High tensile strength. Vibration dampening. Noise dampening. Lightweight
|
|
|
- Trevor Carter
- 6 years ago
- Views:
Transcription
1 High tensile strength Vibration dampening Noise dampening Can be used in combination with rod end bearings from the dimensional series E Lightweight 20.1
2 igubal clevis joints are all made of igumid G according to DIN 71752, which can be used in combination with the rod end bearings of the dimensional series E. Available components are clevis joint, clevis pin and clip or as an alternative, spring loaded pin. The most significant Properties l lightweight l universal corrosion resistance l high tensile strength l can be used in combination with rod end bearings of the dimensional series E l vibration dampening l noise dampening l available in left and right hand threads Part Selections All of the components listed below are also available individually. Clevis joint with clevis pin and circlip igus GmbH Cologne Clevis joint with spring loaded pin Internet: info@igus.de 20.2 GER(L)MK- GER(L)MF- Clevis joint with clevis pin and circlip and rod end bearing GER(L)MKE- Clevis joint with spring loaded pin and rod end bearing GER(L)MFE-
3 Structure for Part Numbers for s The part numbers of igubal clevis joints are designed according to the following system: G E R M KE - 12 F Model G = Clevis Joint Dimensional Series E = dimensional series E Thread design L = left hand R = right hand Measuring system M = metric Options None Standard K = with clevis pin and circlip KE = with clevis pin, clip, and rod end bearing F = with spring loaded pin FE = with spring loaded pin and rod end bearing Nominal dimension of inside diameter Design None standard thread F = Fine thread The example shows a complete clevis joint assembly of the dimensional series E with a female right hand thread in metric dimensions. The inner diameter of the spherical ball is 12. The thread bore has a metric fine threading (M12 x 1.25). 20.3
4 , GE..M GE..M igubal - Clevis Joint: l lightweight l universal corrosion resistance l high tensile strength l Can be used in combination with rod end bearings of the dimensional series E l vibration dampening l noise dampening l available in left and right hand thread igus GmbH Cologne Load Data igubal - Clevis Joints dimensional series E Clevis Joint (GERM / GELM) Clevis Joint with clevis pin and circlip (GERMK / GELMK) Right hand Max. Static axial Right hand Max. Static Axial Thread Tensile Strength GERM Thread Tensile Strength GERMK Short term Long term Short term Long term [N] [N] [N] [N] Internet: info@igus.de GERM-05 DIN M GERMK-05 DIN M GERM-05 DIN M GERMK-05 DIN M GERM GERMK GERM GERMK GERM GERMK GERM GERMK GERM-10 F GERMK-10 F GERM GERMK GERM-12 F GERMK-12 F GERM GERMK GERM GERMK GERM GERMK GERM-16 F GERMK-16 F
5 , GE..M d1 l 1 l 2 Chamfer 30º l 3 d3 f b1 Chamfered end 90º g d2 GE..M a 1 a 2 Dimensions [] igubal - Clevis Joints dimensional series E - Clevis Joints only (GERM / GELM), without clevis pin and circlip Right hand d1 g a1 a2 b1 d2 d3 f I1 I2 I3 Thread H9 h B13 Thread tolerance 6H GERM-05 DIN M M GERM-05 DIN M M GERM M GERM M GERM M GERM M GERM-10 F M10 x GERM M GERM-12 F M12 x GERM M GERM M GERM M GERM-16 F M16 x
6 , GE..MKE igus GmbH Cologne GE..MKE Internet: Load Data igubal - Clevis Joints dimensional series E - complete joint assembly GERMKE/GELMKE, consisting of clevis joint GERM/GELM, clevis, pin, circlip, and rod end bearing of the series EBRM/EBLM Right hand Left hand Max. Static axial Max. Static Axial Thread Thread Tensile Strength Tensile Strength GERM Short term GERM Long term [N] [N] GERMKE-05 M5 GELMKE-05 M GERMKE-06 GELMKE GERMKE-08 GELMKE GERMKE-10 GELMKE GERMKE-10 F GELMKE-10 F GERMKE-12 GELMKE GERMKE-12 F GELMKE-12 F
7 igubal Spring Loaded Pins, GEFM igubal - Spring Loaded Pins l single piece design l easy to install l maintenance free l can be used in combination with rod end bearings of the dimensional series E l high stability GEFM c l1 l2 b a d1 l3 d2 Dimensions [] igubal - Spring Loaded Pins Part Number d1 d2 a b c l1 l2 l3 h11 ±0.5 GEFM GEFM GEFM GEFM GEFM GEFM GEFM
igubal Pivoting Bearings igubal Pivoting Bearings Phone Fax Easy to fit Extremely cost-effective
igubal igubal Easy to fit Extremely cost-effective Resistant to chemicals Light weight High strength 55.1 igubal Technical data igubal igus GmbH 51147 Cologne Internet www.igus.de E-mail info@igus.de The
igubal Pressfit Spherical Bearings Easy to fit Extremely cost-effective Chemical-resistant Light weight High strength
igubal Pressfit Spherical earings Easy to fit Extremely cost-effective Chemical-resistant Light weight High strength 629 igubal Pressfit Spherical earings The use of pivoting s is usually associated with
igubal Pressfit Spherical Bearings Easy to fit Extremely cost-effective Chemical-resistant Light weight High strength
igubal Pressfit Spherical earings Easy to fit Extremely cost-effective Chemical-resistant Light weight High strength 791 igubal Pressfit Spherical earings The use of pivoting s is usually associated with
DryLin R Linear Plain Bearings, Fast and Quiet
+90º 40º +250º 100º Linear Plain Bearings, Fast and Quiet linear plain bearings, made from solid polymers, are dimensionally equivalent to standard ball bearings. They are made entirely of wear resistant
DryLin R - Linear Plain Bearings - Fast and Quiet. Linear Bearings. DryLin R. Fax Phone Corrosion resistant
Linear Bearings - Linear Plain Bearings - Fast and Quiet Corrosion resistant Wear resistant Resistant to contaminants Low coefficient of friction Extremely quiet operation Lightweight 29.1 DryLin Linear
DryLin R Linear Plain Bearings, Fast and Quiet
+90º 40º +250º 100º Linear Plain Bearings, Fast and Quiet linear plain bearings, made from solid polymers, are dimensionally equivalent to standard ball bearings. They are made entirely of wear resistant
DryLin R Linear Plain Bearings, Fast and Quiet
+90º 40º +250º 100º Linear Plain Bearings, Fast and Quiet linear plain bearings, made from solid polymers, are dimensionally equivalent to standard ball bearings. They are made entirely of wear resistant
DryLin R Linear Plain Bearings, Fast and Quiet
+90º 40º +250º 100º Linear Plain Bearings, Fast and Quiet linear plain bearings, made from solid polymers, are dimensionally equivalent to standard ball bearings. They are made entirely of wear resistant
Quick, zipper-like installation
07 Product Range: Series 07 "Zipper" 10,3 igus Energy Chain Systems Price Index 8 Widths 3 Bending Radii Product Range: Inner Widths (Bi) in mm: 6, 10, 16, 20, 30, 40, 50, 64 Bending Radii (R) in mm: 018,
igubal Pressfit Spherical Bearings Easy to fit Extremely cost-effective Chemical resistant Lightweight High strength
igubal Pressfit Spherical earings Easy to fit Extremely cost-effective Chemical resistant Lightweight High strength 835 igubal igubal Pressfit Spherical earings Ease of installation makes diverse applications
xirodur B180 Axial Ball Bearings Product Range
axial ball bearing xirodur B180 xial Ball Bearings Product Range Order key BB-510-B180-ES stainless steel balls glass balls GL = glass ES = stainless steel Material xirodur B180 Dimensions acc. to DIN
Self-aligning rod ends-, pillow block- and flange bearings....plastics
3. igubal.... Self-aligning rod ends-, pillow block- and flange bearings.....plastics Application Examples: Exciting applications can be viewed online at www.igus.co.uk/igubal-applications LIMELIGHT V
Contents. iglidur Plain Bearings Page iglidur Sleeve Bearing Type S Page 374. iglidur Flange Bearing Type F Page 374
BEARINGS Innovations comprising high performance plastics igus polymer plain bearings constitute the step from a simple plastic bushing to a tested, predictable and available machine element. Our research
iglidur G The General Purpose Bearing: most popular iglidur material worldwide
Standards Wide Range from Stock polymer bearings G The General Purpose Bearing: most popular material worldwide from page 51 J The Fast and Slow Motion Specialist: used in long-life applications, also
Low friction, low wear: The Fast and Slow Motion Specialist iglidur J
Low friction, low wear: The Fast and Slow Motion Specialist iglidur Over 250 sizes available from stock Low wear against different shaft materials Low coefficients of friction running dry Vibration dampening
easy chain Series E26 Z26
easy chain Series 36,5 36,5 Price index IPA Qualification Certificate: Air Cleanless Class ISO Class 2 (at v = 1 m/s) upon request UL94-V2 classifications Torsional motion possible Special equipment: Electrically
easy chain Series E200 Z200
easy chain Series Price index IPA Qualification Certificate: Air Cleanless Class ISO Class 2 (at v = 1 m/s) upon request UL94-V2 classifications Torsional motion possible Special equipment: Electrically
Flexible Linear Guide System
Flexible Linear Guide System Easy installation Lubrication-free Different carriage lengths available Different rail widths available Low installation height Corrosion resistant 39.1 Flexible Linear Guide
Deep-Groove Ball Bearings, Axial, Multi-Axis, Shields and More... ..plastics
4. xiros........... Deep-Groove Ball Bearings, Axial, Multi-Axis, Shields and More.....plastics xiros xiros Application Examples Exciting applications can be viewed online at www.igus.eu/xiros-applications
drylin R Round Shaft Guide Systems
Round Shaft Guide Systems Lubrication-free Corrosion-resistant Wear-resistant Insensitive to dirt Low friction Extremely quiet operation Low weight 869 Round Shaft Guide Systems linear plain bearings are
igus- Harnessing Save time and costs with customized assembled systems Predictable lifetime with the use of the maintenance free iglidur bearings
Predictable lifetime with the use of the maintenance free iglidur bearings Other application examples with iglidur bearings: Filling machine, inspection units, labelling machine, bottle cleaner, stretch
E2/
1400 E2/000 1400 21 21 Price index IPA Qualification Certificate Air Cleanless Class ISO Class 3 (at v = 2 m/s) upon request ESD classification: Electrically conductive ESD/ATEX version upon request UL94
igubal Spherical Balls Self-lubricating, maintenance-free Corrosion-resistant High compressive strength High elasticity Lightweight
igubal Spherical alls Self-lubricating, maintenance-free Corrosion-resistant High compressive strength High elasticity Lightweight 857 igubal igubal Spherical alls Every iglide material has its own special
igubal Pillow Block Lifetime calculation, configuration and more igubal pillow block
igubal Pillow Block Maintenance-free, dry running High tensile strength High endurance strength Can be used in cobination with E series rod ends Lightweight 801 igubal igubal Pillow Block The igubal bearings
Low wear on all shafts: The Marathon Runner iglidur W300
iglidur Low wear on all shafts: The Marathon Runner iglidur Over 400 sizes available from stock For especially long service life Low coefficient of friction Extremely high wear resistance Also suitable
E2 e-tubes. Protection against dirt and debris 6.0
E2 e-tubes Protection against dirt and debris 6.0 6.1 E2 e-tubes - protection in environments with dirt and debris E2 Series R100 and Series R Since igus introduced the first openable e-tubes in the mid-1980`s,
drylin shafts drylin Shafts
Shafts 7 shaft materials to choose All also in supported versions Aluminium for low weight Stainless steel for high corrosion resistance Special machining Available from stock Diameters 6 50 mm 845 Shafts
E2/000 Series
E2/000 Series 35 35 Price index IPA Qualification Certificate Air Cleanless Class ISO Class 3 (at v = 2 m/s) upon request ESD classification: Electrically conductive ESD/ATEX version upon request UL94
iglidur G The General Purpose Bearing
iglidur The eneral Purpose Bearing Most popular iglidur material worldwide. iglidur bearings cover an extremely wide range of different requirements they are truly all round. Typical applications cover
02A)-D-EU-IT-TRIFLEX SOLO- G :25 Uhr Seite 30 for 3D-applications easy triflex 2.30
for 3D-applications easy triflex 2.30 2.31 easy triflex - e-chain for 3D-applications The triflex Series was developed to realize safe energy supply in the case of multi-dimensional movements. In doing
Reduce cost... improve technology with motion plastics from... -chainsystems
Reduce cost...... improve technology with motion plastics from.................. -chainsystems... hainflex cables... ry-tech bearings... lastics for longer life e-chainsystems... Moving energy made easy
iglidur J The Fast and Slow Motion Specialist
iglidur The Fast and Slow Motion Specialist Used in long-life applications, also with soft shafts. The iglidur plain bearings are designed for the lowest coefficients of friction while running dry and
Rod ends, series K (wide version), internal and external thread. Rod ends, series E (slim version), internal and external thread
Ro Ens an Spherical earings Overview Ro ens, series K (wie version), internal an external threa Page Maintenance free, plastic Ø 5-20mm... Lubricateable (S), steel Ø 2-40mm... Maintenance free (T), steel
E2 mini Series 14 Introduction
E2 mini Series Introduction 20 Mounting bracket with strain relief option Snap-open along inner radius When to use the Series E2 mini: If an e-chain with an inner height of 20 mm and small bending radii
drylin TR Lead Screw Drives
drylin TR drylin TR Lead Screw Drives Maintenance free, dry running, low noise Insensitivity to dirt Corrosion-free Trapezoidal and high helix thread Excellent emergency running properties Anti-Backlash
drylin linear technology drylin shafts
linear technology ard anodised aluminium for optimum running performances Stainless steel for high corrosion resistance ardened steel and stainless steel Carbon fibre Round with and without support Advantages
Series 09 Introduction
09 zipper e-chains Series 09 Introduction Mounting bracket with strain relief option e-chain zip-open along outer radius Lightweight and stable For high accelerations Small pitch for low-noise, smooth
Increased security with the double flange design. Good wear resistance. Maintenance-free and predictable lifetime. Material: iglidur M250
Eay to fit Increaed ecurity with the double flange deign Good wear reitance Maintenance-free and predictable lifetime Material: iglidur M250 Special dimenion are poible 31.3 iglidur Clip Bearing 1 tyle
SPH Series GAM CAN, JUST ASK!
SPH Series GAM CAN, JUST ASK! - Highest Precision Class The SPH is GAM s latest solution for today s demanding motion control challenges. Available in six frame sizes and nominal torque ratings ranging
Piston rod attachments
Piston rod attachments q/w Worldwide: Superb: Easy: Festo core product range Covers 80% of your automation tasks Always in stock Festo quality at an attractive price Reduces procurement and storing complexity
Series 17 Introduction
zipper e-chains Series Introduction 3 Mounting bracket with strain relief option e-chain zip-open along outer radius Fast opening, large inner height When to use Series E mini: If an e-chain with an inner
Polymer ball bearings....plastics
5. xiros... Polymer ball bearings.....plastics xiros ball bearings Product overview With glass or xiros radial deep-groove ball bearings Standard material xirodur B180 Standard P cage FD compliant PE cage
02)-D-EU-TWISTER-KOMPLETT- G :04 Uhr Seite
2.56 New generation: robust, low-noise, for high loads twisterchain new 2.57 NEW in this catalog New generation - twisterchain new: robust, low-noise, for high loads Higher loads and smoother running igus
E2 mini Series 10 Introduction
E2 mini Series Introduction 18 Stable and cost-effective Mounting bracket with strain relief option One-piece design, non snap-open Lightweight and stable Large pin for high stability When to use the Series
GROUPCODE NEN : ANSI : STEEL BS : STEEL
RETAINING RINGS FOR BORES - NORMAL TYPE - ➁ DIN : 4 8 8 9 10 11 1 13 14 15 s 0,8 0,8 1 1 1 1 1 1 ring d3 8, 9,8 10,8 11,8 13 14,1 15,1 16, d4 3 3, 3,3 4,1 4,9 5,4 6,, d 8,4 9,4 10,4 11,4 1,5 13,6 14,6
antriebstechnik ELA Electromechanical Linear Actuator
D antriebstechnik ELA Electromechanical Linear Actuator Electromechanical Linear Actuators ELA Electromechanical Linear Actuators (ELA) consist of trapezoidal or ball screws driven by an electric motor
*内輪/B126-B128/E_*内輪/B126-B128/E 11/05/25 10:07 ページ 127 Inner Rings
Inner Rings Inner Rings Inner Rings Inner Rings Many of the neele roller bearings use a shaft as the irect raceway surface without using inner ring. However, it is recommene to use any of the inner rings
New! iglidur. igubal. xiros. drylin. drylin. Service. Additional iglidur products
New! New! New! New! New! New! Overview with all new products, which are in this catalog for first time. With page reference to detailled pages with technical data and more. page 16 iglidur Polymer Plain
Other designs: clip and slewing ring bearings, bar stock and much more....plastics
2. iglidur......... Other designs: clip and slewing ring bearings, bar stock and much more...plastics other designs Other designs Product Overview other designs Guiding shafts through sheet metal Clip
triflex R Series TRE Easy to fill
10-43,3 triflex R Series Easy to fill - "Easy" Design - simply press cables in High tensile strength thanks to special ball-and-socket principle Able to move multi-dimensionally - Twist up to approx. ±
Thomson NEFF Rolled Ball Screws Metric Series
Screws, Ball Screws and Ball Splines Thomson NEFF Rolled Ball Screws Metric Series NEFF Rolled Ball Screw Assemblies are available in a wide range of diameters, leads and nut styles all designed to provide
Polymer ball bearings....plastics
xiros... Polymer ball bearings.....plastics xiros polymer ball bearings Application examples Other exciting applications www.igus.eu/xiros-applications LABELLING MACHINE Depending on the size of the system,
PLUMMER BLOCK HOUSINGS
9. BASIC STRUCTURE OF FBJ Bearing Unit / Insert PLUMMER BLOCK HOUSINGS STRUCTURE OF PLUMMER BLOCK HOUSINGS 9 0. MATERIALS AND MACHINING TOLERANCES Plummer Block Housings are cast and produced in accordance
Tel +44 (0) Fax +44 (0)
Tel +44 (0)1235 815816 Fax +44 (0)1235 811234 E-mail oilite@bowman.co.uk Contents Page Company Profile 1-2 ISO Certificate 2 Product Pictures 3 Wrapped Bearings Technical Information 4 Wrapped Bearings
Piston rod attachments
Piston rod attachments q/w Worldwide: Superb: Easy: Festo core product range Covers 80% of your automation tasks Always in stock Festo quality at an attractive price Reduces procurement and storing complexity
Tapered Roller Bearings. Reliable energy efficient suitable for high loads
Tapered Roller Bearings Reliable energy efficient suitable for high loads Tapered roller bearings a premium product from FAG Tapered roller bearings are characterized by high radial and axial load carrying
Pneumatic Angle Grinder also for Underwater Use Type
M a s c h i n e n f a b r i k G m b H Pneumatic Angle Grinder also for Underwater Use Type 1 4311 0050 Illustration can differ from the original Repair Manual and Spare Parts List Compiled: 22.06.11 143110050_Inst_en_Version_00
series Walter Schumacher Impuls-Technik GmbH
Walter Schumacher Impuls-Technik GmbH Reessweg 7 D-74626 Bretzfeld - Bitzfeld series 250-251 phone +49 (0) 79 46 91 30-0 fax +49 (0) 79 46 91 30-10 email info@sit-ventile.de internet www.sit-ventile.de
Standard Cylinder Series SZ 100
Standard Cylinder Series SZ 100 Maximum operating pressure up to 100 bar Choice of 13 different piston sizes between 12 und 200mm and 23 different attachments Rugged yet compact design with good guiding
02A)-D-EU-IT-TRIFLEX SOLO- G :24 Uhr Seite 4 R -robotic e-chains 3D triflex 2.4
3D-robotic e-chains triflex R 2.4 2.5 triflex R - 3-dimensional e-chains for robots triflex R (R for "round") is the third generation of multi-axis e-chains. Design features include: Optional fibre rod
...our linkages, your solution. Rod Ends
...our linkages, your solution Technical Information Introduction All of our rod ends incorporate either a plain spherical bearing, ball bearing, or roller bearing. Below is an overview of each type. Plain
M24X
Rod Ends Female Self-aligning bearing used for control linkages. Able to take tensile and compressive loads, steel on composite, complete with lubricating nipple. Body: Carbon steel S45C (C45 Din) Ball:
AEROSPACE BEARINGS. Plain Bearings. Self-Lubricated Journal Bearings Descriptions. Spherical Bearings Descriptions
Plain Bearings AEROSPACE BEARINGS Self-Lubricated Journal Bearings Descriptions Spherical Bearings Descriptions Self-Lubricated Rod Ends Descriptions SELF-LUBRICATED JOURNAL BEARINGS STRAIGHT ALUMINIUM
Heavy-Duty Rod Ends - Male with integral spherical plain bearing
Heavy-Duty Rod Ends - Male with integral spherical plain bearing 65700 Order No. Thread (hand) d 1 l 1 d 2 d 3 d 4 l 2 l 3 X g H7 65700.W0005 Right 5 33 M 5 11,11 18 20 9 14 65700.W0006 Right 6 36 M 6
Energy Chain System E2 Medium Series 200/240/250
Energy Chain System E2 Medium //.98.98.98 Price Index Features & Benefits Dirt-repellent contoured exterior // Cable-friendly, smooth interior with modular interior separation Special Features / Options
8 (800) (звонок бесплатный) Length tolerances for shafts to DIN 7168, medium series.
2 Guiding systems Fig 20 SKF precision shafts ( fig 20 ) can be supplied either as solid or hollow shafts. The solid shafts are available in all dimensions required to fit SKF linear ball bearings; the
Product overview. Joints. Circlips for ball seats DIN K0714. Quick plug couplings with radial offset compensation K0709. Page 837.
Joints 825 Product overview Joints Quick plug couplings with radial offset compensation K0709 Quick plug couplings with radial offset compensation and screw-on flange K0710 Quick plug couplings with angular
Assembly instructions
Assembly instructions Important notes on VOSS assembly instructions In order to ensure maximum performance and functional reliability of VOSS products, the respective assembly instructions, operating conditions
igubal Pivoting bearings Articulated heads Pivoting pedestal bearings High-performance polymers
igubal Pivoting bearings Articulated heads Pivoting pedestal bearings High-performance polymers igubal - self-adjusting, maintenance-free sliding bearings made of high-performance plastics igubal puts
Bearings and Spacers
Bearings and Spacers Section Contents Ball Bearings P4...Page 12 2 Bronze Bearings...Page 12 3 Moulded Bearings...Page 12 4 Bearing Pre load Washers...Page 12 Bearing Spacers...Page 12 6 Technical Information...Page
ELA Electromechanical Linear Actuators
ELA Electromechanical Linear Actuators D Electromechanical Linear Actuators ELA Electromechanical Linear Actuators (ELA) consist of a completely enclosed aluminium housing with worm gearing and axial bearing
05. YY XX. XX. series nominal size
Balflex MicroTest Check Line Hoses, Connectors & Gauges Balflex MicroTest is the range of hoses, couplings and gauges for check lines in hydraulic or refrigeration systems. Balflex MicroTest is produced
More products......plastics
2. iglide... More products.........plastics iglide more products - Product overview Clip bearings and Piston rings Clip bearings - Easy to fit, securely with the double flange design Clip2 bearings - Easy
E2 Medium - E-Chains with 2-part link design for a wide range of applications
igus E2 Medium E2 Medium - E-Chains with 2-part link design for a wide range of applications E2 Medium - the standard The E2 Medium Series is the largest of the E2 family of E-Chains features snap-open
FAG HYDRAULIC NUTS. FAG OEM und Handel AG
FAG HYDRAULIC NUTS FAG OEM und Handel AG CONTENTS Application Design Principle Design Variations Pressure Generators, Connection Pieces Dimensional Tables for FAG Hydraulic Nuts (Metric) Dimensional Tables
Piston rod attachments
Piston rod attachments q/w Worldwide: Superb: Easy: Festo core product range Covers 80% of your automation tasks Always in stock Festo quality at an attractive price Reduces procurement and storing complexity
Highest Precision: SPL Series
Highest Precision: SPL Series GAM can. Just ask! If you don t see exactly what you need, let us know. We can modify the SPL Series gearboxes to meet your needs. Page 3 provides a list of commonly requested
Air Handling Piping Systems
Air Handling Piping Systems ProVent - Compressed Air System - PP Vent Duct System www.asahi-america.com Table of Contents Table of Contents Product Specification... Page 350 SOCKET PIPE AND FITTINGS Pipe,
FAG Hydraulic nuts. Technical Product Information
FAG Hydraulic nuts Technical Product Information Contents Application 2 Design 2 Design variants 3 Pressure generators, connectors 4 Dimension tables for FAG hydraulic nuts (metric) 6 Dimension tables
2500 PSI STANDARD FEATURES 2500 PSI CYLINDERS
2500 PSI STANDARD FEATURES Intended Use: Double acting applications Rated Pressure: 2500 PSI Material: High Tensile SAE C1045, ground and polished hard chrome plated Barrel Material: High tensile SAE C1026/St52.3
Piston rod attachments
Piston rod attachments Co-ordinated with Festo s cylinder range Versatile combinations Sturdy and functional Stainless steel variants 2012/09 Subject to change Internet: www.festo.com/catalogue/... 1 Piston
ExpaTen The ideal connecting bolt Free from backlash Powerful Reusable. ExpaTen more than just a bolt.
ExpaTen The ideal connecting bolt Free from backlash Powerful Reusable ExpaTen more than just a bolt. ExpaTen Expa = Expansion = 100% positive locking in the flange bore Ten = Tension = frictional connection
BOCCOLE ERNESTO RAAB SRL
C A BOCCOLE T A L O G O NESTO RAAB SRL Via Ghisalba,3-2002 Ospiate di Bollate (MILANO) Tel.: 023830375 - Fax : 0238303207 http://www.ernestoraab.it e-mail: cuscinetti@ernestoraab.it Internal clearance
Mounting and operating instructions
Mounting and operating instructions Safety clutch SI Responsible Mädler branches according to German Post Code Areas: For Switzerland: PCA 1, 2 and 3 PCA 0, 4 und 5 PCA 6, 7, 8 und 9 Mädler-Norm-Antrieb
AL Series Standard Chain
Lift Chain Female End (outer) Male End (inner) 2x2 2x3 3x4 4x4 4x6 T 6x6 8x8 L-1 Loose Plates Fixed Plate Typical Connecting Link Male End Female End P D H AL Series Standard Chain PLATE PIN CL PIN PITCH
NEW* iglidur. igubal. NEW*: xiros. DryLin. DryLin. Service. Additional iglidur products
Overview with all new products, which are in this catalog for first time. With page reference to detailled pages with technical data and more. page 16 iglidur Polymer Plain Bearings Improve technology
Actuator. Series K. Heytec Antriebstechnik GmbH Heidemannstraße München
Actuator Series K Heytec Antriebstechnik GmbH Heidemannstraße 3 80939 München Phone: 089 / 31 21 35 0 Fax: 089 / 3 13 25 26 Email: info@heytec.de Internet: www.heytec.de Issue 07/2017 Table of contents
BRUTE II 4-VALVE Manifold
gauges Leak Detectors Detectors 20 BRUTE II 4-VALVE Manifold The Brute II 4-Valve Test Charging Manifold provides the flow that s proven faster than any conventional manifold. The aluminum alloy is forged
BEARINGS WITH CAGE - GUIDED NEEDLES
EARINGS WITH AGE - GUIE NEELES Technical features earings with cage - guie neeles ONSTRUTION The basic constructions of neele roller bearings are: 1 ) 10 ). Neele roller bearings with integral flanges
Hydraulic cylinder Type LHZ
Hydraulic cylinder Type LHZ Double acting Diam. 0 mm PN [pmax.] = 2 bar Connecting dimensions Diam. to following CETOP R 8 H and ISO/DIS /I Diam. to 0 as per CETOP R 73 H and ISO/DIS 7..0.08 Symbol Description
FF3000 PORTABLE FLANGE FACER
FF3000 PORTABLE FLANGE FACER FEATURES SETUP & OPERATION COMPONENTS & ACCESSORIES TECHNICAL DATA Compact, lightweight, and easy to set up. Compact and Versatile Patented, low profile machine is one of the
E6 Series E6.52 R6.52 Delivery program Extremely low-noise, minimum vibration, medium size
E6 Series Delivery program Extremely low-noise, minimum vibration, medium size... crossbars every 2 nd link... fully enclosed e-chains Series crossbars every 2 nd link (crossbars removable along both radii)
Thrust ball bearings. - double direction
Thrust ball bearings Thrust ball bearings are manufactured in two versions: single and double direction. These bearings can carry single or double direction heavy axial loads. - single direction - double
Combined Bearing/Freewheel CSK CSK..2RS
Combined Bearing/Freewheel CSK CSK..2RS TYPE CSK CSK..2RS T ype CSK is a sprag type freewheel integrated into a 62 series ball bearing (except sizes 8 and 40). It is bearing supported, delivered grease
114 NOSE SEIKO CO.,LTD NOSE SEIKO CO.,LTD
114 NOSE SEIKO CO.,LTD NOSE SEIKO CO.,LTD 115 and Part Code Applicable axis diameter Feature Part Code 5 ~ 3 General purpose cam follower with screwdriver groove on the stud head. Available with stainless
PRODUCT OVERVIEW HIGHEST PRECISION
PRODUCT OVERVIEW If you need high precision gear reducers at a reasonable cost and you value innovation and excellent service, take a close look at our product line. You ll find a wide range of products
INDEX METRIC SOCKET SCREWS. Page CAP HEAD SCREWS TORQUE INFORMATION 3
INDEX METRIC SOCKET SCREWS Page CAP HEAD SCREWS TORQUE INFORMATION 3 DIMENSIONAL INFORMATION 4-5 M1.6 - M5 6-7 M12 - M18 8 M20 - M27 9 M30 - M42 10 FINE PITCH CAP - M16 11 LOW HEAD SCREWS TECHNICAL INFORMATION
Shrink Discs, Smart-Lock & Shaft Couplings
RINGFEDER Products are available from MARYLAND METRICS Shrink Discs, Smart-Lock & Shaft Couplings US 08 2009 Partner for performance RINGFEDER Products are available from MARYLAND METRICS P.O. Box 261
drylin Stainless Steel
drylin Stainless Steel Lubrication-free Temperature-resistant up to +250 C Corrosion-resistant Chemical-resistant Standard parts with short 995 drylin Stainless Steel Machine parts made of are designed
*複合型/B _*複合型/B /05/25 10:10 ページ 151 Complex Bearings
Complex Bearings Complex bearings Complex Bearings complex bearing is comprised of a needle roller bearing of supporting radial load and a thrust bearing for supporting axial load which are assembled integrally.