ACCURATE AND CUSTOMIZABLE NTC THERMISTORS. For temperature control, sensing and compensation
|
|
|
- Aubrey Curtis
- 5 years ago
- Views:
Transcription
1 AURATE AND USTOMIZALE NT THERMISTORS For temperature control, sensing an compensation
2 Precision. TEMPERATURE SENSING, OMPENSATION AND ONTROL WITH AMETHERM NT THERMISTORS Ametherm NT thermistors are manufacture from a specially-formulate metal oxie ceramic material that is extremely accurate in sensing temperature. Same high quality material is use in wie variety of housings an leae parts for various applications such as: HVA Refrigeration Floor Heating Surface Temperature Measurement orrosive Environments PART NUMERING SYSTEM P A N E J X X X PART LETTERING PROE ASSEMLY PART LETTERING LEADED NT 0/50 TOLERANE USTOM PART PANE PANR PANH PANT PANW Epoxy Ring Lug Steel Tube Threae Threae with tip NT05 T02 Disc (3mm ia) Disc (5mm ia) hip (2mm with) x10 2 = x10 3 = x10 3 = x10 4 = ºK ºK ºK ºK ºK None 10% J 5% H 3% G 2% F 1% PANE Series - Probe Assembly / Epoxy DESRIPTION Epoxy ip coate NT thermistor, solere between jackete Teflon / PV wires Fast response, with high accuracy (to ±1%) for temperature sensing Small imensions allow easy installation Point or urve matche ustomizable for your nees ost effective APPLIATIONS Motors Air Sensors / HVA Transformers Heat Sinks Automotive ELETRIAL SPES MEHANIAL SPES A PANE urve Dissipation onstant (mw/º) onstant (sec) St. Part PANE M PANE M PANE L PANE L PANE L PANE L PANE R PANE R PANE S PANE S A / Dia. of part 3.0 ± 0.5 / Length of tip 5.5 ± 0.5 / Length of leas ± 7.0 / Length of strip 5.0 ± º 150º Operating Temp T: : (Outsie the Unite States an anaa) : : info@ametherm.com
3 PANR Series - Probe Assembly / Ring Lug DESRIPTION Epoxy coate NT thermistor, potte in tinne copper ring lug Ieal for surface temperature sensing Rugge Point or urve matche ustomizable for your nees ost effective APPLIATIONS Surface Temperature Sensing Heat Sinks Pipes Refrigeration ELETRIAL SPES MEHANIAL SPES A1 E PANR urve Dissipation onstant (mw/º) onstant (sec) St. Part A2 Epoxy PANR M PANR M A1 / Outer Dia. of lug 9.5 ± 0.3 A2 / Inner Dia. of lug 4.4 ± 0.3 G PANR L / Length of lug 18.6 ± 0.5 F PANR L / Length of leas ± 7.0 PANR L / Length of strip 5.0 ± 0.5 PANR L PANR R E / Thickness of Lug 1.0 ± 0.2 F /Outer Dia. of barrel 5.5 ± 0.2 PANR R G / Length of barrel 6.5 ± 0.3 PANR S / #6 Lug PANR S º 150º Operating Temp PANH Series - Probe Assembly / close en metal tubing DESRIPTION NT thermistor insie urable stainless steel alloy tube, epoxy fille Environmental protection Humiity resistant Fast response, with high accuracy (to ±1%) for temperature sensing Rugge construction ost effective ELETRIAL SPES APPLIATIONS Floor Heating HVA Inustrial Evaporator Refrigeration MEHANIAL SPES A PANH urve Dissipation onstant (mw/º) onstant (sec) St. Part PANH1 PANH2 PANH M PANH M PANH L PANH L PANH L PANH L PANH R PANH R PANH S PANH S A / Dia. of part 3.7 ± ± 0.5 / Length of tip 15.0 ± ± 4.0 / Length of leas ± 7.0 / Length of strip 5.0 ± º 150º Operating Temp T: : (Outsie the Unite States an anaa) : : info@ametherm.com
4 PANT Series - Probe Assembly / threae tip & hex DESRIPTION NT thermistor potte insie aluminum hex screw with straight threas Ieal for temperature sensing, measurement an compensation where screwing is necessary Fast response, with high accuracy (to ±1%) Rugge construction ost effective APPLIATIONS Heating & ooling systems HVA Inustrial Laboratory Heat Sinks hassis mounting ELETRIAL SPES MEHANIAL SPES A 2 PANT urve Dissipation onstant (mw/º) onstant (sec) St. Part A 1 PANT M A1 / Length of threa 6.0 ± 0.5 PANT M A2 / Dia. of threa 3.2 ± 0.5 PANT L / Hex nut thickness 9.3 ± 0.5 PANT L PANT L / Length of leas ± 7.0 / Length of strip 5.0 ± 0.5 PANT L PANT R º 150º Operating Temp PANT R PANT S PANT S PANW Series - Probe Assembly / threae metal tubing & hex DESRIPTION NT thermistor potte at the tip of urable stainless steel alloy tube, with tapere threa hex screw Tapere threas will pull tight for a flui-tight seal Ieal for extreme conitions such as corrosive environments Fast response, with high accuracy (to ±1%) ue to the potting of thermistor at the very tip of the assembly APPLIATIONS Appliance temp measurements such as conventional ovens an microwaves Spas, hot tub ELETRIAL SPES MEHANIAL SPES A 2 PANW urve Dissipation onstant (mw/º) onstant (sec) St. Part A 1 PANW M A1 / Length of tip 37.0 ± 0.5 A 4 A 3 PANW M A2 / Dia. of tip 5.0 ± 0.5 PANW L A3 / Length of threa 10.0 ± 0.25 PANW L A4 / Dia. of threa 9.5 ± 0.5 PANW L PANW L / Hex nut thickness 6.0 ± 0.5 / Length of leas ± 7.0 PANW R / Length of strip 5.0 ± 0.5 PANW R PANW S º 150º Operating Temp PANW S T: : (Outsie the Unite States an anaa) : : info@ametherm.com
5 T Series - NT Thermistor with chip DESRIPTION NT chip thermistor with or without coating with tinne copper leas Wie resistance selection ost effective Fast response, with high accuracy (to ±1%) APPLIATIONS Refrigeration attery pack Amplifier circuits ELETRIAL SPES MEHANIAL SPES A 2 urve Dissipation onstant (mw/º) onstant (sec) St. Part A 1 T M T M T L T L T L T L T R T R T S T S A1 / Length of part 5.0 ± 0.5 A2 / Dia. of part 2.5 ± 0.5 / Length of leas 38.0 ± 2.0 S / Lea spacing 3.2 ± 0.5 / Lea iameter 0.5 ± 0.1 e / Lea spacing 0.5 ± 0.1 b / oat runown 2.5 ± 0.3 c b NT Series - NT Thermistor with isc DESRIPTION NT isc thermistor with or without coating with tinne copper leas Wie resistance selection ost effective Fast response, with high accuracy (to ±1%) Point or curve matche with interchangeable thermistors APPLIATIONS Automotive electronic Inustrial electronic Heating Systems ELETRIAL SPES MEHANIAL SPES urve Dissipation onstant (mw/º) onstant (sec) Letter / Dimensions St. Part NT05 D M M L L L L R R S NT M NT M NT M NT N NT L NT L NT R NT R NT S NT S A / Dia. of part 3.0 ± ± 1.0 t / Thickness 3.0 ± ± 0.5 / Length of leas 38.0 ± ± 2.0 S / Lea spacing 3.0 ± ± 1.0 e / Lea spacing 0.5 ± ± 0.4 / Lea iameter 0.5 ± ± 0.1 / oat runown 2.5 ± ± 0.5 T S L l T: : (Outsie the Unite States an anaa) : : info@ametherm.com
6 Temperature oefficients Ametherm Probe Assembly an NT /T urve Temp o M N L R S p 300Ωcm 900Ωcm 2100Ωcm 3000Ωcm 33000Ωcm 3500 K 3750 K 3950 K 4111 K 4500 ºK ontact us toay for more information or to orer your free samples. T: (Outsie the US an anaa) F: info@ametherm.com 3111 N. Deer Run Roa arson ity, Nevaa USA Type R (KOhm) ALSO AVAILALE THROUGH US & INTERNATIONAL Digi-Key Mouser Newark EUROPE Thomatronik UNITED KINGDOM Rhopoint omponents HINA IS Electronics MALAYSIA I Resource For a complete list of Ametherm istributors, please visit T (elsium)
ACCURATE AND CUSTOMIZABLE NTC THERMISTORS. For temperature control, sensing and compensation
AURATE AND USTOMIZALE NT THERMISTORS For temperature control, sensing an compensation 800-808-2434 www.ametherm.com Precision. TEMPERATURE SENSING, OMPENSATION AND ONTROL WITH AMETHERM NT THERMISTORS Ametherm
Pipe and Flange Protection
Pipe an Flange Protection Pipe Caps 78-82 Pipe Plugs 82-83 Flange Protection 84-89 77 Protect! Pipe an Flange Protection Moss offer a wie range of Plastic Protection Proucts for pipes an flanges. Our range
NTC Thermistors. Vishay FEATURES. Custom designed executions Application specific leads, housings, and connectors. NTC Thermistors Screw terminal
Custom designed executions Application specific leads, housings, and connectors TOLERANCE AT R25 C RANGE OPERATING TEMPERATURE RANGE APPLICATIONS Screw terminal 2322 640 73 5% 100 to 470k -25 to +100 C
PRODUCTS FOR THE HYDRAULICS INDUSTRY
PROUCTS FOR THE HYRAULICS INUSTRY SPIRALGUAR SPIRALGUAR High Performance Hose an Cable Protection How to calculate quantity: Outsie iameter of hose Length (m) of hose Insie iameter of Spiralguar X to be
TUBE INSERTS. Your Guide To Finding the right Tube Gauge size: Ribbed Square Inserts
TUBE INSERTS Your Guie To Fining the right Tube Gauge size: Tube Gauge Calculation Metal tubes are available in various tube gauges, although the most commonly use in furniture manufacture range from 10
TEMPERATURE SENSOR ASSEMBLIES (PROBE)
Discription: TEMPERATURE SENSORS A temperature sensor is an element that sensed the temperature changes, then translate the measured temperature into an electrical signal which then providing the data
TEMPERATURE SENSORS TEMPERATURE SENSORS
TEMPERATURE SENSORS TE Connectivity is a leader in the design and manufacture of NTC thermistors, RTDs, thermocouples, thermopiles, digital output and customized sensor assemblies. Building on our long
Rexnord Tollok Locking Assemblies
Tollok Catalog ownloa the most up-to-ate version at www.rexnor.com/ocumentation Rexnor Tollok Locking Assemblies Why Choose Rexnor Tollok Locking Assemblies? Why Choose Rexnor? When it comes to proviing
Pipe bracket spacing and support of pipelines
Pipe an support of pipelines General Pipe support for plastics pipes Plastic pipe systems shoul be installe using supports esigne for use with plastics an shoul then be installe taking care not to amage
PARALLEL PNEUMATIC MINIATURE GRIPPER
PARALLEL PNEUMATI MINIATURE GRIPPER Major enefits High grip force to weight ratio ompact size Two body styles with a total of four sizes available in both imperial and metric versions Spring assist on
PVC AND CPVC PRESSURE PIPES ASTM D-1785 and F-441 Schedule 80
2 PVC AN CPVC PRESSURE PIPES ASTM -1785 an F-441 Scheule 80 PVC ASTM 1785 SCHEULE 80 NOMINAL OUTSIE IAMETER PVC SCHEULE 80 WALL THICKNESS WORKING PRESSURE WEIGHT IN IN MM IN MM PSI @73F LB/FT 10022 1/8
NTC Thermistor Assemblies
FEATURES Standard and custom assemblies are available in a variety of configurations Assemblies can conveniently attach to or be an integral part of any system to monitor or control temperature No added
Output Current Input Current Over Voltage. VDC VDC ma ma(typ.) ma(typ.) VDC μf % MKZI10-24S
Doc. E-92 MKZI1 SERIES D/D ONVERTER 1W, Reinforced Insulation, Railway ertified FEATURES Industrial Standard 2" 1" Package Ultra-wide Input Range 9-36VD, 18-75VD, -1VD I/O Isolation 3VA with Reinforced
QuadLube, SpreadLock Seal, ImpactTuff, DuraLube TM Spherical Plain Bearings
QuaLube, SpreaLock Seal, ImpactTuff, uralube TM Spherical Plain earings Innovative prouct features that provie unique performance avantages. High loa capacity, re-lubrication options, an patente esigns.
MGO Thermocouples. Controls. Connection Head. Connection Head. Thermowells. Junction Fittings. Connectors Connection Heads.
Connection Head Type J, K, T and E Grounded Ungrounded Exposed Sheath Materials 304 Stainless Steel 316 Stainless Steel Inconel 600 Standard Aluminum Aluminum Flip Top Cast Iron/Aluminum 316 Stainless
RoundWay Linear Roller Guides #11
RounWay Linear Roller Guies #11 3 13 1 2 4 NW 5 NW 6 8 10 NW NW 7 9 11 12 14 IGST LODS, OST RUGGD, STST SPD ND LRTION RounWay* Linear Roller Guies Offer: Up to twenty times the loa capacity of conventional
Unimaster Dust Collectors Series UMA
Unimaster Dust ollectors Series UM 70-2 require for maintenance Lifting bracket (removable) 20 minimum clearance 80 require for cleaner motor cover removal leane air outlet 102 coustic iffuser (may be
ORDERING INFORMATION:
OUBLE HUNG SLIER 9200 SASH & KEEPERS The options available on Truth Hardware s 9200 Series Sash Locks are virtually endless. There are bases with or without alignment lugs which are helpful in preventing
*内輪/B126-B128/E_*内輪/B126-B128/E 11/05/25 10:07 ページ 127 Inner Rings
Inner Rings Inner Rings Inner Rings Inner Rings Many of the neele roller bearings use a shaft as the irect raceway surface without using inner ring. However, it is recommene to use any of the inner rings
SEALS FOR NEEDLE ROLLER BEARINGS
Precautions for Use Features Seals for Neele Roller Bearings have a low sectional height an consist of a sheet metal ring an special synthetic ruer. As these seals are manufacture to the same sectional
M150. Cable-Extension Position Transducer. World s Smallest Stringpot Range: inches High-Cycle Space-Critical Applications .
able-extension Position Transducer World s Smallest Stringpot Range: 0-1.5 inches High-ycle Space-ritical Applications M150 Specification Summary: GENERAL Full Stroke Range....0-1.5 inches Output Signal
Tapper Concrete Screw Anchor
Tapper PRODUCT INFORMATION Tapper Conrete Srew PRODUCT DESCRIPTION The Tapper fastening system is a omplete family of srew anhors for light to meium uty appliations in onrete, masonry blok an brik base
SECTION 7: MINIATURE SENSORS
SECTION 7: MINIATURE SENSORS Embedment sensors install in bearings for over-temperature protection Small, rugged RTDs and thermocouples withstand rough handling and harsh environments Certified non-sparking
Assembly Instructions-C70 Amphenol MMCX
Assembly Instructions-C70 Amphenol All parts of the connector are shown. Strip the inner conuctor, ielectric, an jacket as per RECOMMENDED CABLE STRIPPING DIM S in catalog. Slie the INSULATOR onto inner
Metal Oxide Varistor:TVR-D Series
Features. RoHS compliant 2. Boy size Ф7~ Ф 20mm 3. ie operating voltage range:5vac ~ 680Vac 4. High surge current rating up to 3K 5. High energy rating up to 720 Joule 6. Raial lea resin coate 7. Excellent
Forged Steel Valves. Gate / Globe / Check. DHV Industries, Inc. DHV Valve Company Inc.
3451 Pegasus Drive Bakersfiel, CA 93308 U.S.A. Call Toll Free: (877) DHV-USA1 Phone: (661) 392-8948 Fax: (661) 392-8947 E-mail: sales@hvinustries.com Website: www.hvinustries.com DHV Valve Company Inc.
What are RTD Sensors? Why Use Them? How Do They Work?
What are RTD Sensors? Why Use Them? How Do They Work? What is an RTD? Resistance Temperature Detectors (RTDs) are temperature sensors that contain a resistor that changes resistance value as its temperature
SOLAR MODULE SPECIFICATION
ABOUT US W ith an experience of over 3 years in manufacturing electrical accessories and with manufacturing units of PV Wires, conduit pipes and other electrical accessories in Delhi, our group was coaxed
Tension Brakes/High Heat Capacity
IST. UTORIZO Tension rakes/igh eat apacity MX (55) 53 63 23 31 Steel Water ooled rakes ost effective design One piece water jacket eliminates leakage Release springs ensure complete disengagement New friction
ECP44304T-4 300HP,1785RPM,3PH,60HZ,449T,A44152M,TEFC
Product Information Packet EP44304T-4 300HP,785RPM,3PH,60HZ,449T,A445M,TEF opyright All product information within this document is subject to Baldor Electric ompany copyright protection, unless otherwise
Presentation, Application Severe Duty Limit Switches Mill and Foundry Switches Conforming to NEMA A600 and UL508
Presentation, pplication Severe uty Limit Switches 0 onforming to NEM 600 and UL508 escription 9007T Mill Switches Use the 9007T Mill switches instead of other limit switches in the following applications:
DEE Shackle IS: ( Part- II ) DEE SHACKLE. Pin Diameter. Eye Outside Diameter. e min
EE Shackle IS: 6132-1971 ( Part- II ) φ φ S φ e EE SHACKLE Jaw Insie ith Insie Length Boy Material Pin Eye Outsie Safe orking Loa, Tonnes s=2.2 min e min Grae-30 Grae-40 Grae-63 Grae-80 18 40 10 12 24
On the market there are various types of V-belts, among which, the most 'widespread are: by SIT and shown in this catalogue are suitable to be used
V-Pulleys SIT V-Pulleys On the market there are various types of V-belts, among which, the most 'wiesprea are: narrow SP-SPA-SPB-SPC (ISO4184 - DIN 7753) classic -A-B-C (ISO 4184 - DIN 2215) American narrow
INTRODUCTION. MICROTEMP Thermal Cutoffs: Upper Limit Temperature Protection. Operating Principle of the MICROTEMP TCO
MICROTEMP Thermal Cutoffs: INTRODUCTION Upper Limit Temperature Protection MICROTEMP thermal cutoffs from Therm-O-Disc offer an accurate, reliable solution to the need for upper limit temperature protection.
COMPANY PROFILE. Our products have been supplied to local and foreign customers for the following industries:
CECK VAVES COMPANY PROFIE The company ARMATURY Group a.s. is a leaing Czech manufacturer an istributor of inustrial valves, fittings an control systems for valves. The annual prouction is of more than
A91 Series Thermistor Temperature Sensors For Duct, Immersion and Space Sensing
A91 Series Thermistor Temperature Sensors For Duct, Immersion and Space Sensing Installation Sheets Manual 121 Temperature Controls Section A Technical Bulletin A91 Issue Date 0179 Application These thermistor
Split pillow blocks
Definition an capabilities 638 Series 639 Variants 639 Design criteria: loas an torques 640 Installation/Assembly criteria: seal selection 641 Characteristics 642 Pillow block housing for bearings with
Output Current Input Current Reflected Ripple. Efficiency (typ.) (Range) VDC VDC ma ma(typ.) ma(typ.) ma(typ.) VDC μf % MTQZ50-72S05
Doc. EC-0094 FEATURES Industrial Standard Quarter Brick Package Wide Input Range 43-101VDC & 66-1VDC Excellent Efficiency up to 92% I/O Isolation 3000VAC with Reinforced Insulation Operating Ambient Temp.
Metal drill bits. Stronger than steel. Nothing stops the metal drill bits because we offer a drill bit for every application. HSS-E twist drill bit
HSS-E IN 338 cobalt 72-75 HSS IN 338 groun 76-79 HSS IN 338 stanar 80-84 HSS IN 338 stanar, shank reuce 85 HSS IN 340 86 HSS IN 1869 87 HSS hollow section rill bit / facae rill bit 88 HSS IN 345 89-90
General Information... Temperature/Resistance Table... Part Numbering Examples for RTD s. High Temperature MgO Elements (RA)...
Page General Information... Temperature/Resistance Table... Part Numbering Examples for RTD s High Temperature MgO Elements (RA).... Leadwire Style RTD s (RB).. Leadwire Style RTD s (RD, RE, RF, or RG
Variable area flowmeter DFM 165 to 350
ASV Stübbe GmbH & Co. KG Hollwieser Straße 5 D60 Vlotho Fon +9 (0) 57 33.7 990 Fax +9 (0) 57 33.7 99 00 www.asvstuebbe.e contact@asvstuebbe.e Variable area flowmeter DFM to 3 For all inustrial uses High
Poly16 Plus Compression Fittings Technical information
1 Poly16 Plus Compression Fittings Technical information Materials Boy, Thrust ring: polypropylene copolymer stabilize (PP-B), UV stabilize Nut: polypropylene copolymer stabilize (PP-B) with Master Batches
XTH-K-L-M-V Vishay Wet Tantalum Capacitors Cylindrical Body, Hermetically Sealed
XT-K-L-M-V Wet Tantalum Capacitors FEATURES igh temperature igh voltage igh capacitance Withstands high frequency vibration to 2000 z ermetically sealed Long shelf life SCC rawings 04032 & 04033 PERFORMANCE
Mineral Insulated Resistance Thermometers (RTD)
Mineral Insulated Resistance Thermometers (RTD) Electronic Temperature Measurement Data sheet : MIRTD/2012 Contents Page RTD Element Type 2 Conductors & Number of Wires 2 Probe Diameter 3 Length Types
Reliable Solutions for Continuous Casters
eliable Solutions for Continuous Casters For More Than A Century, Our Stanars Have Set The Stanar Aroun the worl, companies turn to Timken for innovation an reliability. With expertise in materials science
Tapping attachments Tap chucks Cutting fluids
Tapping attachments Tap chucks Cutting fluis Quality, reliability an goo service are what TAPMATIC stans for Since its establishment in 1952, Tapmatic has manufacture tapping attachments of the highest
Capillary Thermometers according to DIN Nitrogen Filled Option: Contacts
Capillary Thermometers accoring to DIN 16206 Nitrogen Fille Option: Contacts measuring monitoring analysing Environmentally-frienly measuring system with non-toxic nitrogen Fast response time Measuring
Technical handbook Compression Fittings and Clamp Saddles
Technical hanbook 2009 Compression Fittings an Clamp Sales 1 Poly16 Plus Compression Fittings Technical information Materials Boy, Thrust ring: polypropylene copolymer stabilize (PP-B), UV stabilize Nut:
The Ideal Locking Devices For Shaft-to-Hub Connections. Proven Design. Easy To Use
C-ROM Sizing Software ETP Keyless Shaft Mount Connections The Ieal ocking evices For Shaft-to-Hub Connections. ETP Connections are ieal for positioning an locking shaft components in a system. They are
Manual Applications. Tapping attachments for manual tapping application.
Manual Applications Tapping attachments for manual tapping application RX Newest series for high prouction with heavy uty ball clutch. Tapping attachments for rilling an milling machines an pneumatic,
CX 4 Heavy Duty Precision CNC Lathe
X 4 The X Series heavy duty precision N lathe by Kingston is designed for heavy and long work pieces for the energy, mining, textile, paper, and transportation industries. Utilizing the same headstock
isosteelpress Business Partner USA: Biomass Systems Supply P.O. Box 1835 Chico, CA 95927, USA
H isosteelpress A www.isoplus.k Business Partner USA: Biomass Systems Supply P.O. Box 1835 Chico, CA 95927, USA Toll Free: 877-474-5521 Office: 530-893-2444 Fax: 530-893-2244 info@biomasssystemssupply.com
Thermistor Thermometer MODEL NO
Digi -Sense Thermistor Thermometer MODEL NO. 60010-70 Digi -Sense CERTIFICATE OF CONFORMANCE This thermometer was calibrated using equipment traceable to the National Institute of Standards and Technology
Triple row axial angular contact ball bearings
Triple row angular contact ball bearings Series DKLF Heavy Series Features Bearings of series DKLF with a bore iameter of 30 mm an 40 mm are available in a Heavy series. This allows the user to achieve
Section 3: Introduction. Dipped Radial Capacitors. Foreword SOLID TANTALUM RESIN DIPPED SERIES TAP/TEP
ection 3: Introuction Forewor AVX offers a broa line of soli Tantalum capacitors in a wie range of sizes, styles, an ratings to meet any esign nees. This catalog combines into one source AVX s leae tantalum
Bimetal thermometers Index
Inex eneral information Prouct information With brass pocket page Inex 685 Brass pocket; Aluminium case 686 Brass pocket; 687 With brass probe page Brass probe; Aluminium case; Air uct thermometer 688
New! Products. Process Gauges Model 656 Open Front Stainless Steel Pressure Gauges A25
Products A25 Model 656 Open Front Stainless Steel New! SCRIPTION The 656 Series are suitable for corrosive environments in chemical, petrochemical, refining, power, marine, and food and pharmaceutical
Accessories. 6 Connectors t Technical. p Part. Inductive. Accessories. Inductive Sensors. Contents Inductive Proximity. Sensors.
Proximity In addition to our broad line of sensor products, alluff also offers many accessories to complement our sensors..60 Sensor Testers & ontroller.6 Sensor Protection evices.62 Prox Mounts.63 Prox
Wire-thread inserts. Heavy-duty threads for series or repair
Wire-threa inserts Heavy-uty threas for series or repair The center of excellence for highperformance fastening technology KVT-Fastening is an expert for high-quality fastening applications an offers engineering
FOR EVERYTHING ENCLOSURE
FOR EVERYTHING ENCLOSURE PVC EDGE PROTECTOR Provies excellent protection for steel eges 9 styles available Simple to install SEE PAGES 498-499 DRAWER SLIDES Available in light, meium an heavy uty Full
True Union Ball Valves
LL VLVES True Union all Valves 1/4" to 6" - PV, orzan PV, PPL Features Full Port Design Reversible PTFE Seats Easy Maintenance FPM or EPDM Seals Easily utomated Double O-Ring Stem Seals djustable Seat
ASV sturdy and robust construction. DN 10 up to DN bar (PN 10) at 20 C. DMV 755: 1,0-9,0 bar DMV 765: 0,5-9,0 bar
Pressure Reucing Valve Type DMV Type DMV Print-No. / Design Size Max. Pressure Setting Range Pressure Setting Working Pressure Back lash Operating Security Maintenance Simple inline pipe connection ASV
SCREWS, CHUCKS, RIVETS & DRILL BITS
SCREWS, CHUCKS, RIVETS & RILL BITS PROUCT CATALOG & SUBMITTALS SUPER SABER SELF SCREWS FOR LIGHT TO MEIUM GAUGE esigne for light-to meium-gauge materials, the Super Saber Point offers one-step fastening.
HYDRAULIC DISC BRAKES LB, LBS, LBV- Wet
HYRULI IS S LB, LBS, LBV- Wet PPLITION» Heavy uty machinery» Wheel drives» Material handling» Mining» gricultural machines» onveyors» oor openers and swing drives etc. GENERL Fluid type O O Temperature
Output Current Input Current Reflected Ripple. VDC VDC ma ma(typ.) ma(typ.) ma(typ.) VDC μf %
FEATURES Industrial Standard Quarter Brick Package Wide Input Range 43-101VDC & 66-1VDC Excellent Efficiency up to 92% I/O Isolation 3000VAC with Reinforced Insulation Operating Ambient Temp. Range - C
&HQWUH1DWLRQDO G ([SHUWLVH5pVHDX[
&HQWUH1DWLRQDO G ([SHUWLVH5pVHDX[ BP 107-14/16 rue Pierre SEMARD - 92323 Cedex - FRANCE (33)1 46 12 60 00 (33)1 47 35 93 98 regulateurs@georgin.com 17)375( www.georgin.com +,*+',(/(&75,&675(1*7+(/(&7520(&+$1,&$/7(03(5$785(6:,7&+(6
UCM -04A/06A RoHS compliance
Converter integrate type ultrasonic flowmeter -4A/6A RoHS compliance ULTRASONIC COMPACT METER LE The -4A/6A is the converter integrate type ultrasonic flowmeter for small flow that offers precise an stable
EMSA X - XX - SZ - CXX
date 08/21/2012 page 1 of 5 SERIES: EMS 6W DESRIPTION: -D POWER SUPPLY FETURES up to 6 W power interchangeable blades universal input (90~264 Vac) single regulated from 5~15 V over voltage and short circuit
Technical features. Cam followers
AM FOLLOWERS Technical features am followers Naella cam followers are esigne to run irectly on various types of surface such as cams, ramps an slieways. In orer to satisfy the operating conitions impose
Features. P d max. (W) V max (Vdc) I max (A)
POLY-FUSE Resettable PTs Radial Leaded > USR Series USR Series RoHS escription The USR Series radial leaded device is designed to provide overcurrent protection for US applications where space is not a
AUTO CHARGE 3 STEP AUTOMATIC BATTERY CHARGER
INSTRUCTION MANUAL FILE: IM_091-120-XX-XX-(XXX)(XX)_revA.P65 REV: A REVISED BY: PSS DATE: 07-19-13 AUTO CHARGE 3 STEP AUTOMATIC BATTERY CHARGER R MODEL #091-120-XX-XX-(XXX)(XX) 3 YEAR WARRANTY 170 Cherry
Miniature Combination Pressure/Temperature Sensors with Redundant Capability. Dr. A.D. Kurtz, A. Kane, S. Goodman, Leo Geras
Miniature Combination Pressure/Temperature Sensors with Redundant Capability January 9, 2004 Dr. A.D. Kurtz, A. Kane, S. Goodman, Leo Geras Kulite Semiconductor Products, Inc. One Willow Tree Road Leonia,
1 x 10 4 M (mean value: 5 x 10 4 M ) Measuring time: 1 min. Dissipation factors at +20) C: tan d U 250 VDC 100 V
IMA SM-N Metallize olyethylene-naphthalate (N) SM ilm Capacitors with Box ncapsulation Special eatures Size coes 1812, 2220, 2824, 4030, 5040 an 6054 with N an encapsulate Operating temperature up to 125
ISO P4 SERIES PRECISION MACHINE TOOL SPINDLE BALL BEARINGS
ISO P4 SERIES PREISION MAHINE TOOL SPINLE BALL BEARINGS MORE HOIE. ENHANE ONVENIENE AN FLEXIBILITY. 71900(E)-...-P4S Series 2(3)MM9300WI Series Number 15 /2 (3) or 25 E/3 (4) Bore O.. Tolerance: 0 to -µm
METAL DRILL BITS STRONGER THAN STEEL HAMMER DRILL BITS CHISEL METAL DRILL BITS WOOD DRILL BITS SAWS ASSORTMENTS MODULES - SHELVES
STRONGER THAN STEEL RILL 307 HSS-E IN 338 cobalt 76 79 311 HSS TIN IN 338 steel rill bit 80 81 302 HSS IN 338, groun, split point 82 85 300 HSS IN 338, stanar 86 90 300 HSS IN 338, stanar, shank reuce
DIST. AUTORIZADO. Design Features
IST. UTORIZO MX (55) 53 63 23 31 Kopper Kool rakes opper disc design for high heat dissipation xternal air and water connections ccurate control igh Temperature O-Rings New friction material lasts longer
SECTION C - MISC. PLUMBING SPECIALTIES
SETION MIS. PLUMBING SPEIALTIES Repair... 9192 Test aps & Plugs... 9394 Flexible Transition ouplings... 95 Dishwasher/Washing Machine Parts... 96 Dryer Vents... 9798 Tape... 99 Pipe Sleeving/Sand loth...
(typ.) (Range) Input Specifications Parameter Model Min. Typ. Max. Unit 12V Input Models Input Surge Voltage (100ms.
FEATURES Smallest Encapsulated 50W! Package Size 2.0 x 1.0 x 0.4 Wide 2:1 lnput Range Excellent Efficiency up to 92% Over-Temperature Protection I/O-isolation Voltage 1500VDC Remote On/Off Control Shielded
SERIES 17000, THERMOSWITCH. Temperature Controllers FEATURES APPLICATIONS DESCRIPTION PRINCIPLE OF OPERATION
SERIES 7000, 8000 THERMOSWITH ontrollers FEATURES Fast response lose control Extreme sensitivity Vibration resistance Adjustable Narrow Differential No Power Supply Required or Stainless Steel Shell APPLIATIONS
SIT timing pulleys - TOP DRIVE HTD
IT timing pulleys - TOP DIV TD TOP DIV TD pulleys have a ifferent esign from the traitional toothe pulleys. The axial grooves are esigne to allow the belt teeth to catch the pulley teeth with negligible
Fig. 1 Fig
NS Series - N hermistors for emperature Sensing Features: Electric insulation on lead wire Excellent bending resistance and easy handling due to suitable hardness of surface coating igh-accuracy of ±%
Mineral-Insulated RTD Temperature Probe According to DIN EN 60751
ata Sheet 902210 Page 1/12 Mineral-Insulated RT Temperature Probe According to IN EN 60751 For temperatures from -50 (-200) to +600 C Flexible sheath cable with vibration-resistant measuring insert As
CATALOG 2017 SERIES 1
CTLOG 2017 SRIS 1 Passon Series 1 Passon Series 1 - The new range of innovative fittings create by Passon, market eaer in esign an manufacture of reiabe fittings for poyethyene pipe systems. Passon Series
NMJ Series 5.2kVDC Isolated 1W DC-DC Converters
www.murata-ps.com NMJ Series FEATURES UL60950 recognised Wide temperature performance at full 1 watt load, 40 to 85 Single and dual outputs SIP package style 5.2kVD isolation Hi Pot Test 3V, 5V & 12V input
MICROTEMP Thermal Cutoffs: INTRODUCTION
MICROTEMP Thermal Cutoffs: INTRODUCTION Upper Limit Temperature Protection MICROTEMP thermal cutoffs from Therm-O-Disc offer an accurate, reliable solution to the need for upper limit temperature protection.
1 7 ASC_WF06A_V01 NOV
WF06A 1 ~ 1Mohm ±5%, ±1% High Power Chip Resistors Size 0603 1/4W *Contents in this sheet are subject to change without prior notice. Page 1 of 7 ASC_WF06A_V01 NOV - 2015 FEATURE 1. Small size and light
CUH Series. Cabinet Unit Heaters HEAT TRANSFER DIVISION
UH Series abinet Unit Heaters TM HEAT TRANSFER DIVISION UH SERIES ABINET UNIT HEATERS ROUGHING IN DIMENSIONS TYPIAL ARRANGEMENTS B B 1 1/" (38) REESSING FRAME B 1 1/" (38) REESSING FRAME FULLY EXPOSED
Champion Plugs / Auburn Electric Feed Throughs
Champion Plugs / Auburn Electric Feed Throughs Crown Part Number 25 CJ8 D23 D89D D9 ED-89D F-121501 F-121503 H-14-Y J12YC J99 Thread Size 18 MM 18 MM 18 MM 18 MM Crown Part Number K97F K98F RJ12YC RL87YC
STROKE BUSH SLIDE ROTARY BUSH STROKE BUSH
STROKE BUSH STROKE BUSH STRUCTURE AN AVANTAGES E- AOWABE SPEE FOR COMBINE ROTATION AN STROKE MOTION E- RATE OA AN RATE IFE E- FIT E- USE AN HANING PRECAUTIONS E- IMENSION TABE E- SRE SERIES STRUCTURE AN
NSK Ball Screws for Standard Stock
NSK Ball s for Stanar Stock ompact Series Next-generation compact ball screws offer quiet, high spee operating performance. stanar stock series assures immeiate elivery. New! Patent Pening BSS Series next-generation
Thin Film Precision Chip Resistor RT03 ~ RT50. Thin Film Precision Chip Resistor RT Series. Features. Applications. Constructions
RT Series eatures Advanced thin film technology Very tight tolerance down to ±0.01% xtremely low TR down to ±5PPM/ Wide resistance range 1ohm ~ 3Mega ohm Miniature size 0201 available RoHS compliant Applications
Housing Styles. Square Aluminum Block
Page 1 of 18 Housing Styles Square Aluminum Block AB General purpose temperature Accomodate a variety of elements Type A B Customize AB1 0.187" 0.75" AB2 0.250" 0.75" AB3 0.250" 1.25" AS Square Aluminum
MgO ORDER CODES. 1-1 Thermocouple Types CODE
MgO Insulated Thermocouples with Extension Leadwire MgO Insulated Thermocouples with Sheath Terminations A Pyromation MgO thermocouple assembly consists of a thermocouple element swaged in hardpacked standard
FP-4000 Series FLOAT LEVEL SWITCH OUTLINE MAIN APPLICATIONS STANDARD SPECIFICATION
FOR MULTIPOINT LVL LRM TTION Y ON UNIT FP- Series FLOT LVL SWIT OUTLIN The FP- series is a float level switch, which is installe through the tank nozzle on tanks an/or pits. Level alarm etection is possible
VRF II Series SURPASSING SENSITIVITY FOR THE TOUGHEST APPLICATIONS FEATURES AND BENEFITS STANDARD VS. ADVANCED UNITS
VRF II Series SURPASSING SENSITIVITY FOR THE TOUGHEST APPLICATIONS The VRF II Series uses radio frequency to detect the presence or absence of material in a vessel. It compensates for the load of the probe
ODU-MINI-SNAP. Series F - IP50 and IP68 FP-Locking Concept Keying with Halfshells. Series F
OU-MINI-SNAP Series - IP and IP68 P-Locking oncept Keying with Halfshells Series OU-MINI-SNAP Series The Push-Pull Locking Principle: P Locking roove onical Sleeve Locking ingers Outer Housing Back Nut
XT-Series & AT-Series Alternators Designed for Recreational Applications
XT-Series & AT-Series Alternators esigned for Recreational Applications 170A or 220A in a Small ase Package Up to 140A at dle Speeds Patented Smart Ready Technology (XT-Series Only) ual an ooling, igh
General Specifications
General Specifications Model RS and RN Resistance Temperature Sensor GS 06B04D01-00E GENERAL Model RS and RN Resistance Temperature Sensors (RTSs) have a platinum resistance element (Pt 100 or 50 ) in
CN0055 & CN0055B DC to DC NEGATIVE RESISTANCE SPEED CONTROL
CN0055 & CN0055B DC to DC NEGATIVE RESISTANCE SPEED CONTROL 0 M P A N Y 3879 SOUTH MAIN STREET 714-979-6491 SANTA ANA, CALIFORNIA 92707-5710 U.S.A. This manual contains information for installing and operating
FP-4000 Series FLOAT LEVEL SWITCH OUTLINE MAIN APPLICATIONS STANDARD SPECIFICATION
FOR MULTIPOINT LEVEL ALARM ETECTION BY ONE UNIT FP- Series FLOAT LEVEL SWITC OUTLINE The FP- series is a float level switch, which is installe through the tank nozzle on tanks an/or pits. Level alarm etection