Model GX Spray Gun

Size: px

Start display at page:

Download "Model GX Spray Gun"

Hugh Shepherd
5 years ago
Views:

"Teamwork & Communication" Model GX-7-400 Spray Gun Parts Identification Manual 17943-ID May 24, 1999 Issue 2 GUSMER CORPORATION A Subsidiary of Gusmer Machinery Group, Inc.

1 "Teamwork & Communication" Model GX Spray Gun Parts Identification Manual ID May 24, 1999 Issue 2 GUSMER CORPORATION A Subsidiary of Gusmer Machinery Group, Inc. One Gusmer Drive Lakewood, New Jersey, USA Toll Free (USA & Canada) Phone: (732) Fax: (732) Copyright 1999, GUSMER CORPORATION NOTICE: This manual contains important information for your GUSMER equipment. Read and retain for future reference.

2 Model GX Spray Gun NOTICE: The equipment described in this technical manual must only be operated or serviced by properly trained individuals, thoroughly familiar with the operating instructions and limitations of the equipment. For technical service, call your local distributor. Call: FOR-GSMR ( ) for the name and telephone number of your local distributor. NOTICE: All statements, information and data given herein are believed to be accurate and reliable but are presented without guarantee, warranty or responsibility of any kind expressed or implied. Statements or suggestions concerning possible use of GUSMER equipment are made without representation or warranty that any such use is free of patent infringement, and are not recommendations to infringe any patent. The user should not assume that all safety measures are indicated or that other measures may not be required ID, Issue 2

3 Parts Identification Manual Contents CONTENTS LIST OF FIGURES...4 LIST OF TABLES...4 WARRANTY...5 ASSEMBLIES...6 GX-7-4OO GUN ASSEMBLY...6 SPRAY GUN HANDLE ASSEMBLY...8 GX-7 COUPLING BLOCK ASSEMBLY...10 APPENDIX...11 INSTRUCTION MANUAL DISCREPANCY REPORT /24/99 3

4 Model GX Spray Gun LIST OF FIGURES FIGURE 1 GX GUN ASSEMBLY, (PART NO 17100A), EXPLODED VIEW... 6 FIGURE 2 SPRAY GUN HANDLE ASSEMBLY, (PART NO 17111), EXPLODED VIEW... 8 FIGURE 3 GX-7-COUPLING BLOCK ASSEMBLY, (PART NO 16140), EXPLODED VIEW LIST OF TABLES TABLE 1 GX GUN ASSEMBLY (PART NO A), PARTS... 7 TABLE 2 SPRAY GUN HANDLE ASSEMBLY (PART NO ), PARTS... 9 TABLE 3 GX-7-COUPLING BLOCK ASSEMBLY (PART NO ), PARTS TABLE 4. SPECIFICATIONS FOR GUN S MODULE TABLE 5. SET-UP CHART FOR GUN S MODULE ID, Issue 2

5 Parts Identification Warranty WARRANTY Gusmer Corporation (Gusmer) provides a limited warranty to the original purchaser (Customer) of Gusmer manufactured parts and equipment (Product) against any defects in material or workmanship for a period of one year from the date of shipment from Gusmer facilities. In the event Product is suspected to be defective in material or workmanship, it must be returned to Gusmer, freight prepaid. If Product is found to be defective in material or workmanship, as determined solely by Gusmer, Gusmer will issue full credit to Customer for the freight charges incurred in returning the defective Product, and either credit will be issued for the replacement cost of the Product or a replacement part will be forwarded no-charge, freight prepaid to Customer. This warranty shall not apply to Product Gusmer finds to be defective resulting from: installation, use, maintenance, or procedures not accomplished in accordance with our instructions; normal wear; accident; negligence; alterations not authorized in writing by Gusmer; use of look alike parts not manufactured or supplied by Gusmer; or Product used in conjunction with any other manufacturer's pumping or proportioning equipment. Further, the terms and conditions of this warranty shall not apply to services or repairs made to Product by any third party not authorized in writing by Gusmer. For such Product, a written estimate will be submitted to Customer at a nominal service charge, itemizing the cost for repair. Disposition of Product will be done in accordance with the terms stated on the written estimate. The warranty provisions applied to product that are not manufactured by Gusmer will be solely in accordance with the warranty provided by the original manufacturer of the product. GUSMER MAKES NO WARRANTY WHATSOEVER AS TO THE MERCHANTABILITY OF, OR SUITABILITY FOR, ITS PRODUCT TO PERFORM ANY PARTICULAR PURPOSE. CREDIT FOR, OR REPLACEMENT OF, PRODUCT DEFECTIVE IN MATERIAL OR WORKMANSHIP SHALL CONSTITUTE COMPLETE FULFILLMENT OF GUSMER OBLIGATIONS TO CUSTOMER. NO OTHER WARRANTY, EXPRESSED OR IMPLIED ON ANY PRODUCT IT MANUFACTURES AND/OR SELLS, WILL BE RECOGNIZED BY GUSMER UNLESS SAID WARRANTY IS IN WRITING AND APPROVED BY AN OFFICER OF GUSMER. Under no circumstances shall Gusmer be liable for loss of prospective or speculative profits, or special indirect, incidental or consequential damages. Further, Gusmer shall have no liability for any expenses including, but not limited to personal injury or property damage resulting from failure of performance of the product, use of the product, or application of the material dispensed through the product. Any information provided by Gusmer that is based on data received from a third source, or that pertains to product not manufactured by Gusmer, while believed to be accurate and reliable, is presented without guarantee, warranty, or responsibility of any kind, expressed or implied. Gusmer through the sale, lease, or rental of Product in no way expresses or implies a license for the use of, nor encourages the infringement of any patents or licenses. To insure proper validation of your warranty, please complete the warranty card and return it to Gusmer within two weeks of receipt of equipment. Revised 11/12/98 5/24/99 5

6 Model GX Spray Gun ASSEMBLIES GX-7-4OO GUN ASSEMBLY Figure 1 GX Gun Assembly, (Part No 17100A), Exploded View ID, Issue 2

7 Parts Identification Manual Assemblies Reference Letter TABLE 1 GX GUN ASSEMBLY (PART NO A), PARTS Part Number Description Quantity A 2130 Air Hose 1 B Pkg Coupling Block Gasket (Package of 2) 1 C Coupler Plug 1 D Coupler 1 E Check Valve Assembly 2 F SS SS Valving Rod 1 G Screen-80 Mesh Screen-60 Mesh (Optional) Screen-40 Mesh (Optional) H A A-Gun Block Screen Screw (Includes G) 1 J R R-Gun Block Screen Screw (Includes G) 1 K 16131A-2 Screen Screw Seal 2 L Coupling Block Mounting Screw 1 M Rear Packing Retainer 1 N Rear Seal Packing 1 P Rear Seal Retainer 1 Q Spray Gun Handle Assembly 1 R Pattern Control Disc Retainer W/ Air 1 S Air Cap 1 * T SIZE Module * U SIZE SIZE Pattern Control Disc Pattern Control Disc (Gold) 1 1 V Gun Block 1 * See Appendix for Recommended Sizes /24/99 7

8 Model GX Spray Gun SPRAY GUN HANDLE ASSEMBLY Figure 2 Spray Gun Handle Assembly, (Part No 17111), Exploded View ID, Issue 2

9 Parts Identification Manual Assemblies Reference Letter TABLE 2 SPRAY GUN HANDLE ASSEMBLY (PART NO ), PARTS Part Number Description Quantity A Socket Head Cap Screw 1 B IP851-3 O-Ring 1 C 1123B-2 O-Ring 6 D 1123B-4 O-Ring 3 E 2020 Lock Nut 1 F 2113E-1-6 O-Ring 1 G Needle Valve Packing 1 H Spray Gun Trigger 1 J Socket Head Cap Screw 4 K Valve Nut 1 L Spool Valve Liner 2 M Spring Seat 1 N O-Ring 1 P Air Valve Spring 1 Q 8124 Spool Valve 1 R Spray Gun Handle 1 S Cylinder Front Stop 1 T O-Ring 1 U Air Piston Assembly 1 V Pipe Nipple 1 W Stop Clamp Screw 1 X Nylon Pellet 1 Y Gun Block Mount 1 Z Air Needle Valve 1 AA Spring 1 AB Socket Head Cap Screw 1 AC Cylinder End Cap Screw 1 AD Trigger Mounting Screw 1 AE Spring 1 AF O-Ring 1 AG Rod Draw Bar 1 AH O-Ring 1 AJ Gasket 1 AK Spacer 1 AL Two Position Stop 1 Rebuild Kits Not Shown Trigger Rebuild Kit (Includes C,D,F,N, & P) 1 Not Shown Air Cylinder Rebuild Kit (Includes B,C,T,AF, & AH 1 5/24/99 9

10 Model GX Spray Gun GX-7 COUPLING BLOCK ASSEMBLY Reference Letter Figure 3 GX-7-Coupling Block Assembly, (Part No 16140), Exploded View TABLE 3 GX-7-COUPLING BLOCK ASSEMBLY (PART NO ), PARTS Part Number Description Quantity A 377 Pipe Plug 2 B 1142 R-Swivel Fitting 2 C 1143 A-Swivel Fitting 1 D 3133 Pipe Plug 1 E 5105 Manual Valve Assembly 2 F Coupling Block W/ Plugs and Valves (Includes A, D, & E) ID, Issue 2

11 Parts Identification Manual Appendix APPENDIX TABLE 4. SPECIFICATIONS FOR GUN S MODULE MODULE CLEANOUT SPADE Part No. Diameter in/(mm) Iso Port Part No. Diameter in/(mm) Polyol Port Part No. Diameter in/(mm) (3.18) (.42) (.45) (3.18) (.45) (.45) (3.18) (.45) (.45) (3.18) (.51) (.51) (3.18) (.64) (.57) WARNING: EACH MODULE HAS A SPECIALLY SIZED CLEANOUT SPADE. TO AVOID DAMAGE TO THE MODULE TAKE CARE TO USE THE CORRECT SPADE. 5/24/99 11

12 Model GX Spray Gun TABLE 5. SET-UP CHART FOR GUN S MODULE Pressure (psi) Output (lbs/min) Pattern Dia. (Inches) Module Part No. Iso Port Size Number of Orifices Polyol Port Size Number of Orifices PCD Round Spray Pattern ** ** Fan Spray Pattern **16 x **16 x **16 x Part No SIZE is manufactured with Teflon Coating Part No SIZE is manufactured With a Gold Color Coating Module Cleanout Drill Size Part No SIZE * At 24 inches above substrate ** At 18 inches above substrate ID, Issue 2

13 Parts Identification Manual Instruction Manual Discrepancy Report INSTRUCTION MANUAL DISCREPANCY REPORT Field Field Title Number 1 Date Description 2 Name 3 IM Number 4 Issue Number 5 Date of Issue 6 Page Number 7 Discrepancy Instructions: Complete the above fields of the form by following the instructions listed on the reverse side of this sheet and mail to: Gusmer Corporation One Gusmer Drive PO Box 2055 Lakewood, NJ /24/99 13

14 Model GX Spray Gun Field Field Title Number 1 Date Enter date report is submitted. Description 2 Name Enter name of person making report. 3 IM Number Enter the Part Number of the Instruction Manual from the title page. 4 Issue Number Enter the Issue number of the Instruction Manual from the title page. If there is no issue number, enter NONE. 5 Date of Issue Enter the date of Issue of the Instruction Manual from the title page. If there is no issue date, enter NONE. 6 Page Number Enter the page number containing the discrepancy 7 Discrepancy Provide a brief description of discrepancy NOTE: You may send a marked copy of the page as an attachment to your submittal ID, Issue 2

Model D Spray Gun. Parts Identification Manual 2943J-ID. "Success through Unity" June 17, 2003 Issue 2 GUSMER CORPORATION

Model D Spray Gun. Parts Identification Manual 2943J-ID. Success through Unity June 17, 2003 Issue 2 GUSMER CORPORATION "Success through Unity" Model D Spray Gun Parts Identification Manual 2943J-ID June 17, 2003 Issue 2 GUSMER CORPORATION A Subsidiary of Gusmer Machinery Group, Inc. One Gusmer Drive Lakewood, New Jersey,