drylin W hybrid bearings

Size: px

Start display at page:

Download "drylin W hybrid bearings"

Angelina Daniel
5 years ago
Views:

1 Roll and slide Single or double roller Low driving forces For manual adjustment Dry operation Single and complete carriages Quiet operation 817

Advantages Hybrid from the linear construction kit rail made from hard-anodised aluminium Robust zinc

aluminium carriage with drylin fitted Liners made from high-performance polymer iglidur J Can be combined

lubricant free combination of plain and roller.

lateral forces. This makes drylin ideal for manual adjustments in door applications (e.g.

The efficient design using plastics with zinc die-casting also cuts costs.

Cost effective Typical application areas: Machine doors Safety doors Control panels etc.

rollers iglidur J sliding bearing with plastic support roller Can be combined with single and double rails

available as a short, compact carriage for variable multi-carriage solution page 824 WH Complete carriage

slider page 825 Easy to move thanks to the combination of rolling and gliding if product design award 2012

2 Advantages Hybrid from the linear construction kit rail made from hard-anodised aluminium Robust zinc die-casting housing with single or double plastic rollers Lubricant free and quiet operation Compact aluminium carriage with drylin fitted Liners made from high-performance polymer iglidur J Can be combined with 11 linear profile rails Combined sliding and rolling for low driving forces drylin offer a unique lubricant free combination of plain and roller. The integrated rollers achieve low driving forces, while the sliding effect simultaneously protect against lateral forces. This makes drylin ideal for manual adjustments in door applications (e.g. machine doors, safety doors), but also in mobile control panels. The efficient design using plastics with zinc die-casting also cuts costs. Hybrid can be used on various hard-anodised aluminium profiles from the linear construction kit. Smooth operation Low-profile Offset and abuse forces are easily absorbed by sliding elements Location on rail ensures reliability Matching guide rails made from hard anodised aluminium Low driving force required Cost effective Typical application areas: Machine doors Safety doors Control panels etc. Product overview Sliding instead of rolling JRM Single bearing housing with single or double plastic rollers iglidur J sliding bearing with plastic support roller Can be combined with single and double rails page 822 WR Complete carriage for lateral adjustments Guidance via a double rail without support Also available as a short, compact carriage for variable multi-carriage solution page 824 WH Complete carriage with 4 integrated For horizontal installation Available in 2 installation sizes, also suitable as a camera slider page 825 Easy to move thanks to the combination of rolling and gliding if product design award 2012 drylin carriages Suitable rail profiles from page 785 Available as a single or double shaft profile Tightening torque for drylin connections between metal parts page 778 Available from stock Detailed information about delivery time online 818 Lifetime calculation, configuration and more 819

Application examples Technical data type 01 The from the WJRM-01-.

The bearing housing is available in 3 installation sizes and can be used with single or double shaft

The bearing should be installed so that the bearing load is applied in the roll direction.

.. type series are each equipped with two bearing-supported plastic rollers at an angle of 70 or 80.

The double roller offer a higher load capacity than with a vertical bearing load on the installation

The low coefficient of roll friction is still maintained with load directions that slightly deviate from

drylin linear on the hard-anodised guide shaft to guide the doors of machine tools.

Camera stand with JRM for far smoother running.

position WJRM-01-... Installation position WJRM-21-.

3 Application examples Technical data type 01 The from the WJRM type series are each equipped with a bearing-supported plastic roller. The bearing housing is available in 3 installation sizes and can be used with single or double shaft rails in two installation positions. The bearing should be installed so that the bearing load is applied in the roll direction. Other load directions are possible but create greater displacement forces. type 21 The in the WJRM type series are each equipped with two bearing-supported plastic rollers at an angle of 70 or 80. Available in 3 sizes, they can be combined with single and double shaft rails. The double roller offer a higher load capacity than with a vertical bearing load on the installation area (y-direction). The low coefficient of roll friction is still maintained with load directions that slightly deviate from this. The smooth, low noise operation and the enormous cost advantages are obtained by the use of the drylin linear on the hard-anodised guide shaft to guide the doors of machine tools. Forces absorbed by bearing Forces absorbed by double roller bearing Adjustment of control panel unit Camera stand with JRM for far smoother running. Vertical movements are now also possible Installation position 01 Installation position 02 Installation position WJRM Installation position WJRM The new carriage with "door opener" function in combination with drylin W profile guide systems offer optimum opportunities to construct dollies and sliders. Service life (km) Load in y-direction (N) Load in y-direction (N) WJRM WJRM WJRM WJRM WJRM WJRM Service life (km) Lifetime calculation, configuration and more 821

Product range Hybrid with a bearing-supported plastic roller Product range Hybrid double with angled plastic rollers Type Type WJRM-01-10 WJRM-21-20 Hybrid bearing With one roller 10 Hybrid bearing

4 Product range Hybrid with a bearing-supported plastic roller Product range Hybrid double with angled plastic rollers Type Type WJRM WJRM Hybrid bearing With one roller 10 Hybrid bearing With two rollers C1 C3 A3 G1 K3 A1 H B2 K2 B Q2 Q1 Installation position 01 Installation position 02 Installation position 02 in installation size ø 10 when using a WJRM bearing Technical data and dimensions [mm] Stat. load capacity Co Dyn. load capacity Cz+ F v at total running distance (km) max. Technical data and dimensions [mm] WJRM ) WJRM WJRM WJRM ) WJRM WJRM Stat. load capacity Co Dyn. load capacity Cz+ at total running distance (km) F v max. [N] [N] [N] [N] [N m/s] Coefficient of Weight A1 A3 B B2 C1 C3 G1 H K2 for K3 for Q1 Q2 friction in thread Screw z-direction [g] [µ] < M6 M5 < M < M ) Deviating from WJRM-02-10, available with an expanded opening angle for installation position 02 [N] [N] [N] [N] [N m/s] WJRM WJRM WJRM Coefficient of Weight A1 A B C C3 G1 H K2 for friction in Screw z-direction [g] [µ] WJRM WJRM WJRM < 0.1 < 0.1 < M6 WJRM and WJRM-21-16: 70 angle between the rollers / WJRM-21-20: 80 angle between the rollers Order example: WJRM-01-10: -Hybrid bearing WJRM-21-20: double roller bearing WS-... WS-..-ES-FG-... WS-... WS-...-ES-FG WSX-... WS-... WS-..-ES-FG-... WS-... WS-...-ES-FG WSX Lifetime calculation, configuration and more 823

Product range Hybrid carriages single & double roller for lateral installation Product range Hybrid carriages with 4 for horizontal installation Type Dimensions Option Type Dimensions WWR-21-80 -

C2 C H2 Load data and dimensions [mm] A C A2 C2 K2 H2 A3 H3 sxmin sxmax symin symax Width Length ±0.

carriage as a "door opener" with 2 single roller and 2 double roller Dimensions [mm] Weight A C A2 C2 K2 H2 Static load capacity Coy Coz Mox Moy Moz [kg] ±0.

5 Product range Hybrid carriages single & double roller for lateral installation Product range Hybrid carriages with 4 for horizontal installation Type Dimensions Option Type Dimensions WWR WWH Hybrid carriage Compact Hybrid carriage Length of carriage [mm] Options 01: Carriage, short version 15: Complete carriage, long version H3 wx K2 K2 A2 A A2 A C2 C A3 H2 sx Fs sy Fs C2 C H2 Load data and dimensions [mm] A C A2 C2 K2 H2 A3 H3 sxmin sxmax symin symax Width Length ±0.17 WWR WWR wx/ wx/ Order example: WWH : Assembled carriage with 4 single roller WWR : Assembled single carriage as a "door opener" with 2 single roller and 2 double roller Dimensions [mm] Weight A C A2 C2 K2 H2 Static load capacity Coy Coz Mox Moy Moz [kg] ±0.17 [N] [N] [Nm] [Nm] [Nm] WWH WWH WWH M5 M ,000 1,600 3,360 1,000 1,600 3, WS WS-...-ES-FG WSX-... WS-... WS-...-ES-FG WSX Lifetime calculation, configuration and more 825

6 826

DryLin W Guiding system

DryLin W Guiding system Introduction Your choice of length and width DryLin W is a low cost linear guiding system that was developed to provide both design flexibility and quick assembly in both single