onlinecomponents.com
|
|
|
- Randolf Lambert
- 5 years ago
- Views:
Transcription
1 Description Amphenol connectors are used in applications where maximum RF shielding and minimum noise radiation are required. Features/Benefits Available in 7/8-20 and 11/16-24 threading, C, BNC and TNC coupling provides customer flexibility in their design. 5000V peak with Teflon insulators allows for high temperature applications. Solder/Clamp assembly procedure requires no special crimp tools. Precision machined for consistent performance provides dependability. Applications MIL-Aerospace Air-frame Shipboard Specifications 174 7/8-20, 11/16-24 Specifications 175 C Specifications 176 BNC Specifications 177 TNC Specifications 178 BNC, 180 Polarity 179 -C Bayonet Lock 180 threaded 7/8-20, 11/ TNC threaded 7/
2 Specifications ELECTRICAL MECHANICAL Impedance Frequency range Voltage ENVIRONMENTAL Temperature range Weatherproof Non-constant (can be used with 50, 75 and 93 ohm triaxial cables) 7/8-20 &11/16-24 triax 300 MHZ -C. BNC -TNC: MHz 5000 V peak with TFE insulators 1900 V peak with styrene insulators TFE - 65 C to +165 C Copolymer of Styrene: - 55 C to +85 C except as noted, all are weatherproof Mating -BNC: Cable affixment MATERIAL Contacts Other metal parts Insulators styrene Clamp gaskets : 7/8-20 or 11/16-24 threaded coupling. -C and Bayonet lock -TNC: 7/16-28 threaded coupling Screw thread-nut and two braid clamps Male: brass Female & Outer beryllium copper. Silver plated. Brass: ASTROplate finish TFE or copolymer of Silicone rubber or synthetic rubber NOTE: These characteristics are typical and may not apply to all connectors. 174
3 7/8-20, 11/16-24 Specifications 7/8-20 PLUG 7/8-20 JACK A B C D E F G /16-24 PLUG 11/16-24 JACK A B C D E F G A B C D E F G A B C D E F G
4 C Specifications PLUG JACK A B C D E F G A B C D E F Notes: 1. Dimensions are in inches. 2. Metric equivalents are given for general information only and are based upon 1.00 inch = 25.4mm 3. Flared to meet gage test. 4. Flat or radius 5. A concave depression.100 (2.54mm) wide by.005 (.13mm) deep between studs is permissible. 6. Metric equivalents are in parentheses. 176
5 BNC Specifications PLUG JACK C See Note 1 D F G H J R NOTE 1: Flared to meet mating characteristic test. D AA J R S W Y Z
6 TNC Specifications PLUG JACK C F G H J K F J S W Y Z AA
7 BNC, 180 Polarity Fig. 1 Fig (12.7) L Plug Panel Receptacle PLUGS - MALE CONTACTS Cable Config Term Construction MTG CAI Plt. Ins. Amphenol Fig a b c Dia Hole Number RG-307A/U 75Ω 50Ω : Times TRF-58, Belden 9222, 72Ω Amphenol Plug two braid Mates with two C12 P33 D clamp bayonet studs180 (34.9) (14.3) (7.6) Plug two braid Mates with two C13 P15 D clamp bayonet studs180 (34.9) (14.3) (6.5) RECEPTACLES Config Term Construction MTG CAI Plt. Ins. Amphenol Fig In. (mm) a b c Dia Hole Number Panel Receptacle Solder cup & ground tab Two bayonet studs L P33 D apart (27.4) (17.5) (18.1) accommodates cable diameter.453(11.5).125(3.2) dia. 4 holes 179
8 C Bayonet Lock Fig. 1 Fig. 2 Plug Panel Receptacle PLUGS - MALE CONTACTS Cable Config Term MTG CAI Plt. Ins. Amphenol Fig a b c Dia Notes Hole Number 11 Type 59 Type Plug two braid clamps C23 P33 D (52.5) (19.1) (7.6) Plug two braid clamps C23 P33 D (52.5) (19.1) (8.6) RECEPTACLES - FEMALE CONTACTS Cable Config Term Construction MTG CAI Plt. Ins. Amphenol Fig Notes a b c Dia Hole Number accommodates cable diameter Panel Spade Lug Gasketed P P33 D Receptacle & Ground Tab (30.9) (25.4) (19.1) 180
9 Threaded, 7/8-20 and 11/16-24 Fig. 1 Fig. 2 C B C B Fig. 3 STRAIGHT PLUGS Straight Plug 53250, , Bulkhead Receptacles 34450, Mating Dims. Inches (mm) Cable Threads a b c e f Hole CAI PLT Ins. Number Fig 8 Type 7/ (52.0) 1.00 (25.4).505 (12.8) C15 P1 D1/D Type 7/ (52.0) 1.00 (25.4).475 (12.1) C15 P1 D1/D Coax RG-12 A/U 7/ (65.1) 1.00 (25.4).484 (12.3) C15 P1 D1/D A Type 11/ (42.1).781 (19.8).296 (7.5) C15 P1 D1/D / (42.1).781 (19.8).332 (8.4) C15 P1 D1/D STRAIGHT JACKS A B E Max. Panel Thickness A Mating Dims. Inches (mm) Cable Threads a b c e f Hole CAI PLT Ins. Number Fig 11 Type 7/ (50.8) 1.00 (25.4).475 (12.1) C15 P1 D / (44.5).750 (19.1).332 (8.4) C15 P1 D A Straight Jack BULKHEAD RECEPTACLES Mating Dims. Inches (mm) Cable Threads a b c e f Hole CAI PLT Ins. Number Fig 11/ (32.5) 1.00 (25.4).156 (4.0) Y P1 D / (32.5) 1.25 (31.8).156 (4.0) Z P1 D
10 Threaded, 7/8-20 and 11/16-24 Fig. 1 E Max. Panel Thickness Fig. 2 B BULKHEAD ADAPTERS Bulkhead Adapters Male Caps Mating Dims. Inches (mm) Threads a b c d e f Hole PLT Ins. Number Fig 7/ (44.5) 1.25 (31.8).709 (18.0).875 (22.2) P1 D / (44.5).937 (23.8).709 (18.0).689 (17.5) P1 D MALE CAPS A Mating Dims. Inches (mm) Threads a b c d e f Hole PLT Ins. Number Fig 7/ (20.6) 1.00 (25.4).144 (3.66) 5.00 (127) P / (19.8).813 (20.6).144 (3.66) 5.00 (127) P
11 TNC Threaded, 7/16-28 Fig. 1 Fig. 2 Fig. 3 Plug PLUGS - MALE CONTACTS Bulkhead Adapter Jack to Jack Bulkhead Jack Receptacle (12.8) dia. T.505(12.8) dia. Dims. Inches (mm) Cable Config. a b c e f Hole CAI PLT Ins. Number Fig Raychem 9530-D-5117 Plug 1.43 (36.3).625 (15.9).177 (4.5) C13 P15 D Times TBF-58 Plug 1.43 (36.3).625 (15.9).257 (6.5) C13 P33 D T.473(12.9).473(12.9) RECEPTACLES - FEMALE CONTACTS Dims. Inches (mm) MTG Amphenol Description Config. a b c e f Hole CAI PLT Ins. Number Fig Bulkhead Jack Receptacle Recep (30.5).690 (17.5).825 (21.0).250 (6.4) T P33 D ADAPTER Dims. Inches (mm) MTG Amphenol Description Config. a b c e f Hole CAI PLT Ins. Number Fig Bulkhead Jack to Jack Adapter 1.37 (34.8).730 (18.5).638 (16.2).187 (4.7).737 (1.87) T accommodates cable diameter 183
Triax Amphenol. Description Amphenol Triax connectors are used in applications where maximum RF shielding and minimum noise radiation are required.
Description Amphenol connectors are used in applications where maximum RF shielding and minimum noise radiation are required. Features/Benefits Available in 7/8-20 and 11/16-24 threading, C, BNC and TNC
MCX Amphenol. Description MCX. 50 Ohm Coaxial Connectors Specifications 18 Straight & Right Angle Crimp 19 Straight Solder & PCB 20-21
Description connectors conform to the European CECC 22220 Spec and was introduced in the 1980 s. While the uses identical inner contact and insulator dimensions as the SMB, the outer diameter of the plug
SMB Amphenol. 50 ohm Coaxial Connectors Specifications 36 Plugs 37 Jacks 38 Bulkhead Receptacles PCB Receptacles 41-43
Description The name derives from SubMiniature B (the second subminiature design). The was developed in the 1960 s. is a smaller version of the SMA with snap-on coupling. Amphenol s connectors conform
Assembly Instructions-C12 Amphenol Triax BNC, 180 Polarity
Assembly Instructions-C2 Amphenol Triax BNC, 80 Polarity Washer C Washer D Contact Inner Insulator E Inner Body F Inner Insulator G Body Nut Gasket Washer B Washer A (2 pcs. if needed) Teflon Washer 3-4774-3
SERIES MHV (H4) HIGH VOLTAGE CONNECTORS
SERIES MHV (H4) HIGH VOLTAGE CONNECTORS DESCRIPTION CONTENTS PAGE HUBER+SUHNER MHV connectors are coaxial miniature high voltage (MHV = Miniature High Voltage) connectors with 5 kv rms test voltage (mated
Broadcast. Use Solid Reliability. Return Loss Graph Lo-Pro. Environmental. Electrical. Contact. millohm
Tri-Loc Series Standardd & Lo-Pro Connectors Jacks and Plug ugs Lo-Pro Tri-Loc Connectors Full Crimp Procedure Broadcast Ideally Suited for Outdoor Use Solid Reliability Point-To-Point Solutions Specifications
Bodies Brass Nickel or Gold Gold Female: Beryllium copper Insulator Teflon N/A Crimp ferrule Annealed copper Nickel or Gold
Materials Connector part Material Finish Bodies Brass Nickel or Gold Center Contact Male: Brass Gold Female: Beryllium copper Insulator Teflon N/A Crimp ferrule Annealed copper Nickel or Gold Electrical
MicroMate (MMCX) Amphenol Specifications
Specifications ELECTRICAL CECC22000 Test Requirement Impedance 50 Ohm Frequency Range DC thru 6 GHz VSWR 4.4.1 SMT and Edgecard (Mated Pair) DC - 4 GHz 1.15 Max 4-6 GHz 1.40 Max Cabled Straight, Semi-Rigid
Type N connectors DIVIDER PAGE
Type N connectors DIVIDER PAGE 179 N interface dimensions E D REF. PLANE REF. PLANE C D ØF ØB ØA ØA ØB ØE SEALING GASKET.625-24UNEF-2B G C H MIN. FULL H J F G MIN. FULL "N", MALE, Mil-Std-348A Fig. 304.1.140.110
SMB Connectors Specifications Flexible Cable Bulkhead PCB Mount... 66
Section Index Connectors Specifications... 62 Flexible Cable... 64 Bulkhead... 65 PCB Mount... 66 Other Information Assembly Instructions... 176 Cable Assembly... 166 Cable Information... 168 Numerical
mcx connectors DIVIDER PAGE
mcx connectors DIVIDER PAGE 207 mcx interface dimensions A REF. PLANE A REF. PLANE B B C C H D D ØF ØG ØG ØF ØE ØE,, Design in accordance with CECC 22220 male, plug INCHES / MILLIMETERS 3 MINIMUM MAXIMUM
... A Vital Part of Connection World CMPTER. Cable Connectors PCB Connectors Assembly Instructions Mounting Holes MCX CONNECTORS
... A Vital Part of Connection World Cable Connectors PCB Connectors s Mounting Holes MCX CONNECTORS COPYRIGHT ELECTRONICS 0 MCX Series Coaxial Connectors DESCRIPTION MCX connector are developed in Europe
Table of Contents SMA CONNECTORS
Table of Contents 45 SMA Connectors 3 MMCX Connectors 50 Ohm Connectors Specifications...46 Quick Connect...49 Semi-Rigid & Flexible Cable...50 PC Mount...56 Bulkhead & Panel Mount...62 Self-Fixture End
2.92mm connectors DIVIDER PAGE
connectors DIVIDER PAGE 167 interface dimensions REF. PLANE F SEALING GASKET E NOTE 1 F REF. PLANE E G.312 HEX. ØD ØC ØB ØD ØC ØB ØA A.250-36 UNS-2B H.250-36 UNS-2A.170 FULL MALE, FEMALE, Mil-Std-348A
2.4mm connectors 155
connectors 155 interface dimensions REF. PLANE F SEALING GASKET E NOTE 1 F REF. PLANE E.312 HEX. ØA ØD ØB ØC ØD ØC ØB ØA M7 x 0.75-6g MALE, FEMALE, male, plug INCHES / MILLIMETERS 3 MINIMUM MAXIMUM LTR.
RP SMA Male Connector Crimp/Solder Attachment for RG174, RG316, RG188, PE-B100, PE-C100, inch, LMR-100
RP SMA Male Connector Crimp/Solder Attachment for RG174, RG316, RG188, PE-B100, PE-C100, 0100 inch, LMR-100 RF Connectors Technical Data Sheet PE4771 Configuration SMA Male Reverse Polarity Connector MIL-STD-348
SMB LOCK Introduction Characteristics Straight plugs Right angle plugs SMB limited detent (SMB-A) Receptacles...
CONTENTS PAGE SMB Introduction... 4 General... 5 Finder guide... 6 Interface... 7 Characteristics...8-9 Straight plugs...0- Right angle plugs...- Jacks... 3 Bulkhead jacks...4-5 Receptacles...6-7 PCB receptacles...
Distributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. Connectors Features Snap-on interface facilitates assembly Conforms to CECC
RF COAXIAL CONNECTORS, TYPE SMA, 50 OHMS (FEMALE CONTACT) ESCC Detail Specification No. 3402/002
Page 1 of 106 RF COAXIAL CONNECTORS, TYPE SMA, 50 OHMS (FEMALE CONTACT) ESCC Detail Specification Issue 5 June 2016 Document Custodian: European Space Agency see https://escies.org PAGE 2 LEGAL DISCLAIMER
RP SMA Female Connector Crimp/Solder Attachment For RG178, RG196
RP SMA Female Connector Crimp/Solder Attachment For RG178, RG196 TECHNICAL DATA SHEET PE4799 RP SMA Female Connector Crimp/Solder Attachment For RG178, RG196 Configuration Connector Connector Specification
SMA CONTENTS PAGE 9-3
CONTENTS PAGE SMA Introduction... 4 General... 5 Finder guide...6-7 Interface... 8 Characteristics...9-10 Straight plugs...11-12 Right angle plugs...13-14 Straight jacks... 14 Straight flange jacks...14-15
75 Ω BNC Style Connector
7 Ω BNC Style Connector Frequency Range Characteristic Impedance 7 Ω FETURE 7 Ω of BNC style connector BNC style connectors can be mated. Bayonet coupling mechanism for reliable connection. ock Type Bayonet
TNC Series Series C TN 114
TNC Series TNC Series 114 TNC Interface Mating Dimensions (Per MIL-STD-348) TNC Interface Dimensions MALE Inches/Millimeters 3 Minimum Nominal Maximum LTR in. mm in. mm in. mm A.440 11.17 B.314 7.98.315
MCX Connectors Specifications Flexible Cable Semi-Rigid Cable Panel Mount PCB Mount... 22
Section Index Connectors Specifications... 17 Flexible Cable... 19 Semi-Rigid Cable... 20 Panel Mount... 21 PCB Mount... 22 Other Information Assembly Instructions... 176 Cable Assembly... 166 Cable Information...
Amphenol RF Interconnects
1.6/5.6 Miniature 75 ohm coaxial connectors continued Right Angle Bulkhead Jack for PCB Plug to Plug Adapter Plug to Plug U Link Adapter 1566252M1N3GT3G75 1562071A1N3GT3G75 1562076A1N3GT3G75 1566252M01RFX
Ultra Miniature Snap-on Coaxial Connector (PC Card Type 2 Mountable)
Ultra Miniature Snap-on Coaxial Connector (PC Card Type 2 Mountable) MMCX Series Right-angle Receptacle Features 1. Snap-on coupling mechanism makes it easy to engage and disengage. The rugged snap-on
BLINDMATE CONNECTORS AND COMPONENTS. Selection Guide BMA BMMA BMZ BZ
BLINDMATE CONNECTORS AND COMPONENTS SV Microwave, Inc. is a world leader in the RF/microwave industry. We design and manufacture coaxial connectors, cable assemblies, attenuators, terminations, and custom
RF COAXIAL CONNECTORS, TYPE SMA, 50 OHMS (MALE CONTACT) ESCC Detail Specification No. 3402/001
Page 1 of 68 RF COAXIAL CONNECTORS, TYPE SMA, 50 OHMS (MALE CONTACT) ESCC Detail Specification Issue 3 January 2014 Document Custodian: European Space Agency see https://escies.org PAGE 2 LEGAL DISCLAIMER
Multi-Flex Low Loss, Pre-Connectorized Cable Sets, DC~18 GHz, MF02-Series
MultiFlex Low Loss, PreConnectorized Cable Sets, DC~18, MF02Series for rugged military, defense and T&M applications upto 18 use reliable performance, dependable service MF02Series Preconnectorized Cable
Interface Mating Dimensions
SMP Coaxial Connectors SMP Coaxial Connectors SMP Connectors Interface SMPM Cable Connectors SV Microwave offers a complete line of SMP connectors that conform to DSCC 94007, 94008 and MIL-STD-348. The
- (90 - f (GHz)) db (.05 SQT(f(GHz))) db
TNC Specifications to MIL-C-39012 The specifications below are general specifications for all TNC connectors. Specific Data for VSWR, Insertion Loss, R.F. leakage, etc., are available from the factory
Professionals Trust Pomona Performance
Professionals Trust Pomona Performance Test and Measurement Calibration RF Audio / Video / Broadcast Automotive Telecom 2008-2009 RoHS Table of Contents 2 3 New Products 5 Customized Products 6 Coaxial
Interface Mating Dimensions
SMPM Coaxial Connectors SMPM Connectors DC - 65 GHz SV Microwave offers a complete line of SMPM connectors. SMPM connectors, a push-on mating design, provide microwave performance through 65 GHz and offer
SERIES BMA, SUBMINIATURE BLIND MATE CONNECTORS
SERIES, SUBMINIATURE BLIND MATE CONNECTORS DESCRIPTION CONTENTS PAGE HUBER+SUHNER blind mate connectors open up special dimensions in microwave applications up to 18 GHz. HUBER+SUHNER offers a range of
Wiring Assembly Instructions Section 5 P/N CASS P/N 1899AS RG316 P/N CASS P/N 1899AS RG316
Ver. 2.7 CASS USER S MANUAL VPC Tools Required For the assembly of the Mini-Coaxial Contact(s) VPC P/N 610 103 115/CASS P/N 1899AS284-01 and/or P/N 610 103 159/1899AS284-04 the following parts are required
Our Most Important Connection is with You. SECTION 2 SMPM / SMP / SMP-LOCK / SMP-COM R201 / R222 / R222L / R2229
SECTION 2 SMPM / SMP / SMP-LOCK / SMP-COM R201 / R222 / R222L / R2229 Contents SMPM Introduction... 2-4 Interface... 2-5 Characteristics... 2-6 Plugs and Jacks... 2-7 Receptacles and panel shrouds... 2-8
Termination Procedures for Triaxial Connectors D , D , and D
Page: 1 of 7 Termination Procedures for Triaxial Connectors D-621-0001, D-621-0002, and D-621-0003 1. Scope This standard covers the procedures for terminating triaxial and twinaxial cables to the triaxial
EN3716 SAE AS81659 ARINC
6 DSX RTX Series series SAE AS81659 EN3716 ARINC 404 Page Introduction... 6-4 Applications... 6-5 DSX SAE AS81659 Product overview... 6-6 Technical characteristics :... 6-7 & 6-8 Electrical... 6-7 Mechanical
General Information... Temperature/Resistance Table... Part Numbering Examples for RTD s. High Temperature MgO Elements (RA)...
Page General Information... Temperature/Resistance Table... Part Numbering Examples for RTD s High Temperature MgO Elements (RA).... Leadwire Style RTD s (RB).. Leadwire Style RTD s (RD, RE, RF, or RG
Electrical Test voltage (Vrms) Service sea level at m M I II
8LT eries Applications High density connectors for all military and aeronautical purposes. tandards MIL-C 38999 eries I - QPL approved NC 93422 HE 308 DTAT-C 5935 X 0005 (HE 308 standard) GAM/T1 list Description
FAKRA Jack Right Angle Connector Crimp/Solder Attachment for RG174, RG316, RG188,.100 inch, PE-B100, PE-C100, LMR-100, White Color
FAKRA Jack Right Angle Connector Crimp/Solder Attachment for RG174, RG316, RG188, 100 inch, PE-B100, PE-C100, LMR-100, White Color PE44648B Configuration FAKRA Jack Connector 50 Ohms Right Angle Body Geometry
SMA Male Connector Solder Attachment for RG188-DS, RG316-DS
SMA Male Connector Solder Attachment for RG188-DS, RG316-DS RF Connectors Technical Data Sheet PE4402 Configuration SMA Male Connector MIL-STD-348A 50 Ohms Straight Body Geometry Features Max Operating
NUMBER SIDE VIEW DESCRIPTION RANGE DIAMETER C F in. pf/ft. Coaxial, low noise, orange, PVC jacket
NUMBER SIDE VIEW DESCRIPTION RANGE DIAMETER C F in. pf/ft. J1 Coaxial, low noise, orange, PVC CABLES 55 to 80 67 to 176 0.088 cables & connectors J3 Coaxial, low noise, high temperature, red, Teflon 100
MG RANGE CONTENTS. General Specification Shell Styles... 4, 5, 6. Ordering Information Connectors... 7
CONTENTS General Specification........ 3 Shell Styles..... 4, 5, 6 Ordering Information Connectors... 7 Ordering Information Protective Caps... 8 Ordering Information Square Gaskets... 8 Insert Configurations.
K CHAPTER FREEDOM TM SERIES EASY MATING EASY CLEANING EASY INTEGRATION FISCHER KEY FEATURES
K CHAPTER FISCHER TM SERIES EASY MATING EASY CLEANING EASY INTEGRATION KEY FEATURES No key code: 360 mating freedom & optimized cable management Membrane-sealed contacts (patent pending) Low profile IP68
T E C H N I C A L O V E R V I E W LEMO S REMOTE HANDLING CONNECTORS N SERIES
T E C H N I C A L O V E R V I E W LEMO S REMOTE HANDLING CONNECTORS N SERIES I NTRODUCTION LEMO s N Series connectors are ideally suited for remote handling in nuclear environments. Main Features Push-pull
Our Most Important Connection is with You. SECTION 17. Tooling & Accessories R280 / R282
SECTION 17 Tooling & Accessories R280 / R282 Contents Joule effect soldering devices... 17-4 Stripping tools...17-4 and 17-7 Point gauges... 17-4 Soldering... 17-5 Installation tools...17-5 to 17-6 Cassettes...
RECTANGULAR CONNECTORS PER ARINC 404 RM-RME SERIES
Rev. C, March, 2016 RECTANGULAR CONNECTORS PER ARINC 404 RM-RME SERIES Connectors with wide range of shell configurations/modifications, contact arrangements and contacts to meet ARINC 404 Specification
AMPLIMITE* HDP- 20 and Economy
AMPLIMITE* HDP- 20 and Economy Application Specification Crimp Snap Subminiature D 114-40030 Commercial s 05 MAY 11 Rev D NOTE i All numerical values are in metric units [with U.S. customary units in brackets].
LMR-195-LLPX. LMR -195-LLPX Flexible Low Loss Plenum Coax TIMES MICROWAVE SYSTEMS
LMR-195-LLPX LMR -195-LLPX Flexible Low Loss Plenum Coax Ideal for Indoor/Outdoor Plenum Feeder runs Drop in replacement for RG-142 UL/NEC/CSA rated CMP/FT6 (listed under UL file #E-170516) Any wireless
FISCHER FREEDOM TM SERIES
K CHAPTER FISCHER TM SERIES EASY MATING EASY CLEANING EASY INTEGRATION KEY FEATURES No key code: 360 mating freedom & optimized cable management Membrane-sealed contacts (patent pending) Low profile IP68
Operating voltage up to 5 kvdc Operating current up to 4,5 A 2-6 high voltage contacts Quick and easy assembling Protection class IP68 acc.
Operating voltage up to 5 kvdc Operating current up to 4,5 A 2-6 high voltage contacts Quick and easy assembling Protection class IP68 acc. DIN EN 60529 General characteristics and technical data Series
Operating voltage up to 5 kvdc Operating current up to 4,5 A 2-6 High voltage contacts Quick and easy assembling Protection class IP68 acc.
Operating voltage up to 5 kvdc Operating current up to 4,5 A 2-6 High voltage contacts Quick and easy assembling Protection class IP68 acc. DIN EN 60529 General characteristics and technical data Series
SMC SERIES Subminiature Coaxial Connectors
SERIES Subminiature Coaxial Connectors FEATURES Subminiature coaxial connectors with 50 Ω impedance for applications up to 0 GHz. (screw on mechanism)fulfills the subminiature coaxial connector requirement
Assembly, Installation, and Removal of Contacts and modules
Assembly, Installation, and Removal of Contacts and modules FOR 20/26 GHz coaxial CONTACTS AND MODULES Table of Contents Section 1 Receiver Contact Assembly instructions Section 2 ITA Contact Assembly
8D Series D38999 Stainless Steel Series
Connector part numbers Basic Series 8D 0-11 K 35 P N L Locking type: None: Receptacle or plug with standard locking V: Plug with reinforced locking Shell style: 0: Square flange receptacle 7: Jam nut receptacle
ASSEMBLY, INSTALLATION, AND REMOVAL OF CONTACTS AND MODULES
ASSEMBLY, INSTALLATION, AND REMOVAL OF CONTACTS AND MODULES FOR 20/26 GHz COAXIAL CONTACTS AND MODULES Table of Contents SECTION 1 RECEIVER CONTACT ASSEMBLY INSTRUCTIONS SECTION 2 ITA CONTACT ASSEMBLY
N Series. N Type Connectors CONFORMING STANDARD SPECIFICATION MATERIAL/FINISH JIS-C-5411 MIL-C-39012
N Type Connectors N series is the most practical coaxial cable connectors for 7mm (inner diameter of outer conductor) of 50Ω group. High frequency performance is superior. Many types of connectors are
ER TRANSIT PARTS MANUAL. Cooling Section. Page 7-1. Cooling 05/97
Cooling Page 7-1 Plumbing Cummins 6BTA/6BG Page 7-2 Cooling Plumbing Cummins 6BTA/6BG 1 62190751 1 Tube - Coolant, Lower Radiator 2 61190162 3 Clamp - 2 1/16" - 3" 3 61190422 1 Hose - Rubber, Curved 2
HyperGrip - Push/Pull Plastic Circular Connectors
A B C D E F G H J K HG2 HG3 HG4 Ø1.014 [25.76] 1.220 [30.98] Ø0.866 [22.00] 0.272 [6.91] 1.637 [41.59] 3.265 [82.93] Ø0.502 [12.75] Ø0.656 [16.66] 2.700 [68.56] 3.724 [94.60] Ø1.172 [29.77] 1.137 [28.87]
8N45S NC Series Non-safety classified connectors for EPR reactors
Description Quick-connect ¼ turn bayonet coupling mechanism Straight backshell with sealing gland and cable clamp Integrated 60 ground termination mechanism compliant with EPR reactors wiring specifications
Galley Connectors. Intermateable and Interchangeable Ability to mate with other ARINC 810 galley connectors in the market
Galley Connectors Intermateable and interchangeable with other ARINC 810 galley connectors, Amphenol Pcd s APeX Galley Connector, Rectangular is a reliable, robust, connector that uses overmold technology
Amphenol 348 Series High Density Connectors
348 Series High Density Connectors 12-093-6 348 Series I, II Table of Contents 348 Series Page No. High Density Connectors........................................................................ 1 Specifications.................................................................................
D X X - XX - XX - X X
CONSTRUCTION MATERIAL FINISH Shell Alluminium Alloy Cadmium Olive Drab over Electroless Nickle Electroless Nickle Insert Engineering Plastic Natural O-ring Silicone Rubber Natural Contact Retainer Beryllium
HPH PCB/MALE CABLE HPH SERIES PERFORMANCE/SPECIFICATION
PCB/ CABLE Straight TBS, R/A TBS, male crimp, Flex SMT, solder bucket, stacking, pin carrier Pin size/current: 0.6mm/4 amp Pitch: 1.905mm/0.075" on a staggered pitch of 0.953mm/0.0375 No. of contacts:
Product accessories. Accessories HUBER+SUHNER
Product accessories Gas discharge tube (GDT) 134 Gas discharge tubes 135 SEMPER GDT units 136 Definitions 137 Selection of a suitable gas discharge tube 137 138 Protective caps 138 Mounting wacher nut
Castellated/Hex Nut. Insert Retaining Ring. Contact Insert
Castellated/Hex Nut Seals Snap-on Connection for Flexible Straps & Covers Insert Retaining Ring Contact Insert Sealing Cap Clip Gland Cage Insert Retaining Ring Contact Insert Locking Ring Flex Body Moulding
General characteristics and technical data Series MCS
MOD M MC MCS VP 100 S Operating voltage up to 5 kvdc Operating current up to 4,5 A 2-6 high voltage contacts Quick and easy assembling Protection class IP68 acc. DIN EN 60529 General characteristics and
CASS Interface System Parts Section 1
Ver. 2.7 CASS USER S MANUAL Receiver CASS Interface System Parts Section 1 VPC P/N CASS P/N Description 310 115 101 1899AS265-01 CASS Receiver Interface, accepts 19 Modules Interface Device VPC P/N CASS
DEUTSCH HDJ Series Filter Connectors MIL-DTL SERIES I.5
DEUTSCH HDJ Series connectors are subminiature environment-class connectors with high and medium-density insert arrangements. They are based on MIL-DTL-38999 Series I coupling interface lengths and Series
Amphenol. eries SJT. Series SJT. VG 96912, Series 1 PAN JN 1003
Amphenol eries SJT Series SJT VG 96912, Series 1 PAN 6433-2 JN 1003 Ordering information Ordering example: SJT G 06 RT 14-35 P A 014 Series (p. 9, 15, 18) SJT Scoop proof (100% scoop-proof) Junior (Miniature
8STA/8TA Series. Compact Circular Connectors Derived from MIL-DTL & JN1003. Connection Technologies
8STA/8TA Series Compact Circular Connectors Derived from MIL-DTL-38999 & JN1003 Connection Technologies 8STA/8TA Series Contents Overview Presentation... 06 Applications... 06 Features & benefits... 07
Insulator Connector inserts: Polyamide (PA66) UL 94 V0 All connectors with different shielding material for different jacket and shield diameters.
Technical Data Shell material Machined components: die cast components: Shell plating: Cable entry: Copper-Zinc alloy (CuZn) Zinc (GD-Zn) Nickel (Ni) plated max. 18 mm Insulator Connector inserts: Polyamide
ASSEMBLY, INSTALLATION, AND REMOVAL OF CONTACTS AND MODULES
ASSEMBLY, INSTALLATION, AND REMOVAL OF CONTACTS AND MODULES FOR MICRO COAXIAL CONTACTS AND MODULES TABLE OF CONTENTS SECTION 1 RECEIVER CONTACT ASSEMBLY INSTRUCTIONS SECTION 2 ITA CONTACT ASSEMBLY INSTRUCTIONS
MMBX / MCX series R223 / R113 / R213
4 MMBX / MCX series R223 / R113 / R213 CONTENT Pages MMBX Introduction... 4-4 to 4-6 Interface... 4-7 Characteristics... 4-8 Plugs... 4-9 Receptacles... 4-9 to 4-10 Adapters... 4-11 emo board... 4-12
Contents. Cable assemblies, Model 10.
Contents Cable assemblies, Model 10...33 Flying leads, Pigtails A11 Cable assemblies, Model 10 Main Characteristics Choice of connectors to interface with various sensor Choice of cable to suit various
FAKRA-Comliant SMB 50-Ohm Inline Connectors 27 JUN 11 Rev E
Application Specification 114-13069 FAKRA-Comliant SMB 50-Ohm Inline Connectors 27 JUN 11 NOTE i All numerical values are in metric units [with U.S. customary units in brackets]. Dimensions are in millimeters
Cheminax RF Coaxial Cables and RF Connectors
Cheminax RF Coaxial Cables and RF Connectors QUICK REFERENCE GUIDE Convenient Lightweight, small diameter Extended temperature range High Performance High flexibility Low capacitance Low attenuation HIGHER
Shell material Insulator Contacts Sealing Temperature Mating Protection
Technical Data Shell material Machined components: die cast components: Shell plating: Cable entry: Copper-Zinc alloy (CuZn) Zinc (GD-Zn) Nickel (Ni) plated max. 10 mm Insulator Connector inserts: Polyamid
MCX SERIES. Description. Applications. Microminiature Coaxial Connectors
MCX SERIES Microminiature Coaxial Connectors Description Jy Chyun MCX Series connectors are ideal for applications and designs where weight and space savings are critical. This series has a 50 ohm impedance
1000 Series Miniature Slide Switches
Miniature Switches Features/Benefits Variety of actuators and terminations Panel mount tabs available Epoxy terminal seal compatible with bottom-wash cleaning RoHS compliant Typical Applications Test &
BNC and MHV SHV-5 and SHV-10 SHV-20 and SHV-B
Coaxial is the description for electrical feedthroughs with parallel and concentric conductor paths, and with the inner most conductor path electrically isolated from the vacuum flange. Grounded Shield
PPT 802, Proximity Probe Transducer System
PPT 802, Proximity Probe Transducer System PPH 080 : Proximity Probe Head PEC 036 : Probe Extension Cable PRD 020 : Proximity Probe Driver Feature Non-contacting measurement system based on eddy current
PERFORMANCE SPECIFICATION SHEET ADAPTER, CONNECTOR, COAXIAL, RADIO FREQUENCY. (BETWEEN SERIES BNC TO SERIES TNC), CLASS 2, STRAIGHT PLUG
INCH-POUND MIL-PRF-55339/38A 10 January 2005 SUPERSEDING MIL-PRF-55339/38 11 January 1977 PERFORMANCE SPECIFICATION SHEET ADAPTER, CONNECTOR, COAXIAL, RADIO FREQUENCY. (BETWEEN SERIES BNC TO SERIES TNC),
Standard Buccaneer IP68 BUCCANEER FOR POWER BUCCANEER POWER
IP68 Castellated/Hex Nut Seals Snap-on Connection for Flexible Straps & Covers Insert Retaining Ring Insert Retaining Ring Contact Insert Locking Ring Flex Body Moulding Contact Insert Sealing Cap Clip
smpm connectors DIVIDER PAGE
connectors DIVIDER PAGE 95 interfaces socket (adapter).068 MIN..023 CONTACT ACCEPTS.012 +/-.001 PIN x.050 LONG.110.095 CENTER CONTACT FLUSH TO.008 RECESSION FEMALE, JACK pin (shroud) Mil-Std-348A Fig.
FLEXIBLE LOW LOSS COMMUNICATIONS COAX
FLEXIBLE LOW LOSS COMMUNICATIONS COAX LMR -100A Drop In Replacement For RG-316 / RG-174 LMR-100A-PVC LMR-100A-PVC500-500' Spool LMR -195 Drop In Replacement For RG-58 / RG-142 LMR-195 LMR-195-500 - 500'
Plug (male) Jack (female) Interface dimensions conformable to the standards: min. max. min. max. A B C D E H I
Plug (male) Plug Jack min. max. min. max. A B C D E H I Jack (female) Interface dimensions conformable to the standards: 279 Electrical data Requirements Mechanical data Requirements Environmental data
Coaxial Cable Attenuation Charts A compilation of some of the most common coaxial cable attenuations. Nominal attenuation of 30.
A compilation of some of the most common coaxial cable attenuations. Nominal attenuation of 30.5 metres (100ft) Cable Type 70-85 MHz 148-174 MHz 400-520 MHz 806-960 MHz 2.4-2.45 GHz 5.8-5.85 GHz RG178B/U
Adjustable Bayonet Thermocouple
Adjustable Bayonet Thermocouple 3 16 Diameter is standard 1 2 Probe Length is standard Lead Length Termination Easily obtaining a desired probe depth, the adjustable bayonet sensor uses a tension spring
SWATI ANTENNA STUDS. Part No. SCBRA910H SCB900 SCB930SS
ANTENNA STUDS HEAVY-DUTY LUG STUD STANDARD SO239 STUD SCB900 SCB901 NO TERMINAL WITH TERMINAL SCB910 HEAVY-DUTY DOUBLE HEX SO239 STUD REPLACEMENT PARTS SCB910H DHN-38 NYW-38 ST-38 CHROME PLATED DOUBLE
Electrical Voltage rating Test Voltage (Vrms) service rating sea level at 21000m M N I II
JVS ronze Series pplications Navy vessels - Military - Merchant fleet - Transportation - Oceanography - attle-field cables, shelters - Signalling - ield equipments Standards MIL- 38999 Series III 75 201.002
Thermocouples. General Applications Tube and Wire. Performance Capabilities. Features and Benefits. Typical Applications. Construction and Tolerances
Watlow is a world class supplier of temperature measurement products, with more than 90 years of manufacturing, research and design expertise. Companies engaged in critical process control of food and
SP Series - Part Numbering
SP Series - Part Numbering Features Push-pull self latching technology Ultra precision High contact density High reliability / durability High vibration and outer force resistance Applications Telecommunications
Thermocouples. General Applications Tube and Wire. Thermal Devices, Inc. Mount Airy, Maryland USA
Watlow is a world class supplier of temperature measurement products, with more than 90 years of manufacturing, research and design expertise. Companies engaged in critical process control of food and
C&K 1000 Series Miniature Slide Switches
Miniature Switches Features/Benefits Variety of actuators and terminations Panel mount tabs available Epoxy terminal seal compatible with bottom-wash cleaning RoHS compliant Typical Applications Test &
Assembly Instructions-C70 Amphenol MMCX
Assembly Instructions-C70 Amphenol All parts of the connector are shown. Strip the inner conuctor, ielectric, an jacket as per RECOMMENDED CABLE STRIPPING DIM S in catalog. Slie the INSULATOR onto inner
FEATURES. ~ Compression resistant low loss, low density dielectric. ~ Quadraform shielding. ~ Highly reliable soldered connections
TRUE BLUE Low Loss cable assemblies The Answer: An unmatched combination of low loss, durability, and value. The Question: What does Storm s True Blue line of cable assemblies provide? For more than 30
17 TW SERIES. Hybrid Connector SPECIFICATIONS: MATERIALS AND PLATINGS ELECTRICAL DATA CLIMATIC DATA MECHANICAL DATA
17 TW SERIES Hybrid onnector mphenol s 17TW series hybrid -Subminiature connectors are available with power, coax, high voltage and signal contacts assembled in the same connector body. These connectors
1Rack and Panel Connectors
Rack and Panel Connectors Table of Contents RINC 600 Connectors Introduction............................................................2 Ordering Information.....................................................3