ARMSTRONG-BLUM MANUFACTURING CO. saoo w. Bloomingdale Avenue

Transcription

1 ARMSTRONG-BLUM MANUFACTURING CO. saoo w. Bloomingdale Avenue Chicago Illinois 60639, USA

2 FAST, ACCURATE, EASY OPERATION Powerful blade drive, infinitely variable speed and feed. Quickly change from automatic stock indexing to single cut operation. Digital readout for setting cut-off lengths. Rigid Guide Arms, Carbide-Faced Spring Loaded Blade Guides and Carbide-Faced Back Up Guides for accurate cut-off. All sawing functions controlled from Operator's Console Series 13A Saws are mid-sized, high speed, high production band saws designed and built to a high standard of quality and performance. Nothing that contributes to efficiency, accuracy, speed or operator convenience has been overlooked. Example: fast, accurate shuttle index setting with digital readout to tenths, decimal dial to thousandths, automatic shuttle bar feed with 15" (381 mm) maximum index plus multi-cycle unit for work lengths beyond maximum indexing. Manual control of hydraulically powered shuttle for movement of workpiece in the saw ; cam-controlled hydraulic feed compensation (patented) ensures uniform feed rate through the work ; Work Height Selector, plus many other features described below and on following pages. Choose a Series 13A and you receive as standard, many operating and design features offered only as extra cost options on other machines. This is the heaviest 13" x 13" capacity horizontal band saw on the market and every pound of its weight is designed to produce what you want: faster, more accurate sawing at the lowest possible cost. Positive Blade Tension Control. Safety Switch stops machine in cas e of blade breakage. Hydraulically actuated Machine Vise with adjustable clamping pressure to light gauge materials. Replaceable wear plates. 3 HP Motor drives 1" (25 mm) wide blade through a variable spee d pulley system and worm gear reducer. l Work Height Selector regulates blade ae.8f!ce above the wodrptece HydrauHcally powered Automatic Shuttle Bar Feed Dolly and Vise moves on hardened slide ways. Shuttle Vise, C/ampsunclamps in sequence with Machine Vise. Has adjustable clamping pressure and replaceable wear plates. 2 t:;l.drauhc system uses a 1 HP motor which drives a 6.5 gpm (24.6 Llmin) pump. System conforms to J.I.C. Standard.

3 t Rigid Guide Arms with built-in Carbide-faced Blade Guides. Adjustable left Guide Arm has quick-acting lock. r DESIGNED FOR EFFICIENT, LOW COST CUTTING-OFF Shuttle Index Control. Digital readout to tenths of an inch and decimal dial to thousandths. Heavy cast iron bed provides rigid _ base for saw components Start powers the saw. 2. Master Stop cuts all power to saw. 6. Shuttle Selector opens or closes Vise on Shuttle, or when tumed to "Auto" vise is sequenced with shut tie operation. 3. Out of Stock Switch. Stops saw if no stock is left to shuttle. 4 Multi-Cycle Unit. Controls number of cycles shuttle will index before cut is made. Allows automatic cut-off of lengths longer than single shuttle travel of 15" (381 mm). Cycle Selector controls mode of saw operation A. (Semi-Automatic) Blade Frame retums at completion of cut, entire machine stops. B. (Semi-Automatic) Blade Frame retums at completion of cut, blade only stops. C. (Full Automatic OperatiOn) Blade Frame and shuttle will cycle continuously. 7. Shuttle Manual Control The shuttle 8. Moisture-tight electrical compartment with interlocking fused disconnect switch. Electrical system conforms to J.l. C. Standard. 1(). Piece Counter and Switch (Optional). Required number of pieces are pre-selected and machine stops when that number of pieces have been cut. Counting may be interrupted (for non-automatic cuts) without loss of count by placing switch in "off" position. can be moved "forward" "reverse ; or remain stationary in the "neutral" position by operating the shuttle manual control switch. 11. Feed Pressure Gauge Calibrated Blade Stops or permits blade to run at speed set on Speed Control. 12 Feed Pressure Control is infinitely 9. Four-Position Blade Frame Selector Switch "Rapid Up" raises blade frame quickly. "Rapid Down" moves blade frame down to pre-selected work height. "Neutral"-blade frame remains in position. "Feed"-moves the blade into the workpiece. from 0 to 200 lbs.(91 kgf). variable to apply feed force to blade. 13..Feed Traverse Control infinitely varies blade frame traverse rate speed. 14 Height Selector regulates blade clearance with respect to stock size. 15. Vise Control opens and closes machine (front) vise. 3

4 SERIES 13A FEATURES Automatic Shuttle Bar Feed Unit The Series 13A Automatic Indexing Shuttle unit is 5' 0" (1524 mm) long. The Shuttle assembly has a stroke of 15" (381 mm) and is powered by a hydraulic cylinder to position the work to the required cut-off length. The Shuttle is fitted with non-metallic inserts and moves on replaceable hardened slide ways. An oi ler system provides lubrication for the Shuttle Ways. An automatic indexing Vise with 7" (178 mm) high jaws clamps and unclamps in conjunction with the sequencing of the shuttle and machine Vise mounted on the saw itself. Digital Readout for Cut..Off Lengths The Shuttle stroke length is set from this convenient control located at the operator's position. The handwheel is turned until the desired length is digitally displayed in inches and tenths of an inch. Readout to thousandths of an inch is obtained on the circular decimal dial. A locking screw holds the desired setting as long as required. Blade kerf is automatically included in the shuttle stroke setting. An optional metric digital readout is available. Powerful Blade Drive with Convenient Speed Control (shown with guard removed) The 1" (25 mm) wide band blade is driven by a 3 HP (2.2kW) electric motor transmitting torque through variable speed pulleys and a rugged worm gear speed reducer. The drive band wheel is direct-connected to the worm gear drive which has anti-friction taper roller bearings on the input shaft and a combination single row and double row bearing on the output shaft. Infinitely variable blade speeds from 60 to 450 sfpm (18 to 137m/min) are manually set and easily read on the speed dial (inset).

5 Cam-Controlled Hydraulic Feed Compensation The (Patented) cam-controlled hydraulic feed system automatically compensates for the varying gravitational forces acting on the descending saw frame to ensure a substantially constant feed pressure on the saw blade throughout each cutting cycle. The cam is precisely contoured to match the angular position of the blade frame and it actuates a valve which, in turn, varies the hydraulic back pressure in the feed cylinder. Quickly Adjustable Blade Guide Ann Blade Guide Arms must be placed as close to the workpiece as possible to prevent blade deflection and inaccurate cut-off. A lock on the left (moveable) Guide Arm makes this adjustment a quick, easy operation. Each Guide Arm is equipped with spring loaded, carbide faced guides which maintain correct blade alignment. The Back-Up Carbide Guides are adjustable by means of an eccentric to ensure constant contact with the back of the blade. Coolant is applied to the blade through the Blade Guide. Arms. Coolant flow is adjustable at the point of discharge. Powered Blade Brush A wire brush driven by a Poly-Vee Belt from a pulley integral with the driven band wheel effectively removes chips from the gullets of the blade teeth. Brush rotation is at a speed calculated for most efficient chip clearing. In addition, a Blade Wiper Assembly is mounted at the top of the frame to return coolant and stray chips to the machine bed. 5

6 J.I.C. Electrical& All electrical equipment in Series 13A machines conforms to J.I.C. Standard for General Purpose Machine Tools (EGP ) and National Electrical Code NEMA No This includes an Automatic Magnetic Motor Starter with overload and no voltage protection. A transformer provides low voltage (115V) to operator controls and to the machine lighting circuit. A fused disconnect switch interlocks with the electrical compartment door. Electrical wiring shown is contained in a NEMA type 12 moisture-tight compartment. Positive Blade Tension Control Full 30,000 lb. psi (13608 kg) tension on the blade is provided by a simple but effective blade tensioning mechanism. The handwheel moves a slide on which the idler band wheel is mounted. When a positive stop is contacted the blade is correctly tensioned. A Safety Switch in the mechanism automatically stops the machine in case of blade breakage. The idler band wheel is gimbal mounted to ensure proper alignment of the blade. Integral Coolant Pump A 114 H.P Machine Tool Type coo lant pump mounted on the machine base supplies coolant to the band blade. A reservoir in the machine base holds 12 gallons (45 L) of coolant. The pump also supplies coolant under pressure to the Flushing Hose which is included as standard equipment. A Sight Gauge indicates coolant level in the machine base.

7 lllarjt:l SERIES 13A I SPECIFICATIONS and DIMEN SIONS I -+ D === b le 0 ift - t-- t-- - t-- 1- J! j I ' - ii, L= il_ '- ltalj b E f I- tn r i-- F G DIMENSIONS SPECIFICATIONS CAPACITY Round Rectangular 13" 13" X 13" (330 x 330 mm) (330 x 330 mm) BLADE (Welded Endless) Length Width, Gage 12' 6" 1" X.035 (3810 mm) (25.4 x 0.89 mm) BLADE SPEEDS-SFPM Infinitely Variable ( m/min.) FEED PRESSURE Infinitely Variable Hydraulically Compensated lbs. (0-91 kgf) BAND WHEELS, Diameter 16" (406mm) DISCHARGE TRAY- Length 18" (457 mm) COOLANT CAPACITY 12 gal (45 L) HYDRAULIC TANK CAPACITY 21 gal (79 L) MOTORS, ELECTRIC Main Drive Hydraulic Pump Coolant Pump 3HP 1V2HP % HP (2.2 kw) (1.1 kw) (0.19 kw) 5' 0" 15" (1524 mm) (381 mm) 7" 13V2" (178 mm) (343 mm) AUTOMATIC SHUTTLE BAR FEED Length (Includes 1 Vise & 2 Rollers) Shuttle Travel-Single Cycle Multi-cycle standard equipment I AA " A " (2134 mm) (1295 mm) B " (965mm) c " (787mm) D %'' E (1 149 mm) W' (2857mm) F " (1524mm) G W' (2400mm) VISES Height Max. Opening 7