drylin Stainless Steel

Transcription

1 drylin Stainless Steel Lubrication-free Temperature-resistant up to +250 C Corrosion-resistant Chemical-resistant Standard parts with short 995

2 drylin Stainless Steel Machine parts made of are designed to survive in the worst environments. Heat, pressure, seawater, liquid and gaseous media like detergents and other chemicals. If these machine parts also have to work as a bearing, the combination with iglidur high-performance polymers is ideal. All bearings are lubricant-free and the plastic parts are secured axially and radially in the housings with positive fit. The suitable iglidur material can be selected according to the application and used for linear and/or rotary motions. lubricant-free temperature-resistant up to +250 C corrosion-resistant resistant to chemicals cost-effective The use of and s mean that the range is resistant to both sea water and aggressive chemicals. Even though these s are not hardened, they can still be used with igus bearing materials. In addition, the large surface area of a drylin bearing helps to keep the surface pressure to a very low level. Industries and application areas: food and bottling industry meat processing harbor and crane facilities yacht building chemical industry electroplating industry medical and rehabilitation technologies packaging industry Lubrication freedom with drylin for a baking and conveyor unit. drylin W is accredited to Cleanroom-standards and therefore used in this blister machine. 996 More information

3 drylin R Linear Plain Bearing Product Range drylin - Closed adapter Order key B B1 d2 d1 RJUM ES dn s Stainless Steel Diameter Standard Metric Liner Material iglidur J Closed Dimensions corresp. to the standard for recirculating ball bearings Technical Data * according to igus testing method page 925 ** design standards page 926 Please note: Installation instructions page 877 Part number Shaft Tolerance* F max. F max. Weight Ø bearing inner dynamic** static** diameter P = 5 MPa P = 35 MPa [mm] [mm] [N] [N] [g] RJUM ES , RJUM ES ,440 10, RJUM ES ,250 15, RJUM ES ,625 25, RJUM ES ,100 35, Dimensions [mm] Part number d1 d2 B B1 s dn h7 h10 H10 H10 h10 RJUM ES RJUM ES RJUM ES RJUM ES RJUM ES Also available with liners: JUM-11 XUM-01 from stock igus (UK) Ltd Phone (01604) Fax -245 sales@igus.co.uk 997

4 drylin W Modular Guide Systems Product Range Double rail and housing bearing, round made of V4A C1 K1 C3 Material for housing and shaft support Shaft K3 B K2 b h y x z! Coz- h2 da A3 A2 A C6 C4 C5 L H a drylin W Guide Rail, Double, Ø 10 mm Dimensions [mm] Part number Weight H da L a b h h2 A A2 [kg/m] ±0.07 h9 max. 0.3 WS ES-FG , Part number C4 C5 C5 C6 C6 K1 for min. max. min. max. Screw DIN 912 WS ES-FG M6 drylin W Housing Bearing Load Data and Dimensions [mm] Part number Weight B C1 C3 A3 K2 K3 Stat. Load Capac. Countersunk Coy Coz+ Coz- [g] head screw [N] [N] [N] WJUM ES-FG* M6 M5 3,800 3, * alternative with XUMO liners for high temperatures available Part number: WXUM ES-FG 8 14 days 998 Life calculation, CAD files and much more support

5 drylin W Modular Guide Systems Product Range drylin - Single rail and housing bearing, round made of V4A K1 C1 C3 da G1 A3 C6 C4 C5 G2 L K2 B Q2! Coz-! Coz- Material for housing and shaft support K3 h h2 H Q1 Shaft A1 a h1 drylin W Guide Rail, Single Dimensions [mm] Part number Weight H* da L a h h1 h2 G1 G2 A1 Q1 Q2 ± max. 0.3 [kg/m] WS-10-ES-FG New! , WS-16-ES-FG New! , WS-20-ES-FG , Part number C4 C5 C5 C6 C6 K1 for ly lz Wby Wbz min. max. min. min. screw DIN 912 [mm 4 ] [mm 4 ] [mm 3 ] [mm 3 ] WS-10-ES-FG New! M6** WS-16-ES-FG New! M8 3,217 3, WS-20-ES-FG M8 7,854 7, * Height dimension minus the bearing clearance tolerance ** Through bore-hole drylin W Housing Bearing Load Data and Dimensions [mm] Part number Weight B C1 C3 A3 K2 K3 Stat. Load Capac. Countersunk Coy Coz+ Coz- [g] head screw [N] [N] [N] WJUM ES-FG* New! M6 M5 3,800 3, WJUM ES-FG New! M8 M6 6,900 6,900 1,450 WJUM ES-FG** M8 M6 11,000 11,000 1,900 * alternative with XUMO liners for high temperatures available, Part number: WXUM ES-FG ** alternative with XUMO liners for high temperatures available, Part number: WXUM ES-FG igus (UK) Ltd Phone (01604) Fax -245 sales@igus.co.uk 999

6 drylin Shafts Product Range Stainless Steel Shafts EWM-06- Length Outer-Ø Metric Material: EWM EEWM EWMR EWMS Available shaft materials: Stainless (1.4125), hardened/ground Stainless (1.4034), hardened/ground Stainless ( oder ), drawn Stainless (1.4112), hardened/ground Even totally supported with standard aluminum support For supported shafts: Shaft support supplied in lengths of 600 mm max. Two hole pitches are available, T2 (standard) or T1 Hole pitches symmetrical C5 = C6 Dimensions [mm] Hardened Stainless Steel Part number d Weight Max. length Effective hardness depth [kg/m] (at ) EWM-06* , EWM-08* , EWM-10* , EWM , EWM , EWM , EWM , EWM , EWM , EWM , * Material X90 (1.4112) 3 8 days 1000 Life calculation, CAD files and much more support

7 drylin Shafts Product Range drylin - Stainless Steel Shafts Dimensions [mm] Hardened Stainless Steel Part number d Weight Max. length Effective hardness depth [kg/m] (at ) EEWM , EEWM , EEWM , EEWM , EEWM , EEWM , EEWM , EEWM , EEWM , EEWM , Dimensions [mm] Stainless Steel (EWMR) or Soft Stainless Steel (EWMS) Part number d Weight Max. length [kg/m] EWMR ,000 EWMS ,000 EWMR ,000 EWMR ,000 EWMR ,000 EWMS ,000 EWMR ,000 EWMR ,000 Order example: EWM corresponds to a shaft 16 mm Ø , 500 mm in length. 3 8 days igus (UK) Ltd Phone (01604) Fax -245 sales@igus.co.uk

8 drylin Shafts Product Range Supported Stainless Steel Shafts EWUM EWUMN 145 D M ød1 H N2 N1 ( ) E B V C5 T1/T2 C6 Dimensions [mm] Supported Stainless Steel Shafts Part number D B H V N1 N2 d1 M (º) E T1* C5/C6 T2 C5/C6 Weight min. max. for T2 min. max. ±0.02 ±0.15 for T1 Standard Standard [kg/m] EWUM EWUM EWUM EWUM EWUM EWUM EWUM * Two hole pitches are available, T2 (standard) or T1 Dimensions [mm] Low Level Supported Stainless Steel Shafts Part number d H H1 A A1 A2 d1 d2 T C5/C6 Weight ±0.02 ±0.02 min. max. [kg/m] EWUMN M EWUMN M EWUMN M EWUMN M EWUMN M EWUMN M EWUMN M Low level supported shafts are delivered unmounted. Order example: EWUMN corresponds to a low level supported shaft (1.4125) 16 mm Ø, 500 mm in length. 3 8 days 1002 Life calculation, CAD files and much more support

9 drylin Shafts Product Range drylin - Partially supported shafts Order key EWUM-ES-20- Length Outer-Ø D F Stainless VA Metric Shaft support blocks Ød1 (ϒ) E B G V H Shaft support blocks for Ø 20 mm made of VA Connecting dimensions as standard shaft supports in aluminum High corrosion and chemical resistance Best addition for shafts Available shafts in and Possible lengths: EWUM (1.4125) max. 6,000 mm EWUMS (1.4571) max. 3,000 mm C5 T1/ T2 C6 Dimensions [mm] Part number Shaft material D B H V d1 E ϒ F G T1 C5/C6 T2 C5/C6 h6 ±0.02 for T1 for T2 min. max. min. max. EWUM-ES EWUMS-ES days igus (UK) Ltd Phone (01604) Fax -245 sales@igus.co.uk

10 drylin SHT Delivery Program Trapezoidal Thread SHTC-HYD Hygienic design Order key complete page 1033 SHTC-20-EWM-HYD Hygienic Design Shaft material Dimension Module Based on the hygienic design idea, this version offers an easily cleaned solution. The screw connections are raised with no dirt traps, and any gaps are intentionally wide. The materials used are plastic and VA. I + stroke The lead screw unit can be supplied completely with FDA-approved materials. Dimensions [mm] Part number A Al H E1 E2 I R f It ts d T I2 d2 ha ±0.15 ±0.15 SHTC-20-EWM-HYD TR 18 x h9 23 Available accessories page 1065 Assembly in combination with following bearing materials: iglidur J Standard up to +90 C iglidur X for temperatures up to +250 C High chemical resistance iglidur A180 for applications with food contact (FDA) from stock 1004 Life calculation, CAD files and much more support

11 drylin SLW Delivery Program Trapezoidal Thread drylin - SLW-ES Stainless Stainless version with corrosion-resistant components (1.4305, or ) Choice of bearing material: iglidur J = Standard iglidur A180 = FDA iglidur X = High temperature Available accessories page 1065 Order key complete page 1046 SLW-ESJ-1040 Dimension Bearing material iglidur J Stainless Steel Compact d T l + stroke Technical Data Part number Shaft-Ø Max. stroke Weight Additional Max. static length (per 100 mm) load capacity [mm] [mm] [kg] [kg] axial [N] radial [N] SLW-ESJ ,800 SLW-ESX ,800 SLW-ESA ,800 SLW-ESJ , ,600 6,400 SLW-ESA , ,600 6,400 Dimensions [mm] Part number A AI H E1 E2 E3 l hw f lt tk ts tg ±0.15 ±0.15 ±0.15 ±0.1 SLW-ES M8 SLW-ES M10 Part number kt s sk sg kq d T l2 d2 ha ±0.1 Standard SLW-ES M TR10x2 17 TR10x2* 14.5 SLW-ES M TR18x h * lead screw end unmachined 8 14 days igus (UK) Ltd Phone (01604) Fax -245 sales@igus.co.uk

12 drylin SLW Delivery Program Cross Slide SLW compact XY-table For manual adjustments Flat and compact High torsional stability stiffness Complete design with % lubrication-free Chemical- and corrosion-resistant Available accessories page 1065 ly + stroke in mm left L R lx + stroke in mm right x y Dimensions [mm] Part number A H E1 E2 Base Base f lt tk ts tg kt length length -0.3 ±0.15 ±0.15 lx ly ±0.1 SLW-XY-ESJ M8 6.4 Dimensions [mm] Part number sg d T l1 d1 d1 l2 d2 d2 ha1 ha2 W Standard Alternative Standard Alternative ha2 ha1 SLW-XY-ESJ-1040 M6 10 TR 10 x 2 17 TR 10 x 2 6 h9 17 TR 10 x 2 6 h The hand wheel on the y-axis can be ordered fitted to the left or the right side. Left: SHT-XY-ESJ-1040-AWM-L for 200 mm stroke length on the x-axis and 300 mm on the y-axis Right: SHT-XY-ESJ-1040-AWM-R for 200 mm stroke length on the x-axis and 300 mm on the y-axis 8 14 days 1006 Life calculation, CAD files and much more support