drylin linear technology drylin shafts

Size: px

Start display at page:

Download "drylin linear technology drylin shafts"

Conrad Kelley
6 years ago
Views:

1 linear technology ard anodised aluminium for optimum running performances Stainless steel for high corrosion resistance ardened steel and stainless steel Carbon fibre Round with and without support

Advantages Product range Suitable liner materials: Aluminium Steel Soft Carbon fibre The all-rounder iglidur J The specialist iglidur J0 The extreme iglidur X The marathon runner iglidur 7 The

2 Advantages Product range Suitable liner materials: Aluminium Steel Soft Carbon fibre The all-rounder iglidur J The specialist iglidur J0 The extreme iglidur X The marathon runner iglidur 7 The FDA-compliant iglidur A180 Possible counter partner all shaft materials aluminium, hard anodised stainless steel steel/stainless steel shaft all shaft materials Application temperature - to +90 C - to +90 C - to +0 C - to +70 C - to +90 C est coefficient of friction with steel shaft aluminium, hard anodised steel hard chrome-plated steel/stainless steel shaft stainless steel shaft Maximum service life aluminium, hard anodised aluminium, hard anodised stainless steel steel/stainless steel shaft stainless steel shaft Permissible stat. surface pressure MPa 2 MPa 1 MPa 18 MPa 28 MPa Moisture absorption 1. % weight 0.7 % weight 0. % weight < 0.1 % weight 0.2 % weight Contact resistance > 1 Ωcm > 8 Ωcm < Ωcm > 9 Ωcm > Ωcm More information Page 141 Page 2 Page 24 Page 14 Page Marking Material Ø Ø 8 Ø Ø Ø SWUM SWUM WUM WUM WUMS CWM AWMP/ AWMU AWMR SWM SWUMN SWM SWUMN WM WUMN WM WUMN WMR WMS AWMPV N AW 01/ V CFK Composite Available shaft materials: Aluminium Ideal in combination with liners made from iglidur J/J0 Lightweight Low wear Corrosion resistant Available from stock Steel 7 liners for up to 8 times longer service life Low-priced standard igh load capacity Dry area applications ard chrome-plated also available Lower coefficient of friction against plastic bearings Stainless steel A180 liners for food and pharmaceutical applications igh corrosion resistance igh chemical resistance Ideal solution for wet applications V4A for extremely chemical intensive applications Please remember that this is a technical surface. Small colour variations are possible due to variable coating depths. Ø Ø Ø 1 / Ø 1 / Ø 1 Ø 0 1 Ø Tolerance 0.1 h9 h h h7 h7 h h h h h9 h9-0.1 mm Max. supply length Ø 8 Max. supply length Ø Surface 2,000 2,000 hard anodised / ground hard chromed / ground / ground drawn, polished UCU unidirectional/ cross winding/ unidirectional Surface roughness Ra < < 0. µm Wear Coefficient of friction Corrosion ardness up to V 0+4 RC 0+4 RC 2+8 RC 2+8 RC soft + - Aluminium, hard anodised Steel, Steel, chromed drawn + - Aluminium, hard anodised Steel, Steel, chromed drawn + - Aluminium, hard anodised Steel, Steel, chromed drawn Roundness 1/2 ø Tolerance 1/2 ø Tolerance 1/2 ø Tolerance 1/2 ø Tolerance 1/2 ø Tolerance 1/2 ø Tolerance ± 0.0 mm 1 Delivery time: from stock simply cut 8 days; machined days ollow shaft 7,; ; 11 Female thread, axial Male thread Keyway iglidur J against particular shaft materials iglidur J against particular shaft materials iglidur J against particular shaft materials Groove recess Weight Costs Chemical charge Flats + - Aluminium, hard anodised Steel, Steel, chromed drawn + - Aluminium, hard anodised Steel, Steel, chromed drawn + - Aluminium, hard anodised Steel, Steel, chromed drawn Female thread, radial Special machining All can be individually machined. Please send us your drawing. We can then provide a quotation quickly. Inquiries can be put online as well: iglidur J against particular shaft materials iglidur J against particular shaft materials iglidur J against particular shaft materials Query form Page 2 Online tools and more information D-CAD files, prices and delivery time online 4

Product range Precision aluminium Product range Supported aluminium Options Options A W M P - 0-00 A W M U - - 00 Aluminium shaft Metric AWMR AWMP AWMU Precise Aluminium shaft Metric Supported igus

3 Product range Precision aluminium Product range Supported aluminium Options Options A W M P A W M U Aluminium shaft Metric AWMR AWMP AWMU Precise Aluminium shaft Metric Supported igus recommendation: linear bearings equipped with iglidur 7 liners for AWMP: up to Ø mm hollow shaft from Ø mm Material: N AW 01/00 D max times longer service life AWMR: Tube Straightness: DIN 1 ardness: ød1 Material: N AW 01/00 Straightness: N 4- ardness: ard anodised surfaces Page 874 Surface: hard anodised ardness: up to V ole pitches symmetrical C = C max V C T1 C Surface: hard anodised ardness: up to V Imperial dimensions upon request ard anodised surfaces Page 874 Part No. Design Outer- Tolerance Insulation Inner- Max. Weight Ø thickness Ø length [kg/m] AWMP-0 AWMP-08 AWMP- AWMP- AWMR- AWMP- AWMR- AWMP- AWMR- AWMP- AWMR- AWMP- AWMPV- AWMP- AWMPV- AWMP- AWMP-0 Tube Tube Tube Tube ollow shaft ollow shaft ollow shaft ollow shaft 8 0 h9 h AWMP--0: Precision aluminium shaft Ø mm, 0 mm in length Part No. D V d1 (º) T1 C/C Max. Weight ly lz Wby Wbz 0.1 ±0. ±0. Min. Max. length [kg/m] [mm 4 ] [mm 4 ] [mm 2 ] [mm 2 ] AWMU- AWMU- AWMU ,00,000 7,00 19,700 9,0 8,0 1, 1,778 2, 1,091 1,844, AWMU- AWMU ,800 14,700,8,,900 28,700,7,049 AWMU- 8) , 74,800,48 19,0 8) The tolerance for the shaft diameter D amounts 0,1 AWMU--0: Supported aluminium shaft Ø mm, 0 mm in length 44 Online tools and more information D-CAD files, prices and delivery time online 4

Product range Standard steel Product range Supported standard steel shaft Options S W M - 0-00 SWUM 14 D M SWUMN SWM SWM-0 SWM-08 SWM- SWM- SWM- SWM- SWM- SWM- SWM- SWM- SWUMN SWUM igus

1), /ground Cf steel (1.1 V), hard-chromed steel 1.1 Part No. d Weight Max. Steel shaft Metric ffective hardness depth [kg/m] length (at 1.1) 0 0.2 0.8 08 0.9 0.9 0.17 0.9 0.888 1.0 1.8 1.2 2.4 1..8 1.8.49 2.

4 Product range Standard steel Product range Supported standard steel shaft Options S W M SWUM 14 D M SWUMN SWM SWM-0 SWM-08 SWM- SWM- SWM- SWM- SWM- SWM- SWM- SWM- SWUMN SWUM igus recommendation: linear bearings equipped with iglidur 7 liners for 8 times longer service life Completely supported and mounted with standard aluminium support Available shaft materials: Cf steel (1.1), /ground Cf steel (1.1 V), hard-chromed steel 1.1 Part No. d Weight Max. Steel shaft Metric ffective hardness depth [kg/m] length (at 1.1) For supported : Partial shaft support supplied in lengths of 00 mm max. Standard pitch T2, T1 also possible upon request ole pitches symmetrical C = C N2 ød1 C T1/T2 C SWUM- SWUM- SWUM- SWUM- SWUM- SWUM- SWUM- N1 ( ) V supported steel 1.1 Part No. D V N1 N2 d1 M (º) T1 87) C/C T2 C/C Weight ±0.02 ±0.1 min. Max. Min. max. for T1 Standard for T2 Standard [kg/m] ) T1 pitch upon request; standard is T2 hard-chromed steel 1.1 Part No. d Weight Max. ffective hardness depth [kg/m] length (at 1.1) SWM-0 SWM-08 SWM- SWM- SWM- SWM- SWM- SWM- SWM- SWM SWM--0: Steel shaft mm Ø 1.1, 0 mm in length supported steel 1.1 Part No. d 1 A A1 A2 d1 d2 T C/C Weight ±0.02 ±0.02 Min. Max. [kg/m] SWUMN- SWUMN- SWUMN- SWUMN- SWUMN- SWUMN- SWUMN M4 M M M8 M M M Low level supported are delivered unmounted. SWUM--0: Supported steel shaft mm ø made from 1.1, 0 mm length 4 Online tools and more information D-CAD files, prices and delivery time online 47

5 Product range Stainless steel Product range Materials 1.41, 1.4, 1.41, 1.41 Options W M WM WM WMR Steel shaft Metric igus recommendation: linear bearings equipped with iglidur 7 liners for 8 times longer service life Completely supported and mounted with standard aluminium support For supported : Shaft support supplied in lengths of 00 mm max. Standard pitch T2, T1 also possible upon request ole pitches symmetrical C = C stainless steel 1.41 Part No. d Weight Max. ffective hardness depth [kg/m] length (at 1.41) WM-0 WM-08 WM- WM- WM- WM- WM- WM- WM- WM Available shaft materials 1.41,/ground WM 1.4, /ground WM 1.41, extracted WMR 1.41, extracted WMS stainless steel 1.4 Part No. d Weight Max. ffective hardness depth [kg/m] length (at 1.4) WM-0 WM-08 WM- WM- WM- WM- WM- WM- WM- WM stainless steel 1.41 (WMR) or 1.41 soft stainless steel (WMS) Part No. d Weight Max. [kg/m] length WMR- WMS- WMR- WMR- WMR- WMS- WMR- WMR WM--0: Stainless steel shaft mm Ø 1.41, 0 mm in length 48 Online tools and more information D-CAD files, prices and delivery time online 49

Product range Supported stainless steel Product range Low level supported stainless steel 14 D M Options W U M N - - 00 - T1 WUM N2 ød1 N1 ( ) V WUMN Low level supported stainless steel shaft, metric

standard supports made from aluminium C T1/T2 C WUM: Supported stainless steel shaft WUMN: Low level supported stainless steel shaft Available materials and : 1.41 (AISI 4), max.

1 for T1 Standard for T2 Standard [kg/m] WUM- WUM- 4 2 8.0 9..0.0 4...8 29 1 1 79 1. 2.4 WUM- 2 2 11.0. 8. 7 1.97 WUM- 14.0 8..8 1 79 0. WUM- WUM- WUM- 7 84 0 7 8 9 1. 11.0 1. 1.0 1. 11.0 1 4 1 1 0 0 0 0 0 9 9 7.

6 Product range Supported stainless steel Product range Low level supported stainless steel 14 D M Options W U M N T1 WUM N2 ød1 N1 ( ) V WUMN Low level supported stainless steel shaft, metric ole pattern igus recommendation: linear bearings equipped with iglidur 7 liners for 8 times longer service life Shaft support blocks for Ø mm made from stainless steel VA Connecting dimensions as standard supports made from aluminium C T1/T2 C WUM: Supported stainless steel shaft WUMN: Low level supported stainless steel shaft Available materials and : 1.41 (AISI 4), max..000 mm ole pattern: T2: T2 pitch (standard) T1: T1 pitch (upon request) supported stainless steel 1.41 Part No. D V N1 N2 d1 M (º) T1 87) C/C T2 C/C Weight Min. Max. Min. Max. ±0.02 ±0.1 for T1 Standard for T2 Standard [kg/m] WUM- WUM WUM WUM WUM- WUM- WUM ) T1 pitch upon request; standard is T2 low level supported stainless steel 1.41 Part No. d 1 A A1 A2 d1 d2 T C/C Weight ±0.02 ±0.02 Min. Max. [kg/m] WUMN- WUMN- WUMN- WUMN- WUMN- WUMN- WUMN M4 M M M8 M M M Low level supported are delivered unmounted. WUM--0-T1: Supported stainless steel shaft (1.41), outer-ø mm, 0 mm length, T1 pitch WUMN--0: Low level supported stainless steel shaft (1.41), outer-ø mm, 0 mm length Online tools and more information D-CAD files, prices and delivery time online 1

Product range Partially supported stainless steel Product range D F Options Ød1 V W U M S - S - - 00 - T1 WUM-S/ WUMS-S (ϒ) Partially supported stainless steel shaft, metric Material ole pattern igus

7 Product range Partially supported stainless steel Product range D F Options Ød1 V W U M S - S T1 WUM-S/ WUMS-S (ϒ) Partially supported stainless steel shaft, metric Material ole pattern igus recommendation: linear bearings equipped with iglidur 7 liners for 8 times longer service life Shaft support blocks for Ø mm made from stainless steel VA Connecting dimensions as standard supports made from aluminium C G T1/T2 C Available materials and lengths: 1.41 (AISI 4), max..000 mm WUM 1.41 (AISI T1), max..000 mm WUMS Options: blank: 1.41 material S: 1.41 material ole pattern: T2: T2 pitch (standard) T1: T1 pitch partially supported stainless steel 1.41 Part No. D V d1 ϒ F G T1 C/C T2 C/C h ±0.02 for T1 Standard for T2 Min. Max. Min. Max. WUM-S- WUM-S- WUM-S- WUM-S- WUM-S- WUM-S T2 pitch = standard, T1 upon request partially supported stainless steel 1.41 Part No. D V d1 ϒ F G T1 C/C T2 C/C h ±0.02 for T1 Standard for T2 Min. Max. Min. Max. WUMS-S- WUMS-S- WUMS-S- WUMS-S- WUMS-S- WUMS-S T2 pitch = standard, T1 upon request WUM-S--0: Partially supported stainless steel shaft, 1.41 material, T2 pitch (standard), outer-ø mm, 0 mm length WUMS-S--0-T1: Partially supported stainless steel shaft, 1.41 material, T1 pitch, outer-ø mm, 0 mm length 2 Online tools and more information D-CAD files, prices and delivery time online

8 Product range Carbon fibre shaft Product range Shaft end supports, floating Options C W M T A - 08 CWM Carbon fibre shaft Metric d 2 Shaft end support, floating Inner Ø Material: Roundness tolerance: Diameter tolerance: CFK Composite ± 0.0 mm -0.1 mm R A øs Material: aluminium Threaded fixing hole Application temperature: Max. +80 C Colour: lack Part No. Design Diameter Max. Weight 0.1 length [g] CWM- CWM- CWM- CWM- ollow shaft ollow shaft ollow shaft ollow shaft /9 /. / /2 2,000 mm 2,000 mm 2,000 mm 2,000 mm CWM--0: Carbon fibre shaft, outer-ø mm, 0 mm length Part No. d A 2 ø S R Weight ±0.01 [g] TA-08 TA- TA- TA- TA- TA- TA- TA M M M M8 M M M M ,000 TA-: Floating shaft end support with inner-ø mm 4 Online tools and more information D-CAD files, prices and delivery time online

Product range Product range Shaft end supports, fixed Shaft end blocks, standard version T A F - 08 W A - 08 d S S2 SW 2 Shaft end support Fixed Inner Ø Shaft end block Standard version Inner Ø

9 Product range Product range Shaft end supports, fixed Shaft end blocks, standard version T A F - 08 W A - 08 d S S2 SW 2 Shaft end support Fixed Inner Ø Shaft end block Standard version Inner Ø Material: aluminium Plain fixing hole Material: aluminium R A øs 1 S1 d N1 N2 L Part No. d A 2 ø S R Weight Part No. d 1 L S1 S2 S N1 N2 SW Weight ±0.01 [g] ±0.02 ±0.1 [g] TAF WA M TAF WA- 4 M TAF WA- 24 M TAF WA- 0 M TAF WA M TAF WA M TAF WA M TAF ,1 WA M ,0 WA M ,9 TAF-: Fixed shaft end support with inner Ø mm WA-08: Shaft end block, standard design with inner Ø 8 mm Online tools and more information D-CAD files, prices and delivery time online

Product range Product range Shaft end blocks, compact design Shaft end blocks, narrow version W A C - 0 W A S - 08 Shaft end block Compact version Inner Ø Shaft end block

d 1 A A1 S V SW Weight from +0.01 ±0.1 [g] ±0.02 [g] to +0.02 WAS-08 8 27 1 2 4..0 2. WAC-0 27 1 2 M 4.2 8 11 1 2. WAS- 2...0 2 WAC-08 8 27 2 M 4.2 8 11 1 2. WAS- 2...0 WAC- 18 18 M.

8 11 9 18 4.0 1 WAC- 28 4 1 2 M 8. 1 44 2.0 170 WAC- 0 4 7 M 8. 1 49 29.0 2 WAC- 7 87 M. 18 2 8.0 480 WAC- 92 M 14. 80 4 4 8.

10 Product range Product range Shaft end blocks, compact design Shaft end blocks, narrow version W A C - 0 W A S - 08 Shaft end block Compact version Inner Ø Shaft end block Narrow version Inner Ø Material: aluminium Material: aluminium S S2 SW A1 d SW 1 S1 d N1 N2 L S V 1 A Part No. d 1 L S1 S2 S N1 N2 SW Weight Part No. d 1 A A1 S V SW Weight from ±0.1 [g] ±0.02 [g] to WAS WAC M WAS WAC M WAS WAC M WAS WAC M WAS WAC M WAS WAC- 8 4 M WAS WAC M WAC M WAC M WAC M WAC- 92 M WAC-: Shaft end block, compact design with inner Ø mm WAS-: Shaft end block, narrow design with inner Ø mm 8 Online tools and more information D-CAD files, prices and delivery time online 9

Product range Flanged shaft end block ød2 ød W A F - Shaft end block With flange Inner Ø xpert 2.

bearings constantly expanded by new sizes and products asily calculate the service life of your required linear guide and

Select the bearing size, carriage, number and position. Then enter the distance between the rails and the mounting.

V L Material: aluminium www.igus.de/drylin-expert øs Download the online tools App SW A Part No.

1 19 0 Aluminium in combination with iglidur J enable high speeds due to the lightweight.

11 Product range Flanged shaft end block ød2 ød W A F - Shaft end block With flange Inner Ø xpert 2.0 Online tools xpert for linear guides: System selection & service life calculation with CAD Configure and calculate linear bearings constantly expanded by new sizes and products asily calculate the service life of your required linear guide and configure with a few clicks. Select a system and add the relevant environmental parameters. Select the bearing size, carriage, number and position. Then enter the distance between the rails and the mounting. Define more relevant parameter of the guidance and select a rail length. The results are displayed. V L Material: aluminium øs Download the online tools App SW A Part No. Ø d A L Ø d2 Ø s V SW Weight [g] WAF- 2. ± WAF- WAF- WAF- WAF- 27. ± ± ± ± Aluminium in combination with iglidur J enable high speeds due to the lightweight. Stainless steel combined with iglidur X, offer maximum resistance at +1 C. Cleaning in filling machine. WAF-.0 8 ± WAF-.0 ± ,0 WAF-: Flanged shaft end block with inner Ø mm Stainless steel combined with iglidur J in cut-off grinding machine. Grinding particles and coolants, extreme conditions. Cost-effective guide for work piece carriage in a machine tool through supported aluminium shaft. 0 Online tools and more information D-CAD files, prices and delivery time online 1

12 Fax-Reply to Send an to or online Date: Phone: Fax: From: Phone: Fax: To: igus Gmb Technical marketing department P.O. ox Cologne, Germany Lower costs in 4 seconds? Simply fill in, send off, save! Step 1: Please choose the required shaft material AWMP SWM WM WMR Aluminium, hard anodised Cf steel (1.1), Stainless steel (1.4), Stainless steel (1.41), drawn SWM WM WMS Cf steel (1.1 V), hard-chromed Step 2: Please choose the required version Stainless steel (1.41), Stainless steel (1.41), drawn Standard design Low level supported Standard supported Step : Please enter the required dimensions Outer-Ø [mm] Length (mm) Step 4: Please draw a sketch of the required machining Chamfer one side both sides 2 Key surface one side both sides Trunion one side both sides Groove recesses axial Quantitiy Male threads, axial one side both sides Female threads, axial one side both sides Female thread, radial Quantity 7 Other surfacing one side both sides

drylin shafts drylin Shafts

drylin shafts drylin Shafts Shafts 7 shaft materials to choose All also in supported versions Aluminium for low weight Stainless steel for high corrosion resistance Special machining Available from stock Diameters 6 50 mm 845 Shafts