace climate control electromechanical filtration fluid & gas handling hydraulics pneumatics process control sealing & shielding Stainless steel Pneumatic cylinders Series P1S ccording to ISO P1S
ISO 6020/2 industricylindre Industrial cylinders
According to ISO 6020/2 1991 DIN 24554, compact series 160 bar Working pressure up to 21 Mpa Maximum pressure 25 Mpa Working temperature 20 to 80 C Stroke tolerance 0 to 1.2mm for strokes up to 1000mm,
Standard cylinders DNG/DNGZS, ISO 15552
Features Brief description Double-acting For contactless position sensing With adjustable end-position cushioning at both ends Robust tie rod design Standards-based cylinders to ISO15552 (corresponds to
ACT-74. Short stroke cylinders DC/91000/M, DC/93000/M Single acting Ø mm. Actuators DC/9 / /
Actuators Short stroke cylinders DC/91000/M, DC/93000/M Single acting Ø 12... 63 mm One third the basic length of a corresponding ISO/VDMA model Low friction, long life seal design Fully non-corrodible
Tie-rod Cylinders, ISO 6431, ISO compliant Series 60
Tie-rod Cylinders, ISO 6431, ISO 15552 compliant Series 60 Single or double-acting, magnetic, cushioned Standard and low friction versions ø 32, 40, 50, 63, 80, 100, 125 mm In compliance with ISO 15552
Pneumatic Cylinders. Series P1D-T Tie Rod Line - Ø32 to Ø320 mm According to ISO 15552
aerospace climate control electromechanical filtration fluid & gas handling hydraulics pneumatics process control sealing & shielding Pneumatic Cylinders Series P1D-T Tie Rod Line - Ø32 to Ø320 According
Extruded Body Cylinders, ISO 6431, ISO compliant Series 61
1 ISO / VDMA Cylinders NORTH AMERICAN CYLINDER & ACTUATOR CATALOG > Release 8.5 Extruded Body Cylinders, ISO 6431, ISO 15552 compliant Series 61 Single or double-acting, magnetic, cushioned Standard and
Series QP - QPR short-stroke cylinders 1/ Series QP: single and double-acting
CATALOGUE > Release 8.7 > Series QP - QPR cylinders Series QP - QPR short-stroke cylinders Series QP: single and double-acting, magnetic Series QPR: double-acting magnetic, non-rotating ø 2, 6, 20, 25,
P1E Series ISO Cylinders
High fibre nitrile Combined cushion/ Aluminium tube to Zinc diecast end plates Retained cushion piston rod seal non return seal for give high strength on 32, & 50mm bore adjusting screw allows a and polyurethane
Short-stroke cylinder, Series SSI Ports: M5 - G 3/8 double-acting with magnetic piston Cushioning: elastic Piston rod: Internal thread
Ports: - G 3/8 double-acting with magnetic piston Cushioning: elastic Piston rod: Internal thread 1 Standards ISO 15524 Compressed air connection Internal thread Ambient temperature min./max. - C / +80
VERSION 1 / Basic cylinder T Double push tandem R Through rod F Hollow through rod. VERSION 2 D Double acting S Single acting front spring
Compact cylinders to AFNOR NF E49-004- DESCRIPTION Cylinders series BU are available from Ø 20 to Ø 00 and, complying with AFNOR NF E49-004-, they re interchangeable also without using anchorages. Besides
Short Build Pneumatic Cylinders P1M Series
Short Build Pneumatic Cylinders P1M Series Catalogue 9127007612GB-ul Cylinders Food approved grease. Integral air channels. Flexible porting options. Smooth exterior design. Integral low profile sensor
ANTI-CORROSIVE CYLINDERS WITH TIE RODS Ø 32 to 125 mm - double acting - ISO with adjustable pneumatic cushioning
ANTI-CORROSIVE CYLINDERS WITH TIE RODS 32 to 125 mm - double acting - ISO 15552 with adjustable pneumatic cushioning NS Series S FEATURES The cylinders are designed for use in corrosive environments: chemical,
Stainless steel cylinders
Stainless steel cylinders Corrosion-resistant in harsh ambient conditions Easy-to-clean design Wide choice of variants Comprehensive range of accessories 2017/12 Subject to change Internet: www.festo.com/catalogue/...
Stainless steel cylinders
P1S Stainless steel cylinders Ø 10-125 mm Stainless steel Pneumatic cylinders Series P1S ccording to ISO FLUIDTECHNIK OHEMI s. r. o. Olomoucká 87 tel : 548 213 233-235 CZ-627 00 rno fax : 548 213 238 http://www.fl
PURAKAL SERIES 100 TABLE OF CONTENTS
TABLE OF CONTENTS How to Order Cylinder......................... Repair Kit......................... Seal Kit......................... Warranty......................... Parts List.........................