2.33" (59.3 mm) 0.20" (5.1 mm) surge suppressor surge suppressor and test plug socket Certifications CSA IEC CSA IEC CSA IEC 300V AC/DC AC/DC
|
|
- Philomena Dorsey
- 6 years ago
- Views:
Transcription
1 Bulletin Screw Connection Terminal Blocks Plug-In Style Terminal Blocks Dimensions are not intended to be used for manufacturing purposes. Note: Height dimension is measured from top of rail to top of terminal block.." (. mm) -JDPTP -JDPSS -JDPSSTP." (. mm)." (. mm)." (. mm)." (. mm)." (. mm) Two-circuit selectable component Two-circuit selectable component Two-circuit selectable component Specifications plug-in terminal block with test plug plug-in terminal block with internal plug-in terminal block with internal socket surge suppressor surge suppressor and test plug socket Certifications CSA IEC CSA IEC CSA IEC Voltage Rating V AC/DC V AC/DC." (. mm)." (. mm) V AC/DC V AC V AC/DC." (. mm) V AC/DC Maximum Current A A A A A A Wire Range (Rated Cross Section) # # # # # #. mm. mm AWG AWG AWG AWG AWG AWG. mm Wire Strip Length. in. ( mm). in. ( mm). in. ( mm) Recommended Tightening Torque. lb in (. N m). lb in (. N m). lb in (. N m) Density pcs/ft ( pcs/m) pcs/ft ( pcs/m) pcs/ft ( pcs/m) Housing Temperature Range - + F (- + C) - + F (- + C) + F ( + C) Short-Circuit Current Rating See page - Terminal Blocks Pkg Qty. Pkg Qty. Pkg Qty. Color: Grey -JDPTP -JDPSS -JDPSSTP Accessories Pkg Qty. Pkg Qty. Pkg Qty. Mounting Rails: m Symmetrical DIN (Steel) -DR -DR -DR m Symmetrical DIN (Aluminum) -DR -DR -DR m Hi-Rise Sym. DIN (Aluminum) -DR -DR -DR m Angled Hi-Rise Sym. DIN (Steel) -DR -DR -DR End Barriers -EBJDP -EBJDP -EBJDP End Anchors and Retainers: Screwless End Retainer -ERL -ERL -ERL DIN Rail Normal Duty -EAJ -EAJ -EAJ DIN Rail Heavy Duty -EAHJ -EAHJ -EAHJ Jumpers: Screw Center Jumper -Pole -CJJ- -CJJ- -CJJ- Screw Center Jumper -Pole -CJJ- -CJJ- -CJJ- Screw Center Jumper -Pole -CJJ- -CJJ- -CJJ- Screw Center Jumper -Pole -CJJ- -CJJ- -CJJ- Screw Type Jumper Notching Tool -T -T -T Other Accessories: Partition Plate -PPJDP -PPJDP -PPJDP Test Plug -TP -TP Disconnect Plug -DPL -DPL -DPL Component Plug -CPL -CPL -CPL Fuse Plug Without Blown Fuse Indicator -FPK -FPK -FPK V Blown Fuse Indicator -FPK -FPK -FPK V Blown Fuse Indicator -FPK -FPK -FPK V Blown Fuse Indicator -FPK -FPK -FPK V Blown Fuse Indicator -FPK -FPK -FPK Group Marking Carrier -GM -GM -GM Marking Systems: Snap-in marker cards -SMX (/card) -SMX (/card) -SMX (/card) Snap-in marker cards -MX (/card) -MX (/card) -MX (/card) Publication A-CAA-EN-P -
2 Bulletin Screw Connection Terminal Blocks Short-Circuit Curr ent Ratings Fuse Ratings -J -JP -JDSS -JD -JDC -JGTW -JDGC -JG -JF -JTW -JC -JDC -JKD -JDFB -JDF -JDGFB -JDPSSTP -JDPTP -JDGP -JDGPSS -JDGPSSTP -JDGPTP -JDG -JDPSS -JDP -J -JG -JKD -JTW -JQ -JGTW -JGQ -JKDTW -JKDQ -JKDTP -JDC -JD -JKDQTP -JKDTWTP -JSD -JKD -JCTB -J -JG -J -JG -J -JG -JND -J -JG -J -JG -J -JG -J -JG Wire Range Cu [AWG] Overcurrent Protection Fuse Required Class/Max. Current Rating [A] Maximum Line Load J T RK RK G CC Voltage [V] SCCR, RMS SYM [A],,,,,,, / /, / /, /.../ /.../, / /, - Preferred availability cat. nos. are bold. Publication A-CAA-EN-P
3 Bulletin Screw Connection Terminal Blocks Short-Circuit Current Ratings Overcurrent Ratings Wire Range Cu [AWG] (Line and Load) Overcurrent Protection Device Required Max. Current [A] SCCR, RMS Sym A Y/V SCCR, RMS Sym. A V+ -JTW M-DE-,, -JC M-CE-B,, -JDC M-CE-B,, -JF M-CE-B,, -JDF M-CE-B,, -JKD M-CE-B, -JDFB M-CE-A,, -JDGFB M-CE-C, -JDPSSTP MCE-C, -JDPTP -JDGP -JDGPSS -JDGPSSTP -JDGPTP -JDG -JDP -JDPSS -JKD M-FE-,, -JSD M-DE-C,, -JCTB M-DE-C,, M-DE-C, M-DE-C, M-DE-B,, M-CE-B,, M-CE-B,, M-CE-B,, M-CE-B,, M-CE-B, M-CE-C, M-CE-C, M-CE-A,, -J -JG -J -JG -JND -J -JG -J -JG Wire Range Cu [AWG] (Line and Load) Overcurrent Protection Device Required Max. Current [A] SCCR, RMS Sym A V+ SCCR, RMS Sym. A Y V+ M-HP-,, M-HP-,, M-HP-,, / M-HP-,, Wire Range Cu [AWG] (Line and Load) Overcurrent Protection Device Required Max. Current [A] SCCR, RMS Sym A V+ SCCR, RMS Sym. A V+ -J / U-JX, / U-JX, -J / U-JX,, Bulletin M does not have ratings at this voltage. + Voltage terminal block was tested at for respective SCCR - Preferred availability cat. nos. are bold. Publication A-CAA-EN-P
4 Bulletin Partition and Separation Plates Partition Plates and Separation Plates Partition plates allow visual and electrical separation of terminal groups and provide the necessary electrical spacing between adjacent insulated jumpers or between exposed ends of cut jumpers. Separation plates consist of flexible thermoplastic material and are used between terminal blocks to isolate adjacent center jumpers both visually and electrically. Dimensions Width x Length x Height For Use With Color. x. x. in. ( x x mm). x. x. in. (. x. x. mm). x. x. in. ( x x. mm). x. x. in. (. x x. mm). x. x. in. (. x x mm). x. x. in. (. x x mm). x. x. in. (. x. x. mm). x. x. in. (. x x mm). x. x. in. (. x. x. mm) Partition Plates Pkg Qty. -JD, JDC, JDF, JDDF, JDDR, JDRC, JDSS Grey -PPJD -JDP, JDGP Beige -PPJDP -WM, WM, WMG, WMG Grey -PPM -WMD Grey -PPMD -W, W, WG Grey -PP -W, W, WS, WTW, WG, WGS, WGS Grey -PP -WTF, WTS Beige -PPTS -J, J, J, J, JQ, JTW, JF, JGQ, JG, JGTW, JKD, JKDTP, JP, JPTP, JTC Separation Plates Grey -EBJ Blue -EBJ-B Yellow -EBJ-Y -W, W Beige -SP All -FPK Fuse Plugs Beige -SPJ - Publication A-CAA-EN-P
5 Bulletin General Accessories Photo Description For Use With Pkg Qty. Jumper Notching Tool -CJ -T Unused Pin Cover on Connection Blocks Disconnect Plug Plug-In Component Plug Fuse Plug without Blown Fuse Indication Fuse Plug V Blown Fuse Indication Fuse Plug V Blown Fuse Indication Fuse Plug V Blown Fuse Indication Fuse Plug V Blown Fuse Indication -JC, JDC -PCJC -LP, JP, JDP, JDGP, LDR -LP, JP, JDP, JDGP, LDR -LP, JP, JDP, JDGP, LDR -DPL -CPL -FPK -FPK -FPK -FPK -FPK Mini-Block Jumper Insertion Tool -LM -TAL- DIN Rail Adapter Plate for LMP Mini-Blocks -LMP -MFLM -J -JA -J -JA Auxiliary Circuit Tap -J -JA Terminal Block screwdriver with hardened mm diameter blade (Handle made from recycled material) Wire cutting tool designed to attach directly to the shaft of the -N screwdriver Used to trim poles from center jumpers and side jumpers. Used to install -SJLM- in mini blocks. Use x mm fuses and are rated for AC and DC. All mm wide terminal blocks -N -N -KWC - Preferred availability cat. nos. are bold. Publication A-CAA-EN-P
6 Bulletin Specifications Maximum number of multiple wire connections for copper conductors of the same cross-section and type for Allen-Bradley IEC Terminal Blocks. Cat. Nos. -J and L products are all recommended for one conductor per terminal. Wire range is defined in the cat. page for each of the products. In general, accessories for terminal blocks are not eligible for recognition by UL, CSA, or other third party approval agencies. The suitability of the installation must be judged in the end use application due to the wide variety of possible uses. However, accessories are designed to meet, and are tested to, the terminal block assembly requirements such as electrical spacings, etc. Wire Size [AWG] # # # # # # # # # # # # # # # # / / / Number of the Same Size Wires Per Terminal -CA -CAM -H -H -H -H -HM -J -J -JQ -J -J -JF -JP -JTW (single side) -JTW (twin side) -J -JCTB -JQ -JTW -J -J -J -JC -JD -JDDF -JDDR -JDF -JDFB -JDPSS -JDPSSTP -JDPTP -JDRB*** -JDRC -JDSS -JD -JDC -JDC -JDG -JDGFB -JDGP -JDGPSS -JDGPSSTP -JDGPTP -JDG Publication A-CAA-EN-P -
7 Bulletin Specifications Tie Point Terminal Blocks Type JDC, LDC, LDC, and LDC Description Type Rating Maximum total current flow through the terminal block Ambient temperature range Maximum working voltage Diode Terminal Blocks Type JDDR, JDDF, LDDF, and LDDR LDC JDC, LDC LDC LDC JDC, LDC, LDC A A A V V Operating All - + F (- + C) Storage All - + F (- + C) Description Symbol Type Rating Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage V (RRM) V (RWM) V (R) JDDF, JDDR, LDDF, LDDR Non-Repetitive Peak Reverse Voltage (Halfwave, single phase, Hz) V (RSM) JDDF, JDDR, LDDF, LDDR V RMS Reverse Voltage V (Rrms) JDDF, JDDR, LDDF, LDDR V Average Rectified Forward Current Single Phase, Resistive Load, Hz I (O) All. A Non-Repetitive Peak Surge Current (Surge applied at rated load) I (FSM) All A ( cycle) Maximum Forward Voltage Drop [I (F) =. A] V (F) All.V Ambient temperature range All parameters measured at F ( C). Maximum Reverse Current I (R) All μa Operating T (A) All - + F (- + C) Storage T (S) All - + F (- + C) Performance Data See this catalog, page Important-. Performance data given in this catalog is provided as a guide for the user in determining suitability and does not constitute a warranty. It may represent the result of accelerated testing at elevated stress levels and the user should correlate it to actual application requirements. Actual performance is subject to Allen-Bradley WARRANTY and LIMIT OF LIABILITY. The maximum voltage rating of the diode terminal blocks listed in the above table should not be exceeded even though the maximum reverse voltage rating of the diode alone is V. Surge Suppressor Performance Characteristics and Electrical Component Data Surge Suppressor Terminal Blocks Performance Characteristic JDSS, JDPSS, JDSSTP, JDGPSS, JDGPSSTP, LDSS Nominal Working Voltage (Volts AC or DC) Maximum AC Working Voltage RMS Continuous ( Hz) Maximum DC Working Voltage Continuous Maximum Clamping Voltage at Current I p (/ μs Pulse) V I p = A Maximum Voltage Rate of Rise Bulletin Contactors Types A B Bulletin Contactors & Starters, Size Bulletin Relays Peak Current (/ μs Pulse) A Typical Leakage Current at Nominal AC Working Voltage <. ma Metal Oxide Varistor (MOV) Maximum Clamping Voltage at Current lp (/ μs Pulse) Maximum Transient Energy Maximum Power Dissipation The total current flow through these terminal blocks (the sum of all inputs or the sum of all outputs) must not exceed the rated current for the device. J. W V Publication A-CAA-EN-P -
1.56" (39.5 mm) 0.20" (5.1 mm) Specifications terminal block Certifications CSA IEC CSA IEC CSA IEC 500V AC/DC 300V AC/DC AC/DC
Plug-In Style Terminal Blocks Dimensions are not intended to be used for manufacturing purposes. Note: Height dimension is measured from top of rail to top of terminal block.." (. mm) -JP -JPTP -JDP."
More information2.63" (65.9 mm) 0.20" (5.1 mm)
Bulletin Screw Connection Terminal Blocks Double-Level Plug-In Style Terminal Blocks Dimensions are not intended to be used for manufacturing purposes. Note: Height dimension is measured from top of rail
More information0.20" (5.1 mm) 1.79" (45.4 mm) Feed-Through terminal block with 2 plug-in comb connections on one side.
Bulletin Screw Connection Terminal Blocks Plug-In Connection Blocks Dimensions are not intended to be used for manufacturing purposes. Note: Height dimension is measured from top of rail to top of terminal
More information1.56" (39.5 mm) 0.20" (5.1 mm)
Bulletin Standard Feed-Through Blocks Dimensions are not intended to be used for manufacturing purposes. Note: Height dimension is measured from top of rail to top of terminal block.." (. mm) -J -J -J."
More information1.56" (39.5 mm) 0.20" (5.1 mm)
Bulletin Screw Connection Terminal Blocks Standard Feed-Through Blocks Dimensions are not intended to be used for manufacturing purposes. Note: Height dimension is measured from top of rail to top of terminal
More information1.56" (39.5 mm) 0.20" (5.1 mm) Specifications terminal block Certifications CSA IEC CSA IEC CSA IEC 500V AC/DC 300V AC/DC AC/DC
Bulletin Screw Connection Terminal Blocks Plug-In Style Terminal Blocks Dimensions are not intended to be used for manufacturing purposes. Note: Height dimension is measured from top of rail to top of
More informationTerminal Blocks/Wiring Systems/Signal Conditioners Table of Contents
Terminal Blocks/Wiring Systems/Signal Conditioners Table of Contents IEC Accessories and Technical Specifications DIN Mounting Rails Page - End Barriers Page - End Anchors/Retainers Page - Partition Plates
More informationTerminal Blocks/Wiring Systems/Signal Conditioners Table of Contents
Terminal Blocks/Wiring Systems/Signal Conditioners Table of Contents IEC Accessories and Technical DIN Mounting Rails Page - End Barriers Page - End Anchors/Retainers Page - Partition Plates Page - Jumpers
More informationBulletin 1492-J, -W 1492-L Type Screw Type Terminal Blocks Spring-Clamp Terminal Blocks
Bulleting IEC Terminal Blocks Overview and Regulatory Information Bulletin -J, -W -L Type Screw Type Terminal Blocks Spring-Clamp Terminal Blocks Technology Screw terminations are a time-proven method
More informationTerminal Blocks/Wiring Systems/Signal Conditioners Table of Contents
Terminal Blocks/Wiring Systems/Signal Conditioners Table of Contents Screw Connection Terminal Blocks Mini Blocks... Page - Standard Feed-Through Blocks... Page - Space-Saver Feed-Through Blocks... Page
More informationBulletin 1492 Screw Type and Spring-Clamp IEC & NEMA Terminal Blocks
Bulletin 1492 Screw Type and Spring-Clamp IEC & NEMA Terminal Blocks SCCR for Use with Fuses and Circuit Breakers UL Recognized Per UL 1059 Evaluated by UL for high-fault short-circuit current ratings
More informationBulletin 1492-J, -W 1492-L Type Screw Type Terminal Blocks Spring-Clamp Terminal Blocks
Bulleting IEC Terminal Blocks Overview and Regulatory Information Bulletin -J, -W -L Type Screw Type Terminal Blocks Spring-Clamp Terminal Blocks Technology Screw terminations are a time-proven method
More informationBulletin 1492-J, -W 1492-L Type Screw Type Terminal Blocks Spring-Clamp Terminal Blocks
Bulleting IEC Terminal Blocks Overview and Regulatory Information Bulletin -J, -W -L Type Screw Type Terminal Blocks Spring-Clamp Terminal Blocks Technology Screw terminations are a time-proven method
More informationBulletin 1492-J, -W 1492-L Type Screw Type Terminal Blocks Spring-Clamp Terminal Blocks
Bulleting IEC Terminal Blocks Overview and Regulatory Information Bulletin -J, -W -L Type Screw Type Terminal Blocks Spring-Clamp Terminal Blocks Technology Screw terminations are a time-proven method
More informationTerminal Blocks/Wiring Systems/Signal Conditioners Table of Contents
Terminal Blocks/Wiring Systems/Signal Conditioners Table of Contents IEC Accessories and Technical Specifications DIN Mounting Rails Page - End Barriers Page - End Anchors/Retainers Page - Partition Plates
More informationSCREW CONNECTION TERMINAL BLOCKS
Terminal, IEC Catalogs > Industrial Controls Catalog > Terminal and Wiring Systems > Terminal, IEC > Screw Connection Terminal SCREW CONNECTION TERMINAL BLOCKS Introduction Sensor Thermocouple Mini- Grounding
More informationTerminal Blocks/Wiring Systems/Signal Conditioners Table of Contents
Terminal Blocks/Wiring Systems/Signal Conditioners Table of Contents IEC Accessories and Technical Specifications DIN Mounting Rails Page - End Barriers Page - End Anchors/Retainers Page - Partition Plates
More informationTerminal Blocks/Wiring Systems/Signal Conditioners Table of Contents
Terminal Blocks/Wiring Systems/Signal Conditioners Table of Contents IEC Accessories and Technical Specifications DIN Mounting Rails Page - End Barriers Page - End Anchors/Retainers Page - Partition Plates
More informationBulletin 1492-J, -W 1492-L Type Screw Type Terminal Blocks Spring-Clamp Terminal Blocks
Bulleting IEC Terminal Blocks Overview and Regulatory Information Bulletin -J, -W -L Type Screw Type Terminal Blocks Spring-Clamp Terminal Blocks Technology Screw terminations are a time-proven method
More informationBulletin 1492 IEC Terminal Block Accessories Marking Systems
Bulletin IEC Terminal Block Accessories Marking Systems Marking Solutions Marking Solutions from Rockwell Automation enable efficient identification of terminal blocks and other components. The Allen-Bradley
More informationN0N A 250V One-Time Class H Fuse
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-794 Fax: 936-560-4685 AllenWatson@elliottelectric.com N0N 250V One-Time Class H Fuse Catalog Number Manufacturer Description Weight per unit
More informationFused Disconnect Terminal Blocks for Miniature Fuses with CAGE CLAMP connection, Series
28 Fused Disconnect Terminal Blocks for Miniature Fuses with CAGE CLAMP connection, Series 281... Blown fuse indication Exchange of fuse Blown fuse indication by LED or neon lamp Before exchanging the
More information1492-CB 1492-GH 1492-GS
1 The Allen-Bradley Line of Devices Allen-Bradley offers 3 different lines of Circuit Breakers (Supplementary Protectors) and a line of branch circuit rated Fuse Holders. Allen-Bradley Thermal Magnetic
More informationSelection Guide. Control Circuit and Load Protection
Selection Guide Control Circuit and Load Protection Circuit Protection Portfolio 1489-M Circuit Breakers Approved for branch circuit protection in the United States and Canada, and certified as Miniature
More information5 mm contact pin pitch PCB or 95 series sockets
1. = 12.4 1. = 12.4 44 Series - Miniature PCB relays 6-10 A Features 44.2 44.62 2 Pole relay range 44.2-2 Pole 6 A ( mm pin pitch) 44.62-2 Pole 10 A ( mm pin pitch) PCB mount - direct or via PCB socket
More informationAF09... AF38 4-pole Contactors AC / DC Operated - with Screw Terminals
AF09... AF38 4-pole Contactors AC / DC Operated - with Screw Terminals 25 to 55 A culus CE Application AF09... AF38 4-pole contactors are used for controlling power circuits up to 600 V AC and 240 V DC.
More informationSwitches Unlimited Phone: * Fax:
For Info: sales@switchesunlimited.com www.switchesunlimited.com Phone: 800-1-0487 Fax: 718-67-6370 Page -4 Page -8 THREE-POLE CONTACTORS IEC Ith ratings in AC1 duty at 40 C: 16 to 1600A IEC Ie ratings
More informationPage 2-4 Page 2-8. Page Page 2-13
Page -4 Page -8 THREE-POLE CONTACTORS IEC Ith ratings in AC1 duty at 40 C: 16 to 1600A IEC Ie ratings in AC3 440V duty: 6 to 630A IEC Power ratings in AC3 400V duty:. to 335kW UL/CSA ratings: 3 to 500HP
More informationPOWER TERMINAL BLOCKS
Terminal Blocks and Wiring Systems Catalogs > Industrial Controls Catalog > Terminal Blocks and Wiring Systems > Power Terminal Blocks POWER TERMINAL BLOCKS Introduction Standards Compliance High Fault
More informationAdd-on blocks and accessories For BG series mini-contactors For BF series contactors For B series contactors...
Three-pole versions up to 630A in IEC AC3 duty Four-pole versions up to 1600A in IEC AC1 duty Versions for power factor correction up to 100kvar at 400VAC Four-pole versions with NO+NC or 4NC main poles
More informationStandard Power Distribution Blocks With High Short-Circuit Current Ratings
427 Van Camp Road P.O. Box 468 Bowling Green, OH 43402 Standard Power Distribution Blocks With High Short-Circuit Current Ratings Marathon offers 600 Volt Power Distribution Blocks with high SCCR s in
More informationUp to 60 A Class R 250 V and 600 V ferrule power distribution fuse blocks
Technical Data 09 Effective June 06 Up to 60 A Class R 50 V and 600 V ferrule power distribution fuse blocks Catalog symbols: RM5060-_MW_ RM60030-_MW_ RM60060-_MW_ Features and benefits: Combination power
More informationGV2, GV3, and GV7 Manual Motor Starters, Controllers, and Protectors Standard Features
Standard Features Table : Standard Features GV2ME GV2P GV3P GV7RE/GV7RS 0. to 32 A Up to 20 hp @ 460 V 0 SCCR @ 480 V Push Button Operator 0. to 30 A Up to 5 hp @ 460 V 50 SCCR @ 480 V Rotary Handle Operator
More informationLow-Peak 600V Class RK1
LPS-RK 600Vac/300Vdc, 1 10-60A, Dual Element, Time-Delay Fuses Dimensions - in 5" (± 0.31) 5.5" (± 0.31) Available with easyid open fuse indication 1/10 to 30A 0.81" (±0.008) 35 to 60A 1.06" (±0.008) Description:
More informationonlinecomponents.com
100 Van Camp Road P.O. Box 468 Bowling Green, OH 4402 Standard Power Distribution Blocks With High Short-Circuit Current Ratings offers 600 Volt Power Distribution Blocks with high SCCR s in response to
More informationApproved Standards. Ordering Information. Mini Motor Contactor J7KNA. Model Number Legend. Main contactor. Accessories. Mini Motor Contactor J7KNA 1
Mini Motor Contactor J7KNA ) Main contactor AC & DC operated Integrated auxiliary contacts Screw fixing and snap fitting (35 mm DIN-rail) Range from 4 to 5.5 (AC 3, 380/415V) 4 -main pole version (4 AC
More informationBulletin 100-D IEC Contactors
Bulletin 100-D IEC Contactors Electronic and conventional coils AC & DC Integrated PLC interface Low power pick-up & hold-in Wide voltage ranges Complete range of accessories Environmentally friendly Compact
More informationClass R 250V and 600V modular ferrule and knifeblade fuse blocks
Technical Data 1048 Class R 2V and 600V modular ferrule and Knifeblade fuse blocks from 100 to 600 amps feature phase barriers between poles for additional safety with up to four mounting holes per pole
More informationLPSRK100SP 100A 600V TD Dual Elem Class RK1 Low Peak Fuse
LPSRK100SP 600V TD Dual Elem Class RK1 Low Peak Fuse Catalog Number Manufacturer Description Weight per unit Product Category LPSRK100SP 600V Class RK1 Low Peak Dual Element, Time Delay Fuse 0.4100 (lbs/each)
More information1.5KE SERIES Taiwan Semiconductor
Transient Voltage Suppressor FEATURES - Excellent clamping capability - Low dynamic impedance - 1500W surge capability at 10 / 0 μs waveform - Fast response time: Typically less than 1.0ps from 0 volt
More informationCO (DPDT) 16/25 250/ /440 2,000 4, /0.5/ /0.5/ (5/5) 300 (5/5) AgNi
46 Series - Miniature industrial relays 8-16 A Features 46.52 46.61 1 & 2 Pole relay range 46.52-2 Pole 8 A 46.61-1 Pole 16 A Socket mount or direct connection via Faston connectors AC coils & DC coils
More informationDBL distribution blocks 3x1 pole
TECHNICAL DATASHEET 1SNC166019D0201 - CATALOGUE PAGE 1SNC166020S0201 DBL distribution blocks 3x1 pole 84.6 3.33" 25 0.98" 32.5 1.28" 28.2 1.11" 23.5 0.93" 14.7 0.58" 36.3 1.43" 75 2.95" 62 2.44" 50.7 2"
More informationAF09... AF30 3-pole Contactors up to 25 HP / 600 VAC
AF09... AF0 -pole Contactors up to 25 HP / 600 VAC Contactors and Overload Relays Overview.../0 AF09... AF0 -pole Contactors.../2 Main Technical Data.../8 Main Accessory Fitting Details.../2 Main Accessory.../24
More information1489-M Circuit Breakers
Dual terminals provide wiring/bus bar flexibility and clamp from both sides to improve connection reliability Terminal design helps prevent wiring misses Scratch- and solventresistant printing Suitable
More information0.8 U N /0.5 U N 0.8 U N /0.5 U N 0.8 U N /0.5 U N 0.2 U N /0.1 U N 0.2 U N /0.1 U N 0.2 U N /0.1 U N
55 Series - General purpose relays 7-10 A 55 Features 55.12 55.13 55.14 Printed circuit mount, general purpose 2, 3 & 4 Pole relays 55.12-2 Pole 10 A 55.13-3 Pole 10 A 55.14-4 Pole 7 A AC coils & DC coils
More information8WH2 Spring-Loaded Terminals
8WH2 Spring-Loaded Terminals /2 Introduction /3 General data on 8WH /7 8WH through-type terminals 1) /18 8WH hybrid through-type terminals 1) /21 8WH fuse terminals /23 8WH isolating blade terminals /25
More information8WH2 Spring-Loaded Terminals
8WH2 Spring-Loaded Terminals /2 Introduction /3 General data on 8WH /7 8WH through-type terminals 1) /18 8WH hybrid through-type terminals 1) /21 8WH fuse terminals /23 8WH isolating blade terminals /25
More informationAF / AF12Z pole Contactors AC / DC Operated - with Screw Terminals
Technical Datasheet 1SBC101404D0201 24/03/11-30-10-.. / Z-30-10-.. 3-pole Contactors AC / DC Operated - with Screw Terminals (Z) contactors are used for controlling power circuits up to 690 V AC and 220
More informationClass J modular ferrule and knifeblade fuse blocks
Technical Data10488 SupersedesFebruary 2016 Class J modular ferrule and knifeblade fuse blocks Knifeblade fuse blocks from 100 to 600 amps feature phase barriers between poles for additional safety with
More informationB115...B180 RF200 RFN200 B250...B400 RF400 RFN400
Page -2 Page -4 Page -6 FOR BG SERIES MINI-CONTACTORS Type RF9, phase failure sensitive, manual resetting Type RFA9, phase failure sensitive, automatic resetting Type RFN9, non-phase failure sensitive,
More information44 SERIES. PCB/Plug-in relays from 6 to 10 A
44 PCB/Plug-in relays from 6 to 10 44 2 CO power relays with high separation between adjacent contacts Direct PCB or socket mount Type 44.52 -- 2 CO 6 (5 mm pin pitch) Type -- 2 CO 10 (5 mm pin pitch)
More informationAF / AF30Z stack 3-pole Contactors AC / DC Operated - with Screw Terminals
Technical Datasheet 1SBC101415D0201 25/03/11 AF30-30-11-.. / AF30Z-30-11-.. 2-stack 3-pole Contactors AC / DC Operated - with Screw Terminals AF30(Z) contactors are used for controlling power circuits
More informationTime scale: from 0.05s to 100h Multi-function Plug-in for use with 90.02, 90.03, and sockets
86 Series - Timer modules Features 86.00 86.30 Timer modules for use in conjunction with relay & socket. 86.00 - Multi-function & multi-voltage timer module 86.30 - Bi-function & multi-voltage timer module
More informationCompact Circuit Protector
Supersedes February 2019 BUSSMANN SERIES Compact Circuit Protector (cat. no. CCP2) 2011/65/EU CCP2 switch up to 100 A 200 A CCP2 switch 400 A CCP2 switch Contents Page 30, 60 and 100 amp switches s and
More information2 pole 10 A PCB mount A1 A
Series - Miniature general purpose relays - 0 A Features Printed circuit mount, general purpose, & Pole relays. - Pole 0 A. - Pole 0 A. - Pole A AC coils & DC coils Cadmium Free contacts (preferred version)
More informationIEC TERMINAL BLOCKS. Screw Clamp Connection. Feed Through DIN Rail 433. Ground DIN Rail 439. Fuse Holder DIN Rail 445. Disconnect DIN Rail 448
CONTROL LOGIC IEC TERMINAL BLOCKS TB c3controls line of IEC terminal blocks are both innovative and user-friendly. They are simple to install and are color-coded for easy circuit identification. From standard
More informationAF40... AF96 3-pole contactors 30 to 60 hp at 480 V AC AC / DC operated with 1 N.O. + 1 N.C. auxiliary contacts
AF4... AF96 -pole contactors to 6 hp at 48 V AC AC / DC operated with N.O. N.C. auxiliary contacts Description AF4... AF96 contactors are mainly used for controlling -phase motors and power circuits up
More information[V] Common Control Transformer Control (See page 1-78 Note)
Bulletin NEM Combination Non-Reversing Starters Product Selection Circuit Breaker Type NEM Size Continuous mpere Rating [] Bulletin NEM starter sizes Overload relays: Eutectic supplied as standard, solid-state
More information40 Series - Miniature PCB relays A. Features
1. = 12.4 1. = 12.4 1. = 12.4 40 Series - Miniature PCB relays 8-10 - 16 A Features 40.31 40.1 40.2 1 & 2 Pole relay range 40.31-1 Pole 10 A (3. mm pin pitch) 40.1-1 Pole 10 A ( mm pin pitch) 40.2-2 Pole
More informationAF / AF09Z pole Contactors AC / DC Operated - with Screw Terminals
Technical Datasheet SBC042D020 06/04/ -22-00-.. / Z-22-00-.. 4-pole Contactors AC / DC Operated - with Screw Terminals (Z) contactors are used for controlling power circuits up to 690 V AC and 440 V DC.
More informationApproved Standards. Ordering Information. Mini Contactor Relays 4-pole J7KNA-AR. Model Number Legend. Main contactor. Accessories
Mini Contactor Relays 4-pole J7KN-R ) Main contactor C & DC operated 4-, 6- and 8-pole versions in different configurations Positively guided contacts Screw fixing and snap fitting (35 mm DIN rail) Rated
More informationBulletin 140M Motor Protectors
0Circuit Breaker Bulletin 140M Bulletin 140M Cat. No. 140M-C2E Cat. No. 140M-F8E Current Range 0.1...45 A With 140-CMN up to 90 A Type 2 Coordination with Bulletin 100-C Contactors UL Listed Self-protected
More informationBulletin A 1497B 1497D Type Control Circuit Transformer Machine Tool Transformer Control Power Transformer General Purpose Transformer
Bulletin, A, B, D Transformers Product Overview Transformers Bulletin A B D Type Control Circuit Transformer Machine Tool Transformer Control Power Transformer General Purpose Transformer Features Single,
More informationApplication Mini Contactors for Motors and Resistive Loads
Delivery program Contactor, 4p, 4kW/400V/AC3 Part no. DILEM4-G(24VDC) Catalog No. 012701 Eaton Catalog No. XTMF9A00TD Product range Contactors Application Mini Contactors for Motors and Resistive Loads
More informationPowerPact Circuit Breakers for Control Panel Disconnects Class 0611
Data Bulletin 0611DB0402 R04/16 05/2016 Replaces 0611DB0401 R11/11 PowerPact Circuit Breakers for Control Panel Disconnects Class 0611 Retain for future use. Introduction Certifications The electrical
More informationNF31E-.. / NFZ31E-.. Contactor Relays AC / DC Operated - with Screw Terminals
Technical Datasheet 1SBC101428D0201 28/03/11 -.. / NFZ31E-.. Contactor Relays AC / DC Operated - with Screw Terminals NF(Z) contactor relays are used for switching auxiliary and control circuits. NF(Z)
More informationAF40... AF96 3-pole contactors Technical data
Main pole - Utilization characteristics according to IEC Standards IEC 60947- / 60947-4- and EN 60947- / 60947-4- Rated operational voltage Ue max. 690 V Rated frequency (without derating) 50 / 60 Hz Conventional
More informationCompact Circuit Protector
Technical Data 10801 Supersedes August 018 BUSSMANN SERIES Compact Circuit Protector (cat. no. CCP) Contents Page 011/65/EU and specifications.... -3 Catalog numbers.... 4 Conductor information and available
More informationLPSRK30SP 30A 600V TD Dual Elem Class RK1 Low Peak Fuse
LPSRK30SP 30A 600V TD Dual Elem Class RK Low Peak Fuse Catalog Number Manufacturer Description Weight per unit Product Category LPSRK30SP 30A 600V Class RK Low Peak Dual Element, Time Delay Fuse 600 (lbs/each)
More informationMOV Transient Voltage Suppressors
MOV Transient Voltage Suppressors Description CKE, features two radial leaded MOV product lines: Standard Series High Energy Series CKE, also features three High Energy Special Package MOV products: PA
More informationMiniature Industrial relay 8-16 A
46 SЕRIES Miniature Industrial relay 8-16 utomation for blinds, grilles and shutters Elevators and lifts Shipyards Road / tunnel lighting Hoists and cranes Bottling plant Control panels Panels for electrical
More informationAF / AF16Z pole Contactors AC / DC Operated - with Screw Terminals
Technical Datasheet 1SBC101408D0201 25/03/11-30-01-.. / Z-30-01-.. 3-pole Contactors AC / DC Operated - with Screw Terminals (Z) contactors are used for controlling power circuits up to 690 V AC and 220
More informationAuxiliary contact blocks - with spring terminals Accessories
Auxiliary contact blocks - with spring terminals Accessories CA3-10S 1SBC101037F0014 Description The auxiliary contact blocks are used for the operation of auxiliary circuits and control circuits. CA3
More informationAF09... AF30 3-pole Contactors up to 20 HP / 480 VAC
AF0... AF0 -pole Contactors up to 20 HP / 480 VAC Contactors and Overload Relays Overview...2 AF0... AF0 -pole Contactors Ordering Details...4 Main Technical Data...20 DC Circuit switching...2 Main Accessory
More information94 Series - Socket overview for 55 series relays
94 Series - Socket overview for 55 series relays 94.04 See page 7 Module Socket Relay Description Mounting 99.02 94.02 55.32 Screw terminal (Box clamp) socket Panel or 35 mm rail - Coil indication and
More informationMain catalogue. SNK Series Terminal Blocks Accessories Marking Solutions
Main catalogue SNK Series Terminal Blocks Accessories Marking Solutions Summary See page 7 1SNK161026S0201 SNK Series, Terminal Blocks Screw clamp terminal blocks Accessories Marking solutions 1 A Smart
More information800 T FX 1 A1. Color Cap. No cap 1 Green 2 Black 3 Orange 4 Grey 5 White 6 Red 7 Blue 9 Yellow. Contact Block(s) Operator Position.
2-Position Push-Pull and Push-Pull/Twist Release Devices, Non-Illuminated Note: A jumbo or large legend plate is recommended, if space allows. 2-Position Push-Pull Cat. No. 800T-F6D4 2-Position Metal Push-Pull
More informationIndustrial Contactors CTX 3 3P 185A - 800A
87045 LIMOGES Cedex Telephone: +33 5 55 06 87 87 FAX: +33 5 55 06 88 88 Industrial Contactors CONTENTS PAGES 1. Description - Use... 1 2. Range... 1 3. Overall dimensions... 1 4. Installation - Connection...
More information249.1 m3/h m3/h 7.23 MW m3/h 50.0 m3/h
No Filter 81.6 % Auto 9.1 m3/h 250.0 m3/h Auto 99.7 m3/h 100.0 m3/h Auto 91.3 m3/h 92.0 m3/h Auto 40.0 m3/h 7. MW Auto 50.7 m3/h 50.0 m3/h 7.2 % Auto.6 % 45.0 % ABB NF Contactor Relays Overview...3 Ordering
More information1SVC F SVC F 0607 R100.20/30 R100.45
SIGMASWITCH Content Solid state relays Description, certificates, approvals... 163 Ordering details... 164 Technical data R111, R12x... 167 Technical data R100... 168 Technical data HDS R2... 169 Selection
More informationApplication Description
-14 Type, Intelligent Technologies (IT.) Soft Starters February 2007 Contents Description Page Type, Intelligent Technologies (IT.) Soft Starters Product Description....... -14 Application Description....
More informationAF / AF09Z pole Contactors AC / DC Operated - with Screw Terminals
Technical Datasheet 1SBC101419D0201 06/04/11-40-00-.. / Z-40-00-.. 4-pole Contactors AC / DC Operated - with Screw Terminals (Z) contactors are used for controlling power circuits up to 690 V AC and 440
More informationInstructions Contact numbers to EN Coil terminal markings to EN Integrated diode-resistor combination Coil rating 2.
Deliveryprogramme Contactorrelay,3N/O+1N/C,DCcurrent Partno. DILER-31-G-C(110VDC) Articleno. 231831 CatalogNo. XTRMC10A31E0 Product range DILER Mini-contactors Application Contactor relays Description
More informationMasterINTERFACE 39 Series - Relay interface modules
MasterINTERFACE 39 Series - Relay interface modules Common features Space saving 6.2 mm wide Connections for 16-way jumper link Integral coil indication and protection circuit Secure retention and easy
More informationAF / AF38Z pole Contactors AC / DC Operated - with Screw Terminals
Technical Datasheet 1SBC101412D0201 25/03/11-30-00-.. / Z-30-00-.. 3-pole Contactors AC / DC Operated - with Screw Terminals (Z) contactors are used for controlling power circuits up to 690 V AC and 220
More informationTeSys contactors 5. Characteristics 5. Mini-contactors TeSys LC1 SK and LP1 SK. Environment Rated insulation voltage (Ui) 5/30
Characteristics TeSys contactors Mini-contactors TeSys LC SK and LP SK Environment Rated insulation voltage (Ui) Conforming to 0, VDE 00 gr C,BS, CSA - n, UL 0 V 0 Conforming to standards IEC 0, NF C -0,
More informationInstallation Instructions
Installation Instructions (Cat. No. 1794-ASB Series B) 1 9 2 3 4, 5 6 7 8 Component Identification 1 Remote I/O Adapter module 2 Indicators 3 Communication reset pushbutton (PRL) 4 Access door to switches
More informationBulletin 193-T1 Bimetallic Overload Relays
Bulletin 193T1 Bimetallic Overload Relays Overload protection trip class 10 / 10A Phase loss protection Ambient temperature compensation Auxiliary contacts (1 N.O. and 1 N.C.) Manual/automatic reset mode
More information46 and 56 Series - Relays for railway applications 8-12 A. Features 46.52T 56.32T 56.34T
46 and 56 Series - Relays for railway applications 8-12 A Features 46.52T 56.32T 56.34T Plug-in power relays: 8 A, 2 pole 12 A, 2 and 4 pole DC coils with extended range Complies with UNI CEI 11170-3 (protection
More informationShort form catalogue. Motor protection & control
Short form catalogue Star Series Motor protection & control Motor Protection and Control up to 25 HP / 600 VAC Overview...2 Contactors and Overload Relays...11 4-pole Contactors...41 Control Relays...59
More informationUL & CSA Technical data A/AE9 A/AE/AF110, AL9 AL40 AC & DC operated
11Across the line UL & CSA Technical data A/AE9 A/AE/AF110, AL9 AL40 AC & DC operated contactor frame size A/AE/AL A/AE/AL A/AE/AL A/AE/AL A/AE/AL A/AE/AL A/AE/AF A/AE/AF A/AE/AF A/AE/AF A/AE/AF A/AE/AF
More information55 Series - Miniature General Purpose Relays 5-10 A
Series - Miniature General Purpose Relays -0 A - Plug-in or P.C.B. versions - AC or DC coils - Lockable test button and mechanical flag indicator as standard on and CO relays types - Sockets and accessories:
More informationNH fuse-links gg 500VAC top indicator/live gripping-lugs size 4, 4a
LOW VOLTAGE IEC FUSES IEC NH FUSE-LINKS FEATURES & BENEFITS Dimensions in accordance with DIN 43 62 Live tags Top indicator Lead free contact blades % cadmium APPLICATIONS gg: General purpose (protection
More informationTVS Diode Arrays (SPA Diodes) SP2502L Series 3.3V 75A Diode Array. Lightning Surge Protection - SP2502L Series. RoHS Pb GREEN.
SP202L Series 3.3V 7A Diode Array RoHS Pb GREEN Description The SP202L provides overvoltage protection for applications such as 0/00/000 Base-T Ethernet and T3/ E3 interfaces. This device has a low capacitance
More informationDATASHEET - DILMC9-10(24VDC) Technical data General. Contactor, 3p+1N/O, 4kW/400V/AC3. Catalog No Eaton Catalog No. XTCEC009B10TD.
DATASHEET - DILMC9-10(24VDC) Technical data General Contactor, 3p+1N/O, 4kW/400V/AC3 Part no. DILMC9-10(24VDC) Catalog No. 277468 Eaton Catalog No. XTCEC009B10TD EL-Nummer 4110305 (Norway) Standards IEC/EN
More informationOUR POWER TEAM. High-Current DIN-Rail-Mount Terminal Blocks for Conductors up to 185 mm 2 (350 kcmil) vibration-proof fast maintenance-free
OUR POWER TEAM High-Current DIN-Rail-Mount Terminal Blocks for Conductors up to 185 mm 2 (350 kcmil) vibration-proof fast maintenance-free BENEFITS Primary applications: Energy-intensive industries, including
More informationSelector Push Button Cat. No. 800T-K2AAXX. a b c d e f g Right Left Right Left. d, e, f, g. Contact Blocks. No contacts on operator
NEMA Push Specifications 800T/H 30.5 mm Push s Selector Push Devices (Bul. 800T only) Selector Push Cat. No. 800T-K2AAXX 800T KD 2 G J D E a b c d e f g Right Left Right Left Blank C K KA KB KC KD KE a
More informationNH fuse-links am 690VAC top indicator/live tags size 4, 4a
NH fuse-links am 69VAC LOW VOLTAGE IEC FUSES IEC NH FUSE-LINKS FEATURES & BENEFITS Dimensions according to DIN 43 62 parts 1 to 4 Non-isolated gripping lugs Double indicator Lead free contact blades %
More informationGeneral purpose relays 7-10 A
55 SЕRIES General purpose relays 7-10 utomation for blinds, grilles and shutters Control and management of electric power Shipyards Road / tunnel lighting Hoists and cranes Circuit breakers and switches
More informationAE 9... AE 40 Contactors NE... Contactor Relays
Technical data AE 9... AE 0 Contactors NE... Contactor Relays AE 9... AE 0 Contactors NE.. Contactor Relays Contents AE 9... AE 0 Contactors Description... 2 Ordering Details... 3 Technical Data... Terminal
More information