H-20/35 Series Proportioning Unit

Transcription

1 "Teamwork & Communication" H-20/35 Series Proportioning Unit Parts Identification Manual ID April 5, 2000 Issue 2 GUSMER CORPORATION A Subsidiary of Gusmer Machinery Group, Inc. One Gusmer Drive Lakewood, New Jersey, USA Toll Free (USA & Canada) Phone: (732) Fax: (732) Copyright 2000, GUSMER CORPORATION NOTICE: This manual contains important information for your GUSMER equipment. Read and retain for future reference.

2 H-20/35 Series Proportioning Unit NOTICE: The equipment described in this technical manual must only be operated or serviced by properly trained individuals, thoroughly familiar with the operating instructions and limitations of the equipment. For technical service, call your local distributor. Call: -800-FOR-GSMR ( ) for the name and telephone number of your local distributor. NOTICE: All statements, information and data given herein are believed to be accurate and reliable but are presented without guarantee, warranty or responsibility of any kind expressed or implied. Statements or suggestions concerning possible use of GUSMER equipment are made without representation or warranty that any such use is free of patent infringement, and are not recommendations to infringe any patent. The user should not assume that all safety measures are indicated or that other measures may not be required ID, Issue 2

3 Parts Identification Manual Contents CONTENTS LIST OF FIGURES...4 LIST OF TABLES...4 WARRANTY...5 H-20/35 SERIES ASSEMBLIES...6 FINAL ASSEMBLY...6 BASE ASSEMBLY...8 PUMPLINE ASSEMBLY...0 HYDRAULIC CYLINDER WITH SPACERS...2 PROPORTIONING PUMP ASSEMBLY...4 PRIMARY HEATER ASSEMBLY...6 REVERSING SWITCH ASSEMBLY...8 LUBE RESERVOIR HOSE ASSEMBLY...9 ELECTRICAL COMPONENTS...20 ELECTRICAL SCHEMATICS Volt Single Phase Volt 3 Phase Volt 3 Phase...34 INSTRUCTION MANUAL DISCREPANCY REPORT /5/2000 3

4 H-20/35 Series Proportioning Unit LIST OF FIGURES FIGURE FINAL ASSEMBLY, (PART NO SIZE), EXPLODED VIEW... 6 FIGURE 2 BASE ASSEMBLY, (PART NO HP-230 / 4250-PH-230), EXPLODED VIEW... 8 FIGURE 3 PUMPLINE ASSEMBLY, (PART NO SIZE), EXPLODED VIEW... 0 FIGURE 4 HYDRAULIC CYLINDER WITH SPACERS, (PART NO. 425), EXPLODED VIEW... 2 FIGURE 5 PROPORTIONING PUMP ASSEMBLY, (PART NO SIZE/42450-SIZE), EXPLODED VIEW... 4 FIGURE 6 PRIMARY HEATER ASSEMBLY, (PART NO SIZE/42360-SIZE), EXPLODED VIEW... 6 FIGURE 7 REVERSING SWITCH ASSEMBLY, (PART NO. 4252), EXPLODED VIEW... 8 FIGURE 8 LUBE RESERVOIR HOSE ASSEMBLY, (PART NO. 5585), EXPLODED VIEW... 9 FIGURE 9 ELECTRICAL COMPONENTS (SHEET OF 2) FIGURE 0 ELECTRICAL COMPONENTS (SHEET 2 OF 2)... 2 FIGURE ELECTRICAL SCHEMATIC 230 VOLT SINGLE PHASE, (SHEET OF 6) FIGURE 2 ELECTRICAL SCHEMATIC 230 VOLT SINGLE PHASE, (SHEET 2 OF 6) FIGURE 3 ELECTRICAL SCHEMATIC 230 VOLT SINGLE PHASE, (SHEET 3 OF 6) FIGURE 4 ELECTRICAL SCHEMATIC 230 VOLT SINGLE PHASE, (SHEET 4 OF 6) FIGURE 5 ELECTRICAL SCHEMATIC 230 VOLT SINGLE PHASE, (SHEET 5 OF 6) FIGURE 6 ELECTRICAL SCHEMATIC 230 VOLT SINGLE PHASE, (SHEET 6 OF 6) FIGURE 7 ELECTRICAL SCHEMATIC 230 VOLT 3 PHASE, (SHEET OF 6) FIGURE 8 ELECTRICAL SCHEMATIC 230 VOLT 3 PHASE, (SHEET 2 OF 6) FIGURE 9 ELECTRICAL SCHEMATIC 230 VOLT 3 PHASE, (SHEET 3 OF 6) FIGURE 20 ELECTRICAL SCHEMATIC 230 VOLT 3 PHASE, (SHEET 4 OF 6)... 3 FIGURE 2 ELECTRICAL SCHEMATIC 230 VOLT 3 PHASE, (SHEET 5 OF 6) FIGURE 22 ELECTRICAL SCHEMATIC 230 VOLT 3 PHASE, (SHEET 6 OF 6) FIGURE 23 ELECTRICAL SCHEMATIC 380 VOLT 3 PHASE, (SHEET OF 6) FIGURE 24 ELECTRICAL SCHEMATIC 380 VOLT 3 PHASE, (SHEET 2 OF 6) FIGURE 25 ELECTRICAL SCHEMATIC 380 VOLT 3 PHASE, (SHEET 3 OF 6) FIGURE 26 ELECTRICAL SCHEMATIC 380 VOLT 3 PHASE, (SHEET 4 OF 6) FIGURE 27 ELECTRICAL SCHEMATIC 380 VOLT 3 PHASE, (SHEET 5 OF 6) FIGURE 28 ELECTRICAL SCHEMATIC 380 VOLT 3 PHASE, (SHEET 6 OF 6) LIST OF TABLES TABLE FINAL ASSEMBLIES, (PART NO SIZE), PARTS... 7 TABLE 2 BASE ASSEMBLIES, (PART NO PH-230 / 4250-PH-230), PARTS... 9 TABLE 3 PUMPLINE ASSEMBLY, (PART NO SIZE), PARTS... TABLE 4 HYDRAULIC CYLINDER WITH SPACERS, (PART NO. 425), PARTS... 3 TABLE 5 PROPORTIONING PUMP ASSEMBLY, (PART NO SIZE/42450-SIZE), PARTS... 5 TABLE 6 PRIMARY HEATER ASSEMBLY, (PART NO SIZE/42360-SIZE), PARTS... 7 TABLE 7 REVERSING SWITCH ASSEMBLY, (PART NO. 4252), PARTS LIST... 8 TABLE 8 LUBE RESERVOIR HOSE ASSEMBLY, (PART NO. 5585), PARTS LIST... 9 TABLE 9 ELECTRICAL SCHEMATIC, (PARTS LIST) ID, Issue 2

5 Parts Identification Manual Contents WARRANTY Gusmer Corporation (Gusmer) provides a limited warranty to the original purchaser (Customer) of Gusmer manufactured parts and equipment (Product) against any defects in material or workmanship for a period of one year from the date of shipment from Gusmer facilities. In the event Product is suspected to be defective in material or workmanship, it must be returned to Gusmer, freight prepaid. If Product is found to be defective in material or workmanship, as determined solely by Gusmer, Gusmer will issue full credit to Customer for the freight charges incurred in returning the defective Product, and either credit will be issued for the replacement cost of the Product or a replacement part will be forwarded no-charge, freight prepaid to Customer. This warranty shall not apply to Product Gusmer finds to be defective resulting from: installation, use, maintenance, or procedures not accomplished in accordance with our instructions; normal wear; accident; negligence; alterations not authorized in writing by Gusmer; use of look alike parts not manufactured or supplied by Gusmer; or Product used in conjunction with any other manufacturer's pumping or proportioning equipment. Further, the terms and conditions of this warranty shall not apply to services or repairs made to Product by any third party not authorized in writing by Gusmer. For such Product, a written estimate will be submitted to Customer at a nominal service charge, itemizing the cost for repair. Disposition of Product will be done in accordance with the terms stated on the written estimate. The warranty provisions applied to product that are not manufactured by Gusmer will be solely in accordance with the warranty provided by the original manufacturer of the product. GUSMER MAKES NO WARRANTY WHATSOEVER AS TO THE MERCHANTABILITY OF, OR SUITABILITY FOR, ITS PRODUCT TO PERFORM ANY PARTICULAR PURPOSE. CREDIT FOR, OR REPLACEMENT OF, PRODUCT DEFECTIVE IN MATERIAL OR WORKMANSHIP SHALL CONSTITUTE COMPLETE FULFILLMENT OF GUSMER OBLIGATIONS TO CUSTOMER. NO OTHER WARRANTY, EXPRESSED OR IMPLIED ON ANY PRODUCT IT MANUFACTURES AND/OR SELLS, WILL BE RECOGNIZED BY GUSMER UNLESS SAID WARRANTY IS IN WRITING AND APPROVED BY AN OFFICER OF GUSMER. Under no circumstances shall Gusmer be liable for loss of prospective or speculative profits, or special indirect, incidental or consequential damages. Further, Gusmer shall have no liability for any expenses including, but not limited to personal injury or property damage resulting from failure of performance of the product, use of the product, or application of the material dispensed through the product. Any information provided by Gusmer that is based on data received from a third source, or that pertains to product not manufactured by Gusmer, while believed to be accurate and reliable, is presented without guarantee, warranty, or responsibility of any kind, expressed or implied. Gusmer through the sale, lease, or rental of Product in no way expresses or implies a license for the use of, nor encourages the infringement of any patents or licenses. To insure proper validation of your warranty, please complete the warranty card and return it to Gusmer within two weeks of receipt of equipment. Revised /2/98 4/5/2000 5

6 H-20/35 Series Proportioning Unit H-20/35 SERIES ASSEMBLIES FINAL ASSEMBLY Figure Final Assembly, (Part No SIZE), Exploded View NOTE: Consult page 20 of this Manual for Electrical Components not called out in this Assembly ID, Issue 2

7 Parts Identification Manual Assemblies TABLE FINAL ASSEMBLIES, (PART NO SIZE), PARTS Part Number Description Quantity Hex Head Cap Screw 433A- Ball Valve 2 433A-3 Swivel Union 3 483A-3 Hex Nipple 2 65B-2 Socket Head Cap Screw Button Head Machine Screw Helical Lockwasher Hex Head Cap Screw Socket Head Cap Screw Helical Lockwasher Directional Valve Strainer Strainer Screen (30 Mesh) (Includes ) Gasket Strainer Screen (80 Mesh) (Includes ) Spring Remote Compensator Releif Valve PSI Releif Valve PSI Remote Compensator Bracket R R R Pressure Switch Pressure Switch Pressure Switch 9758 Helical Lockwasher O-Ring Elbow O-Ring Tube Elbow PSI Liquid Fill Gauge 5585 Lube Reservoir Hose Assembly 5586 Lube Bottle Drip Pan A/R Pump/Heater Tube Assembly Compensator Tube Assembly 423 R - Preheater Cover 4236 A - Preheater Cover Pumpline Assembly Lubr Reservoir Bracket PH-230 Base Assembly OP56-33 Swivel Union 4/5/2000 7

8 H-20/35 Series Proportioning Unit BASE ASSEMBLY Figure 2 Base Assembly, (Part No HP-230 / 4250-PH-230), Exploded View ID, Issue 2

9 Parts Identification Manual Assemblies TABLE 2 BASE ASSEMBLIES, (PART NO PH-230 / 4250-PH-230), PARTS Part Number Description Quantity Flange Nut Hex Head Cap Screw Flat Washer Heax Head Cap Screw Hex Head Cap Screw Hose Elbow 54-3 Helical Lockwasher Hex Head Cap Screw Hose Elbow Hose Elbow 5486 Hex Head Cap Screw Hex Head Cap Screw Helical Lockwasher Grommet Reservoir Drain Plug Flat Washer Tube Elbow PSI Liquid Fill Gauge Fluid Level Gauge Hydraulic Pump HP Motor (3 Phase 230 Volts) 5 HP Motor (SIngle Phase 230 Volts) Elbow 450- Hydraulic Oil Filler Hydraulic Reservoir Return Hydraulic Reservoir Return O-Ring Tube Elbow Bleed Hose Assembly Swivel Castor Threaded Rod Street Elbow R - Primary Heater 6000W A - Primary Heater 6000W OutletTube Assembly T-Port Hose P-Port Hose Console Bracket (Right) Console Bracket (Left) Suction Flange Outlet Flange Access Cover Plate Gasket Chemical Manifold Tank Cover Plate Preheater Mounting Blocks Suction Tube Dip Tube 4270 Hydraulic Tank 4/5/2000 9

10 H-20/35 Series Proportioning Unit PUMPLINE ASSEMBLY Figure 3 Pumpline Assembly, (Part No SIZE), Exploded View ID, Issue 2

11 Parts Identification Manual Assemblies TABLE 3 PUMPLINE ASSEMBLY, (PART NO SIZE), PARTS Part Number Description Quantity Socket Head Cap Screw Flush Seal Pipe Plug 2 065A-0 Lockwasher 2 065A-9 Hex Nut Hex Head Cap Screw 6 404A Button Head Cap Screw Lube Cylinder Adapter Plate Male Elbow O-Ring O-Ring Bronze Bushing Flat Head Cap Screw Hex Head Cap Screw Lube Hose Fitting 5484A-4 Polyethylene Pipe Plug Helical Lockwasher Tube Elbow Male Elbow O-Ring Elbow Iso Lube Cylinder 554 Hydraulic Cylinder Clevis Clevis Pin Baffle 2808 Socket Head Cap Screw Resin Proportioning Pump Assembly Resin Proportioning Pump Assembly Pump Mounting L-Bracket Activator Plate Iso Proportioning Pump Assembly Iso Proportioning Pump Assembly 425 Hydraulic Cylinder with Spacers Hydraulic Manifold 4252 Reversing Switch Assembly Reversing Switch Cover 4/5/2000

12 H-20/35 Series Proportioning Unit HYDRAULIC CYLINDER WITH SPACERS Figure 4 Hydraulic Cylinder with Spacers, (Part No. 425), Exploded View * Torque to 200 Inch-Pounds ID, Issue 2

13 Parts Identification Manual Assemblies TABLE 4 HYDRAULIC CYLINDER WITH SPACERS, (PART NO. 425), PARTS Part Number Description Quantity 50B-0-0 Piston Assembly 50B-0-2 Retainer Plate 2 50B-0-4 Cylinder Body 50B-0-7 Rod Bushing 50B-- O-Ring 2 50B--2 U-Cup 2 50B--3 Back Up Ring 2 50B--4 Teflon Glass Wear Ring 50B--6 O-Ring 50B--7 Back Up Ring 50B--8 Rod Wiper 50B--9 Shaft Seal 55- Proportioning Pump Spacer (Torque to 200 Inch-Pounds) Reversing Switch Pump Spacer (Torque to 200 Inch-Pounds) 55-3 Hydraulic Cylinder Tie Rod (Torque to 200 Inch-Pounds) Port Block 2 4/5/2000 3

14 H-20/35 Series Proportioning Unit PROPORTIONING PUMP ASSEMBLY Figure 5 Proportioning Pump Assembly, (Part No SIZE/42450-SIZE), Exploded View * Torque to 50 FT-LBS ** Torque to 30 FT-LBS ID, Issue 2

15 Parts Identification Manual Assemblies TABLE 5 PROPORTIONING PUMP ASSEMBLY, (PART NO SIZE/42450-SIZE), PARTS Part Number Description Quantity O-Ring A Back Up Ring Dowel Pin Dowel Pin 0455 Valve Ball Packing Support Washer O-Ring Flush Seal Pipe Plug Hex Nut (Torque to 30 FT-LBS) O-Ring Valve Ball 820 O-Ring 9489 Grease Fitting (Resin Side ONLY) Pump Cylinder Pump Cylinder Valve Ball Seat (Torque to 50 FT-LBS) Seat Seal Gasket Pump Clevis 7402 Check Valve Retainer 7406 Check Valve Seat 7407 Check Valve Seal 2008 Socket Head Cap Screw Piston Support Washer Piston Support Washer Wear Ring Wear Ring PKG PKG Piston Rod with Head Piston Rod with Head Spring LP LP Piston Lip Seal Set Piston Lip Seal Set LP LP Cylinder Lip Seal Set Cylinder Lip Seal Set Inlet Ball Sleeve & Stop Crossover Tube Pump Tie Rod Outlet Pump Flange Outlet Pump Flange Lower Pump Base Upper Pump Base R - Retaining Flange Retaining Ring Retaining Ring 4/5/2000 5

16 H-20/35 Series Proportioning Unit PRIMARY HEATER ASSEMBLY Figure 6 Primary Heater Assembly, (Part No SIZE/42360-SIZE), Exploded View ID, Issue 2

17 Parts Identification Manual Assemblies TABLE 6 PRIMARY HEATER ASSEMBLY, (PART NO SIZE/42360-SIZE), PARTS Part Number Description Quantity 023- Acorn Nut Flush Seal Pipe Plug Heat Exchanger Heat Exchanger Tube Elbow Flush Seal Pipe Plug Thermocouple Flush Seal Pipe Plug Hex Nut Flat Washer Tie Rod Ferrule Nut /4 Tube Body Preheater Flange Thermostat Spring R - Preheater Flange Heating Element 500W Preheater Cover Standoff 2 4/5/2000 7

18 H-20/35 Series Proportioning Unit REVERSING SWITCH ASSEMBLY Figure 7 Reversing Switch Assembly, (Part No. 4252), Exploded View TABLE 7 REVERSING SWITCH ASSEMBLY, (PART NO. 4252), PARTS LIST Part Number Description Quantity 0578A Reversing Switch Flat Washer Spring Reversing Switch Rocker Arm Rocker Arm Slide Pad Rocker Arm Pin Hitch Pin Clip Socket Head Cap Screw Reversing Switch Bracket ID, Issue 2

19 Parts Identification Manual Assemblies LUBE RESERVOIR HOSE ASSEMBLY Figure 8 Lube Reservoir Hose Assembly, (Part No. 5585), Exploded View TABLE 8 LUBE RESERVOIR HOSE ASSEMBLY, (PART NO. 5585), PARTS LIST Part Number Description Quantity Rubber Grommet 485A-7 Supply Line /6 OD Grommet Lube Reservoir Check Valve Hose Clamp Lube Bottle Cap Return Line 4/5/2000 9

20 H-20/35 Series Proportioning Unit ELECTRICAL COMPONENTS Figure 9 Electrical Components (Sheet of 2) Note: For schematic symbol part numbers and descriptions see Table 9 on page ID, Issue 2

21 Parts Identification Manual Electrical Components Figure 0 Electrical Components (Sheet 2 of 2) Note: For schematic symbol part numbers and descriptions see Table 9 on page 40. 4/5/2000 2

22 H-20/35 Series Proportioning Unit ELECTRICAL SCHEMATICS 230 Volt Single Phase Figure Electrical Schematic 230 Volt Single Phase, (Sheet of 6) ID, Issue 2

23 Parts Identification Manual Electrical Schematics Figure 2 Electrical Schematic 230 Volt Single Phase, (Sheet 2 of 6) 4/5/

24 H-20/35 Series Proportioning Unit Figure 3 Electrical Schematic 230 Volt Single Phase, (Sheet 3 of 6) ID, Issue 2

25 Parts Identification Manual Electrical Schematics Figure 4 Electrical Schematic 230 Volt Single Phase, (Sheet 4 of 6) 4/5/

26 H-20/35 Series Proportioning Unit Figure 5 Electrical Schematic 230 Volt Single Phase, (Sheet 5 of 6) ID, Issue 2

27 Parts Identification Manual Electrical Schematics Figure 6 Electrical Schematic 230 Volt Single Phase, (Sheet 6 of 6) 4/5/

28 H-20/35 Series Proportioning Unit 230 Volt 3 Phase Figure 7 Electrical Schematic 230 Volt 3 Phase, (Sheet of 6) ID, Issue 2

29 Parts Identification Manual Electrical Schematics Figure 8 Electrical Schematic 230 Volt 3 Phase, (Sheet 2 of 6) 4/5/

30 H-20/35 Series Proportioning Unit Figure 9 Electrical Schematic 230 Volt 3 Phase, (Sheet 3 of 6) ID, Issue 2

31 Parts Identification Manual Electrical Schematics Figure 20 Electrical Schematic 230 Volt 3 Phase, (Sheet 4 of 6) 4/5/2000 3

32 H-20/35 Series Proportioning Unit Figure 2 Electrical Schematic 230 Volt 3 Phase, (Sheet 5 of 6) ID, Issue 2

33 Parts Identification Manual Electrical Schematics Figure 22 Electrical Schematic 230 Volt 3 Phase, (Sheet 6 of 6) 4/5/

34 H-20/35 Series Proportioning Unit 380 Volt 3 Phase Figure 23 Electrical Schematic 380 Volt 3 Phase, (Sheet of 6) ID, Issue 2

35 Parts Identification Manual Electrical Schematics Figure 24 Electrical Schematic 380 Volt 3 Phase, (Sheet 2 of 6) 4/5/

36 H-20/35 Series Proportioning Unit Figure 25 Electrical Schematic 380 Volt 3 Phase, (Sheet 3 of 6) ID, Issue 2

37 Parts Identification Manual Electrical Schematics Figure 26 Electrical Schematic 380 Volt 3 Phase, (Sheet 4 of 6) 4/5/

38 H-20/35 Series Proportioning Unit Figure 27 Electrical Schematic 380 Volt 3 Phase, (Sheet 5 of 6) ID, Issue 2

39 Parts Identification Manual Electrical Schematics Figure 28 Electrical Schematic 380 Volt 3 Phase, (Sheet 6 of 6) 4/5/

40 H-20/35 Series Proportioning Unit Reference Letter TABLE 9 ELECTRICAL SCHEMATIC, (PARTS LIST) Part Number Description Quantity 04DISC Disconnect Disconnect Handle 07DIST Pole Terminal Block 07GND Ground Terminal Block 07N Neutral Terminal Block 09MSP Motor Circuit Protector (x230 60HZ) Motor Circuit Protector (3x230V) Motor Circuit Protector (3x380V) 09MTR HP Single Phase 60Hz Motor (x220 60Hz) HP Three Phase 50/60 Hz Motor (3x230V) HP Three Phase 50/60 Hz Motor (3x380V) 3CB Circuit Breaker for 6000W Heater (x220 60Hz) Circuit Breaker for 6000W Heater (3x230V) Circuit Breaker for 6000W Heater (3x380V) 3PH Watt Cartridge Heater (x220 60Hz) Watt Cartridge Heater (3x230V) Watt Cartridge Heater (3x380V) 4 8CB Circuit Breaker for 6000W Heater (x220 60Hz) Circuit Breaker for 6000W Heater (3x230V) Circuit Breaker for 6000W Heater (3x380V) 8PH Watt Cartridge Heater (x220 60Hz) Watt Cartridge Heater (3x230V) Watt Cartridge Heater (3x380V) 4 23CB Circuit Breaker (x220 60Hz) Circuit Breaker (3x230V) Circuit Breaker (3x380V) 23CB Circuit Breaker 23PHC V Phase Controller (x220 60Hz) V Phase Controller (3x230V) V Phase Controller (3x380V) 23T Multi-Tap Hose Transformer 23CT Ammeter Current Transformer 25POT Potentiometer (x220 60Hz) Potentiometer (3x230V) Potentiometer (3x380V) 25AMP A Ammeter 204CB Circuit Breaker (x220 60Hz) Circuit Breaker (3x230V) Circuit Breaker (3x380V) ID, Issue 2

41 Parts Identification Manual Electrical Schematics Reference Letter Part Number Description Quantity 204T VAC Control Transformer 207CB Circuit Breaker 20PL Light Base Pilot Light w/o Lens Mounting Latch V Lamp Clear Lens 23PB Red Mushroom Head Switch Mounting Latch N.O. Switch Block N.C. Switch Block L0257 E-Stop Label 23SW Amber Switch Mounting Latch N.O. Switch Block N.C. Switch Block 23PL Light Base V Lamp 25CRM Relay Relay Base 29SW Green Lens Mounting Latch N.O. Switch Block N.C. Switch Block 29PL Light Base V Lamp 22MR Contactor 227CTR Digital Counter 229PL Light Base Pilot Light w/o Lens Mounting Latch V Lamp Amber Lens 23Q Quencharc 232SOL Replacement 20VAC Solenoid Coil 234PS Pressure Switch Din Connector 234PS Pressure Switch Din Connector 234SW Position Switch Mounting Latch N.O. Switch Block 234SW2 0578A Replacement Micro-Switch 235Q Quencharc 236SOL Replacement 20VAC Solenoid Coil 238PL Light Base Pilot Light w/o Lens Mounting Latch V Lamp Amber Lens 303TS Over Temperature Safety Switch 4/5/2000 4

42 Reference Letter H-20/35 Series Proportioning Unit Part Number Description Quantity 303TS Over Temperature Safety Switch 303TS Over Temperature Safety Switch 303TS Over Temperature Safety Switch 303SW Green Switch Mounting Latch N.O. Switch Block N.C. Switch Block 303PL Light Base V Lamp 305CR Contactor 307TEMP Temperature Controller 309CR SSR 3TC Thermocouple 38TS Over Temperature Safety Switch 38TS Over Temperature Safety Switch 38TS Over Temperature Safety Switch 38TS Over Temperature Safety Switch 38SW Green Lens Mounting Latch N.O. Switch Block N.C. Switch Block 38PL Light Base V Lamp 320CR Contactor 322TEMP Temperature Controller 324CR SSR 326TC Thermocouple 343SW Green Lens Mounting Latch N.O. Switch Block N.C. Switch Block 343PL Light Base V Lamp 345CR Contactor 348TEMP Temperature Controller 350CR SSR 352TC TSU TSU Replacement Plug Assembly ID, Issue 2

43 Parts Identification Manual Instruction Manual Discrepancy Report INSTRUCTION MANUAL DISCREPANCY REPORT Field Field Title Number Date Description 2 Name 3 IM Number 4 Issue Number 5 Date of Issue 6 Page Number 7 Discrepancy Instructions: Complete the above fields of the form by following the instructions listed on the reverse side of this sheet and mail to: Gusmer Corporation One Gusmer Drive PO Box 2055 Lakewood, NJ /5/

44 H-20/35 Series Proportioning Unit Field Field Title Number Date Enter date report is submitted. Description 2 Name Enter name of person making report. 3 IM Number Enter the Part Number of the Instruction Manual from the title page. 4 Issue Number Enter the Issue number of the Instruction Manual from the title page. If there is no issue number, enter NONE. 5 Date of Issue Enter the date of Issue of the Instruction Manual from the title page. If there is no issue date, enter NONE. 6 Page Number Enter the page number containing the discrepancy 7 Discrepancy Provide a brief description of discrepancy NOTE: You may send a marked copy of the page as an attachment to your submittal ID, Issue 2