FSG-2A818/3A818 HIGH PRECISION SURFACE GRINDER

Transcription

1 FSG-2A818/3A818 HIGH PRECISION SURFACE GRINDER

2 FSG-2A8 1 FEATURES HIGH PRECISION SU FSG-2A818.3A818 These grinders have been specially developed and improved in recent years by us to continuously offer you reliable high performance precision surface grinders. And as a guarantee of that reliability we offer one full year limited warranty including parts and labor for mechanical as well as electrical components. The Double-V crossfeed guideway span has been designed applying kinematics to calibrate for minimum bending moments, thus achieving maximum support capability for table and workpiece. All essential castings are made of a high grade of cast iron that is stress relieved by annealing, therefore ensuring t he greatest stability and rigidity with low stress. An interlock has been placed between the electrical cabinet door and power supply as an added safety feature. The maximum distance from table surface to spindle centerline is 18 (450m) which provides more clearance for grinding. FSG-3A818 Note:Machine shown with optional accessories Longitudinal table movement is driven by hydraulic unit. Cross movement is driven by AC motor. Vertical feed is driven by AC motor and equipped with automatic downfeed device and manual micro downfeed device. FSG-2A818 Note:Machine shown with optional accessories Longitudinal table movement is driven by hydraulic unit. Cross movement is driven by AC motor.

3 1 8 3 A S e r i e s FACE GRINDER FEATURES 2 Automatic Surface Grinding Cycle FSG-3A818(Surface Grinder) 1. Turn switch (18) to the( )position. Push button (17) to feed the wheel down close to the workpiece. Then move the wheel down in increments of (0.002mm) with the microfeed device until a spark is generated. 2. Total stock removal is set at the elevating handwheel. Maximum stock removal is (99mm). 3. Turn switch (13) to the( )position and set the crossfeed increment on switch (10). Turn switch (18) to the( )position and set the downfeed increment from (0.002mm) to (0.04mm) at switch (20). 4. Set the required sparkout times (0~9) at switch (22) and set desired wheel retract at switch (15) to have he wheel raise to the preset position after the sparkout passes have been completed. 5. Push button (8) to start the auto-grind cycle. Automatic Plunge Grinding Cycle Turn switch (18) to the( )position. Push button (17) to feed the wheel down close to the workpiece. Then move the wheel down in increments of (0.002mm) with the microfeed device until a spark is generated. 2. Total stock removal is set at the elevating handwheel. Maximum stock removal is (99mm). 3. Turn switch (13) to the( )position. Turn switch (18) to the( ) position and set the downfeed increment from (0.002mm) to (0.04mm) at switch (20). Set the amount of table strokes required between each downfeed increment of switch (21). 4. Set the required sparkout times (0~9) at switch (22) and set desired wheel retract at switch (15) to have the wheel raise to the preset position after the sparkout passes have been completed. 5. Push button (8) to start the auto-grind cycle. MACHINE CONSTRUCTION FSG-3A818(Plunge Grinder) High Precision Cartridge type Spindle Spindle is supported by 4 pieces of class 7(P4) super precision angular contact ball bearings which have been accurately measured, selected and preloaded, and then assembled in offer superior waterresistance, thus increases the life of the spindle bearings. a temperature controlled room to ensure better grinding accuracy and surface finish. The labyrinth seal type structure is designed to offer superior waterresistance, thus increases the life of the spindle bearings. 2HP Low Vibration Spindle Motor By using a 2HP class V3 low vibration spindle motor, both fine grinding and rough grinding can be performed to obtain exceptional grinding result.

4 FSG-2A8 3 MACHINE CONSTRUCTION HIGH PRECISION S Table Reversing Mechanism By using proximity switches, the operator can easily set a suitable table stroke for each workpiece to save grinding time and obtain higher grinding efficiency. The proximity switches have been properly covered for operator safety. Table Guideways DURABLE SLIDEWAYS MACHINE BASE SLIDEWAYS ARE INATED WITH TURCITE-B AND PRECISELY HAND CRAPED. LOW FRICTION SLIDWAYS INCORPORATED WITH AN AUTOMATIC INTERMITTENT LUBRICATION SYSTEM ENSURE HIGH ACCURACY AND LONGER WAY LIFE. The table traverses on hardened and round guideways with accurately sieved steel ball bearings, providing smooth, accurate and efficient table movement. Control Station(FSG-3A818) Elevating Micro Feed Device (FSG-3A818) The elevating system is equipped with a precision graduated micro feed device, consisting of a worm and wormgear for precise manual positioning of the corss axis. The control station can be easily adjusted to a comfortable position for the operator s convenience. All switches, indicators, lamps, LEDS, and displays are ergonomically designed for ease of operation.

5 18 3A818 Series URFACE GRINDER INSPECTION 4 Parallelism of Table Surface to Table Cross Transverse Attach the base of a test indicator to the wheel head. Touch the stylus of the indicator to the table surface. Traverse the table in and out, The indicator variation shall be within "(0.002mm). Runout of Wheel Spindle Conical Surface Apply a test indicator to the rear, middle and front points of conical surface of the wheel spindle, and rotate the wheel spindle, the variation shall be under "(0.0015mm). Parallelism of Table Surface to Table Longitudinal Movement Attache the base of test indicator the the wheel head. Touch the stylus of the indicator to the table surface. Move the table left to right and reverse. The indicator variation shall be within "(0.0025mm). Spindle Dynamic Balancing Test Before delivery, the spindle of each machine has to be calibrated by a portable precision dynamic vibration measuring equipment. The final amplitude of spindle vibration shall be under "/s(0.03mm/s) Parallelism and Squareness of Wheel Spindle Centerline to Table Surface Attach the base of a test indicator to the wheel head. Touch the stylus of the indicator to the table surface. Traverse the table in and out. The indicator variation shall be within "(0.004mm). Steel Ball Sifting Steel balls used in longitudinal movement are all heat treated and sieved by automatic machine which assures the diameter tolerance of steel balls in the same machine is under "(0.002mm) Flatness of Ground Workpiece Due to excellent rigidity and stability of machine structure, the flatness tolerance of ground workpieces shall be "(0.003mm) or better.

6 5 OPT. ACCESSORIES FSG-2A818 Note: ltems marked with are recommended to be factory installed MACHINE LAMP B (3A818) (12V/20W) B (2A818) (12V/20W) DIAMOND DRESSER B CARAT WHEEL FLANGE B Suitable for 8 x 1 1/4 x 1/2 (203x31.75x12.7mm) PUNCH FORMER B Diameter of the punch: 3/32-1 (4 ~ 25mm) Length of the punch: above 7/8 (22mm) ELECTROMAGNETIC CHUCK B V 7 7/8 x17 3/4 (200x450mm) *To order B (2A818) or B (3A818) chuck control is required. PARALLEL DRESSING ATTACHMENT (Manual) B Suitable for 8 (203mm) PARALLEL DRESSING ATTACHMENT (Hydraulic Crossfeed, Manual Downfeed) B Suitable for 8 (203mm) PERMANENT MAGNETIC CHUCK B /8 x17 3/4 (200x450mm) MICRO DOWNFEED DEVICE B (2A818) Micro feed: Per revolution.01 (0.2mm) Per graduation (0.002mm) RAPID ELEVATION WITH MICRO DOWNFEED DEVICE B (2A818) Motor: 1/4 HP (0.19kW) Micro feed: Per revolution 0.01 (0.2mm) Per graduation (0.002mm) INCLINABLE PERMANENT MAGNETIC CHUCK B /8 x1134 (150x300mm) INCLINABLE LECTROMAGNETIC CHUCK B V 7 7/8 x11 3/4 (200x300mm) *To order B (2A818) or B (3A818) chuck control is required.required. PRECISION VISE B x3 (50x76mm) B /2 x4 (63x100mm) B x4 (76x100mm) B /2 x5 (89x127mm) B x5 (100x127mm) SINGLE SIDE WATER BAFFLE B BALANCING STAND B Suitable for 8 (203mm) grinding wheel BALANCING STAND (Roller Type) B Suitable for 8 ~14 (203~355mm)

7 3A818 Series OPT. ACCESSORIES 6 COMBINATION COOLANT & COOLANT SYSTEM DUST EXHAUST UNIT WITH B MAGNETIC SEPARATOR Volume: 42L, Pump:1/8HP B Coolant Capacity: 20L/min Volume: 34L, Pump:1/8HP Space: 21 x14 1/4 (530x360mm) Coolant Capacity: 20L/min Height: 19 7/8 (500mm) Suction Motor: 1/2HP Separator Capacity: 20L/min Space: 24 3/4 x31 1/16 (628x790mm) Height: 26 3/4 (680mm) COOLANT SYSTEM WITH FILTER B Volume: 95L,Pump: 1/8HP Coolant Capacity:20L/min Space: 26 x19 (660x480mm) Height: 24 (610mm) CHUCK CONTROLLER B (2A818) Input: 140V AC Output: 115V DC With variable holding power control and auto.demagnetizer. COOLANT SYSTEM WITH MAGNETIC SEPARATOR B Volume: 50L, Pump: 1/8HP Coolant Capacity: 20L/min Separator Capacity: 20L/min Space: 25 3/4 x20 1/2 (655x520mm) Height: 28 3/4 (730mm) COMBINATION COOLANT & DUST EXHAUST UNIT B Volume: 34L, Pump: 1/8HP Coolant Capacity: 20L/min Space: 15 3/4 x31 1/16 (398x798mm) Height: 26 3/4 (680mm) COOLANT SYSTEM WITH MANUAL PAPER FEEDING DEVICE (With 1 Roll of Paper) B Volume: 85L,Pump: 1/8HP Coolant Capacity: 20L/min Space: 21 21/32 x39 3/8 (550x1000mm) Height: 30 1/2 (775mm) DUST COLLECTOR B Suction Motor: 1/2HP, 2P Space: 18 1/2 x19 11/16 (470x500mm) Height: 23 (585mm) STD. ACCESSORIES UNIVERSAL WHEEL GUARD OR SIDE FORMING B Suitable for: 8 (203mm) SPLASH GUARD WITH NOZZLE FOR COOLANT SYSTEM B CHUCK CONTROLLER B (3A818) Input Voltage: 135V AC Output Voltage: 110V DC With variable holding power control and auto.demagnetizer. 1. Pin spanner wrench 2. Wrench 3. Dust rotection plate 4. Tool box 5. Hex. wrenches 6.Touch-up paint 7. Levelling pad 8. Levelling set screw 9. Small plug 10. Fuse 11. Balancing arbor 12. Wheel flange extractor 13. Big plug 14. Magnetic chuck setting screw 15. Lifting rods

8 SPECIFICATION Description FSG-2A818/3A818 Table size 8 x18 (203x457mm) Max. grinding length Longitudinal 18 (457mm) Max. grinding width Crosswise 8 (203mm) Max. Distance from Table Surface to Spindle Centerline 18 (457mm) Standard Magnetic Chuck Size 7 7/8 x17 3/4 (200x450mm) PERMISSIBLE LOADS OF MACHINE Longitudinal Movement of Table Cross transverse Travel Wheelhead Vertical Infeed Grinding Spindle Drive Travel, hydraulic Maximum travel, manual Table speed, variable Rapid travel, approx. Auto increment. Max. auto travel Max. manual travel Handwheel per revolution Handwheel per graduaion 19 3/4 (500mm) 21 (530mm) 16 ~ 82 fpm(5 ~ 25m/min) 48 imp(960mm/min) 0.02 ~ 0.24 (0.4 ~ 6mm) 9 (230mm) 9 1/2 (240mm) 0.2 (4mm) (0.02m) Automatic infeed (3A only) ~ (0.002 ~ 0.04mm) Handwheel per revolution 0.1 (2mm) Handwheel per graduation (0.01mm) Rapid travel, approx. (3A only)13 imp(330mm/min) Micro Per revolution (3A only)0.01 (0.2mm) feed Per graduation (3A only) (0.002mm) Speed Power rating 60Hz / 3450 rpm, 50Hz / 2850 rpm 2HP/1.5kW Hydraulic Drive Standard accessory 1HP/0.75kW Crossfeed Drive Standard accessory 0.05HP/40W Elevating Drive Standard accessory (3A only)1/4hp/0.19kw Standard Grinding wheel Diameter Width Bore 8 (203mm) 1/2 (12.7mm) 1 1/4 (31.75mm) Floor Space (LxWxH) 90 x62 x68 (2300x1575x1740mm) Net Weight approx. Based on 2A 2620 lbs(1190kg) Rated Power approx. 5HP/3.7kW Packing Dimensions (LxWxH) 73 x61 x87 (1854x1549x2210mm) Note: The manufacturer reserves the right to modify the design, specifications, mechanisms... etc. of the machine without prior notice.all the specifications shown above are just for reference. Grinding with Electromagnetic Chuck MODEL 818 Series A lbs(kg) 474(215) B lbs(kg) 77(35) C lbs(kg) 551(250) A B Grinding without Electromagnetic Chuck The total suggested maximum loads of working table are shown as follows: A=Workpiece B=Magnetic Chuck C=A+B DIMENSIONAL DRAWINGS MODEL 2A818 3A818 A B 85 7/8"(2180mm) 27 1/8"(690mm) C 68"(1740mm) 47 1/2"(1900mm) D E F 1/2" (12.7mm) 12" (305mm) 15/32"(12mm) C K J L H D G F E MODEL 2A/3A818 G H I J K L 8 1/8"(206mm) 10 3/4"(274mm) 10 5/8"(271mm) 18" (457mm) 8" (203mm) 2 1/8"(54mm) I Cat.: C00 / R / / 1000 DTP Design: VIVI / FALCON MACHINE TOOLS CO., LTD. Manual rinders CNC Profile Grinders Automatic Grinders Molecular ecomposition Process (MDP) Grinder VMC (Various Sizes) VMC w. turntable Slant Bad CNC Lathes Teach-in Lathes U.S.A. OFFICE No. 34, Hsing Kong Road, Shang Kang, Chang Hua TAIWAN 509 TEL: FAX: overseas@chevalier.com.tw TA-YA Factory TEL: Tabor Place Santa Fe Springs, CA U.S.A TEL:(562) FAX:(562)