SINGLE HUNG - LARGE MISSILE IMPACT (SHOWN w/different OPTIONS)

Transcription

1 - LRGE MISSILE IMPT (SHWN w/different PTINS) GENERL NTES: 1. THE PRDUT SHWN HEREIN IS DESIGNED ND MNUFTURED T MPLY WITH THE FLRID UILDING DE (F), URRENT EDITIN INLUDING THE HIGH VELITY HURRINE ZNE (HVHZ) ND IS RTED FR WIND ZNE MISSILE LEVEL D IMPT USE S DEFINED IN STM E 199 PER THE F. L, FLRID /" M. VERLL FLNGE 7" M. UNIT 37 5/1" M. SSH 5 3/8" VERLL FLNGE WIDTH 53 1/8" M. UNIT WIDTH 8 15/1" DL D 33 15/1" DL 3" DL 3 1/" VERLL FLNGE 2" M UNIT 30 5/1" M SSH 37 1/" VERLL FLNGE WIDTH 3" M UNIT WIDTH 31 13/1" DL 27" DL 27" DL 2. GLZING PTINS: (SEE 2) 3. NFIGURTINS: "/".. DESIGN PRESSURE RTING: -NEGTIVE DESIGN LDS SED N, TESTED PRESSURE ND TLES STM E PSITIVE DESIGN LDS SED N, TESTED PRESSURE, WTER INFILTRTIN TEST PRESSURE ND TLES STM E NHRGE: THE 33 1/3% STRESS INRESE HS NT EEN USED IN THE DESIGN F THIS PRDUT. SEE FR NHR DETILS. WINDLD DURTIN FTR d=1. WS USED FR WD NHR LULTINS.. PRDUT PPRVED FR IMPT RESISTNE. THE IMPT RTRY LKS RE INTENDED T E LEFT UNLTHED DURING NRML PERTIN UT MUST E ENGGED PRIR T EPSURE T HURRINE WINDS ND FLYING DERIS. 7. LL FRMES ND VENTS FULLY WELDED. SMLL JINT SEM SELNT USED T FIED MEETING RIL ND JM. 8. SERIES / MDEL DESIGNTIN SH THE DESIGNTIN ND STND FR THE FLLWING: = PERLE SSH, = FIED SSH 10. SETIN LLUTS PPLY T LL ELEVTINS IN SIMILR LTIN. 11. ETERNL WEEP SLT = 1/" x 1-1/" LTED " FRM TH ENDS PV IMPT UPDTED PER 201 F UPDTED PER 2010 F UPDTED PER F REQ DE 07/07/08 Y: DESRIPTIN: REVISINS N.: 3/8" DL 9 1 M. SSH WIDTH 28" DL 31 5/1" M SSH WIDTH. SWEEP LKS INSTLLED N WINDWS VER 3" x 2". LUS. TURNER, P.E. 39 JR VE. NRTH PRT, FL 3288 TLE F NTENTS GENERL NTES & ELEVTINS...1 GLZING DETILS...2 SETIN VIEWS & LT. FRME...3 ETRUSINS &..M... NHR SHEDULE & NTES...5 INSTLLTIN DETILS... LTIN NN-HVHZ HVHZ NN-HVHZ HVHZ M. UNIT SIZE 53-1/8" x 7" 3" x 2" DESIGN PRESSURE RTING +/- 5 PSF +/- 7.5 PSF +5 / -75 PSF +7.5 / -75 PSF IMPT RTING LRGE MISSILE IMPT DESRIPTIN: GENERL NTES ND ELEVTINS DRWN Y: DE 0/10/08 WS-155 SLE: 1:1 1 F

2 7/8" VERLL INSULTED 7/8" VERLL INSULTED 7/1" IRSPE 5/1" LMINTED 7/1" IRSPE 5/1" LMINTED L, FLRID 37 PV INTERLYER Y DUPNT DURSEL Y TRUSEL.090" PV INTERLYER Y DUPNT DURSEL Y TRUSEL 8100 PV IMPT 38 TYPE FIED LITE 18 PURFET GLZE "H" R SIKFLE 552 1/2" ITE TYPE SSH LITE 18 PURFET GLZE "H" R SIKFLE 552 1/2" ITE UPDTED PER 201 F UPDTED PER 2010 F UPDTED PER F REQ DE 07/07/08 Y: DESRIPTIN: REVISINS N.: 7/8" VERLL INSULTED 7/8" VERLL INSULTED 1/8" TEMPERED 1/8" TEMPERED 7/1" IRSPE 7/1" IRSPE 5/1" LMINTED 5/1" LMINTED.090" PV INTERLYER Y DUPNT.090" PV INTERLYER Y DUPNT DURSEL Y TRUSEL DURSEL Y TRUSEL 18 PURFET GLZE "H" R SIKFLE PURFET GLZE "H" R SIKFLE /2" ITE 1/2" ITE LUS. TURNER, P.E. 39 JR VE. NRTH PRT, FL 3288 DESRIPTIN: GLZING DETILS DRWN Y: DE 0/10/08 TYPE FIED LITE TYPE SSH LITE WS-155 SLE: 1:1 2 F

3 INTERIR L, FLRID PV IMPT INTERIR 20 SETIN VIEW - NTE: LEFT SIDE SHWS FIED SETIN VIEW, RIGHT SIDE SHWS SSH SETIN VIEW. 2 UPDTED PER 201 F UPDTED PER 2010 F UPDTED PER F REQ DE 07/07/08 Y: DESRIPTIN: REVISINS N.: SETIN VIEW - 1 LUS. TURNER, P.E. 39 JR VE. NRTH PRT, FL 3288 DESRIPTIN: SETIN VIEW - N SWEEP LKS LLWED FR UNITS 3" x 2" ND UNDER. LTERNTE FIN FRME SWEEP LK REQUIRED FR SIZES VER 3" x 2". SETIN VIEWS DRWN Y: DE 0/10/08 ITEMS NT SHWN FR LRITY: 22, 27-28, 33-37, 3-5 WS-155 SLE: 1:2 3 F

4 PRTS LIST ITEM PRT # DESRIPTIN MTERIL VENDR 1 H-031 Frame Head, Flg, Single Hung PV MIKRN 2 H-031 Frame Sill, Flg, Single Hung PV MIKRN 3 H-031 Frame Jamb, Flg, Single Hung PV MIKRN H-183 lum. Fixed Meet. Rail LUMINUM KEYMRK 5 S-03 Fixed Rail over PV MIKRN H-027 Sash Top Rail PV MIKRN 7 H-197 Reinforcement for STR LUMINUM KEYMRK 8 H-028 Sash ottom Rail PV MIKRN 9 H-199 Reinforcement for SR LUMINUM KEYMRK 10 H-00 Sash Side Rail PV MIKRN 11 S-198 Reinforcement for SSR LUMINUM KEYMRK S-0 Glazing ead PV MIKRN 13 P-3118 Keeper, Sweep Lock ZIN SULLIVN 1 P-351 #8 x 1/2", Pan Head, Tek STEEL FSTENL 15 P-32 Sweep Lock ZIN SULLIVN 1 P-33 arrel Fastener STEEL FSTENL 17 lock & Tackle alance STEEL LDWELL 18 Purfect Glaze "H" or Sikaflex 552 SILINE HENKEL/SIK 19 Sash SEE 2 RDINL 20 Fixed SEE 2 RDINL 21 P-329 Wstp., x back FinSeal NYLN ULTRF 22 P-38 #8 x 2-1/2 PH Mod. Truss, Type, TEK 2 STEEL FSTENL 23 #10 x 1 1/2" Panhead SMS STEEL FSTENL 2 Flat Washer STEEL FSTENL 25 S-01 Screen atch PV MIKRN 2 S-013 Screen Support PV MIKRN 27 P-051 #8 x 1 1/" Ph Fh TEK, Wht. ZIN FSTENL 28 P-378 # x 0.25" Quad Fh TEK, Wht. ZIN FSTENL 29 P-3783 Impact, Lock STEEL INTERLK 30 P-09 Impact, Keeper STEEL INTERLK 31 P-2 #8 x 3/ FH PH w/# Head, TEK, Wht STEEL FSTENL 32 P-3218 Screen Frame LUMINUM LLMETL 33 P-3321 Screen orner Key PLSTI M&M 3 P-3228 Screen Spline RUER DP 35 P-3581 Screen loth VINYL WIER 3 P-3033 Screen Spring STEEL HURLEY 37 P-3029 Screen Pull Tab STEEL HURLEY 38 P-3352 Set. lk. 1/8" x 5/8" x 2" RUER FRNK LWE 39 P-378 #8 x 5/8 Phil Pan Zinc ZIN FSTENL 0 P-79 Weepcover PLSTI M&M 1 P-3113 Screw Support RUER TEM 2 P-025 Sash Stop PV MIKRN 3 P-3059 Sash am PLSTI M&M P-3295 Take ut lip STEEL SUMMIT 5 P-332 Seam Sealer SILINE SHNEE P-3752 Hole Plug PLSTI M&M 7 H-08 Frame Head, FIN, Single Hung PV MIKRN 8 P-959 Wstp., 0.20 x back NYLN ULTRF /1" 3 1/8" PV FRME FLNGE /8" 1" PV FRME FIN /1" 2 7/8" PV SSH STP /" 3/1" 11 REINF. S..R./S.S.R /2" 1 5/8" 1 15/1" PV SSH TM. RIL /1" 1 5/8" 8 1 5/8" PV SSH TP RIL-027 PV SREEN TH PV FIED RIL VER - 03 PV SREEN SUPPRT /" 15/1" 1 1/8" REINF. TM RIL PV SSH SIDE RIL-00 5/8" 1" 7 5/1" 1 1/8" 2 1 5/1" 25.05" 9 2 1/8" 9/1" 2 3/1" 1 1/2" FIED RIL REINF. TP RIL /" 7/8" FRME RNER NSTRUTIN RNER WELD (LL SIDES) 1:8 FIED MEETING RIL SREWED TGETHER WITH UTERFRME 1:8 PV GLZING ED-0 L, FLRID PV IMPT UPDTED PER 201 F UPDTED PER 2010 F UPDTED PER F REQ DE 07/07/08 LUS. TURNER, P.E. 39 JR VE. NRTH PRT, FL 3288 DESRIPTIN: Y: DESRIPTIN: REVISINS N.: 1/2" M ND ETRUSINS 3/1" 3" SREW SUPPRT DRWN Y: DE 0/10/08 WS-155 NTE: LL ETRUSINS RE LUMINUM 03-T UNLESS THERWISE NTED. SLE: 1:2 F

5 15" M... " M. " M. 1" M... " " NHR LYUT - (FLNGE) SIZES VER 3" x 2" " M. 8" M... " M. 8" M... L MTG RIL NHR LYUT - (FIN) SIZES VER 3" x 2" NHR T MIDSPN " M. " M /1" M... " NHR LYUT - (FLNGE) SIZES 3" x 2" ND UNDER " M. " M. 8" M... L MTG RIL 8" M... NHR LYUT - (FIN) SIZES 3" x 2" ND UNDER L, FLRID PV IMPT UPDTED PER 201 F UPDTED PER 2010 F UPDTED PER F REQ DE 07/07/08 Y: DESRIPTIN: REVISINS N.: NTES: 1. INSTLL NE NHR T EH INSTLLTIN LTIN. SILL NHR SPING SME S HED. 2. SHIM S REQ T EH INSTLLTIN NHR USING LD ERING SHIMS. M. LLWLE SHIM STK T E 1/". USE SHIMS WHERE SPE GRETER THN IS PRESENT. LD ERING SHIMS SHLL E NSTRUTED F HIGH DENSITY PLSTI R ETTER. WD SHIMS RE NT LLWED. 3. NHR TYPE, SIZE, SPING ND EMEDMENT SHLL E S SPEIFIED IN THESE DRWINGS,,.. LL INSTLLTIN NHRS MUST E MDE F R PRTETED WITH RRSIN RESISTNT MTERIL R TING. DISSIMILR METLS R MTERILS IN NTT WITH PRESSURE TRETED WD MUST E PRTETED T PREVENT RETIN. 5. INSTLLTIN NHRS SHLL E IN RDNE WITH NHR MNUFTURER'S INSTLLTIN INSTRUTINS, ND NHRS SHLL NT E USED IN SUSTRTES WITH STRENGTHS LESS THN THE MINIMUM SPEIFIED IN TLE 1,.. NHR EMEDMENT T SUSTRTE SHLL E EYND WLL DRESSING R STU. FR NRETE/MU PENINGS, EMEDMENT SHLL E EYND WD UKS, IF USED, INT SUSTRTE. INSTLLTINS T SLID NRETE R GRUT-FILLED MU MY INLUDE UT D NT REQUIRE 1 WD UKS ETWEEN THE PRDUT ND THE SUSTRTE. INSTLLTINS T HLLW MU REQUIRE THE USE F 1 UKS ETWEEN THE PRDUT ND SUSTRTE. 7. MINIMUM ENTER-T-ENTER SPING SHLL E MINTINED ETWEEN LL FSTENERS: 3" FR MSNRY, 1" FR WD ND METL. 8. WD R MSNRY PENINGS, UKS ND UK FSTENERS SHLL E PRPERLY DESIGNED Y THE RHITET R ENGINEER F RERD ND INSTLLED T TRNSFER WIND LDS T THE STRUTURE. SUSTRTES SHLL MEET THE MINIMUM STRENGTH REQUIREMENTS S SHWN IN TLE1,. NRETE ND MSNRY SUSTRTES MY NT E RKED. 9. SELING ND FLSHING STRTEGIES FR VERLL WTER RESISTNE F INSTLLTIN SHLL E DNE Y THERS FLLWING THE URRENT VERSIN F THE REFERENE DUMENTS: FM/M 100(FIN WINDWS), FM/M 200(FLNGE WINDWS), FM/WDM 250( WINDWS), FM/M/WDM 300(ETERIR DRS) LUS. TURNER, P.E. 39 JR VE. NRTH PRT, FL 3288 DESRIPTIN: NHR SHEDULE ND NTES DRWN Y: DE 0/10/08 WS-155 SLE: 1:25 5 F

6 SUSTRTE Y THERS Y INSTLLER INSIDE ND UT SELNT EHIND FLNGE Y INSTLLER TYPIL HED NHRGE MIN. EMEDMENT 1/" M. SHIM MIN. EMEDMENT 1/" M. SHIM INSTLLTIN NHR SUSTRTE Y THERS 1/" M. SHIM SUSTRTE Y THERS MIN. EMEDMENT L, FLRID PV IMPT INSTLLTIN NHR SELNT EHIND FLNGE Y INSTLLER 1/" M. SHIM HRIZNTL SETIN TYPIL JM NHRGE Y INSTLLER INSIDE ND UT SELNT EHIND FLNGE Y INSTLLER Y INSTLLER INSIDE ND UT INSTLLTIN NHR SELNT EHIND FIN Y INSTLLER HRIZNTL SETIN TYPIL FIN NHRGE HED ND SILL SIMILR FR FIN INSTLLTIN UPDTED PER 201 F UPDTED PER 2010 F UPDTED PER F REQ DE 07/07/08 Y: DESRIPTIN: REVISINS N.: Y INSTLLER INSIDE ND UT MIN. EMEDMENT SUSTRTE Y THERS VERTIL SETIN TYPIL SILL NHRGE FRME TYPE SUSTRTE TYPE NHR TYPE MIN. EMEDMENT FLNGE NRETE (2.0 KSI MIN.) 3/1" ITW TPN 1-1/2" 1-1/8" FLNGE HLLW R GRUT-FILLED MU (117 PF MIN.) 3/1" ITW TPN 1" 2" FLNGE NRETE (2.85 KSI MIN.) 3/1" EL ULTRN 1" 1" FLNGE GRUT-FILLED MU (STM -90) 3/1" EL ULTRN 1-1/" 2-1/2" FLNGE 2 MIN. SUTHERN PINE (G=0.55) 3/1" ITW TPN R EL ULTRN 1-3/8" 7/8" FLNGE 2 MIN. SUTHERN PINE (G=0.55) #10 WD SREW 1-3/8" 7/8" FLNGE FLNGE 1 GUGE (0.00") MIN. STEEL STUD (33 KSI YIELD MIN) 1/8" LUM. (03-T5 MIN.) R 1/8" STEEL (33 KSI MIN.) TLE 1: PPRVED INSTLLTIN FSTENERS #10-1 HILTI KWIK-FLE R ITW TEKS SELF-DRILLING SREW #10 GRDE 5 SELF-TPPING / DRILLING SREW FULL THRED THRU 0.00" FULL THRED THRU 0.5" FIN 2 MIN. SUTHERN PINE (G=0.55) #8 WD SREW 1-1/2" 7/1" 7/1" 7/1" Y INSTLLER INSIDE ND UT D HRIZNTL SETIN FRME INSTLLTIN HED ND SILL SIMILR FR INSTLLTIN FLNGE REMVL NTE: PRTILLY R FULLY REMVING THE FLNGE, UP T ND INLUDING -FRME PPLITIN IS EPTLE PRVIDED: - MIN. 1/" FILLET F NSTRUTIN-GRDE DHESIVE ULK IS PPLIED INSIDE ND UT, FULL PERIMETER, Y INSTLLER. - PRDUT NHRGE IS IN RDNE WITH REQUIREMENTS S SHWN FR FLNGE WINDWS. LUS. TURNER, P.E. 39 JR VE. NRTH PRT, FL 3288 DESRIPTIN: INSTLLTIN DETILS DRWN Y: DE 0/10/08 WS-155 SLE: 1:2 F