Vertical Grinding Center FVGC-II

Transcription

1 Vertical Grinding Center

2 DIMENSIONL DRWINGS C ITEM 110 (2800mm) 3.54 (90mm) C 106 (2700mm) D 87.8 (2230mm) E 59 (1500mm) F (3730mm) Note: The manufacturer reserves the right to modify the design, specifications, mechanisms... etc. of the machine without prior notice. ll the specifications shown above are just for reference. CT: C00 / / 1000 P \ ll Rights Reserved, rch-studio Ver1.0 P1 D E F U.S.. OFFICE No. 34, Hsing Kong Road, Shang Kang, Chang Hua TIWN 509 TEL: FX: overseas@chevalier.com.tw T-Y Factory TEL: Tabor Place Santa Fe Springs, C U.S. TEL:(562) FX:(562)

3 Description Table 4 Table Size T-Solts(no. x W x dis.) Table Load Travel X Travel Y Travel Z Travel Spindle Spindle Nose to Table Spindle Center to Column 47.2 x20 (1200x510 mm) 5 x0.709 x3.937 (5x18 mmx100 mm) 1320 Ibs (600kg) 31.5 (800 mm) 18.5 (470 mm) 20.1 (510 mm) 5.9 ~26 (150~660 mm) 22.4 (570 mm) Spindle Taper 7/24(#40) Spindle Speed Spindle Diameter Feed Rates Rapid on(x/y/z)xes Cutting Feed Rate Diameter & Pitch of ballscrew Directly Coupled: 12000rpm/(Opt.)15000rpm 2.8 (70mm) 1180/1180/787 IPM(30/30/20 m/min.) 0.04~394 IPM(1~1000 mm/min) 40mm, P10 ccuracy VDI 3441 Positioning Repeatability Tool & Wheel Changer Wheel Capacity P ±0.005 mm PS ±0.003 mm 8 Pcs, ø6.5 (ø165mm) Tool Capacity rm : 24 Changing Time Tool Shank Pull Stud Max. Tool Diameter Max. Tool Length Max. Tool Weight Motor Spindle Motor Drive Motor (X, Y, Z) Coolant Pump General Power Required ir Required Floor Space (WxDxH) Machine Net Weight, approx SPECIFICTION rm : T-T 1.8 sec, C-C 3 sec T40 P40T-1 24 station cam-arm type 3 (80 mm) 7 (177 mm) 15 Ibs(7kg) 7.5/11kw (10HP/15HP) 3.0/3.0/4.0kW 1HP, 1.8 ar, 132 L/min 25KV 5.5kg/cm 2, 200L/min 110 x147 x106 (2800x3730x2700mm) Ibs(6500kg) CNC Standard Features 1. Fanuc control 2. Remote type manual pulse generator (MPG) 3. Rigid tapping Standard ccessory Station arm type TC 2. Coolant system 3. Fully enclosed splash guard 4. Work light 5. Central lubrication system 6. Pilot light 7. Spindle air blast 8. Rear chip flash system 9. ir blast chip blower(cutting air blast) 10.ir purge curtain 11.Spindle oil cooler device 12.ir conditioned electric cabinet 13.Oil skimmer 14.Oil mist collector 15.X,Y axis guideway with multi-protection 16.X,Y axis ballscrew with multi-protection 17.Table splash guard 18.Fully enclosed guarding ststem for TC 19.Curtain type coolant system 20.Coolant gun 21.Tools & tool box 22.Leveling bolts and pads 23.Operation manual & parts list Optional ccessory 1. T40 or CT40 or DIN-40, JT-40 pull sutds 2. Directly coupled :15000rpm spindle 3. Coolant through spindle (20ar) 5. Oil cooler for coolant system 6. Dust collector 7. 4 th axis preparation 8. 4 th axis complete set ø255mm 9.Table mount disc dresser 10.X, Y, Z axis Linear scales Note: The manufacturer reserves the right to modify the design, specifications, mechanisms... etc. of the machine without prior notice. ll the specifications shown above are just for reference.

4 MCHINE CONSTRUCTION 3 with gringing wheels l Capacity: heel: 8pcs, ø6.5 (ø165mm) ool: 24pcs, ø3 (ø76mm) x. Tool Length: 10 (250mm) indle with air purge design to protect eign material from flying into the spindle, s the lift time of the spindle will be ended to maximum. Coolant mist collector Coolant mist can be taken out rapidly. Table mount diamond disc dresser(opt.) Grinding wheel can be dressed in various form shape by using this device. ir conditioned electrical cabinet Efficiently eliminate the heat from inside the electrical cabinet, keeping the cabinet clean and dry, results a stable and reliable electrical components, prolong the longevity of electrical system. Rear chip flushing flow device Two pumps with large volume flow have been installed in the rear side of machine for carrying chip to the chip collecting area. Storage cabinet vailable for storaging various manuals or other useful reference books or tools. ection w. Drum-Type coolant system with paper filter(opt.) Drum type coolant system, which require very small space is used for second filtration. The flow rate is 200L/min, tank capacity is 470L, width of paper is 27.5 (700mm), accuracy of filter paper is (30µm), There are two can type filters for third filtration, one for coolant nozzle and the other one for coolant curtain.

5 C - I I d i n g C e n t e r MCHINE CONSTRUCTION Fully enclosed rm type tool change System 3 TC Too 1.W 2.T Ma Sp for thu ext The automatic door for.t.c. is designed to protect tool magazine from cutting chip and grinding dust to ensure the grinding and cutting accuracy. The TC door will automatically open for tool or grinding wheel change. When the tool and grinding wheel changing 4 proecss is completed, the door will close automatically. Two M codes have been assigned for Manual operation of door opening and closing. 4 ash guard for collecting most hips, and than lead those is is to protect the machine eated by chips. X,Y axis ballscrew with multi-prot X,Y,Z axis with special sealed type ballscre X,Y, axis ballscrew with protection cover.

6 1 MCHINE CONSTRUCTION F V G V e r t i c a l G r i n With long experience in designing and manufacturing Grinding Machines and Machining Centers,CHEVLIER has developed this Vertical Grinding Center to meet current and future grinding and chip cutting requirements. The pplication For Punch mould industry Ceramic and Quartz industry erospace industry and medical instrument industry Graphite industry(wet machining) Graphite industry(dry machining) Cam plate and shape machining industry Many other applications Spindle Speed Direct Drive 12000rpm/ 15000rpm(option) Rapid on (X/Y/Z) xes 1180/1180/787 IPM (30/30/20 m/min) 1 Note : Machine shown with optional accessories 1 Table splash guard Specially designed table spl of the grinding and cutting c chips to the coolant tank, Th from the possible damage cr