E2/
|
|
- Matthew Greene
- 6 years ago
- Views:
Transcription
1 1400 E2/ Price index IPA Qualification Certificate Air Cleanless Class ISO Class 3 (at v = 2 m/s) upon request ESD classification: Electrically conductive ESD/ATEX version upon request UL94 V2 classifications upon request Opening system for rapid opening, either from the right or the left Double stop dog for long unsupported length Cross bars with high locking range Series 1400 snap-open on both sides along inner radius Series snap-open on both sides along outer radius Series half E-Tube snap-open on both sides along inner radius Series fully enclosed E-Tube snap-open on both sides along inner radius Tried-and-tested mounting bracket Modular interior separation Easy assembly by optimized pin Integrated strain relief possible Also available as ESD version Snap-open mechanism, choice of snap-open on left or right. Hinged crossbar can be swiveled by more than 0 on both sides. Lightning-fast closing by hand. Secure fit without additional locking devices. When to use the Series 1400///: If snap-open accessibility along inner or outer radius is required If integrated strain relief is required at the connection point If half E-Tube is required (Series ) If fully enclosed E-Tube is required (Series ) If long service life is required If easy installation is required Standard product with many accessories When not to use it: If the application is very simple Easy Chain, Series E14, page 3.32 Order example complete E-Chain Please indicate chain-lenghts or number of links Example: 3 m or 90 links 3 m E-Chain with 2 separators assembled every 2 nd link Interior separation 1 set PZB Mounting bracket 5.92 Available from stock. Delivery in 24h or today! (Delivery time means time until shipping of goods)
2 E2/000 Series 1400 Dimensions and Technical Data Unsupported length FL G = with straight upper run FL B = with permitted sag Further information Design, page 1.12 HF D H S (FL G ) S (FL B ) 32 FL G FL B S/2 S Moving end Fixed end FL G Unsupported length FL G / FL B [m] Length of travel S [m] Pitch = 33,3 mm/link Links/m = 30 (1000 mm) Chain length = S / 2 + K 035* 038* 048* H D K H D K *for Series / upon request Fill weight [kg/m] 37.5 FL B H - H HF = H + 25 S = Length of travel = Bending radius H = Nominal clearence height H F = equired clearence height H I = Trough inner height D = Overlength E-Chain radius in final position K = π + "safety" D 2 = Over length - long travels, gliding K 2 = *Further add-on H 2 = *Mounting height *if the mounting bracket location is set lower Other installation methods Vertical, hanging 20 m Vertical, standing 2 m Side mounted, unsupp. 0,7 m otary requires further calculation Unsupported length of upper run = upon request Short travels - unsupported Unsupported E-Chains feature positive camber over short travels. This must be accounted for when specifying the clearance height H F. Please consult igus if space is particularly restricted. The required clearance height: H F = H + 25 mm (with 0,5 kg/m fill weight) E2/000 medium Inner height: 21 mm Long travel lengths from 10 m to max. 75 m Chain length = S / 2 + K 2 S S/2 S/2 Moving end Fixed end H2 D2 K2 Guide trough with glide bar Guide trough without glide bar Total length of guide trough In case of travels between 4 and 10 m we recommend a longer unsupported length. HI Gliding, long travel applications (max. 75 m) In this case the E-Chain upper run will be introduced in a guide trough on the lower run. We recommend to realize the engineering of such a plant by our technicians. Speed / acceleration FL G max. 20 [m/s] / max. 200 [m/s 2 ] Speed / acceleration FL B max. 3 [m/s] / max. 6 [m/s 2 ] Gliding speed / acceleration (maximum) max. 10 [m/s] / max. 50 [m/s 2 ] Material - permitted temperature C igumid G / -40 up to +120 C Flammability class, igumid G VDE 0304 IIC UL94 HB Technical Data C Details of material properties page 1.38 page
3 1400 E2/000 E-Chains Series 1400 Product ange igus E-ChainSystems max. 21 Series E-Chain - snap-open along inner radius [mm] [mm] [mm] Bending radii Weight [kg/m] , , , , , , , , , , , , , , , , , ,83 igus GmbH Cologne structure max. structure Color black Bending radius Width Series 21 Color black Bending radius Width Series Supplement with required radius. Example: = standard color, other colors page 1.39 Pitch = 33,3 mm/link - Links/m = 30 Please note: For using this series for long travels (gliding), please consult with igus first. For long travels, igus specifies E-Chains that snap open on the outer radius. [mm] [mm] [mm] Bending radii Weight [kg/m] , , , , , , , , , , , , , , , , , ,83 Internet: info@igus.de Series - E-Chain - snap-open along outer radius - Standard! Supplement with required radius. Example: = standard color, other colors page 1.39 Pitch = 33,3 mm/link - Links/m =
4 E2/000 E-Tubes Series Product ange Series - half E-Tube - snap-open along inner radius [mm] [mm] [mm] Bending radii Weight [kg/m] , , , , , , , , , , , , , , , ,03 max. 21 E2/000 medium Inner height: 21 mm The bending radii are available upon request. Supplement with required radius. Example: = standard color, other colors page 1.39 Pitch = 33,3 mm/link - Links/m = 30 Please note: For using this series for long travels (gliding), please consult with igus first. For long travels, igus specifies E-Chains that snap open on the outer radius. Series - E-Tube - snap-open along inner radius [mm] [mm] [mm] Bending radii Weight [kg/m] , , , , , , , , , , , , , , , ,08 structure max. Color black Bending radius Width Series 21 The bending radii are available upon request. Supplement with required radius. Example: = standard color, other colors page 1.39 Pitch = 33,3 mm/link - Links/m = 30 Please note: For using this series for long travels (gliding), please consult with igus first. For long travels, igus specifies E-Chains that snap open on the outer radius. structure Color black Bending radius Width Series page
5 1400 igus E-ChainSystems 1,5 Vert. Separator, slotted 5 unassembled assembled E2/000 Series 1400 Accessories Interior Separation Option 1: Vertical Separators for E-Chains Series 1400 Vertical Separators are used if a vertical subdivision of the E-Chain interior is required - By standard Vertical Separators are assembled every other E-Chain link Standard subdivision with Vertical Separator, slotted 14011, for combinations with Full-Width Shelf 111.X ,5 Vert. Separator, slotted 5 unassembled 1 assembled Option 2: Vertical Separators for E-Tubes Series Vertical Separators are used if a vertical subdivision of the half E-Tube (Series ) and the fully enclosed E-Tube (Series ) interior is required - By standard Vertical Separators are assembled every other E-Chain link Standard subdivision with Vertical Separator, slotted 14511, for combinations with Full-Width Shelf 111.X igus GmbH Option 3: Full-Width Shelves for E-Chains Series 1400 and E-Tubes Series For applications involving many cables with similar or identical diameters Full-Width Shelf 111.X can be combined with Vertical Separator, slotted (E-Chain ) and Vertical Separator, slotted (E-Tube/half E-Tube) 5,75 2 5,75 4, Cologne X Width Width X [mm] unassembled assembled X [mm] unassembled assembled Internet: info@igus.de Full-Width Shelf X t =
6 Series 1400 Accessories Mounting Brackets 1400 The Standard - one-piece mounting brackets - pivoting ecommended for unsupported and gliding applications Well suited for tight installation conditions Integrated multed strain relief Easy to assembly Various mounting positions Moving end with bore (outer link) PZ A1 A2 A3 A PZ Fixed end Possible installation conditions for assembled mounting with pin (inner link) brackets Order example "preassembled" below One-piece mounting brackets - locking ecommended for unsupported and gliding applications Furthermore: At very high speed and/or acceleration If space is limited for height (the H F measurement) Various mounting positions Moving end with bore (outer link) PZ PZ Fixed end with pin (inner link) A1 A2 A3 A4 Possible installation conditions for assembled mounting brackets Order example "preassembled" below PZ Standard! (pivoting) PZ (locking) Moving end 53, Standard! (pivoting) PZ (locking) PZ 53,5 Fixed end 14 13,5 Dimensions and order configurations Strain relief is possible on the moving end and/or the fixed end. structure (pivoting) , ,5 13,5 A ø 11,8/90 ø 6,4 B For Dim.A Dim.B Number E-Chain : full set with [mm] [mm] of teeth tiewrap plate PZ, PZ 33, PZ 13 38, PZ 24 51, PZ 36 63, PZ 54 81, PZ 66 93, PZ , PZ ,5 13 Please add the with the requested index - 34 for the pivoting configuration e.g PZ or 12 for the locking configuration e.g PZ For the preassembled mode please add the index A1... A4 e.g PZ A1 B PZ A1 structure (locking) PZ A1 A must be indicated on preassembled configurations With assembled strain relief tiewrap plates Full set pivoting = 34 Mounting brackets for selected chain type Full set, for both ends: PZ +tiewrap plate Single-part order: PZ +tiewrap plate Mounting bracket with bore PZ +tiewrap plate Mounting bracket with pin A must be indicated on preassembled configurations With assembled strain relief tiewrap plates Full set pivoting= 12 Mounting brackets for selected chain type Full set, for both ends: PZ +tiewrap plate Single-part order: PZ +tiewrap plate Mounting bracket with bore PZ +tiewrap plate Mounting bracket with pin page
7 1400 Series 1400 Accessories Mounting Brackets, Polymer A1 A2 A3 A4 Possible installation conditions for assembled mounting brackets Order example "preassembled" below Mounting bracket - polymer ecommended for unsupported and gliding applications Well suited for tight installation conditions Strain relief with detachable tiewrap plates Variable traverse angle for flexible assembly The twistability of the E-Chain and the option to assemble the mounting brackets on the fixed end and/or the moving end, enable various installation options Moving end with bore (outer link) 0...3PZ(B) depending on radius 0...4PZ(B) Fixed end with pin (inner link) igus GmbH Cologne Dimensions and order configurations A B ø 6, ø 5, PZB PZ PZB PZ PZB PZ PZB PZ PZB PZ PZB PZ PZB* PZ For the preassembled mode please add the index A1... A4 e.g PZB A1 *Tie wrap plate (consists of 2 x 2050.ZB) does not snap on but needs to be bolted down separately ø 5,5 ø 6,2 B A Internet: info@igus.de Strain relief is possible on the moving end and/or the fixed end. structure PZB A1 A must be indicated on preassembled configurations With assembled strain relief tiewrap plates Full set pivoting = 34 Width Mounting brackets for selected chain type Full set, for both ends: PZB +tiewrap plate Single-part order: PZB +tiewrap plate Mounting bracket with bore PZB +tiewrap plate Mounting bracket with pin 0...3PZ(B) Moving end 0...4PZ(B) Fixed end For Dim. A Dim. B E-Chain full set with full set without [mm] [mm] tiewrap plate tiewrap plate
8 Series 1400 Accessories Mounting Brackets, Steel 1400 Steel mounting bracket - locking Locked connections One part for all chain widths Electrically conductive Bolted connection outside of chain cross-section possible Moving end with bore (outer link) Fixed end with pin (inner link) Possible installation conditions - Further installation angles installation sketch * Dimensions and order configurations B = +24 ø 4,5 ø 4, C = +27 A = - 7 ø 4,5 37 ø 4, For Dim. A Dim. B Dim. C E-Chain full set [mm] [mm] [mm] A = - 7 *pivoting with no stop, (360 ). Screw-on area of the mounting brackets can be on the interior or exterior Full set, 4 parts 2 with pin / 2 with bore Single-part order: Mounting bracket with bore, 1 part left / right Mounting bracket with pin, 1 part left / right page
9 igus E-ChainSystems Single tiewrap plate 25 Shown assembled E2/000 Series 1400 Accessories Strain elief 6.2 Tiewrap plate as individual part As individual component screwed on KMA. Can be plugged in the mounting brackets. Details chapter 10 C B 2 8 (n-1) x 10 12/ Tiewrap No. of Dim. C Dim. B plate teeth n [mm] [mm] 2020.ZB ZB ZB ZB ZB ZB = (2030.ZB ZB) ZB ZB = (2050.ZB ZB) Cable tiewraps as individual part Cable tiewraps (100-piece bag) Width x length max. Ø Tensile strength CFB.001 4,8 x 150 mm 36 mm 222 N Strain relief for steel mounting brackets Clip-on connection is not possible with steel mounting brackets. In this case, the tiewrap plates must be bolted directly into separate bore holes in front of the mounting bracket. Alternatively the tiewrap plates 20XX.ZB can be also used here. Details chapter 10 igus GmbH Cologne Other strain relief elements - optional chapter 10 Internet: info@igus.de igus chainflex CF
10 SL SL Trough height: 77 mm Aluminum "SuperTrough" sic Version Bottom clamp attached optionally inwards or outwards M6 x16 B a B i ha 12 4,7 Length of the C-profile according to dimension B i 22 see table Components, trough "sic": Trough side parts, aluminum, 2 m Glide bar, plastic, 2 m Glide strips, plastic, 2 m (without glide strips on request) Components, installation set "sic": Bottom clamp, aluminum C-profile, steel galvanized Screw M6 x16 Sliding nut M6 Interface connector, plastic Order example: Length of travel 30 m - Center mounted for Series with B i = 68 Guide trough set (set of 2 trough side parts, incl. glide strips) without glide bar Order text: 16 m guide trough without glide bar (8 x 2 m sections) Guide trough set (set of 2 trough side parts, incl. glide strips) with glide bar Order text: 16 m guide trough with glide bar (8 x 2 m sections) Installation set "sic" complete (guide trough-sets + 1) Order text: 17 installation sets "sic" Module for the fixed end Order text: 1 set Option: For an additional noise dampening with silencer profile, please add Index A - Example: H i 2 x ha H a = SL SL SLA ha =Outer width E-Chains / E-Tube =Inner width E-Chains / E-Tube =Outer height E-Chains / E-Tube H i =Inner trough height H a =Outer trough height B i =Inner trough width depends on dim. B a =Outer trough width n Mon =Number of installation sets (left/right) n i =Number of trough sets (left/right)! H i 2 ha B i + 4 = Guide trough set = Glide bar = Installation set "sic" = C-profile Installation set "sic" with C-profile Bottom Clamp attached optionally inwards or outwards Order example B i attached attached [mm] inwards outwards n Mon = n i + 1 n i x 2000 mm Principle sketch: Number of installation sets to be installed = Number of trough sections + 1 A quick fix for mounting the stationary end of an E-Chain With this module for the fixed end, fast and easy mounting onto the Aluminum "SuperTrough" is now possible without any drilling. Fast mounting of the E-Chain by clamping onto the aluminum trough Quick relocation of the stationary end No drilling necessary chapter 10 chapter 9 page 5.91 Details about Alu "SuperTrough" and further guidance possibilities chapter 9, guide troughs 5.101
E2/000 Series
E2/000 Series 35 35 Price index IPA Qualification Certificate Air Cleanless Class ISO Class 3 (at v = 2 m/s) upon request ESD classification: Electrically conductive ESD/ATEX version upon request UL94
More informationeasy chain Series E26 Z26
easy chain Series 36,5 36,5 Price index IPA Qualification Certificate: Air Cleanless Class ISO Class 2 (at v = 1 m/s) upon request UL94-V2 classifications Torsional motion possible Special equipment: Electrically
More informationeasy chain Series E200 Z200
easy chain Series Price index IPA Qualification Certificate: Air Cleanless Class ISO Class 2 (at v = 1 m/s) upon request UL94-V2 classifications Torsional motion possible Special equipment: Electrically
More informationE2 mini Series 10 Introduction
E2 mini Series Introduction 18 Stable and cost-effective Mounting bracket with strain relief option One-piece design, non snap-open Lightweight and stable Large pin for high stability When to use the Series
More informationE2 e-tubes. Protection against dirt and debris 6.0
E2 e-tubes Protection against dirt and debris 6.0 6.1 E2 e-tubes - protection in environments with dirt and debris E2 Series R100 and Series R Since igus introduced the first openable e-tubes in the mid-1980`s,
More information07) D-US SYSTEM E4 204S :57 Uhr Seite
7.0 E4 7.1 System E4 4-piece E-Chains Modular and robust E4/00 Standard System E4/00 Your first choice in E4 - The standard broad application spectrum Low noise - Noise reduction with TÜV certificate (Series
More informationE2 mini Series 14 Introduction
E2 mini Series Introduction 20 Mounting bracket with strain relief option Snap-open along inner radius When to use the Series E2 mini: If an e-chain with an inner height of 20 mm and small bending radii
More informationSeries 17 Introduction
zipper e-chains Series Introduction 3 Mounting bracket with strain relief option e-chain zip-open along outer radius Fast opening, large inner height When to use Series E mini: If an e-chain with an inner
More informationSeries 09 Introduction
09 zipper e-chains Series 09 Introduction Mounting bracket with strain relief option e-chain zip-open along outer radius Lightweight and stable For high accelerations Small pitch for low-noise, smooth
More informationEnergy Chain System E2 Medium Series 200/240/250
Energy Chain System E2 Medium //.98.98.98 Price Index Features & Benefits Dirt-repellent contoured exterior // Cable-friendly, smooth interior with modular interior separation Special Features / Options
More informationUniversal applications for igus Energy Chains
140 Energy Chains are the umbilical cord of modern machines. igus has been developing, producing and testing polymer Energy Chains since 1971. Our expert knowledge is being refined continuously with the
More informationQuick, zipper-like installation
07 Product Range: Series 07 "Zipper" 10,3 igus Energy Chain Systems Price Index 8 Widths 3 Bending Radii Product Range: Inner Widths (Bi) in mm: 6, 10, 16, 20, 30, 40, 50, 64 Bending Radii (R) in mm: 018,
More informationE6 Series E6.52 R6.52 Delivery program Extremely low-noise, minimum vibration, medium size
E6 Series Delivery program Extremely low-noise, minimum vibration, medium size... crossbars every 2 nd link... fully enclosed e-chains Series crossbars every 2 nd link (crossbars removable along both radii)
More information02A)-D-EU-IT-TRIFLEX SOLO- G :25 Uhr Seite 30 for 3D-applications easy triflex 2.30
for 3D-applications easy triflex 2.30 2.31 easy triflex - e-chain for 3D-applications The triflex Series was developed to realize safe energy supply in the case of multi-dimensional movements. In doing
More informationE2 Medium - E-Chains with 2-part link design for a wide range of applications
igus E2 Medium E2 Medium - E-Chains with 2-part link design for a wide range of applications E2 Medium - the standard The E2 Medium Series is the largest of the E2 family of E-Chains features snap-open
More informationE4.1 Series E4.56 Introduction
E.1 Series Introduction 56 56 All-sides attachment Optional with noise dampening pads 60 db(a) Stable due to undercut design, large inner height When to use Series : If a robust e-chain /e-tube with an
More informationigus System E6 extremely low-noise, minimum vibration and abrasion, cleanroom suitable
igus System E6 extremely low-noise, minimum vibration and abrasion, cleanroom suitable 916 917 Extremely low-noise, minimum vibration and abrasion, clean room suitable - System E6 The E6 Series offers
More informationEnergy Chain system E4-1 Series E4-56/H4-56/R4-56
Energy Chain system E4-1 // Clean- oom Price Index Special Options Available Assembly Tips Low noise version available with special rubber pads Cleanroom test upon request ESD classification: Electrically
More informationEnergy Chain Systems E2 medium
Energy Chain Systems E2 medium E2 medium Series // Series 26/27/27i Series 340/350* *Extender chain 2 parts per link, maximum Easy installation Many connection options Long service life High stability
More informationLight, highly flexible and low-vibration
T3 Light, highly flexible and low-vibration Advantages of the T3 system: Very low weight e-chain For high speeds and accelerations Virtually no polygon effect Small bend radii and installation space Fast,
More information02)-D-EU-TWISTER-KOMPLETT- G :04 Uhr Seite
2.56 New generation: robust, low-noise, for high loads twisterchain new 2.57 NEW in this catalog New generation - twisterchain new: robust, low-noise, for high loads Higher loads and smoother running igus
More informationigus e-chainsystems universal and modular
igus e-chainsystems universal and modular 6 7 Introduction dvantages election table Universal: mounting bracket with strain relief option ave time: simply press cables in without opening and closing crossbars
More informationE2 micro Selection Table. E2 micro Introduction Advantages. E2 micro - one-piece e-chains One-piece, non snap-open
E micro Introduction dvantages E micro election Table Universal: Mounting bracket with strain relief option, quickflange optionally table: Large, assembly-friendly pins for long unsupported lengths Cable
More information.e.chain ../ / ystems. ...e.chains /readychain.complete system/
.e.chain../ / /. ystems....e.chains /readychain.complete system/ Overview E-Chains... 26 8 46 48 4 6 31 27 5 29 29 14 41 13 3 15 42 3 34 23 36 40 16 38 30 12 18 11 37 32 7 45 33 47 22 21 19 44 25 35 9
More informationigus TwisterChain NEW Second Generation: robust, low-noise, for high loads
igus TwisterChain NEW Second Generation: robust, low-noise, for high loads TwisterChain New robust, low-noise, for high loads Higher loads and smoother running igus new generation of TwisterChain circular
More informationeasy chain zipper system E2 E2 e-tubes system E4 igus e-chainsystems clean room universal and modular
universal and modular systems e-chainsystems igus 16 17 clean room system E4 E e-tubes system E zipper easy chain easy chain Introduction dvantages easy chain election Table Universal: Mounting bracket
More informationguide trough systems aluminum, steel and other troughs
guide trough systems aluminum, steel and other troughs 1176 1177 Guide Troughs Aluminum Guide Troughs Steel sic-version: Fast assembly Heavy-Version: plant manufacturing: www.igus.eu/eu/salun Aluminum
More informationguide trough systems aluminium SuperTrough steel guide trough support tray guidefast guidelite tubular trough snap-in trough
guide trough systems aluminium SuperTrough steel guide trough support tray guidefast guidelite tubular trough snap-in trough 682 683 Guide troughs Aluminium Steel Guide troughs Further trough systems The
More informationKP35 series VARIABLE INNER DISTRIBUTION QUICK AND EASY TO OPEN ROBUST ALL-ROUNDER
KP35 series VARIABLE INNER DISTRIBUTION QUICK AND EASY TO OPEN ROBUST ALL-ROUNDER Robust all-rounder with variable inner distribution 2 height mm widths 50 mm Pitch 35 mm Additional load up to 2 kg/m Travel
More informationtriflex R Series TRE Easy to fill
10-43,3 triflex R Series Easy to fill - "Easy" Design - simply press cables in High tensile strength thanks to special ball-and-socket principle Able to move multi-dimensionally - Twist up to approx. ±
More information02A)-D-EU-IT-TRIFLEX SOLO- G :24 Uhr Seite 4 R -robotic e-chains 3D triflex 2.4
3D-robotic e-chains triflex R 2.4 2.5 triflex R - 3-dimensional e-chains for robots triflex R (R for "round") is the third generation of multi-axis e-chains. Design features include: Optional fibre rod
More information9.96. guidelok horizontal
9.96 guidelok horizontal guidelok horizontal Upper run guide for long travels, self-supporting Upper run guide for long travels, self-supporting in chip areas Especially for long travels on machine tools,
More informationUNIFLEX Advanced Specifications are subject to change without notice. KSA-0810-GC
24 24.18 A member of the TSUBAKI GROUP nylon open style standard widths Light, quiet all-rounder with wide range of applications* Cost-effective cable carrier Weight-optimized chain geometry Particularly
More informationSelection BASIC LINE BASIC LINEPLUS
PLUS 108 0115 Extremely quick cable laying thanks to flexible lamella crossbars 0115 PLUS Very fast cable laying by simply pressing in Very high utilization factor due to flexible crossbars swivelling
More informationNIFLEX Advanced series PLASTIC CABLE CARRIERS UNIVERSAL AND WITH MANY VARIANTS WITH BALL JOINT
NIFLEX series PLASTIC CABLE CARRIERS UNIVERSAL AND WITH MANY VARIANTS WITH BALL JOINT series Light, quiet all-rounder with a wide range of applications* 2 * Some features can be different for certain types
More informationMONO series. Cable carriers for standard applications. Subject to change.
Cable carriers for standard applications 104 Trademarks are legally protected for the TSUBAKI KABELSCHLEPP GmbH as a national or international registration in the following countries: Trademarks Overview
More informationCABLE DRAG CHAIN SYSTEMS MP 36 G
CABLE DRAG CHAIN SYSTEMS MP 36 G murrplastik Systemtechnik GmbH Postfach 1143 D-71567 Oppenweiler Tel. +49 (0) 7191/482-0 Fax +49 (0) 7191/482-280 www.murrplastik.de info@murrplastik.de 259 Order variants
More informationMultiLine MP 44. System overview. 1 Chain bracket. 2 Shelving system. Chain bracket angle. Separator TR. Chain bracket U-part
MultiLine MP 44 System overview 1 Chain bracket 2 Shelving system Chain bracket angle Separator TR Chain bracket U-part 2 1 122 Guide channels Technical data Aluminium VAW Stainless steel VAW-E Loading
More informationMONO series. Cable carriers for standard applications. Subject to change.
MONO Cable carriers for standard applications 70 Trademarks are legally protected for the TSUBAKI KABELSCHLEPP GmbH as a national or international registration in the following countries: Trademarks MONO
More informationCable drag chain systems MP 32
Cable drag chain systems MP 32 1 MP 32 OPEN PLASTIC OR ALUMINIUM VERSION FLEXIBLE CHAIN BRACKET BROAD INTERIOR LAYOUT TECHNICAL DATA Loading side Inside and outside bend MP CLASSIC Available radii 80.0
More informationXLT series. Tubes with variable cable carrier widths. Subject to change.
Tubes with variable cable carrier widths Trademarks are legally protected for the TSUBAKI KABELSCHLEPP GmbH as a national or international registration in the following countries: tsubaki-kabelschlepp.com/trademarks
More informationXL series. Cable carrier with large inside height. Subject to change.
XL series Cable carrier with large inside height Trademarks are legally protected for the TSUBAKI KABELSCHLEPP GmbH as a national or international registration in the following countries: tsubaki-kabelschlepp.com/trademarks
More informationEnergy Chain Systems Triflex R Energy Tubes
Energy Chain Systems Triflex R Energy Tubes Multi-Dimensional Movement Energy Chains For Robotic Applications Triflex R Triflex R Series A modular, multi-axis, energy-supply protection system Triflex R:
More informationMultiLine MP 35. System overview. 1 Chain bracket. 2 Shelving system. Chain bracket angle. Separator TR. Chain bracket U-part. H-shaped shelf unit RE
System overview 1 Chain bracket 2 Shelving system Chain bracket angle Separator TR Chain bracket U-part H-shaped shelf unit RE 2 1 96 Guide channels Technical data Aluminium VAW Stainless steel VAW-E Loading
More informationData sheet chainflex CFSOFT1
to 5 x d Highly flexible, soft design PVC outer jacket Oil-resistant Flame retardant 1. Outer jacket: Pressure extruded, oil-resistant PVC mixture 2. Core insulation: Mechanically high-quality TPE mixture
More informationCABLE DRAG CHAIN SYSTEMS
CABLE DRAG CHAIN SYSTEMS MP 15 murrplastik Systemtechnik GmbH Postfach 1143 D-71567 Oppenweiler Tel. +49 (0) 7191/482-0 Fax +49 (0) 7191/482-280 www.murrplastik.de info@murrplastik.de 61 Order variants
More informationQUICKTRAX Specifications are subject to change without notice. KSA-0810-GC
24 24.02 A member of the TSUBAKI GROUP light weight cost-effective standard widths QuickTrax Compact and cost-effective cable carriers in two-component technology Extremely fast and easy cable laying installation
More informationSpecifications are subject to change without notice. KSA-L15015-GC-A
Specifications are subject to change without notice A member of the TSUBAKI GROUP nylon open style standard widths Light, quiet all-rounder with wide range of applications* Cost-effective cable carrier
More informationCABLE DRAG CHAIN SYSTEMS
CABLE DRAG CHAIN SYSTEMS MP 41.2 murrplastik Systemtechnik GmbH Postfach 1143 D-71567 Oppenweiler Tel. +49 (0) 7191/482-0 Fax +49 (0) 7191/482-280 www.murrplastik.de info@murrplastik.de 153 Order variants
More informationMultiLine MP 36G. System overview. 1 Chain bracket. 2 Shelving system. Chain bracket U-part. Separator TR. End brackets flange
MultiLine MP 36G System overview 1 Chain bracket 2 Shelving system Chain bracket U-part Separator TR End brackets flange 2 1 106 Guide channels Technical data Aluminium VAW Stainless steel VAW-E Loading
More informationCaring for cables. Types of installation
Caring for cables Cable carriers guide and protect cables and hoses on moving machinery, and prevent tangling or damage from debris or contact with the machine itself. Proper use of a cable carrier extends
More informationSelection BASIC LINE BASIC LINE PLUS VARIO LINE
PLUS 152 Multivariable cable carrier with extensive accessories and stay variants* TÜV design approved in accordance with 2PfG 1036/10.97** Universal connectors (UMB) 87 PLUS Aluminum stays with ball joint
More informationSelection BASIC LINE BASIC LINE PLUS VARIO LINE
PLUS 182 Cable carrier with large inside PLUS Large dimensions Low intrinsic weight TÜV design approved in accordance with 2PfG 1036/10.97 Stable end connector made of steel Can be quickly opened on the
More informationCable drag chain systems MP 25G
Cable drag chain systems MP 25G 1 MP 25G CLOSED MULTILINE CLOSED VARIANTS, STARTING WITH R60 COMPACT DESIGN TECHNICAL DATA Loading side Outside bend Available radii 60.0 250.0 Available interior widths
More informationCable drag chain systems MP 3000
Cable drag chain systems MP 3000 1 MULTILINE MP 3000 OPEN LOW-COST VARIANT CHAIN BRACKET WITH INTEGRATED STRAIN RELIEF TECHNICAL DATA Loading side Inside bend Available radii 50.0 300.0 Available interior
More informationCable drag chain systems MP 35
Cable drag chain systems MP 35 1 MULTILINE MP 35 OPEN METAL CHAIN BRACKET LOW-COST VARIANT TECHNICAL DATA Loading side Inside bend Available radii 70.0 300.0 Available interior widths With plastic frame
More informationThe Separator arrangements depend on the application (see order example or separator options).
SLE Energy chains individual solutions large dimensions simple handling The order for a steel chain SLE should contain the following data: Type / Radius x Length / Width - Connector Arrangement ; Separator
More informationSelection BASIC LINE BASIC LINE PLUS VARIO LINE SERIES TUBE LINE STEEL LINE
PLUS 250 Extremely robust and stable steel chains* PLUS Extremely robust and stable steel chains for heavy mechanical loads and harsh environmental conditions Very long unsupported lengths also for large
More informationSelection BASIC LINE BASIC LINE PLUS VARIO LINE SERIES TUBE LINE
PLUS 332 - Steel cable carriers solutions for extreme applications PLUS Robust design for heavy mechanical loads High additional loads and long unsupported lengths possible Best suited for extreme and
More informationTKA55 IP54. TKA SERIES Chip-Tight Tube Series. tested & attested RATED.
TKA55 IP54 tested & attested RATED TKA SERIES Chip-Tight Tube Series www.ustsubaki.com TKA TUBE SERIES 1 2 5 8 9 11 2 Features Excellent cable protection, even at the brackets Chips and dirt-resistant
More informationData sheet chainflex CF140.UL
1. Outer jacket: Pressure extruded PVC mixture 2. Overall shield: Bending-resistant braiding made of tinned copper wires 3. Inner jacket: Pressure extruded, gusset-filling PVC mixture 4. CFRIP: Tear strip
More informationData sheet chainflex CF130.UL
1. Outer jacket: Pressure extruded, gusset-filling PVC mixture 2. CFRIP: Tear strip for faster cable stripping 3. Core insulation: Mechanically high-quality TPE mixture 4. Conductor: Fine-wire strand consisting
More informationData sheet chainflex CF6
1. Outer jacket: Pressure extruded, oil-resistant PVC mixture 2. Overall shield: Extremely bending-stable braid made of tinned copper wires 3. Inner jacket: Pressure extruded, gusset-filling PVC mixture
More informationData sheet chainflex CF5
1. Outer jacket: Pressure extruded, gusset-filling, oilresistant PVC mixture 2. Core insulation: Mechanically high-quality TPE or PVC mixture 3. CFRIP: Tear strip for faster cable stripping 4. Conductor:
More informationData sheet chainflex CF240
1. Outer jacket: Pressure extruded, oil-resistant PVC mixture 2. Overall shield: Aluminum/Polyester tape and extremely bending-resistant braiding made of tinned copper wires. 3. Banding: Plastic foil 4.
More informationData sheet chainflex CF10
1. Outer jacket: Pressure extruded, halogen-free TPE mixture 2. Overall shield: Extremely bending-resistant braiding made of tinned copper wires 3. Inner jacket: Pressure extruded, gusset-filling TPE mixture
More informationCable drag chain systems MP 41.2, MP 41.3
Cable drag chain systems MP 41.2, MP 41.3 1 POWERLINE MP 41.2 OPEN MP 41.3 CLOSED SLIDING BLOCKS FOR LONGER SERVICE LIFE BROAD INTERIOR LAYOUT FLEXIBLE CHAIN BRACKET PLASTIC OR ALUMINIUM VERSION TECHNICAL
More informationSpecifications are subject to change without notice. KSA-L15015-GC
A member of the TSUBAKI GROUP nylon open style standard widths EasyTrax Extremely quick cable installation, extra-stable thanks to two-component technology Very fast cable installation by simply pressing
More informationCable drag chain systems
able drag chain systems MP 45.1, MP 45.2 New chain series 45 interior height With additional noise reduction 1 System overview MultiLine MP 45.1 MP 45.2 open 1 hain bracket 2 Strain relief hain bracket
More informationigubal Pressfit Spherical Bearings Easy to fit Extremely cost-effective Chemical-resistant Light weight High strength
igubal Pressfit Spherical earings Easy to fit Extremely cost-effective Chemical-resistant Light weight High strength 629 igubal Pressfit Spherical earings The use of pivoting s is usually associated with
More information14 HH EAC/CTP CE RoHS-II conform
Outer jacket: Pressure extruded PUR mixture Inner jacket: Pressure extruded, gusset filling PUR mixture 12 cores or more: Bundles with optimized pitch length and pitch direction Conductor: Fine-wire strand
More informationSpecifications are subject to change without notice. KSA-L15015-GC
A member of the TSUBAKI GROUP nylon tube style standard widths UNIFLEX Proven cable carrier with many opening cross-bar and cover variants* Cost-effective cable carrier Particularly high torsional rigidity
More informationPLE PLE CHARACTERISTICS. Travel. Travel speed. Acceleration. Temperature. Special versions APPLICATION AREAS. PLE max.
PLE load / (kg/m) inner height / (mm) 66 24 20 16 12 8 4 118 115 80 50 30 16 7 0 0 7 PL E 220 PL E 3 2 0 PLE 520 closed + open PL E 620 2 4 6 8 free carrying length Lf / (m) PLE max. 6 m free carrying
More informationData sheet chainflex CF9
1. Outer jacket: Pressure extruded, gusset-filling, halogenfree TPE mixture 2. CFRIP: Tear strip for faster cable stripping 3. Core insulation: Mechanically high-quality TPE mixture 4. Conductor: Stranded
More informationData sheet chainflex CF210.UL
For detailed overview please see design table 1. Outer jacket: Pressure extruded, oil-resistant PVC mixture 2. Overall shield: Bending-resistant braiding made of tinned copper wires. 3. Banding: Plastic
More informationVARITRAK LS/LSX SIMPLE Stroke system is integrated in the chain link plate no additional bolts are needed
RELIABLE Optional central bolts for applications with high loads* SIMPLE Stroke is integrated in the chain link plate no additional bolts are needed FLEXIBLE Various cable separation options LIGHT Weight-optimized
More informationPLE PLE CHARACTERISTICS. Travel. Travel speed. Acceleration. Temperature. Special versions APPLICATION AREAS. PLE max.
PLE PLE PLE applications 67 PLE dimensions 68 PLE types 69 PLE sizes 71 PLE parts 72 PLE assembly 73 PLE part numbers 76 PLE CHARACTERISTICS The PLE with aluminum stays is available as PLE with plastic
More informationData sheet chainflex CF8821
1. Outer jacket: Pressure extruded, oil-resistant PVC mixture 2. Overall shield: Braiding made of tinned copper wires 3. Overall banding: Plastic foil 4. Core insulation: Mechanically high-quality TPE
More informationCable drag chain systems
able drag chain systems MP 45.1, MP 45.2 New chain series 45 interior height With additional noise reduction 1 MP 45.1 OPN MP 45.2 MULTLN OPN LOW-OST VRNT SOT-STOP SYSTM SUTL OR UNVRSL US N RKT WT NTRT
More informationigubal Pressfit Spherical Bearings Easy to fit Extremely cost-effective Chemical-resistant Light weight High strength
igubal Pressfit Spherical earings Easy to fit Extremely cost-effective Chemical-resistant Light weight High strength 791 igubal Pressfit Spherical earings The use of pivoting s is usually associated with
More informationS/SX Tubes series Extremely robust and sturdy covered steel cable carriers
S/SX Tubes Extremely robust and sturdy covered steel cable carriers Trademarks are legally protected for the TSUBAKI KABELSCHLEPP GmbH as a national or international registration in the following countries:
More informationigubal Pivoting Bearings igubal Pivoting Bearings Phone Fax Easy to fit Extremely cost-effective
igubal igubal Easy to fit Extremely cost-effective Resistant to chemicals Light weight High strength 55.1 igubal Technical data igubal igus GmbH 51147 Cologne Internet www.igus.de E-mail info@igus.de The
More informationConductor: Fine-wire strand consisting of bare copper wires (following DIN EN 60228). Mechanically high-quality TPE mixture. (see colour code table)
Outer jacket: Pressure extruded PVC mixture Inner jacket: Pressure extruded, gusset filling PVC mixture Conductor: Fine-wire strand consisting of bare copper wires 6 1 Core insulation: Mechanically highquality
More informationigus the-chain moving energy made easy Modular toolbox for almost every application and industry light & quick for heavy-weights
Modular toolbox for almost every application and industry light & quick for heavy-weights More than 2,400 employees worldwide igus - Headquarter, Cologne Germany 35 igus subsidiaries world wide (and more
More information... Moving energy made easy... for robots
obotics...... Moving energy made easy... for robots... 2016... ndustry Moving energy made easy for robot applications The modular robot construction kit comprises over 5,000 different items. We can offer
More informationConductor: Fine-wire strand consisting of bare copper wires (following DIN EN 60228). Mechanically high-quality TPE mixture. (see colour code table)
Outer jacket: Pressure extruded, gusset filling PVC mixture 12 cores or more: Bundles with optimized pitch length and pitch direction Conductor: Fine-wire strand consisting of bare copper wires Core insulation:
More informationSelection BASIC LINE BASIC LINE PLUS VARIO LINE SERIES TUBE LINE
PLUS 332 - Steel cable carriers solutions for extreme applications PLUS Robust design for heavy mechanical loads High additional loads and long unsupported lengths possible Best suited for extreme and
More informationE-ChainSystems. Installation instruction for harnessed E-Chains with more than one coil. plastics for longer life
E-ChainSystems Installation instruction for harnessed E-Chains with more than one coil register igus E-ChainSystems installation instruction for harnessed E-Chains with more than one coil. E-Chain delivory
More informationCable drag chain systems
able drag chain systems MP 45.1, MP 45.2 New chain series 45 interior height With additional noise reduction 1 MP 45.1 OPN MP 45.2 MULTLN OPN RU-OST SOT-STOP SYSTM UNVRSL US N RKT WT NTRT STRN RL RO NTROR
More informationSLE SLE CHARACTERISTICS. Travel. Travel speed. Acceleration. Temperature. Special types. closed + open. application fields SLE
SLE SLE applications 81 SLE dimensions 82 SLE types 84 SLE sizes 86 SLE parts 87 SLE assembly 88 SLE connectors 83 SLE part numbers 92 SLE accessories 98 load / (kg/m) inner height / (mm) 60 LOAD DIAGRAM
More informationWarehousing...Distribution Centers... Logistics. andling. plastics for longer life ECS-B12
aterial Warehousing...Distribution Centers... Logistics andling plastics for longer life... www.igus.com/materialhandling 1 ECS-B12 igus products... Maintenance-free plastic products in indoor and outdoor
More information... Moving energy made easy for robots
obots...... Moving energy made easy...... for robots... 2017... QuickRobot Complete energy supply tool for robots Moving energy made easy for robot applications The modular robot construction kit comprises
More informationCable drag chain systems MP 35.1, MP 35.2
able drag chain systems MP 35.1, MP 35.2 1 MP 35.1 OPN MP 35.2 MULTLN OPN LOW-OST VRNT SOT-STOP SYSTM SUTL OR UNVRSL US N RKT WT NTRT STRN RL XTNSV N SY TO NSTLL NTROR LYOUT 49 35 30 68-193 TNL T Loading
More informationData sheet chainflex CF270.UL.D
For detailed overview please see design table 1. Outer jacket: Pressure extruded PUR mixture 2. Overall shield: Bending-resistant braiding made of tinned copper wires. 3. Banding: Plastic fleece 4. Core
More informationRACK JACK. Synchronous Lifting Systems
RACK JACK Synchronous Lifting Systems RACK JACK (ROUND RACK TYPE) Operation The Rack Jack from WMH Herion provides simple synchronous lifting motion. The system of rack and pinion transforms linear motion
More informationRACK JACK. Synchronous Lifting Systems
RACK JACK Synchronous Lifting Systems RACK JACK (ROUND RACK TYPE) Operation The Rack Jack from WMH Herion provides simple synchronous lifting motion. The system of rack and pinion transforms linear motion
More informationDryLin R Linear Plain Bearings, Fast and Quiet
+90º 40º +250º 100º Linear Plain Bearings, Fast and Quiet linear plain bearings, made from solid polymers, are dimensionally equivalent to standard ball bearings. They are made entirely of wear resistant
More informationHigh tensile strength. Vibration dampening. Noise dampening. Lightweight
High tensile strength Vibration dampening Noise dampening Can be used in combination with rod end bearings from the dimensional series E Lightweight 20.1 igubal clevis joints are all made of igumid G according
More informationData sheet chainflex CF886
1. Outer jacket: Pressure extruded PVC mixture 2. Overall shield: Braiding made of tinned copper wires 3. Shield foil: Aluminium clad plastic foil 4. Banding: Plastic foil 5. Filling: Plastic yarns 6.
More informationContents. EasyLine EFK MultiLine EFK 14. MultiLine EFK MultiLine EFK MultiLine EFK 35. MultiLine EFK page 201.
Contents Cable drag chain systems open EasyLine EFK 10.1 page 201 MultiLine EFK 14 page 206 MultiLine EFK 18.1 page 210 MultiLine EFK 18.2 page 214 MultiLine EFK 35 page 218 MultiLine EFK 3000 page 224
More information