Linear technology.....plastics

Transcription

1 dr ylin... Linear technology.....plastics

2 Application examples: drylin Improve technology... Reduce cost. For years the igus motto has been "plastics for longer life ". y this we mean the production of innovative plastic products which reduce maintenance work, achieve technical improvements, at the same time as reducing costs and increasing service life, everything delivered immediately from stock. Our references from the practise show the proven employment from drylin linear guide in a wide variety of applications. LAEL FEEDING SYSTEM (Packaging technology) Quick and flexible format adjustment with absolute freedom from lubrication at lower costs - implemented with the drylin T linear guide system. Further advantage: Guide carriage with manual clamping. (Geset Etikettier-Systeme Gmb) CAMPAGNE-OTTLE SEALING MACINE Due to freedom from lubricants and chemical resistance, drylin guides score highly in facilities in the food sector. (Sick International Kellereimaschinen Gmb) FORMING, FILLING AND SEALING MACINE Lubrication-free drylin high temperature bearings (up to +1 C) are used in the tool guide system of this forming, filling and sealing machine. (Unifill SpA, Italy) DOOR ADJUSTMENT The smooth, low noise operation and the enormous cost advantages are obtained by the use of the drylin R linear plain bearings on the hard-anodised guide shafts to guide the doors of machine tools. (Alzmetall Gmb + Co. KG) SYSTEMS FOR TE PRODUCTION OF ALUMINIUM CARTRIDGES The absolute freedom from lubricants and the resistance to prevailing paint mist led to the application of drylin R linear plain bearings. (Mall + erlan Gmb) 3D-PRINTER Linear guides of the drylin T and N series, and the drylin SD lead screw units travel completely lubrication-free. This eliminates the risk of contaminating the housing, the filament, and the print result. (Cobot) MOILE AND STATIONARY SAW MILLS drylin W modular linear guide system and iglidur J liner for adjusting the saw blade guide. (Serra Engineering Gmb) 860 Online tools and more information online Other exciting applications 861

3 drylin linear technology Product overview drylin W profile guides drylin W profile guides New Liners made from Single rails and Reduced weight: Fast assembly: Manual clearance With spring pretension Corrosion-resistant Double rails: dry-tech polymers housing bearings: ousing bearing made Tandem housing adjustment: "Turn-To-Fit" stainless steel version Square/round Square/Round from aluminium bearing housing bearing single/double rails Page 888 Page 890/892 Page 893 Page 894 Page 896 Page 897 Page 898 Page 900/904 drylin W profile guides drylin W profile guides igh strength: Complete Easy assembling, Carriage for Reduced weight: Wear-resistant: Accessories: Accessories: igh profile rails carriage: Alignment no necessary: curved rail Double rail Slider rails Manual clamp for simple Manual clamp for higher Square/round Mono-slide-carriage positioning forces Page 901/905 Page 902/906 Page903 Page 907 Page 908 Page 909 Page 910/911 Page 911 drylin W hybrid bearings drylin W hybrid bearings ybrid bearing, ybrid double roller ybrid single and double ybrid carriage for ybrid carriage with four Carriage with four double Manual clamp for hybrid ybrid carriage for with one plastic roller bearing, with two angled roller bearing made from lateral installation double roller bearings roller bearings bearing horizontal installation plastic rollers stainless steel Page 9 Page 921 Page 922 Page 923 Page 924 Page 9 Page 910 Page 926 drylin N low-profile guide drylin N low-profile guide Smallest dimension for The largest variety Suitable for aluminium igh loads with Telescopic rails Telescopic rails with Accessories: Accessories: high loads: of carriages (options): construction profiles: reduced space: locking mechanism Manual clamp End caps Page 934 Page 936 Page 938 Page 9 Page 942 Page 943 Page 944 Page 945 drylin T rail guide drylin T rail guide Manual adjustable With manual Automatic clearance eavy-duty- eavy-duty with Compact Accessories: Accessories: clearance: clamp adjustment version: clearance adjustment construction: Compact Massive Manual clamp Manual clamp Page 955 Page 956 Page 957 Page 958 Page 959 Page 960 Page 961 Page Online tools and more information 3D-CAD files, prices and delivery time online 863

4 drylin linear technology Product overview drylin T rail guide drylin R liners Miniature - Adjustable Accessories: Accessories: Closed, long design for Open, long design, for Closed, long design, Open, long design, guide: miniature guide End caps for holes Replacement liners round shafts made from supported shafts made precise made from precise made from 04 iglidur J from iglidur J iglidur J iglidur J Page 962 Page 963 Page 964 Page 964 Page 982 Page 983 Page 984 Page 985 drylin R liners drylin R liners New New Closed, short design for Closed, long design for Open, long design Closed, long design for Open, long design for Closed, short design for Closed, long design, high Open, long design, high round shafts made from round shafts made from for round shafts made round shafts made from supported shafts made round shafts made from temperature made from temperature made from iglidur J iglidur J0 from iglidur J0 iglidur E7 from iglidur E7 iglidur E7 iglidur X iglidur X Page 986 Page 987 Page 988 Page 989 Page 990 Page 991 Page 992 Page 993 drylin R liners drylin R solid polymer bearings Closed, short design, high Slide disks for large force Clip-in Press-fit bearings Standard design Standard design, Japanese dimensions Low-cost temperature made from displacement liners made from iglidur L100 made from iglidur J precise made from made from iglidur J4 made from iglidur J260 iglidur X iglidur J Page 994 Page 996 Page 997 Page 998/999 Page 1000 Page 1001 Page 1002 Page 1003 drylin R linear plain bearings drylin R linear plain bearings Closed aluminium Closed aluminium Closed stainless steel Closed alu mi ni um Closed Split aluminium Split aluminium adapter Open aluminium- adapter adapter, precise adapter made from adapter, short design alu minium adapter (floating adapter (floating bearing) adapter, for supported 1.45 bearing) shafts Page 1004 Page 1005 Page 1006 Page 1007 Page 1008 Page 1009 Page 1010 Page 1011 drylin R pillow blocks drylin R pillow blocks Open aluminium -adapter, Closed alu minium Adjustable aluminium Split aluminium housing, Closed Closed Closed Closed aluminium floating bearing housing, short design housing, short design screwed, short design aluminium housing, aluminium housing, alu mi nium housing, floating pillow block tan dem design long design with manual clamp Page 1012 Page 1014 Page 1015 Page 1016 Page 1017 Page 1018 Page 1019 Page Online tools and more information 3D-CAD files, prices and delivery time online 865

5 drylin linear technology Product overview drylin R pillow blocks drylin R flange bearings Open aluminium Open aluminium Open aluminium Adjustable open Closed Closed Closed aluminium adapter, Closed aluminium adapter, pillow block housing, long design housing with manual aluminium housing, alu minium adapter, alu minium adapter, round flange, tandem square flange, tandem clamp long design round flange square flange design design Page 1021 Page 1022 Page 1023 Page 1022/1024 Page 1026 Page 1027 Page 1028 Page 1029 drylin R pillow blocks drylin R pillow blocks Quad block, Quad block, Closed tandem Open tandem Long, closed Long, open Closed, short Short, open closed design open design design design design design design design Page 10 Page 1031 Page 1032 Page 1033 Page 1032 Page 1035 Page 1036 Page 1037 drylin R shafts drylin R shafts Precision aluminium Supported aluminium Standard steel Supported Stainless steel Supported stainless Low level supported Partially supported shafts shafts shafts steel shafts shafts steel shafts stainless steel shafts stainless steel shafts Page 1044 Page 1045 Page 1046 Page 1047 Page 1048 Page 1050 Page 1051 Page 1052 drylin R shafts drylin R shafts Carbon fibre shaft Shaft end support, Shaft end support, Shaft end block, Shaft end block, Shaft end block, Flanged shaft floating fixed standard version compact version narrow version end block Page 1054 Page 1055 Page 1056 Page 1057 Page 1058 Page 1059 Page 1060 drylin Q square linear guides drylin Q square linear guides Square section rail Adjustable linear Adjustable linear ousing bearings Flange bearings Solid plastic- Accessories carriage carriage, with linear bearings for drylin Q manual clamp Page 1066 Page 1067 Page 1068 Page 1069 Page 1070 Page 1071 Page Online tools and more information 3D-CAD files, prices and delivery time online 867

6 drylin linear technology Product overview drylin linear technology drylin digital measuring drylin digital measuring Integrated measuring system for drylin Q Page 1078 Ready-to-install measuring system for drylin SLW linear modules Page 1074 Digital measuring system for drylin W Page 1080 Measuring system with freely positionable display for drylin W Page 1081 Measuring system for external data output for drylin W Page 1082 drylin carbon fibre drylin carbon fibre Extremely lightweight linear guide Non-metallic toothed belt axis Linear module with high profile carbon fibre Linear module with carbon fibre hollow shafts Carbon fibrehollow shaft Page 1086 Page 1087 Page 1088 Page 1089 Page 1090 drylin stainless steel drylin stainless steel Closed stainless steel adapter made of 1.45 Page 1093 Corrosion-resistant stainless steel version single or double rails Page 1094/1095 ybrid single and double roller bearing made from stainless steel Page 1097 Stainless steel shafts Page 1098 Supported stainless steel shafts Page 1100 Low level supported stainless steel shafts Page 1101 Partially supported stainless steel shafts Page 1102 Linear module stainless steel version Page 1105 drylin stainless steel Linear module "ygienic Design" Page 1104 XY-table stainless steel version Page Online tools and more information 3D-CAD files, prices and delivery time online 869

7 drylin linear technology Advantages drylin linear technology Product overview Superior operating properties by combining iglidur bearing elements and anodised rails with round shaft profiles Corrosion resistant Quiet operation Profiles available in various geometries, installation sizes and clearances Clean with no lubricants required Lightweight due to the use of plastics and aluminium Maintenance free due to integrated lubricants Smooth operation with iglidur sliding elements Lubrication-free drylin linear guide drylin is a product range of lubrication free linear plain bearings based on the principle of sliding instead of rolling. Tribologically optimised iglidur high performance polymers are used as sliding surfaces. The drylin linear run dry and are maintenance-free. Linear guide with rails or round shafts are available. The main benefits in addition to zero maintenance and lubrication are strength and resistance to external influences such as dirt, moisture, chemicals, heat and impact. Lubrication-free and resistant to dust and dirt igh static load capacity Light, quiet and clean Robust and cost-effective Typical application areas Mechanical engineering Wood working industry Medical- and rehabilitation technologies Interior design (furniture/aircraft) Automation Available from stock Detailed information about delivery time online. lock pricing online No minimum order value. From batch size 1. Service life calculation drylin rail guide drylin W profile guides Complex with 14 different profiles and more than 50 carriage options Versatile Easy installation From page 881 drylin N low profile guides Low profile installation heights from 6 to 12 mm Lightweight Many carriage options also with preload From page 927 drylin T rail guide Same dimensions as ball guide Adjustable bearing clearance Automatic clearance adjustment igh static load capacity From page 947 drylin shaft guides drylin R round shaft guides Same dimensions as standard ball bearings For all shaft materials Lightweight Interchangeable liners From page 973 drylin Q square linear guides Maintenance-free, torque resistant square linear guides Lightweight profiles made from hard-anodised aluminium Manual adjustable carriages with/without manual clamp Numerous fastening options From page 1063 Measuring From page 1073 Special solutions with carbon fibre and stainless steel From page Online tools and more information 3D-CAD files, prices and delivery time online 871

8 drylin linear technology Slides instead of rolling! drylin linear technology Slides instead of rolling! drylin is a range of maintenance and lubrication free linear bearings. This range includes linear modules with lead screw, gear rack and belt drives. The main benefits in addition to zero maintenance and lubrication are strength and resistance to external influences such as dirt, moisture, chemicals, heat and impact. d all bearings d drylin Quiet operation The quiet operation is also a benefit of sliding rather than rolling. There are no loud collisions between a hard steel ball and the shaft or rail. The sliding motion is extremely quiet and only a light friction noise is audible. Speed Speed Figure 01: Comparison of noise development Maximum stroke lengths The line up of guide rails (joining) poses no challenge for drylin linear guides. The guide rails are slightly chamfered, Maintenance-free Dry running aligned and simply placed behind each other. The groove Wear-resistant Suited for short-stroke applications resulting from the joint can be passed over by the sliding Resistant to impacts and vibrations igh static load capacity element without problems. With the drylin linear plain Corrosion resistant igh speeds and accelerations possible bearings, a ball or roller cannot get stuck. In this way Resistant to dirt, dust and humidity Self-lubricating stroke lengths of more than meters can be implemented. Low coefficients of friction Extremely quiet operation Assembly is simplified by the distinctive joint marking Weight reduction Low magnetism Track joint provided at the factory. Optimum load distribution drylin linear bearings operate on sliding pads unlike the traditional recirculating ball bearing. This gives a larger contact surface resulting in lower surface pressure. This leads to advantages which include: Permitted speeds/accelerations The use of non-hardened shafts drylin linear plain bearings do without rollers and The use of non metallic shafts balls. This makes the bearing independent of the mass Roller bearings Point contact Scratching and shaft damage is completely excluded inertia of this body and can be used with high speeds up to 10 m/s and accelerations up to 100 G. Shafts and rail materials drylin linear bearings are therefore especially suitable for The large surface area of drylin linear plain bearings, applications with light loads, where the speeds should be when compared to traditional ball bearings, means that increased. The use of hard-anodised aluminium as a friction under a given load the bearing pressure is greatly reduced. partner lowers the operating temperature in the bearing This allows soft shaft materials to be used, including hard due to the high thermal conductivity of aluminium. Thus the anodised aluminium, which in turn gives additional benefits operation can be carried out with a high frequency even at in friction and wear rate values. Also VA stainless steel very short stroke lengths. Plain bearings Surface contact shafts can be used when chemical resistance is required. The maximum average surface speed results from the Of course, standard linear hardened shafts can also be load on the bearings. With decreasing surface load, higher used with drylin linear bearings. speeds can be achieved. More important than the maximum speed reached is the average speed over a period of time, Dry running, without lubrication drylin linear bearing are designed for running dry. As there is no grease or oil present, the application tends to naturally self clean, any particles are wiped away from the sliding surface by the ribbed design of the drylin polymer bearing. This works well even in coarse dirt or even eat conductivity [W / m K] Aluminium 235 Unalloyed steel igh-alloyed steel 15 Table 01: Thermal conductivity because this has the most influence on the heating of the bearing system. In cases with breaks between the individual cycles, the maximum average surface speed is critical, which is achieved during a period of 10 to minutes. sand. Particles are repelled from the contact surface by the Resistant to dirt, dust and moisture - y lubrication free movement itself. ere the front side of the gliders works like Average surface speed insert and dirt channels. a wiper. The contact surface remains clean. = Travel distance per cycle [m] / total cycle time [sec]. 872 Online tools and more information 3D-CAD files, prices and delivery time online 873

9 drylin linear technology Slides instead of rolling! drylin linear technology Materials Corrosion behaviour The low humidity absorption of iglidur J, J0 and X permits even underwater applications. The application of stainless steel or anodised aluminium shafts provide for a corrosionresistant guide system. Anodised aluminium is resistant to chemically neutral substances in the range p 2 to 7. For special applications separate tests are recommended for coated aluminium sample parts for that specific application. The all-rounder iglidur J The specialist iglidur J0 The extreme iglidur X The marathon runner iglidur E7 The FDA-compliant iglidur A180 Application temperature -50 to +90 C -50 to +90 C -100 to +0 C -50 to +70 C -50 to +90 C est coefficient of friction with steel shaft aluminium, hard anodised steel hard chrome-plated steel/stainless steel shaft stainless steel shaft Contact resistance > Ωcm > 10 8 Ωcm < 10 5 Ωcm > 10 9 Ωcm > Ωcm Moisture absorption 1.3 % weight 0.7 % weight 0.5 % weight < 0.1 % weight 0.2 % weight Maximum service life aluminium, hard anodised aluminium, hard anodised hardened stainless steel steel/stainless steel shaft stainless steel shaft Extreme application conditions in the offshore industry Filling machine, Krones AG, Rosenheim The iglidur X material in heavy-duty use under high temperatures in foundries Lubrication-free and resistant to dust and dirt Chemical resistance iglidur J is resistant to weak acids, diluted alkalis as well as to fuels and all kinds of lubricants. The intensive cleaning of machines with standard commercial cleaning agents, even in the food sector, is therefore not a problem for the guides. For applications in environments with aggressive chemicals, the use of the drylin R bearings equipped with iglidur X liners is recommended. The resistance of linear bearing is equally dependent on the shaft or rail material. As an option most resistant to chemicals, a high-alloyed stainless steel is offered, for instance X105 CrMo 17 (1.41), or alternatively the use of soft VA steels (e.g ). Operating temperatures Sliding elements made from iglidur J and J0 can be used in the temperature range between and +90 C. In applications with aluminium shafts and/or rails, distinctly higher loads and speeds can be attained due to the excellent thermal conductivity. Sliding elements made from iglidur X can be used in the range of 100 C to +0 C. Use in dirt Even the application under coarse dirt and sand is possible. Particles are repelled from the contact surface by the movement itself. Seals can be dispensed with due to the dry operation. Dust and dirt cannot stick to grease or oil. ard anodised surfaces ard anodised surfaces are characterised by good wear properties, high chemical resistance and a high degree of hardness. It is a technical and not a decorative surface. Colour alteration and slight cracking may occur, but do not influence the resistance, the corrosion behaviour or the bearing properties. Cutting surfaces and machined surfaces are uncoated. Possible shafts all shaft materials aluminium, hard anodised hardened stainless steel steel/stainless steel shaft all shaft materials Permissible stat. surface pressure 35 MPa 23 MPa 150 MPa 18 MPa 28 MPa Part No. JUM-... J0UM-... XUM-... E7UM-... A180UM-... igus provides various materials for sliding elements and counter partners for linear. Extensive lab tests and years of field experience have shown that iglidur J, J 0 and X are the ideal materials for most linear applications due to their favourable wear and friction properties. Ideal material combinations iglidur J: Maintenance-free, dry operation Low coefficients of friction with all materials Excellent wear resistance Very low humidity absorption More about iglidur J From page 141 iglidur J0: Completely maintenance-free Extremely high service life on hard-anodised aluminium Low coefficients of friction with hard-anodised aluminium Excellent wear resistance with anodised aluminium More about iglidur J0 From page 235 iglidur X: Completely maintenance-free Temperature resistance from -100 C to +0 C in continuous operation Universal resistance to chemicals Very low humidity absorption More about iglidur X From page 245 Other possible materials: iglidur A180, FDA-compliant More about iglidur A180 From page 363 iglidur E7, the endurance runner all-rounder More information about iglidur E7 From page 1494 Coefficient of friction Wear Service life AWM SWM EWM EEWM hv J0 J X AWM SWM EWM EEWM hv J0 J X SWM SWM EWM EEWM EWMS EWMR (1.1213) (1.1213V) (1.1415) (1.34) (1.4571) (1.41) E7 J 874 Online tools and more information 3D-CAD files, prices and delivery time online 875

10 drylin linear technology Product selection drylin linear technology Online tools General properties drylin W 5 drylin N 4 drylin Q 3 drylin T 4 drylin T mini 4 Lubrication-free and quiet operation Same dimensions as ball bearings Profile rails Round shafts Square profiles Single housing bearing Complete carriage ybrid linear bearing Expert for linear guides: System selection & service life calculation with CAD Configure and calculate linear bearings constantly expanded by new sizes and products Easily calculate the service life of your required linear guide and configure with a few clicks. Select a drylin system and add the relevant environmental parameters. Select the bearing size, carriage, number and position. Then enter the distance between the rails and the mounting. Define more relevant parameter of the guidance and select a rail length. The results are displayed. drylin R 12 Special criteria drylin W Loads > 100 kg For robust requirements Resistant to dirt Compact, space saving Particularly light weight Torque resistant Torsionally stable Unsupported installation drylin N drylin Q Download the online tools App drylin T drylin T mini drylin R Technical options drylin W drylin N Manual adjustable bearing clearance Automatic adjustable bearing clearance Automatic preload Floating bearing function Manual clamp With measuring system With lead screw drive With toothed belt drive drylin CAD configurator: Generate complete 3D models for drylin linear technology to your specifications The igus CAD online configurator gives you the ability to design and save your linear guide as a system, individual components directly as a 3D model in all commonly used formats, or to have these sent by free of charge and without registration. drylin Q drylin T drylin T mini drylin R Application areas Stainless steel components Temperatures above 90 C Chemical resistant FDAcompliant Cleanroom and ESD Door/control panel adjustments Camera slider 3D-print components drylin W drylin N drylin Q drylin T drylin T mini drylin R suitable particularly suitable 876 Online tools and more information 3D-CAD files, prices and delivery time online 877

11 drylin linear technology Curved rails and profiles drylin linear technology Design rules drylin curved linear guide profiles Floating bearings for linear slide guides igus provides customised curved rails for the drylin W product range. This is especially for the requirements in operating ergonomics, e.g. guiding monitors and control in a radius to ensure safe and easy accessibility. New standards can be set in design and construction with a drylin curved guide system. Lubrication-free drylin W carriages for curved rails Page 907 Variable profile directions Twist-proof alternative to curved tube profiles ending option depending on the radius, rail length, bearing/carriage and mounting Customised project service ending options ending direction 1 = convex In the case of a system with two rails, one side needs to be fitted with floating bearings. A suitable solution comprising fixed and floating bearings is available for every installation position, whether horizontal, vertical or lateral. This type of assembly prevents jamming and blockage on the guides resulting from discrepancies in parallelism. Floating bearings are created through a controlled extension of play in the direction of the expected parallelism error. This creates an additional degree of freedom on one side. During installation, take care that the floating bearing has approximately the same clearance on both sides. During installation, take care that the floating bearing has approximately the same clearance on both sides. You can see the version of the fixed/floating bearing system recommended by us in the designs shown in the individual sections about the. The mounting surfaces of the rails and carriages should possess a good evenness (e.g. machined surface) to prevent twisting in the system. Smaller areas of mounting surface unevenness can be compensated to a certain extent by the floating bearing. The mounting surfaces of the rails and carriages should possess a good evenness (e.g. machined surface) to prevent twisting in the system. During installation, take care that the floating bearing has approximately the same clearance on both sides. You can see Floating the version of the fixed/floating bearing system recommended by us in the designs shown in the individual sections about the. The mounting surfaces of the rails and carriages should possess a good evenness (e.g. machined surface) to prevent twisting in the system. Smaller areas of mounting surface unevenness can be compensated to a certain extent by the floating bearing. Eccentric forces To ensure successful use of maintenance-free drylin linear bearings, it is necessary to follow certain recommendations: If the distance between the driving force point and the fixed bearings is more than twice the bearing spacing (2:1 rule), a static friction value of 0. can theoretically result in jamming on the guides. This principle applies regardless of the value of the load or drive force. The friction product is always related to the fixed bearings. The greater the distance between the drive and guide bearings, the higher the degree of wear and required drive force. Failure to observe the 2:1 rule during a use of linear slide bearings can result in uneven motion or even system blockage. Such situations can often be remedied with relatively simple modifications. If you have any questions on design and/or assembly, please contact our application engineers. 2x Fixed Curved drylin linear technology - for ergonomic operation and optimal field of view ending direction 2 = concave 1x ending direction 3 = curved bending Figure 02: Automatic compensation of parallelism errors Figure 03: The 2 :1 rule Tightening torque for drylin connections between metal parts Metric thread (Da) ending direction 4 = curved bending Different radii and bending directions available upon request More Information and checklist online Online tools and more information M3 M4 M5 M10 Torque Recommended torque [Nm] [Nm] Please be aware of the minimal screw in depth for aluminium and zinc parts: 1.5 x Da 3D-CAD files, prices and delivery time online 879

12 drylin linear technology Cleanroom and ESD compatibility Clean room suitability and ESD compatibility of drylin drylin linear guides from igus All drylin guide are clearly qualified for clean room applications. The differentiation between the various clean room classes is only dependent on load and speed of the application. The combination of iglidur J and hard anodised aluminium is classified as level 1 in the ESD compatibility according to SEMI E (ighest rank). The following drylin guides from igus were tested: N, W10, T and T. See below for detailed results. Linear guide system drylin TK "For the linear guide system drylin TK by igus Gmb, it is possible, on the calculations of the likelihood of violation of threshold values of the detection sizes 0.2 μm, 0.3 μm, 0.5 μm, and 5 μm with motion speed of v = 0.1 m/s, to clearly derive suitability for clean rooms classified as ISO Class 3 according to DIN EN ISO " Linear guide system drylin NK "For the linear guide system drylin NK by igus Gmb, it is possible, on the calculations of the likelihood of violation of threshold values of the detection sizes 0.2 μm, 0.3 μm, 0.5 μm, and 5 μm with motion speed of v =1 m/s, to clearly derive suitability for clean rooms classified as ISO Class 6 according to DIN EN ISO " The measurement results of the ESD compatibility according to SEMI E show that the linear guide system drylin NK can be classified as "level 1" (ighest rank). Linear guide system drylin TK "For the linear guide system drylin TK by igus Gmb, it is possible, on the calculations of the likelihood of violation of threshold values of the detection sizes 0.2 μm, 0.3 μm, 0.5 μm, and 5 μm with motion speed of v =1 m/s, to clearly derive suitability for clean rooms classified as ISO Class 5 according to DIN EN ISO " The measurement results of the ESD compatibility according to SEMI E show that the linear guide system drylin TK can be classified as "level 1" (ighest rank). Linear guide system drylin WK "For the linear guide system drylin WK by igus Gmb, it is possible, on the calculations of the likelihood of violation of threshold values of the detection sizes 0.2 μm, 0.3 μm, 0.5 μm, and 5 μm with motion speed of v =1 m/s, to clearly derive suitability for clean rooms classified as ISO Class 6 according to DIN EN ISO " The measurement results of the ESD compatibility according to SEMI E show that the linear guide system drylin WK can be classified as "level 1" (ighest rank). See Fraunhofer IPA Report No.: IG See Fraunhofer IPA Report No.: IG Online tools and more information

13 drylin linear technology drylin W profile guides Modular linear guides Interchangeable lubrication-free drylin liners Robust linear housing Ready-to-install linear carriages Single and double rails

14 drylin W profile guides Advantages Lubrication-free, light, quiet, long service life, cost-effective Superior operating properties by combining iglidur bearing elements and anodised rails with round shaft profiles Corrosion-resistant due to coated surfaces Quiet operation Clean as no lubrication required Lightweight due to the use of plastics and aluminium Smooth operation with sliding elements made from lubrication-free iglidur high performance polymers Maintenance free due to integrated lubricants Lubrication-free linear system drylin W drylin W profile guides are a cost-effective system. The design allows extremely high flexibility in the construction and installation thanks to the use of individual or double rails. ard-anodised aluminium is used as rail material and provides the best friction and wear results. With its dry running lubrication-free operation, the profile guide system is extremely resistant to dirt; the cleanliness also makes the system suitable for cleanroom and hygiene applications. Easy to install, maintenance-free Resistant to dirt thanks to dry operation Lightweight and quiet Square rail with floating bearing function for 90 degree installation earing with manual clearance adjustment available Typical application areas Agricultural machinery Automotive Medical technology Packaging industry Furniture Available from stock Detailed information about delivery time online. lock pricing online No minimum order value. From batch size 1. drylin W profile guides Products overview Profile guides for almost unlimited design freedom Single components: housing bearings Single components: single and double rails Material: die-cast zinc, aluminium or stainless steel Material: aluminium, hard anodised Round or square design Design freedom Liners made from iglidur high performance polymers Stainless steel rails made from V4A From page 894 From page 890 Assembled : complete carriages Accessories Pre-assembled Manual clamp for single bearing housing and Variable lengths and widths complete carriages Mono-slide carriage made from aluminium End caps for high profile rails From page 902 From page 910 Profiles with various geometric designs, installation sizes and clearances Max. +0 C Min. - C Carriage lengths: 60-0 mm Carriage widths: mm Rail length: up to 4,000 mm ybrid guides Linear housing with integrated single or double roller Low driving forces Available as single housing or complete carriage From page 915 Service life calculation ased on drylin W Measurement From page 1073 Linear modules SLW/SAW/GRW/ZLW From page Online tools and more information 3D-CAD files, prices and delivery time online 883

15 drylin W profile guides Application examples drylin W profile guides Online tools Expert for linear guides: system selection & service life calculation with CAD Configure and calculate linear bearings constantly expanded by new sizes and products Easily calculate the service life of your required linear guide and configure with a few clicks. Select a drylin system and add the relevant environmental parameters. Select the bearing size, carriage, number and position. Then enter the distance between the rails and the mounting. Define more relevant parameter of the guidance and select a rail length. The results are displayed. drylin linear bearings enable precise positioning at high speeds. Unlike conventional bearings, they do not require lubrication and are corrosion free. Lightweight through the use of plastic and aluminium with a corrosion free coating, the guides in the drylin range impress with their quiet and precise running. Download the online tools App Adjustment mechanisms on gym equipment no longer have to be maintained thanks to the igus drylin W profile guides. The closing mechanism on this casting machine is subjected to high temperatures and dirt. To make it as durable as possible despite this, it is mounted with a drylin W profile guide. drylin CAD configurator: generate complete 3D models for drylin linear technology to your specifications The igus CAD online configurator gives you the ability to design and save your linear guide as a system, individual components directly as a 3D model in all commonly used formats, or to have these sent by free of charge and without registration. Due to the price advantage coupled with the resistance against dirt and dust, the customer opted for drylin W. Quiet, low vibration adjustments in the stage technology field are enabled through the use of drylin W linear guide based on steel shafts in combination with stainless steel housing bearings. 884 Online tools and more information 3D-CAD files, prices and delivery time online 885

16 drylin W profile guides Product selection drylin W profile guides Technical data Floating bearings Profiles Single rail, round Single rail, square Double rail, round Double rail, square igh profile, round igh profile, square Stainless steel Carbon Curved rail J J0 X A180 E7 depends on material and radii Liner material Floating bearings for all directions (up to ±1 mm) compensate misalignments and parallelism errors. Possible combinations in assembled rail Floating bearings aid assembly when using single rails Assembly is easy with the drylin WQ square profile. Floating bearings for all directions (±1 mm) compensate misalignments and parallelism errors between rails. This eliminates jamming, otherwise only prevented by time-consuming manual alignment of the system. Although drylin W is a profile rail system, it is able to compensate angular errors about the x-axis. An angular adjustment of ±7 is possible here. This effectively eliminates the misalignment known to occur when fitting to sheet metal fabrications. Available floating bearing blocks ±0.2 earing carriage - material Zinc die-cast Aluminium Stainless steel ±0.2 earing carriage - options With manual clamp Clearance adjustment ybrid bearings Fixed bearing Floating bearing ±1.0 LL - round Linear guides Pre-assembled carriages ybrid carriage Mono-slide carriage LLY - square ±1.0 Systems Lead screw modules elt drive axis With measuring system Fixed bearing Floating bearing LLZ - square Standard Optional ±7 Fixed bearing Floating bearing rotating - square 886 Online tools and more information 3D-CAD files, prices and delivery time online 887

17 drylin W profile guides Liners drylin W profile guides Liners Lubrication-free iglidur high performance polymers Form-fit torque resistance drylin liners made from high performance polymers Available housing bearing & carriages ousing bearing, square iglidur J iglidur J0 Suitable liners iglidur X iglidur E7 iglidur A180 Vibration-dampening Low friction, low wear Corrosion resistant Axial retention Extremely wear resistant tribopolymers improved by precisely blended additions of strengthening materials and solid lubricants, tested a thousand times and proved a million times that is iglidur. Further to the general properties, every iglidur bearing material has a series of special features, which account for its particular suitability for certain applications and requirements. The detailed description of the materials can be found in the respective sections. Lubrication-free Corrosion resistant Low coefficients of friction Maintenance-free Dirt resistance Lightweight igh wear resistance Excellent price-performance ratio Standard Aluminium ousing bearing, round Standard Stainless steel Aluminium Aluminium, tandem Resistant to dirt "Turn-to-fit" Integrated flute design for dirt to pass through ybrid roll and slide Open geometric design Guide carriage, fitted for rapid assembly Standard, assembled, square Standard, assembled, round ybrid, round The all-rounder iglidur J The specialist iglidur J0 The extreme iglidur X The marathon runner iglidur E7 The FDA-compliant iglidur A180 "Turn-to-fit", round Application temperature -50 to +90 C -50 to +90 C -100 to +0 C -50 to +70 C -50 to +90 C est coefficient of friction with steel shaft aluminium, hard anodised steel hard chrome-plated steel/stainless steel shaft stainless steel shaft Contact resistance > Ωcm > 10 8 Ωcm < 10 5 Ωcm > 10 9 Ωcm > Ωcm Moisture absorption 1.3 % weight 0.7 % weight 0.5 % weight < 0.1 % weight 0.2 % weight Maximum service life aluminium, hard anodised aluminium, hard anodised hardened stainless steel steel/stainless steel shaft stainless steel shaft Possible shafts all shaft materials aluminium, hard anodised hardened stainless steel steel/stainless steel shaft all shaft materials Permissible stat. surface pressure 35 MPa 23 MPa 150 MPa 18 MPa 28 MPa Part No. JUM-... J0UM-... XUM-... E7UM-... A180UM-... Complete carriages Standard Optional Mono-slide, square 888 Online tools and more information 3D-CAD files, prices and delivery time online 889

18 drylin W profile guides drylin W profile guides Product range Single rail, square, hard-anodised aluminium drylin W profile guides Product range ousing bearing, square, made from zinc or aluminium drylin W profile guides K1 C1 C3 G1 A3 Can be combined with: WSQ-... WSQ-... WSX-... G2 WJ0QM da K3 WSQ-... C6 C4 C5 L K2 A1 a y x! Cozz! Coz- h h2 ard anodised surfaces Curved rail profiles Page 874 Page 878 Technical data and dimensions [mm] Part No. Weight 57) da L a h h1 h2 G1 G2 A1 Q1 Q2 ± Max. [kg/m] WSQ-06 WSQ-10 WSQ-16 WSQ ,000 4,000 4,000 4, ) ) Part No. C4 C5 C5 C6 C6 K1 for Geometrical Moment of Min. Max. Min. Max. screw moment of inertia resistance ly lz Wby Wbz DIN 912 [mm 4 ] [mm 4 ] [mm 3 ] [mm 3 ] WSQ-06 WSQ-10 WSQ-16 WSQ M4 58) 58) 2,0 16,100 33,000 56, ,0 10,800 34, ,700 2, ,100 Standard hole pattern: C5 = C6, please order with drawing for C5 C6 57) eight dimension minus the bearing clearance tolerance 58) Plain holes Can be combined with: WJ0QM-... h1 Q2 Q1 Technical data and dimensions [mm] Part No. WJ0QM WJ0QM LLZ WJ0QM LLY WJ0QM AL WJ0QM WJ0QM LLZ WJ0QM LLY WJ0QM AL WJ0QM WJ0QM LLZ WJ0QM LLY WJ0QM AL WJ0QM-01- WJ0QM-01--LLZ WJ0QM-01--LLY WJ0QM-01--AL single rail Length WSQ Guide rail Square Shafts Ø Rail length [mm] Floating bearing clearance Floating bearing direction Weight C1 C3 A3 K2 K3 Static load capacity WJ0QM LLY Coy Coz+ Coz [g] [N] [N] [N] M4 M ± 0.5 z M4 M ± 0.5 y M4 M M4 M M5 1,0 1,0 0 ± 0.7 z M5 1,0 1,0 0 ± 0.7 y M5 1,0 1, M5 1,0 1, ,100 2,100 0 ± 1.0 z ,100 2,100 0 ± 1.0 y ,100 2, ,100 2, ,0 3,0 500 ± 1.0 z ,0 3,0 500 ± 1.0 y ,0 3, ,0 3,0 500 Order example: WJ0QM-01-06: ousing bearing, square WJ0QM LLZ: ousing bearing, square with floating z-direction WJ0QM AL: ousing bearing, square, made from aluminium drylin W iglidur bearing material housing bearing ousing bearing, square Standard Options Floating bearing in y-direction Options: LLY: Floating bearing in y-direction LLZ: Floating bearing in z-direction AL: ousing bearing made from aluminium 890 Online tools and more information 3D-CAD files, prices and delivery time online 891

19 drylin W profile guides drylin W profile guides Product range Single rail, round, hard-anodised aluminium drylin W profile guides Product range ousing bearing, round, made from die-cast zinc or aluminium drylin W profile guides C1 K1 C3 G2 G1 A3 C1 C3 A3 K2! Coz- C6 C4 C5 L K3 WJ0UM K2! Coz- y x z! Coz- Q2 Stainless steel version available Page 899 da di K3 WS-.. A1 a h h2 This assembled position not possible for WS-10 ard anodised surfaces Curved rail profiles Page 874 Page 878 Stainless steel version available Page 898 Technical data and dimensions [mm] Part No. Weight 57) da di L a h h1 h2 G1 G2 A1 Q1 Q2 ± Max. [kg/m] WS-10 WS ,000 4, ) WS , WS , Part No. C1 C3 C4 C5 C5 C6 C6 A3 K1 for Geometrical Moment of Min. Max. Min. Max. screw moment of inertia resistance ly lz Wby Wbz DIN 912 [mm 4 ] [mm 4 ] [mm 3 ] [mm 3 ] WS-10 WS-16 WS- WS ) M10 19,000 36,000 57, ,000 2,850 12,900 35,000 86,000 1,000 1,800 2,700 4, ,900 3,800 Standard hole pattern: C5 = C6, please order with drawing for C5 C6 57) eight dimension minus the bearing clearance tolerance 58) Plain holes Can be combined with: WJ0UM(T)-... WJ0UME-... WJUM-..-ES-FG WJRM-... di Q1 h1 Technical data and dimensions [mm] Part No. WJ0UM WJ0UM LL WJ0UM AL WJ0UM WJ0UM LL WJ0UM AL WJ0UM-01- WJ0UM-01--LL WJ0UM-01--AL WJ0UM-01- WJ0UM-01--LL WJ0UM-01--AL WS Guide rail Floating bearing clearance single rail Shafts Ø Length Rail length [mm] Weight C1 C3 A3 K2 K3 Static load capacity WJ0UM LL Coy Coz+ Coz [g] [N] [N] [N] M5 1,0 1,0 0 ± M5 1,0 1, M5 1,0 1, ,100 2,100 0 ± ,100 2, ,100 2, ,0 3,0 500 ± ,0 3, ,0 3, M10 4,800 4, ± M10 4,800 4, M10 4,800 4, Order example: WJ0UM-01-10: ousing bearing, round WJ0UM LL: ousing bearing, round, floating bearing WJ0UM AL: ousing bearing, round, made from aluminium drylin W iglidur bearing material housing bearing ousing bearing, round Standard Options Floating bearing Options: LL: Floating bearing AL: ousing bearing made from aluminium 892 Online tools and more information 3D-CAD files, prices and delivery time online 893

20 drylin W profile guides drylin W profile guides Product range ousing bearing, tandem, round, anodised aluminium My sketches Material WJ0UMT AL C1 C3 A3 drylin W Liner iglidur J0 ousing bearing, round Tandem Standard Aluminium K2 K3 Technical data and dimensions [mm] Part No. Weight C1 C3 A3 K2 K3 Static load capacity Coy Coz+ Coz [g] [N] [N] [N] WJ0UMT AL WJ0UMT AL M5 2,0 2,0 2,0 2, Can be combined with: Suitable liner materials: WS-... WS-..-ES-FG-... WS-... WS-...-ES-FG WSX-... iglidur J iglidur J0 iglidur X iglidur E7 iglidur A Online tools and more information 895

21 drylin W profile guides drylin W profile guides Product range ousing bearing, round, adjustable clearance drylin W profile guides Product range earings, individually, round, with spring pretension drylin W profile guides Option WJ0UME WJ0UM P Picture shows WJUME drylin W Liner iglidur J0 ousing bearing, round Adjustable Standard drylin W Liner iglidur J0 ousing bearing, round Standard Preload K2 Allen key supplied K2 SW SW G1 G1 C3 C1 A3 C3 C1 A3 Technical data and dimensions [mm] Part No. Weight C1 C3 A3 K2 SW G1 Static load capacity Coy Coz+ Coz [g] [N] [N] [N] WJUME WJ0UME WJ0UME , , Technical data and dimensions [mm] Part No. Weight Camber Dimensions as Part No. [g] [N] WJUM P WJUME WJUM P WJUME WJUM P WJUME WJ0UM P WJ0UME WJ0UM P WJ0UME WJ0UM P WJ0UME WJ0UM P WJ0UME WJ0UM-01--P WJ0UME-01- WJ0UM-01--P WJ0UME-01- WJ0UM-01--P WJ0UME-01- WJ0UM P WJ0UME-01- Can be combined with: Suitable liner materials: Can be combined with: Suitable liner materials: WS-... WS-..-ES-FG-... WS-... WS-...-ES-FG WSX-... iglidur J iglidur J0 WS-... WS-..-ES-FG-... WS-... WS-...-ES-FG WSX-... iglidur J iglidur J0 896 Online tools and more information 3D-CAD files, prices and delivery time online 897

22 drylin W profile guides drylin W profile guides Product range Single rail round, made from stainless steel V4A drylin W profile guides Product range Round double rail and housing bearing, made from V4A stainless steel drylin W profile guides C1 C1 K1 C3 A3 K1 C3 da da A2 A G1 A3 C6 C4 C5 G2 L C6 C4 C5 L Material for housing and shaft support 1.48 (AISI 316) Shaft material (AISI 316Ti) K3 K2 Q2! Coz-! Coz- h h2 Q1 10- Material for housing and shaft support 1.48 (AISI 316) y K2 b y x z! Coz- Material for shaft, shaft support, housing (AISI 316Ti) A1 a h1 Shaft material (AISI 316Ti) Material for shaft, shaft support, housing (AISI 316Ti) K3 h a h2 Technical data and dimensions [mm] Part No. Weight 57) da L a h h1 h2 G1 G2 A1 Q1 Q2 ± Max. 0.3 [kg/m] WS-10-ES-FG WS-16-ES-FG WS--ES-FG WS--ES ,000 3,000 3,000 3, ) Part No. C1 C3 C4 C5 C5 C6 C6 A3 K1 for Geometrical Moment of Min. Max. Min. Min. screw moment of inertia resistance ly lz Wby Wbz DIN 912 [mm 4 ] [mm 4 ] [mm 3 ] [mm 3 ] WS-10-ES-FG WS-16-ES-FG WS--ES-FG WS--ES ) M ,217 7,854 19, ,217 7,854 19, , ,534 Technical data and dimensions [mm] Part No. Weight 57) da L a b h h2 A A2 [kg/m] ±0. h9 Max. 0.3 WS-10--ES-FG , Part No. C4 C5 C5 C6 C6 K1 for screw Min. Max. Min. Max. DIN 912 WS-10--ES-FG ) eight dimension minus the bearing clearance tolerance ousing bearing round, made from stainless steel V4A 57) eight dimension minus the bearing clearance tolerance 58) Plain holes Can be combined with: Suitable liner materials: Technical data and dimensions [mm] Part No. Weight C1 C3 A3 K2 K3 Static load capacity Flat-head Coy Coz+ Coz- [g] screw [N] [N] [N] WJUM ES-FG 59) WJUM ES-FG 59) WJUM-01--ES-FG 59) WJUM-01--ES 59) M10 M5 3,800 6,900 11,000 16,000 3,800 6,900 11,000 16, ,450 1,900 3,600 59) Alternative with XUMO liners for high temperatures available. Part No. WXUM WJ0UM(T)-... WJ0UME-... WJUM-..-ES-FG WJRM-... iglidur J iglidur E7 iglidur A Online tools and more information 3D-CAD files, prices and delivery time online 899

23 drylin W profile guides drylin W profile guides Product range Double rail, square, hard-anodised aluminium drylin W profile guides Product range igh profile rail, square, hard-anodised aluminium drylin W profile guides C4 C6 K1 C1 C3 A3 C5 da G2 G1 b b dr L da WJ0QM K3 WSQ-06- K2 A1 h2 a da C4 C1 C6 K1 C3 h Q1 h1 Q2 C5 y x z A3 X Y a nh h h1 da G1 L ard anodised surfaces Page 874 Curved rail profiles Page 878 dr b K2 L G2 Suitable end caps Page 912 Technical data and dimensions [mm] WJ0QM- K3 WSQ- A1 h2 h da Q2 a1 Q1 a Part No. Weight 57) da dr L a A1 b h h1 h2 G1 G2 a1 61) Q1 Q2 ± Max. [kg/m] WSQ , ) WSQ , ) WSQ-10- WSQ , , ) ) WSQ , ) WSQ , WSQ , Part No. C4 C5 C6 K1 for screw Geometrical Moment of moment of inertia resistance Min. Max. Min. Max. ly lz Wby Wbz DIN 912 [mm 4 ] [mm 4 ] [mm 3 ] [mm 3 ] WSQ-06- WSQ WSQ-10- WSQ WSQ-10-1 WSQ M5 58) M5 58) 58) 58) 58) 19, ,900 71, ,000 1,175, ,700 1,0 1,600 5,580 7,070 8,000,500 1,100 3,500 3,000 8,0 18,0 9, ,700 WSQ ,145,000 75,0 23,600 4,500 57) eight dimension minus the bearing clearance tolerance 58) With plain holes 61) WSQ-06-/-10-/ a single row of mounting holes down the centreline, WSQ-10-80/-10-1/--80 two parallel rows of mounting holes Can be combined with: Technical data and dimensions [mm] Part No. Weight da L a b h h1 nh X Y Geometrical WSX-06- WS Q Profile rail Can be combined with: WS X moment of inertia Moment of resistance ly lz Wby Wbz [kg/m] 0.1 Max. [mm 4 ] [mm 4 ] [mm 3 ] [mm 3 ] , ,391 11,674 1, Order example: WSX-06-: igh profile rail, square WSQ-06-: Standard double rail, square Square Shafts-Ø Rail width [mm] Length Rail length [mm] Profile rail igh profile rail Shafts-Ø Rail width [mm] Length Rail length [mm] WJQM-... WW-... WWC-... WJQM-... WW-... WWC Online tools and more information 3D-CAD files, prices and delivery time online 901

24 drylin W profile guides drylin W profile guides Product range Guide carriage, assembled, square drylin W profile guides Product range Mono-slide carriage, anodised aluminium drylin W profile guides complete system Page 914 Complete system Page 914 WW WWC WW K2 A2 A Guide carriage Shafts-Ø [mm] Profile width Carriage length K2 Mono-Slide guide carriage Shafts-Ø [mm] Profile width Carriage length All parts can be ordered individually WJ0QM C2 C or as an assembled system Page 914 A2 A 2 2 WSQ-06- C2 C Technical data and dimensions [mm] Part No. 54) Weight A C A2 C2 K2 2 57) Static load capacity Width Length ±0. Coy Coz Mox Moy Moz [kg] [N] [N] [Nm] [Nm] [Nm] WW WW WW WW WW WW M4 M4 M4 M4 M4 M ,680 1,680 1,680 1,680 1,680 1, ) eight dimension minus the bearing clearance tolerance 54) Optionally available with hand clamp suffix "-KA" Order example: WW : fitted guide carriage WWC : Mono-Slide guide carriage Technical data and dimensions [mm] Part No. Weight A C A2 C2 K2 2 57) Static load capacity Width Length ±0.2 Coy Coz Mox Moy Moz [kg] [N] [N] [Nm] [Nm] [Nm] WWC WWC WWC M4 M4 M ,680 1,680 1, WWC WWC WWC-10-- WWC WWC WWC WWC WWC WWC WWC WWC WWC WWC WWC ,800 2,0 4,800 2,0 4,800 2,0 4,800 2,0 4,800 2,0 4,800 2,0 4,800 2,0 4,800 2,0 4,800 2,0 8,0 4,0 8,0 4,0 8,0 4,0 12,800 6,0 12,800 6, WWC ,800 6,0 5 1,0 1,0 57) eight dimension minus the bearing clearance tolerance Can be combined with: Suitable liner materials: Can be combined with: Suitable liner materials: WSQ-... WSXQ-... iglidur J0 WSQ-... WSXQ-... iglidur J 902 Online tools and more information 3D-CAD files, prices and delivery time online 903

25 drylin W profile guides drylin W profile guides Product range Double rail, round, hard-anodised aluminium drylin W profile guides Product range igh profile rail, round, hard-anodised aluminium drylin W profile guides C4 C1 C6 C3 C5 b A1 G2 G1 A3 di da b K1 WSX h2 nh X Y h n nb WJ0UM K2! Coz- di y x z L y x z WSX-10- WSX a ard anodised surfaces Page 874 Curved rail profiles Page 878 K3 WS-.. A1 h2 h1 a1 a da! Coz- di Q1 h Q2 This orientation not possible for WS-10-/ WS-10-80/WS-10-1 Technical data and dimensions [mm] Part No. Weight 57) da di L a A1 b h h2 s K1 C1 C3 G1 WSX-10- WSX WSX [kg/m] ± Max ± , ± , ± , Technical data and dimensions [mm] Part No. Weight 57) da di L a A1 b h h1 h2 G1 G2 a1 62) Q1 Q2 [kg/m] ±0. Max. WS-10- WS WS , , , ) ) ) WS , WS , WS , ) eight dimension minus the bearing clearance tolerance 62) WS-10-/ a single row of mounting holes down the centreline; WS-10-80/-10-1/--80/--1 two parallel rows of mounting holes Part No. C4 C5 C6 K1 Geometrical Moment of for screw moment of inertia resistant ly lz Wby Wbz Min. Max. Min. Max. DIN 912 [mm 4 ] [mm 4 ] [mm 3 ] [mm 3 ] WS-10- WS WS-10-1 WS WS ) 58) 58) 91, ,000 1,3, ,600 1,080,000 5,100 6,100 7,100 26,100 78,700 3,600 9,0,000 9,900 21, ,900 4,000 WS M10 4,867, ,000 62,0 8,500 Standard hole pattern: C5 = C6, please order with drawing for C5 C6. 58) Plain holes nh n nb X Y Surface inertiamoment Moment of resistance ly lz Wby Wbz [mm 4 ] [mm 4 ] [mm 3 ] [mm 3 ] ,560 54,910 3,902 3, ,653 83,613 11,515 4, , ,489 14,618 24,586 57) eight dimension minus the bearing clearance tolerance Length Length WS WS X Profile rail, round Shafts-Ø Rail width [mm] Rail length [mm] Profile rail igh profile rail Shafts-Ø Rail width [mm] Rail length [mm] 904 Online tools and more information 3D-CAD files, prices and delivery time online 905

26 drylin W profile guides drylin W profile guides Product range Assembled guide carriage, round drylin W profile guides Product range Carriage for curved rail drylin W profile guides WW- K2 Complete system Page 914 Option A2 A WW KA y x z WJ0UM C2 C 2 Guide carriages for curved rails Shafts-Ø Profile width [mm] Carriage length [mm] With manual clamp WS-... C C2 Options: lank: Standard KA: With manual clamp In the following sizes, also available with adjustable clearance: 10, 16 and ; order example: WWE Curved rail profiles Page 878 Technical data and dimensions [mm] Part No. 54) Weight A C A2 C2 K2 2 57) Static load capacity Width Length ±0. Coy Coz Mox Moy Moz [kg] [N] [N] [Nm] [Nm] [Nm] WW WW WW-10-- WW WW WW WW WW WW WW WW WW WW WW--80- WW--80- WW WW--1- WW M10 M10 M ,800 4,800 4,800 4,800 4,800 4,800 4,800 4,800 4,800 8,0 8,0 8,0 12,800 12,800 12,800 19,0 19,0 19,0 2,0 2,0 2,0 2,0 2,0 2,0 2,0 2,0 2,0 4,0 4,0 4,0 6,0 6,0 6,0 9,600 9,600 9, ,0 1,0 1, , ,360 1, , ,360 1,8 K2 oth positions possible A3 Kz A2 Vz A 2 Technical data and dimensions [mm] Part No. 54) Weight A C A2 A3 C2 K2 2 Vz Kz ± [kg] WW WW KA WW WW KA M4 M ) Optionally available with hand clamp suffix "-KA" 57) eight dimension minus the bearing clearance tolerance 54) Optionally available with hand clamp suffix "-KA" Can be combined with: Suitable liner materials: WS-... WS-...-ES-FG WSX-... iglidur J iglidur J0 iglidur X iglidur E7 iglidur A180 Can be combined with: WS-... WS-...-ES-FG More information Online tools and more information 3D-CAD files, prices and delivery time online 907

27 drylin W profile guides drylin W profile guides Product range Double rail, reduced weight, hard-anodised aluminium drylin W profile guides Product range Double rail/carriage for camera slider drylin W profile guides Wear resistant, smooth and quiet motion Adjustable brake level due to the turn-to-fit function Easy and fast assembly Further dimensions such as standard rails WS page 904 WSQ-06--CAM-500 Technical options: Adjustable bearing housing Page 896 Manual clamp Page 910 % weight reduction through C5 K4 WS-10--CAM-500 L 0.5 x L K1 (8x) C4 C6 machined recesses Matching housing bearing and carriage made from plastic, aluminium, die-cast zinc or stainless steel K1 C5 C6 K3 b K2 C/2 A2 A K4 S K1 (4x) WS-10--CAM-1000 K4 K1 K1 (8x) (8x) WS CAM-500 K4 K1 (10x) drylin W guide rail Part No. Identical L C4 C5 C6 S K1 for K4 Weight profile screw DIN 192 [g] WSQ-06--CAM-500 WSQ M5 3/8" 16-UNC 63) 159 WS-10--CAM-500 WS /8" 16-UNC 63) 353 WS-10--CAM-1000 WS-10-1, /8" 16-UNC 63) 706 WS CAM-500 WS /8" 16-UNC 63) ) * UNC = Unified National Coarse, Anglo-American. Screw thread standard Application example: camera slider with standard rail and carriage drylin W special rails with 3 holes, 3/8" thread Part No. L C5 C6 Weight WSQ-06--SL-1000 WSQ-06--SL-1500 WS-10--SL-1000 WS-10--SL-1500 WS SL-1000 WS SL-1500 WS SL-1000 WS SL-1500 WS--80-SL-1000 WS--80-SL-1500 Part No. C A WW SL WW SL WW SL 64) 65) WW SL 64) 65) WW SL 64) 65) WW-10---SL 64) 65) WW SL 64) 65) WW SL 64) 65) WW SL ± 1 ± 1 [kg/m] 06 1, , , , , , , , , , drylin W complete carriage with ø10 mm through hole for 3/8" thread 64) Optionally available with hand clamp suffix "-KA" 65) Optional with adjustable Turn-To-Fit bearing (Order example: WWE- ) L L/2 ± 1 Part No. C A WW SL 65) 64) 65) WW SL 64) 65) WW SL 64) 65) WW SL 64) 65) WW--80--SL 64) 65) WW--80--SL C2 C 908 Online tools and more information 3D-CAD files, prices and delivery time online 909

28 drylin W profile guides drylin W profile guides Product range Accessories: Manual clamp for simple positioning drylin W profile guides Product range Accessories: Manual clamp for square rails drylin W profile guides Vz K z Vz Kz K x Kx Vx Vx Mk Mk Dk Dk Technical data and dimensions [mm] Part No. Mk Vx Kx Vz Kz Dk Min. holding strength 67) Min. tightening torque WKA-10 66) WKA-16 66) WKA- 66) WKA- 66) N 60 N 70 N 70 N Nm 1.5 Nm 1.5 Nm 1.5 Nm 66) The manual clamp is also available assembled as a complete carriage (suffix "-KA", order example: WW KA). Dimensions complete carriage WW page ) Condition: dry rail surface Technical data and dimensions [mm] Part No. Mk Vx Kx Vz Kz Dk Min. holding strength 67) Min. tightening torque WKAQ ) 137) WKAQ ) WKAQ ) WKAQ- 137) N Nm N Nm N 1.5 Nm N 1.5 Nm 67) Condition: dry rail surface 133) Also Aluminium version available, suffix "-AL" 137) The manual clamp is also available assembled as a complete carriage (suffix "-KAQ", order example: WW KAQ). Dimensions complete carriage WW page 902 Accessories: aluminium manual clamp Accessories: Manual clamp for higher forces Kz Vz Kx Vx Mk Dk Technical data and dimensions [mm] Part No. Mk Vx Kx Vz Kz Dk Min. holding strength 67) Min. tightening torque WKA-10-AL 68) WKA-16-AL 68) WKA--AL 68) WKA--AL 68) N 60 N 70 N 70 N Nm 1.5 Nm 1.5 Nm 1.5 Nm 67) Condition: dry rail surface 68) The manual clamp is also available assembled as a complete carriage (suffix "-AL-KA", order example: WW KA). Dimensions complete carriage WW page 906 Technical data and dimensions [mm] Part No. Mk Vx Kx Vz Kz Dk Min. holding strength 67) Min. tightening torque WKD ) WKD ) WKD ) WKD-16 69) WKD-15 69) WKD- 69) N 70 N 90 N 90 N 90 N 90 N 2.5 Nm 2.5 Nm 3.5 Nm 3.5 Nm 3.5 Nm 3.5 Nm 67) Condition: dry rail surface 69) The manual clamp is also available assembled as a complete carriage (suffix "-KA", order example: WW KD). Dimensions complete carriage WW page Online tools and more information 3D-CAD files, prices and delivery time online 911

29 r b1 drylin W profile guides drylin W profile guides Product range Accessories: Replacement-liners and end caps for high profile rails drylin W replacement polymer liners - long, open design Material ousing bearings Part No. liners in the drylin R-Chapter 10/16// (Standard) iglidur J0 WJ0UM-01-Ø J0UMO-01-Ø 70) Page /16// iglidur J WJUM-01-Ø JUMO-01-Ø Page /16// (igh temperature) iglidur X WXUM-01-Ø XUMO-01-Ø Page /16// iglidur E7 WE7UM-01-Ø E7UMO-01-Ø Page ) Available also as floating version, Part No. J0UMO-01-Ø-LL drylin W, liners - long design, square d2 Y Y t drylin W profile guides Installation instructions 1 2 F = 50 N drylin W rail with housing bearings During the installation process, a compressive force of minimum 50 N is recommended on the centre of the mounting surface. Alternatively, a plastic hammer/soft face hammer can be used during and after the mounting to align the bearing. Installation size Max. tightening torque [Nm] Thread W M4 W W-16 1 W- 1 W-.0 M10 drylin W profile guides Part No. -Tolerance d2 b1 r t J0QM J0QM J0QM J0QM Available also as floating bearing J0QM-01-Ø-LLZ (z-direction), J0QM-01-Ø-LLY (y-direction) drylin W replacement polymer liners - adjustable Material ousing bearings Part No. liners 10 (adjustable) iglidur J WJUME JUME / (adjustable) iglidur J0 WJ0UME-01-Ø J0UME-01-Ø 1 Tightening torque for drylin connections between metal parts Page 879 drylin W rail with complete slide system During the installation process, a compressive force of minimum 50 N is recommended on the centre of the mounting surface. Alternatively, a plastic hammer/soft face hammer can be used during and after the mounting to align the bearing. Installation size Max. tightening Thread End caps for drylin high profile rails WSX For drylin W high profile rails WSX Page sizes Protection of the hollow chambers against the entry of foreign particle Easy to fit, easy sideways End caps for cutting edges Part No.: WSX-0601-EC WSX-1001-EC WSX EC WSX EC 2 F = 50 N torque [Nm] W M4 W W-16 1 W- 1 W-.0 M10 Please refer to the drawing for the correct screw assembly sequence. 912 Online tools and more information 3D-CAD files, prices and delivery time online 913

30 drylin W profile guides Ordering options complete system: WK KA C5= Rail options Leave blank: Standard rail with attachment holes C5= mm: Only with a non-symmetrical hole pattern Carriage options lank: Standard -KA: Carriage with assembled manual clamp (available installation sizes/ Complete Set Shaft diameter Rail width Length of carriage Number of complete carriages Rail length [mm] Carriage options Rail options lengths From page 910) -KA-AL: Carriage with assembled manual clamp (housing made of aluminium) Model WK: Complete system with rails and carriage WS: Individual rail W(...)UM: Individual housing bearing WW: Complete carriage Order example: WK : fully assembled linear guide system comprising a rail (WS-10-) with a length of 1,500 mm and a width of mm plus a guide carriage (WW ) with a length of 150 mm and a width of 73 mm. Linear rail info: Standard, symmetrical hole pattern: C5=C6; in the case of C5 C6, please order with a drawing. Optional rails without holes available (suffix NO OLES ). 914 Online tools and more information

31 drylin linear technology drylin W hybrid bearings Lubrication-free roll and slide Low driving forces For manual adjustment Absorption of offset forces Single bearings and complete carriages

32 drylin W hybrid bearings Advantages ybrid bearings from the drylin W linear construction kit drylin W rail made from hard-anodised aluminium ousing made of robust zinc die-casting or durable stainless steel Lubrication-free and quiet operation Compact aluminium carriage with assembled drylin W hybrid bearings Liners made from iglidur high performance polymers Combined sliding and rolling for low driving forces drylin hybrid roller bearings offer a unique lubrication-free combination of plain and roller bearings. The integrated rollers achieve low driving forces, while the sliding effect simultaneously protect against lateral forces. This makes drylin hybrid bearings ideal for manual adjustments in door applications (e.g. machine doors, safety doors), but also in mobile control panels. The efficient design using plastics with zinc die-casting also cuts costs. ybrid bearings can be used on various hard-anodised aluminium profiles from the drylin W linear construction kit. Smooth operation Low-profile Offset and abuse forces are easily absorbed by sliding elements Location on rail ensures reliability Matching guide rails made from hard anodised aluminium Low driving force required Cost-effective drylin W hybrid bearings Product overview Slide and roll ybrid bearings with single roller Lubrication-free due to bearing supported plastic roller Low driving forces Can be combined with drylin W single and double rails Page 9 ybrid bearing made from stainless steel with single roller Corrosion-free due to stainless steel housing Easy to clean Page 922 ybrid bearings with double rollers Low coefficient of rolling friction is still maintained with deviating load directions Increased load capacity Variable installation position Page 921 ybrid bearing made from stainless steel with double rollers Corrosion-free due to stainless steel housing igh media resistance Page 922 Can be combined with drylin W linear profile rails Typical application areas Machine doors Safety doors Control panels Easy to move thanks to the combination of rolling and sliding Available from stock Detailed information about delivery time online. lock pricing online No minimum order value. From batch size 1. Service life calculation Complete carriages WWR Complete carriage for lateral adjustments Guidance via a double rail without support Also available as a short, compact carriage for variable multi-carriage solution Page 923 Complete carriages WW Complete carriage with 4 integrated hybrid bearings For horizontal installation Variable carriage lengths and widths Page 924 Available as singleand double-shaft rail Tightening torque for drylin connections between metal parts Page 879 Suitable rail profiles From page 892 Camera slider From page Online tools and more information 3D-CAD files, prices and delivery time online 917

33 drylin W hybrid bearings Application examples drylin W hybrid bearings Technical data drylin W hybrid bearings type 01 The drylin W hybrid bearings from the WJRM type series are each equipped with a bearing-supported plastic roller. The bearing housing is available in 3 installation sizes and can be used with drylin W single or double shaft rails in 2 installation positions. The hybrid bearing should be installed so that the bearing load is applied in the roll direction. Different load directions are possible but causes higher displacement forces drylin W hybrid bearings type 21 The drylin W hybrid bearings in the WJRM type series are each equipped with two bearing-supported plastic rollers at an angle of 70 or 80. Available in 3 sizes, they can be combined with drylin W single and double shaft rails. The double roller bearings offer a higher load capacity than with a vertical bearing load on the installation area (y-direction). The low coefficient of rolling friction is still maintained with load directions that slightly deviate from this. The smooth, low noise operation and the enormous cost advantages are obtained by the use of the drylin linear bearings on the hard-anodised guide shaft to guide the doors of machine tools. Forces absorbed by hybrid bearing Forces absorbed by hybrid double roller bearing y z z y Adjustment control panel unit Camera stand with drylin WJRM hybrid bearings for far smoother running. Vertical movements are now also possible. Installation Installation position 01 position 02 Installation position WJRM Installation position WJRM The new drylin W hybrid carriage with "door opener" drylin W hybrid bearings in combination with drylin Service life [km] Service life [km] function. W profile guide offer optimum opportunities Load in y-direction (N) Load in y-direction (N) to construct dollies and sliders. WJRM WJRM WJRM-01- WJRM WJRM WJRM Online tools and more information 3D-CAD files, prices and delivery time online 919

34 drylin W hybrid bearings drylin W hybrid bearings Product range ybrid bearings with a bearing-supported plastic roller drylin W hybrid bearings Product range ybrid double bearings with two angled plastic rollers drylin W hybrid bearings WJRM WJRM ybrid bearings Single roller bearing 10 ybrid bearings Double roller bearing 10 C1 C3 A3 K3 2 A1 y z G1 K2 Q2 z y Q1 Installation position 01 Installation position 02 Installation position 02 in installation size ø10 when using a WJRM hybrid bearing Technical data and dimensions [mm] Technical data and dimensions [mm] Part No. Static load Dyn. load capacity Cz+ F v Part No. Static load Dyn. load capacity Cz+ F v capacity Co at total running distance [km] capacity Co at total running distance [km] Max Max. [N] [N] [N] [N] [N m/s] [N] [N] [N] [N] [N m/s] WJRM ) WJRM WJRM WJRM WJRM WJRM Part No. Coefficient Weight A1 A3 2 C1 C3 G1 K2 for K3 for Q1 Q2 Part No. Coefficient of Weight A1 A3 C1 C3 G1 K2 for of friction in thread screw friction in screw z-direction y-direction [µ] [g] [µ] [g] WJRM ) < M5 WJRM < WJRM < WJRM < WJRM-01- < WJRM-21- < ) Deviating from WJRM-02-10, available with an expanded opening angle for installation position 02 WJRM and WJRM-21-16: 70 -Angle between the rolls / WJRM-21-: 80 -Angle between the rolls Optionally available with hand clamp suffix "-KA" Can be combined with: Can be combined with: WS-... WS-..-ES-FG-... WS-... WS-...-ES-FG WSX-... WS-... WS-..-ES-FG-... WS-... WS-...-ES-FG WSX Online tools and more information 3D-CAD files, prices and delivery time online 921

35 drylin W hybrid bearings drylin W hybrid bearings Product range ybrid bearing made form stainless steel drylin W hybrid bearings Product range ybrid carriages for lateral installation drylin W hybrid bearings WJRM-01 with a single roller C1 C3 A3 Material WJRM ES Option WWR K3 A1 K2 2 y z G1 ybrid bearings Single roller bearing 10 Stainless steel Material ES: Stainless steel (AISI 316Ti) ES-FG: Stainless steel precision casting drylin W ybrid carriage Double roller bearing Installation size Compact 1.48 Options: 01: Carriage, short design 15: Complete carriage, long design WJRM-21 with double roller Material K2 3 wx WJRM ES A2 A ybrid bearings Double roller bearing Stainless steel Material ES: Stainless steel (AISI 316Ti) ES-FG: Stainless steel precision casting C2 C A3 2 sx Fs sy Fs 1.48 Technical data and dimensions [mm] Part No. Static load Dyn. load capacity Cz+ F v capacity Co at total running distance [km] Max. [N] [N] [N] [N] [N m/s] WJRM ES-FG WJRM-21--ES-FG Part No. coefficient of friction in Weight A1 A3 2 C1 C3 G1 K2 for z-direction y-direction thread [µ] [µ] [g] WJRM ES-FG WJRM-21--ES-FG < 0.1 < Technical data and dimensions [mm] Part No. A C A2 C2 K2 2 A3 3 sy sy Width Length ±0.17 Min. Max. Min. Max. WWR WWR wx/ wx/ Order example: WWR : Assembled single hybrid carriage as a "door opener" with 2 single roller hybrid bearings and 2 double roller hybrid bearings Can be combined with: Can be combined with: WS-... WS-..-ES-FG-... WS-... WS-...-ES-FG WSX-... WS--80 WS-...-ES-FG WSX Online tools and more information 3D-CAD files, prices and delivery time online 923

36 drylin W hybrid bearings drylin W hybrid bearings Product range ybrid carriages with 4 double roller bearings drylin W hybrid bearings Product range ybrid slider carriages with 4 double roller bearings drylin W hybrid bearings Dimensions Dimensions Design WW WW SL drylin W ybrid carriage Double roller bearing Installation size Carriages length [mm] Ø 10 mm through hole for 3/8" thread for cameras drylin W ybrid carriage Double roller bearing Installation size Carriages length [mm] Slider carriage Optionally available with hand clamp, suffix "-KA" Optionally available with hand clamp, suffix "-KA" Technical data and dimensions [mm] Part No. Weight A C A2 C2 K2 Kt 2 Static load Width Length capacity [kg] Coy [N] WW WW WW WW WW WW WW WW WW WW WW WW WW WW WW ,0 1,0 1,0 1,0 1,0 1,0 1,0 1,0 1,0 2,0 2,0 2,0 3,360 3,360 3,360 Technical data and dimensions [mm] Part No. Weight A C A2 C2 K2 Kt 2 Static load Width Length capacity [kg] Coy [N] WW SL WW SL WW SL WW SL WW SL WW SL WW SL WW SL WW SL WW SL WW SL WW SL ,0 1,0 1,0 1,0 1,0 1,0 2,0 2,0 2,0 3,360 3,360 3,360 Can be combined with: Can be combined with: Can be combined with camera slider rails Page 908 WS--80 WS-...-ES-FG WSX-... WS--80 WS-...-ES-FG WSX Online tools and more information 3D-CAD files, prices and delivery time online 9

37 drylin W hybrid bearings drylin W hybrid bearings Product range ybrid carriages with 4 single roller bearings for horizontal installation Dimensions WW drylin W ybrid carriage Installation size Carriages length [mm] K2 A2 A C2 C 2 Technical data and dimensions [mm] Part No. Weight A A2 C C2 K2 2 Static load capacity Coy Coz Mox Moy Moz WW WW WW--80- [kg] ±0.17 [N] [N] [Nm] [Nm] [Nm] M5 34 1,000 1, ,600 1, ,0 2, Can be combined with: WS-... WS-...-ES-FG WSX Online tools and more information

38 drylin linear technology drylin N low-profile guide Low profile and lightweight Lubrication-free dry-tech sliding elements Anodised aluminium rail igh speed and acceleration possible Quiet operation

39 drylin N low-profile guide Advantages Lightweight, maintenance-free, corrosion resistant and low wear Low profile due to C-profile geometry Clear or black anodised aluminium rails Interchangeable sliding elements as clip version or overmoulded sliding surfaces Lightweight due to the use of plastics and aluminium Lubrication-free low-profile guides drylin N The low-profile range drylin N offers extremely low profiles in several widths. Like all drylin products the carriages run without grease or oil in an anodised aluminium profile. The selected materials and the unique design make drylin N a cost-effective and flexible guide system. Small mounting height between 6 and 12 mm Lightweight Many carriage options also with preload Maintenance-free, dry operation Corrosion resistant Low wear with low coefficient of friction Rails in silver or black anodised drylin N low-profile guide Product overview Numerous options in four different widths and small installation heights Linear guide Carriage size 17 Four sizes: 17, 27, and 80 mm Solid plastic made from high-performance Low profile, lightweight design polymer iglidur J Clear anodised (silver) or black anodised Compact for the smallest installation spaces surfaces Length of carriage up to mm From page 934 Page 934 Variable carriage lengths Carriage with threaded hole or through hole Typical application areas Agricultural machinery Automotive Medical technology Facade construction Packaging industry Carriage size 27 Carriage with changeable sliding elements Sliding carriage with overmoulded sliding element Variable lengths and screw on options Page 936 Carriage size Carriage with thread pin or plain hole Preload version available Page 938 Precise and rattle-free due to spring pre-load Available from stock Detailed information about delivery time online. Lubrication-free sliding elements/ carriage made from high-performance polymer iglidur J/J0 Quiet operation through gliding motion Standard hole pattern Or without holes lock pricing online No minimum order value. No minimum order quantity. Max. +90 C Min. - C 17 mm 80 mm Service life calculation Carriage size 80 Carriage with wide load-bearing surface Lubrication-free due to high-performance polymers iglidur J/J0 Low profile design Page 9 Telescopic system Continuous lengths up to 1,0 mm (total extension) Available with partial, total or over extension With locking mechanism if required Page 942 Cleanroom certificated IPA Fraunhofer Free from toxins, according RoS 02/95/EC ESD-compatible (electronic discharge) Accessories Manual clamp End cap From page 944 ased on drylin N drylin SLN miniature linear module From page Online tools and more information 3D-CAD files, prices and delivery time online 929

40 drylin N low-profile guide Application examples drylin N low-profile guide Online tools Expert for linear guides: System selection & service life calculation with CAD Configure and calculate linear bearings constantly expanded by new sizes and products Easily calculate the service life of your required linear guide and configure with a few clicks. Select a drylin system and add the relevant environmental parameters. Select the bearing size, carriage, number and position. Then enter the distance between the rails and the mounting. Define more relevant parameter of the guidance and select a rail length. The results are displayed. The most important decision criterion for drylin N low-profile guide is the low installation height. drylin N low-profile guide and drylin SD lead screw drives perform the height adjustments. As a black anodised profile, drylin N blends into the design of the 3D printer. Download the online tools App In the redesigning of the table guidance for this automated teller, the focus was on a ready-to-install, cost-effective, durable and lubrication free bearing and system. The quiet, lubrication-free, low-profile design of drylin N made it the ideal solution and enabled it to fulfil all relevant safety requirements. The rails could be connected to the required length. drylin CAD configurator: Generate complete 3D models for drylin linear technology to your specifications The igus CAD online configurator gives you the ability to design and save your linear guide as a system, individual components directly as a 3D model in all commonly used formats, or to have these sent by free of charge and without registration. The removal unit is moved along the X-Y axis using the space-saving and cost-saving drylin N lowprofile guide. The rugged drylin T guide system undertakes the vertical guidance. The sampling device uses drylin linear bearings to remove the products precisely and smoothly. 9 Online tools and more information 3D-CAD files, prices and delivery time online 931

41 drylin N low-profile guide Design rules Floating bearings version drylin N low-profile guide Technical data Floating NW-17 NW-27 NW- NW-80 bearing NW-... NW-... LLZ NW-... LLY NW-... LLYZ LLY LLZ Floating bearing in z-direction LLZ 0.5 LLY Floating bearing in y-direction Y: 0.6 Y: 0.3 Y: 0.4 Y: 0.6 LLZ Floating bearing in yz-direction LLYZ Y: 0.5 Y: 0.4 Y: Y: Technical details on floating bearings Page 879 The 2:1 Rule Page 879 Technical options for drylin low-profile guide Clip-on sliding elements Preload function Depending on the size, up to 3 lubrication-free sliding elements The use of sliding elements with an integrated spring made from the high-performance polymer iglidur preload function prevents the carriages in the rail profile J are clipped on around the zinc die-cast carriage body. from rattling. Adjustment occurs silently using the preload These can be changed any time simply and fast, the diecast principle, making the guide suitable for use in noise-sensi- zinc carriage can be reused. A set of appropriate tive environments such as the automotive, medical or fur- sliding elements is available for every clip-on carriage niture sectors. Pretensioning increases the driving forces (Part No. NEK... Page 946). by max. 10 N. Overmoulded sliding elements Anodised surfaces With this carriage type, the zinc die-cast body is made as All drylin N guide rails are anodised and are distinguished an integral part of the high-performance polymer J/J0 by good wear properties and corrosion resistance. Available during the injection moulding process. For the user this are all rail sizes with clear anodised (silver) as well as with antiproduction process offers the advantage, that the gliding reflex version in black anodised surface. These are technical surface is connected captive and insolubly to the carriage. surfaces and not decorative. Slight crack formations This makes it quicker to install the carriages in the profile. and colour variations cannot be prevented during produc- Mass storage is possible, including in the form of bulk tion, but they do not affect the resistance, the corrosion goods, as the sliding elements cannot come loose. It is behaviour or the gliding properties. Cutting surfaces and not possible to retrofit sliding elements; the carriages must machined surfaces are uncoated. be entirely replaced at the end of their service life. System selection System Rail width N17 17 mm N27 27 mm N mm N80 80 mm Installation height 6 mm 9.5 mm 9.5 mm 12 mm General properties Rail weight 150 g/m 290 g/m 450 g/m 1,1 g/m Carriage weight 1.7 g g g 100 g Max. rail length 2,000 mm 3,000 mm 3,000 mm 4,000 mm earing load, static Fy 50 N 500 N 700 N 1,000 N Fz 50 N 500 N 700 N 1,000 N Mx 0.31 Nm 5 Nm 10 Nm 32.4 Nm My, Mz 0.18 Nm 2.5 Nm 6 Nm 15 Nm Carriage options Floating bearing in y-direction Floating bearing in z-direction Floating bearing in yz-direction Preload (1 N) Over-moulded version Carriage with through bore Carriage with threaded pin Carriage with threaded hole Table 01: System selection 1, available not available Tightening torque for drylin connections between metal parts Metric thread (Da) Torque Recommended torque M3 M4 M5 [Nm] [Nm] Load F [N] M Speed v [m/s] Please be aware of the minimal screw in depth for aluminium and zinc parts: 1.5 x Da Diagram 01: F v diagram, maximum permissible dynamic load 932 Online tools and more information 3D-CAD files, prices and delivery time online 933

42 drylin N low profile guide drylin N low-profile guide Product range The linear guide for the smallest installation space drylin N low-profile guide Product range Guide rails and carriages size 17 drylin N low profile guide C C2 complete system Page 946 Options Standard NW Without holes Anti-reflex NW P C5 C4 A Dp L K3 h Sp C6 y x z Complete Set NW LLY drylin N Guide carriages of carriage Rail width Carriage length Floating bearing in y-direction of carriage: 02: Carriage with threaded pin 22: Double carriage with threaded pin Options: P: Preload Floating bearing: LLY: Floating y-direction LLZ: Floating z-direction LLYZ: Floating yz-direction h1 a K1 NW NW Guide rail dimensions [mm] Part No. L a C4 C5: C6 h h1 K1 73) ly lz Weight max. Min. max. [mm 4 ] [mm 4 ] [g/m] NS ) 2, Ø3.5 1, NS UNGEORT- 72) 2, , NS AR- 72) 2, Ø3.5 1, Selection aid guide carriage Guide carriage dimensions [mm] Part No. Single Double Plain hole Threaded NW NW P NW NW pin Threaded hole Preload Solid plastic Clipped- Moulded on igh temp. Part No. ±0.35 A C C2 K3 74) Sp Dp Weight [g] NW NW P NW NW M3 M3 M3 M ) Please give the desired length in mm, hole pitches symmetrical C5=C6 73) For cap screw with low head (i.e. DIN 7984, DIN 6912, DIN 84, EN ISO 1707) 74) Metal thread All elements can be ordered individually or as assembled NS : Guide rail, size 17, length 1,500 mm NW P-LLY: Guide carriage with threaded pin, size 17, pre-load, floating bearing in y-direction NK LLY: Complete system with two solid plastic guide carriages with threaded pins, size 17, floating bearing in y-direction and 500 mm guide rails with standard holes 934 Online tools and more information 3D-CAD files, prices and delivery time online 935

43 drylin N low profile guide Standard NW P NW P Without holes drylin N low-profile guide Product range The installation size with the largest variety of carriages Anti-reflex NW P NW NW NW P NW T NW NW Selection aid guide carriage Part No. Single Double Plain hole NW NW P NW T NW Threaded pin NW NW NW P NW T NW NW NW P NW T NW P NW P NW P NW P NW NW Sp Threaded hole C5 One-piece design 2 h1 Preload A a Dp C C1 C2 C4 C2 K L K1 Solid plastic K3 Multiple components h Clipped- Moulded on Sp C6 y x z igh temp. drylin N low-profile guide Product range Guide rails and carriages size 27 Complete Set Guide rail dimensions [mm] Guide carriage dimensions [mm] NW NW NW P NW T NW NW NW P NW T NW P NW P NW P NW P NW NW NW T - LLY drylin N low profile guide Part No. ±0.35 A C C1 C2 2 K 73) K3 74) M 75) Sp Dp Weight [g] Ø Ø Ø Ø M M M M Ø M M M Ø M ) Please give the desired length in mm, hole pitches symmetrical C5=C6 73) For cap screw with low head (i.e. DIN 7984, DIN 6912, DIN 84, EN ISO 1707) 74) Metal thread 75) Max. screw torque drylin N Guide carriages complete system Page 946 of carriage Rail width Options igh temperature Floating bearing in y-direction of carriage: See selection aid Options: P: Preload T: igh temperature Floating bearing: LLY: Floating y-direction LLZ: Floating z-direction LLYZ: Floating yz-direction Part No. L a C4 C5: C6 h h1 K1 73) ly lz Weight max. Min. max. [mm 4 ] [mm 4 ] [g/m] NS ) 3, Ø4.5 6, NS UNGEORT- 72) 3, , NS AR- 72) 3, Ø4.5 6, All elements can be ordered individually or as assembled NS : Guide rail, size 27, length 1,500 mm NW P-LLY: Guide carriage with threaded pin, size 27, pre-load, floating bearing in y-direction NK LLY: Complete system with two clipped-on guide carriages with threaded pins, size 27, floating bearing in y-direction and 500 mm guide rails with standard holes 936 Online tools and more information 3D-CAD files, prices and delivery time online 937

44 drylin N low profile guide drylin N low-profile guide Product range Suitable for aluminium construction profiles drylin N low-profile guide Product range Guide rails and carriages size drylin N low profile guide C C1 C2 complete system Page 946 Options Standard NW-01- Without holes NW-02- Anti-reflex C5 C4 C6 L A 2 K h y x z Complete Set NW P - LLY drylin N Guide carriages of carriage Rail width Camber Floating bearing in y-direction of carriage: See selection aid Options: P: Preload Floating bearing: LLY: Floating y-direction LLZ: Floating z-direction LLYZ: Floating yz-direction h1 a K1 NW-01--P NW-02--P Dp K3 Sp NW-11- NW-12- Guide rail dimensions [mm] Part No. L a C4 C5: C6 h h1 K1 73) ly lz Weight 72) NS ) NS-01--UNGEORT- 72) NS-01--AR- max. Min. max. [mm 4 ] [mm 4 ] [g/m] 3, Ø4.5 26, , , , Ø4.5 26, Selection aid guide carriage Part No. Single Double Plain hole Threaded pin Threaded NW-01- NW-01--P NW-11- NW-02- NW-02--P NW-12- hole Preload Solid plastic Clipped- Moulded on igh temp. Guide carriage dimensions [mm] Part No. ±0.35 A C C1 C2 2 K 73) K3 74) Sp Dp Weight [g] NW-01- NW-01--P NW-11- NW-02- NW-02--P NW Ø4.5 Ø4.5 Ø4.5 M4 M4 M ) Please give the desired length in mm, hole pitches symmetrical C5=C6 73) For cap screw with low head (i.e. DIN 7984, DIN 6912, DIN 84, EN ISO 1707) 74) Metal thread All elements can be ordered individually or as assembled NS : Guide rail, size, length 1,500 mm NW-02--P-LLY: Guide carriage with threaded pin, size, pre-load, floating bearing in y-direction NK LLY: Complete system with two clipped-on guide carriages with threaded pins, size, floating bearing in y-direction and 500 mm guide rails with standard holes 938 Online tools and more information 3D-CAD files, prices and delivery time online 939

45 drylin N low profile guide Standard drylin N low-profile guide Product range For high speeds with low loads Without holes A2 C5 C4 C6 K4 C C1 C2 A L h y A3 x z drylin N low-profile guide Product range Guide rails and carriages size 80 Complete Set complete system Page 946 NW LLY drylin N Guide carriages of carriage Rail width Options Floating bearing in y-direction of carriage: See selection aid Options: Floating bearing: LLY: Floating y-direction LLZ: Floating z-direction LLYZ: Floating yz-direction drylin N low profile guide NW h1 K1 a Anti-reflex NW Guide rail dimensions [mm] Part No. L a C4 A3 C5: C6 h h1 K1 73) ly lz Weight max. Min. max. [mm 4 ] [mm 4 ] [g/m] 72) NS , Ø4.5 27,1 2,900 1,1 72) NS UNGEORT- 4, ,1 2,900 1,1 72) NS AR- 4, Ø4.5 27,1 2,900 1,1 Selection aid guide carriage Part No. Single Double Plain hole Threaded pin Threaded NW NW hole Preload Solid plastic Clipped- Moulded on igh temp. Guide carriage dimensions [mm] Part No. ±0.35 A C C1 C2 A2 K4 74) Weight [g] NW NW M4 M ) Please give the desired length in mm, hole pitches symmetrical C5=C6 73) For cap screw with low head (i.e. DIN 7984, DIN 6912, DIN 84, EN ISO 1707) 74) Metal thread All elements can be ordered individually or as assembled NS : Guide rail, size 80, length 1,500 mm NW LLY: Guide carriage, clip-on, size 80, floating bearing in y-direction, NK LLY: Complete system with two clipped-on guide carriages with threaded pins, size 80, floating bearing in y-direction and 500 mm guide rails with standard holes 9 Online tools and more information 3D-CAD files, prices and delivery time online 941

46 drylin N low profile guide drylin N low-profile guide Product range Telescopic rails drylin N low-profile guide Product range Telescopic rails with locking mechanism drylin N low profile guide NT-35- L Total extension C5: 49.5 mm L 60 C6 C mm 60 C5 NT-35- L - L+ Over-extension NT-35- mm L L NT-35- L - Partial extension b L M4 Fmax: 75 N (0 mm/l) L L Solid polymer guide/aluminium rail Lightweight Cost-effective Corrosion resistant Continuous lengths up to 1,0 mm (total extension) N T N T N T Part No. b L min. L max. drylin N drylin N over-extension partial extension drylin N Tip: Telescopic system Telescopic system Telescopic system Rail width Rail width Rail width Length [mm] Length [mm] Length [mm] Option Over-extension [mm] Option Partial extension [mm] Option: Partial extension (e.g.: telescoped length 0 mm, extended length 500 mm) Fmax calculated using this formula allows an easy manual use. igher loads can be taken up by the system, but need a higher drive force. C5 = 49,5 mm L 60 C6 = 49,5 mm 60 C5 drylin NT LM in adjustment of Perspex guard NT-LM mm L L L N T - LM Part No. b Lmin Lmax Order example: NT-LM-35-0: drylin N telescopic rail with locking mechanism, 35 mm width, retracted length 0 mm drylin NT LM in guard door adjustment in a machine drylin detent in end and centre position at full extension dimensions [mm] Individual position detent upon request; The length divided by the locking distance must be an even number. e.g. Lengths 0 mm, latching all 62.5 mm: 0 / 62.5: 4 b drylin N tool Telescopic system Locking mechanism Rail width M4 L Option Length [mm] L Fmax = 75 N (0 mm/l) 942 Online tools and more information 3D-CAD files, prices and delivery time online 943

47 Sp (h2) drylin N low profile guide drylin N low-profile guide Product range Accessories: Manual clamp drylin N low-profile guide Product range Accessories: End caps drylin N low profile guide Version NW KA N S K - drylin N Guide carriages of carriage Rail width Carriage length Manual clamp drylin N End cap Plugged Rail width Dr S Dp K3 C C1 C3 C2 T A a Part No. (h2) A a C C1 C2 C3 K3 M Sp Dp Dr Weight [Nm] [g] NW KA M M: Permissible torque of the complete system Order example: NW KA: Manual clamp for NW carriage Part No. S T For rail NSK-17 NSK-27 NSK- NSK NS NS NS-01- NS Order example: NSK-: end caps for rail size, bolted Easily assembled and disassembled by hand using a screw driver. Part No.: NSK End caps for rail size, screwed Part No.: NSK- 944 Online tools and more information 3D-CAD files, prices and delivery time online 945

48 drylin N low profile guide drylin N low-profile guide Ordering options for a complete system NK LLZ C5 = Complete system Carriage type (17/27//80) Amount of carriages Rail length [mm] Carriage options Rail options Available options: Rails Leave blank: Standard rail with holes UNGEORT: Rail without holes C5: mm: Only if hole spacing is not symmetrical Carriage Leave blank: Standard LLZ: Floating z-direction LLY: Floating y-direction LLYZ: Floating y- and z-direction P: Preload (max. 1 N) only available for sizes 17/27/ Carriage type 01: Clipped-on sliding element, plain hole 11: Overmoulded sliding element, plain hole 02: Clipped-on sliding element, threaded hole or threaded pin 12: Overmoulded sliding element, threaded hole or threaded pin 21: Solid plastic, plain hole 22: Solid plastic, threaded hole or threaded pin drylin N replacement liners (set) Material iglidur J Carriage type NW-01/02/27 NW-01/02-27P NW-01/02-27-LLY NW-01/02-27-LLZ NW-01/02- NW-01/02-P NW-01/02--LLY NW-01/02--LLZ NW NW LLY NW LLZ Part No. Sliding part set NEK NEK P NEK LLY NEK LLZ NEK-02- NEK-01--P NEK-02--LLY NEK-02--LLZ NEK NEK LLY NEK LLZ 946 Online tools and more information

49 drylin linear technology drylin T rail guide Robust linear guides Adjustable bearing clearance Wear resistant and durable Dimensions are identical to recirculating ball-bearing guides Lubrication and maintenance-free

50 drylin T rail guide Advantages Resistant to dirt, low vibration, low noise, long service life Lubrication-free rail guide drylin T recirculating ball bearing guides Same dimendions as most drylin T rail guide Product overview Dimensions are identical to most recirculating ball-bearing guides Profile rail with hard anodised surface All steel parts are made of durable stainless steel Clear, anodised aluminium carriage body drylin T rail guide were originally developed for applications in both automation and materials handling. The goal was to create a high performance, maintenance-free linear guide for use in the most diverse, even extreme environments. Their dimensions are identical to most recirculating ball guides. 100 % lubrication-free Adjustable bearing clearance Automatic clearance adjustment igh static load capacity Service life up to 50,000 km Resistant to dirt Low vibration and quiet Standard / with manual clamp Supplied preset and can be put into operation at once Manual adjustable clearance Manual clamp direct on carriage From page 955 Automatic Automatically adjustment of clearance after removal of the pre-load key The clearance will be adjusted automatically Page 957 Sliding elements in high-performance polymer iglidur J serve as a guide bearing and guarantee optimum running properties Typical application areas Mechanical engineering Wood working industry Machine tools andling Available from stock Detailed information about delivery time online. eavy Duty / Adjustable eavy Duty Used for extreme conditions (dirt, adhesive residues, chips, mud, etc.) Plastic sliding elements are fixed and are therefore permanent Including clearance adjustment Page 958 Compact Narrow guide carriage for small installation space Captive fixed plastic sliding elements Corrosion-free Page 960 End cap made of solid plastic or stainless steel lock pricing online No minimum order value. From batch size 1. Adjustable bearing clearance Max. +90 C Min. - C 7 carriage types Rail length up to 4,000 mm Service life calculation Miniature guide / Adjustable miniature guide Small compact design Easy to fit Individual clearance adjustment on carriage Page 962 Clamps Compact or heavy duty Available for sizes 15- mm olding force up to 500 N Page 961 Cleanroom certificated IPA Fraunhofer Free from toxins ROS 02/95/EC ESD-compatible (electronic discharge) ased on drylin T drylin SLT linear module From page Online tools and more information 3D-CAD files, prices and delivery time online 949

51 drylin T rail guide Application examples drylin T rail guide Online tools igh service life and food grade quality are also prerequisites for the application like insensitivity to pungent detergents and humidity. The adjustment of the pressing roller and the compensation of the imbalance of the grinding tools are implemented here with drylin T in place of recirculating ball-bearing guides. Expert for linear guides: System selection & service life calculation with CAD Configure and calculate linear bearings constantly expanded by new sizes and products Easily calculate the service life of your required linear guide and configure with a few clicks. Select a drylin system and add the relevant environmental parameters. Select the bearing size, carriage, number and position. Then enter the distance between the rails and the mounting. Define the coordinates for the drive location and the centre of gravity by clicking and dragging the coloured cross lines, or enter these via the keyboard. Define the weight, acceleration, and distance of the bearing and select a rail length. The results are displayed. The drylin T linear guide are used in these enveloping machines to guide an envelope suction opener that is mounted on one side. Due to the welding spatter and dust, the use of the extremely dirt-resistant drylin T linear guide system finds the balance between high service life and low costs. drylin CAD configurator: Generate complete 3D models for drylin linear technology to your specifications The igus CAD online configurator gives you the ability to design and save your linear guide as a system, individual components directly as a 3D model in all commonly used formats, or to have these sent by free of charge and without registration. drylin T rail guide with adjustable clearance change the height of the work table silently and precisely. Time saving: Reduced tool changing time due to this measuring system The gauge is guided on a drylin T profile. This solution works also without problems in dusty environment's. 950 Online tools and more information 3D-CAD files, prices and delivery time online 951

52 drylin T rail guide Design rules drylin T rail guide Technical data Installation notes The compensation of parallelism errors up to a maximum of 0.5 mm between mounted rails is possible with a fixed/ floating bearing. During installation, take care that the floating bearing has approximately the same clearance on both sides. In the adjacent designs you can see the version of the fixed / floating bearing system recommended by us. The mounting surfaces of the rails and carriages should be very flat (e. g. machined surface) to prevent twisting in the system. Small discrepancies in the mounting surfaces can be compensated up to a certain amount (0.5 mm) by a greater clearance adjustment. The clearance adjustment is possible only in unloaded state. If you have any questions on Version with floating bearing in z-direction 1 Rail 2 Slide elements 3 Carriage with fixed bearings 4 Carriage with floating bearings LLZ or LLY orizontal version with floating bearing in z-direction Guide rail Material Aluminium, extruded section Material AlMgSi0.5 Coating ard-anodised aluminium, 50 µm ardness 500 V Guide carriages ase structure Aluminium, extruded section Material AlMgSi0.5 Coating Anodised aluminium Sliding pads Maintenance-free plain bearing iglidur J olts, springs Stainless steel End cap Plastic (TW-01/TWA-01), steel (TW-02) Max. surface speed 15 m/s Temperature range C to +90 C design and / or assembly, please make use of our technical Table 01: drylin technical data support. orizontal version with floating bearing in the y-direction and lateral carriage C 0Y C 0(-Y) C 0Z M 0X M 0Y M 0Z [kn] [kn] [kn] [Nm] [Nm] [Nm] M 0X C 0Y Technical details on floating bearings Page 879 The 2:1 Rule Page (TWE) C 0Z Z M 0Z Installation drylin T linear guide system Make sure to assemble the side of the carriage saying Reset Clearance onto the rail first (see picture) (TWE) /02-01-/02-/ M0Y Y C 0(-Y) 01-/ Table 02: drylin permissible static load capacity Diagram 01: Marking of the directions 10,000 1,000 TW series, adjustable clearance TWA series, automatic Tightening torque for drylin connections between metal parts Metric thread (Da) M3 M4 M5 M10 Torque Recommended torque [Nm] [Nm] Floating bearings clearance for drylin T miniature guide LLZ: LLY: Floating bearing in z-direction Floating bearing in y-direction Floating TW TW TW TW bearings clearance LLY LLZ Load [N] Speed [m/s] TK TK TK-01-/02- TK-01-/02-/03 - TK-01-/02- TK TK TK y-direction z-direction 10 minimal screw in depth for aluminium and zinc parts: 1.5 x Da Table 02: drylin permissible static load capacity 952 Online tools and more information 3D-CAD files, prices and delivery time online 953

53 drylin T rail guide drylin T rail guide Product range Linear guides drylin T rail guide Product range Guide carriage manual adjustable clearance drylin T rail guide Complete system Page 964 Complete system Page 964 Options Options TS TW LLY TS-01 TS-11 Guide rail Installation size Rail length [mm] TW-01 C3 C C1 K2 C3 Complete Set Guide carriages Standard Installation size Floating bearing Curved rail profiles Page 878 Options: 5 Options: TS-01: Standard rail, hard anodised TS-11: Weight-reduced rail, clear anodised C2 K3 LLY: Floating bearing in y-direction LLZ: Floating bearing in z-direction ard anodised surfaces Page 874 A 2 h1 b K1 h a C5 C4 C6 A 1 Y X L A1 Z Part No. Weight L a C4 C5 C5 C6 C6 h h1 K1 for b ly lz Wby Wbz Max. 0.2 min. Max. Min. Max. screw [kg/m] DIN 912 [mm 4 ] [mm 4 ] [mm 3 ] [mm 3 ] TS , M4 22 6,4 4, TS , M ,570 11,5 1,456 1,067 TS , M ,1 6, TS-01- TS , , ,700 19,0 2,041 1,608 70,0,780 3,502 2,832 Standard hole pattern symmetric C5 = C6 For rails without mounting holes, please use part number suffix NO OLES Part No. Weight A C A1 A2 C1 C2 C3 1 5 K2- Max. tightening K3 for ±0.35 ±0.35 ±0.35 thread torque screw [kg] [Nm] DIN 912 TW TW-01- TW M M4 M5 TW M10 1 All elements can be ordered individually or as assembled TW-01--LLY: Standard guide carriage with manually adjustable clearance, installation size and floating bearing in y-direction TK : Complete system with two standard guide carriages type 01, installation size and standard guide rail, 500 mm length Can be combined with: Can be combined with: Technical data Technical data Page 953 Page 953 TW TWA TW-01-KA TW TW TS Online tools and more information 3D-CAD files, prices and delivery time online 955

54 drylin T rail guide drylin T rail guide Product range Guide carriage with manual clamp drylin T rail guide Product range Guide carriage automatic clearance adjustment drylin T rail guide Complete system Page 964 Complete system Page 964 Options Options TW KA TWA LLY C3 TW-01-KA C C1 K2 C3 Complete Set Guide carriages Standard Installation size Manual clamp TWA-01 C3 C C1 K2 C3 Complete Set Guide carriages Automatic version 5 Standard Installation size C2 K3 A 2 5 Floating bearing K3 Other dimensions as standard design Options: TW Page 957 LLY: Floating bearing in y-direction LLZ: Floating bearing in z-direction A 2 C2 Ky Dk Kz A A1 1 Y X Z A A1 1 Y X Z Part No. Kz Ky Dk Clamp thread TW KA TW-01--KA TW-01--KA TW-01--KA All elements can be ordered individually or as assembled TW-01--KA: Guide carriage with manually adjustable clearance, installation size and manual clamp TK-01--KA-2-500: Complete system with two standard guide carriages type 01 with manual clamp, installation size and standard guide rail, 500 mm length The clamp thread was developed for simple tasks. The creep behaviour of the clamped plastic causes a reduction in clamping force over time (up to 70 %). Therefore no safety-relevant parts may be clamped. Please contact our technical consultant, if you require other options for the clamping. Part No. Weight A C A1 A2 C1 C2 C3 1 5 K2- Max. tightening K3 for ±0.35 ±0.35 ±0.35 weight torque screw [kg] [Nm] DIN 912 TWA TWA-01- TWA M M4 M5 TWA M10 1 All elements can be ordered individually or as assembled TW-01--LLY: Guide carriage with automatic clearance adjustment, installation size and floating bearing in y-direction TKA : Complete system with two standard guide carriages type 01, automatic clearance adjustment, installation size and standard guide rail, 500 mm length Can be combined with: Can be combined with: Technical data Technical data Page 953 Page 953 TS TS Online tools and more information 3D-CAD files, prices and delivery time online 957

55 drylin T rail guide drylin T rail guide Product range Guide carriage heavy duty for extreme conditions Complete system Page 964 drylin T rail guide Product range Guide carriage heavy duty for extreme conditions, with adjustable clearance Complete system Page 964 drylin T rail guide TW TW TW-02 C 5 Complete Set Guide carriages eavy duty Installation size TW-12 C 5 Complete Set Guide carriages eavy Duty, precise Installation size Floating bearing upon request A2 C2 K3 A2 C2 K3 K2 A 1 A 1 K2 Y X Z Part No. Weight 5 A C A2 C2 1 K2 K3 ±0.35 ±0.35 [kg] TW-02- TW-02- TW M10 M5 All elements can be ordered individually or as assembled TW-02-: eavy duty guide carriage, installation size TK : Complete system with two heavy duty carriages type 02, installation size and standard guide rail, 500 mm length Part No. Weight 5 A C A2 C2 1 K2 K3 ±0.35 ±0.35 [kg] TW M5 All elements can be ordered individually or as assembled TW-12-: eavy duty guide carriage, with adjustable clearance, installation size TK : Complete system with two heavy duty carriages, precise type 12, installation size and standard guide rail, 500 mm length Can be combined with: Technical data Page 953 Can only be combined with: Technical data Page 953 TS TS-01- TS Online tools and more information 3D-CAD files, prices and delivery time online 959

56 drylin T rail guide drylin T rail guide Product range Compact for tough applications drylin T rail guide Product range Accessories: Manual clamp drylin T rail guide Complete system Page 964 Compact design Plastic clamping elements A lg Complete system Page 964 TW a b TWM TW-03 C C1 C2 Complete Set Guide carriages Compact Installation size TWM-11 C2 K2 A2 C c K Manual clamp Compact Installation size Part No. Clamp force A a A2 1 2 K K2 C C2 c lg b [N] TWM M TWM M A2 Y X TWM-11- TWM A K2 Z 1 5 Standard version With clamping components 2 K2 A1 C C2 1 Complete system Page 964 A A2 Part No. Weight A C A1 A2 C1 C2 1 5 K2 Max. tightening TWM-01 bg TWM ±0.35 ±0.35 torque [kg] [Nm] TW All elements can be ordered individually or as assembled TW-03-: Compact guide carriage, installation size lg Manual clamp Standard Installation size TK : Complete system with two compact guide carriages type 03, installation size and standard guide rail, 500 mm length Part No. Clamp force A A2 1 2 K2 C C2 lg bg TWM-01- [N] Can only be combined with: Technical data Page 953 Can only be combined with: TS-01- TS-11- TS Online tools and more information 3D-CAD files, prices and delivery time online 961

57 drylin T rail guide drylin T rail guide Product range Low-profile guide rails drylin T rail guide Product range Adjustable miniature guide carriage drylin T rail guide Complete system Page 964 Complete system Page 964 TS TW E TS-04 b Complete Set Guide rail Miniature Installation size TWE-04 Complete Set Guide carriages Adjustable clearance Miniature Installation size K1 igh corrosion resistance by C5 C4 C6 C5 C C1 L C4 C6 use of re-coating finish L K1 h1 h A K2 C2 TS TS TS A1 a K3 5 A2 b TS C C1 Part No. Weight A C A1 A2 C1 C2 1 5 K2 thread K3 for screw TWE TWE [g] ± ±0.3 ±0.35 ±0.35 DIN M3 M M3 M2 A K2 5 C2 y Press in, turn, snap into place A 2 x z 1 Curved rail profiles h a h1 Page 878 Part No. Weight L a C4 C5 C5 C6 C6 h h1 K1 for b ly lz Wby Wbz Max. 0.2 min. Max. Min. Max. screw [kg/m] DIN 912 [mm 4 ] [mm 4 ] [mm 3 ] [mm 3 ] , M , M , M , M3 17 2,4 1, Miniature carriage standard TW-04 A1 a K3 Part No. Weight A C A1 A2 C1 C2 1 5 K2 tightening K3 for ± ±0.3 ±0.35 ±0.35 thread torque screw [g] [Nm] DIN 912 TW TW TW TW M2 M2 M3 M M2 M2 (M3) 77) M2 (M3) 77) 77) (M...) = bored out Tool: screwdriver with 3 mm edge wide Can be combined with: TS Right side: setting the height clearance Left side: setting the lateral clearance Technical data Page Online tools and more information 3D-CAD files, prices and delivery time online 963

58 drylin T rail guide Ordering options drylin T rail guides Adjusting the clearance drylin T rail guide complete system: drylin T adjusting the clearance drylin T linear guide always require a minimum Options Length TK(A) KA-2-00 Complete set options: TK: Complete set with guide rail and carriage TKA: Complete set automatic version clearance between carriage and rail They are supplied with pre-adjusted clearance ready for installation. If you have special requirements, please indicate this in your order TKE: Complete set, version with adjustable clearance whether particularly limited or extended bearing clearance : 01: Standard is required. If necessary, the clearance of the guide carriages can be readjusted. This should always take place when there TW TW-12-02: eavy Duty is no load on the carriage. Complete Set (Automatic version) design Installation size Order example: Options Number of carriages Rail length [mm] 04: Miniature Options: blank: Standard -LLY: Guide carriage with floating bearing in y-direction -LLZ: Guide carriage with floating bearing in z-direction -KA: Guide carriage with manual clamp (only for 01) 1. After removing the protective end cap, loosen the locknuts. Width across flats: SW 5 for TW-01-15, TW-01- and TW-12- SW 7 for TW-01- and TW Adjust the bearing clearance for the 3 guide points with an Allen key. Width across flats: 1.5 mm for TW-01-15, TW-01- and TW Lateral guide: less clearance + Larger clearance TK KA-2-00-LLY: Complete set comprising two standard guide carriages type 01, installation size mm for TW-01- and TW-01- with manual clamp and one standard guide rail, 2,000 mm long, all carriages with floating bearing in y-direction Linear rail info: 3. Check the clearance of the carriage after adjusting the 3 levels. If it is sufficient, tighten the locknuts and fit the end cap. 3 Optional rails without holes available (suffix NO OLES ). Vertical guide left Clear anodised rails optionally available (suffix "CA": e.g. TS CA). Standard hole pattern symmetric C5 = C6 4. There is a danger that excessive reduction of the clearances can seize the sliding elements and that the clearance cannot be reset simply by loosening 4 the adjustment screws. The sliding elements are then released by pressing the reset button on the opposite Vertical guide right end. Use the correct size pin for this purpose: 2.5 mm for TW-01-15, TW-01- and TW mm for TW-01- and TW-01- drylin T replacement liners (set) Material iglidur J Page 141 Material iglidur A180 Page 363 drylin T end caps for series 01 guide rail holes: Guide carriages Part No. Sliding part set Rail Part No. End cap TW TEK TS TSZ TW-01- TEK-01- TS-01- TSZ-0101 TW-01- TEK-01- TS-01- TSZ-0101 TW-01- TEK-01- TS-01- TSZ-0101 TW-02- TEK-02- When using the end caps, screws with a low screw head TW-02- TEK-02- must be used to attach the rail. TW-02- TEK-02- TW-12- TEK-12- TW TEK TW TEK TW TEK Online tools and more information 3D-CAD files, prices and delivery time online 965

59 drylin T rail guide drylin T rail guides Adjusting the clearance drylin T rail guides Assembly drylin T rail guide drylin T Automatic adjusting the clearance For the exact calculation of the drylin T linear guide system it is essential to find out whether the position of the forces Recommended procedure 1st step: The drylin T Automatic series offers an automatic is within the allowable limits, and if the sliding pad where Select the orientation adjustment of the clearance. A readjustment takes place the highest forces occur is not overloaded. horizontal automatically in steps of 0.1 mm, in case varying load occur The calculation of the necessary driving force and the 1 rail and 1 carriage in the clearance direction. maximum permissible speed is important. Each orientation 1 rail and 2 carriages 1. The system will be delivered with 3 red keys which are already plugged in. They are necessary for mounting the 1 requires a different formula for calculation. Please note that the following calculations do not contain 2 rails and 4 carriages lateral 1 rail and 1 carriage carriage onto the rail. If these keys are removed, then the any guarantees with regard to impact loads and acceleration 1 rail and 2 carriages keys should be replaced into the openings and turned locked forces. The drive should always take place precisely in 2 rails and 4 carriages right by 90. The clearance of the glide bar is cancelled. 2. When the carriage is on the rail, loosen the keys by 2 the x direction, as additional loads and increased drive resistances (danger of seizing) occur (for e. g. in crank drive) that cannot be ignored. vertical 1 rail and 1 carriage 1 rail and 2 carriages turning them left 90 and remove them. The clearance 2 rails and 4 carriages will be adjusted automatically. 3. Test the clearance of the carriage using slight to and fro movements. A fine tuning can happen during this 3 Variables in the calculation: Fa: Drive Force [N] Fs: Applied mass [N] 2nd step: Check to see whether the offset distances of the applied forces are within the permissible values procedure. unlocked Fy, Fz: earing load in y- or z-direction [N] 3rd step: 4. You can remove the carriage at any time. In order to do so, simply replace the keys back into the openings by pushing and turning through 90 degrees (see step 1). 4 sx, sy, sz: Location of the centre of gravity in x-, y- or z-direction ay, az: Location of the driving force [mm] Calculate the necessary drive force 4th step: in y- or z-direction [mm] Calculate the maximum bearing load in y- and wx: Distance between carriages, on a rail [mm] z-directions LX: Zm: Constant based on the installation size [mm] Constant based on the installation size [mm] 5th step: Y0: Constant based on the installation size [mm] Check out the maximum bearing load of the most b: Distance between guide rails [mm] strongly affected bearing with the load calculated in step μ: Coefficient of friction No. 4. µ = 0 for static loads, µ = 0.2 for dynamic loads 6th step: ZW: Number of carriages per rail Determination of the maximum permitted speed for the load from step No. 4 The constant values [mm] Coefficient Part No. TW TW-01- TW-01- TW-01- Lx Zm Y rail, 1 rail, 2 rails, 1 carriage 2 carriages 3-4 carriages K1 (ay + Y0)/Lx (ay + Y0)/Wx (ay + Y0)/Wx K2 (sy + Y0)/Lx (sy + Y0)/Wx (sy + Y0)/Wx K3 az/lx az/wx az/wx K4 sx/lx sx/wx sx/wx K5 sz/lx sz/wx sz/wx K6 (sy + Y0)/Zm (sy + Y0)/Zm (sy + Y0)/b K7 sz/zm sz/zm (sz/b) Online tools and more information 3D-CAD files, prices and delivery time online 967

60 drylin T rail guide drylin T System design drylin T Mounting version horizontal drylin T rail guide Permissible mean speed [m/s] TW-01- TW-01- TW-01- TW earing load (centre) [N] Diagram 04: Determination of the maximum permitted speed for the load Part No. Fymax, Fzmax [N] TW ,000 TW-01-3,700 TW-01-5,000 TW-01-7,000 Table 03: Maximum permissible load per sliding element 1,000 2,000 sx Floating bearing Maximum permitted distances: Variation: 1 rail, 1 carriage sy + sz < 2 Lx Y0 ay + az < 2 Lx Y0 sy < 5 Zm sz < 5 Zm sz Fs b ay ay Fa Fa Fs az az Maximum permitted distances: sx sz Fixed bearing z WX y Zero point Variation: 1 rail, 2 carriages Variation: 2 rail, 4 carriages sy + sz < 2 Lx Y0 ay + az < 2 Lx Y0 y x x z Zero point 1st step: Select version 1 rail and 1 carriage 1 rail and 2 carriages 2 rails and 4 carriages 2nd step: Check to see whether the maximum distances of the applied forces are within the permissible values (see maximum permissible distances). 3rd step: Calculate the necessary drive force 3.1 Centre of gravity in x- und z-direction outside of the carriage(s) µ Fa 1 = Fs 1 2µ K Centre of gravity in z-direction outside of the carriage(s) Fa 2 = 2µ K 7 Fs 1 2µ K Centre of gravity in x-direction outside of the carriage(s) Fa 3 = 2µ K 4 Fs 1 2µ K 3 2µK 1 If the position of the centre of gravity is not specified: Fa: MAX (Fa 1, Fa 2, Fa 3 ) 4th step: Calculate the maximum bearing load 4.1 Maximum bearing load in y-direction Fy max = 2 Fs ( 2 K ) Zw Zw ( K 2Fa K ) + 1 Zw Maximum bearing load in z-direction Fz max : 4Fa K 3 Zw Online tools and more information 3D-CAD files, prices and delivery time online 969

61 drylin T rail guide drylin T Mounting version lateral drylin T Mounting version vertical drylin T rail guide 1st step: Select version 1 rail and 1 carriage 1 rail and 2 carriages 2 rails and 4 carriages Maximum permitted distances: Variation: 1 rail, 1 carriage sy + sz < 2 Lx Y0 ay + az < 2 Lx Y0 sy < 5 Zm sz < 5 Zm Maximum permitted distances: Variation: 1 rail, 1 carriage sy + sz < 2 Lx Y0 ay + az < 2 Lx Y0 sy < 5 Zm sz < 5 Zm 1st step: Select version 1 rail and 1 carriage 1 rail and 2 carriages 2 rails and 4 carriages 2nd step: Check to see whether the maximum distances of the applied forces are within the permissible values (see maximum permissible distances). x z y sx sy az 2nd step: Check to see whether the maximum distances of the applied forces are within the permissible values (see maximum permissible distances). Zero point Fa 3rd step: Calculate the necessary drive force First two calculations must be made: Fa 1 = (1 + 2 K 6 ) µ Fs 1 2µ K 1 az Fs ay Fa sy Fs ay Zero point x 3rd step: Calculate the necessary drive force First four calculations must be made: Fa 1 = 2µ (sz + sy + Y0) wx Fs 2µ (az + ay + Y0) wx Fa 2 = (2 K 4 +2 K 6 ) µ Fs 1 2µ K 1 2µ K 3 Maximum permitted distances: z y Maximum permitted distances: Fa 2 = 2µ (sz + sy + Y0) wx Fs 2µ (az + ay + Y0) wx The drive force Fa corresponds to the calculated maximum value: Variation: 1 rail, 2 carriages Variation: 2 rail, 4 carriage Variation: 1 rail, 2 carriages Variation: 2 rail, 4 carriage Fa 3 = 2µ (sz sy Y0) wx Fs 2µ (az ay Y0) wx Fa: MAX (Fa 1, Fa 2 ) sy + sz < 2 wx Y0 ay + az < 2 wx Y0 sy + sz < 2 wx Y0 ay + az < 2 wx Y0 Fa 4 = 2µ (sz + sy + Y0) + wx Fs 2µ (az + ay + Y0) + wx 4th step: Calculate the maximum bearing load 4.1 Maximum bearing load WX The drive force Fa corresponds to the calculated maximum value: Fa: MAX (Fa 1, Fa 2, Fa 3, Fa 4 ) in y-direction Zero point Fy max = Fs K 6 + 2Fa K 1 Zw Zw 2 Fixed bearing sx sy b Floating bearing 4th step: Calculate the maximum bearing load 4.1 Maximum bearing load 4.2 Maximum bearing load in z-direction Fz max = 2 Fs ( 2 K ) + 4Fa K 3 Zw Zw Zw 2 ay az Fa Fs Fixed bearing az ay Fa - Zero point in y-direction Fy max = Fa ay+y0 Fs K 2 2 wx Zw Maximum bearing load in z-direction b Floating bearing WX sy Fz max = Fa az Fs K 5 4 wx Zw 2 z x y sz Fs x y z 970 Online tools and more information 3D-CAD files, prices and delivery time online 971

62 My sketches 972 Online tools and more information

63 drylin linear technology drylin R round shaft guide Lubrication-free drylin liners Resistance to dust and dirt Low friction Extremely quiet operation Many adapter and housing options

64 drylin R round shaft guide Advantages Extremely wear-resistant, robust in challenging environments and lightweight Alternative to ball bearings ard-anodised aluminium shafts guarantee optimum running properties Shafts made from steel, stainless steel or carbon fibre Round shaft and supported round shafts available Linear adapter made from solid plastic or aluminium Lubrication-free round shaft guide drylin R drylin R round shaft guide are based on extremely wear-resistant polymers specially developed for the linear technology. The dimensions are compatible with standard ball bearings. The special geometry guarantees reliability even in extreme environments. 100% lubrication-free Dimensionally interchangeable with standard recirculating ball bearings Large variety of choice in housing shapes Shafts, shaft blocks and accessories available from stock Replaceable liners VA stainless steel housing available drylin R round shaft guide Product overview Dimensions correspond to standard for recirculating ball bearings with replaceable liners Liners and pressfit bearings Made from iglidur high-performance polymers Easy to fit Unaffected by dirt and dust Low friction, optimised wear quality Page 982 Linear plain bearings Dimensionally interchangeable with standard recirculating ball bearings Extremely lightweight solid polymer bearing Aluminium or stainless steel adapter with liner made from iglidur Page 1000 Complete housing made from anodised aluminium drylin liners made from lubrication-free iglidur high performance polymers Typical application areas Agricultural machinery Automotive Medical technology Facade construction Packaging industry Available from stock Detailed information about delivery time online. Closed pillow blocks Pre-assembled linear housing with drylin liners Material: anodised aluminium Fixed and floating bearing version available Page 1014 Linear and housing bearings, open design For supported shafts Round or mounted design Clearance adjustment (optional) Page 1021 lock pricing online No minimum order value. From batch size 1. 5 different liner materials Up to Ø 60 mm More dimensions upon request. ard anodised aluminium tubes - lightweight Imperial dimensions available From page 1456 Service life calculation Flange bearings Pre-assembled housing with drylin liners Round or square flange Tandem flange housing for additional stability Page 1026 Quad block Closed and open design Torque resistant quad block housing with 4 linear adapters Also available as tandem housing Page 10 Cleanroom certificated IPA Fraunhofer Free from toxins ROS 02/95/EC ESD-compatible (electronic discharge) 974 Online tools and more information 3D-CAD files, prices and delivery time online 975

65 drylin R round shaft guide Application examples drylin R round shaft guide Online tools drylin R linear plain bearings on supported aluminium shafts are used in this grinder to guide the cutting table. The drylin components stand for extreme dirt resistance, accurate guidance and smooth operation. Saw mill: linear guide with iglidur J plastic liner for the angle stops. The iglidur J is best suited for most linear applications due to its low wear and low friction properties. Expert for linear guides: System selection & service life calculation with CAD Configure and calculate linear bearings constantly expanded by new sizes and products Easily calculate the service life of your required linear guide and configure with a few clicks. Select a drylin system and add the relevant environmental parameters. Select the bearing size, carriage, number and position. Then enter the distance between the rails and the mounting. Define more relevant parameter of the guidance and select a rail length. The results are displayed. Download the online tools App The machine now runs entirely free of troubles for multiple years with drylin RJUM-01 linear bearings despite the extremely heavy - duty operation. y changing over to the drylin R linear bearing, the maintenance rate of this compaction unit could be extended by two years, despite high stressing from powder particles and abrasive agents. drylin CAD configurator: Generate complete 3D models for drylin linear technology to your specifications The igus CAD online configurator gives you the ability to design and save your linear guide as a system, individual components directly as a 3D model in all commonly used formats, or to have these sent by free of charge and without registration. Since the sliding bearing should be maintenance free, precise, compact, durable and very resilient, liners were mounted directly in the passages of the machine frame. The production line should be adjusted without setup time being required. drylin linear guides, which enable precise and fast adjustment, were used for this. 976 Online tools and more information 3D-CAD files, prices and delivery time online 977

66 drylin round shaft guide Technical data drylin R round shaft guide Technical data drylin R linear plain bearings lint and coarse dirt as drylin. The patented design of the Serie L1 - low-clearance press-fit bearings The drylin standard round bearing surface using individual slide pads connected by The series L1 plain bearings are composed of the iglidur bearings consist of a thin film sections, provides performance benefits for dirty L100 bearing material, an extremely wear-resistant plastic interchangeable iglidur J environments. Dirt, even when it becomes wet on the shaft, is compound. They are sub-divided into a press-fit area liner that is manufactured to wiped away by the individual glide pads and is moved into the and a gliding range. The gliding range is composed of be a mechanical fit into an open areas. The running sections of the drylin bearing then individual crossbars which are linked to each other by thin anodised aluminium adapter. glide on the shaft that has been cleared of all contaminants. film bridges. These film bridges compensate the expansion The axial securing of the liner of the bearing through heating or moisture. This separation is carried out by a snap ring Split linear bearings enables the almost clearance free design of the bearings, groove. drylin R linear plain bearings, made from solid Applications that are on the edge of technical feasibility as there is no clamping of the shaft. The cylinder-shaped igh static compressive strength polymer, are dimensionally equivalent to standard ball or in extremely harsh environments often require frequent press-fit area is also visually very distinct from the gliding Good chemical resistance bearings. They are made entirely out of wear resistant replacement of the linear bearings. In many cases, drylin range. The function of this area, which shows a distinct Resistant to dirt iglidur J material and can offer technical advantages in can give a multiple increase in the service life. owever, clearance compared to the shaft, is to fix the bushing firmly Also suitable for soft and rough shafts addition to the clear price advantage. Thus, applications in extreme applications, replacement of the bearings is in the housing by means of a press fit in which machine parts are primarily stainless steel, i.e. necessary, even with drylin. drylin linear bearings can Coefficients of sliding friction food and filling equipment, are well suited for the use of provide considerable cost reductions in such cases as only Compressive strength Plain bearings of the L1 series are designed for dry oper- solid plastic bearings. An additional weight-saving is also the polymer bearing liner has to be replaced. This often iglidur plain bearings are homogeneously filled with solid ation against steel. The best results are attained with sur- easily obtained. means a reduction of more than 90 % in replacement part lubricants. In this way, lubricants cannot be removed, even face finishes from 0.3 to Ra. The coefficients of sliding oth versions are designed for the installation in housing costs. In addition the dismantling of the shafts is avoided. at high loads. The iglidur L100 material allows an average friction reduces with increasing load. Typical values in dry bores with the tolerance 7. The mounting is done like in ball The split bearings are easily pulled off the housing and static surface pressure of 70 MPa. owever, only half of operation are 0.2 to 0.3. ut the value can be higher with bearings with circlips according to DIN 471/472. opened. The slotted liner can be simply mounted on the the bearing surface can carry loads and this is taken into less suitable shafts. The narrow design of the 02 design series, is pressfit shaft. Clip a new bearing liner over the shaft, put the two account in the calculation. or bonded into the 7-housing. Standard commercial housing halves together, install done! With this product line 2-component adhesives can be used for this purpose. of split drylin bearings, installation times can be reduced Surface speeds Operating temperatures to a minimum. The following table shows possible surface speeds of L1 Temperatures affect the compressive strength, the wear Dirt, dust, fibres bearings. and the securing of the bearing in the housing. A firm fit An important feature of all the available linear bearings is their Extremely high wear resistance could be determined in all the tests up to a temperature of tolerance of dirt. For most the application of wipers Low coefficient of friction 70 C. At higher temperatures, an additional securing of the or seals is recommended for even low dirt accumulation. Vibration-dampening bearing is recommended. With effective securing, L1 plain No other system features such a high safety with dust, iglidur L100 Rotating Oscillating Linear bearings could also be used at temperatures over +1 C. Continuous [m/s] Short-term [m/s] Table 02: Maximum surface speed for iglidur L100 The all-rounder iglidur J The specialist iglidur J0 The extreme iglidur X The marathon runner iglidur E7 The FDA-compliant iglidur A180 Application temperature -50 to +90 C -50 to +90 C -100 to +0 C -50 to +70 C -50 to +90 C est coefficient of friction with steel shaft aluminium, hard anodised steel hard chrome-plated steel/stainless steel shaft stainless steel shaft Contact resistance > Ωcm > 10 8 Ωcm < 10 5 Ωcm > 10 9 Ωcm > Ωcm Moisture absorption 1.3 % weight 0.7 % weight 0.5 % weight < 0.1 % weight 0.2 % weight Maximum service life aluminium, hard anodised aluminium, hard anodised hardened stainless steel steel/stainless steel shaft stainless steel shaft Possible shafts all shaft materials aluminium, hard anodised hardened stainless steel steel/stainless steel shaft all shaft materials Permissible stat. surface pressure 35 MPa 23 MPa 150 MPa 18 MPa 28 MPa Part No. JUM-... J0UM-... XUM-... E7UM-... A180UM-... Material properties: iglidur J Page 141 iglidur J0 Page 235 iglidur X Page 245 iglidur E7 Page 1494 iglidur A180 Page 363 iglidur L100 Page 1495 iglidur L100 Application temperatures Minimum C Max. long-term +100 C Maximum, short-term +190 C Table 03: Temperature limits for iglidur L Online tools and more information 3D-CAD files, prices and delivery time online 979

67 drylin R round shaft guide Design standards drylin R round shaft guides Installation instructions Floating bearings for linear plain bearing drylin R linear plain bearings in the 03 design series offer great advantages in applications with parallel shafts. y their geometry, they are able to compensate for alignment and parallelism errors and should be used on the shaft located furthest from the drive mechanism. The design provides a spherical area on the outside diameter of the aluminium adapter for self-alignment. Reductions in load capacity are prevented, since the shaft always lies on the total projected surface. Due to the even load distribution over the entire bearing, edge loads are not possible with the self-aligning drylin linear bearings. In order to compensate for parallelism errors between two shafts, the outer diameter is designed to be smaller than the housing bore diameter by 0.2 to 0.3 mm (depending on the size). With the use of mounted O-rings, these bearings have an elastic bearing seat. The clearance between the bearing and housing allows for the maximum compensation of possible shaft miss-alignment. The drylin R self-aligning bearings are supplied hard anodised. These surfaces guarantee the highest wear resistance if the aluminium bearing moves in the housing during compensation adjustments. Another option is the housing bearing in the OJUM-06 LL and RJUM-06 LL design series. The mounting of the bearing allows a parallelism adjustment between the shafts by ±3 mm. The particular suspension of the supporting housing on an axis running in the z-direction enables an angular error compensation of up to 3.5. Eccentric forces To ensure successful use of maintenance-free drylin linear bearings, it is necessary to follow certain recommendations: If the distance between the driving force point and the fixed bearings is more than twice the bearing spacing (2:1 rule), a static friction value of 0. can theoretically result in jamming on the guides. This principle applies regardless of the value of the load or drive force. The friction product is always related to the fixed bearings. The greater the distance between the drive and guide bearings, the higher the degree of wear and required drive force. Failure to observe the 2:1 rule during a use of linear slide bearings can result in uneven motion or even system blockage. Such situations can often be remedied with relatively simple modifications. If you have any questions on design and/or assembly, please contact our application engineers. Floating Fixed bearing bearing 2 x 1x drylin R shaft guides are designed for completely lubrication-free operation. The dimensions of the respective linear adapter and housing meet the standard for recirculating ball bearings. During assembly, please note the following installation instructions: Construction tips for drylin linear plain bearings: The values for "Fmax." relate to the performance of the iglidur liners made from high-performance plastics and cannot be used as only selection tool for the calculation of an application. The maximum carrying capacity of the entire bearing system depends on the geometry, housing shape, the housing material, the connection including the screws used and requires a separate inspection. For a detailed analysis, please use our online configurator at Liners: JUM, XUM, J0UM, JUMO, J0UMO, XUMO, JUI, JUIO, E7UM, E7UMO Interlocking clip-on in the housing bore Axial securing is given by a snap ring groove Torque protection through engagement of the safety pin in hole ø z Pressfit bearings: WLM, WLFM Installation by pressing into the 7 housing bore Assembly instructions, Page 57 Recommended tolerance for the shaft: h6-h10 Surface roughness [Ra]: Guide shafts round/supported shafts Page 1041 Recommended housing bore 7 Linear plain bearing RJUM-01/03, TJUM-01/03, RJM, RJMP, RJ260(U)M02, pressfit bearing WLM, WLFM Linear plain bearings: RJUM-01, RJUM-11, RJUM-ES, TJUM-01, RJUM-03, TJUM-03, RJUI-01, RJUI-03, TJUI-01, TJUI-03 Secured by DIN 471 or 472 circlips, metric types (not included in delivery) Solid plastic bearings: RJM, RJI-01 Fastening with circlips according to DIN 471 or 472 (not included in delivery) The E9 inner tolerance applies only after the press-fit Figure 03: The 2:1 rule OJUM-06-LL RJUM-06-LL Solid polymer bearings: RJMP Easy assembly by soft press-fit Secured by DIN 471 or 472 circlips, metric types (not included in delivery) Linear plain bearings: RJUM-02 Secured by press-fit in steel housing bore 7 or aluminium housing bore K7 Alternatively, the adapter can be glued with commercially available 2-component adhesive into a housing Compact bearing: RJ260 (UM-02) Axial saving and press fit into housing bore 7 Alternatively, the adapter can be glued with commercially available 2-component adhesive into a housing Linear plain bearings: OJUM-01, OJUM-03, OJUI-01, OJUI-03 Secure the bearing with setscrews (not included in delivery) Page 1021 Page 10 Series RJUM-03 / OJUM-03 ±0.5 y defined installation clearance and externally Series RJUM-06-LL/OJUM-06-LL ±3.5 mounted O-rings, the self-aligning drylin R bearings Table 04: Compensation of misalignment errors of the type series 03 can compensate parallelism errors. The spherical drylin adapter can compensate for parallelism errors. A hard-anodisation protects the aluminium adapter from wear. Series RJUM-03/OJUM-03 ±0.1 mm Series RJUM-06-LL/OJUM-06-LL ±3.0 mm Table 05: Compensation of parallelism errors Quad block: RQA, RGA Tandem design: RTA The bearing in the housing is secured by DIN 472 circlips Linear housing: RGAS The bearing in the housing is secured by DIN 471 circlips Quad block: OQA, OGA, Linear housing: OGAS, Tandem design: OTA The bearings of the housings are secured by set screws Pillow block: RJUM/E/T-05, RJUM-06/-LL, OJUM/E-06/-LL, Flange housing: FJUM/T-01/02 Quad lock: RGA, OGA Tandem design: RTA, OTA Linear bearing: RGAS, OGAS Mounting screws of the housing DIN Circlips according to DIN Online tools and more information 3D-CAD files, prices and delivery time online 981

68 r b1 drylin R round shaft guide drylin R liners Product range Closed, long design for round shafts made from iglidur J (all-rounder) drylin R liners Product range Long, open design for supported shafts made from iglidur J (all-rounder) drylin R round shaft guide J U M J U M O iglidur J Liner Metric Standard iglidur J Liner Metric Open Standard t f b1 r t t f t d2 d2 Y Y 2:1 Z Y Y 2:1 Z The "all-rounder" for all shaft surfaces in the 78) According to igus testing method Page 1038 The all-rounder for all shaft surfaces in the 78) According to igus testing method Page 1038 indoor and outdoor use Please note: installation instructions Page 981 indoor and outdoor use Please note: installation instructions Page 981 min. -50 C min. -50 C max. +90 C max. +90 C -Tolerance 78) d2 b1 r t Z Weight Part No. -Tolerance 78) d2 b1 r t Z Weight Part No. [g] [g] JUM JUMO JUM JUMO JUM JUMO JUM JUMO JUM JUMO JUM JUMO JUM JUMO JUM JUMO JUM JUMO ) JUM ) ousing bore for liner JUM-01 dimensions [mm] Shaft di r t f Z Part No. / 2 ousing bore for liner JUMO-01 dimensions [mm] Shaft di W r t f Z Part No. / 2 Ø 7 h Ø Z Ø 7 h r JUM JUMO JUM JUMO JUM JUM-01- Ø di JUMO JUMO-01- Ø di JUM JUMO JUM-01- JUM JUM-01- r JUMO-01- JUMO-01- JUMO Ø Z W JUM JUMO ) JUM ) 79) in two parts 79) in two parts Can be combined with: Can be combined with: Imperial dimensions Page 1456 RJUM-01/-03 TJUM-01/-03 RJUM-06/-06-LL FJUM-01/-02 OJUM-01/-03 OJUM-06/-06-LL Imperial dimensions Page Online tools and more information 3D-CAD files, prices and delivery time online 983

69 r b1 t drylin R round shaft guide drylin R liners Product range Long, closed design, precise for round shafts made from iglidur J (all-rounder) drylin R liners Product range Long, open design, precise for supported shafts made from iglidur J (all-rounder) drylin R round shaft guide J U M J U M O iglidur J Liner Metric Precise iglidur J Liner Metric Open Precise t f b1 r t f t d2 d2 Y Z Y Y 2:1 Z Max. bearing clearance reduced by 50% 78) According to igus testing method Page 1038 Max. bearing clearance reduced by 50% 78) According to igus testing method Page 1038 Increased bearing area: longer service life Please note: installation instructions Page 981 Increased bearing area: longer service life Please note: installation instructions Page 981 min. -50 C min. -50 C max. +90 C max. +90 C -Tolerance 78) d2 b1 r t Z Weight Part No. [g] JUM JUM JUM JUM-11- JUM-11- JUM-11- JUM-11- JUM Tolerance 78) d2 b1 r t Z Weight Part No. [g] JUMO JUMO JUMO JUMO-11- JUMO-11- JUMO-11- JUMO-11- JUMO ousing bore for liner JUM-11 dimensions [mm] Shaft di r t f Z Part No. / 2 ousing bore for liner JUMO-11 dimensions [mm] Shaft di W r t f Z Part No. / 2 Ø 7 h Ø Z Ø 7 h r JUM JUMO JUM JUMO JUM JUM-11- Ø di JUMO JUMO-11- Ø di JUM JUMO JUM-11- JUM JUMO-11- JUMO-11- Ø Z JUM r JUMO W Can be combined with: Can be combined with: RJUM-01/-03 TJUM-01/-03 RJUM-06/-06-LL FJUM-01/-02 OJUM-01/-03 OJUM-06/-06-LL 984 Online tools and more information 3D-CAD files, prices and delivery time online 985

70 drylin R round shaft guide drylin R liners Product range Short, closed design for round shafts made from iglidur J (all-rounder) drylin R round shaft guide J U M J0 U M iglidur J Liner Metric Compact t f r b1 t b1 r t drylin R liners Product range Long, closed design for round shafts made from iglidur J0 (the specialist) d2 Y Y 2:1 Z iglidur J0 Liner Metric Standard t f d2 Y Y 2:1 Z The allrounder for all shaft surfaces in the indoor 78) According to igus testing method Page 1038 The "specialist" with the best running performance 78) According to igus testing method Page 1038 and outdoor use Please note: installation instructions Page 981 on aluminium Please note: installation instructions Page 981 min. -50 C min. -50 C max. +90 C max. +90 C -Tolerance 78) d2 b1 r t Z Weight Part No. [g] JUM JUM JUM JUM-02- JUM-02- JUM-02- JUM-02- JUM JUM Tolerance 78) d2 b1 r t Z Weight Part No. [g] J0UM J0UM J0UM J0UM-01- J0UM-01- J0UM-01- J0UM-01- J0UM ousing bore for liner JUM-02 dimensions [mm] Shaft di r t f Z Part No. Ø 7 h Ø Z / 2 ousing bore for liner J0UM-01 dimensions [mm] Shaft di r t f Z Part No. Ø 7 h Ø Z / JUM J0UM JUM J0UM JUM JUM-02- JUM-02- Ø di J0UM J0UM-01- J0UM-01- Ø di JUM J0UM JUM J0UM JUM J0UM r JUM r Can be combined with: Can be combined with: RJUM-02 RJUM-05/RJUME-05 TJUM-05/RJUMT-05 FJUMT-01/-02 RJUM-01/-03 TJUM-01/-03 RJUM-06/-06-LL FJUM-01/ Online tools and more information 3D-CAD files, prices and delivery time online 987

71 b1 r t r b1 t drylin R round shaft guide drylin R liners Product range Long, closed design for round shafts made from iglidur E7 (the marathon runner) drylin R round shaft guide J0 U M O E7 U M iglidur E7 Liner Metric Standard t f drylin R liners Product range Long, open design for supported shafts made from iglidur J0 (the specialist) d2 Y Y 2:1 Z iglidur J0 Liner Metric Open Standard f t d2 Y Y 2:1 Z The "specialist" with the best running performance 78) According to igus testing method Page 1038 The "marathon runner" with an 8-times longer lifetime 78) According to igus testing method Page 1038 on aluminium Please note: installation instructions Page 981 on steel shafts Please note: installation instructions Page 981 min. -50 C min. -50 C max. +90 C max. +70 C -Tolerance 78) d2 b1 r t Z Weight Part No. [g] J0UMO J0UMO J0UMO J0UMO-01- J0UMO-01- J0UMO-01- J0UMO-01- -Tolerance 78) d2 b1 r t Z Weight Part No. [g] E7UM E7UM E7UM E7UM-01- E7UM-01- E7UM-01- E7UM-01- E7UM ) E7UM ) ousing bore for liner J0UMO-01 dimensions [mm] Shaft di W r t f Z Part No. / 2 ousing bore for liner E7UM-01 dimensions [mm] Shaft di r t f Z Part No. / 2 Ø 7 h r Ø 7 h Ø Z J0UMO E7UM J0UMO E7UM J0UMO J0UMO-01- Ø di E7UM E7UM-01- Ø di J0UMO E7UM J0UMO-01- J0UMO-01- Ø Z E7UM-01- E7UM-01- W E7UM ) E7UM ) r 79) in two parts Can be combined with: Can be combined with: Imperial dimensions Page 1456 OJUM-01/-03 OJUM-06/-06-LL RJUM-01/-03 TJUM-01/-03 RJUM-01-ES RJUM-06/-06-LL FJUM-01/ Online tools and more information 3D-CAD files, prices and delivery time online 989

72 b1 r t drylin R round shaft guide drylin R liners Product range Short, closed design for round shafts made from iglidur E7 (the marathon runner) drylin R round shaft guide E7 U M O E7 U M iglidur E7 Liner Metric Compact t f drylin R liners Product range Long, open design for supported shafts made from iglidur E7 (the marathon runner) iglidur E7 Liner Metric Open Standard f t b1 r t d2 Y Y 2:1 Z d2 Y Y 2:1 Z The "marathon runner" with an 8-times longer life- 78) According to igus testing method Page 1038 The "marathon runner" with an 8-times longer life- 78) According to igus testing method Page 1038 time on steel shafts Please note: installation instructions Page 981 time on steel shafts Please note: installation instructions Page 981 min. -50 C min. -50 C max. +70 C max. +70 C -Tolerance 78) d2 b1 r t Z Weight Part No. [g] E7UMO E7UMO E7UMO E7UMO-01- E7UMO-01- E7UMO-01- E7UMO-01- E7UMO ) E7UMO ) -Tolerance 78) d2 b1 r t Z Weight Part No. [g] E7UM E7UM E7UM E7UM-02- E7UM-02- E7UM-02- E7UM-02- ousing bore for liner E7UMO-01 dimensions [mm] Shaft di W r t f Z Part No. / 2 ousing bore for liner E7UM-02 dimensions [mm] Shaft di r t f Z Part No. / 2 Ø 7 h r Ø 7 h Ø Z E7UMO E7UM E7UMO E7UM E7UMO E7UMO-01- Ø di E7UM E7UM-02- Ø di E7UMO E7UM E7UMO-01- E7UMO-01- Ø Z E7UM-02- E7UM E7UMO ) E7UMO ) W r 79) in two parts Can be combined with: Can be combined with: OJUM-01/-03 OJUM-06/-06-LL RJUM-02 RJUM-05/RJUME-05 TJUM-05/RJUMT-05 FJUMT-01/ Online tools and more information 3D-CAD files, prices and delivery time online 991

73 r b1 drylin R round shaft guide drylin R liners Product range Long, open design for supported shafts, two-piece made from iglidur X (the extreme) drylin R round shaft guide X U M X U M O iglidur X Liner Metric Open Standard f t drylin R liners Product range Long, closed design for round shafts, two-piece made from iglidur X (the extreme) iglidur X Liner Metric Standard t f b1 r t t d2 d2 Y Y 2:1 Z Y Y 2:1 Z The "extreme", resistant to temperature and chemicals on stainless steel and chromed shafts 78) According to igus testing method Page 1038 Please note: installation instructions Page 981 min C max. +0 C The "extreme", resistant to temperature and chemicals on stainless steel and chromed shafts 78) According to igus testing method Page 1038 Please note: installation instructions Page 981 min C max. +0 C -Tolerance 78) d2 b1 r t Z Weight Part No. [g] XUM XUM XUM XUM-01- XUM-01- XUM-01- XUM-01- -Tolerance 78) d2 b1 r t Z Weight Part No. [g] XUMO ) XUMO XUMO XUMO-01- XUMO-01- XUMO-01- XUMO-01- ousing bore for liner XUM-01 dimensions [mm] Shaft di r t f Z Part No. Ø 7 h XUM XUM XUM XUM-01- XUM-01- XUM-01- XUM-01- Ø Z / 2 Ø di ousing bore for liner XUMO-01 dimensions [mm] Shaft di W r t f Z Part No. Ø 7 h XUMO ) XUMO XUMO XUMO-01- XUMO-01- XUMO-01- XUMO-01- r Ø Z / 2 Ø di r 110) One-piece W Can be combined with: Can be combined with: RJUM-01/-03 TJUM-01/-03 RJUM-06/-06-LL FJUM-01/-02 OJUM-01/-03 TJUM-01/-03 OJUM-06/-06-LL 992 Online tools and more information 3D-CAD files, prices and delivery time online 993

74 b1 r t drylin R- round shaft guide drylin R liners Product range Short, closed design for round shafts, two-pieces made from iglidur X (the extreme) drylin R- round shaft guide X U M iglidur X Liner Metric Compact t f My sketches d2 Y Y 2:1 Z The "extreme", resistant to temperature and chemicals on stainless steel and chromed shafts 78) According to igus testing method Page 1038 Please note: installation instructions Page 981 min C max. +0 C -Tolerance 78) d2 b1 r t Z Weight Part No. [g] XUM XUM XUM-02- XUM-02- XUM-02- XUM-02- ousing bore for liner XUM-02 dimensions [mm] Shaft di r t f Z Part No. Ø 7 h XUM XUM XUM-02- XUM-02- XUM-02- XUM-02- Ø Z / 2 Ø di r Can be combined with: RJUM-02 RJUM-01-ES RJUM-05/RJUME-05 TJUM-05/RJUMT-05 FJUMT-01/ Online tools and more information 3D-CAD files, prices and delivery time online 995

75 drylin R- round shaft guide drylin R sliding discs Product range Large force displacement on different surfaces drylin R lin clip Product range Clip-in liners drylin R- round shaft guide s RSD J--06 J U C M Da K Slide disc iglidur J Outer Ø Width iglidur J Liner Clip-on Metric Standard t b1 b d3 d2 Made from the high-performance plastic iglidur J min. -50 C Quick installation by hand for sheet thicknesses of 78) According to igus testing method Page 1038 Low coefficient of friction max. +90 C 12 to mm 82) Design standards Page 980 Screw through the reinforced hole in the middle for a No axial securing required Please note: installation instructions Page 981 firm hold min. -50 C max. +90 C Outer Ø Wear limit Width For countersunk Max. static load Part No. d2 d3 1 t Part No. screw capacity Da s K [N] JUCM ± ,500 RSDJ JUCM ± ,000 RSDJ JUCM ± ,000 RSDJ JUCM JUCM JUCM JUCM JUCM JUCM-34- Technical data Part No. -Tolerance 78) F max. dynamic 82) F max. static 82) Weight JUCM JUCM JUCM-16- JUCM JUCM-24- JUCM JUCM JUCM-29- JUCM-34- p = 5 MPa p = 35 MPa [mm] [N] [N] [g] , , , , , ,000 5, ,0 6, ,0 6, ,500 7, Online tools and more information 3D-CAD files, prices and delivery time online 997

76 drylin R- round shaft guide drylin R press-fit bearings Product range Made from iglidur L100 drylin R press-fit bearings Product range Made from iglidur L100 drylin R- round shaft guide W L M b2 W L F M iglidur L100 Series L1 Metric Inner Ø Outer Ø Length iglidur L100 Series L1 With flange Metric Inner Ø Outer Ø Length d2 d2 d3 bs b1 bs b1 Extreme wear resistance Low coefficients of friction 80) Measured with gage -Tolerance 80) d2 b1 bs Please note: installation instructions Page 981 Material table Page 1495 min. - C max C Part No. Extreme wear resistance Low coefficients of friction 80) Measured with gage -Tolerance 80) d2 d3 b1 b2 bs Please note: installation instructions Page 981 Material table Page 1495 min. - C max C Part No WLM WLFM WLM WLFM WLM WLFM WLM WLFM WLM WLFM WLM WLFM WLM WLFM WLM WLM WLM WLM WLM WLM WLM WLM WLM WLM WLM WLM Online tools and more information 3D-CAD files, prices and delivery time online 999

77 drylin R round shaft guide drylin R solid polymer bearings Product range Standard type made from iglidur J (all-rounder) drylin R solid polymer bearings Product range Standard type, precise, made from iglidur J (all-rounder) drylin R round shaft guide s 1,5 x dn 1 d2 R J M s 1,5 x dn 1 d2 R J M P Closed iglidur J Metric Standard Closed iglidur J Metric Precise Standard Assembly by pressiftting 78) According to igus testing method Page 1038 Secured by circlips 82) Design standards Page ) Applies by room temperature: pressfit decrease min. - C with time depending on the temperature max. +60 C Please note: installation instructions Page 981 Imperial dimensions Page 1457 d2 1 s dn Part No. Easy assembly by soft pressfit 78) According to igus testing method Page 1038 Reduced bearing clearance 82) Design standards Page 980 Secured by circlips Please note: installation instructions Page 981 min. - C max. +60 C Imperial dimensions Page 1457 d2 1 s dn Part No RJM RJMP RJM RJMP RJM RJMP RJM RJMP RJM RJMP RJM RJMP RJM RJMP RJM RJMP-01- Technical data Part No. -Tolerance 78) F max. dynamic 82) F max. static 82) Weight Pressingp = 2.5 MPa p = 17.5 MPa force 83) [mm] [N] [N] [g] [N] RJM RJM RJM RJM RJM-01- RJM-01- RJM-01- RJM ,1 1,813 2,550 4,000 1,750 2,538 3,360 5,0 7,875 12,688 17,850 28, ,0 1,100 1,500 3,500 4,500 4,0 Technical data Part No. -Tolerance 78) F max. dynamic 82) F max. static 82) Weight p = 2.5 MPa p = 17.5 MPa [mm] [N] [N] [g] RJMP RJMP RJMP RJMP RJMP RJMP-01- RJMP-01- RJMP ,1 1,813 2,550 1,0 1,750 2,538 3,360 5,0 7,875 12,688 17, Can be combined with: Can be combined with: RQA-04 RTA-04 RGA-04 RGAS-04 RQA-04 RTA-04 RGA-04 RGAS Online tools and more information 3D-CAD files, prices and delivery time online

78 drylin R round shaft guide drylin R solid polymer bearings Product range Linear plain bearings with Japanese dimensions made from iglidur J4 drylin R solid polymer bearings Product range Low-cost linear plain bearings made from iglidur J260 drylin R round shaft guide c s 1,5 x dn 1 d2 R J 4 J P Closed iglidur J4 Japan standard Precise Standard c d2 d2 R J260 U M Closed iglidur J260 Grooved Metric Compact Alternative to ball bearings with Japanese dimension Quickly assembled Secured by circlips d2 1 s dn 78) According to igus testing method Page ) Design standards Page 980 Please note: installation instructions Page 981 Material table Page 1494 min. - C max. +60 C Part No. 2 variations: RJ260M (with plain design) and RJ260UM (grooved structure) d2 C 78) According to igus testing method Page ) Design standards Page 980 Please note: installation instructions Page 981 min. - C max. +60 C Part No RJ4JP RJ4JP RJ4JP RJ4JP RJ4JP-01- RJ4JP-01- RJ4JP x x x x 15 RJ260UM RJ260UM RJ260UM-02- RJ260UM-02- Technical data Part No. -Tolerance 78) F max. dynamic 82) F max. static 82) Weight p = 5 MPa p = 35 MPa [mm] [N] [N] [g] RJ4JP RJ4JP RJ4JP RJ4JP RJ4JP-01- RJ4JP-01- RJ4JP ,000 1,550 2, ,0 1,600 2,800 4,000 6,500 8, Technical data Part No. -Tolerance 78) F max. dynamic 82) F max. static 82) Weight p = 2.5 MPa p = 17.5 MPa [mm] [N] [N] [g] RJ260UM RJ260UM RJ260UM-02- RJ260UM ,0 2,9 4,0 5,0 8, Online tools and more information 3D-CAD files, prices and delivery time online

79 drylin R round shaft guide drylin R linear bearings Product range Closed, anodised aluminium adapter drylin R linear bearings Product range Closed, anodised aluminium adapter, precise drylin R round shaft guide 1 d2 R J U M d2 R J U M dn dn s Closed iglidur J Liner Metric Standard s Closed iglidur J Liner Metric Precise Secured by circlips 78) According to igus testing method Page 1038 Max. bearing clearance reduced by 50% 78) According to igus testing method Page ) Ø < 10 mm use iglidur JSM sleeve bearings Secured by circlips 82) Design standards Page ) Design standards Page 980 Please note: installation instructions Page 981 Please note: installation instructions Page 981 d2 1 s dn Part No. h7 h h RJZM ) RJZM ) RJZM ) RJUM RJUM RJUM RJUM-01- RJUM-01- RJUM-01- RJUM-01- RJUM RJUM Technical data Part No. -Tolerance 78) F max. dynamic 82) F max. static 82) Weight p = 5 MPa p = 35 MPa [mm] [N] [N] [g] RJZM ) RJZM ) RJZM ) RJUM RJUM RJUM RJUM-01- RJUM-01- RJUM-01- RJUM-01- RJUM RJUM ,4 2,0 3,6 5,100 8,000 9,000 12,000 3,675 3,675 6,7 5,075 6,7 10,080 15,750,375 35,700 56,000 87,500 1, ,070 d2 1 s dn Part No. h7 h h RJUM RJUM RJUM RJUM-11- RJUM-11- RJUM-11- RJUM-11- RJUM Technical data Part No. -Tolerance 78) F max. dynamic 82) F max. static 82) Weight p = 5 MPa p = 35 MPa [mm] [N] [N] [g] RJUM RJUM RJUM RJUM-11- RJUM-11- RJUM-11- RJUM-11- RJUM ,4 2,0 3,6 5,100 8,000 12,500 5,075 6,7 10,080 15,750,375 35,700 56,000 87, Can be combined with: Available with drylin liners (optional: J0/A180): RQA-01 RTA-01 RGA-01 RGAS-01 J E7 X 1004 Online tools and more information 3D-CAD files, prices and delivery time online

80 drylin R round shaft guide drylin R linear bearings Product range Closed stainless steel adapter made of 1.45 drylin R plain bearings Product range Closed, anodised aluminium adapter, short design drylin R round shaft guide 1 d2 R J U M ES R J U M Closed iglidur J dn s Liner Metric Standard Stainless steel d2 Closed iglidur J Liner Metric Compact Secured by circlips 78) According to igus testing method Page 1038 Also available as a reduced clearance version 78) According to igus testing method Page ) Design standards Page 980 RJUM-12 (Ø mm) 81) Ø < 10 mm with press fitted cylindrical Please note: installation instructions Page 981 bearings 82) Design standards Page 980 Please note: installation instructions Page 981 d2 1 s dn Part No. d2 Part No. h7 h h10 k7 h RJUM ES RJUM ES RJUM-01--ES RJUM-01--ES RJUM-01--ES RJZM ) RJZM ) RJUM RJUM RJUM RJUM RJUM RJUM RJUM RJUM Technical data Part No. -Tolerance 78) F max. dynamic 82) F max. static 82) Weight p = 5 MPa p = 35 MPa [mm] [N] [N] [g] RJUM ES RJUM ES RJUM-01--ES RJUM-01--ES RJUM-01--ES ,4 2,0 3,6 5,100 6,7 10,080 15,750,375 35, Available with drylin liners (optional: J0/A180): Technical data Part No. ousing bore -Tolerance 78) F max. dynamic 82) F max. static 82) Weight p = 5 MPa p = 35 MPa Ø 7 [mm] [mm] [N] [N] [g] RJZM ) RJZM ) RJUM RJUM RJUM RJUM-02- RJUM-02- RJUM-02- RJUM-02- RJUM ,0 1,500 2,500 3,750 6,000 8,750 4,0 4,550 4,550 5,880 8,0 10,500 17,500 26,0 42,000 61, J E7 X 1006 Online tools and more information 3D-CAD files, prices and delivery time online

81 drylin R round shaft guide drylin R linear bearings Product range Closed aluminium adapter (floating bearing) drylin R linear bearings Product range Split anodised aluminium adapter drylin R round shaft guide o R s s R J U M T J U M Split iglidur J Liner Metric Standard dn Closed iglidur J Liner Metric ds do dn e 1 d2 Self-aligning 1 d2 With reduced outer diameter, spherical area on 78) According to igus testing method Page 1038 Quick replacement of bearing lining without 78) According to igus testing method Page 1038 the outer diameter, O-rings for elastic seating 81) Ø < 10 mm with press fitted cylindrical bearings dismantling the shaft 82) Design standards Page 980 and hard anodised surface 82) Design standards Page 980 Please note: installation instructions Page 981 Please note: installation instructions Page 981 Imperial dimensions Page 1460 Floating bearing Page 980 Imperial dimensions Page 1460 d2 1 s dn ds do o e R Part No. d2 1 s dn Part No. h8 h h10 h h h RJZM ) TJUM RJUM TJUM RJUM TJUM RJUM TJUM RJUM TJUM RJUM TJUM RJUM TJUM RJUM TJUM RJUM Technical data Technical data Part No. ousing -Tolerance 78) F max. dynamic 82) F max. static 82) Weight Part No. -Tolerance 78) F max. dynamic 82) F max. static 82) Weight bore p = 5 MPa p = 35 MPa p = 5 MPa p = 35 MPa Ø 7 [mm] [mm] [N] [N] [g] [mm] [N] [N] [g] RJZM ) ,7 8 TJUM , RJUM , TJUM ,7 19 RJUM ,7 17 TJUM ,4 10, RJUM ,4 10, TJUM ,0 15, RJUM ,0 15, TJUM ,6, RJUM ,6, TJUM ,100 35, RJUM ,100 35, TJUM ,000 56, RJUM ,000 56, TJUM ,500 87, RJUM ,500 87, Can be combined with: Available with drylin liners (optional: J0/A180): Can be combined with: Available with drylin liners (optional: J0/A180): RQA-03 RTA-03 RGA-03 RGAS-03 J E7 X RQA-01 RTA-01 RGA-01 RGAS-01 J E7 X 1008 Online tools and more information 3D-CAD files, prices and delivery time online

82 drylin R round shaft guide drylin R linear bearings Product range Split aluminium adapter (floating bearing) drylin R plain bearings Product range Open, anodised aluminium adapter - for supported shafts drylin R round shaft guide o R s T J U M s f a O J U M Open iglidur J Liner Metric Standard 90 W 1 d2 dn Split iglidur J Liner Metric Self-aligning ds do dn e 1 d2 h Split aluminium adapter with spherical middle 78) According to igus testing method Page ) According to igus testing method Page 1038 area for automatic compensation of misalign- 82) Design standards Page ) Design standards Page 980 ments and O-rings for elastic seating Please note: installation instructions Page 981 Please note: installation instructions Page 981 Floating bearing Page 980 Imperial dimensions Page 1458 Imperial dimensions Page 1460 d2 1 s dn ds do o e R Part No. d2 W a dn 1 s f h Part No. h h10 h h7 h h ± TJUM OJUM TJUM (7 ) 1.2 OJUM TJUM OJUM TJUM OJUM TJUM (4.3 ) 1.5 OJUM TJUM (4.9 ) 2.0 OJUM TJUM (2.8 ) 2.0 OJUM TJUM (3.8 ) 2.0 OJUM Technical data Technical data Part No. -Tolerance 78) F max. dynamic 82) F max. static 82) Weight p = 5 MPa p = 35 MPa Part No. -Tolerance 78) F max. dynamic 82) F max. static 82) Weight p = 5 MPa p = 35 MPa [mm] [N] [N] [g] 0º 90º 180º 0º 90º 180º [g] TJUM , OJUM ,075 3,500 1, TJUM ,7 17 OJUM ,7 4,445 1, TJUM ,4 10, OJUM , ,080 6,943 2, TJUM ,0 15, OJUM ,0 1, ,750 12,600 6,0 42 TJUM ,6, OJUM ,6 2,953 1,523,375,670 10, TJUM ,100 35, OJUM ,100 4,0 2,278 35,700 29,735 15, TJUM ,000 56, OJUM ,000 6,810 3,800 56,000 47,660 26, TJUM ,500 87, OJUM ,500 10,750 6,1 87,500 75,265 42, Can be combined with: Available with drylin liners (optional: J0/A180): Can be combined with: Available with drylin liners (optional: J0/A180): RQA-03 RTA-03 RGA-03 RGAS-03 J E7 X RQA-01 RTA-01 RGA-01 RGAS-01 J E7 X 1010 Online tools and more information 3D-CAD files, prices and delivery time online

83 drylin R round shaft guide drylin R linear bearings Product range Open, anodised aluminium adapter, floating bearing My sketches drylin R round shaft guide R O s f a ds do d2 90 W O J U M e 1 h Open iglidur J Liner Metric Self-aligning 78) According to igus testing method Page 1038 With reduced outer diameter, spherical area on the outer diameter, O-rings for elastic seating and hard anodised surface 82) Design standards Page 980 Please note: installation instructions Page 981 Imperial dimensions Page 1458 d2 ds e o do 1 s R W a f h h7 h h ± (7 ) (4.3 ) (4.9 ) (2.8 ) (3.8 ) 2 Part No. OJUM OJUM OJUM OJUM-03- OJUM-03- OJUM-03- OJUM-03- OJUM Technical data Part No. ousing bore -Tolerance 78) F max. dynamic 82) F max. static 82) Weight p = 5 MPa p = 35 MPa OJUM OJUM OJUM OJUM-03- OJUM-03- OJUM-03- OJUM-03- OJUM Ø 7 [mm] 0º 90º 180º 0º 90º 180º [g] ,075 3,500 1, ,7 4,445 1, , ,080 6,943 2, ,0 1, ,750 12,600 6, ,6 2,953 1,523,375,670 10, ,100 4,0 2,278 35,700 29,735 15, ,000 6,810 3,800 56,000 47,660 26, ,500 10,750 6,1 87,500 75,265 42, Can be combined with: Available with drylin liners (optional: J0/A180): RQA-03 RTA-03 RGA-03 RGAS-03 J E7 X 1012 Online tools and more information 3D-CAD files, prices and delivery time online

84 drylin R round shaft guide drylin R pillow block Product range Closed, anodised aluminium housing, short design drylin R pillow block Product range Adjustable anodised aluminium housing, short design drylin R round shaft guide S S Sb 1 1 M S2 S1 N1 N2 L R J U M M N2 N1 S2 S1 R J U M E E A Closed iglidur J Liner Metric Compact 78) According to igus testing method Page 1038 With adjustable clearance L E A E1 Closed iglidur J Liner Metric Adjustable Compact 78) According to igus testing method Page ) Ø < 10 mm with press fitted cylindrical 82) Design standards Page 980 bearings Please note: installation instructions Page ) Design standards Page 980 Please note: installation instructions Page A M E S S1 S2 N1 N2 L Part No. 1 A M E E1 S S1 S2 Sb N1 N2 L Part No ± ±0.15 ± M RJZM ) M RJUM M RJUME M RJUM M RJUME M RJUM RJUME RJUM RJUME RJUM RJUME RJUM M RJUME M RJUM M RJUME M RJUM Technical data Part No. -Tolerance 78) F max. dynamic 82) F max. static 82) Weight p = 5 MPa p = 35 MPa [mm] [N] [N] [g] RJZM ) RJUM RJUM RJUM RJUM-05- RJUM-05- RJUM-05- RJUM-05- RJUM ,0 1,500 2,500 3,750 6,000 8,750 6,7 4,550 5,880 8,0 10,500 17,500 26,0 42,000 61, ,168 Technical data Part No. -Tolerance 78) F max. dynamic 82) F max. static 82) Weight p = 5 MPa p = 35 MPa [mm] [N] [N] [g] RJUME RJUME RJUME-05- RJUME-05- RJUME-05- RJUME-05- RJUME adjustable adjustable adjustable adjustable adjustable adjustable adjustable 8 1,0 1,500 2,500 3,750 6,000 8,750 5,880 8,0 10,500 17,500 26,0 42,000 61, ,168 Available with drylin liners (optional: J0/A180): Available with drylin liners (optional: J0/A180): J E7 X J E7 X 1014 Online tools and more information 3D-CAD files, prices and delivery time online

85 drylin R round shaft guide drylin R pillow block Product range Split anodised aluminium housing, screwed, short design drylin R pillow block Product range Closed, anodised aluminium housing, tandem design drylin R round shaft guide A A E L 1 Sectional view A Sectional view T J U M M S R J U M T S N1 N2 S1 S2 M A 1 Split iglidur J Liner Metric Compact E1 A E2 L N1 N2 S2 S1 Closed iglidur J Liner Metric Tandem Compact Replacement of the liner without dismantling the shaft 78) According to igus testing method Page ) Design standards Page 980 Please note: installation instructions Page 981 Tandem design Equipped with 2 liners to increase the guide length 78) According to igus testing method Page ) Design standards Page 980 Please note: installation instructions Page A M E S S1 S2 N1 N2 L Part No. 1 A M E1 E2 S S1 S2 N1 N2 L Part No. ±0.02 ± M M TJUM TJUM-05- TJUM-05- TJUM-05- TJUM ±0.15 ± M M M M RJUMT RJUMT RJUMT-05- RJUMT-05- RJUMT-05- RJUMT-05- RJUMT Technical data Part No. -Tolerance 78) F max. dynamic 82) F max. static 82) Weight p = 5 MPa p = 35 MPa [mm] [N] [N] [g] TJUM TJUM-05- TJUM-05- TJUM-05- TJUM ,0 1,500 2,500 3,750 6,000 8,0 10,500 17,500 26,0 42, Technical data Part No. -Tolerance 78) F max. dynamic 82) F max. static 82) Weight p = 5 MPa p = 35 MPa [mm] [N] [N] [g] RJUMT RJUMT RJUMT-05- RJUMT-05- RJUMT-05- RJUMT-05- RJUMT ,0 1,500 2,500 3,750 6,000 8,750 5,880 8,0 10,500 17,500 26,0 42,000 61, ,500 2,0 Available with drylin liners (optional: J0/A180): Available with drylin liners (optional: J0/A180): J E7 X J E7 X 1016 Online tools and more information 3D-CAD files, prices and delivery time online

86 E1 A 1 N2 N1 drylin R round shaft guide drylin R pillow block Product range Closed, anodised aluminium housing, long design drylin R pillow block Product range Closed, anodised aluminium housing, long design with manual clamp S1 M K drylin R round shaft guide 1 ØS2 Options M S R J U M ØS Ø R J U M K L KL E2 E1 A E2 L N2 N1 S2 S1 Closed iglidur J Liner Metric Long design Closed iglidur J Liner Metric Long design Manual clamp 78) According to igus testing method Page ) Design standards Page 980 Please note: installation instructions Page ) According to igus testing method Page ) Design standards Page 980 Please note: installation instructions Page A M E1 E2 S S1 S2 N1 N2 L Part No. 1 A M E1 E2 S S1 S2 N1 N2 W L KL K Part No ±0.15 ± M M M M M RJUM RJUM RJUM-06- RJUM-06- RJUM-06- RJUM-06- RJUM ; ±0.15 ± M M M M M RJUM K RJUM K RJUM-06--K RJUM-06--K RJUM-06--K RJUM-06--K RJUM K Technical data Part No. -Tolerance 78) F max. dynamic 82) F max. static 82) Weight p = 5 MPa p = 35 MPa [mm] [N] [N] [g] RJUM RJUM RJUM-06- RJUM-06- RJUM-06- RJUM-06- RJUM ,4 2,0 3,6 5,100 8,000 12,500 6,7 10,080 15,750,375 35,700 56,000 87, ,050 1,8 3,0 Technical data Part No. -Tolerance 78) F max. dynamic 82) F max. static 82) Clamp force Weight p = 5 MPa p = 35 MPa Axial 0º 0º [N] [g] RJUM K RJUM K RJUM-06--K RJUM-06--K RJUM-06--K RJUM-06--K RJUM K ,000 1,000 1,000 1, Available with drylin liners (optional: J0/A180): Available with drylin liners (optional: J0/A180): J E7 X J E7 X 1018 Online tools and more information 3D-CAD files, prices and delivery time online

87 drylin R round shaft guide drylin R pillow block Product range Closed, anodised aluminium floating pillow block drylin R pillow block Product range Open, anodised aluminium pillow block drylin R round shaft guide A1 A1 W S A2 2 Options R J U M LL S A2 2 Options O J U M LL E1 A E2 L ±3.0 mm Closed iglidur J Liner Metric Long design Floating bearing E1 A E2 L ±3.0 mm Open iglidur J Liner Metric Long design Floating bearing Compensation of parallelism errors up to 6 mm Quick assembly even on raw profiles 78) According to igus testing method Page ) Design standards Page 980 Please note: installation instructions Page 981 Floating bearing Page 980 Compensation of parallelism errors up to 6 mm 78) According to igus testing method Page ) Design standards Page 980 Please note: installation instructions Page 981 Floating bearing Page A E1 E2 S1 L A1 A2 2 3 Part No. 1 A E1 E2 S1 L A1 A2 2 3 W Part No. ±0.01 ±0.15 ± M M M M M RJUM LL RJUM LL RJUM-06- LL RJUM-06- LL RJUM-06- LL RJUM-06- LL RJUM LL ±0.01 ±0.15 ± [ ] M M M M M OJUM LL OJUM LL OJUM-06- LL OJUM-06- LL OJUM-06- LL OJUM-06- LL OJUM LL Technical data Part No. -Tolerance 78) Fmax. static Weight or dynamic 82) [mm] [N] [g] RJUM LL RJUM LL RJUM-06- LL RJUM-06- LL RJUM-06- LL RJUM-06- LL RJUM LL ,100 3,550 5,0 8,000 12, ,550 Technical data 82) Fmax. static load Part No. -Tolerance 78) Fmax. static Weight or dynamic 82) at 180 [mm] [N] [N] [g] OJUM LL OJUM LL OJUM-06- LL OJUM-06- LL OJUM-06- LL OJUM-06- LL OJUM LL ,100 3,550 5,100 8,000 12, ,5 2,280 3,800 6, ,0 Available with drylin liners (optional: J0/A180): Available with drylin liners (optional: J0/A180): J E7 X J E7 X 10 Online tools and more information 3D-CAD files, prices and delivery time online

88 E1 A 1 N2 N1 drylin R round shaft guide drylin R pillow block Product range drylin R pillow block Product range Open, anodised aluminium housing, long design Open, anodised aluminium housing, long design with manual clamp K M S S1 W drylin R round shaft guide M N1 N2 S2 S1 1 O J U M Options ØS2 ØS W L Ø KL O J U M K E E1 A E2 L Open iglidur J Liner Metric Long design 78) According to igus testing method Page 1038 Open iglidur J Liner Metric Long design Manual clamp 78) According to igus testing method Page ) Design standards Page ) Design standards Page 980 Please note: installation instructions Page 981 Please note: installation instructions Page A M E1 E2 S S1 S2 N1 N2 W L Part No. 1 A M E1 E2 S S1 S2 N1 N2 W L KL K Part No ; ±0.15 ± [ ] M M M M M OJUM OJUM OJUM-06- OJUM-06- OJUM-06- OJUM-06- OJUM ; ±0.15 ± M M M M M OJUM K OJUM K OJUM-06--K OJUM-06--K OJUM-06--K OJUM-06--K OJUM K Technical data Part No. -Tolerance 78) F max. dynamic 82) F max. static 82) Weight p = 5 MPa p = 35 MPa Technical data Part No. -Tolerance 78) F max. dynamic 82) F max. static 82) Clamp force Weight p = 5 MPa p = 35 MPa Axial OJUM OJUM OJUM-06- OJUM-06- OJUM-06- OJUM-06- OJUM º 90º 180º 0º 90º 180º [g] ,7 4,445 1, ,080 6,943 2, , ,750 12,600 6, ,953 1,523,375,670 10, ,0 2,278 35,700 29,735 15, ,810 3,800 56,000 47,660 26,600 1, ,500 10,750 6,1 87,500 75,265 42,875 2,750 OJUM K OJUM K OJUM-06--K OJUM-06--K OJUM-06--K OJUM-06--K OJUM K 0º 90º 180º 0º 90º 180º [N] [g] , , , , Available with drylin liners (optional: J0/A180): Available with drylin liners (optional: J0/A180): J E7 X J E7 X 1022 Online tools and more information 3D-CAD files, prices and delivery time online

89 drylin R round shaft guide drylin R pillow block Product range Open, anodised aluminium housing, long design, adjustable My sketches drylin R round shaft guide W S M N1 N2 S2 S1 1 O J U M E E1 S3 E2 L Open iglidur J Liner Metric Adjustable Long design A With two set screws (DIN 913), clearance adjustment possible 78) According to igus testing method Page ) Design standards Page 980 Please note: installation instructions Page A M E1 E2 S S1 S2 S3 N1 N2 W L +0.01; ±0.15 ± [ ] M5 4.3 M M M M M M M Part No. OJUME OJUME OJUME-06- OJUME-06- OJUME-06- OJUME-06- OJUME Technical data Part No. -Tolerance 78) F max. dynamic 82) F max. static 82) Weight p = 5 MPa p = 35 MPa OJUME OJUME OJUME-06- OJUME-06- OJUME-06- OJUME-06- OJUME º 90º 180º 0º 90º 180º [g] adjustable ,7 4,445 1, adjustable 1, ,080 6,943 2, adjustable 2,0 1, ,750 12,600 6,0 270 adjustable 3,6 2,953 1,523,375,670 10,658 5 adjustable 5,100 4,0 2,278 35,700 29,735 15,946 8 adjustable 8,000 6,810 3,800 56,000 47,660 26,600 1,490 adjustable 12,500 10,750 6,1 87,500 75,265 42,875 2,750 Available with drylin liners (optional: J0/A180): J E7 X 1024 Online tools and more information 3D-CAD files, prices and delivery time online 10

90 drylin R round shaft guide drylin R flange bearings Product range Closed, anodised aluminium adapter, round flange drylin R flange bearings Product range Closed, anodised aluminium adapter, square flange drylin R round shaft guide f ts f ts db ds F J U M db ds k F J U M With flange iglidur J Liner Metric d2 d3 With flange iglidur J Liner Metric Round design d2 d3 dt dt Square design 78) According to igus testing method Page ) Design standards Page 980 Please note: installation instructions Page ) According to igus testing method Page ) Design standards Page 980 Please note: installation instructions Page 981 d2 d3 dt f ts db ds Part No. d2 d3 dt k f ts db ds Part No. h7 ±0.01 h7 ±0.15 ± FJZM FJZM ) FJUM FJUM FJUM FJUM FJUM FJUM FJUM FJUM FJUM FJUM FJUM FJUM FJUM FJUM FJUM FJUM Technical data Technical data Part No. -Tolerance 78) F max. dynamic 82) F max. static 82) Weight p = 5 MPa p = 35 MPa Part No. -Tolerance 78) 82) Fmax. static Fmax. static load or dynamic 82) at 180 Weight [mm] [N] [N] [g] [mm] [N] [N] [g] FJZM ,7 FJZM ) ,7 17 FJUM , FJUM ,075 FJUM ,7 42 FJUM ,7 32 FJUM ,4 10, FJUM ,4 10, FJUM ,0 15, FJUM ,0 15, FJUM ,6, FJUM ,6, FJUM ,100 35, FJUM ,100 35, FJUM ,000 56, FJUM ,000 56, FJUM ,500 87, FJUM ,500 87, Available with drylin liners (optional: J0/A180): Available with drylin liners (optional: J0/A180): J E7 X J E7 X 1026 Online tools and more information 3D-CAD files, prices and delivery time online

91 drylin R round shaft guide drylin R flange bearings Product range Closed, anodised aluminium adapter, round flange, tandem design drylin R flange bearings Product range Closed, anodised aluminium adapter, square flange, tandem design drylin R round shaft guide d2 d2 F J U M T k F J U M T db db dt f ts ds d3 With flange iglidur J Liner Metric Tandem Round design dt f ts ds d3 With flange iglidur J Liner Metric Tandem Square design Equipped with 2 liners to increase the guide length 78) According to igus testing method Page ) Fitted with 2 pieces of JSM Please note: installation instructions Page 981 Equipped with 2 liners to increase the guide length 78) According to igus testing method Page ) Fitted with 2 pieces of JSM Please note: installation instructions Page 981 d2 d3 dt f ts db ds Part No. d2 d3 dt k f ts db ds Part No. h7 h FJZMT ) FJZMT ) FJUMT FJUMT FJUMT FJUMT FJUMT FJUMT FJUMT FJUMT FJUMT FJUMT FJUMT FJUMT FJUMT FJUMT FJUMT FJUMT Technical data Technical data Part No. Dimension -Tolerance 78) Guide Projected Weight Part No. Dimension -Tolerance 78) Guide Projected Weight nominal diameter length bearing surface nominal diameter length bearing surface [mm] [mm] [mm] [N] [g] [mm] [mm] [mm] [N] [g] FJZMT ) FJZMT ) FJUMT FJUMT FJUMT FJUMT FJUMT FJUMT FJUMT FJUMT FJUMT FJUMT FJUMT , FJUMT , FJUMT , FJUMT , FJUMT ,450 1,352. FJUMT ,450 1,249. Available with drylin liners (optional: J0/A180): Available with drylin liners (optional: J0/A180): J E7 X J E7 X 1028 Online tools and more information 3D-CAD files, prices and delivery time online

92 drylin R round shaft guide drylin R quad blocks Product range Closed design drylin R quad blocks Product range Open design drylin R round shaft guide Option Option R Q A O Q A W S 1 d D1 x1 E A Quad block with RJUM bearings Aluminium housing Standard with RJUM-01 Inner Ø Quad block with OJUM bearings Aluminium housing Standard with OJUM-01 Inner Ø ousing: Aluminium, equipped with four Options: ousing: Aluminium, equipped with four Options: drylin R linear plain bearings 01: Standard with RJUM-01 drylin R linear plain bearings 01: Standard with OJUM-01 S 03: With RJUM-03 04: With RJM-01 03: With OJUM-03 1 d A D1 x1 3 N S1 Please note: Installation instructions A N S1 Please note: Installation instructions Page 981 Page 981 E A R R d D1 A 1 3 R N E S S1 Part No. Self- Solid polymer d D1 A 1 W R N E S S1 Part No. Self- Standard aligning bearing Standard aligning with with with with with RJUM-01 RJUM-03 RJM-01 OJUM-01 OJUM M5 RQA RQA OQA OQA M5 RQA RQA RQA OQA OQA RQA RQA RQA OQA-01- OQA RQA RQA RQA M10 OQA-01- OQA RQA-01- RQA-03- RQA M12 OQA-01- OQA M10 RQA-01- RQA-03- RQA M16 OQA-01- OQA M12 RQA-01- RQA-03- RQA M16 RQA-01- RQA-03- RQA-04- Are equipped with: Available with drylin liners (optional: J0/A180): Are equipped with: Available with drylin liners (optional: J0/A180): RJUM-01 RJUM-03 RJM-01 J E7 X OJUM-01 OJUM-03 J E7 X 10 Online tools and more information 3D-CAD files, prices and delivery time online

93 drylin R round shaft guide drylin R pillow blocks Product range Closed, tandem design drylin R pillow blocks Product range Open, tandem design drylin R round shaft guide Option Option R T A O T A Tandem housing with RJUM bearing Aluminium housing Standard with RJUM-01 Inner Ø Tandem housing with OJUM bearing Aluminium housing Standard with OJUM-01 Inner Ø ousing: Aluminium, equipped with 2 drylin R Options: ousing: Aluminium, equipped with 2 drylin R Options: linear plain bearings to increase the guide length 01: Standard with RJUM-01 linear plain bearings to increase the guide length 01: Standard with OJUM-01 d2 03: With RJUM-03 04: With RJM W d2 03: With OJUM-03 M d D S1 4 Please note: Installation instructions Page 981 M d D S1 4 Please note: Installation instructions Page 981 E1 L L E1 E2 d D S1 L M E1 E2 d2 Part No. Self- Solid ±0.02 ±0.15 ±0.15 Standard aligning polymer bearing 0.02 with with with RJUM-01 RJUM-03 RJM M RTA RTA RTA RTA RTA RTA RTA RTA RTA-01- RTA-03- RTA M RTA-01- RTA-03- RTA M RTA-01- RTA-03- RTA M RTA-01- RTA-03- RTA-04- d D S1 L M E1 E2 d2 W Part No. Self ±0.02 ±0.15 ±0.15 Standard aligning 0.02 with with OJUM-01 OJUM OTA OTA OTA OTA OTA-01- OTA M OTA-01- OTA M OTA-01- OTA M OTA-01- OTA-03- Are equipped with: Available with drylin liners (optional: J0/A180): Are equipped with: Available with drylin liners (optional: J0/A180): RJUM-01 RJUM-03 RJM-01 J E7 X OJUM-01 OJUM-03 J E7 X 1032 Online tools and more information 3D-CAD files, prices and delivery time online

94 drylin R round shaft guide drylin R pillow blocks Product range Closed, long design drylin R pillow blocks Product range Open, long design drylin R round shaft guide Option Option R G A O G A ousing: Aluminium, equipped with drylin R linear plain bearings Options: 01: Standard with RJUM-01 03: With RJUM-03 04: With RJM W d2 Options: 01: Standard with OJUM-01 03: With OJUM-03 Please note: Installation instructions Page 981 M d D S1 Please note: Installation instructions Page 981 L E2 Linear housing with RJUM bearings Aluminium housing Standard with RJUM-01 Inner Ø Linear housing with OJUM bearings Aluminium housing Standard with OJUM-01 Inner Ø d2 ousing: Aluminium, equipped with drylin R linear plain bearings M d D L E S1 E1 E1 d D S1 L M E1 E2 d2 Part No. Self- Solid polymer ±0.3 ±0.02 ±0.15 ±0.15 Standard aligning bearing 0.02 with with with RJUM-01 RJUM-03 RJM M RGA RGA M RGA RGA RGA RGA RGA RGA RGA-01- RGA-03- RGA M RGA-01- RGA-03- RGA M RGA-01- RGA-03- RGA M RGA-01- RGA-03- RGA-04- d D S1 L M E1 E2 d2 W Part No. Self ±0.3 ±0.02 ±0.15 ± Standard aligning 0.02 with with OJUM-01 OJUM M OGA OGA OGA OGA OGA-01- OGA M OGA-01- OGA M OGA-01- OGA M OGA-01- OGA-03- Are equipped with: Available with drylin liners (optional: J0/A180): Are equipped with: Available with drylin liners (optional: J0/A180): RJUM-01 RJUM-03 RJM-01 J E7 X OJUM-01 OJUM-03 J E7 X 1034 Online tools and more information 3D-CAD files, prices and delivery time online

95 drylin R round shaft guide drylin R pillow block Product range Closed, short design drylin R pillow block Product range Open, short design drylin R round shaft guide Option Option R G A S O G A S ousing: Aluminium, equipped with drylin R linear plain bearings Variations: Standard: RGAS-01-Ø Self-aligning: RGAS-03-Ø Solid polymer bearing (cost-effective, light): RGAS-04-Ø Linear housing with RJUM bearings Aluminium housing Small Standard with RJUM-01 Inner Ø Options: 01: Standard with RJUM-01 03: With RJUM-03 04: With RJM-01 ousing: Aluminium, equipped with drylin R linear plain bearings Variations: Standard: OGAS-01-Ø Self-aligning: OGAS-03-Ø Linear housing with OJUM bearings Aluminium housing Small Standard with OJUM-01 Inner Ø Options: 01: Standard with OJUM-01 03: With OJUM-03 A2 ød Please note: Installation instructions Page 981 A2 ( ) E3 Please note: Installation instructions Page ød ød 2 1 øs E1 E øs ød E1 E A1 A A1 A d D 1 2 A A1 A2 E E1 S Part No. Self- Solid polymer Standard aligning bearing with with with RJUM-01 RJUM-03 RJM-01 RGAS RGAS RGAS RGAS RGAS RGAS RGAS-01- RGAS-03- RGAS-04- RGAS-01- RGAS-03- RGAS-04- RGAS-01- RGAS-03- RGAS-04- RGAS-01- RGAS-03- RGAS-04- d D 1 2 A A1 A2 E E1 E3 (º) S Part No. Standard with OJUM-01 OGAS OGAS OGAS-01- OGAS-01- OGAS-01- OGAS-01- Selfaligning with OJUM-03 OGAS OGAS OGAS-03- OGAS-03- OGAS-03- OGAS-03- Are equipped with: Available with drylin liners (optional: J0/A180): Are equipped with: Available with drylin liners (optional: J0/A180): RJUM-01 RJUM-03 RJM-01 J E7 X OJUM-01 OJUM-03 J E7 X 1036 Online tools and more information 3D-CAD files, prices and delivery time online

96 drylin R round shaft guide igus testing methods igus testing method for measuring the tolerance of drylin plain bearings drylin R round shaft guide igus testing method To ensure the correct function of a drylin bearing, it is is defined with which the plug gauge is loaded when the necessary to use the bearing with a defined minimum plain bearing is tested. clearance. The quality control of this dimension is carried out with a plug gauge test. For this purpose, specific force Part No. Test force Øi test housing Min. bearing Øi Max. bearing Øi [N] (c. gauge-free) (with c. gauge) J / J0 / E7UM-01/02-10 J / J0 / E7UM-01/02-12 J / J0 / E7UM-01/02-16 J / J0 / E7UM-01/02- J / J0 / E7UM-01/02- J / J0 / E7UM-01/02- J / J0 / E7UM-01/02- J / J0 / E7UM-01/02-50 J / J0 / E7UM-01/ mm mm mm mm mm mm mm 500 mm 600 mm 10.0 mm 12.0 mm 16.0 mm.0 mm.0 mm.0 mm.0 mm mm mm mm mm mm.070 mm.070 mm.090 mm.090 mm mm mm Part No. Test force Øi test housing Min. bearing Øi Max. bearing Øi [N] (c. gauge-free) (with c. gauge) XUMO XUM-01/02-12 XUM XUM-01/02-16 XUM-01/02- XUM-01/02- XUM-01/02- XUM-01/ mm mm mm mm mm mm mm mm 9.98 mm mm mm mm.03 mm mm mm.00 mm mm mm mm mm.07 mm.01 mm.01 mm.05 mm Explanation: The iglidur X material has a higher stiffness than iglidur J. This causes shifts depending on the diameter compared to the ratio of test force to LD diameter. The parts are designed in such a way that under load the clearance between the iglidur X and iglidur J bearings is as identical as possible. Thereby in the use of iglidur X liners, increased shifting forces can occur in the unloaded new condition on an h-toleranced shaft. JUI JUI JUI JUI JUI JUI-01- JUI JUI RJM RJM RJM RJM RJM-01- RJM-01- RJM-01- RJM inch inch inch inch inch inch inch inch inch inch inch inch inch inch inch inch 1. inch 1.31 inch inch 1.50 inch inch inch inch inch mm 8.0 mm mm mm 10.0 mm mm mm mm mm mm mm mm mm.0 mm.092 mm mm.0 mm.092 mm mm.0 mm.092 mm mm.050 mm.112 mm When using a plain bearing (z.. JUM/RJ) in connection with a housing (z.. RJUM, OJUM, RGA) the factory tolerance of the housing bore (standard case: 7) is also added to the minimum clearance stated above. The total from these two values then produces the maximum possible bearing tolerance. The effective clearance is also influenced by the shaft tolerance. The maximum shaft undersize value should be added to give the maximum possible clearance. F max dynamic: The maximum values are the result of the projected surface and 5 MPa surface pressure. F max static: The maximum values are the result of the projected surface and 35 MPa surface pressure. Installation instructions Page 981 RJI RJI RJI RJI RJI RJI-01- RJI RJI RJ260(U)M RJ260(U)M RJ260(U)M-02- RJ260(U)M inch inch inch inch inch 0.50 inch inch inch inch inch inch inch inch inch inch inch 1. inch 1.44 inch inch 1.50 inch inch inch inch inch mm mm mm mm mm mm mm.0 mm.100 mm mm.0 mm.100 mm Tightening torque for drylin connections between metal parts Metric thread (Da) Torque Recommended torque [Nm] [Nm] M3 M4 M5 M Please be aware of the minimal screw in depth for aluminium and zinc parts: 1.5 x Da 1038 Online tools and more information 3D-CAD files, prices and delivery time online

97 My sketches 10 Online tools and more information

98 drylin linear technology drylin shafts ard anodised aluminium shafts for optimum running performances Stainless steel for high corrosion resistance ardened steel and stainless steel shafts Carbon fibre shafts Round shafts with and without support

99 drylin shafts Advantages drylin shafts Product range Suitable liner materials: Aluminium Steel Stainless steel, hardened Soft Carbon fibre The all-rounder iglidur J The specialist iglidur J0 The extreme iglidur X The marathon runner iglidur E7 The FDA-compliant iglidur A180 Possible counter partner all shaft materials aluminium, hard anodised hardened stainless steel steel/stainless steel shaft all shaft materials Application temperature -50 to +90 C -50 to +90 C -100 to +0 C -50 to +70 C -50 to +90 C Marking SWUM SWUM EWUM EEWUM EWUMS CWM AWMP/ AWMU AWMR SWM SWUMN SWM SWUMN EWM EWUMN EEWM EEWUMN EWMR EWMS AWMPV est coefficient of friction with steel shaft aluminium, hard anodised steel hard chrome-plated steel/stainless steel shaft stainless steel shaft Maximum service life aluminium, hard anodised aluminium, hard anodised hardened stainless steel steel/stainless steel shaft stainless steel shaft Permissible stat. surface pressure 35 MPa 23 MPa 150 MPa 18 MPa 28 MPa Moisture absorption 1.3 % weight 0.7 % weight 0.5 % weight < 0.1 % weight 0.2 % weight Contact resistance > Ωcm > 10 8 Ωcm < 10 5 Ωcm > 10 9 Ωcm > Ωcm More information Page 141 Page 235 Page 245 Page 1494 Page 363 Available shaft materials: Aluminium Ideal in combination with liners made from iglidur J/J0 Lightweight Low wear Corrosion resistant Available from stock Steel E7 liners for up to 8 times longer service life Low-priced standard igh load capacity Dry area applications ard chrome-plated also available Lower coefficient of friction against plastic bearings Stainless steel A180 liners for food and pharmaceutical applications igh corrosion resistance igh chemical resistance Ideal solution for wet applications V4A for extremely chemical intensive applications Please remember that this is a technical surface. Small colour variations are possible due to variable coating depths. Material EN AW 6061/ V CFK Composite Ø 6 2 Ø 8 2 Ø 10 2 Ø 12 Ø 16 Ø Ø Ø 1 / Ø 1 / Ø 50 1 Ø 60 1 Ø Tolerance h8 0.1 h9 h6 h6 h7 h7 h6 h6 h6 h6 h9 h9-0.1 mm Max. supply length Ø 810 Max. supply length Ø10 Surface 3,000 3,000 3,000 3,000 2,000 3,000 4,000 3,000 6,000 6,000 6,000 6,000 6,000 6,000 6,000 6,000 3,000 3,000 2,000 hard anodised hardened/ ground hard chromed hardened/ ground hardened/ ground drawn, polished UCU unidirectional/ cross winding/ unidirectional Surface roughness Ra < < 0.6 µm Wear Coefficient of friction Corrosion ardness up to 550 V 60+4 RC 60+4 RC 52+8 RC 52+8 RC soft + - Aluminium, hard anodised Steel, hardened Steel, chromed Stainless steel, hardened Stainless steel, drawn + - Aluminium, hard anodised Steel, hardened Steel, chromed Stainless steel, hardened Stainless steel, drawn + - Aluminium, hard anodised Steel, hardened Steel, chromed Stainless steel, hardened Stainless steel, drawn Roundness 1/2 ø Tolerance 1/2 ø Tolerance 1/2 ø Tolerance 1/2 ø Tolerance 1/2 ø Tolerance 1/2 ø Tolerance ± 0.05 mm 1 2 Delivery time: from stock simply cut shafts 38 days; machined shafts 12 days ollow shaft 7,5; 10; Material Female thread, axial Male thread Keyway iglidur J against particular shaft materials iglidur J against particular shaft materials iglidur J against particular shaft materials Groove recess Weight Costs Chemical charge Flats + - Aluminium, hard anodised Steel, hardened Steel, chromed Stainless steel, hardened Stainless steel, drawn + - Aluminium, hard anodised Steel, hardened Steel, chromed Stainless steel, hardened Stainless steel, drawn + - Aluminium, hard anodised Steel, hardened Steel, chromed Stainless steel, hardened Stainless steel, drawn Female thread, radial Special machining All shafts can be individually machined. Please send us your drawing. We can then provide a quotation quickly. Inquiries can be put online as well: iglidur J against particular shaft materials iglidur J against particular shaft materials iglidur J against particular shaft materials Query form Page Online tools and more information 3D-CAD files, prices and delivery time online

100 drylin shafts drylin shafts Product range Precision aluminium shafts drylin shafts Product range Supported aluminium shafts drylin shafts Options Options A W M P A W M U Aluminium shaft Metric AWMR AWMP AWMU Precise Outer Ø Shaft length [mm] Aluminium shaft Metric Supported Outer Ø Shaft length [mm] igus recommendation: linear bearings equipped with iglidur E7 liners for AWMP: Solid shaft up to Ø mm hollow shaft from Ø mm Material: EN AW 6061/6060 D max times longer service life AWMR: Tube Straightness: DIN 1 ardness: 75 ø Material: EN AW 6061/6060 Straightness: EN ardness: 75 ard anodised surfaces Page 874 Surface: hard anodised ardness: up to 550 V ole pitches symmetrical C5 = C6 E max V C5 T1 C6 Surface: hard anodised ardness: up to 550 V Imperial dimensions upon request ard anodised surfaces Page 874 Part No. Design Outer- Tolerance Insulation Inner- Max. Weight Ø thickness Ø length [kg/m] AWMP-06 AWMP-08 AWMP-10 AWMP-12 AWMR-12 AWMP-16 AWMR-16 AWMP- AWMR- AWMP- AWMR- AWMP- AWMPV- AWMP- AWMPV- AWMP-50 AWMP-60 Solid shaft Solid shaft Solid shaft Solid shaft Tube Solid shaft Tube Solid shaft Tube Solid shaft Tube ollow shaft Solid shaft ollow shaft Solid shaft ollow shaft ollow shaft h8 h8 h8 h8 h8 h8 h8 h8 h9 h8 h9 h8 h8 h8 h8 h8 h ,000 3,000 3,000 3,000 3,000 3,000 3,000 3,000 3,000 3,000 3,000 3,000 3,000 3,000 3,000 3,000 3, Order example: AWMP : Precision aluminium shaft Ø 12 mm, 500 mm in length Part No. D V (º) E T1 C5/C6 Max. Weight ly lz Wby Wbz 0.1 ±0. ±0. Min. Max. length [kg/m] [mm 4 ] [mm 4 ] [mm 2 ] [mm 2 ] AWMU-12 AWMU-16 AWMU ,000 4,000 4, ,600,000 76,600 19,700 39,0 86,0 1,3 1,778 2,946 1,091 1,844 3,336 AWMU- AWMU ,000 4, , ,700 3,853 5, , ,700 6,577 10,049 AWMU- 86) , , ,800 10,468 19,160 86) The tolerance for the shaft diameter D amounts 0,15 Order example: AWMU : Supported aluminium shaft Ø 16 mm, 500 mm in length 1044 Online tools and more information 3D-CAD files, prices and delivery time online

101 drylin shafts drylin shafts Product range Standard steel shafts drylin shafts Product range Supported standard steel shaft drylin shafts Options S W M SWUM 145 D M SWUMN SWM SWM-06 SWM-08 SWM-10 SWM-12 SWM-16 SWM- SWM- SWM- SWM- SWM-50 SWUMN SWUM igus recommendation: linear bearings equipped with iglidur E7 liners for 8 times longer service life Completely supported and mounted with standard aluminium support Available shaft materials: Cf53 steel (1.1213), hardened/ground Cf53 steel ( V), hard-chromed steel shafts Part No. d Weight Max. Steel shaft Metric Effective hardness depth [kg/m] length (at ) , , , , , , , , , , Outer Ø For supported shafts: Shaft length [mm] Partial shaft support supplied in lengths of 600 mm max. Standard pitch T2, T1 also possible upon request ole pitches symmetrical C5 = C6 N2 ø N1 ( ) E C5 T1/T2 C6 SWUM-12 SWUM-16 SWUM- SWUM- SWUM- SWUM- SWUM-50 V supported steel shafts Part No. D V N1 N2 M (º) E T1 87) C5/C6 T2 C5/C6 Weight ±0.02 ±0.15 min. Max. Min. max. for T1 Standard for T2 Standard [kg/m] ) T1 pitch upon request; standard is T2 hard-chromed steel shafts Part No. d Weight Max. Effective hardness depth [kg/m] length (at ) SWM-06 SWM-08 SWM-10 SWM-12 SWM-16 SWM- SWM- SWM- SWM- SWM ,000 4,000 4,000 6,000 6,000 6,000 6,000 6,000 6,000 6, Order example: SWM : Steel shaft 16 mm Ø , 500 mm in length supported steel shafts Part No. d 1 A A1 A2 d2 T C5/C6 Weight ±0.02 ±0.02 Min. Max. [kg/m] SWUMN-12 SWUMN-16 SWUMN- SWUMN- SWUMN- SWUMN- SWUMN M4 M5 M10 M12 M Low level supported shafts are delivered unmounted. Order example: SWUM : Supported steel shaft 16 mm ø made from , 500 mm length 1046 Online tools and more information 3D-CAD files, prices and delivery time online

102 drylin shafts drylin shafts Product range Stainless steel shafts drylin shafts Product range Materials 1.41, 1.34, 1.41, drylin shafts Options E W M EWM EEWM EWMR Steel shaft Metric Outer Ø Shaft length [mm] igus recommendation: linear bearings equipped with iglidur E7 liners for 8 times longer service life Completely supported and mounted with standard aluminium support For supported shafts: Shaft support supplied in lengths of 600 mm max. Standard pitch T2, T1 also possible upon request ole pitches symmetrical C5 = C6 hardened stainless steel 1.41 Part No. d Weight Max. Effective hardness depth [kg/m] length (at 1.41) EWM-06 88) EWM-08 88) EWM-10 88) EWM-12 EWM-16 EWM- EWM- EWM- EWM- EWM ,000 4,000 4,000 6,000 6,000 6,000 6,000 6,000 6,000 6, ) Material X90 (1.4112) Available shaft materials 1.41 or ,hardened/ground EWM 1.34, hardened/ground EEWM 1.41, extracted EWMR , extracted EWMS hardened stainless steel 1.34 Part No. d Weight Max. Effective hardness depth [kg/m] length (at 1.34) EEWM-06 EEWM-08 EEWM-10 EEWM-12 EEWM-16 EEWM- EEWM- EEWM- EEWM- EEWM ,000 4,000 4,000 6,000 6,000 6,000 6,000 6,000 6,000 6, stainless steel 1.41 (EWMR) or soft stainless steel (EWMS) Part No. d Weight Max. [kg/m] length EWMR-10 EWMS-10 EWMR-12 EWMR-16 EWMR- EWMS- EWMR- EWMR ,000 3,000 3,000 3,000 3,000 3,000 3,000 3,000 Order example: EWM : Stainless steel shaft 16 mm Ø 1.41, 500 mm in length 1048 Online tools and more information 3D-CAD files, prices and delivery time online

103 drylin shafts drylin shafts Product range Supported stainless steel shafts drylin shafts Product range Low level supported stainless steel shafts drylin shafts 145 D M Options E W U M N T1 EWUM N2 ø N1 ( ) E V EWUMN Low level supported stainless steel shaft, metric Outer Ø Shaft length [mm] ole pattern igus recommendation: linear bearings equipped with iglidur E7 liners for 8 times longer service life Shaft support blocks for Ø mm made from stainless steel VA Connecting dimensions as standard supports made from aluminium C5 T1/T2 C6 EWUM: Supported stainless steel shaft EWUMN: Low level supported stainless steel shaft Available materials and shafts: 1.41 (AISI 4C), max mm ole pattern: T2: T2 pitch (standard) T1: T1 pitch (upon request) supported stainless steel shafts 1.41 Part No. D V N1 N2 M (º) E T1 87) C5/C6 T2 C5/C6 Weight Min. Max. Min. Max. ±0.02 ±0.15 for T1 Standard for T2 Standard [kg/m] EWUM-12 EWUM EWUM EWUM EWUM- EWUM- EWUM ) T1 pitch upon request; standard is T2 low level supported stainless steel shafts 1.41 Part No. d 1 A A1 A2 d2 T C5/C6 Weight ±0.02 ±0.02 Min. Max. [kg/m] EWUMN-12 EWUMN-16 EWUMN- EWUMN- EWUMN- EWUMN- EWUMN M4 M5 M10 M12 M Low level supported shafts are delivered unmounted. Order example: EWUM T1: Supported stainless steel shaft (1.41), outer-ø 16 mm, 500 mm length, T1 pitch Order example: EWUMN : Low level supported stainless steel shaft (1.41), outer-ø 16 mm, 500 mm length 1050 Online tools and more information 3D-CAD files, prices and delivery time online

104 drylin shafts drylin shafts Product range Partially supported stainless steel shafts drylin shafts Product range drylin shafts D F Options Ø V E W U M S - ES T1 EWUM-ES/ EWUMS-ES (ϒ) E Partially supported stainless steel shaft, metric Material Outer Ø Shaft length [mm] ole pattern igus recommendation: linear bearings equipped with iglidur E7 liners for 8 times longer service life Shaft support blocks for Ø mm made from stainless steel VA Connecting dimensions as standard supports made from aluminium C5 G T1/T2 C6 Available materials and lengths: 1.41 (AISI 4C), max mm EWUM (AISI 316T1), max mm EWUMS Options: blank: 1.41 material S: material ole pattern: T2: T2 pitch (standard) T1: T1 pitch partially supported stainless steel shafts 1.41 Part No. D V E ϒ F G T1 C5/C6 T2 C5/C6 h6 ±0.02 for T1 Standard for T2 Min. Max. Min. Max. EWUM-ES-12 EWUM-ES-16 EWUM-ES- EWUM-ES- EWUM-ES- EWUM-ES T2 pitch = standard, T1 upon request partially supported stainless steel shafts 1.41 Part No. D V E ϒ F G T1 C5/C6 T2 C5/C6 h6 ±0.02 for T1 Standard for T2 Min. Max. Min. Max. EWUMS-ES-12 EWUMS-ES-16 EWUMS-ES- EWUMS-ES- EWUMS-ES- EWUMS-ES T2 pitch = standard, T1 upon request Order example: EWUM-ES--500: Partially supported stainless steel shaft, 1.41 material, T2 pitch (standard), outer-ø mm, 500 mm length Order example: EWUMS-ES--500-T1: Partially supported stainless steel shaft, material, T1 pitch, outer-ø mm, 500 mm length 1052 Online tools and more information 3D-CAD files, prices and delivery time online

105 drylin shafts drylin shafts Product range Carbon fibre shaft drylin shafts Product range Shaft end supports, floating drylin shafts Options C W M T A - 08 CWM Carbon fibre shaft Metric Outer Ø d 2 Shaft length [mm] Shaft end support, floating Inner Ø Material: Roundness tolerance: Diameter tolerance: CFK Composite ± 0.05 mm -0.1 mm R E A øs Material: aluminium Threaded fixing hole Application temperature: Max. +80 C Colour: lack Part No. Design Diameter Max. Weight 0.1 length [g] CWM-12 CWM-16 CWM- CWM- ollow shaft ollow shaft ollow shaft ollow shaft 12/9 16/12.5 /16 /26 2,000 mm 2,000 mm 2,000 mm 2,000 mm Order example: CWM : Carbon fibre shaft, outer-ø 16 mm, 500 mm length Part No. d A 2 ø S E R Weight ±0.015 [g] TA-08 TA-10 TA-12 TA-16 TA- TA- TA- TA M5 M5 M10 M12 M12 M ,000 Order example: TA-10: Floating shaft end support with inner-ø 10 mm 1054 Online tools and more information 3D-CAD files, prices and delivery time online

106 drylin shafts drylin shafts Product range drylin shafts Product range drylin shafts Shaft end supports, fixed Shaft end blocks, standard version T A F - 08 W A - 08 d S3 S2 SW 2 Shaft end support Fixed Inner Ø Shaft end block Standard version Inner Ø Material: aluminium Plain fixing hole Material: aluminium R E A øs 1 S1 d E N1 N2 L Part No. d A 2 ø S E R Weight Part No. d 1 L S1 S2 S3 E N1 N2 SW Weight ±0.015 [g] ±0.02 ±0.1 [g] TAF WA M TAF WA TAF WA TAF WA M TAF WA M TAF WA M TAF WA M TAF ,150 WA M ,0 WA M ,950 Order example: TAF-12: Fixed shaft end support with inner Ø 12 mm Order example: WA-08: Shaft end block, standard design with inner Ø 8 mm 1056 Online tools and more information 3D-CAD files, prices and delivery time online

107 drylin shafts drylin shafts Product range drylin shafts Product range drylin shafts Shaft end blocks, compact design Shaft end blocks, narrow version W A C - 06 W A S - 08 Shaft end block Compact version Inner Ø Shaft end block Narrow version Inner Ø Material: aluminium Material: aluminium S3 S2 SW A1 d SW 1 S1 d N1 N2 L S V 1 E A E Part No. d 1 L S1 S2 S3 E N1 N2 SW Weight Part No. d 1 A A1 E S V SW Weight from ±0.1 [g] ±0.02 [g] to WAS WAC M WAS WAC M WAS WAC WAS WAC WAS WAC WAS WAC WAS WAC WAC M WAC M WAC M WAC M Order example: WAC-12: Shaft end block, compact design with inner Ø 12 mm Order example: WAS-12: Shaft end block, narrow design with inner Ø 12 mm 1058 Online tools and more information 3D-CAD files, prices and delivery time online

108 drylin shafts drylin shafts Product range Flanged shaft end block ød2 ød W A F - 12 Shaft end block With flange Inner Ø drylin Expert 2.0 Online tools Expert for linear guides: System selection & service life calculation with CAD Configure and calculate linear bearings constantly expanded by new sizes and products Easily calculate the service life of your required linear guide and configure with a few clicks. Select a drylin system and add the relevant environmental parameters. Select the bearing size, carriage, number and position. Then enter the distance between the rails and the mounting. Define more relevant parameter of the guidance and select a rail length. The results are displayed. V L Material: aluminium øs Download the online tools App SW E A Part No. Ø d A L Ø d2 E Ø s V SW Weight [g] WAF ± WAF-16 WAF- WAF- WAF ± ± ± ± Aluminium shafts in combination with iglidur J enable high speeds due to the lightweight. Stainless steel shafts combined with iglidur X, offer maximum resistance at +1 C. Cleaning in filling machine. WAF ± WAF ± ,0 Order example: WAF-16: Flanged shaft end block with inner Ø 16 mm Stainless steel combined with iglidur J in cut-off grinding machine. Grinding particles and coolants, extreme conditions. Cost-effective guide for work piece carriage in a machine tool through supported aluminium shaft Online tools and more information 3D-CAD files, prices and delivery time online

109 drylin Fax-Reply to shafts Send an to or online Date: Phone: Fax: From: Phone: Fax: To: igus Gmb Technical marketing drylin department P.O. ox Cologne, Germany Lower costs in 45 seconds? Simply fill in, send off, save! Step 1: Please choose the required shaft material AWMP SWM EEWM EWMR Aluminium, hard anodised Cf53 steel (1.1213), hardened Stainless steel (1.34), hardened Stainless steel (1.41), drawn SWM EWM EWMS Cf53 steel ( V), hard-chromed Step 2: Please choose the required version Stainless steel (1.41), hardened Stainless steel (1.4571), drawn Standard design Low level supported Standard supported Step 3: Please enter the required dimensions Outer-Ø [mm] Length (mm) Step 4: Please draw a sketch of the required machining Chamfer one side both sides 2 Key surface one side both sides 3 Trunion one side both sides Groove recesses axial Quantitiy 5 Male threads, axial one side both sides 6 Female threads, axial one side both sides Female thread, radial Quantity 7 Other surfacing one side both sides

110 drylin linear technology drylin Q square linear guides Torque-resistant linear guides Square section rail made from hard-anodised aluminium Apply moments up to 10 Nm Adjustable linear carriage with or without manual clamp Lubrication-free and lightweight

111 drylin Q square linear guides Advantages Torque resistant, space saving, light, unsupported installation Lubrication-free ollow rail for supply lines and magnetic tape square linear guides drylin Q drylin Q square linear guides Product overview Linear system with individual housing versions Profile made from hard-anodised aluminium Torque-resistant square design End cap made from solid plastic Main body of the carriage made from clear anodised aluminium Linear movement with torque resistance, completely lubrication-free. The drylin Q linear system offers the user maximum flexibility in the design. Individual housing options such as solid plastic bearings or adjustable complete housings with and without manual clamp are available. Due to the hollow design, the rugged hard-anodised aluminium profile is very light and is suitable for the installation of supply cables. Options for mounting are extensive, among others, using slot nuts; size can also be combined with all / aluminium profiles. 100 % lubrication-free Torque-resistant Adjustable bearing clearance Applied forces from all directions possible Dirt resistance Low vibration and quiet Numerous mounting options Square section rail Material: aluminium, hard anodised Lightweight and corrosion resistant ollow rail design for feeding supply cables Page 1066 Linear carriage Unsupported carriage version with/without manual clamp Numerous fastening options on all sides via slot nuts earing clearance adjustable Page 1067 Sliding elements made from high-performance polymer iglidur J Adjustable Typical application areas Mechanical engineering Wood working industry Machine tools andling Available from stock Detailed information about delivery time online. lock pricing online No minimum order value. From batch size 1. earing carriage Enclosed anodised aluminium housing Apply moments up to 3 Nm (size 10) and up to 10 Nm (size ) Torque-resistant sliding elements made from iglidur J Page 1069 Accessories Supports made from plastic and end caps for aluminium profiles Adapter kit for grippers and sensors Adapter for igus e-chains series E2 micro Page 1072 Max. +90 C Min. - C Technical details on floating bearings, 2:1 Rule, Tightening torque for drylin connections between metal parts Page sizes (10/12/) Rail length: 1,500/3,000 mm Measuring drylin QKM Page 1073 Cantilever axis drylin GRQ miniature linear module Page Online tools and more information 3D-CAD files, prices and delivery time online

112 V Q kt4 kt3 tg1 tg2 E2 Q drylin Q square linear guides drylin Q square linear guides Product range Square section rail drylin Q square linear guides Product range Adjustable linear carriage drylin Q square linear guides Option A W M Q Q W E dq qi Aluminium shaft Metric Square design Installation size Length [mm] Square Linear carriage Adjustable Standard design Installation size D1 2 E1 1 q Part No. Weight q dq qi Max. [kg/m] ±0.02 length AWMQ ,500 AWMQ-12 AWMQ , ,000 tg4 tg3 kt1 kt2 Matching accessories Supports made from plastic Endcaps for square section rails Part No. Weight M max. 1 2 D1 Q E1 E2 tg1 tg2 tg3 tg4 kt1 kt2 kt3 kt4 [g] [Nm] h7 QWE QWE Cost-effective mounting option Can also be used as floating support ts E A 1 Part No. A Q 1 E ts V Q Part No. Q Accessories: Slot nuts Slot nuts offers attachment options (for example sensors) on four sides of the housing. 8 pieces are included in the delivery of a QWE carriage. Part No.: NOR-602 Can be combined with: STZ-Q10-01-FL STZ-Q10-01-C STZ-Q-01-FL STZ-Q-01-C 5 AWMQ-12 AWMQ Online tools and more information 3D-CAD files, prices and delivery time online

113 kt4 kt3 tg1 tg2 E2 Dk Ky drylin Q square linear guides drylin Q square linear guides Product range Adjustable linear carriage with manual clamp drylin Q square linear guides Product range Q pillow block drylin Q square linear guides Options Q W E KA Q J R M T Square Linear carriage Adjustable Standard design Installation size Manual clamp QJRM-05- QJRMT-05- Square iglidur J Closed design Metric Tandem (optional) Compact design Installation size Kz 2 1 E dq dq Qi Qi Qa Qa A E1 E1 d dq Qi Qa A E1 d L L D1 tg4 tg3 Q kt1 kt2 L E2 Part No. Weight M max. 1 2 D1 Q E1 E2 tg1 tg2 tg3 tg4 [g] [Nm] h7 QWE KA QWE-01--KA Part No. 215 kt1 10 kt kt kt Dk Ky Kz QWE KA QWE-01--KA Part No. Weight A 1 dq Qa Qi E1 E2 d L [kg] ±0.02 ±0.15 ±0.15 QJRM-05- QJRMT The clamp thread was developed for simple tasks. The creep behaviour of the plastic causes the clamping force to reduce over time (up to 70%). Therefore no safety-relevant parts may be clamped. Please contact our technical consultant, if you require other options for the clamping. Can be combined with: Can be combined with: AWMQ- AWMQ Online tools and more information 3D-CAD files, prices and delivery time online

114 f f f f f f Qa Qa f f drylin Q square linear guides drylin Q square linear guides Product range Flange bearings drylin Q square linear guides Product range Q10 pillow block drylin Q square linear guides Option Q J F M T Q J R M P QJFMT QJFM Square iglidur J With flange Metric Tandem (optional) design Installation size D2 dn Square iglidur J Closed design Metric Solid plastic Standard design Installation size Q Options: kt 01 = Round flange 02 = Square flange tg tk 1 2, x 2 QJFM-01 QJFM-02 QJFMT-01 QJFMT-02 ts ds db dt d3 dt D E Manual clamp available. Suffix "-KA" ts ds d3 k d2 d2 d2 d2 C d2 d2 Part No. Weight M max. 2 D2 dn E Q tk tg kt [g] [Nm] QJRMP Part No. Weight k d2 f Qa d3 dt db ds ts [kg] h7 ±0.15 ±0.15 QJFM-01- QJFM-02- QJFMT QJFMT-01- QJFMT Pipette unit equipped with drylin Q square linear system combined with drylin GRW cantilever axis and NEMA step motor Can be combined with: Can be combined with: AWMQ-10 AWMQ- AWMQ Online tools and more information 3D-CAD files, prices and delivery time online

115 drylin Q square linear guides drylin Q square linear guides Product range Accessories ollow rail for supply lines (compressed air, cable) Extremely compact A host of possible applications Single components Adapter for flange shaft block Part. No. STZ-Q10-AR Adapter kit e.g. for grippers/sensors Part. No. STZ-Q10-01-AM Supports made from plastic Part. No. STZ-Q10-01-FL STZ-Q10-01-LL Chain connection for e-chain E2 micro Part. No. STZ-Q10-01-AC-E2 End caps for squaresection rail Part. No. STZ-Q10-01-C STZ-Q-01-C 1072 Online tools and more information

116 drylin linear technology digital measuring Ready-to-install complete Sensor, measuring display, magnetic tape included attery operation Ideal for positioning stops Operation without mains supply

117 Digital drylin measuring Advantages Lubrication-free, light, quiet, long service life, cost-effective ard anodised drylin aluminium profiles Suitable for aluminium design profiles Delivered ready to install LCD display with battery Carriages with internal or external display Lubrication-free drylin linear guide with or without a drive Rails fixed or mobile Digital drylin measuring The drylin measuring use magnetic tape with incremental measuring. The integrated battery ensures a service life of many years and enables almost absolute measurement. The sensor, measuring display and magnetic tape are integrated in lubrication-free drylin W and Q linear guide. With customer-specific rail lengths, are supplied as ready-to-install linear modules. Typical application areas are format adjustments and mechanical stop adjustments. Simple installation Easy to adjust Lubrication and maintenance-free attery powered Unsupported use Optional: Mounted rail measuring carriage moves Mounted measuring rail rail moves Typical application areas Format adjustments ending machines and saws Stop-dog positioning for profiles, frames, plates, tubes, wood and bar stock Digital drylin measuring Products overview Profile guides for almost unlimited leeway in design drylin Q for unsupported structures drylin SLW with integrated measuring sensor Carriage with integrated measuring sensor Driven by trapezoidal thread With fixed or flexible adjustable display Programmable display Protected magnetic tape Positioning can be freely adjusted and locked Page 1078 Page 1079 drylin W with digital measuring display drylin W with fixed measuring display Max. rail length up to 4,000 mm Max. rail length up to 2,000 mm Measuring display attached to the side of the carriage Measuring display fixed in place Lubrication-free adjusting of the carriage Moving rail with stationary carriage Page 1080 Page 1080 Freely selectable rails lengths A magnetic tape is used for reference Available from stock Detailed information about delivery time online. lock pricing online No minimum order value. From batch size 1. Max. +70 C Min. -10 C Carriage widths: mm Rail length: up to 4,000 mm drylin W with external measuring display Carriage with integrated sensor Flexible positioning of the measuring sensor Including manual clamp Page 1081 drylin W for external data output Variable sensor type, output power and cable length Cable guide and protection through igus e-chain 1 and 4 edge triggering Page Online tools and more information 3D CAD data, prices and delivery times

118 Digital drylin measuring Technical data Measuring display for series SLWM/QKM Digital drylin measuring Technical data Length measuring system WKMEX Properties Measuring principle Incremental, with zero function Display LCD display 7.5 mm high digits Display accuracy Max. 0.1 mm Display/display area Function Digit direction, decimal point, unit of measurement (mm, imperial), preset activation Power supply attery 1/2 AA, 3.6 V integrated, service life of up to 4 years Magnetic sensor Securely connected (external) Design Installation housing ousing Plastic Protection class IP54 display IP67 sensor Working temperature C umidity 35-85% Speed Max. 2.5 m/s Display keyboard 3 function buttons Properties Measuring principle Incremental Repeatability ± 0.0 mm Measuring principle Linear Pole division 5 mm Sensor housing Zinc die-casting Protection class IP67 Application temperature C earing temperature C Max. humidity 95%, non-condensing Max. speed 4.0 m/s VDC power supply 5 VDC or 10 VDC Current draw 5 VDC: max. 0 ma 10.. VDC: max. 150 ma Evaluation electronics Sensor with integrated evaluation electronics and index impulse Output power 5 V-TTL line driver or 10.. V_TL Source tracks A, A,,, Z, Z Max. cable length 5V/5V-TTL: 10m Max. cable length 10-V/10-V: m 10-V/5V-TTL: 50m Max. permissible distance from magnetic tape 2.0 mm Connection method Open cable ends Measuring display for series WKM/WKMEDR Properties Measuring principle Incremental, with zero function Display Lowest power LCD with integrated sensor, battery operated Display accuracy Max. 0.1 mm Repeatability ± 1 digit Display/display area Function Incremental and reset function Direct input offset value Power supply attery integrated, service life of up to 10 years Magnetic sensor Securely connected Design Installation housing ousing Zinc die-casting Protection class IP overall device IP60 display Page Working temperature C umidity 95% rel. humidity, condensation not permissible Speed Max. 3.5 m/s Magnetic tape for measuring display WKM Properties Encoding Incremental, single-track system asic pole division 5 mm pole division and width 10 mm Operating temperature, processed C Tape structure Magnetic tape stuck on with adhesive tape External magnetic fields on the magnetic tape surface must not exceed External magnetic influence 64 mt (6 Oe; 52KA/m) as this can damage or destroy the magnetic tape encoding Protection class Carrier tape, stainless steel (optional) 1076 Online tools and more information 3D CAD data, prices and delivery times

119 A E2 E E1 d2 f2 1 f1 ha 1 kt h3 drylin digital measuring Digital drylin measuring Product range Integrated measuring Digital drylin measuring Product range Ready-to-install for external data output drylin digital measuring Option Q K M S L W M Square Measuring system Metric Carriage type Installation size drylin SLW linear module Measuring system Installation size SLW linear module Options: Protected magnetic tape 01: Display flexible with angle joint Sensor integrated in the carriage, saving space Attachment options using slot nuts 02: Display fixed in place Operation without mains supply Manual clamp on carriage Integrated magnetic tape Unsupported attachment Extensive accessories available Profile AWMQ- max. length 1,500 mm Technical data Page 1076 Sensor integrated in the carriage, saving space Technical data drylin linear module SLW Technical data Page 1076 Page 1248 b tk ts l2 A Al l + Measuring l + Messlänge length 2 1 E4 E3 Signal cable Q Øts Signal cable lt s lt L QKM-02- QKM-01- Part No. M max. L E Q ts f1 f2 A [Nm] Shaft end support h7 + carriage + stroke QKM-01- QKM stroke stroke Part No. A Al E1 E2 E3 E4 l l2 lt tk kt tsts s ha d2 h3 b SLWM Tr10x Online tools and more information 3D CAD data, prices and delivery times

120 drylin digital measuring Digital drylin measuring Product range Digital measuring with position readout Digital drylin measuring Product range Measuring system with positionable readout display drylin digital measuring WKM, Series 10 and Design WKM R WKMEDR drylin W measuring system Installation size Rail width Carriage length Number of carriages Display right-mounted drylin W measuring system External Display Assembly right sided Installation size Rail width Carriage length E Technical data Page 1077 Part No. drylin Rail profile 89) E WKM L WS WKM R WS WKM L WS WKM R WS ) Profile dimensions Page 904 WKM, Series 11 Lockable carriage Display optionally to the right (R) or left (L) of the guide carriage Max. rail length 4,000 mm (effective measuring length max. 3,757 mm) A2 C2 C4 C5 A Technical WKMEDR data Page 1076 m WKMEDR m A2 2 Energiekette xxx e-chain Energiekette nicht estandteil des Artikels xxx nicht estandteil des Artikels not included A A2 2 K2 K2 (3x) (3x) A Am Tm A2 2 Am Tm Energiekette xxx nicht estandteil des Artikels C2 C2 CC Kh Ah Ch Th WKMEDR m Am Tm Kh Ah Ch Th Kh Kh Sh Ah Ah Sh h Sh h Sh h Ch h Ch WKMEDL WKMEDL Options: R: WMY-01 Attachment to the right of the guide carriage L: Attachment to the left of the guide carriage WMY-01 h WMY-02 Sh WMY-02 Kh Ah Ch Th Kh Sh Ah h Ch Assembly options of the external WKMEDL display WMY-01 WMY-02 min. 6 K1 Cm WS-10- a1 m Kz Part No. K2 (3x) A C2 C A2 C2 K2 2 Am m Tm WidthC Length ±0.17 WKMEDR(L) 90) C L K1 S A 90) Suitable for attachment on the right (R) or left (L) C2 C4 C5 Part No. L C4 C5 a1 C2 A2 K1 C A S Cm m kz max. WKM-11-2, Dimensions Display incl. support [mm] Part No. Ah h Ch Sh Kh Th WMY Ø5,4 22 WMY-02 94, Ø5, Online tools and more information 3D CAD data, prices and delivery times

121 drylin digital measuring Digital drylin measuring Product range Ready-to-install system for external data output /Design WKM EX drylin W measuring system External data output (Shaft Ø) Rail width Rail length 100 mm Cable length [m] Sensor type Number of carriages Rail length [mm] At 4 edge triggering (setting parameters of the display or control system, for example. IW4) and + C Energy chain Not part of the product ambient temperature: resolution: ±( L) L = measurement length in metres; repeatability: ±0.0 mm K2 Signal cable At 1 edge triggering (setting parameters of the display or control system, for example. IW1) and + C ambient temperature: A2 A resolution: ±( L) L = measurement length in metres; repeatability: ±0.0 mm Small sensor with integrated evaluation electronics Output signals: differential mode sustained short circuit-proof with inverted signals (A. A/,, /, Z, Z/) C2 C Technical data Page Part No. 2 C C2 A A2 K2 Resolution WKMEX Versions Sensor version Nominal voltage Output power Max. length of signal cable V 10 V 5 V TL 10 V TTL Line Driver TTL Line Driver m 50 m 10 m To place an order, please add the sensor type to the part number. Order example: WKMEX Online tools and more information

122 drylin linear technology carbon fibre Extremely lightweight and robust Non-metallic Non-magnetic X-ray transparent Lubrication and maintenance-free

123 drylin carbon fibre Advantages Extremely light and 100% lubrication-free Extremely lightweight: drylin carbon fibre drylin carbon fibre Product overview Linear guide and modules made of solid plastic and carbon fibre igh strength carbon made in pultrusion process Tribologically optimised drylin W profile made from carbon fibre Solid plastic carriage made from lubrication-free iglidur L0 Extremely lightweight and yet extremely strong tribologically optimised drylin linear made from plastic and carbon fibre combine these properties. Whether as guide system or linearaxis: All are 100% lubrication-free and maintenance-free. Extremely light Wear-resistant Tough and reliable Non-metallic Non-magnetic X-ray transparent drylin W linear guide system made of carbon/plastic Extremely lightweight and strong carbon profile Tribologically optimised Solid plastic carriage made from iglidur L0 Page 1086 drylin ZLW toothed belt axis made from carbon fibre Absolutely non-metallic Neoprene toothed belt drive with glass fibre reinforcement Max. stroke length 1,000 mm Page 1087 Extreme weight saving % lighter than aluminium 75% lighter than steel Typical application areas Aircraft interior Laboratory and medical technology Measuring technology Available as linear guide system Available in 3-8 days or with drive (lead screw / Detailed information about delivery time online. toothed belt) lock pricing online No minimum order value. From batch size 1. drylin SAW linear module made from carbon fibre drylin STP linear module with round carbon fibre shafts igh strength and resistant Max. +60 C Min. 0 C drylin W profile made from carbon fibre Drive: trapezoidal or high-helix lead screw Lightest version with carbon, solid plastic, aluminium Very lightweight due to carbon hollow shafts and solid plastic Ideal for multi-carriage solutions, also opposite End block use lead screw Configurable with accessories for manual and electric with dry running xiros Page 1088 adjustment ball bearings with Page 1089 balls made of glass or plastic Wear rate [mg/km] drylin CWM round shaft made from carbon fibre Very lightweight due to hollow shaft geometry ollow rail for supply lines Surface UCU (unidirectional/cross-winding/unidirectional) CFK-Profile iglidur L0 Aluminium/ iglidur J Steel/ iglidur J Stainless steel/ iglidur J Page Online tools and more information 3D-CAD files, prices and delivery time online

124 drylin carbon fibre drylin W carbon fibre Product range Linear guide system extremely lightweight and strong drylin ZLW carbon fibre Product range elt drive axis non-metallic drylin carbon fibre Complete Set / / W K P C ZLW-06 -P-1000 drylin W Complete Set Plastic Carbon fibre Shafts-Ø Rail width Carriage length elt drive axis Shafts-Ø Rail width Plastic Stroke length I + stroke C C2 fi da A2 A a nh X Y b A1 Connecting dimensions d nh T2 nw dp L h h1 T1 hc n nb AP Lp Technical data - guide rail Part No. F Max. radial Weight Iy Iz stat. dyn. [N] [N] [g/m] [mm 4 ] [mm 4 ] WSPC ,391 11,674 Technical data Part No. Weight Weight Max. stroke asic 02 P without stroke [kg] 100 mm stroke [kg] length X Transmission E Tooth profile elt drive -material -width -tension [mm] [mm/rev] [mm] [N] , TD 3M Neoprene with GF 9 - guide profile Part No. a b da h h1 nh X Y L -0.1 WSPC ,000 - guide carriage Part No. A1 A A2 C C2 WWPL Part No. A AI E2 E3 l R f lt ha lz l2 d2 0.3 ±0.15 ±0.15 ± h9 ZLW-06-P Connecting dimensions Part No. X E AP Lp dp d T1 T2 ± ± ZLW-06-P variable Online tools and more information 3D-CAD files, prices and delivery time online

125 f drylin carbon fibre drylin SAW carbon fibre Product range Linear module with high profile carbon fibre lightweight and robust Complete Set drylin STP carbon fibre Product range Linear module with carbon fibre hollow shafts ideal for multi-carriage solutions Complete Set drylin carbon fibre / / SAW-06 -P-0 STP CWM lt Al E2 lt ts ts d2 T D-D E1 l2 l2 D D d Øs sg I + stroke l+ub tk f ha drylin linear module Shafts-Ø Rail width Plastic Stroke length Linear module Plastic Design Dimension Carbon fibre shaft d2 lt hw Al lt E6 E2 E5 ha l2 d2 T E1 l + ub I + stroke A D D d d T E2 sg lc E3 Øtk Øts tk E1 R Technical data Part No. Stroke length Weight Max. speed Max. static load capacity Standard additional [mm] [kg] per 100 mm [kg] [1/min] axial [N] radial [N] SAW-06-P , Technical data Part No. STP CWM STP CWM Max. stroke Carbon fibre shaft More information length Weight additional [kg] [mm] [kg] (per 100 mm) Liners and lead screw nuts made from iglidur J earing and nut integrated into the carriage Part No. A AI E1 E2 E3 E5 E6 l lc hw f lt 0.3 ±0.15 ±0.15 ±0.15 ±0.1 SAW-06-P Part No. tk ts sg d T l2 d2 ha ø SAW-06-P Tr8x Part No. A AI E1 E2 l R f lt tk ts ± STP CWM STP CWM Part No. s sg d T l2 d2 99) ha Max. static load capacity axial radial [N] [N] STP CWM STP CWM Tr10x2 Tr10x Tr10x2 Tr10x ) Lead screw end unmachined (standard) 1088 Online tools and more information 3D-CAD files, prices and delivery time online

126 drylin carbon fibre drylin carbon fibre Product range Carbon fibre hollow shaft Material: CFK Composite Roundness tolerance: ± 0.05 mm Diameter tolerance: mm Application temperature: Max. +80 C CWM Carbon fibre shaft Metric Outer Ø Shaft length Part No. Design Diameter Max. length Weight CWM-12 CWM-16 CWM- CWM- 0.1 [g] ollow shaft 12/9 2, ollow shaft 16/12.5 2,000 1 ollow shaft /16 2, ollow shaft /26 2, Online tools and more information

127 drylin linear technology products made from stainless steel Temperature resistant up to +0 C Corrosion-free Resistant to chemicals Ready-to-install linear guides and modules Lubrication and maintenance-free

128 drylin stainless steel Advantages drylin R plain bearings Product range Closed stainless steel adapter made from 1.45 drylin stainless steel Machine parts made from stainless steel are designed to survive in the worst environments. eat, pressure, seawater, liquid and gaseous media like detergents and other chemicals. If these machine parts also have to work as a bearing, the combination with iglidur high-performance polymers is ideal. All bearings are lubrication-free, maintenance-free and dry running. 1 d2 Option R J U M ES The suitable iglidur material can be selected according to the application and used for linear and/or rotary motions. Lubrication-free Temperature resistant up to +0 C Corrosion-free Resistant to chemicals Cost-effective Secured by circlips dn s Closed iglidur J Liner Metric Standard Stainless steel 78) According to igus -testing method Page ) Design standards Page 980 The use of and 1.41 makes of the guides resistant to seawater and chemical contact corrosion, and the guide shafts are also made from Despite the lack of surface hardness, required for instance by recirculating ball bearings, they are suitable for use with plain bearings. The large loading surface of a bearing diminishes the surface pressure to a mostly safe value Typical application areas Food and bottling industry Meat processing arbour and crane facilities Yacht building Chemical industry Electroplating industry Medical and rehabilitation technologies Packaging industry Please note: Installation instructions Technical data Page 981 Part No. -Tolerance 78) F max. dynamic 82) F max. static 82) Weight P = 5 MPa P = 35 MPa [mm] [N] [N] [g] RJUM ES RJUM ES RJUM-01--ES RJUM-01--ES RJUM-01--ES ,4 2,0 3,6 5,100 6,7 10,080 15,750,375 35, d2 1 s dn h7 h h Part No. RJUM ES RJUM ES RJUM-01--ES RJUM-01--ES RJUM-01--ES Lubrication freedom with drylin for a baking and conveyor unit drylin W guide rails are accredited to Cleanroomstandards and therefore used in this blister machine. Available with drylin liners (optional: J0/A180): J E7 X 1092 Online tools and more information 3D-CAD files, prices and delivery time online

129 drylin stainless steel drylin W profile guides Product range Single rail round, made from stainless steel V4A drylin W profile guides Product range Double rail round drylin stainless steel C1 C1 K1 C3 A3 K1 C3 da da A2 A3 A G1 C6 C4 C5 G2 L C6 C4 C5 L Material for housing and shaft support 1.48 (AISI 316) Shaft material (AISI 316Ti) K3 K2 Q2! Coz-! Coz- h h2 Q1 10- Material for housing and shaft support 1.48 (AISI 316) y K2 b y x z! Coz- Material for shaft, shaft support, housing (AISI 316Ti) A1 a h1 Shaft material (AISI 316Ti) Material for shaft, shaft support, housing (AISI 316Ti) K3 h a h2 Technical data and dimensions [mm] Part No. Weight 57) da L a h h1 h2 G1 G2 A1 Q1 Q2 ± Max. 0.3 [kg/m] WS-10-ES-FG WS-16-ES-FG WS--ES-FG WS--ES ,000 3,000 3,000 3, ,5 58) Technical data and dimensions [mm] Part No. Weight 57) da L a b h h2 A A2 [kg/m] ±0. h9 Max. 0.3 WS-10--ES-FG , Part No. C1 C3 C4 C5 C5 C6 C6 A3 K1 for ly lz Wby Wbz Min. Max. Min. Min. screw DIN 912 [mm 4 ] [mm 4 ] [mm 3 ] [mm 3 ] WS-10-ES-FG WS-16-ES-FG WS--ES-FG ) 491 3,217 7, ,217 7, WS--ES M10 19,175 19,175 1,534 1,534 Part No. C4 C5 C5 C6 C6 K1 Min. Max. Min. Max. for screw DIN 912 WS-10--ES-FG ) eight dimension minus the bearing clearance tolerance 57) eight dimension minus the bearing clearance tolerance 58) With plain holes Can be combined with: Suitable liner materials: WJ0UM(T)-... WJ0UME-... WJUM-..-ES-FG WJRM-... iglidur J iglidur E7 iglidur A Online tools and more information 3D-CAD files, prices and delivery time online

130 drylin stainless steel drylin W profile guides Product range ousing bearing, made from V4A stainless steel drylin W hybrid bearings Product range ybrid bearing made form stainless steel drylin stainless steel WJRM-01 with a single roller Design W J UM ES-FG C1 C3 A3 Material WJRM ES G1 drylin W iglidur J liner ousing bearing, round Standard 10 Stainless steel Precision casting K3 A1 K2 2 ybrid bearings Single roller bearing 10 Stainless steel Material ES: Stainless steel (AISI 316Ti) ES-FG: Stainless steel precision Material casting 1.48 ES: Stainless steel (AISI 316Ti) ES-FG: Stainless steel precision casting 1.48 WJRM-21 with double roller Material A1 K2 WJRM ES ybrid bearings Double roller bearing Stainless steel Material ES: Stainless steel (AISI 316Ti) ES-FG: Stainless steel precision casting 1.48 Technical data and dimensions [mm] Part No. Weight C1 C3 A3 K2 K3 Stat. load capacity Flat-head Coy Coz+ Coz- [g] screw [N] [N] [N] WJUM ES-FG 59) WJUM ES-FG 59) WJUM-01--ES-FG 59) WJUM-01--ES 59) M10 M5 3,800 6,900 11,000 16,000 3,800 6,900 11,000 16, ,450 1,900 3,600 59) Alternative with XUMO liners for high temperatures available. 59) alternative with XUMO liners for high temperatures available. Part No. WXUM Technical data and dimensions [mm] Part No. Static load Dyn. load capacity Cz+ F v capacity Co at total running distance [km] Max. [N] [N] [N] [N] [N m/s] WJRM ES-FG WJRM-21--ES-FG Part No. Coefficient Weight A1 A3 2 C1 C3 G1 K2 for of friction in thread z-direction [µ] [g] WJRM ES-FG WJRM-21--ES-FG < 0.1 < Can be combined with: WS-... WS-..-ES-FG-... WS-... WS-...-ES-FG WSX Online tools and more information 3D-CAD files, prices and delivery time online

131 drylin stainless steel drylin shafts Product range Stainless steel shafts drylin shafts Product range Materials 1.41, 1.34, 1.41, drylin stainless steel Options E W M EWM EEWM EWMR Steel shaft Metric Outer Ø Shaft length [mm] igus recommendation: linear bearings equipped with iglidur E7 liners for 8 times longer service life Completely supported and mounted with standard aluminium support For supported shafts: Shaft support supplied in lengths of 600 mm max. Standard pitch T2, T1 also possible upon request ole pitches symmetrical C5 = C6 hardened stainless steel 1.41 Part No. d Weight Max. length Effective hardness depth [kg/m] (at 1.41) EWM-06 88) EWM-08 88) EWM-10 88) EWM-12 EWM-16 EWM- EWM- EWM- EWM- EWM ,000 4,000 4,000 6,000 6,000 6,000 6,000 6,000 6,000 6, ) Material X90 (1.4112) Available shaft materials: 1.41 or , hardened/ground EWM 1.34, hardened/ground EEWM 1.41, drawn EWMR , drawn EWMS hardened stainless steel 1.34 Part No. d Weight Max. length Effective hardness depth [kg/m] (at 1.34) EEWM-06 EEWM-08 EEWM-10 EEWM-12 EEWM-16 EEWM- EEWM- EEWM- EEWM- EEWM ,000 4,000 4,000 6,000 6,000 6,000 6,000 6,000 6,000 6, stainless steel 1.41 (EWMR) or soft stainless steel (EWMS) Part No. d Weight Max. length [kg/m] EWMR-10 EWMS-10 EWMR-12 EWMR-16 EWMR- EWMS- EWMR- EWMR ,000 4,000 6,000 6,000 3,000 6,000 6,000 6,000 Order example: EWM : stainless steel shaft (1.41), outer-ø 16 mm, 500 mm length 1098 Online tools and more information 3D-CAD files, prices and delivery time online

132 drylin stainless steel drylin shafts Product range Supported stainless steel shafts drylin shafts Product range Low level supported stainless steel shafts drylin stainless steel 145 D M Options E W U M N T1 EWUM N2 ø N1 ( ) E V EWUMN Low level supported stainless steel shaft, metric Outer Ø Shaft length [mm] ole pattern igus recommendation: linear bearings equipped with iglidur E7 liners for 8 times longer service life Shaft support blocks for Ø mm made from stainless steel VA Connecting dimensions as standard supports made from aluminium C5 T1/T2 C6 EWUM: Supported stainless steel shaft EWUMN: Low level supported stainless steel shaft Available materials and shafts: 1.41 (AISI 4C), max. 6,000 mm ole pattern T2: T2 pitch (standard) T1: T1 pitch (upon request) supported stainless steel shafts 1.41 Part No. D V N1 N2 M (º) E T1 87) C5/C6 T2 C5/C6 Weight Min. Max. Min. Max. for T2 ±0.02 ±0.15 for T1 Standard Standard [kg/m] EWUM-12 EWUM EWUM EWUM EWUM- EWUM- EWUM ) Pitch T1 upon request; standard is T2 low level supported stainless steel shafts 1.41 Part No. d 1 A A1 A2 d2 T C5/C6 Weight ±0.02 ±0.02 Min. Max. [kg/m] EWUMN-12 EWUMN-16 EWUMN- EWUMN- EWUMN- EWUMN- EWUMN M4 M5 M10 M12 M Low level supported shafts are delivered unmounted. Order example: EWUM T1: supported stainless steel shaft (1.41), outer-ø 16 mm, 500 mm length, T1 pitch Order example: EWUMN : low level supported stainless steel shaft (1.41), outer-ø 16 mm, 500 mm length 1100 Online tools and more information 3D-CAD files, prices and delivery time online

133 drylin stainless steel drylin shafts Product range Partially supported stainless steel shafts drylin shafts Product range drylin stainless steel D F Ø V Options E W U M S - ES T1 EWUM-ES/ EWUMS-ES (ϒ) E Partially supported stainless steel shaft, metric Material Outer Ø Shaft length [mm] ole pattern igus recommendation: linear bearings equipped with iglidur E7 liners for 8 times longer service life Shaft support blocks for Ø mm made from stainless steel VA Connecting dimensions as standard supports made from aluminium C5 G T1/T2 C6 Available materials and lengths: 1.41 (AISI 4C), max. 6,000 mm EWUM (AISI 316T1), max. 3,000 mm EWUMS Options blank: 1.41 material S: material ole pattern T2: T2 pitch (standard) T1: T1 pitch partially supported stainless steel shafts 1.41 Part No. D V E ϒ F G T1 C5/C6 T2 C5/C6 h6 ±0.02 for T1 Standard for T2 Min. Max. Min. Max. EWUM-ES-12 EWUM-ES-16 EWUM-ES- EWUM-ES- EWUM-ES- EWUM-ES T2 pitch = standard, T1 upon request partially supported stainless steel shafts 1.41 Part No. D V E ϒ F G T1 C5/C6 T2 C5/C6 h6 ±0.02 for T1 Standard for T2 Min. Max. Min. Max. EWUMS-ES-12 EWUMS-ES-16 EWUMS-ES- EWUMS-ES- EWUMS-ES- EWUMS-ES T2 pitch = standard, T1 upon request Order example: EWUM-ES--500: partially supported stainless steel shaft, 1.41 material, T2 pitch (standard), outer-ø mm, 500 mm length Order example: EWUMS-ES--500-T1: partially supported stainless steel shaft, material, T1 pitch, outer-ø mm, 500 mm length 1102 Online tools and more information 3D-CAD files, prices and delivery time online

134 drylin stainless steel drylin ST linear modules Product range ygienic design drylin SLW linear modules Product range Made of stainless steel drylin stainless steel complete Page 1244 complete Page 18 Shaft Option Stainless steel version with STC - - EWM - YD corrosion resistant steel components (1.45, 1.48 or SLW - ESJ ) Easily cleaned solution Wide gaps Materials: plastic and VA stainless steel Flexible Installation size Shaft material ygienic Design Choice of bearing material: iglidur J = Standard iglidur A180 = FDA-compliant iglidur X = igh temperature up to +150 C 117) Available accessories Page 1357 T Compact Stainless steel iglidur J-bearings Installation size Lead screw nuts made of FDA-compliant iglidur A180 Available accessories Page 1357 d I + stroke Technical data l + stroke The lead screw linear unit can be delivered with complete FDA-conform Materials. Part No. Shafts-Ø Max. stroke Weight Additional Max. stat. load capacity length (per 100 mm) [mm] [mm] [kg] [kg] axial [N] radial [N] SLW-ESJ-10 SLW-ESX-10 SLW-ESA SLW-ESJ-80 SLW-ESA ,000 1, ,600 1,600 2,800 2,800 2,800 6,0 6,0 Part No. A Al E1 E2 I R f It ts d T I2 d2 ha 0,3 0,3 ±0,15 ±0,15 STC--EWM-YD Tr18x h9 23 Part No. A AI E1 E2 E3 l hw f lt tk ts tg ±0.15 ±0.15 ±0.15 SLW-ES-10 SLW-ES M10 Part No. kt s sk sg kq d T l2 d2 ha SLW-ES-10 SLW-ES-80 ±0.1 Standard Tr10x2 17 Tr10x2 92) Tr18x h ) Lead screw end unmachined 117) In the event of severe temperature fluctuations during transport, storage and use, thermal expansion effects cannot be ruled out 1104 Online tools and more information 3D-CAD files, prices and delivery time online

135 drylin stainless steel drylin SLW XY-table Product range XY-table stainless steel version My sketches Page 1243 For manual adjustments igh torsional stability Structure entirely made from VA and V4A stainless steel materials Chemical and corrosion resistant Available accessories Page 1357 ly + Stroke in mm left lb A L R lx + Stroke in mm right AI x y Part No. SLW-XY-ESJ-10 Max. stroke length A Al E1 E2 asic length asic length f lt tk ts tg kt [mm] 0.3 ±0.15 ±0.15 lx ly ± Part No. sg d T l1 l2 d2 d2 ha1 ha2 W SLW-XY-ESJ-10 Standard Alternative Standard Alternative ha2ha1 10 Tr10x2 17 Tr10x2 6 h9 17 Tr10x2 6 h The hand wheel can be ordered left- or right-mounted in the y-direction. Left: SLW-XY-ESJ-10-L-0-0 for 0 mm stroke length on the x-axis and 0 mm on the y-axis Right: SLW-XY-10-R-0-0 for 0 mm stroke length on the x-axis and 0 mm on the y-axis 1106 Online tools and more information 3D-CAD files, prices and delivery time online