JET FINISHING. Surface Grinders Bench Grinders Accessories

Size: px
Start display at page:

Download "JET FINISHING. Surface Grinders Bench Grinders Accessories"

Transcription

1 JET FINISHING Surface Grinders Bench Grinders Accessories

2 6"x18" PRECISION MANUAL SURFACE GRINDER FINISHING 6"x18" PRECISION MANUAL SURFACE GRINDER Base, saddle, table and column feature high quality cast iron Table action by cogged timing belt system Table travels on precision roller balls Double V roller tracks are over 19 inches apart Over 300 pound capacity on table Motor is dynamically balanced allowing spindle run-out within.0008" 24V controls feature overload protection Automatic continuous lubrication of table ways Adjustable longitudinal table stops and cross feed lock are featured Cabinet stand allows tool storage area Complete coolant system Balancing arbor Halogen work lamp Grinding wheel Wheel flange Diamond wheel dresser Leveling blocks Wheel extracting screw Tool box JET FINISHING OPTIONAL EQUIPMENT 6x12 Magnetic Chuck x18 Magnetic Chuck Overhead diamond wheel dresser Rotary Phase converter NOTE: Use of static phase converter will void warranty Model Number JPSG-618M1 Table Size (in.) 6 x 18 Grinding Capacity (in./w x L) 7 x 19 T-slots, (Number) Size (in.) (1) 9/16 Longitudinal Table Travel (max./in.) 20 Cross Table Travel (max./in.) 7-3/4 Cross Handwheel Graduation (in.).0005 Cross Handwheel per Revolution (in.).02 Spindle Centerline to Table (max./in.) 18 Vertical Handwheel Graduation (in.).0001 Vertical per Handwheel Revolution (in.).05 Spindle Speed (RPM) 3,450 Wheel Diameter (max./in.) 8 Wheel Thickness (max./in.) 3/4 Wheel Center Bore (in.) 1-1/4 Motor 2HP, 230/460V, 3Ph Prewired 230V Overall Dimensions (in./w x D x H) 74 x 45 x 68 Net Weight (lbs.) jettools.com

3 FINISHING PRECISION AUTOMATIC SURFACE GRINDERS PRECISION AUTOMATIC SURFACE GRINDERS Base, saddle, table and column feature high quality cast iron Fully automatic operation in 3-axis Vertical feed features hydraulic 3-step selection Rapid vertical motor increases work efficiency Slide ways are hand scraped and Turcite coated allowing smooth operation Spindle incorporates (4) class 7 bearing for high accuracy Automatic continuous lubrication system with low oil warning lamp Hydraulic tank features a heat exchanger to maintain operating temperature Low voltage controls include overload protection Convenient central control panel includes all buttons and switches Model Number JPSG-1020A JPSG-1224A Table Size (in.) 8 x x 24 Grinding Capacity (in./w x L) 8-1/4 x 21-5/8 12-3/16 x 25-1/2 T-slots, (Number) Size (in.) (1) 1/2 (1) 1/2 Maximim Table Load (lbs.) Longitudinal Manual Table Travel (max./in.) Longitudinal Auto. Table Travel (max./in.) 22-3/8 25-9/16 Longitudinal Table Speed (FPM) Cross Table Travel (in.) 8-13/ /16 Cross Handwheel Graduation (in.) Cross Handwheel per Revolution (in.).2.2 Cross Feed per Auto. Pass (in.) Spindle Centerline to Table (max./in.) 16-5/16 20 Vertical Handwheel Graduation (in.) JET FINISHING Electromagnetic chuck Complete coolant and dust collection system Hydraulic motor and pump Wheel balancing base Halogen work lamp Balancing arbor Grinding wheel Wheel flange Diamond wheel dresser Leveling blocks Wheel extractor Tool box jettools.com OPTIONAL EQUIPMENT Rotary Phase converter NOTE: Use of static phase converter will void warranty. Vertical per Handwheel Revolution (in.) Auto. Vertical Downfeed Steps (in.).00008,.00024, ,.00024,.0004 Wheel Diameter (max./in.) 8 12 Wheel Thickness (max./in.) 3/4 1-1/4 Wheel Center Bore (in.) 1-1/4 3 Spindle Speed (RPM) 3,450 1,725 Cross Feed Motor 1/5HP 1/5HP Elevating Motor 1/4HP 1/4HP Hydraulic Motor 1HP 2HP Main Motor (TEFC) 2HP, 230/460V, 3Ph, prewired 230V 3HP, 230/460V, 3Ph, prewired 230V Overall Dimensions (in./w x D x H) 100 x 62 x x 76 x 89 Net Weight (lbs.)

4 FINISHING ACCESSORIES AND BENCH GRINDERS FINISHING MAGNETIC CHUCKS Holds workpiece securely by means of a strong magnetic field Standard pole pattern for general purpose uses Magnetic pull can be switched on/off by means of a single lever Model Number JMC-612 JMC-618 Surface Diameter (in.) 6 x 12 6 x 18 Pole Size (in.) 15/32 15/32 Overall Dimensions (in./lxwxh) 12-5/8 x 6-1/4 x 2-3/4 18-1/2 x 6-1/4 x 2-3/4 Net Weight (lbs.) OVERHEAD DIAMOND DRESSER Specially designed for JPSG-618M Allows wheel dressing with work piece in place Mounts to preexisting holes Includes diamond JET FINISHING BENCH GRINDER STAND Heavy-duty cast iron construction provides strength and durability Wide stance base gives you a stable grinder workstation Coolant tank and tool tray are on an adjustable platform for your convenience Model Number BENCH GRINDERS JPS-2A Mounting Surface (L x W/in.) 11 x 10 Overall Height (in.) 31 Net Weight (lbs.) 46 Cast iron motor housing and totally enclosed permanently lubricated ball bearings ensure longer life Steel tool rests adjust to accommodate your needs Adjustable acrylic eye shields deflect sparks away from operator Gooseneck light fixture illuminates your work for better results Includes one fine and one coarse vitrified grinding wheel for grinding and sharpening tasks Model Number JBG-150 JBG-200 Shaft Diameter (in.) 1/2 5/8 Wheel Dimensions (in./dia.xw) 6 x 3/4 8 x 3/4 Wheel Speed (RPM) 3,450 3,450 Wheel Grits 36/60 36/60 Motor 1/3HP, 1Ph, 115V 1/2HP, 1Ph, 115V Overall Dimensions (in./l x W x H) 17 x 8 x 10-1/2 17-1/4 x 9 x 11-1/2 Net Weight (lbs.) jettools.com

5 FINISHING INDUSTRIAL BENCH GRINDERS AND WHEELS INDUSTRIAL BENCH GRINDERS UL Listed Totally enclosed, pre-lubricated ball bearings Heavy-duty guarded toggle switch on 8" and 10" Rubber mounts prevent movement Cast iron wheel guards and dust vents One-piece quick adjusting spark guards Large eye shields with quick adjustment Adjustable tool rests Fine and coarse vitrified grinding wheels included Model Number JBG-6A JBG-8A JBG-10A Shaft Diameter (in.) 1/2 5/8 1 Wheel Diameter (in./dia.xw) 6 x 3/4 8 x 1 10 x 1 Wheel Speed (RPM) 3,450 3,450 1,725 Wheel Grits 36/60 36/60 24/46 Motor 1/2HP, 1Ph, 115V 1HP, 1Ph, 115V 1-1/2HP, 1Ph,115V Overall Dimensions (in./lxwxh) 18 x 8-1/2 x 10-1/2 19 x 10 x 12-1/2 24-1/2 x 13 x 12-1/4 Net Weight (lbs.) See WILTON Bench Grinders on page 288 WIRE WHEEL BRUSHES Premium-duty, high-density crimped wire for superior performances Low flexibility, fast cutting, long life Excellent for cleaning operations and for surface finishing Multi-bore brushes come standard with (2) 1/2", (1) 5/8", (1) 3/4", (1) 7/8" set of bushings (W10-14 has 1" bore only) MODEL DIAMETER (IN.) FACE (W/ IN.) WIRE GAUGE MAXIMUM RPM W / W JET FINISHING W W DRILL AND TOOL SHARPENING WHEELS Wheels have Type 1 white aluminum-oxide grain and vitrified bond for sharpening drill bits and other tools All wheels include telescoping bushings for 1/2", 5/8", 3/4", or 1" diameter shafts. SIZE (DIA. X THICKNESS/IN.) GRIT MAXIMUM RPM x 3/4 AA46Q5V x 3/4 AA60Q5V x 1 AA46Q5V x 1 AA460Q5V x 1 AA46Q5V x 1 AA60Q5V 3600 jettools.com 123

6 GRINDING WHEELS FINISHING BENCH GRINDING WHEELS Industrial-quality wheels have aluminum-oxide grain and vitrified bond for use on all types of ferrous metals All wheels include telescoping bushings for 1/2", 5/8", 3/4", or 1" diameter shafts SIZE (DIA. X THICKNESS/ IN.) GRIT MAXIMUM RPM x 3/4 A24Q5V x 3/4 A36Q5V x 3/4 A46Q5V x 3/4 A60Q5V x 1 A24Q5V x 1 A36Q5V x 1 A46Q5V x 1 A60Q5V x 3/4 A24Q5V x 3/4 A36Q5V x 3/4 A46Q5V x 3/4 A60Q5V x 1 A24Q5V x 1 A36Q5V x 1 A46Q5V x 1 A60Q5V x 1 A24Q5V x 1 A36Q5V x 1 A46Q5V x 1 A60Q5V 2483 CARBIDE BENCH GRINDING WHEELS JET FINISHING For sharpening carbide tools Green silicon carbide Type 1, vitrified bond Available in the following grits: GC60/Coarse; C80/Medium; GC100/ Medium Fine; GC120/Fine Wheels 1" thick or less include telescopic bushings for 1/", 5/8" 3/4", or 1" diameter shafts SIZE (DIA. X THICKNESS/IN.) GRIT MAXIMUM RPM x 3/4 GC60J5V x 3/4 GC80J5V x 3/4 GC100J5V x 3/4 GC120J5V x 1 GC60J5V x 1 GC80J5V x 1 GC100J5V x 1 GC120J5V x 1 GC60J5V x 1 GC80J5V x 1 GC100J5V x 1 GC120J5V x 1 GC60J5V x 1 GC80J5V x 1 GC100J5V x 1 GC120J5V jettools.com

7 Belt Grinders Belt, Disc, and Chamfering Machines Dust Collector

8 SQUARE WHEEL BELT GRINDER FINISHING SQUARE WHEEL BELT GRINDER FLAT & ANGULAR Platen setting is the perfect angle for high speed, precison flat and level grinding SHAPING For grinding and refinishing cylindrical shapes yoke surface conforms to the shape of the surface to produce an even, smooth finish. ROUGHING Serrated contact wheel is used for removing heavy stock, cleaning up a weld or snagging a casting CONTOURING Grind difficult to reach areas with the 3"x2" or 1-1/2"x2" diameter contact wheels 4103 Belt Size (in./ W x L) 2 x 72 Belt Speed (SFPM) 4600 Contact Wheel (in.) 8 Contact Wheel Durometer 70 Motor Overall Dimensions (in./w x D x H) 1HP, 115/230V, 1Ph 17 x 31 x 17 Net Weight (lbs.) 115 OPTIONAL EQUIPMENT Special Finishing Attachment Hub and Wheel Assembly Buffing Pads for use with the Hub and Wheel Assembly (Includes 5 pads) Nylon Polishing Wheel for use with the Hub and Wheel Assembly (Includes Bear Tex Wheel and spacer plate) Hub & Wheel Assembly includes hub, collar, v-belt and wrench for easy change Small Wheel Assembly fits all units, includes 5/8, 70 durometer contact wheel (additional wheels available) /2" Contact Wheel /8" Contact Wheel /4" Contact Wheel " Contact Wheel " Contact Wheel Assembly, serrated, 50 durometer " Contact Wheel Assembly, smooth, 50 durometer " Contact Wheel Assembly, serrated, 90 durometer Cabinet Dust Collector, with 115/230V, 1.2HP, TEFC motor Scoop and Hose Kit includes scoop kit, hose flange, hose and hose clamps (required to connect square wheel to stock number Pedestal Floor Stand REPLACEMENT BELTS " x 72" / 36 Grit Abrasive Belt " x 72" / 50 Grit Abrasive Belt " x 72" / 80 Grit Abrasive Belt " x 72" / 120 Grit Abrasive Belt " x 72" / 60 Grit Abrasive Belt " x 72" / 180 Grit Abrasive Belt " x 72" / 220 Grit Abrasive Belt 126

9 FINISHING SQUARE WHEEL BELT GRINDER AND DUST COLLECTOR VARIABLE SPEED SQUARE WHEEL BELT GRINDER Infinitely Variable Speeds 100 to 6000 sfpm Latest AC Inverter Variable Speed technology Continuous speed adjustment while in operation East to view sfpm readout 4126AC Belt Size (in./w x L) 2 x 72 Belt Speed (SFPM) 1100 to 6000 Contact Wheel (in.) 8 Contact Wheel Durometer 70 Motor 1HP, 115V, 1Ph, AC Inverter New Weight (lbs.) 163 OPTIONAL EQUIPMENT Wire Wheel Brush; 6" Dia. 9" (Carbon) DUST COLLECTORS AND ACCESSORIES Non-sparking aluminum housing and fan blade Easy to empty clean-out drawer Easy to change air filter Recirculates cleaned air Quiet, effective dust collection using the cyclone method Meets OSHA health and safety recommendations Furnished with 12"x16"x1" dust filter Sound absorption ring is mounted between the motor housing and cabinet to ensure quiet operation Housing and blade are made of rust-resistant, non-sparking cast aluminum Radial blade is self cleaning Maximum CFM 500 Maximum Hose Velocity (SFPM) 5000 Filter (in./w x L x D) 12 x 16 x 1 Filter Efficiency 1 micron 5' 72 Hose Size (in./w x L) 3 x 60 Motor 1/2HP,115/230V, 1Ph Overall Dimensions (in./w x D x H) 16 x 24 x 32 Net Weight (lbs.) OPTIONAL EQUIPMENT Scoop & Hose Kit for Square Wheel Grinders INCLUDES Scoop kit, hose flange, hose & clamps 127

10 1"x42" BENCH BELT AND DISC SANDER FINISHING 1" X 42" BENCH BELT AND DISC SANDER Hinged idler wheel cover Power take off, allows for mounting an optional flex shaft, can be used for carving, drum sanding, deburring and dozens of other jobs Deluxe miter gauge turns and locks for common angles 45 left and right Abrasive belt unit does the work of a jig saw, coping saw or hand file while removing material and finishing at the same time, allows the operator to get into small openings, plus handle odd shapes and angles Removable platen allows for sanding, grinding or finishing of outside curves or odd shaped work pieces on the belt Grind, sand, or finish large work pieces on the disc unit fast and efficiently; combined with the tilting table, the operator can chamfer or bevel, table is slotted to accept miter gauge Delivers sharper, faster cutting actions; easy belt changes, and a variety of grit belts, keeps the machine cool, so one can complete a wide range of jobs When using non-woven synthetic belts the operator can blend, polish, buff or finish metal surfaces in addition to defuzzing wood surfaces Deluxe miter gauge Cast iron tilting table Cast construction Heavy duty steel base and rubber feet Removable platen Adjustable dust deflector and dust chute B. A Overall Dimensions (in./w x D x H) 15 x 24-1/2 x 19-1/2 Belt Size (in./w x L) 1 x 42 Belt Speed (SFPM) 3000 Belt Table Size (in.) 6 1/8 x 7 1/8 Belt and Disc Table Tilt OPTIONAL EQUIPMENT A. Flexible Shaft B. Sanding Drum and Sleeve Set REPLACEMENT BELTS 1x42 ALUMINUM OXIDE 50 Grit Grit Grit " DIAMETER ALUMINUM OXIDE DISC 45 Out Disc Diameter (in.) 8 Disc Speed (RPM) 1725 Disc Table Size (in.) 4 x 10 Dust Collection Outlet (in.) Motor 1-1/2 Diameter 1/3HP, 115V, 1Ph Machine Dimensions (in./w x D x H) 21 x 22 x 14 Net Weight (lbs.) Grit Grit

11 FINISHING 2"x42" BENCH BELT AND DISC SANDER Overall Dimensions (in./w x D x H) 20-1/2x22-3/4x20 Belt Size (in./w x L) 2 x 42 Belt Speed (SFPM) 3100 Belt Table Size (in./l x W) 10 x 6 Belt and Disc Table Tilt 0 to 45 Disc Diameter (in.) 8 Disc Speed (RPM) 3450 Disc Table Size (in./l xw) 10-3/4 x 7-1/2 Dust Collection Outlet (in.) 1-1/2 Motor 3/4HP, 1Ph, 115V Machine Dimensions (in./w x D x H) 20-1/2 x 22-3/4 x 20 Net Weight (lbs.) 69 2"x42" BENCH BELT AND DISC SANDER Deluxe miter gauge that turns and locks for common angles 45º both left and right Hinged idler wheel cover Abrasive belt unit does the work of a jig saw, coping saw or hand file while removing material and finishing at the same time, allows the operator to get into small openings, plus handle odd shapes and angles Allows for sanding, grinding or finishing of outside, curves or odd shaped work pieces on the belt Grind, sand or finish large work pieces on the disc unit fast and efficiently; combined with the tilting table, the operator has the advantage of chamfering or beveling, table is slotted to accept miter gauge Delivers sharper, faster cutting action; easy belt changes with a variety of grit belts, keeps the machine cool, so one can complete a wide range of jobs When using non-woven synthetic belts the operator can blend, polish, buff or finish metal surfaces in addition to defuzzing wood surfaces Deluxe miter gauge Cast iron tilting table Cast construction Heavy duty steel base and rubber feet Removable platen Dust deflector and chute 129

12 COMBINATION BELT AND DISC FINISHING MACHINE FINISHING COMBINATION BELT AND DISC FINISHING MACHINE 6" x 48" Belt 10" Disc Two cast iron tilting tables for mitering applications Full access to the belt when tilted in the horizontal position Dust collection shrouds on belt and disc Quick-release tension mechanism makes belt changes quick and easy Removable safety key switch Enclosed base protects motor from sanding dust Floor stand included (some assembly required) Miter gauge Heavy-duty one piece steel stand 4210K BELT SPECIFICATIONS Belt Size (in./w x L) 6 x 48 Belt Speed (SFPM) 1650 Belt Table Size (in./w x L) 6 x 10-1/2 DISC SPECIFICATIONS Disc Size (in.) 10 Disc Speed (RPM) 2100 Disc Table Size (in.) 7-1/2 x 13 Table Slots (in.) 5/8 Table Tilt 45 Out Motor 1HP, 115V, 1Ph Overall Dimensions (in./w x D x H) 23 x 26 x 61 Net Weight (lbs.)

13 INDUSTRIAL COMBINATION BELT AND DISC FINISHING MACHINE INDUSTRIAL COMBINATION BELT AND DISC FINISHING MACHINE Belt operates at any angle Powered by a heavy-duty, UL/CSA approved, 1-1/2 HP TEFC motor Contour finishing, mitering, flat finishing, beveling and precision finishing Plain and compound miters are easily obtained by using the standard die cast aluminum miter gauge Fully machined, balanced disc runs vibration free Adjustable heavy duty, cast iron, removable platen Removable upper guard for contour finishing Variable-position locks; belt head adjusts vertically, horizontally and in-between Large cast iron slotted table Adjustable dust deflector and dust chute Completely enclosed drums and a guarded sanding belt Heavy-duty, one-piece steel stand BELT SPECIFICATIONS 4200A/4200A-2/4202A Belt Size (in./w x L) 6 x 48 Belt Speed (SFPM) 2850 Belt Table Size (in.) 7-3/8 x 14-3/4 Belt Table Tilt 45 Out, 20 In Platen (in./w x L) 6-1/4 x 14-3/4 Miter Gauge Groove (in.) 3/8 x 3/4 DISC SPECIFICATIONS Disc Size (in.) 12 Disc Speed (RPM) 1960 Disc Table Size (in./w x L) 12 x 16-3/8 Disc Table Tilt 45 Out, 20 In Miter Gauge Groove (in.) 3/8 x 3/4 Motor 4200A Motor 4200A-2 Motor 4202A Overall Dimensions (in./w x D x H) 1-1/2HP, 115V, 1Ph 1-1/2HP, 230V, 1Ph 1-1/2HP, 230V, 3Ph 25-1/2 x 19 x 57-1/2 New Weight (lbs.) 250 OPTIONAL EQUIPMENT " Abrasive Disc, 50 Grit " x 48" Abrasive Belt, 80 Grit Cabinet Dust Collector, includes filter and TEFC 115/220V, 1/2HP motor Hose Kit includes cast funnel attachment, 2pcs 5' high temperature hose & 4 clamps 131

14 6" BELT FINISHING AND12" DISC FINISHING MACHINES FINISHING 6" INDUSTRIAL BELT FINISHING MACHINE Table tilts 45 out, and 20 in for all angle finishing operations Adjustable dust deflector and dust chute Completely enclosed drums and a guarded sanding belt Fine thread adjustment for simple and easy belt tracking Plain and compound miters are easily obtained by using the standard die-cast aluminum miter gauge Will handle virtually all the finishing operations in a production line Adjustable heavy duty, cast iron, removable platen Removable upper guard for contour finishing Variable-position locks; belt head adjusts vertically, horizontally and in-between Miter gauge Heavy-duty one piece steel stand 4300A/4301A Belt Size (in./w x L) 6 x 48 Belt Speed (SFPM) 2850 Table Tilt 45 Out, 20 In Platen (in.) 6 1/4 x 14 3/4 Motor 4300A Motor 4301A Overall Dimensions (in./w x D x H) 1-1/2HP, 115/230V, 1Ph, Prewired 115V 1-1/2HP, 230V, 3Ph 25-1/2 x 19 x 57-1/2 (Width when belt is in horizontal position) Net Weight (lbs.) 215 OPTONAL EQUIPMENT "x48" Abrasive Belt, 80 Grit Cabinet Dust Collector, includes Filter and TEFC 115/220V 1/2HP motor Hose Kit includes 1pc 5' high temperature hose & 2 clamps 12" INDUSTRIAL DISC FINISHING MACHINE Optimum speed of 1960 rpm, which is ideal for both metal and wood finishing Fully machined, balanced disc runs vibration free Plain and compound miters are easily obtained by using the standard die-cast aluminum miter gauge Large cast iron slotted table Easy to read scale shows exact degree of table tilt Miter gauge Heavy duty one piece steel stand 4400A/4401A Disc Size (in.) 12 Disc speed (RPM) 1960 Table Size (in.) 12 x 16-3/8 Table tilt 45 Out, 20 In Miter gauge groove (in.) 3/8 x 3/4 Motor 4400A Motor 4401A Overall Dimensions (in./w x D x H) 1-1/2HP, 115/230V, 1Ph, Prewired 115V 1-1/2HP, 230V, 3Ph 16 x 19 x 43 Net Weight (lbs.) OPTIONAL EQUIPMENT 12" Abrasive Disc 50 Grit Cabinet Dust Collector, includes Filter and TEFC 115/220V 1/2HP motor Hose Kit includes funnel attachment, hose adapter, 1pc hose and 2 clamps 132

15 FINISHING COMBINATION 6" BELT AND CHAMFERING MACHINES COMBINATION 6" BELT AND CHAMFERING MACHINE 6" BELT SANDER Contour finishing, mitering, flat finishing just to name a few applications Will handle virtually all the finishing operations in a production line Adjustable heavy duty, cast iron, removeable platen CHAMFERING Easily adjustable chamfering machine manages additional finshing jobs such as: beveling, and deburring on flats and squares of ferrous and non-ferrous materials Precision chamfer, bevel or deburr edges easily Chamfer angles from 15 to 45 Easily adjustable depth of cut 6" BELT SANDER Miter gauge Heavy-duty, one piece stand CHAMFERING 3"cutter head with 8 replaceable inserts Cast iron V-table Heavy-duty, one piece steel stand 4500/4501 BELT MACHINE Belt size(in./w x L) 6 x 48 Belt speed (SFPM) 2850 Table Size (in.) 7-3/8 x 14-3/4 Table tilt 45 Out, 20 In Miter gauge groove (in.) 3/8 x 3/4 Motor 4500 Motor /2HP, 115/230V, 1Ph, Prewired 115V 1-1/2HP, 230V, 3Ph Platen (in.) 6 1/4 x 14 3/4 CHAMFERING MACHINE Min. length of workpiece (in.) 3.5 Max. cut at 45 (in.) 1/4 Max. cut at 15 (in.) 3/16 Bevel angle Inserts Overall Dimensions (in./w x D x H) 3" milling cutter head with 8 replaceable carbide inserts 25-1/2 x 19 x 57-1/2 (Width when belt is in horizontal position) Net Weight (lbs.) 250 CHAMFERING MACHINE Precision chamfer, bevel or deburr edges easily Chamfer angles from 15 to 45 Easily adjustable depth of cut The milling cutter head has 8 easy to change inserts, and combined with an adjustable depth of cut and angle of cut capacity, can deliver accurate finishes on a repetitive basis 3" cutter head with 8 replaceable inserts Cast iron V-table Heavy-duty, one piece steel stand 4505/4506 Min Length of Workpiece (in.) 3.5 Max. cut at 45 (in.) 1/4 Max. cut at 15 (in.) 3/16 Bevel angle Inserts Motor 4505 Motor " milling cutter head with 8 replaceable carbide inserts 1-1/2HP, 115/230V, 1Ph, Prewired 115V 1-1/2HP, 230V, 3Ph Overall Dimensions (in./w x D x H) 16 x 19 x 39 Net Weight (lbs.)

16 12" DISC SANDER AND METAL CABINET DUST COLLECTORS 20" DISC SANDER Tilting table capability adds flexibility of 45 forward and 15 backward on positive lock rack and gear Table can be lowered below the disc to accommodate large work pieces Direct drive motor Low voltage protection switch Rigid column and heavy duty base Miter gauge Extra large tilting table Tilting table lowers completely below disc for use of the entire disc surface Wrap-over guard for added safety / Disc Size (in.) 20 Disc Speed (RPM) 1725 Table Size (in.) 27-1/2 x 10-1/2 Table slot (in.) 3/8 x 10-1/2 Table tilt Motor Motor Overall Dimensions (in./w x D x H) 45 Out, 15 In 3HP, 220V, 3Ph 3HP, 460V, 3Ph 30 x 27-1/2 x 53 Net Weight (lbs.) OPTIONAL EQUIPMENT Hose kit to adapt to dust collection system METAL CABINET DUST COLLECTORS Non-sparking aluminum housing and fan blade Easy to empty clean-out drawer Easy to change air filter Recirculates cleaned air Quiet, effective dust collection using the cyclone method Meets OSHA health and safety recommendations Maximum CFM 500 Maximum Hose Velocity (SFPM) 5000 Filter (in.) 12 x 16 x 1 Filter Efficiency 1 micron 5' 72 Hose Size (in.) 3 x 60 Motor 1/2HP, 115/230V, 1Ph Overall Dimensions (in./w x D x H) 16 x 24 x 32 Net Weight (lbs.) 100 S OPTIONAL HOSE KITS For Belt/Disc Dust Collection. Includes cast funnel attachment, hose adapter, two pieces of 5' high temperature hose and four hose clamps For Belt Machine Only and Combination Belt & Edge Machine. Includes one piece of 5' high temperature hose and two hose clamps For Disc Machine Only. Includes cast funnel attachment, hose adapter, one piece of high temperature hose and two hose clamps 134

JET FINISHING. Surface Grinders Bench Grinders Accessories

JET FINISHING. Surface Grinders Bench Grinders Accessories Surface Grinders.............................. 120 Bench Grinders............................... 122 Accessories................................... 122 119 6"x18" PRECISION MANUAL SURFACE GRINDER FINISHING

More information

E M P O W E R I N G S H O P P E R F O R M A N C E JETTOOLS.COM

E M P O W E R I N G S H O P P E R F O R M A N C E JETTOOLS.COM E M P O W E R I N G S H O P P E R F O R M A N C E JETTOOLS.COM For a high-quality finish every time, experts rely on JET grinders, sanders and finishing machines. Because your complete satisfaction is

More information

SANDERS AND ABRASIVES

SANDERS AND ABRASIVES 22-44 PLUS DRUM SANDER Our EXCLUSIVE SandSmart infinitely variable-feed control produces the ultimate finish at a rate from 0 to 10 feet per minute and prevents machine overload Patented conveyor belt

More information

WILTON SAWING. Horizontal Bandsaw s Vertical Bandsaws Cold Saws Cold Saw Blades Accessories... 32

WILTON SAWING. Horizontal Bandsaw s Vertical Bandsaws Cold Saws Cold Saw Blades Accessories... 32 Horizontal Bandsaw s........................... 18 Vertical Bandsaws.............................. 24 Cold Saws.................................... 27 Cold Saw Blades............................... 31

More information

10.5 gal. Vertical Oil Lubricated Air Compressor

10.5 gal. Vertical Oil Lubricated Air Compressor 10.5 gal. Vertical Oil Lubricated Air Compressor Model No. AC1104 Tank volume: 10.5 gal. (40 L) Direct drive Oil-lubricated single cylinder pump for durability and long life triple the pump life of comparable

More information

Clausing Precision Manual Surface Grinders

Clausing Precision Manual Surface Grinders Clausing Precision Manual Surface Grinders Precision Manual Surface Grinders with Table Sizes: 6" x 18" & 8" x 18" Standard Features... High precision cartridge spindle Anti-wear guide ways coated with

More information

Dynafile...8 Dynafile II hp Dynafile II...12 Vacuum Dynafile II...13 Electric Dynafile II...13 Mini-Dynafile II...16

Dynafile...8 Dynafile II hp Dynafile II...12 Vacuum Dynafile II...13 Electric Dynafile II...13 Mini-Dynafile II...16 Dynafile...8 Dynafile II...11.4 hp Dynafile II...12 Vacuum Dynafile II...13 Electric Dynafile II...13 Mini-Dynafile II...16 Dynafile III...18 Dynabelter...22 Dynangle...25 Dynangle II...26 Take-About Sander...27

More information

ABRASIVE BELT TOOLS. APTOOL.RU Phone: +7 (495)

ABRASIVE BELT TOOLS. APTOOL.RU Phone: +7 (495) ABRASIVE BELT TOOLS APTOOL.RU Phone: +7 (495) 723-19-55 ABRASIVE BELT TOOLS The Dynafile Original Air-Powered Abrasive Belt Tool The Best Tracking Abrasive Belt Tool in the World! 14000 For 24" Long Belts

More information

SURFACE GRINDERS. A Line of Precision Low-cost, High Performance Surface Grinders

SURFACE GRINDERS. A Line of Precision Low-cost, High Performance Surface Grinders SURFACE GRINDERS PRODUCT CATALOG www.clausing-industrial.com 800.323.0972 SURFACE GRINDERS A Line of Precision Low-cost, High Performance Surface Grinders Precision Manual Surface Grinders Precision Hydraulic

More information

Workpiece support can be readjusted without tools.

Workpiece support can be readjusted without tools. ESSENTIAL FOR EVERY WORKSHOP. Good tools are worth their weight in gold and should always be in perfect working order. Rust needs to be removed for example, or the screw driver needs to be ground. Whether

More information

Model. Reach into areas as small as 3/8". Model. Max. Air Flow SCFM (L/Min)

Model. Reach into areas as small as 3/8. Model. Max. Air Flow SCFM (L/Min) The Dynafile Original The Best Tracking Abrasive Belt Tool in the World! 14000 For 24" Long Belts World-famous Dynafile replaces tedious hand filing and sanding. Grind, deburr, blend, polish, finish and

More information

Grind-O-Flex. Wheels FLAP WHEELS

Grind-O-Flex. Wheels FLAP WHEELS Grind-O-Flex Wheels FLAP WHEELS From large Grind-O-Flex wheels 16 in diameter to Micro-Mini wheels 3/8 diameter, Merit Abrasives has the flap wheel for your application. Merit Grind-O-Flex flap wheels

More information

Dynabrade Portable Abrasive Belt Tools

Dynabrade Portable Abrasive Belt Tools Dynabrade Portable Abrasive Belt Tools Grind, Deburr, Blend, Clean, Polish and Finish Reorder No. D08.02R We offer a diverse line of products to help you get the job done. With expert knowledge, service

More information

SADDLE TYPE MANUAL FEATURES: SADDLE TYPE FEATURES:

SADDLE TYPE MANUAL FEATURES: SADDLE TYPE FEATURES: SADDLE TYPE MANUAL FEATURES: Meehanite cast iron of base, column, saddle, and table provides greater rigidity and highest possible grinding load capacity Ball bearing slideways resist damage due to impact

More information

GET WIRED FOR SUCCESS WITH NEW NORTON WIRE BRUSHES

GET WIRED FOR SUCCESS WITH NEW NORTON WIRE BRUSHES GET D FOR SUCCESS WITH NEW BRUSHES When you need the perfect low-impact solution for refining surfaces without removing any base material, try our new line of Norton wire brushes. This new, economically

More information

Wheel Size. Catalog Number. List Price. Wheel Size. Catalog Number. Wheel Size. Catalog Number. Wheel Size. Catalog Number.

Wheel Size. Catalog Number. List Price. Wheel Size. Catalog Number. Wheel Size. Catalog Number. Wheel Size. Catalog Number. Industrial Cast aluminum wheel guards can be exhausted or left closed. 8-foot power cord. Base mounted on/off switch. Rubber feet minimize vibration. 1/3 3600 6 x3/4 x1/2 600E 296 G1 30 115 Grinder UL

More information

FSG-2A818/3A818 HIGH PRECISION SURFACE GRINDER

FSG-2A818/3A818 HIGH PRECISION SURFACE GRINDER FSG-2A818/3A818 HIGH PRECISION SURFACE GRINDER FSG-2A8 1 FEATURES HIGH PRECISION SU FSG-2A818.3A818 These grinders have been specially developed and improved in recent years by us to continuously offer

More information

8" CUT-OFF SAW - 3 HP 10" SAWS - 3 HP 10" WET SAW BIG JOB CAPACITY 1-1/2" SOLIDS, 2-1/2" PIPE. Cast iron BASE PROVIDES RIGID ALIGNMENT MODEL K10B

8 CUT-OFF SAW - 3 HP 10 SAWS - 3 HP 10 WET SAW BIG JOB CAPACITY 1-1/2 SOLIDS, 2-1/2 PIPE. Cast iron BASE PROVIDES RIGID ALIGNMENT MODEL K10B 7" CUT-OFF SAW - 1 HP 8" CUT-OFF SAW - 3 HP 10" SAWS - 3 HP BIG JOB CAPACITY 1-1/2" SOLIDS, 2-1/2" PIPE Cast iron BASE PROVIDES RIGID ALIGNMENT MODEL K10B MODEL K7B Handles 1" solid round, 2" pipe. Adjustable

More information

For the Professional/Contractor Flap Discs for Angle Grinders

For the Professional/Contractor Flap Discs for Angle Grinders Flap Discs for Angle Grinders Vortec Abrasive Pro Coated Abrasive Flap Discs save both time and money! No need to switch from a Type 27 grinding wheel to a resin fiber disc because flap discs grind and

More information

SCAN TO VIEW WEBSITE

SCAN TO VIEW WEBSITE SCAN TO VIEW WEBSITE 7" CUT-OFF SAW - 1 HP 8" CUT-OFF SAW - 3 HP 10" SAWS - 3 HP BIG JOB CAPACITY 1-1/2" SOLIDS, 2-1/2" PIPE Cast iron BASE PROVIDES RIGID ALIGNMENT MODEL K10B MODEL K7B Handles 1" solid

More information

PUMA RANGE OF AIR TOOLS

PUMA RANGE OF AIR TOOLS Type G / ATAT-3170 3mm Micro Pencil Grinder PUMA RANGE OF AIR TOOLS Now with new Safety levers. Better quality & Lower prices! ATAT-7032 6mm Mini Die Grinder ATAT-7033 6mm Straight Die Grinder ATAT-7033L

More information

Catalog Number. List Price. Wheel Size. List Price. Catalog Number. Wheel Size. Wheel Size. List Price. Catalog Number. Wheel Size.

Catalog Number. List Price. Wheel Size. List Price. Catalog Number. Wheel Size. Wheel Size. List Price. Catalog Number. Wheel Size. Generators Servo s Industrial 600E 623E Cast aluminum wheel guards can be exhausted or left closed. 8-foot power cord. Base mounted on/off switch. Rubber feet minimize vibration. Cast aluminum non-exhaust

More information

MICHIGAN PNEUMATIC TOOL

MICHIGAN PNEUMATIC TOOL MICHIGAN PNEUMATIC TOOL Industrial Air Tools Grinders 2016 Serving All Industries Petro Chemical Aircraft Assembly Foundry Rental 1-800-521-8104 www.michiganpneumatic.com MATERIAL REMOVAL Right Angle Grinders

More information

7" CUT-OFF SAW - 1 HP 10" SAWS - 3 HP 8" CUT-OFF SAW - 3 HP 10" WET SAW BIG JOB CAPACITY 1-1/2" SOLIDS, 2-1/2" PIPE

7 CUT-OFF SAW - 1 HP 10 SAWS - 3 HP 8 CUT-OFF SAW - 3 HP 10 WET SAW BIG JOB CAPACITY 1-1/2 SOLIDS, 2-1/2 PIPE 7" CUT-OFF SAW - 1 HP 8" CUT-OFF SAW - 3 HP 10" SAWS - 3 HP BIG JOB CAPACITY 1-1/2" SOLIDS, 2-1/2" PIPE Cast iron BASE PROVIDES RIGID ALIGNMENT MODEL K10B MODEL K7B Handles 1" solid round, 2" pipe. Adjustable

More information

12" and 14" SAWS - 5 HP

12 and 14 SAWS - 5 HP 12" and 14" SAWS - 5 HP MODEL K14SS These heavy-duty saws handle 2-1/2" solid round stock, 3" pipe with speed and efficiency. Extra-heavy Cast iron base, trunnion and arm. Sealed ball bearings, 1" wheel

More information

Polishing and grinding equipment

Polishing and grinding equipment Polishing and grinding equipment Product Guide Serving Industry with Dependable Grinding & Polishing Machinery For Over 60 years Stephen Bader Co., Inc. Box 297, 10 Charles Street, Valley Falls, New York

More information

Surface Grinder ESG 618 E X18 Manually Operated. Features: Included as standard:

Surface Grinder ESG 618 E X18 Manually Operated. Features: Included as standard: Surface Grinder ESG 618 E 1-500-100 Features: Robust cast iron construction Easy and quick to set up which saves time Precision built for accuracy Mass produced and economically priced Ball bearing ways

More information

ANSI B Index

ANSI B Index Index A Abrasive disc wheels... 16 17, 79, 99 mounting... 39 40, 94 Abrasive flap disc wheels... 23 Abrasive wheel... 1, 89 Portable air grinding machines... 26 Acceptance of shipment... 27 Actuating controls...

More information

Precision Surface Grinder

Precision Surface Grinder Precision Surface Grinder SGS-2040 AHD/SD SGS-2060 AHD/SD SGS-S2460 AHD/SD A 70.9" (1800) 107.3" (2725) 110.2" (2800) B 118.1" (3000) 171.3" (4350) 171.3" (4350) C 163.8" (4160) 236.2" (6000) 244.1" (6200)

More information

GENERAL SPECIFICATION

GENERAL SPECIFICATION GENERAL SPECIFICATION Description FSG-2040ADII FSG-2060ADII FSG-2440ADII FSG-2460ADII FSG-2480DII Table Size 19 5/8 x393/8 (500x1000mm) 19 5/8 x59 (500x1500mm) 24 x39 3/8 (610x1000mm) 24 x59" (610x1500mm)

More information

FSG-2040ADII/2060ADII 2440ADII/2460ADII/2480ADII COLUMN TYPE HIGH PRECISION 3-AXIS AUTOMATIC SURFACE GRINDER

FSG-2040ADII/2060ADII 2440ADII/2460ADII/2480ADII COLUMN TYPE HIGH PRECISION 3-AXIS AUTOMATIC SURFACE GRINDER FSG-2040ADII/2060ADII 2440ADII/2460ADII/2480ADII COLUMN TYPE HIGH PRECISION 3-AXIS AUTOMATIC SURFACE GRINDER 1 CONTROL PANEL F S G - 2 0 / 2 4 COLUMN TYPE HIGH PRECISION 3-AX 1. Control power supply switches

More information

MODEL A-I-SPECIFICATIONS

MODEL A-I-SPECIFICATIONS ARTER Model A Rotary Surface Grinders are built in a light and heavy series. General Construction- The general design of both models is the same but the major units of the A-3 machines are of greater proportions.

More information

GRINDING. Grinding Wheels

GRINDING. Grinding Wheels Grinding Wheels GRINDING Industry leading grinding wheels, burrs and points from Walter are manufactured with productivity in mind and under the most stringent quality control standards. Grain, bond and

More information

THE NEXT GENERATION OF PERFORMANCE

THE NEXT GENERATION OF PERFORMANCE Best Value Guaranteed THE NEXT GENERATION OF PERFORMANCE 1 HP Continuous-Duty Dust Collector (M I -11100) 1 HP, 110 V, 1 PH, 7 A 4 (102 mm) 750 CFM 10 (254 mm) 75 dba 15 (381 mm) Bag Capacity: 20 gal.

More information

Sanders, Buffers & Polishers Introduction

Sanders, Buffers & Polishers Introduction Sanders, Buffers & Polishers Introduction Dotco sanders, buffers and polishers are available in a variety of styles and power ratings to provide flexibility in choosing the best tool for the job. Disc

More information

premium aluminum oxide flap wheels unmounted metal hub. Interleaf flap Wheels

premium aluminum oxide flap wheels unmounted metal hub. Interleaf flap Wheels premium aluminum oxide flap s unmounted metal hub size arbor 40 60 80 120 150 180 240 320 4" x 1" 5/8" 40836 43301 43302 43304 43306 43308 43309 5 4" x 1-1/2" 5/8" 41079 43351 43352 43353 43354 43355 43356

More information

Portable Air Tools for the Value-Minded Professional

Portable Air Tools for the Value-Minded Professional Reorder No. D05.09 Red Portable Air Tools for the Value-Minded Professional Includes Abrasive Belt Tools, Die Grinders, Disc Sanders, Buffers and More DynaZip Air Tools (See Page 2) 18255 DynaZip Air Tool

More information

Power Equipment

Power Equipment Power Equipment - 445 - Power Equipment T80900 1100w 19m Weldon Shank Auto-Reverse Tapping & Core Drill Machine Fully Mechanical tapping with automatic reversing controlled by crank motion Two-mode gear-box:

More information

NT-1300RR-LTD 2 Head Wide Belt Sander Series

NT-1300RR-LTD 2 Head Wide Belt Sander Series NT-1300RR-LTD 2 Head Wide Belt Sander Series * Shown NT 1300RRC-LTD Northtech Industrial Machinery 819 East Liberty Street Louisville, KY 40204 Phone: (502) 719-0015 Fax: (502) 719-0014 NT-1300RR-LTD Production

More information

Universal Cutter Grinder ORDER NO.U2 CODE NO

Universal Cutter Grinder ORDER NO.U2 CODE NO Universal Cutter Grinder ORDER NO.U2 CODE NO.1022-001 For grinding HSS and carbide engraving cutter as well as single lip or multiple lip cutters of various shapes such as radiused cutters or negative

More information

UNISON CORPORATION. DedTru Centerless Grinding Product Line

UNISON CORPORATION. DedTru Centerless Grinding Product Line Price List PL UNISON CORPORATION DedTru Centerless Grinding Product Line Model C DedTru Grinding Fixture Model PGF Plunge Grind Fixture Model C6 DedTru Grinding Fixture Model IGF Internal Grind Fixture

More information

SPECIFICATIONS Power input (W) No load speed (rpm) Hammer rate (under load) Drilling concrete / steel / wood 24 / 13 / 30 mm

SPECIFICATIONS Power input (W) No load speed (rpm) Hammer rate (under load) Drilling concrete / steel / wood 24 / 13 / 30 mm BH 24 IE 24 MM SDS-Plus Rotary Hammer Powerful 800 watt motor 24 mm drilling capacity in concrete Safety clutch for user protection Variable speed electronics for control Hammer action stop for drilling

More information

Air Finishing Tools CP778. Heavy Duty Hi-Speed Sander

Air Finishing Tools CP778. Heavy Duty Hi-Speed Sander Air Finishing Tools Finishing work provides a wide range of challenges and we have a complete line of sanders, buffers and polishers for every application from heavy material removal to fine finishing.

More information

Catalog # D Catalog # TD Catalog # TD Catalog # AS. Mult. Sym. Shpg. Wgt.

Catalog # D Catalog # TD Catalog # TD Catalog # AS. Mult. Sym. Shpg. Wgt. Industrial Abrasive Belt Sanders offers several options when it comes to industrial belt sanders, fixed and tiltable belts, grinder/sanders and even an adjustable speed sander for increased flexibility.

More information

Industries: Specially formulated wheel treatment (#5 wood resin) Larger diameter spindle Precise dimensional tolerances. Norton Tradename: Abrasive:

Industries: Specially formulated wheel treatment (#5 wood resin) Larger diameter spindle Precise dimensional tolerances. Norton Tradename: Abrasive: Category Definition Resin bond, vitrified bond, center lap, and cotton fiber mounted points are available in a wide range of shapes. Industries: Abrasive Grain: Shape : Aerospace Tool and Die Construction

More information

SECTION 9: PARTS. Headstock

SECTION 9: PARTS. Headstock SECTION 9: PARTS We do our best to stock replacement parts when possible, but we cannot guarantee that all parts shown are available for purchase. Call (800) 523-4777 or visit www.grizzly.com/parts to

More information

Dust Collectors and Fume Exhausters

Dust Collectors and Fume Exhausters www.americanfan.com Bulletin DFM 1600 Dust Collectors and Fume Exhausters Howden Industrial Fan Group American Fan /Joy Fan /Garden City Fan Model DC DUST COLLECTOR The Model DC is a low cost packaged

More information

SMALL DIAMETER WHEELS

SMALL DIAMETER WHEELS SMALL DIAMETER WHEELS CUTTING & SNAGGING WHEELS FOR DIE GRINDERS Get the most demanding jobs done right and done fast. 800.835.9999 / weilerabrasives.com SELECTING THE RIGHT WHEEL MAX PERFORMANCE SUPERIOR

More information

Electric Power Tools Created :05 Revised :08 Page 1

Electric Power Tools Created :05 Revised :08 Page 1 2005 Created 01.08.2005 11:05 Revised 02.08.2005 10:08 Page 1 INDEX Article Group Page Electric Hoists 3 Chain Hoist 3 Pneumatic Hammer Drills 4 Electric Hammer Drill 5 Paint and Mortar Mixer 5 Electric

More information

Dynabelter WARNING. Parts Page Reorder No. PD01 05 Effective January, 2001 Supersedes PD Models: Standard Duty/Finisher

Dynabelter WARNING. Parts Page Reorder No. PD01 05 Effective January, 2001 Supersedes PD Models: Standard Duty/Finisher Parts Page Reorder No. PD01 05 Effective January, 2001 Supersedes PD94 53 Models: 11462 Standard Duty/Finisher Dynabelter 11475 Standard Duty 11476 Heavy Duty 1" Wide Abrasive Belt Capacity! WARNING 1

More information

CATEGORY DEFINITION. SHAPE AVAILABILITY: A, B, and W COTTON FIBER MOUNTED POINTS GOOD FOR BLENDING AND POLISHING GOOD

CATEGORY DEFINITION. SHAPE AVAILABILITY: A, B, and W COTTON FIBER MOUNTED POINTS GOOD FOR BLENDING AND POLISHING GOOD CATEGORY DEFINITION Resin bond, vitrified bond, center lap, and cotton fiber mounted points are available in a wide range of shapes. INDUSTRIES: Aerospace Tool and Die Construction Metal Fabrication Automotive

More information

DIY (Personal Use Only)

DIY (Personal Use Only) 1 DRILL ELECTRIC DRILL and IMPACT DRILL Standard Accessories KW0700026: 1pc Impact Drill 5pcs Masonry Drills 9pcs Twist Drills KW0700026 KW0701000 KW0701002 KW0701001 5pcs Grinding Stones 1pc Case KW0700026

More information

MILLING MACHINES 30 / 40 / 50. A wide range of models to select from light to heavy duty models

MILLING MACHINES 30 / 40 / 50. A wide range of models to select from light to heavy duty models Since 1977 MILLING MACHINES A wide range of models to select from light to heavy duty models SHIAN RONG JING JI CO., LTD. No. 95, Ln. 61, Dafu Rd., Shengang Dist.,Taichung City 429, Taiwan. TEL: 886-4-2523

More information

The Finest Spindle speed

The Finest Spindle speed DESCRIPTION MODEL Distance between centers UNIT G5P-50M/NC 500(0 ) G3P/G38P(M&NC) 60M / NC 100M / 100NC 150M / 150NC 00M / 00NC 600(4 ) 1000(40 ) 1500(60 ) 000(80 ) SUPERTEC Since 1954 GENERAL Swing over

More information

FINISHING. Finishing Index. Sanders Polishers Finishing Accessories

FINISHING. Finishing Index. Sanders Polishers Finishing Accessories Finishing Index Sanders................... 33-34 Polishers...................... 34 Finishing Accessories........ 35-38 ACCESSORIES SPECIALTY PERCUSSIVE FINISHING ABRASIVE ASSEMBLY DRILLS The Best Way

More information

Centerless. Deburring, Polishing & Finishing Machines

Centerless. Deburring, Polishing & Finishing Machines Centerless Deburring, Polishing & Finishing Machines application automation Centerless Deburring, Polishing & Finishing Systems Randbright Machines and Systems run a variety of finishing wheels, wire brushes,

More information

WOODWORKING MACHINERY

WOODWORKING MACHINERY PRICE LIST NO. 56 Applying to the Complete Line of WOODWORKING MACHINERY SUPERSEDING AND CANCELLING ALL PREVIOUS ISSUES SUBJECT TO CHANGE WITHOUT NOTICE EFFECTIVE AUGUST 1, 2005 Over 84 Years of Continuous

More information

Unison Corporation. DedTru Centerless Grinding Product Line

Unison Corporation. DedTru Centerless Grinding Product Line Price List PL Unison Corporation DedTru Centerless Grinding Product Line Model C DedTru Grinding Fixture Model PGF Plunge Grind Fixture Model IGF Internal Grind Fixture Model C6 DedTru Grinding Fixture

More information

Creusen Industrial Double Grinders 9000

Creusen Industrial Double Grinders 9000 The double grinding machines (DS) are fitted with grinding wheels with diameters of 200 mm, 250 mm and 300 mm respectively. They are characterised by their high, progressive power ratings which are more

More information

PRODUCT GUIDE BROBO GROUP. brobo.com.au. All Brobo Machines & Parts include a 2 year Warranty. Certified System. Quality ISO 9001 AND OWNED

PRODUCT GUIDE BROBO GROUP. brobo.com.au. All Brobo Machines & Parts include a 2 year Warranty. Certified System. Quality ISO 9001 AND OWNED A L I F E T I M E O F R E L I A B I L I T Y PRODUCT GUIDE BROBO GROUP AND OWNED Certified System Quality ISO 91 TM All Brobo Machines & Parts include a 2 year Warranty S315D, S35D & S4B FERROUS METAL CUTTING

More information

High Performance. Mini Grind-O-Flex Wheels HIGH PERFORMANCE MINI GRIND-O-FLEX QUICK-CHANGE (CONTINUED) Mini Grind-O-Flex Quick-Change

High Performance. Mini Grind-O-Flex Wheels HIGH PERFORMANCE MINI GRIND-O-FLEX QUICK-CHANGE (CONTINUED) Mini Grind-O-Flex Quick-Change GRIND-O-FLEX IMPROVED High Performance QUICK-CHANGE (CONTINUED) Mini Grind-O-Flex Wheels X 1/4-20 THD. Mini Grind-O-Flex Quick-Change The Mini Grind-O-Flex is designed for polishing and grinding intricate

More information

MACHINES USED CATEGORY DEFINITION GRIT RANGE: ABRASIVE GRAIN: Ceramic Alumina/Aluminum Oxide Blend, Aluminum Oxide

MACHINES USED CATEGORY DEFINITION GRIT RANGE: ABRASIVE GRAIN: Ceramic Alumina/Aluminum Oxide Blend, Aluminum Oxide CATEGORY DEFINITION Flap wheels are an ideal choice for a wide variety of blending, deburring and finishing applications common in the metal fabrication, welding and polishing industries. Flap wheels are

More information

SG9MTS Cylinder Head Seat & Guide Machine

SG9MTS Cylinder Head Seat & Guide Machine SG9MTS Cylinder Head Seat & Guide Machine The Speed of Live and the Accuracy of Fixed Machining Equipment Created for Performance Racing & Engine Remanufacturing. So Advanced, It s Simple. SG9MTSMTS CYLINDER

More information

SP - SURFACE GRINDING AND MILLING MACHINES. AZ spa MACHINE TOOLS. SP1300 SP1600 SP2000 version M-Y-PLC

SP - SURFACE GRINDING AND MILLING MACHINES. AZ spa MACHINE TOOLS. SP1300 SP1600 SP2000 version M-Y-PLC SP - AZ spa MACHINE TOOLS SP1300 version M-Y-PLC 0.2 Variable speed - on the table movement - on the head movement - on the grinding wheel rotation Automatic and programmable working cycle SP1300 PLC PLC

More information

R A S IVE P R O D U C T S

R A S IVE P R O D U C T S Volume 3 Global Abrasive Products, Inc. is pleased to provide you with our new full-line catalog. GAP s core values center on service, quality, competitiveness, and product breadth. As well, we have put

More information

Bulletin T Bulletin SG Bulletin T Bulletin SA MACHINERY

Bulletin T Bulletin SG Bulletin T Bulletin SA MACHINERY Bulletin T-10...54 Bulletin SG-1...55 Bulletin T-12...57 Bulletin SA-21...58 & A B e drawing V-00-0419 & G&P Machinery - GPSS Heavy Duty Stroke Sanders - MADE IN THE U.S.A. Model HP Belt Size Table

More information

3M Industrial Products. Abrasives and Power Tools for Welders. Welding Solutions

3M Industrial Products. Abrasives and Power Tools for Welders. Welding Solutions 3M Industrial Products Abrasives and Power Tools for Welders Welding Solutions What s New for2011 3 4 1 2 5 6 1 2 3 3M Cubitron II Fibre Discs 987C The coolest way to increase productivity. If you work

More information

Compatibility overview of accessories for drilling machines

Compatibility overview of accessories for drilling machines Compatibility overview of accessories for drilling machines Convincing arguments: quality, efficiency and price Direct-SSBF MT 2 3050571 MT 2 3050572 MT 3 3050573 MT 4 3050574 Precision-SSBF 0-8 mm 3050608

More information

1000 SERIES VERTICAL GRINDING MACHINES

1000 SERIES VERTICAL GRINDING MACHINES Product Catalog Vertical Grinders 1000 SERIES VERTICAL GRINDING MACHINES The CGC Model 1000 is the core of Campbell Grinder Company s modular machine philosophy. High performance, reliability, and v ersatility

More information

20-G SERIES PRECISION DIE GRINDERS (.2 hp) 40-G & 41-G SERIES DIE GRINDERS (.9 hp) 4110 & 4111 SERIES DIE GRINDERS (.9 hp)

20-G SERIES PRECISION DIE GRINDERS (.2 hp) 40-G & 41-G SERIES DIE GRINDERS (.9 hp) 4110 & 4111 SERIES DIE GRINDERS (.9 hp) 20-G SERIES PRECISION DIE GRINDERS (.2 hp) DIE GRINDER KIT (Add a "K" to end of tool model number). Includes: (1) 20-G or 20-GM (1) 3 /,6" dia. x 5' long hose (4) '/a" carbide burrs - Cylindrical plain

More information

DRILL PRESSES. Mechanical Variable Speeds rpm Electronic Variable Speeds rpm CNC Power Feed EVS Speeds rpm

DRILL PRESSES. Mechanical Variable Speeds rpm Electronic Variable Speeds rpm CNC Power Feed EVS Speeds rpm DRILL PRESSES PRODUCT CATALOG www.clausing-industrial.com 800.323.0972 DRILL PRESSES Mechanical Variable Speeds 150 2000rpm Electronic Variable Speeds 50 2000rpm CNC Power Feed EVS Speeds 50 2000 rpm 20

More information

SECTION 9: PARTS Head Breakdown

SECTION 9: PARTS Head Breakdown G3102/G3103 Vertical Mill -45-1 1-1 2 2-1 3 3-1 4 5 6 7 8 9 9-1 10 10-1 11 12 13 14 15 16 17 18 19 20 20-1 21 22 22-1 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 42 43 44 45 46 47 48 49 50 51

More information

Features and Specifications for Impact Wrenches

Features and Specifications for Impact Wrenches Pneumatic Air Tools Version 2017 Revised 06/2017 Email your order to: sales@polyconn.com or fax to (763) 398-2590. www.polyconn.com. Questions call: (763)559-0388 3062 Ranchview Lane North. Plymouth, MN

More information

DYNASTRAIGHT For Grinding, Cleaning and Polishing Works on Stainless Steel, Aluminum, Composites

DYNASTRAIGHT For Grinding, Cleaning and Polishing Works on Stainless Steel, Aluminum, Composites DYNASTRAIGHT For Grinding, Cleaning and Polishing Works on Stainless Steel, Aluminum, Composites 950 RPM Model 13200.7 hp Model 13500 1 hp 13071 Combo Arbor for up to 3" wide wheels with a 5/8" or 1" dia.

More information

INDEX. PAGE Adjustment mechanism for radial position of block on rotating

INDEX. PAGE Adjustment mechanism for radial position of block on rotating INDEX Adjustment mechanism for radial position of block on rotating arm 520 Amplifying mechanism for precision measuring instruments--491 Angular movement, crank and link mechanisms for increasing 251,

More information

MACHINES USED CATEGORY DEFINITION GRIT RANGE: ABRASIVE GRAIN:

MACHINES USED CATEGORY DEFINITION GRIT RANGE: ABRASIVE GRAIN: CATEGORY DEFINITION Flap wheels are an ideal choice for a wide variety of blending, deburring and finishing applications common in the metal fabrication, welding and polishing industries. Flap wheels are

More information

Precision Surface Grinder-Wizard series

Precision Surface Grinder-Wizard series Precision Surface Grinder-Wizard series Wizard Series Features User Friendly Interface: Modern 6 LCD touch screen operation panel with all the grinding variables sets, all you have to do is to set the

More information

FSG-1224ADII/1632ADII /1640ADII AUTOMATIC PRECISION SURFACE GRINDING MACHINE

FSG-1224ADII/1632ADII /1640ADII AUTOMATIC PRECISION SURFACE GRINDING MACHINE FSG-1224ADII/1632ADII /1640ADII AUTOMATIC PRECISION SURFACE GRINDING MACHINE F S G - 1 2 / 1 6 A D 1 FEATURES AUTOMATIC PRECISION SURFAC FSG-1224ADII 1632ADII 1640ADII AUTOMATIC PRECISION SURFACE GRINDING

More information

M E T A L W O R K I N G

M E T A L W O R K I N G M E TA LW O R K I N G 2009/2010 JET: 50 years of experience 50 years of high-quality machines 1958 The foundation of JET The flight with the first Boeing jet aeroplane from Seattle (USA) to Japan with

More information

Compatibility overview of accessories for drilling machines

Compatibility overview of accessories for drilling machines Compatibility overview of accessories for drilling machines Accessory items for drilling B13 B14 B16 B20 B25 B32 RB 6T RB 8S B17 Pro B23 Pro/Vario B26 Pro/Vario B33 Pro/Vario B16 H/Vario B24 H/Vario B28

More information

ALWAYS A WINNING HAND

ALWAYS A WINNING HAND ALWAYS A WINNING HAND NORTON ABRASIVES AND TOOLS An operator s and production foreman s perfect tool: our new Norton pneumatic die grinder quickly and comfortably accomplishes many portable applications

More information

the pearl maxidisc system

the pearl maxidisc system Distributed by: BEST MATERIALS Ph: 800-474-7570, 602-272-8128 Fax: 602-272-8014 www.bestmaterials.com Email: Sales@BestMaterials.com the pearl maxidisc system CHOOSE THE MAXIDISC THAT IS RIGHT FOR YOU!

More information

G10SR3(H6) 100mm Angle Grinder

G10SR3(H6) 100mm Angle Grinder CORDLESS PNEUMATIC DRILLING ROTARY & Model Wheel Diameter Input Power QUICK REFERENCE GUIDE FOR GRINDERS Spindle Thread Anti Vibe Handle UVP Switch Type Trigger Lock G10SN 100mm 840W 10000 (min-1) M10

More information

THE CLEAR PATH TO SUCCESS BEGINS WITH PARTNERSHIPS.

THE CLEAR PATH TO SUCCESS BEGINS WITH PARTNERSHIPS. SMART SOLUTION THE CLEAR PATH TO SUCCESS BEGINS WITH PARTNERSHIPS. Every day, businesses find clearer paths to success by partnering with Weiler. Together, we can evaluate your operation, identify opportunities

More information

Belt-and Disc Sanders ST-DS 300 M

Belt-and Disc Sanders ST-DS 300 M Belt-and Disc Sanders ST-DS 300 M Sanders Powerfull Motors Self-adhesive abrasive discs Tiltable cast iron tables ST-DS 300 M ST-DS 300 M Article-no. 66.890.89002.11 230 V 750 W 735 W 1420 RPM Belt size

More information

Multi-Purpose Milling Machine

Multi-Purpose Milling Machine Multi-Purpose Milling Machine MF most widely used milling machine type world-wide! MF 1 speed change through v-belt change-over Multi-Purpose Milling Machine for workshops, single part production, design,

More information

KST 16 KST 16V KST 25 KSS 25V KSS

KST 16 KST 16V KST 25 KSS 25V KSS F KST 16V shown KSS 32 shown 186 Industrial Drill Presses KST KSS Rigid table (KST) and column drill presses (KSS) with large work tables Specifications KST 16 KST 16V KST 25 KSS 25V KSS 32 drilling capacity

More information

HORIZONTAL PIVOT STYLE BAND SAWS

HORIZONTAL PIVOT STYLE BAND SAWS HORIZONTAL PIVOT STYLE BAND SAWS S-20 CAST IRON SAW HEAD Provides rigidity and less vibration when cutting. Ensures straight cuts and increases blade life! DIGITAL BAND TENSIONING DISPLAY Manual mechanical

More information

Angle & Vertical Grinders

Angle & Vertical Grinders Angle & Vertical Grinders Lightweight aluminium housing to help reduce operator fatique. Designed to handle a variety of applications from fine deburring to heavy grinding. Equipped for Type 27 depressed

More information

Accessory Items ACCESSORIES GRINDING

Accessory Items ACCESSORIES GRINDING Accessory Items The convenience of one stop shopping is provided through the selection of accessories offered by United Abrasives to complement and match our product offering. All of the accessories carried

More information

Burr-Rx Brushes. Introducing the most aggressive line of compliant brushing tools ever! New Filament Cuts 400% Faster For Minimum Cycle Times!

Burr-Rx Brushes. Introducing the most aggressive line of compliant brushing tools ever! New Filament Cuts 400% Faster For Minimum Cycle Times! ~Ceramic Filament Brochure.qxd 4/4/08 9:51 AM Page 1 Burr-Rx es Introducing the most aggressive line of compliant brushing tools ever! Mounts Directly onto Shell Mill Holder! New Filament Cuts 400% Faster

More information

Palm-Style Mini-Orbital Offset Mini-Orbital...55 Angle-Head Mini-Dynorbital...56 Right Angle Mini-Orbital...57 Electric Dynorbital...

Palm-Style Mini-Orbital Offset Mini-Orbital...55 Angle-Head Mini-Dynorbital...56 Right Angle Mini-Orbital...57 Electric Dynorbital... Dynorbital-Spirit...46 HiVac Dynorbital-Spirit...48 Mesh Abrasive Systems...49 Dynorbital Supreme...50 Two-Hand Dynorbital...52 11" Dia. Dynorbital...53 Palm-Style Mini-Orbital...54 7 Offset Mini-Orbital...55

More information

Abrasives & Abrasive Hardware. ISO 9001:2008 Quality Management System

Abrasives & Abrasive Hardware. ISO 9001:2008 Quality Management System Abrasives & Abrasive Hardware ISO 9001:2008 Quality Management System Clesco the Abrasive Hardware Specialist This catalog reflects the major product categories & is not comprehensive in including all

More information

WOODWORKING & METALWORKING MACHINERY 2018 SPRING CATALOG

WOODWORKING & METALWORKING MACHINERY 2018 SPRING CATALOG www.general.ca WOODWORKING & METALWORKING MACHINERY 2018 SPRING CATALOG 4.19.17 #10-005/10-005CF/10-005SCF M1 Dust collector - 1 HP General International General / General International product #10 005A

More information

ADVANCED. DIGIPREP Programmable Fully Automatic Metallography Grinder & Polisher

ADVANCED. DIGIPREP Programmable Fully Automatic Metallography Grinder & Polisher DIGIPREP 251 ADVANCED DIGIPREP preparation systems are designed for fully automated materialographic sample preparation for consistent and reproducible specimen quality. DIGIPREP s variable speed base

More information

Rough Grinding and Cutting off

Rough Grinding and Cutting off Rough Grinding and Cutting off Working in a tough environment places high demands on the tools and on the operator. The high power-to-weight ratios of our tools make them comfortable to work with and gives

More information

Automatic Surface Grinder SGE Series

Automatic Surface Grinder SGE Series Automatic Surface Grinder SG Series PRCISION MACHIN TOOLS Sharp Industries, Inc. 3501 Challenger Street Torrance, CA 90503 Tel 310-370-5990 Fax 310-542-6162 mail: info@sharp-industries.com Parts: parts@sharp-industries.com

More information

Fein The Metal Industry Specialists

Fein The Metal Industry Specialists www.fein.com.au ENDS MAY 31 2017 Fein The Metal Industry Specialists SEE INSIDE FOR SPECIAL OFFERS MAGDRILL RANGE DUST EXTRACTION ANGLE GRINDERS COLD CUT SAW 3 8 4-5 3 FEIN: THE LEADERS IN CORE DRILLING

More information

UNIVERSAL PRODUCTION EDGE BELT SANDERS

UNIVERSAL PRODUCTION EDGE BELT SANDERS UNIVERSAL PRODUCTION EDGE BELT SANDERS Designed for use with edge finishing devices common to the furniture and custom woodworking industry. The ability to use the machine for a variety of edge finishing

More information

The MATHEY Pneumatic or Hydraulic Powered CGM-1

The MATHEY Pneumatic or Hydraulic Powered CGM-1 CGM-1 COLD CUTTING & BEVELING MACHINE in Pneumatic and Hydraulic versions Approved CGM-1 A Pneumatic Driven Part No.: 05.5500.559 CGM-1 O Hydraulic Driven Part No.: 05.5500.560 The CGM Cold Cutting and

More information