MODEL A-I-SPECIFICATIONS

Size: px
Start display at page:

Download "MODEL A-I-SPECIFICATIONS"

Transcription

1

2 ARTER Model A Rotary Surface Grinders are built in a light and heavy series. General Construction- The general design of both models is the same but the major units of the A-3 machines are of greater proportions. The wheel head moves on a flat and vee track, hand and automatic feeds being provided, the final drive being a rack and pinion. The wheel spindle runs in straight holed, split, bronze bearings, positioned in tapered sleeves. The spindle is driven by a 4" belt running over a laminated driven pulley, a ball bearing mounted idler providing belt tension. The knee moves on dovetailed ways, a double taper gib running its full length insuring rigidity in all positions. It is raised or lowered by means of an elevating screw and handwheel, the latter carrying a disc graduated in thousandths (or millimeters). The wheel mount is positioned over a key on the tapered end of the spindle. Adjustable balancing weights are provided. Standard equipment includes one x 1" x 8" hole wheel: Wider wheels can be used. The wheel is dressed by placing the diamond and holder on the chuck and moving the wheel across it. Extras- Automatic work table elevating attachment operated by the wheel slide and giving feeds at either or both ends of the work ranging from.25" to.3". A direct current generator on the machine driven from the main drive shaft pulley can be supplied for energizing the chuck. Auxiliary top plates of various diameters for the magnetic chuck. Model A-1- This model has three chuck speeds and three wheel slide traverse speeds for each chuck speed. The spindle is mounted in a housing which is hung on a substantial taper pin positioned in the knee. This permits the tilting of the work table for grinding concave or convex work. The spindle has a hardened and ground steel conical collar shrunk onto its upper end. The angular face of this collar runs in a bronze bearing forming a self-centering, self-adjusting, smooth running bearing. The collar dips in an oil reservoir just below it and by means of spiral grooves carries oil up the face of the bearing. The oil flows back to the reservoir through passages cut in the bearing. A sight oil cup permits maintenance of the oil level. The lower end of this spindle runs in a straight-holed, split, adjustable bronze bearing similarly lubricated. Control of the spindle is through an expanding friction clutch. A brake is provided, operated by a clutch lever, for quick stopping of the spindle. The chuck is attached to the threaded end of the spindle nose by means of an adaptor plate. Model A-3- This model has four chuck speeds and thre_e wheel slide traverse speeds for each chuck speed. The chuck spindle is mounted, top and bottom, in precision matched sets of preloaded, doublerow ball bearings, grease lubricated. The spindle housing is hung on a substantial taper pin positioned in the knee. This construction permits tilting of the work table for grinding concave or convex work. Adjustment is made by means of a screw, and a graduated plate indicates the degree of tilt. The chuck is bolted to the flanged end of the spindle.

3 MODEL A-I-SPECIFICATIONS Surface Diameter of M agn etic Chuck Greatest Swing Inside W ater P a n V ertica l C a pacity-full Diam eter Wheel Tilt of Work Table for Convex Grinding. Tilt of Work Table for Concave G rinding Dia meter of Grinding Wheel- 1" wide, 8" hole Chuck Spindle Speeds.... M ain Shaft R.P.M Wheel Spindle R.P.M M a in D rive Motor R.P.M N et W eight Crated Weight Boxed W eight (Cubic feet 8" -18, 12 " ). F loor Space O ccupied " 12" 8.Y2" 13 " 16 " 11 " 9" HP " X 7" 9" 12 so HP " X 7"

4 MODEL A-3-SPECIFICA TIONS 12 " Surface Diameter of Magnetic Chuck. Greatest Swing Inside Water P an Vertical Capacity- Full Di ameter Wheel... Tilt of Work Table for Convex G rinding. Tilt of Work T able for Concave Grinding. Diameter of Grinding Wheel 1" wide, 8" hole..... Chuck Spindle Speeds. Main Shaft R.P.M Wheel Spindle R.P.M.. Main Drive Motor R.P om o. Net Weight Crated W eight.. Boxed Weight (Cubic feet 12 " - 16, 16" - 19). Floor Spa ce Occupied " 13 " 2 " 17 " 2" 9,Y " 9,Y " ,Y HP " X 7 " ,Y HP " X 7 11

5 The countershaft assembly is driven by chain from the grinder main shaft. The countershaft belt is shifted on the three-step cone pulleys by the lever over the unit. From the countershaft, a universal shaft with automobile type joints drives the chuck spindle through a bronze spiral gear and a cast iron spiral gear mounted on the chuck spindle. Motor Drive- On both models the drive is by means of multiple vee belts. The motor is positioned on the rails pivotably mounted on an extension of the machine base. Screws are provided for the belt tension. St G v T T D c!v "'!V N c B F This v1ew shows the machine with all belt guards removed. The speed change mechan ism for the chuck and wheel slide is enclosed in an oil tight case. All shaft bearings are force-feed lubricated from a plunger pump positioned within the case. Duplex roller chains are used and tension idlers are provided. Clutches are of the multiple disc type. Levers for making speed changes are mounted at the front of the machine. The drive between countershaft and chuck spindle is by twin vee belts to a worm shaft carrying a hardened and ground worm, mating with a bronze worm wheel on the chuck spindle. A multiple disc clutch is mounted on the worm shaft and is so constructed as to act as a brake when declutched. From the countershaft, and by means of three-step pulleys a reversing gear mechanism and a rack and pinion, drive is provided for wheel slide reciprocation. The main shaft, both belt idlers, and the chuck drive shaft, are ball bearing mounted. Chain driven shafts run in needle bearings. The chuck collector rings are small in diameter and are attached to the bottom of the chuck spindle. The brushes are readily accessible. Chuck coil replacements can be made by removing the chuck top plate only. With this model we supply a long tank having several baffle plates, these trapping the chips and dirt in the coolant, so that clean liquid flows to the grinding wheel.

6 The illustrations on t his page are typical Arter Rotary Surface Grinder jobs. is tilted to the angle required. To grind gear s haper cutters the chuck Ball bearing spacers are ground in pairs to parallelism of.5 11 on a Model A-3. Grinding gears, spacers, washers, chasers, and rolls, in multiple are common jobs. parts present no difficultie s. Circular surfaces on irregular On master connecting rods and other parts a flat surface, a fillet and a hub diameter are ground in one chucking. Saws of all kinds, thrust collars, s leeves and the like are ground with the faint grinding lines in the des irable concentric p a ttern. Fixtures, held magnetically, are frequently u sed. The chucks have a hardened and ground centering bushing for the fi x ture pilot. Pump and Tank- The coolant tank 1s positioned on the floor behind the grinder. The motor driven pump is of the submerged centrifugal type with all bearings above the liquid. The coolant nozzle is adjustable for work positions. General- All revolving parts of the machines and belts are guarded with exception of the low powered slide reversing gear box belt. Oil cups in plain sight are provided for supplying oil to those parts not continuously lubricated, Printed in United States of America 6-45

Chain Box and Knife. Item # Description Part Number 180-D & GS

Chain Box and Knife. Item # Description Part Number 180-D & GS Chain Box and Knife Item # Description Part Number 180-D & GS 1 Groove pin 2275-03160 2 Hex cap screw 2175-03061 3 Washer 2275-03060 4 Setscrew 2175-07163 5 Chain box 4975-00355 6 Berkel logo 3175-00152

More information

INDEX. PAGE Adjustment mechanism for radial position of block on rotating

INDEX. PAGE Adjustment mechanism for radial position of block on rotating INDEX Adjustment mechanism for radial position of block on rotating arm 520 Amplifying mechanism for precision measuring instruments--491 Angular movement, crank and link mechanisms for increasing 251,

More information

No. CLMP05 January 11, Parts Price List Clausing Lathes & Mills P.O. BOX 877 GOSHEN, IN PHONE (574) FAX (574)

No. CLMP05 January 11, Parts Price List Clausing Lathes & Mills P.O. BOX 877 GOSHEN, IN PHONE (574) FAX (574) No. CLMP05 January 11, 2005 P.O. BOX 877 GOSHEN, IN 46527-0877 PHONE (574) 533-0371 FAX (574) 533-0403 EMAIL info@clausingsc.com Website http://www.clausing-industrial.com Note: Please do not give credit

More information

A P R 0 D U C T 0 F '' A B R A S I V E "

A P R 0 D U C T 0 F '' A B R A S I V E A P R 0 D U C T 0 F '' A B R A S I V E " A T T A c H tr EXHAUSTER ATTACHMENT Where dry grinding predominates, this attachment will collect over 90% of the dust which might prove injurious to nearby machines

More information

SP - SURFACE GRINDING AND MILLING MACHINES. AZ spa MACHINE TOOLS. SP1300 SP1600 SP2000 version M-Y-PLC

SP - SURFACE GRINDING AND MILLING MACHINES. AZ spa MACHINE TOOLS. SP1300 SP1600 SP2000 version M-Y-PLC SP - AZ spa MACHINE TOOLS SP1300 version M-Y-PLC 0.2 Variable speed - on the table movement - on the head movement - on the grinding wheel rotation Automatic and programmable working cycle SP1300 PLC PLC

More information

SECTION 9: PARTS Head Breakdown

SECTION 9: PARTS Head Breakdown G3102/G3103 Vertical Mill -45-1 1-1 2 2-1 3 3-1 4 5 6 7 8 9 9-1 10 10-1 11 12 13 14 15 16 17 18 19 20 20-1 21 22 22-1 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 42 43 44 45 46 47 48 49 50 51

More information

HMD v Power Feed with Coolant HMD v Type I plug, Power Feed with Coolant

HMD v Power Feed with Coolant HMD v Type I plug, Power Feed with Coolant 0925202 HMD925 20v Power Feed with Coolant 0925302 HMD925 20v Type I plug, Power Feed with Coolant b a 5 HOOKS TO COOLANT INDUCER 8 7 9 29 3 0b 0a 0 36 23 8 7 3 2b 2a 2 a 7 Part / Serial Number Label 33

More information

Marine Engineering Exam Resource Review of Couplings

Marine Engineering Exam Resource Review of Couplings 1. What are rigid couplings used for? Used to join drive shafts together. True alignment and rigidity are required. Example Drive shafts and production lines, bridge cranes, solid shaft that needs to be

More information

PARTS. Headstock 133A 127A 107A 72 73A A 55A 37A -71-

PARTS. Headstock 133A 127A 107A 72 73A A 55A 37A -71- -71- Headstock 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66

More information

SECTION 9: PARTS. Main -59- Model G0747/G0748 (Mfg. Since 8/12)

SECTION 9: PARTS. Main -59- Model G0747/G0748 (Mfg. Since 8/12) SECTION 9: PARTS Main 8 2 4 6 7 9 10 1 13 23 14 16 15 18 19 17 131 126 125 127 128 129 132 133 119 62 38 39 40 37 32 33 43 41 42 49 46 47 50 51 65 69 44 74 48 61 31 52 60 75 76 77 71 80 53 54 82 104 103

More information

Repair Manual and Spare Parts List

Repair Manual and Spare Parts List Hydraulic Drive Unit Type Techn. Doc. No. 362 and Accessories for Pipe Cutting Machine Darstellung kann vom Original abweichen Repair Manual and 580067000_Inst_en_Version_03 Repair General In general,

More information

SINGLE WIDE MASTER CATALOG GOSS COMMUNITY UNIT GOSS COMMUNITY FOLDER

SINGLE WIDE MASTER CATALOG GOSS COMMUNITY UNIT GOSS COMMUNITY FOLDER SINGLE WIDE MASTER CATALOG GOSS COMMUNITY UNIT GOSS (Click on the name to be taken to that section) Stocking Manufacturer of Quality Replacement Parts (815) 965-0884 Fax (815)965-1049 Welcome to the Quality

More information

E L L I O T T 14M, 18M & 24M. Contents OPERATORS INSTRUCTION HANDBOOK FOR THE HIGH SPEED SHAPING MACHINES MODELS. Also COMPONENT PARTS LIST.

E L L I O T T 14M, 18M & 24M. Contents OPERATORS INSTRUCTION HANDBOOK FOR THE HIGH SPEED SHAPING MACHINES MODELS. Also COMPONENT PARTS LIST. OPERATORS INSTRUCTION HANDBOOK FOR THE E L L I O T T HIGH SPEED SHAPING MACHINES MODELS 14M, 18M & 24M Also COMPONENT PARTS LIST Contents Page Slinging 2 Examination 2 Cleaning 2 Installation 3 Foundation

More information

SERIES I MILLING MACHINES

SERIES I MILLING MACHINES INSTALLATION, OPERATION, MAINTENANCE, AND PARTS LIST SERIES I MILLING MACHINES TP5260 Revised: August 29, 2005 Manual No. M-450 Litho in U.S.A. Part No. M -0009500-0450 June, 2003 CHAPTER 4 - PARTS LISTINGS

More information

ON-THE-VEHICLE BRAKE LATHE

ON-THE-VEHICLE BRAKE LATHE 800 ON-THE-VEHICLE BRAKE LATHE Parts Identification READ these instructions before placing unit in service. KEEP these and other materials delivered with the unit in a binder near the machine for ease

More information

MOTOR PARTS DIAGRAM. Wires to Motor. Cord

MOTOR PARTS DIAGRAM. Wires to Motor. Cord 17625 17627 17605 17624 17614 17611 05462 17612 MOTOR PARTS DIAGRAM 17601 17609 17626 17608 17618 17613 17603 17602 17607 17610 17617 17628 Wires to Motor Cord 17623 17606 17602 17604 17600 17630 17632

More information

ANSI B Index

ANSI B Index Index A Abrasive disc wheels... 16 17, 79, 99 mounting... 39 40, 94 Abrasive flap disc wheels... 23 Abrasive wheel... 1, 89 Portable air grinding machines... 26 Acceptance of shipment... 27 Actuating controls...

More information

JET FINISHING. Surface Grinders Bench Grinders Accessories

JET FINISHING. Surface Grinders Bench Grinders Accessories JET FINISHING Surface Grinders.............................. 120 Bench Grinders............................... 122 Accessories................................... 122 119 6"x18" PRECISION MANUAL SURFACE

More information

PARTS. For Machines Mfg. Since 8/09. Headstock 133A 127A 107A 105A 73A 55A 37A -69-

PARTS. For Machines Mfg. Since 8/09. Headstock 133A 127A 107A 105A 73A 55A 37A -69- For Machines Mfg. Since 8/09 Model SB1028-69- Headstock 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53

More information

WILTON SAWING. Horizontal Bandsaw s Vertical Bandsaws Cold Saws Cold Saw Blades Accessories... 32

WILTON SAWING. Horizontal Bandsaw s Vertical Bandsaws Cold Saws Cold Saw Blades Accessories... 32 Horizontal Bandsaw s........................... 18 Vertical Bandsaws.............................. 24 Cold Saws.................................... 27 Cold Saw Blades............................... 31

More information

INDEX. 414 Agitator reversing mechanism which varies point of reversal. 250 Alternate and intermittent drive for two shafts

INDEX. 414 Agitator reversing mechanism which varies point of reversal. 250 Alternate and intermittent drive for two shafts INDEX Agitating device for pin hopper.----------------------------------------- 414 Agitator reversing mechanism which varies point of reversal. 250 Alternate and intermittent drive for two shafts.-----.----------.--..--

More information

Bulletin C Dean Pump Division. Heavy Duty, High Temperature Process Pumps. R4140 Telescoping Guard. R4140 C-Face Motor Support

Bulletin C Dean Pump Division. Heavy Duty, High Temperature Process Pumps. R4140 Telescoping Guard. R4140 C-Face Motor Support Bulletin C 1.4.43 Dean Pump Division Heavy Duty, High Temperature Process Pumps R4140 Telescoping Guard R4140 C-Face Motor Support Dean Pump Series R Centrifugal Process Pumps Capacities to 5000 GPM (1135

More information

Pony V Page 1 of 24 Battery Mounting Bracket

Pony V Page 1 of 24 Battery Mounting Bracket 5151 Pony V Page 1 of 24 Battery Mounting Bracket 5151 Pony V Page 2 of 24 Battery Mounting Bracket 2 9296 2 CABLE- battery (replaces #9223) 4 9224 1 CLIP- vent tube shield (small) 6 9826 2 NUT- hex, 5/16"-24

More information

SURFACE GRINDERS. A Line of Precision Low-cost, High Performance Surface Grinders

SURFACE GRINDERS. A Line of Precision Low-cost, High Performance Surface Grinders SURFACE GRINDERS PRODUCT CATALOG www.clausing-industrial.com 800.323.0972 SURFACE GRINDERS A Line of Precision Low-cost, High Performance Surface Grinders Precision Manual Surface Grinders Precision Hydraulic

More information

PARTS MANUAL. SERIAL NO: to BAND SAWING MACHINE

PARTS MANUAL. SERIAL NO: to BAND SAWING MACHINE PARTS MANUAL MODEL: TF-2025M SERIAL NO: 543-99101 to BAND SAWING MACHINE MACHINE SPECIFICATIONS MODEL VOLTAGE CYCLE PHASE SERIAL NO. For your information and future reference, insert pertinent data concerning

More information

Hydra ulic po A single leftl' hydraulic - ' chuck and

Hydra ulic po A single leftl' hydraulic - ' chuck and "" These two. basically diflt will, each in its fjw1j ra with minimum operator The No. 7 is the larg~ ram type turret lathe b. any cabinet leg, is 5501 wall bed with deep Jxll walls, forms an e:rceedi.

More information

ARMSTRONG-BLUM MANUFACTURING CO. saoo w. Bloomingdale Avenue

ARMSTRONG-BLUM MANUFACTURING CO. saoo w. Bloomingdale Avenue ARMSTRONG-BLUM MANUFACTURING CO. saoo w. Bloomingdale Avenue Chicago Illinois 60639, USA FAST, ACCURATE, EASY OPERATION Powerful blade drive, infinitely variable speed and feed. Quickly change from automatic

More information

Precision Surface Grinder

Precision Surface Grinder Precision Surface Grinder SGS-2040 AHD/SD SGS-2060 AHD/SD SGS-S2460 AHD/SD A 70.9" (1800) 107.3" (2725) 110.2" (2800) B 118.1" (3000) 171.3" (4350) 171.3" (4350) C 163.8" (4160) 236.2" (6000) 244.1" (6200)

More information

JET FINISHING. Surface Grinders Bench Grinders Accessories

JET FINISHING. Surface Grinders Bench Grinders Accessories Surface Grinders.............................. 120 Bench Grinders............................... 122 Accessories................................... 122 119 6"x18" PRECISION MANUAL SURFACE GRINDER FINISHING

More information

18Ys" Swing Over Ways SIXTEEN GEARED SPINDLE SPEEDS TWELVE FEED CHANGES '- 2" BAR CAPACITY \VOODWARD AVE. EASA T RIDGE/ MICHIGAN

18Ys Swing Over Ways SIXTEEN GEARED SPINDLE SPEEDS TWELVE FEED CHANGES '- 2 BAR CAPACITY \VOODWARD AVE. EASA T RIDGE/ MICHIGAN Exclusive Representatives B l EIGH 1t'W STOGKER MAGHI~E TOOL C J,. JO.:?iDAN 4-6555 23675 \VOODWARD AVE. EASA T RIDGE/ MICHIGAN SIXTEEN GEARED SPINDLE SPEEDS TWELVE FEED CHANGES '- 2" BAR CAPACITY FOR

More information

FSG-2A818/3A818 HIGH PRECISION SURFACE GRINDER

FSG-2A818/3A818 HIGH PRECISION SURFACE GRINDER FSG-2A818/3A818 HIGH PRECISION SURFACE GRINDER FSG-2A8 1 FEATURES HIGH PRECISION SU FSG-2A818.3A818 These grinders have been specially developed and improved in recent years by us to continuously offer

More information

Repair Manual and Spare Parts List

Repair Manual and Spare Parts List Pneumatic Drive Unit Type Techn. Doc. No. 352 and Accessories for Pipe Cutting Machine Darstellung kann vom Original abweichen Repair Manual and 580027000_Inst_en_Version_02 Repair General In general,

More information

Repair Parts Parts List for 13" Thickness Planer Model No. TP13001

Repair Parts Parts List for 13 Thickness Planer Model No. TP13001 Parts List for " Thickness Planer Model. TP00 Figure 0 Always order by Part Number - t by Number.. 0 00-0 0 0 - - 0- Cord w/plug * Screw Pan Hd M x 0.-0 Housing Switch Gasket Foam Motor (Includes Brushes)

More information

1822-I/1822-IC. Spindle Assembly. Pipe & Bolt Threading Machine. Ridge Tool Company/Elyria, Ohio, U.S.A. 2* 3 4 5* *

1822-I/1822-IC. Spindle Assembly. Pipe & Bolt Threading Machine. Ridge Tool Company/Elyria, Ohio, U.S.A. 2* 3 4 5* * -I/-IC Spindle Assembly * * * 0 * * * 0 * * 0* * * Rear Cover * Screw () * Washer () Top Cover w/clips (Includes,, ) * J Clip () Front Cover * Screw () Pivot Rod Support () Pivot Rod () 0 Shoulder Screw

More information

This is trial version

This is trial version Z-Standards Contents (Alphabetical order, terms partly according to DIN 16750) A All dimensions shown in this catalogue are specified in mm, given tolerances refer to an ambient temperature of 20 C Prod.-No.

More information

MODEL SB1024F 9" X 42" MILLING MACHINE w/dro. Manual Insert

MODEL SB1024F 9 X 42 MILLING MACHINE w/dro. Manual Insert MODEL SB1024F 9" X 42" MILLING MACHINE w/dro Manual Insert PHONE: (360) 734-1540 www.southbendlathe.com The Model SB1024F Milling Machine is the same machine as the Model SB1024 except for the following:

More information

HP Electric PTO Horse Tiller Page 1 of 23 Bolo Tine Assemblies

HP Electric PTO Horse Tiller Page 1 of 23 Bolo Tine Assemblies 12090-8HP Electric PTO Horse Tiller Page 1 of 23 Bolo Tine Assemblies 12090-8HP Electric PTO Horse Tiller Page 2 of 23 Bolo Tine Assemblies 1 1901975001 2 S Tine Holder-welded steel, fits left or right

More information

Clausing Precision Manual Surface Grinders

Clausing Precision Manual Surface Grinders Clausing Precision Manual Surface Grinders Precision Manual Surface Grinders with Table Sizes: 6" x 18" & 8" x 18" Standard Features... High precision cartridge spindle Anti-wear guide ways coated with

More information

MAIN PRICE LIST. - B 487 Perforated Strip 2 1/2" B 488 Perforated Strip 3 1/2" B 482 Perforated Strip 4 1/2" 9 1.

MAIN PRICE LIST. - B 487 Perforated Strip 2 1/2 B 488 Perforated Strip 3 1/2 B 482 Perforated Strip 4 1/2 9 1. PERFORATED STRIPS LENGTH HOLES GBP 1 Perforated Strip 12 1/2" 25 1.63 1 a Perforated Strip 9 1/2" 19 1.51 1 b Perforated Strip 7 1/2" 15 1.39 2 Perforated Strip 5 1/2" 11 0.90 2 a Perforated Strip 4 1/2"

More information

Magnesium Option, Late Model Front Seal, Viton, P/N 67256V Rear Seal, Viton, P/N 67257V Shifter Installed Heat Treated Yoke, P/N

Magnesium Option, Late Model Front Seal, Viton, P/N 67256V Rear Seal, Viton, P/N 67257V Shifter Installed Heat Treated Yoke, P/N DESCRIPTION OPTION Magnesium Option, Late Model 80100L Front Seal, Viton, P/N 67256V 80109 Rear Seal, Viton, P/N 67257V 80110L Shifter Installed 80112L Heat Treated Yoke, P/N 62946-6 80119-6 Heat Treated

More information

MILLING MACHINES 30 / 40 / 50. A wide range of models to select from light to heavy duty models

MILLING MACHINES 30 / 40 / 50. A wide range of models to select from light to heavy duty models Since 1977 MILLING MACHINES A wide range of models to select from light to heavy duty models SHIAN RONG JING JI CO., LTD. No. 95, Ln. 61, Dafu Rd., Shengang Dist.,Taichung City 429, Taiwan. TEL: 886-4-2523

More information

SECTION 9: PARTS. Headstock

SECTION 9: PARTS. Headstock SECTION 9: PARTS We do our best to stock replacement parts when possible, but we cannot guarantee that all parts shown are available for purchase. Call (800) 523-4777 or visit www.grizzly.com/parts to

More information

Models 642E, 642F, 662E, 644E, 664F, & 6A4E

Models 642E, 642F, 662E, 644E, 664F, & 6A4E Models E, F, E, E, F, & AE 0 0 0 0 Models E, F, E, E, F, & AE. -0 Lock Jam Nut /-. -0 Flat Idler. -B Auger Idler Arm. 0-0A Hex Cap Screw /- x.0. -0 Bushing. -0 Bell Washer. -00 Hex Nut /-. -0 Hex Lock

More information

GROB 4V-24 Parts. GrobBandSaw.com

GROB 4V-24 Parts. GrobBandSaw.com GROB 4V- Parts GrobBandSaw.com 888-550-3116 18 19 20 21 22 5/16-18x1/2 Hex Head Cap Screw ( 14 ) 34 35 36 37 38 39 40 39 41 42 43 44 45 46 17 16 3/8-16x3/4 Hex Head Cap Screw ( 2 ) 31 30 15 5/16-18x1 Hex

More information

10.5 gal. Vertical Oil Lubricated Air Compressor

10.5 gal. Vertical Oil Lubricated Air Compressor 10.5 gal. Vertical Oil Lubricated Air Compressor Model No. AC1104 Tank volume: 10.5 gal. (40 L) Direct drive Oil-lubricated single cylinder pump for durability and long life triple the pump life of comparable

More information

CRANKSHAFT GRINDING MACHINES

CRANKSHAFT GRINDING MACHINES CRANKSHAFT GRINDING MACHINES 40 years of experience in Crankshaft Grinding Machines. The most complete range from 1.5 meters to 14 meters crankshaft length AZ is the world leader in the production of crankshaft

More information

BRAKE SERVICING MACHINES CARS LINE

BRAKE SERVICING MACHINES CARS LINE BRAKE SERVICING MACHINES CARS LINE PROBLEM S SOLU Problems that can arise during the braking, as strong vibrations and VIBRA CLAMPING ON THE BRAKING CALLIPER DISJOINT AXIAL DRIVE MOVEMENT The clamping

More information

SECTION 9: PARTS. Headstock -43- Model G0761 (Mfd. Since 10/13) A

SECTION 9: PARTS. Headstock -43- Model G0761 (Mfd. Since 10/13) A SECTION 9: PARTS Headstock 2 21 2 20 112 21 3 57 6 23 59 29 5 97 86 87 85 10 113 2 109 110 111 108 119 98 122 73 29 120 58 121 52 113 11 70 99 115 116 117 118 112 106 105 107 0 65 66 39 101 16 15 36 3

More information

THIS LISTING SHOWS ALL KIT COMPONENT PARTS, PLUS LISTS THE TOOL(S) THE KIT SERVICES.

THIS LISTING SHOWS ALL KIT COMPONENT PARTS, PLUS LISTS THE TOOL(S) THE KIT SERVICES. TO INFORM YOU PRODUCT SUPPORT BULLETIN # 288 TO: AUTHORIZED Portable Electric Tool SERVICE STATIONS DATE: JUNE, 1996 BRANCH OFFICE/SERVICE CENTERS, BRANCH MANAGERS REGIONAL MANAGERS, DISTRICT MANAGERS,

More information

DUAL-END DRIVE JOURNALTRUING AND AXLE LATHES ~ FARREL COMPANY, DIVISION OF USM CORPORATION, ROCHESTER, N.Y.

DUAL-END DRIVE JOURNALTRUING AND AXLE LATHES ~ FARREL COMPANY, DIVISION OF USM CORPORATION, ROCHESTER, N.Y. 5856 N.Pt. Washin&ton Rd. Pho ne: WOodrufl4 3310 Phone: Glendale 8 1551 Phone WOodland 8 2291 Phone: 188-1421 Phone: CEntral 2-8233 I ~ -.. y - - _::. "' - J I I ---------- ~--------- DUAL-END DRIVE JOURNALTRUING

More information

Driver Driven. InputSpeed. Gears

Driver Driven. InputSpeed. Gears Gears Gears are toothed wheels designed to transmit rotary motion and power from one part of a mechanism to another. They are fitted to shafts with special devices called keys (or splines) that ensure

More information

WARNING: To reduce the risk of SAVE THIS MANUAL FOR FUTURE REFERENCE

WARNING: To reduce the risk of SAVE THIS MANUAL FOR FUTURE REFERENCE ' ($ 0$$/,&+)/ 0'(/',//( WARNING: To reduce the risk of injury, the user must read and understand the operator's manual before using this product. Part SP0 SAVE THIS MANUAL FOR FUTURE REFERENCE Printed

More information

ATV 90 UTILITY GREEN (A2006KUB2BUSG) Page 1 of 60 AIR INTAKE ASSEMBLY

ATV 90 UTILITY GREEN (A2006KUB2BUSG) Page 1 of 60 AIR INTAKE ASSEMBLY 2006 ATV 90 UTILITY GREEN (A2006KUB2BUSG) Page 1 of 60 AIR INTAKE ASSEMBLY 2006 ATV 90 UTILITY GREEN (A2006KUB2BUSG) Page 2 of 60 AIR INTAKE ASSEMBLY Ref # Part Number Qty S/P/F Description 1 3303-005

More information

DRILL PRESSES. Mechanical Variable Speeds rpm Electronic Variable Speeds rpm CNC Power Feed EVS Speeds rpm

DRILL PRESSES. Mechanical Variable Speeds rpm Electronic Variable Speeds rpm CNC Power Feed EVS Speeds rpm DRILL PRESSES PRODUCT CATALOG www.clausing-industrial.com 800.323.0972 DRILL PRESSES Mechanical Variable Speeds 150 2000rpm Electronic Variable Speeds 50 2000rpm CNC Power Feed EVS Speeds 50 2000 rpm 20

More information

SPARE PARTS LIST. CHAIN SAWS 435 E from

SPARE PARTS LIST. CHAIN SAWS 435 E from SPARE PARTS LIST CHAIN SAWS 435 E from 2011-05- ACCESSORIES 435 E from 2011-05- ACCESSORIES 435 E from 2011-05- Ref Part No Description Remark QTY KIT 1 503 55 85-04 TOOL 1 CARBURETOR 435 E from 2011-05-

More information

ALLENAIR ROTARY INDEX TABLES

ALLENAIR ROTARY INDEX TABLES SOLENOID PRESSURE PILOT BLEED PILOT BASIC TABLE ALLENAIR ROTARY INDEX are precision indexing mechanisms... unsurpassed in accuracy, performance and dollar value. We know of no other Tables of equal accuracy

More information

ATV 90 UTILITY CALIFORNIA GREEN (A2008KUB2BCAG) Page 1 of 58 AIR INTAKE ASSEMBLY

ATV 90 UTILITY CALIFORNIA GREEN (A2008KUB2BCAG) Page 1 of 58 AIR INTAKE ASSEMBLY 2008 ATV 90 UTILITY CALIFORNIA GREEN (A2008KUB2BCAG) Page 1 of 58 AIR INTAKE ASSEMBLY 2008 ATV 90 UTILITY CALIFORNIA GREEN (A2008KUB2BCAG) Page 2 of 58 AIR INTAKE ASSEMBLY Ref # Part Number Qty S/P/F Description

More information

Chapter. Steering System Technology

Chapter. Steering System Technology Chapter 78 Steering System Technology Objectives After studying this chapter, you will be able to: Explain the operating principles of steering systems. Identify the major parts of a steering system. Compare

More information

05060 Coolant Bottle Assembly

05060 Coolant Bottle Assembly Coolant Bottle Assembly 05060 Coolant Bottle Assembly 0506 Round Bottle 05059 Coolant Botttle Bracket 05065 Ball Valve 05067 Brass Barb Fitting (bottem of the bottle) 030 Vinyl Tube 07080 Brass Fitting

More information

UNISON CORPORATION. DedTru Centerless Grinding Product Line

UNISON CORPORATION. DedTru Centerless Grinding Product Line Price List PL UNISON CORPORATION DedTru Centerless Grinding Product Line Model C DedTru Grinding Fixture Model PGF Plunge Grind Fixture Model C6 DedTru Grinding Fixture Model IGF Internal Grind Fixture

More information

2008, K&M NEWSPAPER SERVICES, INC. INSERTER 2299 INSERTER

2008, K&M NEWSPAPER SERVICES, INC. INSERTER 2299 INSERTER 99 INSERTER - - - 800-88-0 COMPLETE FIXED POCKET WALL ITEM PART # DESCRIPTION QUANTITY KMS 0CW COMPLETE POCKET WALL COMES ASSEMBLED WITH YOUR CHOICE OF GRIPPERS & PADDLES - - - 800-88-0 FIXED POCKET WALL

More information

S/N 1H019H - 1H310H Page 1 of 33 46" Cutting Deck Assembly

S/N 1H019H - 1H310H Page 1 of 33 46 Cutting Deck Assembly 1180 S/N 1H019H - 1H310H Page 1 of 33 46" Cutting Deck Assembly 1180 S/N 1H019H - 1H310H Page 2 of 33 46" Cutting Deck Assembly 1 17982 1 S Reinforcement Spindle Plate 2 618-0430 1 S Spindle Assembly w/

More information

MANUAL TRANS OVERHAUL - BORG-WARNER - T56 6-SPEED MANUAL TRANSMISSIONS Borg-Warner T56 (MM6) 6-Speed

MANUAL TRANS OVERHAUL - BORG-WARNER - T56 6-SPEED MANUAL TRANSMISSIONS Borg-Warner T56 (MM6) 6-Speed IDENTIFICATION MANUAL TRANS OVERHAUL - BORG-WARNER - T56 6-SPEED 1998 MANUAL TRANSMISSIONS Borg-Warner T56 (MM6) 6-Speed Transmission has 2 identification labels, located on lower left side of case. One

More information

NOTE: Parts are no longer available for this tool. The manual will continue on the next page.

NOTE: Parts are no longer available for this tool. The manual will continue on the next page. NOTE: Parts are no longer available for this tool. The manual will continue on the next page. Form A433C Date 1-95 INSTRUCTIONS & PARTS LIST FOR SIOUX VALVE FACE GRINDING MACHINES NO. 956, 957, & 958 (SERIAL

More information

JT-SERIES TRAPEZOIDAL SCREW JACKS

JT-SERIES TRAPEZOIDAL SCREW JACKS J A C TO N I N D U S T RY C O., LT D L I F T I N G S Y S T E M S S O L U T I O N S TEL: 86-769-81585810, 81585852 SKYPE: jacjack EMAIL: sales@screwactuator.com WEB: www.screwactuator.com JT-SERIES TRAPEZOIDAL

More information

365L (2001) Page 1 of 36 54" Deck Assembly

365L (2001) Page 1 of 36 54 Deck Assembly 365L (2001) Page 1 of 36 54" Deck Assembly 365L (2001) Page 2 of 36 54" Deck Assembly 1 720-0241 1 S Wing Nut Knob 2 703-2817 1 Belt Cover LH 3 703-2816 1 Belt Cover RH 4 747-3306 1 Idler Spring Mounting

More information

Illustrated Parts List

Illustrated Parts List Illustrated Parts List 3003340 September 2011 Contents How To Use The Illustrated Parts List...3 AIR FILTER REGULATOR...4 AUXILIARY COUNTERSHAFT ASSY....5 AUXILIARY DRIVE GEAR...6 AUXILIARY MAINSHAFT ASSY...7

More information

Compatibility overview of accessories for drilling machines

Compatibility overview of accessories for drilling machines Compatibility overview of accessories for drilling machines Accessory items for drilling B13 B14 B16 B20 B25 B32 RB 6T RB 8S B17 Pro B23 Pro/Vario B26 Pro/Vario B33 Pro/Vario B16 H/Vario B24 H/Vario B28

More information

Changes in direction.! Using pulleys with belts

Changes in direction.! Using pulleys with belts Mechanisms Changes in direction! Using pulleys with belts Changes in direction! Using friction wheels Changes in direction! Using gears Worm drive! Reduces the speed! It is non-reversible Worm drive! Multiple

More information

13AU609H063 (1999) Page 1 of 25 Axle & Wheels Front And Steering Assembly

13AU609H063 (1999) Page 1 of 25 Axle & Wheels Front And Steering Assembly 13AU609H063 (1999) Page 1 of 25 Axle & Wheels Front And Steering Assembly 13AU609H063 (1999) Page 2 of 25 Axle & Wheels Front And Steering Assembly 1 683-0304 1 S Frame 2 710-0604A 1 /P Self-tapping Screw,

More information

Main Drive Components

Main Drive Components Pipe and Bolt Threading Machine Main Drive Components 0 0 0 0 Centering Head Centering Jaw Set Centering Scroll 00 Roll Pin () Internal Spiral Ring Spindle Bearing () Plug /" Plug /" () 0 Ball Valve Oiler

More information

SECTION B Manual Transaxle/Transmission TR6060

SECTION B Manual Transaxle/Transmission TR6060 308-03B-i Manual Transaxle/Transmission TR6060 308-03B-i SECTION 308-03B Manual Transaxle/Transmission TR6060 CONTENTS PAGE Transmission... 308-03B-2 308-03B-2 Manual Transaxle/Transmission TR6060 308-03B-2

More information

TABLE OF CONTENTS PART 7 - MACHINERY AND MACHINERY GUARDING

TABLE OF CONTENTS PART 7 - MACHINERY AND MACHINERY GUARDING TABLE OF CONTENTS PART 7 - MACHINERY AND MACHINERY GUARDING Page DEFINITIONS...7-1 SAFEGUARDS...7-1 GUARDING...7-2 PULLEYS, BELTS AND BELT-SHIFTERS...7-3 CONTROLS...7-3 FLYWHEELS...7-3 GRINDING WHEELS...7-3

More information

14A6816H190 GT-2150 (2003) Page 1 of 28 Carburetor

14A6816H190 GT-2150 (2003) Page 1 of 28 Carburetor 14A6816H190 GT-2150 (2003) Page 1 of 28 Carburetor 14A6816H190 GT-2150 (2003) Page 2 of 28 Carburetor TC-640221 1 /P Carburetor (Incl 184 of Engine Parts Lists) 1 TC-640216 1 Throttle Shaft & Lever Assembly

More information

Multi-Purpose Milling Machine

Multi-Purpose Milling Machine Multi-Purpose Milling Machine MF most widely used milling machine type world-wide! MF 1 speed change through v-belt change-over Multi-Purpose Milling Machine for workshops, single part production, design,

More information

S/N 1H019H - 1H310H Page 1 of 48 42" Cutting Deck Assembly

S/N 1H019H - 1H310H Page 1 of 48 42 Cutting Deck Assembly 1170 S/N 1H019H - 1H310H Page 1 of 48 42" Cutting Deck Assembly 1170 S/N 1H019H - 1H310H Page 2 of 48 42" Cutting Deck Assembly 4 683-0254 1 S Deck Adjustment Bracket w/ Weld Nut 9 710-0528 1 /P Hex Cap

More information

WOODWORKING MACHINERY

WOODWORKING MACHINERY PRICE LIST NO. 56 Applying to the Complete Line of WOODWORKING MACHINERY SUPERSEDING AND CANCELLING ALL PREVIOUS ISSUES SUBJECT TO CHANGE WITHOUT NOTICE EFFECTIVE AUGUST 1, 2005 Over 84 Years of Continuous

More information

SPAREPARTSCATALOG: // ENGINE 390 DUKE 2015 ART.-NR.: 3CM081270OEN

SPAREPARTSCATALOG: // ENGINE 390 DUKE 2015 ART.-NR.: 3CM081270OEN SPAREPARTSCATALOG: // ENGINE ART.-NR.: 3CM08270OEN CONTENT ENGINE CASE CLUTCH COVER 3 CRANKSHAFT, PISTON BALANCER SHAFT 4 CLUTCH 7 SHIFTING MECHANISM 5 TRANSMISSION I - MAIN SHAFT 8 WATER PUMP CYLINDER

More information

90 Utility Model Number A2013KUB2BUSZ SHARE OUR PASSION.

90 Utility Model Number A2013KUB2BUSZ SHARE OUR PASSION. 2013 90 Utility Model Number A2013KUB2BUSZ TM SHARE OUR PASSION. TABLE OF CONTENTS 2013 ATV 90 (Model No. A2013KUB2BUSZ) BODY PANEL AND HEADLIGHT ASSEMBLY... 1 FRONT AND REAR RACK ASSEMBLY... 2 FRAME AND

More information

EGH-1880, ELITE 18X80 LARGE SPINDLE BORE CLUTCH LATHE

EGH-1880, ELITE 18X80 LARGE SPINDLE BORE CLUTCH LATHE When precision matters the most. The large spindle bore Elite lathes are the signature machines within the Elite lathe lineup. Engineered to meet world-class tolerances for spindle run out, bed alignment,

More information

Fluid Power The Fluid Power Equipment and Services Division has sources of supply for most brands of FP equipment. Manufacturers

Fluid Power The Fluid Power Equipment and Services Division has sources of supply for most brands of FP equipment. Manufacturers IMPORTADORA ARAYA Y COMPAÑÍA S.A. Cedula Jurídica: 3-101-08833 Tel: (506)2241-6293, (506)2297-2098 Fax: (506) 2297-1971 ventas@imparayaycia.com - www.imparayaycia.com Fluid Power The Fluid Power Equipment

More information

Craftsman Snow Thrower Model PARTS LIST

Craftsman Snow Thrower Model PARTS LIST Craftsman Snow Thrower Model 24.881900 PARTS LIST 11 13 3 2 24 9 1 18 4 2 1 20 23 1 14 1 9 2 4 4 4 3 28 8 3 4 3 39 0 3 43 38 2 48 2 42 1 41 40 49 4 44 31 4 31 21 29 34 9 19 10 32 22 2 Craftsman Snow Thrower

More information

Replacement parts to fit FORD ALPHABETICAL INDEX

Replacement parts to fit FORD ALPHABETICAL INDEX ALPHABETICAL INDEX A Adaptor, Hydraulic, 247, 249 to 250 Adaptor, PTO Shaft, 210 Air Cleaner, 157 to 158 Bowl, 157 Door, 273 Gasket, 159 Hose, 159 Spring, 158 Tube, 158 Air Conditioning Compressors, 282

More information

COUPLINGS HRC FLEXIBLE COUPLINGS CHAIN SHAFT COUPLINGS SPLINE CLUTCHES TORQUE LIMITERS TORQUE LIMITER COUPLINGS

COUPLINGS HRC FLEXIBLE COUPLINGS CHAIN SHAFT COUPLINGS SPLINE CLUTCHES TORQUE LIMITERS TORQUE LIMITER COUPLINGS COUPLINGS HRC FLEXIBLE COUPLINGS CHAIN SHAFT COUPLINGS SPLINE CLUTCHES TORQUE LIMITERS TORQUE LIMITER COUPLINGS FLEXIBLE COUPLINGS HRC TYPE Hercus HRC Couplings are designed for general-purpose applications

More information

Suggested Spares Guide

Suggested Spares Guide Suggested Spares Guide 380 Side Feed Baler Module 14, 15, 16 Chambers A Product of Sherwood, Oregon USA Rev: 11-2013 Section 1 - Front End HTH0021097 Hitch 1 HTH0031000 Hitch Ball W/Nut & Washer 1 F000000440

More information

HC-450. Main Components. Hole Cutting Tool. NOTE: Order parts by Catalog Number only. DO NOT order by Reference Number. 1/12

HC-450. Main Components. Hole Cutting Tool. NOTE: Order parts by Catalog Number only. DO NOT order by Reference Number. 1/12 Hole Cutting Tool HC-0 Main Components Gib Screw () Warning Label 0 Screw, #0- x /" Lock Washer #0 0 Ground Spacer 0 Pinion () 0 Bearing () Split Roll Pin /" x "() Roll Pin, /" x /" () 0 0 Feed Shaft,

More information

Surface Grinder ESG 618 E X18 Manually Operated. Features: Included as standard:

Surface Grinder ESG 618 E X18 Manually Operated. Features: Included as standard: Surface Grinder ESG 618 E 1-500-100 Features: Robust cast iron construction Easy and quick to set up which saves time Precision built for accuracy Mass produced and economically priced Ball bearing ways

More information

FSG-1224ADII/1632ADII /1640ADII AUTOMATIC PRECISION SURFACE GRINDING MACHINE

FSG-1224ADII/1632ADII /1640ADII AUTOMATIC PRECISION SURFACE GRINDING MACHINE FSG-1224ADII/1632ADII /1640ADII AUTOMATIC PRECISION SURFACE GRINDING MACHINE F S G - 1 2 / 1 6 A D 1 FEATURES AUTOMATIC PRECISION SURFAC FSG-1224ADII 1632ADII 1640ADII AUTOMATIC PRECISION SURFACE GRINDING

More information

Spare part list AutoCUT 500. Pos. No. Article no. Description pc Feed unit complete 1

Spare part list AutoCUT 500. Pos. No. Article no. Description pc Feed unit complete 1 AutoCUT 500 Article no. Description pc 1 8020901 Feed unit complete 1 2 8020911 Mill unit 1 3 8020921 Steering mechnism complete 1 4 8020861 Coasting rail complete 1 5 8020871 Intake rail complete 1 6

More information

B B B

B B B FIG CYLINDER Suzuki Worldwide Motorcycle-ATV Page: of -0B00-00 0-00 0-000 0-00 0-0B0-0B0 0-0 0-0 Head, Cylinder Gasket, Cylinder Head Spark Plug (ngk,bphs) Spark Plug (nd,wfp-u) Cylinder Gasket, Cylinder

More information

Terraplane Hudson Six Hudson Eight FRONT AXLE

Terraplane Hudson Six Hudson Eight FRONT AXLE 1936 Service Information and Adjustments Terraplane Terraplane Hudson Hudson 8 Hudson 8 Hudson 8 Hudson 8 Deluxe Custom Six Deluxe Custom Deluxe Custom ( 115 WB) (115 WB) (120 WB) (120 W B) (120 WB) (127

More information

DVX 90 MODEL NUMBER A2008KSB2BUSD (BLACK-RED) MODEL NUMBER A2008KSB2BUSE (BLACK-CAT GREEN) MORE TO GO ON. TM

DVX 90 MODEL NUMBER A2008KSB2BUSD (BLACK-RED) MODEL NUMBER A2008KSB2BUSE (BLACK-CAT GREEN) MORE TO GO ON. TM 2008 DVX 90 Illustrated Parts Manual MODEL NUMBER A2008KSB2BUSD (BLACK-RED) MODEL NUMBER A2008KSB2BUSE (BLACK-CAT GREEN) MORE TO GO ON. TM TABLE OF CONTENTS Black-Red (Model No. A2008KSB2BUSD) Black-Cat

More information

RTM 351. Crankshaft grinder. BERCO S.p.A. A Company of ThyssenKrupp Technologies

RTM 351. Crankshaft grinder. BERCO S.p.A. A Company of ThyssenKrupp Technologies RTM 351 Crankshaft grinder A Company of ThyssenKrupp Technologies BERCO S.p.A. The machine and its executions The RTM351 Crankshaft Grinder, conceived and realized according to highly innovatory criteria,

More information

HORSE III 8HP ROTO TILLER (S/N ) Page 1 of 25 Bolo Tine Assemblies

HORSE III 8HP ROTO TILLER (S/N ) Page 1 of 25 Bolo Tine Assemblies HORSE III 8HP ROTO TILLER (S/N 640000-855638) Page 1 of 25 Bolo Tine Assemblies HORSE III 8HP ROTO TILLER (S/N 640000-855638) Page 2 of 25 Bolo Tine Assemblies 1 GW-2415 2 S/F TINE HOLDER- welded steel.

More information

X4 (GREEN) (A2000ATF2AUSG) Page 1 of 80 AIR INTAKE ASSEMBLY

X4 (GREEN) (A2000ATF2AUSG) Page 1 of 80 AIR INTAKE ASSEMBLY 2000 300 2X4 (GREEN) (A2000ATF2AUSG) Page 1 of 80 AIR INTAKE ASSEMBLY 2000 300 2X4 (GREEN) (A2000ATF2AUSG) Page 2 of 80 AIR INTAKE ASSEMBLY Ref # Part Number Qty S/P/F Description 1 3570-001 1 /P Intake,

More information

Unison Corporation. DedTru Centerless Grinding Product Line

Unison Corporation. DedTru Centerless Grinding Product Line Price List PL Unison Corporation DedTru Centerless Grinding Product Line Model C DedTru Grinding Fixture Model PGF Plunge Grind Fixture Model IGF Internal Grind Fixture Model C6 DedTru Grinding Fixture

More information

phone

phone AS-035508 Pinion Housing AS-035511 AS-035512 AS-040502 AS-040504 Locknut sliding block fountain AS-053111 Cam Follower AS-082220 Lockwasher AS-085015 AS-087459 Idler Gear AS-1001705 Nylon Tip Set Screw

More information

SADDLE TYPE MANUAL FEATURES: SADDLE TYPE FEATURES:

SADDLE TYPE MANUAL FEATURES: SADDLE TYPE FEATURES: SADDLE TYPE MANUAL FEATURES: Meehanite cast iron of base, column, saddle, and table provides greater rigidity and highest possible grinding load capacity Ball bearing slideways resist damage due to impact

More information

DAKE / JOHNSON VERTICAL BAND SAW

DAKE / JOHNSON VERTICAL BAND SAW DAKE / JOHNSON VERTICAL BAND SAW Model F - 6 INSTRUCTION MANUAL MODEL:F-6 SERIAL NUMBER: DATE PURCHASED: Need band saw blades? Call Dake DAKE (Division of JSJ) 724 Robbins Road Grand Haven, Michigan 4947

More information

SERVICE PARTS LIST 1-1/8" ROTARY HAMMER MILWAUKEE ELECTRIC TOOL CORPORATION W. LISBON RD., BROOKFIELD, WI Drwg.

SERVICE PARTS LIST 1-1/8 ROTARY HAMMER MILWAUKEE ELECTRIC TOOL CORPORATION W. LISBON RD., BROOKFIELD, WI Drwg. 00 0 200 204 276 EXAMPLE: Component Parts (Small #) Are Included When Ordering The Assembly (Large #). SERVICE PARTS LIST SPECIFY CATALOG NO. AND SERIAL NO. WHEN ORDERING PARTS PAGE 1 OF 3 BULLETIN NO.

More information