DryLin Linear Slide Tables - HTS SLWE-BB - With ball bearing lead screw supports

Transcription

1 - HTS SLWE-BB - With ball bearing lead screw supports SLWE-BB linear table uses ball bearings to carry loads in the axial direction, making them ideal for high PM applications Linear guide and lead screw absolutely lubrication-free. Compact and low profile linear actuator for manual or motor drive and higher dynamics. Lower drive force Optimized clearance Up to 1,500 rpm (depending on length and load) Quiet operation Available accessories Part No. End blocks Carriages Lead screw SLW-1040-BB Anodized AL Zinc* **Mild Steel *Aluminum optional **Stainless Steel optional l + Stroke Technical Data Part No. Maximum Base Additional Max. static Maximum Maximum stroke weight weight load capacity spindle speed feed speed (mm) (kg) (kg/100 mm) axial (N) radial (N) (1/min.) (m/min.) SLWE-BB , SLWE-BB ,000 1, SLWE-BB ,800 1, SLWE-BB ,250 5,000 1, Part No. A AI H E1 E2 E3 I hw f lb tk ts ±0.15 ±0.15 ±0.15 ±0.1 SLW-BB SLWE-BB SLWE-BB SLWE-BB Part No. tg kt s sk sg kq d T l2 d2 d2* ha ±0.1 Standard Optional SLWE-BB-0630 M M T08x15 15 T08x SLWE-BB M M T10x12 17 T10x12 6h SLWE-BB M M T14X4 20 T14X4 8h SLWE-BB M M T18x h *ends may be journaled

2 Linear Slide Table SLWS - Hi-helix Lead Screw Tables Based on our innovative W double rail system, the SLWS offers a fully supported rail with resistance to twisting and deflection. Part No. End blocks Carriages Lead screw SLWS-0630 Plastic Zinc* Stainless Steel SLWS-1040 Zinc* Zinc* Stainless Steel SLWS-1080 Aluminum Zinc* Stainless Steel SLWS-2080 Aluminum Zinc* Stainless Steel *Aluminum optional Hand wheel option Can be assembled with Turn-To-Fit For clearance adjustment see page Length and weight (mm) Part No. Maximum Linear Shaft Additional Max. static stroke length travel weight weight load-bearing capacity (mm) mm/rev (kg) (kg/100mm) axial (N) radial (N) SLWS SLWS / /100 1} 600/400 SLWS / / /400 SLWS ) Dependent on screw pitch 10x12 or 10x50 PDF: CAD: ohs info: Part No. A AI** H E1 E2 E3 I hw f tk ts tg ±0.15 ±0.15 ± SLWS SLWS M8 SLWS M8 SLWS M10 Part No. kt s sk sg kq d T l2 d2 d2 ha ±0.1 Standard Optional SLWS M x x SLWS M x12/10x x12/10x50 6h SLWS M x12/10x x12/10x50 6h SLWS M x h * end of lead screw not machined/journaled ** Carriages also available in 100, 150, 200 and 250 mm lengths 50.15

3 Linear Slide Table - HTS SLWE-PL Preload The new preload version SLWE-PL linear slide table offers and additional benefit to the standard systems. In the preloaded version the axial clearance is adjusted by two trapezoidal nuts. The carriage can be adjusted manually by a set screw. Hand wheel option available at additional cost Length and weight (mm) Part No. Maximum Linear Shaft Additional Max. static stroke length travel weight weight load-bearing capacity (mm) mm/rev (kg) (kg/100mm) axial (N) radial (N) SLWE SLWE SLWE SLWE Part No. A AI** H E1 E2 E3 I hw f tk ts tg ±0.15 ±0.15 ± SLWE M8 SLWE M8 SLWE M10 SLWE M10 Part No. kt s sk sg kq d T l2 d2 d2 ha ±0.1 Standard Optional SLWE M T10x2 17 T10x2* 6h SLWE M T10x2 17 T10x2* 6h SLWE M T14x4 20 T14x4* 8h SLWE M T18x h * end of lead screw not machined/journaled ** Carriages also available in 100, 150, 200 and 250 mm lengths 50.16

4 Linear Slide Table -HTS SLW - Compact XY-table SLW-XY-0630 SLW-XY-1040 SLW-XY-1080 I + Stroke L x y I + Stroke Can be assembled with Turn-To-Fit for clearance adjustment (size 1040 only) PDF: CAD: ohs info: Part No. End blocks Carriages Lead screw Maximum stroke SLW-XY-0630 Plastic Zinc* Stainless Steel 300 SLW-XY-1040 Zinc* Zinc* Mild Steel** 750 SLW-XY-1080 Aluminum Zinc* Mild Steel** 750 *Aluminum optional **Stainless Steel optional Part No. Linear A H E1 E2 Basic Basic f tk ts tg kt travel/rev 0.3 ±0.15 ±0.15 length length ±0.1 (mm) (mm) (mm) (mm) (mm) lx (mm) ly (mm) (mm) (mm) (mm) (mm) (mm) SLW-XY SLW-XY M8 6.4 SLW-XY M8 6.4 Part No. sg d T I1 d1 d1 I2 d2 d2 ha1 ha2 W standard optional standard optional ha2 ha1 (mm) (mm) (mm) (mm) (mm) (mm) SLW-XY-0630 M4 5 M8 15 M8 NA 15 M8 NA SLW-XY-1040 M6 10 T10x2 17 T10x2 6h9 17 T10x2 6h SLW-XY-1080 M6 10 T10x2 17 T10x2 6h9 17 T10x2 6h The hand wheel on the y-axis can be ordered installed on the left or the right side. Order example for left SLW-XY-1040-L for 200 mm stroke length on the x-axis and 300 mm on the y-axis. Order example for left SLW-XY for 200 mm stroke length on the x-axis and 300 mm on the y-axis. Lifetime calculation, CAD files online:

5 - HTS SLW-ES - Stainless Steel Stainless steel version with corrosion-resistant steel components Choice of bearing material: - iglide J - standard - iglide A180 - FDA - iglide T500 - high temperature up to 482 F Available accessories STAINLESS STEEL Can be assembled with Turn-To-Fit For clearance adjustment see page Part No. A AI** H E1 E2 E3 I hw f tk ts tg ±0.15 ±0.15 ± SLW-ES M8 SLW-ES M10 Part No. kt s sk sg kq d T l2 d2 d2 ha ±0.1 Standard Optional SLW-ES M T10x2 17 T10x2* 6h SLW-ES M T18x h * end of lead screw not machined/journaled ** Carriages also available in 100, 150, 200 and 250 mm lengths Length and weight (mm) Part No. Maximum Linear Lead screw Shaft Additional Max. static stroke length travel/rev diameter weight weight load-bearing capacity (mm) (mm) (mm) (kg) (kg/100mm) axial (N) radial (N) SLW-ESJ SLW-ESX SLW-ESA SLW-ESJ SLW-ESA N =.225 lbs

6 SLW - Compact XY-table, stainless steel L For manual adjustments Flat and compact High torsional stability stiffness Complete design with stainless steel % lubrication-free Chemical and Corrosion-resistant Accessories optional l STAINLESS STEEL PDF: CAD: ohs info: x y Part No. A H E1 E2 Base Base f tk ts tg kt Length Length 0.3 ±0.15 ±0.15 lx ly 0.1 SLW-XY-ESJ M8 6.4 Part No. sg d T l1 d1 d1 l2 d2 d2 ha1 ha2 W Standard Optional Standard Optional SLW-XY-ESJ-1040 M6 10 T10x2 17 T10x2 6h9 17 T10x2 6h The hand wheel on the y-axis can be ordered installed on the left or the right side. Order example for left SLW-XY-ESJ-1040-AWM for 200 mm stroke length on the x-axis and 300 mm on the y-axis. Order example for left SLW-XY-ESJ-1040-AWM for 200 mm stroke length on the x-axis and 300 mm on the y-axis

7 HTS Slide Table System Tough and adaptable, HTS is the most flexible system and is available with several shaft and screw combinations, including hard anodized aluminum and stainless steel. All HTS tables are designed to be simple bo-on solutions. HTSC offers a compact(act carriage. l + stroke High temperature version HTS-HTX +356 F (+180ºC) -59 F (-50º C) d T E2 l2 d2 E1 A Standard +194 F (+90 C) -58 F (-50 C) f H Hand wheels optional kt tk ts tg kq s sk sg Part No. Shafting End blocks/carriages Bearings Lead screw HTS Hard Anodized AL* Anodized AL iglide plastic Mild Steel** HTS-HTX Stainless 440C Anodized AL iglide plastic Stainless 304 *Case hardened carbon (1050) & Hardened stainless (440C) optional **Stainless (304SS) optional E3 Al ha Length (mm) and Weight Part No. Maximum Linear Aluminum Shaft Steel Shaft Max. static stroke travel/rev weight add l weight weight add l weight load-bearing capacity length (per 100 mm) (per 100 mm) axial radial (mm) (mm) (kg) (kg) (kg) (kg) (N) (N) HTS-12-AWM HTS-20-AWM HTS-30-AWM Hi Temperature (-59 F F) HTS-12-EWM-HTX** Part No. A AI H E1 E2 E3 I f tk ts ±0.15 ±0.15 ±0.15 ±0.1 HTS-12-AWM HTS-20-AWM HTS-30-AWM Hi Temperature (-59 F F) HTS-12-EWM-HTX** Part No. tg kt s sk sg kq d T l2 d2 ha ±0.1 Standard HTS-12-AWM M M T10 x 2 17 T10 x 2* 18 HTS-20-AWM M M T18 x h9 23 HTS-30-AWM M M T24 x h9 36 Hi Temperature (-59 F F) HTS-12-EWM-HTX** M M T10 x 2 17 T10 x 2* * T10x2 lead screw end unmachined (10 mm OD x 2 mm pitch), optional 6mm available

8 Linear Slide Table HTS-PL Adjustable Clearance and Anti-Backlash Lubricant-free Preloaded trapezoidal lead screw nut, Pretension force 11.2 lbf (50 N) adial clearance is adjustable from both sides Low weight I l + Stroke stroke Part No. Shafting End blocks/carriages Bearings Lead screw HTS Hard Anodized AL* Anodized AL iglide plastic Mild Steel** *Case hardened carbon (1050) & Hardened stainless (440C) optional **Stainless (304SS) optional Preloaded trapezoidal lead screw nut adial clearance adjustable from both sides with adjustment screws PDF: CAD: ohs info: Length (mm) and Weight Part No. Maximum Linear Aluminum shaft Steel shaft Max. static stroke travel/rev weight add l weight weight add l weight load-bearing capacity length (per 100 mm) (per 100 mm) axial radial (mm) (mm) (kg) (kg) (kg) (kg) (N) (N) HTS-12-AWM-PL HTS-20-AWM-PL HTS-30-AWM-PL Part No. A AI H E1 E2 E3 I f tk ts ±0.15 ±0.15 ±0.15 ±0.1 HTS-12-AWM-PL HTS-20-AWM-PL HTS-30-AWM-PL Part No. tg kt s sk sg kq d T l2 d2 ha ±0.1 Standard HTS-12-AWM-PL M M T10x2 17 T10x2* 18 HTS-20-AWM-PL M M T18x h9 23 HTS-30-AWM-PL M M T24x h9 36 * T10x2 lead screw end unmachined, optional 6mm available Lifetime calculation, CAD files online:

9 HTS-BB Slide Table System Higher speeds Higher precision Constant torque l + stroke A f H Hand wheel optional Part No. Shafting End blocks/carriages Bearings Lead screw HTS-BB Hard Anodized AL* Anodized AL iglide plastic Mild Steel** *Case hardened carbon (1050) & Hardened stainless (440C) optional **Stainless (304SS) optional Length (mm) and Weight Part No. Maximum Aluminum Shaft Steel Shaft Max. static stroke weight add l weight weight add l weight load-bearing capacity length (per 100 mm) (per 100 mm) axial radial (mm) (kg) (kg) (kg) (kg) (N) (N) HTS-BB ,400 HTS-BB ,000 4,000 HTS-BB-30 1, ,500 6,000 kt tk ts d tg T Part No. A AI H E1 E2 E3 I f tk ts ±0.15 ±0.15 ±0.15 ±0.1 HTS-BB-12-AWM-Stroke HTS-BB-20-AWM-Stroke HTS-BB-30-AWM-Stroke Part No. tg kt s sk sg kq d T l2 d2 ha ±0.1 Standard HTS-BB-12-AWM-PL M M T10x2 17 T10x2* 18 * HTS-BB-20-AWM-PL M M T18x h9 23 HTS-BB-30-AWM-PL M M T24x h9 36 kq s sk sg E3 Al E2 l2 d2 ha E1

10 Linear Slide Table HTSS Fast Pitch Lead screws High helix pitch lead screw HTSS-12 moves 10x12/10x50 HTSS-20 moves 18x100 High-speed solution Maintenance-free Dry running Hand wheel option l + stroke A f H kt tk ts d T kq tg s sk sg E3 Al E2 l2 d2 ha E1 PDF: CAD: ohs info: Part No. Shafting End blocks/carriages Bearings Lead screw HTSS Hard Anodized AL* Anodized AL iglide plastic Stainless *Case hardened carbon (1050) & Hardened stainless (440C) optional Length (mm) and Weight Part No. Linear Maximum Aluminum shaft Max. static travel/rev stroke length weight add l weight load-bearing capacity (per 100 mm) axial radial (mm) (mm) (kg) (kg) (N) (N) HTSS-12-AWM 12/ /100 1) 600/400 HTSS-20-AWM ) Dependent on screw pitch 10x12 or 10x50 mm Part No. A AI H E1 E2 E3 I f tk ts tg ±0.15 ±0.15 ±0.15 ±0.1 HTSS-12-AWM M8 HTSS-20-AWM M10 Part No. kt s sk sg kq d T l2 d2 ha ±0.1 Standard HTSS-12-AWM M T10x50 17 T10x50* 18 HTSS-20-AWM M T18x h9 23 * T10x50 supplied with lead screw end unmachined, optional 6mm available Available lead screws: 10 mm OD w/ 50 mm pitch 18 mm OD w/100 mm pitch Lifetime calculation, CAD files online:

11 Linear Slide Table - HTS HTS-FF - Fast Forward HTS linear tables with quick release mechanism offer a combination of accurate positioning and quick manual adjustment. Aluminum carriage and end blocks For fast format adjustments Variable stroke length Only recommended for horizontal applications Max. static axial load 200 N (horizontal installation position) Max. dynamic axial load 50 N Hand wheel optional Stroke T10x2 6, M8 T-10x2 6,6 2 6 M6 6, ,5 Part number Max. length of stroke Weight Additional weight (mm) (kg) pro 100 mm HTS-12-AWM-FF Press > disengage > move manually > click into place > fine-tune

12 Linear Slide Table - HTS HTS-PL XY Table f ly + stroke tg l2 f HTS High precision, extreme stiffness and exact alignment, single piece carriage Available as standard and preloaded Hand wheel optional tk lx + stroke l1 ts ha2 d1 HTS-PL kt d2 H L c E2 T d T d sg 90 ha1 E1 PDF: CAD: ohs info: A x y Part No. Shafting End blocks/carriages Bearings Lead screw HTS Hard Anodized AL* Anodized AL iglide plastic Mild Steel** *Case hardened carbon (1050) & Hardened stainless (440C) optional **Stainless (304SS) optional Length (mm) and Weight Part No. Linear A H E1 E2 Basic Basic f tk ts tg kt travel/rev 0.3 ±0.15 ±0.15 length length ±0.1 (mm) (mm) (mm) (mm) (mm) lx (mm) ly (mm) (mm) (mm) (mm) (mm) (mm) (mm) HTS-XY M8 6.4 HTS-XY-12-PL M8 6.4 HTS-XY-20-EWM-PL M Part No. sg d T I1 d1 d1 I2 d2 d2 ha1 ha2 W standard optional standard optional ha2 ha1 (mm) (mm) (mm) (mm) (mm) (mm) HTS-XY-12 M6 12 T10x2 17 T 10x2 6h9 17 T10x2 6h HTS-XY-12-PL M6 12 T10x2 17 T 10x2 6h9 17 T10x2 6h PL = HTS-Preload-version Order example: The rotary knob on the y-axis can be ordered installed on the left or on the right side. Order example for left HTS-XY-12-L for 200 mm stroke length on the x-axis and 300 mm on the y-axis. Order example for left HTS-XY for 200 mm stroke length on the x-axis and 300 mm on the y-axis

13 - HTS HTSC - Compact Carriages Solid flexible design Ideal for 2 carriages Dry running and maintenance-free Hand wheel optional Adjustable radial clearance Part No. Shafting End blocks/carriages Bearings Lead screw HTSC Hard Anodized AL* Anodized AL iglide plastic Mild Steel** *Case hardened carbon (1050) & Hardened stainless (440C) optional **Stainless (304SS) optional Length (mm) and Weight Part No. Maximum Linear Aluminum shaft Steel shaft Max. static stroke travel/rev weight add l weight weight add l weight load-bearing capacity length (per 100 mm) (per 100 mm) axial radial (mm) (mm) (kg) (kg) (kg) (kg) (N) (N) HTSC-12-AWM HTSC-20-AWM HTSC-30-AWM HTSC-40-AWM HTSC-50-AWM Part No. A AI H E1 E2 I f tk ts tg ±0.15 ±0.15 ±0.1 HTSC-12-AWM M8 HTSC-20-AWM M10 HTSC-30-AWM M16 HTSC-40-AWM M16 HTSC-50-AWM M16 Part No. kt sk sg kq d T l2 d2 ha ±0.1 Standard HTSC-12-AWM M T10x2 17 T10x2* 18 HTSC-20-AWM M T18x h9 23 HTSC-30-AWM M T24x h9 36 HTSC-40-AWM M T26x HTSC-50-AWM M T30x * T10x2 supplied with lead screw end unmachined, optional 6mm available 50.26

14 - HTS HTSC-HYD - Hygienic Design Based on the hygienic design idea, this version offers an easily cleaned solution. Even screw connectors are designed easily accessible and the gap dimensions accordingly generous. The materials used are plastic and 300 series stainless steel. STAINLESS STEEL PDF: CAD: ohs info: Part No. A AI H E1 E2 I f ts d T l2 d2 ha ±0.15 ±0.15 ±0.1 HTSC-20-EWM-HYD tr18x h

15 Linear Slide Table - HTS HTSP - Small, Low Cost and Corrosion esistant f HTSP is the most cost-effective and lightweight unit available. ecommended for handling low weight applications by hand or low-speed motor. HTSP works well in corrosive environments. Small version Very low weight Low cost Corrosion resistant Accessories optional (rotary knob, position indicator ) Carriage and end blocks made from high performance polymers Hand wheel optional For hand powered applications only H A Ht d2 kt l2 d E2 E3 Al I + Stroke s T ts tk E1 ha Part No. Shafting End blocks/carriages Bearings Lead screw HTSP Hard Anodized AL* Anodized AL iglide plastic Stainless Steel *Case hardened carbon (1050) & Hardened stainless (440C) optional Lengths (mm) and Weight Linear Maximum Aluminum shaft travel/rev stroke length weight Add l weight (kg) Part No. (mm) (kg) (per 100 mm) HTSP Square carriage with four symmetrical connection bores Part No. A AI H Ht E1 E2 E3 I f tk ts HTSP Part No. s sg d T l2 d2* ha Max. static load-bearing capacity standard axial (N) radial (N) HTSP M8 15 M * Standard versions supplied with lead screw end unmachined Lead screw clamp not available Lifetime calculation, CAD files online:

16 Linear Slide Table - HTS HTSP - Low Cost and Corrosion esistance HTSP is the most cost-effective and lightweight unit available. ecommended for handling low weight applications by hand or low-speed motor. HTSP works well in corrosive environments. Solid plastic version Light weight Cost-effective Corrosion resistant Hand wheel optional D-D Øs sg H A d2 ha d2 l2 D D f Al E2 D D E2 I + Stroke T d T d ts tk E1 PDF: CAD: ohs info: Part No. Shafting End blocks/carriages Bearings Lead screw HTSP Hard Anodized AL* iglide plastic iglide plastic Mild Steel** *Case hardened carbon (1050) & Hardened stainless (440C) optional **Stainless (304SS) optional Length (mm) and Weight Linear Maximum Aluminum shaft travel/rev stroke length weight Add l weight (kg) Part No. (mm) (kg) (per 100 mm) HTSP Liners and T nuts made from iglide J HTSP Bearing and nut integrated into carriage Part No. A AI H E1 E2 E3 I f tk ts HTSP HTSP Part No. s sg d T l2 d2* ha Max. static load-bearing capacity standard axial radial (N) (N) HTSP M6 12 T10x2 17 T10x HTSP M6 12 T10x2 17 T10x * Standard versions supplied with lead screw end unmachined, optional 6mm available Lifetime calculation, CAD files online:

17 Linear Slide Table - HTS HTSP-FF - Fast Forward HTSP linear tables with quick release mechanism offer a combination of accurate positioning and quick manual adjustment. Light solid polymer carriages and end blocks For fast format adjustments Including self-locking brake Variable stroke length Only recommended for horizontal applications Max. static axial load 200 N Max. dynamic axial load 50 N Hand wheel optional T 10 x T 10 x 2 ø 12 42,5 55 M ø 6, Stroke Part number Max. length of stroke Weight Additional weight (mm) (kg) pro 100 mm HTSP AWM-FF* *Liners and trapezoidal lead screw nut made of iglide J Press > disengage > move manually > click into place > fine-tune 42 85