Magnetic Cylinder Sensors with Mounting System
|
|
|
- Alisha Clarke
- 5 years ago
- Views:
Transcription
1 Cylinder Sensors Contents mounting system 858 mounting brackets mounting brackets mounting brackets mounting brackets 873 Know your? Find your sensor at 857
2 Cylinder Sensors The sensor for positioning monitoring on miniature grippers and short stroke s. Precise switch point for monitoring even the smallest piston movements. Series Properties PNP, NO PNP, NC NPN, NO Supply voltage U B Voltage drop U d Rated insulation voltage I e Rated operating current I e Polarity reversal protected/transposition protected/short-circuit protected Rated switching field strength I H n I Assured switching field strength I H a I Temperature drift of switch-on point of I H n I Ambient temperature T a On/off delay Degree of protection as per IEC Approval Housing material Cable Suggested mounting cable Basic information and definitions can be found on page 952, associated mounting brackets for can be found on page 860. Additional cable lengths on request Wiring diagrams NO contact PNP cable PNP connector NPN cable NPN connector V-Twin PNP connector BN BK NC contact PNP cable PNP connector WH BU 858 For more information, visit us online!
3 Cylinder Sensors Perpendicular cable exit sensor with M5 connector Perpendicular cable exit sensor with M8 connector Perpendicular cable exit V-Twin with M8 connector Perpendicular cable exit with M12 connector Perpendicular cable exit sensor with PUR cable BMF001J BMF001L BMF001R BMF001K BMF001E K-PS-C-2A-S26-00,3 K-PS-C-2A-SA2-S49-00,3 K-PS-C-2A-SA95-S75-00,3 K-PS-C-2A-S4-00,5 K-PS-C-2A-PU-02 BMF0015 BMF0013 K-PO-C-2A-SA2-S49-00,3 K-PO-C-2A-PU-02 BMF0011 BMF000Y K-NS-C-2A-SA2-S49-00,3 K-NS-C-2A-PU V DC V DC V DC V DC V DC 2.5 V 2.5 V 2.5 V 2.5 V 2.5 V 75 V DC 75 V DC 75 V DC 75 V DC 75 V DC 100 ma 100 ma 100 ma 100 ma 100 ma Yes/Yes/Yes Yes/Yes/Yes Yes/Yes/Yes Yes/Yes/Yes Yes/Yes/Yes 1.2 ka/m (15 Gauss) 1.2 ka/m (15 Gauss) 1.2 ka/m (15 Gauss) 1.2 ka/m (15 Gauss) 1.2 ka/m (15 Gauss) 2 ka/m (25 Gauss) 2 ka/m (25 Gauss) 2 ka/m (25 Gauss) 2 ka/m (25 Gauss) 2 ka/m (25 Gauss) 0.3 %/ C 0.3 %/ C 0.3 %/ C 0.3 %/ C 0.3 %/ C C C C C C 0.07 ms/ 0.07 ms 0.07 ms/ 0.07 ms 0.07 ms/ 0.07 ms 0.07 ms/ 0.07 ms 0.07 ms/ 0.07 ms IP 67 IP 67 IP 67 IP 67 IP 67 CE, culus CE, culus CE, culus CE, culus CE, culus LCP LCP LCP LCP LCP M8 connector, 3-pin M8 connector, 3-pin M8 connector, 4-pin 0.5 m PUR cable with M8 connector, 4-pin 2 m PUR cable BKS-B 25-3-PU-05 BCC M PX43T2-050 BCC M PX43T2-050 BCC M A-003-PX44T AWG M12 1 sensors mounting system Total Productive Maintenance a compact design max. 40 max. 46 special properties object detection Magnetoinductive displacement analog position measurement Accessories for magnetic sensors Suitable mounting brackets for can be found on page 860. Know your? Find your sensor at 859
4 Cylinder Sensors mounting bracket Mounting bracket for C-slot C-slot Size 10 slot C-slot C-slot Size 10 slot BAM00K8 BAM00K9 BAM00KN BAM00KP -HW-41 -HW-42 -HW-85 -HW-87 Installation advantages Cylinder type, for example SMC, Bimba, Schunk Festo, Sommer, Bosch SMC, Bimba, Schunk Festo, Sommer, Bosch Dimensions of slot Switching point adjusted in seconds! Open screw with one turn, adjust position, tighten. Switching point cannot be lost. Even if you replace the sensor, the adjusted switching point is permanently set by the mounting bracket. Can be inserted into slot from above. Mounting bracket for Bimba flat1 Dovetail Dovetail Dovetail BAM00KC BAM00KJ BAM00KF BAM01ML -HW-63 -HW-75 -HW-68 -HW-108 Installation advantages Cylinder type, for example Bimba Numatics Fabco Pancake Compact air Dimensions of slot 860 For more information, visit us online!
5 Cylinder Sensors mounting bracket C-slot C-slot Size 10 slot T-slot Round Cylinder Tie rod BAM01K6 BAM01K7 BAM00KA BAM01E2 BAM00KH -HW-100 -HW-102 -HW-43 -HW-93 -HW-74 SMC, Bimba, Schunk Festo, Sommer, Bosch Festo, Bosch, SMC Without slot, round mm with tube cuff Phd sensors mounting system Total Productive Maintenance a compact design special properties object detection Recommended accessories (please order separately) Magnetoinductive displacement analog position measurement Accessories for magnetic sensors Special accessories for magnetic sensors, such as installation tools, cable clips, or tube cuffs, can be found in this catalog on page 910. Know your? Find your sensor at 861
6 Cylinder Sensors The universal sensor for position monitoring on small grippers and s. A variety of mounting brackets enables adapting to virtually every miniaturized pneumatic actuator on the market. Series Properties PNP, NO PNP, NC NPN, NO NPN, NC Supply voltage U S Voltage drop U d Rated insulation voltage U i Rated operating current I e Polarity reversal protected/transposition protected/short-circuit protected Rated switching field strength I H n I Assured switching field strength I H a I Hysteresis of I H n I Temperature drift of switch-on point of I H n I On/off delay Ambient temperature T a Degree of protection as per IEC Approval Housing material Cable Suggested mating cable Basic information and definitions can be found on page 952, associated mounting brackets for can be found on page 864. Additional cable lengths on request Wiring diagrams NO PNP cable PNP connector NPN cable NPN connector V-Twin PNP connector BN BK NC PNP cable PNP connector NPN cable NPN connector WH BU 862 For more information, visit us online!
7 Cylinder Sensors Cylinder sensor for all common s with M5 connector Cylinder sensor for all common s with M8 connector V-Twin variant for all common s with M8 connector V-Twin variant for all common s with M12 connector Cylinder sensor for all common s with direct PUR cable BMF003Z BMF0043 BMF004F BMF004E BMF003U K-PS-C-2A-S26-00,3 K-PS-C-2A-SA2-S49-00,3 K-PS-C-2A-SA95-S75-00,3 K-PS-C-2A-SA95-S4-00,3 K-PS-C-2A-PU-02 BMF0039 BMF0036 K-PO-C-2A-SA2-S49-00,3 K-PO-C-2A-PU-02 BMF0033 BMF0034 BMF0031 K-NS-C-2A-S26-00,3 K-NS-C-2A-SA2-S49-00,3 K-NS-C-2A-PU-02 BMF002Y BMF002U K-NO-C-2A-SA2-S49-00,3 K-NO-C-2A-PU V DC V DC V DC V DC V DC 2 V 2 V 2 V 2 V 2 V 75 V DC 75 V DC 75 V DC 75 V DC 75 V DC 100 ma 100 ma 100 ma 100 ma 100 ma Yes/Yes/Yes Yes/Yes/Yes Yes/Yes/Yes Yes/Yes/Yes Yes/Yes/Yes 1.2 ka/m (15 Gauss) 1.2 ka/m (15 Gauss) 1.2 ka/m (15 Gauss) 1.2 ka/m (15 Gauss) 1.2 ka/m (15 Gauss) 2 ka/m (25 Gauss) 2 ka/m (25 Gauss) 2 ka/m (25 Gauss) 2 ka/m (25 Gauss) 2 ka/m (25 Gauss) 45% 45% 45% 45% 45% 0.3 %/ C 0.3 %/ C 0.3 %/ C 0.3 %/ C 0.3 %/ C 0.07 ms/ 0.07 ms 0.07 ms/ 0.07 ms 0.07 ms/ 0.07 ms 0.07 ms/ 0.07 ms 0.07 ms/ 0.07 ms C C C C C IP 67 IP 67 IP 67 IP 67 IP 67 CE, culus CE, culus CE, culus CE, culus CE, culus LCP LCP LCP LCP LCP M5 connector, 3-pin M8 connector, 3-pin M8 connector, 4-pin M12 connector, 4-pin 2 m PUR cable BKS-B 25-3-PU-05 BCC M PX43T2-050 BCC M PX43T2-050 BCC M A-003-PX44T AWG sensors mounting system Total Productive Maintenance a compact design special properties object detection Magnetoinductive displacement analog position measurement Accessories for magnetic sensors Suitable mounting brackets for can be found on page 864 Know your? Find your sensor at 863
8 Cylinder Sensors mounting bracket Mounting bracket for C-slot C-slot Size 10 slot C-slot C-slot Size 10 slot BAM00KZ BAM00L0 BAM01F0 BAM00L1 -HW-28 -HW-30 -HW-97 -HW-31 Installation advantages Cylinder type, for example SMC, Bimba, Schunk Festo, Sommer, Bosch SMC, Bimba, Schunk Festo, Sommer, Bosch Dimensions of slot Mounting bracket for Round Cylinder Round Dovetail Trapezoidal slot BAM00L3 BAM00L7 BAM01K9 BAM00LF -HW-34 -HW-59 -HW-101 -HW-80 Installation advantages Cylinder type, for example Without slot, round mm with tube cuff Without slot, round Ø mm with tube cuff Bosch, Parker, Norgren Bosch Dimensions of slot min M For more information, visit us online!
9 Cylinder Sensors mounting bracket C-slot, large T-slot T-slot T-slot T-slot BAM00LA BAM00L4 BAM00L2 BAM00L6 BAM00L8 -HW-62 -HW-40 -HW-33 -HW-51 -HW-60 Numatics, Norgren Festo, Bosch, SMC Festo, Bosch, SMC SMC A, B SMC A and B for expanding the -HW M2 Ø6.5...Ø7.2 Dovetail Dovetail U-slot BAM00L5 BAM00LE BAM01K4 -HW-44 -HW-69 -HW-103 Festo, Bosch, Numatics, Hoerbiger - Origa Ø Fabco pancake SMC CP M Type A Type B Type A Type B Type A Type B Sensor disappears in the slot. Expansion of the HW-51 with HW-60: for fastening the sensor next to the slot. This lets you attach two sensors to the even when space is tight. For example, 2 HW HW-60 or 2 HW HW-60 Switching point adjusted in seconds! Open screw with one turn, adjust position, tighten. Switching point cannot be lost. Even if you replace the sensor, the adjusted switching point is permanently set by the mounting bracket. Can be inserted into slot from above. Recommended accessories (please order separately) sensors mounting system Total Productive Maintenance a compact design special properties object detection Magnetoinductive displacement analog position measurement Accessories for magnetic sensors 7.3 Ø2.8 6 Special accessories for magnetic sensors, such as installation tools, cable clips, or tube cuffs, can be found in this catalog on page 910. Know your? Find your sensor at 865
10 Cylinder Sensors The universal sensor for position monitoring on large actuators Series Properties Temperature load curve PNP, NO PNP, NC NPN, NO NPN, NC Supply voltage U B Voltage drop U d Rated insulation voltage U i Rated operating current I e No-load supply current I 0 max. Polarity reversal protected/transposition protected/short-circuit protected Rated switching field strength I H n I Assured switching field strength I H a I Hysteresis of I H n I Temperature drift of switch-on point of I H n I On/off delay Ambient temperature T a Degree of protection as per IEC Approval Material Housing Cable Suggested mating cable Basic information and definitions can be found on page 952, associated mounting brackets for can be found on page 868. Additional cable lengths on request Wiring diagrams NO PNP cable PNP connector NPN cable NPN connector V-Twin PNP connector BN BK NC PNP cable PNP connector NPN cable NPN connector WH BU 866 For more information, visit us online!
11 Cylinder Sensors Universal position monitoring with M8 connector Universal position monitoring with M8 connector Universal position monitoring with M12 connector Universal position monitoring with M12 connector Universal position monitoring with PUR cable BMF005L BMF0060 BMF0058 BMF005Z BMF0056 K-PS-C-2-SA2-S49-00,3 K-PS-C-2-SA95-S75-00,3 K-PS-C-2-S4-00,2 K-PS-C-2-SA95-S4-00,3 K-PS-C-2-PU-02 BMF0055 BMF0052 K-PO-C-2-SA2-S49-00,3 K-PO-C-2-PU-02 BMF0050 BMF004W K-NS-C-2-SA2-S49-00,3 K-NS-C-2-PU-02 BMF004U BMF004P K-NO-C-2-SA2-S49-00,3 K-NO-C-2-PU V DC V DC V DC V DC V DC 3.1 V 3.1 V 2 V 3.1 V 3.1 V 75 V DC 75 V DC 75 V DC 75 V DC 75 V DC 200 ma 200 ma 100 ma 200 ma 200 ma 30 ma 30 ma 5 ma 30 ma 30 ma Yes/Yes/Yes Yes/Yes Yes/Yes Yes/Yes Yes/Yes 1.2 ka/m (15 Gauss) 1.2 ka/m (15 Gauss) 1.2 ka/m (15 Gauss) 1.2 ka/m (15 Gauss) 1.2 ka/m (15 Gauss) 2 ka/m (25 Gauss) 2 ka/m (25 Gauss) 2 ka/m (25 Gauss) 2 ka/m (25 Gauss) 2 ka/m (25 Gauss) 45% 45% 45% 45% 45% 0.3 %/ C 0.3 %/ C 0.3 %/ C 0.3 %/ C 0.3 %/ C 0.05 ms/ 0.05 ms 0.05 ms 0.07 ms 0.05 ms 0.05 ms C C C C C IP 67 IP 67 IP 67 IP 67 IP 67 CE, culus CE, culus CE, culus CE, culus CE, culus LCP LCP LCP LCP LCP M8 connector, 3-pin M8 connector, 4-pin 0.2 m PUR cable with M12 connector, 4-pin M12 connector, 4-pin 2 m PUR cable BCC M PX43T2-050 BCC M PX43T2-050 BCC M A-003-PX44T2-050 BCC M A-003-PX44T AWG sensors mounting system Total Productive Maintenance a compact design special properties max. 40 object detection Magnetoinductive displacement analog position measurement Accessories for magnetic sensors Suitable mounting brackets for can be found on page 868 Know your? Find your sensor at 867
12 Cylinder Sensors mounting bracket Mounting bracket for C-slot, large C-slot, large T-slot T-slot BAM00LW BAM01C4 BAM00LH BAM00LJ -HW-32 -HW-92 -HW-17 -HW-20 Installation advantages Cylinder type, for example Norgren Numatics Festo, SMC, Bosch Festo, SMC, Bosch Dimensions of slot M3x5(2x) Mounting bracket for T-slot T-slot T-slot T-slot BAM00M6 BAM00M7 BAM0017 BAM00LN -HW-52 -HW-53 -HW-91 -HW-23 Installation advantages Cylinder type, for example Dimensions of slot SMC PHD Parker, 3MA, 4MA Festo, SMC, Bosch 868 For more information, visit us online!
13 Cylinder Sensors mounting bracket T-slot T-slot L-slot L-slot T-slot BAM01EZ BAM00LM BAM00MO BAM00M9 BAM00M5 -HW-98 -HW-22 -HW-37 -HW-64 -HW-50 Festo, SMC, Bosch Festo, SMC, Bosch Parker, SST, ER Bosch sensors mounting system Total Productive Maintenance T-slot T-slot Round Tie rod Tie rod BAM00LT BAM01EY BAM00LP BAM00MC BAM00ME -HW-26 -HW-99 -HW-24 -HW-70 -HW-71 a compact design special properties SMC SMC Round Ø mm Type A Type B Type A Type B object detection Magnetoinductive displacement analog position measurement Type A Type A M3x6-A2 Ø8.0 M3x10(2X) M3x6-A2 Ø Accessories for magnetic sensors M3x10 (2X) 4.8 Type B Type B Know your? Find your sensor at 869
14 Cylinder Sensors mounting bracket Mounting bracket for Tie rod Profile/tie rod Profile/tie rod Dovetail BAM00MF BAM00LL BAM00LL BAM00LY -HW-72 -HW-21 -HW-21 -HW-35 Installation advantages Cylinder type, for example Dimensions of slot For profile/tie rod s 6.5 mm in conjunction with BAM00KY For profile/tie rod s mm in conjunction with BAM00KT Tol-o-matic Mounting bracket for Dovetail Dovetail Trapezoidal guide BAM01K8 BAM00LR BAM00LU -HW-106 -HW-25 -HW-27 Installation advantages T-slot Cylinder type, for example Bosch Dimensions of slot 8.9 M3 1.5 M For more information, visit us online! 4.90
15 Cylinder Sensors mounting bracket Dovetail Dovetail Dovetail Dovetail Dovetail BAM00LZ BAM00M1 BAM00M2 BAM00M3 -HW-36 -HW-38 -HW-39 -HW-45 -HW-46 Numatics De-Sta-Co Compact air Norgren Norgren O11.6 sensors O7 mounting system Total Productive Maintenance Can be inserted in slot from above. Quick and time-saving. a compact design Switching point adjusted in seconds! Open screw with one turn, adjust position, tighten. Switching point cannot be lost. Even if you replace the sensor, the adjusted switching point is permanently set by the mounting bracket. special properties object detection Recommended accessories (please order separately) Magnetoinductive displacement analog position measurement Accessories for magnetic sensors Special accessories for magnetic sensors, such as installation tools, cable clips, or tube cuffs, can be found in this catalog on page 910. Know your? Find your sensor at 871
16 Cylinder Sensors Integral swinging bracket arm for self adjustment across a wide range of diameters. Series Properties For s with tie rod, DUO rail, round and profile with M8 connector For s with tie rod, DUO rail, round and profile with direct PUR cable PNP, NO BMF0029 BMF0026 K-PS-C-2-S49 K-PS-C-2-PU-02 NPN, NO BMF0025 BMF0023 K-NS-C-2-S49 K-NS-C-2-PU-02 Supply voltage U B V DC V DC Voltage drop U d 3.1 V 3.1 V Rated insulation voltage U i 75 V DC 75 V DC Rated operating current I e 200 ma 200 ma No-load supply current I 0 max. 30 ma 30 ma Polarity reversal/short-circuit protected Yes/Yes Yes/Yes Rated switching field strength I H n I 1.2 ka/m (15 Gauss) 1.2 ka/m (15 Gauss) Assured switching field strength I H a I 2 ka/m (25 Gauss) 2 ka/m (25 Gauss) Hysteresis of I H n I 45% 45% Temperature drift of switch-on point of I H n I 0.3 %/ C 0.3 %/ C Turn-on delay 0.05 ms 0.05 ms Turn-off delay 0.05 ms 0.05 ms Ambient temperature T a C C Degree of protection as per IEC IP 67 IP 67 Approval CE, culus CE Housing material PBT (fiberglass reinforced) PBT (fiberglass reinforced) Cable/suggested mating cable BCC M PX43T AWG Basic information and definitions can be found on page 952, associated mounting brackets for can be found on page 873. Additional cable lengths on request Temperature load curve Wiring diagrams NO PNP cable PNP connector NPN cable NPN connector 872 For more information, visit us online!
17 Cylinder Sensors mounting bracket Mounting bracket for Tie rod Profile/tie rod Profile/tie rod Round BAM00KY BAM00KT BAM00KU BAM00KW -HW-8 -HW-10 -HW-10-E -HW-11 Cylinder type For pneumatic s with tie rod. Any piston diameter, tie rod diameter up to 6.5 mm. Pneumatic with DUO rail (Festo), any piston diameter For pneumatic s with tie rod. Any piston diameter, tie rod diameter up to 17 mm. For pneumatic with tie rod integrated in housing (profile). Any piston diameter, profile width up to 17 mm. Stainless steel For pneumatic s with tie rod. Any piston diameter, tie rod diameter up to 17 mm. For pneumatic with tie rod integrated in housing (profile). Any piston diameter, profile width up to 17 mm. For pneumatic s without tie rod/rail. Piston diameter mm. Mounting bracket usable only with hose clamps. sensors Cylinder 303 Stainless steel mounting system Total Productive Maintenance a compact design special properties object detection Recommended accessories (please order separately) Magnetoinductive displacement analog position measurement Accessories for magnetic sensors Special accessories for magnetic sensors, such as installation tools, cable clips, or tube cuffs, can be found in this catalog on page 910. Know your? Find your sensor at 873
Sensors for Pneumatic Cylinders. Product overview for BMF magnetic field sensors
Sensors for Pneumatic Cylinders Product overview for BMF magnetic field sensors Sensors for Pneumatic Cylinders Magnetic field sensors Increase function reliability and uptime for your machines Better
Normally-open. Normally-open
Series BMF 07 Series BMF 07 BMF 07 PNP Normally-open BMF 07K-PS-C--S49- BMF 07K-PS-C-- Non-contact, wear-free piston sensing Insensitive to contamination Piston sensed through the cylinder wall Can be
t Technical Cylinder & Valve Sensors Cylinder & Cylinder & Valve Valve Sensors Contents Sensors 5.1 Cylinder & Valve Sensors
Cylinder & Cylinder & Cylinder & Cylinder sensors are used to provide end-ofstroke and position detection for hydraulic and pneumatic cylinder applications. Hydraulic cylinder walls are typically made
Powerful, durable and quick to mount. Magnetic and cylinder sensors from ifm electronic.
Powerful, durable and quick to mount. Magnetic and cylinder sensors from ifm electronic. Magnetic sensors, cylinder sensors www.ifm.com/gb/cylindersensors fluid sensors and diagnostic systems position
Today Numatics is proud to be a part of the Industrial Automation Division of Emerson Electric Co.
Numatics, Inc. is a leading manufacturer of pneumatic products and motion control products. Our broad spectrum of standard, custom developed products and application components, have made a significant
Electronic pressure switch with two switching outputs
Electronic pressure switch with two switching outputs RE 30278/04.14 Replaces: 03.06 RE 30275 1/6 Type HEDE 10 /2/ Component series 2X tb0002 Table of contents Contents Page Features 1 Ordering code 2
Max. oil content of compressed air Shock resistance max. (XYZ direction) Vibration resistance (XYZ direction) Quiescent current consumption
Sensor technologies Pressure sensors Operating pressure: - - 2 bar electronic Output signal digital: 2 outputs - output IO-Link electr. connection: Plug, M2x, 4-pin 233 Certificates Measurement Display
Max. oil content of compressed air Shock resistance max. (XYZ direction) Vibration resistance (XYZ direction) Quiescent current consumption
Operating pressure: -4.5-74 psi electronic Output signal digital: 2 outputs - output IO-Link electr. connection: Plug, M2x, 4-pin 233 Certificates Measurement Display Units displayed Switching logic Ambient
Reed, Electronic. MOVEMENT > Series CST-CSV-CSH proximity switches GENERAL DATA
> Series CST-CSV-CSH proximity switches Series CST - CSV and CSH magnetic proximity switches Reed, Electronic» Designed to fit into the grooves provided in the profile barrel of the cylinder» The three
MGX. 2-jaw parallel self-centering pneumatic gripper series MGX. Parallel grippers. Pinze parallele MGX
Pinze parallele MGX Parallel grippers MGX 2-jaw parallel self-centering pneumatic gripper series MGX Flat profile. Robust guide. High gripping force. Small weight and dimensions. High dimensional accuracy.
Reed, Electronic. MOVEMENT > Proximity switches Series CST-CSV-CSH GENERAL DATA
> Proximity switches Series CST-CSV-CSH Magnetic proximity switches Series CST - CSV and CSH Reed, Electronic»» Designed to fit into the cylinder profile barrel»» The three Series CST - CSV - CSH are suitable
magnetic sensors cylinder sensors 1200 cylinder sensors for 4mm round groove for festo or SMC cylinders
cylinder sensors 1200 design 10 x 16 x 19.5mm Ø3.6 x 20.5mm Ø4.0 x 20.5mm C-groove cylinder sensor surface middle area temperature range up to +130 C wear-free and shock resistant because of fully electronic
Reed, Electronic. MOVEMENT > Series CST-CSV-CSH proximity switches GENERAL DATA
> Series CST-CSV-CSH proximity switches Series CST - CSV and CSH magnetic proximity switches Reed, Electronic»» Designed to fit into the grooves provided in the profile barrel of the cylinder»» The three
Electronic pressure switch with integrated analogue output
Electronic pressure switch with integrated analogue output RE 30276/03.1 Replaces: 03.06 RE 30275 1/6 Type HEDE 10 /1/ Component series 2X tb0002 Table of contents Contents Page Features 1 Ordering code
WBG Series Wide Body Grippers
WBG Series Wide Body Grippers www.numatics.com Table of Contents WBG Series Parallel Grippers Features and Benefits 3 How To Order 3 WBGS 60 Dimensions & Technical 4 WBGS 90 Dimensions & Technical 5 WBGL
WG Series Double Guided Wedge Grippers
WG Series Grippers www.numatics.com Table of Contents WG Series Parallel Gripper Features & Benefits 3 How To Order 4 WGS50 Dimensions 5 WGS50 Technical Specifications 5 WGL50 & WGS90 Dimensions 6 WGL50
AG Series Angular Grippers
AG Series Angular Grippers www.numatics.com Table of Contents AG Series Angular Grippers Features and Benefits 3 How to Order 4 Dimensions 5 Specifications and Load Ratings 6 Sensing Part Numbers 7 Quick
PMS - PKS / PMW - PKW series
features / series warranty warranty Innovative housing (double enclosure) Cutting oils resistant (for machines tool) Immersion proof (sealing IP 67/68) High frequency switching Complementary output (NO+NC),
Proximity switches and switch brackets
Proximity switches and switch brackets MGE.0 - Proximity switches and switch brackets 5 7 SH /S (p. -) SH /U (p. -) SH /S, SH /ST (p. -) SH /S-H (p. -5) 9 SH /U (p. -) SH /U-H (p. -7) Proximity switch
RE-CIRCULATING BALL BEARING LINEAR GUIDES (SERIES LL)
LL RE-CIRCULATING BALL BEARING (SERIES LL) Patented re-circulating ball bearing guide system. Excellent price / performance ratio. Several T-nut mounting options. Optional mounting accessory kits are available.
Electronic pressure switch. Type HEDE 10. Contents. Features. RE Edition: Replaces:
Electronic pressure switch Type HEDE 10 RE 30277 Edition: 2017-02 Replaces: 2016-06 Component series 3X Maximum operating pressure 600 bar Features Suitable for measuring pressures in hydraulic systems
Pneumatic cylinders, piston-ø 8 25 mm Single acting DIN ISO 6432
Pneumatic cylinders, piston-ø 25 mm Single acting DIN ISO 6432 Technical data for series HE Order code HE-16-025 Series Piston-Ø Stroke length (mm) Design and function Single acting pneumatic cylinder
Cylinder Series. Compact series) Pee Wee (O,P,Q series)
Sensor Selection for Numatics Cylinders Dovetail Extruded- Dovetail B, F KLDT-1 A3555 Compact series) KLDT-1 A3555 Short Stroke KLDT-1 A3555 Rotary Actuator KLDT-1 A3555 Pee Wee (O,P,Q series) KLDT-1 A3555
Compact cylinders series NYD Double acting with magnetic piston, ISO M5 to G1/8 Piston Ø 20 to 100 mm
Compact cylinders series NYD Double acting with magnetic piston, ISO 21287 M5 to G1/8 Piston Ø 20 to 100 mm 200, 210 220 600, 610 620 Order code NYD-032-125-210 High force cylinder series NYDK and multiple
UNIVERSAL MAGNETIC FIELD SENSORS FOR PNEUMATIC CYLINDERS. Sense it! Connect it! Bus it! Solve it!
UNIVERSAL MAGNETIC FIELD SENSORS FOR PNEUMATIC CYLINDERS Sense it! Connect it! Bus it! Solve it! Universal magnetic field sensors for pneumatic cylinders The universal magnetic field sensors BIM-UNT and
ISO/VDMA Series ISO 6431 and VDMA Cylinder Line
ISO/VDMA Series ISO 6431 and VDMA 24562 Cylinder Line www.asco.com Table of Contents ISO/VDMA Series Features and Benefits 2 How to Order 3 Technical Information 4 Dimensions Tie-Rod Version 5 Mounting
CD34CNFLFxxx. Capacitive sensor, Foreground Suppression. Main features. Main functions. Description
Capacitive sensor, Foreground Suppression Main features Compact housing Supply voltage: 10 to 30 VDC Output: 100 ma, NPN or PNP preset Make or break switching function LED indication for output and power
fluid technology temperature sensors 1600 intelligent temperature sensor membrane keyboard, USB opto interface
fluid technology temperature sensors 1600 1 dimensions Ø38 x 118mm temperature operating range -40 to +300 C temperature measuring range from -40 to +300 C M12 socket for PT100 resistance thermometer analog
Linear actuators DFPI
Linear actuators DFPI Linear actuators DFPI Key features General information Linear actuator for actuating process valves such as gate valves and shut-off valves in process automation systems Linear actuator
GRB. long life Compact Angular gripper SHIPS IN 1-2 days. Major Benefits. Industry Uses
long life Compact Angular gripper SHIPS IN 1-2 days hardened steel jaws have robust design and include dowel holes for precise tooling location steel cover, jaw design, and tight jaw slots minimize external
PLK/PLKD SERIES PLK/PLKD PIN LOCATING CLAMPS
PLK/PLKD SERIES PLK/PLKD PIN LOCATING CLAMPS Ideal for part clamping in weld areas Disappearing Pin Weld Field Immune Switch PLK03 PLK/PLKD PIN LOCATING CLAMPS PATENT PENDING Major Benefits Completely
Magnetic Field Sensor for pneumatic cylinders BIM-UNT-AP6X-0.3-RS4
For T-groove cylinders without mounting accessories Optional accessories for mounting on other cylindrical housings. One-hand mounting possible Fine adjustment tool and stopper directly mountable on the
PNEUMATIC 180 ANGULAR GRIPPER
PNEUMATIC 180 ANGULAR GRIPPER Major Benefits Jaws rotate completely clear of work area eliminating an otherwise required axis of travel Three standard jaw rotations available: 60, 90, and 180 One piece
UNIVERSAL MAGNETIC FIELD SENSORS FOR PNEUMATIC CYLINDERS. Sense it! Connect it! Bus it! Solve it!
UNIVERSAL MAGNETIC FIELD SENSORS FOR PNEUMATIC CYLINDERS Sense it! Connect it! Bus it! Solve it! UNIVERSAL MAGNETIC FIELD SENSORS FOR PNEUMATIC CYLINDE The position detection of piston on all standard
Solid State Electronic Pressure Switch with Integral LED Display Model PSD-10
Solid State Electronic Pressure Switch with Integral LED Display Model PSD-10 Electronic Pressure Measurement WIKA Datasheet PSD-10 Applications Hydraulics and pneumatics Filter monitoring Pump control
PBS Series Power Block Slide
PBS Series Power Block Slide www.numatics.com Table of Contents PBS Series Features and Benefits 3 How To Order 4 Technical Specifications 4 Dimensions 5 Quick Disconnect Cables 6 Switch Information 6-7
Proportional pressure regulators MPPES
Product range overview Function Type Circuit symbol Design Pneumatic connection 1 Proportional pressure regulators With proportional solenoid MPPES Directly actuated valve Nominal size pressurise/ exhaust
Electronic Pressure Switch EDS 3000
Description: The EDS 3000 is a compact, electronic pressure switch with integral digital display. The unit can have one or two switching outputs, and there is the option of an additional analogue output
ISO/VDMA Series ISO 6431 and VDMA Cylinder Line ISO 6431 and VDMA Cylinder Line w w w. n u m a t i c s. c o m
ISO/VDMA Series ISO 6431 and VDMA 24562 Line Cylinder Line ISO 6431 andcylinder VDMA 24562 w w w. n u m a t i c s. c o m Table of Contents ISO/VDMA Series Features and Benefits 3 How to Order 4 Technical
2 x 3/2 Way Valves Series S10
x / Way Valves Series S0 G/ and -In Connections OD 6 mm Actuation systems: Pneumatic Electrical pilot actuated Versions: x normally closed x normally open x normally closed and x normally open With external
-U- Type discontinued. -H- Note. Available up until Angle grippers HGW Key features. 2 Internet:
Key features At a glance Double-acting piston drive Self-centring Variable gripping action: External/internal gripping Versatility thanks to externally adaptable gripper fingers Wide range of options for
Pneumatic cylinders, piston-ø mm Double acting with magnetic piston DIN ISO 15552
Pneumatic cylinders, piston-ø 32 100 mm Double acting with magnetic piston DIN ISO 15552 Technical data for series SL 050 450 Order code SL-032-0250-050 Series Piston-Ø Stroke length (mm) Type of cylinder
MAGNETO-INDUCTIVE POSITION DETECTORS
MAGNETO-INDUCTIVE POSITION DETECTORS Series 88 Type 2 wires APPLICATION This four-wire proximity sensor will monitor stroke end and intermediate positions of pneumatic cylinders equipped with built-in
onlinecomponents.com
s M5 x 0,5 / Accessories s M5 x 0,5 / 15,5 7,5 8,1 8,5 6 M5 x 0,5 5,5 3 ESW 05SP00 3 pin 2 m PUR ESW 05SP0500 3 pin 5 m PUR ESW 05S ESW 08S / ES 8A 6 M5 x 0,5 8 25,4 29,5 ESW 08SH00 3 pin 2 m PUR ESW 08SH0500
Table of Contents ISO
Table of Contents ISO 6432...3-12 Features and Benefits...3 How to Order....4 Dimensions Single Rod End, Single and Double Acting...5 Single and Double Acting-Double Rod...6 Mounting Accessories...7-10
Radial grippers DHRS
Key features At a glance General information Flexible range of applications Lateral gripper jaw support for high torque loads Self-centring Gripper jaw centring options Max. repetition accuracy Gripping
Linear drives DGC-HD, with heavy-duty guide
Linear drives DGC Key features At a glance New heavy-duty design for: Maximum loads and torques thanks to duo rail guide Long service life Ideal as a basic axis for linear gantries and cantilever axes
Linear drives DGC-K. Festo core product range Covers 80% of your automation tasks
q/w Worldwide: Superb: Easy: Festo core product range Covers 80% of your automation tasks Always in stock Festo quality at an attractive price Reduces procurement and storing complexity qready for dispatch
Magnetic and Hydraulic-Magnetic Circuit Breaker 8340-G V
Description Single and two pole magnetic circuit breakers with trip-free mechanism and push/pull on/off manual actuation. A choice of fast magnetic only or hydraulically delayed switching characteristics
EQ Series OEM Aluminum NFPA Interchangeable Cylinder Line
Series OEM Aluminum NFPA Interchangeable Cylinder Line www.numatics.com Table of Contents EQ Series Features and Benefits 3 Standard Mounts 4 How to Order 5 Rod Ends 6 Dimensions 7 How to Order - EQ Series
Index INDEX. Product overview Technical data... 5 RHL Sliders for RHL80: V100, V250 & V RHL
LINEAR UNIT RHL Svanemærket tryksag 541-713 INDEX Index Product overview... 4 Technical data... 5 RHL... 6 Sliders for RHL: V1, V25 & V5... 7 RHL11... 8 Sliders for RHL11: V2 & V5... 9 Mounting Plates...
CPLab / CP Factory. Application module magazine. Data sheets
CPLab / CP Factory Application module magazine Data sheets Data sheet: Push-in fitting QSM-M5-4 #153304 Size Mini Nominal size 2.2 mm Type of seal on screw-in stud Sealing ring Container size 10 Design
XXV18B1PAL2 Ultrasonic sensor - M18 metal - Sn 50mm - PNP NO - cable 2m
Characteristics Ultrasonic sensor - M18 metal - Sn 50mm - PNP NO - cable 2m Product availability : Stock - Normally stocked in distribution facility Price* : 98.00 USD Main Range of product Sensor type
RE-CIRCULATING BALL BEARING LINEAR GUIDES (SERIES LP)
RE-CIRCULATING BALL BEARING (SERIES ) Patented re-circulating ball bearing guide system. Several T-nut mounting options. Optional mounting accessory kits are available. More than one carrier per rail can
Climax Pneumatics. ISO 6432 Interchangeable Cylinders Easley, South Carolina
Climax Pneumatics ISO 6432 Interchangeable Cylinders 1-800-732-8704 Easley, South Carolina End Caps Anodized Aluminum Tube Stainless Steel AISI 304 Piston Seals Rod Bushing Brass ø 8-10 - 12 Polyurethane
Parallel grippers HGPL-B, heavy-duty with long stroke
Key features At a glance Sturdy The T-slot in combination with the long guide length allows for high forces and torques Space-saving Two parallel and opposing pistons move the gripper jaws directly and
Climax Pneumatics Cnomo NFE Cylinders
Climax Pneumatics Cnomo NFE 49001 Cylinders End Caps Tube Tie Rods Seals Piston Rod Diecast Aluminum Anodized Aluminum Zinc Coated or Stainless Steel Polyurethane Chromium Coated Steel Working Pressure
pneumatic swing clamps
pneumatic swing clamps Sizing and Application Chart Series Standard Features Bore Clamping Clamping Force [lbf.]n 90 Series [0.86] 22 [0.] 13 [34] 0 Arm rotates at the top of stroke Shielded rod protects
-V- New. Linear drives DGC Features. 2 Internet:
Linear drives DGC Features At a glance Without external guide, for simple drive functions Compact fitting length relative to stroke Fully interchangeable with the linear drive DGP Easy assembly and installation
PRODUCT CATALOG COMPACT HYDRAULIC SPACE-SAVING, LONG-LASTING DEVICES FOR DEMANDING DESIGN REQUIREMENTS.
PRODUCT CATALOG COMPACT HYDRAULIC SPACE-SAVING, LONG-LASTING DEVICES FOR DEMANDING DESIGN REQUIREMENTS. TABLE OF CONTENTS 3 Compact Hydraulic 4 Product Features 4 Features and Benefits 5 How to Order 6
Sensors for Fluid Technology.... refi ned quality for optimal products
Sensors for Fluid Technology... refi ned quality for optimal products BMF/BIL Sensors for Pneumatic Cylinders BAW Inductive Distance Sensors Valve position feedback, soft stopping Magneto-inductive Position
Inductive Special Properties
Contents pressue high pressure NAMUR magnetic weld immune temperature extended Special Properties sensors special mechanical and/or electrical properties. Use under extremely harsh conditions Resistant
Electric Mini Slides MSC-EL
Electric Mini Slides MSC-EL R10EN 2604 (11.08) The Drive & Control Company Electric Mini Slides, MSC-EL R10EN 2604 (11.08) Mini Slides, MSC-EL Product Description 4 Selection Guide 6 Maximum thrust 6
Three-point grippers DHDS
Key features At a glance General information Flexible range of applications Resilient and precise T slot guide of the gripper jaws High gripping forces with compact dimensions Gripper jaw centring options
FDXS Series. required at temperatures below 0 C (32 F) None required, or ISO VG32. 0 ~ 5mm Standard with rubber bumper (both sides)
Bulletin FDXS-09 Features 1. Magnetic piston is standard in all sizes. 2. Non-rotating design enables precision positioning. ng. 3. Compact design saves space. 4. Suitable for multi-axis assemblies and
With Integral Filter and Silencer, Optional Vacuum Switch, Type VADM- Solenoid-Actuated Vacuum Generator with integral filter and silencer Type VADM-
Features and Benefits Solenoid-Actuated Vacuum Generators Types VADM-... / VADMI-... l Integral Filter, Silencer, Manual Override l Integral Solenoid Valve for Controlling Air Supply l Vacuum Range up
Brochure. Compact Cylinders. Setting a new standard for: Quality Reliability Value Global Compatibility
Brochure Compact Cylinders Setting a new standard for: Quality Reliability Value Global Compatibility Actuators - Compact Cylinders How to Order MODEL MACQ - Compact Cylinder MAGNET Blank - No Magnet S
Universal Magnetic Field Sensors
Universal Magnetic Field Sensors www.turck.com The BIM-UNT, a universal magnetic field sensor, is the latest addition to the inductive-magnetic family of switches by TURCK. It has the ability to detect
Assembly. 1 Compact version with valve plug 2 Short tube version with cable 3 Compact version with M12 plug 4 Short tube version with M12 plug
Vibration Limit Switch Features Limit switch for liquids External function test with test magnet Onsite function check possible thanks to LED indication Large selection of process connections for hassle-free
E Series Economic Tie-Rod Cylinder Line
Series Economic Tie-Rod Cylinder Line www.numatics.com Table of Contents E Series Features and Benefits 3 How to Order 4 Basic E-Series Cylinders 5 Cushioned Cylinders 5 Basic E-Series Dimensions 5 E-Series
MAGNETIC SENSORS FOR CYLINDERS
MAGNETIC SENSORS FOR CYLINDERS Magnetic sensors REED type with cable Magnetic sensors REED type for connector Magnetic sensors HALL effect with cable Magnetic sensors HALL effect for connector Miniaturized
Innovation in pressure sensing Simple-to-set compact electronic pressure switches. Pressure switches
Innovation in pressure sensing Simple-to-set compact electronic es Pressure switches PK es with mechanical adjustment dials provide simple setup Extremely durable The PK features a 316 stainless steel
E Series Economic Tie-Rod Cylinder Line
E Series Economic Tie-Rod Cylinder Line w w w. n u m a t i c s. c o m Table of Contents E Series Features and Benefits 3 How to Order 4 Basic E-Series Cylinders 5 Cushioned Cylinders 5 Basic E-Series Dimensions
Linear/swivel clamp CLR
Key features Functional description The linear/swivel clamp CLR is used for all types of clamping. Through the combination of the linear and swivel motion of the piston rod, it is possible to insert and
Any reproduction, even partial, is allowed only by written permission by Rollco.
LINEAR UNIT RHL Every care has been taken to ensure the accuracy of the information contained in this catalogue, but no liability can be accepted for any errors or omissions. We reserve the right to make
ACTUATORS POSITION SENSOR
POSITION SENSOR 1 2 SUMMARY P INTRODUCTION PAGE 4 P LTS POSITION SENSOR PAGE 5 P LTL POSITION SENSOR PAGE 9 SUMMARY P LTE POSITION SENSOR PAGE 12 3 INTRODUCTION INTRODUCTION Magnetic position sensors are
Magnetic Field Sensor for pneumatic cylinders BIM-UNT-AP6X-0.3-PSG3S/3GD
ATEX category II 3 G, Ex zone 2 ATEX category II 3 D, Ex zone 22 For T-groove cylinders without mounting accessories Optional accessories for mounting on other cylindrical housings. One-hand mounting possible
Proximity sensors SMT/SME-10, for C-slot
Proximity sensors SMT/SME-10, for C-slot Proximity sensors SMT/SME Product range overview Design Type of mounting Measuring principle Type Operating voltage range For C-slot Standard Insertable in slot
Linear Guides Series OSP-E
inear Guides Series OSP-E Contents Description Page Overview 115-116 Plain Bearing SIDEINE 117-118 Roller Guide POWERSIDE 119-122 Ball Bushing Guide GUIDEINE 123-126 Aluminium Roller Guide PROINE 127-129
Radial grippers DHRS
Key features At a glance General information Flexible range of applications Lateral gripper jaw support for high torque loads Self-centring Gripper jaw centring options Max. repetition accuracy Gripping
Precise. Compact. Reliable. MPZ Small Components Gripper
MPZ Precise. Compact. Reliable. MPZ Small Components Gripper Small 3-finger centric gripper with base jaws guided on T-slots Field of Application F or universal use in clean to slightly dirty working environments,
Parallel grippers HGP, with protective dust cap
Key features At a glance Double-acting piston drive With protective dust cap for use in dusty environments (protection class IP54) Self-centring Variable gripping action: External/internal gripping High
Rotary actuators Rack-and-pinion gears series TRR. Brochure
series TRR Brochure 2 Bosch Rexroth AG Pneumatics series TRR Rotary cylinder, Series TRR angle of rotation: 0-60 Ø2-00 mm with magnetic piston double piston with rack cushioning: pneumatically, adjustable
AGE-S. Application example. Compensation XYZ Compensation Units Heavy Loads. Payload up to 100 kg. Compensation path XY up to ± 14 mm
AGE-S Sizes 100.. 200 Payload up to 100 kg Compensation path XY up to ± 14 mm Compensation path Z up to 12 mm Application example Picking up and setting down components from a rack with a 3-finger centric
Solenoid valves MHJ, fast-switching valves
Solenoid valves MHJ, fast-switching valves Solenoid valves MHJ, fast-switching valves Key features Innovative Versatile Reliable Easy to install Individual electrical connection via connecting cable and
Standard cylinders DNG/DNGZS, ISO 15552
Features Brief description Double-acting For contactless position sensing With adjustable end-position cushioning at both ends Robust tie rod design Standards-based cylinders to ISO15552 (corresponds to
Actuator piston position Sensor Type SHE
Actuator piston position Sensor Type SHE Applications: Non-contact detection of piston position in the actuator Contents Index Page Description... 2 Components... 2 Installation... 3 Amplifier / Display...
Parallel long travel pneumatic gripper
Parallel long travel pneumatic gripper Major Benefits Compact, low profile design with long jaw travel and large moment capacities Total jaw travels up to 125 mm (4.921 in) allows for larger parts, encapsulated
Cylindrical Sensors CY-100 SERIES panasonic-electric-works.net/sunx. Cylindrical Inductive Proximity Sensor GX-M SERIES.
Cylindrical Sensors Photoelectric Sensor CY-100 SERIES Inductive Proximity Sensor GX-M SERIES Listing (2 m cable length type only) Cylindrical Inductive Proximity Sensor GX-M SERIES Cylindrical Photoelectric
Electronic Sensors Solid State, Reed and Proximity Sensors Feedback Packages
Electronic Solid State, Reed and Proximity Feedback Packages & Feedback Contents Hall Effect... 2 Reed Switches... 3 Cordsets... 4 Proximity... 5 Feedback Packages... 8 1 Sensor Specifications Solid State
QD Series Mini Photoelectric Switch
Miniature cubic photoelelectric sensors High performance with long sensing distance 2kHz max. switching frequency Available with cable and M8 plug exit Selectable LO/DO output state Complete protection
Ring Style Sensors 98 Altech Corp. 35 Royal Road Flemington, NJ Phone (908) Fax (908)
Ring Style Sensors RING STYLE INDUCTiVE PROXIMITY SENSORS Altech Ring Sensors are used for variety of applications including punching and stamping operations to detect small metal parts and for the identification
Compact cylinders ADN-S, AEN-S
Compact cylinders ADN-S, AEN-S Compact cylinders ADN-S, AEN-S Key features At a glance Without sintered bearing Free of copper Improved operating behaviour Due to precise manufacturing from a single piece
LRM/55401/M, Roundline cylinder Magnetic piston, double acting
LRM/5540/M, Roundline cylinder > > 3... 00 mm > > Clean line design > > Low friction, long life seals > > Standard magnetic piston for full control system versatility > > Non-lube operation > > Shock and
PED Pneumatic Escapement Modules Double Escapement Sizes Weight Advancing force Stroke Bending moment
PED www.comoso.com Sizes 60.. 96 Weight 0.34 kg.. 2.52 kg Advancing force 83 N.. 265 N Stroke 15 mm.. 60 mm Bending moment 5 Nm.. 10 Nm Application example Combined magazining/separating/feed application
Accessories for pneumatic stroke and rotary actuators CLASSIC and ELEMENT process valves
Accessories for pneumatic stroke and rotary actuators CLASSIC and ELEMENT process valves Complete modular designed accessory program More for less - optimal configuration costs Easy maintenance and commissioning
Table of Contents. ISO/VDMA Series
Table of Contents ISO/VDMA Series...3-22 Features and Benefits... 3 How to Order.... Technical Information... 5 Dimensions Profile Version...6-7 Tie-Rod Version...8-9 Mounting Parts...-16 Switches... 17
LAP4, LAP8. Pneumatic linear drive sizes 4 and 8
Pneumatic linear drive sizes 4 and Torsional and bending resistant profiles T-slots in the outer profile enable individual mounting options Adjustable guiding system (LAP4) Precise linear roller guiding
Linear Position Sensing and Measurement. The appropriate measuring principle for the optimal solution
Linear Position Sensing and Measurement The appropriate measuring principle for the optimal solution 0 mm 48000 mm Micropulse Transducers For use in a potentially explosive environment With IECEx, ATEX,
KONEX Pneumatic Modular Gripping System KONEX Gripping force Torque Piston force (extended)
KONEX Gripping force 100 N Torque 0.9 Nm Piston force (extended) 250 N Application example KONEX weight-reduced, modular gripping system for economical automation in assembly and production KONEX P 50