DRAG RACING PARTS AND ACCESSORIES. dew point, wind gust and direction with Control Console. Extensive database allows

Transcription

1 PerformAire Weather Station PerformAire is the only weather station with an optional oxygen sensor to monitor the percentage of oxygen in the atmosphere. Standard and optional models incorporate state-of-theart temperature, humidity and barometric pressure sensors and automatically display density, altitude and e.t. prediction. Take the unit right to the staging lanes, get a quick weather reading, and select the data prediction program to determine dial-in or throttle stop setting. Data base can store up to 400 runs for up to ten different cars. ALTPA2...PerformAire Weather Station ALTPA2-O2...PerformAire Weather Station With Built-In Oxygen Sensor PerformAire Eclipse Weather Station Sure to be a favorite with bracket racers. State-of-theart weather station features an internal fan aspirated sensor tunnel which allows air to flow directly across the sensors for quick, accurate weather readings, even in direct sunlight. Uses a Lithium Ion rechargeable battery (charger included). The unit can take several hundred readings without recharging. Packed with the same prediction capabilities as the original PerformAire, but also allows for one-run predictions with preset and user defined ratios, multiple weather variable predictions, plus predictions for wind effects. ALTPAE...PerformAire Eclipse Weather Station ALTPAE-O2...PerformAire Eclipse Weather Station With Oxygen Sensor PerformAire Weather Center The PerformAire Weather Center in a trailer mounted version. Base system uses a remote sensor housing that may be located outside of trailer or in open air. Monitor temperature, barometric pressure, humidity, vapor pressure, dew point, wind gust and direction with Control Console. Extensive database allows Shown with optional wind speed sensor. super accurate e.t. prediction, throttle stop settings, jet sizes, etc. Information may be forwarded to driver in staging lanes with included pager. A personal computer is not needed. System is also available with options for oxygen percentage and wind speed. Part No. Description ALTPWC-PGSYS... Weather Center With Pager System ALTPWC-PGSYS02... Weather Center With Pager System And Oxygen Sensor ALTPWC-WD... Optional Wind Speed Sensor Only Quick Tree Practice reaction times anytime, anywhere. Hand held, portable practice tree may be set up for full or pro style tree countdown and will keep a running average of reaction times. Part No. Description ALTQTREE... Quick Tree Practice Tree ALTQTREE-SW... Remote Switch And Cable Dual EGT Logger ALTDLOGW Allows close monitoring of exhaust gas temperatures on up to two different cylinders. Unit has the capability of recording up to 1,000 readings using an adjustable sample rate. Includes monitor and weld-in probe. Fred Bartoli Fred Bartoli, Jr DRAG RACING PARTS AND ACCESSORIES 81

2 Pro Series Drag Racing Wheels Used by many professionals, American Racing TrakStar Pro Series Drag Racing Wheels are manufactured with forged components and are available in a variety of sizes and back spaces. Note: All wheels are for drag racing only - Not For Street Use. TrakStar 1-Piece Spindle Mount Front Wheels Spindle Mount, one-piece T-6061 forged aluminum Wheels meet SFI 15.2 specifications. Part No. Size Mount AMR48053S 15" x 3-1/2" Strange AMR48072A 17" x 2.15" Anglia Qualifier 1-Piece Spindle Mount Front Wheels One-piece, T-6061 forged aluminum Spindle Mount Wheels meet SFI 15.2 specifications. Part No. Size Mount AMR48172A 17" x 2.15" Anglia Torq Thrust Pro 1-Piece Spindle Mount Front Wheels Classic design, one-piece Torq Thrust wheels are manufactured from T-6061 forged aluminum. Spindle Mount Wheels meet SFI 15.2 specifications. Part No. Size Mount AMR48553S 15" x 3-1/2" Strange TrakStar 1-Piece Bolt Mount Front Wheels One-piece TrakStar Wheels are forged from T-6061 aluminum. Traditional Bolt Mount. Part No. Size Bolt Circle Back Spacing AMR " x 3-1/2" 5 x 4.75" 1.75" AMR " x 3-1/2" 5 x 4.75" 2.25" AMR " x 3-1/2" 5 x 4.50" 1.75" AMR " x 3-1/2" 5 x 4.50" 2.25" TrakStar 3-Piece Front Wheels Three-piece aluminum Wheels have anodized, forged T-6061 centers. Traditional bolt mount. Back Part No. Size Bolt Circle Spacing AMR " x 4" 5 x 4.75" 1.75" TrakStar 3-Piece Rear Wheels Durable, three-piece aluminum rear drag Wheels have anodized, forged T-6061 centers. All 15" x 14" and larger wheels exceed SFI 15.1 specifications. Offered in standard and double beadlock versions. Part No. Size Bolt Circle Back Spacing AMR " x 8" 5 x 4.75" 4" AMR " x 8" 5 x 4.50" 4" AMR " x 10" 5 x 4.75" 5" AMR " x 10" 5 x 4.50" 5" AMR " x 12" 5 x 4.75" 4" AMR " x 12" 5 x 4.50" 4" AMR " x 14" 5 x 4.75" 4" AMR " x 14" 5 x 4.75" 5" AMR " x 14" 5 x 4.50" 4" AMR " x 14" 5 x 4.50" 5" AMR DBL* 15" x 14" 5 x 4.75" 3" AMR " x 15" 5 x 4.75" 4" AMR " x 15" 5 x 4.75" 5" AMR " x 15" 5 x 4.75" 6" AMR DBL 16" x 16" 5 x 5.50" 4.25" *Double beadlock wheel meets SFI 15.1 specs. Heavy duty, double beadlock wheel meets SFI 15.3 specs. Spark Plugs Autolite Spark Plugs use a copper center electrode sheathed in nickel chromium alloy to provide superior heat dissipation. A multi-rib insulator reduces the chances of flash-over, and a longer insulator, pioneered by Autolite, resists carbon fouling, allowing combustion deposits to burn away. We carry a complete selection of plugs for virtually any application. Please call for more details. Refer to spark plug reference chart on Mike Marckini Photo By Caswell Photography page DRAG RACING PARTS AND ACCESSORIES

3 Cure traction problems with an Auburn Gear positive traction differential. The High Performance Series delivers superb weight transfer, with more torque delivered to the high traction wheel, even when there is zero traction at the loose wheel. The Pro Series offers ultimate Hi-Bias differential to deliver more torque, traction and faster engagement, even under changing load conditions. High Performance Series Part No. Size Applications Ratios Side Gear Spline Model Years Chrysler AUB /4" And 8-3/8" All Chrysler Products With 8-1/4" And 8-3/8" Ring Gear 2.71-Up Ford AUB /2" All 7-1/2", 10-Bolt Rears All Ratios Up AUB " All 8.8", 10-Bolt Rears All Ratios Up AUB " All 8.8" Truck And Hi-Perf Passenger Axle All Ratios Up General Motors AUB " And 8.6" All 8.5" And 8.6", 10-Bolt Rears 2.73-Up AUB " And 8.6" All 8.5" And 8.6", 10-Bolt Rears 2.73-Up AUB /2" And 7-5/8" 10-Bolt F And G Cars, S-Truck, Monza, Vega, Nova, M-Van, All B Cars With 7-5/8" Axle 3.23-Up Up AUB /2" And 7-5/8" 10-Bolt F And G Cars, S-Truck, Monza, Vega, Nova, M-Van, All B Cars With 7-5/8" Axle 3.23-Up AUB /2" And 7-5/8" 10-Bolt F And G Cars, S-Truck, Monza, Vega, Nova, M-Van, All B Cars With 7-5/8" Axle 3.08-Down AUB " And 8.6" All 8.5" And 8.6" 10-Bolt Axles 2.73-Up Up AUB " All 10-Bolt C -Clip Axle 3.08-Up AUB " All Buick/Olds/Pontiac With 8.2" Ring Gear 3.36-Up Pro Series Part No. Size Applications Ratios Side Gear Spline Model Years Chrysler AUB /4" All Chrysler Products All Ratios Ford AUB542036* 9" All Cars And Trucks All Ratios AUB542043* 9" All Cars And Trucks All Ratios AUB542054* 8.8" All Ford Products With 8.8" Ring Gear All Ratios Up AUB542059* 8" All 8" Axle Applications All Ratios General Motors AUB /8" 12-Bolt, Series 4 Car 4.10-Up AUB /8" 12-Bolt, Series 3 Car AUB /2 And 7-5/8" All GM Products With 7-1/2" And 7-5/8" Ring Gear 3.23-Up AUB " And 8.6 All 8.5" And Bolt Axles 2.73-Up AUB "/8.6" All 8.5"/8.6" 10-Bolt Axles 2.73-Up AUB " 10-Bolt Buick, Olds, Pontiac 3.36-Up AUB " 10-Bolt Chevrolet 8.2" 3.08-Up AUB "/8.4" All 3-Series Cases 3.70-Down *All Ford 8", 8.8" and 9" pro series models must use Ford D B ring gear bolts or equivalent. Ected (Electronic Controlled Traction Enhancing Differential) Select limited slip or locker traction modes right from the driver s seat via a simple on/off switch. Ideal for street/strip applications. When switch is in the off position, the unit operates in conventional limited slip mode where heavy acceleration energizes the clutch pack, directing bias torque to the high traction wheel. When switched to the on position, an electromagnetic coil within the unit causes the differential to instantly become a true locker unit, with equal power to both rear wheels. Includes on/off switch, wiring harness, coil retainer, friction modifier additive, and installation instructions. Side Gear Spline Model Years Part No. Size Applications Ratios Ford AUB " All 8.8" Except IRS All Up General Motors AUB /8" 12-Bolt, Series 3 Car AUB /8" 12-Bolt, Series 4 Car 4.10-Up New! DRAG RACING PARTS AND ACCESSORIES 83

4 Aurora Bearing Company manufactures two- and three-piece spherical rod ends. Both use a solid, one-piece race. The two-piece version consists of a body and precision ground, oil impregnated, sintered steel ball which allows the rod end body to carry a greater static load. The ball is self lubricating under normal conditions. The three-piece rod end consists of a body, ball and race and features a fully swaged bearing for maximum spherical conformity between the ball and race. Rod End Specifications Description Body Race Ball CM, CB, CW And CG Series, 2-Pc. Low Carbon Steel, Protective Coated Sintered Steel, Heat Treated, General Purpose-Economy For Corrosion Resistance Oil Impregnated VCM, VCB, VCW And VCG Series, 2-Pc. Low Carbon Steel, Protective Coated Sintered Steel, Heat Treated, General Purpose-Economy* For Corrosion Resistance, PTFE Lined Oil Impregnated Low Carbon Steel, Protective Coated For MM, MB, MW And MG Series, 3-Pc. Low Carbon Steel, Protective Coated Alloy Steel, Heat Treated And Corrosion Resistance, No. 16 Series Standard General Purpose-Precision For Corrosion Resistance Hard Chrome Plated Body Is 4130 Steel, Non Heat Treated AM And AB Series, 3-Pc. High Strength Alloy-Precision 4130 Steel Alloy Heat Treated And Protective Coated For Corrosion Resistance Steel Alloy Heat Treated And Coated For Corrosion Resistance Alloy Steel, Heat Treated And Hard Chrome Plated XM And XB Series, 3-Pc. Low Carbon Steel, Protective Coated Steel Alloy Heat Treated And Coated Alloy Steel, Heat Treated And Extra Strength-Heavy Duty Shank XAM And XAB Series, 3-Pc. High Strength Alloy-Heavy Duty Shank *Popular use as tie rod ends. For Corrosion Resistance Steel Alloy Heat Treated And Protective Coated For Corrosion Resistance Steering Shaft Rod End AURCM-12OS Specially built Aurora 3/4" rod end has a slightly oversize 3/4" hole to fit 3/4" O.D. steering shaft tubing. Mono Ball Bearing AURCOM-12 Race is carbon steel with protective coating. Ball is hardened steel, heat treated and hard chrome plated. ID is.750"; OD is " Rod End Part Numbers For Corrosion Resistance Steel Alloy Heat Treated And Coated For Corrosion Resistance Hard Chrome Plated Alloy Steel, Heat Treated And Hard Chrome Plated Jam Nuts Thread Hole CM, CB, VCM, VCB, MM, MB, AM, AB Steel Aluminum Size Size CW, CG VCW, VCG MW, MG AW, AG XM, XB XAM, XAB ALB, ALM Size Part No. Part No RH Male 3/16" AURCM-3 1/4" RH ALL LH Male 3/16" AURCB-3 1/4" LH ALL RH Female 3/16" AURCW-3 5/16" RH ALL /4" RH Male 1/4" AURCM-4 AURMM-4Y AURAM-4 5/16" LH ALL /4" LH Male 1/4" AURCB-4 AURMB-4 AURAB-4 3/8" RH ALL /4" RH Female 1/4" AURCW-4 3/8" LH ALL /4" LH Female 1/4" AURCG-4 AURMG-4 7/16" RH ALL /16" RH Male 5/16" AURCM-5 AURVCM-5 AURMM-5Y AURAM-5 7/16" LH ALL /16" LH Male 5/16" AURCB-5 AURVCB-5 AURMB-5 AURAB-5 1/2" RH ALL18258 ALL /16" RH Female 5/16" AURCW-5 AURVCW-5 AURMW-5 AURAW-5 1/2" LH ALL18259 ALL /16" LH Female 5/16" AURVCG-5 5/8" RH ALL18260 ALL /8" RH Male 3/8" AURCM-6 AURVCM-6 AURMM-6Y AURAM-6 5/8" LH ALL18261 ALL /8" LH Male 3/8" AURCB-6 AURVCB-6 AURMB-6Y AURAB-6 3/4" RH ALL18262 ALL /8" RH Female 3/8" AURCW-6 AURVCW-6 AURAW-6 3/4" LH ALL18263 ALL /8" LH Female 3/8" AURCG-6 7/16" RH Male 7/16" AURCM-7 AURMM-7Y AURAM-7 Jam Nut Assortment 7/16" LH Male 7/16" AURCB-7 AURMB-7Y AURAB-7 ALL Asst. RH Jam Nuts 7/16" RH Female 7/16" AURCW-7 AURMW-7 AURAW-7 ALL Asst. LH Jam Nuts 7/16" LH Female 7/16" 1/2" RH Male 1/2" AURCM-8 AURVCM-8 AURMM-8Y AURAM-8 1/2" LH Male 1/2" AURCB-8 AURVCB-8 AURMB-8Y AURAB-8 1/2" RH Female 1/2" AURCW-8 AURVCW-8 AURMW-8 AURAW-8 1/2" LH Female 1/2" AURCG-8 AURVCG-8 5/8" RH Male 5/8" AURCM-10 AURVCM-10 AURMM-10Y AURAM-10 AURALM-10 5/8" RH Male 1/2" AURXM-8 AURXAM-8 5/8" LH Male 5/8" AURCB-10 AURVCB-10 AURMB-10Y AURAB-10 AURALB-10 High 5/8" LH Male 1/2" AURXB-8 AURXAB-8 5/8" RH Female 5/8" AURCW-10 AURVCW-10 AURAW-10 Misalignment 5/8" LH Female 5/8" AURCG-10 AURVCG-10 3/4" RH Male 3/4" AURCM-12 AURVCM-12 AURMM-12Y AURAM-12 AURALM-12 Rod End 3/4" RH Male 5/8" AURXM-10 AURXAM-10 AURHXAM-6T 3/4" LH Male 3/4" AURCB-12 AURVCB-12 AURMB-12Y AURAB-12 AURALB-12 3/4" LH Male 5/8" AURXB-10 AURXAB-10 3/8" x 7/16"-20 RH. 3/4" RH Female 3/4" AURCW-12 AURVCW-12 AURMW-12 AURAW-12 3/4" LH Female 3/4" AURCG-12 Note: Most rod ends are also available with PTFE (Teflon) liner by adding T to the end of the part number DRAG RACING PARTS AND ACCESSORIES

5 Ultimate II Dual Channel 5" Playback Tachometers The tachometer that records both engine and driveshaft RPM. Detect tire, clutch or torque converter slippage. Fully automated, eliminating driver interaction during recording. Peak and valley pause function at shift points displays RPM. A built-in Four- Stage Shift-Light and LED time clock are also featured. Store up to four runs at 42 seconds each. Available with black or silver dial face. ATM Dual Channel Playback 9,000 RPM Black Tachometer ATM Dual Channel Playback 11,000 RPM Black Tachometer ATM Dual Channel Playback 9,000 RPM Silver Tachometer Ultimate Single Channel 5" Playback Tachometers Tachs have extensive data gathering ability and more features than any other Single-Channel tachs. ARMS (Automatic Record Memory Start) begins recording with release of the line-lock or trans-brake. Record up to four runs at 42 seconds each. Other features include Four Stage Shift Light, LED time clock, along with Peak and Valley Shift Catcher. Available in black or Ultimate Silver design. ATM ,000 RPM Single-Range Tachometer ATM ,000 RPM Single-Range Ultimate Silver Tachometer ATM ,000 RPM Single-Range Ultimate Silver Tachometer Marty Brown/Quick Fuel Technology ATM6884 ATM6871 Pro-Comp 5" Playback Tachometers Pro-Comp Tachometers allow race teams to evaluate their combination through playback capability. Recording begins with ARMS function, which starts recording after the line-lock or transbrake is released. Store up to four runs at 42 seconds each. Runs may be re-played at full or half speed. An LED clock, Four-Stage Shift Light and Peak RPM Recall are additional features. Available in black or silver dial face. ATM ,000 RPM Single-Range Tachometer ATM ,000 RPM Silver Single-Range Tachometer Pro-Comp Tachometers Pro-Comp Tachometers have black dial faces, bright red pointers and advanced circuitry for reliable operation under the most extreme conditions. Available with Peak RPM/Memory and Shift-Lite in 3-3/4" and 5" models (in dash and pedestal mount). Pedestal Mount ATM ,000 RPM Tachometer, Shift-Lite/Memory, 3-3/4" Dia. ATM ,000 RPM Tachometer, Memory, 5" Dia. ATM ,000 RPM Tachometer, Memory, 5" Dia. ATM ,000 RPM Tach., Memory, Vertex OAC/MSD Pro Mag, 5" Dia. In-Dash Mount ATM ,000 RPM Tachometer, 5" Dia. ATM ,000 RPM Tachometer, Memory, 5" Dia. Sport-Comp 5" Playback Tachometers Data acquisition is now available in Auto Meter s affordable Sport-Comp line. Review the entire run immediately after a race. Record time of 1 minute, 20 seconds allows plenty of time to record burn-out, staging process and a full pass. Runs can be replayed at 1/3 speed, fast forwarded or rewound. Select up to four shift points. Available in pedestal mount with traditional black or Sport-Comp Silver 5" dia. dial faces. ATM ,000 Sport-Comp Silver Playback Tachometer ATM ,000 Sport-Comp Silver Playback Tachometer ATM ,000 Sport-Comp Playback Tachometer ATM ,000 Sport-Comp Playback Tachometer ATM6864 ATM6601 ATM DRAG RACING PARTS AND ACCESSORIES 85

6 Ultra-Lite Tachometers ATM6855 Available in 3-3/8" and 5" diameters with attractive silver dial faces to match other Ultra-Lite gauges. Units with shift light have two separate shift settings. Bright red Quick-Lite with Dial-In-Exactness for quick, accurate shifts, and Peak RPM Memory Recall (displays the highest RPM attained). Choose from Single-Range, or Dual Range (expanded critical RPM band) models. Pedestal Mount ATM ,000 RPM Dual-Range Memory Tachometer, Shift-Lite, 5" Dia. ATM ,000 RPM Dual-Range Memory Tachometer, Shift-Lite, 5" Dia. ATM ,000 RPM Single-Range Memory Tachometer, Shift-Lite, 5" Dia. ATM ,000 RPM Single-Range Memory Tachometer, Shift-Lite, 5" Dia. In-Dash Mount ATM ,000 RPM Single-Range Memory Tachometer, 5" Dia. ATM ,000 RPM Single-Range Tachometer, 3-3/8" Dia. ATM ,000 RPM Single-Range Tachometer, 5" Dia. ATM ,000 RPM Dual-Range Memory Tachometer, 5" Dia. Ultra-Lite II Tachometers The Ultra-Lite II incorporates advanced, through the dial lighting and includes all of the features of traditional Ultra-Lite series tachs, including lightweight, silver anodized aluminum dial faces and bright red pointers. Available in 5" dia. pedestal and 3-3/8" dia. and 3-3/4" dash-mount versions. ATM ,000 RPM 3-3/8" Tachometer, Dash Mount ATM ,000 RPM 3-3/4" Tachometer With Shift Light, Pedestal Mount ATM ,000 RPM 5" Tachometer, Pedestal Mount Carbon Fiber Tachometers Auto Meter has raised the standard with carbon fiber dials and silver bezels for a competition appearance. ATM4899 features Dial-In-Exactness Shift-Lite. ATM4894 also has Peak RPM/Memory (displays the highest RPM on the last run). 3-3/8" and 5" diameters. Pedestal Mount ATM ,000 RPM Shift-Lite Tachometer, 5" Dia. In-Dash Mount ATM ,000 RPM Tachometer, 3-3/8" Dia. ATM ,000 RPM Memory Tachometer, 5" Dia. ATM ,000 RPM Tachometer, 5" Dia. Silver Tachometers Silver tachometers combine the attractive appearance of the Ultra-Lite series with the affordability of the Sport- Comp line. Tachometers are available with Shift-Lite and Memory, which allows reviewing the highest RPM attained on the previous run. Offered in 3-3/4" and 5" diameter versions in dash or pedestal mount. Pedestal Mount ATM ,000 RPM Tachometer, 3-3/4" Dia. ATM ,000 RPM Tachometer, 5" Dia. ATM ,000 RPM Shift-Lite Tachometer, 5" Dia. In-Dash Mount ATM ,000 RPM Memory Tachometer, 3-3/4" Dia. ATM4997 ATM4899 ATM3911 Phantom Tachometers Phantom Series tachometers have bright white dial faces, bold black numbering and bright red pointers. Tachs are offered in 3-3/8", 3-3/4" and 5" diameter. Options include Shift-Lite and Peak RPM/Memory. Choose pedestal or in-dash versions. Pedestal Mount ATM ,000 RPM Tachometer, 3-3/4" Dia. ATM ,000 RPM Memory Tachometer, 5" Dia. ATM ,000 RPM Shift-Lite Tachometer, 5" Dia. In-Dash Mount ATM ,000 RPM Tachometer, 3-3/8" Dia. ATM ,000 RPM Tachometer, 5" Dia. Sport-Comp Tachometers Tachs have the traditional competition appearance with large black dial faces and bright red pointers. Some models are available with Shift-Lite feature to promote accurate shifting. Set shift points using Dial-In Exactness with a simple turn of a knob. Tach ATM3906 also includes Peak RPM/Memory (recalls highest RPM on the last run). Offered in 3-3/4" and 5" diameters. Pedestal Mount ATM ,000 RPM Tachometer, 3-3/4" Dia. ATM ,000 RPM Tachometer, 3-3/4" Dia. ATM ,000 RPM Monster Tachometer, 5" Dia. ATM ,000 RPM Tachometer, Shift-Lite (On Shield), 5" Dia. ATM ,000 RPM Tachometer, Shift-Lite (External), 5" Dia. ATM ,000 RPM Tachometer, Shift-Lite (External), 5" Dia. ATM ,000 RPM Tachometer, Shift-Lite (External), Memory, 5" Dia. ATM ,000 RPM Monster Tachometer, 5" Dia. In-Dash Mount ATM ,000 RPM Tachometer, 5" Dia. Sport-Comp II Tachometers New, Sport-Comp II features intense through the dial white LED lighting and a red, LED lit pointer for greater visibility, day or night. Offered in 5" dia. pedestal and 3-3/8" dia. dash-mount. Pedestal mount tach includes Shift Lite. ATM3697 ATM ,000 RPM 3-3/8" Tachometer, Dash Mount ATM ,000 RPM 5" Shift-Lite Tachometer, Pedestal Mount ATM ,000 RPM Mini Monster Shift-Lite Tachometer, Pedestal Mount Auto Gage 5" Tachometers Economically priced pedestal mount tachs are easy to read with large, 5" dia. dial faces and bright red pointers. Tachs are offered in 0-8,000 and 0-10,000 RPM versions with traditional black or silver (ATM only) dial faces. Tachometers with Shift-Lite and ATM DRAG RACING PARTS AND ACCESSORIES ATM3780 Memory features are also available. ATM ATM ,000 RPM Memory Tachometer ATM ,000 RPM Shift-Lite (On Shield) Tachometer ATM ,000 RPM Shift-Lite (External) Tachometer ATM ,000 RPM Shift-Lite (External) Tachometer ATM ,000 RPM Shift-Lite (External) Memory Tachometer ATM ,000 RPM Shift-Lite (External) Tachometer, Silver Dial Face

7 2-5/8" Dia. Gauges Sport-Comp Gauges Sport-Comp Gauges have been widely used in drag racing since their introduction twenty years ago. The black dial face and bright red pointer lend a competition appearance that has assured their popularity. Available in mechanical and electrical versions. Installation hardware and 12 volt lighting included. Ultra-Lite Gauges Ultra-Lite Gauges are the hottest gauges in drag racing. Aluminum construction reduces weight while the satin aluminum dial face and bright fluorescent red pointer enhance appearance. Available in mechanical and electrical versions. Installation hardware and 12 volt lighting included. Silver Liquid-Filled Gauges Silver Liquid-Filled Gauges blend the look of the Ultra-Lite with the ruggedness of Pro- Comp liquid-filled gauges to make these the toughest gauges in racing. Carbon Fiber Gauges The Ultra-Lite series has been expanded to include Carbon Fiber gauges with authentic carbon fiber dials and silver bezels and pointers. Installation hardware and 12 volt lighting included. Pro-Comp Gauges Auto Meter s top-of-the-line series, Pro- Comp gauges are liquid-filled, making them ideal for cars that are subject to excessive vibration. A black dial face and bright fluorescent red pointer allow quick, easy gauge reading. Rugged gauges are available in mechanical and electrical versions. Installation hardware and 12 volt lighting included. Phantom Gauges Phantom gauges have white dial faces, black bezels and bright red pointers for quick, easy reading. Installation hardware and 12 volt lighting included. Description Sport-Comp Ultra-Lite Silver LFG Carbon Fiber Pro-Comp Phantom Boost-Vac. 30 In./20 PSI/Mech. ATM3401 ATM4401 ATM4801 ATM5401 ATM5801 Blower Press., 0-60 PSI/Mech. ATM3402 ATM4402 ATM4602 ATM5402 ATM5802 Boost-Vac., 30-30/Mech. ATM3403 ATM4403 ATM4603 ATM4803 ATM5803 Boost-Pressure, 0-35 PSI/Mech. ATM3404 ATM4404 ATM5404 Fuel Press., 0-15 PSI/Mech. ATM3411 ATM4411 ATM4611 ATM4811 ATM5411 ATM5810 Fuel Press., PSI/Mech. ATM3412 ATM4412 ATM4612 ATM4812 ATM5412 ATM5812 Fuel Press., 0-15 PSI With Isolator ATM3413 ATM4413 ATM4813 ATM5413 ATM5813 Fuel Level, GM Prod., 65-Up ATM3514 ATM4414 ATM4814 ATM5415 ATM5814 Fuel Level, Ford/Chrys. Prod. ATM3515 ATM4415 ATM4815 ATM5416 ATM5815 Fuel Level, Ohms* ATM3516* ATM4416* ATM4816* ATM5417* ATM5816* Oil Press., PSI/Mech. ATM3421 ATM4421 ATM4621 ATM4821 ATM5421 ATM5821 Oil Press., PSI/Mech. ATM3422 ATM4422 ATM4622 ATM5422 Oil Press., PSI/Mech. ATM3423 ATM4423 ATM5823 Brake Press., 0-2,000 PSI/Mech. ATM4426 ATM4626 ATM5426 Oil Press., PSI/Elec. ATM3522 ATM4427 ATM4827 ATM5427 ATM5827 Nitrous Press., PSI/Mech. ATM3428 ATM4428 ATM4828 ATM5828 Water Temp., /6' Tubing ATM3431 ATM4431 ATM4631 ATM4831 ATM5431 ATM5831 Water Temp., /6' Tubing ATM3432 ATM4432 ATM4632 ATM4832 ATM5432 ATM5832 Water Temp., /12' Tubing ATM3433 ATM4433 ATM5433 Temp., /6' Tubing ATM3435 ATM4435 ATM5435 Water Temp., /Elec. ATM3531 ATM4437 ATM4837 ATM5437 ATM5837 Oil Temp., /6' Tubing ATM3441 ATM4441 ATM4641 ATM4841 ATM5441 ATM5841 Oil Temp., /12' Tubing ATM3443 ATM5443 Oil Temp., /Elec. ATM3543 ATM4447 ATM5447 ATM5847 Trans. Temp., /8 Tubing ATM3451 ATM4451 ATM4851 ATM5451 ATM5851 Trans. Temp., /Elec. ATM3552 ATM4457 ATM5457 ATM5857 Fuel Press., 0-15 PSI/Elec. ATM3561 ATM4461 ATM5461 Fuel Press., PSI/Elec. ATM3563 ATM4463 ATM4863 ATM5863 Low Water Temp., /Elec. ATM3569 ATM4469 ATM5469 Vacuum, 30 In. Hg. ATM3484 ATM4484 ATM4884 ATM5484 ATM5884 Ammeter, Amps ATM3586 Voltmeter, 8-18 Volts ATM3592 ATM4491 ATM4891 ATM5492 ATM5891 *Use ATM3262 sender DRAG RACING PARTS AND ACCESSORIES 87

8 2-1/16" Dia. Gauges Sport-Comp Gauges Sport-Comp styling is now available in the popular 2-1/16" size. Featuring the same easy-to-read black dial face and bright red pointer as the 2-5/8" versions, the 2-1/16" Sport-Comp can be easily read at a quick glance. Installation hardware and 12 volt lighting included. Sport-Comp II Gauges Gauges feature the look of the traditional Sport-Comp line with the addition of modern, through the dial LED lit dial and pointer. Sport-Comp II gauges include a black dial face with white increments, which become illuminated for easier reading at night. Installation hardware and 12 volt lighting included. Ultra-Lite Gauges Auto Meter combined their Ultra-Lite gauges with the popular 2-1/16" size to create the 2-1/16" Ultra-Lite line. The gauges feature satin aluminum dial faces with bright red pointers for excellent visibility. Installation hardware and 12 volt lighting included. Carbon Fiber Gauges 2-1/16" diameter gauges have real carbon fiber dials and silver bezels and pointers. Installation hardware and 12 volt lighting included. Ultra-Lite II Gauges Easy-to-read gauges feature intense, through the dial LED lighting and a red, LED lit pointer. Unique, reverse lighting effect displays a silver dial with black increments during daylight, while a dark dial and illuminated increments are viewed at night. Installation hardware and 12 volt lighting included. Phantom Gauges Compact, easy to mount 2-1/16" Phantom gauges have bright white dial faces, black bezels and bright red pointers for easy reading. Installation hardware and 12 volt lighting included. Description Sport-Comp Sport-Comp II Ultra-Lite Carbon Fiber Ultra-Lite II Phantom Boost-Vac. 30 In./20 PSI/Mech. ATM3301 ATM4301 ATM4701 ATM5701 Boost-Vac. 30 In./30 PSI/Mech. ATM3303 ATM3603 ATM4303 ATM4703 ATM4903 ATM5703 Boost-Pressure, 0-35 PSI ATM3304 ATM3604 ATM4304 ATM4704 ATM4904 ATM5704 Boost-Pressure, 0-60 PSI ATM3605 ATM4305 ATM4905 Fuel Pressure, 0-15 PSI/Mech. ATM3311 ATM4311 ATM4711 Fuel Pressure, PSI/Mech. ATM3312 ATM4312 ATM4712 ATM5712 Fuel Pressure, 0-15 PSI With Isolator ATM3313 ATM4313 Fuel Level, 65-Up GM Prod. ATM3314 ATM4314 ATM4714 ATM5714 Fuel Level, Ford/Chrysler Prod. ATM3315 ATM3615 ATM4315 ATM4715 ATM4915 ATM5715 Fuel Level, 240/33 Ohms* ATM3316 ATM3616 ATM4316 ATM4716 ATM4916 ATM5716 Fuel Level, 158/16 Ohms ATM3318 ATM4318 ATM5718 Oil Pressure, PSI/Mech. ATM3321 ATM3621 ATM4321 ATM4721 ATM4921 ATM5721 Oil Pressure, PSI/Mech. ATM3322 ATM4322 Oil Pressure, PSI/Mech. ATM3323 ATM4323 ATM5723 Oil Pressure, PSI/Elec. ATM3327 ATM3627 ATM4327 ATM4727 ATM4927 ATM5727 Nitrous Pressure, 0-1,600 PSI/Mech. ATM3328 ATM4328 ATM4728 ATM5728 Water Temp, F/6' Tubing ATM3331 ATM3631 ATM4331 ATM4731 ATM4931 ATM5731 Water Temp, F/12' Tubing ATM3332 ATM3632 ATM4332 ATM4732 ATM4932 ATM5732 Water Temp, F/6' Tubing ATM3333 ATM4333 Water Temp, F/Elec. ATM3337 ATM3637 ATM4337 ATM4737 ATM4937 ATM5737 Oil Temp F/6' Tubing ATM3341 ATM4341 ATM4741 ATM5741 Exhaust Gas Temp., 0-1,600 F** ATM3343 ATM4343 ATM4743 ATM5743 Exhaust Gas Temp., 0-1,600 F ATM3344 ATM3644 ATM4344 ATM4744 ATM4944 ATM5744 Oil Temp, F/Mech. ATM4346 Oil Temp, F/Elec. ATM3347 ATM4347 ATM5747 Oil Temperature, F/Elec. ATM3348 ATM3648 ATM4348 ATM4748 ATM4948 Trans. Temp, F/Mech. ATM3351 ATM4351 Trans. Temp, F/Elec. ATM3357 ATM3657 ATM4357 ATM4757 ATM4957 ATM5757 Fuel Pressure, 0-15 PSI/Elec. ATM3361 ATM4361 ATM5761 Fuel Pressure, PSI/Elec. ATM3363 ATM3663 ATM4363 ATM4763 ATM4963 ATM5763 Nitrous Pressure, 0-1,600 PSI ATM3374 ATM3674 ATM4374 ATM4774 ATM4974 ATM5774 Air/Fuel Ratio, Lean-Rich ATM3375 ATM3675 ATM4375 ATM4775 ATM4975 ATM5775 Air/Fuel Ratio, Digital Wide Band ATM3378 ATM4378 ATM5778 Vacuum 30 In. Hg./Mech. ATM3384 ATM4384 ATM4784 ATM5784 Voltmeter, 8-18 Volts ATM3391 ATM4391 ATM4791 ATM5791 *Use ATM3262 sender. **Without probe. With probe DRAG RACING PARTS AND ACCESSORIES

9 Temperature Adapter Fittings Hard-to-find fittings for use with Auto Meter mechanical oil, water and transmission temperature gauges. Extension Adapters are also available where extra water passage clearance is needed. ATM Weld-in Adapter, All Mech. Trans. And Temp. Gauges ATM /8" Brass NPT Adapter ATM /2" Brass NPT Adapter ATM /8"NPT to M10x1 (metric) Adapter ATM /2"NPT Temperature Extension ATM /8"NPT Temperature Extension ATM /8"NPT Red Aluminum Adapter ATM /2"NPT Red Aluminum Adapter ATM Temperature Manifold, Fits 3/8" O.D. Tubing ATM Temperature Manifold, Fits 5/16" O.D. Tubing Braided Stainless Steel And Copper Gauge Tubing Tubing for all gauge series. ATM ' Copper, 1/8" Dia., Mech. Pres. Ga. ATM ' Braided Stainless -4AN, 3/16 I.D. Mech. Pres. Ga. ATM ' Braided Stainless -4AN, 3/16 I.D. Mech. Pres. Ga. ATM ' Braided Stainless -4AN, 3/16 I.D. Mech. Pres. Ga. Replacement Bulbs And Sockets ATM For All Steel Case 2-5/8" Gauges And Tachs ATM Twist-In For Some Pro-Comp And SportComp Gauges Pyrometer Probes And Fittings Type K thermocouple probe and fitting kits are required for use with Auto Meter pyrometers. ATM Competition 3/16" Stainless Probe And (Weld-On) Fitting Kit ATM Competition 3/16" Replacement Probe Only ATM Performance 3/16" Stainless Probe (Clamp-On) Kit ATM Street Series 1/4" Probe Kit ATM Replacement 1/4"-1/8" Probe Fitting Only ATM Replacement 3/16"-1/8" Probe Fitting Only Mounting Cups For All 2-1/16" Gauges ATM Chrome ATM Black Sport-Comp And Ultra-Lite 2-5/8" ATM Carbon Fiber, Use With Elec. Gauges ATM Carbon Fiber, Use With Mech. Gauges ATM Chrome, Use With Elec. Gauges ATM Black, Use With Elec. Gauges ATM Chrome, Use With Temp./Press. Gauges ATM Black, Use With Temp./Press. Gauges Pro-Comp 2-5/8" (Use With Liquid-Filled Gauges Except Brake PSI) ATM Chrome, Use With Press. Or Temp. Gauges ATM Black, Use With Press. Or Temp. Gauges Pro-Comp Monster 3-3/8" (Use With In-Dash Tach/Elec. Speedometer) ATM Chrome, Monster Mounting Cup ATM Black, Monster Mounting Cup DRAG RACING PARTS AND ACCESSORIES ATM2263 ATM2270 Black Aluminum Gauge Panels For 2-1/16" Gauges For 2-5/8" Gauges Description 1-Hole ATM2236 ATM Hole ATM2237 ATM Hole ATM2238 ATM3233 Mounting Solutions Roll Pods Mount tachometers or gauges directly to roll cage tubing with Roll Pods. ATM /8" Roll Pod, Mounts 2-5/8" Dia. Gauge To 1-1/2" Dia. Tubing ATM /16" Roll Pod, Mounts 2-1/16" Dia. Gauge To 1-5/8" Dia. Tubing ATM /8" Roll Pod, Mounts 2-5/8" Dia. Gauge To 1-5/8" Dia. Tubing ATM Tachometer Roll Pod, Mounts Tach To 1-5/8" Dia. Tubing ATM Tachometer Roll Pod, Mounts Tach To 1-3/4" Dia. Tubing Gauge Works Gauge Works pods allow mounting single or multiple gauges where they may be easily viewed. Pods are for windshield pillar, steering column, dashboard, console and factory instrument panel. Gauges sold separately. Dash Pod (Replaces Factory Clock) ATM Ford Mustang, Mounts Two 2-1/16" Gauges Console Pod (Mounts In Factory Shifter Console) ATM Camaro/ Nova, Mounts (4) 2-1/16" Gauges Instrument Cluster Bezels (Mounts Adjacent to Factory Cluster) ATM Ford Mustang, Mounts One 2-1/16" Gauge ATM Ford Mustang, Mounts One 2-1/16" Gauge Steering Column Pod (Mounts Over Steering Column) ATM Ford Mustang, Mounts One 2-1/16" Gauge Dual Pods (Mounts to Windshield Pillar) ATM Ford Mustang, Mounts Two 2-1/16" Gauges ATM Ford Mustang Hard Top, Mounts Two 2-1/16" Gauges ATM Ford Mustang Convertible, Mounts Two 2-1/16" Gauges ATM GM A Body Chevelle/Skylark/Cutlass/LeMans, Mounts Two 2-1/16" Gauges ATM GM A Body Monte Carlo/Cutlass/Grand Prix/Regal, Mounts Two 2-1/16" Gauges ATM Mitsubishi Eclipse/Eagle Talon/Chrysler Laser, Mounts Two 2-1/16" Gauges Dual Pillar Pods (Replaces Factory Windshield Pillar) ATM Ford Mustang Hard Top, Mounts Two 2-1/16" Gauges ATM Ford Mustang Hard Top, Mounts Three 2-1/16" Gauges ATM Ford Mustang Hard Top, Mounts Two 2-1/16" Gauges ATM Ford Mustang Hard Top, Mounts Three 2-1/16" Gauges ATM Chevy Corvette, Mounts Two 2-1/16" Gauges ATM Chevy Camaro/Pontiac Firebird Hard Top, Mounts (3) 2-1/16" Gauges ATM Chevy Camaro/Pontiac Firebird T-Top, Mounts (3) 2-1/16" Gauges ATM Chevy Camaro/ Pontiac Firebird T-Top, Mounts Two 2-1/16" Gauges ATM Chevy Camaro/ Pontiac Firebird T-Top, Mounts Three 2-1/16" Gauges Tach Pod ATM Ford Mustang, Mounts 5" Auto Meter Tach And Two 2-5/8" Gauges Gauge Cages ATM Ford Mustang, Black, Mounts Three 2-5/8" Gauges ATM Ford Mustang, Black, Mounts Two 2-5/8" Gauges ATM Ford Mustang, Black, Mounts Two 2-5/8" Gauges ATM Ford Mustang, Silver, Mounts Three 2-5/8" Gauges ATM Ford Mustang, Silver, Mounts Two 2-5/8" Gauges (With Vents) 89

10 Digital Pro Shift System Self contained, fully programmable Digital Pro Shift System requires no pills or modules. Offered in traditional 2-1/16" dia. tube or 2-1/16" dia. gauge controller/module versions. Tube version includes a special mounting bracket with unlimited rotation and angle adjustments. Units are available to provide three levels of functions. The basic Level 1 unit has a single, programmable shift point and digital RPM display. Level 2 adds five shift point settings (including launch), multicolored shift selection and progressive shift settings. Level 3 adds Playback, which allows playing a recorded run on the digital display or as an output to an Auto Meter tachometer. Level 1 Part No. Level 2 Part No. Level 3 Part No. Description 2-1/16" Dia. Tube Shift Lite, Black ATM5343 ATM5348 ATM /16" Dia. Tube Shift Lite, Silver ATM5344 ATM5349 ATM /16" Dia. Gauge Shift Lite, Sport-Comp ATM3387 ATM3388 ATM /16" Dia. Gauge Shift Lite, Ultra-Lite ATM4387 ATM4388 ATM4389 Quick-Lite Shift Light And RPM Module LED Shift Lite is a replacement option for Auto Meter tachs with large size light. Also functions as an independent shift lite with the Pro Control, or any other RPM-activated trigger. ATM RPM Activated Module (RPM Pills ) ATM Black Quick-Lite Shift-Lite ATM Silver Quick-Lite Shift-Lite Super-Lite Shift Lights Super bright Shift Light features twelve LED s for instant shifting. Brightness may be adjusted with threeway switch for day or night racing. Replaces any existing Auto Meter shift light or may be used independently with ATM5310 RPM Activated Switch. ATM Black Super-Lite Shift Light ATM Silver Super-Lite Shift Light LED Replacement Bulb Kits Upgrade standard gauge lighting to bright LED illumination. Compatible with all Auto Meter gauges (except Auto Gauge), speedometers and most in-dash tachometers. ATM Red ATM Green ATM Blue ATM5344 ATM3387 Pro-Lite Warning Lights Pro-Lite gives an unmistakable warning in the midst of racing action, when there is no time to monitor gauges. Works great with gauges to give first alert to possible problems. ATM Pro-Lite With Red Lens And Red Night Cover, Requires Sender ATM PSI Sender ATM PSI Sender ATM PSI Sender ATM Sender ATM Sender ATM Blue Lens Kit With Lens And Night Cover ATM Yellow Lens Kit With Lens And Night Cover ATM Red Lens Kit With Lens And Night Cover Mini Pro-Lite Warning Lights Lightweight aluminum miniature warning lights operate the same as the Pro-Lite. Bright red bulb gives instant warning of a problem. 12 volt power and sender required. Select from senders listed under Pro-Lite Warning Lights. ATM Mini Pro-Lite Warning Light, Ultra Lite Silver ATM Mini Pro-Lite Warning Light, Black DPIC Compact DPIC provides many of the benefits of other performance meters, in a compact 2-1/16" size. Record and review data for peak horsepower, 1/4 mile elapsed time and speed, reaction time, 0-60 MPH acceleration, 60 to ATM MPH braking distance and G-forces. DPIC meters, in Ultra-Lite and Cobalt models, may be easily mounted in pod, pillar, cup, panel, and custom dash locations. ATM Ultra-Lite DPIC Meter ATM Cobalt DPIC Meter Battery Extender Extend battery life and maintain full charge for maximum performance. Perfect for race cars that sit idle during the winter months, or for lengthy time periods between races. Durable, metal-cased unit has indicators that warn of a bad cell or sulfated battery condition. Micro-controlled charging delivers a 1 amp charge with a 250 milliamp maintenance charge. Also useful for ATV s or motor homes. Available in standard 12 volt and 12/16 volt versions. ATM Volt Battery Extender ATM And 16 Volt Battery Extender DRAG RACING PARTS AND ACCESSORIES

11 Drag Race Oil Pans Wet sump pans offer sophisticated oil control features like crank scrapers, trap door baffles, and uni-directional screens while keeping the sportsman racer s budget in mind. Ideal for Super or bracket classes, pans are 8" deep at the rear with 7 quart capacities. Sold with pickup and installation hardware. May be used with popular starter/flywheel combinations and will fit most chassis except Chevy II. BBP SB Chevy Drag Race Oil Pan With Std. Volume Pickup BBP BB Chevy Mark IV Drag Race Oil Pan With Std. Volume Pickup Intake Manifold Spacers Spacers are machined from aluminum billet to allow installation of high performance big block Chevrolet intake manifolds on tall deck 427 truck blocks. BBP Big Block Chevy, Std. Square Ports BBP Big Block Chevy, Special Alum. (Pontiac, Brodix, Dart) Heads BBP Big Block Chevy, Small Oval Ports Aluminum Valve Cover Spacers Spacers allow use of stock valve covers with roller rockers or stud girdle. Sold per pair. BBP GM LS1 5.7L,.500" Tall BBP GM LS1 5.7L, 1.000" Tall BBP SB Chevy , 1.150" Tall BBP BB Chevy , 1.150" Tall BBP SB Ford W, 1.200" Tall High Strength Oil Pump Driveshafts B&B high grade steel oil pump shafts deliver an extra margin of safety in any drag racing engine. BBP Small Block Ford BBP Small Block Chevy , 5.965" O.A.L. BBP Big Block Chevy Oil Pump Pickup Installation Tools Black oxide-coated, steel tool can be used to properly install press-in style oil pump pickup. Will stand up to every day usage. BBP Pickup Tube Tool, 5/8" Dia. Tubes BBP Pickup Tube Tool, 3/4" Dia. Tubes Blower Drive Service Started in 1969, BDS has become one of the foremost leaders in supercharger technology. Unlike other manufacturers who only have selected applications available, BDS offers 471, 671 and 871 blower kits for not only small and big block Chevrolets, but also small and big block Fords, small and big block and early and late Hemi Chryslers, Oldsmobiles, Pontiacs, Buicks and American Motors. Each blower kit uses the highest quality materials and components to deliver outstanding performance, show winning appearance and a long service life. Easy to install kits include carburetor adapter, blower, blower manifold, drive kit, pulleys, belt and steel crank hub. Kits, are backed by an unprecedented 12 month limited warranty. Available with polished finishes. Blower systems using racing blowers are priced separately. Ed Bawroski DRAG RACING PARTS AND ACCESSORIES Photo By Steve Reese 91

12 Cold-Air Induction Systems BBK s Cold-Air Induction Systems utilize high-flow, washable conical filter elements and lightweight aluminum chrome plated air intake tubes for maximum performance. BBK Ford Mustang 5.0L, Chrome BBK Ford Mustang GT 4.6L, Chrome BBK Ford Mustang 3.8L V6, Chrome Power-Plus Series Throttle Bodies Power-Plus Series throttle bodies provide crisp throttle response and improved air flow for added horsepower. CNC-machined aluminum throttle body has double-sealed bearings, O-ringed throttle shafts and precision die-stamped linkages. Each throttle body includes hardware for installation. Ford BBK Mustang 5.0L/Lightning 5.8L, 70mm BBK EGR Plate, Modified For Use With BBK1501 BBK Mustang 5.0L/Lightning 5.8L, 65mm BBK EGR Plate, Modified For Use With BBK1517 BBK Mustang 5.0L/T-Bird 3.8L V6, 70mm BBK Up Ford 4.6L 2V, exc. F-series Truck, 70mm BBK Up Ford 4.6L 2V, exc. F-series Truck, 75mm BBK Mustang Cobra 4.6L, Twin 65mm BBK Focus 2.0L Zetec/ L V6, 65mm General Motors BBK Camaro/Firebird/Corvette LT-1 TPI, Twin 58mm BBK Camaro/Firebird/Corvette 350 LT-1, Twin 52mm BBK Camaro/Firebird/Corvette 350 LT-1, Twin 58mm BBK Corvette 5.7L LS1, 80mm BBK Camaro/Firebird 5.7L LS1, 80mm SSI-Series Performance EFI Intake Manifolds Utilizing over 15 years of EFI experience, BBK has developed intake manifolds that provide balanced flow to each cylinder for maximum performance. Each lightweight aluminum manifold features a powder coated finish for appearance and corrosion resistance. Manifolds are offered separately or with matching, high BBK5004 performance BBK throttle body. BBK Ford Mustang 5.0L BBK GM LS1 5.7L BBK GM LS1 5.7L, Includes 80mm (BBK1709) Throttle Body, Camaro/Firebird; 04 GTO; GM Full Size, 4.8/5.3/6.0L BBK GM LS1 5.7L, Includes 80mm (BBK1708) Throttle Body, Corvette High Volume Electric Fuel Pump Kits Kits are ideal for stock or modified Mustang V8 s. Offered in two Liters Per Hour (LPH) ratings and include a new strainer assembly. BBK LPH Kit, Mustang V8 BBK LPH Kit, Mustang V8 Adjustable Fuel Pressure Regulators Blue anodized, billet aluminum Regulators are fully adjustable and fitted with precision, leak-free diaphragms. BBK Ford Mustang 5.0L BBK Ford 4.6L 2V/ L 4V/ L BBK Camaro/Firebird/Corvette 305/350 TPI BBK Liquid-Filled Fuel Pressure Gauge Kit High Performance Underdrive Pulley Sets Add an extra 8-15 horsepower by reducing accessory drive speed. Sets are CNC-machined from aircraft quality billet aluminum for exceptional fit and function. Kits include crankshaft, water pump and alternator pulleys. BBK Ford Mustang/ Mercury Capri, 5.0L BBK Ford Mustang GT/Cobra, 4.6L BBK Ford Mustang GT/ Mustang Cobra, 4.6L CNC-Series Full Length Street And Strip Performance Headers Heavy wall, CNC mandrel-bent headers have 1-5/8" dia. primary tubes, 3/8" thick laser-cut flanges and are heavy duty chrome plated or ceramic coated for maximum durability. Headers are offered separately or with mid-pipes, which allow direct bolt-on installation to the factory or aftermarket cat-back system. Sold with gaskets, bolts and screw-in collector studs. BBK Ford Mustang 5.0L Headers, Chrome Finish BBK Ford Mustang 5.0L Headers, Chrome Finish BBK Ford Cobra Headers And Mid-Pipe Kit, Ceramic Finish BBK Ford Cobra Headers And Mid-Pipe Kit, Ceramic Finish BBK Ford Mustang GT Headers And Mid-Pipe Kit, Ceramic Finish BBK Ford Mustang V8 M.I.L. Eliminator Kit, Pair BBK Ford Mustang V8 02 Sensor Wire Extension Kit Heavy Duty Adjustable Clutch Cable Quadrant Kits And Fenderwell Adjusters Heavy duty kits permit precise clutch adjustment and prevent sticky shifts and difficult reverse gear engagement. Kits are available for Ford Mustangs. Blue anodized fenderwell adjuster allows clutch adjustment from under the hood. BBK Kit, Mustang/Cobra, 5-Speed BBK Kit w/fenderwell Adjuster, Mustang BBK Kit w/fenderwell Adjuster, Mustang BBK Clutch Fenderwell Adjuster Kit Only DRAG RACING PARTS AND ACCESSORIES

13 Harmonic Dampers BHJ Harmonic Dampers protect engine from torsional, axial, and radial crankshaft vibrations. All-Steel dampers, with steel outer rings and hub assemblies, are popular for street or racing. Combo dampers with steel outer rings and lightweight aluminum crank hubs offer considerable weight savings. All dampers except Economy units meet SFI 18.1 specifications. Dia. Gross Wt. Balance BHJCHIBS6 SB Chevy 5.7" 5.2 lbs. Internal BHJCHIBS6C SB Chevy Combo With Alum. Hub 5.7" 3.9 lbs. Internal BHJCHIBS7 SB Chevy 6.7" 6.6 lbs. Internal BHJCHIB221* SB Chevy Economy 5.7" 5.2 lbs. Internal BHJCHEB225* SB Chevy Economy 6.7" 7.8 lbs. External BHJCHEBB7 BB Chevy 6.9" 12.2 lbs. External BHJCHIBB7 BB Chevy 6.7" 10.4 lbs. Internal BHJMP-IBB-7 BB Chrysler 6.9" 8.0 lbs. Internal *Not SFI Approved Aluminum Connecting Rods Bill Miller Engineering has been supplying forged aluminum connecting rods to drag racers for over 20 years. BME s newest aerospace alloy connecting rod provides up to a 15% improvement in tensile and yield strength over conventional 7075-T6 aluminum rods. The entire line of BME rods, from ultralight 265 rods for Comp Eliminator to solid beam, blown fuel rods, is available in this aerospace quality alloy. Part No. Application Rod Length Wrist Pin Dia. BME SB Chevy-Lg. Journal 6.000".927" BME BB Chevy 6.385".990" BME BB Chevy 6.535".990" BME Mopar 6.756".990" Portable Power Tender BAT DL-WH Portable Power Tender performs 4-step automatic charging, producing 2.5 or 5 12 volts. Unit features an LED, state of charge indicator and a 72 hour safety timer to protect marginal batteries. 4-Bank Battery Management System BAT DL-WH Capable of maintaining up to four auto, motorcycle or ATV batteries at once with volts. Provides four-step charging and a 72 hour safety timer. Motorsports 16v/12v 20/40 Amp Battery Charger BAT Charge 12 or 16 volt batteries. Includes 4-step charging and a rigid steel chassis with short circuit and reverse polarity protection. Battery Tender Junior BAT step, fully automatic charging and will maintain all types of batteries. Unit produces volts and has a two-color LED state of charge indicator. Battery Tender Plus BAT step, fully automatic charging, produces volts to maintain all types of batteries. Two LED s monitor battery condition and a 72 hour safety timer protects marginal batteries DRAG RACING PARTS AND ACCESSORIES 93

14 Pro Stick Shifter Versatile shifter has interchangeable gate plates to allow 2-, 3-, or 4-speed operation. Suitable for air or electric shifting. One hand operation reverse lockout lever. Includes super duty 5' red race cable and brushed aluminum cover. BMM For 3-Speed GM, Ford And Chrysler BMM Same As BMM80706 Without Cover BMM For Powerglide Only Without Cover Pro Stick Accessories BMM Powerglide Transmission Lever BMM Speed Reverse Pattern Gate Plate BMM Speed Fwd. And Rev. Pattern Gate Plate And Cover BMM Brushed Aluminum Cover With Quick Release Pins Composite X Pro Stick Shifter The legendary Pro Stick features the new CNC-machined aluminum Magnum Grip handle, a real carbon fiber cover, front exit cable and interchangeable gate plates. BMM GM TH-200, 350, 400, 700R-4 And 200-4R; Ford C-4, C-6; Chrysler TF-727, 904, 66-Up BMM GM Aluminum Powerglide Pro Ratchet Shifter Full ratchet-action shifter works with either standard or reverse-pattern valve bodies. Includes neutral safety switch, gear position indicator, and reverse lockout feature that meets NHRA and IHRA requirements. Complete with 5' super duty race cable and aluminum cover. BMM Fits Powerglide BMM80842*... Fits GM 3 And 4 Speed Auto, Ford 3 And 4 Speed Auto, Chry. 3 Speed Auto BMM Installation Kit For Ford AOD Trans. *Also fits Ford AOD trans. with BMM40496 installation kit. Composite X Pro Ratchet Shifter Traditional Pro Ratchet reliability with a CNC-machined, billet aluminum Magnum Grip handle and a real carbon fiber cover. Includes front exit, 5' super duty race cable. BMM81057*...GM TH-200, 350, 400, 700R-4, 200-4R; Ford C-4, C-6, AOD; Chrysler TF-727, 904 BMM GM Aluminum Powerglide *Also fits Ford AOD trans. with BMM40496 installation kit. Pro Bandit Shifter The Powerglide shifter that won a SEMA award for Best New Product. Gate-style shifter has reverse lockout and neutral safety switch. Compatible with standard or reverse pattern valve bodies. Kit includes Shifter, 8' Super Duty Race Cable, Powerglide Pro Lever and quick disconnect. BMM Pro Bandit Race Shifter Complete Kit BMM Pro Bandit Race Shifter Magnum Grip Pro Bandit Shifter New Powerglide shifter combines the performance of the Pro Bandit with the billet aluminum Magnum Grip handle. Shifter is well suited to doorslammers or roadsters due it s larger handle. Offered separately or as a complete kit with 8' super duty race cable, Powerglide Pro Lever, quick disconnect and cable extension. BMM Magnum Grip Pro Bandit Shifter Complete Kit BMM Magnum Grip Pro Bandit Shifter Composite X Black Diamond Shifter BMM81091 Durable, ratchet design completely eliminates missed shifts. Shifter uses a real carbon fiber housing that accepts two 2-1/16" gauges. Ideal for drag race or street/strip vehicles, shifter is compatible with most 3- and 4-speed automatic transmissions. Note: Gauges not included with shifter. Race Shifter Cables And Accessories BMM Alum. Pro Stick Cover, Same Cover Included w/bmm80706 Shifter BMM Super Duty Race Shifter Cable, 2' Long BMM Super Duty Race Shifter Cable, 3' Long BMM Super Duty Race Shifter Cable, 4' Long BMM Super Duty Race Shifter Cable, 5' Long BMM Super Duty Race Shifter Cable, 8' Long BMM Super Duty Race Shifter Cable, 10' Long BMM CO 2 Ram Cylinder, For Pro Bandit Shifters BMM Magnum Grip Button Actuator Plate, Activate Line Lock, Trans-Brake, Nitrous, Etc. Precision Sport Manual Shifters Replaces stock 5- or 6-speed manual shifters in late model performance cars. Stainless steel stick is redesigned for dash clearance, quicker shifts and has a CNC-machined aluminum housing for strength and durability. The Mustang Pro Ripper is a top-of-theline unit, delivering smooth, precise shifts and exceptional durability. Include boot and installation hardware. BMM Ford Mustang, 3650 New! BMM Pontiac GTO New! BMM Chevy Corvette, C-5/C-6 BMM Ford Mustang, T-5/T-45 5-Speed BMM Chevy Camaro/Pontiac Firebird, T-5 5-Speed BMM Chevy Camaro/Pontiac Firebird, T-56 6-Speed BMM Dodge Viper BMM Chevy Corvette, C-4/ZR-1 BMM Ford T-Bird Super Coupe BMM Ford Mustang, T-5/T-45 5-Speed, Pro Ripper Model BMM Ford Mustang, 3650 BMM Honda Civic/Acura Integra; Honda CRX; Honda del Sol BMM Ford Contour; Ford Focus; Mercury Mystique/Cougar DRAG RACING PARTS AND ACCESSORIES

15 HoleShot Torque Converters B&M HoleShot Torque Converters include fully furnace brazed fins and turbine, steel alloy pump drive and new mounting lugs. Nitrous HoleShot converters also include anti-ballooning plates for added durability. Four different stall speeds are available; the HoleShot 2000, 2400, 3000 and Application Nitrous 2400 Nitrous 3000 Nitrous 3600 HoleShot 2000 HoleShot 2400 HoleShot 3000 HoleShot 3600 Chrysler TF-727 (Exc. Lock-Up) BMM10415** BMM10425** Ford C-6, , 1.848" Crank Pilot BMM40480 BMM40412 Ford C-6, , 1.375" Crank Pilot BMM40479 BMM40422 Ford AOD, 11.4" B.C., 1.375" Cr. Pilot BMM40473 BMM40472 BMM40430 GM TH-400 (Exc. Variable Pitch) BMM20480 BMM20481 BMM20482 BMM20416* BMM20412* BMM20413 BMM20425 GM TH-350 (Exc. TH-350C) BMM20480 BMM20481 BMM20482 BMM20416* BMM20412* BMM20413 BMM20425 GM TH-700-R4, 200, 200-4R, 27 Sp. BMM70416 BMM70415 BMM70426 GM TH-700-R4, 30-Spline BMM70417 BMM70419 BMM70421^ GM L60E, V8 Only, 30-Spline BMM70417 BMM70419 BMM70425 GM L60E, LS1 BMM70442 GM Aluminum Powerglide BMM70411 *Requires small, 10-3/4" bolt circle flexplate or dual pattern flexplate. V8 only, retains lock-up feature. May be run as lock-up or non-lock-up. Retains lock-up feature. ^Non-lock-up converter requires transmission modifications. Parts and instructions included. **Externally balanced engines require a B&M flexplate. Has 10" bolt circle. B&M C-6 converters have a 11.4" bolt circle, may require flexplate change. Non-lock-up converter. No input change or transmission modifications required. Supercooler Automatic Trans. Cooler The Supercooler s high efficiency rating provides equal or better cooling than ordinary fin and tube coolers even though it s more compact. Racing model BMM70266 and BMM70274 have 1/2"NPT bungs welded in the top for positive connections. BMM " x 5-3/4" x 3/4", 9,800 BTU BMM " x 6" x 1-1/2", 14,400 BTU BMM70266^^...11" x 8" x 1-1/2", 20,500 BTU BMM " x 7-1/2" x 3/4", 13,000 BTU BMM70274^^...11" x 11" x 1-1/2", 29,200 BTU BMM Cooler Mounting Kit ^^Racing model does not include installation components and has female 1/2"NPT fittings. Can also be used as an engine oil cooler. Hi-Tek Engine Oil And Automatic Transmission Coolers Fin and plate style coolers with 12 volt electric fans and built-in mounting brackets offer quick, efficient cooling and are perfect for trans-brake equipped drag cars. Coolers have 1/2"NPT fittings and thermal switch activated fans when temperatures exceed 175 F. BMM /2" x 9" x 3-1/2", 9-1/2" Dia. 500 CFM, 6 Amps, 7 lbs. BMM " x 7-1/2" x 4", 7" Dia. 350 CFM, 6 Amps, 5 lbs. Trans Fluid Consistency System BMM70355 Designed specifically for maintaining consistent transmission fluid temperature. Aluminum canister is 16" x 6" x 6" and may be mounted anywhere. Trans Temperature Gauge BMM80212 Helps prevent transmission failure by monitoring transmission temperature. Complete with light kit, color-coded dial face, wiring, sending unit and special T-fitting for easy installation DRAG RACING PARTS AND ACCESSORIES Deep Transmission Pans Deep pans provide an additional 2-4 quart capacity, significantly improving the cooling ability of the fluid. No modifications to the dipstick are necessary and a fluid pickup extension is provided. Available in Chrome Steel or Cast Aluminum with built-in drain plugs. Cast Aluminum Pans BMM Chrysler Torqueflite 727, 4 Extra Qts. BMM GM TH400 (3L80), 2 Extra Qts. BMM GM TH350, 3 Extra Qts. BMM Ford C-6, 2 Extra Qts. BMM Ford C-4, 2 Extra Qts. BMM GM Aluminum Powerglide, 2 Extra Qts. Chrome Steel Pans BMM GM TH400 (3L80), 2 Extra Qts. BMM GM TH350, 3 Extra Qts. BMM GM TH700R4 (4L60/E), 3 Extra Qts. Drain Plug Kit BMM80250 Eliminate the mess when removing transmission pans. Install by drilling a hole in pan and bolting in fitting. Powerglide Locking Dipstick BMM22164 Locking Dipstick has a threaded, billet aluminum cap to eliminate fluid loss through the dipstick tube. Attaches directly to the servo cover and is compatible with GM Aluminum Powerglide and Dedenbear case applications. Trick Shift Trick Shift is offered in two formulas: original Trick Shift, often referred to as transmission performance in a bottle, and Synthetic Trick Shift for late model, computer controlled transmissions. Synthetic Trick Shift is formulated with extreme pressure agents, foam inhibitors and thermal stabilizers to prolong transmission life. Sold in one quart bottles. BMM Trick Shift, 1 Qt. Bottle BMM Synthetic Trick Shift, 1 Qt. Bottle BMM70280 BMM