Available 14 to 36 GALLONS PER MINUTE
|
|
- Charleen Blake
- 5 years ago
- Views:
Transcription
1 Custom Fuel Injection Systems Custom Injection Spacers New Fuel Pumps "Gear Pumps" Blowers "New and Rebuilt" Blower Restraints Lower Engine Restraints Custom CNC Machining Computech Distributor NecksGen Distributor
2 Available 14 to 36 GALLONS PER MINUTE
3 WE OFFER A FULL SERVICE SHOP FROM SETUP TO WELD UP Fuel Injection Systems Flow test and service fuel pumps (clean up extra) $ Flow test complete system (Parts extra) $ Install square doors in Enderle injector $ INJECTORS GERARDOT CASTINGS BIRDCATCHER STYLE BORE Attention Nostalgia Racers. Only Mag Birdcatcher available on the market. Labor and material to make injector in to short opening $ Mag. Std. length opening bolt center Round Butterflies, throttle shaft, $ 1, levers, stops, black finish Mag. Std. length opening bolt center Square Butterflies, throttle shaft, $ 1, levers, stops, black finish Mag. Std length opening bolt center - Round Butterflies, Square Barrel $ 2, valve, all lines & nozzles black finish (Complete) Mag. Std length opening bolt center - Round Butterflies, Nitro Barrel valve, $ 2, all lines & nozzles black finish (Complete) Mag. Std length opening bolt center - Square Butterflies, Square Barrel $ 2, valve, all lines & nozzles black finish (Complete) Mag. Std. length opening bolt center Square Butterflies, Nitro Barrel valve, $ 2, all lines & nozzles, black finish. (Complete) Mag. Long opening bolt center Round Butterflies, throttle shaft, levers, $ 1, stops, black finish Mag. Long opening bolt center Square Butterflies, throttle shaft, levers, $ 1, stops, black finish Mag. Long opening bolt center Round Butterflies, Nitro Barrel valve, all $ 2, lines & nozzles, black finish. (Complete) Mag. Long opening bolt center Square Butterflies, Nitro Barrel valve, all $ 2, lines & nozzles, black finish. (Complete) **Dow 7 Finish Add** $
4 Upright Fuel Injector Upright Injector Standard length opening bolt center Butterflies, $ 1, throttle shaft, levers, stops, black finish mag or polished aluminum. Upright Injector Standard length opening bolt center Butterflies, $ 1, Square metering valve, all lines & nozzles, throttle shaft, levers, stops, black finish mag or polished aluminum. (Complete) Upright Injector Standard length opening bolt center Butterflies, $ 2, Nitro Barrel valve, all lines & nozzles, throttle shaft, levers, stops, black finish mag or polished aluminum. (Complete) K&N Air Filter with purchase of injector / sold separately $ / Carbon Fiber Air Scoop for upright injector $ Carbon Fiber Air Scoop for upright injector with tray $ Fiberglass Air Scoop for upright injector $ Fiberglass Air Scoop for upright injector with tray $ **Dow 7 Finish add the following** $ A-Fuel Injector Upright A-Fuel Injector Long opening bolt center Butterflies, throttle shaft, levers, stops, black finish mag. For injected fuel dragsters-barrel valve mounts available on request $ 1, Low Profile Injectors Low Profile Injector to fit 10.5 Opening Complete with nitro barrel valve (Magnesium) $ 2, Low Profile Injector to fit Opening Throttle shaft-butterflies-stops-throttle levers - (Magnesium) $ 1, Center Divider for Low profile Injector $ The Big "V" **Aluminum or Magnesium** Carbon Fiber Replacement with Center Divider Diameter Butterfly Option Replacement for Carbon Fiber injector polished- throttle shaft-butterflies-center divider-aluminum $ 1, Replacement for Carbon Fiber injector polished- throttle shaft-butterflies-center divider-magnesium $ 2, Replacement for Carbon Fiber injector-no polish-empty housing-aluminum (ADD $ $ 1, Replacement for Carbon Fiber injector-polished-empty housing-aluminum(add $ for Mag) $ 1, Replacement for Carbon Fiber injector-polished-aluminum-complete (ADD $ for-Mag) $ 2, ENDERLE FUEL INJECTORS Install square doors in Enderle injector $ Alum. Gas Bugcatcher (Complete) (Square Barrel Valve) $ 1, Alum. Gas Bugcatcher w/ Fins (Complete) (Square Barrel Valve) $ 1, Alum. Methanol Bugcatcher (Complete) (Square Barrel Valve) $ 1, Alum. Methanol Bugcatcher w/fins (Complete) (Square Barrel Valve) $ 1, Alum. Nitro Barrel Valve Birdcatcher (Complete) $ 1, Alum. Methanol Buzzardcatcher (Complete) $ 1, Alum. Nitro Barrel Valve Buzzardcatcher (Complete) $ 1, Big and Ugly Tall Injector / Carbon Fiber Replacement Nitro Barrel Valve 5.62 bore (Complete) $ 2, Big and Ugly Tall Injector / Carbon Fiber Replacement Nitro Barrel Valve 5.00 bore (Complete) $ 2, Big and Ugly Tall Injector / Carbon Fiber Replacement Nitro Barrel Valve 4.37 bore (Complete) $ 2,520.90
5 TUNNEL RAM INJECTORS Tunnel ram injectors include the following parts; Injector hat, metering valve, idle & secondary check valves, bypass pills, distribution block, nozzles, and fuel lines for the intake manifold. The manifold, manifold top, fuel pump, fuel shut off, etc. must be ordered separately. Birdcatcher Tunnel Ram Injector $ 1, Buzzardcatcher Tunnel Ram Injector $ 1, Bugcatcher (aluminum) Tunnel Ram Injector $ 1, Big & Ugly Tall Tunnel Ram Injector 5.56 Butterflies $ 2, Big & Ugly Tall Tunnel Ram Injector 5.00 Butterflies $ 2, Big & Ugly Tall Tunnel Ram Injector 4.44 Butterflies $ 2, Big & Ugly Low Profile Tunnel Ram Injector 5.56 Butterflies $ 2, Upright Injector with Carbon Fiber scoop T Ram Injector $ 2, Upright Injector no scoop T Ram Injector $ 1, Top adapter for Edelbrock 7075 Big Block or 7070 small block manifold $ Drill and tap manifold for distribution block and nozzles $ FUEL PUMPS (All fuel pumps are coated) 80A Enderle (3002) $ Enderle (3004) $ Enderle (3004A) $ Enderle (3004B) $ Enderle (3005) $ Enderle (3006) $ Enderle (3007) $ Enderle (3008) $ Enderle (3009) 21 Gallon Nostalgia Pump $ Hilborn $ Hilborn $ FUEL SHUT OFFS #6 2-way with fittings (85105) $ #6 3-way with fittings (85110) $ #6 4-way with fittings (85115) $ #8 2-way with fittings (85205) $ #8 3-way with fittings (85210) $ #8 "Special Reverse" 3-way with fittings (85210B) $ #8 4-way with fittings (85215) $ #12 2-way with fittings (85305) $ #12 3-way with fittings (85310) $ #12 4-way with fittings (85315) $ #16 2-way with fittings (85405) $ #16 3-way with fittings (85410) $ #16 4-way with fittings (85415) $ Shut off Cable Bracket for 80A Pump (80ABR) $ Shut off Cable Bracket for 110 Pump (110BR) $ Morse Cable Bracket (36174) $ Aluminum Bracket Only for 80A Pump (80ABRA) $ Aluminum Bracket Only for 110 Pump (110BRA) $ Covers and Drives Fuel Pump Extension under 4.5 inches long $ Fuel Pump Extension over 4.5 inches long $ Chevy Hex Drive (5005) $ Chevy Hex Drive Jackson (5005J) $ Chevy thrust bearings (5006) $ 18.45
6 Covers and Drives Chevy thrust spring (5007) $ 1.60 Chevy thrust shims (5007A) $ 0.78 Chevy Hex Drive Assy w/ bearings & shims (5008) $ Chevy Hex Drive Assy - Jackson (5008J) $ Chevy Hex Drive Assy w/ bearings & springs (5008A) $ Ford Hex Drive (5009) $ Chry Hex Drive (5005A) $ Chevy Big Block front cover (5004) $ Chevy Small Block front cover (5001) $ Chevy Small Block front cover seal (5002) $ Ford front cover (5003) $ Chevy Big Block timing belt pump drive assy (5010) $ Chevy Big Block mandrel style timing belt pump drive assy (5010A) $ Chevy Small Block timing belt pump drive assy (5011) $ Chevy Small Block mandrel style timing belt pump drive assy (5011A) $ Ford Small Block timing belt pump drive assy (5012) $ Chry timing belt pump drive assy (5014) $ Timing belt pump drive for blown engine (5014A) $ Ford Big Block timing pump drive assy (5015) $ Belt drive pump bracket (5016) $ Belt drive pump bracket casting (5016C) $ Tooth large timing belt pulley (5017) $ Tooth large timing belt pulley (5017A) $ Tooth small timing belt pulley.625 Bore (5018) $ Tooth small timing belt pulley.625 Bore (5018A) $ Tooth small timing belt pulley 1.0 Bore (5018-1) $ Tooth small timing belt pulley 1.0 Bore (5018A-1) $ Belt drive crankshaft flange - Chevy (5019C) $ Belt drive crankshaft flange - Chry (5019CHR) $ Belt drive crankshaft flange - Ford (5019F) $ Belt drive crankshaft mandrel - Small Block Chevy (5019AASB) $ Belt drive crankshaft mandrel - Big Block Chevy (5019AABB) $ Alum crank flange spacer - Small Block Chevy (5019BC) $ Alum crank flange spacer - Chry (5019CHR) $ Alum crank flange spacer - Ford (5019BF) $ Belt drive blower crank drive assy (5019BL) $ Chevy Small Block engine bracket (5020) $ Chevy Big Block engine bracket (5021) $ Timing belt (5022) $ Pump bracket hex shaft (5023) $ Chry engine bracket (5024) $ Ford Small Block engine bracket (5025) $ Ford Big Block engine bracket (5026) $ Pump bracket bearing (5203ZZ) $ Dual pump drive gearbox - alum (4116) $ Magneto / pump dual drive gearbox (4116PM) $ Gearbox mag drive assy (88-109) $ Dual pump drive gear (4118) $ Dual pump drive shaft - male (4119) $ Dual pump drive shaft - female (4120) $ Fuel Filter High Pressure $ Fuel Filter for inlet line ( no fittings) $ 83.05
7 MISCELLANEOUS FUEL SYSTEM COMPONENTS Billet double end throttle levers $ Billet single end throttle levers $ Distribution block with (8) Nozzles $ Distribution block with (12) Nozzles $ Distribution block with (16) Nozzles $ Nitro style barrel valve for methanol $ Square style barrel valve for methanol $ Nozzles $ 5.40 Nozzles Flowed $ 9.00 Jets $ 4.70 Jets Flowed $ 8.00 Small Jet Holders $ Large Jet Holders $ Nozzle Holders $ All #6 Check Valves $ All #8 Check Valves $ Hat Line Sets $ Individual Hat Lines $ Port Line Sets $ Individual Port Lines $ Nozzle Bodies $ Hose w/ (1) 90 deg. End $ CUSTOM INJECTOR SPACERS From 2 4 inches high $ From 4-7 inches high $ BLOWER RESTRAINTS 14-1 Adjustable straps fits any blower 6-71 to $ Top Plate Only $ Straps $ Header Bracket & pin assembly Set $ Header Brackets w/ pins each $ Header Bracket Pins each $ Heat Shield set $ Recertification of 14.1 $ Restraint (Complete) (includes header brackets) $ Bag Only 14.2 $ Plate & Straps $ Header Bracket Set (5 piece set) $ Rear Header Bracket Assembly $ Recertification of 14.2,14.21, & 14.3 $ PSI Blower Restraint (Complete) (header brackets extra) $ 1, Bag Only $ Plate & Straps $ Nostalgia Restraint (Complete) (header brackets extra) 6-71 & 8-71 Blower $ 1, Restraint (Complete) (header brackets extra) Blower $ 1, Top Plate only14.3 $ Bag only 14.3 $ Bottom Plate 14.3 $ LOWER ENGINE RESTRAINT Flexible Bags (SFI Accepted) 7-1 spec. $ NHRA & IHRA Accepted Flexible Bags (Step-pans add ) $
8 BLOWERS AND BLOWER REPAIRS We Stock All Standard Blower Belt Sizes We Also Stock All Types of Pulleys and Drives Restrip and service blower $ Blower stripping "full round" by the foot $ 3.60 Blower stripping "half round" by the foot $ 2.90 Blower stripping "Nylatron" by the foot $ 2.00 Blower timing, cut for clearance, square top and bottom (each) $ Weld rotors Time and Material 6061 T6 Blower Studs & Nuts (set) $ T6 Blower Studs & Nuts (set) $ Blower Gel Lubricant Spray $ Blower snout seal and bearing replacement (minimum cost + parts) $ Screen Injector Gasket $ "No Screen" Injector Gasket $ Blower Base Gasket $ Miscellaneous **Chrysler hemi rocker arm stands **Combination blower belt idler / MSD44 / mag support **Set back blower drives custom lengths **Set back blower drive supports integral to combination blower belt idler / mag support **Blower belt guards Computech Weather Stations RaceAir Pro Weather Station (#1000) $ RaceAir Competition Weather Analyzer (#3000) $ DataMaxx Data Logger Bracket Kit w/sensors (#8000) $ 1, NTPA Multi-Engine Custom Fit Gear Box Blankets Available in Ballistic Nylon or Kevlar
9 Custom Transmission Blankets in Kevlar LencoDrive $ Lenco CS1 2-Speed w/ Reverser $ Lenco CS1 3-Speed w/ Reverser $ Lenco CS2 New Generation $ Lenco Reverser $ Rob Moore Reverser $ B&J 2-Speed w/reverser 2-Piece $ B&J 3-Speed w/reverser 2-Piece $ Rob Moore Reverser $
Discount Prices & Free Tech: 800/ Blower Injectors. Tunnel Ram Injectors. Tech Questions? 562/
Discount Prices & Free Tech: 800/576-7661 Blower Injectors Tunnel Ram Injectors Tech Questions? 562/945-7669 Complete Stock Of Enderle Components at Discount Prices Components Blower Port Line Kit Complete
More informationTunnel Ram Injector Kit
Tunnel Ram Injector Kit LOWE Fuel Systems Phone (Inside Australia) 0411-699 535 In drag racing applications there are a lot of reasons to use a tunnel ram type injector instead of the old style stack injector.
More informationLOWE Fuel Systems Throttle Body Injector System The Carburetor Replacement Page 1 of 7
LOWE Fuel Systems Throttle Body Injector System The Carburetor Replacement Page 1 of 7 LOWE Fuel Systems Throttle Body Injector System The Carburetor Replacement Page 2 of 7 Racer Decal Discount Prices
More informationSee controls section for cables and linkages to connect throttle levers to the throttle pedal.
LOWE Industries PO Box 180 Rosewood, Qld 4340 Australia www.kenlowe.com.au Phone 0411-699 535 Supercharged Fuel Injector Kit LOWE Fuel Systems This injector is calibrated for supercharged applications.
More informationREQUIRES SPECIAL TOOLS TO INSTALL. SEE REPAIR INSTRUCTION MANUAL. 411 718 38 3 1027 1 127 127 127A 1080 1081 1028 127 718A 127 718 44B 718A 2 44A 493 44 1069 112 718B 1019 LABEL KIT 1058 OWNER S MANUAL
More informationIPE OUT ENTERPRISES 6523 Dawson Road Sidney, OH (937) Phone (937) Fax
IPE OUT ENTERPRISES 6523 Dawson Road Sidney, OH 45365 (937) 497-9473 Phone (937) 497-9473 Fax www.wipeoutenterprises.com Engine and Engine Components: 525 4 9/16" Bore Engine Kit Block Does Not Need Bored
More informationLIMITED LATE MODEL. A. Standard Dirt Style body required. A stock appearing nose is required.
LIMITED LATE MODEL BODY: A. Standard Dirt Style body required. A stock appearing nose is required. B. Schaeffer Oil Southern nationals Body rules apply. C. See tech inspector if you have any questions.
More information4. Hickory little engine: 3000/1350 lbs. with driver. (3050/1375 with 500 gram pistons).
2018 Limited Late Model Stock Rules $1000 fine for tire soaking $100 fine for antifreeze The Limited Late Model Limited Division will run under the 2018 NASCAR Whelen All American Series Late Model Stock
More informationCylinder Assy. (2-1/2" Bore) (Cast-iron Pin, Dowel Plug, Drain Seal, Oil A 0 Valve, Intake (Standard)
H35-45234F Page 1 of 8 H35-45234F Page 2 of 8 1 31270 0 Cylinder Assy. (2-1/2" Bore) (Cast-iron 2 26727 0 Pin, Dowel 3 27642 0 Plug, Drain 3A 27642 0 Plug, Drain 4 29183 0 Seal, Oil 5 29314A 0 Valve, Intake
More informationNOVEMBER 2017 PRICING GUIDE - ALL PRICES SUBJECT TO CHANGE WITHOUT NOTICE
NOVEMBER 2017 PRICING GUIDE - ALL PRICES SUBJECT TO CHANGE WITHOUT NOTICE CS1 STANDARD CASE LIGHT WEIGHT TRANSMISSIONS (1" GEAR SETS) DESCRIPTION RACER 2-SPEED ONLY 3,335.00 2-SPEED ADD-ON SECTION 3,075.00
More information2017 Thunder Series 602 Thunder Series Rules
2017 Thunder Series 602 Thunder Series Rules Chassis: 1. Must follow FASTRAK rules. 2. Chassis must be built prior to 2014 Body: 1. Must follow FASTRAK body rules 2. 8 spoiler permitted 3. No 12 side braces
More informationRead all instructions before beginning machining or assembly.
A4 blocks now come with steel billet main caps only (all 5 are cross bolted. Aluminum replacement caps can be special ordered directly from Pro Gram Engineering phone (330) 745-1004. Head Studs: Head stud
More informationOllie s Wholesale Price List
ALIGN BORE MAINS DECK CYLINDER SURFACE 911-930 395.00 (head studs must be removed) 356-912 275.00 911-930 150.00 Thrust Cut 4 Cylinder 195.00 356-912 130.00 Inspection of Case 95.00 Remove Head Studs 80.00
More informationWIPE OUT ENTERPRISES 6523 Dawson Road Sidney, OH (937) Phone (937) Fax
WIPE OUT ENTERPRISES 6523 Dawson Road Sidney, OH 45365 (937) 497-9473 Phone (937) 497-9473 Fax www.wipeoutenterprises.com Engine and Engine Components: 525 4 9/16" Bore Engine Kit Block Does Not Need Bored
More information14A6816H190 GT-2150 (2003) Page 1 of 28 Carburetor
14A6816H190 GT-2150 (2003) Page 1 of 28 Carburetor 14A6816H190 GT-2150 (2003) Page 2 of 28 Carburetor TC-640221 1 /P Carburetor (Incl 184 of Engine Parts Lists) 1 TC-640216 1 Throttle Shaft & Lever Assembly
More informationIllustrated Parts List to
Illustrated Parts List Model Series 176400 to 176499 TYPE NUMBERS 0035, 0049, 0050, 0101, 0103, 0113, 0114, 0115, 0116. FORM MS 0419 9/97 REPLACES FORM MS 0419 5/97 FILE IN SECT. 2 OF SERVICE MANUAL 176400
More informationPage 1 of HP B&S Vanguard Engine
1405 Page 1 of 41 14 HP B&S Vanguard Engine 1405 Page 2 of 41 14 HP B&S Vanguard Engine Ref # Part Number Qty S/P/F Description BS-28Q777-0647-E1 1 14 HP B&S Vanguard Engine 1 BS-496412 1 Cylinder Assembly
More informationIllustrated Parts List
FORM MS 4183 10/31/2006 REPLACES FORM MS 9748 7/1997 FILE IN SECT. 2 OF SERVICE MANUAL 290700 Illustrated Parts List Model Series 290700 TYPE NUMBERS 0100, 0102, 0106, 0107, 0108, 0333, 0402, 0410. TO
More information2013 Senoia Raceway Rulebook
2013 Senoia Raceway Rulebook E-mail tech questions to: johnnywalls31@yahoo.com BOMBER RULES BODY 1. All bodies must be stock steel bodies. No fiberglass or aluminum body panels allowed. Fenders and quarter
More informationHOLLEY DESIGNED & BUILT!
MECHANICAL FUEL PUMPS HOLLEY DESIGNED & BUILT! The Holley line of high output mechanical fuel pumps has been completely redesigned for 2001. Their new aluminum housings save weight and all components have
More informationIllustrated Parts List to
TYPE NUMBERS 0022 through 0035, 0040 through 0062, 0070, 0076,0100, 0102, 0120 through 0125, 0307, 0318,0320, 0326, 0340 through 0366, 0370 through 0378, 0382, 0385, 0390, 0391, 0394, 0398, 0402, Illustrated
More informationLOWE Fuel Pump Drive Kit / Front Engine Mount fits SBF Windsor JESEL Belt Drive KBD34175
LOWE Industries PO Box 180 Rosewood, Qld 4340 www.kenlowe.com.au Phone 0411-699 535 LOWE Fuel Pump Drive Kit / Front Engine Mount fits SBF Windsor JESEL Belt Drive KBD34175 SBF Windsor with JESEL Belt
More informationLOWE Industries. SBF Windsor/Fontana Fuel Pump Drive Kit Timing Chain Shown with modified front timing chain cover below
LOWE Industries PO Box 180 Rosewood, Qld 4340 Australia www.kenlowe.com.au Phone 0411-699 535 SBF Windsor/Fontana Fuel Pump Drive Kit Timing Chain Shown with modified front timing chain cover below PN
More informationMission Statement. How to Contact Us
2010-2011 Since 1985 Mission Statement At Good Vibrations Motorsports we strive to provide high quality performance products at discount prices without sacraficing customer service. Why Buy From Good Vibrations?
More informationCarrier Transicold Diesel Engine CT4-91-TV (V1505) Service Parts List Rev A
Carrier Transicold Diesel Engine CT--TV (V0) Service Parts List -0 Rev A Service Parts List DIESEL ENGINE CT--TV (V0) CONTENTS INTRODUCTION... REPLACEMENT ENGINE PART NO.... ORDERING INSTRUCTIONS... GENERAL
More informationInstrument Panel Steering Column Mounting Bracket Welds to top of steering column to mount instrument panel and switch box brackets.
LOWE Industries PO Box 180 Rosewood, Qld 4340 www.kenlowe.com.au Phone 0411-699 535 Instrument Panel Steering Column Mounting Bracket Welds to top of steering column to mount instrument panel and switch
More information2018 Senoia Raceway Rulebook Limited Late Model
All drivers must adhere to the general rules, in addition to the division specific rules set forth below. Senoia Raceway Limited Late division allows four engine packages. A. 604 Crate Engine 2250lbs 8
More informationMission Statement. How to Contact Us. Sales & Tech Crew We re here to serve you!
2011-2012 Since 1985 Mission Statement At Good Vibrations Motorsports we strive to provide high quality performance products at discount prices without sacraficing customer service. Why Buy From Good Vibrations?
More informationIllustrated Parts List Vanguard to Compliance
Non-Compliance Illustrated Parts List Vanguard Model Series 104700 to 104799 FORM MS-9878 7/93 REPLACES FORM MS-9878 5/92 FILE IN SECT. 2 OF SERVICE MANUAL 104700 to 104799 Compliance TYPE NUMBERS 0101,
More informationS/N 1H019H - 1H310H Page 1 of 33 46" Cutting Deck Assembly
1180 S/N 1H019H - 1H310H Page 1 of 33 46" Cutting Deck Assembly 1180 S/N 1H019H - 1H310H Page 2 of 33 46" Cutting Deck Assembly 1 17982 1 S Reinforcement Spindle Plate 2 618-0430 1 S Spindle Assembly w/
More informationRULE BOOK DISCLAIMER
RULE BOOK DISCLAIMER The rules and/or regulations set forth herein are designed to provide for the orderly conduct of racing events and to establish minimum acceptable requirements for such events. These
More informationLOWE Industries. LOWE Industries Race car hardware for the serious racer Phone Page 1 of 40
LOWE Industries PO Box 180 Rosewood Qld 4340 Australia www.kenlowe.com.au Phone 0411-699 535 International Phone 01161-411-699 535 v160101-1 LOWE Industries Race car hardware for the serious racer Phone
More informationLOWE Industries. Fuel Pump Cam Drive BBC JESEL Standard Cam Location. Complete Kit Fits JESEL KBD Other items you may need..
LOWE Industries PO Box 180 Rosewood, Qld 4340 Australia www.kenlowe.com.au Phone 0411-699 535 Fuel Pump Cam Drive BBC JESEL Standard Cam Location Complete Kit Fits JESEL KBD32000 Fuel pump mounting holes
More informationMotorcycle parts compatibility on ebay.co.uk
Motorcycle parts compatibility on ebay.co.uk Review the full list of categories and subcategories in which you can list motorcycle and scooter parts. Last updated: 10 August 2016 Motorcycle Parts (10063)
More information122 Fasola Road, Sequim Wa (360) Morgan +4 Engine Rebuild Brochure
122 Fasola Road, Sequim Wa 98382 (360) 582-9020 Morgan +4 Engine Rebuild Brochure This brochure is intended to show the extensiveness of the work performed on the TR engines that I rebuild. I treat each
More informationLOWE Industries. SBF Cleveland Chain Fuel Pump Drive Kit Front Engine Plate
LOWE Industries PO Box 180 Rosewood, Qld 4340 Australia www.kenlowe.com.au Phone 0411-699 535 SBF Cleveland Chain Fuel Pump Drive Kit Front Engine Plate 351C Ford Cleveland Front plate only but plate has
More informationELIGIBLE MODELS Chevy C-10 GMC 1500 Dodge Ram Ford F-150
2018 SUPER TRUCKS RULES $1000 fine for tire soaking $100 fine for antifreeze ELIGIBLE MODELS Chevy C-10 GMC 1500 Dodge Ram Ford F-150 HMS Enforcer (Harrington Spec) 2850/1265 lbs with driver 1. Minimum
More informationPLEASE BE SURE YOU HAVE READ AND UNDERSTAND THE GENERAL RULES, SAFETY RULES AND DRIVER SAFETY EQUIPMENT BEFORE CONTINUING.
2017 SPORTSMAN RULES Any rule changes made in 2017 are highlighted in RED. *Speedway Officials shall be empowered to permit minor deviations from any of the specifications herein or impose any further
More informationS/N 1H019H - 1H310H Page 1 of 48 42" Cutting Deck Assembly
1170 S/N 1H019H - 1H310H Page 1 of 48 42" Cutting Deck Assembly 1170 S/N 1H019H - 1H310H Page 2 of 48 42" Cutting Deck Assembly 4 683-0254 1 S Deck Adjustment Bracket w/ Weld Nut 9 710-0528 1 /P Hex Cap
More informationIllustrated Parts List to
Illustrated Parts List Vanguard Model Series 161400 to 161499 TYPE NUMBERS 0010 through 0036, 0040, 0041, 0047, 0049, 0051, 0070, 0073, 0079 through 0085, 0090, 0101, 0110 through 0135, 0199. FORM MS 9877
More informationH132 Rear-Engine Riding Mower
Form Number H132 Rear-Engine Riding Mower Model No. 70186-260732867 and up. Parts Catalog Ordering Replacement Parts To order replacement parts, please supply the part number, the quantity, and the description
More information17-44HXLE Lawn Tractor
Form Number 3350-107 17-44HXLE Lawn Tractor Model No. 71283-240000001 and up. Parts Catalog Ordering Replacement Parts To order replacement parts, please supply: the part number, the quantity, and the
More informationFor Sale RWHP 1995 Mustang SVT Cobra
For Sale - 800 RWHP 1995 Mustang SVT Cobra 52,000 mile 1995 Mustang Cobra with Rio Red exterior and Black Leather interior. Purchased bone stock by the current owner in December of 2000 with 40,000 miles.
More informationGeneral Engine Rules Common to all Makes:
NEEDMORE SPEEDWAY 2017 CRATE LATE MODEL ENGINE RULES Engine in car must match manufacturer of body used. Example: Ford Thunderbird must run Ford Engine: Camaro must use Chevy Engine: Dodge Intrepid must
More informationIllustrated Parts List to
Illustrated Parts List Model Series 171400 to 171499 TYPE NUMBERS 0035 through 0131, 0235, 0249, 0270, 0300 through 0308, 0435 through 0470, 0500 through 0505, 0520 through 0535, 1035, 1049, 1070, 1100,
More informationBlower Drive B-1 Section Contents. Page. Drive Belts B-2. Belt Length Chart B-3. Sprockets B-4. Sprockets B-5. Sprocket Sectional Views B-6
Blower Drive B-1 Section Contents Drive Belts Belt Length Chart Sprockets Sprockets Sprocket Sectional Views 14mm Overdrive Chart 8mm Overdrive Chart 8mm Overdrive Chart 11mm Overdrive Chart Idler Pulleys
More informationSANDIA SPEEDWAY 2018 STREET STOCK DIVISION RULES
SANDIA SPEEDWAY 2018 STREET STOCK DIVISION RULES DRIVER: The minimum age for a driver is fourteen (14), unless approved by two of the following three: race director, tech inspector or promoter. All required
More informationFor Discount Tecumseh Engine Parts Call or ECH A Page 1 of 8 Engine Parts List #1
www.mymowerparts.com For Discount Tecumseh Engine Parts Call 606-678-9623 or 606-561-4983 ECH90-146008A Page 1 of 8 For Discount Tecumseh Engine Parts Call 606-678-9623 or 606-561-4983 ECH90-146008A Page
More information2018 ROCKY MOUNTAIN SPRINTS RULES
2018 ROCKY MOUNTAIN SPRINTS RULES November 1, 2017 1. ROLL CAGE Roll cage must be constructed from 4130 condition N seamless steel tubing, top rails min. 1.5 outside diameter x.095 wall. Bottom rails 1.5
More informationEdelbrock Victor II Intake Manifold. For Chrysler 5.7L (Eagle), 6.1L and 6.4L Gen III HEMI Engines Part #7179
For Chrysler 5.7L (Eagle), 6.1L and 6.4L Gen III HEMI Engines PLEASE study these instructions carefully before beginning this installation. You should be familiar with and comfortable working on your
More informationFor Discount Tecumseh Engine Parts Call or HH E Page 1 of 8 Engine Parts List #1
HH60-105080E Page 1 of 8 Engine Parts List #1 HH60-105080E Page 2 of 8 Engine Parts List #1 1 34761 0 Cylinder Assy. (Cast iron liner) (2-5/8" 2 27652 0 Pin, Dowel 3 27642 0 Plug, Drain 4 27876B 0 Seal,
More informationEdelbrock Victor II Intake Manifold. For Chrysler 5.7L (Eagle) and 6.1L Gen III HEMI Engines Part #7179
For Chrysler 5.7L (Eagle) and 6.1L Gen III HEMI Engines PLEASE study these instructions carefully before beginning this installation. You should be familiar with and comfortable working on your vehicle.
More informationPage 1 of 9 303-01C Engine 6.0L Diesel 2004 F-Super Duty 250-550/Excursion DESCRIPTION AND OPERATION Procedure revision date: 08/06/2003 Engine Printable View Engine Description The 6.0L diesel engine
More informationIGNITION ACCESSORIES COIL COVERS COIL BRACKET CHROME TOP HAT WIRE RETAINER CHROME PLATED VACUUM ADVANCE COVER SPARK PLUG BOOT INSULATORS 6012G
IGNITION ACCESSORIES COIL COVERS Chrome plated steel coil covers feature universal design to accept most stock coils. Includes chrome plated mounting bracket. Universal Coil Cover, horizontal mount...9777
More informationIllustrated Parts List to 83499
Illustrated Parts List Model Series 83400 to 83499 TYPE NUMBERS 0101, 0105, 0106. FORM MS 5308 5/97 REPLACES FORM MS 5308 1/95 FILE IN SECT. 2 OF SERVICE MANUAL 83400 to 83499 TO FIND THE CORRECT NUMBER
More informationLavonia Speedway 2018 Racing Season
Lavonia Speedway 2018 Racing Season Stock 4 Cylinder- (Window Safety Net & Mufflers are Mandatory) (*note 2 engine combinations*) BODY - A. Stock auto only B. May have complete aluminum body C. Inner panel
More informationVintage Tractor Pulling Association General Class Rules (Rev ) 1. Tractors must be 1959 or older (Tractor series must start by 1959).
Vintage Tractor Pulling Association General Class Rules (Rev. 1-26-18) 1. Tractors must be 1959 or older (Tractor series must start by 1959). 2. Any agricultural type carburetor allowed. Must be the same
More informationP843NSATS For Models: NL843N2, NL843NW2, and NL843NW3 PARTS CATALOG. Marine Generators Marine Diesel Engines Land-Based Generators
P843NSATS For Models: NL843N2, NL843NW2, and NL843NW3 PARTS CATALOG Marine Generators Marine Diesel Engines Land-Based Generators CALIFORNIA Proposition 65 Warning: Diesel engine exhaust and some of its
More informationSUPERCHARGERS & ACCESSORIES
SUPERCHARGERS & ACCESSORIES Nitrous Bottle Heaters Nitrous Bottle Heater ZEX82006 Plug-In Nitrous Bottle Heater ZEX82045 Programmable TPS Switch Programmable TPS Switch ZEX82108 Traction Control Window
More information3. Bumpers: Steel tube front and rear bumpers are required. Bumpers must be centered at 19 inches from the ground, +/- 2 inches.
THUNDERCAR RULES * These rules may be amended at the official s discretion. * No additions, subtractions, alterations, or non-oem type parts allowed unless specifically allowed in the rules. Visiting cars
More information2016 Rules and Regulations
2016 Rules and Regulations Classes Adult Wing Junior II Wing Junior I Wing 641-204-9551 1102 E 8 th ST S Newton IA 50208 3-22-16 Amended 04/16/16 Cage Requirements Base Frames must be of kart configuration.
More information420cc Builder Modified Predator OHV engine Technical Specifications 5/27/13
BM (Builder Modified) Predator 420cc OHV engine With Electric Start Approved Engine: OHV Predator 420cc engine modified only according to these BM OHV Engine Spec. ENGINE SPEC SHEET FOR BM 420cc OHV CLASS
More information2018 BLUE RIDGE MOTORSPORTS PARK RULEBOOK LIMITED LATE MODEL
2018 BLUE RIDGE MOTORSPORTS PARK RULEBOOK LIMITED LATE MODEL The rules and/or regulations set forth herein are designed to provide for the orderly conduct of racing events and to establish minimum acceptable
More informationAlternator bracket Box 1. Alternator engine plate Box 1. Alternator pulley Box 1. Alternator spacer (1.760") Box 1
NASCAR SPEC ENGINE KIT PACKING LIST Part + Required Fasteners Quantity RYRE Part # Box # Inside Crate Alternator 1 100001 Individual Box 3/8-24 x 5.00 Hex 1 7/16-14 x 5.50 Hex 1 3/8-24 Flanger Nut 1 3/8
More information2012 Street Stock Rules
Rules & Regulations Updated 11/26/11 CHASSIS: 1. Cars must be 1960 or newer, stock passenger type cars. 2. No Commercial vehicles, convertibles, sports cars or Novas allowed. No leaf spring cars. 3. Frame
More informationHeat treated and black oxide finish For use in hydraulic lifter applications with less than 400 lbs. open spring pressure and under 7500 rpm
PUSHRODS Small Block Chevrolet Swedged End Pushrods.080 Wall 1010 Steel Heat treated and black oxide finish For use in hydraulic lifter applications with less than 400 lbs. open spring pressure and under
More information2015 Super Stock verses Street Stock. Rules UPATES 2/12/2015
2015 Super Stock verses Street Stock Rules UPATES 2/12/2015 1. All racecars must display Super Stock or Street Stock at which it will compete on left side windshield post. Must be two (2) inches tall.
More informationOUTLAW PRO MOD Beginning with ODRC/ HEADS UP MADNESS October 26-28, 2018
OUTLAW PRO MOD Beginning with ODRC/ HEADS UP MADNESS October 26-28, 2018 CLASS OVERVIEW: Xtreme Pro Mod is a 1/8 th mile class. Entries have the option to run either a 6cyl, small block or big block engine
More informationFUEL Nitromethane and methanol permitted (65% minimum nitromethane). All other fuels prohibited.
Nostalgia Funny Car DESIGNATION N/FC, preceded by number. Reserved for pre-1980 Automobile bodied, nitro-burning Funny Cars built specifically for all-out drag racing competition. Minimum weight at conclusion
More informationSECTION D Engine 6.0L Diesel
303-01D-i Engine 6.0L Diesel 303-01D-i SECTION 303-01D Engine 6.0L Diesel CONTENTS PAGE DESCRIPTION AND OPERATION Engine... 303-01D-2 303-01D-2 Engine 6.0L Diesel 303-01D-2 DESCRIPTION AND OPERATION Engine
More informationP773-2 For Model: M773LW2 PARTS MANUAL. Marine Generators Marine Diesel Engines Land-Based Generators
P773-2 For Model: M773LW2 PARTS MANUAL Marine Generators Marine Diesel Engines Land-Based Generators CALIFORNIA Proposition 65 Warning: Diesel engine exhaust and some of its constituents are known to the
More information13A2693G190 LT-165 (2003) Page 1 of 31 Carburetor
13A2693G190 LT-165 (2003) Page 1 of 31 Carburetor 13A2693G190 LT-165 (2003) Page 2 of 31 Carburetor TC-640330 1 S Carburetor (Incl 184 of Engine Parts Lists) 1 TC-640035 1 Throttle Shaft & Lever Assembly
More information#800 to #899 Sportsman Super Stock Truck Technical Specifications
#800 to #899 Sportsman Super Stock Truck Technical Specifications DEFINITION A two wheel drive, standard size pickup. The truck must be of stock production that has been produced in quantities of at least
More informationdog hollow speedway official 2014 crate late model rules
dog hollow speedway official 2014 crate late model rules 1. ENGINE GM PART NUMBER 88958602 & GM PART NUMBER 88958604. THESE ENGINES ARE SEALED AT THE INTAKE MANIFOLD, CYLINDER HEAD, FRONT COVER, AND OIL
More information珈沣机械 J &F CATALOGUE-2014 MACHINE AND PARTS EXPORTER AND SUPPLIER. Quality First, Cost reasonable, Goods competitive.
珈沣机械 J F Engineering Machinery Co.,Ltd. www.jiafl.com J &F CATALOGUE-2014 MACHINE AND PARTS EXPORTER AND SUPPLIER Quality First, Cost reasonable, Goods competitive. 1 Wacker Copy BS600 Copy BS52Y Copy
More informationGLENFORD LIONS CLUB AUGUST 1, 2015 GARDEN TRACTOR CLASSES weigh in at 10am pulling starts 11am LAWN STOCK CLASSES 12 HP AND UNDER-1050# adamsville
GLENFORD LIONS CLUB AUGUST 1, 2015 GARDEN TRACTOR CLASSES weigh in at 10am pulling starts 11am LAWN STOCK CLASSES 12 HP AND UNDER-1050# adamsville rules 16 HP AND UNDER -1050# adamsville rules SUPER STOCK
More information2017 Senoia Raceway Rulebook Crate Late Model
All drivers must adhere to the general rules, in addition to the division specific rules set forth below. ENGINE SETBACK 1. Engine setback will be 6 inches from center of top ball joint to the most forward
More informationSmall Engine Parts. Super 2 Chain Saw UT Page 1 of 12 Engine Internals
Small Engine Parts Super 2 Chain Saw UT-10654 Page 1 of 12 Engine Internals Super 2 Chain Saw UT-10654 Page 2 of 12 Engine Internals Ref # Part Number Qty Description 1 A95072 1 CRANKCASE & CYLINDER ASSY.
More informationSHEET DESCRIPTION PAGE NO. NO.
CONTENTS SHEET DESCRIPTION PAGE NO. NO. E-1 CYLINDER BLOCK, LINER AND OIL SUMP 2 E-2 CYLINDER HEAD 6 E-3 PISTON AND CONNECTING ROD ASSY 10 E-4 CRANK SHAFT 12 E-5 TIMING GEAR COVER & SEALING 14 E-6 TIMING
More informationBSA Goldstar Parts - Price List Feb Exhaust Lifter Cable Exhaust Lifter Cable Holder S/S 9.00
Rocker Boxes 65-1137 Exhaust Lifter Cable 15.00 65-1163 Exhaust Lifter Cable Holder S/S 9.00 2-443 Exhaust Lifter Cable Holder Nut S/S 0.50 65-401 Exhaust Lifter Spindle Felt 2.00 65-387 Exhaust Lifter
More informationLarry King Law s Langley Speedway 2018 Super Street Division Rules
Larry King Law s Langley Speedway 2018 Super Street Division Rules 1. COMPETING MODELS: A. Any American made 1979 through 1988 two door, coupe with a minimum 108 inch wheelbase. B. Cars must have a full
More informationMfg. No:
Parts Manual Mfg. No: 220707-0142-99 Copyright 2017 Briggs and Stratton. All Rights reserved 22-Jun-2017 Model Components Table Of Contents Page Blower Hsg, Sump, Oil Fill.............................................................................
More informationFor Discount Tecumseh Engine Parts Call or V J Page 1 of 8 Engine Parts List #1
V60-70346J Page 1 of 8 Engine Parts List #1 V60-70346J Page 2 of 8 Engine Parts List #1 1 34177 0 Cylinder Assy. (2-5/8" Bore) 2 27652 0 Pin, Dowel 3 31461 0 Bushing, Crankshaft 4 27876B 0 Seal, Oil 5
More informationINFORMATION SHEET Mopar A-8 Aluminum Race Engine Block PART NUMBER P AB, P AB, P , or P
Engine Block Components (1) Aluminum Engine Block (8) Cylinder Sleeves (installed) (1) Hardware Kit (1) Set of Main Caps (1) Set of Main Cap Fasteners Part Numbers Deck Nominal Max Over Part # Height Bore
More informationCurrent Price List Jan 2013
Crankshafts Current Price List Jan 2013 Pearson Flywheel Assembly standard ⅞ T/S Shaft 1⅛ D/S Shaft, Carrillo Con-Rod balanced to your Piston. 88 Stroke for Gold Star Crankcases. Direct replacement. 800.00
More informationFor Discount Tecumseh Engine Parts Call or V H Page 1 of 8 Engine Parts List #1
V60-70291H Page 1 of 8 Engine Parts List #1 V60-70291H Page 2 of 8 Engine Parts List #1 1 33361A 0 Cylinder Assy. (2-5/8" Bore) 2 27652 0 Pin, Dowel 3 31461 0 Bushing, Crankshaft 4 27876B 0 Seal, Oil 5
More informationWingless Limited Sprint Rules CHASSIS
Wingless Limited Sprint Rules CHASSIS 1. Any type of sprint car chassis is allowed that has a minimum of 84 inches and a maximum 90 inches, measured from center of the front hub to the center of the rear
More informationWheel Horse 13 32H Rear Engine Rider
Form No. 3328 619 Wheel Horse 13 32H Rear Engine Rider Model No. 70184 220000001 and Up Parts Catalog Ordering Replacement Parts To order replacement parts, please supply: the part number, the quantity,
More informationLIST NO. F088 ENGINE. GRASS TRIMMER / BRUSH CUTTER Model TCG 23ECP (TANAKA BRAND) (E1) A 57
ENGINE GRASS TRIMMER / BRUSH CUTTER Model (TANAKA BRAND) LIST F088 2016 4 29 (E1) 9 10 11 12 4 13 1 2 5 6 14 15 16 17 18 19 20 3 7 24 21 8 22 48 49 50 51 52 A 57 58 25 26 27 28 29 30 23 53 59 63 61 60
More informationGENSET ENGINE-G25/30. ITEM PART NO. DESCRIPTION QTY QTY REMARKS No. G25 G30
ITEM PART NO. DESCRIPTION QTY QTY REMARKS No. G25 G30 1 CONTENTS SHEET DESCRIPTION PAGE NO. NO. E-1 CYLINDER BLOCK, LINER AND OIL SUMP 2 E-2 CYLINDER HEAD 6 E-3 PISTON AND CONNECTING ROD ASSY 10 E-4 CRANK
More informationCrisp Motorsports Park Watermelon Capital Speedway Race Rules Race Car Super Street Class
Crisp Motorsports Park Watermelon Capital Speedway Race Rules Race Car Super Street Class Page 1 of 6 2017 Super Street Rules Vehicle 1. Any 1960 or newer sedan. 2. Chassis and suspension must remain completely
More informationReplacement Engine Kit Diesel-Powered Workman 3000/4000 Series Utility Vehicle
Form Number 3362-384 Rev A Replacement Engine Kit Diesel-Powered Workman 3000/4000 Series Utility Vehicle Model No. 117-4986 Parts Catalog Ordering Replacement Parts To order replacement parts, please
More informationGen4 EFI System. Completely redesigned with an extensive new list of features and all new software.
Gen4 EFI System Completely redesigned with an extensive new list of features and all new software. Increase Power Low-End Torque Throttle Response Cleaner Emissions Increase MPG Easy Starting Take full
More informationPARTS MANUAL SUPPORTED BY HUSTLER TURF EQUIPMENT AND EXCEL INDUSTRIES, INC.
SHIBAURA DIESEL ENGINE MODEL: N843 and N843L PARTS MANUAL SUPPORTED BY HUSTLER TURF EQUIPMENT AND EXCEL INDUSTRIES, INC. Table of Contents Chapter 1 General Information....................................
More informationPower Clear Snowthrower
Form Number 3358-364 Rev B Power Clear Snowthrower Model No. 38582-280000001 and up. Parts Catalog Ordering Replacement Parts To order replacement parts, please supply the part number, the quantity, and
More informationC 0 Valve, Exhaust (1/32" oversize) C 0 Valve, Exhaust (Standard) (Conventional
H30-35359P Page 1 of 8 Engine Parts List #1 H30-35359P Page 2 of 8 Engine Parts List #1 1 34708A 0 Cylinder Assy. (2-1/2" Bore) 2 26727 0 Pin, Dowel 3 27642 0 Plug, Drain 4 32600 0 Seal, Oil 5 29314B 0
More informationMAINTENANCE STANDARDS TABLE
TABLE 4 MAINTENANCE STANDARDS TABLE Unit: mm [in.] ( Maximum rpm, (no-load) Minimum rpm, (no-load) According to engine specification Adjust governor setting. Compression pressure MPa (kgf/cm 2 ) [psi]
More informationIllustrated Parts List
FORM MS 2263 12/08/2004 REPLACES FORM MS 2263 03/20/2004 FILE IN SECT. 2 OF SERVICE MANUAL Illustrated Parts List Model Series TYPE NUMBERS 0001 through 1421. TABLE OF CONTENTS Air Cleaners........................
More information5.7L ENGINE PARTS BOOK. Not for. Reproduction
5.7L ENGINE PARTS BOOK Engine Model: Engine Family: PSI, Industrial Engine Spec N.: 39004120-39004248 Parts Book Revision: December, 2015 TABLE OF CONTENTS SECTION PAGE CYLINDER BLOCK... 3-5 CYLINDER HEAD...
More informationKJ Motor/Pump Assembly. Jetter. Printed in U.S.A. Ridge Tool Company/Elyria, Ohio, U.S.A.
KJ-000 Motor/Pump Assembly NOTE: Order parts by Number Only. 0 0 0 Gasoline Engine, Hp Manual Start 0 Gasoline Engine, Hp Electric Start Decal, Warning 0 Decal, Fuel Warning Decal, Model. KJ-000 Key, /
More information