2015 CATALOG MOTORIZED / MANUAL

Transcription

1 2015 CATALOG MOTORIZED / MANUAL Micropositioners Test Positioners Coaxial Probing Custom Solutions

2 Price list Manipulators: Description Price XYZ 300 TL or TR $500 XYZ 500 MLS or MRS $845 XYZ 500 MIS (inline) $925 XYZ 500 TLS or TRS $970 XYZ 500 TIS (inline) $1050 XYZ 500 MLM or MRM $970 XYZ 500 MIM (inline) $1045 XYZ 500 TLM or TRM $1145 XYZ 500 TIM (inline) $1190 XYZ 500 MLS low profile (left hand) $1045 XYZ 500 MRS low profile (right hand) $1045 XYZ 2000 Series $3160 XYZ 2000 Series with limits $3,495 XYZ 500 MIMT (inline) $3175 XYZ 500 MLMT $ Theta Plates $ B Scope mounts $ Controller $ Additional Cards 3 axis per card $925 Notes: -All MICROMETER adjusting positioners are available with either.001in. or.01mm resolution..01mm is standard. -All SCREW adjusting positioners are available with 40, 80 and 100 thread/inch lead screws. 80 TPI is standard. -All TEST positioners are supplied with: XYZ-300-T: A TEST ARM HOLDER ASS Y A TEST ARM ASS Y including H TEST NEEDLE A MAGNETIC BASE ASS Y A INSULATOR & A CONNECTING PIN XYZ-500-T: A TEST ARM HOLDER ASS Y A TEST ARM ASS Y including H TEST NEEDLE A MAGNETIC BASE ASS Y A INSULATOR & A CONNECTING PIN Page 2 of 27

3 Accessories: Description Price Tungsten Needle $ C Beryllium Copper $ Needle and Test Arm $ Needle and Straight Test Arm $ Test Arm Holder $ thru 6 inch $ Test Arm Holder $ thru 6 inch $ Isolated Test Arm Assembly $ Test Arm Holder Insulator $ Male Connector Pin (New Larger) Male Connector Pin Female Connector (20260) Magnetic Base for XYZ 300 $ Ultra Magnetic Base for XYZ 300 $ Magnetic Base for XYZ 500 $ Ultra Magnetic Base for XYZ 500 $ Vacuum Base for the XYZ 500 $ Vacuum Base for the XYZ 300 $ Vacuum Base for the XYZ 2000 $ Micrometer Head 13mm $ Micrometer Head 13mm $ Adjusting Screw Assembly $ Nut for Testing Arm $ Adapter for XYZ 300 covert to XYZ 500 mounting holes $ Straight drop or rise for any of our positioners $ XYZ Spacers (between magnetic base and unit) $ Coaxial Probe Assembly Kit $ Replacement Coaxial Test Probe $ Coaxial Probe Holder $ RF Arm XZ Extension $ RF Arm Planarity Adjust Assembly $ RF Arm Tilt Adjust Assembly $ Probe Adapter with Tilt and Swivel $ RF Straight Drop $ NEWS Adapter $ Suss style front mount $ Collet probe arm semi flexible with Coax Cable BNC connector $ T Collet probe arm semi flexible with Triax cable and connector $335 BNC cable to straight pin $42 Triax cable 3 slot lug male connector to straight pin $135 BNC cable to SMA connector use with A probe $56 Analytical Probing options for DC probing: Description Price Tungsten Needle $ Needle and Test Arm $ Needle and Straight Test Arm $ Test Arm Holder $ thru 6 inch Test Arm Holder $ c thru 6c inch (centered) $ Test Arm Holder $ thru 6 inch $ Isolated Test Arm Assembly $ Collet probe arm semi flexible with BNC connector $210 RF Probe options: Description Price Coaxial Probe Assembly Kit $ Replacement Coaxial Test Probe $ Coaxial Probe Holder $34 Page 3 of 27

4 XYZ-300 MR & ML Micropositioner Height: 1.750" Nominal Base footprint: 1.50" X Travel: X, Y, Z axis =.500" Resolution:.025 per turn XYZ-300-ML left hand shown The XYZ-300 Micro positioner is a general purpose positioner intended for industrial, medical, biological, semiconductor, and general scientific applications. It provides 3-axis motion with.300" movement on each axis. Motion is controlled by three adjustment screw knobs that provide.025" resolution per turn. Components are made of dense aluminum, anodized black, with lifetime lubrication. Adjustment knobs are gold anodized aluminum. Available in Left hand (XYZ300-ML see photo), or Right hand (XYZ-300-MR see dimensional drawing) configuration. SIDE VIEW XYZ-300-MR right hand drawing FRONT VIEW Page 4 of 27

5 XYZ-300 TR & TL Test positioner Height: 2.000" Nominal Base footprint: 1.500" X Travel: X, Y, Z axis =.500" Resolution:.025 per turn A Magnetic Base A Test Arm Holder (includes) A Insulator H Connecting Pin A Test Arm (includes) H Test Needle XYZ-300-TL left hand test positioner shown The XYZ-300 Test Positioner is a general purpose positioner intended for industrial, medical, biological, semiconductor, and general scientific applications. It provides 3-axis motion with.300" movement on each axis. Motion is controlled by three adjustment screw knobs that provide.025" resolution per turn. Components are made of precision ground dense aluminum with lifetime lubrication. Slide bases and components are made of dense aluminum with a black anodized finish. Available in Left hand (XYZ-300-TL see photo), or Right hand (XYZ300-TR see drawing) configuration. SIDE VIEW XYZ-300-TR right hand drawing FRONT VIEW Page 5 of 27

6 XYZ-500-MRS & MLS Micropositioner with Screw adjust Height: 3.000" Nominal Base footprint: 2.000" X Travel: X, Y, Z axis =.500" Resolution: Available with 40, 80, 100 threads per inch. XYZ-500-MLS left hand shown The XYZ-500 Micropositioner is intended for precise probing and instrumentation for industrial, medical, biological, semiconductor, and general scientific applications. It provides 3-axis motion with.500" movement on each axis. Motion is controlled by three adjustment screws available with either 40, 80 (standard), or 100 threads per inch. Precision high-quality 440 stainless steel ball bearings allow precise linear motion on all three axis. Gibs and Slides are made of heat treated, ground, and 440 stainless steel. Slide bases are made of dense aluminum with a textured off-white finish. Available in left hand (XYZ-500- MLS see photo), or right hand (XYZ-500-MRS see drawing) configuration. SIDE VIEW XYZ-500-MRS right hand drawing FRONT VIEW Page 6 of 27

7 XYZ-500-TRS & TLS Test positioner, Screw adjust. Height: 3.250" Nominal Base footprint: 2.500" X Travel: X, Y, Z axis =.500" Resolution: 40, 80, or 100 threads per inch. A Magnetic Base A Test Arm Holder (includes) A Insulator H Connecting Pin XYZ-500-TLS left hand test positioner shown A Test Arm (includes) H Test Needle The XYZ-500 Test positioner is intended for probing applications in the testing and analysis of silicon wafers, substrates, and dies in the semiconductor industry. It provides 3-axis motion with.500" movement on each axis. Motion is controlled by three in-line screws available with 40, 80(standard), or 100 threads per inch. Precision high-quality 440 stainless steel ball bearings allow precise linear motion on all three axis. Gibs and Slides are made of heat treated, ground, and 440 stainless steel. Slide bases are made of dense aluminum with a textured off-white finish. Available in Left hand (XYZ-500-TLS see photo), or Right hand (XYZ-500-TRS see drawing) configuration. SIDE VIEW XYZ-500-TRSright hand drawing FRONT VIEW Page 7 of 27

8 XYZ-500-TRM & TLM Test positioner, Micrometer adjust. Height: 4.500" Nominal Base footprint: 2.500" X Travel: X, Y, Z axis =.500" Resolution:.01mm or.001in. A Magnetic Base A Test Arm Holder (includes) A Insulator H Connecting Pin A Test Arm (includes) H Test Needle XYZ-500-TLM left hand test positioner shown The XYZ-500 Test Positioner is intended for probing applications in the testing and analysis of silicon wafers, substrates, and dies in the semiconductor industry. It provides 3-axis motion with.500" movement on each axis. Motion is controlled by three micrometer heads available with either.01mm (standard) or.001in resolution. Precision high-quality 440 stainless steel ball bearings allow precise linear motion on all three axis. Gibs and Slides are made of heat treated, ground, and 440 stainless steel. Slide bases are made of dense aluminum with a textured offwhite finish. Available in Left hand (XYZ-500-TLM see photo) and Right hand (XYZ500-TRM see drawing) configuration. SIDE VIEW XYZ-500-MRM right hand drawing FRONT VIEW Page 8 of 27

9 XYZ-500-MIM Micropositioner, In-line, Micrometer adjust. Height: 4.250" Nominal Base footprint: 2.000" X Travel: X, Y, Z axis =.500" Resolution:.01mm or.001in. XYZ-500-MIM inline shown The XYZ-500-MIM Micropositioner is intended for probing applications in the testing and analysis of silicon wafers, substrates, and dies in the semiconductor industry. It provides 3-axis motion with.500" movement on each axis. Motion is controlled by three micrometer heads available with either.01mm or.001in resolution. Precision high-quality 440 stainless steel ball bearings allow precise linear motion on all three axis. Gibs and Slides are made of heat treated, ground, and 440 stainless steel. Slide bases are made of dense aluminum with a textured offwhite finish. SIDE VIEW XYZ-500-MIM inline drawing FRONT VIEW Page 9 of 27

10 XYZ-500-TIS Test positioner, In-line, Screw adjust. Height: 3.250" Nominal Base: A Magnetic base Base footprint: 2.500" X Travel: X, Y, Z axis =.500" Resolution: 40, 80, or 100 tpi A Magnetic Base A Test Arm Holder (includes) A Insulator H Connecting Pin A Test Arm (includes) H Test Needle XYZ-500-TIS inline test positioner shown The XYZ-500-TIS Test positioner is intended for probing applications in the testing and analysis of silicon wafers, substrates, and dies in the semiconductor industry. It provides 3-axis motion with.500" movement on each axis. Motion is controlled by three in-line screws available with 40, 80(standard), or 100 threads per inch. Precision high-quality 440 stainless steel ball bearings allow precise linear motion on all three axis. Gibs and Slides are made of heat treated, ground, and 440 stainless steel. Slide bases are made of dense aluminum with a textured off-white finish. SIDE VIEW XYZ-500-TIS inline drawing FRONT VIEW Page 10 of 27

11 XYZ-500-TIM Test positioner, In-line, Micrometer adjust. Height: 4.250" Nominal Base: A Magnetic base Base footprint: 2.500" X Travel: X, Y, Z axis =.500" Resolution:.01mm or.001in A Magnetic Base A Test Arm Holder (includes) A Insulator H Connecting Pin XYZ-500-TIM inline test positioner shown A Test Arm (includes) H Test Needle The XYZ-500-TIM Test Positioner is intended for probing applications in the testing and analysis of silicon wafers, substrates, and dies in the semiconductor industry. It provides 3-axis motion with.500" movement on each axis. Motion is controlled by three micrometer heads available with either.01mm (standard) or.001in resolution. Precision high-quality 440 stainless steel ball bearings allow precise linear motion on all three axis. Gibs and Slides are made of heat treated, ground, and 440 stainless steel. Slide bases are made of dense aluminum with a textured off-white finish. SIDE VIEW XYZ-500-TIM inline drawing FRONT VIEW Page 11 of 27

12 XYZ-1000 MRS & MLS Micropositioner, Screw adjust Height: 4.00" Nominal Base footprint: 2.25" X 1.75 Travel: X, Y, Z axis = 1.00" Resolution:.01mm or.001in XYZ-1000-MLS micropositioner shown The XYZ-1000 Micropositioner is intended for precise probing and instrumentation for industrial, medical, biological, semiconductor, and general scientific applications. It provides 3axis motion with 1.000" movement on each axis. Motion is controlled by three adjustment screws available with either 40, 80 (standard), or 100 threads per inch. Precision high-quality 440 stainless steel ball bearings allow precise linear motion on all three axis. Gibs and Slides are made of heat treated, ground, and 440 stainless steel. Slide bases are made of dense aluminum with a textured off-white finish. Available in left hand (XYZ-1000-MLS see photo), or right hand (XYZ-1000MRS see drawing) configuration. SIDE VIEW XYZ-1000-MRS drawing FRONT VIEW Page 12 of 27

13 XYZ-500-MRS & MLS Low profile Low profile Micromanipulator Height: 1.75" Weight: Shipping weight less than 2 lb. Base footprint: 1.50" X 2.00" Travel: X, Y, Z axis =.500" Resolution: Available with 40, 80, or 100 threads per inch. These micropositioners are intended for probing applications in the testing and analysis of silicon wafers, substrates, and dies in the semiconductor industry. It provides 3-axis motion with.500" movement on each axis. Motion is controlled by three screw adjustment knobs available in 40, 80 or 100 threads per inch. Precision high-quality 440 stainless steel ball bearings allow precise linear motion on all three axis. Gibs and Slides are made of 440 stainless steel. Slide bases are made of aluminum anodized black. All of the units are shipped at 80 TPI unless otherwise specified. Low profile translation stage. The XYZ 500 Micromanipulator with screw adjust is available only in a left hand and right hand model. A general purpose micropositioner, it is used for industrial, medical, biological, semiconductor, and general scientific applications. There are many front end options available to adapt to various testing applications. These translation stages are available in any combination of XYZ or just X and Y. Page 13 of 27

14 SPECIALS XYZ-300, XYZ-500, & XYZ-1000 Page 14 of 27

15 XYZ-2000 Micropositioner With motors Height: 7.00" Nominal Base footprint: 3.0" X Travel: X, Y, Z axis = 2.00" Resolution: 1mm per turn Motors: 200 steps per turn Weight: 1.75lbs per axis The MODEL 2000 Series Micropositioner is intended for precise probing and instrumentation for industrial, medical, biological, semiconductor, and general scientific applications. It provides single axis of motion and can be stacked as shown above to provide 3-axis motion with 2.000" movement on each axis. Motion can be controlled by three adjustment screws or motorized as pictured. Precision highquality 440 stainless steel ball bearings allow precise linear motion on all three axis. Gibs and Slides are made of heat treated, ground, and 440 stainless steel. Slide bases are made of dense aluminum with black anodized finish. Page 15 of 27

16 XYZ-500 MIS Upgrade on all axis with P/N A Motor Height: 4.60" Nominal Base footprint: 2.000" X Travel: X, Y, Z axis =.500" Resolution:.08 Microns per step with 121:1 Gearbox Standard The XYZ-500-MIMT Micropositioner is intended for precise probing and instrumentation for industrial, medical, biological, semiconductor, and general scientific applications. It provides 3-axis motion with.500" movement on each axis. Motion is controlled by three precision stepping motors attached to precision gearheads 121:1 (standard), that drive a 100 threads per inch screw (standard). Precision high-quality 440 stainless steel ball bearings (cross roller bearings also available) allow precise linear motion on all three axis. Gibs and Slides are made of heat treated, ground, and 440-C stainless steel. Slide bases are made of dense aluminum with a textured off-white finish. SIDE VIEW XYZ-500-MIMT drawing FRONT VIEW Page 16 of 27

17 P/N A Controller with on motion card Height: 5" Nominal Base footprint: 9.5" X 8.0 Not including the joystick The Motorized CONTROLLER (P/N A-20411) will be offered with a joystick, power supply and one card to control 3 axis of movement. Up to 5 cards (A-20412) total can be included in the controller to control 5 separate 3 axis positioners. The controller can receive commands from the joystick or a personal computer. It has many features built in and customizable per application. VACUUM BASE FOR XYZ 500 SERIES P/N A Height:.375 Page 17 of 27

18 XYZ-500 MLMT Height: 4.60" Nominal Base footprint: 2.000" X Travel: X, Y =.500 Travel: Z axis =.500" Resolution: " ( mm) per step Motors: 5vdc,.42amp, Bipolar The XYZ-250-MLMT Micropositioner is intended for precise probing and instrumentation for industrial, medical, biological, semiconductor, and general scientific applications. It provides 3- axis motion with.500" movement on X, Y and Z. Motion is controlled by three precision stepping motors directly attached to our fabricated stainless slides. Precision high-quality 440 stainless steel ball bearings (cross roller bearings also available) allow precise linear motion on all three axis. Gibs and Slides are made of heat treated, ground, and 440-C stainless steel. Slide bases are made of dense aluminum with a black anodized finish. (Provisions for optical sensors) Page 18 of 27

19 XYZ-500 MLMT-C Height: 4.60" Nominal Base footprint: 2.000" X Travel: X, Y =.500 Travel: Z axis =.500" Resolution: " ( mm) per step Motors: 5vdc,.42amp, Bipolar The XYZ-500-MLMT-C is connectorized using (12 long leads) - SOCKET RECEPTACLE (AMP ) - SOCKETS (AMP ) - SHRINK TUBING 1/8 BLACK - EXPANDABLE SLEEVING 1/8 BLACK - LABEL PART NUMBER AND AXIS WITH LAMINATED LABEL PIN 1: RED COLOR WIRE - MOTOR A+ PIN 2: RED/WHITE WIRE - A COMMON PIN 3: GREEN WIRE - MOTOR B+ PIN 4: GREEN/WHITE WIRE - B COMMON Page 19 of 27

20 XYZ-300 TEST ARM OPTIONS Page 20 of 27

21 XYZ-300 TEST ARM OPTIONS CONTINUED XYZ-500 TEST ARM OPTIONS Page 21 of 27

22 XYZ-500 TEST ARM OPTIONS CONTINUED Page 22 of 27

23 XYZ-500 TEST ARM OPTIONS CONTINUED RF ADAPTERS AND SPECIAL PROBING OPTIONS Page 23 of 27

24 Test Arm Holders of Different Lengths and Drops Part #20545 Provides plenty of holes and adjustment in the adapter to move it or the probe around for the proper drop or rise in the probe. Part #20535 Allows mount any probe holders at 90 degrees from a normal mount. Part #20533 Straight Drop Part number #20533 allows a straight down drop from the end mount. Part #20508 Part number #20508 allows allows a 5 degrees of tilt. There is a thumb screw at the top of the channel to push against a spring loaded arm. The length and the height of the pivoting arm can be changed. Page 24 of 27

25 New revised A probe mounts. These come in 3, 4 and 5 lengths. It has app. 5 degrees of tilt. The part numbers are A , A , A The bottom bar can be cut down to make other lengths. Everything is on sliding mounts both vertical and horizontal. Coax probe arm semi flexible Part #20601 (needle included) The is isolated near the needle/probe for less capacitance. The clamping collet has three slots for holding the needle at 30, 45, 180 degrees. It is connected to 3 feet of 50 ohm RG 174 coaxial cable ended in a BNC male connector. The tubing is coated copper tubing that can be bent to many positions making a complete custom probe arm. Longer or shorter arms are available if a customer needs more or less reach. Part #20601-T (needle included) The T Triax version is the same physical size as the Coax version. The clamping collet has three slots for holding the needle at 30, 45, 180 degrees. It is connected to 4 feet of 50 ohm triax cable with a 3 lug triax male connector. Either probe can be mounted on all of our translation stages using various back plates. The Suss plate works well as does the plain back plate that is used in the and probe Page 25 of 27

26 Page 26 of 27

27 Part #20525 shown on a XYZ 500 Pin Dia:.187" Pin Length: Up to 6 Travel: Z axis and rotation Resolution: 48 TPI Part #20525 with Test Arm PART # Can be integrated with the XYZ-500 or XYZ 300 Course positioning of robe Page 27 of 27