AEROSPACE BEARINGS. Plain Bearings. Self-Lubricated Journal Bearings Descriptions. Spherical Bearings Descriptions
|
|
- Frank Snow
- 5 years ago
- Views:
Transcription
1
2 Plain Bearings AEROSPACE BEARINGS Self-Lubricated Journal Bearings Descriptions Spherical Bearings Descriptions Self-Lubricated Rod Ends Descriptions
3 SELF-LUBRICATED JOURNAL BEARINGS STRAIGHT ALUMINIUM BACKING M81934/1()A Self-Lubricated Journal Bearing, Straight STAINLESS STEEL BACKING M81934/1()C Self-Lubricated Journal Bearing, Straight FLANGED ALUMINIUM BACKING M81934/2()A Self-Lubricated Journal Bearing, Flanged STAINLESS STEEL BACKING M81934/2()C Self-Lubricated Journal Bearing, Flanged
4 SPHERICAL BEARINGS SELF-LUBRICATED STANDARD SERIES MS14101 Narrow Series, Grooved Type MS14102 Wide Series, Chamfered Type MS14103 Wide Series, Grooved Type MS14104 Narrow Series, Chamfered Type LINED BORE SERIES M81820/1 Narrow Series, Grooved Type M81820/2 Wide Series, Chamfered Type M81820/3 Wide Series, Grooved Type M81820/4 Narrow Series, Chamfered Type EUROPEAN SERIES EN2022 Lightweight Series EN2023 High Capacity Series EN2501 High Misalignment Series METAL TO METAL STANDARD SERIES M81936/1 Lubrication Grooves and Holes on Race and Ball, Grooved M81936/1()R Lubrication Grooves and Holes on Race only, Grooved M81936/2 Lubrication Grooves and Holes on Race and Ball, Chamfered M81936/2()R Lubrication Grooves and Holes on Race only, Chamfered EUROPEAN SERIES EN2335 Stainless Steel, Re-Lubricate Options
5 SELF-LUBRICATED ROD ENDS INTERNAL THREADS WIDE SERIES M81935/2 High Capacity Series NARROW SERIES M81935/5 Lightweight Series EXTERNAL THREADS WIDE SERIES M81935/1 High Capacity Series NARROW SERIES M81935/4 Lightweight Series
6 MS MS14101 Self-Lubricated Spherical Bearing AS AS14101 AS81820 (formerly MIL-B-81820) Narrow series, self-lubricated. Chamfered type (MS14104) Grooved type (MS14101) Liners qualified to AS81820 CHAMFERED PART NUMBERS GROOVED PART NUMBERS Bore O.D. Race Width Ball Width Other Dimensions NE MS NEG MS14101 B D H W P E M Q Static Limit Load Dash Dash Dash Dash Dash Dash (ref.) Radial Axial No-Load Rotational Breakaway Torque Inch- Pounds No. No. No. No. No. No Min LBF LBF LBF Standard "K" Type LBS , , , , , , A 5A -05A , , ,540 1,100 6, ,200 1,400 8, ,900 2,100 10, ,200 3,680 13, ,500 4,720 16, ,400 6,750 23, ,200 9,350 30, ,200 12,160 38, Oscillating Load Approx. Weight Race: 17-4PH Stainless Steel, heat-treated 1- For liner specifications, or other liners for high temperature or high Ball: 440C Stainless Steel, heat-treated speed, please see engineering section or contact RBC Aerospace Bearings Liner: Fibriloid or "E" Uniflon qualified to AS All load ratings are per AS Load ratings for sizes 3 & -4 are based on shaft bending rather than bearing capacity Bearing configuration Part number designations for a bore, grooved spherical bearing Base P/N (no options) NEG4 MS Low breakaway torque K NEG4K MS K Cadmium plating P NEG4C MS P 1 st oversize O.D. (0.010 ) T NEG4Q MS T 2 nd oversize O.D. (0.020 ) U NEG4U MS U PH13-8MO ball material C NEG4PH MS C
7 MS MS14103 Self-Lubricated Spherical Bearing AS AS14103 AS81820 (formerly MIL-B-81820) Wide series, self-lubricated. Chamfered type (MS14102) Grooved type (MS14103) Liners qualified to AS81820 CHAMFERED PART NUMBERS GROOVED PART NUMBERS Bore O.D. Race Width Ball Width Other Dimensions Static Limit No-Load Rotational WE MS WEG MS14103 B D H W P E M Q Load Oscillating Breakaway Torque Approx. Dash Dash Dash Dash Dash Dash (ref.) Radial Axial Load Inch-Pounds Weight No. No. No. No. No. No Min LBF LBF LBF Standard "K" Type LBS A 7A -7A Race: 17-4PH Stainless Steel, heat-treated 1- For liner specifications, or other liners for high temperature or high Ball: 440C Stainless Steel, heat-treated speed, please see engineering section or contact RBC Aerospace Bearings Liner: Fibriloid or "E" Uniflon qualified to AS All load ratings are per AS Load ratings for sizes 3 & -4 are based on shaft bending rather than bearing capacity Bearing configuration Part number designations for a bore, grooved spherical bearing Base P/N (no options) WEG4 MS Low breakaway torque K WEG4K MS K Cadmium plating P WEG4C MS P 1 st oversize O.D. (0.010 ) T WEG4Q MS T 2 nd oversize O.D. (0.020 ) U WEG4U MS U PH13-8MO ball material C WEG4PH MS C
8 M81820/4 M81820/1 Self-Lubricated Spherical Bearing, Lined Bore AS81820/4 AS81820/1 AS81820 (formerly MIL-B-81820) Narrow series, self-lubricated, lined bore. Chamfered type (M81820/4) Grooved type (M81820/1) Liners qualified to AS81820 CHAMFERED PART NUMBERS GROOVED PART NUMBERS Bore O.D. Housing Width Ball Width Other Dimensions No-Load Rotational NEE M81820/ NEEG M81820/1 B D H W P E Q Static Limit Load Oscillating Breakaway Torque Approx. Dash Dash Dash Dash Dash Dash (ref.) Radial Axial Load Inch-Pounds Weight No. No. No. No. No. No LBF LBF LBF Standard "K" Type LBS , , , , ,200 1,100 4, ,950 1,400 6, ,250 2,100 8, ,150 3,680 10, ,700 4,720 13, ,600 6,750 19, ,950 9,350 26, ,800 12,160 35, Race: 17-4PH Stainless Steel, heat-treated 1- For liner specifications, or other liners for high temperature or high Ball: PH13-8MO Stainless Steel, heat-treated speed, please see engineering section or contact RBC Aerospace Bearings Liner: Fibriloid or "E" Uniflon qualified to AS All load ratings are per AS81820 Bearing configuration Part number designations for a bore, grooved spherical bearing Base P/N (no options) NEEG4 M81820/1-4 Low breakaway torque K NEEG4K M81820/1-4K Cadmium plating P NEEG4C M81820/1-4P 1 st oversize O.D. (0.010 ) T NEEG4Q M81820/1-4T 2 nd oversize O.D. (0.020 ) U NEEG4U M81820/1-4U
9 M81820/2 M81820/3 Self-Lubricated Spherical Bearing, Lined Bore AS81820/2 AS81820/3 AS81820 (formerly MIL-B-81820) Wide series, self-lubricated, lined bore. Chamfered type (M81820/2) Grooved type (M81820/3) Liners qualified to AS81820 CHAMFERED PART NUMBERS GROOVED PART NUMBERS Bore O.D. Race Width Ball Width Other Dimensions No-Load Rotational WEE M81820/ WEEG M81820/3 B D H W P E Q Static Limit Load Oscillating Breakaway Torque Approx. Dash Dash Dash Dash Dash Dash (ref.) Radial Axial Load Inch-Pounds Weight No. No. No. No. No. No LBF LBF LBF Standard "K" Type LBS ,300 1,640 4, ,000 2,630 6, ,300 3,650 8, A 7A -7A ,300 3,650 8, ,400 4,970 10, ,600 5,370 13, ,000 6,130 16, ,000 7,730 24, ,000 10,800 26, ,000 19,300 49, Race: 17-4PH Stainless Steel, heat-treated 1- For liner specifications, or other liners for high temperature or high Ball: PH13-8MO Stainless Steel, heat-treated speed, please see engineering section or contact RBC Aerospace Bearings Liner: Fibriloid or "E" Uniflon qualified to AS All load ratings are per AS81820 Bearing configuration Part number designations for a bore, grooved spherical bearing Base P/N (no options) WEEG4 M81820/3-4 Low breakaway torque K WEEG4K M81820/3-4K Cadmium plating P WEEG4C M81820/3-4P 1 st oversize O.D. (0.010 ) T WEEG4Q M81820/3-4T 2 nd oversize O.D. (0.020 ) U WEEG4U M81820/3-4U
10 M81936/1 M81936/2 Metal-to-Metal Spherical Bearing AS81936/1 AS81936/2 AS81936 (formerly MIL-B-81936) Beryllium-Copper Ball Chamfered type (M81936/2) Grooved type (M81936/1) Lubrication holes and grooves on the race (Race Lubrication) Lubrication holes and grooves on the race and ball (Race and Ball Lubrication) CHAMFERED PART NUMBERS GROOVED PART NUMBERS Race & Ball Lubrication Race Lubrication Race & Ball Lubrication Race Lubrication Bore O.D. Race Width Ball Width Other Dimensions Radial M81936/ M81936/ M81936/ M81936/1 B D H W P E Q Static Limit K L Dash Dash Dash Dash Dash Dash Dash Dash (ref.) Load No. No. No. No. No. No. No. No Min Max Min Max LBF R R , R R , R R , R R , R R , R R , R R , R R , B R R , R R , R R , R R , R R , R R , R R ,000 Race: 17-4PH Stainless Steel, heat-treated 1- Race lubrication indicates lubrication grooves and grease holes in race only Ball: Beryllium-Copper 2- Race and ball lubrication indicates grooves and grease holes in race and ball 3- For other material combinations please see engineering section or contact RBC Aerospace Bearings Bearing configuration Part number designations for a bore, race & ball lubrication, grooved spherical bearing Base P/N (no options) M81936/1-4 1 st oversize O.D. (0.010 ) T M81936/1-4T 2 nd oversize O.D. (0.020 ) U M81936/1-4U
11 M81935/1 Self-Lubricated Rod End Bearing AS81935/1 AS81935 (formerly MIL-B-81935) Wide series, self-lubricated, external threads. Spherical bearings per AS81820 PART NUMBERS Ball Body Head Length to Thread Thread Ball Flat Keyway No-Load Bore Width Width Diameter Center of Ball Length Size Diameter Flat Keyway Mis- Ultimate Rotational ME M81935/1 B W H D F L E A G K P alignment angle Static Radial Fatigue Axial Proof Approx. Breakaway Torque Dash Dash Dash Q Load Load Load Weight Inch-Pounds No. No. No UNJF-3A Min Min LBF LBF LBF LBS Min Max Body: 4340 Alloy steel, heat-treated, magnetic particle inspection For liner specifications or the following options: cadmium plated and chromate treated -Stainless steel rod end body Race: 17-4PH Stainless Steel, heat-treated -High temperature or high speed liners Ball: 440C Stainless Steel, heat-treated please see engineering section or contact RBC Aerospace Bearings. Liner: Fibriloid or "E" Uniflon qualified to AS81820 Bearing configuration Part number designations for a bore rod end Base P/N (no options) ME M81935/1-4 Keyway on threads MEK M81935/1-4K Left hand thread MEL M81935/1-4L
12 M81935/2 Self-Lubricated Rod End Bearing AS81935/2 AS81935 (formerly MIL-B-81935) Wide series, self-lubricated, internal threads. Spherical bearings per AS81820 PART NUMBERS FE M81935/2 Dash Dash Dash No. No. No Bore Ball Body Head Length to Completed Thread Ball Flat Width Across Height of Centerline Across Internal No-Load Width Width Diameter Center of Ball Thread Size Diameter Flats Flats Drill to End Corners Depth Mis- Ultimate Rotational B W H D F L E A R C G S M alignment angle Static Radial Fatigue Axial Proof Approx. Breakaway Torque Q Load Load Load Weight Inch-Pounds Min UNJF-3B Min Ref. Max Min LBF LBF LBF LBS Min Max ,360 1,470 1, ,860 2,380 1, ,180 3,020 1, ,550 3,570 1, ,000 4,800 1, ,500 8,260 2, ,900 9,180 2, ,300 11,600 2, ,500 13,100 3, ,300 30,400 4, Body: 4340 Alloy steel, heat-treated, magnetic particle inspection For liner specifications or the following options: cadmium plated and chromate treated -Stainless steel rod end body Race: 17-4PH Stainless Steel, heat-treated -High temperature or high speed liners Ball: 440C Stainless Steel, heat-treated please see engineering section or contact RBC Aerospace Bearings. Liner: Fibriloid or "E" Uniflon qualified to AS81820 Bearing configuration Part number designations for a bore rod end Base P/N (no options) FE M81935/2-4 Keyway on threads FEK M81935/2-4K Left hand thread FEL M81935/2-4L
13 M81935/4 Self-Lubricated Rod End Bearing AS81935/4 AS81935 (formerly MIL-B-81935) Narrow series, self-lubricated, external threads. Liner qualified to AS81820 PART NUMBERS Ball Body Head Length to Thread Thread Ball Flat Keyway Bore Width Width Diameter Center of Ball Length Size Diameter Flat Keyway Misalignment Ultimate ME- AN M81935/4 B W H D F L E A G K P angle Static Radial Fatigue Axial Proof Approx. No-Load Rotational Breakaway Torque Dash Dash Q Load Load Load Weight Inch-Pounds No. No UNJF-3A Min Min LBF LBF LBF LBS Min Max ,000 1, ,300 1, ,600 2, ,000 3,600 1, ,800 5,000 1, ,200 6,800 2, ,500 10,800 2, ,600 16,000 2, ,400 21,900 3, ,400 28,600 3, Body: 4340 Alloy steel, heat-treated, magnetic particle inspection For liner specifications or the following options: cadmium plated and chromate treated -Stainless steel rod end body Race: 17-4PH Stainless Steel, heat-treated -High temperature or high speed liners Ball: 440C Stainless Steel, heat-treated please see engineering section or contact RBC Aerospace Bearings. Liner: "E" Uniflon qualified to AS81820 Bearing configuration Part number designations for a bore rod end Base P/N (no options) ME4AN M81935/4-4 Keyway on threads MEK4AN M81935/4-4K Left hand thread MEL4AN M81935/4-4L
14 M81935/5 Self-Lubricated Rod End Bearing AS81935/5 AS81935 (formerly MIL-B-81935) Narrow series, self-lubricated, internal threads. Liner qualified to AS81820 PART NUMBERS FE- AN M81935/5 Dash Dash No. No Ball Body Head Length to Completed Thread Ball Flat Width Across Height of Centerline Across Internal No-Load Bore Width Width Diameter Center of Ball Thread Size Diameter Flats Flats Drill to End Corners Depth Misalignment Ultimate Rotational B W H D F L E A R C G S M angle Static Radial Fatigue Axial Proof Approx. Breakaway Torque Q Load Load Load Weight Inch-Pounds Min UNJF-3B Min Ref. Max Min LBF LBF LBF LBS Min Max Body: 4340 Alloy steel, heat-treated, magnetic particle inspection For liner specifications or the following options: cadmium plated and chromate treated -Stainless steel rod end body Race: 17-4PH Stainless Steel, heat-treated -High temperature or high speed liners Ball: 440C Stainless Steel, heat-treated please see engineering section or contact RBC Aerospace Bearings. Liner: "E" Uniflon qualified to AS81820 Bearing configuration Part number designations for a bore rod end Base P/N (no options) FE4AN M81935/5-4 Keyway on threads FEK4AN M81935/5-4K Left hand thread FEL4AN M81935/5-4L
15 M81934/1 Self-Lubricated Straight Journal Bearing AS81934/1 AS81934 (formerly MIL-B-81934) Aluminum and stainless steel Liners qualified to AS81934 PART NUMBERS PART NUMBERS Outside Diameter Stainless Steel Aluminum Bore D PBE( )C M81934/1( )C PBE( )A M81934/1( )A Bore B Aluminum Steel WEIGHT LB/IN (REF) Dash Dash Dash Dash Dash Dash Nominal L=1.000 No. No. No. No. No. No. Size Aluminum Steel Sleeve: Aluminum: 1- For liner specifications or the following options: Alloy 2024-T851 -High temperature or high speed liners anodized or chemical film treatment please see engineering section or contact RBC Aerospace Bearings. Stainless Steel: 2- Must add length code to basic part numbers in multiples of 1/32" 17-4PH Stainless Steel, heat treated (dimension "L" on the drawing) Liner: Fibriloid or "E" Uniflon qualified to AS Load ratings per AS81934 Static Limit (Alum.) = 50,000 B x (L-.100) (LBS) Static Limit (Cres) = 78,500 B x (L-.100) (LBS) Dynamic Limit = 37,500 B x (L-.100) (LBS) Bearing configuration Part number designations for a bore and long aluminum journal bearing Base P/N (no options) PBE04A08 M81934/1-4A008 Cadmium plating P PBE04A08C M81934/1-4A008P 1 st oversize O.D. (0.010 ) T PBE04A08Q M81934/1-4A008T 2 nd oversize O.D. (0.020 ) U PBE04A08U M81934/1-4A008U
16 M81934/2 Self-Lubricated Flanged Journal Bearing AS81934/2 AS81934 (formerly MIL-B-81934) Aluminum and stainless steel Liners qualified to AS81934 PART NUMBERS PART NUMBERS Outside Diameter Flange Flange Stainless Steel Aluminum Bore Bore D Width Diameter SLEEVE WEIGHT FLANGE WEIGHT FBE( )C M81934/2( )C FBE( )A M81934/2( )A Nominal B Aluminum Steel F H LB/IN (REF) LB/IN (REF) Dash Dash Dash Dash Dash Dash Size L=1.000 No. No. No. No. No. No Aluminum Steel Aluminum Steel Sleeve: Aluminum: 1- For liner specifications or the following options: Alloy 2024-T851 -High temperature or high speed liners anodized or chemical film treatment please see engineering section or contact RBC Aerospace Bearings. Stainless Steel 2- Must add length code to basic part numbers in multiples of 1/32" 17-4PH Stainless Steel, heat treated (dimension "L" on the drawing) Liner: Fibriloid or "E" Uniflon qualified to AS Load ratings per AS81934 Static Limit (Alum.) = 50,000 B x (L-.130) (LBS) Static Limit (Cres) = 78,500 B x (L-.130) (LBS) Dynamic Limit = 37,500 B x (L-.130) (LBS) Bearing configuration Part number designations for a bore and long stainless steel journal bearing Base P/N (no options) FBE04C08 M81934/2-4C008 Cadmium plating P FBE04C08C M81934/2-4C008P 1 st oversize O.D. (0.010 ) T FBE04C08Q M81934/2-4C008T 2 nd oversize O.D. (0.020 ) U FBE04C08U M81934/2-4C008U
17 EN2022 Self-Lubricated Spherical Bearing European Standards Light series, self-lubricated. Chamfered type (EN2022S) Grooved type (EN2022R) Liner qualified to AS81820 Ball Outer race Chamfer (S) V-groove (R) Loads Movement Dash ø d B ø D C Radial Axial Oscillating No-load rotational ø d1 r1 ø K r ø N P R Weight No Bore Width O. diam. Width Cs Ca Load Angle breakaway torque Tol. mini Tol a (kn) (Nm) (g) (µm) (µm) , , to to , to , to to , to All dimensions are metric. Race: 17-4PH Stainless Steel, heat-treated Ball: 440C Stainless Steel, heat-treated Liner: Uniflon qualified to AS81820 Bearing configuration Chamfered outer ring Grooved outer ring Part number designations for a 12mm bore, wide series, spherical bearing EN2022S12 EN2022R12
18 EN2023 Self-Lubricated Spherical Bearing European Standards Normal series, self-lubricated. Chamfered type (EN2023S) Grooved type (EN2023R) Liner qualified to AS81820 Wide series Narrow series Ball Outer race Chanfrein (S) V-groove (R) Loads Movement Dash ø d ø d1 B ø D C Radial Axial Oscillating Angle No-load rotational ø K r ø N P R Weight No Bore Width O. diam. Width Cs Ca Load a breakaway torque Tol. mini Tol Tol (kn) (Nm) (g) (µm) (µm) (mm) L to L L L L to L L L to L to E to E E to E E to E E to All dimensions are metric. Race: 17-4PH Stainless Steel, heat-treated Ball: 440C Stainless Steel, heat-treated Liner: Uniflon qualified to AS81820 Bearing configuration Chamfered outer ring Grooved outer ring Part number designations for a 12mm bore, wide series, spherical bearing EN2023S12L EN2023R12L
19 EN2501 High-Misalignment Self-Lubricated Spherical Bearing European Standards Extended inner ring, self-lubricated. Liner qualified to AS81820 Dash No Ball Outer race V-groove (R) Loads Movement ø d ø d1 B ø D C Radial Axial Oscillating No-load rotational ø K ø N P R Weight Bore Width O. diam. Width Cs Ca Load Angle breakaway torque Tol. mini Tol a (kn) (Nm) (g) (µm) (µm) to 0.12 to All dimensions are metric. Race: 17-4PH Stainless Steel, heat-treated Ball: 440C Stainless Steel, heat-treated Liner: Uniflon qualified to AS81820 Bearing configuration Basic P/N Part number designations for a 8mm bore spherical bearing EN
20 EN2335 Metal-to-Metal Spherical Bearing European Standards Swaged series, metal-to-metal. Chamfered or grooved type Lubrication holes and grooves on the race Lubrication holes and grooves on the race and ball Ball Outer race Chamfer Lube hole V-groove (R) (S) and groove Loads Movement Dash ø d ø d1 B ø D C r Radial Axial Axial play Radial play Angle ø K ø N P R E F No Bore Width O. diam. Width Cs Ca a Weight Tol. mini h11 approx. Tol mini. (kn) (µm) maxi. (µm) (µm) (µm) (g) à à à à à 80 5 à à à à All dimensions are metric. Race: 17-4PH Stainless Steel, heat-treated Ball: 440C Stainless Steel, heat-treated Bearing configuration Chamfered outer ring Grooved outer ring Reduced radial play No lubrication hole and grooves Lubrication holes and grooves in the ball only Lubrication holes and grooves in the ball and race Part number designations for a 12mm bore spherical bearing EN2335S12 EN2335R12 EN2335P12 EN E EN F EN G
21
Long-Life Self-Lubricating Spherical Bearings
Long-Life Self-Lubricating Spherical Bearings ASTRO Division Introduction Long-Life Self-Lubricating Spherical Bearings Featuring NHBB s MK Liner System Introducing the industry s first self-lubricating
More informationSECTION 2. SPHERICAL BEARINGS Metal-to-Metal
ECIN 2 HERICAL EARING Metal-to-Metal A81936 eryllium Copper all.....................................14 MIL--8976 (proposed as A8976) Narrow...........................16 Narrow...........................................................18
More informationGeneral Purpose Clutches FSO/HPI
General Purpose Clutches FSO/HPI Overrunning, Indexing, Backstopping Ball Bearing Supported, Sprag Clutches Model FSO General purpose, ball-bearing clutches suitable for overrunning, backstopping and light
More informationDownloaded from MILITARY STANDARD
NOTICE 1 TO ALL HOLDERS OF : MILITARY STANDARD BEARINGS, CONTROL SYSTEM COMPONENTS, AND ASSOCIATED HARDWARE USED IN THE DESIGN AND CONSTRUCTION OF AEROSPACE MECHANICAL SYSTEMS AND SUBSYSTEMS 1. REPLACE
More informationAre you looking for specific bearing units in all kinds of different types from one single supplier? We make it easy for you to find the right one.
Are you looking for specific bearing units in all kinds of different types from one single supplier? We make it easy for you to find the right one. Plain Bearing Units Geometric Shape Range: Bushings,
More informationDryLin R Linear Plain Bearings, Fast and Quiet
+90º 40º +250º 100º Linear Plain Bearings, Fast and Quiet linear plain bearings, made from solid polymers, are dimensionally equivalent to standard ball bearings. They are made entirely of wear resistant
More informationDryLin R Linear Plain Bearings, Fast and Quiet
+90º 40º +250º 100º Linear Plain Bearings, Fast and Quiet linear plain bearings, made from solid polymers, are dimensionally equivalent to standard ball bearings. They are made entirely of wear resistant
More informationCYLINDRICAL ROLLER BEARING CATALOG TIMKEN THRUST AND PLAIN BEARINGS CATALOG
CYLINDRICL ROLLER BERING CTLOG TIMKEN THRUST ND PLIN BERINGS CTLOG Spherical Plain Bearings SPHERICL PLIN Overview: Timken s spherical plain bearings consist of a spherically ground inner ring housed in
More informationDryLin R Linear Plain Bearings, Fast and Quiet
+90º 40º +250º 100º Linear Plain Bearings, Fast and Quiet linear plain bearings, made from solid polymers, are dimensionally equivalent to standard ball bearings. They are made entirely of wear resistant
More informationDryLin R Linear Plain Bearings, Fast and Quiet
+90º 40º +250º 100º Linear Plain Bearings, Fast and Quiet linear plain bearings, made from solid polymers, are dimensionally equivalent to standard ball bearings. They are made entirely of wear resistant
More informationDryLin R - Linear Plain Bearings - Fast and Quiet. Linear Bearings. DryLin R. Fax Phone Corrosion resistant
Linear Bearings - Linear Plain Bearings - Fast and Quiet Corrosion resistant Wear resistant Resistant to contaminants Low coefficient of friction Extremely quiet operation Lightweight 29.1 DryLin Linear
More informationHeavy-Duty Rod Ends - Male with integral spherical plain bearing
Heavy-Duty Rod Ends - Male with integral spherical plain bearing 65700 Order No. Thread (hand) d 1 l 1 d 2 d 3 d 4 l 2 l 3 X g H7 65700.W0005 Right 5 33 M 5 11,11 18 20 9 14 65700.W0006 Right 6 36 M 6
More informationProduct overview. Joints. Circlips for ball seats DIN K0714. Quick plug couplings with radial offset compensation K0709. Page 837.
Joints 825 Product overview Joints Quick plug couplings with radial offset compensation K0709 Quick plug couplings with radial offset compensation and screw-on flange K0710 Quick plug couplings with angular
More informationTechnical Data, Dimensioning, Mounting
6 Bosch Rexroth AG R310EN 3105 (2005.06) and Shafts Technical Data, Dimensioning, Mounting Speed v max = 5 m/s Acceleration a max = 150 m/s 2 Operating temperature 20 C to +100 C Dimensioning The load
More informationSTEELS WITH HIGH MECHANICAL STRENGTH REINFORCED RIVETING. REINFORCED RESISTANCE to shocks et to misalignment
STANDARD CHAINS - SOLID INS ISO STANDARD CHAINS - 1977 RANGE OF CONVEYOR CHAINS STEELS WITH HIGH MECHANICAL STRENGTH improved material RESISTANCE & HARDNESS Increased BREAKING LOADS (see table on next
More informationBEARING, SHAFTS, CLAMPS, COLLARS & HUBS
BEARING, SHAFTS, CLAMPS, COLLARS & HUBS Table of Contents HUBS Gear, Dial and Sprocket Assembies - Tech Info.....MI 2 Phase Adjustable Hub........................MI 3 Quick-2-Lock Hub..........................MI
More informationLinear Bushings and Shafts Inch Series
Industrial Hydraulics Electric Drives and Controls Linear Motion and Assembly Technologies Pneumatics Service Automation Mobile Hydraulics Linear Bushings and s Inch Series The Drive and Control Company
More informationSeries CP95. Profile Design ISO/VDMA Air Cylinder. Increased kinetic energy absorption. Improved end of stroke cushion capacity
Profile Design ISO/VDMA Air Cylinder Series CP95 Improved end of stroke cushion capacity Piston rod lurching has been eliminated at the end of stroke positions by means of a floating seal mechanism. Increased
More informationBearings and Spacers
Bearings and Spacers Section Contents Ball Bearings P4...Page 12 2 Bronze Bearings...Page 12 3 Moulded Bearings...Page 12 4 Bearing Pre load Washers...Page 12 Bearing Spacers...Page 12 6 Technical Information...Page
More informationWorm gear S 345. Properties: General: Single-stage worm gear For use in combination with our motors.
S 345 Aluminium Power deviation 90 Options: Special shaft, 2nd shaft end Loading capacity Max. radial force N 100 Max. axial force N 50 Mounting Shaft diameter mm 6 Weight kg 1.2 Flange 5 1.8 0.65 10 1.9
More informationAutomatic exchange of robot hand tools, FMS (flexible manufacturing system) implemented for assembly lines.
AHC System Series MA Automatic exchange of robot hand tools, FMS (flexible manufacturing system) implemented for assembly lines. The robot hand tools change automatically to accommodate workpieces of different
More informationDETAIL SPECIFICATION SHEET SLEEVE, SWAGING-WIRE ROPE
INCH-POUND 30 September 2011 SUPERSEDING MS51844D 19 April 2007 DETAIL SPECIFICATION SHEET SLEEVE, SWAGING-WIRE ROPE This specification is approved for use by all Departments and Agencies of the Department
More informationPublication BCRKB.Rev00EN. RKB Europe SA 2018/07
BEARING CATALOGUE Publication BCRKB.Rev00EN RKB Europe SA 2018/07 Every care has been taken to ensure the accuracy of the information in the present document but no liability can be accepted fony errors,
More informationBearings. Rolling-contact Bearings
Bearings A bearing is a mechanical element that limits relative motion to only the desired motion and at the same time it reduces the frictional resistance to the desired motion. Depending on the design
More informationSelection Tool. on the Internet at in the section MÄDLER -Tools. Other sizes and designs on request. Connecting Shafts Page 766
Couplings Overview Friction Clutches Friction Clutches Type B Axial Arrangement Friction Clutches Type C Transversal Flexibility Sliding Hubs with Torsionally-Flexible Coupling Multi-Disk Friction Clutches
More informationWire Reinforced Synthetic Rubber Hose Assemblies
Aeroquip Wire Reinforced Synthetic Rubber Hose Assemblies Lightweight and Flexible Qualified to Industry Standards Integral Abrasion and Fire Resistance Covers Available Aeroquip Wire Reinforced Synthetic
More informationTimken Spherical Plain Bearings. An industry standard throughout the world.
Timken Spherical Plain Bearings An industry standard throughout the world. From construction and mining to drawbridges, actuators and even the space shuttle crawler, Timken spherical plain bearings have
More information...our linkages, your solution. Rod Ends
...our linkages, your solution Technical Information Introduction All of our rod ends incorporate either a plain spherical bearing, ball bearing, or roller bearing. Below is an overview of each type. Plain
More informationRODLESS CYLINDER SERIES PU ACTUATORS
RODLESS CYLINDER SERIES PU 1 RODLESS CYLINDER SERIES PU RODLESS CYLINDER SERIES PU Series PU rodless cylinders have an internal strip for longitudinal tightness made of polyurethane (PU) with a harmonic
More informationTechnical Data. Product Information. Rod Ends
Technical Data Product Information Rod Ends Aurora Bearing Company rod ends are manufactured utilizing two construction styles. They are of the two or three-piece type. Both types feature the advantages
More informationProduct program. Rod ends and spherical bearings. Bearings and steel balls. ASK Bearing units. ASK Product program. ASAHI Bearing units
Product program 1 2 3 4 5 6 7 8 Rod ends and spherical bearings Bearings and steel balls ASK Bearing units ASAHI Bearing units Metric cam follower bearings Slide bushes Shaft-hub-connections Clevises and
More informationV Series. For more information, call us toll-free at 888-GAM-7117 Visit for 2-D and 3-D Drawings
V Series L3 B0 G0 ØD4 f7 ØD6 L6 L6 L8 f3 f1 2 ØD3 4 C0 H0 6 5 f2 L7 ØD2 j6 0 3 9 1 1 L4 D0 J0 ØD1j6 f4 ØD12 ØD13 f7 60 Major Dimensions (Applies to all models) Input Dimensions that change based on ratio
More informationWBK 08 S - 01 A WBK 25 DF - 31H. Accessories. (For light load) (For high speed and heavy load) 3. Reference number coding
3. Reference number coding (For light load) xample: Product code for support unit ominal size code * WK 8 S - 1 ounting code o code: Fixed support unit S: Simple support unit SF: Simple support unit (for
More informationTechnical Data Index
Technical Data Index Description Page Product Information 2-3 Specifications 4 Temperature Limits 4 Lubrication Grease 5 Dry Film 6 PTFE Liner 7 Bearing Misalignment 8 Suggested Housing Bores 9-11 Suggested
More information155 CARTRIDGE SINGLE SEAL
MECHANICAL SEAL INSTALLATION INSTRUCTIONS 155 CARTRIDGE SINGLE SEAL SEAL INSTALLATION Preparation Determine if the pump is in good condition. A. Check the shaft or sleeve. 1. Remove all burrs and sharp
More informationiglidur J The Fast and Slow Motion Specialist
iglidur The Fast and Slow Motion Specialist Used in long-life applications, also with soft shafts. The iglidur plain bearings are designed for the lowest coefficients of friction while running dry and
More informationSERIES RTC RODLESS CYLINDERS PNEUMATIC SHUTTLE TYPE
SERIES RTC RODLESS CYLINDERS PNEUMATIC SHUTTLE TYPE Series RTC Rodless Cylinder Pneumatic automation building block Series RTC (Rodless Thrust Cylinder)-High performance shuttle type rodless cylinders
More informationRubber Hose, Fittings & Assemblies for Aerospace Applications
Aeroquip Rubber Hose, Fittings & Assemblies for Aerospace Applications Lightweight and Flexible Qualified to Industry Standards Table of Contents 306 Low Pressure Hose, Fittings and Assemblies 1 303, 302A
More informationeline Ball Screw Assemblies
eline Ball Screw Assemblies R310EN 3314 (2005.06) The Drive & Control Company R310EN 3314 (2005.06) Bosch Rexroth AG 3 Product Overview 4 Technical Data 6 with Screw-in Single Nut ZEV-E-S Single fixed
More informationDETAIL SPECIFICATION SHEET SLEEVE, SWAGING-WIRE ROPE
INCH-POUND 3 December 2012 SUPERSEDING 30 September 2011 DETAIL SPECIFICATION SHEET SLEEVE, SWAGING-WIRE ROPE This specification is approved for use by all Departments and Agencies of the Department of
More informationChapter 11 Rolling Contact Bearings
Chapter 11 Rolling Contact Bearings 1 2 Chapter Outline Bearing Types Bearing Life Bearing Load Life at Rated Reliability Bearing Survival: Reliability versus Life Relating Load, Life, and Reliability
More informationPOWERGRIP 5MGT & POLY CHAIN 5MGT SPROCKETS
Section 4 POWERGRIP 5MGT & POLY CHAIN 5MGT SPROCKETS Use with 5mm PowerGrip GT or Poly Chain GT belts. 2MGT and 3MGT pulleys available on request, please contact Gates customer service. Identification
More informationOutput Shaft Assembly COMPONENTS
MT140 Component Parts (Output Shaft Assembly Output Shaft Assembly COMPONENTS DISASSEMBLY OF OUTPUT SHAFT ASSEMBLY 1. REMOVE SLEEVE FROM OUTPUT SHAFT Using SST, remove the sleeve from the output shaft.
More informationFEROGLIDE. Self lubricating bearings TECHNICAL MANUAL
FEROGLIDE Self lubricating bearings TECHNICAL MANUAL www.tenmat.com Page 1 Issue 2 Contents Topic Page Operating Parameters 3 Bearing Load Limits 3 Bearing Wear 4 Velocity Limit 4 Pressure Velocity (PV)
More informationTECHNICAL INFORMATION
General Nomenclature Spherical Roller Bearings The spherical roller bearing is a combination radial and thrust bearing designed for taking misalignment under load When loads are heavy, alignment of housings
More informationNHBB Capabilities... 90
SECTION 1 SPHERICAL BEARINGS Self-Lubricating (Downlad Tables PDF) SECTION 2 SPHERICAL BEARINGS Metal-to-Metal (Downlad Tables PDF) SECTION 3 LOADER SLOT BEARINGS (Downlad Tables PDF) SECTION 4 ROD END
More informationSlide-Rite & Slide-Rite CR Gearbox
Gearboxes Gearbox and CR Gearbox Pages 2 through 7 Float-A-Shaft (FAS) Gearbox Pages 8 through 24 Visit www.tolomatic.com for the latest updates, CAD files and ordering. GEARBOXES www.tolomatic.com 1 GEARBOXES
More informationSolutions for power transmission. MAV-standardisarja.
Solutions for power transmission MAV-standardisarja www.konaflex.fi L O C K I N G A S S E M B L I E S Shrink disc Mini Series Rigid Couplings www.mav.it our company We are an Italian company world renowned
More informationInstruction Manual for HSPA Take-Up Units
Installation Instruction Manual for HSPA Take-Up Units Warning: To ensure the drive is not unexpectedly started, turn off and lockout the power source before proceeding. Failure to observe these precautions
More informationDODGE USN 500 and 600 Series Adapter Mount & 200 and 300 Series Direct Mount Plummer Blocks
DODGE USN 500 and 600 Series Adapter Mount & 200 and 300 Series Direct Mount Plummer Blocks These instructions should be read thoroughly before installation or operation. GENERAL INFORMATION WARNING: To
More informationTrack Rollers/ Cam Followers
Track Rollers/ Cam Followers Page Nomenclature...................................... 460 Introduction....................................... 462 Identification....................................... 462
More informationHighest Precision: SPL Series
Highest Precision: SPL Series GAM can. Just ask! If you don t see exactly what you need, let us know. We can modify the SPL Series gearboxes to meet your needs. Page 3 provides a list of commonly requested
More informationintroduction WARRAnTY / DiScLAiMeR OF unstated WARRAnTieS / LiMiTATiOn OF LiABiLiTY Warranty. Disclaimer of unstated warranties.
BeLLOWS couplings Introduction Ruland Manufacturing Co., Inc. has been supplying carefully made products since 1937. We have manufactured everything from bicycle pumps to high pressure valves, including
More informationAerospace Standard Tube Size and Variable Diameter V-Band Couplings. Simplified Stock Long Life Vibration Proof Numerous Sizes Corrosion Resistant
Aerospace Standard Tube Size and Variable Diameter V-Band Couplings Simplified Stock Long Life Vibration Proof Numerous Sizes Corrosion Resistant V-Band Couplings Standard Tube Size and Variable Diameter
More informationAeroquip. Aluminum Compression Crimp Fittings
Aeroquip Aluminum Compression Crimp Fittings Table of Contents 666/667 Medium Pressure PTFE Hose and Aluminum Compression Crimp Fittings... 2 Aluminum Crimp Fittings... 3 Flared Fittings... 4 Flared Fitting
More informationLocking Assemblies Shrink Discs Rigid Couplings.
M I N I Locking Assemblies Shrink Discs Rigid Couplings www.mav.it our company We are an Italian company world renowned for our creativity and ethics. Established in 1989 we have rapidly built a reputation
More informationLow friction, low wear: The Fast and Slow Motion Specialist iglidur J
Low friction, low wear: The Fast and Slow Motion Specialist iglidur Over 250 sizes available from stock Low wear against different shaft materials Low coefficients of friction running dry Vibration dampening
More informationWorld Formula TECH MANUAL
World Formula TECH MANUAL Section 1 General Rules 1. Only stock Briggs & Stratton World Formula Model # 124435-8101 will be used in this class except as provided in this Tech manual. All parts will be
More informationComparison Chart. extremely difficult. Finally, separated components can rarely be re-used.
JAN 2014 Traditional Connections Why Go Keyless Keyed Bushing Systems Both QD and Taper-Lock bushing and weld-on hub systems are popular component mounting technologies. Yet both are ultimately keyed connections
More informationSealed Spherical Roller Bearings [WA Type]
Sealed Spherical Roller Bearings [WA Type] Note: Markings on the seal are not white in actual bearings. CAT. No. -@/E Up to five times longer service life Sealed Spherical Roller BearingsWA Type ULTAGE
More informationBearing Fundamentals. Timken Training
Bearing Fundamentals Timken Training AGENDA Basic Bearing Design Ball Bearings Cylindrical Roller Bearings (CRB) Spherical Roller Bearings (SRB) Tapered Roller Bearings (TRB) 2 BASIC BEARING DESIGN Anti-Friction
More informationCombined Bearing/Freewheel CSK CSK..2RS
Combined Bearing/Freewheel CSK CSK..2RS TYPE CSK CSK..2RS T ype CSK is a sprag type freewheel integrated into a 62 series ball bearing (except sizes 8 and 40). It is bearing supported, delivered grease
More informationFiberglide /Fabroid. Self-Lubricating Bearings. Featuring the highest load capacity maintenance-free bearings in the Industry
Fiberglide /Fabroid Self-Lubricating Bearings Featuring the highest load capacity maintenance-free bearings in the Industry ISO 9001:2000 www.rbcbearings.com 800.390.3300 RBC Bearings Incorporated (RBC
More informationNeedle Roller Bearings
Needle Roller Bearings INTERPRECISE Donath GmbH Ostring 2 90587 Obermichelbach Germany Phone +49-911-76630-0 Fax +49-911-76630-30 info@interprecise.de www.idc-bearings.com Needle roller bearings with flanges
More informationTIMKEN SNT SPLIT PLUMMER BLOCKS
TIMKEN SNT SPLIT PLUMMER BLOCKS TIMKEN SNT SPLIT PLUMMER BLOCKS 1 TABLE OF CONTENTS INTRODUCTION... 3 TIMKEN SNT SPLIT PLUMMER BLOCKS...4 SEAL OPTIONS AND DESCRIPTIONS...6 SEAL SELECTION AND CONFIGURATION
More informationPARALLEL INDEX DRIVES TP Series
PARALLEL INDEX DRIVES TP Series Calculations J = moment of inertia Application examples Direct driven belt/chain = M B + M B M B = c a n 2π n x t² M R = µ g R m = M B + M R + (M ST )* M ST = m g R M AN
More informationDifferential, Disassembling and Assembling Special tools
Differential, Disassembling and Assembling Special tools VAG 1582 Bearing puller VAG 1582/3 Grip piece VW 412 Thrust disc 40-105 Thrust piece VW 401 Thrust plate VW 402 Thrust plate VW 408 A Punch VW 473
More informationLIGHTWEIGHT AND COMPACT. SERIES SL Nm. single-position multi-position. THE ultimate COUPLING from Nm
LIGHTWEIGHT AND COMPACT L SAFETY COUPLINGS TOQLIGHT SEIES SL 5 700 Nm THE ultimate COUPLING from 5 700 Nm SEIES SL DESIGN / FEATUES Extremely lightweight construction Up to 60 % weight reduction in comparison
More informationActuator Products Rodless Cylinders. GDL Series. Material specifications. Specifications OSP-P. Series. Series P1X. Series P1Z.
Catalog PDN1-3US High Performance : (s FDC12HP-... thru FDC45HP-...) The High Performance series is the basis for s development, which is used in the majority of applications. High Performance guides consist
More informationLinear Bushings and Shafts. The Drive & Control Company
Linear Bushings and s The Drive & Control Company 2 Bosch Rexroth Corp. Linear Motion and Assembly Technologies Linear Bushings R310A 3100 Linear Motion Technology Ball Rail Systems Standard Ball Rail
More informationLinear Bushings and Shafts
Linear Bushings and s R310EN 3100 (2004.09) The Drive & Control Company R310EN 3100 (2004.09) Linear Bushings Bosch Rexroth AG 3 Linear Bushings and s Selection Guide 9 Product Overview 10 Overall Dimensions
More informationMINIATURE METAL BELLOWS COUPLINGS
VERSATILE AND PRECISE. Courtesy of CMA/Flodyne/Hydradyne Motion Control Hydraulic Pneumatic Electrical Mechanical (800) 426-5480 www.cmafh.com MINIATURE METAL BELLOWS COUPLINS SERIES MK 0.05 10 Nm THE
More informationTOUGH AND LONG LIFE (TL) SERIES SPHERICAL ROLLER BEARINGS
TOUGH AND LONG LIFE (TL) SERIES SPHERICAL ROLLER BEARINGS TOUGH PERFORMANCE IN HIGH TEMPERATURES. High temperature processing and manufacturing environments, such as those in the dryer section of paper
More informationFlexible couplings. Flexible Torsion shaft couplings... LB Coupling. BICO-TL Coupling...Technical data, Service faktor.
Flexible couplings Flexible Torsion shaft couplings... LB Coupling...Technical data, Service faktor... Dimensions, Type of rubber BICO-TL Coupling...Technical data, Service faktor... Dimensions, Type of
More informationSentry Precision Spindles
Sentry Precision s Value-Priced Sentry Precision Belt-Driven s The Sentry line is our standard building block spindle and is offered as a low-cost solution for many applications that call for a precision,
More informationTECHNICAL. AVAILABLE UPON REqUEST CHAPTER CONTENTS. Optical comparator: For process control during serial production.
TECHNICAL INFORmATION INFORmATION ABOUT CV / RE AVAILABLE UPON REqUEST Optical comparator: For process control during serial production. Engineering: Development and design using the latest CAD systems.
More informationBall Screw Support Bearings
Ball Screw Support Bearings. Ball Screw Support Bearings CONTENTS. Ball Screw Support Bearings q Angular contact thrust ball bearings A-BST series w Duplex angular contact ball bearings HT series e Needle
More informationAmphenol. eries SJT. Series SJT. VG 96912, Series 1 PAN JN 1003
Amphenol eries SJT Series SJT VG 96912, Series 1 PAN 6433-2 JN 1003 Ordering information Ordering example: SJT G 06 RT 14-35 P A 014 Series (p. 9, 15, 18) SJT Scoop proof (100% scoop-proof) Junior (Miniature
More informationShaft Couplings Flange-Couplings Rigid Shaft Couplings Flexible Couplings
Shaft Couplings Flange-Couplings Rigid Shaft Couplings Flexible Couplings 44 Edition 2013/2014 RINGSPANN Registered Trademark of RINGSPANN GmbH, Bad Homburg 2 Table of Contents Flange-Couplings Page Flange-Couplings
More informationS: With magnet. Bore x stroke (basic type) Cushion P: pneumatic adjustable
series MK Standard cylinders according to ISO 15552 How to order? M K A P S 50 x 100 M: Marani A: Double acting S: With magnet Bore x stroke (basic type) K: According to ISO 15552, Mickey-mouse type Cushion
More informationSeries W C D PACKAGING FOOD & BEVERAGE STEEL PULP & PAPER MINING. Cone Drive Operations, Inc. 240 East 12th Street Traverse City, MI 49684, USA
PACKAGING FOOD & BEVERAGE STEEL PULP & PAPER MINING C D Cone Drive Operations, Inc. 240 East 12th Street Traverse City, MI 49684, USA T +1 888 994 2663 E orders@conedrive.com W www.conedrive.com ACCUDRIVE
More informationFactors Influencing the Performance of Ball and Rolling Bearings
Factors Influencing the Performance of Ball and Rolling Bearings Course No: M02-033 Credit: 2 PDH Robert P. Tata, P.E. Continuing Education and Development, Inc. 9 Greyridge Farm Court Stony Point, NY
More informationFUNCTION OF A BEARING
Bearing FUNCTION OF A BEARING The main function of a rotating shaft is to transmit power from one end of the line to the other. It needs a good support to ensure stability and frictionless rotation. The
More informationLINEAR MOTION SYSTEM COMPONENTS
R RECISION NDUSTRIAL OMPONENTS R LINEAR MOTION SYSTEM COMPONENTS LINEAR MOTION SYSTEM COMPONENTS PIC Design has added a most comprehensive selection of precision components for linear motion applications.
More informationKIRLOSKAR ROMAK PUMP - RMK ISO 2858 / DIN EN / ISO 5199
KIRLOSKAR ROMAK PUMP - RMK ISO 2858 / DIN EN 22858 / ISO 5199 MAGNETIC DRIVE PUMP TYPE - RMK RANGE Discharge capacity (Q) : 3 Up to 300 m /hr Delivery head (H) : Up to 150 m (at 2900 rpm) Available nominal
More informationBall Screw Assemblies eline. The Drive & Control Company
Ball Screw Assemblies eline The Drive & Control Company 2 Bosch Rexroth Corp. Linear Motion and Assembly Technologies eline BSA R310A 3314 (2005.04) Linear Motion Technology Ball Rail Systems Standard
More informationRIGHT ANGLE DRIVES TG Series
RIGHT ANGLE DRIVES TG Series Right Angle Fixed Index Drives TG Series The rotary index table transforms a constant input drive motion into an intermittent output drive motion. The intermittent drive motion
More informationHORIZONTAL SPLIT CASING PUMPS TYPE : UP / UPL / UPH
HORIZONTAL SPLIT CASING PUMPS TYPE : UP / UPL / UPH HORIZONTAL AXIALLY SPLIT CASING PUMPS Range : Delivery size upto 1220 mm Capacity up to 24,000 m³/hr Head up to 180 meters Applications : Suitable for
More informationPerformance: Spiral Bevel Series
Performance: Spiral Bevel Series GAM can. If you don t see exactly what you need, let us know. We can modify the VC Series gearboxes to meet your needs. Page provides a list of commonly requested modifications
More informationDouble-row ball bearings
Double-row ball bearings Radial double-row ball bearings 262 Definition and capabilities 262 Series 262 Tolerances and clearances 262 Design criteria 263 Suffixes 263 Characteristics 264 Radial double-row
More informationCam Follower Bearings
Cam Follower Bearings RegalPTS.com/McGill McGill Precision Bearings Reduce Operating Cost CAMROL Cam Follower Selection Guide Condition How to identify Potential Solutions General Purpose Applications
More informationInkoturn couplings. INKOMA - GROUP Couplings. Product description. Inkoturn couplings IKT. FRANCIS AND FRANCIS Ltd.
Product description The INKOM Inkoturn coupling (IKT) is a flexible coupling with high torsional rigidity, which has been developed for applications requiring high speed and where shaft is present. INKOM
More informationigubal Pressfit Spherical Bearings Easy to fit Extremely cost-effective Chemical resistant Lightweight High strength
igubal Pressfit Spherical earings Easy to fit Extremely cost-effective Chemical resistant Lightweight High strength 835 igubal igubal Pressfit Spherical earings Ease of installation makes diverse applications
More informationTORQLIGHT SAFETY COUPLINGS
LIGHTWEIGHT AND COMPACT single-position TOQLIGHT SAFETY COUPLINGS SEIES SL 10 700 Nm THE ULTIMATE COUPLING FOM 10 700 Nm SEIES SL DESIGN / FEATUES Extremely lightweight construction Up to 60 % weight reduction
More information12.4 CYLINDRICAL ROLLER BEARINGS
12.4 CYLINDRICAL ROLLER BEARINGS Cylindrical roller bearings are manufactured in many designs, dimensions and sizes. The most common designs are single row cylindrical roller bearings with cage. Single
More informationMotion Technologies Bearing Products
Page 1 of 12 Motion Technologies Bearing Products LARGE DIAMETER BEARINGS (conventional design) o Deep groove ball to 1900mm bore page 3 o Four point contact ball to 500mm bore page 3 o Single row angular
More informationBacklash-free Metal Bellow Couplings
Backlash-free Metal Bellow Couplings Edition 3/2008 pioneer in innovation GERWAH pioneer in innovation Future made by GERWAH. Your advantages: The GERWAH name is synonymous with development and manufacturing
More informationMetal bellows couplings
Metal bellows couplings Product information / Design Typical characteristics of metal bellows couplings Backlash-free transmission of torque High torsional stiffness, precision of transmission of rotational
More informationFor advanced drive technology CLAMPEX. Shaft-hub-connection. KTR Precision joints CLAMPEX
technology CLAMPEX Shaft-hub-connection CLAMPEX KTR Precision joints 227 technology Table of contents Page Brief information 228 Selection and calculation 25-255 CLAMPEX -Selection Shaft diameter = d 0
More informationSLIDE-RITE CR GEARBOX
CORROSION RESISTANT SLIDE-RITE CR GEARBOX 1-44_ TOL-O-MATIC, INC. CORROSION RESISTANT COMPONENTS. EFFICIENT POWER PERFORMANCE IN ENVIRONMENTALLY TOUGH APPLICATIONS. Like Tol-O-Matic s original Slide-Rite
More information