Contents. Cable assemblies, Model 10.
|
|
|
- Winifred Owens
- 5 years ago
- Views:
Transcription
1 Contents Cable assemblies, Model Flying leads, Pigtails A11 Cable assemblies, Model 10 Main Characteristics Choice of connectors to interface with various sensor Choice of cable to suit various environment -55 C to 20 C maxi (-7 F to 500 F) Rugged construction for harsh environment Conduit or stainless steel overbraid protection A13 A14 Overbraid (1) WA N/A Description 10 series are cable assemblies to interface with a variety of industrial sensors. Typical application is to connect a sensor to a junction box or directly to the signal conditioner. It allows to get out in a cooler and less exposed environment where a standard multipair low cost cable could be used. A15 Conduit (1X) Flying leads, Spade lug, 125 C A21 Ordering information To order specify part number, options and suffix : CC - DD (EE) Special Version : (EE) is a deviation suffix. Omitted for standard version Special Engraving : Add ZXX at the end of the part number. (XX is a number supplied by VibraSens) : Connectors A23 A24 A25 Sensors Overbraid (1) Conduit (1X) MIL-C-55-2 sockets - Field installable - MS 310F Aluminum, cadmium olive with silver plated solder contact IP4 - Operating continuous :125 C Industrial B WA N/A Cable Assembly Termination Blunt cut B02 AB Connector only : order WB 4X X A None B03 A03 A04 Overbraid (1) WA N/A Overbraid (1) A05 Conduit (1X) 3
2 Cable Assembly MIL-C-55, AISI 31L (V4A) IP 7 - Operating continuous :125 C Pulp and paper Wet location Available variant : =B11, C11 M12, IEC Gold plated contacts, PA self extinguishing housing, stainless steel AISI 31L nut. Permanent monitoring, field installable, corrosive industrial environment.. Fit accelerometer with M12 connector. B13 AB size 10SL-4S, 2 gold plated Sockets Overbraid (1) WB E1 Connector only : order C13 AC size 10SL-3S, 3 gold plated Sockets Overbraid (1) WC E3 Overbraid (1) M12, IEC Gold plated contacts, nickel plated Brass self securing locking nut, Polyurethane overmolding. Permanent monitoring, standard industrial environment.. Fit accelerometer with M12 connector. E E02 E4 E81 AE Connector only : order WE E04 E31 AE WE 31 E83 Overbraid (1) E84 E34 M12, IEC Gold plated contacts, PVC, SSTL31L (V4A) locking nut. Permanent monitoring, corrosive industrial environment. Fit accelerometer with M12 connector. Available variant : =E14 (conduit), E42 (angled), E44 (angled + conduit) E12 AE WB 32 M12, IEC CuSn plated contacts, PA self extinguishing housing, Permanent monitoring, field installable, standard industrial environment. Fit EXX connector. H51 Connector only : order M12, IEC Gold plated contacts, PA self extinguishing housing,, stainless steel AISI 31L nut. Permanent monitoring, field installable, corrosive industrial environment. Fit EXX connector. M12, IEC CuSn plated contacts, PA self extinguishing housing, self securing locking nut. Permanent monitoring, field installable, standard industrial environment. Fit accelerometer with M12 connector. H1 H4 E51 E71 AE Connector only : order WE Connector only : order
3 WI 02 Datalogger cable 7/1 27 UNS 2A, 2 Sockets, AISI 303 Operating continuous : 20 C Permanent monitoring, aero and industrial gas turbine Fischer, pins, Brass nickel plated, gold plated contacts IP 4 - Operating continuous : 250 C SKF datalogger IP 4 Connector only : order.- I02 AI02 D02 Fischer 103 A 05 ( contacts) Lemo, K serie, size 1, Brass nickel plated, gold plated contacts IP 4 - Operating continuous : 250 C Entek / IRD datalogger IP 4 D D13 WD AD WK 02 K02 IP 4 - Overbraid (1) AK02 D14 FGG.1K.307 (7 contacts) Amphenol ECTA 133, gold plated pins, push pull, aluminum nickel plated IP Operating continuous : -40 C to +125 C db - Metravib datalogger IP 4 - Conduitg (155) M02 IP 7 - Conduitg (170) Mil-C-2482, 3 pins, bayonet Applications : special vibration sensor with 3 Pins Bayonnet connector Amphenol C091 A, gold plated pins, plastic shell, screw locking IP Operating continuous : -40 C to +85 C Schenck / Bruel & Kjaer datalogger G02 N02 Lemo, S serie, size 0 - Brass nickel plated, gold plated contacts IP 4 - Operating continuous : 250 C Gas turbine connection of piezoelectric differential accelerometer Customer / Specific application Amphenol, C1-1, 4 gold plated pins (03), Nylon PA. IP 7 - Operating continuous : 125 C Metso sensodec, pulp and paper L02 AL02 FFA.OS.302 P03 WD WP 11 P13 AP Overbraid (1) L22 AL22 Lemo, B serie, size 1, Brass nickel plated, gold plated contacts IP 7 - Operating continuous : 250 C test bench connection of piezoelectric differential accelerometer A.OS.302 BNC, Gold plated contacts, Brass Nickel plated IP 4 - Operating continuous : 80 C F WF F02 AF TNC, Gold plated contacts, 80 C IP 4 - Operating continuous : 80 C T WF T02 WD J02 4X X 4X X fig AJ02 FGG.1B.302 Note, wiring : : Connected to connector shell : Not Connected to connector shell : Protection (Overbraid or conduit) Connected to connector shell : Protection (Overbraid or conduit) Not Connected to connector shell Note (Protection) (1) Overbraid AISI 31L (151) Conduit AISI 304, PNR 002., d=5mm (152) Conduit AISI 304, PNR , d=mm 5 Cable Assembly D15
4 Cable Assembly (153) Conduit AISI 304, PNR , d=7mm (154) Conduit AISI 304, PNR , d=8mm (155) Conduit AISI 304, PNR , d=9.5mm (11) Conduit AISI 321, leak proof, rugged, PNR , d=8.7mm (171) Conduit AISI 31L, leak proof, standard, PNR 002.1, d=9.mm CC : Cable CC Type PNR Material T Dia (1) ed Twisted pair Polyurethane Teflon FEP ed Twisted Triples 90 C d4.9 (d5.7) 200 C d4.7 (d5.5) Radox 120 C d4.3 (d5.1) Teflon FEP 200 C d4.7 (d5.5) Radox 120 C d4.5 (d5.3) Low noise. Twisted pair ed 4 Conductors Teflon PTFE tape Polyurethane black 250 C d C d PVC 90 C d Low noise Coaxial Teflon PFA extruded 20 C d2.0 Note Low cost with good oil & fluid resistance improved oil & fluid resistance Flame retardant halogen free improved oil & fluid resistance Flame resistant & retardant halogen free 2 Low noise treatments Low cost with good oil & fluid resistance Flexible cable 0.34mm^2 Low cost with excellent chemical resistance Flexible cable 0.34mm^2 Low noise treated. RGL19 CC 1 Type PNR Material T Dia (1) Spiral 020.xx Polyurethane 90 C d5 Note Spiral, 4x0.25 mm^2 shielded See note (11). Stock : 0.5 and 1 metre (1) Diameter in bracket are for cable with overbraid (11) For spiral cable, DD is extended length. (Divide by 4 for non extended length). DD : Length DD Enter length in metres. Standard length : 02, 05, 10, 15, 20, 30 metres. (EE) : Deviation suffix Call us to define your deviation suffix for special stripping, length, engraving,... Ordering example : 10.-B-A--05 Cable assembly, MIL-C-55, 5 meters Polyurethane cable SPECIFICATIONS Electrical Resistance Between leads...>1gohms Between either leads to shield...>1gohms Capacitance...See cable specification Environmental Temperature See table above for the temperature rating of each component. Physical Drawing...See drawing Below Acceptance, tests performed Resistance (@100VDC) Between leads...>1gohms Between either leads to shield...>1gohms Checked according to the wiring schematic Repair Call factory for info DRAWINGS, ARRANGEMENTS AB (MIL-C-55 2-Pole) PVC 80 C d PVC 80 C d Teflon 200 C FEP d1.1 Coaxial Teflon FEP 200 C d1.9 co- RG 174 RG 58 C/U Miniature axial RG178 AC (MIL-C-55 3-Pole)
5 Key 5 1 Pin AD (7/1 27 UNS) AI02 (Fischer S 103 A05) AI02 (Fischer 103 A 05) AP (C1-1) AL02 (Lemo FFA.0S.302) DRAWINGS, WIRING N1 N2 N3 N4 CC=, 02 White Red CC=03 White (1) White (2) CC=12 White Red Black -- CC=13 White (1) White (2) White (3) -- CC=22 White Blue CC= Blue Black White Brown C C = 4 X, Conductor CC=1 Green Yellow White Brown AL22 (LEMO A.0S.302) Cable Assembly WA AF (BNC, TNC) WB (MIL-C-55 10SL-4S) AJ02 (Lemo FGG.1B.302) WC (MIL-C-55 10SL-3S) AK02 (Lemo FGG.1K.307) WD (7/1 27 UNS 2A, Lemo A.0S.302, FFA.0S.302, FGG.1K.302) 7
6 Cable Assembly WP11 (C1-1) WP12 (C1-1) WE (M12) WF (BNC & TNC) WK02 (Lemo FGG.1K.307) N3 (Y) N2 (X) 4 5 N1 (GND) N4 (Z) If WI02 (Fischer 103 A 05) 8
A full spectrum of custom cables
A full spectrum of custom cables A full spectrum of custom cables Wilcoxon builds cables to your specifications and our exacting standards Industrial process Predictive maintenance Condition based monitoring
NUMBER SIDE VIEW DESCRIPTION RANGE DIAMETER C F in. pf/ft. Coaxial, low noise, orange, PVC jacket
NUMBER SIDE VIEW DESCRIPTION RANGE DIAMETER C F in. pf/ft. J1 Coaxial, low noise, orange, PVC CABLES 55 to 80 67 to 176 0.088 cables & connectors J3 Coaxial, low noise, high temperature, red, Teflon 100
SERIES MHV (H4) HIGH VOLTAGE CONNECTORS
SERIES MHV (H4) HIGH VOLTAGE CONNECTORS DESCRIPTION CONTENTS PAGE HUBER+SUHNER MHV connectors are coaxial miniature high voltage (MHV = Miniature High Voltage) connectors with 5 kv rms test voltage (mated
PPT 802, Proximity Probe Transducer System
PPT 802, Proximity Probe Transducer System PPH 080 : Proximity Probe Head PEC 036 : Probe Extension Cable PRD 020 : Proximity Probe Driver Feature Non-contacting measurement system based on eddy current
97 series crimp type plugs with solid shells
97 series crimp type plugs with solid shells 97-4106A L Max. N Ref. Q Max. V Fitting Threads Inch mm Inch mm Inch mm 10SL 1-3/8 34.93 3/4 19.057/8 22.23 5/8-24 12S 1-7/16 36.50 25/32 19.84 1 25.40 5/8-24
CABLES FOR AUTOMOTIVE MARKET Sensor and multimedia cables. Catalogue
CABLES FOR AUTOMOTIVE MARKET Sensor and multimedia cables Catalogue Introduction Nexans has developed a range of special and customised cables for the automotive market. This cable range covers two main
SCE. Snatch Connector Electrical Series
SCE Snatch Connector Electrical Series SCE is a miniature product with a silent push to mate and pull to release design across two styles of cable receptacles. All inserts and contacts are moulded in place,
MGO Thermocouples. Controls. Connection Head. Connection Head. Thermowells. Junction Fittings. Connectors Connection Heads.
Connection Head Type J, K, T and E Grounded Ungrounded Exposed Sheath Materials 304 Stainless Steel 316 Stainless Steel Inconel 600 Standard Aluminum Aluminum Flip Top Cast Iron/Aluminum 316 Stainless
Waterproof Series Waterproof
Waterproof Series Waterproof Technical Data Panel connector Panel connector, cable connector and coupler connector circular housing Locking screw connection Protection IP 65 with flat-gasket for panel
Amphenol. Amphenol GT Series Reverse Bayonet Coupling Connectors. Ruggedized Connector Series for Rail/Mass Transit and other Harsh Environments
Amphenol GT eries Reverse Bayonet Coupling Connectors 12-024-7 Ruggedized Connector eries for Rail/ass Transit and other Harsh Environments Amphenol Table of Contents age o. Amphenol GT eries Reversed
Data sheet E-DAT Industry patch cord V6 IP67 - RJ m
Illustrations Dimensional drawing Page 1/6 See enlarged drawings at the end of document Product specification fully shielded Cat.6 patch cable AWG 26/7 S/FTP with PUR cable sheath 1 x RJ45 and 1 x RJ45-IP67-V6
Amphenol s 2M Micro38999 Connector Series The New Aerospace Standard
Tri-Start Threaded Coupling General Information Page Guide Order... C29 Weight... C30 Plugs... C31 In-Line... C32 Square Flange... C33 Jam Nut... C34 PCB Sq Flange... C35 PCBJam Nut... C36 PCB Double Flange.
onlinecomponents.com
Description Amphenol connectors are used in applications where maximum RF shielding and minimum noise radiation are required. Features/Benefits Available in 7/8-20 and 11/16-24 threading, C, BNC and TNC
Triax Amphenol. Description Amphenol Triax connectors are used in applications where maximum RF shielding and minimum noise radiation are required.
Description Amphenol connectors are used in applications where maximum RF shielding and minimum noise radiation are required. Features/Benefits Available in 7/8-20 and 11/16-24 threading, C, BNC and TNC
FISCHER FREEDOM TM SERIES
K CHAPTER FISCHER TM SERIES EASY MATING EASY CLEANING EASY INTEGRATION KEY FEATURES No key code: 360 mating freedom & optimized cable management Membrane-sealed contacts (patent pending) Low profile IP68
Amphenol. eries SJT. Series SJT. VG 96912, Series 1 PAN JN 1003
Amphenol eries SJT Series SJT VG 96912, Series 1 PAN 6433-2 JN 1003 Ordering information Ordering example: SJT G 06 RT 14-35 P A 014 Series (p. 9, 15, 18) SJT Scoop proof (100% scoop-proof) Junior (Miniature
ANR SPECIFICATIONS. MATERIALS RoHS COMPLIANT - E222871
Wide variety of applications from consumer electronics to commercial Standard epoxy sealed terminations Gold contacts available for low power applications Available support brackets for greater stability
MIL-DTL Series 1 Solder Type PT
MIL-DTL-26482 Series 1 Solder Type PT The Amphenol Miniature Cylindrical Connector Series offers high density contact arrangements in a miniature, circular metal shell. This connector is environmentally
SITRANS P measuring instruments for pressure
Overview Siemens AG 009 Supplementary electronics for 4-wire connection Design Dimensions (W x H x D) in mm (inch) Electrical connection 80 x 10 x 60 (3.15 x 4.7 x.36) Screw terminals (Pg 13.5 cable inlet)
Probe Type Accuracy Handle Shaft Cable Plug Model Surface Probes Max. temp. at tip 7 sec. 220 C 428 F Response time
Probe Type Accuracy Handle Shaft Cable Plug Technical data probes type K : K type thermocouple : Class I Premium grade : ABS, 110 mm long, 90 C max. : Stainless steel : 1000 mm standard. Coiled polyurethan
A01 SERIES PUSHBUTTON SWITCHES, ILLUMINATED OR NON-ILLUMINATED Panel cut-out.630" (16mm)
PUSHBUTTON SWITCHES, ILLUMINATED OR NON-ILLUMINATED A pushbutton assembly requires: Screen + Lamp (if illuminated) + Operator + Switchblock To order, select desired model numbers from tables below. Example:
THERMOCOUPLE AND RESISTANCE THERMOMETER CABLES
THERMOCOUPLE AND RESISTANCE THERMOMETER CABLES ABOUT LABFACILITY Formed in 1971, Labfacility specialises in the field of Temperature and Process Measurement. We are the largest UK manufacturer of both
Amphenol 348 Series High Density Connectors
348 Series High Density Connectors 12-093-6 348 Series I, II Table of Contents 348 Series Page No. High Density Connectors........................................................................ 1 Specifications.................................................................................
K CHAPTER FREEDOM TM SERIES EASY MATING EASY CLEANING EASY INTEGRATION FISCHER KEY FEATURES
K CHAPTER FISCHER TM SERIES EASY MATING EASY CLEANING EASY INTEGRATION KEY FEATURES No key code: 360 mating freedom & optimized cable management Membrane-sealed contacts (patent pending) Low profile IP68
C&K E Series Sealed Miniature Toggle Switches
Sealed Miniature Switches eatures/benefits Sealed against solder and cleaning process contaminants UL 94V-0 Nylon case and bushing Multi-positions ESD protection available Typical Applications Telecommunications
Switches. SERIES FEATURE ACTUATION MAX RATING SEAL RATING MOUNTING CIRCUITRY 115VAC, 28VDC)
SWITCH SELECTION GUIDE Toggle Switches SERIES FEATURE ACTUATION MAX RATING SEAL RATING MOUNTING CIRCUITRY (Resistive @ 115VAC, 28VDC) T1 2 or 3 Position, Momentary, 8A MIL-PRF-83731 15/32" or 1/4" dia.
T Series Subminiature Toggle Switches
eatures/benefits Compact size small footprint Single and double pole models PC and panel mount options available RoHS compliant models available Typical Applications Hand-held telecommunications Instrumentation
DETAIL SPECIFICATION SHEET
INCH-POUND MIL-DTL-24308/36 1 April 2015 DETAIL SPECIFICATION SHEET CONNECTORS, ELECTRIC, RECTANGULAR, MINIATURE, COMBINATION INSERT ARRANGEMENT, RECEPTACLE, SOCKET CONTACTS, SHELL SIZE 4, SIZE 20 SIGNAL
- - Introduction. Specifications
14 SERIES Introduction Amphenol 14 series connectors are water resistant, polarised, five and six contact electrical connectors for use in low voltage audio frequency circuits and applications. They employ
For the plastics machinery industry Adjustable bayonet thermocouple Model TC47-AB
Electrical temperature measurement For the plastics machinery industry Adjustable bayonet Model TC47-AB WIKA data sheet TE 67.20 Applications Plastics and rubber industry For direct installation into the
Proximity Sensor. Shield Size Sensing distance Output configuration Models Shielded M12 3 mm NO E2EQ-X3D1 E2EQ-X7D1 M30 10 mm E2EQ-X10D1
Proximity Sensor A Series of Spatter-preventing Proximity Sensors with a Teflon-coated Metal Housing Teflon*-coated metal housing endures high tightening torque. Pre-wired and plug-in models are available.
Amphenol 62GB solder connectors
This catalogue to be used in conjunction with Catalogues: CE-2Pa 62GB Series Receptacles CE-2Aa 62GB Series Accessories Amphenol 62GB solder connectors This miniature bayonet lock connector series offers
CIT SWITCHTM ANT SPECIFICATIONS
Wide variety of applications from consumer electronics to commercial Standard epoxy sealed terminations Gold contacts available for low power applications Available support brackets for greater stability
M8 Series. Key features: BUCCANEER
Bulgin s M8 circular connectors and overmolded cables are designed to fulfil the ever growing demand for sensor, actuator and data connections in process control, industrial machinery and factory automation
E Series Sealed Miniature Toggle Switches
Sealed Miniature Switches eatures/benefits Sealed against solder and cleaning process contaminants UL 94V-0 Nylon case and bushing Multi-positions ESD protection available RoHS compliant models available
Amphenol-Tuchel Electronics 44 Series
44 Series Amphenol-Tuchel Electronics 44 Series Cost-effective environmental sealing Amphenol Tuchel 44 series connectors offer cost-effective performance for applications requiring environmental sealing.
SERIES 100 SWITCHES TOGGLE SWITCHES - MINIATURE. Phone: Fax: SPECIFICATIONS MATERIALS
TACT SERIES 100 - MINIATURE SPECIFICATIONS Contact Rating: Life Expectancy: Contact Resistance: Insulation Resistance: Dielectric Strength: See contact material options 40,000 make-and-break cycles at
THREADED & BAYONET CONNECTORS FOR DEMANDING ENVIRONMENTS
MILITARY AND COMMERCIAL AVIATION MIL - DTL - 83723 SERIES III THREADED & BAYONET CONNECTORS FOR DEMANDING ENVIRONMENTS CONNECTORS FOR DEMANDING ENVIRONMENTS THREADED AND BAYONET MILITARY AND COMMERCIAL
JUMO MIDAS Pressure transmitter
Phone: +44 19 635533 Fax: +44 19 6356 Data Sheet 401001 Page 1/5 JUMO MIDAS Pressure transmitter Brief description Pressure transmitters are used for measuring the relative (gauge) pressure in liquids
Data sheet. Connection cable M12 jack straight - free line end 8-pole, X-coded 0.5 m. Illustrations P/N 142M2X20005 EAN
Page 1/6 Illustrations Dimensional drawing Cut-out See enlarged drawings at the end of document Product specification shielded M12 Ethernet connection cable Cat.6A, x-coded, 8-pole side 1: M12-jack, straight
D-subminiature Backshells - Two-Piece D*H Series
Backshells - Two-Piece D*H Series Standard two-piece construction available in plastic, metallized plastic, or diecast zinc versions with 180 straight cable entry. Fits standard metal shell D-subminiature
MgO ORDER CODES. 1-1 Thermocouple Types CODE
MgO Insulated Thermocouples with Extension Leadwire MgO Insulated Thermocouples with Sheath Terminations A Pyromation MgO thermocouple assembly consists of a thermocouple element swaged in hardpacked standard
Amphenol SCE2/Terrapin Series
APPLICATIONS TECHNICAL SPECIFICATIONS Amphenol SCE2/Terrapin Series Radios Headsets MATERIALS AND FINISHES Shell Material Shell Plating Contact Material Contact Plating MINIATURE PUSH-PULL CONNECTOR FOR
2M805 Tri-Start Threaded Coupling
2M805 Tri-Start Threaded Coupling General Information 2M Specs 2M801 2M803 2M804 2M805 Series Micro Miniature Connectors: s 2M805 Series of connectors offers the best EMI and Vibration performance among
Amphenol 97 Series MIL-DTL-5015
Amphenol 97 Series MIL-DTL-5015 MATES WITH ALL THREADED MIL-DTL-5015 CONNECTORS The 97 series is a durable, cost-effective MIL-DTL-5015 available in a variety of shell styles, sizes, contacts, and layouts.
Data sheet Connection line M12 plug straight - RJ45 plug straight 8-pole, X-coded 5.0 m
Page 1/5 Illustrations Dimensional drawing See enlarged drawings at the end of document Product specification shielded M12-plug to RJ45-plug connection line Cat.6, 8-pole M12-connector, X-coded, straight
HT STRAIGHT ADAPTER, WRENCH FLATS ( )
HT7006 - STRAIGHT ADAPTER, WRENCH FLATS (12387118) MIL-DTL-38999 SERIES III; MIL-DTL-38999 SERIES IV HT7 0 06-11 - 6-8 SERIES ADAPTER ANGLE STRAIGHT - 0 CONNECTOR SERIES (INTERFACE) FINISH 8 - ELECTROLESS
INDUSTRIAL CONTROLS. Description. Products & features. Specifications. Illuminated or non-illuminated pushbutton switches.
INDUSTRIAL CONTROLS E A01 SERIES Panel cut-out.630" (16mm) Description Products & features Specifications Illuminated or non-illuminated pushbutton switches Indicators Rotary lever switches eylock switches
3RG4 BERO Inductive Proximity Switches
3RG40 11 3RG40 11 0AA00 10/14 3RG40 11 0AB00 10/14 3RG40 11 0AF00 10/13 3RG40 11 0AF05 10/18 3RG40 11 0AF33 10/17 3RG40 11 0AG00 10/13 3RG40 11 0AG05 10/18 3RG40 11 0AG33 10/17 3RG40 11 0CC00 10/14 3RG40
Luminus Series Amphenol Pcd
Luminus Series Amphenol Pcd Amphenol Pcd Pcd is is one one of of the the world s leading suppliers of of interconnect products for for Military, Commercial Aerospace and and Industrial applications. Located
For the plastics machinery industry Fixed bayonet thermocouple Model TC47-FB
Electrical temperature measurement For the plastics machinery industry Fixed bayonet Model TC47-FB WIKA data sheet TE 67.24 Applications Plastics and rubber industry For direct installation into the process
PRODUCT DATA. Pt100 Probe, PTFE Lead. Pt100 sensing resistor in stainless steel sheath, PTFE insulated extension lead.
PRODUCT DATA Pt100 Probe, PTFE Lead Pt100 sensing resistor in stainless steel sheath, PTFE insulated extension lead Sensor type Tip temperature rating Extension cable Pt100 Class B, 4 wire to IEC 60751
Type SJK Test Switches
Type SJK Test Switches No-barrier design Self-extinguishing materials Front-connected, back-connected and flush-mounted styles Blades operate independently or can be ganged together DESCRIPTION STATES
Series 1. Series 1 Pressure Switch. Pressure Switches Inc. Quality Pressure Solutions. Pressure Switches 1 G 10 N Key Features.
Model 1A 1C 1G 1Z 1P 1H Inc. Series 1 Series 1 Pressure Switch High, Low, Differential & Vacuum Pressure Switch options available All Anodized Aluminum Construction Multiple s Available UL & cul Approved
1000 Series Miniature Slide Switches
Miniature Switches Features/Benefits Variety of actuators and terminations Panel mount tabs available Epoxy terminal seal compatible with bottom-wash cleaning RoHS compliant Typical Applications Test &
Type 2REX-A. Oil & Gas / Heavy Industry
Oil & Gas / Heavy Industry Type 2REX-A EN 60079 Electrical Specifications Code: Incremental Resolution: 1 to 10,000 ppr (pulses per revolution) Supply Voltage: ** 4.5 Vdc min. to 30 Vdc max. (45 ma max.
2M804 Push-Pull Receptacles Protection Caps Ordering Guide for 2M
Push-Pull Receptacles Protection aps Ordering Guide for 2M667-202 Push-Pull Protective aps are available in plug and receptacle versions. Protective caps keep the connector interface dry and clean while
Amphenol. Bombardier Transportation Design Guide for Amphenol GT Series Reverse Bayonet Coupling Connectors
Bombardier Transportation Design Guide for Amphenol GT Series Reverse Bayonet Coupling Connectors -2123 Date: 10-01-2004 FOR USE BY BOMBARDIER & BOMBARDIER S SUBCONTRACTORS Amphenol Table of Contents Page
SPDT DPDT 3PDT 4PDT SWITCHES TACT POS 1 POS 2 POS 3. Model No.
SCHEMATIC 3 2 1 Model No. SP-1 ON NONE ON SP-2 ON NONE (ON) SP-3 ON OFF ON SP-4 (ON) OFF (ON) SP-5 ON OFF (ON) Term. Comm. 2-3 OPEN 2-1 ( ) = Momentary 6 5 4 3 2 1 Model No. DP-1 ON NONE ON DP-2 ON NONE
Data sheet Connection line M12-RJ45 4-pole D-coded AWG m
Page 1/6 Illustrations Dimensional drawing Wiring See enlarged drawings at the end of document Product specification shielded M12 to RJ45 Ethernet connection line Cat.5, 4-pole, D-coded (IEC 61076-2-101)
8710 EN. Potentiometric Displacement Sensors. Models 8710, 8711
Potentiometric Displacement Sensors Models 8710, 8711 Code: Delivery: Warranty: 8710 EN ex stock 24 months Model 8711 Model 8710 Application Displacement sensors models 8710 and 8711 with resistance tracks
A02 SERIES PUSHBUTTON SWITCHES, ILLUMINATED OR NON-ILLUMINATED Panel cut-out.866" (22mm) or 1.161" x.846" (29.5mm x 21.5mm)
PUSHBUTTON SWITCHES, ILLUMINATED OR NON-ILLUMINATED Panel cut-out.866" (22mm) or 1.161" x.846" (29.5mm x 21.5mm) E A pushbutton assembly requires: Screen + Lamp (if illuminated) + Operator + one or two
C&K 1000 Series Miniature Slide Switches
Miniature Switches Features/Benefits Variety of actuators and terminations Panel mount tabs available Epoxy terminal seal compatible with bottom-wash cleaning RoHS compliant Typical Applications Test &
C&K ET Series Sealed Subminiature Rocker Switches
Sealed Subminiature Switches eatures/benefits Sealed against solder and cleaning process contaminants, bushing & case UL 94V-0 Small footprint saves space Typical Applications Telecommunications Instrumentation
Microbore Hose, Assemblies & accessories
bar DN2 and DN4 High pressure Microbore hose Technical data Microbore hose The microbore hose assembly, most commonly used to connect to a Minimess test point for pressure testing, has many other diverse
NTC Thermistor Assemblies
FEATURES Standard and custom assemblies are available in a variety of configurations Assemblies can conveniently attach to or be an integral part of any system to monitor or control temperature No added
Bearing temperature sensor Type MBT 5310
MAKING MODERN LIVING POSSIBLE Data sheet Bearing temperature sensor Type MBT 5310 The MBT 5310 temperature sensor series is specially designed for measuring the temperature in bearings where there is a
TABLE OF CONTENTS. Amphenol Aerospace is a Certified ISO 9001 Manufacturer.
This catalog covers the Amphenol /Matrix MIL-C- 83723, Series III Connectors. These connectors incorporate crimp rear release contacts. There is great diversity within this cylindrical family, with the
For the plastics machinery industry Manifold thermocouple Model TC47-MT
Electrical temperature measurement For the plastics machinery industry Manifold Model TC47-MT WIKA data sheet TE 67.21 Applications Plastics and rubber industry Hot runner manifolds for injection mould
KNOCK CYLINDERS CONTENTS ACTUATORS GENERAL CATALOG. Caution KNOCK CYLINDERS
CAD drawing data catalog is available. ACTUATORS GENERAL CATALOG CONTENTS Features/Introductions of Variations 79 Double Acting Type Specifications 81 Order s 82 Inner Construction and Major Parts 83 Dimensions
ATEX/IECEx RTD temperature probe
Page 1/8 ATEX/IECEx RTD temperature probe with connecting cable acc. to DIN EN 60751 For temperatures from -100 to +600 C As single, double, or triple RTD temperature probe In two-wire, three-wire, or
General Information... Temperature/Resistance Table... Part Numbering Examples for RTD s. High Temperature MgO Elements (RA)...
Page General Information... Temperature/Resistance Table... Part Numbering Examples for RTD s High Temperature MgO Elements (RA).... Leadwire Style RTD s (RB).. Leadwire Style RTD s (RD, RE, RF, or RG
Power rocker switches with protection guard
Distinctive features and specifications Protected against accidental actuation SWKH709 Wide choice of colors Laser etched or pad printed symbols Illuminated or nonilluminated Sealed to IP9K ELECTRICAL
22AF 40AF AF 150AF 225AF 400AF 800AF
Contactors MC-Series UL508 E108780 Contactor 3 Pole Standards and Certifications UL508 IEC 60947-2 & IEC 60947-4-2 CSA C22.2 No.14 Features 8 Frame Sizes 1/2HP up to 600HP @ 480V AC Screw Terminals (Lug
Material: Weight: Shaft Loads: Enclosure Rating: Cable: Cable Glands:
Oil & Gas / Heavy Industry Type 2REX-A EN 60079 Electrical Specifications Code: Incremental Resolution: 1 to 10,000 ppr (pulses per revolution) Supply Voltage: ** 4.5 Vdc min. to 30 Vdc max. (45 ma max.
LMJ RANGE CONTENTS. Description and characteristics Shell Styles Ordering Information - Connectors... 7
CONTENTS Description and characteristics..... 3-4 Shell Styles... 5-6 Ordering Information - Connectors.... 7 Ordering Information - Crimp Tooling.... 8 Ordering Information Square Gaskets..... 8 Ordering
Data sheet Connection line M12-RJ45 4-pole D-coded AWG m
Page 1/5 Illustrations Dimensional drawing See enlarged drawings at the end of document Product specification shielded M12 to RJ45 Ethernet connection line Cat.5, 4-pole, D-coded (IEC 61076-2-101) M12
AV-W. Wind Speed and Wind Speed & Direction Sensors
Page 1 of 5 AV-W Wind Speed and Wind Speed & Direction Sensors Features: Benefits: Supplied with mounting bracket Wind speed accuracy ±2% Anodized aluminum housing Ideal for naturally ventilated building
Amphenol. Amphenol /Matrix MIL-C-83723, Series III Connectors. Bayonet, Threaded or Quick-Disconnect Coupling Connectors for Demanding Environments
Amphenol /Matrix MIL-C-, Series III Connectors -0- Bayonet, Threaded or Quick-Disconnect Coupling Connectors for Demanding Environments Amphenol This catalog covers the Amphenol /Matrix MIL-C-, Series
Data sheet. E-DAT Industry RJ45 field plug PROFINET. Illustrations P/N PI EAN Product specification. Page 1/
Page 1/7 Illustrations Dimensional drawing Wiring See enlarged drawings at the end of document Product specification multi-port Cat.5 plug to be assembled in the field 100 MBit suitable according to IEEE
MG RANGE CONTENTS. General Specification Shell Styles... 4, 5, 6. Ordering Information Connectors... 7
CONTENTS General Specification........ 3 Shell Styles..... 4, 5, 6 Ordering Information Connectors... 7 Ordering Information Protective Caps... 8 Ordering Information Square Gaskets... 8 Insert Configurations.
Our Most Important Connection is with You. SECTION 17. Tooling & Accessories R280 / R282
SECTION 17 Tooling & Accessories R280 / R282 Contents Joule effect soldering devices... 17-4 Stripping tools...17-4 and 17-7 Point gauges... 17-4 Soldering... 17-5 Installation tools...17-5 to 17-6 Cassettes...
Amphenol Industrial Threaded AIT
mphenol Industrial Threaded IT IT Series is a low cost, MILDTL5015 threaded type connector for use in harsh environmental conditions. This popular, cylindrical connector is particularly well suited to
Distribution Blocks & Bus-bar Solutions
Distribution Blocks & Bus-bar Solutions Insulated Multi Laminate Flexible Copper Bus-bars Threaded Copper Bus-bars Solid Copper Bus-bars Bus-bar Insulators & Supports Insulated Flexible Copper Braided
HyperGrip - Push/Pull Plastic Circular Connectors
A B C D E F G H J K HG2 HG3 HG4 Ø1.014 [25.76] 1.220 [30.98] Ø0.866 [22.00] 0.272 [6.91] 1.637 [41.59] 3.265 [82.93] Ø0.502 [12.75] Ø0.656 [16.66] 2.700 [68.56] 3.724 [94.60] Ø1.172 [29.77] 1.137 [28.87]
FP series Fully illuminated pushbutton switches - bushing Ø 24 mm - momentary or latching
Fully illuminated pushbutton switches bushing Ø 24 mm momentary or latching Distinctive features and specifications Threaded bushing UG1410AR2 Full actuator or symbol illumination Large but lightweight
06xx024S - STRAIGHT SHRINK BOOT ADAPTER, NON-DETENT SELF LOCKING 06xx024Y - ONE PIECE SHRINK BOOT ADAPTER, NON-DETENT SELF LOCKING
06xx024S - STRAIGHT SHRINK BOOT ADAPTER, NON-DETENT SELF LOCKING 06xx024Y - ONE PIECE SHRINK BOOT ADAPTER, NON-DETENT SELF LOCKING LENGTH STYLE Y SPECIFICATION: WHEN THE DESIRED ADAPTER S C DIAMETER IS
E2EZ-X2D1-N E2EZ-X2D2-N
Chip-immune Inductive s Detects Objects without Being Influenced by Aluminum or Iron Chips Series now includes M s. s also available. CE Marking for DC -Wire and DC -Wire s. Be sure to read Safety Precautions
SUBMERSIBLE SECONDARY CONNECTORS SSBC350-4LI. Cond. Range H W L
SUBMERSIBLE SECONDARY CONNECTORS -1- Index TYPE SSBC350-L (Wide-Port Spacing) Rubber Insulated Secondary Connectors SURE-SEAL RUS Approved User friendly wide-port spacing (50% more room for cable training).
Features and Application
MIL-DTL-38999 Features and Application Series II Features and Application MIL-DTL-38999 Series II connectors feature a bayonet coupling mechanism with lower profile design and rear-removable crimp contact
VG95234 Qualified Bayonet-Lock Connectors
Qualified Bayonet-Lock Crimp-Contact MIL-DTL-5015 Type Electrical for Ruggedized Power and Signal Applications United States United Kingdom Germany France Nordic Italy Spain Japan High Voltage Electrical
Amphenol Industrial Reverse Bayonet AIB
AI Coercial and Military Applications Amphenol Industrial Reverse ayonet AI AI Series is basically a MILDTL5015 (MILC5015) connector, but with an improved coupling system. AI Series replaces the threaded
Two case lengths. Three electrical functions. Sealing options. Model X1146 with Ø 16 (.630) bushing ELECTRICAL SPECIFICATIONS.
Distinctive features and specifications Two case lengths Three electrical functions Sealing options Model X1146 with Ø 16 (.630) bushing Max. current/voltage rating with resistive load : - silver contact
fischer ultralight connectors AluLite series new Edition 1.0
fischer ultralight connectors AluLite series new Edition.0 fischer ultralight connectors New AluLite series When weight matters Are weight considerations significant in the design and development of your
Thermocouples W A T L O W
W A T L O W Over 90 years of manufacturing, research and design makes Watlow a world class supplier of temperature measurement products. We have designed and manufactured millions of thermocouples for
High barriers Recognized by UL and cul Self-extinguishing materials Nonferrous material Corrosion-resistant nickel finish Safety-grip handle A complete line of switches is available for meter, relay, instrument,
SMB Amphenol. 50 ohm Coaxial Connectors Specifications 36 Plugs 37 Jacks 38 Bulkhead Receptacles PCB Receptacles 41-43
Description The name derives from SubMiniature B (the second subminiature design). The was developed in the 1960 s. is a smaller version of the SMA with snap-on coupling. Amphenol s connectors conform
ENGLISH Datasheet Platinum Resistance Pt100 4 wire class B Resistance Thermometer with Compact KNS Head
ENGLISH Datasheet Platinum Resistance Pt100 4 wire class B Resistance Thermometer with Compact KNS Head Pt100 probe with compact KNS terminal head Class B, 4 wire connection Various probe available lengths
MCX Amphenol. Description MCX. 50 Ohm Coaxial Connectors Specifications 18 Straight & Right Angle Crimp 19 Straight Solder & PCB 20-21
Description connectors conform to the European CECC 22220 Spec and was introduced in the 1980 s. While the uses identical inner contact and insulator dimensions as the SMB, the outer diameter of the plug
E Series Sealed Miniature Rocker and Lever Handle Switches
Sealed Miniature and Lever Handle Switches Features/Benefits Sealed against solder and cleaning process contaminants ESD Resistance all actuator options, case & bushing UL 94V-0 RoHS compliant Typical