Spool valves manually and mechanically actuated G 1/8 - G 1/4 - G 1/2
|
|
- Tracey Harvey
- 5 years ago
- Views:
Transcription
1 Spool valves manually and mechanically actuated G 1/8 - G 1/4 - G 1/2 Valves series "EK" are produced in the, and pneumatic functions; the kind of construction is based on a balancee! spool. In the mechanically actuated versión these valves are available only for the size G 1/8 and G 1/4, while the manually actuated versions are available in the different sizes and they are suitable for panel mounting (except for size G 1/2). TECHNICAL DATA Operating pressure 0+10 bar bar Working temperature C (con aria secca -20 C) Fluid Filtered, unlubricated or continuous lubricated compressed air Port size G 1/8 - G 1/4 - G 1/2 Nominal diameter G 1/8 = 5 mm G 1/4 = 8 mm G 1/2= 12 mm Mee han cal Plunger; roller ; whlsker; released pressure key Manual ; front ; lateral ; actuatorsfor panel mounting (see on page 3.6) SEALS KIT 3 port G 1/8 EK/M/SG/8 5 port G 1/8 EKCA/M/SG/8 3 port G 1/4 EK/M/SG/4 5 port G 1/4 EKCA/M/SG/4 5 port G 1/2 EKCA/M/SG/2 MATERIALS Bottoms Body Distance rings Springs Seáis Spool Lever; Ball Whisker Released pressure key Plunger Bellows Knobs; Handgrips : aluminium alloy or plástic - Rear: aluminium alloy Anodized aluminium alloy Acetal resin Galvanized steel NBR rubber Anodized aluminium alloy Steel Stainless steel Anodized aluminium alloy Brass Elastomer Plástic material Ball bearing (plástic material upon request) FLOWCHART- EKG 1/8 Spool valves series EK Polígono Indutrial O Rebullón sin Mos - España - rodavigo@rodavigo.com
2 Symbol Function Pilot Return Actuation forcé at 6bar(N) Flow rate at 6barAP = 1 bar (Nl/min) Weight ra) TYPE Plunger EK8/PS Plunger Plunger EK8/PSS Plunger EKCA8/PS Plunger Plunger EKCA8/PSS 1* EK8/LR* EK8/LRLR* EKCA8/LR* EKCA8/LRLR* Piloted whisker 1, EKA8/A EKC8/A Piloted whisker 1, EKCA8/A Piloted released pressure key 1, EKA8/TD EKC8/TD Piloted released pressure key 1, EKCA8/TD l 3 Piloted plunger for panel mounting 1, EKA8/Q EKC8/Q 5^p Piloted plunger for panel mounting 1, EKCA8/Q - ADD THE LETTER - ADD THE LETTER U" TO THE TYPE TO ORDER THE UNIDIRECTIONAL ROLLER VALVES - E.G.: EKCA8/LRLRU N" TO THE TYPE TO ORDER THE VALVES WITH PLASTIC ROLLER - E.G.: EK8/LRN pool valves series
3 - ADD THE LETTER "U" TO THE TYPE TO ORDER THE UNIDIRECTIONAL ROLLER VALVES - E.G.: EKCA8/LRLRU ADD THE LETTER "N" TO THE TYPE TO ORDER THE VALVES WITH PLASTIC ROLLER - E.G.: EK8/LRN pool valves series
4 EKCA8/TD * IT IS POSSIBLE TO INCREASE THE SENSITIVITY OF THE KEY USING A 0 3 mm EXTENSION ON THE SAME KEY EKC8/Q - EKA8/Q * IT IS POSSIBLE TO INCREASE THE SENSITIVITY OF THE KEY USING A 0 3 mm EXTENSION ON THE SAME KEY EKCA8/Q P.S.: SEE ACTUATORS FOR PANEL MOUNTING ON PAGE 3.6 P.S.: SEE ACTUATORS FOR PANEL MOUNTING ON PAGE 3.6 Spool valves series EK Polígono Indutrial O Rebullón sin Mos - España - rodavigo@rodavigo.com
5 MANUALLY ACTUATED VALVES G 1/8 Symbol Function Pilot Return Flow rate at6barap= 1 bar (Nl/min) Weightfa) TYPE i «i i: 155 EK8/T 1 *3 155 EK8/TF 185 EKCA8/T 185 EKCA8/TF 150 EK8/MV 150 EK8/MVF 185 EKCA8/MV 5 f EKCA8/MVF 2 i 155 EK8/M 185 EK8/MF 205 EKCA8/M 205 EKCA8/MF closed centre EKCA8/MS stable closed centre 205 EKCA8/MSF open centre 205 EKCA8/MA stable open centre EKCA8/MAF Spool valves series EK Polígono Indutrial O Rebullón sin Mos - España - rodavigo@rodavigo.com
6 G 1/8-3 and 5 PORT senes Spool valves series EK Polígono Indutrial O Rebullón sin Mos - España - rodavigo@rodavigo.com
7 Symbol Function Pilot Return Actuation forcé at 6bar(N) Flow rate at 6barAP = 1 bar (Nl/min) Weight fe TYPE EK4/PS 9, EK4/PSS EKCA4/PS 9, EKCA4/PSS EK4/LR* EK4/LRLR* EKCA4/LR* EKCA4/LRLR* ADD THE LETTER "N" TO THE TYPE TO ORDER THE VALVES WITH PLASTIC ROLLER - E.G.: EK4/LRN EK4/PS bpool valves series EK.
8 ' ADD THE LETTER "N" TO THE TYPE TO ORDER THE VALVES WITH PLASTIC ROLLER - E.G.: EK4/LRN pool valves series
9 Symbol Function Pilot Return Flow rate at6barap = 1 bar (Nl/min) Weightfa) TYPE EK4/T 240 EK4/TF EKCA4/T EKCA4/TF 230 EK4/MV EK4/MVF 185 EKCA4/MV EKCA4/MVF 255 EK4/M EK4/MF 310 EKCA4/M 310 EKCA4/MF closed centre EKCA4/MS stable closed centre 310 EKCA4/MSF open centre 310 EKCA4/MA stable open centre EKCA4/MAF Spool valves series EK Polígono Indutrial O Rebullón sin Mos - España - rodavigo@rodavigo.com
10 Spool valves series EK 3.17
11 bpool valves series EK.
Poppet valves pilot and solenoid actuated G 1/8 - G 1/4 - G 1/2 - G 1
Poppet valves pilot and actuated G 1/8 - G 1/4 - G 1/2 - G 1 Valves series "UK" are produced in trie 2/2, 3/2 and functions. In trie 3 port control versión with small pilot system, sizes G 1/8 and G 1/4,
More informationMEV. Spool compact valves pilot and solenoid actuated G 1/8 and to VDMA standards size 02. ; i \\\.; I. Spool compact valves series MEV
MEV Spool compact valves pilot and solenoid actuated G 1/8 and to VDMA 24563 standards size 02 Valves series "MEV" have been designed to satisfy trie need of ntegration between pneumatics and electronics.
More informationSpool valves pilot and solenoid actuated G 1/8 - G 1/4 - G 1/2
Series EK Spool valves pilot and solenoid actuated G 1/8 - G 1/4 - G 1/ DESCRIPTION Valves series "EK" are produced in the 3/, and pneumatic functions. Thanks to a suitable bracket, the piloting solenoid
More informationPoppet valves manually and mechanically actuated G 1/8 - G 1/4 - G 1/2
Poppet valves manually and mechanically actuated - - DESCRIPTION Valves series "CA" are produced in the /2, /, and 5/ pneumatic functions. The poppet kind of construction and the very rugged control allow
More informationMINIVALVES, MECHANICALLY AND HAND OPERATED SERIES VME
MINIVALVES, MECHANICALLY AND HAND OPERATED SERIES VME Minivalves with / NO NC poppet, Installation in any position Push-in fittings for pipe Ø 4 mm and on the valve body Low actuation force Rapid, accurate
More informationMechanically actuated valves
Mechanically actuated valves 3/2-5/2 spool valves with 1/8-1/4" NPT threaded ports BSP version avaiable on request Installation in any position Comprehensive range of actuations, direct or servo-piloted
More informationMANUALLY AND MECHANICALLY OPERATED VALVES Product Index
MANUALLY AND MECHANICALLY OPERATED VALVES Product Index Function pipe connections type of operator technology ports/positions * - instant fittings O.D. (mm) w - internal thread ØG * ØG NC NO /8 / /8 Manually
More informationseriesuk Poppet valves pilot and solenoid actuated G 1/8 - G 1/4 - G 1/2 - G 1
seriesuk Poppet valves pilot and actuated G 1/8 - G 1/4 - G 1/ - G 1 DESCRIPTION Valves series "UK" are produced in the /, 3/ and 5/ functions. In the 3 port control version with small pilot system, sizes
More informationseries UK Poppet valves pilot and solenoid actuated G 1/8 - G 1/4 - G 1/2 - G 1 DESCRIPTION MATERIALS TECHNICAL DATA Poppet valves series UK
DESCRIPTION Valves series UK are produced in the /, 3/ and 5/ functions. In the 3 port control version with small pilot system, sizes G 1/8 and G 1/4, support the 15 mm direct acting valve (type UMCSV
More informationVALVES SERIES 70 DISTRIBUTORS
VALVES SERIES 70 This is Metal Work s full range. Available in three sizes: 1/8, 1/4, 3/8, 1/2. Three versions: 3/2; 5/2; 5/3, four different types of actuation (mechanical, manual, pneumatic and electric).
More informationB1 VALVES SERIES 70 DISTRIBUTORS B1.12
VALVES SERIES 70 The Series 70 forms part of Metal Work s full range of traditional valves. They are available in sizes 1/8, 1/4, 3/8 and 1/2, versions 3/2, 5/2, 5/3 and double 3/2, with mechanical, manual,
More information121 1/8 NPT. Line. Manual and mechanical valves size 0,86 in
121 1/8 NPT Manual and mechanical valves size 0,86 in General Features Construction: spool type Body size: 0,86 in Ports: 1/8 NPT Body material: technopolymer Single use: Yes Manifold use: No Available
More information40-501, , ,
-9 Silencer, plastic. -5, -5 Silencer, sintered bronze. - Flow control silencer. -5 Check valves. -5 Hand sliding valves. -5, -5 Quick couplings. -5 Miniature regulator, screw-in type.6-55 Check valves.7-56,
More informationServicio de Att. al Cliente. pivoting. Polígono Industrial O Rebullón s/n Mos - España -
+34 6 211 pivoting P-SERIES Pivot units 20 Polígono Industrial O Rebullón sn. 36416 - Mos - España - rodavigo@rodavigo.com +34 6 211 pivot UnitS INNOVTION DOWN TO THE LST DETIL Robust and reliable pivot
More informationAir treatment filter EZF G 3/8 - G 1/2 - G 1
EZ filter EZF G 3/8 - G 1/2 - G 1 Filters series "EZF" are produced with connections G 3/8, G 1/2 and G 1; they are available with various degrees of filtration and with manual, semiautomatic or automatic
More information10 mm solenoid valves on manifold with multiconnection D-SUB
0 mm solenoid valves on manifold with multiconnection D-SUB Air inlet from both sides Exits with ø4 push-in fittings ø4 Panel mounting possible with two M3 screws on the top side 3/2 solenoid valves Electrical
More information5/2-way monostable/bistable - 5/3 CC, CO, CP With outlets on the body - For individual or manifold assembly Size 10,5 mm
> Series E valves and solenoid valves Series E valves and solenoid valves 5/-way monostable/bistable - 5/3 CC, CO, CP With outlets on the body - For individual or manifold assembly Size 10,5 mm Series
More informationValves and Solenoid valves Series E 2/
CATALOGUE > Release 8.6 > Series E valves and solenoid valves Valves and Solenoid valves Series E 5/-way monostable/bistable - 5/3 CC CO CP With outlets on the body - For individual or manifold assembly
More informationPneumatically actuated valves 3/2 NC become NO when the supply is on connection 3.
> Series 4 valves and solenoid valves Series 4 valves and solenoid valves New models 3/, 5/ and 5/3-way CC, CO Ports: G1/8, G1/4, G1/ Series 4 solenoid valves have been designed in the 3/, 5/, 5/3 versions
More informationC 50 μm filtered air, with or without lubrication spool 10 bar G/18 6,5 G1/4 8,5
CL/CM UNIVERSAL Valves G1/8 - CHARACTERISTICS Ambient temperature Fluid Commutation system Pressure Max Connections Nominal bore (mm) Nominal flow rate (Nl/min) Valve body Seals Spool Electropilot/Coil
More informationSeries 3 valves are equipped with a manual override which allows a stable operation and they can use Series U or G solenoids (22x22).
> Series 3 valves and solenoid valves Valves and Solenoid valves Series 3 x3/, 3/, 5/ and 5/3-way CC CO CP Ports G1/8 and G1/4 Series 3 solenoid valves with G1/8 and G1/4 ports have been designed in the
More informationDirectional Control Valves. G 1 /4, 3/2, 5/2, 3/3 and 5/3 Spool valves
Directional Control Valves G 1 /4, 3/2, 5/2, 3/3 and 5/3 Spool valves Directional control valves G 1 /4 3/2, 5/2, 3/3, 5/3 Spool Valves G 1 /4 Ports This quality and proven range of valves feature a block
More informationPneumatic. PXC Limit Switches
Pneumatic PXC Limit Switches Limit Switches Series PXC High durability Very good repeat accuracy Design for process duty cycle Push-in or threaded connection Versatile and easily maintained Wide range
More informationElectrically operated valves Series M-22, 3/2-, 5/2- and 5/3-way G1/ Nl/min (3.354 Cv)
Electrically operated valves Series M-22, 3/2-, 5/2- and 5/3-way G1/2 3300 Nl/min (3.35 Cv) Order code Series and function M-22-310-HN-12 Standard coils 1) 11 = 12 V DC,,2 W 12 = 2 V DC,,2 W 22 = 2 V AC,
More informationManually actuated valves
Manually actuated valves 3/2-5/2-5/3 spool valves with /8 - /4 - /2" NPT threaded ports, BSP version avaiable on request Installation in any position Comprehensive range of actuations Push/pull and lever
More information121 1/8 NPT Solenoid and pneumatic valves size 0,86 in
121 1/8 NPT Solenoid and pneumatic valves size 0,86 in General Features Construction: spool type Body size: 0,86 in Ports: 1/8 NPT Body material: technopolymer Single use: Yes Manifold use: No Available
More informationLockable isolation 3/2-way valves Series MX 3/
CATALOGUE > Release 8.5 > /2-way isolation valves Series MX Lockable isolation /2-way valves Series MX New MX2 ports: G/8, G1/2, G/4 - MX ports: G/4, G1 Modular Manual, electro-pneumatic, servo-pilot and
More informationwaa and Glacier Side Chain Pewag and Glacier Cross Chain
Chains waa and Glacier Side Chain Pewag Hardened and Non-Hardened Side Chain 1008 7/0 Hardened.312 (5/16") Truck/Equipment 100' 68 lbs 1010 9/0 Hardened.375 (3/8") Heavy Equipment 100' 104 lbs 1012 10/0
More informationMN-06. Standardized valve series 3/2-way acc. to NAMUR, 750 Nl/min (0.762 Cv) Technical data for series. Order code MN HN-142
3/2-way Technical data for series Order code -310-HN-142 Series and function Standard coil 1) (with plug socket 28-ST-01) 141 = 12 V DC, 4.2 W 142 = 24 V DC, 4.2 W 152 = 24 V AC, 7/4 VA 156 = 115 V AC,
More informationScrewed-head cylinders
Screwed-head cylinders Series HB DESCRIPTION Cylinders series HB are manufactured to be fixed on machine edges without the use of mountings. The end cap acts as a mounting device in the versions: hinge-mounted,
More informationTECHNICAL CHARACTERISTICS
Miniature valves COMPA E-F series The importance of electronics in industrial automation challenges the manufacturers of pneumatic equipment to design components that can be interfaced with this automation
More informationSPOOL VALVES. pilot operated single/dual solenoid (mono/bistable function) ISO mm - pad mounting body M12 connection
SPOOL VALVES pilot operated single/dual solenoid (mono/bistable function) ISO 1507-18 mm - pad mounting body M1 connection x/ - 5/ - 5/ Series 50 ISO 1507- (18 mm) FEATURES M1 connection with electrical
More informationPage No Pneumatic Symbols Cylinders & Accessories
Section 15 Pneumatic Cylinders and Valves Page No Pneumatic Symbols 356-357 Cylinders & Accessories 358-364 Slide Units NEW 365 Shock Absorbers NEW 366 Solenoid Valves 367-372 Pneumatically Operated Valves
More information2/ VDMA (ISO ) 5/2-5/3-way CC CO CP. CATALOGUE > Release 8.8 CONTROL > Series 7 valves and solenoid valves GENERAL DATA
CATALOGUE > Release 8.8 > Series 7 valves and solenoid valves Series 7 valves and solenoid valves VDMA 4563 (ISO 15407-1) 5/ - 5/3-way CC CO CP Size 6 mm (VDMA 4563-01) Size 18 mm (VDMA 4563-0) GENERAL
More informationValves and Solenoid valves Series 7
> Valves and Solenoid valves Series 7 Valves and Solenoid valves Series 7 CATALOGUE > Release 8.4 ISO valves, VDMA 4563 standards 5/ 5/3 way CC CO CP Size 6 mm (VDMA 01) Size 18 mm (VDMA 0) GENERAL DATA
More informationMN-06. Standardized valve series 3/2-way acc. to NAMUR, 750 Nl/min (0.762 Cv) Technical data for series. Order code MN HN-142
Standardized valve series 3/2-way acc. to NAMUR, 750 Nl/min (0.762 Cv) Technical data for series Order code -310-HN-142 Series and function Standard coil 1) (with plug socket 28-ST-01) 141 = 12 V DC, 4.2
More informationSOLENOID VALVES AND PNEUMATIC VALVES
9 S E R I E S Electropneumatically and pneumatically operated valves Series 9 Assembly with sub-base (ISO 5599/1 Standards) Sizes 1, and 3 001 The Series 9 electropneumatically or pneumatically operated
More informationINTEGRATED ELEMENTS. 1. FLIP-FLOP VALVES (pneumatic) ORDER CODIFICATION : AZ100354
INTEGRATED ELEMENTS 1. FLIP-FLOP VALVES (pneumatic) It frequently happens that with only one pilot signal available it is necessary to determine any reciprocating movement having two stationary positions.
More informationG1/8-3/2-Way Valves - Series K9
PDE600PNUK 3/-Way Valves - Series K9 G1/8-3/-Way Valves - Series K9 Actuation: indexed spring return indexed, secured in two positons Pushbutton Cam operation Toggle cam operation Plunger operated Cam
More informationElectrically operated valves Series M-07, 3/2-, 5/2- and 5/3-way G1/ and 1580 Nl/min (1.321 and Cv)
Electrically operated valves Series M-07, 3/2-, 5/2- and 5/3-way G1/4 1300 and 1580 Nl/min (1.321 and 1.606 Cv) Order code Series and function M-07-310-HN-442 Standard coil HN at port 2 + 4 HN at port
More informationSeries 77. Miniature 3/2 Valves PUSH BUTTON TOGGLE LEVER SPRING RETURN WITH DETENT ONE WAY ROLLER ROLLER AIR PILOT FINGER BUTTON BALL PLUNGER
Miniature 3/2 Valves TOGGLE LEVER 77.1130 1/8 77.1131 1/8 ROLLER ONE WAY ROLLER - N/O or N/C application - Aluminum alloy 125 PSI -10 C to 60 C (14 F to 140 F) 77.1132 1/8 77.1133 1/8 BALL PLUNGER AIR
More informationSeries RE-10. Valve terminals > Technical details. Order code RE-10/**-***-*** Temperature range Medium +5 C C
Technical details Temperature range Medium + C... +0 C Filtered, oil-free and dried compressed air according to ISO 8-:00, Class ::, instrument air, free of aggressive additives. Alternatively the pressure
More informationZCK-Y39 ZCK-Y49 ZCK-Y33 ZCK-Y34 ZCK-Y31 ZCK-D109 ZCK-D41 ZCK-D06 ZCK-M2H29 ZCK-M2H29
ZCK-Y39 ZCK-Y43 ZCK-Y49 ZCK-Y41 ZCK-D239 ZCK-D23 ZCK-D59 ZCK-Y55 ZCK-Y54 ZCK-Y59 ZCK-D219 ZCK-D21 ZCK-D81 ZCK-D91 ZCK-Y91 ZCK-Y31 ZCK-Y33 ZCK-Y34 ZCK-Y81 ZCK-D029 ZCK-D02 ZCK-D05 ZCK-D109 ZCK-D41 ZCK-D06
More informationCOILS, CONNECTORS, SOLENOID VALVES
COILS, CONNECTORS, SOLENOID VALVES 117 10 mm solenoids Solenoid valve 10 mm 00.441.0 Tension 24V DC ±10% Temperature range -5 C...+60 C (23 F... 140 F) Power 0.5... 1 W Operating pressure 0... 7 bar (0...
More informationpneuforce.com NMSV MANUAL VALVES SPECIFICATIONS Actuator Type
MSV MAUAL VALVES pneuforce.com R MSV 86 32 1 R Series Type Valve Function Port Size Actuator Type MSV PT 86 32 3-Way 1 1/8 blank Plunger MSV BSPP 98 52 5-Way 2 1/4 R Roller TB Selector Knob LB Extended
More informationGENERAL PURPOSE. 3 Port 1/8 Pilot Valves Two Hands Safety Valve BC 1/4 Body Ported Valves : Mechanically Operated...
GENERAL PURPOSE 3 Port 1/8 Pilot Valves.........................19 Two Hands Safety Valve....................... 199 BC 1/ Body Ported Valves :.................... 00 Mechanically Operated.................
More information5 Port Mechanical Valve/Metal Seal. Specifications. 5 to 60 C (No freezing) Effective area (Nl/min) Basic Roller lever. Mechanical operation
5 Port Mechanical Valve/Metal Seal Series VZM400 Compact design, Large flow capacity High cycle rate, Long life/300c.p.m. Piping possible to any EXH port. Proper countermeasures can be taken for applications
More information5/2-way valve, Series ST Qn= 280 l/min pipe connection compressed air connection output: G 1/8 with spring return
00108065 Version Spool valve not lockable Sealing principle metal/metal sealing Working pressure min./max. -0.95 bar / 10 bar Ambient temperature min./max. -15 C / +80 C Medium temperature min./max. -15
More informationNugget 40, V08 series
Nugget 0, V0 series Integrally ported 5/ and 5/3 Spool valves Solenoid actuated and pilot operated Ø, Ø mm or High flow from mm body width Wide range of voltages available Low profile fixed length manifolds
More informationVannes à commande pneumatique pneumatically piloted valves
Vannes à commande pneumatique Distributeurs 3/2-5/2-5/3 avec raccordements G1/8 -G1/4 -G3/8 -G1/2 3/2-5/2-5/3 spool valves with G1/8 -G1/4 -G3/8 -G1/2 threaded ports Montage en ligne sur embases multiples
More informationMATERIALS PISTON TYPE. Non-magnetic
Cylinders to AFNOR NF E49-00 seriescx DESCRIPTION Cylinders series CX comply with AFNOR NF E49-00 (ex CNOMO) standard and so they result interchangeable. Cylinders series CX with magnetic piston type can
More informationChapter 6 Pneumatic Logic Sensors and Actuators
Chapter 6: Penumatic logic sensors and actuators -IE337 Chapter 6 Pneumatic Logic Sensors and Actuators 1 Introduction to Pneumatic Why pneumatic? Pneumatic control system is frequently used in building
More informationElectrically operated valves Series MF-04 for manifold mounting, 5/2- and 5/3-way G1/8 360 Nl/min (0.366 Cv)
Series MF-04 for manifold mounting, 5/2- and 5/3-way G1/8 360 Nl/min (0.366 Cv) Order code MF-04-510-HN-442 Series and function (plug pins on top, see pictures) 441 = 12 V DC without plug socket 442 =
More informationSeries VM. Mechanical Valve. VM1000 Side piping Bottom piping. VM100 Side piping Bottom piping VM200. Model Dimensions (mm) 2-38.
Mechanical Valve Series VM Model Dimensions (mm) VM1000 Side piping Bottom piping 11 X 36 X 16 11 X 28 X 25 VM100 Side piping Bottom piping 17 X 44 X 25 17 X 44 X 30 VM200 25 X 40 X 52 Basic Roller Lever
More informationSeries RE-46. Valve terminals > Technical details. Order code RE-46/**-*-***-*** Temperature range Medium -10 C C
Technical details Temperature range Medium -0 C... +50 C Filtered, oil-free and dried compressed air according to ISO 857-:00, Class 7::, instrument air, free of aggressive additives. Alternatively the
More informationSeries PD directly operated solenoid valves
> Series PD solenoid valves CATALOGUE > Release 8.8 Series PD directly operated solenoid valves /-way - Normally Closed (NC) Please note that all Series PD solenoid valves are supplied with direct current
More informationPneumatic Pilot - Operated Valves Series 3 and 4
Pneumatic Pilot - Operated Valves Series 3 and 4 Series 3: 1/8 NPTF, 3/2-way and 5/2-way Series 4: 1/8, 1/4 NPTF 3/2, 5/2 and 5/3-way The pneumatically operated, 3/2-way, 5/2-way and 5/3-way, Series 3
More informationSpecifications Fluid. Basic Roller lever. Mechanical operation. One way roller lever. Roller plunger. Push button (Flush) Manual operation
5 Port Mechanical Valve Metal Seal Series VZM400 Compact design, large flow capacity 9.9 mm 2 High cycle rate, long life/300 c.p.m. or less Piping possible to any EXH port. Proper countermeasures can be
More informationQuarter Turn Ball Valve Systems 2 Pcs Body Design with Threaded Ends
2 Pcs Body Design with Threaded Ends Features Modular Program ball valve system igh quality investment cast stainless steel body and ends 2 pcs body full bore design, 2 way Blow out proof stem Disc spring
More informationBall valves and shut off valves
Shut off valves HE Hand slide valves W Ball valves QH, manually actuated Ball valves VAPB, mechanically actuated Ball valves VAPB CR, mechanically actuated, corrosion resistant 2003/10 Subject to change
More informationElectrically operated spool valve. The manual override is detent and is operated by screw driver.
Valves > electrically operated valves > Series M-07 Technical details Connection G1/ Nominal size Temperature range Medium Series M-07 page Materials 9 mm -10 C... +70 C Filtered, oil-free and dried compressed
More informationSeries MI-01, MI-02, MI-03
Valves > standardized valves > electrically operated > Series MI-01, MI-02, MI-03 ISO 99/1, Size 1 to 3 Technical details Series Connection MI-01, MI-02, MI-03 ISO 99/1 Nominal size Temperature range Medium
More informationSpecifications Fluid. 5 to 60 C (No freezing) Effective area. Basic Roller lever. Mechanical operation. One way roller lever.
Rubber Seal Compact design, large flow capacity 18 mm 2 High cycle rate, long life/300 c.p.m. or less Piping possible to any EXH port. Proper countermeasures can be taken for applications in which the
More informationSTC Solenoid Valve List Price
STC Solenoid Valve List Price To Order, Please Specify: 1. Model No. 2. Voltage 3. Electrical Entry Options Voltage & Electrical Connection Options B. Electrical Connection 2V025-1/8 1/8 2/2/2/1 2V025-1/4
More informationstore.norgren.com Rapid delivery order today Models 3/2 Mechanical Valves Accessories
In-line Super X Manually & mechanically actuated spool valve /, 5/ and 5/, G/8, G/4 Wide range of operators Suitable for multi-directional flow and dual supply applications High flow capacity Lightweight
More informationBM-01. Electrically operated valves 3/2-way G 1/8, Nl/min ( Cv) Technical data for series. Order code BM HNR-162
Electrically operated valves 3/2-way G 1/8, 600 660 Nl/min (0.610 0.671 Cv) Technical data for series BM-01 Order code BM-01-310-HNR-162 Series and function BM = Standard Manual override HNT = non-detented
More informationVALVES SERIES 70, SOLENOID/PNEUMATIC
VALVES SERIES 7, SOLENOID/PNEUMATIC TECHNICAL DATA Pressure range: monostable bistable asserved Minimum actuation pressure Operating temperature range Nominal diameter Conductance C Critical ratio b Flow
More informationAccessories. Unidirectional Flow Control DRV
Unidirectional Flow Control DRV Technical data - Body: Aluminium - Seals: NBR - Springs: Stainless steel - Internal parts: Brass OT58 - Operating pressure: 2 to 10 bar (DRV75B, DRV100B: vacuum 0.2 to 10
More informationElectrically operated valves Series KM-09, 5/2- and 5/3-way G1/8 680 to 950 Nl/min (0.691 to Cv)
Electrically operated valves Series KM-09, 5/2- and 5/3-way G1/8 680 to 950 Nl/min (0.691 to 0.966 Cv) Order code Series and function KM-09-510-HN-442 Standard coils HN at ports 2 + 4 HN at ports 1, 3
More informationSeries
PNEUMATI valves Series 79-8 - 84-85 - 87 Steelspool Valves Solenoid Valves Mechanical Valves Pneumatic Valves oils & Plug-in sockets VM/EN 4 The components illustrated and described in the present calalogue
More informationBM-02. Electrically operated valves 3/2-way G 1/4, Nl/min ( Cv) Technical data for series. Order code BM HNR-162
Electrically operated valves 3/2-way G 1/4, 920 1090 Nl/min (0.935 1.001 Cv) Technical data for series BM-02 Order code BM-02-310-HNR-162 Series and function BM = Standard Manual override HNT = non-detented
More information3/2-5/2 ports / positions
Series SOLENOID SPOOL VALVES G / THREADED PORTS with CNOMO pilots /-/ ports / positions SPECIFICATIONS FLUID : or neutral gas, filtered, lubricated or not PORTS : G/ PRESSURE : to 0 bar TEMPERATURE RANGE
More informationSeries PD directly operated solenoid valves
> Series PD solenoid valves CATALOGUE > Release 8.7 Series PD directly operated solenoid valves New /-way Normally Closed (NC) Note: all Series PD /-way solenoid valves are basically in DC. To operate
More informationshort name: 3WL.IG* technical product sheet created :57 1/6 3-way ball valve F/F PN 63 with pneumatic actuator hard anodized aluminum
with pneumatic actuator hard anodized aluminum technical product sheet short name: 3WL.IG* 3-way ball valve F/F PN 63 E-Box MV Port Modell G Kugel Bauart RE06 RE06 1 1 1/ 1/ 3/" 1 1/ 1 1/ 3/" 1 1/ 1 1/
More informationType TW17 FUTURE. TECHNOLOGY. TODAY. WEH Connector for pressure and function testing. DatA Sheet. on components with internal thread
Dat Sheet D-2011/09/00027-2-3 Date: 01/2013 Type TW17 WEH Connector for pressure and function testing on components with internal thread FUTURE. TECHNOLOGY. TODY. General Description Features Connection
More informationHYDRAULIC PILOT CONTROL UNIT OF SANDWICH PLATE DESIGN
01 /10 2.2 HYDRULIC PILOT CONTROL UNIT OF SNDWICH PLTE DESIGN Type: H*-2TH6 Benefits: Progressive, sensitive control Precise and play-free control characteristics Low actuation force at the lever Rust-free
More informationControl Valves & Valve Accessories
Control Valves & Valve Accessories PNEUMADYNE, INC. Catalog 400 Phone 76-559-077 Fax 76-559-0547 Stainless Steel 0- Fully Ported valve with M5 threads available- contact factory Viton is a registered trademark
More informationCABINET MOUNTING. 501 series
CABINET MOUNTING 50 series FEATURES The new 50 range has an adaptation plate for direct mounting on a cabinet side or bottom walls. These adaptation plates are available in aluminium or stainless steel
More informationPRECISION SWITCHES CONTENTS
PRECISION SWITCHES CONTENTS Limit Switches to EN50041 LIMIT SWITCHES The TEKNIC Limit Switch Precision, Reliability and Versatility. The TEKNIC Limit switch is a versatile unit, according to the EUROPEAN
More informationMAGNETIC SENSORS FOR CYLINDERS
MAGNETIC SENSORS FOR CYLINDERS Magnetic sensors REED type with cable Magnetic sensors REED type for connector Magnetic sensors HALL effect with cable Magnetic sensors HALL effect for connector Miniaturized
More informationKuhnke Technical Data. Contact Details
Kuhnke Technical Data The following page(s) are extracted from multi-page Kuhnke product catalogues or CDROMs and any page number shown is relevant to the original document. The PDF sheets here may have
More informationElectrically operated valves Series BM-01, 3/2-way and 2 x 3/2-way G1/8 550 to 660 Nl/min (0.559 to Cv)
Electrically operated valves Series BM-01, 3/2-way and 2 x 3/2-way G1/8 550 to 660 Nl/min (0.559 to 0.671 Cv) Order code BM-01-310-HNR-462 Series and function BM = Standard Manual override HNT = non-detented
More informationVENTTIILIT MINIVALVES, MECHANICALLY AND HAND OPERATED SERIES VME. TECHNICAL DATA Valve fitting port Fluid Type Versions Operators: 0.
venttiilit MINIVALVES, MECHANICALLY AND HAND OPERATED SERIES VME Valve fitting port Fluid Type Versions Operators: Operating pressure C / Flow rate at 6 Bar P 0.5 Bar Flow rate at 6 Bar P 1 Bar N Installation
More informationPULL HANDLES THERMOPLASTIC CAST IRON ALUMINUM STAINLESS STEEL BIG HAND STYLE P U L L H A N D L E S
473 THERMOPLASTIC CAST IRON P U L L H A N D L E S ALUMINUM PULL HANDLES Manual Clamps 9 TriMax Vises 81 Pneumatic Workholding 121 Supports, Stops & Set Up Accessories 137 Precision Tooling Plates, Blocks
More informationSuper X Inline 3/2 and 5/2 Spool valves, solenoid and pilot actuated
> > Port size: G/8 & G/4 > > Low and high power solenoid coil options > > End, side or face mounting solenoids > > Light weight corrosion resistant materials > > Option for manual override acting directly
More informationVAL-146. Manually & mechanically actuated spool valve In-line 3/2, 5/2 & 5/3, 1/8" & 1/4" NPT. 1/8" NPT 5/2 Mechanical Valves
3/, 5/ & 5/3, /8" & /4" NPT PRODUCTS FOR SAFE SYSTEMS* Wide range of operators Suitable for multi-directional flow and dual supply applications High flow capacity Lightweight corrosion resistant materials
More informationVersa exercises diligence to assure that information contained in this catalog is correct, but does not accept responsibility for any errors or omissi
SERIES B VALVES AIR VALVES FOR INDUSTRY SINCE 1949 ISO 9001 Two-Way Types for bleeding pilots of larger valves, for bleeding cylinders or small pressure systems, operating air tools or motors, opening
More informationvalvole VDMA 18 mm azionamento pneumatico
valvole VDMA 18 mm azionamento pneumatico pneumatically piloted valves - VDMA 18 mm Valvole a spola 5/-5/3 5/-5/3 spool valves A norma VDMA 4563 - taglia 0 (18 mm) Compliant to norm VDMA 4563 - size 0
More informationSub-Base Mounted Valves to ISO 5599/2 Fielbus Electronics - 239
Valves Sub-Base Mounted Valves to ISO 5599/2 Fielbus Electronics - 239 General Information ISO 1, ISO 2 and ISO 3 valve series incorporate the famous Numatics lapped spool and sleeve for ultimate service
More informationCABINET MOUNTING. 501 series. Aluminium or stainless steel AISI 316L
CABINET MOUNTING 501 series FEATURES The 501 range has an adaptation plate for direct mounting on a cabinet side or bottom walls. These adaptation plates are available in aluminium or stainless steel AISI
More informationTie rods cylinders to ISO standard
Tie rods cylinders to ISO 5552 standard seriescpui DESCRIPTION Cylinders series CPUI comply with ISO 5552 standard, being in this way completely interchangeable with the well-known cylinders to ISO 643
More informationGRIPPERS SERIES P3 - P12 ACTUATORS
GRIPPERS SERIES P3 - P12 1 GRIPPER WITH TWO PARALLEL JAWS, SERIES P3 GRIPPER WITH TWO PARALLEL JAWS, SERIES P3 Parallel double-acting two-jaw gripper, with either internal or external clamping. Body made
More information4-way pneumatic valves for pipe connection/sub-base mounting
4-way pneumatic valves for pipe connection/sub-base mounting Port size G Orifice () Flow factors (L/min Qn Admissible differential pressure bar Min Max Fluid temp. C Gas Seat disc Reference numbers Power
More informationFront panel valves SV
Front panel valves SV Key features T N H Q P PR PRS SVS-3-1/8 SVOS-3-1/8 SV-3-M5 SV-5-M5-B SV/O-3-PK-3X2 Actuator attachments Pushbutton T Switch N, H, Q Mushroom pushbutton/mushroom pushbutton with detent
More informationwinner pro winner Grade 100 product catalog Grade 120 and more Industrial 2014
product catalog Industrial 204 winner pro Grade 20 winner Grade 00 and more Polígono Indutrial O Rebullón s/n. 3646 - Mos - España - rodavigo@rodavigo.com Group History At the core of chain innovation
More informationPneumatic Actuators Quarter Turn Rack & Pinion Double Acting and Spring Return
Pneumatic Actuators Quarter Turn Rack & Pinion Double Acting and Spring Return SERIES Features Rack and pinion quarter turn (90 ) rotation Double acting and spring return models Prelubricated and tested
More informationADVANCED CUSTOMIZED ELECTRO PNEUMATIC TRAINER (PRODUCT CODE: SAP 20B)
The Advanced Customized Electro Pneumatic Trainer (SAP 20B) is capable of being used to demonstrate the design, construction and application of electro-pneumatic components and circuits. Objectives:- The
More informationSuper Precision Bearings and Bearing Products
Super Precision Bearings and Bearing Products Timken Super Precision (MPB) ISO 9001 Registered AS9000 Certified D1-9000 AQS Certified Polígono Indutrial O Rebullón s/n. 36416 - Mos - España - rodavigo@rodavigo.com
More information5/2 and 5/3 Valves Solenoid and Pilot Actuated Sub-base Mounted ISO #1, #2, #3, #4 Steel reinforced main seals
5/2 and 5/3 Valves Solenoid and Pilot Actuated Sub-base Mounted ISO 5599- #, #2, #3, #4 Steel reinforced main seals 6 bar and 0 bar CNOMO solenoid pilots with locking or non-locking manual override Low
More information